JVC Printer GV HT1 User Manual

MINI VIDEO PRINTER

ENGLISH

GV-HT1

Please visit our CyberCam Homepage on

the World Wide Web and answer our Con-

sumer Survey (in English only):

http://www.jvc-victor.co.jp/index-e.html

INS TRUCTIONS

LYT0140-001A

Download from Www.Somanuals.com. All Manuals Search And Download.

So m e Do 's An d Do n 'ts O n Th e Sa fe

Use O f Eq u ip m e n t

This equipment has been designed and manufactured to meet international safety standards

but, like any electrical equipment, care must be taken if you are to obtain the best results and

safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and

interconnections between pieces of equipment) are properly made and in accordance with

the manufacturer's instructions. Switch off and withdraw the mains plug when making or

changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of

your equipment.

DO be careful with glass panels or doors on equipment.

DON'T continue to operate the equipment if you are in any doubt about it working normally,

or if it is damanged in any way — switch off, withdraw the mains plug and consult

your dealer.

DON'T remove any fixed cover as this may expose dangerous voltages.

DON'T leave equipment switched on when it is unattended unless it is specifically stated that it

is designed for unattended operation or has a standby mode. Switch off using the

switch on the equipment and make sure that your family knows how to do this. Special

arrangements may need to be made for infirm or handicapped people.

DON'T use equipment such as personal stereos or radios so that you are distracted from the

requirements of road safety. It is illegal to watch television whilst driving.

DON'T listen to headphones at high volume, as such use can permanently damage your

hearing.

DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON'T use makeshift stands and NEVER fix legs with wood screws — to ensure complete

safety always fit the manufacturer's approved stand or legs with the fixings provided

according to the instructions.

DON'T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL...

—

NEVER let anyone especially children push anything into holes, slots or any other

opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be

safe than sorry!

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTIONS

Exercise caution when moving the printer. If you

drop the unit, do not attempt to use it. If during use

you notice that the cabinet

is damaged, shut the

ABOUT THERMAL HEADS

• The thermal heads, necessary for printing, are located

within the unit. The heads can become extremely

warm. To prevent possible burns and injuries, do not

touch the thermal heads.

printer down, remove

power supply unit it and

contact your JVC dealer.

Use of the printer under

these conditions can lead

• When the printer is used for extended periods, the

thermal heads experience wear and tear just like VCR

heads. As the thermal heads become worn, print

quality will gradually decrease. When you notice a

decline in quality, it is possible that the heads may

need to be replaced. Consult your JVC dealer.

to fire or electric shock.

DUST

DO NOT place heavy objects on the AC power

adapters cords, or leave the cord near any heat-

generating appliance, as this can damage the cords.

Avoid excessive pulling or twisting of the power

cords. If the power cords

Due to dust or lint adhering to print paper, or to

extreme variations in temperature, a small degree of

colour smearing or lines may be visible in prints.

becomes cut or otherwise

damaged, contact your JVC

dealer. When unplugging the

AC power adapter, DO NOT

pull on the cord. Hold the

plug itself and remove it from

the AC outlet. Use of the

printer with a damaged power

cord can lead to fire, electric

Failure to heed the following precautions may

result in damage to the printer.

1. DO NOT place the printer . . .

... in an environment prone to extreme temperatures

or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields

are generated.

... on a surface that is unstable or subject to

vibration.

shock and unit malfunctions.

2. DO NOT place heavy objects on the printer.

3. DO NOT place anything which might spill on top of

the printer.

4. AVOID violent shocks to the printer during

transport.

DO NOT remove the cover and attempt to repair or

modify the printer. There are high-voltage

components within the

unit, and the risk of

electric shock and unit

malfunctions exists. If a

problem occurs, contact

your JVC dealer.

CAUTION:

Changes or modifications not approved by JVC

could void user’s authority to operate the

equipment.

Illustrations of this printer may differ slightly

from production models.

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTIONS

About Batteries

Battery Packs

DANGER! Do not attempt to take the batteries

apart, or expose them to flame or excessive heat, as

there is a risk of fire or explosion.

The supplied battery pack is a

lithium-ion battery. Before

using the supplied battery pack

or an optional battery pack, be

sure to read the following

cautions:

WARNING! Do not allow the battery terminals, or

the battery itself, to come in contact with metals, as

this can result in a short circuit and possibly start a

fire.

Terminals

1. Turn on the power.

2. Set “save mode” to “off” and remove the batteries

when the power is automatically turned off.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but possess a

large power capacity. However, when the battery

pack becomes cool in an environment subject to

cold temperatures (below 10°C), the battery pack

has a characteristic that its usage time becomes

shorter and may cease to function. If this happens,

place the battery pack in your pocket or other

warm, protected place for a short time, then re-

attach it to the camcorder. As long as the battery

pack itself is not cold, it should not affect perform-

ance.

1. To avoid hazard . . .

.... do not burn.

.... do not short-circuit the terminals.

.... do not modify or disassemble.

.... do not expose the battery to temperatures

exceeding 60°C, as this may cause the

battery to overheat, explode or catch fire.

.... use only specified chargers.

2. To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where tempera-

tures are within the tolerances shown in the

chart below. This is a chemical reaction type

battery—cooler temperatures impede

(If you’re using some kind of heating pad, make

sure the battery pack does not come in direct

contact with the pad.)

chemical reaction, while warmer tempera-

tures can prevent complete charging.

.... store in a cool, dry place. Extended exposure

to high temperatures will increase natural

discharge and shorten service life.

.... fully charge and then fully discharge the

battery once a year when storing the battery

pack over a long period time.

.... remove from charger or powered unit when

not in use, as some machines use current

even when switched off.

Lithium-ion is vulnerable in colder temperatures.

N O TES:

● It is normal for the battery pack to be warm after

charging, or after use.

Temperature Range Specifications

Charging ................................ 10°C to 35°C

Operation .............................. 0°C to 40°C

Storage .................................. –10°C to 30°C

● Recharging time is based on room temperature of

20°C.

● The lower the temperature, the longer recharging

takes.

Download from Www.Somanuals.com. All Manuals Search And Download.

• This printer uses the following program

Serious malfunctioning

under license from Okaya Systemware Co.,

Ltd. for IrDA infrared transmission:

IrDA Protocol Stack “Deep Core^TM” Okaya

Systemware Co., Ltd.

