ENGLISH
FRANÇAIS
ESPAÑOL
CU-VD40U
DVD Burner
INSTRUCTIONS
Graveur de DVD
MANUEL D’UTILISATION
Grabador de DVD
MANUAL DE INSTRUCCIONES
For Customer Use:
Enter the Model No. and Serial
No. (located on the bottom of the
burner) below. Retain this
information for future reference.
Model No.
Serial No.
LYT1752-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions for the Burner
Cleaning Procedure
EN
FR
ES
Be sure to observe the following precautions. Failing to do so
may result in electric shock, fire, injury, or malfunction.
● Do not disassemble, dismantle, or modify the equipment.
Requests for repair and inspection should be made to the
dealer.
IMPORTANT:
● Be sure to unplug the burner before beginning cleaning.
● Do not use liquid or aerosol cleaners.
● Ensure that no moisture or liquid comes into contact with the
drive during cleaning.
Exterior of the Burner:
Wipe dirt off with a dry cloth.
Disc Tray:
Wipe off dirt with a soft dry
cloth.
● Do not insert metal or combustible objects or pour water or
other liquids inside the burner.
● Turn off the power when connecting equipment.
● Remove the plug when the burner will not be used for a
prolonged time or prior to cleaning (electricity flows through
the equipment even when the power is off).
● Do not block the ventilation holes of the burner.
● Do not use where there is condensation. Suddenly carrying
the burner from a cold location to a hot location may result in
the formation of drops, which may cause a malfunction or
failure.
Disc:
Gently wipe from the inner edge
to the outer edge with a soft
cloth.
Storage:
● Do not cause the burner to vibrate when discs are in.
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Safety Precautions for Accessories
● When using the AC adapter, the power cord, and the USB
cable, be sure to observe the following precautions. Failing to
do so may result in electric shock, fire, injury, or malfunction.
• Do not insert or remove the plug when your hands are wet.
• Fully insert the plug into the outlet.
Region Codes
Region codes are numbers for restricting DVD video playback.
The world is separated into six regions and each region is
identified by a number. If the number for a disc does not match
the number for the player, the disc cannot be played on the
player. (The initial region code is indicated on the label on the
bottom of the burner.)
• Keep dust and metal objects away from the plug.
• Do not damage the cord.
• Place the cord where it will not trip someone up.
• Do not use when thunder can be heard.
• Do not dismantle.
• Do not use for any product other than this one.
● Do not play the provided CD-ROM with an audio player. Doing
so may damage the circuits or speakers.
Disclaimer
JVC accepts no liability whatsoever for loss of data resulting
from inappropriate connections or handling.
Safety Precautions for Discs
Do not use the following discs.
● Cracked discs
Copyrights
Duplicating copyright protected material, for other than personal
use, without the permission of the copyright holder is prohibited
by copyright law.
● Deeply scratched discs
Installation
Do not install in any of the following locations.
● Humid location
Registered Trademarks and
Trademarks
● Location of 60 °C or above
● Location subject to direct sunlight
● Location where overheating is likely
● Dusty or smoky locations
● Locations subject to oily smoke or steam such as a kitchen
counter or beside a humidifier
● Unstable location
● Bathroom
● Dusty places
● Slanted location
®
● Windows is either registered trademark or trademark of
Microsoft Corporation in the United States and/or other
countries.
● Macintosh and Mac OS are trademarks of Apple Computer,
Inc., registered in the United States and other countries.
● Pentium is a registered trademark of Intel Corporation in the
United States.
● Manufactured under licence from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories.
● HDMI, HDMI logo and high definition multimedia interface are
trademarks or registered trademarks of HDMI Licensing LCC.
● Other company and product names mentioned herein are
registered trademarks and/or trademarks of their respective
holders.
ATTENTION:
On placing the unit:
Some TVs or other appliances generate strong magnetic fields. Do
not place such appliances on top of the unit as it may cause picture
disturbance.
When moving the product:
Press C/B to turn off the power, and wait at least 30 seconds before
unplugging the power cord. Then, wait at least 2 minutes before
moving the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy High Definition Images Copied to DVDs!
Copying to DVD
A Connect.
Audio/Video cable
(provided)
(provided)
B Select the desired copy method.
The following 6 methods of copying are available.
GZ-HD7U
instruction manual
Methods of copying
Types of copy operation
Copy all images shot.
Copy only newly shot images.
0Page 48
0Page 48
0Page 49
0Page 49
0Page 49
0Page 49
Copy all
(NORMAL BACK-UP)
Search and copy by date.
Search and copy by scenes.
Search and copy by events.
Copy using playlists.
Copy only favorite scenes
(SELECT BACK-UP)
z The date for videos created from playlists will be the same as the date the DVD is created.
C Copy to DVD.
z For details on finalizing, refer to
pages 48 to 50 of the GZ-HD7U
instruction manual.
DVD
5
3
DVD(DL)
z Time taken for copying will be
long if there are a large number
of files.
EXECUTE AND FINALIZE
CANCEL
SELECT SET
TOP
Select and set on “EXECUTE AND FINALIZE”.
z Additional recordings are not possible after finalizing.
To add new recordings
z Select and set on “EXECUTE” instead of “EXECUTE AND FINALIZE”.
z Discs that are not finalized cannot be played back on PC or this burner.
To play back, connect as shown in the diagram above, and refer to pages 48 to 50 of the GZ-HD7U instruction manual.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Viewing Images Copied to DVD on the TV
A Connect.
Audio/Video cable
(provided)
A Disconnect the USB cable and turn off this burner.
B Connect the burner to the TV.
z To view high definition images, connect using an optional HDMI cable or component video cable.
B Play back.
A Turn on the burner.
z Confirm that the power lamp is lighted in orange. If the lamp is not lighted in orange, disconnect the USB cable then turn
off and on the power again.
Approx. 20 seconds later
B Press the open/close (M) button to eject the tray.
C Insert a finalized disc.
