COMPACT COMPONENT SYSTEM
SISTEMAS DE COMPONENTES COMPACTOS
SISTEMA DE COMPONENTE COMPACTO
CA-D702T
COMPACT
DIGITAL AUDIO
PROGRAM
/RANDOM
DISC
DISC
REPEAT
EDIT
DISC
FM
AM
PRO LOGIC
–
3CH LOGIC
TEST TONE
SHIFT
CENTER
+
+
LEVEL
CENTER MODE SLEEP
REAR
SOUND
MODE
–
LEVEL
DELAY TIME
FM MODE
ECHO
L
BALANCE
R
S.A.BASS
REPEAT
TAPE
DISC
A
1
TAPE
DISC
B
2
D
I
R
E
C
T
I
O
N
DISC
3
CD CONTROL
AUX
TAPE CONTROL
R
E
C P
A
U
S
E
+
VOLUME
–
RM-SED752TRU REMOTE CONTROL
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GVT0004-003A
[ U, UT, US, UX, UY ]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE
PARA PRODUTOS LASER /
/
REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS
/
1
1
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLO-
SURE
2
2
2
WARNING LABEL, PLACED INSIDE THE UNIT
ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE
POSTERIOR DE LA CAJA
ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTE-
RIOR DE LA UNIDAD
ETIQUETADECLASSIFICAÇÃOLOCALIZADANAPARTE
POSTERIOR DA CAIXA DO APARELHO.
ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE
INTERNA DA UNIDADE.
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
urkopplad.
strålen.
Betrakta
ej
(s)
telse for stråling
(d)
TO BEAM.
(e)
CLASS
LASER
1
PRODUCT
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to quali-
fied service personnel.
1. PRODUCTO LÁSER CLASE 1
2. PELIGRO: En el interior hay radiación láser invisible. Evite el
contacto directo con el haz.
3. PRECAUCIÓN: No abra la tapa superior. En el interior de la
unidad no existen piezas reparables por el usuario; deje todo
servicio técnico en manos de personal calificado.
1. PRODUTO LASER CLASSE 1
2. PERIGO:Olaseremiteumarediaçãoinvisívelqueéperigosa,
caso o aparelho esteja aberto e a trava inoperante ou
danificada. Evite exposição direta ao feixe dos raios.
3. CUIDADO: Não abra a caixa do aparelho. Não existem
peças reparáveis pelo usuário na parte interna da unidade.
Solicite assistência técnica somente a pessoal técnico
qualificado.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of
10 cm or more.
Precaución: el aparato debe estar bien ventilado
Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el aparato del modo
siguiente:
1 Parte delantera: No ponga nada delante, deje el espacio libre.
2 Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se detallan a
continuación.
3 Parte inferior:
Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire; para ello, coloque el
aparato sobre una base a una altura mínima de 10 cm.
Precaução: Ventilação adequada
Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:
1 Parte frontal:
Sem obstruções e espaços abertos.
2 Partes laterais/Tampa/Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões são
indicadas abaixo.
3 Parte inferior:
Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a ventilação
se este for instalado numa posição que tenha uma altura de 10 cm ou mais.
15 cm
1
15 cm
1 cm
1 cm
15 cm
15 cm
15 cm
CA-D702T
CA-D702T
10 cm
1
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
Here you will find all the information you need to set up and use the system.
For questions that are not be answered in the manual, contact your dealer.
Features
Here are some of the things that make your System powerful and easy to use.
The controls and operations have been designed to make them very easy to use, so you can spend
your time listening to music.
Easy operation
Great sound
•
With the One Touch Operation feature of JVC’s COMPU PLAY you can turn on the System and
start the radio, the Cassette Deck, or the CD Player with a single touch.
To get such great sound from such a compact package the System has:
•
Built-in Dolby Pro Logic and Dolby 3ch Logic effects. Combined with the optional center
and rear speakers, this allows you to enjoy the dynamic, pulsating sound effects of a cinema.
Programed sound mode includes live surround effects D. CLUB, HALL, and STADIUM. It also
includes S.E.A (Sound Effect Amplifier) effects ROCK, POP, and CLASSIC. You can also
register up to three customized settings (MANUAL 1 to 3).
•
Triple Tray
CD changer function can operate 3 discs.
•
•
Discs can be changed during play using the TRIPLE TRAY.
Continuous, random or program play of 3 discs.
Sing Along
You can use conventional tapes and CDs for Karaoke with the vocal masking system. With an
optional microphone, you can replace the lead singer’s voice on your favorite songs with your own.
•
Digital Echo applied to your voice through the microphone gives you a professional sound.
Three timers
The three timers, Daily Timer, Recording Timer, and Sleep Timer are extremely easy to set.
How This Manual Is Organized
In this manual we have incorporated some special features:
•
Basic information that is the same for many different functions is grouped in one place, and not
repeated in each procedure. For instance, in the section on playing a CD, we do not repeat the
information about setting the volume and the sound conditions, which are discussed in the Common
Operations section.
•
Name of buttons and controls are written in all capital letters like this: SOUND MODE.
The manual has a table of contents to help you quickly look up what you want to know.
We’ve enjoyed making this manual for you, and hope you will use it to enjoy the sound and many
features built into your System.
IMPORTANT PRECAUTIONS
1. Installation of the Unit
•
Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C or
41°F and 95°F.)
•
•
Leave sufficient distance between the Unit and a TV.
Do not use the Unit in a place subject to vibrations.
2. Power cord
•
•
Do not handle the power cord with wet hands!
Some power (12 watts) is always consumed as long as the power cord is connected to the wall
outlet.
•
When unplugging the Unit from the wall outlet, always pull the plug, not the power cord.
3. Malfunctions, etc.
•
There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and
consult your dealer.
•
Do not insert any metallic object into the Unit.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Features...................................................................... 1
How This Manual Is Organized................................. 1
IMPORTANT PRECAUTIONS ................................ 1
Fast Forward / Reverse ....................................... 22
Changing Discs While Playing........................... 22
Programing the Playing Order of the Tracks ........... 23
Checking the Program ........................................ 24
Changing the Program ........................................ 24
Random Play ........................................................... 24
Repeating a Track or the Discs ................................ 25
Tray Lock Function ................................................. 25
Locking the Trays ............................................... 25
Unlocking the Trays ...........................................25
Getting Started ................................................ 3
Accessories ................................................................ 3
Setting the VOLTAGE SELECTOR Switch.............. 3
How to Put Batteries in the Remote Control ............. 3
Using the Remote Control ......................................... 3
Connecting the FM Antenna...................................... 4
Connecting the AM Antenna ..................................... 4
Connecting the Speakers ........................................... 5
Connecting the Optional Speakers ............................ 5
Connecting Auxiliary Equipment .............................. 6
COMPU PLAY .......................................................... 6
Using the Cassette Deck (Playing) .............. 26
Regular Play ............................................................ 27
Fast Left and Fast Right ..................................... 27
Music Scan .............................................................. 27
Finding the Beginning of the Current Selection .... 27
Finding the Beginning of the Next Selection .....27
Reverse Mode .......................................................... 28
Common Operations....................................... 7
Demo Mode ............................................................... 7
Setting the Clock ....................................................... 8
Turning the Power On and Off .................................. 8
Turning the System On......................................... 8
Turning the System Off ........................................ 8
Adjusting the Volume ................................................ 8
Balance Adjustment.............................................. 9
Reinforcing the Bass Sound ...................................... 9
Sound Modes ........................................................... 10
Customizing a Sound Mode ............................... 10
When a Rear Speaker is Connected......................... 11
Adjusting the Rear Speaker Level ...................... 11
Listening to Auxiliary Equipment ........................... 12
Using the Cassette Deck (Recording) ......... 29
Things to Know before You Start Recording .....29
Standard Recording ................................................. 30
Recording AM Station to Tape .......................... 31
CD Direct Recording ............................................... 31
Auto Edit Recording ................................................ 31
Tape to Tape Recording (Dubbing) ......................... 32
How to Use DUBBING...................................... 32
Using the Timer ............................................. 33
Setting the Daily Timer ...........................................34
Turning the Daily Timer On and Off ..................35
Setting the Recording Timer.................................... 36
Turning the Recording Timer On and Off .......... 37
Setting the Sleep Timer ...........................................37
Timer Priority .......................................................... 38
Dolby Surround ............................................. 13
Preparing the Dolby Surround ................................. 14
Getting Ready to Use Dolby Pro Logic................... 15
Speaker Arrangements for Dolby Pro Logic ...... 15
Setting-up Dolby Pro Logic ............................... 15
Getting Ready to Use Dolby 3 Channel Logic ........ 16
Speaker Arrangements for
Dolby 3 Channel Logic .................................. 16
Setting-up Dolby 3ch Logic ............................... 16
Using Dolby Surround............................................. 16
Using the Microphone .................................. 39
Karaoke (Sing Along) .............................................. 39
Singing Along with Karaoke ..............................39
Digital Echo........................................................ 40
Recording Your Singing ..................................... 40
Microphone Mixing ................................................. 41
Recording Microphone Mixing .......................... 41
Playing the Microphone Sound through
Using the Tuner ............................................. 17
Setting the AM Tuner Interval Spacing .............. 17
Tuning in a Station .................................................. 17
Switching between Frequency Bands................. 18
Three Ways to Select a Station ........................... 18
Presetting Stations ................................................... 18
Changing the FM Reception Mode ......................... 19
the Speakers........................................................ 41
Recording from the Microphone ........................ 41
Care and Maintenance .................................. 42
Troubleshooting ............................................ 43
Specifications ................................................ 44
Using the CD Player ...................................... 20
Loading CDs............................................................ 21
Basics of Using the CD Player —
Continuous Play ................................................. 21
Playing a CD ...................................................... 21
Selecting a Track ................................................ 22
Locating a Track with the Remote Control
Directly ........................................................... 22
2
EN/CA-D702T[U]/f
2
98.4.15, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Accessories
Check that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
Remote Control (1)
Batteries (2)
FM Wire Antenna (1)
AC Plug Adaptor (except for Argentina) (1)
If any of these items is missing, contact your dealer immediately.
Setting the VOLTAGE SELECTOR Switch
To avoid damaging the System, set the voltage before plugging in the Unit.
Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back panel of the
System. Use a screwdriver to rotate the selector so the number the arrow is pointed at is the same as
the voltage.
How to Put Batteries in the Remote
Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6P (SUM-3)/AA (15F)
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
•
•
•
•
Remove batteries when the Remote Control will not be used for a long time.
When you need to replace the batteries, replace both batteries at the same time with new ones.
Do not use an old battery with a new one.
Do not use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use
many of the functions of the System from
a distance of up to 7m (23 feet) away.
You need to point the Remote Control
at the remote sensor on the System’s
PROGRAM
/RANDOM
DISC
DISC
REPEAT
EDIT
DISC
front panel.
Remote sensor
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
Extend the supplied FM Wire Antenna
horizontally.
FM Wire Antenna
Using an FM 75-Ohm Antenna Cable (not supplied)
If reception is poor, connect the outside antenna.
Outside FM Antenna Wire
2
1
3
Before attaching a 75-ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System,
connecting cord and the AC power cord.
Connecting the AM Antenna
AM Antenna Wire (not supplied)
If reception is poor, connect the outside antenna.
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
1
2
3
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
Refer to instructions for speakers as well when you connect speakers.
For each speaker, connect one end of the speaker wires to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
SPEAKERS
FRONT
RIGHT
LEFT
+
–
+
–
Right Speaker
Left Speaker
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near the speakers, the TV may
display irregular colors. In this case, set the speakers away from
the TV.
Connecting the Optional Speakers
Connect the optional center speaker and rear speakers.
CENTER
SPEAKER
RIGHT
REAR
CENTER
LEFT
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Auxiliary Equipment
VCR or other equipment
To listen to this source, press AUX.
AUX
RIGHT
LEFT
Now you can plug the AC power cord into the wall outlet, and your System is
at your command!
COMPU PLAY
COMPU PLAY is JVC’s feature that lets you control the most frequently used functions of the System
with a single touch.
One Touch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the
play button for that function. What One Touch Operation does for you is to turn the power on, then start
the function you have specified. If the Unit is not ready, such as no CD or tape in place, the Unit still
powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
PROGRAM
/RANDOM
CD Player DISC 1 to DISC 3 buttons
DISC
REPEAT
DISC
EDIT
CD Player 0 (Open/Close) buttons
CD £/8 button
TAPE ™ £ button
FM/AM button
DISC
COMPU PLAY
buttons
AUX button
On the Remote Control
FM button
FM
AM
PRO LOGIC
–
3CH LOGIC
TEST TONE
SHIFT
AM button
DISC 1 to DISC 3 buttons
AUX button
CENTER
+
+
LEVEL
CENTER MODE SLEEP
COMPU PLAY
buttons
REAR
LEVEL
SOUND
MODE
–
DELAY TIME
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
–
RM-SED702TXU REMOTE CONTROL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
PROGRAM
/RANDOM
SET
DISC
EPEAT
DISC
EDIT
MULTI CONTROL
DISC
STANDBY indicator
SOUND MODE
TIMER/CLOCK
SEA CONTROL
CANCEL/DEMO
PHONES
S.A. BASS
AUX
VOLUME
Display
FM
AM
PRO LOGIC
–
3CH LOGIC
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
SHIFT
CENTER
LEVEL
+
+
SLEEP
SOUND MODE indicator
REAR
LEVEL
SOUND
MODE
REAR LEVEL
–, +
–
SOUND MODE
S.A. BASS
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
BALANCE
L, R
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
AUX
+
VOLUME
VOLUME
+, –
Source, Sound Mode Volume level etc.
–
RM-SED702TXU REMOTE CONTROL
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Demo Mode
When the System is connected to an AC power outlet, a Demo automatically starts showing some of the
system’s features.
The Demo display cycles through the following items repeatedly.
•
•
•
•
•
Scrolling display of “DEMO MODE START”.
Demo of PRO LOGIC and 3CH LOGIC.
Demo of Sound Modes.
Demo of S.A. BASS.
Demo of continuous play from DISC 1 to DISC 3.
To turn the Demo off, press any of the operation buttons. “DEMO OFF” appears on the display and
the Demo automatically stops.
To turn the Demo on, press CANCEL/DEMO for more than 2 seconds.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock
Before operating the unit, set the correct time.
You can set the clock whether the Unit is on or off.
1
1. Press TIMER/CLOCK.
The hour digits begin flashing.
Flashing
2. Press 4 P. DOWN or ¢ P. UP on
the MULTI CONTROL to set the hours.
Press ¢ P. UP to increase the hour. Press 4 P. DOWN
to decrease the hour. Holding down continuously changes
the hour setting more rapidly.
2 , 4
3. Press SET.
The minute digits begin flashing.
Flashing
3 , 5
4. Press 4 P. DOWN or ¢ P. UP on
the MULTI CONTROL to set the minutes.
Press ¢ P. UP to increase the minutes. Press 4 P. DOWN
to decrease the minutes. Holding down continuously changes
the minute setting more rapidly.
5. Press SET.
“CLOCK OK” appears on the display.
The clock stops flashing, and the clock timer starts from 0 second.
If the clock is not set, “0:00” will flash instead of the clock indication.
When the time has been set, TIMER/CLOCK can be used to operate the Daily Timer and Recording
Timer.
To adjust the time once the clock has been set, press TIMER/CLOCK 5 times and follow the proce-
dure above.
CAUTION: If there is a power failure, the clock loses its setting.
The display shows “0:00”, and the clock must be reset.
Turning the Power On and Off
Turning the System On ——————————————————
Press
.
“WELCOME” appears on the display and the STANDBY indicator
goes out.
The System comes on ready to continue in the mode it was in when the power was last turned off.
If the last thing you were doing was listening to a tape in Deck B, you are now ready to listen to a
tape again in Deck B, or you can change to another source.
or
If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.
Turning the System Off ——————————————————
Press
again.
“GOOD BYE” appears on the display for a while and the STANDBY
indicator lights up. The clock time appears on the display.
Some power (12 watts) is always consumed even though the power is on standby.
To switch off the Unit completely, unplug the AC power cord from the AC outlet. When you unplug
the AC power cord, the clock will be reset to 0:00 immediately, and preset Tuner stations will be
erased in a few days.
Adjusting the Volume
Turn VOLUME clockwise to increase the volume or anticlockwise to decrease it.
Turning VOLUME quickly also adjusts the volume level quickly.
When using the Remote Control, press VOLUME + to increase the volume or press VOLUME – to
decrease it.
+
VOLUME
or
–
You can adjust the volume level between 0 and 50.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: The Volume cannot be adjusted while the Unit is on STANDBY.
DO NOT turn on the Unit and/or start playing any source without setting
the VOLUME control to 0; otherwise, the sudden blast of sound can
damage your hearing, speakers and/or headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
Balance Adjustment ————————————————————
You can use the Remote Control to adjust the left and right balance of the speakers.
SHIFT
1. Press SHIFT.
L
BALANCE
R
2. Press BALANCE L (10) or R (+10).
The display changes to show the balance adjustment.
Pressing L (10) moves the pointer to the left, pressing R (+10) moves the pointer to the right.
Display when set for no
Display when set for no
Display at the
sound from the left speaker.
sound from the right speaker.
center position.
The balance is normally set to the center position.
Note: If no adjustments are made for 2 seconds in balance adjustment mode, the display reverts to the
previous display.
Reinforcing the Bass Sound
S.A. (Signal Adaptive) BASS adjusts low tones at low volume to enhance their effect. When the volume
level is low, this enhances low tones that are normally difficult to hear and adjusts low tones to a fixed
level to reduce low tone distortion.
Press S.A. BASS.
S.A.BASS
Pressing S.A. (Signal Adaptive) BASS changes the bass setting in the following order.
= SA-BASS1 = SA-BASS2 = OFF = (back to the beginning)
or
The S.A. BASS indicator lights up, and “SA-BASS1” or “SA-BASS2” appears on the display for 3 seconds.
SA-BASS2 enhances low tones more than SA-BASS1.
To cancel the effect, press S.A. BASS until “OFF” appears on the display. The button light goes out.
To recall the previous S.A. BASS mode, press S.A. BASS once.
When listening to recording with low volume low tones, the difference between SA-BASS1 and SA-
BASS2 is clear. When listening to recording with louder low tones, however, the difference between
SA-BASS1 and SA-BASS2 may not be so clear.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
The System has some preset sound effects that give you control of the way your music sounds, so you can
tailor it for your room and for the quality of the source. We can give you some idea of how each one
affects the music, but the only way to really tell is to try them yourself.
You can also create up to three of your own customized S.E.A. (Sound Effect Amplifier) settings and
store them in the Unit’s memory (MANUAL 1, MANUAL 2, MANUAL 3).
The preset sound modes include modes using surround effects and modes using S.E.A. effects.
Sound Mode effects cannot be recorded.
To get an effect, press SOUND MODE repeatedly until the Sound Mode you want appears on the display.
The Sound Mode selected will appear on the display for three seconds. When a surround effect mode is
selected, the frame around the SOUND MODE indicator will light up. When a S.E.A. effect mode is
selected, the SOUND MODE indicator will light up.
SOUND
MODE
or
Each time you press SOUND MODE, the Sound Mode changes as follows:
= D. CLUB = HALL = STADIUM = ROCK = POP = CLASSIC = MANUAL 1 =
MANUAL 2 = MANUAL 3 = KARAOKE = OFF = (back to the beginning)
Surround effect modes
D. CLUB (Dance Club)
HALL
Increases resonance and bass.
Adds depth and brilliance to the sound, like in a concert hall.
Adds clarity and spreads the sound, like in an outdoor stadium.
STADIUM
S.E.A. effect modes
ROCK
POP
Boosts low and high frequencies.
Good for vocal music.
CLASSIC
Set for wide and dynamic sound stereo systems.
KARAOKE mode
KARAOKE
The vocal on tapes or CDs is masked for karaoke.
To cancel an effect, press SOUND MODE until “OFF” appears on the display. The SOUND MODE
indicator goes out.
To recall the previous Sound Mode, press SOUND MODE once.
Customizing a Sound Mode ————————————————
You can change an existing sound mode to suit your own preferences. These changed settings can be
stored in the Unit’s sound mode memory.
