Jensen Car Stereo System JRV210 User Manual

JRV210  
MOBILE AUDIO SYSTEM  
Installation and Operation Manual  
JRV210  
INFO  
DISP  
FAV  
PTY/CAT  
MENU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
DISC NOTES  
Depending on the recording status, conditions of the disc, and the equipment used for  
recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please  
adhere to the following recommendations:  
NOTE: A disc may become scratched (although not enough to make it unusable)  
depending on how you handle it and other conditions in the usage environment. These  
scratches are not an indication of a problem with the player.  
Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.  
Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.  
Do not play a CD-RW which has been written more than 5 times.  
Compatible Disc Types  
Table 1: General Disc Information  
Diameter/  
Playable Sides  
Disc Type  
Logo  
Playback Time  
Audio CD  
12 cm single side  
74 minutes  
REWRITABLE  
RECORDABLE  
NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and  
the CD is finalized.  
Disc Maintenance  
A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe  
the disc using a clean cloth, working from the center hole towards the outside edge.  
Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.  
Insert label  
side up.  
Do not bend.  
Wipe clean from  
the center to the  
edge.  
Never touch  
the under side  
of the disc.  
Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of  
special shape CDs may cause the unit to malfunction.  
Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or  
that have sticky residue from removed stickers.  
Do not expose discs to direct sunlight or heat sources such as hot air-ducts, or leave them  
in a vehicle parked in direct sunlight where there can be a considerable rise in  
temperature inside the vehicle.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
INSTALLATION  
2. Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is  
not large enough, carefully cut or file as necessary until the sleeve easily slides into the  
opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that  
there will be sufficient space behind the dashboard for the radio chassis.  
3. Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve.  
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs  
outward as necessary to firmly secure the sleeve to the dashboard.  
Before You Begin  
1. Disconnect Battery  
Before you begin, always disconnect the battery negative terminal.  
2. Remove Transport Screws and discard.  
Important Notes  
Before final installation, test the wiring connections to make sure the unit is connected  
properly and the system works.  
Use only the parts included with the unit to ensure proper installation. The use of  
unauthorized parts can cause malfunctions.  
Consult with your nearest dealer if installation requires the drilling of holes or other  
modifications to your vehicle.  
Install the unit where it does not interfere with driving and cannot injure passengers if  
there is a sudden or emergency stop.  
If the installation angle exceeds 30º from horizontal, the unit might not give optimum  
performance.  
Avoid installing the unit where it will be subject to high temperatures from direct sunlight,  
hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.  
DASHBOARD  
TABS  
SCREWDRIVER  
MOUNTING SLEEVE  
4. Place the radio in front of the dashboard opening so the wiring can be brought through the  
mounting sleeve.  
2-DIN Front Mount  
This unit can be installed in a dashboard with an opening of the following dimensions:  
5. Follow the wiring diagram carefully and make certain all connections are secure and  
insulated with crimp connectors or electrical tape to ensure proper operation.  
6. After completing the wiring connections, reconnect battery and turn the unit on to confirm  
operation (vehicle ignition switch must be on). If the unit does not operate, recheck all  
wiring until the problem is corrected. Once proper operation is achieved, turn the ignition  
switch off and proceed with final mounting of the chassis.  
1/16 inch max  
(4 corners)  
4 3/8 inches  
7. Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is  
fully seated and the spring clips lock it into place.  
8. Test radio operation by referring to the operating instructions for the unit.  
Removing the Unit  
7 1/4 inches  
To remove the radio after installation:  
1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle’s bat-  
tery negative (-) terminal.  
1. Slide the mounting sleeve off of the chassis if it has not already been removed. If it is  
locked into position, use the removal keys (supplied) to disengage it. Insert the keys  
through the holes in the front panel as far as they will go, and then slide the sleeve off the  
back of the unit.  
2. Insert the removal keys straight into the holes on the front of the unit, as far as they will  
go.  
3. Pull the radio straight out.  
MOUNTING SLEEVE  
V
FA  
T
A
/C  
Y
U
PTY/CA  
MENU  
T
N
E
0
1
JVR210  
2
R
V
REMOVAL KEY  
V
FA  
T
A
/C  
U
PTY/CA  
MENU  
Y
E
T
N
0
1
JVR210  
2
R
V
O
F
INFO  
P
IS  
DISP  
O
F
INFO  
P
IS  
DISP  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
WIRING  
DETAIL A  
Wire Connector  
RIGHT REAR SPEAKER (+)  
RIGHT FRONT SPEAKER (+)  
LEFT FRONT SPEAKER (+)  
LEFT REAR SPEAKER (+)  
LEFT REAR SPEAKER (-)  
LEFT FRONT SPEAKER (-)  
RIGHT FRONT SPEAKER (-)  
RIGHT REAR SPEAKER (-)  
NO CONNECTION  
POWER ANTENNA  
Connect to power antenna or amplifier.  
If not used, tape bare end of wire.  
Provides 12VDC @150mA when  
radio is active.  
