COMPACT COMPONENT SYSTEM
COMPACT DISC PLAYER
XL-Z132BK/XL-Z232BK
XL-Z132BK
XL-Z132 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY / PAUSE
POWER
/
1
6
2
7
3
8
4
9
5
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
1
BIT
P
E
M
D
D
CONVERTER
XL-Z232BK
CANCEL RANDOM
PROGRAM
OPEN
/
1
4
8
2
5
9
3
6
CLOSE
7
'
10
+10
XL-Z232 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY PAUSE
/
SEARCH
AUTO SEARCH
INDEX
/
CHECK
POWER
/
REPEAT DISPLAY
ALL
/
1
MODE
1
6
2
7
3
8
4
9
5
COMPACT
DIGITAL AUDIO
RM-SX230EU REMOTE CONTROL
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
1
BIT
P
E
M
D
D
CONVERTER
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0205-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE : 1-800-537-5722
Dear customer:
In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair
is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental
United States, Call 1-800-537-5722 for your authorized servicer. Remember to retain you Bill of Sale for Warranty Service.
—JVC
JVC SERVICE & ENGINEERING
COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
FACTORY SERVICE CENTER LOCATIONS
107 Little Falls Road
Fairfield, NJ 07004-2105
(973) 808-9279
1500 Lakes Parkway
Lawrenceville, GA 30243-5857
(770) 339-2522
705 Enterprise Street
Aurora, IL 60504-8149
(630) 851-7855
5665 Corporate Avenue
Cypress, CA 90630-0024
(714) 229-8011
2969 Mapunapuna Place
Honolulu, HI 96819-2040
(808) 833-5828
10700 Hammerly, Suite 110
Houston, TX 77043
(713) 935-9331
13 Cummings Park
Woburn, MA 01801
(781) 376-9100
8192 State Road 84
Davie, FL 33324
(954) 472-1960
890 Dubuque Avenue
South San Francisco, CA 94080-1804
(650) 871-2666
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of
the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The
JVC service and engineering organization stands behind our products.
NATIONAL HEADQUARTERS
JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
If you ship the product • • •
Don’t service it yourself.
Pack your JVC unit in the original carton or one of equivalent
size and strength. Enclose, with the unit, a letter stating the
problem or symptom that exists and also a copy of the
CAUTION
receiptorbillofsaleyoureceivedwhenyoupurchasedyour
JVC unit. Print your home return address on the outside
and the inside of the carton. Send to the appropriate JVC
Factory Service Center as listed above.
To prevent electrical shock, do not open the cabinet. No user
serviceable parts inside.
Refer servicing to qualified service personnel.
ACCESSORIES
To purchase accessories for your JVC product, you may contact your local JVC Dealer.
Or from the 48 Continental United States call toll free : 800-882-2345
BT-51001-3
(1098)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY AUDIO-1
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail
purchase for the period as shown below. (“The Warranty Period.”)
PARTS
LABOR
1YR
1YR
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN
COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such
repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.
Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be
brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and
above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800)537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of
your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location
of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to
render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has
been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied
warranty last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRO DUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this
information for future reference.
Model No.:
Serial No.:
Purchase date:
Name of dealer:
Download from Www.Somanuals.com. All Manuals Search And Download.
We would like to thank you for purchasing one of our JVC
products.
Before connecting this unit to the wall outlet, please read
the instructions carefully to ensure that you obtain the
best possible performance.
Table of contents
INTRODUCTION................................................ 1
Precautions .................................................................1
About this manual .......................................................1
Names of buttons........................................................2
If you have any questions, please consult your JVC
dealer.
