AUDIO/VIDEO CONTROL RECEIVER
RX-7020VBK
A/V CONTROL RECEIVER
CATV/DBS
DVD
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
CD
TV/DBS
TAPE/CDR PHONO
BASS
TREBLE
−
+
−
+
SURROUND
ON/OFF
SURROUND ANALOG/DIGITAL SLEEP
MODE
INPUT
–
CENTER
+
BASS BOOST EFFECT
1
2
3
MENU
SOUND
DIMMER
MUTING
TEST
–
REAR•L
+
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
4
5
–
6
+
ENTER
REAR•R
FM/AM TUNING
FM/AM PRESET
FM MODE
MEMORY
COMPULINK
Remote
7/P
8
9
STANDBY
MASTER VOLUME
– SUBWOOFER +
10
RETURN
0
+10
100
+
FM MODE
STANDBY/ON
CATV/DBS
CONTROL
+
+
+
CH
TV VOL
VOLUME
INPUT
TV/VIDEO
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
−
−
−
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
INPUT ATT
+
CONTROL
DOWN UP
SPEAKERS ON/OFF
/REW
FF/
TUNING
1
2
CD
PHONO
TAPE/CDR
FM/AM
−
REC
SOURCE NAME
PAUSE
PHONES
CONTROL
RM-SRX7020J REMOTE CONTROL
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0852-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Parts Identification...................................... 2
Getting Started........................................... 3
Before Installation ...................................................................... 3
Checking the Supplied Accessories ........................................... 3
Putting Batteries in the Remote Control .................................... 3
Connecting the FM and AM Antennas ....................................... 4
Connecting the Speakers ............................................................ 5
Connecting Audio/Video Components....................................... 6
Connecting the Power Cord ....................................................... 9
Basic Operations ....................................... 10
Turning On the Power .............................................................. 10
Selecting the Source to Play ..................................................... 10
Adjusting the Volume ............................................................... 11
Selecting the Front Speakers .................................................... 11
Listening Only with Headphones ............................................. 12
Turning Off the Sounds Temporarily—Muting........................ 12
Changing the Display Brightness ............................................. 12
Turning Off the Power with the Sleep Timer ........................... 12
Basic Settings........................................... 14
Setting the Digital Input (DIGITAL IN) Terminals ................. 14
Selecting the Analog or Digital Input Mode ............................ 15
Selecting the Video Input Terminal .......................................... 16
Setting the Speaker Information............................................... 16
Sound Adjustments.................................... 19
Attenuating the Input Signal .................................................... 19
Adjusting the Front Speakers Output Balance ......................... 19
Adjusting the Tone ................................................................... 20
Adjusting the Subwoofer Output Level.................................... 20
Reinforcing the Bass ................................................................ 20
Tuner Operations....................................... 21
Tuning in Stations Manually .................................................... 21
Using Preset Tuning ................................................................. 21
Selecting the FM Reception Mode........................................... 22
Creating Realistic Sound Fields ................... 23
About Relations between Speaker Layouts and
Surround Modes ................................................................. 25
Using Dolby Pro Logic II, Dolby Digital
and DTS Digital Surround ................................................. 26
Using DAP Modes and All Channel Stereo ............................. 28
Using DVD MULTI Playback Mode................ 30
Activating DVD MULTI Playback Mode ................................ 30
COMPU LINK Remote Control System ......... 31
AV COMPU LINK Remote Control System .... 32
Operating JVC’s Audio/Video
Components.......................................... 34
Operating Audio Components .................................................. 34
Operating Video Components .................................................. 36
Operating Other Manufacturers’ Video
Equipment ............................................ 37
Troubleshooting......................................... 40
Specifications............................................ 41
This mark indicates that the remote control CAN
ONLY be used for the operation explained.
This mark indicates that the remote control CANNOT
be used for the operation explained. Use buttons on
the front panel.
Remote
NOT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Front Panel
1
2
3
4 5
7 8 9
6
p
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
FM/AM TUNING
FM/AM PRESET
FM MODE
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
STANDBY
L
C
DIGITAL AUTO
LINEAR PCM
DIGITAL
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
MEMORY
S.WFR LFE
MASTER VOLUME
LS
S
RS
CH-
STANDBY/ON
INPUT
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
CONTROL
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
INPUT ATT
DOWN
UP
SPEAKERS ON/OFF
1
2
CD
TAPE/CDR
FM/AM
PHONO
SOURCE NAME
PHONES
q
e
i
o
w
y
u
r
t
See pages in the parentheses for details.
Remote Control
Front Panel
Remote Control
1
STANDBY/ON
lamp (10)
FM/AM TUNING 5/∞ buttons (21)
FM/AM PRESET 5/∞ buttons (21, 22)
FM MODE button (22)
button and STANDBY
1
Display window
A/V CONTROL RECEIVER
a: Remote control operation mode indicator
b: Signal transmission indicator
Lights up when transmitting the remote control
signal.
Power buttons (10, 36 – 39)
CATV/DBS
AUDIO
Source selecting buttons
(10, 11, 15, 21, 22, 30, 34 – 39) *
DVD, DVD MULTI, CD, FM/AM, TV/DBS, VCR,
TAPE/CDR, PHONO
BASS +/– buttons (20)
SURROUND ON/OFF button (25, 26, 28)
SURROUND MODE button (25, 26, 28)
BASS BOOST button (20)
SOUND button (20, 27, 28, 30) *
DIMMER button (12)
MUTING button (12)
CATV/DBS CONTROL button (37) *
TV/VIDEO button (36, 37)
CH (channel) +/– buttons (36 – 38)
TUNING +/– buttons (21)
REC PAUSE button (35, 36, 38)
TREBLE +/– buttons (20)
2
3
4
5
6
7
8
9
p
q
w
e
r
1
a
b
MEMORY button (21, 22)
Display (10)
2
3
, VCR
, TV
,
CATV/DBS
DVD
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
2
3
4
ADJUST button (19, 20, 27 – 29, 30)
Remote sensor (3)
SETTING button (14, 16 – 18)
MASTER VOLUME control (11)
PHONES jack (12)
SURROUND ON/OFF button (25, 27, 29)
SURROUND MODE button (25, 27, 29)
• INPUT ANALOG/DIGITAL button (15)
• INPUT ATT button (19)
• SPEAKERS ON/OFF 1 button (11, 12)
• SPEAKERS ON/OFF 2 button (11, 12)
BASS BOOST button (20)
SOURCE NAME buttons (11)
Source selecting buttons
(10, 11, 15, 21, 22, 30)
DVD MULTI, DVD, VCR,
TV SOUND/DBS, CD, TAPE/CDR,
PHONO, FM/AM
CD
TV/DBS
TAPE/CDR PHONO
BASS
TREBLE
−
y
−
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP
ON/OFF
MODE
INPUT
5
6
7
8
u
i
4
5
6
7
8
9
p
q
w
e
r
t
y
u
i
o
– CENTER +
BASS BOOST EFFECT
1
TEST
2
3
MENU
– REAR • L +
SOUND
4
5
6
ENTER
t
DIMMER
MUTING
– REAR • R +
o
7/P
8
9
9
p
– SUBWOOFER +
y
u
i
10
RETURN
0
+10
+
100
FM MODE
CATV/DBS
CONTROL
;
a
q
+
+
+
CH
TV VOL
VOLUME
TV/VIDEO
w
e
−
−
−
+
/REW
FF/
TUNING
r
o
CONTROL UP5/DOWN∞ buttons
(14, 16 – 20, 27 – 29, 30)
SLEEP button (12)
s
d
−
ANALOG/DIGITAL INPUT button (15)
• 10 keys for selecting preset channels (22)
• 10 keys for adjusting sound (20, 27, 28, 30)
• 10 keys for operating audio/video components
(35 – 39)
REC
PAUSE
t
CONTROL
RM-SRX7020J REMOTE CONTROL
;
a
s
TV VOL (volume) +/– buttons (36, 37)
VOLUME +/– buttons (11)
Operating buttons for audio/video components
(35 – 38)
d
CONTROL button (34 – 36) *
* When you press one of these buttons, the remote control operation mode appears on
the display window.
Buttons on the Remote Control
TV/DBS
Remote Control Operation Mode
Buttons on the Remote Control
Remote Control Operation Mode
TV
VCR
FM/AM
CD
TUNER
CD
VCR
CATV/DBS CONTROL
CONTROL
DBS
PHONO
TAPE/CDR
DVD
PHONO
TAPE
DVD
VCR or TAPE
or CDDSC
SOUND
SOUND
DVD MULTI
DVD
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Putting Batteries in the Remote Control
Before Installation
General Precautions
• DO NOT insert any metal object into the unit.
• DO NOT disassemble the unit or remove screws, covers, or
cabinet.
Before using the remote control, put two supplied batteries first.
• When using the remote control, aim the remote control directly at
the remote sensor on the unit.
1 On the back of the remote control, remove the
• DO NOT expose the unit to rain or moisture.
battery cover.
Locations
• Install the unit in a location that is level and protected from
moisture.
• The temperature around the unit must be between –5˚C and 35˚C
(23˚F and 95˚F).
• Make sure there is good ventilation around the unit. Poor
ventilation could cause overheating and damage the unit.
Handling the unit
• DO NOT touch the power cord with wet hands.
• DO NOT pull on the power cord to unplug the cord. When
unplugging the cord, always grasp the plug so as not to damage
the cord.
2 Insert batteries.
• Make sure to match the polarity: (+) to (+) and (–) to (–).
• Keep the power cord away from the connecting cords and the
antenna. The power cord may cause noise or screen interference. It
is recommended to use a coaxial cable for antenna connection,
since it is well-shielded against interference.
• When a power failure occurs, or when you unplug the power cord,
the preset settings such as preset FM/AM channels and sound
adjustments may be erased in a few days.
Checking the Supplied Accessories
Check to be sure you have all of the following supplied accessories.
The number in the parentheses indicates the quantity of the pieces
supplied.
3 Replace the cover.
• Remote Control (1)
• Batteries (2)
• AM Loop Antenna (1)
• FM Antenna (1)
If anything is missing, contact your dealer immediately.
If the range or effectiveness of the remote control decreases, replace
the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.
CAUTION:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:
(+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the FM and AM Antennas
AM Loop Antenna
(supplied)
Outdoor FM antenna (not supplied)
If FM reception is poor, connect outdoor FM
antenna.
or
FM 75
AXIAL
FM 75
AXIAL
CO
CO
Standard type
outdoor FM antenna
(not supplied)
Supplied FM
antenna
ANTENNA
FM 75
COAXIAL
FM antenna (supplied)
Extend the supplied FM antenna horizontally.
Snap the tabs on the loop
into the slots of the base
to assemble the AM loop
antenna.
AM
LOOP
AM
EXT
If AM reception is poor, connect
outdoor single vinyl-covered wire
(not supplied).
1
2
3
/CR
PR
/CB
PB
2
+
Y
16
32
FRONT
:
8
SPEAKERS
2
:16
CAUTION
:
SPEAKER IMPEDANCE
2
AND
OR
+
1
1
COMPONENT VIDEO
MONITOR OUT
1
–
DVD
REAR
SPEAKERS
FM X7I5AL
+
ANTENNACOA
DBS
–
CENTER
SPEAKER
AV
RIGHT
+
COMPU LINK-III
MONITOR
OUT
COMPU LINK-4
(SYNCHRO)
IHT
AM
LOOP
DVD
–
AL 1
)
PHONO
CD
OUT
(REC)
VCR
LEFT
AUDIO
RIGHT
DIGITDVD
(
CAUTION
SPEAKER
:
IMPEDANCE
IN
Y)
1
6
(PLA
8
FRONT
SUB
)
OUT
ER
T
CD
TV
(
(REC)
AL 2
DIGIT
E
P
TA
/CDR
IN
Y)
)
)
S-VIDEO
OOFER
REAR
(
(PLA
AL 3
DIGIT
VIDEO
OUT
RIGHT
(REC)
CDR
(
VIDEO
VCR
L
4
A
IN
Y)
DIGIT
AL
(PLA
UBWOOFER
OUT
DOLBY DIGI
LEFT
AUDIO
/
/
PCM
DTS
AL IN
DIGIT
TV
SOUND
/DBS
RIGHT
AL/PCM
AM antenna connection
/DTS
DOLBY DIGIT
AL OUT
DIGIT
Connect the supplied AM loop antenna to the AM LOOP
terminals.
Turn the loop until you have the best reception.
• If the reception is poor, connect an outdoor single vinyl-
covered wire (not supplied) to the AM EXT terminal. (Keep the
AM loop antenna connected.)
Notes:
FM antenna connection
• If the AM loop antenna wire is covered with vinyl,
remove the vinyl while twisting it as shown to the
right.
• Make sure the antenna conductors do not touch any
other terminals, connecting cords and power cord.
This could cause poor reception.
Connect the supplied FM antenna to the FM 75 Ω COAXIAL
terminal as temporary measure.
Extend the supplied FM antenna horizontally.
• If the reception is poor, connect an outdoor FM antenna (not
supplied). Before attaching a 75 Ω coaxial cable (with a
standard type connector), disconnect the supplied FM antenna.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
“NO” for the subwoofer, “LARGE” for the front speakers, and
“SMALL” for the center and rear speakers are initial settings. To
get best possible sound, change the subwoofer and speaker settings
to fit your listening conditions.
Connection diagram
FRONT
SPEAKERS
1
Connecting the Speakers
Speaker layout diagram
FRONT
SPEAKERS
1
2
+
+
Center
speaker
Right front
speaker
Left front
speaker
–
–
Subwoofer
R
X
-
7
0
2
0
V
A
U
D
I
O
/
V
I
D
E
O
C
O
N
T
R
O
L
R
E
C
E
I
V
E
R
F
M
/
A
M
T
U
N
I
N
G
F
M
/
A
M
P
R
E
S
E
T
FM MODE
MEMORY
COMPULINK
Remote
STANDBY
M
A
S
T
E
R
V
O
L
U
M
E
D
S
I
G
I
T
A
L
U
R
R
O
U
N
D
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
INPUT
B
A
S
S
B
O
O
S
T
A
D
J
U
S
T
S
E
T
T
I
N
G
D
V
D
M
U
L
T
I
DVD
VCR
TV SOUND/DBS
SOURCE NAME
I
N
P
U
T
A
T
T
RIGHT
LEFT
CONTROL
DOWN UP
S
P
E
A
K
E
R
S
O
N
/
O
F
F
1
2
CD
TAPE/CDR
PHONO
FM/AM
S
O
U
R
C
E
N
A
M
E
PHONES
RIGHT
LEFT
Left rear
speaker
Right rear
speaker
FRONT
SPEAKERS
2
After connecting the front, center, rear speakers and/or subwoofer,
set the speaker setting information properly to obtain the best
possible Surround effects. For details, see pages 16 to 18.
Connecting speakers to the FRONT SPEAKERS 1 terminals
CAUTION:
1
2
3
4
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
1
1
1
RIGHT
RIGHT
RIGHT
Connecting the front speakers
You can connect two pairs of front speakers (one pair to the FRONT
SPEAKERS 1 terminals, and the other pair to the FRONT
SPEAKERS 2 terminals).