NO CONNECTION  
POWER ANTENNA  
+12 VDC ACCESSORY IGNITION  
GROUND  
+12 VDC ACCESSORY IGNITION  
Connect to existing radio accessory fuse  
or +12 VDC switched power source.  
GROUND  
+12V BATTERY CONSTANT  
BACKLIGHT DIMMER  
Connect to ground terminal or clean  
unpainted metal part of chassis.  
Connect to battery or 12 volt power source  
that is always live. The radio will not work if  
this wire is not connected.  
+12V BATTERY CONSTANT  
NO CONNECTION  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
BASIC OPERATION  
Mode  
3
24  
18  
Press the MODE button (4) on the control panel to select a different mode of operation, as  
indicated on the display panel. Available modes include TUNER, SIRIUS, CD, USB, IPOD and  
AUXILIARY.  
JRV210  
NOTE: IPOD or SIRIUS mode will be skipped if the module is not installed.  
23  
17  
2
Reset  
21  
12  
20  
15  
Use a ball point pin or thin metal object to press the RESET button (18). The reset button  
should be activated for the following reasons:  
16  
14  
4
initial installation of the unit when all wiring is completed  
function buttons do not operate  
error symbol on the display  
INFO  
DISP  
FAV  
26  
11  
PTY/CAT  
MENU  
13  
19  
Audio Menu  
Press the VOL/AUDIO SETTINGS control (1) on the control panel to access the Audio Menu.  
You can navigate through the Audio Menu items by pressing the VOL/AUDIO SETTINGS  
control repeatedly. Once the desired menu item appears on the display, adjust that option by  
turning the VOL/AUDIO SETTINGS control (1) within 5 seconds. The unit will automatically  
exit the Audio Menu after five seconds of inactivity. The following menu items can be adjusted.  
1
22  
Use the volume control to adjust the Bass level range from “-7” to “+7”.  
5
6
7
27  
8
9
10  
Power On/Off  
Press the power  
button (3) to turn the unit on/off.  
Volume Control  
To increase the volume, rotate the VOL/AUDIO SETTINGS control (1) clockwise. The  
maximum level is “40”.  
Treble Level  
To decrease the volume, rotate the VOL/AUDIO SETTINGS control counter-clockwise.  
Use the volume control to adjust the Treble level range from “-7” to “+7”.  
Mute  
Balance (BAL)  
Press the MUTE button (26) on the control panel to mute the audio output. “MUTE” will appear  
Use the volume control to adjust the Balance between the left and right speakers from “L12”  
(full left) to “R12” (full right).  
on the LCD display.  
Fader (FAD)  
Use the volume control to adjust the Fader between the rear and front speakers from “R12”  
(full rear) to “F12” (full front).  
Press MUTE again to restore the audio output to the previous level.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
Reset To Defaults <ENTER>: Press the TUNE/ENTER control to return the EEPROM to  
factory default set up values.  
Update Firmware <ENTER>: Press the TUNE/ENTER control to apply recent software  
updates.  
System Menu  
1. Press and hold the PTY/CAT/MENU button (13) for more than 3 seconds to enter the sys-  
tem menu.  
2. Rotate the TUNE/ENTER control (22) to highlight the desired item.  
3. Press the TUNE/ENTER control to select a value for the highlighted item.  
Equalizer  
The following feature functions can be adjusted:  
Press the EQ/LOUD button (11) to select one of the following equalization sound settings: Flat  
Rock, Classical, Pop or User.  
Key Beep (Click / Beep / Off): Turn the audible beep On/Off (heard when functions/  
buttons are selected).  
LCD Backlight (1-10): Adjust LCD brightness.  
LCD Contrast (1-10): Adjust LCD contrast.  
LCD Color (Invert/Normal)  
Tuning Region (USA / EURO): Set frequency spacing for various regions.  
Power-Off Clock (On / Off)  
Clock Format (12Hour / 24Hour): Select 12 or 24 hour display mode.  
Set Clock (HH : MM):  
Loudness  
Press and hold the EQ/LOUD button (11) to turn the loudness feature setting on/off. Loudness  
“ON” is indicated by “LD” at the bottom of the screen.  
Auxiliary Input  
To access an auxiliary device:  
1. Connect the portable audio player to the 3.5mm stereo AUX IN connector on the front  
panel (21) or to the RCA phono AUX IN cables on the back of the radio.  
Press the TUNE/ENTER control (22) to view the clock set screen.  
Rotate the TUNE/ENTER control to adjust the hour.  
Press the TUNE/ENTER control to move to the minutes field.  
Rotate the TUNE/ENTER control to adjust the minutes.  
2. Press the MODE button to select Auxiliary mode.  
3. Press MODE again to cancel Auxiliary mode and select another available playback mode.  
Press the TUNE/ENTER control to set the clock and return to the menu.  
NOTE: The front AUX input overrides the rear Auxiliary Input.  
