VHS • VideoCD COMBO
-
HR VCD1
TV
VCD
VHS
DISC
DISC
DISC
1
2
3
1
4
2
5
3
6
PlayBack
Control
7
8
0
9
'
COMPACT
OSD
10
+10
PROGRAM REPEAT VIDEO INTRO
MPX
TRACKING
ON/OFF
CANCEL RANDOM HIGHLIGHT
RETURN
KARAOKE SEARCH
PREV
SELECT
NEXT
'
REW
REC
PLAY
STOP
FF
PAUSE/STILL
TV
PROG
TV VOL
TV
SP/LP
PROG
GRAPHICS
DIGITAL VIDEO
3
2
1
MANUAL
SEARCH
DISC
DISC
DISC
3
2
1
/
POWER
TV VOL
KEY CONTROL
TV/VIDEO
STANDBY
3-DISC
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
SELECT
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC
1
MIC
2
MASKING
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
PAL NTSC
INS TRUCTIONS
LPT0002–0G2A
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Safety precautions
Importants
Theratingplateandthesafetycautionareontherearoftheunit.
• Video tapes recorded with this Player in the LP (Long Play)
or EP (Extended Play) mode cannot be played back on a
single-speed video recorder.
WARNING: DANGEROUS VOLTAGE IN-
SIDE
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOIS-
TURE.
• Itmaybeunlawfultorecordorplaybackcopyrightedmaterial
without the consent of the copyright owner.
Beware of moisture condensation
Moistureintheairwillcondenseontherecorderwhenyoumove
it from a cold place to a warm place, or under extremely humid
conditions — just as water droplets form on the surface of a
glass filled with cold liquid. Moisture condensation on the head
drum will cause damage to the tape. In conditions where
condensation may occur, keep the recorder’s power turned on
for a few hours to let the moisture dry.
/
The POWER
button does not completely shut off
mains power from the unit, but switches operating current
on and off. “ ” shows electrical power standby and “ ”
shows ON.
This unit produced to comply with Standard IEC Publ. 65.
CAUTION:
Ⅲ When you are not using the Player for a long period of
time, it is recommended that you disconnect the power
cord from the AC outlet.
Ⅲ Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or
fire hazard, remove the power cord from the AC outlet
prior to connecting or disconnecting any signal lead or
aerial.
Special note on head cleaning
Ⅲ ThisunitoperatesonvoltageofAC110 – 240V~(Rating),
AC90 – 260 V~(operating), 50/60 Hz with automatic
switching.
Accumulation of dirt and other particles on the video heads may
cause the playback picture to become blurred or interrupted.
Although this model is equipped with a built-in head cleaner
whichautomaticallycleanstheheads,reducingthelikelihoodof
dirty heads, if such troubles are encountered please consult the
nearest JVC dealer.
Precautions
Please follow these precautions. Not doing so may result
in damage to the Player, remote control, or video cassette.
Auto Head Cleaner
• Avoid extreme heat and direct sunlight.
• Avoid extreme cold.
A built-in head cleaner automatically cleans the video heads
and head drum whenever a tape is loaded or unloaded to
reduce head clogging.
• Avoid extreme humidity.
• Avoid dust.
• Avoid places subject to vibrations.
• Avoid strong magnetic fields.
• Do not block the Player's ventilation openings.
• Do not place anything heavy on the Player or remote
control.
ATTENTION:
This Player contains microcomputers. External electronic
noise or interference could cause malfunctioning. In such
cases, switch the power off and unplug the power cord.
Then plug it in again and switch on. Take out the cassette.
After checking the cassette, operate the unit as usual.
• Do not Place anything which might spill on top of the
Player or remote control.
• Do not place the Player on cushions, pillows, or thick
carpeting.
• Use the Player in a stable, horizontal position only.
• Place cassettes in cassette cases and store vertically.
When transporting
Ⅵ Be sure to remove cassette and CD from Player before
packing.
Ⅵ Avoid violent shocks to the Player during packing and
transport.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Care and handling of compact discs
How to handle CDs
Which compact discs can be used?
When handling a compact disc, do not touch the surface of the
disc (reflective silver side –– the side without the label).
Since compact discs are made of plastic, they are easily
damaged. If a disc gets dirty, dusty, scratched or warped, the
soundwillnotbepickedupcorrectlyand,inaddition,suchadisc
may cause the CD player to malfunction.
Many types of compact discs are sold for a variety of uses. The
Video CD Player can play the following compact discs:
•
Video CD
for audio and video (moving picture) repro-
duction, including multiplex sound.
PlayBack
Control
•
Video CD with Playback Control function
featuring menu-type operation and super-
fine still pictures for audio and video (moving
picture) reproduction, including multiplex
sound.
•
•
CD Graphics (CD-G)
for audio and video (still picture) reproduc-
tion, including multiplex sound.
'
'
Even on label side
Donotdamagethelabelside,stickpapertooruseanyadhesive
on its surface.
Digital Audio CD, including single discs
for audio reproduction.
CDs you can't play back
Do not play back CD-ROMs on this equipment. Doing so may
generate a noise which can damage your speakers.
Storage
Make sure that discs are kept in their cases. If discs are piled
oneontopofanotherwithouttheirprotectivecases, theycanbe
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Using the remote control
The remote control is ready to use when its batteries are
installed properly.
To use it, point its infrared light-emitting window toward the
display window of the player and press a button. The operating
range of the remote control is up to about seven meters in front
of the player and within about 30 degrees to each side –– with
nothing between the remote control and the player interrupting
the beam path.
Ifpressingabuttonontheremotecontroldoesnotproduceany
response, check to make sure it is pointed correctly and try
again. If it still does not function, check the batteries.
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc, wipe it
with a soft dry cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with
water. Never use record cleaners, petrol, alcohol or any anti-
static agents.
CAUTION
Sometimes during play noise or images may be garbled.
This is sometimes due to the disc. (It may not be up to
industry standards.)
Thesesymptomarecausedbythediscs, notbythemalfunc-
tion of the Player.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Indicators and Terminals
Front panel
1
2
3 4
5
7
6
3
2
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3
-DISC
1
SELECT
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
MIC 2
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
MASKING
STILL
MIC 1
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
NEXT
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
8 9
14
16
18
21
10
11
12
13
15
17
19
20
1
POWER
DISC 1 to DISC 3 trys
Open/Close buttons (Disc number 1 to 3) ੬ p.11
button / STANDBY indicator
1
DIGITAL ECHO knob ੬ p.25
3
5
6
7
8
9
1
SPATIALIZER switch and indicator ੬ p.20
MIX VOL knob ੬ p.29
1
DISC 1 through DISC 3 buttons with indicators ੬ p.10
KEY CONTROL buttons ੬ p.25
WIRELESS MIC button with indicator ੬ p.23
Cassette loading slot
17
MIC 1 and MIC2 knobs and MIC input terminals ੬ p.25
SP/LP/EP button ੬ p.20
1
19
CD REC button with indicator ੬ p.27,29
VIDEO/AUDIO input terminals ੬ p.26,28
2
0
MODE switch ੬ p.10
2
1
VHS CONTROL buttons
4 / ¢ Karaoke search buttons ੬ p.20
‰ Play button ੬ p.18
Video out select switch ੬ p.9
¶ Record button ੬ p.20
1
0
VOCAL REPLACE button ੬ p.25
VOCAL MASKING button ੬ p.25
MPX button ੬ p.14
§ Stop/Eject button ੬ p.18
8 Pause/Still button ੬ p.20
1
Display panel ੬ p.8
WARNING of cassette loading slot
Ⅲ Do not insert fingers or foreign objects into the
cassette loading slot since this could lead to injury
or damage to the mechanism. Be especially careful
with children.
Ⅲ Do not try to pull out a cassette once automatic
loading has started.
1
VIDEO INTRO button ੬ p.14
RETURN button ੬ p.16
1
‰ SELECT button ੬ p.11
7 Stop button ੬ p.12
8 STILL button ੬ p.12
4 PREV / ¢ NEXT buttons ੬ p.12
VCD NUMBER -/+ buttons ੬ p.16
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Indicators and Terminals (cont’d)
Wireless remote control
TV, VCD, VCP control buttons
First press these buttons before beginning to operate
the equipment.
