Jasco Security Camera 45231 User Manual

45231  
Home Monitoring  
Wired Color  
Camera  
User Manual  
For indoor/outdoor use. Do not use in wet locations.  
1-800-654-8483  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
CHOOSING A CAMERA MOUNTING LOCATION  
The 45231 Color Camera can be positioned on  
a desktop, or mounted to a wall. It is suitable for  
indoor or outdoor use. When choosing a mounting  
location, please be advised:  
• Do not use in wet locations. If using outdoors,  
position in sheltered location.  
• DO NOT position the camera so that it points  
directly into the sun or any bright light, as this  
may cause damage to the camera.  
• Avoid viewing areas where half the area is in  
bright sunlight and the other half is dark, such  
as in the shadow of a building. All types of  
cameras have difficulty “seeing” into areas of  
such divergent light levels.  
• In low light conditions, the camera will  
automatically activate the Infrared (IR) LED’s  
and switch the camera to Night Vision mode.  
Night Vision viewing distance is up to 10 feet.  
TESTING THE SYSTEM  
Before beginning installation, we recommend that  
you connect the 45231 Color Camera to your TV,  
VCR or DVR to help you familiarize yourself with the  
camera system and choose the best location for  
installing the camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
CONNECTING TO A TV  
The 45231 connects to the video and audio input  
jacks on the back of your TV, VCR or DVR. If you are  
not using a VCR or DVR, connect the 45231 Color  
Camera to your TV as shown below.  
TV  
Power  
Video In  
Audio In  
To view:  
1. Switch on the TV; set the volume to midpoint.  
Connect to the 45231 Color Camera.  
Note: For temporary installation you can connect the camera  
to the TV, VCR or DVR without using the 60 ft. extension cable.  
Simply connect the 3-Wire adapter cable directly to the end of  
the 6 ft. cable coming from the camera.  
2. Plug in the AC adapter and insert the yellow  
cable to the video jack and the white cable to the  
left/mono audio jack of the TV.  
3. Select the AV input on your TV by pressing the  
button labeled AV or VIDEO on either your TV or TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
remote control. You should now be able to see and  
hear the output from the camera.  
Note: You can extend the cable using the 60 ft. extension cable  
at any time to optimally locate the camera (provided the cable  
length is sufficient). The camera cable can be extended up to  
300 ft. Contact the Customer Service Group (1-800-654-8483)  
to purchase extension cables.  
CONNECTING TO A VCR or DVR  
If you using a VCR or DVR, connect the 45231 Color  
Camera as shown below:  
TV  
Power  
Video Audio  
In  
In  
VCR  
Video  
In  
Audio  
In  
Audio Video  
Out Out  
To view:  
1. Switch on the TV and VCR or DVR; Connect the  
45231 Color Camera to the VCR or DVR by connecting  
the 3-Wire adapter cable directly to the end of the  
6 ft. cable coming from the camera. Plug in the AC  
adapter and insert the yellow cable to the video jack  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
and the white cable to the left/mono audio jack. You  
can extend the cable using the extension cable at  
any time to optimally locate the camera (provided  
the cable length is sufficient).  
2. Select the VCR channel on your TV (3 or 4). This  
should be the normal channel or input you normally  
use to watch the VCR or DVR.  
3. Select the AV input on your VCR or DVR by  
pressing the button labeled AV or VIDEO on the  
VCR/DVR or on the VCR/DVR’s remote control. You  
should now be able to see and hear the output from  
the camera.  
Once your preferred mounting location has been  
chosen, disconnect the camera lead and turn off  
power to the TV, VCR or DVR and proceed to the  
Installation section.  
Infra-Red  
(IR) LEDs  
Night Vision  
The 45233 Wireless Color  
Camera features Night  
Vision technology. Objects  
and images can be seen in  
little or no light up to 10 ft.  
The camera uses a special  
Sensor  
image sensor that  
automatically detects  
available light levels.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
It turns on/off the Infra-Red (IR) LEDs on the front of  
the camera. These LEDs provide artificial light that  
allows the camera to ‘see’ in the dark. Night Vision  
will appear as a Black and White image. When the  
image sensor detects enough light, color will return  
to the images.  
INSTALLATION  
Desktop Mount:  
1. Place camera in desired location on a flat surface.  
2. Run the 60’ cable from the camera’s location to  
the location of the TV, VCR or DVR. Use the cable  
clips provided to keep the cable in place. (See Notes  
on Cable Installation.) Do not run cable inside wall;  
Take care not to pierce, puncture or cut the cable  
when securing.  
TV  
Power  
Video Audio  
In  
In  
VCR  
Video  
In  
Audio  
In  
Audio Video  
Out Out  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
3. Connect the camera cable to the TV, VCR or DVR  
by connecting the 3-Wire adapter cable to the end  
of the 60 ft. cable coming from the camera. (See  
diagram). Locate the connector on the 3-Wire  
adapter labeled ‘power’ and plug in the AC adapter.  
Insert the yellow plug to the video jack and the  
white plug to the left/mono audio jack on the TV,  
VCR or DVR.  