BEFORE USING FOR THE FIRST TIME .......... 4
Installing the unit .........................................................4
Connecting to the analog output jacks .......................4
Connecting to the digital output jack ..........................4
Supplying the power .................................................. 5
To connect the AC power cord of the main unit ............ 5
Installing the batteries (XL-232BK only)......................6
To install the batteries in the remote control unit ........... 6
COMPU LINK connection...................................................... 6
BASIC OPERATIONS ....................................... 7
Basic functions for disc playback...............................7
Turning on the power of this unit .................................... 7
Loading a disc in the disc tray ....................................... 7
Remote control operation (XL-232BK Only) ................... 7
Playing a disc ................................................................. 8
Stopping playback ......................................................... 8
Locating a point to start playback ..............................8
Skipping to a desired track ............................................ 8
Skipping to a desired index (XL-232BK Only)
(for a disc with INDEX) ................................................... 8
Searching for a desired section ..................................... 9
Specifying a desired track ............................................. 9
Displaying the time .....................................................9
Switching the time display on XL-Z232BK ..................... 9
Displaying the time on XL-Z132BK ................................ 9
VARIOUS PLAYBACK PATTERNS ............... 10
Playing tracks in a desired order .............................. 10
Playing tracks in a random order.............................. 10
Playing repeatedly .................................................... 11
Repeating whole disc................................................... 11
Repeating one track ..................................................... 11
GENERAL INFORMATIONS ........................... 12
COMPU LINK remote control system ....................... 12
Care and handling .................................................... 13
Troubleshooting ........................................................ 14
Specifications............................................................ 14
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Precautions
About this manual
This manual covers the operating instructions for the compact disc
player XL-Z132BK and XL-Z232BK.
There are several functions which require separate instructions for
eachmodel. Pleasecheckthemodelnumberstatedonthecartonbox,
and follow the descriptions applicable to your unit.
Load compact disc only
Never insert anything other than a compact disc into any part of the
player.
If a problem persists
If something goes wrong, turn off the power immediately. If the same
problem reoccurs when the power is turned on once more, turn off the
power again and consult your JVC dealer.
This manual is organized as follows:
The first part, “INTRODUCTION”, gives you the precautions when
using this unit, and shows you the names of buttons on the main unit
and the remote control unit.
Handling the power cord
When unplugging from the wall socket, always pull the plug body,
never the power cable.
The second part, “BEFORE USING FOR THE FIRST TIME”, tells you
what kind of operations you should do before playing a disc. This part
describes where to place the unit for best results, how to install
batteries in the remote control unit and how to connect this unit to the
amplifier/receiver and other components.
Volume settings
A CD player has almost zero background noise. Because of this, the
technique of listening to the background level and then setting the
volume before the music starts, as used with analog turntables or tape
decks, cannot be used. If you raise the volume level too high, speaker
damage may result.
The third part, “BASIC OPERATIONS”, describes how to load a disc,
and convenient basic functions for playing disc.
Condensation
The CD player uses optical components. If it is moved from a cold
location to a warm one, or is used in a room subject to excessive
humidity or where a fire has just been lit, condensation could form on
the optical components.
This may prevent the laser beam from being properly transmitted and
thus causes noise or even a malfunction.
If condensation has formed and the CD player does not function
correctly, we recommend that you leave it turned on for an hour or two.
If at the end of this time the CD player still does not function properly,
please consult your JVC dealer.
The fourth part, “VARIOUS PLAYBACK PATTERNS”, describes vari-
ous functions for playing disc, and convenient functions for recording.
The fifth part, “GENERAL INFORMATIONS”, describes the COMPU
LINK remote control system which facilitates various operations be-
tween JVC components, and explains how to take care of discs.
This part also includes “Troubleshooting” which tells you how to check
the unit when a malfunction occurs, and the technical informations
regarding this unit.
Transporting the unit
When carrying this unit, it is best to avoid either tilting it or turning it
upside-down. Where you cannot avoid doing so, please remove the
disc first.
Using compact discs
Compact discs are made of plastic and can be easily damaged. If the
disc is dirty, scratched, warped or otherwise damaged, the digital
information may not be picked up correctly.
Applicable discs
This unit can only be used with compact discs bearing the mark below.
Never use discs of other types.