1. Select the Sound Mode you want to change.
If you select D. CLUB, HALL, or STADIUM, the surround effect remains unchanged, but you can
adjust the S.E.A. effect.
2. Press SEA CONTROL.
The low tone section of the tone equalizer flashes. Once “SEA CONT” appears, the low tone levels
will appear.
Flashing
\
Note: If no adjustments are made for 10 seconds after SEA CONTROL is pressed, Sound Mode will
appear on the display then revert to the previous display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use MULTI CONTROL to adjust to any Sound Mode desired.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select the tone range you want to
adjust. You can adjust “LOW”, “MID” or “HIGH” tone.
Flashing
Flashing
Flashing
Press TUNING DOWN 1 or ¡ TUNING UP
on the MULTI CONTROL to adjust the level.
The level can be adjusted between –3 and +3 in 7 steps.
4. Press SET.
“MANUAL 1” appears on the display.
5. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select
the MANUAL number for the memory.
6. Press SET again.
“MEMORY” appears for 2 seconds.
The setting that has been created is stored in the memory.
The adjustment you have made will apply to the sound you hear.
If you store new settings to a memory number that has already been used, the new settings replace the
existing setting.
When a Rear Speaker is Connected
If the optional rear speaker is connected, you can use the rear speaker to enjoy Surround effects when a
Surround effect (D. CLUB, HALL, STADIUM, or a MANUAL setting based on one of these) Sound
Mode is selected.
The rear speaker cannot be used when an S.E.A. effect (ROCK, POP, CLASSIC) is selected.
Front
Front
Speaker
Speaker
Rear
Rear
Speaker
Speaker
Adjusting the Rear Speaker Level—————————————
You can use the steps below to adjust the rear speaker level.
1. Select a Surround effect Sound Mode.
2. Start playback from the desired source.
3. Press SHIFT on the Remote Control.
SHIFT
REAR
LEVEL
–
+
4. Press REAR LEVEL + (8) or – (7) on the Remote Control to adjust
the rear speaker level.
Each time you press the button, the level changes one step.
•
•
You can set the level between –10 and +10 in 21 steps.
The rear speaker level changes equally for both left and right. You cannot adjust the left and right
balance for the rear speaker independently.
•
You can adjust the rear speaker level for each of the Surround effect modes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Auxiliary Equipment
By playing the sound from auxiliary equipment through the System, you can gain control over how the
music or program sounds. Once the connected equipment is playing through the System, you can apply
the sound effects.
First make sure that the auxiliary equipment is properly connected to the System. (See page 6).
1. Turn down the volume level to 0.
2. Press AUX.
“AUX” appears on the display. The AUX button on the Unit lights up.
or
AUX
COMPU PLAY
When AUX is pressed while the power is on standby, the power is automatically turned on.
3. Start playing the equipment.
4. Adjust the volume level to the desired listening level.
5. Select a Sound Mode, if you wish.
To cancel the setting
Change the source by starting any one of the System’s built-in sound sources, such as the Tuner or CD
Player.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Surround
PROGRAM
/RANDOM
DISC
DISC
REPEAT
EDIT
DISC
PRO LOGIC
/ 3CH LOGIC
Operation keys
AM
PRO LOGIC
–
3CH LOGIC
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
SHIFT
CENTER
+
+
LEVEL
SLEEP
REAR
SOUND
MODE
–
LEVEL
Display
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
Dolby Surround indicator
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
–
RM-SED702TXU REMOTE CONTROL
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Accessing the Dolby Surround Functions
Press the operation keys with green labels on the
Remote Control to use the Dolby Surround functions.
To use the function marked in green, press SHIFT
first, then press the desired operation key.
The Dolby Surround has been also developed to reproduce the important elements of the acoustic
surround at home. To watch the sound tracks of video software bearing the mark
includes the same encoded surround information as found in Dolby Stereo film, the Unit can provide you
with two Dolby Surround programs (Dolby Pro Logic and Dolby 3ch Logic).
Dolby Pro Logic: Select this mode when the optional rear speakers are connected.
Dolby 3ch Logic: Select this mode when no rear speakers are connected.
which
Manufactured under license from Dolby Laboratories Licensing Corporation.
Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
You need to connect the optional center speaker and rear speakers to use the Dolby Surround
functions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Dolby Surround
To use the Dolby Surround effects, you need to prepare the various settings.
These settings are set using the Remote Control.
The Dolby Surround settings are:
Center Speaker Mode
Center Speaker mode contains the following four settings.
PHANTOM: Select this setting if you have not connected a center speaker. The left and right front
speakers project the sound to give the effect of a center speaker. (PRO LOGIC only)
NORMAL:
Select this setting if you are using a small center speaker. Since the center speaker
cannot boost the low tones effectively, this setting uses the front speakers to boost the
low tones from the center speaker.
WIDE:
OFF:
Select this setting if you are using a center speaker that is similar in power to the front
speakers.
Select this setting to turn off the output for the center speaker.
Delay Time Mode
Delay Time mode contains the following four settings.
DELAY 1:
DELAY 2:
DELAY 3:
DELAY 4:
Select this setting if the rear speakers are further away from your listening position
than the front speakers. (Delay time: 15 msec.)
Select this setting if the rear speakers and front speakers are about the same distance
way from your listening position. (Delay time: 20 msec.)
Select this setting if the rear speakers are nearer to your listening position than the
front speakers. (Delay time: 25 msec.)
Select this setting if the rear speakers are very close to your listening position
compared to the front speakers. (Delay time: 30 msec.)
Adjusting the level of the Center Speaker
Adjust the level of the center speaker between +10 and –10. Set the level so that it is about the same as
the level from the front speakers.
Adjusting the level of the Rear Speakers (for PRO LOGIC only)
Adjust the level of the rear speakers between +10 and –10. Set the level so that it is about the same as the
level from the front speakers.
You cannot adjust the levels of the left and right rear speakers independently.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Use Dolby Pro Logic
Speaker Arrangements for Dolby Pro Logic————————
Layout when using the center speaker and
rear speakers
Layout when using the rear speakers
TV
TV
Front
Front
Front
Front
Speaker
Speaker
Speaker
Speaker
Center Speaker
Rear
Speaker
Rear
Speaker
Rear
Speaker
Rear
Speaker
Setting-up Dolby Pro Logic ————————————————
1. Press PRO LOGIC/3CH LOGIC to select PRO LOGIC.
Each time you press the button, Dolby Surround programs change as follows:
= PRO LOGIC = 3CH LOGIC = OFF = (back to the beginning)
or
When using the Remote Control, press SHIFT then press PRO LOGIC (1).
PRO LOGIC
SHIFT
•
Perform the steps below using the buttons on the Remote Control.
\
2. Select the desired Center Speaker mode.
Press SHIFT on the Remote Control then press CENTER MODE (6).
Each time you press the button, Center Speaker modes change as follows:
= NORMAL = WIDE = OFF = PHANTOM = (back to the beginning)
CENTER MODE
DELAY TIME
3. Select the Delay time.
Press DELAY TIME (9). Each time you press the button, Delay time changes as follows:
= DELAY 2 = DELAY 3 = DELAY 4 = DELAY 1 = (back to the beginning)
4. Set the volume to the level you like.
TEST TONE
5. Press TEST TONE (3).
A test tone comes out of the speakers in the following order:
= LEFT = CENTER = RIGHT = REAR = (back to the beginning)
•
•
When a test tone comes out of the rear speakers, “SURROUND” appears on the display.
When “PHANTOM” or “OFF” is selected for Center Speaker mode, no test tone comes out of the
center speaker.
CENTER
LEVEL
–
+
6. Adjust the level for the center speaker.
Press CENTER LEVEL + (5) or – (4). Set the level so that it is about
the same as the level from the front speakers.
•
You cannot adjust the level for the center speaker if “PHANTOM” or “OFF” is selected for
Center Speaker mode.
REAR
–
+
LEVEL
7. Adjust the level for the rear speakers.
Press REAR LEVEL + (8) or – (7). Set the level so that it is about
the same as the level from the front speakers.
8. Press TEST TONE (3) again.
Test Tone mode is canceled.
TEST TONE
This completes the preparations required for using Dolby Pro Logic.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Use Dolby 3 Channel
Logic
Speaker Arrangements for Dolby 3 Channel Logic ————
TV
Front
Front
Speaker
Speaker
Center Speaker
Setting-up Dolby 3ch Logic ————————————————
1. Press PRO LOGIC/3CH LOGIC to select 3CH LOGIC.
Each time you press the button, Dolby Surround programs change as follows:
= PRO LOGIC = 3CH LOGIC = OFF = (back to the beginning)
or
3CH LOGIC
When using the Remote Control, press SHIFT then press the 3CH LOGIC (2).
SHIFT
•
Perform the steps below using the buttons on the Remote Control.
\
2. Select the desired Center Speaker mode.
Press SHIFT on the Remote Control then press CENTER MODE (6). Each time you press the button,
Center Speaker modes change as follows:
CENTER MODE
= NORMAL = WIDE = OFF = (back to the beginning)
3. Set the volume to the level you like.
TEST TONE
4. Press TEST TONE (3).
A test tone comes out of the speakers in the following order:
•
When “OFF” is selected for Center Speaker mode, no test tone comes out of the center speaker.
= LEFT = CENTER = RIGHT = (back to the beginning)
5. Adjust the level for the center speaker.
Press CENTER LEVEL + (5) or – (4). Set the level so that it is about
the same as the level from the front speakers.
CENTER
LEVEL
–
+
•
You cannot adjust the level for the center speaker if “OFF” is selected for Center Speaker mode.
TEST TONE
6. Press TEST TONE (3) again.
Test Tone mode is canceled.
This completes the preparations required for using Dolby 3 Channel Logic.
•
You cannot adjust the Delay Time or rear speaker levels in Dolby 3 Channel Logic mode.
Using Dolby Surround
1. Press PRO LOGIC/3CH LOGIC and select the desired mode.
If you are using the Remote Control, press PRO LOGIC (1) or 3CH LOGIC (2) after pressing SHIFT.
Make sure that the center speaker and rear speakers have been set up correctly, as described on pages
14 to 16.
or
2. Playback as source with the
mark.
PRO LOGIC
3CH LOGIC
Enjoy the great sound achieved through Dolby Surround.