D Press the open/close (M) button to close the tray.
z The following screen appears.
PLAY VIDEO
PLAY IMAGE
E Play back.
z For details on playback, refer to page 15 of this instruction manual.
Before erasing data from GZ-HD7U
.................................................................................................................................................................
z Confirm that the data has been copied to DVD before erasing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
DVD Burner
Safety Precautions.....................................................................2
CU-VD40U
Enjoy High Definition Images Copied to DVDs! .........................4
Copying to DVD............................................................................................ 4
ENGLISH
Getting Started...........................................................................7
Accessories.................................................................................................. 7
Placing the Burner........................................................................................ 7
Inserting a Disc............................................................................................. 7
Preparing the Remote Control...................................................................... 7
Connecting to TV .......................................................................9
Connecting to a TV with DVI Input Terminal............................................... 10
To Connect ................................................................................................. 12
Computers That Can Be Used ................................................................... 12
Installing CyberLink Power2Go 5.5 Lite ..................................................... 13
Viewing Videos Saved from High Definition Everio Camera ...................... 15
Viewing Still Images Saved from High Definition Everio Camera............... 17
Viewing High Quality Images ...................................................19
Changing the Settings..............................................................20
Menu Operation Procedures ...................................................................... 20
Setting Items And Contents........................................................................ 21
Troubleshooting .......................................................................23
Error Messages........................................................................24
Specifications...........................................................................25
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Getting Started
Accessories
Power cord
USB cable
DVD-ROM
Audio/Video
cable
AC adapter
(AP-V400U)
Stand
Remote control
(RM-V41U)
Recording disc (DVD-R DL)
(For use with high definition Everio Camera.
Cannot be used with an Everio Camera.)
Lithium Battery (CR2025)
Pre-installed in the remote
control unit.
CAUTION:
z Do not use the provided AC adapter and power cord with other devices. In addition, do not use AC adapter, power cord and
USB cable other than those provided with this burner. Doing so may result in electric shock or fire.
Placing the Burner
„ Horizontal orientation
Bottom surface
z Take note of the top and bottom of the burner and
place it in the horizontal orientation.
Stand (provided)
„ Vertical orientation
z When using in the vertical orientation, align the vent of
the burner with that of the provided stand, then place
and fix the burner securely on the stand.
Vent
Inserting a Disc
When handling a disc, be sure not to touch the playback/recording side of the disc.
Use only the [M] button on the burner or the remote control to eject the disc tray. If you open the tray manually,
there is a risk of the disc dropping out or getting caught.
„ Horizontal orientation
„ Vertical orientation
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
„ To Reinsert the Battery
Lithium Battery
(CR2025)
z Pull out the battery holder by pressing the lock tab.
Lock Tab
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Parts and Controls
Front
.................................................................................................................................................................
H
A Open/Close Button (M)
B Power Button (C/B)
C Power Lamp
Green light:
When connected to Everio camera or
PC.
Orange light:
During playback.
D Play/Pause Button (I/W)
E Stop Button (o)
F Previous Button (S)
G Next Button (T)
H Disc Tray
A B C D E F G
Rear
.................................................................................................................................................................
E
A DC Connector
B USB Connector
C
C Cooling Fan
COMPONENT VIDEO OUT
PR
PB
Y
D HDMI Terminal
E COMPONENT VIDEO OUT Connectors
F AUDIO output Connectors
G VIDEO output Connector
DC
R
L
VIDEO
AUDIO
B
D
F
G
A
Remote control
.................................................................................................................................................................
J
A OPEN/CLOSE Button (M)
B SET UP Button
C TOP MENU Button
D Selection keys (
E STOP Button (o)
F PREVIOUS Button (S)
G REV Button (O)
H FWD Button (N)
I PLAY/PAUSE Button (I/W)
J TOOL Button
K RESOLUTION Button
L ON SCREEN Button
M MENU Button
N ENTER Button
O RETURN Button
P Skip Button (v)
Q Replay Button (w)
R NEXT Button (T)
K
L
M
N
A
B
C
/
/ / )
D
E
F
O
P
Q
R
G
H
I
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Connecting to TV
To view high definition images, connect using an optional HDMI cable or component video cable.
Connecting to a TV with HDMI Input Terminal
„ TV
„ This burner
COMPONENT VIDEO OUT
PR
PB
Y
DC
R
L
VIDEO
HDMI
AUDIO
HDMI cable (not provided)
NOTES:
z Images can only be displayed on a High-bandwidth Digital Content Protection (HPCP) monitor. (0P24)
z When images do not appear normally, set the “HDMI COLOR SETTING” in the setting menu to “RGB”. (0P21)
Connecting to a TV with Component Video Input Connectors
„ TV
Component video cable
(not provided)
„ This burner
CMPONENVIDEO OU
PR
PB
Y
AUDIO IN
DC
R
L
VIDEO
CR/PR CB/PB
Y
L
R
AUDIO
Component video cable
Y=Green / PB=Blue
PR=Red
Audio cable
L=White / R=Red
Audio cable (not provided)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV with Video/Audio Input Connectors
Connect the output connectors of the burner to the input connectors of the TV with the provided Audio/Video
cable.
„ TV
„ This burner
COMPONENT VIDEO OUT
P
R
PB
Y
AUDIO IN
DC
R
L
VIDEO
AUDIO
L
R
VIDEO IN
Audio/Video cable
R=Red
L=White
VIDEO=Yellow
Audio/Video cable (provided)
Connecting to a TV with DVI Input Terminal
„ TV
HDMI-DVI cable
(not provided)
„ This burner
COMPONENT VIDEO OUT
PR
PB
Y
DC
AUDIO IN
R
L
VIDEO
AUDIO
DVI
L
R
Audio cable
R=Red
L=White
Audio cable (not provided)
NOTES:
z Images can only be displayed on a High-bandwidth Digital Content Protection (HPCP) monitor. (0P24)
z When black-and-white images are not clear, set the “HDMI ENHANCE SETTING” in the setting menu to “ON”. (0P21)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Saving Everio Camera Images to DVD
You can easily create data discs by connecting the burner to an Everio camera.