Preset-Only Tuning (On / Off)  
Sirius Settings Menu (only appears when SIRIUS tuner is connected and in SIRIUS  
mode)  
Info/Scroll  
Clock Autoset (On / Off): Set “On” to allow auto set of clock time.  
Timezone (Atlantic / Eastern / Central / Mountain / Pacific / Alaska  
DST Enabled (Yes / No): Set “Yes” to observe daylight savings time.  
Clear Skipped <Enter>: Enter to view options (ENTER for “Yes”, MENU for “No”).  
Skipped Channels: List of Channels (Skipped / Visible)  
Set Lock Code: _ _ _ _ : Enter 4-digit code.  
Locked Channels: List of channels (Locked / Unlocked)  
Enable Song Seek (Yes / No): set “Yes” to receive song seek alerts.  
Remove Favorites: List of Favorite Songs (Enable / Disable / Delete)  
Remove All Favorites <Enter>: Enter to view options (ENTER for “Yes”, MENU for  
“No”)  
When in Sirius Satellite Radio, USB or iPod mode, press the INFO DISP button (14) to switch  
between artist and title program information.  
Remote Sensor  
Point the remote control handset (sold separately) at the remote sensor IR (2) and press the  
function keys on the handset to control the system.  
iPod Auto-Select (On / Off): Choose “On” to automatically detect and playback iPod when  
connected or “Off” to use the MODE button (4) to select the iPod source.  
Weather Alert Configuration  
Min Alert Level (All / None / Warnings / Watches)  
Auto-On Enable (Yes / No): Select “Enabled” to turn on the radio when NOAA alerts  
are issued. This function only works when the +12V switched is on.  
Alert Volume (Select Volume Level 0-40)  
Clear SAME Codes <ENTER>  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
SAME Code: _ _ _ _ _ _  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
TUNER OPERATION  
Automatic Store / Preset Scan (AS/PS/FAV)  
3
24  
18  
Automatic Store  
Select a band (if needed). Press and hold the AS/PS/FAV (15) button for more than three  
seconds to automatically select eighteen strong stations for FM or twelve for AM and store  
them in all bands. New stations replace any stations already stored in that band. After stations  
have been stored, the radio will enter Preset Scan and preview each stored station.  
JRV210  
23  
17  
2
Preset Scan  
21  
12  
20  
15  
Select a band (if needed). Press AS/PS/FAV (15) to scan stations stored in all bands. The unit  
will pause for ten seconds at each preset station. Press AS/PS/FAV again to stop scanning  
when the desired station is reached.  
16  
14  
4
INFO  
DISP  
FAV  
RBDS Operation  
This unit is equipped to display RBDS (Radio Broadcast Data Service) information when  
broadcast by the radio station.  
26  
11  
PTY/CAT  
MENU  
13  
19  
NOTE: Radio stations broadcasting RBDS may not be available in your listening area.  
1
22  
In FM radio mode, press the PTY/CAT/MENU button (13) to list the following Program Type  
(PTY) options: ANY / News / Information / Sports / Talk / Rock / Classic Rock / Adult Hits / Soft  
Rock / Top 40 / Country / Oldies / Soft / Nostalgia / Jazz / Classical / Rhythm and Blues / Soft  
Rhythm & Blues / Foreign Language / Religious Music / Religious Talk / Personality / Public /  
College / Weather / Emergency Test / ALARM! ALARM!  
5
6
7
27  
8
9
10  
To search for stations in a PTY category:  
1. Press the PTY/CAT/MENU button (13) to view the current PTY category.  
2. Rotate the TUNE/ENTER control (22) to move through the list of available categories and  
select the program type you wish to search.  
Select a Band  
Press the BAND button (16) on the control panel to change between three FM bands and two  
3. After selecting the desired PTY, press the TUNE/ENTER control (22) to search the band  
for broadcasts of this type.  
AM bands.  
Tuning  
Rotate the TUNE/ENTER control (22) clockwise or counter-clockwise to tune up or down in  
one step increments. Press the SEEK \/ (19) or SEEK /\ button (20) to seek the next strong  
station.  
NOTE: Performing a PTY search on “ANY” will Seek Tune and stop on any station  
broadcasting RBDS, regardless of the program type.  
Stereo (ST)  
Preset Stations  
The unit will automatically pick up an FM stereo signal, when available. When in stereo mode,  
the “ST” icon appears in the display. When no stereo signal is available, the unit will  
automatically revert to mono operation, and no icon will be displayed.  
Six numbered preset buttons store and recall stations for each band (FM1, FM2, FM3, AM1  
and AM2).  
Store a Station  
Tune radio to desired station. Press and hold a preset button (27) for three seconds. A beep  
tone will confirm the stored station and the preset number will appear in the display.  
Recall a Station  
Select a band (if needed). Press a preset button (27) to select the corresponding stored  
station.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
NOAA Weather Alert  
Weather Band Operation  
The Weather Alert function adds an additional level of user safety by automatically switching  
from any of the available function modes to weather band for a minimum of 60 seconds if a  
NOAA warning tone (1050 Hz) is received/detected. If no additional warning tone is received  
for 60 seconds, the unit will switch back to the last known function mode.  