For each speaker , connect the (+) and (–) terminals on the rear
panel to the (+) and (–) terminals marked on the speakers.
About the speaker impedance
1 Cut, twist and remove the insulation at the end of
The required speaker impedance of the front speakers does differ
depending on whether both the FRONT SPEAKERS 1 and FRONT
SPEAKERS 2 terminals are used or only one of them is used.
each speaker signal cable (not supplied).
2 Turn the knob counterclockwise.
3 Insert the speaker signal cable.
4 Turn the knob clockwise.
CASE 1 When you connect only one pair of front speakers
Front
speaker
1
Front
speaker
1
Connecting speakers to the FRONT SPEAKERS 2 terminals
2
3
1
1
2
Use front speakers with 8 Ω – 16 Ω impedance.
CASE 2 When you connect two pairs of front speakers
Front
speaker
2
Front
speaker
2
For each speaker, connect the (+) and (–) terminals on the rear panel
to the (+) and (–) terminals marked on the speakers.
Front
speaker
1
Front
speaker
1
1 Cut, twist and remove the insulation at the end of
each speaker cord.
2 Open the terminal (1), then insert the speaker
cord (2).
3 Close the terminal.
Use front speakers with 16 Ω – 32 Ω impedance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the rear and center speakers
Connecting Audio/Video Components
Connect rear speakers to the REAR SPEAKERS terminals and a
center speaker to the CENTER SPEAKER terminals.
Turn the power off to all components before connections.
You can connect the following audio/video components to this unit.
Refer also to the manuals supplied with your components.
Center
speaker
Audio Components
• Turntable
Video Components
• VCR
• TV*
or DBS tuner*
• DVD player*
CENTER
SPEAKER
REAR
SPEAKERS
• CD player*
• Cassette deck
or CD recorder*
+
Left rear
speaker
Right rear
speaker
* You can connect these components using the methods described in
“Analog connections” (below) or in “Digital connections” (see page 9).
–
Analog connections
RIGHT
LEFT
Audio component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
CAUTION:
4
1
2
3
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
1
1
1
RIGHT
RIGHT
RIGHT
Turntable
For each speaker , connect the (+) and (–) terminals on the rear
panel to the (+) and (–) terminals marked on the speakers.
If an earth cable is provided for your
turntable, connect the cable to the
AM LOOP(H) terminal on the rear
panel.
1 Cut, twist and remove the insulation at the end of
each speaker signal cable (not supplied).
2 Turn the knob counterclockwise.
3 Insert the speaker signal cable.
4 Turn the knob clockwise.
Turntable
PHONO
Connecting the subwoofer speaker
CD
By connecting a subwoofer, you can enhance the bass or reproduce
the original LFE signals recorded in the digital software.
To audio
output
OUT
(REC)
TAPE
CDR
AUDIO
RIGHT
LEFT
IN
(PLAY)
FRONT
Powered subwoofer
OUT
Ex.: This connection is for the
turntable with an MM (moving-
magnet) type cartridge.
(REC)
DVD
VCR
SUB
CENTER
IN
WOOFER
(PLAY)
REAR
TV
SOUND
DBS
RIGHT
LEFT
RIGHT
LEFT
AUDIO
Note:
SUBWOOFER
OUT
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil) type must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).
• Refer also to the manual supplied for your subwoofer.
Since bass sound is non-directional, you can place a
subwoofer wherever you like. Normally place it in front of
you.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Video component connections
CD player
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
• If video components have S-video (Y/C-separation) and/or
component video (Y, PB/CB, PR/CR) terminals, connect them using
an S-video cable (not supplied) and/or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order — Component video > S-video > Composite
video.
PHONO
CD
CD player
OUT
(REC)
TAPE
CDR
To audio output
IN
(PLAY)
OUT
(REC)
VCR
IN
(PLAY)
IMPORTANT:
TV
SOUND
DBS
This unit is equipped with the following video terminals ; composite
video, S-video and component video terminals.You can use any of
these three to connect a video component.
RIGHT
LEFT
AUDIO
However, remember that the video signals from one type of these
input terminals are output only through the video output
terminals of the same type.
Therefore, if a recording video component and a playing video
component are connected to the unit through the different types of
video terminals, you cannot record the picture from the playing
component onto the recording component. In addition, if the TV and a
playing video component are connected to the unit through the
different types of video terminals, you cannot view the playback
picture from the playing component on the TV.
Cassette deck or CD recorder
Cassette deck
To audio input
To audio output
PHONO
CD
VCR
OUT
(REC)
S-VHS (or VHS) VCR
C
D
TAPE
CDR
A
IN
(PLAY)
B
OUT
E
F
(REC)
VCR
IN
PHONO
CD
(PLAY)
TV
SOUND
DBS
MONITOR
OUT
RIGHT
LEFT
OUT
AUDIO
(REC)
AUDIO
RIGHT
LEFT
TAPE
CDR
FRONT
DVD
IN
(PLAY)
DVD
OUT
To audio output
OUT
To audio input
SUB
WOOFER
CENTER
(REC)
(REC)
CD recorder
VCR
VCR
REAR
IN
IN
(PLAY)
(PLAY)
RIGHT
LEFT
TV
SOUND
DBS
DBS
Note:
S-VIDEO
VIDEO
RIGHT
LEFT
VIDEO
SUBWOOFER
OUT
You can connect either a cassette deck or a CD recorder to the TAPE/
CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks,
change the source name, which will be shown on the display when
selected as the source. See page 11 for details.
AUDIO
Å To left/right channel audio output
ı To left/right channel audio input
Ç To composite video output
Î To S-video output
If your audio components have a COMPU LINK jack
See also page 31 for detailed information about the connection and
the COMPU LINK remote control system.
‰ To S-video input
Ï To composite video input
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
DVD player
TV and/or DBS tuner
• When you connect the DVD player with stereo output jacks:
PHONO
Y
PB/CB
PR/CR
COMPONENT VIDEO
MONITOR OUT
DVD player
D
CD
DVD
MONITOR
OUT
DVD
DBS
OUT
AUDIO
RIGHT LEFT
C
(REC)
TAPE
CDR
B
A
FRONT
IN
DVD
(PLAY)
DVD
SUB
WOOFER
OUT
CENTER
OUT
(REC)
(REC)
VCR
VCR
Y
PB/CB
PR/CR
COMPONENT VIDEO
MONITOR OUT
REAR
IN
IN
(PLAY)
(PLAY)
RIGHT
LEFT
TV
SOUND
DBS
MONITOR
OUT
DVD
DBS
DBS
AUDIO
RIGHT
LEFT
SUBWOOFER
OUT
S-VIDEO
VIDEO
VIDEO
RIGHT
LEFT
AUDIO
DVD
FRONT
DVD
OUT
SUB
CENTER
(REC)
WOOFER
VCR
REAR
B
C
IN
(PLAY)
TV
RIGHT
LEFT
DBS
S-VIDEO
VIDEO
A
D
VIDEO
SUBWOOFER
OUT
Å To front left/right channel audio output
ı To composite video output
Ç To S-video output
Å To audio output
ı To composite video input
Ç To S-video input
Î To component video output
Î To component video input
Y
PB/CB
PR/CR
• When you connect the DVD player with its analog discrete output
(5.1 CH reproduction) jacks:
COMPONENT VIDEO
MONITOR OUT
PHONO
CD
MONITOR
OUT
DVD
DBS
OUT
AUDIO
RIGHT
DVD player
(REC)
G
A
TAPE
CDR
LEFT
DVD
IN
FRONT
DVD
(PLAY)
DVD
OUT
E
F
(REC)
OUT
SUB
CENTER
(REC)
WOOFER
VCR
VCR
B
C
D
IN
REAR
(PLAY)
IN
(PLAY)
RIGHT
LEFT
TV
SOUND
DBS
DBS
Y
PB/CB
PR/CR
COMPONENT VIDEO
MONITOR OUT
S-VIDEO
VIDEO
VIDEO
RIGHT
LEFT
SUBWOOFER
OUT
AUDIO
MONITOR
OUT
DVD
DBS
AUDIO
RIGHT LEFT
B
DVD
FRONT
DBS tuner
A
DVD
OUT
DBS
SUB
WOOFER
CENTER
(REC)
C
VCR
REAR
IN
(PLAY)
D
RIGHT
LEFT
DBS
S-VIDEO
VIDEO
VIDEO
SUBWOOFER
OUT
Å To audio output
ı To composite video output
Ç To S-video output
Î To component video output
Å To rear left/right channel audio output
ı To subwoofer audio output
Ç To front left/right channel audio output
Î To center channel audio output
‰ To composite video output
Ï To S-video output
Notes:
• When connecting the DBS tuner to the TV SOUND/DBS jacks,
change the source name, which will be shown on the display when
selected as the source, to “DBS.” See page 11 for details.
• When operating the DBS tuner by using the AV COMPU LINK
remote control system, change the video input terminal setting
correctly. See pages 11 and 32 for details.
Ì To component video output
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Digital connections
• When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For CD player
– DIGITAL 3 (optical): For digital TV broadcast tuner
– DIGITAL 4 (optical): For CD recorder
• When you want to operate the CD player or CD recorder using the
COMPU LINK remote control system, connect the target
component also as described in “Analog connections” (see page 7).
• When you want to operate the DVD player using the AV COMPU
LINK remote control system, connect the DVD player also as
described in “Analog connections” (see page 8).
This receiver is equipped with four DIGITAL IN terminals — one
digital coaxial terminal and three digital optical terminals, and one
DIGITAL OUT terminal.
You can connect any digital equipments such as — :
• DBS tuner,
• Digital TV broadcast tuner,
• DVD player,
• CD player, and
• CD recorder.
IMPORTANT:
• When connecting the DVD player, digital TV broadcast tuner or DBS
tuner using the digital terminals, you also need to connect it to the
video jack on the rear. Without connecting it to the video jack, you
can view no playback picture.
• After connecting the components using the DIGITAL IN terminals,
set the following correctly if necessary:
– Set the digital input (DIGITAL IN) terminal setting correctly. For
details, see “Setting the Digital Input (DIGITAL IN) Terminals” on
page 14.
Digital output terminal
This terminal can output the same type of incoming signals Dolby
Digital, Linear PCM, and DTS.
CD recorder, etc.
– Select the digital input mode correctly. For details, see “Selecting
the Analog or Digital Input Mode” on page 15.
Digital input terminals
Digital optical cable (not supplied)
between digital optical terminals
Digital TV
DBS tuner
DBS
DVD player
When the digital recording
DVD
equipment such as a CD recorder
has a digital optical input terminal,
connect it to the DIGITAL OUT
terminal enables you to perform
CD player
CD recorder
DOLBY DIGITAL/PCM
digital-to-digital recording.
/DTS
DIGITAL OUT
Digital coaxial cable (not supplied)
between digital coaxial terminals
Connecting the Power Cord
Digital optical cable (not supplied)
between digital optical terminals
Before plugging the receiver into an AC outlet, make sure that all
connections have been made.
Plug the power cord into an AC outlet.
When the component has a digital
coaxial output terminal, connect it to the
DIGITAL 1 (DVD) terminal, using the
digital coaxial cable (not supplied).
DIGITAL 1
(DVD)
When the component has a digital
optical output terminal, connect it to the
DIGITAL 2 (CD), DIGITAL 3 (TV), or
DIGITAL 4 (CDR) terminal, using the
digital optical cable (not supplied).
DIGITAL 2 ( CD )
DIGITAL 3 ( TV )
DIGITAL 4 (CDR)
Keep the power cord away from the connecting cables and the
antenna. The power cord may cause noise or screen interference. We
recommend that you use a coaxial cable to connect the antenna,
since it is well-shielded against interference.
Before connecting a digital
optical cable, unplug the
protective plug.
DOLBY DIGITAL
CAUTIONS:
/PCM
/DTS
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord. When
unplugging the cord, always grasp the plug so as not to damage
the cord.
DIGITAL IN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Front Panel
Remote Control
STANDBY lamp
Display
A/V CONTROL RECEIVER
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
FM/AM TUNING
FM/AM PRESET
FM MODE
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
DIGITAL AUTO
STANDBY
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
CATV/DBS
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
Source
Selecting
MEMORY
S.WFR LFE
LINEAR PCM
DIGITAL
MASTER VOLUME
AUDIO
SLEEP
LS
S
RS
DVD
CD
STANDBY/ON
CH-
TV/DBS
TAPE/CDR PHONO
BASS
TREBLE
Buttons
−
+
−
+
INPUT
SURROUND ON/OFF
ANALOG/DIGITAL
BASS BOOST
SURROUND
ON/OFF
SURROUND ANALOG/DIGITAL SLEEP
ADJUST SETTING
MODE
INPUT
DVD MULTI
DVD
VCR
TV UND/DBS
SOURCE NAME
INPUT ATT
BASS BOOST EFFECT
–
CENTER +
1
TEST
2
–
3
CONTROL
DOWN UP
MENU
REAR • L +
SURROUND MODE
SPEAKERS ON/OFF
SOUND
1
2
CD
TAPE/CDR
PHONO
FM/AM
4
5
6
ENTER
DIMMER
MUTING
–
REAR • R +
DIMMER
MUTING
SOURCE NAME
7/P
8
9
–SUBWOOFER +
PHONES
10
RETURN
0
+10
100
+
FM MODE
CATV/DBS
CONTROL
+
+
+
VOLUME
CH
TV VOL
VOLUME
TV/VIDEO
−
−
−
+/–
+
/REW
FF/
TUNING
Source
Selecting
Buttons
MASTER
VOLUME
−
PHONES
jack
SOURCE
NAME
SPEAKERS
ON/OFF
REC
PAUSE
CONTROL
RM-SRX7020J REMOTE CONTROL
STANDBY/ON
Turning On the Power
Selecting the Source to Play
Press STANDBY/ON
(or AUDIO
on the remote control).
Press one of the Source Selecting Buttons. The selected source name
appears on the display.
STANDBY
AUDIO
DVD
DVD MULTI
VCR
CD
FM/AM
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
STANDBY/ON
TV/DBS
TAPE/CDR PHONO
CD
TAPE/CDR
PHONO
FM/AM
On the front panel
From the remote control
SOURCE NAME
The STANDBY lamp goes off. The name of the current source (or
station frequency) appears on the display.
On the front panel
From the remote control
Current source name appears
DVD MULTI : Select the DVD player for viewing the digital video
disc using the analog discrete output mode (5.1 CH
reproduction).
SPK
1
ANALOG
L
C
R
VOLUME
S.WFR LFE
LS
S
RS
CH-
To enjoy the DVD MULTI playback, see page 30.
DVD
VCR
: Select the DVD player.
: Select the VCR.
Current volume level is shown here
TV SOUND/DBS
: Select the TV sound (or the DBS tuner).
: Select the CD player.
TAPE/CDR * : Select the cassette deck (or the CD recorder).
To turn off the power (into standby mode)
STANDBY
Press STANDBY/ON
(or AUDIO
on
CD *
the remote control) again.
The STANDBY lamp lights up.
STANDBY/ON
PHONO *
FM/AM *
: Select the turntable.
: Select an FM or AM broadcast.
•Each time you press the button, the band
alternates between FM and AM.
Note:
Notes:
A small amount of power is consumed in standby mode. To turn the
power off completely, unplug the AC power cord.