If malfunctioning occurs, stop using the unit

immediately and consult your local JVC dealer.

The printer is a microcomputer-controlled

device. External noise and interference (from a

TV, a radio, etc.) might prevent it from function-

ing properly. In such cases, first disconnect its

power supply unit (battery pack, AC Power

Adapter/Battery Charger, etc.) and then re-

connect it and proceed as usual from the

beginning.

N O TICE

Co p y rig h t

Use of images imported from television broadcasts

and recorded materials for other than personal

enjoyment without permission from the copyright

owner constitutes an infringement on applicable

Sa m p le Im a g e s

The sample images supplied with this printer are

used under license from Kodak Japan Co., Ltd. who

is the copyright owner.

The image samples provided with this printer are

Photo CD images from the Kodak Photo CD

Sampler with FILM that were processed as

described below using Adobe Photoshop 3.0J.

The original 768 x 512 image was trimmed to 598 x

488 and compressed using the JPEG format before

recording.

Kodak Photo CD Sampler with FILM No. 2

“Marine” 18

Note:

• Note that prints of camcorder or Digital Still

Camera images will not be as sharp as prints of

the sample images.

• Company names and product names mentioned in

this manual are the logos or registered trademarks

of respective company.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAJOR FEATURES

This equipment is a portable printer that is light enough to bring along with a camcorder or

digital still camera on a trip or outing.

It can be used in a wide variety of applications.

Ea sy to re a d LCD Disp la y

The messages and icons displayed on the LCD

panel show at a glance the operating state of the

printer.

Prin tin g fro m Ca m co rd e r

Any camcorder with an output terminal can be

connected to the printer for instant printing of the

desired photo anywhere.

Co rd le ss co n n e ctio n to d ig ita l still

ca m e ra s

This printer offers cordless connection to any

digital still camera conforming to the infrared

image transmission (IrTran-P) standard.

Ba tte ry p o w e re d fo r p o rta b le

o p e ra tio n

Load the battery and you are ready to provide your

friends with instant printouts of pictures taken at

parties or outdoors.

In p u t fo r PC Co n n e ctio n

Used with optional software, this printer connects

to a Windows^®PC communications port (RS-232C)

or Macintosh communications port

(RS-422) for printing images.

Download from Www.Somanuals.com. All Manuals Search And Download.

You can print the picture of your choice on standard paper, stickers.

A number of special effects are available in addition to normal printing.

Mu ltip ix

On a page you can print 2, 6 or 8 images.

Ca le n d a r Prin tin g

You can use pictures of your choice to print your own calendar.

1 2

1 9 9 8

SUN MON TUE WED THU FRI SAT

1 0 1 1 1 2

1 3 1 4 1 5 1 6 1 7 1 8 1 9

2 0 2 1 2 2 2 3 2 4 2 5 2 6

2 7 2 8 2 9 3 0 3 1

Fra m e Prin t

Internal frames can be superimposed on an image for printing stickers.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

CAUTIONS

MAJOR FEATURES

CONTROLS, INDICATORS AND CONNECTORS

Front View .................................................................................... 10

Rear View ..................................................................................... 11

Bottom View .................................................................................. 11

Operation buttons ............................................................................ 12

Memory and Print Operations .............................................................. 12

Selecting and setting menu items .......................................................... 12

Menu Setting List ............................................................................. 13

CONECTIONS (Video Connections)

Printing from source with video output terminals ....................................... 14

CONNECTIONS (IrDA Reception)

Printing from a digital still camera with IrTran-P ........................................ 15

SUPPLYING THE POWER

Charging the Battery......................................................................... 16

Loading the Battery .......................................................................... 17

Using AC power .............................................................................. 17

INSTALLATION OF INK CASSETTE

Installing the Ink cassette ................................................................... 18

LOADING THE BLANK PAPER

Loading Blank Paper ......................................................................... 20

PREPARATION

PRINTING FROM VIDEO SOURCE WITH VIDEO TERMINALS

PRINTING FROM IrTran-P EQUIPPED DIGITAL STILL CAMERA 24

MISCELLANEOUS PRINTING OPERATIONS

Superimposing the Frame of Choice on the Image – Frame Printing – ................ 26

Printing Multiple Images on the Same Paper – MULTI Print – ......................... 28

Combining Image and Calendar – Calendar Printing –................................... 30

Printing Using Special Effects – Special Effects – ........................................ 32

Manual Feed .................................................................................. 34

Printing Reversed Images – Mirror Images – ............................................ 36

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTMENTS

Adjusting Image Quality – Adjustments before Printing –.............................. 37

Saving Energy – Save Mode –.............................................................. 38

Switching between motion Picture and Still Picture – Memory Mode Selections – ... 39

TROUBLESHOOTING

SPECIFICATIONS

INDEX

PRO VIDED ACCESSO RIES

AC adapter/Charger AA-V68

DC cord,

approx. 0.8 m

Battery Pack BN-V607

(battery)

Video cable 1

Video cable 2

Soft case

Printing paper

Ink cassette

Blank Paper Sheet Set

• Standard Print Paper (6 sheets)

• Sticker paper (6 sheets)

• Ink Cassette (12 prints)

It should be noted that it may be unlawful to print from pre-recorded tapes or discs without

the consent of the owner of copyright in the video recording, broadcast or cable programme

and in any literary, dramatic, musical, or artistic work embodied therein.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS, INDICATORS AND CONNECTORS

Fro n t Vie w

LCD Panel

Displays messages and icons

during operation to indicate

printer operating status.

MENU Button

Turns menu items on and off.

MEMORY/SELECT Button

MEMORY Button

Display

Function

See page

Message field

Indicates menu settings and printer status.

Press to store an input image.

13, 40

SELECT Button

Selects menu items.

Indicates remaining battery power.

–

PRINT/SET Button

PRINT Button

Press this button after storing an

image to print it.

SET Button

Press to change setup items.

Lights when a print error has occurred.

The message field indicates the nature of

the error.

Lights when still image memory mode

has been selected.

Lights to indicate that an image has been

stored in the printer.

Lights during printing.

STANDBY/ON

Button

Turns the printer on and off.

IrTran-P

(IrDA receiving window)

Receives image data during

infrared transmission.

