CD RECEIVER
KD-AR400/KD-G400
KD-AR400/KD-G400
RECEPTOR CON CD
RECEPTEUR CD
KD-AR400/KD-G400
KD-AR400
KD-AR400
S
KD-G400
KD-G400
S
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the
cabinet. Retain this information
for future reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
GET0189-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to use the MODE button ...................
2
3
MP3 OPERATIONS ......................... 18
Playing an MP3 disc ................................. 18
Locating a file or a particular portion on
LOCATION OF THE BUTTONS ............
Control panel.............................................
Remote controller......................................
Preparing the remote controller ................
4
4
5
6
an MP3 disc............................................ 19
Selecting MP3 playback modes ................ 21
SOUND ADJUSTMENTS ................... 22
Selecting preset sound modes
BASIC OPERATIONS .......................
Turning on the power ................................
Canceling the display demonstration ........
Setting the clock........................................
7
7
8
9
(C-EQ: custom equalizer) ....................... 22
Adjusting the sound .................................. 23
OTHER MAIN FUNCTIONS ................ 24
Changing the general settings (PSM) ....... 24
Detaching the control panel ...................... 27
RADIO OPERATIONS ...................... 10
Listening to the radio................................. 10
Storing stations in memory ....................... 11
Tuning in to a preset station ...................... 12
CD CHANGER OPERATIONS .............. 28
Playing discs ............................................. 28
Selecting the playback modes .................. 31
CD OPERATIONS ........................... 13
Playing a CD ............................................. 13
Locating a track or a particular portion
EXTERNAL COMPONENT OPERATIONS ... 32
Playing an external component................. 32
on a CD .................................................. 14
Selecting CD playback modes .................. 15
Playing a CD Text ...................................... 16
Prohibiting disc ejection ............................ 16
TROUBLESHOOTING ...................... 33
MAINTENANCE ............................. 36
Handling discs........................................... 36
MP3 INTRODUCTION ...................... 17
What is MP3?............................................ 17
How are MP3 files recorded and
SPECIFICATIONS ........................... 37
played back? .......................................... 17
How to use the MODE button
If you press MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons
work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
Time countdown indicator
To use these buttons for original functions again after pressing MODE, wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF THE BUTTONS
Control panel
Display window
a
s
d
f
g
h
j
k
l
/
z x
1
2 3 4
5
6
7
8
9
p
q
w e
r
t
y
u
i
o
;
1 Control dial
Display window
a Disc information indicators
TAG (ID3 Tag),
s Main display
d EQ (equalizer) indicator
f Sound mode (C-EQ: custom equalizer)
indicators
2
(standby/on/attenuator) button
3 SEL (select) button
4 EQ (equalizer) button
5 FM/AM button
6 CD CD-CH (CD changer) button
7 Display window
(folder),
(track/file)
8 0 (eject) button
9 5 (up) button
ROCK, CLASSIC, POPS, HIP HOP, JAZZ, USER
•
also works as level meter during play if
the level meter is activated (see page 25).
+10 button
p
(control panel release) button
g Tuner reception indicators
ST (stereo), MO (monaural)
h MP3 indicator
j CH (CD changer) indicator
k CD indicator
l LOUD (loudness) indicator
/ Playback item/mode indicators
RND (random),
RPT (repeat)
z Source display
q Number buttons
w Remote sensor
e MO (monaural) button
r SSM (Strong-station Sequential Memory) button
t RPT (repeat) button
y RND (random) button
u MODE button
i DISP (display) button
(disc),
(folder),
o
4/¢
buttons
; ∞ (down) button
Volume level indicator
x Tr (track) indicator
–10 button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3 • Selects the preset stations while listening to
the radio.
Remote controller
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
• Skips to the first file of the previous folder
while listening to an MP3 disc.
Each time you press the button, you can
move to the previous folder and start playing
the first file.
• While playing an MP3 disc on an MP3-
compatible CD changer;
– Skips to the previous disc if pressed
briefly.
S
– Skips to the previous folder if pressed and
held.
Note: While playing a CD on a CD changer, this
always skips to the previous disc.
4 Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.
1 • Turns on the unit if pressed when the unit is
turned off.
5 • Selects the band while listening to the radio.
Each time you press the button, the band
changes.
• Turns off the unit if pressed and held until
“SEE YOU” appears on the display.
• Drops the volume level in a moment if
pressed briefly.
• Skips to the first file of the next folder while
listening to an MP3 disc.
Each time you press the button, you can
move to the next folder and start playing the
first file.
Press again to resume the volume.
2 • Searches for stations while listening to the
radio.
• While playing an MP3 disc on an MP3-
compatible CD changer;
• Fast-forwards or reverses the track/file if
pressed and held while listening to a disc.
• Skips to the beginning of the next track/file
or goes back to the beginning of the current
(or previous) tracks/files if pressed briefly
while listening to a disc.
– Skips to the next disc if pressed briefly.
– Skips to the next folder if pressed and
held.
Note: While playing a CD on a CD changer, this
always skips to the next disc.
6 Selects the source.
Each time you press the button, the source
changes.
7 Functions the same as the control dial on the
main unit.
Note: These buttons do not function for the
preferred setting mode adjustment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Return the battery holder.
Preparing the remote controller
Insert again the battery holder by pushing it
until you hear a clicking sound.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
(back side)
WARNING:
• Store the battery in a place where children
cannot reach.
Remote sensor
If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.
Installing the battery
When the controllable range or effectiveness of
the remote controller decreases, replace the
battery.
• When throwing away or saving the battery, wrap
it in tape and insulate; otherwise, the battery
may start to give off heat, crack, or start a fire.
• Do not poke the battery with tweezers or similar
tools.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
2) Remove the battery holder.
Doing this may cause the battery to give off
heat, crack, or start a fire.
(back side)
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight for
a long time. Otherwise, it may be damaged.
2. Place the battery.
Slide the battery into the holder with the +
side facing upwards so that the battery is
fixed in the holder.
Lithium coin
battery (product
number: CR2025)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
1
3
2
Volume level appears.
Turning on the power
1 Turn on the power.
Volume level indicator
Note on One-Touch Operation:
4 Adjust the sound as you want. (See
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
pages 22 and 23.)
To drop the volume in a moment
2 Select the source.
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To operate the tuner (FM or AM),
see pages 10 – 12.
To play a CD,
see pages 13 – 16.
To play an MP3 disc,
see pages 18 – 21.
To operate the CD changer,
see pages 28 – 31.
To turn off the power
Press and hold
second.
“SEE YOU” appears, then the unit turns off.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
for more than one
To operate the external component (LINE IN
or SIRIUS), see page 32.
3 Adjust the volume.
To increase the volume
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
To decrease the volume
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling the display
demonstration
3 Select “DEMO OFF.”
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
DEMO OFF
DEMO ON
• It is recommended to cancel the display
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
4 Finish the setting.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 25.)
To activate the display demonstration, repeat
the same procedure and select “DEMO ON” in
step 3.
2 Select “DEMO” if not shown on the
display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the current clock time or change the
display mode
Setting the clock
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 25.)
• During tuner operation:
Frequency
Clock
• During disc operation:
Elapsed
2 Set the hour.
Clock
playing time
1 Select “CLOCK H” (hour) if not shown on
the display.
Disc title /
performer
Track title
2 Adjust the hour.
Notes:
1
2
• While playing a conventional CD, “NO NAME”
appears for the disc title/performer and the track
title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 16 and 19.