• When connecting a CD recorder (to the TAPE/CDR jacks) or a DBS
tuner (to the TV SOUND/DBS jacks), change the source name that
appears on the display. See “Changing the source name” on page
11.
• When you have connected some digital source components using
the digital terminals (see page 9), you need to select the digital
input mode (see page 15).
• When you press one of the source selecting buttons on the remote
control marked above with asterisks (*), the receiver automatically
turns on.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Volume
Changing the source name
Remote
NOT
When you have connected a CD recorder to the
TAPE/CDR jacks or the DBS tuner to the TV
SOUND/DBS jacks on the rear panel, change the
source name which will be shown on the display.
On the front panel:
To increase the volume,
turn MASTER VOLUME clockwise.
To decrease the volume,
MASTER VOLUME
turn it counterclockwise.
When changing the source name from “TAPE” to “CDR”:
1 Press TAPE/CDR (SOURCE NAME)
TAPE/CDR
SOURCE NAME
to select “TAPE” as the source.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
+
VOLUME
2 Press and hold SOURCE NAME
−
TAPE/CDR
(TAPE/CDR) to assign “CDR.”
SOURCE NAME
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
When changing the source name from “TV SOUND” to “DBS”:
1 Press TV SOUND/DBS (SOURCE
TV SOUND/DBS
Note:
SOURCE NAME
NAME) to select “TV SOUND” as
The volume level can be adjusted within the range of “0” (minimum) to
“50” (maximum).
the source.
2 Press and hold SOURCE NAME
TV SOUND/DBS
SOURCE NAME
(TV SOUND/DBS) to assign “DBS.”
Remote
NOT
Selecting the Front Speakers
To change the source name to “TAPE” or “TV SOUND,” repeat
the same procedure above.
When you have connected two pairs of the front speakers, you can
select which to use.
Notes:
SPEAKERS ON/OFF
• To watch the picture from DBS tuner, change the source name to
“DBS.” If “TV SOUND” is selected, you cannot watch the picture
from DBS tuner.
1
2
• Without changing the source name, you can still use the connected
components. However, there may be some inconvenience.
– “TAPE” or “TV SOUND” will appear on the display when you
select the CD recorder or DBS tuner.
– You cannot use the digital input (see page 15) for the CD
recorder.
To use the speakers connected to the FRONT SPEAKERS 1
terminals, press SPEAKERS ON/OFF 1 so that the SPK 1 indicator
lights up on the display. (Make sure that the SPK 2 is not lit on the
display.)
To use the speakers connected to the FRONT SPEAKERS 2
terminals, press SPEAKERS ON/OFF 2 so that the SPK 2 indicator
lights up on the display. (Make sure that the SPK 1 is not lit on the
display.)
– You cannot use the COMPU LINK remote control system (see
page 31) to operate the CD recorder.
To use both sets of the speakers, press SPEAKERS ON/OFF 1 and 2
so that the SPK 1 and SPK 2 indicators light up on the display.
To use neither sets of the speakers, press SPEAKERS ON/OFF
1 and 2 so that the SPK 1 and SPK 2 indicators disappear from the
Selecting different sources for picture and sound
You can watch picture from a video component while listening to
sound from another component.
display.
Press one of the audio source selecting buttons —
CD, TAPE/CDR, PHONO, FM/AM, while watching the picture
from a video component such as the VCR, DVD player, or DBS
tuner, etc.
Notes:
• If you select any of the Surround modes while using both the speakers
connected to the FRONT SPEAKERS 1 and 2 terminals, the
speakers connected to the FRONT SPEAKERS 2 terminals are
deactivated.
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
DVD
DVD MULTI
VCR
CD
FM/AM
TV/DBS
TAPE/CDR PHONO
CD
TAPE/CDR
PHONO
FM/AM
• While the surround mode is in use, you can only select either the
speakers connected to the FRONT SPEAKERS 1 or 2 terminals.
• If you select the source to DVD MULTI while using both the speakers
connected to the FRONT SPEAKERS 1 and 2 terminals, the
speakers connected to the FRONT SPEAKERS 2 terminals are
deactivated.
• When selecting “DVD MULTI” as the source, you can only select
either the speakers connected to the FRONT SPEAKERS 1 or 2
terminals.
SOURCE NAME
From the remote control
On the front panel
Notes:
• Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
• This function can use only when selecting the S-video or composite
video input terminal.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Listening Only with Headphones
Changing the Display Brightness
You must turn off both pairs of speakers when you listen with
headphones.
You can dim the display.
DIMMER
Press DIMMER on the remote control.
• Each time you press the button, the display dims and
brightens alternately.
1 Connect a pair of headphones to the PHONES jack on the front
panel.
2 Press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2 so
that neither the SPK 1 nor SPK 2 indicator appears on the
display.
• “HEADPHONE” appears and H. PHONE indicator lights up
on the display.
Turning Off the Power
with the Sleep Timer
ANALOG
L
R
H.PHONE
You can fall asleep while listening to music—Sleep Timer.
SLEEP
Press SLEEP on the remote control repeatedly.
• The SLEEP indicator lights up on the display, and the
shut-off time changes in 10 minutes intervals.
This cancels the Surround modes currently selected, and
activates the HEADPHONE mode (see below).
HEADPHONE mode
When using the headphones, following signals are output
SPK
1
SLEEP
ANALOG
L
C
R
S.WFR LFE
LS
S
RS
regardless of your speaker setting:
CH-
— For 2 channel sources, the front left, right channel signals are
output directly from the headphones.
— For multichannel sources, the front left and right, center, and
rear channel signals are down-mixed and then output from the
headphones.
10
20
30
40
90
50
80
60
70
(Canceled)
0
You can enjoy multichannel sound sources using the
headphones.
When the shut-off time comes
The receiver turns off automatically.
Notes:
• While in the HEADPHONE mode, you cannot use any Surround
modes (see page 23).
• Activating the speakers cancel the HEADPHONE mode and turns
on the Surround modes previously selected.
To check or change the remaining time until the shut-off time
Press SLEEP once.
The remaining time (in minutes) until the shut-off time appears.
• To change the shut-off time, press SLEEP repeatedly.
CAUTION:
To cancel the Sleep Timer
Press SLEEP repeatedly until “SLEEP 0 MIN” appears on the
display. (The SLEEP indicator goes off.)
Be sure to turn down the volume
• Before connecting or putting on headphones, as high volume can
damage both the headphones and your hearing.
• Before turning on speakers again, as high volume may output from
the speakers.
• Turning off the power also cancels the Sleep Timer.
Turning Off the Sounds
Temporarily—Muting
You can turn off the volume temporarily.
MUTING
Press MUTING on the remote control to mute
the sound through all speakers and headphones
connected.
• “MUTING” appears on the display and the volume turns off (the
volume level indicator goes off).
SPK
1
ANALOG
L
C
R
S.WFR LFE
LS
S
RS
CH-
To restore the sound, press MUTING again.
• Turning MASTER VOLUME on the front panel or pressing
VOLUME +/– on the remote control also restores the sound.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment auto memory
This receiver memorizes sound settings for each source when—:
• you turn off the power,
• you change the source, and
• you assign the source name.
Signal and speaker indicators on the display
Signal indicators
Speaker indicators
SPK
1
ONETO
PR
ANALOG
DIGITAL AUTO
L
C
R
L
C
R
L
C
R
S.WFR LFE
LINEAR PCM
DIGITAL
LS
S
RS
S.WFR LFE
LS RS
S.WFR LFE
LS RS
CH-
When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Input attenuator mode (see page 19)
• Balance (see page 19)
S
S
The following signal indicators light up—:
L
: •When digital input is selected: Lights up when the left
channel signal comes in.
• Tone adjustment (see page 20)
•When analog input is selected: Always lights up.
: •When digital input is selected: Lights up when the right
channel signal comes in.
•When analog input is selected: Always lights up.
: When the center channel signal comes in.
• Subwoofer output level (see page 20)
• Surround mode selection (see pages 26 – 29)
• BASS BOOST (see page 20)
R
C
Notes:
LS : When the left rear channel signal comes in.
RS : When the right rear channel signal comes in.
: When the monaural rear channel signal or 2 ch Dolby
Digital Surround encoded signal comes in.
LFE: When the LFE channel signal comes in.
• You cannot assign and store different settings for digital input
mode and analog input mode.
• If the source is FM or AM, you can assign a different setting for
each band.
S
For recording
The speaker indicators light up when—:
For analog-to-analog recording
• The corresponding speaker is activated, and
You can record any analog source through the receiver to —:
• the cassette deck (or CD recorder) connected to the TAPE/CDR
jacks, and
• The corresponding speaker is required for the current playback.
Notes:
• the VCR connected to the VCR jacks at the same time.
• When you select “DVD MULTI,” all the signal indicators except “S”
light up.
For digital-to-digital recording
• When “SUBWOOFER” is set to “YES” (see page 16),
lights up.
S.WFR
You can record the currently selected digital input through the
receiver to a digital recording device connected to the DIGITAL
OUT terminal.
Notes:
• Analog-to-digital and digital-to-analog recordings are not
possible.
• The output volume level, bass boost (see page 20), tone
adjustment (see page 20), and Surround modes (see page 23)
cannot affect the recording.
• The test tone signal (see pages 26 and 27) does not come out
through the DIGITAL OUT terminal.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Settings
Front Panel
Remote Control
Display
SETTING
A/V CONTROL RECEIVER
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
Source
Selecting
Buttons
CATV/DBS
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
FM/AM TUNING
FM/AM PRESET
FM MODE
MEMORY
DVD
CD
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
DIGITAL AUTO
STANDBY
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
S.WFR LFE
TV/DBS
TAPE/CDR PHONO
LINEAR PCM
DIGITAL
MASTER VOLUME
LS
S
RS
STANDBY/ON
CH-
BASS
TREBLE
ANALOG/
DIGITAL
INPUT
−
+
−
+
SURROUND
ON/OFF
SURROUND ANALOG/DIGITAL SLEEP
MODE INP
BASS BOOST EFFECT
–
CENTER +
INPUT
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
1
2
–
3
MENU
REAR • L +
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
SOUND
TEST
INPUT ATT
4
5
6
ENTER
DIMMER
MUTING
–
REAR • R +
CONTROL
DOWN
UP
SPEAKERS ON/OFF
7/P
8
9
1
2
CD
TAPE/CDR
PHONO
FM/AM
–SUBWOOFER +
10
RETURN
0
+10
100
+
SOURCE NAME
FM MODE
CATV/DBS
CONTROL
PHONES
+
+
+
CH
TV VOL
VOLUME
TV/VIDEO
−
−
−
+
/REW
FF/
TUNING
−
REC
PAUSE
Source
Selecting
Buttons
INPUT
ANALOG/DIGITAL
CONTROL
RM-SRX7020J REMOTE CONTROL
CONTROL
UP 5/DOWN ∞
Setting the Digital Input
[DIGITAL IN] Terminals
When the DIGITAL 1 terminal is set, the DIGITAL 2/3/4
terminals are set automatically as follows:
Remote
NOT
When the DIGITAL 1 is set to “DVD”
When you use the digital input terminals, you have to register what
components are connected to which terminals (DIGITAL IN 1/2/3/4).
2 CD 3 TV (or DBS*) 4 CDR
When the DIGITAL 1 is set to “CD”
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
2 DVD 3 TV (or DBS*) 4 CDR
When the DIGITAL 1 is set to “TV” or “DBS”
2 DVD 3 CD 4 CDR
To set the DIGITAL 1 terminal
T
SETTING
1 Press SETTING repeatedly until
“COAX DIGI IN” appears on the
display.
When the DIGITAL 1 is set to “CDR”
2 DVD 3 CD 4 TV (or DBS*)
* If you have changed the source name from “TV SOUND” to
“DBS,” “DBS” appears (see page 11).
SPK
1
L
C
R
DIGITAL AUTO
S.WFR LFE
LS
S
RS
Press SETTING repeatedly until “ OPT DIGI IN” appears on the
CH-
display.
After 2 seconds, the display changes to show the current setting.
After 2 seconds, the display changes to show the current setting.
SPK
1
L
C
R
DIGITAL AUTO
DIGITAL 3 terminal setting
S.WFR LFE
LS
S
RS
CH-
CONTROL
DOWN UP
2 Press CONTROL UP 5/DOWN ∞
to select the appropriate digital
terminal setting.
DIGITAL 2 terminal setting
DIGITAL 4 terminal setting
• Each time you press the button, the display
changes as follows:
Notes:
• When shipped from the factory, the DIGITAL IN terminals can be
used as the digital input for the following components:
– DIGITAL 1 (coaxial): For DVD player
1 DVD j 1 CD j 1 TV (or 1 DBS*) j 1 CDR j
(back to the beginning)
– DIGITAL 2 (optical): For CD player
– DIGITAL 3 (optical): For TV
– DIGITAL 4 (optical): For CDR
• When using the DIGITAL 4 terminal for the CD recorder, you need
to select “CDR” as the source name. (See page 11.)
* If you have changed the source name from “TV SOUND” to
“DBS,” “DBS” appears (see page 11).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
If the following symptoms occur while playing Dolby Digital
or DTS Digital Surround software with “DIGITAL AUTO”
selected, follow the procedure below:
Selecting the Analog or Digital Input
Mode
• Sound does not come out at the beginning of playback.
• Noise comes out while searching or skipping chapters or
tracks.
When you have connected digital source components using both the
analog connection (see page 6) and the digital connection (see page
9) methods, you need to select the input mode correctly.
1 Press INPUT ANALOG/DIGITAL (or
ANALOG/ DIGITAL INPUT on the remote
control.)
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
INPUT
ANALOG / DIGITAL
ANALOG/DIGITAL
1 Press one of the source selecting buttons—DVD,
TV SOUND/DBS (TV/DBS on the remote
control), CD, or TAPE/CDR*—for which you
want to change the input mode.
INPUT
INPUT ATT
On the front panel
From the remote control
DVD
DVD MULTI
CD
FM/AM
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
2 Press CONTROL UP 5/DOWN ∞ to
select “DOLBY DIGITAL” or “DTS
SURROUND” while “DIGITAL
TV/DBS
VCR
TAPE/CDR PHONO
Remote
NOT
CD
TAPE/CDR
PHONO
FM/AM
SOURCE NAME
AUTO” still remains on the display.
• Each time you press the button, the digital input mode changes
as follows:
From the remote control
On the front panel
Note:
When “DOLBY DIGITAL” or “DTS SURROUND”
is selected, “DIGITAL AUTO” goes off.
* Among the sources listed above, you can select the digital input
only for the sources which you have selected the digital input
terminals for. (See “Setting the Digital Input (DIGITAL IN)
Terminals” on page 14.)
SPK
L
C
R
DIGITAL AUTO
DIGITAL
S.WFR LFE
LS
S
RS
CH-
DIGITAL AUTO
DOLBY DIGITAL
DTS SURROUND
2 Press INPUT ANALOG/DIGITAL
(or ANALOG/DIGITAL INPUT on the remote
control) to select the digital input mode.
• To play back software encoded with Dolby Digital, select
“DOLBY DIGITAL.”
• To play back software encoded with DTS Digital Surround,
select “DTS SURROUND.”