Jack cover

DC IN

Connects AC Adapter/Charger

by using a DC cord (provided).

Video input jack

Connects a video cable from

the video output terminal on

camcorder or other unit.

OUT

DC IN

PC connection jack

Video output jack

With the use of optional software, the printer

can be connected to a communications port

on a PC compatible (RS-232C) or Macintosh

(RS-422).

· Outputs input image or print image for view-

ing on a TV or other monitor.

· Connect this output to a video input terminal

on a TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Re a r Vie w

Battery compartment

Open the lid to load or remove batteries.

Paper out/manual feed slot

· Finished prints are ejected from this exit.

· Single sheets of paper are inserted here

during manual feed.

Ink cassette compartment

Open the lid to load or remove ink cassettes.

Bo tto m Vie w

Paper compartment door switch

Slide this switch to open the paper

compartment.

Paper compartment door

Open this door to load paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS, INDICATORS AND CONNECTORS (Continued)

ⅷO p e ra tio n b u tto n s

Use these buttons to perform operations from storing through to printing images, selecting and

setting menu items.

Use the buttons and follow the instructions given on the LCD panel.

MENU MEMORY PRINT

SELECT

SET

ⅷMe m o ry a n d Prin t O p e ra tio n s

See page

Mode overview

· Press to store input video image.

MEMORY

· Press to print stored video image.

ⅷSe le ctin g a n d se ttin g m e n u ite m s

See page

Mode overview

· Turns menus on and off.

· Press once to select a menu.

· Each press of the SELECT button displays a menu item on the

LCD panel.

· Select desired item.

SELECT

· Press the SET button and the Selected mode indicator blinks.

· Each press of the SET button changes the blinking item on the

LCD panel. Select the desired item.

SET

· Press the MENU button after selecting the desired item with

the SET button to confirm the selection.

Download from Www.Somanuals.com. All Manuals Search And Download.

ⅷMe n u Se ttin g List

Desired Action

Menu item

Setting

Set video source

· Print sample

input

video → infrared → PC

sample → frame list

· Superimpose frame list

Superimpose frame

frame Set.

print mode

off → frame 1 → frame 2 → frame 3

frame 4 → frame 5 → frame 6

frame 7 → frame 8 → frame 9

standard → 2 div. → 6 div.

8 div. → calender

Enter print mode

off → sepia → B/W

Add special print effect

effect

Adjust brightness or tint

· Brightness (adjust before

storing the image)

· Tint (adjust after storing

the image)

adj. image

bright.

tint

+1, +2, +3, +4, +5

–1, –2, –3, –4, –5

Suppress blur

memo. mode

man. feed

mirror

motion pic ↔ still pic

off ↔ on

Manual feed print

Print mirror image

Save energy

off ↔ on

save mode

form feed

language

5min. ↔ off

Remove jammed paper

Switch language display

off ↔ on

English → français → Deutsch

Switch monitor display

monitor

input pic. ↔ memo. pic.

• Initial settings are indicated in gray.

The printer returns to these settings when powered up after shutdown.

• Menu items that cannot be selected are not displayed.

• The ”PC" input mode requires the use of special software.

For detailed information, consult your nearest JVC dealer.

• A sample video image is stored in the printer. You can select “sample” to print out this

sample in the “input” menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS (Video Connections)

Prin tin g fro m so u rce w ith vid e o o u tp u t te rm in a ls

VIDEO Source

Connect to video

output terminals

Connect to video

input terminal

(yellow)

Video cable

(Supplied with a video

source or optional)

(yellow)

Video cable 2

(Provided)

Jack cover

(black)

Video cable 1

(Provided)

OUT

DC IN

(black)

(yellow)

Connect to video

IN jack

Connect to video

OUT jack

Notes: • Make sure that the printer is properly connected to the video source. A loose video

cable connection will prevent printing.

• Do not place the printer on its side or on a leaning surface as this may cause paper

jams.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS (IrDA Reception)

Prin tin g fro m a Dig ita l Still Ca m e ra w ith IrTra n -P

This is a standard for transmitting data using infrared

transmission. Equipment that conform to this standard

can transmit to each other regardless of make.

Digital still camera

with IrTran-P

Approx. 15˚

Up to 50 cm

The distance at which

transmission is possible

varies with the equipment

used.

Printer

IrDA receiver

Notes: • IrDA infrared communications allow only two pieces of equipment to communicate.

Transmission from one digital still camera to several printers simultaneously is not

possible. Only the printer that first receives the data can print it.

• Transmission may become unstable or impossible due to external light, the state of

battery depletion and the distance or angle between the equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUPPLYING THE POWER

Ch a rg in g th e b a tte ry

Use the provided AA-V68 AC adapter/Charger for charging the battery. Batteries that have not

been completely depleted can also be charged.

Battery BN-V607

To AC outlet

Power cord

Charge

indicator

AC Adapter/Charger

Power lamp

AA-V68

DC output terminal

Charge indicator 2

(Blinks during charging → Lights continuously when charging completes.)

1 ^C_{• C}^O_o^N_nn^N_ec^E_t^C_th^T_e^A_po^C_w^A_er^D_co^A_rd^PT_to^E_a^R_w^{/ C}_al^H_{l o}^A_u^R_tle^G_t.^ER

2 ^I_•^N_Th^S_e^E_c^R_h^T_arg^T_e^H_i^E_nd^B_ic^A_at^T_o^T_r^E_st^R_a^Y_{rts to blink.}

Place side with

and symbols

face down.

• Charging has completed when the indicator

stops blinking and is on continuously.

3 ^R_{• R}^E_e^M_m^O_ov^V_e^E_the^TH_po^E_w^B_er^A_c^T_o^T_rd^E_.^RY

• Approximate charge time

• Charging not possible

→ Approx. 90 min for each BN-V607 battery

→ Charging is not possible when the DC cord is

connected to the AC adapter.

• Number of prints per battery charge → 40 prints for each BN-V607 battery (at room

temperature)

NOTES:

• If you connect the DC cord to the AC adapter during battery charging, power is supplied to the printer

and charging stops.

• When charging the Battery for the first time or after a long storage period, the Charger Indicator may not

light. In this case, remove the Battery from the AC Power Adapter then try charging again.

• Since the AC Power Adapter processes electricity internally, it becomes warm during use. Be sure to use

it only in well-ventilated areas.