'
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Names of buttons
Main unit
4
¢AUTO SEARCH/CHECK buttons
22 33 SEARCH buttons
3/8 PLAY/PAUSE
POWER: POWER button
button
STANDBY
indicator
0 OPEN/CLOSE button
Disc tray
7 STOP/CLEAR
button
COMPACT DISC PLAYER
STANDBY
PLAY / PAUSE
OPEN
/
CLOSE
STOP/CLEAR
POWER
/
1
6
2
7
3
8
4
9
5
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
1 BIT P E M D D CONVERTER
remote sensor
Display window
(XL-Z232BK Only)
Numeric keypad
CANCEL button
REPEAT button
RANDOM button
random play back button
PROGRAM button
DIGITAL OUT
jack (optical)
AC power cord inlet
DIGITAL OUT
OPTICAL
COMPULINK-3
(SYNCHRO)
OUTPUT
AC IN
LEFT
RIGHT
COMPU LINK-3 (SYNCHRO) jacks
OUTPUT jacks
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control unit (XL-Z232BK only)
Remote control signal
transmitter
CANCEL button
RANDOM: random
playback button
CANCEL RANDOM
POWER
PROGRAM
PROGRAM button
POWER: POWER button
OPEN/CLOSE button
OPEN /
CLOSE
1
4
8
2
5
9
3
6
7
Numeric keypad
10
+10
8: Pause button
3: Play button
7: Stop button
SEARCH
AUTO SEARCH / CHECK
INDEX
1/¡ SEARCH buttons
REPEAT ALL/1 button
4/¢ AUTO SEARCH/CHECK buttons
ø/Ø INDEX buttons
REPEAT DISPLAY
ALL / 1
MODE
COMPACT
DISPLAY MODE:
switching time dis-
play button
DIGITAL AUDIO
RM-SX230U REMOTE CONTROL
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Connecting to the Digital
Output Jack
Installing the unit
Best location
It is possible to transmit a digital sound signal from this unit directly to
a MD recorder,etc.
Select a location which is level, dry and neither too cold nor too hot
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty
locations or any location subject to vibration.
Notes
÷
÷
Neverconnectthedigitaloutputcableexcepttothedigitalinputjack.
An optical digital cord (optional) is required to make this connection.
Refer to the instruction manual of the MD recorder, etc. for details.
There is a protective cap on the DIGITAL OUT jack (optical) . When
makingtheconnection, pulloffthiscapandstoreitcarefullyinasafe
place. Should you undo the connection, replace the cap on the jack.
If interference occurs
If this equipment is placed near a tuner or a radio receiver tuned to AM
frequencies, interference may occur. If this happens, we recommend
either that you move this unit as far away as possible from the tuner or
receiver or briefly turn off the power to this unit.
÷
MD recorder, etc.(optional)
OPTICAL
DIGITAL
OUT
Connecting to the Analog
Output Jacks
Optical digital cord (optional)
DIGITAL OUT
OPTICAL
COMPULINK-3
OUTPUT
SYNCHRO
AC IN
LEFT
RIGHT
Connecting to an amplifier or receiver allows you to listen to the sound
from the speakers.
Rear panel of this unit
Connect the OUTPUT jacks of this unit to the line input jacks of an
amplifier or receiver with the supplied audio cord.
Notes
÷
÷
÷
÷
Never connect the OUTPUT jacks to the PHONO jacks of the
amplifier or receiver. This may cause damage to the components.
Make sure that the same channels are connected between this unit
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.
Do not connect the power plug unless all connections are com-
pleted.
Connect the plugs firmly. Loose connections may cause noise or
malfunction.
Rear panel of this unit
DIGITAL OUT
OPTICAL
COMPULINK-3
SYNCHRO
OUTPUT
AC IN
LEFT
RIGHT
Amplifier or receiver
Audio cord
OUTPUT
LEFT
RIGHT
Speaker unit
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplying the power
To connect the AC power cord of the
main unit
The AC power cord is supplied separately and must be connected to
the unit.
Plug the AC power cord into the AC power cord inlet of this unit and
connect to the wall outlet after all connections are complete.
Note
When using the COMPU LINK Remote Control System, do not connect
the power cord to the SWITCHED AC OUTLET of an amplifier or
receiver.