INPUT
ANALOG / DIGITAL
ANALOG/DIGITAL
INPUT
INPUT ATT
Note:
On the front panel
From the remote control
When you turn off the power or select another source, “DOLBY
DIGITAL” and “DTS SURROUND” are canceled and the digital input
mode is automatically reset to “DIGITAL AUTO.”
• Each time you press the button, the input mode alternates
between the analog input (“ANALOG”) and the digital input
(“DIGITAL AUTO”).
The followings are the analog/digital signal indicators on the display
to indicate what type of the signal comes into the receiver.
DIGITAL AUTO : Select this for the digital input mode. The
receiver automatically detects the
incoming signal format. (The DIGITAL
AUTO indicator lights up on the display,
then the digital signal indicator for the
detected signals lights up.)
ANALOG
: Lights when the analog input is selected.
LINEAR PCM : Lights when Linear PCM signals come in.
DIGITAL : • Lights when Dolby Digital signals come in.
• Flashes when “DOLBY DIGITAL” is
selected for software not encoded with Dolby
Digital signals.
ANALOG
: Select this for the analog input mode.
(Initial setting when shipped from the
factory.)
: • Lights when DTS signals come in.
• Flashes when “DTS SURROUND” is
selected for software not encoded with DTS
signals.
Note:
When “DIGITAL AUTO” cannot recognize the incoming signals, no
digital signal indicators light up on the display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Settings
“NO” for the subwoofer, “LARGE” for the front speakers, and
“SMALL” for the center and rear speakers are initial settings. To
get best possible sound, change the subwoofer and speaker settings
to fit your listening conditions.
Selecting the Video Input
Terminal
Remote
NOT
This receiver is equipped with the component video input terminals
for the DVD player and DBS tuner, which give you higher picture
quality. When you use the component video input terminals for the
DVD player and/or DBS tuner, change the video input terminal
setting.
Remote
Setting the Speaker Information
NOT
To obtain the best possible sound or effect from Surround modes
(see pages 26 to 29), register the following speakers and subwoofer
information after all connections are completed.
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
SSETTING
The followings are items you can set:
1 Press SETTING repeatedly until
• Subwoofer information—SUBWOOFER
• Speaker size—FRNT SP, CNTR SP, REAR SP
• Speaker distance—UNIT, FRNT DIS, CNTR DIS, REAR DIS
• Crossover frequency—CROSS
• Low frequency effect attenuator—LFE ATT
• Dynamic range compression—D. COMP
“VIDEO IN DVD ” or “VIDEO IN
DBS ” appears on the display.
• Select “VIDEO IN DVD” to select the video input terminal for
the DVD player and “VIDEO IN DBS” for the DBS tuner.
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
CH-
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
After 2 seconds, the display changes to show the current setting.
Subwoofer information
Register whether you have connected a subwoofer or not.
2 Press CONTROL UP 5/DOWN ∞
CONTROL
DOWN
UP
to select the appropriate type of
the video input terminal.
• Each time you press the button, the display
changes as follows:
SSETTING
1 Press SETTING repeatedly until
“SUBWOOFER” (with the current
setting)* appears on the display.
COMPONENT
(Component)
S/C
SPK
1
(S-video/Composite)
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
CH-
COMPONENT : Select this when you connect the DVD
player or DBS tuner to the component video
input terminals.
* “NO” is the initial setting. If you have already changed the
setting, “YES” will be shown.
S/C
: Select this when you connect the DVD player
or DBS tuner to the S-video or composite
video input terminal.
CONTROL
2 Press CONTROL UP 5/DOWN ∞ to
DOWN
UP
register whether you have connected
a subwoofer or not.
• Each time you press the button, the subwoofer
setting alternates between “YES” and “NO.”
Note:
Without changing the video input terminal setting, you can see the
picture through the video input terminals, but cannot use the AV
COMPU LINK remote control system correctly (see page 32).
YES
NO
: Select this when you have connected a subwoofer.
You can adjust the subwoofer output level
(see page 20).
: Select this when you have not connected or have
disconnected a subwoofer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
T
SETTING
Speaker size
1 Press SETTING repeatedly until
“UNIT” (with the current setting)*
appears on the display.
Register the sizes of all the connected speakers.
• When you change your speakers, register the information about
the speakers again.
SPK
1
L
C
R
SSETTING
DIGITAL AUTO
LINEAR PCM
1 Press SETTING repeatedly until
S.WFR LFE
LS
S
RS
CH-
“FRNT SP (Front Speaker)”, “CNTR
SP (Center Speaker)” or “REAR SP
(Rear Speaker)” (with the current setting)*
appears on the display.
*“METER” is the initial setting. If you have already changed the
setting, “FEET” will be shown.
CONTROL
2 Press CONTROL UP 5/DOWN ∞ to
DOWN
UP
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
select the unit.
S.WFR LFE
LS
S
RS
• Each time you press the button, the setting
alternates between “METER” and “FEET.”
CH-
* “LARGE” is the initial setting for the front speakers and
“SMALL” is for the center and rear speakers. If you have
already changed the setting, another size will be shown.
METER : Speaker distance is shown in meter.
FEET
: Speaker distance is shown in feet.
CONTROL
2 Press CONTROL UP 5/DOWN ∞ to
DOWN
UP
T
SETTING
select the appropriate item about the
3 Press SETTING repeatedly until
“FRNT DIS (Front distance),” “CNTR
DIS (Center distance)” or “REAR DIS
speaker selected in the above step.
• Each time you press the button, the display
changes as follows:
(Rear distance)” (with the current setting)*
appears on the display.
SMALL
LARGE
• The display shows the current setting in the unit selected in
step 2.
NONE
* “3.0m” is the initial setting for meter and “10FT” is for feet. If
you have already changed the setting, another value will be
shown.
LARGE : Select this when the speaker size is relatively large.
(See “Notes” on the below.)
4 Press CONTROL UP 5/DOWN ∞ to
CONTROL
SMALL : Select this when the speaker size is relatively small.
(See “Notes” on the below.)
DOWN
UP
select the appropriate speaker
distance.
NONE
: Select this when you have not connected a speaker.
(Not selectable for the front speakers)
• If you select “METER” in step 2, the value is
changed from “0.3m” to “9.0m” by 0.3 m step.
• If you select “FEET” in step 2, the value is changed from
“1FT” to “30FT” by 1 foot step.
3 Repeat steps 1 and 2 to select the appropriate
items for other speakers.
Left front
speaker
Right front
speaker
Center speaker
Notes:
• Keep the following comment in mind as reference when adjusting.
– If the size of the cone speaker unit built in your speaker is greater
than 12 cm (4 3/4 inches), select “LARGE,” and if it is smaller than
12 cm (4 3/4 inches), select “SMALL.”
• If you have selected “NO” for the subwoofer setting, you can only
select “LARGE” for the front speaker setting.
3.0 m
(10 feet)
2.7 m
(9 feet)
2.4 m
(8 feet)
2.1 m
(7 feet)
• If you have selected “SMALL” for the front speaker setting, you
cannot select “LARGE” for the center and rear speaker settings.
Left rear
speaker
Right rear
speaker
Speaker distance
Register the unit you use, then the speaker distance from your
listening point.
Example: In this case,
• If you have set the unit before, start from step 3.
• Speaker distance is not valid for the DVD MULTI playback mode.
set “FRNT DIS” to “3.0m” or “10FT,”
set “CNTR DIS” to “2.7m” or “9FT” and,
set “REAR DIS” to “2.4m” or “8FT.”
Note:
If you have selected “NONE” for the center and rear speakers setting,
you cannnot set the speaker distance for the center and rear
speakers.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Settings
CONTROL
DOWN UP
Crossover frequency
2 Press CONTROL UP 5/DOWN ∞ to
Small speakers cannot reproduce the bass sounds efficiently. If you
use a small speaker in any position, this receiver automatically
reallocates the bass sound elements assigned from small speaker to
large speakers.
To use this function properly, set this crossover frequency level
according to the size of the small speaker connected.
• If you have selected “LARGE” for all speakers, this function will
not take effect.
select the low frequency effect
attenuator level.
• Each time you press the button, the setting
alternates between “0dB” and “–10dB.”
0dB : Normally select this.
–10dB : Select this when the bass sound is distorted.
• Crossover frequency is not valid for the DVD MULTI playback
mode and HEADPHONE mode.
Dynamic range compression
You can compress the dynamic range (difference between maximum
sound and minimum sound) of the reproduced sound. This is useful
when enjoying surround sound at night.
• This function takes effect only when playing back a source
encoded with Dolby Digital.
T
SETTING
1 Press SETTING repeatedly until
“CROSS (Crossover)” (with the current
setting)* appears on the display.
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
LS
S
RS
1 Press SETTING repeatedly until
CH-
T
SETTING
“D. COMP (Dynamic range
compression)” (with the current setting)*
appears on the display.
* “100HZ” is the initial setting. If you have already changed the
setting, another frequency will be shown.
2 Press CONTROL UP 5/DOWN ∞ to
SPK
1
CONTROL
L
C
R
DIGITAL AUTO
LINEAR PCM
DOWN
UP
S.WFR LFE
select the crossover frequency level
LS
S
RS
CH-
you like to use.
• Each time you press the button, the crossover
frequency level changes as follows:
* “MID” is the initial setting. If you have already changed the
setting, another setting will be shown.
80HZ
200HZ
100HZ
120HZ
150HZ
CONTROL
2 Press CONTROL UP 5/DOWN ∞
DOWN
UP
to select the appropriate compression
level.
• Each time you press the button, the
display changes as follows:
Low frequency effect attenuator
If the bass sound is distorted while playing back software using
Dolby Digital or DTS Digital Surround, follow the procedure
below:
MID
OFF
MAX
• Low frequency effect attenuator is not valid for DVD MULTI
playback mode.
• This function takes effect only when the subwoofer (LFE) signals
come in (with “SUBWOOFER” set to “YES”).
OFF : Select this when you want to enjoy surround with its
full dynamic range. (No effect applied.)
MID : Select this when you want to reduce the dynamic range
a little.
MAX : Select this when you want to apply the compression
1 Press SETTING repeatedly until “LFET
SETTING
effect fully. (Useful at night.)
ATT (Low Frequency Effect
Attenuator)” (with the current
setting)* appears on the display.
SPK
1
L
C
R
DIGITAL AUTO
DIGITAL
S.WFR LFE
LS
S
RS
CH-
* “0dB” is the initial setting. If you have already changed the
setting, “–10dB” will be shown.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments
Remote Control
Front Panel
Display
A/V CONTROL RECEIVER
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
FM/AM TUNING
FM/AM PRESET
FM MODE
MEMORY
CATV/DBS
DVD
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
DIGITAL AUTO
STANDBY
CD
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
S.WFR LFE
LINEAR PCM
DIGITAL
MASTER VOLUME
LS
S
RS
TV/DBS
TAPE/CDR PHONO
BASS+/–
BASS
BOOST
STANDBY/ON
CH-
BASS
TREBLE
−
+
−
+
TREBLE+/–
SURROUND
ON/OFF
SURROUND ANALOG/DIGITAL SLEEP
MODE
INPUT
INPUT
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
BASS BOOST EFFECT
–
CENTER +
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
1
TEST
2
–
3
MENU
REAR • L +
INPUT ATT
SOUND
4
5
6
CONTROL
DOWN UP
ENTER
SPEAKERS ON/OFF
DIMMER
MUTING
–
REAR • R +
1
2
CD
TAPE/CDR
PHONO
FM/AM
7/P
8
9
SOUND
–SUBWOOFER +
SOURCE NAME
10
RETURN
0
+10
SUBWOOFER +/–
+
100
FM MODE
CATV/DBS
CONTROL
PHONES
+
+
+
CH
TV VOL
VOLUME
TV/VIDEO
−
−
−
+
/REW
FF/
TUNING
−
REC
PAUSE
BASS BOOST
ADJUST
INPUT ATT
CONTROL
CONTROL
UP 5/DOWN ∞
RM-SRX7020J REMOTE CONTROL
Once each of following settings has been adjusted, this receiver
memorizes the adjustment for each source.
Adjusting the Front Speakers
Output Balance
Remote
NOT
Remote
Attenuating the Input Signal
NOT
If the sounds you hear from the front right and left speakers are
unequal, you can adjust the speakers output balance.
When the input level of the analog source is too high, the sounds
will be distorted. If this happens, you need to attenuate the input
signal level to prevent the sound distortion.
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
INPUT
ANALOG / DIGITAL
ADJUST
1 Press and hold INPUT ATT
1 Press ADJUST repeatedly until
INPUT ATT
(INPUT ANALOG/DIGITAL) so
“BALANCE” (with the current
that the INPUT ATT indicator
lights up on the display.
setting)* appears on the display.
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
SPK
1
ANALOG
S.WFR LFE
L
C
R
INPUT ATT
LS
S
RS
S.WFR LFE
CH-
LS
S
RS
CH-
* “CNTR (Center)” is the initial setting. If you have already
• Each time you press and hold the button, the Input Attenuator
mode turns on (“INPUT ATT ON”) or off (“INPUT
NORMAL”).
changed the setting, another setting will be shown.
CONTROL
2 Press CONTROL UP 5/DOWN ∞
DOWN
UP
to adjust the balance.
Note:
When selecting “DVD MULTI” as the source, this effect does not work.
• Pressing CONTROL UP 5 decreases the
left channel output from “CNTR” (Center)
to “L–21.”
• Pressing CONTROL DOWN ∞ decreases
the right channel output from “CNTR” (Center) to “R–21.”
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments
Adjusting the Tone
Adjusting the Subwoofer Output Level
You can adjust the bass and treble sounds as you like.
You can adjust the subwoofer output level if you have connected a
subwoofer and set the subwoofer information correctly—“YES.”
On the front panel:
Before you start, remember....
On the front panel:
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1 Press ADJUST repeatedly until “BASS”
ADJUST
1 Press ADJUST repeatedly until
ADJUST
or “TREBLE” (with the current
“SUBWFR” (with the current setting)*
appears on the display.
setting)* appears on the display.
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
SPK
1
LS
S
RS
L
C
R
DIGITAL AUTO
LINEAR PCM
CH-
S.WFR LFE
LS
S
RS
CH-
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
BASS
: To adjust the bass.
CONTROL
2 Press CONTROL UP 5/DOWN ∞ to
DOWN
UP
TREBLE : To adjust the treble.
adjust the subwoofer output level
(–10 to +10).
CONTROL
DOWN UP
2 Press CONTROL UP 5/DOWN ∞ to
From the remote control:
adjust the bass or treble sounds level
SOUND
(–10 to +10).
• Each time you press the button, the sound
level changes by 2 steps.
1 Press SOUND.
The 10 keys are activated for sound adjustments.
– SUBWOOFER +
2 Press SUBWOOFER +/– to adjust
the subwoofer output level (–10 to
+10).
0
+10
100
From the remote control:
+
FM MODE
BASS
1 Press BASS +/– or TREBLE +/– to
−
−
+
+
adjust the bass or treble sounds
Note:
level (–10 to +10).
• Each time you press the button, the sound
level changes by 2 steps.
Subwoofer output level cannot be adjusted when using headphones.
TREBLE
Reinforcing the Bass
You can boost the bass level.