• During external component operation:
3 Set the minute.
LINE IN
Clock
1 Select “CLOCK M” (minute).
2 Adjust the minute.
• During SIRIUS operation:
1
2
SIRIUS
Clock
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
4 Finish the setting.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
To stop searching before a station is received,
press the same button you have pressed for
searching.
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station manually:
Manual search
Searching for a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
FM1
FM2
FM3
AM
Note:
Selected band appears.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Press and hold ¢
or
4
until “M” (manual) starts flashing on
the display.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Start searching for a station.
To search stations of
higher frequencies
To search stations of lower frequencies
When a station is received, searching stops.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations in memory
3 Tune in to a station you want while
“M” (manual) is still flashing.
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
To tune in to stations of
higher frequencies
• Manual preset of both FM and AM stations
To tune in to stations of lower frequencies
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 200 kHz intervals for
FM and 10 kHz for AM) until you release
the button.
1 Select the FM band (FM1 – 3) you
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
When an FM stereo broadcast is hard to
receive:
1 Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
2 Press MODE to enter the functions
mode.
2 Press MO (monaural), while
“MODE” is still flashing on the
display, so that “MONO”
3 Press and hold SSM for about 2
appears on the display.
seconds.
Each time you press the button,
the monaural mode turns on
and off alternately.
MO (monaural) indicator
“SSM” flashes, then disappears when
automatic preset is over.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
4 Repeat the above procedure to store
other stations into other preset
numbers.
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 11 and 12.
2 Tune in to a station (in this example,
of 92.5 MHz).
To tune in to stations of
higher frequencies
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
To tune in to stations of lower frequencies
FM1
FM2
FM3
AM
2 Select the number (1 – 6) for the
preset station you want.
3 Press and hold the number button
(in this example, 1) for more than 2
seconds.
Note:
You can also use the 5 (up) or ∞ (down) button on
the unit to select the next or previous preset stations.
Each time you press the 5 (up) or ∞ (down) button,
the next or previous preset station is tuned in.
Preset number flashes for a while.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
Refer to “MP3 OPERATIONS” on pages 18 to 21
for operating MP3 discs.
The display changes to show the following:
Current source indication
Playing a CD
1 Open the control panel.
CD indicator
Total playing time Total track number
of the inserted disc of the inserted disc
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD CD-CH turns on the unit and starts playback
automatically.
Elapsed playing Current track
time
number
2 Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
playback automatically.
Notes:
• When a CD is inserted upside down, the CD
automatically ejects (if the control panel is open).
If the control panel is closed, the source changes to
the previously selected source, “PLEASE” and
“EJECT” appear alternately on the display.
• If there is no CD in the loading slot, you cannot
select CD as the source. “NO DISC” appears on
the display.
3 Close the control panel by hand.
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
All tracks will be played repeatedly until you
stop playback.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop play and eject the CD
To go to a particular track directly
Press 0.
Press the number button corresponding to the
track number to start its playback.
CD play stops and the control panel flips down.
The CD automatically ejects from the loading
slot. The source changes to the previously
selected source.
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
Notes:
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
To go to a track quickly (+10 and –10 buttons)
1 Press MODE to enter the functions mode
while playing a CD.
Locating a track or a
particular portion on a CD
2 Press +10 or –10.
To fast-forward or reverse the track
To skip 10 tracks* forwards to
the last track
Press and hold ¢
playing a CD, to fast-forward
the track.
, while
To skip 10 tracks* backwards
to the first track
Press and hold
reverse the track.
4, while playing a CD, to
* First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten (ex.
10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see “How to use the +10 and
–10 buttons” on page 15).
To go to the next or previous tracks
Press ¢
briefly, while
playing a CD, to go ahead to
the beginning of the next
track.
• After the last track, the first track will be
selected, and vice versa.
Each time you press the
button consecutively, the
beginning of the next tracks is
located and played back.
Press
4 briefly, while playing a CD, to go
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back tracks repeatedly
(Track Repeat Play)
How to use the +10 and –10 buttons
• Ex. 1: To select track number 32 while
playing track number 6
You can play back the current track repeatedly.
1 Press MODE to enter the
functions mode while playing a
CD.
(Twice)
\ 31 \ 32
(Three times)
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT”
appears on the display.
Track 6 \ 10 \ 20 \ 30
• Ex. 2: To select track number 8 while playing
track number 36
Each time you press the button,
track repeat play mode turns on
and off alternately.
(Three times)
(Twice)
Track 36 \ 30 \ 20 \ 10
\ 9 \ 8
RPT indicator
When track repeat play is turned on, the RPT
indicator lights up on the display. The current
track starts playing repeatedly.
Selecting CD playback modes
To play back tracks at random
(Disc Random Play)
You can play back all tracks on the CD at random.
1 Press MODE to enter the
functions mode while playing a
CD.
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “DISC RND”
appears on the display.
Each time you press the button,
disc random play mode turns on
and off alternately.
RND and
(disc) indicators
When disc random play is turned on, the RND
and indicators light up on the display. A track
randomly selected starts playing.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a CD Text
Prohibiting disc ejection
In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
You can prohibit disc ejection and can lock a disc
in the loading slot.
automatically when you play a CD Text.
While pressing CD CD-CH, press and
hold
for more than 2 seconds.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
“NO EJECT” flashes on the display for about 5
seconds, and the disc is locked and cannot be
ejected.
Disc title / performer
Track title
(
lights up on the display)
To cancel the prohibition and unlock the
disc
While pressing CD CD-CH, press and hold
Elapsed playing time and
Current track number
again for more than 2 seconds.
“EJECT OK” flashes on the display for about 5
seconds, and the disc is unlocked.
Clock and
Current track number
Notes:
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 26.
Some characters or symbols will not be shown (and
will be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the disc
title/performer and the track title.
• When track title is shown, the Tr indicator and
current track number also appear on the right side
of the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 INTRODUCTION
What is MP3?
How are MP3 files recorded
and played back?
MP3 is an abbreviation of Motion Picture Experts
Group (or MPEG) Audio Layer 3. MP3 is simply a
file format with a data compression ratio of 1:10
(128 Kbps*).
MP3 “files (tracks)” can be recorded in “folders”
—in PC terminology.
During recording, the files and folders can be
arranged in a way similar to arranging files and
folders of computer data.
“Root” is similar to the root of a tree. Every file
and folder can be linked to and be accessed from
the root.
* Bit rate is the average number of bits that one
second of audio data will consume. The unit used is
Kbps. To get a better audio quality, choose a higher
bit rate. The most popular bit rate for encoding is
128 Kbps.
The illustration below shows an example of how
MP3 files are recorded on a CD-R or CD-RW,
how they are played back, and how they are
searched for on this unit.
• For details information about the MP3
discs, refer to “A Guide to MP3/WMA”
(separate volume).
Compatible with ID3 Tag
Notes:
• This unit can read a CD-ROM containing MP3
files. However, if non-MP3 files are recorded
together with MP3 files, this unit will take a longer
time to scan the disc. It may also cause the unit to
malfunction.
Extra information data such as album title,
performer name, song title, recording year, music
genre and a brief comment can be stored within
an MP3 file.
• This unit cannot read or play an MP3 file without
the extension code <.mp3>.
• This unit is not compatible with MP3 file encoded
with Layer 1 and Layer 2 formats.
This unit can show both ID3v1 (Version 1) and
ID3v2 (version 2) tags on the display. (See page
19.)
• Some characters cannot be shown correctly.
• If both ID3v1 and ID3v2 are recorded on a
disc, ID3v2 information will be shown.
• This unit is not compatible with Playlist**.
**A playlist is a simple text file, used on a PC, which
enables users to make their own playback order
without physically rearranging the files.