AC power cord inlet
Rear panel of this unit
DIGITAL OUT
OPTICAL
COMPULINK-3
(SYNCHRO)
OUTPUT
AC IN
LEFT
RIGHT
Supplied AC power
cord
To the wall outlet
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
COMPU LINK connection
Installing the batteries
(XL-Z232BK Only)
JVC’s COMPU LINK Remote Control System provides unified control
over system components connected with COMPU LINK. Connecting
JVC audio components with the COMPU LINK jacks automatically
controls relative operations between components and facilitates vari-
ous operations. With the COMPU LINK connection to an amplifier or
receiver, you can operate XL-Z132BK/XL-Z232BK with the amplifier or
receiver’s remote control unit. Synchronized recording is also avail-
able with this feature.
To install the batteries in the remote
control unit
Before operating the remote control unit, install two batteries.
1. Remove the rear cover of the remote control unit by pressing
down and simultaneously pulling it backwards.
Connecting the COMPU LINK cord
The COMPU LINK-3 SYNCHRO jacks are used to output and input the
control signal for the COMPU LINK remote control system.
COMPULINK-compatibleproductsareprovidedwiththejacksmarked
COMPU LINK-1, COMPU LINK-2 or COMPU LINK-3, referring to the
COMPU LINK version. XL-Z132BK/XL-Z232BK is equipped with
COMPU LINK-3. You can connect XL-Z132BK/XL-Z232BK also to a
component with a lower COMPU LINK versions. But, in that case, only
the lower versions’ features will be available.
PlugthesuppliedCOMPULINKcordintotheCOMPULINK-3SYNCHRO
jack on the rear panel of XL-Z132BK/XL-Z232BK. Plug the other end
into the COMPU LINK jack of the other component. If there are two
COMPU LINK jacks, plug it into either of them.
2. Install batteries. Be sure that the batteries are installed with
correct polarity, (+) and (–).
Connect to the COMPU LINK-3 (SYNCHRO) jack of another com-
ponent eqipped with the Compu Link remote control system.
Rear panel of this unit
DIGITAL OUT
OPTICAL
COMPULINK-3
OUTPUT
AC IN
(SYNCHRO)
LEFT
RIGHT
3. Attach the rear cover by sliding it back into position.
Supplied COMPU LINK cord
Turntable
Cassette deck
Amplifier or receiver
Notes
Incorrect use of batteries can cause corrosion or damage. Note the
following points to lengthen battery life.
÷
÷
÷
Install batteries observing the correct polarity, (+) and (–).
Do not use new and old batteries simultaneously.
Batteries with similar shapes may have different voltage ratings. Be
sure to use the correct batteries.
÷
÷
Remove batteries from the remote control unit if it will not be used
for a long period of time.
Do not expose batteries to heat or flame.
Battery replacement
Service life of batteries depends on the condition of use; standard life
is about one year. When the batteries become weak, the operating
distance of the remote control unit becomes short . If this happens,
replace the batteries R03(UM-4)/AAA(24F) with new ones.
Note
÷
The lower the temperature, the shorter the battery life.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Basic functions for disc
playback
Loading a disc in the disc tray
Turning on the power of this unit
Use the 0 OPEN/CLOSE button to open and close the disc tray.
Press the POWER button to turn on this unit. The STANDBY
indicator is turned off and the display is turned on.
Remote control unit
(XL-Z232BK ONLY)
Main unit
Remote control unit
(XL-Z232BK ONLY)
Main unit
OPEN/CLOSE
OPEN/
CLOSE
STANDBY
POWER
0
POWER
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.
2. Place a disc on the disc tray according to the groove with its
label side up.
Press again to turn the power off and activate the standby mode. The
STANDBY indicator is lit.
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.
The power is automatically turned on also by;
÷
÷
Pressing the 0 OPEN/CLOSE button.
Pressing the 3 button on the remote control unit or the 3/8 PLAY/
PAUSE button on the main unit.
Note
÷
Whenloadingadiscinthedisctray, besuretoputthediscaccording
to the groove. Otherwise, the disc will be damaged when the disc
tray is closed, and the disc cannot be removed from the unit.
Notes
÷
A small amount of power (4 watts) is consumed even in the standby
mode.