A Press the [OPEN/CLOSE] button
To Connect
after the menu appears on the
Everio.
PREPARATIONS:
z Power/Mode switch (Everio camera) : Off
z The disc tray opens.
z Power switch (This burner) : Off
B Insert a disc.
z We recommend you to use a compatible disc.
(0P25)
C Press the [OPEN/CLOSE] button.
z The disc tray closes.
USB
DC
USB cable
(provided)
D Create data/DVD video discs.
z Refer to the Everio camera instruction manual on how
to create data/DVD video discs.
AC adapter
(provided for the camera)
NOTES:
USB
z Data discs cannot be played on DVD recorders/players.
z DVDs created with GZ-MG series Everio camera equipped
with the direct DVD creation function are DVD video
discs, not data discs. (For details, refer to the instruction
manual of the Everio camera.)
COMPONENT VIDEO OUT
PR
PB
Y
DC
R
L
VIDEO
AUDIO
z A disc cannot be ejected while data is being written to the
disc. Wait until writing finishes.
z The remote control cannot be operated when the burner is
connected to the Everio camera via USB cable.
Power supply outlet
DC
Power cord
(provided)
z A considerable amount of time is required if over 1000
video or still images are being saved to DVD, therefore it is
advisable to back up in advance.
AC adapter
(provided for the burner)
When a disc cannot be ejected
............................................................................
z The positions of DC connector and USB connector and
indications (On/Off) of the Power/Mode switch may be
different for some Everio camera models.
When a disc cannot be ejected with the [OPEN/
CLOSE] button, use the following procedure to eject
by force.
z During saving, there is no output from the HDMI terminal
or COMPONENT VIDEO OUT connectors of this burner.
The video image can be displayed from the Everio
camera’s LCD monitor or by connecting the Everio camera
to a TV.
a Turn off the power.
b Insert a thin rod of about 10 cm long into the force
eject hole located on the right side of the burner.
The disc tray will be ejected for about 1 cm.
c Pull out the disc tray manually and take out the
Creating Data/DVD Video Discs
disc.
CAUTION:
z When recording an event (such as athletics meet) with an
Everio camera, it is advisable to use the same recording
mode throughout. Changing the recording mode will
cause an event to be divided and saved into two or more
folders.
z When there is a disc in the burner, do not subject the
Everio camera or burner to vibration or mechanical shock.
PREPARATIONS:
z Power/Mode switch (Everio camera) : On
z Power switch (This burner) : On
Force eject hole
z Be sure to place the burner horizontally.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving PC Images to DVD
This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also
be saved to a DVD by using the provided software.
z For details on how to save, refer to the Power2Go
To Connect
User’s guide, Help and ReadMe.
You can view User’s guide, Help and ReadMe from
the start menu of the PC.
PREPARATIONS:
z This burner cannot be used to write files into CD-R or
CD-RW. Also, it does not respond to all the functions
of Power2Go 5.5 Lite.
z Power switch (This burner) : Off
z PC Power : Off
z To get customer support and to register the software,
you need the following product key (CD-Key):
USB cable
(provided for the Everio
camera)
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
z Power2Go 5.5 Lite does not support conversion of
audio files to MP3 format.
z When the “Enter Activation Key” screen appears
while using Power2Go 5.5 Lite, close the screen
without entering the activation key.
USB
PC
Removing USB Cable from PC
USB
............................................................................
Power supply outlet
COMPONENT VIDEO OUT
PR
PB
Y
a Carry out removing of hardware on the PC.
b Remove the USB Cable.
DC
R
L
VIDEO
AUDIO
DC
Computers That Can Be Used
Power cord
(provided)
CyberLink Power2Go 5.5 Lite can be used on
computers satisfying the following conditions.
AC adapter
(provided for the burner)
„ Operating system:
Windowsா XP Home Edition [XP] (pre-installed)
Windowsா XP Home Professional [XP] (pre-installed)
„ Connector:
USB 2.0/1.1 connector
z If you use USB1.1 cable, it will take approximately 3
hours to write one DVD.
Saving to a DVD
„ CPU:
A Turn on the burner and the PC.
Intelா Pentiumா III, at least 800 MHz
(Intelா Pentiumா 4, at least 2 GHz recommended)
z Install the CyberLink Power2Go 5.5 Lite software if
you have not done so.
„ RAM:
At least 128 MB (at least 256 MB recommended)
B Insert a disc.
„ Free hard disk space:
At least 50 MB for installation
At least 5 GB recommended for making DVDs
z We recommend you to use a compatible disc.
(0P25)
„ Display:
Must be capable of displaying 800 c 600 dots
C Use Power2Go to save to a DVD.
1. Use Power2Go to create a folder.
z You can create the desired folder names; however
do not use “EVERIO_V” or “EVERIO_S” as the
folder name.
z Use half-width alphanumeric characters when
entering the folder or file names. You can enter up
to 40 half-width characters.
2. Set the file system of the data tab in the Power2Go
setup menu to “UDF1.5”.
3. Copy files such as MPEG, JPEG and TPD into the
folder.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
E Enter the “User Name” and
“Company Name” and then click
“Next”.
Installing CyberLink Power2Go 5.5
Lite
CAUTION:
z Do not play the provided CD-ROM in an audio player. It is
not an audio CD. Playing this CD-ROM in an audio player
will result in a loud high noise. It may also damage the
circuit and speaker.
A Insert the provided CD-ROM in the
PC.
F Follow the on-screen instructions.
z The “Choose Setup Language” screen appears.
z Installation starts. The “InstallShield Wizard
Complete” screen appears.
B Confirm the language and then click
“OK”.
G Click “Finish”.
z The following screen
appears.
z The computer will
restart and installation
is completed.
z If the screen on the
right does not appear,
proceed to step H.