Hierarchy
Level 1
ROOT
Level 2
Level 3
Level 4
Level 5
6
7
01
02
03
4
3
05
10
5
: Folder and their playback
order
01
11
12
04
1
8
9
: MP3 files and their playback
order
1
2
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 OPERATIONS
Refer also to “CD OPERATIONS” on pages 13 to
16.
The display changes to show the following:
Current source indication
Playing an MP3 disc
1 Open the control panel.
CD indicator
Note on One-Touch Operation:
Total folder
number
Total file
number
When a disc is already in the loading slot,
pressing CD CD-CH turns on the unit and starts
playback automatically.
2 Insert an MP3 disc into the loading
slot.
MP3 indicator
The unit turns on, draws
the disc and starts
playback automatically.
Ex.: When the disc contains 19 folders
and 144 MP3 files
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
3 Close the control panel by hand.
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 19.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
All files will be played repeatedly until you
stop playback.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
To stop play and eject the disc
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 26.
Press 0.
Playback stops and the control panel flips down.
The disc automatically ejects from the loading slot.
• When folder or file name is shown, current folder
number or the Tr indicator and current file number
also appear on the right side of the display.
To change the display information
While playing back an MP3 file, you can change
the MP3 disc information shown on the display.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes to show the
following:
Locating a file or a particular
portion on an MP3 disc
• When “TAG DISP” is set to “TAG ON”
(initial setting: see page 26)
To fast-forward or reverse the file
Press and hold ¢
while playing an MP3 disc, to
fast-forward the file.
Album name / performer
(folder name*)
(TAG lights up on the display)
Press and hold
disc, to reverse the file.
4 while playing an MP3
Track title (file name*)
(TAG lights up on the display)
Note:
Elapsed playing time and
Current file number
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
Clock and
Current file number
To skip to the next or previous files
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the TAG
indicator will not light up on the display.
Press ¢
briefly while
playing, to skip ahead to the
beginning of the next file.
Each time you press the
button consecutively, the
beginning of the next files is
located and played back.
• When “TAG DISP” is set to “TAG OFF”
Folder name
(
(
lights up on the display)
Press
4 briefly while playing, to skip back
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
File name
lights up on the display)
Elapsed playing time and
Current file number
Clock and
Current file number
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To go to a particular file quickly within the
current folder (+10 and –10 buttons)
To go to a particular folder directly
IMPORTANT:
1 Press MODE to enter the functions mode
To directly select the folders using the number
button(s), it is required that folders are
assigned 2 digit numbers at the beginning of
their folder names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If folder name is “01 ABC”
= Press 1 to go to Folder 01 ABC.
If folder name is “1 ABC,” pressing 1
does not work.
while playing an MP3 disc.
2 Press +10 or –10.
To skip 10 files* forwards to the
last file
If folder name is “12 ABC”
= Press and hold 6 (12) to go to Folder
12 ABC.
To skip 10 files* backwards to
the first file
Press the number button corresponding to the
folder number to start playing the first file in the
selected folder.
* First time you press +10 or –10 button, the
file skips to the nearest higher or lower file
with a file number of multiple ten (ex. 10th,
20th, 30th).
Then each time you press the button, you can
skip 10 files (see “How to use the +10 and
–10 buttons” below).
• After the last file, the first file will be
selected, and vice versa.
• To select a folder number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a folder number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
How to use the +10 and –10 buttons
• Ex. 1: To select file number 32 while
playing file number 6
Notes:
• If
indicator flashes on the display after you have
selected a folder, it means that the folder does not
contain any MP3 files.
(Three times)
(Twice)
• You cannot directly select a folder with a number
greater than 12.
File 6
\ 10 \ 20 \ 30
\ 31 \ 32
To select a particular file in a folder, press
• Ex. 2 : To select file number 8 while playing
¢
or
4 after selecting the folder.
file number 36
(Three times)
(Twice)
File 36 \ 30 \ 20 \ 10
\ 9 \ 8
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To skip to the next or previous folder
Active
indicator
Mode
Plays at random
Press 5 (up) while playing an MP3
disc to skip to the next folder.
Each time you press the button
consecutively, the next folder is
located (and the first file in the
folder starts playing, if recorded).
FLDR RND RND and
indicators
All files of the
current folder, then
files of the next
folder and so on.
light up.
DISC RND RND and
indicators
All files on the disc.
light up.
Press ∞ (down) while playing an MP3 disc to
skip back to the previous folder.
Each time you press the button consecutively,
the previous folder is located (and the first file in
the folder starts playing, if recorded).
To play back files repeatedly
(Track Repeat/Folder Repeat Play)
You can play back the current file or all the files
in the current folder repeatedly.
Note:
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
If the folder does not contain any MP3 files, it is
skipped.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT” or
“FLDR RPT” appears on the
display.
Selecting MP3 playback modes
To play back files at random
(Folder Random/Disc Random Play)
Each time you press the button,
the repeat play mode changes
as follows:
You can play back all files of the current folder or
all files on the MP3 disc at random.
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
TRK RPT
FLDR RPT
Canceled
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “FLDR RND” or
“DISC RND” appears on the
display.
Each time you press the button,
the random play mode changes
as follows:
RPT indicator
Ex.: When you select “TRK RPT”
FLDR RND
DISC RND
Active
Mode
Plays repeatedly
Canceled
indicator
TRK RPT RPT indicator The current (or
lights up. specified) file.
and RPT All files of the
FLDR RPT
indicators
light up.
current (or
specified) folder.
RND and
(folder) indicators
Ex.: When you select “FLDR RND”
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Selecting preset sound modes
Indication
For:
Preset values
BAS TRE LOUD
(C-EQ: custom equalizer)
USER
ROCK
(Flat sound)
00
00
OFF
ON
You can select a preset sound mode (C-EQ:
custom equalizer) suitable to the music genre.
Rock or
disco music
+03
+01
CLASSIC Classical
music
+01
–02
OFF
Select the sound mode you want.
POPS
Light music
+04
+02
+01
00
OFF
ON
Each time you press the
button, the sound modes
change as follows:
HIP HOP Funk or rap
music
JAZZ
Jazz music
+02
+03
OFF
USER
Note:
You can adjust each sound mode to your preference.
Once you make an adjustment, it is automatically
stored for the currently selected sound mode. See
“Adjusting the sound” on page 23.
ROCK
CLASSIC
POPS
HIP HOP
JAZZ
Indication pattern changes for each
sound mode except for “USER.”
Ex.: When you select “ROCK”
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
2 Adjust the setting.
You can adjust the sound characteristics to your
preference.
To increase the level or
turn on the loudness
1 Select the item you want to adjust.
To decrease the level or
turn off the loudness
Each time you press the
button, the adjustable
items change as follows:
Indication pattern changes as
you adjust the bass or treble.
BAS
FAD
TRE
(fader)
(bass)
(treble)
VOL
LOUD
BAL
(volume)
(loudness)
(balance)
Ex. 1: When you adjust “TRE” (treble)
Indication
To do:
Range
BAS*1
TRE*1
FAD*2
BAL
Adjust the bass.
Adjust the treble.
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
Ex. 2: When you turn on the loudness
3 Repeat steps 1 and 2 to adjust the
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
other items.
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
page 22.
LOUD*1
Boost low and high
frequencies to
LOUD ON
produce a well-
balanced sound
at low volume level.
|
LOUD OFF
VOL*3
Adjust the volume. 00 (min.)
|
30 or 50 (max.)*4
1
*
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the
currently selected sound mode (C-EQ) including
“USER.”