What is the NOAA Weather Radio/Weatheradio Canada?  
NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that  
broadcasts local weather emergency information 24 hours a day via the National Weather  
Service (NWS) network. The U.S. network has more than 530 stations covering the 50 states  
as well as the adjacent costal waters, Puerto Rico, the U.S. Virgin Islands and the U.S. Pacific  
Territories. Each local area has its own transmitting station and there are a total of seven  
broadcasting frequencies used. A similar system is available in Canada under the Weatheradio  
Canada service administered by Environment Canada.  
The JVR210 is equipped with a weather alert level (Min Alert Level) and weather alert power  
(Auto-On Enable) feature that will cause the radio to turn on automatically when a weather  
alert is detected, adding an additional level of user safety. When the weather alert level is set to  
“All”, “Warnings” or “Watches” the weather alert function automatically switches from any of the  
available function modes (Tuner, Sirius, CD, iPod, AUX) to Weather Band when the selected  
NOAA warning type is received/detected.  
Tuning to Weatherband  
In any mode, press the WB button (17) to access the weather band (NOAA seven frequency  
broadcast). The indication "WB" will appear on the display panel, along with the current  
number and channel indication: "WB-1", “WB-2", "WB-3", "WB-4", "WB-5", "WB-6" or "WB-7".  
The seven frequencies are shown in the following table:  
See “System Menu” on page 7 to learn how to turn the WB Alert and Alert Power features on.  
SAME Decoding and Filtering  
Specific Area Message Encoding (SAME) data is also broadcast prior to alert broadcasts.  
SAME data contains information about the geographic region affected by the alert, the type of  
alert, and its effective time. The geographic region included in the SAME data is called the  
Geographical Area code and has the form PSSCCC where “P” represents a portion of the  
county, “SS” is a two-digit state, territory, or offshore marine area identifier and “CCC” identifies  
the county, province, or major metropolitan area within the state. This unit can be configured  
through the system setting menu with up to seven Geographical Area codes to limit the  
automatic tuning or power on functions described above.  
Frequency (MHz)  
Preset  
162.400  
162.425  
162.450  
162.475  
162.500  
162.525  
162.550  
2
4
5
3
6
-
SAME data also includes the type of alert being broadcast. This unit can be configured through  
the System Setting Menu to limit the automatic tuning or power on functions based on the type  
of alert.  
SAME is activated by programming a 6 digit code - called a FIPS code - into your radio. The  
FIPS code or Federal Information Processing System code is a six digit code that identifies the  
states and counties (or parishes) in the United States. The first digit identifies the county  
subdivision. The next two digits identify the state or territory, and the last three identify the  
county. The FIPS code for your area can be found by calling the NWS toll free number or  
visiting the web site.  
1
The above table also shows which preset button will access the frequency. Note that one  
frequency cannot be accessed using a preset button. The frequency can only be reached  
using the tuning controls.  
The phone number is 1-888-NWS-SAME (1-888-697-7263) Upon calling, an automated  
system will prompt you to enter your state and county. When you confirm the information, the  
system will provide your six digit FIPS code.  
Press the SEEK /\ / \/ buttons (20/19) to choose a channel from CH1 – CH7. You can also  
press the six preset buttons (27) to select CH1 – CH6 directly.  
Press the BAND (16) or MODE (4) button to exit weather band mode.  
chart, you will see a listing of all the counties in that state. For each county there is a listing of  
the SAME# (FIPS code), the location of the transmitter, the WB frequency, the call sign, the  
transmitter power and miscellaneous remarks.  
NOTE: The weather band channel frequency is fixed in preset memory and cannot be  
changed.  
How many stations can I expect to receive?  
NOTE: Because broadcast areas overlap you may want to set more than one S.A.M.E.  
location. If you live near the border between counties, you may want to receive alerts  
from more than one tower.  
Since the broadcasts are local weather and information, the transmission power is usually very  
low (much less than standard AM or FM stations) so you will usually receive only one station  
unless you are on the edge of two or more broadcast signals. The most you will receive will be  
two or three, and that is rare.  
Your radio is capable of being programmed with up to 7 different FIPS location codes. The  
default code has been programmed at the factory - 000000 - to respond to all messages within  
your area.  
Is it possible I won't receive any stations?  
Depending on where you are located, there is a possibility you will receive only a very weak  
signal or none at all. Also, similar to AM and FM signals, weatherband signals are subject to  
surrounding conditions, weather, obstructions of the signal by hills or mountains, etc.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
CD/MP3/WMA OPERATION  
MP3 Specifications  
3
24  
18  
A directory that does not include an MP3 file is skipped.  