SHIFT
To Cancel Dolby Surround Effects
Press PRO LOGIC/3CH LOGIC until the Dolby Surround indicator goes out. If you are using the Remote
Control, press the Dolby Surround buttons (PRO LOGIC (1) or 3CH LOGIC (2)) after pressing SHIFT.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
PROGRAM
/RANDOM
DISC
REPEAT
DISC
DISC
SET
MULTI CONTROL
FM/AM
When TUNER is selected
as the source, the button
lights up.
FM AM
FM
AM
PRO LOGIC
3CH LOGIC
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
CENTER
–
–
+
+
LEVEL
SLEEP
Number keys
REAR
SOUND
MODE
LEVEL
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
FM MODE
/ ECHO
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
Display
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
MULTI CONTROL
–
Pressing FM or AM makes the
Remote Control ready for the
Tuner operations.
When the Unit is being operated
with the Remote Control, press
FM or AM first.
RM-SED702TXU REMOTE CONTROL
Band display, Frequency display, Preset channel
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from
preset memory storage.
Before listening to the radio:
•
Check that both the FM and AM antennas are firmly connected. (See page 4.)
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
Western Hemisphere countries use 10 kHz spacing.
+
To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down ¡ TUNING UP on the MULTI CONTROL. “AM --10” appears on the display.
To select the 9 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down TUNING DOWN 1 on the MULTI CONTROL. “AM -- 9” appears on the
display.
Tuning in a Station
Press FM/AM on the Unit (or FM or AM on the Remote Control) to turn
on the radio.
The frequency of the previously selected channel appears on the display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching between Frequency Bands———————————
On the Unit
Press FM/AM.
Each time you press the button, the band alternates between FM and AM.
COMPU PLAY
When FM/AM is pressed while the power is on standby, the power is automatically turned on.
On the Remote Control
To tune in FM stations, press FM.
To tune in AM stations, press AM.
AM
FM
or
COMPU PLAY
When FM or AM is pressed while the power is on standby, the power is automatically turned on.
Three Ways to Select a Station ——————————————
Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL repeatedly to move
from frequency to frequency until you find the one you want. (Manual Tuning).
OR
or
Press and hold TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL for a few
seconds, the frequency starts changing on the display. When a station is tuned in, the frequency stops
changing. (Auto Tuning).
OR
or
Possible only after presetting stations.
Press once and release 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to go to the next
preset station.
You can also use the Remote Control to tune in preset channels:
1. Press FM or AM so that you can receive the last station tuned in.
2. Select the station by entering the preset number in the number keys of the Remote Control.
PRO LOGIC
3CH LOGIC
TEST TONE
CENTER
–
–
+
+
LEVEL
CENTER MODE
DELAY TIME
•
Example: for channel 5, press 5. For channel 15, press +10 then 5.
REAR
LEVEL
For channel 20, press +10, then 10. For channel 30, press +10 twice then 10.
L
BALANCE
R
•
After you have selected the preset number and the number appears, the broadcast frequency of the
selected channel appears on the display.
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM stations for the preset numbers.
Note: In some cases, test frequencies have been already memorized for the tuner since the factory
examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations
you want into memory by following the presetting method.
1
2
1. Select a band by pressing FM/AM on the Unit.
When using the Remote Control, press FM or AM.
2. Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL
to tune into a station.
or
3. Press SET.
“SET” flashes for 5 seconds.
While it is still flashing, carry out the following procedure.
3 , 5
4. Press 4 P. DOWN or ¢ P. UP on the MULTI
CONTROL on the Unit to set the preset number.
5. Press SET again.
“STORED” appears for 2 seconds. The preset station is
stored in the memory.
6. Repeat steps 1 to 5 for each station you want to store in memory
using different preset numbers.
4
CAUTION: If the Unit is unplugged or if a power failure occurs, the preset
stations will be erased in a few days. If this happens, preset the station
again.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, press FM MODE/ECHO on the Remote Control so
that the MONO indicator lights up on the display. Reception improves, but there is no stereo effect.
FM MODE
/ ECHO
To restore the stereo effect, press FM MODE/ECHO on the Remote Control so that the MONO indicator
goes out. In this stereo mode, the STEREO indicator lights up and you can hear stereo effects, when a
program is broadcast in stereo.
Note: When the tuner is selected as the source, you can change the FM reception mode using FM MODE/
ECHO.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
PROGRAM/RANDOM
REPEAT
Disc Trays
0
FM
AM
PROGRAM
/RANDOM
PRO LOGIC
–
3CH LOGIC
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
DISC
DISC
CENTER
+
+
REPEAT
EDIT
LEVEL
SLEEP
Number keys
DISC buttons
REAR
SOUND
MODE
–
LEVEL
DISC
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
SET
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD Player
control buttons
MULTI
CONTROL
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
CD £/8
VOLUME
MULTI CONTROL
When CD is selected as
the source, the button
lights up.
–
RM-SED702TXU REMOTE CONTROL
Pressing CD CONTROL
or DISC (1 to 3) makes
the Remote Control ready
for the CD operations.
7 STOP
Display
Repeat indicator
Play mode indicator
Disc indicator
Flashes while a CD is playing.
Is lit when a CD has stopped or is paused.
CD indicator
Indicates the number of the disc selected.
Track number, Playing time, step number
CD indicator
Disc indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The System’s CD Player has an Automatic Changer with 3 disc trays. You can use Continuous, Random,
Program or Repeat Play for the discs in DISC 1, DISC 2 and DISC 3. Repeat Play can repeat all the tracks
on all the CD’s or one track on one CD. There is also the Tray Lock function, which safely keeps discs in
the trays.
Here are the basic things you need to know to play a CD and locate the different selections on it. Each
selection is called a track, so when we are talking about locating a track, we are also talking about how
you find a certain song or performance.
CD CONTROL
DISC 2
Entering CD Operation Mode with the Remote Control
Pressing CD CONTROL or DISC (1 to 3) makes the Remote Control ready for the CD operations.
Operate the CD player with 3, 7, MULTI CONTROL and number keys.
The explanation provided in this section assumes that the Remote Control has been put into CD operation
mode. When you use the Remote Control, press CD CONTROL first.
DISC 1
DISC 3
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading CDs
1. Press 0 on the CD Player you want to insert the disc onto.
“OPEN” appears on the display and the disc tray slides out.
COMPU PLAY
When 0 is pressed while the power is on standby, the power is automatically turned on.
2. Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions
when you play a CD, set the CD in
the right place at the center of the tray.
CD
Tray
CORRECT
INCORRECT
3. Press 0 to close the tray.
“CLOSE” appears on the display.
4. Repeat steps 1 to 3 to insert other discs onto the other trays.
•
To continue putting discs onto other trays, even if a tray is open, by pressing the 0 button of
another disc tray, the open tray will close automatically, and the new disc tray will slide out.
When you place a CD onto the currently selected tray, whose disc number shown on the CD indicator,
reading of the CD starts. The total number of tracks and total playing time appear after the reading is
completed, then the playing time of the first track appears.
\
\
Total number of tracks
and playing time
Reading now (flashing)
Playing time of the 1st
track
To put an 8 cm CD onto a tray, insert it so that it is aligned with the groove in the tray’s center.
If a tray is open when the System switches to the standby mode, the tray will close automatically.
Basics of Using the CD Player —
Continuous Play
Playing a CD ————————————————————————
Prepare the CDs.
On the Unit
Press CD £/8.
The source is set to CD and play starts from the first track of the currently selected CD whose disc
number shown on the CD indicator.
Press DISC (1 to 3) of the disc you want to play.
The source is set to CD and play starts from the first track of the selected CD.
COMPU PLAY
When CD £/8 or DISC (1 to 3) is pressed while the power is on standby, the power is automatically turned on.
When you press CD £/8 or DISC (1 to 3) while the disc tray is open, the tray will automatically
close before beginning to play.
If there is no CD in the disc tray, “NO DISC” appears on the display.
Playing order of discs
When playback starts from DISC 1, the playing order is DISC 1 = DISC 2 = DISC 3.
When DISC 3 has finished, the CD Player stops.
When playback starts from DISC 2, the playing order is DISC 2 = DISC 3 = DISC 1.
When DISC 1 has finished, the CD Player stops.
When playback starts from DISC 3, the playing order is DISC 3 = DISC 1 = DISC 2.
When DISC 2 has finished, the CD Player stops.
•
If any of the disc trays are empty, the CD Player skips that disc tray and continues through the
remaining disc trays in the order shown above. When the last disc has finished playing, the Unit
will stop automatically.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
On the Remote Control
Press CD CONTROL then press 3.
The source is set to CD and play starts from the first track of the currently selected CD whose disc
number shown on the CD indicator.
CD CONTROL
\
•
If the above operation is carried out while the power is on standby, the power is automatically
turned on.
Press DISC (1 to 3) of the disc you want to play.
The source is set to CD and play starts from the first track of the selected CD.
DISC 1
DISC 2
DISC 3
COMPU PLAY
When DISC (1 to 3) on the Remote Control is pressed while the power is on standby, the power is
automatically turned on.
To stop playing the disc, press 7 STOP (or 7 on the Remote Control). The display will show the total
number of tracks and total playing time of the disc that was playing followed by the playing time of the
first track.
or
To stop play and remove the disc, press 0 for the disc being played.
To pause, press CD £/8 (or 8 on the Remote Control). The playing time will flash.
To cancel pause, press CD £/8 (or 3 on the Remote Control) the Unit. Play continues from the point
where it was paused.
or
Selecting a Track —————————————————————
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select the
track.
The selected track starts playing.
or
Each time you press 4 P. DOWN or ¢ P. UP, the track changes by one.
Press and hold 4 P. DOWN or ¢ P. UP to continuously change tracks.
Locating a Track with the Remote Control Directly ———
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
DISC 1
DISC 2
DISC 3
1. Press the DISC (1 to 3) for the disc tray containing the track you
want to listen to.
•
Example: for the third disc, press DISC 3.
PRO LOGIC
3CH LOGIC
TEST TONE
2. Enter the number of the track you want to listen to with the
CENTER
–
–
+
+
LEVEL
CENTER MODE
DELAY TIME
number keys.
REAR
LEVEL
The selected track starts playing.
•
Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For
track 32, press +10 three times, then 2.