• If the battery operation time remains extremely short even after having been fully charged, the battery is

worn out and needs to be replaced. Please purchase a new one.

Download from Www.Somanuals.com. All Manuals Search And Download.

Lo a d in g th e Ba tte ry

Usin g AC p o w e r

The battery (BN-V607) is not charged when

shipped.

When using the printer indoors, you can use

the AC Adapter instead of a battery.

Charge it using the AC adapter before use.

DC IN

Jack

DC IN

AC outlet

1, 3

DC cord

Power lamp

O PEN THE BATTERY CO MPART-

MEN T LID

• Slide and open the battery compartment

lid in the direction of the arrow.

1 _•^C_C^O_o^N_nn^N_ec^E_t^C_th^T_e^D_D^C_{C c}^C_o^O_rd^R_to^D_{the AC Adapter}

2 _•^IN_N^S_ot^E_e^R_th^T_at^T_t^H_he^E_b^C_at^H_te^A_ry^R_m^G_a^E_y^D_be^B_d^A_am^TT_ag^E_e^R_d^Y_if

then to the printer.

it is inserted

incorrectly.

• Slide in the battery as far as it will go

until it is properly seated.

2 _•^S_C^U_o^P_n^P_ne^L_c^Y_{t t}^A_he^C_p^P_ow^O_e^W_{r c}^E_or^R_{d to an AC outlet.}

CLO SE THE BATTERY CO MPART-

MEN T LID

NOTE:

When using the provided DC cord, make

sure you connect the end of the cable with

the core filter to the camcorder. The core

filter reduces the interference.

Re m o vin g th e Ba tte ry

• Open the battery compartment lid and take

out the battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION OF INK CASSETTE

In sta llin g th e In k ca sse tte

Before printing, load printing paper and ink kit as shown below.

1, 4

O PEN IN G IN K CASSETTE CO M-

PARTMEN T LID

• To open the ink cassette compartment lid,

slide it in the direction of the arrow as far as

it will go.

INK

REMO VIN G SLACK IN THE IN K

RIBBO N , IF AN Y

• Insert a propelling pencil or a ball-point pen

and rotate the roller in the indicated

direction.

3 ^I_•^N_H^S_ol^T_d^A_th^L_e^LI_s^N_id^G_{e w}^I_i^N_th^K_mo^C_d^A_el^S_l^S_ab^E_e^T_l^T_f^E_{ace up and}

slide in the ink cassette as far as it will go.

CLO SE THE IN K CASSETTE CO M-

PARTMEN T LID

W h e n re m o vin g in k ca sse tte

• Grasp the knob at the center of the ink cassette and

pull it towards you.

CAUTION:

Do not touch the inside of the ink cassette

compartment toavoid burns and other injuries.

Download from Www.Somanuals.com. All Manuals Search And Download.

About blank Paper sheet Set (optional)

The following accessories are required in printing with this printer.

SET

CO N TEN TS

USES

PV-C20AU

(Standard type)

Standard paper: 20 sheets

Ink cassette (20 prints)

To print the scene of your choice to

make commemorative shots.

PV-C12SAU

(Sticker type)

Sticker paper: 12 sheets

Ink cassette (12 prints)

Make personalized stickers for

pasting on cards, etc.

PV-C12KAU

(Standard type,

Sticker type)

Standard paper: 6 sheets

Sticker paper: 6 sheets

Ink cassette (12 prints)

Make personalized stickers for

pasting on cards, etc.

Note: Pay attention to the following in handling printing paper and ink cassettes

Before printing

• Do not use printing paper that has been folded or curled to avoid paper jams.

• Do not use wet or humid printing paper as it will not print normally and could cause a paper

jam.

• Do not touch or write on the print surface.

• Do not touch or pull out the ink sheets in the ink cassette.

• Make sure that children do not lick or ingest the ink sheets.

• Used ink cassettes should be replaced with new cartridges.

Old cartridges cannot be reused. Do not attempt to reuse the cartridge by rewinding the

rollers.

• Printing paper and ink cassettes must not be stored in a location exposed to high

temperatures, high humidity or directsunlight.

• Read the instructions accompanying the printing paper and ink cassette and use them

accordingly.

After printing

• The printer applies a coating to make the prints glossy.

• The prints should be handled with care since they are coated with a soft material that can

easily be damaged by sharp objects such as a fingernail or the like.

• The colors will fade if the paper is exposed to volatile solvents (alcohol, toluene, ketone,

etc.).

• Do not paste adhesive tape on the print surface. The image will be damaged when the tape

is removed.

Care in storing prints

• Printed paper must not be stored in a location exposed to high temperatures, high humidity

or direct sunlight.

• Store printing paper horizontally in the box. If stored vertically, the paper might curl and

cause paper jams.

Download from Www.Somanuals.com. All Manuals Search And Download.

LOADING THE BLANK PAPER

Lo a d in g Bla n k Pa p e r

To print, load Blank paper sheet set.

1, 3

Printing surface

(white side)

O PEN PAPER CO MPARTMEN T

DO O R

• Slide the paper compartment door switch in

the direction of the arrow to open the paper

compartment door.

2 _•^LO_Rif^A_fle^D_th^B_ro^L_u^A_g^N_{h t}^K_he^P_p^A_ap^P_e^E_r^R_{so that each sheet is}

separated from the next and place it with the

printing surface (white side) facing inside.

• Make sure that the paper does not rise above

tab A .

Notes:

CLO SE THE PAPER CO MPARTMEN T

DO O R

• Make sure that the paper has been correctly

loaded.

· Make sure that the paper does not

rise above tab A .

· Place the side with the text face up.

· Number of sheets: max. 15 sheets

• The door clicks into place when the door is

properly closed.

Notes: • Read the instructions on the printing paper and ink kit, and the “Caution on Loading

Printing Paper” on the inside of the printing paper compartment.

• Loading printing paper

Since the paper cannot be properly fed if each sheet sticks together, riffle through the

paper before loading it and make sure that the paper ends are aligned.

If the message, “Load paper” is displayed when there is paper in the paper

compartment, reload the paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

ⅷ Before printing, make sure everything is set up and ready.

1 . Co n n e ct th e p rin te r to th e vid e o so u rce to b e

p rin te d fro m . (੬pg. 14).