Good
No Good
÷
Toturnthepoweroffcompletely,disconnectthepowercordfromthe
wall outlet.
Compact disc
Disc tray
Main unit
Remote control operation (XL-Z232BK Only)
Point the remote control unit towards the remote sensor and operate it
steadily and carefully. The remote control unit can be used within a
rangeofabout7meters(23feet)fromtheremotesensor, andatangles
of up to about 30 degrees.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Locating a point to start
playback
Skipping to a desired track
Playing a disc
Use the 4/¢ buttons.
Press the 3 button on the remote control unit or the 3/8 PLAY/
PAUSE button on the main unit.
Remote control unit
Main unit
(XL-Z232BK ONLY)
Main unit
Remote control unit
(XL-Z232BK ONLY)
AUTO SEARCH/CHECK
PLAY/PAUSE
4
¢
6
To skip back to the beginning of the track being played, tap the 4
button. Whenthebeginningofthetrackisreached, tappingthisbutton
again skips to the previous track.
The 3 indicator lights on the display and playback starts.
When no disc is loaded in the unit, the disc tray opens.
To skip to the next track, tap the ¢ button.
To stop playback temporarily, press the8 button on the remote control
unit or the 3/8 PLAY/PAUSE button on the main unit.
The 8 indicator lights on the display and playback stops temporarily.
To resume playback, press the 3 button on the remote control unit or
the 3/8 PLAY/PAUSE button on the main unit.
When using the 4
¢buttons on the main unit, tap them until the
desired track appears.
Skipping to a desired index (XL-Z232BK Only)
Stopping playback
(for a disc with INDEX)
Press the 7 button.
Use the ø/Ø INDEX buttons.
Main unit
Remote control unit
(XL-Z232BK ONLY)
Remote control unit
STOP/CLEAR
INDEX
ø
Ø
To skip back to the beginning of the index being played, tap the ø
INDEX button. When the beginning of the index is reached, tapping
this button again skips to the previous index.
To skip to the next index, tap the Ø INDEX button.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the time
Swithching the time display on XL-Z232BK
Searching for a desired section
Each time the DISPLAY MODE button is pressed, the time display
changes as the following.
Keep the 1/¡ SEARCH buttons on the remote control unit or
the 22/33 SEARCH buttons on the main unit pressed during
playback.
Remote control unit
DISPLAY
Remote control unit
(XL-Z232BK ONLY)
SEARCH
Main unit
1
¡
MO
EACH = EACH REMAIN = TOTAL
TOTAL REMAIN
=
The corresponding indicator lights in each time mode.
EACH: Shows the elapsed time of the track being played.
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing
played.
TOTAL: Shows the total playing time of the disc being played.
TOTALREMAIN:Showstheremainingplaybacktimeofthediscbeing
played.
Playback advances or reverses rapidly.
While the 1 button is kept pressed, playback rapidly reverses
toward the beginning of the track. While the ¡ button is kept
pressed, playback rapidly advances toward the end of the track.
When the desired section is reached, release the button. The player
resumes normal playback from that point.
Note
Two speeds are available for fast forward and fast backward.
Pressing and holding the button provides the faster speed.
Displaying the time on XL-Z132BK
When the disc is stopped, the XL-Z132BK has the following time
displays.
Specifying a desired track
EACH: Shows the elapsed time of the track being played.
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing
played.
To specify the desired track number, use the numeric keypad (1-
10, +10).
Remote control unit
Main unit
1
TOTAL: Shows the total playing time of the disc being played.
(XL-Z232BK ONLY)
1
4
8
2
5
9
3
2
7
3
8
4
9
5
6
10
+10
6
7
10
+10
The unit searches for the selected track and playback starts automati-
cally.
When selecting track number 10 or less, press the corresponding
numeric button. When selecting track number 11 or above, use the
[+10] button.
Example: To select track number 12, press [+10] and then [2].
To select track number 25, press [+10] twice and then [5].
To select track number 30, press [+10] twice and then [10].