L
BALANCE
R
Fast Forward / Reverse ——————————————————
Use TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL.
For Fast Forward, press and hold down ¡ TUNING UP. For Reverse, press and hold down TUNING
DOWN 1. Release the button when the part you wish to listen to is reached.
or
Changing Discs While Playing ———————————————
You can replace a CD in a tray not being used, while another CD is playing.
1. Press 0 of the tray not being used.
The tray opens.
2. Replace the disc in the tray.
3. Press 0 to close the tray.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programing the Playing Order of the
Tracks
You can change the order in which the discs and tracks play, and select only the discs and tracks you want
from among those loaded in the CD Player.
You can program up to 32 steps in any desired order from among the discs in the CD player.
You can only program the CD Player when it is stopped.
On the Unit
PROGRAM
/RANDOM
1. Press PROGRAM/RANDOM.
“PROGRAM” appears on the display and
the PROGRAM indicator lights up.
If you have already created a program, the last step of the previous program will appear on the display.
Each time you press the button, play mode changes as follows:
= PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the
beginning)
2. Select a disc with DISC (1 to 3).
The display changes to the Program Entry display
and the disc number and track number flash
for a few seconds.
Track number
Step number
Disc number
While the indications are flashing, perform the operations in
steps 3 to 4. When the flashing indications change to
“PROGRAM”, repeat the operations in steps 2 to 4.
3. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select a
track for programing.
The disc number and track number starts flashing
on the display.
Flashing
4. Press SET.
The indications on the display stop flashing and remain lit.
The step number appears on the display.
5. Repeat steps 2 to 4 to select the other tracks for the program.
To select another track from the same disc, repeat the procedure from step 3.
6. Press CD £/8.
The Unit plays the tracks in the order you have programed them.
On the Remote Control
1. Press PROGRAM/RANDOM on the Unit.
“PROGRAM” appears on the display and
PROGRAM
/RANDOM
the PROGRAM indicator lights up.
If you have already created a program, the last step of the
previous program will appear on the display unless you have erased the program.
Each time you press the button, play mode changes as follows:
= PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the
beginning)
DISC 1
DISC 2
DISC 3
2. Select a disc with DISC (1 to 3).
Track number
The display changes to the Program Entry display
Step number
Disc number
and the disc number and track number flash
for a few seconds.
While the indications are flashing, perform the operation
in step 3. When the flashing indications change to
“PROGRAM”, repeat the operations in steps 2 to 3.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the number keys (1 to 10 and +10) to select the tracks.
The indications on the display stop flashing and remains lit.
PRO LOGIC
3CH LOGIC
+
TEST TONE
CENTER
–
–
The selected track numbers light up and the step number appears on the display.
LEVEL
CENTER MODE
DELAY TIME
•
Example: For track 5, press 5.
REAR
+
LEVEL
For track 15, press +10 then 5.
For track 20, press +10 then 10.
For track 32, press +10 three times, then 2.
L
BALANCE
R
4. Repeat steps 2 to 3 to select the other tracks for the program.
5. Press 3.
The Unit plays the tracks in the order you have programed them.
If you try to program a 33rd track, “FULL” will appear on the display to let you know that the
program is full.
If you try to program a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped
when the program is played.
You can skip to a particular program step by pressing the MULTI CONTROL (4 P. DOWN or ¢
P. UP) or 4 or ¢ on the Remote Control during program play.
To play the programed tracks repeatedly, press REPEAT. For details, refer to “Repeating a Track or
the Discs” on page 25.
To stop playing, press 7 STOP (or 7 on the Remote Control) once.
To delete all the tracks in a program, press 7 STOP (or 7 on the Remote Control) while the CD
Player is stopped. The program is deleted and “PROGRAM” appears on the display.
To cancel program play, press 7 STOP (or 7 on the Remote Control) while “PROGRAM” is shown
on the display.
Checking the Program ———————————————————
While the CD Player is stopped, use 4 or ¢ on the Remote Control to check the contents of the
program.
Each time you press ¢, the program contents are shown on the display in the programed order. Pressing
4 displays the previous step in the program.
Changing the Program ———————————————————
Modify the contents of a program while the CD Player is stopped.
Press CANCEL/DEMO on the Unit, the last step in the program is deleted.
Each time you press the button, the last step listed in the program is deleted from the program.
To add a step to the program, follow the procedure above (on either the Unit or the Remote Control).
The new steps are added to the end of the program.
Random Play
The tracks of all loaded CDs will play at random.
1. Press PROGRAM/RANDOM while the
CD Player is stopped to change to
the Random Mode display.
PROGRAM
/RANDOM
Each time you press the button, play mode changes as follows:
= PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the
beginning)
2. Press CD £/8.
The tracks of all the CDs are played in random order.
When all of the tracks have been played, the CD Player stops.
Note: Random Play cannot be activated with the DISC buttons and the number keys.
You can skip to the next track by pressing ¢ P. UP on the MULTI CONTROL (or ¢ on the Remote
Control) during Random Play. Each time you press the button, the next track is jumped to. (You cannot
skip to the previous tracks, nor to the beginning of the current track during Random Play.)
To continue with a different random track selection after the last track is played, press REPEAT to
select REPEAT ALL before or during Random Play.
To cancel Random Play, press 7 STOP (or 7 on the Remote Control) twice. When the RANDOM
indicator goes out, Continuous Play mode is resumed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating a Track or the Discs
You can have all the discs, the program or the individual track currently playing repeat as many times as
you like.
REPEAT
Press REPEAT on the Unit.
Each time you press the button, the Repeat Modes change as follows.
= REPEAT ALL = REPEAT 1 = No indicator = (back to the beginning)
REPEAT ALL: Repeats all the tracks on the CDs, or all the tracks in the program.
REPEAT 1: Repeats one track on one CD.
To exit Repeat Mode, press REPEAT until the Repeat Mode indicator on the display goes out.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation.
When the Tray Lock function is on, the trays cannot be opened even if the 0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Trays —————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing 7 STOP, press 0 for DISC 1 on the Unit.
“LOCKED” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing 0 displays the message “LOCKED” on the display
and the trays do not open. Also, 0 cannot be used to automatically turn on the power.
Unlocking the Trays ————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing 7 STOP, press 0 for DISC 1 on the Unit.
When the unlock operation is done, “UNLOCKED” appears on the display to show that the lock has
been taken off.
The trays can now be opened by pressing 0.
The 0 can also be used to automatically turn on the power.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck
(Playing)
PROGRAM
/RANDOM
DISC
REPEAT
DISC
EDIT
DISC
FM
AM
PRO LOGIC
3CH LOGIC
+
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
CENTER
–
–
LEVEL
SLEEP
REAR
SOUND
MODE
+
LEVEL
MULTI CONTROL
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
TAPE ™ £
When TAPE is selected
as the source, the button
lights up.
Cassette Deck
control buttons
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
MULTI CONTROL
–
7 STOP
Pressing TAPE CONTROL
makes the Remote Control
ready for the Cassette Deck
operations.
RM-SED702TXU REMOTE CONTROL
REVERSE MODE
DECK A/B
0 Eject (Deck B)
0 Eject (Deck A)
Display
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the
selected tape deck will use for playback.
During playback, the direction indicator flashes slowly.
During fast left or fast right, the indicator flashes quickly.
During Music Scan mode, the indicator flashes slowly and
quickly alternately.
: Reverse Mode indicator
: Tape Direction indicator
: DECK A, B indicator
When the System is being used, the display shows other items
as well. However, we have only shown the items described in
this section.
The Cassette Deck allows you to play, record and dub audio tapes.
With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
Entering the TAPE Operation Mode with the Remote Control
Pressing TAPE CONTROL makes the Remote Control ready for the Cassette Deck operations.
Operate the Cassette Deck with 3, 7 and MULTI CONTROL.
The explanation provided in “Using the Cassette Deck” section assumes that the Remote Control has been
put into Cassette Deck operation mode. When you use the Remote Control, press TAPE CONTROL first.
TAPE CONTROL
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Regular Play
When the power is already on, you can use this basic procedure:
1. Press down 0 for the deck you want to use.
2. When the cassette holder opens, put a cassette in, with the
exposed part of the tape down, toward the base of the Unit.
•
If the cassette holder does not open, turn the power off, then back on and press down 0 again.
3. Close the holder gently.
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.
To change the selected deck, press DECK A/B. When using the Remote Control, press TAPE A or
TAPE B.
4. Press TAPE ™ £ on the Unit.
COMPU PLAY
When the TAPE ™ £ is pressed while the power is on standby, the power is automatically turned on.
When using the Remote Control, first press TAPE CONTROL followed by 3.
If the power is on standby, the power will automatically be turned on.
When “TAPE” appears on the display, the tape play starts toward the direction currently selected.
To stop playing, press 7 STOP on the Unit (or 7 on the Remote Control).
To remove the tape, stop the tape, and press down 0.
To change deck while playing a tape, press TAPE ™ £ after pressing DECK A/B on the Unit or
press 3 after pressing TAPE A or TAPE B on the Remote Control.
To change the direction of a tape while it is playing, press TAPE ™ £ on the unit or
DIRECTION on the Remote Control.
Fast Left and Fast Right ——————————————————
While the tape is stopped, press TUNING DOWN 1 on the MULTI CONTROL (or 1 on the
Remote Control) and the tape will wind rapidly to the left side of the cassette without playing.
While the tape is stopped, press ¡ TUNING UP on the MULTI CONTROL (or ¡ on the Remote
Control) and the tape will wind rapidly to the right side of the cassette without playing.
Note: Deck A and Deck B cannot be used for playback at the same time.
Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for
blank portions that usually separate selections, then plays the next selection.
Finding the Beginning of the Current Selection —————
Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL
(or 1 or ¡ on the Remote Control) during play.
Make sure that you press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL (or
1 or ¡ on the Remote Control) in the opposite direction to that in which the tape is playing.
Searching stops at the beginning of the current selection, and the current selection starts
automatically.
or
Finding the Beginning of the Next Selection ———————
Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL
(or 1 or ¡ on the Remote Control) during play.
Make sure that you press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL (or
1 or ¡ on the Remote Control) in the same direction as that in which the tape is playing.