Press BASS BOOST on the front panel or on the
remote control to select the bass boost function.
BASS BOOST
BASS BOOST
On the front panel
From the remote control
• Each time you press the button, the bass boost function turns
on (“BASSBOOST ON”) and off (“BASSBOOST OFF”).
–Select “BASSBOOST ON” to activate the bass boost function.
The BASS BOOST indicator lights up on the display.
–Select “BASSBOOST OFF” to cancel it.
The indicator goes off.
Note:
This function affects the front speaker sounds only.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Front Panel
Remote Control
FM/AM
TUNING
5/∞
FM/AM
PRESET
5/∞ FM MODE
A/V CONTROL RECEIVER
Display
CATV/DBS
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
DVD
CD
FM/AM
10 keys
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
TV/DBS
TAPE/CDR PHONO
BASS
TREBLE
FM/AM TUNING
FM/AM PRESET
FM MODE
MEMORY
−
+
−
+
SURROUND
ON/OFF
SURROUND ANALOG/DIGITAL SLEEP
MODE INPUT
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
DIGITAL AUTO
STANDBY
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
S.WFR LFE
LINEAR PCM
DIGITAL
MASTER VOLUME
LS
S
RS
–
CENTER +
BASS BOOST EFFECT
STANDBY/ON
CH-
1
TEST
2
–
3
MENU
REAR • L +
SOUND
4
5
6
ENTER
REAR • R +
DIMMER
MUTING
–
7/P
8
9
INPUT
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
–SUBWOOFER +
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
10
RETURN
+10
INPUT ATT
+
FM MODE
100
CATV/DBS
CONTROL
FM MODE
CONTROL
DOWN UP
SPEAKERS ON/OFF
+
+
+
CH
TV VOL
VOLUME
1
2
CD
TAPE/CDR
PHONO
FM/AM
TV/VIDEO
−
−
−
SOURCE NAME
+
PHONES
/REW
FF/
TUNING
TUNING +/–
−
REC
PAUSE
CONTROL
RM-SRX7020J REMOTE CONTROL
MEMORY
FM/AM
Using Preset Tuning
Tuning in Stations Manually
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
1 Press FM/AM to select the band FM or AM.
The last received station of the selected band is tuned in.
FM/AM
FM/AM
To store the preset stations
Remote
NOT
Before you start, remember....
From the remote control
On the front panel
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
• Each time you press the button, the band alternates between
FM and AM.
1 Tune in the station you want to preset
TUNED STEREO
AUTO MUTING
VOLUME
SPK
1
ANALOG
L
C
R
(see “Tuning in Stations Manually”).
If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the FM
Reception Mode” on page 22.
S.WFR LFE
LS
S
RS
CH-
Ex.: When the FM band is selected
TUNED STEREO
AUTO MUTING
VOLUME
SPK
1
ANALOG
L
C
R
2 Press FM/AM TUNING 5/∞ (TUNING +/ – on
S.WFR LFE
LS
S
RS
CH-
the remote control) repeatedly until you find the
frequency you want.
• Pressing FM/AM TUNING 5 (TUNING + on the remote
control) increases the frequency.
• Pressing FM/AM TUNING ∞ (TUNING – on the remote
control) decreases the frequency.
MEMORY
2 Press MEMORY.
The CH- indicator lights up and the channel
number position starts flashing on the display for
about 5 seconds.
FM/AM TUNING
SPK
1
TUNED STEREO
AUTO MUTING
VOLUME
ANALOG
L
C
R
S.WFR LFE
+
LS
S
RS
CH-
TUNING
−
FM/AM PRESET
On the front panel
From the remote control
3 Press FM/AM PRESET 5/∞ to
select a channel number while the
channel number position is
flashing.
Notes:
• When you hold FM/AM TUNING 5/ ∞ in step 2, the frequency
keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
TUNED STEREO
AUTO MUTING
VOLUME
SPK
1
ANALOG
L
C
R
S.WFR LFE
LS
S
RS
• When an FM stereo program is received, the STEREO indicator
also lights up.
CH-
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
MEMORY
4 Press MEMORY again while the
selected channel number is flashing
on the display.
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station. (See
page 21).
The selected channel number stops flashing.
The station is assigned to the selected channel number.
TUNED STEREO
AUTO MUTING
VOLUME
SPK
1
ANALOG
L
C
R
S.WFR LFE
LS
S
RS
1 While listening to an FM station, press FM
CH-
MODE.
• Each time you press the button, the FM reception mode
alternates between “AUTO*” and “MONO.”
5 Repeat steps 1 to 4 until you store all the stations
you want.
FM MODE
–SUBWOOFER +
0
To erase a stored preset station
FM MODE
Storing a new station on a used number erases the previously stored
one.
On the front panel
From the remote control
TUNED STEREO
AUTO MUTING
SPK
1
ANALOG
To tune in a preset station
L
C
R
S.WFR LFE
LS
S
RS
On the front panel:
CH-
1 Press FM/AM to select the band
FM/AM
FM or AM.
The last received station of the selected band is
tuned in.
TUNED
SPK
1
R
ANALOG
L
C
S.WFR LFE
LS
S
RS
• Each time you press the button, the band
alternates between FM and AM.
CH-
* “AUTO” is the initial setting.
AUTO : Normally select this.
SPK
1
TUNED STEREO
AUTO MUTING
VOLUME
ANALOG
L
C
R
S.WFR LFE
LS
S
RS
CH-
When a program is broadcasted in stereo, you will
hear stereo sound; when in monaural, you will
hear monaural sounds. This mode is also useful to
suppress static noise between stations. The AUTO
MUTING indicator lights up on the display.
FM/AM PRESET
2 Press FM/AM PRESET 5/∞
repeatedly until you find the channel
you want.
• Pressing FM/AM PRESET 5 increases the
channel numbers.
• Pressing FM/AM PRESET ∞ decreases
the channel numbers.
MONO
: Select this to improve the reception (but stereo
effect will be lost).
In this mode, you will hear noise while tuning into
the stations. The AUTO MUTING indicator goes
off from the display. (The STEREO indicator also
goes off.)
From the remote control:
FM/AM
1 Press FM/AM to select the band
FM or AM.
The last received station of the selected band is
tuned in and the10 keys now work for tuner operation.
• Each time you press the button, the band
alternates between FM and AM.
2 Press 10 keys to select a preset
– CENTER +
EFFECT
1
TEST
2
3
MENU
channel number.
– REAR • L +
4
5
6
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
ENTER
– REAR • R +
7/P
8
9
–SUBWOOFER +
10
RETURN
0
+10
+
100
FM MODE
then 10.
Note:
When you use 10 keys on the remote control, be sure that they are
activated for the tuner, not for the CD and others. (See page 34).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
You can use the following Surround modes to reproduce a realistic
sound field:
Dolby Digital*
Used to reproduce multichannel sound tracks of the software
encoded with Dolby Digital ( ).
• To enjoy the software encoded with Dolby Digital, connect the
source component using the digital terminal on the rear of this
receiver. (See page 9.)
I Dolby Surround
• Dolby Pro Logic II
• Dolby Digital
I DTS Digital Surround
I DAP modes
D
I
G
I
T
A
L
I All Channel Stereo
Dolby Digital 5.1 ch encoding method (so-called discrete
multichannel digital audio format) records and digitally compresses
the left front channel, right front channel, center channel, left rear
channel, right rear channel, and LFE channel signals.
Since each channel is completely independent from the other
channel signals to avoid interference, you can obtain much better
sound quality with much stereo and surround effects.
I Dolby Surround
Dolby Pro Logic II*
Dolby Pro Logic II has a newly developed multichannel playback
format to decode all 2 channel sources—regular stereo source and
Dolby Surround encoded source—into 5.1 channel.
Matrix-based encoding/decoding method for Dolby Pro Logic II
makes no limitation for the cutoff frequency of the rear treble and
enables stereo rear sound compared to conventional Dolby Pro
Logic.
Note:
Dolby Digital software can be roughly grouped into two categories
—multichannel (up to “5.1” ch) and 2 channel software. To enjoy
surround sounds while playing Dolby Digital 2 ch software, you can
use Dolby Pro Logic II.
Dolby Pro Logic II enables to reproduce spacious sound from
original sound without adding any new sounds and tonal colorations.
Dolby Pro Logic II has two modes—Movie mode and Music mode:
I DTS Digital Surround**
Used to reproduce multichannel sound tracks of the software
encoded with DTS Digital Surround (
).
Pro Logic II Movie (PL II MOVIE)—suitable for reproduction of
• To enjoy the software encoded with DTS Digital Surround,
connect the source component using the digital terminal on the
rear of this receiver. (See page 9.)
DOLBY SURROUND
Dolby Surround encoded sources bearing the mark
.
You can enjoy soundfield very close to the one created with discrete
5.1 channel sounds.
Pro Logic II Music (PL II MUSIC)—suitable for reproduction of
any 2 channel stereo music sources. You can enjoy wide and deep
sound by using this mode. For this mode, Panorama control can be
selected, which gives “wraparound” sound effect with side-wall
image.
DTS Digital Surround is another discrete multichannel digital
audio format available on CD, LD, and DVD software.
Compared to Dolby Digital, audio compression ratio is relatively
low. This fact allows DTS Digital Surround format to add breadth
and depth to the reproduced sounds. As a result, DTS Digital
Surround features natural, solid and clear sound.
• When Dolby Pro Logic II is activated,
PRO LOGIC II
indicator lights up on the display.
Typical Multichannel (5.1 ch) reproduction
Center
speaker
Right front
speaker
Left front
speaker
Subwoofer
STANB
S
T
A
N
D
B
Y
O
N
DOLBY
D
I
G
I
T
A
L
R
X
-
7
0
2
0
V
A
U
D
I
O
/
V
I
D
E
O
C
O
N
T
R
O
L
R
E
C
E
I
V
E
R
F
M
/
A
M
T
U
N
I
N
G
F
M
/
A
M
P
R
E
S
E
T
FM MODE
MEMORY
COMPULINK
Remote
STANDBY
M
A
S
T
E
R
V
O
L
U
M
E
D
S
I
G
I
T
A
L
U
R
R
O
U
N
D
SURROUND ON/OFF
SURROUND MODE
INPUT
ANALOG/DIGITAL
B
A
S
S
B
O
O
S
T
A
D
J
U
S
T
S
E
T
T
I
N
G
D
V
D
M
U
L
T
I
DVD
VCR
TV SOUND/DBS
SOURCE NAME
I
N
P
U
T
A
T
T
CONTROL
DOWN UP
S
P
E
A
K
E
R
S
O
N
/
O
F
F
1
2
CD
TAPE/CDR
PHONO
FM/AM
S
O
U
R
C
E
N
A
M
E
PHONES
Left rear
speaker
Right rear
speaker
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992–1997 Dolby
Laboratories, Inc. All rights reserved.
**Manufactured underlicense from Digital Theater Systems, Inc. US
PAT. No. 5,451,942 and other world-wide patents issued and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. Copyright 1996 Digital Theater
Systems, Inc. All rights reserved.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
I DAP (Digital Acoustic Processor) modes
I All Channel Stereo
DAP modes have been designed to create important acoustic
surround elements.
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.
The sound heard in a live club, dance club, hall or pavilion consists
of direct sound and indirect sound—early reflections and reflections
from behind. Direct sounds reach the listener directly without any
reflection. On the other hand, indirect sounds are delayed by the
distances of the ceiling and walls (see the diagram below).
These indirect sounds are important elements of the acoustic
surround effects. The DAP mode can reproduce a realistic sound
field by adding these indirect sounds.
All Channel Stereo can be used when the front and rear
speakers are connected to this receiver without respect to the
center speaker connection.
If the center speaker is connected and activated, the same phase of
the front left and right signals are output through the center speaker.
All Channel Stereo can be used while reproducing 2 channel stereo
software, either analog or digital except Dolby Digital and DTS
Digital Surround.
DAP modes can be used when the front and rear speakers are
connected to this receiver (without respect to the center speaker
connection: no sound comes out of the center speaker even if it is
connected).
• When All Channel Stereo is selected, the DSP indicator lights up
on the display.
All Channel Stereo reproduction
The following DAP modes are provided with this receiver:
LIVE CLUB
: Gives the feeling of a live music club with a low
ceiling.
DANCE CLUB : Gives a throbbing bass beat.
HALL
: Gives clear vocal and the feeling of a concert
hall.
PAVILION
: Gives the spacious feeling of a pavilion with a
high ceiling.
These DAP modes can be used to add the acoustic surround effects
while reproducing 2 channel stereo software—either analog or
digital except Dolby Digital and DTS Digital Surround—and can
give you a real “being there” feeling.
• When one of the DAP modes is selected, the DSP indicator lights
up on the display.
Sound reproduced from All Channel Stereo
DVD MULTI Playback Mode
Creating sound field
This receiver provides the DVD MULTI playback mode for
reproducing the analog discrete 5.1 channel output mode of the
DVD player or other equipment.
You can adjust speaker output levels while playing back a video
software such as a DVD using the analog discrete 5.1 channel
output mode.
Reflections from behind
Early reflections
• For connecting analog discrete output jacks, see page 8.
• For details on the DVD MULTI playback mode, see page 30.
Note:
When you select “DVD MULTI” as the source to play, Surround mode
is canceled, and the SURROUND ON/OFF and SURROUND MODE
buttons do not work.
Direct sounds
⅜:Possible/
ן :Impossible Available Surround modes for each input signal
Mode SURROUND DOLBY
DTS
PLII
PLII
MUSIC
LIVE
CLUB
DANCE
CLUB
ALL CH
STEREO
HALL
ן PAVILION
Signals
OFF (stereo) DIGITAL SURROUND MOVIE
Dolby Digital
(Multichannel)
⅜
⅜
⅜
ן ן ן ⅜
ן ⅜
ן ן ן ן ן ן ן ן Dolby Digital
(2 channel)
ן ן DTS Digital
Surround
(Multichannel)
⅜
⅜
ן ן ⅜
ן ⅜
ן ⅜
ן ן ן ן ן ן ן ן ן ן DTS Digital
Surround
ן (2 channel)
Linear PCM
Analog
⅜
⅜
ן ן ן ן ⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
24
Download from Www.Somanuals.com. All Manuals Search And Download.
About Relations between Speaker Layouts and Surround Modes
Available Surround modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see pages 16 to 18).
• If only front speakers are connected, you cannot use Surround modes.
• If rear speakers are not connected, you cannot use DAP modes and All Channel Stereo.
Speaker Layouts
Available Surround modes
When the center and rear speakers
are connected (5 channels):
Turning on or off the Surround modes
Each time you press SURROUND ON/OFF, Surround modes turn on or off.
TV
Front
speaker
Front
speaker
SPK
1
TUNED
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
STEREO
AUTO MUTING
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
LS RS
SURROUND ON/OFF
SURROUND
ON/OFF
S
Center speaker
Last selected
Surround mode
(Front panel)
(Remote)
SURROUND OFF
Ex.: “PL II MUSIC” has been selected.