If you are using a two-speaker system, set the fader
level to “00.”
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
Depending on the amplifier gain control setting.
(See page 26 for details.)
2
3
*
*
4
*
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
Changing the general settings
(PSM)
3 Adjust the PSM item selected.
You can change the items listed in the table on
page 25 by using the PSM (Preferred Setting
Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 25.)
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the setting.
2 Select the PSM item you want to
adjust.
Ex.: When you select “DIMMER”
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferred Setting Mode (PSM) items
• For detailed operations of each PSM items, refer to the pages listed in the table.
Factory-preset See
Indications
Selectable values/items
DEMO OFF DEMO ON
1 – 12
settings
DEMO ON
1 (1:00)
00 (1:00)
ON
page
DEMO
Display demonstration
Hour adjustment
Minute adjustment
Level display
8
9
CLOCK H
CLOCK M
LEVEL
00 – 59
9
OFF
AUTO
ON
OFF
25
DIMMER
Dimmer mode
25
26
26
AUTO
ONCE
ON
SCROLL
EXT IN*
Scroll mode
ONCE
AUTO
OFF
External component
CHANGER
SIRIUS
LINE IN
CHANGER
TAG DISP
Tag display
TAG OFF
TAG ON
TAG ON
26
26
LOW PWR
HIGH PWR
HIGH PWR
AMP GAIN Amplifier gain control
* Displayed only when one of the following sources is selected—FM, AM, and CD.
To select the level meter—LEVEL
To select the dimmer mode—DIMMER
You can activate or deactivate the level meter
according to your preference.
When shipped from the factory, level meter is
activated.
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• ON:
• OFF:
Shows the audio level indicator.
Cancels the audio level indicator;
sound mode indicator is shown.
• AUTO:
• OFF:
• ON:
Activates Auto Dimmer.
Cancels Auto Dimmer.
Always dims the display.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
25
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the scroll mode—SCROLL
To turn the tag display on or off—TAG DISP
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
When shipped from the factory, scroll mode is set
to “ONCE.”
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
When shipped from the factory, “TAG ON” is
selected.
• ONCE:
• AUTO:
Scrolls only once.
Repeats the scroll (5-second
intervals in between).
Cancels scroll mode.
• OFF:
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (display) for more than
one second.
• If an MP3 file does not have ID3
tags, folder name and file
name appear.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)
To select the external component to use
—EXT IN
You can connect the external component to the
CD changer jack on the rear using an adapter
specially designed for the external component.
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
To select the amplifier gain control
—AMP GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select “LOW PWR”
to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is
selected.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN:
• SIRIUS:
Notes:
To use the external component
other than CD changer.
To use the JVC SIRIUS Radio.
• LOW PWR: You can adjust the volume level
from “VOL 00” to “VOL 30.”
Note:
If you change the setting from “HIGH
PWR” to “LOW PWR” while
listening at a volume level more than
30, the unit automatically changes the
volume level to “VOL 30.”
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• For connecting the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate volume).
• HIGH PWR:You can adjust the volume level
from “VOL 00” to “VOL 50.”
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the control panel
1 Insert the right side of the control
panel into the groove on the panel
holder.
Detaching the control panel
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
2 Press the left side of the control
1 Unlock the control panel.
panel to fix it to the panel holder.
2 Pull the control panel out of the unit.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
3 Put the detached control panel into
the provided case.
Connectors
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATIONS
We recommend that you use the JVC MP3-
compatible CD changer with your unit.
Playing discs
By using this CD changer, you can play back your
original CD-Rs (Recordable) and CD-RWs
(Rewritable) recorded either in audio CD format
or in MP3 format.
Select the CD changer (CD-CH).
CD
CD-CH*
• You can also connect other CH-X series CD
changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3
discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD changers
with this unit.
* If you have changed “EXT IN” setting to “LINE IN”
or “SIRIUS” (see page 26), you cannot select the CD
changer.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
Before operating your CD changer:
• Refer also to the Instructions supplied for
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display.
If this happens, remove the magazine and
set the discs correctly.
Selected disc number
•
If no magazine is loaded in the CD changer, “NO
MAG” appears on the display. If this happens,
insert the magazine in the CD changer.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection and make sure the cords are
connected firmly. Then, press the reset
button of the CD changer.
(folder) indicator
MP3 indicator
Selected folder
number
Note:
Folder name appears on the display instead of
“ROOT,” if an MP3 disc contains a folder.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the current disc is a CD:
Playback starts from the first track of the
current disc.
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
Selected disc number
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
Elapsed playing
time
Current track
number
To fast-forward or reverse the track/file
Press and hold ¢
,
during play, to fast-forward the
track/file.
Notes:
• When you press CD CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
Press and hold
the track/file.
4, during play, to reverse
• If you change the source, CD changer play also
stops. Next time you select the CD changer as the
source, CD changer play starts from where playback
has been stopped previously.
• When you start playing back a CD Text or MP3
disc, disc information will automatically appear on
the display. (See pages 16 and 19.)
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous tracks/files
Press ¢
briefly during
play, to skip ahead to the
beginning of the next track/file.
Each time you press the
button consecutively, the
beginning of the next tracks/
files is located and played
back.
Press
4 briefly during play, to skip back to
the beginning of the current track/file.
Each time you press the button consecutively, the
beginning of the previous tracks/files is located
and played back.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To skip to the next or previous folder
(only for MP3 discs)
This operation is only possible when
using JVC MP3-compatible CD changer
(CH-X1500).
Press 5 (up) while playing an
MP3 disc, to go to the next folder.
Each time you press the button
consecutively, the next folder is
located, and the first file in the
folder starts playback.
To go to a track/file quickly (+10 and –10
buttons)
1 Press MODE to enter the functions mode
while playing a disc.
Press ∞ (down) while playing an MP3 disc, to go
to the previous folder.
Each time you press the button consecutively, the
previous folder is located, and the first file in the
folder starts playback.
2 Press +10 or –10.
To skip 10 tracks/files*
forwards to the last track/file
To skip 10 tracks/files*
backwards to the first track/file
To show the disc information for CD Text
and MP3 discs
This is possible only when connecting a JVC CD
changer equipped with CD Text and/or MP3 disc
information reading capability.
* First time you press +10 or –10 button, the
track/file skips to the nearest higher or lower
track/file with a track/file number of multiple
ten (ex. 10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks/files (see “How to use the +10
and –10 buttons” below).
• After the last track/file, the first track/file will
be selected, and vice versa.
Select text display mode while playing a
CD Text or an MP3 disc.
Note:
If the current playing disc is an MP3 disc, files are
skipped within the same folder.
• For details, see page 16 about CD Text disc
information and page 19 about MP3 disc
information.
How to use the +10 and –10 buttons
• Ex. 1: To select track/file number 32 while
playing track/file number 6
(Three times)
(Twice)
Track/file 6 \ 10 \ 20 \ 30 \ 31 \ 32
• Ex. 2: To select track/file number 8 while
playing track/file number 36
(Three times)
Track/file 36 \ 30 \ 20 \ 10 \ 9 \ 8
(Twice)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back tracks/files repeatedly
(Track Repeat/Folder Repeat/Disc Repeat
Play)
Selecting the playback modes
To play back tracks/files at random
(Folder Random/Disc Random/Magazine
Random Play)
1 Press MODE to enter the
functions mode during play.
1 Press MODE to enter the
functions mode during play.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display.
Each time you press the button,
the repeat play mode changes
as follows:
2 Press RND (random), while
“MODE” is still flashing on the
display.