Searching stops at the beginning of the next selection, and the next selection starts automatically.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Scan works by detecting a 4-second long blank at the beginning
of each selection, so it will not work well if your tape has • • •
•
•
•
No blank at the beginning of a selection.
Noise (often caused by much use or poor quality dubbing) which fills the blank with noise.
Long, very soft passages or pauses in a selection. The scan will detect these as 4-second long
blanks. If this happens, just scan again until you reach the selection you want.
Reverse Mode
Use Reverse Mode to make the tape automatically reverse at the end of a side and start playing the
other side.
Each time you press REVERSE MODE, the Reverse Mode turns on and off alternately.
Reverse Mode ON
Reverse Mode OFF
Continuous Play: With the Reverse Mode indicator on, when tape playback in the reverse (2)
direction finishes, the Unit always checks to see if a tape is in the other deck. If there is, it automati-
cally starts playing. This Continuous Play function works regardless of which deck starts first.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck
(Recording)
PROGRAM
/RANDOM
DISC
REPEAT
DISC
EDIT
DISC
EDIT
FM
AM
PRO LOGIC
3CH LOGIC
TEST TONE
CENTER MODE
DELAY TIME
SHIFT
CENTER
–
–
+
+
LEVEL
SLEEP
REAR
SOUND
MODE
LEVEL
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
REC PAUSE
+
VOLUME
–
CD REC START
RM-SED702TXU REMOTE CONTROL
REC START/STOP
DUBBING
Display
REC indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Things to Know before You Start Recording ———————
It may be unlawful to record or play back copyrighted material without the consent of
the copyright owner.
When you want to record onto both sides of a tape, you can set Reverse mode on to do so. However,
recording automatically stops after recording in the 2 direction in Reverse mode. Therefore, make
sure that the tape direction is 3 when recording with Reverse mode on.
The recording level, which is the volume at which the new tape is being made, is automatically set
correctly, so it is not affected by volume control. Thus, during recording you can adjust the sound you
are actually listening to without affecting the recording level.
Two small tabs on the back of the cassette tape, one for side A and one for side B, can be removed to
prevent accidental erasure or re-recording. To record on a cassette with the tabs removed, you must
cover the holes with adhesive tape first.
However, when a Type II tape is used, only cover part of the hole as shown, since the other part of the
hole is used to detect the tape type.
When recording, you can hear Sound Mode effects through the speakers or headphones. However, the
sound is recorded without Sound Mode effects.
Type I and Type II tapes can be used for recording.
Note: At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Depend-
ing on the recording source, the first part of the recording may be missing because of the leader. When
recording CDs or radio broadcasts, to get the beginning of the recording on the tape, first wind on the
leader before beginning recording.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: If recordings you have made have excessive noise or static,
the Unit may be too close to a TV which was on during recording. Either
turn off the TV or increase the distance between the TV and the System.
Standard Recording
This is the basic method for recording any source. The System also has special ways for recording CD to
tape, and tape to tape, which save your time and effort, as well as give you some special effects. However,
when you need to add a selection to a tape you have made, or are combining selections from several
sources on one tape, use the method described below; just substitute the source you want into this
procedure, such as a CD or the Tuner. You can also record from an auxiliary source with this procedure.
Using the Unit
1. Insert a blank or erasable tape into Deck B.
2. Press REVERSE MODE if you want to record on both sides of the
tape.
Reverse Mode comes on.
•
When using Reverse Mode, insert the tape so that it will be recorded in the forward (3) direction.
3. Check the recording direction for the tape.
Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the
directions are different, press 7 STOP after pressing TAPE ™ £ to set the tape direction.
•
When using the Reverse Mode to record both sides of a tape, check that the Tape Direction
indicator is in the forward (3) direction. If the direction indicator is not in the forward (3)
direction, press TAPE ™ £ then press 7 STOP.
4. Prepare the source, for example, by tuning in a radio station,
loading CDs, or turning on connected equipment.
5. Press REC START/STOP.
The REC indicator lights up and the System begins recording.
Using the Remote Control
1. Insert a blank or erasable tape into Deck B.
2. Press REVERSE MODE on the Unit if you want to record on both
sides of the tape.
Reverse Mode comes on.
•
When using Reverse Mode, insert the tape so that it will be recorded in the forward (3) direction.
3. Prepare the source, for example, by tuning in a radio station,
loading CDs, or turning on connected equipment.
4. Press REC PAUSE.
REC PAUSE
The REC indicator starts flashing.
5. Press TAPE CONTROL then press 3.
Recording starts.
TAPE CONTROL
\
The REC indicator stops flashing and remains lit.
Notes for using Reverse Mode for recording
When recording with Reverse Mode on, the System automatically stops when it reaches the end of the
reverse (2) direction. To record on both sides of a tape, make sure that the recording direction for the tape
inserted into Deck B is forward (3), and that the Tape Direction indicator is also forward (3), before you
start recording.
To pause at any time during the recording process
Press REC PAUSE on the Remote Control. Then press 3 on the Remote Control or REC START/STOP
on the Unit to restart recording.
To stop at any time during the recording process
Press REC START/STOP on the Unit again, or press 7 on the Remote Control.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording AM Station to Tape———————————————
When recording an AM broadcast, beats may be produced which are not heard when listening to the
broadcast. In this case, press PROGRAM/RANDOM on the CD Player to eliminate the beats.
PROGRAM
/RANDOM
1. Set to AM station and start recording.
2. Press PROGRAM/RANDOM repeatedly until the beats are eliminated.
Each time you press the button, the indication on the display changes as follows:
= CUT 2 = CUT 3 = CUT 1 = (back to the beginning)
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have
set in a program.
1. Press CD £/8, then 7 STOP.
2. Prepare CDs. (See page 21.)
Check that the CD Player is not playing a CD.
3. Insert a blank or erasable cassette in Deck B.
•
When you want to record on both sides of a tape, press REVERSE MODE to turn on Reverse
Mode. Check that the recording direction for the tape and the Tape Direction indicator are correct.
(See page 30 “Notes for using Reverse Mode for recording”.)
4. Press CD REC START.
“CD REC” appears on the display, the REC indicator lights up, and the System begins recording.
If the tape reaches its end while recording a song, the last song will be re-recorded at the beginning of
the other side.
When the recording is finished, “CD REC FINISHED” scrolls by on the display. The CD Player and
Cassette Deck stop.
To stop at any time during the recording process, press 7 STOP.
Note: When making Sleep Timer settings while doing CD Direct recording, set the time so that there is
enough leeway to finish the recording before the power turns off. If the time is set to about the length of
the CD, the power may turn off before recording finishes.
For CD Direct Recording using more than one disc, use a blank tape, If you use a prerecorded tape,
prerecorded material may not be erased between newly-recorded tracks.
Auto Edit Recording
Using Auto Edit, you can record the CD tracks to fit the tape, so a selection is not cut off. Auto Edit is one
of the best ways to copy all of a CD onto a tape. Auto Edit programs the CD tracks in numerical order. To
prevent the end of the last track on the front side from being cut off, the last track on the front side is
selected to fit on the remaining tape length.
1. Press CD £/8, then 7 STOP.
EDIT
2. Prepare CDs. (See page 21.)
Check that the CD Player is not playing a CD.
3. Press EDIT on the Unit.
“DISC-” appears on the display.
4. Press DISC (1 to 3) for the disc you want to record.
After “TAPE C - -”, the optimum tape length for the disc appears on the display.
\
•
You can select a different length of tape, depending on the actual size of the tape you are using,
from eleven possibilities programed into the Unit: 40, 46, 50, 54, 60, 64, 70, 74, 80, 84, 90. Select
the tape length that corresponds to the length of tape you are using, or the nearest length to it, by
adjusting 4 P. DOWN or ¢ P. UP on the MULTI CONTROL.
•
If you select a tape length shorter than the total playing time of the CD, the last tracks on both
sides of the tape will be faded out as the tape ends.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press SET.
The tracks to be recorded on side B appear on the display.
•
Each time you press the button, the tracks to be recorded on side A and side B appear on the
display alternately.
6. Insert a blank or erasable cassette in Deck B.
When you want to record on both sides of a tape, press REVERSE MODE to turn Reverse mode on.
7. Press CD REC START .
The Unit plays the CD and starts recording. If the tape has not been rewound, the Unit rewinds the
tape before starting to record the CD.
To stop at any time while recording, press 7 STOP or REC START/STOP on the Unit. If 7 STOP is
pressed, the Cassette Deck will create a four-second blank space after the CD Player stops. If REC
START/STOP is pressed, the CD Player and Cassette Deck will stop simultaneously. When 7 is pressed
on the Remote Control, the stop time of the CD Player and Cassette Deck vary according to their mode
(CD operation mode or Cassette Deck operation mode). If the Remote Control is in CD operation mode,
the Cassette Deck will stop four second after the CD Player stops. If the Remote Control is in Cassette
Deck operation mode, the CD Player and Cassette Deck will stop simultaneously.
To cancel Auto Edit, press PROGRAM/ RANDOM while the CD Player is stopped or press 0 for the
disc number being recorded.
Note: When making Sleep timer settings while doing Auto Edit recording, set the time so that there is
enough leeway to finish the recording before the power goes out. If the time is set to about the length of
the CD, the power may go out before recording finishes.
Tape to Tape Recording (Dubbing)
Recording from one tape to another is called dubbing.
When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.
When you record both sides of a tape, press REVERSE MODE to turn on the Reverse Mode.
It is preferable that the type of tape (Type I or Type II) you record from be the same as the type you
record onto.
How to Use DUBBING ———————————————————
1. Press TAPE ™ £ , then 7 STOP.
2. Insert the source cassette you want to copy from into Deck A for
playback.
Insert the cassette so that it will be played in the forward (3) direction.
3. Insert the blank or erasable cassette you want to copy onto into
Deck B for recording.
Insert the cassette so that it will be recorded in the forward (3) direction.
4. Press DUBBING.
DUBBING
Deck A and Deck B start simultaneously.
To stop dubbing, press 7 STOP.
When dubbing, you can hear Sound Mode effects through the speakers or headphones. However, the
sound is dubbed without Sound Mode effects.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timer
PROGRAM
/RANDOM
SET
DISC
FM
AM
EPEAT
EDIT
DISC
DISC
MULTI CONTROL
PRO LOGIC
–
3CH LOGIC
TEST TONE
SHIFT
CENTER
+
+
LEVEL
CENTER MODE SLEEP
SLEEP
REAR
SOUND
MODE
–
LEVEL
DELAY TIME
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
TIMER/CLOCK
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
–
RM-SED702TXU REMOTE CONTROL
Display
Clock, timer-on time etc.