Maximum number of folders: 512 (including skipped directories)  
Maximum number of folder levels: 12  
Maximum number of MP3 files: 999  
JRV210  
Maximum number of characters for MP3 file name and folder name: 32  
Sampling frequency: 16KHz, 22.05KHz, 24KHz, 32KHz, 44.1KHz, 48KHz.  
Bit rates: maximum 384 Kbps.  
23  
17  
2
21  
12  
20  
15  
Maximum number of Characters of ID3 Tag:  
ID3 Tag version 1.0: 32  
ID3 Tag version 2.x: 32  
16  
14  
4
INFO  
DISP  
FAV  
After loading an MP3 disc, files and folders are accessed in the order in which they were  
written by the CD writer. Therefore, the playing order may not be the same as the order  
in which they are expected to played.  
26  
11  
PTY/CAT  
MENU  
13  
19  
Controlling Disc Playback  
1
22  
Selecting Tracks  
Press the SEEK \/ (19) or SEEK /\ button (20) to advance to the next track on the disc. The  
selected track number will appear on the display. Press and hold the SEEK \/ (19) or SEEK /\  
button (20) to fast forward or fast reverse through the disc. Playback begins when the button is  
released.  
5
6
7
27  
8
9
10  
Browse Files/Folders  
For an MP3/WMA disc, press the PTY/CAT/MENU button (13) to view a list of all files/folders.  
Rotate the TUNE/ENTER control (22) to move through the list. Press the TUNE/ENTER control  
select the highlighted file/folder.  
Inserting and Ejecting a Disc  
Insert a disc, label-side up, into the disc slot (24) with the unit turned on. The unit will  
automatically draw the disc in and play the first track on the disc.  
Press the PTY/CAT/MENU button to reverse navigate and return to the root level.  
Play/Pause Disc Playback  
Press the eject button (23) to stop disc play and eject the disc. The unit does not have to be  
turned on to eject the disc.  
Press the >/|| button (26) to suspend disc play. Press the >/|| button again to resume disc Play.  
Previewing Tracks  
NOTE: The car ignition does not have to be on to insert/eject a disc.  
Press the INT button (6) on the control panel to play the first 10 seconds of each track  
sequentially. Press INT again to stop Intro Scan and resume normal play at the current track.  
Repeat Play  
Press the RPT button (5) during disc play to repeat play the current track. Press RPT again to  
stop repeat play.  
Random Play  
Press the RDM button (7) on the control panel during disc play to play all tracks in the current  
folder in random, shuffled order. Press RDM again to stop random play.  
INFO DISP Button  
During MP3 playback, press the INFO DISP button (14) to display available ID3 tag information  
to emphasize artist or song title.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
USB OPERATION  
Controlling Song File Playback  
3
24  
18  
Selecting Tracks  
Press the SEEK \/ (19) or SEEK /\ button (20) to advance to the next file. The selected file  
name will appear on the display. Press and hold the SEEK \/ (19) or SEEK /\ button (20) to fast  
forward or fast reverse through the current file. Playback begins when the button is released.  
JRV210  
23  
Browse Files/Folders  
17  
2
Press the PTY/CAT/MENU button (13) to view a list of all files/folders. Rotate the TUNE/  
ENTER control (22) to move through the list. Press the TUNE/ENTER control select the  
highlighted file/folder.  
21  
12  
20  
15  
16  
14  
4
Press the PTY/CAT/MENU button to reverse navigate and return to the root level directory.  
Play/Pause Disc Playback  
INFO  
DISP  
FAV  
Press the >/|| button (26) to suspend playback. Press the >/|| button again to resume playback.  
Previewing Tracks  
26  
11  
PTY/CAT  
MENU  
13  
19  
Press the INT button (6) on the control panel to play the first 10 seconds of each file in the  
current folder sequentially. Press INT again to stop Intro Scan and resume normal playback of  
the current file.  
1
22  
Repeat Play  
Press the RPT button (5) during disc play to repeat the current file. Press RPT again to stop  
repeat play.  
5
6
7
27  
8
9
10  
Random Play  
Press the RDM button (7) to play all files in the current folder in random, shuffled order. Press  
RDM again to stop random play.  
Inserting and Removing a USB Device  
Inserting a USB Device  
NOTE: USB port will not work with iPod. USB port will not charge all devices.  
Insert the USB device into the USB jack (12) and the unit will read the files on the USB device  
automatically.  
Removing a USB Device  
Press the MODE, WB, or BAND button, insert a CD, or connect an iPod to change to another  
mode and then remove the USB device from the USB connector.  
Accessing USB Mode  
Press the MODE button (4) to access the USB device from any other mode.  
NOTE: After loading a USB device, files and folders are accessed in the order in which  
they were written to the device. Therefore, the playing order may not be the same as the  
order in which they are expected to played.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
SIRIUS RADIO OPERATION  
The channel information display can be changed to emphasize either Artist or Song Title by  
pressing the INFO DISP button (14).  
3
24  
18  
Storing Preset Channels  
The preset buttons (27) can be used to store 6 channels per band (SIR1, SIR2 and SIR3),  
allowing convenient access to your favorite channels.  