TV
VCD
VHS
3
Number keys ੬ p.11
7
8
9
1
2
DISC 1
DISC 2
DISC 3
OSD
1
4
2
5
3
6
PROGRAM button [VCD] ੬ p.13
REPEAT button [VCD] ੬ p.14
TRACKING -/+ buttons [VCP] ੬ p.19
7
8
0
9
5
CANCEL button [VCD] ੬ p.13
RANDOM button [VCD] ੬ p.14
KARAOKE SEARCH -/+ buttons [VCP] ੬ p.20
10
+10
10
PROGRAM
REPEAT VIDEO INTRO
MPX
3
4
11
12
TRACKING
ON/OFF
CANCEL
RANDOM HIGHLIGHT
RETURN
NEXT
[VCD operation buttons]
4 PREV / ¢ NEXT buttons ੬ p.12
KARAOKE SEARCH
PREV
SELECT
‰ SELECT button ੬ p.11
REW
REC
PLAY
STOP
FF
7
STOP button ੬ p.12
8 PAUSE/STILL button ੬ p.12
5
6
PAUSE/STILL
TV VOL
TV
TV
PROG
SP/LP
PROG
13
14
[VCP operation buttons]
MANUAL
SEARCH
‰
PLAY / 1 REW / ¡FF / 7 STOP buttons ੬ p.18
TV VOL
KEY CONTROL
TV/VIDEO
¶ REC / 8 PAUSE/STILL buttons ੬ p.20
6
7
SP/LP button [VCP] ੬ p.20
TV/VIDEO button [TV] ੬ p.7
MANUAL SEARCH 1 / ¡ buttons [VCD] ੬ p.12
POWER
button
8
9
DISC 1 through DISC 3 buttons [VCD] ੬ p.10
OSD button [VCD] ੬ p.13
1
0
VIDEO INTRO button [VCD] ੬ p.14
AUTOTRACKING ON/OFF button [VCP] ੬ p.19
11
MPX button [VCD] ੬ p.14
Installing Batteries
TV sound mute
button [TV] ੬ p.7
Audio monitor button [VCP] ੬ p.19
1
HIGHLIGHT button [VCD] ੬ p.15
RETURN
button [VCD] ੬ p.16
13
TVVOL -/+ buttons [TV] ੬ p.7
1
TV PROG -/+ buttons [TV] ੬ p.7
KEY CONTROL b/# buttons [VCD] ੬ p.25
Open the battery compartment cover.
1
2
Insert 2 “AA/UM-3” size batteries (provided) in the
correct directions.
Replace the cover.
3
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Indicators and Terminals (cont’d)
TV Multi-Brand Remote Control
Your remote control can operate the basic functions of your TV
set. In addition to JVC TVs, other manufacture’s TVs can also
be controlled.
TV
VCD
VHS
TV button
(POWER)
button
DISC 1
DISC 2
DISC 3
OSD
1
4
2
5
3
6
NUMBER
keys
Before you start...
¶ Turn on the TV using its remote control.
¶ Press the TV button on the remote control.
NUMBER + 10
button
7
8
0
9
10
+10
NUMBER
10 button
OSD button
PROGRAM
REPEAT VIDEO INTRO
MPX
NOTE:
MUTE
button
TRACKING
CANCEL
ON/OFF
• If your TV is a JVC, you don’t have to set the code in step 1.
Go to step 2.
RANDOM HIGHLIGHT
RETURN
NEXT
KARAOKE SEARCH
PREV
SELECT
REW
REC
PLAY
STOP
FF
STOP
button
PAUSE/STILL
1 SET TV BRAND CODE
TV VOL
TV
PROG
TV
PROG
SP/LP
TV VOL
–/+ buttons
Refer to the chart below. While holding down TV, enter your
TV’s brand code using the NUMBER keys, then press STOP.
MANUAL
SEARCH
TV/VIDEO
button
TV VOL
KEY CONTROL
TV/VIDEO
¶ You don’t have to repeat this step until you replace your
remote control’s batteries.
TV PROG
–/+ buttons
2 TRY OPERATING TV
Press
on the remote control to turn the TV off. If it goes
off, try other operations.
¶ The
ton, TV VOL -/+ button and MUTE
remote control can all be used to operate the TV.
button, TV/VIDEO button, TV PROG -/+ but-
button on the
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
TV BRAND NAME
JVC
AIWA
CODE
01
10
BEIJING
CHANGHONG
DAEWOO
FERGUSON
FINLUX
05, 27
05, 06, 16, 25
11
15
20
09
13
17
07
18
23
26
06
19
22
27
Control Your TVUsingAdditionalButtons
FUNAI
The NUMBER keys on the remote control can also be used to
select the TV’s channel by setting the remote control to the TV
mode.
GOLDSTAR
GRUNDIG
HITACHI
ITT
JINXING
KONKA
MITSUBISHI
MIVER
NEC
1 Press the TV button.
Use the NUMBER keys, and the DIGIT ENTRY (NUMBER
10) button, the NUMBER +10 button or the OSD button to
select the TV’s channel.
2
NOBLEX
NOKIA
21
¶ DIGIT ENTRY (NUMBER 10) button corresponds to the 1-
digit/2-digit entry switching button (often labelled –/– –) of
your TV’s remote control.
¶ NUMBER +10 button corresponds to the 10 + button, and
the OSD button corresponds to the 20 + button of your TV’s
remote control.
PANASONIC
PEONY
PHILIPS
SAMSUNG
SANYO
SHARP
SONY
02
23, 24, 25
16
12
08
04
03
TCL
THOMSON
TOSHIBA
16, 28
14
05
NOTE:
• The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Indicators and Terminals (cont’d)
Display panel
4
8
9
10
1
2
3
PAL
PAL
NTSC
VCD PBC CD - G VHS
NTSC
DISC
KEY TRACK
REPLACE
MASKING
REPEAT1
RANDOM
MPX LR
NEXT
PROGRAM SP LP EP
L R
5
6
7
11
12
[VCD display]
[VCP display]
1
Disc number indicator
Key control indicator
Colour system indicator
Type of disc indicator
VHS mode indicator
3
5
9
Tape speed indicator
1
0
Colour system indicator
11
Symbolic mode indicator
3
Play
Rewind
¶
Record
¶8 Record pause
Track number indicator
Total number of tracks indicator
1
1
3Shuttle search
(reverse)
3
6
7
Each indicator in this area lights when
the corresponding function is activated.
Still/Slow
8
¡
Fast forward
3
¡Shuttle search
(forward)
Cumulative time of the track indicator
Total time of the disc indicator
1
Audio mode indicator
Rear panel
1
2
3
OUT1
OUT2
WIRELESS MIC ANT.
AUDIO
AUDIO
R
L
NT8C3.58
NTSC
ON PAL TV
NTSC4.43
FREQ
ADJUST
VIDEO
4
5
MIC Frequency Adjustment screws ੬ p.23
1
3
Wireless MIC antenna terminals ੬ p.23
Colour System Output switch ੬ p.9
VIDEO/AUDIO output terminals ੬ p.9,26
Power cord
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Make sure that the power to the Player and TV is off before
making the following connections.
OUT1
OUT2
WIRELESS MIC ANT.
AUDIO
AUDIO
R
L
NT8C3.58
NTSC
ON PAL TV NTSC4.43
FREQ
ADJUST
VIDEO
How to connection
Colour system output mode selec-
tion (VCP)
1 CnaolnsnteoctthtehePTlaVy’esrV'sIDVEIDOEiOnpouuttapnudt AanUdDIAOUiDnpIOutotuetrpmuit-
To watch an NTSC tape, it will be necessary to select one of the
following output modes.
terminals.
2 Connect the power cord to your household AC outlet.
Selecting the NTSC PLAYBACK ON PAL TV mode
Select this mode to watch NTSC tapes on a PAL system TV.
Notes:
NTSC3.58
NTSC
• Connection not available with television sets without audio/
video input terminals.
PLAYBACK
NTSC4.43
ON PAL TV
• If you put a TV set directly on this Player or install it too close
to a TV set, noise may occur. If this noise occurs, separate
the Player and the TV set.
Video out select (VCD)
Selecting the NTSC 3.58 mode
Select this mode to watch NTSC tapes on a NTSC system TV.