Timer indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The timers let you control recording and listening functions automatically.
Three types of timers are available:
Daily Timer — Use this timer to set wake up everyday to music from any source, instead of an
alarm clock.
Recording Timer — Unattended recording of radio broadcasts. You can set the starting time and
stopping time of the recording.
Sleep Timer — Fall asleep and have your Unit turn off automatically after a certain length of time.
Note: When operating the Daily Timer and Recording Timer, always set the clock first. If the clock is not
set, the Daily Timer and Recording Timer functions cannot be used. For details, refer to “Setting the
Clock” on page 8.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Daily Timer
With this timer you can wake up to music from a CD, tape, your favorite radio program.
You can set the Daily Timer whether the Unit is on or off.
Procedure For Setting the Daily Timer
1. Press TIMER/CLOCK so that “DAILY” appears on the display.
The DAILY indicator flashes on the display.
•
Each time you press the button, the timer setting indication changes as follows:
DAILY = ON TIME (flashes) = REC = ON TIME (flashes) = Clock setting = Canceled
(current source) = (back to the beginning)
Note: If the clock has not been set, even if TIMER/CLOCK is pressed you cannot select the Daily
Timer.
2. Press TIMER/CLOCK again.
After “ON TIME” flashes for 2 seconds, it switches to the on-time setting display.
\
Flashing
3. Set the time you want the Unit to turn on.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET .
Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\
•
After adjusting the minutes and pressing SET, “OFF TIME” flashes for two seconds and on-time
setting is completed.
4. Set the time you want the Unit to turn off.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET.
Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\
•
•
When the off-time has been set, the indication on the display changes to the source selection.
To select the source to be played, press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL
until your choice is shown.
5. Select the source you want to listen to.
To use a CD as the source:
1. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until
“- CD - - -” flashes on the display and press SET.
2. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the
CD disc number to be played and press SET .
If you press SET without selecting a disc, the last disc played by the Unit will be used.
3. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the
CD track number to be played and press SET.
If you press SET without selecting a track, playback will start from the first track on the CD.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the Tuner as the source
(Possible only after presetting stations.):
1. To listen to FM, press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly
until “TUNER FM” flashes and press SET.
To listen to AM, press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly
until “TUNER AM” flashes and press SET.
or
2. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the
station to be listened to as a preset channel and press SET.
To use a Cassette Deck as the source:
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until “TAPE”
flashes on the display and press SET.
6. Setting the Volume Level.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the volume.
VOL - 10: Sets the volume level to 10.
VOL - 15: Sets the volume level to 15.
VOL - 20: Sets the volume level to 20.
VOL - - -: Sets the volume to the last volume setting used.
7. Press SET.
The DAILY indicator stops flashing and remains lit. The on-time, off-time, playback source (includ-
ing the disc number and track number if a CD source is selected), and volume level appears on the
display
Turn the power off if you made the timer settings with the power turned on.
A few seconds before the on-time, the Unit automatically turns on the power. When the on-time
comes, playback starts using the selected source. A few seconds before the off-time, “OFF” flashes on
the display. When the off-time comes, the power is automatically turned off.
If a button is pressed when the Daily Timer is operating, playback continues but the timer is canceled.
Before turning off the Unit
If the source is a CD, make sure that there is a CD in the selected disc number.
If the source is a tape:
•
The tape in the deck corresponding to the Deck indicator mark is played. Make sure that there is a
tape in the selected Cassette Deck.
•
•
Check that the tape direction is correct. This is important especially when Reverse Mode is off.
Set Reverse Mode on if you want to play both sides of the tape.
Select the Sound Mode if you want to listen using a Sound Mode effect.
To change the Daily Timer setting
To change the settings for the Daily Timer, repeat the setting procedure from the beginning.
Turning the Daily Timer On and Off ————————————
Once the Daily Timer has been set it will be activated at the same time every day until the setting is
turned off.
To turn the Daily Timer off, press TIMER/CLOCK until “DAILY” appears on the display. Press
CANCEL/DEMO. “OFF” appears on the display and the DAILY indicator goes out.
To turn the Daily Timer on again, press TIMER/CLOCK until “DAILY” appears on the display, then
press SET. The Timer on-time, off-time, playback source (including the disc number and track number if
a CD source is selected), and volume level appear on the display, and the DAILY indicator lights up.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: If the Unit is unplugged, or a power failure occurs, the timer
setting will be erased in a few days. If the settings are erased in this
way, reset the timer settings.
Setting the Recording Timer
With the Recording Timer you can make a tape of a radio broadcast automatically whether or not you are
home. For the timer to work correctly, you need to make sure of the following in addition to setting the
time for the Tuner and Cassette Deck to come on:
You can set the Recording Timer whether the Unit is on or off.
The tape you want to record onto must be in Deck B.
Procedure for Setting the Recording Timer
1. Press TIMER/CLOCK repeatedly until “REC” appears on the display.
The REC indicator flashes on the display.
•
Each time you press the button, the timer setting indication changes as follows:
DAILY = ON TIME (flashes) = REC = ON TIME (flashes) = Clock setting = Canceled
(current source) = (back to the beginning)
Note: If the clock has not been set, even if TIMER/CLOCK is pressed you cannot select the Recording
Timer.
2. Press TIMER/CLOCK again.
After “ON TIME” flashes for 2 seconds, it switches to the time setting display.
3. Set the time you want the Unit to be turned on.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET. Then
press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET .
4. Set the time you want the Unit to be turned off.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET. Then
press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
5. Select the Recording band.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select “TUNER FM” or “TUNER
AM” and press SET.
6. Select the preset channel for the station to be recorded.
Press MULTI CONTROL 4 P. DOWN or ¢ P. UP to select.
7. Press SET.
The REC indicator stops flashing and remains lit. The on-time, off-time, and Recording band
(“TUNER FM” or “TUNER AM”) appear on the display.
Turn the power off if you made the timer settings with the power turned on.
A few seconds before the on-time for the recording, the Unit automatically turns on the power. When
the on-time comes, recording starts using the selected source. A few seconds before the off-time,
“OFF” flashes on the display. When the off-time comes, the power is automatically turned off.
Before the timer starts
Check that tape direction is correct. This is important especially when Reverse Mode is off.
Set Reverse Mode on if you want to record on both sides of the tape.
The volume level is automatically set to 0 when Recording Timer starts.
It is very easy, and can be very disappointing, to forget to put in a
tape, or to accidentally leave a tape in Deck B you don’t want
recorded over. Although this happens to almost everyone at one time
or another, we hope it won’t happen to you!
To change the Recording Timer setting
Repeat the setting procedure from the beginning.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Recording Timer On and Off —————————
Once the Recording Timer has been used, the setting is maintained but the Timer is set to off.
To turn the Recording Timer off before the timer starts, press TIMER/CLOCK repeatedly until
“REC” appears on the display, then press CANCEL/DEMO. “OFF” appears on the display and the REC
indicator goes out.
To record at the same time again, press TIMER/CLOCK repeatedly until “REC” appears on the
display, then press SET. The on-time, off-time, and Recording band (“TUNER FM” or “TUNER AM”)
appear on the display, and the REC indicator lights up.
CAUTION: If the Unit is unplugged, or a power failure occurs, the timer
setting will be erased in a few days. If the settings are erased in this
way, reset the timer settings.
Setting the Sleep Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting
this timer, you can fall asleep to music and know your Unit will turn off by itself rather than play all
night.
You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the SLEEP Timer, follow this procedure:
SLEEP
1. With the Unit on and a source playing, press SLEEP on the Remote
Control.
“SLEEP” appears on the display.
2. Set the length of time you want the source to play before shutting
off.
•
Each time you press this button while the SLEEP indicator is flashing, it changes the number of
minutes shown on the display in this sequence:
= 10 = 20 = 30 = 60 = 90 = 120 = Canceled = (back to the beginning)
When the number of minutes you want shows on the display, just wait 5 seconds until the indicator stops
flashing, and is remains lit.
The Unit is now set to turn off after the number of minutes you set.
To change the Sleep Timer setting
Press SLEEP until the number of minutes you want appears on the display.
To cancel the Sleep Timer setting
Press SLEEP until the SLEEP indicator goes out on the display.
Turning off the Unit also cancels the Sleep Timer.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Priority
Since each timer can be set independently, you may wonder what happens if the settings overlap. Here are
the priorities for each timer:
The Recording Timer always has priority. This means that:
•
•
If another timer is set to come on during a time when the Recording Timer is operating, the other
timer just will not come on at all, so you will always get the entire program on tape.
If the Recording Timer is set to come on while another timer is operating, the other timer will shut
off 10 seconds before the Recording Timer is set to turn on, and the Recording Timer will then take
over.
If the Sleep Timer is set while the Daily Timer is operating, the Sleep Timer will take over.
However, if the Daily Timer is set to come while the Sleep Timer is operating, the Daily Timer will
take over.
Example 1
Setting
Operation
ON
OFF
ON
OFF
Recording Timer
SLEEP Timer
OFF
22:00
22:30
22:00
22:30
23:00
The Recording Timer has priority.
Example 2
Setting
Operation
ON
OFF
ON
OFF
Recording Timer
DAILY Timer
ON
OFF
21:30 22:00
22:30
23:00
21:30
22:30
The Recording Timer has priority.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Microphone
PROGRAM
/RANDOM
DISC
REPEAT
DISC
EDIT
DISC
SOUND MODE
VOLUME
MIC 1
MIC 2
MIC LEVEL
FM
AM
PRO LOGIC
–
3CH LOGIC
TEST TONE
SHIFT
CENTER
+
+
LEVEL
CENTER MODE SLEEP
REAR
SOUND
MODE
–
LEVEL
DELAY TIME
SOUND
MODE
FM MODE
/ ECHO
L
BALANCE
R
S.A.BASS
Display
FM MODE
/ ECHO
TAPE A
DISC 1
TAPE B
DISC 2
DIRECTION REPEAT
DISC 3
CD CONTROL
AUX
TAPE CONTROL
REC PAUSE
+
VOLUME
VOLUME
–, +
–
RM-SED702TXU REMOTE CONTROL
Karaoke indicator
Echo indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The System includes two microphone terminals, MIC 1 and MIC 2. By attaching a microphone to one or
both of these terminals, you can use the System for Karaoke or microphone mixing. You can also add an
echo to the microphone’s sound.