• To use IrTran-P, transmit the images after turning on the power as described in step 5.

2 . Ha ve a Bla n k Pa p e r Sh e e t Se t re a d y (੬pg. 19).

3 . In sta ll th e in k ca sse tte in th e p rin te r (੬pg. 18).

4 . O p e n th e p a p e r co m p a rtm e n t d o o r a n d p la ce th e

p rin tin g p a p e r (੬pg. 20).

• Use the printing paper in the same box as the ink cassette.

5 . Tu rn o n th e p o w e r. (੬pg. 10).

• Insert the power plug of the AC adapter in a wall outlet.

• The printer can also be battery powered.

• Turn on the printer.

6 . Se le ct La n g u a g e d isp la y e d o n th e LCD p a n e l

You can select desired one of the following display languages: English, French and German.

• Select the Language menu and choose the desired language (੬pg. 13).

1. Press the MENU button.

2. Press the SELECT button repeatedly until “language” appears on the LCD panel.

3. Press the SET button until desired language appears.

4. Press the MENU button twice.

Notes:

• The above completes all printer preparations.

• Please read the instructions on pages 22 to 39 before printing.

Download from Www.Somanuals.com. All Manuals Search And Download.

PRINTING FROM VIDEO SOURCE WITH VIDEO TERMINALS

This is the standard method for printing from a video source with video terminals. It allows you to

easily connect your Camcorder, VCR or other video source with video terminals to the printer.

6 7

LCD panel

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 ^P_{• T}^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_sp^E_la^N_ys^U_the^B_p^U_r^T_in^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 ^P_{• P}^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^BU_rep^T_e^T_a^O_te^N_{dly until}

i n p u t

SELECT

v i d e o

“input” appears.

Note:

When “video” is already displayed on the

LCD panel, press the MENU button and skip

steps 3 and 4.

SET

i n p u t

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

V i d e o

panel starts to flash.

• Press the SET button until “video” appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the instruction manual

supplied with the video source.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored. The message, “Store in memory” is

displayed when the image has been stored.

MENU MEMORY PRINT

SELECT

SET

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

7 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

MENU MEMORY PRINT

SELECT

SET

• The message, “Please wait ...” is displayed

on the LCD.

Then the printer icon

appears.

• The printer icon

indicates the

following conditions.

on: image data is being printed

off: printing has been completed

• When printing is completed, the message,

“Remove paper” is displayed on the LCD

panel.

Do not touch the printer or printing paper

until this message is displayed.

NOTES:

• To print the same image again, press the PRINT button. One print is made each time the

PRINT button is pressed.

• To print a different image, perform operations in steps 5 to 7.

• To store the picture again before printing, switch menu item “monitor” from “memo. pic” to

“input pic.”

• Do not touch the printer or the paper during printing

During printing paper will come out of the paper out/manual feed slot; do not touch the

paper until printing stops to prevent paper jams.

Do not open the paper compartment door or the ink cassette compartment lid during

printing. When the printer is battery powered, do not open the battery compartment door. If

opened, printing stops and the power is automatically turned off. When the printer is

powered up again, the paper that was being printed when printing stopped is ejected.

Download from Www.Somanuals.com. All Manuals Search And Download.

PRINTING FROM IrTran-P EQUIPPED DIGITAL STILL CAMERA

The printer can receive and print images from an IrTran-P equipped digital still camera. Since no

cables are required, this printing method is ideal at wedding receptions, parties or the like.

7 8

MENU MEMORY PRINT

SELECT

SET

IrDA receiving window

1, 4 2 3

Preparations

• Make the connections (੬pg. 15).

• Place the digital still camera and printer within a 50 cm distance of each other. Image transmission

can be performed within a 15° angle of the printer receiving window.

• Read the instructions in the instruction manual supplied with the IrTran-P equipped digital still

camera.

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

i n p u t

SELECT

v i d e o

“input” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

i n p u t

i n f r a r e d

panel starts to blink.

• Press the SET button until “infrared” appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Still Camera Operations

SELECT THE DIGITAL STILL CAMERA

IMAGE YO U W ISH TO PRIN T

• For details, refer to the instruction manual

supplied with the camera.

TRAN SFER THE CAMERA IMAGE TO

THE PRIN TER

• Orient the infrared sending window on the

digital still camera so that it faces the IrTran-P

receiving window on the printer.

• Make sure that there are no objects between

the printer and the camera.

Note:

Transmission may become unstable or

impossible due to external light, the

state of battery depletion and the

distance or angle between the

equipment.

• Transmit the data from the camera to the

printer.

Print Operations

THE PRIN TER STARTS RECEIVIN G

THE IMAGE

• The image you wish to print is now being

stored.

MENU MEMORY PRINT

SELECT

SET

• While the image data is being stored, the

message, “infrared receiving” is displayed on

the LCD panel.

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

8 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

• The message, “Please wait ...” is displayed

on the LCD panel.

NOTES:

Then the printer icon

• The printer icon

following conditions.

on: image data is being printed

off: printing has been completed

appears.

indicates the

• To print the same image again, press

the PRINT button. One print is made

each time the PRINT button is

pressed.

• To print a different image, perform

operations in steps 5 to 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS

Su p e rim p o sin g th e Fra m e o f Ch o ice o n th e Im a g e – Fra m e Prin tin g –

• You can print a frame around an image.

• Select one frame you wish to use out of the nine available frames. You can use sticker paper to

print titles for greeting cards and so on.

6 7

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

f r a m e s e t

SELECT

o f

“frame set.” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

panel starts to blinking.

f r a m e s e t

f r a m e

• Press the SET button until the desired frame

number appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the instruction manual

supplied with the video source.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored.

MENU MEMORY PRINT

SELECT

SET

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

7 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

MENU MEMORY PRINT

• The message, “Please wait ...” is displayed

on the LCD panel.

SELECT

SET

Then the printer icon

• The printer icon

appears.

indicates the

following conditions.

on: image data is being printed

off: printing has been completed

NOTES:

• To print the same image again, press the PRINT

button. One print is made each time the PRINT

button is pressed.

• To print a different image, perform operations in

steps 5 to 7.

• The frame cannot be changed after printing.