Set the VIDEO OUT SELECT switch on the front panel to
NTSC or PAL mode according to your television system.
NTSC3.58
NTSC
PLAYBACK
NTSC4.43
ON PAL TV
NTSC........ for NTSC exclusive TV
PAL .......... for PAL exclusive TV
Note:
• If the wrong video system mode for the Video CD is se-
lected, it will not playback with the correct screen size.
Selecting the NTSC 4.43 mode
Select this mode to watch NTSC tapes on a multi-system TV
(that has an NTSC 4.43 setting).
Select NTSC 4.43 to record NTSC 4.43 signal.
NTSC3.58
NTSC
PLAYBACK
NTSC4.43
ON PAL TV
Note:
• Adjust the System Output switch to the appropriate position
in order to record NTSC signals.
Select the NTSC PLAYBACK ON PAL TV or NTSC 3.58 to
record NTSC 3.58 signals.
Select NTSC 4.43 to record NTSC 4.43 signals.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback (Video CD)
OPEN/CLOSE DISC1 through 3
buttons buttons
POWER button
3
2
1
DISC
3
2
1
/
POWER
DISC
DISC
STANDBY
3-DISC
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
SELECT
DOWN
UP
WIRELESS MIC
MIC 2
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
MASKING
STILL
NEXT
MIC 1
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
PREV/NEXT buttons
MODE switch
SELECT button
Overview of the three modes
This Player has three (3) modes called KARAOKE, NORMAL,
andPBCOFFmode. TheseareselectedbytheMODEswitch.
This enables various ways of playing a video CD.
VCD button
KARAOKE NORMAL PBC OFF
TV
VCD
VHS
POWER
button
DISC 1
DISC 2
DISC 3
OSD
1
4
2
5
3
6
KARAOKE mode : One track playing mode. Whenever one
trackhascompletedplay,thePlayerstops.
NORMAL mode : Continuous plural tracks playing mode.
The Player plays tracks continuously in
the order they appear on the disc.
DISC1
through 3
buttons
7
8
0
9
10
+10
Number keys
PBC OFF mode : This mode is identical to the NORMAL
mode, except that the PBC function is
inhibited.
PROGRAM REPEAT VIDEO INTRO
MPX
TRACKING
ON/OFF
CANCEL RANDOM HIGHLIGHT
RETURN
NEXT
KARAOKE SEARCH
PREV/NEXT
buttons
PREV
SELECT
To set the mode, switch the MODE switch on the left side of the
front panel.
REW
REC
PLAY
STOP
FF
PAUSE/STILL
TV VOL
TV
PROG
TV
SP/LP
PROG
SELECT
button
MANUAL
SEARCH
TV VOL
KEY CONTROL
TV/VIDEO
Triple disc tray usage
Up to three (3) discs can be loaded in the Player. You may insert
a disc into any of the disc trays 1 through 3 whichever you prefer.
If you want to play only a specified disc, press the correspond-
ing disc 1, 2 or 3 button located to the right of the 0 (OPEN/
CLOSE) button.
When three discs are in inserted, basic order of playing is as
following.
•
•
•
Pressing DISC 1: DISC 1 → DISC 2 → DISC 3 → STOP
Pressing DISC 2: DISC 2 → DISC 3 → DISC 1 → STOP
Pressing DISC 3: DISC 3 → DISC 1 → DISC 2 → STOP
3
2
3
DISC
TRIPLE TRAY
1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback (Video CD) (cont'd)
In order to operate by remote control, first press the VCD button.
Preparation for playing
Starting to play disc(s)
Turnonthetelevisionset,amplifierorreceivertowhichthe
Player is connected, and then select the proper channel
and mode to operate the Player, and set the sound volume
to a reasonable level.
Press the 3 SELECT (PLAY) button. The Player starts to
play from the disc indicated in the Display window.
Press one of the DISC 1 through 3 buttons and the Player
plays the disc you pressed, from the 1st track. For indi-
vidual track selection, use the number keys on the remote
control.
Press the POWER
control.
button on the front panel or remote
3
SELECT
/
POWER
or
2
1
The STANDBY indicator
goes out.
STANDBY
The display window shows the initial information as shown
below.
When you start play, the Display window shows disc number
and the track number being played.
During play, the indicator on the DISC button blinks.
If the PBC function is activated, the display window shows “Pb”
and the television screen shows the initial menu, DISC number,
and “PBC”. See page 16 “Playback Control function”.
Easy start up
Without pressing the POWER
button you can start up
the Player by pressing 3 SELECT button or disc buttons.
Inserting/removing the disc(s)
Using number keys
Press the number keys on the remote control to select
numbers.
Press the 0 (OPEN/CLOSE) button (1 through 3) to open
the disc tray. Then place the disc in the round recess of the
tray with label side up. To close the tray, press the 0
(OPEN/CLOSE) button again.
Example: For number 5, press 5. For number 15, press +10,
then 5. For number 20, press +10, then 10. For number 32,
press +10 three times, then 2.
If you press the 0 (OPEN/CLOSE) button of the playing disc,
the Player stops and then opens the tray.
If you press the 0 (OPEN/CLOSE) button of a disc that is not
being played, you can change discs without stopping play.
1
4
2
5
3
6
7
8
0
9
3
2
1
10
+10
Note :
• When you press number keys, track will start playing without
pressing 3 SELECT button.
Note :
•
When loading a disc in the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc will be damaged
when the disc tray is closed, and the disc cannot be removed
from the unit.
CD
Tray
CORRECT
INCORRECT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback (Video CD) (cont'd)
SELECT button
DISC1 through 3 buttons
3
2
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3-DISC
1
SELECT
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
MIC 2
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
MASKING
STILL
MIC 1
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
NEXT
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
STOP
PREV/NEXT
STILL
button
buttons buttons
In order to operate by remote control, first
press the VCD button.
Stopping play
VCD button
Press the 7 (STOP) button to stop play at any time.
TV
VCD
VHS
DISC 1
DISC 2
DISC 3
OSD
1
4
2
5
3
6
Pausing play
DISC1
through 3
buttons
7
8
0
9
Press the 8 STILL (PAUSE) button to temporarily suspend
play.
10
+10
PROGRAM
OSD button
button
PROGRAM REPEAT VIDEO INTRO
MPX
Notes :
•
TRACKING
CANCEL RANDOM HIGHLIGHT
ON/OFF
Whenthe8STILL(PAUSE)buttonispressedonce,“PAUSE”
appears on the television screen, the video motion freezes
and the sound is turned off. The still picture advances frame-
by-frame each time the 8 STILL (PAUSE) button is pressed.
This frame-by-frame function is effective only for video CDs.
To release the pause, press the SELECT or blinking DISC 1
through 3 button.
RETURN
NEXT
CANCEL
button
KARAOKE SEARCH
PREV
PREV/NEXT
buttons
SELECT
REW
REC
PLAY
STOP
FF
PAUSE/STILL
PAUSE/STILL
button
STOP
button
TV VOL
TV
TV
PROG
SP/LP
PROG
•
•
MANUAL
SEARCH
SELECT
button
MANUAL
SEARCH
buttons
During “PAUSE” the time counter on the display will blink.
TV VOL
KEY CONTROL
TV/VIDEO
Auto search
During play, pressing the 4 PREV button once causes
the Player to replay the current track from the beginning.
Pressing the 4 PREV button twice causes the Player to
play the previous track. Pressing the ¢ NEXT button
once causes the Player to skip to the next track.
Manual search
Holding down the 22 / 33 MANUAL SEARCH buttons on
the remote control or the
4
PREV /
¢
NEXT buttons on
the front panel cause the disc to fast forward or reverse.
Continuing to hold down the buttons causes it to search
much faster.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Various Unique Functions
In order to operate by remote control, first press the VCD button.
Display of operations status
Canceling a programmed track
Press the OSD button on the remote control. By pressing
the OSD button, the following information may be easily
andquicklydisplayedorvanishedonthetelevisionscreen.
There are three (3) canceling functions (canceling the last
programmed track, canceling the current track, canceling
the next track to be played).
Time, Disc mode, Echo effect, Key control, Program, Repeat,
Random, Multiplexing, Vocal replace, Vocal masking
•
To cancel the last programmed track press the CANCEL
button on the remote control and the last programmed
track will be canceled. This can be done while a disc is
playing.