Each time you press the button,
the random play mode changes
as follows:
For MP3 discs:
TRK RPT
Canceled
FLDR RPT
DISC RPT
For MP3 discs:
FLDR RND
Canceled
DISC RND
MAG RND
For CDs:
TRK RPT
DISC RPT
For CDs:
Canceled
DISC RND
MAG RND
Canceled
(disc) and RPT indicators
Ex.: When you select “DISC RPT”
RND indicator
Ex.: When you select “MAG RND”
Note:
MP3 indicator also lights up if the current playing
disc is an MP3 disc.
Note:
MP3 indicator also lights up if the current playing
disc is an MP3 disc.
Active
indicator
Mode
Plays repeatedly
TRK RPT
RPT indicator The current (or
Active
indicator
Mode
Plays at random
lights up.
and RPT
indicators
light up.
specified) track/
file.
FLDR RND* RND and
indicators
All files of the
FLDR RPT*
All files of the
current (or
specified) folder
of the current disc.
current folder, then
files of the next
folder and so on.
light up.
DISC RND
MAG RND
RND and
indicators
light up.
All tracks/files of
the current (or
specified) disc.
DISC RPT
and RPT All tracks/files of
indicators light the current (or
up.
specified) disc.
RND indicator All tracks/files of
lights up. the inserted discs.
* “FLDR RPT” is only applicable for MP3 discs.
* “FLDR RND” is only applicable for MP3 discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
EXTERNAL COMPONENT OPERATIONS
Playing an external component 2 Turn on the connected component
and start playing the source.
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
3 Adjust the volume.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
4 Adjust the sound as you want. (See
use—EXT IN” on page 26.
pages 22 and 23.)
1 Select the external component
(LINE IN).
CD
LINE IN*
To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate
volume).
• If “LINE IN”* does not appear on the display, see
page 26 and select the external input (“LINE IN”).
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
on the power.
to turn
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Check the cords and
connections.
• This unit does not work
at all.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Signals are too weak.
Store stations manually.
• Static noise while
listening to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Insert the disc correctly.
• Disc cannot be played
back.
Disc is inserted upside down.
• CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
played back.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Disc cannot be ejected.
Disc is locked.
Unlock the disc.
(See page 16.)
• Disc sound is sometimes You are driving on rough roads.
interrupted.
Stop playback while driving on
rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and connections.
• “NO DISC” appears on
the display.
No disc in the loading slot.
Disc is inserted incorrectly.
Insert a disc into the loading
slot.
Insert the disc correctly.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
• Disc cannot be played
back.
No MP3 files are recorded on
the disc.
Change the disc.
MP3 files do not have the
extension code <.mp3> in their
file names.
Add the extension code
<.mp3> to their file names.
MP3 files are not recorded in
the format compliant with ISO
9660 Level 1, Level 2, Romeo,
or Joliet.
Change the disc.
(Record MP3 files using a
compliant application.)
• Noise is generated.
The file played back is not an
MP3 file (although it has the
extension code <.mp3>).
Skip to another file or change
the disc. (Do not add the
extension code <.mp3> to non-
MP3 files.)
• A longer readout time is
required (“CHECK”
keeps flashing on the
display).
Readout time varies due to the
complexity of the folder/file
configuration.
Do not use too many hierarchies
and folders. Also, do not record
any other types of audio tracks
together with MP3 files.
• Files cannot be played
back as you have
Playback order is determined
when the files are recorded.
intended them to play.
• Elapsed playing time is
not correct.
This sometimes occurs during
play. This is caused by how the
files are recorded on the disc.
•
indicator flashes on
the display.
The current folder does not
contain any MP3 file.
Select another folder.
• “NO FILES” appears on
the display.
The current disc does not
contain any MP3 file.
Insert a disc that contains MP3
files.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
Insert discs into the magazine.
Insert discs correctly.
• “NO DISC” appears on
the display.
No disc is in the magazine.
Discs are inserted upside down.
• “NO MAG” appears on
the display.
No magazine is loaded in the
CD changer.
Insert the magazine.
• “RESET 8” appears on
the display.
This unit is not connected to the
CD changer correctly.
Connect this unit and the
CD changer correctly and press
the reset button of the CD
changer.
• “RESET 1” – “RESET 7”
appears on the display.
Press the reset button of the
CD changer.
• The CD changer does
not work at all.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,
but will be annoying.
We recommend that you stop disc play while driving on such rough roads.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Handling discs
When playing a CD-R or CD-RW
Before playing back CD-Rs or CD-RWs, read
their instructions or cautions carefully.
• Use only “finalized” CD-Rs or CD-RWs.
• Some CD-Rs or CD-RWs may not be played
back on this unit because of their disc
characteristics, and for the following reasons:
– Discs are dirty or scratched.
– Moisture condensation on the lens inside the
unit.
– The pickup lens inside the unit is dirty.
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
• CD-Rs or CD-RWs are susceptible to high
temperatures or high humidity, so do not leave
them inside your car.
• Do not use following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
This unit has been designed to reproduce CDs,
CD-Rs (Recordable), CD-RWs (Rewritable), and
CD Texts.
• This unit is also compatible with MP3 discs.
How to handle discs
When removing a disc
from its case, press down
the center holder of the case
and lift the disc out, holding
it by the edges.
Center holder
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
– Discs on which labels can be directly printed
by an ink jet printer.
To keep discs clean
Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs. For example,
– Stickers or labels may shrink and warp a
disc.
– Stickers or labels may be peeled off so discs
cannot be ejected.
– Print on discs may get sticky.
A dirty disc may not be played
correctly. If a disc does become
dirty, wipe it with a soft cloth in a
straight line from center to edge.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub
the edges with a pencil or ball-point pen, etc.
Read instructions or cautions about labels and
printable discs carefully.
CAUTIONS:
• Do not insert 8 cm (3-3/16") discs (single CDs)
into the loading slot. (Such discs cannot be
ejected.)
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• Do not insert any disc of unusual shape—like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose discs to direct sunlight or any
heat source or place them in a place subject to
high temperature and humidity. Do not leave
them in a car.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may malfunction.
In this case, eject the disc and leave the unit turned
on for a few hours until the moisture evaporates.
Sticker
Stick-on
Sticker
residue
Warped
disc
Disc
label
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
CD PLAYER SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Type: Compact disc player
Front: 50 W per channel
Rear: 50 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8%
total harmonic distortion.
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 decoding format:
Rear: 19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8%
total harmonic distortion.
MPEG1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range
Max. Bit Rate: 320 Kbps
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
GENERAL
Power Requirement
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
(7-3/16" × 2-1/16" × 5-15/16")
Panel Size (approx.):
TUNER SECTION
Frequency Range
FM:
AM:
87.5 MHz to 107.9 MHz
530 kHz to 1 710 kHz
188 mm × 58 mm × 12 mm
(7-7/16" × 2-5/16" × 1/2")
Mass (approx.):
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
1.4 kg (3.1 lbs) (excluding accessories)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Design and specifications are subject to change
without notice.
Capture Ratio: 1.5 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
If a kit is necessary for your car, consult your
telephone directory for the nearest car audio
speciality shop.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
.jvcmobile.com
Visit us on-line for
Technical Support & Customer Satisfaction Survey.