• When the “input” menu item is displayed (see

page 13), you can select “frame list” and print

all 9 frames. This makes it easier to select a

frame.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS (Cont.)

Prin tin g Mu ltip le Im a g e s o n th e Sa m e Pa p e r – MULTI Prin t –

You can print 2, 6 or up to 8 images on a single paper.

This makes it easy to customize printing to suit the application.

You can use sticker paper to print titles for season's greetings and so on.

6 7

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

p r i n t

o d e

SELECT

s t a n d a r d

“print mode” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

panel starts to blink.

p r i n t m o d e

• Press the SET button until the desired number

d i v

of images appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the instruction manual

supplied with the video source.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The image stored in memory is displayed in

the selected number of multiple images.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored.

MENU MEMORY PRINT

SELECT

SET

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

MENU MEMORY PRINT

7 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

SELECT

SET

• The message, “Please wait ...” is displayed

on the LCD panel. Then the printer icon

appears.

• The printer icon

indicates the

following conditions.

on: image data is being printed

off: printing has been completed

NOTES:

• To print the same image again, press the

PRINT button. One print is made each time

the PRINT button is pressed.

• To print a different image, perform operations

in steps 5 to 7.

• The multipix setting cannot be changed after

printing.

• On a TV screen, multipix images are displayed

horizontally across the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS (Cont.)

Co m b in in g Im a g e a n d Ca le n d a r – Ca le n d a r Prin tin g –

You can turn your favorite picture into a calendar.

6 7

MENU MEMORY PRINT

SELECT

SET

1 2

1 9 9 8

SUN MON TUE WED THU FRI SAT

1 0 1 1 1 2

1 3 1 4 1 5 1 6 1 7 1 8 1 9

2 0 2 1 2 2 2 3 2 4 2 5 2 6

2 7 2 8 2 9 3 0 3 1

1,4 2,3 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

p r i n t m o d e

SELECT

s t a n d a r d

“print mode” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

p r i n t m o d e

c a l e n d a r

panel starts to blink.

• Press the SET button until the “calendar”

appears on the LCD panel.

• Do as follows to change calendar years and

months.

y e a r

1 9 9 8

J a n

· Press the SELECT button when “calendar”

blinks.

m o n t h

· Press the SET button repeatedly until the

desired year appears on the LCD panel. Years

between 1998 and 2007 can be selected.

· Press the SELECT button.

· Press the SET button repeatedly until the

desired month appears on the LCD panel.

· Press the MENU button to confirm the entry.

y e a r

1 9 9 8

D e c

m o n t h

Download from Www.Somanuals.com. All Manuals Search And Download.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

• When entering the year and month in step 3,

press the MENU button only once.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the supplied instruction

manual.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored.

MENU MEMORY PRINT

• The memory icon

indicates the

SELECT

SET

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

7 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

MENU MEMORY PRINT

• he message, “Please wait ...” is displayed on

the LCD panel.

SELECT

SET

Then the printer icon

• The printer icon

appears.

indicates the

following conditions.

on: image data is being printed

off: printing has been completed

NOTES:

• To print the same image again, press the PRINT button. One print is made each time the PRINT

button is pressed.

• To print a different image, perform operations in steps 5 to 7.

• On a TV screen, the images are displayed horizontally across the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS (Cont.)

Prin tin g Usin g Sp e cia l Effe cts – Sp e cia l Effe cts –

You can print an image in “sepia” or “black and white”.

6 7

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

e f f e c t

SELECT

o f

“effect” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

e f f e c t

s e p i a

panel starts to blink.

• Press the SET button repeatedly until “sepia”

or “B/W” appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Notes:

• When “sepia” is selected, the image is printed

in sepia-tinted (reddish-brown) monochrome

like an old faded photograph.

• When “B/W” is selected, the image is printed

in black and white.

• The special effect appears only in the printed

image, while the image on the monitor is

displayed in color.

Download from Www.Somanuals.com. All Manuals Search And Download.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the instruction manual

supplied with the video source.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored.

MENU MEMORY PRINT

SELECT

SET

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

7 _•^P_T^R_h^E_e^S_p^S_rin^T_t^H_er^E_sta^P_r^R_ts^I_p^N_ri^T_nti^B_n^U_{g t}^T_h^T_e^O_st^N_{ored image.}

MENU MEMORY PRINT

• The message, “Please wait ...” is displayed

on the LCD panel. Then the printer icon

appears.

SELECT

SET

• The printer icon

indicates the

following conditions.

on: image data is being printed

off: printing has been completed

• The image is printed using the selected

special effect.

NOTES:

• To print the same image again, press the

PRINT button. One print is made each time

the PRINT button is pressed.

• To print a different image, perform operations

in steps 5 to 7.

• The settings cannot be changed when printing

is completed. To change settings, store an

image into a memory again.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS (Cont.)

Ma n u a l Fe e d

This function allows you to print one page at a time using manual feed.

6 8

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparation

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

m a n .

f e e d

SELECT

o f

“man. feed” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

m a n .

f e e d

panel starts to blink.

o n

• Press the SET button until “on” appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

Print Operations

SET THE VIDEO SO URCE TO PLAY-

BACK MO DE

• For details, refer to the instruction manual

supplied with the video source.

PRESS THE MEMO RY BUTTO N

W HEN THE IMAGE YO U W ISH TO

PRIN T APPEARS

• This action stores the image you wish to print.

• The message, “Please wait ...” is displayed

on the LCD panel while the image is being

stored.

MENU MEMORY PRINT

SELECT

SET

• The memory icon

indicates the

following conditions.

on: image data has been stored in the printer

off: no image data is stored in the printer

IN SERT PRIN TIN G PAPER IN PAPER

O UT/ MAN UAL FEED SLO T

• Slide in the printing paper with the printing

surface up as far as it will go without curling it.

• Unless the printing paper is inserted straight,

it will cause a paper jam.

Paper

8 _•^P_G^R_e^E_n^S_tl^S_{y p}^T_r^H_es^E_{s t}^P_h^R_e^I_e^N_dg^T_e^B_of^U_th^T_e^T_p^O_ri^N_{nting paper}

MENU MEMORY PRINT

into the printer.

• Release the paper when it is pulled into the

SELECT

SET

printer.

• The printer starts printing the stored image.

• The message, “Please wait ...” is displayed

on the LCD panel. Then the printer icon

appears.