2-1
1:30
OSD
PROGRAMMED SONGS
2-1
2-2
2-3
2-4
2-5
3-1
1-1
1-2
1-3
(Remote control)
The number located lowest is the
latest track programmed.
(Television screen)
(Television screen)
Programmingthetracksequenceyouwant
•
•
To cancel the current track press 7 STOP button.
To cancel the next track, wait until the current track has
finished and press the ¢ NEXT button and the next
trackwillbecanceledandthemachinewillgotothenext
programmed track.
Preparation
It is not possible to enter programming mode during play.Verify
whether the Player is playing. If playing, stop the player with the
7 STOP button.
Note :
To verify the track you programmed, stop the Player and see
Operation
•
1. Press the PROGRAM button on the remote control to
enter the programming mode.
ON SCREEN information.
PROGRAM
Clearing a program
To delete all programmed tracks you have entered, press
the7 STOPbuttonandthenthePROGRAMbutton. “PROG
OFF” will be displayed on the television screen.
2. Specify the disc by the DISC (1 through 3) button and
then the track by the number keys successively. You
can program up to nine (9) tracks by repeating this
procedure.
PROGRAM
STOP
3. To play the programmed track press the 3 SELECT
button.
Notes :
•
The track number playing, next track programmed, and
numberofprogrammedtracksaredisplayedfromtheleft-top
of the television screen. You may use the OSD button to
delete this information.
Note :
•
The Player does not cancel the track program even if the 7
(STOP) button is pressed. Pressing the 3 SELECT (PLAY)
button again causes the Player to resume playing from the
next track.
•
•
Once the programmed track is played, it is deleted from the
program.
You may continue to program even while the disc is playing.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Various Unique Functions (cont'd)
In order to operate by remote control, first press the VCD button.
Repeating tracks
Playing a multiplex sound CD
It is possible to repeat all discs or only a single track.
This function is used for multiplex sound discs.
Preparation
This function is controlled by the remote control.
Operation
By pressing the MPX button, channel multiplexing modes
are cycled as shown below.
Operation
MPX
By pressing the REPEAT button, channel REPEAT modes
are cycled as shown below.
REPEAT
→All discs
→1 track
NORMAL
(left-channel/
right-channel)
L-CH MONO
R-CH MONO
(Remote control)
(Display window)
REPEAT ALL
(All discs)
REPEAT1
(1 track)
REPEAT OFF
(Television screen)
(Television screen)
ViewingtheVIDEOINTROofavideoCD
Notes :
•
When playing a programmed sequence of tracks,only one
track repeat is available.
Preparation
When you play a video CD with the Playback Control function,
the mode switch is recommended to be in the PBC OFF mode
or KARAOKE mode.
•
Only REPEAT1 is available in KARAOKE mode.
Randomly playing tracks
Operation
1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the Player or the
remote control just after starting disc play. Then the
Player starts to display in sequence the first five (5)
seconds and track numbers of all tracks on the disc.
Preparations
•
•
This function is controlled by the remote control.
TheRANDOMbuttoniseffectiveonlyinNORMAL/PBCOFF
mode.
•
This function plays tracks randomly from a single disc.
VIDEO INTRO
Operation
1. Stop the Player.
2. Press the RANDOM button and random playing will
start.
3. To select a track during digest display, press the num-
berkeycorrespondingtotheitemnumberonthescreen.
RANDOM
VIDEO INTRO
(Remote control)
1
4
7
2
5
8
3
6
9
3. To cancel random playing, after stopping the Player [7
(STOP) button], press the RANDOM button again.
RANDOM
STOP
(Television screen)
Note :
Random is not effective in program or KARAOKE mode.
•
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Various Unique Functions (cont'd)
In order to operate by remote control, first press the VCD button.
ProgrammingduringVIDEOINTRO
Playing CD Graphics
Operation
Basic video CD-playing procedures apply although the pictures
are still. A CD Graphics is identified by “CD-G” shown on the
display.
1. Press the PROGRAM button on the remote control so
that PROGRAM is lit in the display.
2. Pressthediscbuttonyouwanttoplay,andenter1onthe
keypad.
Notes :
3. Press the 3 SELECT button and then, after the disc has
started to play, press the VIDEO INTRO button.
4. The Player starts to display in sequence the first five (5)
seconds and track numbers of all tracks on the disc.
Select the number you want to program. You can
program nine (9) tracks.
•
The following operations may distort the image on the
screen.
Searching for starting point of music
Fast forwarding/reversing
Stop/pause
5. Press the 3 SELECT button to play.
•
If paused, the screen changes to blue in a few minutes. This
is to prevent burn-in of the TV screen.
Playing digital audio CDs
Viewing the highlights of a video CD
This function is used for a movie video CD.
Preparations
BasicvideoCD-playingproceduresapplytothereproductionof
sound.
•
When you play a video CD with the Playback Control
function, the mode switch is recommended to be in the PBC
OFF mode or KARAOKE mode.
Note :
•
No indicator will turn on to show the type of the disc on the
display.
•
This function is controlled by the remote control unit.
Operation
1. Start playing the track you want to see the highlights of.
2. After the track begins to play, press the HIGHLIGHT
button on the remote control.
HIGH LIGHT
HIGHLIGHT
1
4
7
2
3
6
9
5
8
(Remote control)
(Television screen)
3. To select one of the nine (9) segments, press the num-
ber key (1 to 9) of the segment which you want to play.
Notes :
•
•
•
When you choose a highlight it will start from five (5)
seconds before the shown time below each segment.
The highlights show the proceeding five (5) seconds up to
the displayed time on each highlight.
The segments are each of nine (9) equal-time period divi-
sions of the track.
•
•
Nine (9) different highlights are displayed for one (1) minute.
If no highlight is choosen in the one (1) minute period in
normal mode or PBC OFF mode the next nine (9) segment
highlights will begin, in KARAOKE mode highlights will
stop.
•
While in VIDEO INTRO or HIGHLIGHT, sometimes image
is garbled partially. This symptom is caused by noise in the
disc itself or incorrect manufacturing, it is not caused by a
malfunction of the Player.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Control Function
Playing Video CDs with Playback
Control function
This Player provides a Playback Control function which uti-
lizes a procedure (menu selection) programmed in a video
CD. The playback operation procedure may differ depending
on the disc you use.
Operation
1. Verify that the Player is in NORMAL mode.
KARAOKE NORMALPBC OFF
The Playback Control function is described below and in the
figure.
• High-resolution still image display - Super-fine reproduction
of still images with more than 4 times the resolution of video
tape.
2. Press the DISC (1 through 3) or 3 SELECT button, and
then the Player starts up the PBC function. “Pb” is
shown in the Display window. The main menu, “PBC”,
and disc/track number are displayed on the television
screen.
• Menu-driven playback - interactive menus for easy selection
of tracks
3
SELECT
Preparations
• A video CD with the Playback Control function is required for
this operation.
or
2
1
• Only the NORMAL mode can be used.
• The buttons available for use are the number keys, VCD
NUMBER –/+ buttons, the 4/¢ PREV/NEXT buttons,
3 SELECT button, DISC (1 through 3) buttons, and
RETURN button.
Button functions
Player's VCD NUMBER –/+ buttons
remote control's Number keys
2-PBC
PBC
1
2
3
4
(Including +10 button) .............. Select a specific menu item
from the television screen or
monitor.
(Television screen)
4/¢ PREV/NEXT buttons.. Move through menu.
3 SELECT button .................... Starts up a video CD with the
3. To move through the menus, press the 4 ¢PREV/
PBC function in DISC tray 1
to 3.
NEXT buttons.
PREV
NEXT
DISC (1 through 3) buttons ...... Start up a video CD with the
PBC function in the specified
DISC tray.
RETURN button ................. Returns to the menu.
4. When the menu you want appears, select an item in the
menu by using the number keys. The numbers on the
number keys correspond to the menu item numbers.
5. To return to a menu and stop the track being played,
press the
RETURN button.
RETURN
Notes :
•
•
•
•
Page numbers in the menu show that preceding pages
exist. To move from the current menu, press the 4/¢
PREV/NEXT buttons.
If you have no desire to use the PBC function when playing
a disc with the PBC function, switch the MODE switch to
“PBC OFF” before playing.