US RESIDENTS ONLY
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to Reset
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
EN, SP, FR
1003KKSMDTJEIN
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
KD-AR400/KD-G400
Installation/Connection Manual
Manual de instalación/conexión
Manuel d’installation/raccordement
GET0189-002A
[J]
1003KKSMDTJEIN
EN, SP, FR
ENGLISH
ESPAÑOL
FRANÇAIS
This unit is designed to operate on 12 V DC, NEGATIVE ground Esta unidad está diseñada para funcionar con 12 V de CC, con
Cet appareil est conçu pour fonctionner sur des sources de
courant continu de 12 V à masse NEGATIVE. Si votre véhicule
n’offre pas ce type d’alimentation, il vous faut un convertisseur de
tension, que vous pouvez acheter chez un revendeur
d’autoradios JVC.
electrical systems. If your vehicle does not have this system, a
voltage inverter is required, which can be purchased at JVC car
audio dealers.
sistemas eléctricos de masa NEGATIVA. Si su vehículo no
posee este sistema, será necesario un inversor de tensión, que
puede ser adquirido en los concesionarios de JVC de equipos
de audio para automóviles.
Parts list for installation and connection
The following parts are provided with this unit.
After checking them, please set them correctly.
Lista de piezas para instalación y conexión
Con esta unidad se suministran las siguientes piezas.
Después de inspeccionarlas, colóquelas correctamente.
Liste des pièces pour l’installation et
raccordement
Les pièces suivantes sont fournies avec cet appareil.
Après vérification, veuillez les placer correctement.
A / B
Hard case/Control panel
Estuche duro/Panel de
control
C
D
E
F
Sleeve
Cubierta
Manchon
Trim plate
Placa de guarnición
Plaque d’assemblage
Power cord
Cordón de alimentación
Cordon d’alimentation
Remote controller
Mando a distancia
Télécommade
Etui de transport/Panneau
de commande
G
H
I
J
K
L
Washer (ø5)
Arandela (ø5)
Rondelle (ø5)
Lock nut (M5)
Tuerca de seguridad (M5)
Ecrou d’arrêt (M5)
Mounting bolt—M5 x 20 mm (M5 x 13/16")
Perno de montaje—M5 x 20 mm
(M5 x 13/16 pulgada)
Rubber cushion
Cojín de goma
Amortisseur en caoutchouc
Handles
Manijas
Poignées
Battery
Pila
Pile
CR2025
Boulon de montage—M5 x 20 mm
(M5 x 13/16 pouces)
INSTALLATION
(IN-DASH MOUNTING)
INSTALACION (MONTAJE EN EL
TABLERO DE INSTRUMENTOS)
INSTALLATION (MONTAGE DANS LE
TABLEAU DE BORD)
The following illustration shows a typical installation. If you have
any questions or require information regarding installation kits,
consult your JVC car audio dealer or a company supplying kits.
• If you are not sure how to install this unit correctly, have it
installed by a qualified technician.
La siguiente ilustración muestra una instalación típica. Si tiene
alguna pregunta o necesita información acerca de las
herramientas para instalación, consulte con su concesionario de kits d’installation, consulter votre revendeur d’autoradios JVC ou
JVC de equipos de audio para automóviles o a una compañía
que suministra tales herramientas.
• Si usted no está seguro de cómo instalar correctamente la
unidad, hágala instalar por un técnico cualificado.
L’illustration suivante est un exemple d’installation typique. Si
vous avez des questions ou avez besoin d’information sur des
une compagnie d’approvisionnement.
• Si l’on n’est pas sûr de pouvoir installer correctement cet
appareil, le faire installer par un technicien qualifié.
3
2
4
1
3
Do the required electrical connections.
Realice las conexiones eléctricas
requeridas.
B
D
Réalisez les connexions électriques.
184 mm
(7-1/4")
J
53 mm
(2-1/8")
1
C
2
I
K
4
1
1
1
*
*
*
When you stand the unit, be
careful not to damage the fuse on
the rear.
Al poner la unidad vertical, tenga
cuidado de no dañar el fusible
provisto en la parte posterior.
Lorsque vous mettez l’appareil à
la verticale, faire attention de ne
pas endommager le fusible situé
sur l’arrière.
5
Bend the appropriate tabs to hold the
sleeve firmly in place.
6
Doble las lengüetas apropiadas para
retener firmemente la manga en su
lugar.
C
D
*1
Tordez les languettes appropriées
pour maintenir le manchon en place.
B
Removing the unit
Before removing the unit, release the rear section.
Extracción de la unidad
Antes de extraer la unidad, libere la sección trasera.
Retrait de l’appareil
Avant de retirer l’appareil, libérer la section arrière.
Insert the two handles, then pull them as illustrated so that the
unit can be removed.
Inserte las dos manijas y, a continuación, extráigalas de la
manera indicada en la ilustración para poder desmontar la
unidad.
1
2
3
B
D
Insérez les deux poignées, puis tirez de la façon illustrée de
façon à retirer l’appareil.
K
1
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the optional stay / Cuando emplea un soporte
opcional / Lors de l’utilisation du hauban en option
When installing the unit without using the sleeve / Instalación de la unidad sin utilizar
la cubierta / Lors de l’installation de l’appareil scans utiliser de manchon
In a Toyota for example, first remove the car radio and install the unit in its place.
En un Toyota por ejemplo, primero retire la radio del automóvil y luego instale la unidad en su lugar.
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.
Fire wall
Tabique a prueba
de incendios
Cloison
Stay (option)
Soporte (opción)
Hauban (en option)
* Not included with this unit.
* No suministrado con esta unidad.
Flat type screws—M5 x 8 mm (M5 x 3/8")*
Tornillos tipo plano—M5 x 8 mm (M5 x 3/8 pulgada)*
Vis à tête plate—M5 x 8 mm (M5 x 3/8 pouces)*
* Non fourni avec cet appareil.
G
H
I
Dashboard
Tablero de instrumentos
Tableau de bord
Screw (option)
Tornillo (opción)
Vis (en option)
Bracket*
Ménsula*
Support *
Flat type screws—M5 x 8 mm
(M5 x 3/8")*
Tornillos tipo plano—M5 x 8 mm
(M5 x 3/8 pulgada)*
Vis à tête plate—M5 x 8 mm
(M5 x 3/8 pouces)*
C
Pocket
Compartimiento
Poche
Bracket*
Ménsula*
Support *
Note
Nota
: When installing the unit on the mounting bracket, make sure to use the 8 mm (3/8") -long screws. If
longer screws are used, they could damage the unit.
: Cuando instala la unidad en la ménsula de montaje, asegúrese de utilizar los tornillos de 8 mm
(3/8 pulgada) de longitud. Si se utilizan tornillos más largos, éstos pueden dañar la unidad.
Install the unit at an angle of less than 30˚.
Instale la unidad a un ángulo de menos
de 30˚
Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une
longueur de 8 mm (3/8 pouces). Si des vis plus longues sont utilisées, elles peuvent endommager
l’appareil.
Installez l’appareil avec un angle de moins
de 30˚.
ELECTRICAL CONNECTIONS
CONEXIONES ELECTRICAS
RACCORDEMENTS ELECTRIQUES
Pour éviter tout court-circuit, nous vous recommandons de
débrancher la borne négative de la batterie et d’effectuer tous les
raccordements électriques avant d’installer l’appareil.
• Assurez-vous de raccorder de nouveau la mise à la masse
de cet appareil au châssis de la voiture après l’installation.
To prevent short circuits, we recommend that you disconnect the Para evitar cortocircuitos, recomendamos que desconecte el
battery’s negative terminal and make all electrical connections
before installing the unit.
• Be sure to ground this unit to the car’s chassis again after
installation.
terminal negativo de la batería y que efectúe todas las
conexiones eléctricas antes de instalar la unidad.
• Asegúrese de volver a conectar a masa esta unidad al
chasis del automóvil después de la instalación.