Rear
Rear
speaker
speaker
Selecting the Surround modes
Each time you press SURROUND MODE, Surround modes change as follows:
STEREO
AUTO MUTING
VOLUME
SPK
1
TUNED
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
LS RS
SURROUND
MODE
S
SURROUND MODE
When the rear speakers are connected
(4 channels):
PL II MOVIE
PL II MUSIC
DANCE CLUB
(Remote) (Front panel)
TV
LIVE CLUB
HALL
Front
Front
PAVILION
speaker
speaker
(Back to the beginning)
ALL CH STEREO
Note:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is activated
(“DOLBY DIGITAL” or “DTS SURROUND”) by pressing SURROUND ON/OFF (with
the digital input mode selected).
• For Dolby Digital 2 ch software, you need to select “PLII MUSIC” or “PLII MOVIE”
by pressing SURROUND MODE.
Rear
speaker
Rear
speaker
• For more details, see the table on page 24.
Turning on or off the Surround modes
When the center speaker is connected
(3 channels):
Each time you press SURROUND ON/OFF, the Surround modes turn on or off.
SPK
1
TUNED
STEREO
AUTO MUTING
L
C
R
DIGITAL AUTO
LINEAR PCM
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
S.WFR LFE
LS RS
S
SURROUND ON/OFF
SURROUND
ON/OFF
TV
Front
Front
speaker
speaker
PL II MOVIE
or
PL II MUSIC
Center speaker
SURROUND OFF
(Front panel)
(Remote)
Ex.: “PL II MUSIC” has been selected.
Selecting the Surround modes
Each time you press SURROUND MODE, Surround modes change as follows:
SPK
1
TUNED
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
STEREO
AUTO MUTING
SURROUND
MODE
SURROUND MODE
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
LS RS
S
(Remote) (Front panel)
PL II MOVIE
PL II MUSIC
Note:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is activated
(“DOLBY DIGITAL” or “DTS SURROUND”) by pressing SURROUND ON/OFF (with
the digital input mode selected).
• For Dolby Digital 2 ch software, you need to select “PLII MUSIC” or “PLII MOVIE”
by pressing SURROUND MODE.
• For more details, see the table on page 24.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
Before you start, remember....
• Make sure that you have set the speaker information correctly (see pages 16 to 18).
• You cannot adjust the center speaker output level when you have set “CNTR SP” to “NONE.”
• You cannot adjust the rear speaker output levels when you have set “REAR SP” to “NONE.”
• Remember not to change the speaker setting while using any Surround modes; otherwise, it may be canceled when you deactivate the
speakers required for the Surround mode.
Front Panel
Display
RX-7020V AUDIO/VIDEO CONTROL RECEIVER
FM/AM TUNING
FM/AM PRESET
FM MODE
MEMORY
SPK
1
2
R
BASS BOOST
TUNED STEREO AUTO MUTING SLEEP
VOLUME
ANALOG
DIGITAL AUTO
STANDBY
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
S.WFR LFE
LINEAR PCM
DIGITAL
MASTER VOLUME
LS
S
RS
STANDBY/ON
CH-
INPUT
SURROUND ON/OFF
SURROUND MODE
ANALOG/DIGITAL
BASS BOOST
ADJUST SETTING
DVD MULTI
DVD
VCR
TV SOUND/DBS
SOURCE NAME
INPUT ATT
CONTROL
DOWN UP
SPEAKERS ON/OFF
1
2
CD
TAPE/CDR
PHONO
FM/AM
SOURCE NAME
PHONES
SURROUND SURROUND
ADJUST
CONTROL
UP 5/DOWN ∞
ON/OFF
MODE
Using Dolby Pro Logic II, Dolby Digital
and DTS Digital Surround
Remote Control
Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• When playing back digital multichannel software (Dolby Digital
5.1 ch or DTS Digital Surround), the SURROUND MODE button
does not work.
A/V CONTROL RECEIVER
From the remote control:
CATV/DBS
DVD
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
It will be convenient for you to use the remote control for
adjustments, since you can make adjustments from your listening
point, by using the test signal.
• For selecting Panorama mode for Pro Logic II Music, use the
button on the front panel.
CD
TV/DBS
TAPE/CDR PHONO
SURROUND
MODE
BASS
TREBLE
SURROUND
ON/OFF
−
−
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP
ON/OFF
MODE
INPUT
CENTER +/–
REAR•L +/–
– CENTER +
BASS BOOST EFFECT
1
TEST
2
3
EFFECT
SOUND
TEST
MENU
– REAR • L +
SOUND
1 Setting the analog or digital input mode for the
4
5
6
ENTER
DIMMER
MUTING
– REAR • R +
source you like to listen and start playing.
7/P
8
9
–SUBWOOFER +
REAR•R +/–
When playing back software encoded with Dolby Digital and DTS
Digital Surround, select the digital input mode (see page 15).
10
RETURN
0
+10
+
100
FM MODE
CATV/DBS
CONTROL
+
+
+
CH
TV VOL
VOLUME
TV/VIDEO
−
−
−
2 Press SURROUND ON/OFF to
SURROUND
ON/OFF
activate Surround mode.
+
/REW
FF/
TUNING
Each time you press the button, Surround mode
turns on and off alternately.
−
REC
PAUSE
• If you are playing back software encoded with Dolby Digital
multichannel, “DOLBY DIGITAL” is selected.
• If you are playing back software encoded with DTS Digital
Surround, “DTS SURROUND” is selected.
CONTROL
RM-SRX7020J REMOTE CONTROL
• If you are playing back any software other
than above, you can select “PL II MUSIC” or
SURROUND
MODE
“PL II MOVIE” according to the source by
pressing SURROUND MODE. ( PRO
LOGIC II indicator lights up on the display.)
If you like to adjust sound, go to step 3.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND
On the front panel:
3 Press SOUND.
You can also use the buttons on the front panel to adjust the
Surround modes. However, no test tone is available when using the
buttons on the front panel. So make adjustments while listening to
the sound of the source played back.
The 10 keys are activated for sound adjustments.
TEST
4 Press TEST to check if you can hear
4
the sounds through all the speakers at
1 Setting the analog or digital input mode for the
the equal level.
source you like to hear and start playing.
“TEST TONE L” starts flashing on the
display, and a test tone comes out of the
speakers in the following order:
When playing back software encoded with Dolby Digital and DTS
Digital Surround, select the digital input mode (see page 15).
TEST TONE R
TEST TONE L
TEST TONE C
(Center speaker)
(Right front speaker)
(Left front speaker)
SURROUND ON/OFF
2 Press SURROUND ON/OFF to
activate Surround mode.
TEST TONE LS
(Left rear speaker)
TEST TONE RS
(Right rear speaker)
Each time you press the button, Surround
mode turns on and off alternately.
Notes:
• If you are playing back software encoded with Dolby Digital
multichannel, “DOLBY DIGITAL” is selected.
• If you are playing back software encoded with DTS Digital
Surround, “DTS SURROUND” is selected.
• You can adjust the speaker output levels without outputting the
test tone.
• No test tone comes out of the center speaker when “CNTR SP”
is set to “NONE.”
• No test tone comes out of the rear speakers when “REAR SP”
is set to “NONE.”
• If you are playing back any software other
SURROUND MODE
than above, you can select “PL II MUSIC”
or “PL II MOVIE” according to the source
by pressing SURROUND MODE. ( PRO
LOGIC II indicator lights up on the display.)
5 Adjust the speaker output levels (–10 to +10).
Adjust the center speaker and rear speakers levels comparing to
the sound from the front speakers.
If you like to adjust sound, go to step 3.
3 Adjust the speaker output levels.
– CENTER +
• To adjust the center speaker level, press
CENTER +/–.
2
3
MENU
ADJUST
1) Press ADJUST repeatedly until one
of the following indications (with the
current setting)* appears on the
display.
– REAR • L +
• To adjust the left rear speaker level, press
REAR•L +/–.
5
6
ENTER
STEREO
AUTO MUTING
VOLUME
SPK
1
TUNED
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
L
C
R
DIGITAL AUTO
LINEAR PCM
ENTER
– REAR • R +
S.WFR LFE
LS RS
S
• To adjust the right rear speaker level, press
REAR•R +/–.
8
9
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
TEST
4
6 Press TEST again to stop the test
CENTER : To adjust the center speaker output level
(–10 to +10).
tone.
REAR L : To adjust the left rear speaker output level
(–10 to +10).
REAR R : To adjust the right rear speaker output level
(–10 to +10).
CONTROL
2) Press CONTROL UP 5/
DOWN
UP
DOWN ∞ to adjust the selected
speaker output levels.
3) Repeat steps 1) and 2) to adjust the other
speaker levels.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
When you select “PL II MUSIC,” you can go to the
following adjustment.
Using DAP Modes and All Channel Stereo
Once you have adjusted the DAP modes and All Channel Stereo, the
adjustment is memorized for each source.
• You cannot use the DAP modes and All Channel Stereo if no rear
speakers are connected.
Remote
NOT
4 Turn on Panorama control on or off.
ADJUST
• You cannot adjust the effect level for “ALL CH STEREO.”
1) Press ADJUST repeatedly until
“PANORAMA” (with the current
From the remote control:
setting)* appears on the display.
It will be convenient for you to use the remote control for
adjustments, since you can make adjustments from your listening
point.
TUNED
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT
STEREO
AUTO MUTING
VOLUME
SPK
1
L
C
R
DIGITAL AUTO
LINEAR PCM
S.WFR LFE
LS RS
S
1 Start playing 2 channel software—either analog
or Linear PCM—and select the source.
* “OFF” is the initial setting. If you have already changed
the setting, “ON” will be shown.
SURROUND
2 Press SURROUND ON/OFF to activate
ON/OFF
Surround mode.
2) Press CONTROL UP 5/
DOWN ∞ to turn on or off
CONTROL
DOWN UP
When the Surround mode turns on, the last selected
Surround mode will be activated.
• Each time you press the button, Surround mode turns on and
off alternately.
Panorama control.
• Each time you press the button, “ON”
and “OFF” change alternately.
SURROUND
3 Press SURROUND MODE repeatedly
MODE
ON
: Select this when you like to enjoy
until one of the DAP modes—“LIVE
CLUB,” “DANCE CLUB,” “HALL”
and “PAVILION”—or “ALL CH
STEREO” appears on the display.
The DSP indicator also lights up on the display.
“wraparound” sound effect with side-wall
image.
OFF
: Select this when you like to enjoy
originally recorded sounds.
If you like to adjust sound, go to step 4.
SOUND
4 Press SOUND.
To cancel Surround mode
Press SURROUND ON/OFF again so that “SURROUND OFF”
The 10 keys are activated for sound adjustments.
appears on the display.
5 Adjust the speakers output levels
• If Surround mode is canceled while playing back multichannel
digital software, all channel signals are mixed and output through
the front speakers (and subwoofer if you have connected a
subwoofer and set the subwoofer setting correctly—“YES”).
(–10 to +10).
– REAR • L +
• To adjust the left rear speaker level, press
REAR•L +/–.
5
6
ENTER
ENTER
– REAR • R +
• To adjust the right rear speaker level, press
REAR•R +/–.
8
9
– CENTER +
For “ALL CH STEREO” only:
• To adjust the center speaker level, press
CENTER +/–.
2
3
MENU
6 For DAP modes only:
EFFECT
Press EFFECT to select the effect
1
level (1 to 5) you want.
• Each time you press the button, the effect
level changes as follows:
EFFECT 2
EFFECT 3
EFFECT 4
EFFECT 1
EFFECT 5
As the number increases, selected mode becomes stronger
(normally set it to “EFFECT 3”).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
On the front panel:
5 Only for DAP modes: Adjust the effect level.
ADJUST G
1) Press ADJUST repeatedly until
“EFFECT” (with the current
1 Start playing 2 channel software—either analog
or Linear PCM—and select the source.
setting)* appears on the display.
* “EFFECT 3” is the initial setting. If you have already
changed the setting, another setting will be shown.
SURROUND ON/OFF
2 Press SURROUND ON/OFF to
activate Surround mode.
When Surround mode turns on, the last selected
Surround mode will be activated.
• Each time you press the button, Surround mode
turns on and off alternately.
CONTROL
2) Press CONTROL UP 5/
DOWN
UP
DOWN ∞ to select the effect
level (1 to 5) you want.
• Each time you press the button, the effect
level changes as follows:
SURROUND MODE
3 Press SURROUND MODE repeatedly
until one of the DAP modes—“LIVE
CLUB,” “DANCE CLUB,” “HALL”
and “PAVILION”—or “ALL CH STEREO”
appears on the display.
EFFECT 2
EFFECT 3
EFFECT 4
EFFECT 1
EFFECT 5
As the number increases, selected mode becomes stronger
(normally set it to “EFFECT 3”).
The DSP indicator also lights up on the display.
If you like to adjust sound, go to step 4.
4 Adjust the speaker output levels.
To cancel DAP modes and All Channel Stereo
Press SURROUND ON/OFF again so that “SURROUND OFF”
appears on the display. The DSP indicator goes off.
1) Press ADJUST repeatedly until one
ADJUST
of the following indications (with
the current setting)* appears on the
display.
REAR L : To adjust the left rear speaker output level
(–10 to +10).
REAR R : To adjust the right rear speaker output level
(–10 to +10).
CENTER : For “ALL CH STEREO” only—to adjust the
center speaker output level
(–10 to +10).
*“0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
CONTROL
DOWN
UP
2) Press CONTROL UP 5/
DOWN ∞ to adjust the selected
speaker output levels.
3) Repeat steps 1) and 2) to adjust the other
speaker levels.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using DVD MULTI Playback Mode
This receiver provides the DVD MULTI playback mode for
reproducing the analog discrete output mode of the DVD player.
Before playing back a DVD, refer also to the manual supplied with
the DVD player.
From the remote control:
DVD MULTI
1 Press DVD MULTI.
Note:
When you select “DVD MULTI” as the source to play, Surround
mode is canceled, and the SURROUND ON/OFF and
SURROUND MODE buttons do not work.
Activating DVD MULTI Playback Mode
2 Select the analog discrete output mode on the
DVD player, and start playing a DVD.
You can adjust the DVD MULTI playback mode while playing back
a DVD using the analog discrete output mode on the DVD player.
Once you have made adjustments, the receiver memorizes the
adjustments until you change them.
You also need to set the DVD player to the analog discrete output
mode.
• Refer also to the manual supplied with the DVD player.
If you need to make any adjustments, go to the
following steps.
Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
SOUND
3 Press SOUND.
The 10 keys are activated for adjusting the sound.
4 Adjust the speaker output levels.
On the front panel:
– CENTER +
DVD MULTI
1 Press DVD MULTI.
2
3
• To adjust the center speaker level, press
CENTER +/– (–10 to +10).
MENU
Notes:
• When you select “DVD MULTI” as the source to play, the
Surround mode is canceled, and the SURROUND ON/OFF and
SURROUND MODE buttons do not work.
• If you select the source to DVD MULTI while using both the
speakers connected to the FRONT SPEAKERS 1 and 2
terminals, the speakers connected to the FRONT SPEAKERS
2 terminals are deactivated.
• When selecting “DVD MULTI” as the source, you can only
select either the speakers connected to the FRONT
SPEAKERS 1 or 2 terminals.
– REAR • L +
• To adjust the left rear speaker level, press
REAR•L +/– (–10 to +10).