When you change the mode switch except NORMAL mode
during play Playback Control disc, the play stops, so reset
again from the beginning.
If you press number keys directly to select the track, you
can’t enter the Player into PBC mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Control Function (cont'd)
Video CD with Playback Control function
What is Playback Control function?
•
•
Menu-driven playback
You can interact with the screen using a menu display to
select and play an entry.
The Playback Control function, ushering a new video CD age,
allows you to enjoy menu-driven operation and high-resolution
still images having a resolution four times greater than moving
pictures.
High-resolution still image display
You can display high-quality images four times clearer than
moving pictures.
Example of playback by the Playback Control function
Menu screen
Press
RETURN
Moving
picyure
To next screen
Press
RETURN
Moving
picyure
Moving
picyure
Moving
picyure
Moving
picyure
Still
picyure
Still
picture
Moving
picyure
Moving
picyure
To previous screen
Press
RETURN
4. After playback, press RETURN to go back to the previous
screen.
A selection menu is displayed when you start playing a
video CD disc with the Playback Control feature. The
selection menu shows a list of numbers for selection. Some
discs may show moving pictures or a divided screen.
After playback, pressing RETURN for 2 seconds or more
causes it to go back to the previous menu selection.
Some discs may return you to the menu screen shown
before playback.
1. When a list of numbers is displayed, selecting a number
shows its contents.
Note :
When a menu is displayed for a long time, about 10 minutes,
the screen background automatically fades out to prevent
screen burn-in while the setting is suspended.
2. When a moving picture is displayed, pressing SELECT at
the time when a part of the movie you desire is shown
plays the movie.
3. When the selection menu is redisplayed after you have
played your selection, selecting a number again can
replay its contents. (Some discs may show the menu
screen several times.)
When “Next” and “Prev” are shown, pressing “NEXT” or
“PREV” can change the selection menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The video cassette
Playback(Videocassetteplayer)
NTSC, PAL and MESECAM video tapes can be played back on
this Player. Refer to the “Colour system output mode selection
( ੬ P. 9)” section for details.
Inserting a cassette
3
DISC
DISC
DISC
3
2
1
/
POWER
2
STANDBY
3-DISC
TRIPLE TRAY
1
SELECT
KARAOKE NORMALPBC OFF
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC
1
MIC
2
MASKING
RETURN
DIGITAL ECHO
MIX VOL
Before proceeding:
/
MPX
PREV
SP
/
LP EP
/
LIVE RECORDING
VIDEO (MONO) AUDIO
VIDEO CD
L
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
VCD FRONT AV
OFF ON S.ST
GRAPHICS
MIN
N
MAX
VCD NUMBER
CD REC
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
• Turn on the power of the TV and Player.
• Make sure that the TV’s TV/VIDEO switch is set to VIDEO.
•
Press the remote control's VHS button.
3
2
1
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3
-
DISC
KARAOKE NORMALPBC OFF
TRIPLE TRA
Y
SELECT
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC
I
MASKING
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
EP
LIVE RECORDING
VIDEO (MONO) AUDIO
VIDEO CD
TV
VCD
VHS
L
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
ATIALIZER
VCD FRONT AV
OFF ON S.ST
GRAPHICS
MIN
VCD NUMBER
COMPACT
SP
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
1 2
DISC
DISC
DISC
1
2
3
1
4
2
5
3
6
7
8
0
9
3
2
OSD
10
+10
ISC
TRAY
1
SELECT
KEY CONTROL
NORMAL
VHS CONTROL
PROGRAM
REPEAT VIDEO INTRO
MPX
DOWN
UP
WIRELESS MIC
VIDEO
INTRO
7 Insert the cassette as shown and push it gently into the
TRACKING
ON/OFF
STILL
NEXT
MIC
1
MIC
2
RETURN
CANCEL
RANDOM HIGHLIGHT
RETURN
DIGITAL ECHO
MIX VOL
/
PREV
SP
/
L
P
/
E
P
LIVE RECORDING
VIDEO (MONO) AUDIO
KARAOKE SEARCH
PREV
Player
L
R
/I
SELECT
NEXT
MIN
MAX
VCD
OFF
FRONT AV
ON S.ST
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
2
SPATIALIZER
REW
REC
PLAY
STOP
FF
The Player will be turned on automatically and the cassette
will be loaded.
PAUSE/STILL
TV
PROG
TV VOL
TV
PROG
SP/LP
MANUAL
SEARCH
TV VOL
KEY CONTROL
TV/VIDEO
7 Press the Stop/Eject § button to eject a cassette.
During playback or recording, press the § button twice
(once to stop the tape and once more to eject it).
Notes:
Load a pre-recorded cassette.
If the safety tab on the cassette is removed, playback will
start automatically.
• If the cassette’s safety tab has been removed, playback will
start automatically when the cassette is inserted.
• A cassette can also be ejected when the power is off.
1
2
Press the Play 4 button to start playback.
Special note on Video Cassettes
7 Press the Stop/Eject § button or the remote control’s
To prevent accidental recording on a recorded cassette, re-
move its safety tab. To record on it later, cover the hole with
adhesive tape.
Stop 7button to stop playback.
To fast forward or rewind the tape:
7 From the stop mode, press the remote control's Fast
forward ¡ or Rewind 1 button.
Safety tab
NTSC Playback on PAL TV
• The vertical size of the playback picture will shrink and some
picture “noise” may appear on the screen.
• The playback picture may roll. In this case adjust the picture
with the TV’s vertical hold knob (with some TV’s this adjust-
ment may not be possible).
To watch a compact VHS tape
• The colour of the playback picture may differ from the
original.
• In the forward/reverse shuttle search or still modes there
may be no colour depending on the TV and Player combina-
tion.
Compact VHS camcorder recordings can be played on your
Player. Place the recorded cassette into a Cassette Adapter
and it can be used like any full-sized VHS cassette.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features
In order to operate by remote control, first press the VHS button.
Slow motion playback
Repeat playback
Slow motion playback is 1/6 of the normal playback speed. The
sound will be cut during slow motion playback.
Use this feature to repeat playback of a cassette 20 times.
During playback:
During playback:
Press the Play 3 button for more than 5 seconds.
1 The Play 3 indicator will blink slowly and playback of the
1 Press the Pause 8 button for 2 seconds.
cassette will repeat 20 times automatically.
Press the Stop 7 button to stop repeat playback.
7 Press the Play 3 button to return to the normal playback
2 Tape playback will be stopped and the repeat playback
speed.
mode will be cancelled.
Notes:
Rewind power off
• If the picture shakes during the slow mode, use the manual
tracking +/– buttons to correct the picture.
• There will be some picture disturbance and loss of colour
during slow motion playback.
When the tape has finished rewinding, the Player will turn itself off.
During stop:
• After approx. 5 minutes, the slow mode will disengage to
Press the remote control's Rewind 1 button.
protect the video tape.
1
2
Press the
button within 2 seconds.
“1” indicator blinks on the display panel.
Still picture and frame advance
Use this feature to freeze the playback picture and to advance
one frame at a time. The sound will be cut during this mode.
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted
in the Player, you may wish to adjust tracking manually during
playback.
During playback:
Press the Pause 8 button.
Manual tracking:
1
The picture will be frozen.
Press the remote control’s ON/OFF button.
PressthePause8buttonrepeatedlytoadvanceframes.
1
2
2
Eachtimethebuttonispressedthestillpicturewilladvance
Press the remote control’s TRACKING + or – button to
adjust tracking.
one frame.
7 Press the Play 3 button to resume normal playback.
7
Press the ON/OFF button to return to automatic tracking.
Notes:
Notes:
• Trackingmayneedtobeadjustedeachtimeadifferentvideo
• If the picture shakes during the still mode, use the manual
tracking +/– buttons to correct the picture.
• After the picture has been frozen for approx. 5 minutes, the
still mode will disengage to protect the video tape.
tape is inserted for playback.
• Tracking will be automatically set to the reference position
when the cassette is ejected.
Soundtrack selection
Your Player is capable of recording three soundtracks (HIFI L,
HIFI R and NORM) simultaneously, and playing back the
selected soundtrack.
Shuttle search playback
Use this feature during playback to visually locate any point on
arecordedcassette. Thesoundwillbecutduringshuttlesearch
operation.