Notes:
Notas:
Remarques:
• Replace the fuse with one of the specified rating. If the fuse
blows frequently, consult your JVC car audio dealer.
• It is recommended to connect to the speakers with maximum
• Reemplace el fusible por uno con la corriente especificada. Si • Remplacer le fusible par un de la valeur précisée. Si le fusible
el fusible se quemase frecuentemente consulte con su
concesionario de JVC de equipos de audio para automóviles.
power of more than 50 W (both at the rear and at the front, with • Se recomienda conectar los altavoces con una potencia
saute souvent, consulter votre revendeur d’autoradios JVC.
• Il est recommandé de connecter des enceintes avec une
puissance de plus de 50 W (les enceintes arrière et les
enceintes avant, avec une impédance comprise entre
4 Ω et 8 Ω). Si la puissance maximum est inférieure à 50 W,
changez “AMP GAIN” pour éviter d’endommager vos enceintes
(voir page 26 du MANUEL D’INSTRUCTIONS).
• Pour éviter les court-circuits, couvrir les bornes des fils qui ne
sont PAS UTILISÉS avec de la bande isolante.
• Le dissipateur de chaleur devient très chaud après usage. Faire
attention de ne pas le toucher en retirant cet appareil.
an impedance of 4 Ω to 8 Ω). If the maximum power is less
than 50 W, change “AMP GAIN” setting to prevent the speakers
from being damaged (see page 26 of the INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of the UNUSED
leads with insulating tape.
máxima de más de 50 W (tanto atrás como adelante, con una
impedancia de 4 Ω a 8 Ω). Si la potencia máxima es de menos
de 50 W, cambie “AMP GAIN” para evitar daños en los
altavoces (consulte la página 26 del MANUAL DE
INSTRUCCIONES).
• The heat sink becomes very hot after use. Be careful not to
touch it when removing this unit.
• Para evitar cortocircuitos, cubra los cables NO UTILIZADOS
con cinta aislante.
• El sumidero térmico estará muy caliente después del uso.
Asegúrese de no tocarlo al desmontar esta unidad.
Heat sink
Sumidero térmico
Dissipateur de chaleur
PRECAUCIONES sobre las conexiones de la fuente PRECAUTIONS sur l’alimentation et la connexion
PRECAUTIONS on power supply and speaker
connections:
• DO NOT connect the speaker leads of the power cord to
the car battery; otherwise, the unit will be seriously
damaged.
de alimentación y de los altavoces:
• NO conecte los conductores de altavoz del cable de
alimentación a la batería de automóvil, pues podrían
producirse graves daños en la unidad.
des enceintes:
• NE CONNECTEZ PAS les fils d’enceintes du cordon
d’alimentation à la batterie; sinon, l’appareil serait
sérieusement endommagé.
• ANTES de conectar a los altavoces los conductores de altavoz • AVANT de connecter les fils d’enceintes du cordon
• BEFORE connecting the speaker leads of the power cord to
del cable de alimentación, verifique el conexionado de altavoz
de su automóvil.
d’alimentation aux enceintes, vérifiez le câblage des enceintes
de votre voiture.
the speakers, check the speaker wiring in your car.
+
+
+
+
-
+
-
+
-
L
L
L
-
-
-
+
+
+
+
-
+
-
+
-
R
R
R
-
-
-
TROUBLESHOOTING
• The fuse blows.
LOCALIZACION DE AVERIAS
• El fusible se quema.
EN CAS DE DIFFICULTES
• Le fusible saute.
* Are the red and black leads connected correctly?
* ¿Están los conductores rojo y negro correctamente
conectados?
* Les fils rouge et noir sont-ils racordés correctement?
• Power cannot be turned on.
• L’appareil ne peut pas être mise sous tension.
* Is the yellow lead connected?
• No es posible conectar la alimentación.
* Le fil jaune est-elle raccordée?
* ¿Está el cable amarillo conectado?
• No sound from the speakers.
• Pas de son des enceintes.
* Is the speaker output lead short-circuited?
• No sale sonido de los altavoces.
* Le fil de sortie d’enceinte est-il court-circuité?
* ¿Está el cable de salida del altavoz cortocircuitado?
• Sound is distorted.
• Le son est déformé.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
• El sonido presenta distorsión.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-elles mises
ensemble à la masse?
* ¿Está el cable de salida del altavoz conectado a masa?
* ¿Están los terminales “–” de los altavoces L y R conectados a
una masa común?
• Noise interfere with sounds.
• Interférence avec les sons.
* Is the rear ground terminal connected to the car’s chassis using
shorter and thicker cords?
• Perturbación de ruido.
* ¿El terminal de tierra trasero está conectado al chasis del
automóvil utilizando los cordones más corto y más grueso?
* La prise arrière de mise à la terre est-elle connectée au châssis
de la voiture avec un cordon court et épais?
• Unit becomes hot.
• L’appareil devient chaud.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
• La unidad se calienta.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-elles mises
ensemble à la masse?
* ¿Está el cable de salida del altavoz conectado a masa?
* ¿Están los terminales “–” de los altavoces L y R conectados a
una masa común?
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
ESPAÑOL
FRANÇAIS
Typical Connections / Conexiones tipicas / Raccordements typiques
A
Before connecting: Check the wiring in the vehicle carefully.
Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the graves en la unidad.
Antes de la conexión: Verifique atentamente el conexionado
del vehículo. Una conexión incorrecta podría producir daños
Avant de commencer la connexion: Vérifiez attentivement le
câblage du véhicule. Une connexion incorrecte peut
endommager sérieusement l’appareil.
car body may be different in color.
Los cordones del cable de alimentación y los del conector
procedentes de la carrocería del automóvil podrían ser de
diferentes en color.
Le fil du cordon d’alimentation et ceux des connecteurs du
châssis de la voiture peuvent être différents en couleur.
1 Connect the colored leads of the power cord in the order
specified in the illustration below.
1 Connectez les fils colorés du cordon d’alimentation dans
l’ordre spécifié sur l’illustration ci-dessous.
1 Conecte los conductores de color del cable de alimentación
2 Connect the antenna cord.
3 Finally connect the wiring harness to the unit.
en el orden especificado en la ilustración de abajo.
2 Connectez le cordon d’antenne.
3 Finalement, connectez le faisceau de fils à l’appareil.
2 Conecte el cable de antena.
3 Por último, conecte el cable de alimentación a la unidad.
To CD changer or another external component
(see diagram
Al cambiador de CD otro componente externo
(véase diagrama
Au changeur de CD ou à un autre appareil extérieur
(voir le diagramme
Only for KD-AR400
Sólo para KD-AR400
Seluement pour le KD-AR400
)
)
)
Rear ground
terminal
Terminal de tierra
posterior
Borne arrière de
masse
15 A fuse
Fusible de 15 A
Fusible 15 A
15
1
1
1
*
*
*
Not included with this unit
No suministrado con esta unidad.
Non fourni avec cet appareil.
Ignition switch
Interruptor de encendido
Interrupteur d’allumage
Line out (see diagram
)
Salida de línea
(véase diagrama
Sortie de ligne
)
Antenna terminal
Terminal de la antena
Borne de l’antenne
1
(voir le diagramme
)
Black
Negro
Noir
1
*
To metallic body or chassis of the car
A un cuerpo metálico o chasis del automóvil
Vers corps métallique ou châssis de la voiture
3
1
*
1
2
2
Yellow*2
Amarillo*2
Jaune*2
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
A un terminal activo del bloque de fusibles conectado a la batería del
automóvil (desviando el interruptor de encendido) (12 V constantes)
A une borne sous tension du porte-fusible connectée à la batterie de
la voiture (en dérivant l’interrupteur d’allumage) (12 V constant)
Fuse block
Bloque de fusibles
2
*
*
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
Porte-fusible
2
2
Antes de comprobar el funcionamiento de esta unidad
previa a de la instalación, es necesario conectar este
cable, de lo contrario no se podrá conectar la
alimentación.