4. Switch on the power to the TV, VCR or DVR.  
Select appropriate AV input on TV, VCR or DVR.  
(Refer to “Connecting to a TV” or “Connecting to a  
VCR or DVR” sections.)  
5. Adjustments can now be made to the camera  
viewing angle by rotating the camera head or  
desktop mount.  
Wall Mount:  
1. Disconnect the camera’s cable.  
2. Unscrew the camera from the  
desktop base and screw on to the  
wall mount bracket.  
3. Drill three 1/8” holes in mounting  
location and insert wall anchors  
provided. Position wall bracket over  
the anchors and install screws,  
or screw directly into a stud.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
4. Run the 60’ cable from the camera’s location to  
the location of the TV, VCR or DVR. Use the cable  
clips provided to keep the cable in place. (See Notes  
on Cable Installation.) Do not run cable inside wall;  
Take care not to pierce, puncture or cut the cable  
when securing.  
5. Connect the camera cable to the TV, VCR or DVR  
by connecting the 3-Wire adapter cable to the end  
of the 60 ft. cable coming from the camera. Locate  
the connector on the 3-Wire adapter labeled  
‘power’ and plug in the AC adapter. Insert the  
yellow plug to the video jack and the white plug to  
the left/mono audio jack on the TV, VCR or DVR.  
6. Adjustments can now be made to the camera  
viewing angle by loosening the adjustment knob  
and tilting and rotating the camera head.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
NOTES ON CABLE INSTALLATION  
1. Use care when running the cable from the  
camera to the TV, VCR or DVR; when securing the  
cable, do not cut, pierce or puncture. DO NOT RUN  
CABLE INSIDE WALLS.  
2. Keep the camera cable away from other cables  
where possible, in order to reduce the risk of picture  
and audio interference.  
3. Avoid laying the cable next to any heat sources.  
4. If the cable is run along the ground, a protective  
covering must be used to prevent the cable from  
being damaged, stepped on or becoming a tripping  
hazard.  
5. If additional cable length is required, a 60 ft.  
extension cable is available; contact Customer  
Service at 800-654-8483.  
If you have any questions or feel the camera  
system is not operating correctly, or you simply  
need additional information, please visit our web  
Customer Service Group 1-800-654-8483.  
SPECIFICATIONS (Subject to change without notice.)  
AC/DC Adapter  
Power supply operating voltage................................................120V 60Hz  
Output voltage...............................................................................................9V DC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Output current............................................................................................ 400mA  
Camera  
Camera operating voltage......................................................................9V DC  
Current consumption.......................................................100mA maximum  
Camera type.............................................................................Color 1/4” CMOS  
Horizontal resolution.....................................................................360 TV lines  
High-Speed Electronic Shutter.............................................016s to 6.3us  
Lens.............................................................................5.6mm, F1.8 Fixed Focus  
Video signal output........................................................1 Vp-p into 75 Ohm  
Audio signal output.....................................................1 Vp-p into 10k Ohm  
Overall size.....................................................................................Diameter: 1.6”  
Pre-connected Cable type...........................................6 conductor cable  
Lead Connectors .............................................................6 pin mini-DIN plug  
60’ Lead Cable type..........................................................6 conductor cable  
Connectors.....................................................................6 pin mini-DIN socket  
Operating Temperature........................... 14°F to 104°F (-10°C to 40°C)  
Humidity.........................................................................................Less than 85%  
WARRANTY  
ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this  
product to be free from manufacturing defects for a period of one year  
from the original date of consumer purchase. This warranty is limited  
to the repair or replacement of this product only and does not extend  
to consequential or incidental damage to other products that may be  
used with this unit. This warranty is in lieu of all other warranties express  
or implied. Some states do not allow limitations on how long an implied  
warranty lasts or permit the exclusion or limitation of incidental or  
consequential damages, so the above limitations may not apply to you.  
This warranty gives you specific rights, and you may also have other  
rights which vary from state to state. If unit should prove defective within  
the warranty period, return prepaid with dated proof of purchase to:  
Jasco Products Company  
10 E. Memorial Road, Oklahoma City, OK 73114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
WARNING  
Risk of fire and shock  
• Only use the supplied cUL listed AC to DC adapter.  
• The supplied adapter is for indoor use only.  
• Do not run the camera cable inside walls; when securing the  
cable, do not cut or puncture  
• Do not use in wet locations  
FCC STATEMENT  
NOTE: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following  
measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician  
for help.  
Made in China  
is a trademark of General Electric Company  
and is used under license to Jasco Products Company LLC,  
10 E. Memorial Road, Oklahoma City, OK 73114  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia DVD Player NS 9DPDVD User Manual
Insignia Indoor Furnishings NS MG1158 User Manual
Insignia Portable DVD Player 10 0058 User Manual
iSymphony MP3 Docking Station M210 User Manual
Jonsered Brush Cutter BC2043 User Manual
JVC Digital Camera VN C205 User Manual
JVC Network Hardware SA DV6000 User Manual
Kenwood Two Way Radio TKR 751 User Manual
Keys Fitness Fitness Equipment KPS SPC User Manual
Keys Fitness Treadmill HT403T User Manual