• The printer icon

conditions.

indicates the following

on: image data is being printed

off: printing has been completed

NOTES:

• You can add a frame, produce multipix prints

or add special effects.

• To print the same image again, press the

PRINT button. One print is made each time

the PRINT button is pressed.

• To print a different image, perform operations

in steps 5 to 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

MISCELLANEOUS PRINTING OPERATIONS (Cont.)

Prin tin g Re ve rse d Im a g e s – Mirro r Im a g e s –

You can, if you wish, reverse a printed image.

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

m i r r o r

SELECT

o f

“mirror” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

m i r r o r

panel starts to blink.

o n

• Press the SET button until “on” appears.

NOTE:

Only the printed image will be reversed, a

monitor connected to the printer will

display the normal image.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Print Operations

• Observe the instructions on pages 22 to 35 to

print the image.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTMENTS

Ad ju stin g Im a g e Q u a lity – Ad ju stm e n ts b e fo re Prin tin g –

When “video” is set in the menu item “input”, you can adjust the brightness and tint before

printing.

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

Selecting Menu Item

• Make the connections (੬pg. 14).

• Select “video” in the “input” menu

(੬pg. 22).

• The brightness of the image can be adjusted only

before storing it.

• The tint of the image can be adjusted only after

storing it.

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^L_b^E_u^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

a d j

i m a g e

SELECT

b r i g h t

“adj. image” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

panel starts to blink.

• Adjusting image brightness

a d j

i m a g e

b r i g h t

· Press the SELECT button until “bright.” appears.

· Press the SET button repeatedly to select the

desired brightness.

To increase brightness, select 0, +1, +2, +3, +4 or

+5. The higher numbers indicate greater

brightness. To decrease brightness, select 0, -1, -2,

-3, -4 or -5. The higher numbers indicate lower

brightness.

a d j

i m a g e

+ 1

b r i g h t

a d j

i m a g e

+ 1

i n t

• Adjusting image tint

· Press the SELECT button until “tint” appears.

· Press the SET button repeatedly to select the

desired tint. To increase saturation, select 0, +1,

+2, +3, +4 or +5. The higher numbers indicate

greater saturation. To decrease saturation, select 0,

-1, -2, -3, -4 or -5. The higher numbers indicate

lower saturation.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FIRM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTMENTS (Cont.)

Sa vin g En e rg y – Sa ve Mo d e –

• The printer is equipped with a power saving feature to reduce battery power consumption.

• When the printer is turned on and not used for 5 minutes, the save mode automatically turns it

off.

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

s a v e m o d e

SELECT

o f

“save mode” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

s a v e m o d e

5 m i n .

panel starts to blink.

• Press the SET button until “5 min.” appears.

PRESS THE MEN U BUTTO N TW ICE

TO CO N FRIM THE EN TRY

• When “5 min” is selected, the printer will

automatically be turned off if it is left idle for 5

minutes.

• When “off” is selected, the printer will be on

continuously.

Notes:

• When the printer is turned off, it will

automatically be reset to the “5 min” setting.

• “save mode” cannot be selected when “PC” is

selected in the “input” menu item (see page 13).

Download from Www.Somanuals.com. All Manuals Search And Download.

Sw itch in g b e tw e e n Mo tio n Pictu re a n d Still Pictu re – Me m o ry Mo d e Se le ctio n –

• When “video” is set in the menu item “input”, you can select between motion picture or still

picture.

• The motion picture setting has a feature for suppressing blur and thus lends itself to capturing

images from camcorder or VCRs.

• The still picture setting turns off the blur suppressing function and is therefore best suited to

storing still images from digital still cameras and so on.

MENU MEMORY PRINT

SELECT

SET

1, 4 2 3

Preparations

• Make the connections (੬pg. 14).

Selecting Menu Item

1 _•^P_T^R_h^E_is^S_a^S_ct^T_io^H_n^E_di^M_spl^E_a^N_ys^U_the^B_p^U_ri^T_n^T_te^O_r^N_{menu on the}

LCD panel.

MEMORY

2 _•^P_P^R_r^E_es^S_s^S_th^T_e^H_SE^E_LE^S_C^E_T^LE_bu^C_t^T_ton^B_r^U_ep^T_e^T_a^O_te^N_{dly until}

m e m o . m o d e

SELECT

m o t i o n p i c

“memo. mode” appears.

3 _•^P_T^R_h^E_e^S_i^S_tem^TH_on^E_t^S_he^ET_sec^B_o^U_nd^TT_li^O_ne^N_{of the LCD}

SET

m e m o . m o d e

m o t i o n p i c

panel starts to blink.

• Press the SET button until “motion pic”

appears.

m e m o . m o d e

m o t i o n p i c

NOTE:

The camera

icon is displayed in the still

picture mode.

m e m o . m o d e

s t

p i c

PRESS THE MEN U BUTTO N TW ICE

TO CO N FRIM THE EN TRY

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Me a n in g o f Me ssa g e s Disp la y e d o n th e LCD p a n e l

● Ap p e a rs w h e n :

Ⅲ Actio n :

Me ssa g e

p a g e

P l e a s e

w a i t . . .

●Image data is being stored or printing has started.

–

C o n n e c t

v i d e o i n

●The video source and the printer are not connected or the cable

has been disconnected.

ⅢConnect the video cable according to the instructions on page

14.

N o v i d e o

s i g n a l

●An attempt is made to store an image from a video source that

has been turned off.

ⅢTurn on the video source.

–

M e m o r i s e

i m a g e

●An attempt is made to print before an image has been stored.

ⅢStore image data before printing.

C h a r g e

b a t t e r y

●The battery is depleted.

ⅢLoad a charged battery (BN-V607).

16–17

I n s e r t i n k

c a s s e t t e

●An ink cassette has not been loaded or not been properly

loaded.

ⅢLoad ink cassette and close the lid.

C l o s e

c a s s . d o o r

●The ink cassette compartment lid is open.

ⅢClose ink cassette compartment lid.

C h a n g e i n k ●The ink cassette is depleted.

c a s s e t t e

ⅢLoad new ink cassette.

I n s e r t

p a p e r

●No printing paper is loaded.

ⅢLoad printing paper properly and close the paper compartment

door.