Pour vérifier le fonctionnement de cet appareil avant
installation, ce fil doit être raccordé, sinon l’appareil ne
peut pas être mis sous tension.
*
Red
Rojo
Rouge
To an accessory terminal in the fuse block
A un terminal accesorio del bloque de fusibles
Vers borne accessoire du porte-fusible
3
Blue with white stripe
Azul con rayas blancas
Bleu avec bande blanche
To the remote lead of other equipment or automatic antenna if any (200 mA max.)
Al conductor remoto de otro equipo o de la antena automática, si hubiere
(máx. 200 mA)
4
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a
une (200 mA max.)
Orange with white stripe
Naranja con rayas blancas
Orange avec bande blanche
(ILLUMINATION)
To car light control switch
Al interruptor de control de las luces del automóvil
À l’interrupteur d’éclairage de la voiture
5
6
White with black stripe
Blanco con rayas
negras
White Gray with black stripe
Blanco Gris con rayas negras
Blanc Gris avec bande noire
Gray
Gris
Gris
Green with black stripe
Verde con rayas negras
Vert avec bande noire
Green
Verde
Vert
Purple with black stripe
Púrpura con rayas negras
Violet avec bande noire
Purple
Púrpura
Violet
Blanc avec bande noire
Left speaker (front)
Altavoz izquierdo (frontal)
Enceinte gauche (avant)
Right speaker (front)
Altavoz derecho (frontal)
Enceinte droit (avant)
Left speaker (rear)
Altavoz izquierdo (trasero)
Enceinte gauche (arrière)
Right speaker (rear)
Altavoz derecho (trasero)
Enceinte droit (arrière)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections Adding Other Equipment / Conexiones para añadir otros equipos / Raccordement pour ajouter d’autres appareils
B
Amplifier / Amplificador / Amplificateur
Usted podrá conectar un amplificador y otros equipos para
mejorar el sistema estéreo de su automóvil.
• Conecte el conductor remoto (azul con rayas blancas) al
conductor remoto del otro equipo para poderlo controlar a
través de esta unidad.
Vous pouvez connecter un amplificateur ou autre appareil pour
améliorer votre système autoradio.
• Connectez le fil de commande à distance (bleu avec bande
blanche) au fil de commande à distance de l’autre appareil de
façon qu’il puisse être commandé via cet appareil.
• Pour l’amplificateur seulement:
You can connect an amplifier and other equipment to upgrade
your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote
lead of the other equipment so that it can be controlled
through this unit.
• Sólo para el amplificador:
• For amplifier only:
Desconecte los altavoces de esta unidad y conéctelos al
amplificador. Los cables de los altavoces de esta unidad
quedan sin usar.
Déconnectez les enceintes de cet appareil et connectez-
les à l’amplificateur. Laissez les fils d’enceintes de cet
appareil inutilisés.
Disconnect the speakers from this unit, connect them to
the amplifier. Leave the speaker leads of this unit unused.
Rear speakers
Altavoces posteriores
Enceintes arrière
Remote lead
Cable remoto
Fil d’alimentation à distance
Y-connector (not supplied with this unit)
Conector en Y (no suministrado con esta unidad)
Connecteur Y (non fourni avec cet appareil)
INPUT
JVC Amplifier
Amplificador de JVC
JVC Amplificateur
L
L
R
R
3
*
Remote lead (Blue with white stripe)
Cable remoto (Azul con rayas blancas)
Fil d’alimentation à distance (Bleu avec bande blanche)
To the remote lead of other equipment or automatic antenna if any
OUT
LINE
Al conductor remoto de otro equipo o de la antena automática, si hubiere
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une
L
L
KD-AR400
KD-G400
R
R
FRONT
REAR
3
*
*
*
Firmly attach the ground wire to the metallic
body or to the chassis of the car—to the place
not coated with paint (if coated with paint,
remove the paint before attaching the wire).
Failure to do so may cause damage to the unit.
Fije firmemente el cable de tierra a la carrocería
metálica o al chasis—a un lugar no cubierto
con pintura (si está cubierto con pintura, quítela
antes de fijar el cable). De lo contrario, se
podrían producir daños en la unidad.
Attachez solidement le fil de mise à la masse au
châssis métallique de la voiture—à un endroit
qui n’est pas recouvert de peinture (s’il est
recouvert de peinture, enlevez d’abord la
peinture avant d’attacher le fil). L’appareil peut
être endommagé si cela n’est pas fait
Signal cord (not supplied with this unit)
Cable de señal (no suministrado con esta unidad)
Cordon de signal (non fourni avec cet appareil)
Front speakers
Altavoces delanteros
Enceintes avant
3
Only for KD-AR400 / Sólo para KD-AR400 / Seluement pour le KD-AR400
You can connect another power amplifier for front
speakers.
Podrá conectar otro amplificador de potencia
para los altavoces delanteros.
Vous pouvez connecter un autre amplificateur de
puissance pour les enceintes avant.
INPUT
3
Front speakers
Altavoces delanteros
Enceintes avant
L
JVC Amplifier
Amplificador de JVC
JVC Amplificateur
L
R
R
3
*
correctement.
CD Changer / Cambiador de CD / Changeur CD
Refer also to page 28 of the INSTRUCTIONS.
Consulte también la página 28 de las MANUAL
DE INSTRUCCIONES.
Référez-vous aussi à la page 28 du MANUEL
D’INSTRUCTIONS.
Connecting cord supplied for your CD changer
Cable de conexión suministrado con su cambiador de CD
Cordon de connexion fourni avec votre changeur CD
CAUTION / PRECAUCION / PRECAUTION
• Before connecting the CD changer, make sure that the unit
is turned off.
• Antes de conectar el cambiador de CD, asegúrese de que
la unidad esté apagada.
• Avant de connecter le changeur CD, s’assurer que l’unité
JVC CD changer
Cambiador de CD de JVC
Changeur CD JVC
est éteinte.
Only for KD-AR400
Sólo para KD-AR400
Seluement pour le KD-AR400
KD-AR400
KD-G400
External Component / Componente exterior / Appareil extérieur
For connecting the JVC SIRIUS
KS-U57 *4
Radio, refer to the SIRIUS Radio
Setup Manual (separate
volume).
L
L
L
L
External component
Para la conexión de la radio
JVC SIRIUS, consulte el Manual
de configuración de la radio
SIRIUS (volumen separado).
Pour brancher la radio JVC
SIRIUS, référez-vous au Manuel
d’installation de la radio SIRIUS
(volume séparé).
Componente exterior
Appareil extérieur
KD-AR400
KD-G400
R
R
R
R
CD changer jack
Jack para el cambiador de CD
Prise du changeur CD
Signal cord (not supplied with this unit)
Cable de señal (no suministrado con esta unidad)
Cordon de signal (non fourni avec cet appareil)
4
4
4
*
*
*
Line Input Adapter KS-U57 (not supplied with this
unit)
Adaptador de entrada de línea KS-U57 (no
suministrado con esta unidad)
Adaptateur d’entrée de ligne KS-U57 (non fourni
avec cet appareil)
Only for KD-AR400
Sólo para KD-AR400
Seluement pour le KD-AR400
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|