Note
The track number which does not exist on the selected disc, cannot be
selected.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS PLAYBACK PATTERNS
Playing tracks in a
desired order
Playing tracks in a
random order
You can play only the favorite tracks in any desired order.
You can select and play tracks in a random order.
Selections are made so that each track in the disc is played only
once.
CANCEL
PROGRAM
RANDOM
main unit
Numeric keypad
3 PLAY
RANDOM
PLAY
3
PROGRAM
main unit
XL-Z232 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY / PAUSE
POWER
/
1. Press the RANDOM button so that the "RANDOM" indicator
lights on the display.
1
6
2
7
3
8
4
9
5
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
1
BIT
P
E
M
D
D
CONVERTER
÷
To skip to the track to be played next, press the ¢ button.
Numeric keypad
To exit random playback
CANCEL
Press the stop button,and the random mode is cancelled.
1. In stop mode, press the PRAGRAM button so that "PRGM"
lights on the display.
2. Select the track number with the numeric keypad.
Refer to “Specifying a desired track” on page 9 for entering the
track number.
The selected track number is programmed and the following
display appears.
Display shows the track
number selected for step 1.
STEP
TOTAL
PRGM
9
÷
If you want to cancel the displayed program step, press the
CANCEL button and then enter the new track number.
3. Repeat step 2 for other tracks to be programmed.
You can program up to 32 tracks.
4. Start playback by pressing the 3 button.
The programmed tracks are played in the programmed order.
÷
÷
You can skip to a desired program step with the 4 or ¢ button.
You can add tracks in the program during the playback.
To check the program contents
Press the 4 or ¢ button during stop mode. Each time the 4 or
¢ button is pressed, the program contents are displayed in the
programmed order or the reverse order.
To clear the entire program
In stop mode, press the 7 STOP/CLEAR button on the main unit. The
program contents will be cleared, however, the program mode is not
canceled.
To exit program mode
Press the PROGRAM button again, and the program mode is can-
celled.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing repeatedly
You can repeatedly play the whole disc or one track.
It is also possible to utilize this function in combination with
random/program playback function.
main unit
REPEAT
REPEAT ALL/1
Repeating whole disc
Press the REPEAT (ALL/1) button so that the REPEAT indicator
lights on the display.
All tracks are played repeatedly.
Repeating one track
Press the REPEAT (ALL/1) button so that the REPEAT 1 indicator
lights on the display.
The displayed track is played repeatedly.
To cancel repeat mode
Press the REPEAT (ALL/1) button so that the REPEAT and REPEAT 1
indicators go out.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
COMPU LINK remote
control system
The COMPU LINK Remote Control System controls relative
operations between components automatically and facilitates
various operations.
Automatic source selection
When the supplied COMPU LINK cord is utilized to connect this unit to
others equipped with COMPU LINK jacks, switching-in of each system
component can be performed with a single touch on the source
selector button located on a JVC amplifier or receiver.
Whenselectioniscarriedoutinthismanner, thecorrespondingunitwill
automatically start operation.
This is a system originated and developed by JVC for facilitating
various system operations.
Upon pressing of the play button, the source selector of the amplifier
or receiver changes automatically. When a new unit is switched in, the
previously selected component stops operation within five seconds.
The following is a brief explanation of this system:
Synchronized recording
Synchronized recording refers to the process in which a JVC cassette
deck starts recording, synchronized with this unit. Synchronized
recording is carried out as follows:
1. Set the cassette deck to the recording pause mode in accordance
with its instructions.
2. To record only certain tracks, program the tracks in any order, as
desired.
3. Press the 3/8 PLAY/ PAUSE button on the front panel of this unit.
The cassette deck automatically starts recording, synchronized
with this unit.
Notes
÷
÷
÷
÷
Synchronized recording stops automatically when this unit stops
playback.
To cancel synchronized recording, press the 7STOP button of this
unit or the cassette deck.
To properly operate the synchronized recording, the buttons/con-
trols other than POWER, 7 STOP and OPEN do not function.
If the recording pause mode is set on the cassette deck by pressing
the 8 PAUSE button after pressing the ¶ REC and 3 PLAY buttons
simultaneously, synchronized recording is not possible. For details,
refer to the instructions for the cassette deck.