5
6
ENTER
ENTER
– REAR • R +
• To adjust the right rear speaker level, press
REAR•R +/– (–10 to +10).
8
9
2 Select the analog discrete output mode on the
DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you need to make any adjustments, go to the
following steps.
3 Adjust the speaker output levels.
ADJUST
1) Press ADJUST repeatedly until one
of the following indications appears
on the display:
CENTER :To adjust the center speaker output level
(–10 dB to +10 dB).
REAR L : To adjust the left rear speaker output level
(–10 dB to +10 dB).
REAR R : To adjust the right rear speaker output level
(–10 dB to +10 dB).
2) Press CONTROL UP 5/DOWN ∞
to adjust the selected speaker
output levels.
CONTROL
DOWN UP
3) Repeat steps 1) and 2) to adjust the other
speaker output levels.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPU LINK Remote Control System
The COMPU LINK remote control system allows you to operate
JVC’s audio components through the remote sensor on the receiver.
To use this remote control system, you need to connect JVC’s audio
components through the COMPU LINK-4 (SYNCHRO) jacks (see
below) in addition to the connections using cables with RCA pin
plugs (see page 7).
• Make sure that the AC power cords of these components are
unplugged before connection. Plug the AC power cords only after
all connections are completed.
Automatic Power On/Off (Standby): only possible with the
COMPU LINK-3 and COMPU LINK-4
Both the CD player and cassette deck (or CD recorder) turn on and
off (standby) along with the receiver.
When you turn on the receiver, the CD player or cassette deck (or
CD recorder) will turn on automatically, depending on which
component has been previously selected.
When you turn off the receiver, both the CD player and cassette
deck (or CD recorder) will turn off (standby).
Synchronized Recording
Synchronized recording means the cassette deck starts recording as
soon as a CD begins playing.
CD player
Cassette deck
or
To use synchronized recording, follow these steps:
CD recorder
1 Put a tape in the cassette deck and a disc in the
CD player.
COMPU LINK-4
(SYNCHRO)
2 Press the record (¶) button and the pause (8)
button on the cassette deck at the same time.
This puts the cassette deck into recording pause.
If you do not press the record (¶) button and pause (8) button at
the same time, the synchronized recording feature will not
operate.
Turntable
3 Press the play (3) button on the CD player.
The source changes on the receiver, and as soon as play starts,
the cassette deck starts recording. When the play ends, the
cassette deck enters recording pause, and stops about 4 seconds
later.
Notes:
• There are four versions of COMPU LINK remote control system.
This receiver is equipped with the fourth version—COMPU LINK-4.
This version is added systematic operations with the CD recorder to
the previous version—COMPU LINK-3.
• If your audio component has two COMPU LINK jacks, you can use
either one. If it has only one COMPU LINK jack, connect it so that it
is the last item in the series of components.
• To operate the cassette deck or CD recorder using the COMPU
LINK remote control system, set the source name correctly.
(See page 11.)
Notes:
• During synchronized recording, the selected source cannot be
changed.
• If the power of any component is shut off during synchronized
recording, the COMPU LINK remote control system may not
operate properly. In this case, you must start again from the
beginning.
• Refer also to the manuals supplied with your audio components.
This remote control system allows you to use four functions listed
below.
Remote Control through the Remote Sensor on the Receiver
You can control the connected audio components through the remote
sensor on the receiver using this remote control. Aim the remote
control directly at the remote sensor on the receiver. For details, see
pages 34 and 35.
Automatic Source Selection
When you press the play (3) button on a connected component or
on its own remote control, the receiver automatically turns on and
changes the source to the component. On the other hand, if you
select a new source on the receiver or on the remote control, the
selected component begins playing immediately.
In both cases, the previously selected source continues playing
without sound for a few seconds.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the
receiver.
This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC’s video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK Connection
TV
VCR
DVD player
VHS
DVD
AV
COMPU LINK – III
Note:
AV
COMPU LINK
You can only connect to the TV
with the AV COMPU LINK EX or
AV COMPU LINK III terminal.
The TV with AV COMPU LINK
RECEIVER/AMP terminal will
not be used.
AV
AV
COMPU LINK
COMPU LINK EX
AV
COMPU LINK III
IMPORTANT:
The AV COMPU LINK remote control system cannot control the DBS tuner
connected to the TV SOUND/DBS and DBS component video terminals.
Notes:
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
Selection of TV’s Input Mode (see page 33).
• When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
• Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”
• Refer also to the manuals supplied with your video components.
CONNECTIONS 2: Video Cable Connections
This receiver is equipped with three types of video terminals — S-video, composite video, and component video, and the signals coming into
this receiver through one type of video terminal can output only through the same type of the terminal. So you need to connect the VCR and/
or DVD player to the TV using one of the following three ways:
CASE 1
When connecting the source equipment to the receiver using the S-video terminals, connect also this
receiver to the TV’s Video Input 1 terminal using S-video cables.
Source
Equipment
RX-7020VBK
TV
S-video cable
S-video cable
To Video Input 1
Note:
If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input
terminal setting to “S/C” (see page 16).
CASE 2
When connecting the source equipment to the receiver using the composite video terminals, connect also
this receiver to the TV’s Video Input 2 terminal (composite video input) using composite video cables.
Source
Equipment
RX-7020VBK
TV
Composite
video cable
Composite
video cable
To Video Input 2
(Composite)
Note:
If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video
input terminal setting to “S/C” (see page 16).
CASE 3
When connecting the source equipment to the receiver using the component video terminals, connect also
this receiver to the TV’s Video Input 2 terminals (component video input) using component video cables.
Source
Equipment
RX-7020VBK
TV
Component
video cable
Component
video cable
To Video Input 2
(Component)
Note:
If you connect the DVD player and the DBS tuner to this receiver using the component video terminals, change the
video input terminal setting to “COMPONENT” (see page 16).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch DVD Play
1. If you have already plugged your VCR, DVD
player, TV and this receiver into the AC outlets,
unplug their AC power cords first.
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to “DVD” or
“DVD MULTI.”
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the source to “DVD
DIGITAL.”
2. Connect your VCR, DVD player, TV and this
receiver as follows, using the cables with the
monaural mini-plugs (not supplied).
• See “CONNECTIONS 1” on the previous page.
3. Connect the audio input/output jacks on VCR,
DVD player, TV and this receiver, using the
cables with RCA pin plugs.
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
• See pages 7 and 8.
Automatic Selection of TV’s Input Mode
• When you select “TV” as the source to play on the receiver, the
TV automatically changes the input mode to the TV tuner so that
you can watch TV.
• When you select “DVD,” “DVD MULTI,” “VCR” or “DBS” as
the source to play on the receiver, the TV automatically changes
the input mode to the appropriate position (either Video Input 1 or
Video Input 2) so that you can view the playback picture.
4. Connect the video input/output jacks on VCR,
DVD player, TV and this receiver, using the
cables with RCA pin plugs, with S-video plug or
with component video plugs.
• See “CONNECTIONS 2” on the previous page.
5. Plug the AC power cords of the components into
the AC outlets.
Note:
When connecting a TV with the AV COMPU LINK EX terminal to this
receiver, you cannot use a component video cable (as case 3 on page
32). Connect the TV using a S-video or composite video cable
(as cases 1 and 2).
6. When turning on the TV for the first time after
the AV COMPU LINK connection, turn the TV
volume to the minimum using the TV volume
control on the TV.
Automatic Power On/Off
The TV, VCR, and DVD player turn on and off along with the
receiver.
When you turn on the receiver;
• If the previously selected source is “VCR,” the TV and VCR will
turn on automatically.
7. Turn on the other connected components first,
then turn on this receiver.
• When turning on the VCR, use the remote control supplied
with this receiver (press VCR
).
• If the previously selected source is “TV SOUND” or “DBS,” only
the TV will turn on automatically.
The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.
• If the previously selected source is “DVD” or “DVD MULTI,” the
TV and DVD player will turn on automatically.
When you turn off the receiver, the TV, VCR and DVD player will
turn off.
Remote Control of the TV, DVD player, and VCR Using This
Remote Control
See page 36 for details.
• Aim the remote control directly at the remote sensor on each
target component.
Note:
If you turn off the receiver while recording on the VCR, the VCR will
not turn off, but continue recording.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy the video playback without setting other
switches manually. The receiver automatically turns on and changes
the source to “VCR.”
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(3) button on the VCR or on the remote control. So, you can get the
same result.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating JVC’s Audio/Video Components
You can use the remote control to operate other JVC’s
IMPORTANT:
components.
To operate JVC’s audio components using this remote control:
• You need to connect JVC’s audio components through the COMPU
LINK-4 (SYNCHRO) jacks (see page 31) in addition to the
connections using cables with RCA pin plugs (see page 7).
• Aim the remote control directly at the remote sensor on the receiver.
• If you use the buttons on the front panel, the remote control will not
operate that source. To operate a source with the remote control,
the source must be selected using source selecting buttons on the
remote control.
Operating Audio Components
A/V CONTROL RECEIVER
• To operate the cassette deck or CD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 11.)
• Refer also to the manuals supplied with your audio components.
CATV/DBS
DVD
VCR
DVD MULTI
VCR
TV
AUDIO
FM/AM
CD
TV/DBS
TAPE/CDR PHONO
Sound Adjustment
You can always use the following buttons:
BASS
TREBLE
−
−
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP
ON/OFF
MODE
INPUT
– CENTER +
BASS BOOST EFFECT
SURROUND ON/OFF : Turn on or off the Surround modes.
SURROUND MODE : Select the Surround modes.
1
2
3
MENU
– REAR • L +
SOUND
TEST
4
5
6
ENTER
DIMMER
MUTING
– REAR • R +
7/P
8
9
–SUBWOOFER +
After pressing SOUND, you can use the following buttons for sound
adjustment:
10
RETURN
0
+10
100
+
FM MODE
CATV/DBS
CONTROL
+
+
+
SUBWOOFER +/–
CENTER +/–
REAR•L +/–
REAR•R +/–
EFFECT
: Adjust the subwoofer output level.
: Adjust the center speaker output level.
: Adjust the left rear speaker output level.
: Adjust the right rear speaker output level.
: Select the DAP effect level.
CH
TV VOL
VOLUME
TV/VIDEO
−
−
−
+
/REW
FF/
TUNING
−
REC
PAUSE
CONTROL
TEST
: Turn on or off the test tone output.
RM-SRX7020J REMOTE CONTROL
Note:
After adjusting sounds, press the corresponding source selecting
button or CONTROL to operate your target source by using the 10
keys; otherwise, the 10 keys cannot be used for operating your target
source.
When you press one of the following buttons, the remote
control operation mode appears on the display window.
Tuner
You can always use the following buttons:
A/V CONTROL RECEIVER
FM/AM
: Alternate between FM and AM.
After pressing FM/AM, you can use the following buttons for tuner
operations:
Ex.: When you press CD.
1 – 10, +10
: Select a preset channel number directly.
• For channel number 5, press 5.
• For channel number 15, press +10, then 5.
• For channel number 20, press +10, then 10.
Buttons on the Remote Control
FM/AM
Remote Control Operation Mode
TUNER
CD
PHONO
CD
PHONO
TAPE/CDR
DVD
DVD MULTI
TV/DBS
TAPE
DVD
DVD
TV
VCR
TUNING +/–
: Tune into stations.
FM MODE
: Change the FM reception mode.
VCR
CATV/DBS CONTROL
CONTROL
SOUND
DBS
VCR or TAPE or CDDSC
SOUND
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player
Turntable
After pressing CD, you can use the following buttons for CD
operations:
After pressing PHONO, you can perform the following operations
on the turntable:
3
: Start playback.
3
7
: Start playing.
4
: Return to the beginning of the current
(or previous) track.
: Stop operations.
¢
: Skip to the beginning of the next track.
: Stop playback.
Cassette deck
7
After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE”
appears on the display window), you can use the following buttons
for cassette deck operations:
8
: Pause playback. To release it, press 3.
1 – 10, +10
: Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
3
: Start playback.
FF
: Fast wind a tape from left to right.
: Fast wind a tape from right to left.
: Stop playback or recording.
: Pause playback. To release it, press 3.
REW
7
CD changer
8
After pressing CONTROL repeatedly until “CDDSC” appears on
the display window, you can perform the following operations on
the CD changer:
REC PAUSE
: Press this button to enter recording pause.
Press this button then 3 to start recording.
3
: Start playback.
Notes:
4
: Return to the beginning of the current
(or previous) track.
• Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
• You can use either TAPE/CDR button or CONTROL button to
activate the buttons listed above. If you press TAPE/CDR, the
playing source also changes. On the other hand, if you press
CONTROL repeatedly to select “TAPE,” the playing source does not
change.
¢
: Skip to the beginning of the next track.
: Stop playback.
7
8
: Pause playback. To release it, press 3.
1 – 6, 7/P
: Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on the
CD changer:
CD recorder
After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE”
appears on the display window), you can use the following buttons
for CD recorder operations:
1 – 10, +10
: Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
3
: Start playback.
4
: Return to the beginning of the current
(or previous) track.
Example:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CONTROL repeatedly until “CDDSC” appears on the
display window, then press 4.
¢
: Skip to the beginning of the next track.
: Stop playback.
7
2. Press CD, then press +10, 2.
8
: Pause playback. To release it, press 3.
REC PAUSE
: Press this button to enter recording pause.
Press this button then 3 to start recording.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the number buttons after
pressing CD:
Notes:
• Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
• “TAPE” appears on the display window even though you have
changed the source name to “CDR.”
1
2
3
Select a disc number.
Then select a track number (always enter two digits).
Start playback.
• You can use either TAPE/CDR button or CONTROL button to
activate the buttons listed above. If you press TAPE/CDR, the
playing source also changes. On the other hand, if you press
CONTROL repeatedly to select “TAPE,” the playing source does not
change.
Examples:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then 3.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then 3.
• Selecting disc number 105, track number 12, and starting
playback.
Press 1, 0, 5, then 1, 2, then 3.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating JVC’s Audio/Video Components
DVD player
Operating Video Components
After pressing DVD or DVD MULTI (source selecting button), you
can use the following buttons for DVD operations:
IMPORTANT:
To operate JVC’s video components using this remote control:
3
: Start playback.
•
You need to connect JVC’s video components through the AV
COMPU LINK terminals (see page 32) in addition to the
connections using cables with RCA pin plugs (see pages 7 and 8).
Some JVC’s VCRs can accept two types of the control signals —
remote code “A” and “B.” Before using this remote control, make
sure that the remote control code of the VCR connected to the
VCR jacks is set to code “A.”
4
: Return to the beginning of the current
(or previous) track.
•
¢
7
: Skip to the beginning of the next track.
: Stop playback.
8
: Pause playback. To release it, press 3.
•
When using the remote control:
–For the DVD player and VCR operations, aim the remote control
directly at the remote sensor on each component, not on the
receiver.
–For the TV having the AV COMPU LINK terminal, aim the remote
control directly at the remote sensor on the TV.
DVD menu operations
After pressing DVD or DVD MULTI
(source selecting button), you can use
the following buttons for DVD menu
operations:
– CENTER +
EFFECT
1
TEST
2
3
MENU
– REAR • L +
4
5
6
ENTER
– REAR • R +
7/P
8
9
VCR
–SUBWOOFER +
You can always perform the following operations:
10
RETURN
0
+10
100
+
FM MODE
VCR
: Turn on or off a VCR.