JRV210  
23  
Programming Channels  
17  
2
1. Select the channel you want to store in memory.  
21  
12  
20  
15  
2. Press and hold a preset button (27) until the corresponding preset button number appears  
on the screen.  
3. Repeat steps 1 and 2 to program additional channels.  
16  
14  
4
INFO  
DISP  
Recalling a Preset Channel  
FAV  
Press one of the six preset buttons (27) within a selected band to tune a preset channel  
directly.  
26  
11  
PTY/CAT  
MENU  
13  
19  
Preset Scan  
Press the AS/PS/FAV button (15) to preview each stored preset channel in SIR1, SIR2 and  
SIR3 for 10 seconds. Press the AS/PS/FAV button again to stop scanning and play the current  
channel.  
1
22  
5
6
7
27  
8
9
10  
NOTE: Access to Sirius® satellite radio requires installation of a separate Sirius tuner  
and antenna. Listeners can subscribe to Sirius radio on the internet by visiting  
ready (Sirius ID is located on the Sirius tuner, sold separately). Customers can listen to  
music samples by tuning to channel 184.  
Switching to SIRIUS Mode  
Press the MODE button (4) to change the mode to Sirius Satellite Radio mode.  
Activating Sirius Satellite Radio  
Before you listen to Sirius Radio, you must subscribe to the service using your radio's  
identification number. To display the Radio ID, press the SEEK /\ or SEEK \/ button (20, 19) to  
access channel “000”. The screen displays "SID" followed by an 12 figure ID number.  
Selecting a Band  
In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in  
the following order: SIR1, SIR2, SIR3.  
Tuning a Channel  
Rotate the TUNE/ENTER control (22) clockwise or counter-clockwise to tune up or down in  
one step increments.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
8. After setting a new four digit code, you can lock channels using the “Locked Channels”  
option on the System Menu.  
9. Upon entering the Locked Channels list, you will be prompted to enter your four digit  
code.  
Favorites (Song/Artist Seek)  
This feature lets you store and search for up to 15 Artist/Song combinations on Sirius Satellite  
Radio.  
1. While the current song is playing, press and hold the AS/PS/FAV button (14).  
2. Press the TUNE/ENTER control (22) to select the Artist to be stored or press the AS/PS/  
FAV button to select the Song to be stored.  
a. Rotate the TUNE/ENTER control (22) to enter the first digit.  
b. Press the TUNE/ENTER control to move to the next digit.  
c. Repeat above steps to enter all 4 digits.  
Next time the stored artist or song is played on Sirius Satellite Radio, you will be notified with  
an alert and can then choose to tune to the channel playing the Song or Artist using the TUNE/  
ENTER control. The list of stored Artists/Songs can be managed through the System Menu  
under the “Sirius Satellite Radio” menu. See “System Menu” on page 7.  
4. After entering the code, you can navigate the list using the TUNE/ENTER control to  
highlight the channels.  
5. Press the TUNE/ENTER control to Lock (indicated by a  
icon) or Unlock ( ) the  
selected channel.  
SIRIUS Tuning Modes  
Category Mode  
1. Press the PTY/CAT/MENU button (13) to access category mode.  
2. Press the SEEK/CAT/TRK /\ / \/ buttons (20/19) to view available categories.  
Each category title and associated channels will be displayed in increments. While in the  
category mode, the individual channels within a category may be accessed by rotating the  
TUNE/ENTER control (22).  
3. Once a highlighted channel has been selected, press the TUNE/ENTER control to tune to  
that channel.  
4. While viewing a category list, press the INFO DISP button (14) to change display  
information between Channel Name, Artist, or Song Title.  
Direct Tune Mode  
1. Press and hold the TUNE/ENTER control (22) to switch to Direct Tune/Skip Channel  
mode. After accessing Direct mode, “ENTER CHANNEL NUMBER _ _ _” appears on the  
display.  
2. Turn the TUNE/ENTER control (22) to select a number for the hundreds digit position.  
3. Press the TUNE/ENTER control to confirm entry of the hundreds digit. The tens digit will  
flash on/off.  
4. Turn the TUNE/ENTER control to select a number for the tens digit position.  
5. Press the TUNE/ENTER control again to confirm entry of the tens digit. The ones digit will  
flash on/off.  
6. Turn the TUNE/ENTER control to select a number for the ones digit position.  
7. Press the TUNE/ENTER control to tune to the selected channel.  
Channel Lock  
Access Channel Lock through the System Menu under the “Sirius Satellite Radio” menu. See  
“System Menu” on page 7.  
1. Select “Set Lock Code.”  
2. No channels can be locked with the default 0000 code. To set the lock code:  
a. Rotate the TUNE/ENTER control (22) to enter the first digit of the default code.  
b. Press the TUNE/ENTER control to move to the next digit.  
c. Repeat above steps to enter all 4 digits of the default code.  
d. Rotate the TUNE/ENTER control to enter the first digit of the new code.  
e. Press the TUNE/ENTER control to move to the next digit.  
f.  