C Click “Next”.
z The “License
Agreement” screen
appears.
H Click “Finish”.
z The “CyberLink
Power2Go 5.5”
Readme screen
appears.
D Confirm the contents and then click
“Yes”.
z The “Customer
Information” screen
appears.
I Read the contents of the Readme.
CyberLink Power2Go 5.5 Lite Contact Information
For information on CyberLink Power2Go 5.5 Lite or other products, use the following contact information.
„ Telephone/fax support
Location
Language
Office hours (Mon. to Fri.)
Phone #
Fax #
Germany
English / French / Spanish
9:00 am to 5:00 pm
+49-700-462-92375
+49-241-70525-25
„ Paid voice support
Location
Language
Office hours (Mon. to Fri.)
URL
U.S.A.
English
1:00 pm to 10:00 pm CST
„ Support web/e-mail
Language
English
French / Spanish
URL/e-mail address
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Configuration
This shows the folder configuration when files are saved from a high definition Everio camera or a PC
to DVD.
When video/still image files are saved from high definition Everio camera
.................................................................................................................................................................
Back-up date folders
Video folders
Root
*1
[EVERIO_V]
EVERIO VIDEO
[BACKUP]
NORMAL BACK-UP
[06060101]
[PRG001]
(Everio : ALL SCENES)
[06123199]
[PRG002]
[DATE]
[06060101]
[06060101]
[06060101]
[06060101]
DATE BACK-UP
(Everio : SELECT FROM DATE)
[EVENT]
EVENT BACK-UP
(Everio : SELECT FROM EVENT)
[FILES]
FILE BACK-UP
(Everio : SELECT FROM SCENES)
[PLAYLIST]
PLAYLIST BACK-UP
(Everio : SELECT FROM PLAYLIST)
Back-up date folders
Still image files
*1
[EVERIO_S]
[BACKUP]
NORMAL BACK-UP
[06060101]
[PIC_0001.JPG]
EVERIO IMAGE
[PIC_0002.JPG]
[DATE]
[06060101]
[06060101]
DATE BACK-UP
[FILES]
FILE BACK-UP
*1 Video and image files taken by high definition Everio camera that are saved to this burner will be saved in the “EVERIO_V”
and “EVERIO_S” folders.
When desired folders/files are created and saved on a PC
.................................................................................................................................................................
*2 Only high definition Everio video files (“.TPD” files)
Root
edited on the PC can be saved in the “EXTMOV” folder.
z “.TPD” files can also be saved in folders created on the
PC.
*3 Create folders with Power2Go and saved the desired
Video files to be edited
video and/or still image files into the folders. You can use
*2, 4
*5
your preferred folder names and file names. (Shown as
“USER DAT” in the illustration.)
[EXTMOV]
[MOV_0001.TPD]
EVERIO VIDEO
*4 Use Power2Go to save the “EXTMOV” and “USER DAT”
folders to DVD. (0P12)
[MOV_0002.TPD]
*5 Files with the extension “.TPD” are high definition Everio
video files that are edited on the PC.
Files with the extension “.MPG” are Everio video files
that are edited on the PC. (For details, refer to “Data
format (extension)” (0P25).)
Video/Still image files
*3, 4
[USER_DAT]
*5
[USER_DAT2]
[USER_DAT3]
[USER2.MPG]
CAUTION:
z You can create the desired folder and file names, however
do not use “EVERIO_V” or “EVERIO_S” as the folder
name. In addition, use half-width alphanumeric characters
when entering the folder or file names. You can enter up to
40 half-width characters.
[USER1.MPG]
[USER3.JPG]
z Folders can only be created up to 16 levels. Playback may
be impossible if folders exceed 16 levels.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Viewing Images Saved in DVD
This burner can play DVDs saved from an Everio camera or a PC.
Viewing Videos Saved from High Definition Everio Camera
D Select “NORMAL BACK-UP”.
„ To playback the image immediately after saving in
DVD
1. SELECT
PLAY VIDEO
EVERIO VIDEO
NAME
1. Remove the USB cable. (0P12)
2. Turn off the power of this burner.
3. Connect to TV and power on this burner.
NORMAL BACK-UP
NORMAL BACK-UP
DATE BACK-UP
EVENT BACK-UP
FILE BACK-UP
PLAYLIST BACK-UP
1/5
z Confirm that the power lamp on the burner is lighted
in orange.
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
For details on connections, refer to “Connecting to TV”
(0P9, 10).
z Files will be sorted automatically to the created
folders, depending on the items selected in the
“CREATE DVD” function of the high definition Everio
camera. (0P14)
<Example>
When all videos shot on a high definition Everio camera are
saved in DVD.
E Select the date saved in DVD.
A Insert a disc.
1. SELECT
PLAY VIDEO
NORMAL BACK-UP
NAME
06060101
06060101
06123199
B Select “PLAY VIDEO”.
1. SELECT
1/2
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
PLAY VIDEO
PLAY IMAGE
F Select the folder to be played.
2. CONFIRM
1. SELECT
PLAY VIDEO
06060101
NAME
z The playback navigator appears.
PRG001
PRG001
PRG002
NUMBER OF FILE
99
PRG003
PRG004
PRG005
DATE
PRG006
1.6.2006
TIME
00:00:00
PRG007
PRG008
C Select “EVERIO VIDEO”.
1/8
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
1. SELECT
PLAY VIDEO
PLAY VIDEO
NAME
EVERIO VIDEO
EVERIO VIDEO
z The files in the folder will be played sequentially.
z For details on playback operations, refer to “Buttons
that can be used during playback” (0P16).
1/3
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
CAUTION:
z There will be an approximately 0.5 seconds still image
z To playback videos saved from a PC, select “EDITED
VIDEO”. (0P14)
z If you had created a desired folder on a PC, select that
folder name.
between each file.
z An approximately 2 seconds black screen will appear
between each folder when you press the [S] /[T]
buttons to select the folder to be played.