During Playback:
During playback:
Press the remote control's Audio mointor
to change the soundtrack.
button
1
1 P1resbsuthtteonremtooetencgoangteroslh'suFttalsetsfoerawrcahrdf¡orwoarrdReowr irned-
Track (on display panel)
Use
L + R
verse.
for Hi-Fi stereo tapes
=
L
R
for main audio of bilingual tapes
for sub audio of bilingual tapes
for audio-dubbed tapes
7 Press the Play 3 button to resume normal playback.
Notes:
No indication (normal)
L + R (blink)
• When the Player is in the stop mode, press the Play 3 button
to start playback before engaging the shuttle search mode.
• For short searches, keep Fast forward or Rewind button
pressed for more than 2 seconds. When released, normal
playback will continue.
mixed normal and L+R audio
Note:
• Normally use the “L+R” position. Then Hi-Fi stereo tapes are
played back in stereo, and tapes with normal audio only are
played back automatically in the normal mode.
• Disturbances in the shuttle search picture are normal and do
not indicate a problem with the Player.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PlaybackFeatures(cont'd) Recording
Use the following procedure to record TV programmes on a
blank video tape.
Karaoke search
Use this feature to access to the start of the next tune to be
sung.
Before proceeding:
Press Karaoke search 4 or ¢ button on the front
• Connect the TV's VIDEO and AUDIO OUT connectors to
the Player's VIDEO and AUDIO IN connectors.
• Turn on the power of the TV and Player.
• Make sure that the video cassette’s safety tab is intact. If it
has been removed, cover the hole with adhesive tape.
1
panel.
Playback will start automatically, when the specified song
is found.
Notes:
•
Press ther remote control's VHS button.
• Karaoke search does not work with a tape which has no
signal on its normal soundtrack. Also, if the length of blank
parts between tunes is shorter than 3 seconds, if the
tune has a fade-out ending, or if the tape contains ex-
cessive noise signals, Karaoke search may not work prop-
erly with that tape.
TV
VCD
VHS
1
DISC
DISC
DISC
1
2
3
1
4
2
5
3
6
7
8
0
9
• When you are not using the microphone, disconnect the
3
2
OSD
10
+10
microphone from the MIC input terminals. When conne
c
t-
SC
IRAY
1
SELECT
PROGRAM
REPEAT VIDEO INTRO
MPX
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
VIDEO
INTRO
ing and disconnecting the microphone, it is recommended
TRACKING
ON/OFF
STILL
NEXT
MIC
1
MIC
2
I
RETURN
CANCEL
RANDOM HIGHLIGHT
RETURN
DIGITAL ECHO
MIX VOL
/
3
2
PREV
SP
/
L
P
/
E
P
to set the power of Player to OFF.
LIVE RECORDING
VIDEO (MONO) AUDIO
KARAOKE SEARCH
PREV
L
R
SELECT
NEXT
MIN
MAX
VCD
OFF
FRONT AV
ON S.ST
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
SPATIALIZER
REW
REC
PLAY
STOP
FF
PAUSE/STILL
TV
PROG
TV VOL
TV
PROG
SP/LP
MANUAL
SEARCH
TV VOL
KEY CONTROL
TV/VIDEO
3 2
Spatializer®
This function improves the realistic effect of the audio during
playback or recording.
Spatializer® has no effect on recording quality.
Load a blank video tape.
1
2 Press SP/LP/EP button to select the tape speed.
3
DISC
DISC
DISC
3
2
1
/
POWER
2
STANDBY
3-DISC
TRIPLE TRAY
1
SELECT
KARAOKE NORMALPBC OFF
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
Press the Record ¶ button to start recording. (On the
VOCAL
MASKING
STILL
NEXT
MIC
1
MIC
2
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
3
PREV
SP
/
LP EP
/
remote control unit press the REC ¶ and PLAY 3
LIVE RECORDING
VIDEO (MONO) AUDIO
VIDEO CD
L
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
VCD
OFF
FRONT AV
ON S.ST
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
COMPACT
SPATIALIZER
button at the same time.)
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
7 PresstheStop/Eject
buttonortheremotecontrol’s
STOP 7 button to stop recording.
SPATIALIZER lamp
SPATIALIZER switch
To stop recording temporarily:
7 Press the Pause 8 button.
Select the desired audio with the SPATIALIZER switch.
7 The SPATIALIZER lamp lights up when “ON” or “S.ST”
is selected.
Press the Play 3 button to resume recording.
Notes:
• To engage recording standby, press the Record ¶ button
and then press the Pause 8 button. Press the Play 3 button
again to start recording.
• If the Record ¶ button does not work, check to see if the
cassette safety tab has been removed.
• The player automatically stops when record-standby contin-
ues for more than 5 minutes.
OFF
ON
Set to this position to enjoy the original audio.
Set to this position to enjoy a movie or music pro-
gram in stereo audio with an enhanced quality.
S.ST
Set to this position to enjoy monaural audio tape in
simulated stereo. (S.ST: Simulated Stereo)
• The video tape will be rewound automatically when the end
of the tape is reached.
Notes:
• Spatializer® is effective only with a stereo TV.
• When this Player is used as the player for editing, the
recorded audio will correspond to the Spatializer® setting.
• Set to OFF when using a microphone.
• The picture may be disturbed or the sound volume may be
distorted depending on which unit is connected. This is
because the sound volume will be higher in the ON or S.ST
positions.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke Features
Connecting to Hi-Fi stereo system
FM tuner
Stereo amplifier
AUX IN or TAPE MONITOR
Back of Player
OUT1
OUT2
WIRELESS MIC ANT.
Television
AUDIO
AUDIO
R
L
NT8C3.58
TV NTSC4.43
FREQ
ADJUST
VIDEO
Speaker
Speaker
VIDEO IN
If you have a Hi-Fi stereo system, you can connect your Player
to it so that the sound can be heard through your Hi-Fi system.
Please make these additional connections:
CAUTION:
Ⅵ This player has a dynamic range of more than 90 dB
with regards to its Hi-Fi audio capability. It is
recommended that you check the maximum level if
you are going to listen to the Hi-Fi audio signals
through a stereo amplifier. A sudden surge in speaker
input may cause speaker damage.
Hi-Fi audio connection
Connect the AUDIO OUT “L” and “R” connectors of
the player to the AUX IN or TAPE MONITOR terminals
of the amplifier.
Ⅵ Some speakers and televisions are specialty shielded
to prevent television interference. If both are of the
non-shielded type, do not place the speakers adjacent
to the TV set, otherwise the video playback picture
may be adversely affected.
1
Notes:
• Make sure “L” and “R” are correct when connecting the
audio input and output connectors of the player to a stereo
amplifier.
• When listening to sound from the connected stereo system,
turn down the sound volume of the TV completely.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke Features (cont’d)
Microphone
How To Use
To use as a wired microphone
InserttheconnectorcabletotheendoftheMicrophone
as illustrated and turn it clockwise to fix.
1
Set the MIC select switch to “WD. (Wired)”.
2
MIC select switch
FREQ. screw
To use as a wireless microphone
Insert the antenna cable to the end of the microphone
as illustrated and turn it clockwise to fix.
1
Set the MIC select switch to “WL. (Wireless)”.
2
Battery compart-
ment cap
ATTENTION:
When you are not using the microphone, it is recom-
mended to set the MIC select switch to OFF: otherwise the
batteries will discharge even when not in use.
To MIC input terminal 1 or 2
on the front panel.
Connector cable or Antenna cable
Installing Batteries
Unscrew and remove the battery
compartment cap.
Insert 2 “AA/UM-3”-size batteries
(provided) in the correct directions.
Screw the cap back on.
1
2
3
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke Features (cont’d)
The Karaoke Control Centre on the Player’s front panel
gives you direct access song search, and sound volume/
echo control. The provided microphone can also be used
as a wireless microphone.
OUT1
OUT2
WIRELESS MIC ANT.
AUDIO
AUDIO
R
L
NT8C3.58
NTSC
ON PAL TV
FREQ
ADJUST
VIDEO
Preparation
To use the microphone as a wireless microphone
You need to connect the provided FM feeder cable to the
Player.
While you press the lever, connectors, insert the pro-
vided FM feeder cable into the connectors.
1
If there is interference when using the micro-
phone
Release the lever.