Automatic power on/off function
This function is to control the power on/off of the receiver/amplifier or
this unit respectively as the following.
÷
÷
When this unit enters playback mode, the power of the receiver or
amplifier is turned on.
When the source selector of the receiver/amplifier is set to CD
function mode, the power of this unit is turned on.
Notes
÷
Abnormaloperationmayresultifthepowersupplyofthecomponent(s)
is interrupted. If this happens, you must start over again.
Ensure that the COMPU LINK jacks of the each component are
connected with the supplied COMPU LINK cord. Also, be sure to
fully read the instructions for each component.
÷
÷
When the power of the amplifier or receiver is switched off, this unit
is also turned off automatically.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and handling
Maintenance of discs
How to handle CDs
When there are fingerprints or other dirt adhering to a disc, wipe the
disc with a soft, dry cloth with a movement going from the inside
outwards.
If difficult to clean, wipe the disc with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
When handling compact discs, do not touch the surface of the disc (re-
flective silver side - the side without the label).
Since compact discs are made of plastic, they are easily damaged. If
the disc gets dirty, dusty, scratched or warped, the sound will not be
picked up correctly and, in addition, such discs may cause the CD
player to malfunction.
Even on label side
Do not damage the label side, stick paper to or use any adhesive on
this surface.
Storage
Make sure that discs are kept in their cases. If discs are piled one on
top of another without their protective cases, they can be damaged.
Do not put discs in any location where they can be exposed to direct
sunlight - or in any place where humidity or temperature is high. Avoid
leaving discs in your car!
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
Symptom
Possible cause
Remedy
The unit is not operative.
Power plug is disconnected from the AC
outlet.
Connect the plug to an AC outlet.
The AC power cord plug is disconnected
from the AC power cord inlet of this unit.
Connect the plug to an AC power
cord inlet.
Disc is not loaded.
Load a disc in the disc tray.
Replace both batteries.
Remove the obstacle.
The remote control unit does not function.
(XL-Z232BK only)
Batteries are exhausted.
There is an obstacle between remote control
unit and the remote sensor of the main unit.
Direct sunlight shines on the remote sensor
of the main unit.
Shade the unit from the direct sunlight.
Disc is inserted upside down.
Disc is not loaded in the correct position.
Moisture is condensed inside the unit.
Disc is dirty.
Load a disc with its label-side up in the
disc tray.
Playback is not possible.
Load the disc according to the groove of
the disc tray.
Leave the unit turned on until the mois-
ture evaporates.
Wipe off the disc surface with a soft
cloth.
The reproduced sound includes noise.
The sound is intermittent.
Disc is warped.
Replace the disc with a new one.
Replace the disc with a new one.
Disc is scratched.
Audio performance
Frequency response:
Dynamic range:
2 Hz to 20,000 Hz (±1 dB)
More than 98 dB (at 1 kHz)
More than 106 dB
Specifications
Signal to noise ratio:
Total harmonic distortion: Less than 0.0025% (at 1 kHz)
Channel separation:
Wow and flutter:
Output level
More than 94 dB (at 1 kHz)
Less than measurable limit
2.0Vrms (at 10 kohms)
General
System:
Compact disc player
Signal detection system: Non-contact optical system
Accessories
Sampling frequency:
Power requirements
Power consumption:
44.1 kHz
Remote control unit (RM-SX230U)(XL-Z232BK only) ................ 1
Battery R03(UM-4)/AAA(24F) (XL-Z232BK only) ....................... 2
Audio cord ................................................................................. 1
COMPU LINK cord .................................................................... 1
AC POWER cord ....................................................................... 1
AC120V , 60Hz
10 watts (POWER ON)
4 watts (STANDBY)
435 x 101 x 281 mm
17-3/16 x 4 x 11-1/8 inches
3.3 kg (10.8 lbs)
Dimensions (W x H x D):
Mass:
Design and specifications subject to change without notice.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
0199AOMOKGJSC
J
C
EN
V
Download from Www.Somanuals.com. All Manuals Search And Download.
|