CAUTION:
z Check the resolution setting if the image is not displayed.
(0P19)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons that can be used during playback
.................................................................................................................................................................
Button names
PLAY
During video playback
Pressing the button during pause or variable Starts a slideshow.
speed playback will play the video.
During still image playback
z You can also use the [ENTER] button.
z You can also use the [ENTER] button.
Stops the playback and displays still images. Stops the slideshow and displays still images.
PAUSE
STOP
z You can also use the [ENTER] button.
z You can also use the [ENTER] button.
Stops the playback and returns to the playback navigator.
z You can also use the [RETURN], [TOP MENU] or [MENU] button.
Pressing the button each time changes the
search from Search b1 to Search b5.
z Pressing the [FWD] button changes the
search to Search a1.
REV
b
b
z Slow reverse cannot be performed.
Pressing the button each time changes the
search from Search a1 to Search a5.
z Pressing the [REV] button changes the search
to Search b1.
FWD
Pressing the button each time during pause
will play the video in 4 different speeds of
1/16x, 1/8x, 1/4x and 1/2x.
Displays the next folder.
Displays the next file.
NEXT
Displays the beginning of the folder.
Displays the previous file.
PREVIOUS
Moves the playback position forward for
approx. 30 seconds. Pressing this button
continuously will move the position ahead for
the number of times the button is pressed.
Moves the playback position backward for
approx. 7 seconds. Pressing this button
continuously will move the position backward
for the number of times the button is pressed.
Skip
b
b
Replay
Displays the beginning of the file.
Selection key :
UP
When paused, each press of the button rotates
the image 90 degrees.
Displays the next file.
Selection key :
DOWN
Pressing the button each time changes the
search from Search b1 to Search b5.
z Pressing the [FWD] button changes the
search to Search a1.
Displays the previous file.
Displays the next file.
Selection key :
LEFT
z Slow reverse cannot be performed.
Pressing the button each time changes the
search from Search a1 to Search a5.
z Pressing the [REV] button changes the search
to Search b1.
Selection key :
RIGHT
Changes the playback settings. (While the
screen in step F on page 15 is displayed.)
CONTINUE PLAYBACK : Plays the video from
the previously stopped position.
PLAY FROM BEGINNING : Plays the video
from the beginning of the file.
Changes the playback settings. (While the screen
in step C on page 17 is displayed.)
„ SLIDESHOW INTERVAL
Sets the time to display one image (maximum
approx. 2 MB). It may take some time to
display depending on the image size.
10 SEC / 15 SEC / 20 SEC
„ SLIDESHOW EFFECTS
Sets a fading effect when changing image
display.
TOOL
ON : Fade in from black, fade out to black
OFF : No fading effect.
„ CHANGE VIEW
Sets the display format of the playback
navigator.
Thumbnail/List
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Viewing Still Images Saved from High Definition Everio Camera
E Select the date saved in DVD.
„ To playback the image immediately after saving in
DVD
1. SELECT
PLAY IMAGE
NORMAL BACK-UP
NAME
1. Remove the USB cable. (0P12)
06060101
06060101
2. Turn off the power of this burner.
3. Connect to TV and power on this burner.
1/1
z Confirm that the power lamp on the burner is lighted
in orange.
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
For details on connections, refer to “Connecting to TV”
(0P9, 10).
F Select the file to be played.
<Example>
When all still images shot on a high definition Everio
camera are saved in DVD.
1. SELECT
PLAY IMAGE
06060101
NAME
PIC_0001.JPG
FOLDER
104JVCSO
DATE
1.6.2006
TIME
00:00:00
A Insert a disc.
SIZE
1920x 1080
1/12
SET RETURN RETURN
TOOL MENU
TOOL
2. CONFIRM
B Select “PLAY IMAGE”.
z Playback starts.
z For details on playback operations, refer to “Buttons
that can be used during playback” (0P16).
1. SELECT
NOTES:
PLAY VIDEO
PLAY IMAGE
z Only still images conforming to the Exif standard will be
displayed in thumbnails. For any other still images, “?” is
displayed and they may not be playable.
2. CONFIRM
z It may take some time to display if the image file size is
large or when there are many files.
z The playback navigator appears.
C Select “EVERIO IMAGE”.
1. SELECT
PLAY IMAGE
PLAY IMAGE
EVERIO IMAGE USER_DAT
NAME
EVERIO IMAGE
1/2
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
z If you had created a desired folder on a PC, select that
folder name. The folder is displayed as “USER DAT”
on the screen in step C. (0P14)
CAUTION:
z Check the resolution setting if the image is not displayed.
(0P19)
D Select “NORMAL BACK-UP”.
1. SELECT
PLAY IMAGE
EVERIO IMAGE
NAME
NORMAL BACK-UP
NORMAL BAC
K-UP
DATE BACK-U FILE BACK-UP
P
1/3
TOOL
SET RETURN RETURN
TOOL MENU
2. CONFIRM
z Files will be sorted automatically to the created
folders, depending on the items selected in the
“CREATE DVD” function of the high definition Everio
camera. (0P14)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing DVD Videos Saved from Everio Camera
CAUTION:
„ To playback the image immediately after saving in
z Check the resolution setting if the image is not displayed.
(0P19)
DVD
1. Remove the USB cable. (0P12)
2. Turn off the power of this burner.
3. Connect to TV and power on this burner.
NOTE:
z A music CD cannot be played when a TV is connected.
z Confirm that the power lamp on the burner is lighted
in orange.
For details on connections, refer to “Connecting to TV”
(0P9, 10).
Displaying menu screen during playback
............................................................................
A Insert a disc.
or
B Play the video.
z The video plays back or a menu screen appears.
Exiting menu screen
............................................................................
C When the menu screen appears,
select a menu item.
1. SELECT
2. CONFIRM
Buttons that can be used during playback
.................................................................................................................................................................
Button names
PLAY
During DVD video playback
Pressing the button during pause or variable speed playback will play the video.