Repeat above steps to enter all 4 digits.  
g. Repeat above steps to confirm the new code.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
iPod OPERATION  
This unit is equipped with an iPod ready function that will allow you to control your iPod (if  
compatible) using the control panel control buttons. The following iPod versions are supported:  
3
24  
18  
iPod Nano (1G, 2G, 3G, 4G and 5G)  
iPod 5G  
iPod Classic  
iPhone, iPhone 3G, iPhone 3GS  
iPod Touch  
iPod Touch 2G  
JRV210  
23  
17  
2
21  
12  
20  
16  
14  
4
NOTE: iPod and iPod Cable sold separately.  
INFO  
DISP  
15  
FAV  
Jensen iPod Ready Cable  
Accessing iPod Mode  
If AUTO IPOD “ON” is selected in the system menu,  
your iPod will play automatically when connected to  
the unit. “iPod” will appear in the upper left corner of  
the display.  
26  
11  
PTY/CAT  
MENU  
13  
19  
HEAD UNIT  
1
22  
If AUTO IPOD “OFF” is selected in the system menu,  
your iPod will not play automatically when connected.  
In this case, press the MODE button (4) to change to  
IPOD mode.  
iPod  
Video  
iPod  
photo  
iPod  
iPod  
mini  
iPod  
nano  
If you press the BAND, WB or MODE button during  
iPod playback, the iPod will resume playback when  
you return to IPOD mode.  
5
6
7
27  
8
9
10  
Optional iPod Adaptor  
Controlling Playback  
Turning the iPod On/Off  
Play/Pause  
The iPod power turns on automatically when an iPod is connected to 30-pin iPod cable, as  
long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it from the  
cable or by turning the ignition off. When the ignition is turned off, the iPod will pause and then  
enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on  
or off from the iPod itself.  
Press the >/|| button (26) to suspend playback. Press the >/|| button again to resume playback.  
Selecting Tracks  
During playback, press the SEEK \/ / /\ button (19, 20) to play the previous or next track in the  
current category. Press the SEEK /\ button (20) once to play the song from the start position or  
press SEEK \/ twice to play the previous track.  
NOTE: The iPod will continuously recharge when connected to the unit, as long as the  
vehicle ignition is turned on.  
Press and hold the SEEK \/ / /\ button (19, 20) to fast reverse/forward the song. iPod playback  
will continue when the button is released.  
The track information display can be changed to emphasize either artist or song title by  
pressing the INFO/DISP button (14).  
Selecting a Playlist  
1. When an iPod is playing, press the PTY/CAT/MENU button (13) to display the playlists on  
Repeat Play  
the LCD.  
2. Turn the TUNE/ENTER control (22) to change the playlist between Artist / Album /Genre /  
Song / Audiobook / Podcast.  
3. Press the TUNE/ENTER control to confirm the selected playlist.  
4. While searching a playlist, press the PTY/CAT/MENU button (13) to navigate back  
through the list.  
Press the RPT button (5) to repeat play the current song. Press RPT again to stop repeat play.  
Previewing Tracks  
Press the INT button (6) on the control panel to play the first 10 seconds of each file in the  
current folder sequentially. Press INT again to stop Intro Scan and resume normal playback of  
the current file.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
Random Play  
During playback, press the RDM button (7) to play all songs in the current category in random  
order. Random play will begin once the current song has finished playing. Press RDM again to  
stop random playback.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
REMVRCC CARD REMOTE CONTROL (SOLD SEPARATELY)  
POWER: Powers on/off.  
MODE: Cycles through all available play  
modes (Radio, CDP, SAT, iPod, Aux).  
VOL /\ / \/: Adjusts volume level.  
AUDIO MENU: Accesses Audio and  
System Menu.  
ENTER: Enter key.  
TUNE /\ /TUNE \/: Changes frequency/  
channel by one step in AM/FM/SAT  
modes.  
P-TUNE /\ / \/: Navigate/tune to preset  
stations.  
CAT--  
CAT++  
MUTE: Mutes audio in all modes.  
WB: Directly accesses weatherband.  
BAND: Sequences bands/preset-banks  
(FM1, FM2, FM3, AM1, AM2) in Radio  
mode. Sequences preset banks (SR1,  
SR2, SR3) in satellite mode.  
AS/PS MENU: Scans all stored presets in  
SAT or radio mode (any button press  
during PS will stop the scan).  
INFO SCROLL: Sets clock. Scrolls  
information.  
|<< TRK/TRK >>|/SEEK: Select next/  
previous track, file or station. Press and  
hold to seek next/previous station.  
Navigate list in iPod mode.  
CAT-/+: Changes category in SAT/iPod mode.  
EQ LOUD: Turns on/selects preset Equalizer functions.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
CARE AND MAINTENANCE  
Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain  
minerals that can corrode the electronic circuits.  
Keep the product away from dust and dirt, which can cause premature wear of parts.  