2
Follow the steps below to re-adjust the frequency of the micro-
phone and your Player.
Preparation
1. Turn on your TV and Player.
2. Select the TV’s VIDEO channel.
3. Press the WIRELESS MIC button on the Player's front
panel.
Ⅵ The WIRELESS MIC indicator will light.
4. Set the microphone’s MIC select switch to “WL. (Wireless)”.
5. Turn the MIC knob on the front panel of the player in order
to adjust to the desired sound volume.
6. Set the MIX VOL knob on the player's front panel to the
center or VCD.
HangtheFMfeedercableonthewallbehindthe Player
so that the cable forms a “T”.
3
FM feeder antenna
Operation
1. Turn tightly the FREQ. screw on the Player's rear panel in
either direction with the provided screwdriver (attached at
the rear of the battery compartment).
2. While speaking into the microphone continuously. Turn the
microphone’s FREQ. screw with the provided screwdriver
in the same direction as in step 1. until your voice can be
clearly heard from the TV’s speaker.
Check
1. First set the microphone’s MIC select switch to “OFF”. And
set the switch to “WL. (Wireless)”.
2. Speak into the microphone and check if your voice can be
heard from the TV’s speaker.
WIRELESS MIC ANT.
Ⅵ If your voice cannot be heard. Try again steps 1 and 2 of
“Operation”.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke Features (cont’d)
Follow steps 1 and 2 of “To use as a wireless micro-
phone”. (੬ p.22)
Basic operations
4
Turn on the TV and select VIDEO channel.
Press the Player’s WIRELESS MIC button to make the
button light.
1
5
Set the microphone’s switch to “WD. (Wired)”.
WIRELESS MIC button
2
3
Insert the disc or a pre-recorded Karaoke tape.
Ⅵ If the safety tab on the cassette is removed, playback
will start automaitcally.
KEY CONTROL
NORMAL
VHS CONTROL
Press Play 3 button.
UP
WIRELESS MIC
MIC 2
4
5
MIC 1
MIX VOL
/
Start singing.
SP
/
LP EP
/
LIVE RECORDING
(
)
VIDEO MONO
L
AUDIO
R
CD
FRONT AV
MIN
MAX
MIN
MAX
CD REC
OFF ON S.ST
To use the microphone as a wired microphone
Follow steps 1 and 2 of “To use as a wired micro-
phone”. (੬ p.22)
1
Connect the microphone to the Player’s front panel
MIC1 or MIC2 terminal.
2
KEY CONTROL
NORMAL
UP
WIRELESS MIC
MIC 2
MIC 1
MIX VOL
SP
/
LP / EP
VCD
FRONT AV
MIN
MAX
MIN
MAX
CD REC
OFF ON S.ST
Notes:
• When using a wire-less microphone, the player may not
receive the sound volume if it is too far away from the
player.
• You can use up to 3 microphones (2 wired and 1 wireless)
at the same time with this Player.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke Features (cont'd)
VOCAL REPLACE button
KEY CONTROL buttons
3
DISC
DISC
DISC
3
2
1
/
POWER
2
STANDBY
3-DISC
1
SELECT
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
VHS CONTROL
DOWN
NORMAL
UP
WIRELESS MIC
MIC 2
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC 1
MASKING
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
VOCAL MASKING button
DIGITAL ECHO knob
MIC1/2 knobs
Vocal replace
MIC volume adjustment
Preparation
Turn the MIC 1 or MIC 2 knobs clockwise (level up) or
counterclockwise (level down) as desired.
When using a wire-less microphone, adjust with the MIC 2
knob.
This function is used for multiplex sound discs and tape.
Operation
1. Press the VOCAL REPLACE button during play or stop.
REPLACE will appear on the display window and
VO.REPLACE will appear on the television screen.
When you start singing, the vocal of the disc is re-
moved and your voice is inserted into the music.
Adjusting music key
Press the KEY CONTROL buttons ( or #) to change the
key in which the music plays. You can adjust the music on
the remote control unit also.
2. To cancel voice replacement, press the VOCAL RE-
PLACE button again.
To return the music to its original key, press the NORMAL
button. Remote control is not available for operation.
Vocal masking
Notes :
•
The degree the key has been sharpened or flattened is
displayed on the television screen.
When the song ends the key control will return to NORMAL
mode automatically.
Preparation
A digital audio CD and tape with vocals is used for KARAOKE.
•
Operation
1. Press the VOCAL MASKING button during play or stop.
The Player plays the music with low level vocals re-
corded on the disc. MASKING will appear on the dis-
play window and VO.MASKING will appear on the tele-
vision screen.
Adjusting echo effect
Turn the DIGITAL ECHO knob clockwise (level up) or
counterclockwise (level down) to adjust the echo effect as
desired.
2. To cancel vocal masking, press the VOCAL MASKING
button again.
ATTENTION
DIGITAL ECHO
Be sure to remove the microphone
Note when connecting the sound output to the input of a TV
or VCR:
If an excessively strong signal is given to a unit through a
microphone, for example when using Karaoke, it may cause
an adverse effect such as distorted sound. Lower the
sound volume using the microphone control.
MIN
MAX
Karaoke etiquette
Be aware of your neighbors when enjoying karaoke music.
Particularly late at night, the sound you enjoy may reach
your neighbors more than you expect. Common sense and
courtesy are always appreciated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing to/from another recorder
Editing from a camcorder
Player
Recorder
3
DISC
DISC
DISC
3
2
1
/
POWER
2
STANDBY
3-DISC
TRIPLE TRAY
1
SELECT
KARAOKE NORMALPBC OFF
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
OUT1
OUT2
VOCAL
REPLACE
VIDEO
INTRO
WIRELESS MIC ANT.
PAL
NTSC
VOCAL
STILL
NEXT
MIC
1
MIC
2
MASKING
RETURN
AUDIO
AUDIO
R
L
DIGITAL ECHO
MIX VOL
/
NT8C3.58
MPX
PREV
SP
/
LP EP
/
LIVE RECORDING
NTSC
VIDEO CD
ON PAL TV NTSC4.43
(
VIDEO MONO
)
L
AUDIO
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
VCD FRONT AV
OFF ON S.ST
GRAPHICS
MIN
MAX
MIN
MAX
FREQ
ADJUST
VCD NUMBER
CD REC
COMPACT
SPATIALIZER
VIDEO
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
Audio/Video signals
AUDIO OUT
Audio/Video signals
VIDEO OUT
Player
Recorder
3
2
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3-DISC
1
SELECT
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
MASKING
STILL
MIC
1
MIC
2
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
NEXT
SP
/
LP / EP
LIVE RECORDI
(MONO) AUDIO
VIDEO CD
L
R
NTSC/PAL CONVERTIBILITY
MIN
MAX
VCD FRONT AV
OFF ON S.ST
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
Camcorder
Preparation
Preparation
Connect the player’s AUDIO and VIDEO OUT connectors to
the recorder’s AUDIO and VIDEO IN connectors.
Connect the camcorder’s AUDIO and VIDEO OUT connectors
to the recorder’s AUDIO and VIDEO IN connectors.
Select the recorder’s external input mode.
Ⅵ When this unit is beside the recorder, there is no need
Put the camcorder in the Play mode.
1
1
for any operations.
Put the recorder in the Record mode.
2
Put the player in the Play mode.
2
3
Put the recorder in the Recorder mode.
Important:
Ⅵ To edit, both the player and the recorder must be of the
same colour system. Set this unit's Colour system
switch to select the appropriate colour system.
Notes:
• NTSC tapes being played back in the NTSC PLAYBACK
ON PAL TV mode cannot be dubbed to another recorder.
• When you dub an NTSC tape using this unit as the play-
back deck, select NTSC 3.58 (or 4.43) with the Colour
System Output switch.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing (cont'd)
CD Recording
This function dubs the audio of a CD onto a video tape by
a simple procedure.
MODE switch
DISC1 through 3 buttons
3
2
1
DISC
3
2
1
/
POWER
DISC
DISC
STANDBY
3-DISC
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
SELECT
DOWN
UP
WIRELESS MIC
MIC 2
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
MASKING
STILL
NEXT
MIC 1
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
SELECT button
CD REC button
Preparation
• Set the MODE switch of the Player either to “PBC OFF” or
“KARAOKE”.