PAUSE
STOP
Pauses the playback.
Stops playback.
Pressing the button each time changes the search from Search b1 to Search b5.
z Pressing the [FWD] button changes the search to Search a1.
z Slow reverse cannot be performed.
REV
Pressing the button each time changes the search from Search a1 to Search a5.
z Pressing the [REV] button changes the search to Search b1.
Pressing the button each time during pause will play the video in 4 different speeds of 1/16x,
1/8x, 1/4x and 1/2x.
FWD
NEXT
Moves to the next chapter.
PREVIOUS Moves to the previous chapter.
Moves the playback position forward for approx. 30 seconds. Pressing this button continuously
will move the position ahead for the number of times the button is pressed.
Skip
Moves the playback position backward for approx. 7 seconds. Pressing this button continuously
will move the position backward for the number of times the button is pressed.
Replay
Changes the playback settings. (During playback)
AUDIO LANGUAGE : Not available.
SUBTITLE LANGUAGE : Not available.
CHANGE ANGLE : Not available.
TOOL
CHANGE TITLE : Select the title and jump to that title.
CHANGE CHAPTER : Select the chapter and jump to that chapter.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Viewing High Quality Images
You can change the video output resolution when the burner is connected to a progressive scan TV
via an HDMI cable or component video cable.
A Change output resolution during
B Select “YES”.
stop mode.
1. SELECT
CURRENT RESOLUTION
:
480i
DO YOU WANT TO SAVE THE SETTINGS?
YES
NO
2. CONFIRM
z Every press of the button changes the resolution as
follows.
z If the image is not displayed on the TV after changing
the resolution, do not operate the burner for 15
seconds. The resolution setting before the change is
restored.
Connection via HDMI cable (However, the selections
for resolution not supported by TV may not be
displayed.)
NOTES:
AUTO
480p
1080i
720p
z When HDMI cable is connected, images are not output in
analog.
Connection via component video cable (HDMI cable
is not connected)
z When “480i” is selected, images are output from both the
VIDEO connector and the COMPONENT VIDEO OUT
connectors.
480i
480p
1080i
720p
CAUTION:
Connection via video cable
Set the resolution to “480i”. Image cannot be
displayed if other settings are being selected. Press
the [RESOLUTION] button and set to “480i”.
z “AUTO” will be selected automatically when the burner is
connected via an HDMI cable to a TV not supporting the
selected resolution.
z When the burner is connected to a TV via a component
video cable and the output resolution is set to “1080i” or
“720p”, playback will stop if a digital copy protected (CSS)
disc is played. (0P24)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Settings
Configures basic settings that determines the operation of the burner.
Menu Operation Procedures
<Example>
F Select “YES”.
To change the “SELECT TV TYPE” of “VIDEOS” from
“16:9” to “4:3LB”.
1. SELECT
SETTINGS
VIDEOS
SELECT TV TYPE
4:3 LB
When connected to TV and power is on
A Display the “SETTINGS” screen.
DO YOU WANT TO SAVE THE SETTINGS?
YES
NO
SAVE
CANCEL
R
E
T
U
R
SELECT
SET
N CANCEL
2. CONFIRM
G Exit the “SETTINGS” screen.
B Select “VIDEOS”.
1. SELECT
SETTINGS
VIDEOS
DVD
GENERAL
RESET
1/4
SET
UP CANCEL
SELECT
SET
2. CONFIRM
C Select “SELECT TV TYPE”.
1. SELECT
SETTINGS
VIDEOS
SELECT TV TYPE
16:9
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SAVE
CANCEL
CANCEL
CANCEL
R
E
T
UR
SELECT
SET
N CANCEL
2. CONFIRM
D Select “4:3LB”.
1. SELECT
SETTINGS
VIDEOS
SELECT TV TYPE
4:3 LB
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SAVE
RE
T
UR
SELECT
SET
N CANCEL
2. CONFIRM
E Select “SAVE”.
1. SELECT
SETTINGS
VIDEOS
SELECT TV TYPE
4:3 LB
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SAVE
R
E
T
U
R
SELECT
SET
N CANCEL
2. CONFIRM
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Setting Items And Contents
is the default setting.
„ VIDEOS
SELECT TV TYPE
Configure the settings according to the TV to be connected. (If the screen size setting of the TV is fixed, the screen size
setting of the TV remains the same even if you change the setting on this burner.)
16:9
When connected to a wide TV (16:9).
When connected to a 4:3 TV (16:9 images will appear with black bands on the
top and bottom).
4:3LB
When connected to a 4:3 TV (16:9 images will appear with the left and right
sides missing).
4:3PS
HDMI COLOR SETTING
Sets the video format from the COMPONENT VIDEO OUT of the burner.
AUTO
Normally selects this.
RGB
When images do not appear properly due to the specifications of the TV.
HDMI ENHANCE SETTING
Set this when connected to a DVI device.
OFF
ON
Normally selects this.
When connected to a DVI device and black-and-white images are not clear.
„ DVD
The following items will not take effect even if configured.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
„ GENERAL
LANGUAGE
Sets the language to be displayed on the screen such as the “SETTINGS” screen.
Set the language.
(“ENGLISH” is set as the default language.)
DATE DISPLAY STYLE
Changes the date format.
year.month.day
month.day.year
day.month.year
Set the date format.
„ RESET
Returns the settings to default.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Display
Information during playback can be displayed on the screen.
During playback
When playing video saved from a high
definition Everio camera
............................................................................
File Date (Displays the date and time of
recording of the first file in the folder.)
z Every press of the button changes the display mode.
1.6.2006 00:00:00
MPEG
PRG001
File Name
Audio Format
Auto mode (During video/still images playback only)
Displays the playback status and playback time/
playback position for 3 seconds when there is a change
in status.
00:00:24
B.SKIP/F.SKIP
Playback Status
Playback Time/
Playback Position
REW/FF
STOP
PAUSE
Operation Guide
Half mode
Displays the playback status and playback time/
playback position.