MIC LEVEL adjusts the volume for both MIC 1 and MIC 2 at the same time.
When you will not be using the microphone, keep MIC LEVEL set to MIN, and disconnect the
microphone.
CAUTION: Always set MIC LEVEL to MIN when connecting or
disconnecting the microphone.
Karaoke (Sing Along)
The Vocal Masking function lets you use regular tapes, CDs, or records as sources for Karaoke.
When you select Karaoke mode, the lead vocal volume of the source is reduced, and you can replace it by
singing into the microphones as the music plays.
Singing Along with Karaoke ————————————————
1. Turn MIC LEVEL to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC
jack on the front panel.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press SOUND MODE repeatedly until “KARAOKE” appears on the
display.
SOUND
MODE
The
(Karaoke) indicator lights up.
or
4. Start the source CD, tape or other equipment.
5. Adjust the volume control and MIC LEVEL, as you sing into the
microphone.
Important Information on Karaoke
Because a radio signal is not as reliable as signals coming from a tape or CD, you may not always get
satisfactory results using the radio as a source for Karaoke.
Some tapes and CDs are better sources for Karaoke than others.
•
•
Mono sources are not suitable for Karaoke.
The lead vocals may not be completely reduced for sources with duets, strong echo, a chorus, or
only a few instruments.
•
Poorly dubbed tapes may not be suitable for Karaoke.
Digital Echo ————————————————————————
You can get an echo effect to apply to your voice.
Press FM MODE/ECHO on the Remote Control.
The
(Echo) indicator lights up.
No echo is applied.
An echo is applied.
➧
To prevent howling and squealing (feedback) when using the microphone, adjust MIC LEVEL and
VOLUME. Also, try to avoid pointing the microphone towards the speakers.
When two microphones are connected, turn the microphone ON/OFF switch for the microphone that
is not being used to OFF.
When recording sound from the microphone, the digital echo effect is also recorded.
Note: When the tuner is selected as the source, you cannot turn on and off the digital echo using FM
MODE/ECHO. You can change the FM reception mode using this button when the tuner is selected as the
source. (See p.19.)
Recording Your Singing ——————————————————
1. Follow the steps in “Karaoke (Sing Along)” above.
2. Follow the steps in “Standard Recording” (See page 30) to record
your singing.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Microphone Mixing
When using special Karaoke sources for karaoke, use the following procedure.
1. Turn MIC LEVEL to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC
jack on the front panel.
3. Start the source CD, tape, or other equipment.
4. Adjust the volume and MIC LEVEL, as you sing into the
microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (See page 40.)
Recording Microphone Mixing———————————————
1. Follow the steps in “Microphone Mixing” above.
2. To record, follow the steps in “Standard Recording”. (See page 30.)
Playing the Microphone Sound through
the Speakers
1. Turn MIC LEVEL to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC
jack on the front panel.
3. Adjust the volume and MIC LEVEL as you sing into the microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (See page 40.)
Recording from the Microphone——————————————
1. Follow the steps in “Playing the Microphone Sound through the
Speakers” above.
2. To record, follow the steps in “Standard Recording”. (See page 30.)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Compact Discs
Cassette Tapes
Handle your compact discs, cassette tapes, and
Cassette Deck carefully, and they will last a
long time.
•
If the tape is loose in its cassette, take
up the slack by inserting a pencil in
one of the reels and rotating.
•
•
Remove the CD from the case by holding
it at the edges while pressing the center
hole lightly.
Do not touch the shiny surface of the CD,
or bend the CD.
•
•
If the tape is loose, it may get
stretched, cut, or caught in the cassette.
Do not touch the tape surface.
•
•
•
Put the CD back in its case after use to
prevent warping.
Be careful not to scratch the surface of the
CD when placing it back in the case.
Avoid exposure to direct sunlight,
temperature extremes, and moisture.
•
Do not store the tape:
-
In dusty places
-
-
-
-
In direct sunlight or heat
In moist areas
On a TV or speaker
Near a magnet
•
A dirty CD may not play correctly. If a CD
does become dirty, wipe it with a soft cloth
in a straight line from center to edge.
Cassette Deck
CAUTION: Do not use any solvent
•
If the heads, capstans, and pinch-rollers of the Cassette Deck
become dirty, the following will occur:
(for example, conventional record cleaner,
spray thinner, benzine, etc.) to clean a CD.
-
-
-
-
-
Loss of sound quality
Discontinuous sound
Fading
Incomplete erasure
Difficulty recording
Moisture Condensation
Moisture may condense on the lens inside
the Unit in the following cases:
•
•
•
After starting the heating in the room.
In a damp room.
If the Unit is brought directly from a
cold to a warm place.
•
Clean the heads, capstans, and pinch-rollers using a cotton
swab moistened with alcohol.
Pinch-rollers
Capstans
Should this occur, the Unit may malfunc-
tion. In this case, leave the Unit turned on
for a few hours until the moisture evapo-
rates, unplug the AC power cord, and then
plug it in again.
General Notes
In general, you will have the best performance by keeping your
tapes, CDs, and the mechanism clean.
Heads
•
Store tapes and CDs in their cases, and keep them in cabinets
or on shelves.
•
•
If the heads become magnetized, the Unit will produce noise
or lose high frequencies.
•
Keep the Cassette Deck’s tape doors and the CD trays closed
when not in use.
To demagnetize the heads, turn off the Unit, and use a head
demagnetizer (available at electronics and record shops).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
•
•
If you are having a problem with your System, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your
dealer, for service.
Symptom
Possible Cause
Action
No sound is heard.
Unable to record.
Poor radio reception
Connections are incorrect, or loose.
Check all connections and make
corrections. (See pages 4 - 6.)
Cassette record protect tabs are removed.
Cover holes on back edge of cassette with
tape.
•
•
The antenna is disconnected.
The AM Loop Antenna is too close to
the Unit.
•
•
Reconnect the antenna securely.
Change the position and direction of the
AM Loop Antenna.
•
The FM Wire Antenna is not properly
extended and positioned.
•
Extend FM Wire Antenna to the best
reception position.
The CD skips.
The CD is dirty or scratched.
Clean or replace the CD.
Unable to operate the Remote Control.
•
The path between the Remote Control
and the sensor on the Unit is blocked.
The batteries have lost their charge.
•
Remove the obstruction.
•
•
Replace the batteries.
The CD tray cannot be opened.
The CD does not play.
The main AC power cord is not plugged in.
The CD is upside down.
Plug in the AC power plug.
Put the CD in with the label side up.
Unplug the Unit then plug it back in.
Operations are disabled.
The built-in microprocessor has malfunc-
tioned due to external electrical interference.
The cassette door cannot be opened.
During tape playing, the power cord was
unplugged.
Plug in the power cord, press
press 0 .
, and then
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Amplifier Section
Output Power (IEC 268-3/DIN)
Front 45 watts per channel, min. RMS, both channels driven, into 6 ohms at 1 kHz,
with no more than 0.9% total harmonic distortion.
Center 25 watts min. RMS, both channels driven, into 8 ohms at 1 kHz, with no
more than 0.9% total harmonic distortion.
Rear 12.5 watts per channel, min. RMS, both channels driven, into 16 ohms at
1 kHz, with no more than 0.9% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX 300 mV/50 kohms
MIC 1 1.5 mV/4.7 kohms
MIC 2 1.5 mV/4.7 kohms
Speaker terminals 6 - 16 ohms
Cassette Deck Section
Frequency Response
Type II (CrO2) : 50 - 14,000 Hz
Type I (NORMAL) : 50 - 14,000 Hz
Wow And Flutter 0.15% (WRMS)
CD Automatic Changer Section
CD Capacity 3 discs
Dynamic Range 85 dB
Signal-To-Noise Ratio 90 dB
Wow And Flutter Unmeasurable
Tuner Section
FM Tuner
Tuning Range 87.5 - 108.0 MHz
AM Tuner
Tuning Range 531 - 1,602 kHz (at 9 kHz channel space)
530 - 1,710 kHz (at 10 kHz channel space)
Dimensions 265 × 315 × 340 mm (W/H/D)
(10-7/16 × 12-7/16 × 13-7/16 inches)
Mass 9.0 kg (19.8 lbs)
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
AC Plug Adaptor (except for Argentina) (1)
Power Specifications
Power Requirements AC 110/127/220/230-240 V , 50/60 Hz adjustable
with the voltage selector
Power Consumption 160 watts
12 watts (in standby mode)
Max. Power Comsumption 340 watts (Taiwan only)
Design and specifications are subject to change without notice.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.)
Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU.,
Canadá, ni el Grã-Bretanha)
Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os
E.U.A., o Canadá, e o Reino Unido)
LINE VOLTS
220V
110V
230
-240V
127V
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your mains
(AC) line voltage corresponds with the position of the
voltage selector switch provided on the outside of this
equipment and, if different, reset the voltage selector
switch, to prevent from a damage or risk of fire/electric
shock.
IMPORTANTE para la línea de la red (CA)
ANTES DE ENCHUFAR EL EQUIPO, compruebe si la
tensión de la línea de la red (CA) corresponde con la
posicióndelselectordetensiónsituadoenlaparteexterior
del equipo, y si es diferente, reajuste el selector de tensión
para evitar el riesgo de incendios/descargas eléctricas.
IMPORTANTE para a ligação à tensão da rede (CA)
ANTES DE LIGAR O APARELHO A UMA TOMADA
DA REDE, verifique se a tensão da rede CA corresponde
à posição do seletor de voltagem localizado na parte
externadesteequipamento. Casonãocorresponda,reajuste
o seletor de voltagem a fim de evitar avarias ou riscos de
incêndio e choque elétrico.
VICTOR COMPANY OF JAPAN, LIMITED
0498TNMFLEJEM
EN, SP PR, CH, AR
J
C
V
Download from Www.Somanuals.com. All Manuals Search And Download.
|