• Set the MIX VOL knob on the player's front panel to the
center or VCD position.
Operation
Load a cassette.
Ⅵ Insert the cassette to be recorded on into the Player.
Press the 3 SELECT button or one of the DISC 1 to 3
1
4
5
buttons of the CD player.
Ⅵ The CD player starts playback, the Video cassette
player (VCP) starts recording, and the audio of the CD
is recorded onto the video tape.
Ⅵ The audio of the CD are output at the monitor TV.
Ⅵ Switching the CD player to stop or pause mode during
dubbing puts the VCR in record-pause mode. To re-
sume dubbing, play the track to be dubbed.
Place the disc to be played on the disc tray of the
Player.
2
Press the CD REC button of the Player.
Ⅵ The lamp in the CD REC button lights up and the VCR
enters the record-pause mode.
Ⅵ ¶8 appears in the display panel of the Player.
3
Press the CD REC button to stop CD recording.
Ⅵ The lamp in the CD REC button turns off and both the
CD player and the VCP stop.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing (cont'd)
Live recording
This is a function which records both the singing style
and the Video CD sound simultaneously with the video
tape.
The images from the Video
CD and the mixed sounds
from the Video CD, MIC, and
camcorder are output.
3
2
1
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3-DISC
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
SELECT
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC
1
MIC
2
MASKING
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
Video/Audio
signals
Camcorder
SELECT button
DISC 1-3 buttons
3
2
DISC
DISC
DISC
3
2
1
/
POWER
STANDBY
3-DISC
1
SELECT
KARAOKE NORMALPBC OFF
TRIPLE TRAY
KEY CONTROL
NORMAL
VHS CONTROL
DOWN
UP
WIRELESS MIC
VOCAL
REPLACE
VIDEO
INTRO
PAL
NTSC
VOCAL
STILL
NEXT
MIC
1
MIC
2
MASKING
RETURN
DIGITAL ECHO
MIX VOL
/
MPX
PREV
SP
/
LP / EP
LIVE RECORDING
VIDEO CD
(
)
VIDEO MONO
L
AUDIO
R
NTSC/PAL COMPATIBILITY
MIN
MAX
VCD
FRONT AV
GRAPHICS
MIN
MAX
MIN
MAX
VCD NUMBER
CD REC
OFF ON S.ST
COMPACT
SPATIALIZER
VHS . VideoCD COMBO HR-VCD1
DIGITAL VIDEO
MODE switch
MIX VOL knob
CD REC button
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing (cont'd)
Live recording
Press the CD REC button of the Player.
Ⅵ The lamp in the CD REC button lights up and the VCR
enters the record-pause mode.
Ⅵ ¶8 appears in the display panel of the Player.
Preparation
6
7
Set the MODE switch of the Player either to “PBC OFF” or
“KARAOKE”.
Operation
Connect the equipment as shown in the illustration on
the left.
1
Press the 3 SELECT button or one of the DISC 1 to 3
buttons of the Video CD player.
Ⅵ As the Video CD is played, the Video cassette player
(VCP) begins to record the images from the camcorder
togetherwiththemixedsoundsfromtheVideoCD, MIC,
and camcorder.
Load a cassette.
Ⅵ Insert the cassette to be recorded in the Player.
2
Ⅵ The images from the Video CD together with the mixed
Place the disc to be played on the disc tray of the
Player.
sounds are output to the TV.
3
Ⅵ Switching the Video CD player to stop or pause mode
during recording puts the VCP in record-pause mode.
To resume recording, play the track to be recorded.
Shoot the image to be recorded with the camcorder.
Ⅵ For the operating procedure of the camcorder, refer to
4
the instruction manual.
Press the CD REC button to stop live recording.
Ⅵ The lamp in the CD REC button turns off and both the
8
Video CD player and the VCP stop.
Adjust the MIX VOL knob of the Player to the desired
level.
5
MIX VOL
VCD
FRONT AV
Sound from the
Camcorder
(External input)
Mixed sounds
from the Video CD
and MIC
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptoms
Check point
Ⅵ Is the power cord disconnected?
No power is applied to the Player.
– Connect it.
Remote control does not function.
Ⅵ Are the batteries discharged?
– Replace with new ones.
Disc tray does not come out when OPEN/
CLOSE button is pressed.
Ⅵ Is the power cord disconnected?
– Connect it.
Sound is distorted or noise is generated.
Image is garbled.
Ⅵ Is the disc dirty?
– Wipe off the disc surface with a soft cloth.
Ⅵ Is the correctly connected?
Sound is intermittent.
Image is garbled.
Ⅵ Is the disc dirty?
– Wipe the disc surface with a soft cloth. ( ੬ p.4)
Ⅵ Is the disc scratched?
Ⅵ Is the disc warped?
– Replace the disc with a new one.
No image is displayed on the monitor.
Noise appears during visual search.
Ⅵ Is the monitor set to the AV mode?
– Set it to the AV mode.
Ⅵ This is normal.
Noise appears during normal or slow-motion
playback.
Ⅵ Is the automatic tracking mode engaged?
– Try manual tracking. ( ੬ p.19)
No sound from the microphone is heard.
Recording does not function.
Ⅵ Is the microphone volume adjusted at the lowest level? ( ੬ p.25)
Ⅵ Is a cassette loaded?
Ⅵ Is the safety tab on the cassette removed?
– Reseal the slot with adhesive tape.
Tape-to-tape editing or camera recording is not
possible.
Ⅵ Is the camcorder or another video recorder correctly connected?
Ⅵ Are all necessary power switch turned ON?
Whistling or howling is heard from TV during
camera recording.
Ⅵ Move camcorder or camera’s microphone away from TV or reduce
TV sound volume.
The Player does not function properly.
Ⅵ Microcomputer malfunction. Disconnect the power plug from the
AC outlet and then re-insert it.
The microcomputer will be reset to its initial mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
AUDIO
Power requirements
Frequency response .......... 70 Hz to 10,000 Hz (Normal)
20 Hz to 20,000 Hz (Hi-Fi)
Input ................................... –8 dBs/50 k ohms, unbalanced
Output ................................ –6 dBs/1 k ohms, unbalanced
MIC input............................ –56 dBs/50 k ohms, unbalanced
Rating ........................... AC 110 – 240 V, 50/60 Hz
Operating...................... AC 90 – 260 V, 50/60 Hz
Power consumption ............ 25 W
Temperature
Operating...................... 5°C to 40°C
Storage ......................... –20°C to 60°C
Dimensions (W x H x D)..... 460
ן 135 ן 341 (mm) Weight ................................ 7.5 kg
ACCESSORIES
Provided accessories
Remote control unit ........................................................... 1
“AA/UM-3” battery ............................................................. 4
Audio/Video cable ............................................................. 1
Microphone ....................................................................... 1
FREQ. adjust screwdriver.............................................. 1
Connector cable ................................................................ 1
Antenna cable ................................................................... 1
FM feeder cable ................................................................ 1
VIDEO CD
Playback disc ..................... Video CD (with/without Playback
Control function)
CD Graphics
Digital Audio CD
Total harmonic distortion .... Less than 0.015% (1 kHz)
Signal-to-noise ratio ........... More than 90 dB
Frequency response .......... 20 Hz to 20,000 Hz
VIDEO
Format ................................ VHS Standard
Recording/Playback
• Design and specifications subject to change without notice.
system ................................ DA-4 (Double Azimuth) head
herical scan system
Recording (line input) ......... PAL, SECAM (MESECAM tape)
NTSC 3.58, NTSC 4.43
Playback (line output)......... PAL, SECAM (MESECAM tape)
NTSC 3.58, NTSC 4.43
Simulated PAL (NTSC tape)
Signal-to-noise ratio ........... More than 45 dB
Horizontal resolution .......... More than 250 lines (PAL/
MESECAM)
More than 220 lines (NTSC)
Input ................................... 0.5 - 2.0 Vp-p/75 ohms,
unbalanced
Output ................................ 1.0 Vp-p/75 ohms, unbalanced
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
Printed In Japan
0897 MNV SW YP
C
COPYRIGHT 1997 VICTOR COMPANY OF JAPAN, LTD.
Download from Www.Somanuals.com. All Manuals Search And Download.
*
*
|