When playing still image saved from a high
Full mode
definition Everio camera
............................................................................
Displays all information including file name.
Hide mode
Folder Name
File Date
Hides the information.
104JVCS0
1.6.2006 00:00:00
PIC_0001.JPG
1920 x 1080
File Name
File Resolution
Playback Status
STOP SLIDESHOW
Operation Guide
When playing DVD video saved from an
Everio camera
............................................................................
Chapter Number
TITLE1
CHAPTER1
Title Number
Audio Format
00:00:08
B.SKIP/F.SKIP
Playback Status
Playback Time/
REW/FF
STOP
PAUSE
Playback Position
Operation Guide
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Troubleshooting
Trouble
General
Cause/Action
z Make sure the AC adapter and power cord are connected properly.
z This is not a malfunction.
Cannot turn the power on.
The burner or AC adapter is hot.
z If the burner is abnormally hot, remove the AC adapter and consult
the dealer from which you purchased the burner.
After pressing the power button, it takes
approximately 20 seconds before the burner
becomes operable.
z This is not a malfunction.
z Turn the burner off, and then turn it back on again.
Malfunction or error occurs.
Saving
z Make sure the USB cable is connected properly. Install the projected
end of the terminal to the burner and the other end to the Everio
camera.
The Everio camera is not recognized.
The PC is not recognized.
z Make sure the USB cable provided for the Everio camera is connected
properly.
z A disc cannot be ejected by pressing the eject button if data is being
written to the disc. Wait until writing finishes.
z If a disc cannot be ejected with the eject button because of a failure
or a malfunction caused by, for example, the burner being dropped,
insert a thin rod of about 10 cm long into the force eject hole to eject
the disc. (0P11)
Cannot open the disc tray.
z Insert the disc with the label facing up.
z Make sure the disc tray is not dirty.
z Make sure the writing surface of the disc is not damaged.
z Make sure that special-shaped discs are not used.
z Any CD that does not comply with standards such as the CD-DA
standard (copy-control CDs) cannot be played.
Reading fails.
z For CD-R or CD-RW, make sure it is not recorded using the packet-
write method.
z Make sure an appropriate disc is being used. (0P25)
z Use discs recommended for the burner. (0P26)
z Make sure that a new disc is used for DVD-R.
z Insert the disc with the label facing up.
Writing fails.
z Make sure the disc tray is not dirty.
z Make sure the writing surface of the disc is not damaged.
z Make sure that special-shaped discs are not used.
z Connect the burner to the Everio camera, playback using “PLAY
DVD” function of the camera, and dub the DVD discs with the DVD
recorder. (Refer to the instruction manual of Everio.)
It is impossible to dub the DVD discs, which were
written with this burner, on a HDD-DVD recorder.
z Make sure an appropriate disc is being used. (0P25)
Writing/reading at maximum speed is not possible z Use discs recommended for the burner. (0P26)
(when connected to PC).
z Make sure a proper standard disc is being used. (Writing/reading at
maximum speed may not possible if non-standard discs are used.)
Playback
z Remove the batteries, insert them again and operate the remote
control.
The remote control is not working.
z Replace with new batteries.
z Operation may be prohibited due to the disc or other conditions.
z If the burner does not work at all, turn off the power and turn it on
again. (It may not work properly due to lightning strike or static
electricity.)
Unable to operate.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble
Cause/Action
z Is the video input displayed? Change to external output for the burner
connected to a TV with video/audio input connectors.
z When the image is not displayed on the TV after pressing the
[RESOLUTION] button, do not operate the burner for 15 seconds.
The resolution setting before the change is restored. (0P19)
No images on the TV.
z Check the resolution setting again. (0P19)
Images are distorted during forward search or
reverse search.
z Images may be distorted for sections where the playback speed
changes. This is not a malfunction.
Commercial DVDs cannot be played when the
burner is connected to PC.
z Play the disc of which the region number of the DVD video is “ALL”
or “2”.
z Images added to the disc (multi-border disc) by PC cannot be played
on this burner.
Images added by PC cannot be played.
It takes some time to display the images during
still image playback.
z The file size is too large or there are too many files. This is not a
malfunction.
When changing from special playback to normal
playback, or during slow playback, mosaic
pattern (block noise) appears.
z This is not a malfunction.
Error Messages
Trouble
Cause/Action
z A blank disc is inserted.
z Insert a disc that can be played on the burner. (0P25)
UNREADABLE DISC
z The disc may be dirty. Clean the disc and try again.
z The disc was not finalized after saving from a high definition Everio
camera. Make sure to finalize the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
DISC ERROR
z Stop the playback and operate again.
CANNOT OPERATE NOW
HDCP INCOMPATIBLE, CANNOT DISPLAY
USE HDCP COMPATIBLE MONITOR
z Connect the burner to a HDCP compliant monitor.
DETECTED COPY GUARD
CANNOT DISPLAY WITH 1080i/720p
SET TO 480i OR 480p
z Make analog connection and set resolution to “480i” or “480p”.
(0P19)
z The data format is not compatible. Confirm the data format. (0P25)
z The disc was not finalized after saving from a high definition Everio
camera. Make sure to finalize the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
INCOMPATIBLE DATA
CANNOT PLAY BACK
z File data may be missing.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Specifications
„ Weight
General
............................................................................
Approx. 32 g (0.1 lbs)
(including button battery)
„ Power Supply
DC12 V
„ Rated current
Recommended discs
............................................................................
1.7 A
„ DVD-R
„ Dimensions (W c H c D)
171 c 56 c 262 mm (6-3/4" c 2-1/5" c 10-3/10")
„ Weight of main unit
JVC, TDK, Verbatim, SONY
„ DVD-R DL*1
JVC, Verbatim
„ DVD-RW
Approx. 1.4 kg (3.1 lbs)
(excluding AC adapter and connection cables)
„ Operating Environment
JVC
Operating temperature : 0 % to 40 % (32 $ to 104 $)
Operating humidity : 35 % to 80 %
Storage temperature : b20 % to 60 % (b4 $ to 140 $)
z Optimal performance of the burner may not be possible
depending on the disc used. Using discs of manufacturers
for which compatibility has been confirmed is
recommended.