Handle the product gently and carefully. Dropping it can damage circuit boards and  
cases, and can cause the product to work improperly.  
Wipe the product with a dampened cloth occasionally to keep it looking new. Do not use  
harsh chemicals, cleaning solvents, or strong detergents to clean the product.  
Use and store the product only in normal temperature environments. High temperature  
can shorten the life of electronic devices, damage batteries, and distort or melt plastic  
parts.  
Ignition  
The most common source of noise in reception is the ignition system. This is often a result of  
the radio being placed relatively close to the ignition system (engine). This type of noise can be  
easily detected because it will vary in intensity of pitch with the speed of the engine.  
Usually, the ignition noise can be suppressed considerably by using a radio suppression type  
high voltage ignition wire and suppressor resistor in the ignition system. (Most vehicles employ  
this wire and resistor, but it may be necessary to check them for correct operation.) Another  
method of suppression is the use of additional noise suppressors. These can be obtained from  
most CB/A radio or electronic supply shops.  
Interference  
Radio reception in a moving environment (automobile) is very different from reception in a  
stationary (home) environment. AM reception will deteriorate when passing through a tunnel or  
when passing under high voltage lines. Noise can be picked up from passing automobiles.  
Although AM is subject to environmental noise, it can received at great distances. This is  
because broadcasting signals follow the curvature of the earth and are reflected back by the  
upper atmosphere.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
TROUBLESHOOTING  
Symptom  
Cause  
Solution  
No power  
The vehicle’s ignition is not If the power supply is properly  
on  
connected to the vehicle acces-  
sory terminal, switch the ignition  
key to “ACC”.  
The fuse is blown  
Replace the fuse.  
Disc cannot be loaded or Presence of CD disc inside Remove the disc in the player  
ejected  
the player  
and insert the new one.  
Inserting the disc in reverse Insert the compact disc with the  
direction  
label facing upward.  
Compact disc is extremely  
dirty or disc is defective  
Clean the disc or try to play a new  
one.  
Temperature inside the  
vehicle is too high  
Wait until the ambient tempera-  
ture returns to normal.  
Condensation  
Leave the player off for an hour or  
so, then try again.  
No sound  
Volume is too low  
Adjust volume to audible level.  
Fader is set incorrectly  
Press AUDIO button to access  
menu and adjust Fader settings.  
Wiring is not properly con-  
nected.  
Check wiring connections.  
The operation keys do  
not work  
The built-in microcomputer  
is not operating properly  
due to noise  
Press the RESET button.  
Sound skips  
The installation angle is  
more than 30 degrees.  
Adjust the installation angle to  
less than 30 degrees.  
The disc is dirty or defec-  
tive.  
Clean the disc and try to play  
again or use new disc.  
Cannot tune to radio sta- The antenna cable is not  
Insert the antenna cable firmly.  
tion, auto-seek does not  
work  
connected.  
The signals are too weak.  
Select a station manually.  
Radio automatically  
This is a normal function. A If you do not want this to occur,  
switches to WB (Weather Weather Band warning is  
set the WB Alert setting to “OFF”  
in the System menu.  
Band)  
being received.  
Radio automatically turns This is a normal function  
on (ignition on) and tunes when the Alert Pwr feature  
If you do not want this to occur,  
set the Alert Pwr setting to “OFF”  
to WB (Weather Band)  
is set to “AUTO” in the sys- in the System menu.  
tem menu. A Weather Band  
warning is being received.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JRV210  
SPECIFICATIONS  
CD  
Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 60dB  
Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .: More than 50 dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : 20Hz - 20kHz  
CD Format Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CD-DA, CD-R, CD-RW  
FM Radio  
Frequency Range (USA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz  
Frequency Range (Europe). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz  
Sensitivity (S/N=30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4µV  
Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >45 dB  
Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >25 dB  
AM/MW  
Frequency Range (USA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530-1710KHz  
Frequency Range (Europe). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522-1620KHz  
Sensitivity (S/N=20dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 dB  
General  
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12 Volts  
Grounding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative Ground  
Speaker Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8 ohms per channel  
Tone Controls:  
Bass (at 100 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : ±10 dB  
Treble (at 10 kHz). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : ±10dB  
Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50W x 4  
Current Drain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Ampere (max.)  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 (W) x 183 (D) x 100 (H)  
Digital Media File Format Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP3, WMA  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASA Electronics Corporation  
© 2010 ASA Electronics Corporation  
v.022610  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Init TV Video Accessories IN TX100631 User Manual
Intel Computer Hardware MB898 User Manual
Intel Switch SRW224P User Manual
JBL Speaker L820 User Manual
JobSite Systems Speaker LSC 8 User Manual
JVC Car Stereo System GET0471 001A User Manual
Kenmore Vacuum Cleaner 11625914 User Manual
Kenwood Speaker KFC P507 User Manual
KitchenAid Oven KEBS177SBL04 User Manual
Klipsch Home Theater System HD 1000 User Manual