MENU
: Display or erase the menu screen.
: Select an item on the menu screen.
: Enter a selected item.
After pressing VCR (or CONTROL repeatedly until “VCR” appears
on the display window), you can use the following buttons for VCR
operations:
5/∞/3/2
ENTER
3
: Start playback.
FF
: Fast wind a tape.
REW
: Rewind a tape.
TV
7
: Stop playback or recording.
: Pause playback. To release it, press 3.
: Select a TV channel on the VCR.
You can always perform the following operations:
8
TV
:Turn on or off a TV or a CATV converter.
1 – 9, 0
REC PAUSE
TV/VIDEO
: Change the input mode (TV tuner and video
input).
: Press this button to enter recording pause.
Press this button then 3 to start recording.
TV VOL +/–
: Adjust the volume.
CH +/–
: Change the TV channels on the VCR.
After pressing TV/DBS (source selecting button), you can use the
following buttons for TV operations:
Note:
• You can use either VCR button or CONTROL button to activate the
buttons listed above. If you press VCR, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select “VCR,” the playing source does not change.
CH +/–
1 – 9, 0, +10 (100+) : Select a channel.
RETURN (10) : Function as the RETURN button.
: Change the channels.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ Video Equipment
By changing the transmittable signals, you can use the remote
control supplied for this unit to operate other manufacturers’
equipment.
• Refer also to the manuals supplied for the other products.
• To operate these components with the remote control, first you
need to set the manufacturers’ code each for TV, CATV converter,
VCR and DVD player.
Manufacturers’ codes for TV
Manufacturer
Codes
JVC
AKAI
00*, 02, 13, 14, 47, 74
01, 02
BLAUPUNKT
FISHER
03, 04
01, 05
GRUNDIG
HITACHI
IRADDIO
ITT/NOKIA
LOEWE
03, 06, 07
08, 09, 10, 49
02
11, 12
06, 15, 16
• After replacing batteries of the remote control, set the
manufacturers’ codes again.
To change the transmittable signals
for operating a TV
MAGNAVOX
METS
MITSUBISHI
MIVAR
08, 17, 49
50, 51, 52, 53
08, 18, 19, 20
21
1 Press and hold TV
2 Press TV/DBS.
.
NORDMENDE
OKANO
22, 23
15
3 Enter manufacturer’s codes using buttons 1 – 9,
PANASONIC
PHILIPS
QUELLE
24, 25, 26, 27, 76
15, 17, 28, 75
52, 53, 54, 55, 56, 57, 58,
59, 60, 61, 62, 63, 64, 65,
66, 67
and 0.
4 Release TV
.
Now, you can perform the following operations on the TV.
TV
:Turn on or off the TV.
RCA/PROSCAN
SABA
SAMSUNG
SANYO
08, 24, 29, 30, 31, 48
32, 33, 68, 69, 70
06, 08, 16, 34, 35, 49
01, 05
TV/VIDEO
TV VOL +/–
: Set the input mode (either TV or VIDEO).
: Adjust the volume.
After pressing TV/DBS, you can perform the following
operations on the TV:
SCHNEIDER
SHARP
02, 15, 36
37, 38, 77
SONY
39
CH +/–
: Change the channels.
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
40, 41, 42, 69
71, 72
37, 43, 44
1 – 9, 0, +10 (100+) : Select a channel.
10
: Function as the ENTER button.
45, 46
* “00” is the initial setting.
Note:
Refer also to the manual supplied with your TV.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
5 Try to operate your TV by pressing TV
.
When your TV turns on or off, you have entered the correct
codes.
To change the transmittable signals for
operating a CATV converter or DBS tuner
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
1 Press and hold CATV/DBS
.
2 Press CATV/DBS CONTROL.
3 Enter manufacturer’s codes using buttons 1 – 9,
and 0.
4 Release CATV/DBS
.
Now, you can perform the following operations on the CATV
converter or DBS tuner.
CATV/DBS
: Turn on or off the CATV converter or DBS tuner.
After pressing CATV/DBS CONTROL, you can perform the
following operations on the CATV converter or DBS tuner:
CH +/–
: Change the channels.
1 – 9, 0, +10 (100+) : Select the channels.
10
: Function as the ENTER button.
Note:
Refer also to the manual supplied with your CATV converter or
DBS tuner.
TO BE CONTINUED TO THE NEXT PAGE
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ Video Equipment
5 Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
To change the transmittable signals for
operating a VCR
.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct codes.
1 Press and hold VCR
2 Press VCR.
.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
3 Enter manufacturer’s codes using buttons 1 – 9,
and 0.
4 Release VCR
.
Note:
Now, you can perform the following operations on the VCR.
You cannot use both the CATV converter and DBS tuner at the same
time.
VCR
: Turn on or off the VCR.
After pressing VCR, you can perform the following operations
on the VCR:
Manufacturers’ codes for CATV converter
Manufacturer
Codes
CH +/–
: Change the channels.
: Select the channels.
GENERAL INSTRUMENT 06, 07, 08, 09, 10,
11, 12, 13, 14, 29
HAMLIN/REGAL
JERROLD
1 – 9, 0, +10 (100+)
10
: Function as ENTER button.
: Start playback.
01, 02, 03, 04, 05
06, 07, 08, 09, 10,
11, 12, 13, 14
15, 16, 17
18, 19, 20
21, 22
23, 24, 25
26
27, 28
3
FF
: Fast-wind a tape.
OAK
REW
: Rewind a tape.
PANASONIC
PIONEER
SCIENTIFIC ATLANTA
TOCOM
7
: Stop playback or recording.
: Pause playback. To release it, press 3.
8
REC PAUSE
: Press this button to enter recording
pause.
ZENITH
Then press 3 to start recording.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Note:
Refer also to the manual supplied with your VCR.
Manufacturers’ codes for DBS tuner
5 Try to operate your VCR by pressing
Manufacturer
Codes
56, 57*, 67
43, 44, 45, 46, 47
30
50, 51, 67
31
32, 33
48, 52, 53, 55
68
VCR
.
JVC
When your VCR turns on or off, you have entered the correct
codes.
AMSTRAD
BLAUPUNKT
ECHOSTAR
GOLDSTAR
GRUNDIG
HIRSHMANN
INSTRUMENT
ITT/NOKIA
KATHREIN
NEC
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
34
52, 58, 61, 62, 63
35, 36
48
37, 38
65
ORBITECH
PHILIPS
RCA
SAMSUNG
SCHWAIGER
SIEMENS
SONY
39, 40
61, 64
41, 42
66
TECHNISAT
48
* “57” is the initial setting.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturers’ codes for VCR
To change the transmittable signals for
operating a DVD player
Manufacturer
Codes
JVC
00*, 26, 27, 28, 29, 58
AIWA
01, 02
1 Press and hold AUDIO
2 Press DVD.
.
BELL & HOWELL 03
BLAUPUNKT
CGM
EMERSON
FISHER
FUNAI
04, 05
06, 07
08, 10, 11, 12, 64, 65
03, 14, 15, 16, 17
3 Enter manufacturer’s codes using buttons 1 – 9,
and 0.
4 Release AUDIO
.
Now, you can use the following buttons on the DVD player.
01
GE
18, 19, 20
07
13, 21
06, 22
18, 23, 24, 25, 66
07, 21
04, 19, 24
30, 31, 32, 33, 34, 35
26, 27
03, 36
38
09
19, 24, 39, 40
04, 19, 21, 24, 41, 42
21
3
: Start playback.
GOLDSTAR
GOODMANS
GRUNDIG
HITACHI
7
: Stop playback.
¢
4
: Skip to the beginning of the next track.
: Return to the beginning of the current
(or previous) track.
LOEWE
MAGNAVOX
MITSUBISHI
NEC
NOKIA
NORDMENDE
ORION
PANASONIC
PHILIPS
PHONOLA
RCA/PROSCAN
8
: Pause playback. To release it, press 3.
DVD menu operations
After pressing DVD (source
selecting button), you can use the
following buttons for DVD menu
operations:
– CENTER +
EFFECT
1
TEST
2
3
MENU
– REAR • L +
4
5
6
ENTER
– REAR • R +
7/P
8
9
–SUBWOOFER +
04, 18, 19, 23, 24, 43, 44,
45
10
RETURN
0
+10
100
+
FM MODE
SABA
38, 46
SAMSUNG
SANYO
SHARP
SIEMENS
SONY
TELEFUNKEN
TOSHIBA
ZENITH
45, 47, 59, 61, 62, 63
03, 48, 49
37, 50
03, 51
52, 53, 54
55, 60
MENU
: Display or erase the menu screen.
: Select an item on the menu screen.
: Enter a selected item.
5/∞/3/2
ENTER
43, 44
57
5 Try to operate your DVD player by pressing
AUDIO
.
* “00” is the initial setting.
When your DVD player turns on or off, you have entered the
correct codes.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
If there are more than one code listed for your brand of DVD
player, try each one until the correct one is entered.
Manufacturers’ codes for DVD player
Manufacturer
Codes
JVC
DENON
00, 02
01
PANASONIC
PHILIPS
PIONEER
RCA
03
13
04, 05, 06
07
SAMSUNG
SONY
08
09
TOSHIBA
YAMAHA
10
11, 12
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC’s service center.
POSSIBLE CAUSE
The power cord is not plugged in.
Speaker signal cables are not connected.
SOLUTION
PROBLEM
The power does not come on.
No sound from speakers.
Plug the power cord into an AC outlet.
Check speaker wiring and reconnect if
necessary.
The SPEAKERS ON/OFF 1 and 2 button
are not set correctly.
Press SPEAKERS ON/OFF 1 and 2 button
correctly.
An incorrect source is selected.
Muting is activated.
Select the correct source.
Press MUTING to cancel the mute.
An incorrect input mode (analog or
digital) is selected.
Select the correct input mode (analog or
digital).
Connections are incorrect.
Check connections.
For analog connections, see pages 6 – 8.
For digital connections, see page 9.
Speaker signal cables are not connected
properly.
Check speaker wiring and reconnect if
necessary.
Sound from one speaker only.
The balance is set to one extreme.
Incoming signal is too weak.
Adjust the balance properly (see page 19).
Continuous hiss or buzzing during FM
reception.
Connect an outdoor FM antenna or contact
your dealer.
The station is too far away.
An incorrect antenna is used.
Select a new station.
Check with your dealer to be sure you have
the correct antenna.
Antennas are not connected properly.
Ignition noise from automobiles.
Check connections.
Move the antenna farther from automobile
traffic.
Occasional cracking noise during FM
reception.
Your turntable is too close to speakers.
Move speakers away from the turntable.
Howling during record playing
Noise is heard.
An earth (H) cable is not connected to the
AM (H) terminal on the rear panel.
Connect the cable to the AM (H) terminal on
the rear panel.
Speakers are overloaded because of high
volume.
1. Press STANDBY/ON
on the front
“OVERLOAD” starts flashing on the
display.
panel to turn off the receiver.
2. Stop the playback source.
3. Turn on the receiver again, and adjust the
volume.
Speakers are overloaded because of short
circuit of speaker terminals.
Press STANDBY/ON
then check the speaker wiring.
on the front panel,
If “OVERLOAD” does not disappear, unplug
the AC power cord, then plug it back again.
If speaker wiring is not short-circuited, contact
your dealer.
The built-in microcomputer is not
functioning correctly.
Press STANDBY/ON
turn off the receiver. After unplugging the
power cord, consult your dealer.
on the front panel to
“DSP MICON NG” starts flashing on the
display.
The receiver is overloaded because of a
high voltage.
Press STANDBY/ON
turn off the receiver. After unplugging the
power cord, consult your dealer.
on the front panel to
The STANDBY lamp lights up after
turning on the power, but soon the
receiver turns off (into standby mode).
There is an obstruction in front of the
remote sensor on the receiver.
Remove the obstruction.
Remote control does not work.
Batteries are weak.
Replace batteries.
The remote control is not ready for your
intended operation.
Press SOUND or source selecting buttons
first, then press the button you want to use.
(See pages 34 – 39).
Remote control does not operate as you
intend.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Designs & specifications are subject to change without notice.
Specifications
Amplifier
Output Power
At Stereo operation:
Front channels:
100 W per channel, min. RMS, driven into 8 Ω,
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
Rear channels:
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM):
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
2.7 mV/47 kΩ
220 mV/47 kΩ
0.5 V (p-p)/75 Ω
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
–21 dBm to –15 dBm (660 nm 30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
Digital output:
TAPE/CDR, VCR:
220 mV
Optical: DIGITAL OUTPUT
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
70 dB/78 dB (at REC OUT)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
Signal-to-Noise Ratio (’66 IHF/’78 IHF):
Frequency Response (8 Ω):
PHONO (MM):
87 dB/78 dB
20 Hz to 20 kHz ( 1 dB)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
PHONO (MM):
20 Hz to 20 kHz ( 1 dB)
RIAA Phono Equalization:
Bass boost:
1 dB(20 Hz to 20 kHz)
+3 dB 1 dB at 100 Hz
Tone Control:
Bass (100 Hz):
Treble (10 kHz):
10 dB
10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
DVD, VCR, DBS:
DVD, VCR, DBS:
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
S-video:
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75 Ω
(Y: luminance):
(PB/CB, PR/CR):
Component video:
DVD, DBS:
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
Video Output Level/Impedance:
Composite video:
S-video:
VCR, MONITOR OUT:
VCR, MONITOR OUT:
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75 Ω
(Y: luminance):
(PB/CB, PR/CR):
Component video:
MONITOR OUT:
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
Synchronization:
Negative
45 dB
Signal-to-Noise Ratio:
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FM tuner (IHF)
Tuning Range:
87.5 MHz to 108.0 MHz
Monaural:
Usable Sensitivity:
12.8 dBf (1.2 µV/75 Ω)
50 dB Quieting Sensitivity:
Monaural:
Stereo:
21.3 dBf (3.2 µV/75 Ω)
41.3 dBf (31.5 µV/75 Ω)
Signal-to-Noise Ratio (IHF-A weighted):
Total Harmonic Distortion:
Monaural:
Stereo:
78 dB at 85 dBf
73 dB at 85 dBf
Monaural:
Stereo:
0.4% at 1 kHz
0.6% at 1 kHz
Stereo Separation at REC OUT:
Alternate Channel Selectivity:
Frequency Response:
35 dB at 1 kHz
45 dB: ( 400 kHz)
30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM tuner
Tuning Range:
Usable Sensitivity:
530 kHz to 1 710 kHz
Loop antenna:
400 µV/m
Signal-to-Noise Ratio:
50 dB (100 mV/m)
General
Power Requirements:
Power Consumption:
AC 120V , 60 Hz
180 W/230 VA (at operation)
2 W (in standby mode)
Dimensions (W x H x D):
Mass:
435 mm x 146.5 mm x 425.5 mm
(17 3/16 in. x 5 13/16 in. x 16 13/16 in.)
8.8 kg (19.5 lbs)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet. There are no user serviceable
parts inside. Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51002-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
AUDIO-2
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
2 YRS
2 YRS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
C
1201NHMMDWJEIN
V
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|