„ Laser Power
z Only 12 cm discs can be used with this burner.
For DVD
Wavelength : 653 to 663 nm
Output : 1.0 mW
For CD
Wavelength : 770 to 810 nm
Output : 0.4 mW
*1 DVD-R DL discs can be used when the burner is
connected to a high definition Everio camera or a PC.
CAUTION:
z When a DVD-R disc is finalized, additional recordings to
the disc are not possible. In addition, the disc cannot be
formatted (initialized).
z After finalizing a DVD-RW disc, additional recordings to
the disc are possible by formatting (initializing) the disc.
However, data (video/audio) saved will be deleted.
AC adapter (AP-V400U)
............................................................................
„ Power Supply
AC110 V to 240 V t, 50 Hz/60 Hz
„ Input capacity
Playback
............................................................................
1.5 A
„ Compatible discs
„ Output
DVD-R, DVD-R DL, DVD-RW
„ Data format (extension)
DC12 V s, 4 A
„ Operating temperature
0 % to 40 % (32 $ to 104 $)
„ Dimensions (W c H c D)
z DVD data discs that are created using high definition
Everio camera
z DVD data discs that are created using Everio camera
52 c 31 c 120 mm (2" c 1-1/5" c 4-7/10")
z DVD data discs that are written with data taken by high
definition Everio camera and edited using the provided
editing software.
(When a disc stops during playback and block noise
occurs, disable the SVRT function in the editing
software.)
(excluding power cord)
„ Weight
Approx. 250 g (0.6 lbs)
z Following are the file extensions recognized by this
burner. (It is not guaranteed that the following file
extensions can be played back.)
Remote control (RM-V41U)
............................................................................
z When connected to an Everio camera: TOD, JPG
z When connected to a PC: MOD, TPD, JPG
z Others:
MPG, MPEG, MPE, M2P, M2T, M2TS, TS, JPEG, JPE
When playing files created on a PC, pressing the [I]
button after searching may cause the playback
position to deviate.
„ Type
DC 3 V (CR2025 button battery)
„ Battery life
Approx. 1 year (depending on the frequency of use)
„ Operating distance
Approx. 5 m (face up)
„ Video output
„ Operating temperature
0 % to 40 % (32 $ to 104 $)
„ Dimensions (W c H c D)
42 c 12 c 100 mm (1-7/10" c 1/2" c 4")
1.0 V 75 & (Pin jack)
„ Audio output
2.0 Vrms 1 k& (Pin jack)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Component video output
Reading
DVD-R : Maximum 12x
Y p-p : 1.0 V 75 & (Pin jack)
DVD-RW : Maximum 12x
DVD-ROM : Maximum 5x
DVD-R DL : Maximum 8x
CD-R : Maximum 10x *2
CD-RW : Maximum 10x *2
CD-ROM : Maximum 10x *3
CB/CR, PB/PR p-p : 0.7 V 75 & (Pin jack)
„ HDMI output
19-pin HDCP compliant
Video :480p / 1080i / 720p
(Compatibility with DVI-D is not guaranteed)
Audio : 2CH PCM/Bit stream
„ Compatible discs (8 cm discs cannot be used)
CAUTION:
Writing :
DVD-R, DVD-R DL, DVD-RW
Reading :
z Discs other than those stated above, and commercially
available DVD videos cannot be played back properly.
DVD-R, DVD-R DL, DVD-RW, DVD-ROM, DVD video,
CD-ROM, CD-DA *4, CD Extra, Video CD, Mixed CD,
CD-R, CD-RW
When connected to an Everio camera
............................................................................
„ Supported software
„ Interface
CyberLink PowerCinema NE for Everio/
PowerProducer 3 NE (Provided for Everio camera)
CyberLink Power2Go 5.5 Lite (provided)
USB2.0
„ Interface cable
USB cable (Mini type A b Mini type B)
„ Compatible discs for writing (8 cm discs cannot be used)
*1 If you use USB1.1 cable, it will take approximately 3
hours to write one DVD.
Everio : DVD-R, DVD-RW (6x DVD-RW discs cannot be
used)
*2 Any CD recorded using the packet-write method cannot
be played.
High definition Everio : DVD-R, DVD-R DL, DVD-RW
*3 Operation is not guaranteed for any CD not compliant
with the CD-DA standard (copy control CD).
„ Recording format
*4 It may not be possible to read the audio files depending
on the music CDs (CD-DA). In this case, make use of
applications such as Windows Media Player.
Everio : DVD video (video only)
High definition Everio : Data DVD (video, still image)
„ Recording time
Everio :
Approx. 30 minutes (including time taken for
finalization)
z Approx. 90 minutes of video recorded in fine mode
on a 4.7 GB disc. (Varies depending on conditions
such as number of titles.)
High definition Everio :
Approx. 35 minutes (including time taken for
finalization)
z Approx. 40 minutes of video recorded in full HD
mode on a 8.5 GB DVD-R DL disc. (Varies depending
on conditions such as number of titles.)
z GZ-MC100, GZ-MC200, GZ-MC500, GZ-MG40,
GZ-MG50, GZ-MG70 cannot be used.
When connected to a PC
............................................................................
„ Interface
USB2.0, USB1.1 *1
„ Interface cable
USB cable (USB cable provided for the Everio camera
can also be used.)
„ Supported operating systems
Windows XP Home Edition, Windows XP Professional
(Macintosh is not supported.)
„ Data buffer capacity
2 MB
„ Data transfer rate (for USB2.0)
Writing
DVD-R : Maximum 8x
DVD-R DL : Maximum 4x
DVD-RW : Maximum 4x
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
FR
ES
Memo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
0307MNH-SW-BJ
© 2007 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|