C l o s e

●The paper compartment door is open.

p a p e r d o o r ⅢLoad printing paper properly and close the paper compartment

door.

P a p e r

j a m m e d

●A paper jam occurs during printing.

ⅢClear paper jam according to instructions on page 42.

Re m o v e

p a p e r

●A paper jam occurs during printing.

ⅢClear paper jam according to instructions on page 42.

P r i n t i s

i m p o s s i b l e

●Printing is attempted at low temperature (0°C or colder).

●Abnormal image data has been stored.

ⅢUse the printer under specified conditions.

Download from Www.Somanuals.com. All Manuals Search And Download.

O THER PRO BLEMS:

This printer contains microprocessors. External electronic noise or interference could cause

malfunctioning. In such a case, switch the power off. Then turn on the power and check again.

Ch e ck to se e if

Pa g e

No power is applied to

the printer.

●Has the battery been properly charged?

●Has the power supply been correctly connected?

The error icon

is lit

●Is a message displayed on the LCD panel?

If a message is displayed, follow instructions on page 40.

If not, turn off the printer and wait. Then turn on the

power again.

(or blinks) on the LCD

panel

Paper jam

●A paper jam may be caused by the following factors.

· Paper was not inserted straight during manual feed.

· The printer was placed on its side or on a leaning

surface.

●Remove a jammed paper according to instructions on

page 42.

The video source image ●Is the video cable correctly connected?

you wish to print is not ●Is the TV input selector set to “Video (external input)”?

displayed on the TV.

●The input terminal has priority.

The TV is showing a still ●Is the TV showing the stored image (memory image)?

–

image.

Set the “monitor” menu to “input pic”.

The stored image

disappeared.

●The stored image is deleted when the power is turned

off. Store the image again.

The color appears

faded.

●The color may differ somewhat from the image displayed

on the TV. This is not due to any defect of the printer.

–

The color differs from

set image

The image quality

cannot be adjusted

●Image adjustment is not possible when the menu input

mode is something other than video.

–

The printed image is not ●The printed image is not clean when dirt or dust adheres

clean.

to the printing paper. Dirt and dust can also cause

equipment breakdown.

Stripes on the printed

surface

●Due to the reflection of light, stripes may appear on the

printed surface. This is normal and is not a cause for

concern.

–

The printed image may ●The tint and brightness of the printed image may differ

differ from the TV

image.

from the image as it is displayed on the TV connected to

the printer. This is normal and not a failure.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING (cont.)

W HEN PAPER JAMS

TURN O FF THE PO W ER AN D TURN

IT BACK O N AGAIN

• The jammed paper is ejected from the PAPER

OUT/MANUAL FEED slot.

Paper

When paper jam is not removed using procedure 1.

MENU MEMORY PRINT

SELECT

SET

2, 5 3 4

PRESS THE MEN U BUTTO N

• This action displays the printer menu on the

LCD panel.

MEMORY

SELECT

PRESS THE SELECT BUTTO N

• Press the SELECT button repeatedly until

“form feed” appears.

f o r m f e e d

o f

PRESS THE SET BUTTO N

• The item on the second line of the LCD

panel starts to blink.

• Press the SET button repeatedly until “on”

appears.

SET

f o r m f e e d

o n

PRESS THE MEN U BUTTO N

• The jammed paper is ejected from the PAPER

OUT/MANUAL FEED slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Power supply

DC 6 V} (with AC adapter)

DC 7.2 V} (with lithium-ion battery)

Power consumption

Print format

Print area

11 W

Dye sublimation

70 mm x 52 mm (area depends on print format)

86 x 54 mm

Paper size

Print quality

Resolution

598 (horiz.) dots x 448 (vert.) dots

217 dpi

Print speed

Approx. 70 sec (excluding data transfer and processing)

(processing time)

Connectors

· IrDA input: infrared receiver (one on front panel)

(conforms to IrDA Ver. 1.0 IrTran-P)

· Video input : 3.5 mm in diam. (one on front panel)

· Video output : 3.5 mm in diam. (one on front panel)

· PC input

: 2.5 mm in diam. (one on front panel)

Operating temperature

Relative humidity

Storage temperature

Dimensions

+5 – +35°C

35 – 80 %

-20 – +60°C

130 (W) x 36.5 (H) x 94.5 (D) mm

Weight

345 g . (printer excluding battery and blank paper sheet set)

AC Adapter/Charger

• Power requirement : AC 110 – 240 V `, 50/60 Hz

• Power cosumption : 20 W

• Output

: DC 7.2 V}, 0.77 A (CHARGE)

DC 6.3 V}, 1.8 A (VTR)

• Dimenusions

• Weight

: 94 (W) x 35 (H) x 122 (D) mm

: AA-V68EG : Approx. 300 g

AA-V68EK : Approx. 360 g

E. & O. E. design and specifications subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Battery compartment lid ............................ 17

Operation buttons ..................................... 12

Calendar print ........................................... 30

Charging the battery .................................. 16

Connections ....................................... 14, 15

Paper compartment door switch ......... 11, 20

PC connection jack ................................... 10

PRINT button ............................................ 12

Printing from digital still camera ................ 24

Printing with special effects ....................... 32

Depleting the battery................................... 4

DC input jack............................................ 10

Save mode ................................................ 38

SELECT button ........................................... 12

SET button ................................................. 12

Switching between motion picture

Frame print ............................................... 26

and still image ......................................... 39

STANDBY/ON

button ......................... 10

Icon .......................................................... 10

Image adjustment ...................................... 37

Ink cassette compartment lid ..................... 18

IrTran-P (IrDA) .................................... 10, 24

Video input jack ................................. 10, 14

Video output jack ............................... 10, 14

Jack cover ................................................. 10

LCD panel................................................. 10

Manual feed slot .................................. 11,35

MEMORY button ....................................... 12

MENU button ............................................ 12

Menu item list ........................................... 13

Mirror print ............................................... 36

Multipix .................................................... 28

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

....................................................................................................................................................

Download from Www.Somanuals.com. All Manuals Search And Download.

VICTOR COMPANY OF JAPAN, LIMITED

⁰^P³^ri⁹ⁿ⁸^te^M^d^Nⁱⁿ^V*^Ja^S^p^W^an*^VP

E/EK

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer Dryer IWDE 7145 S User Manual
Intel Computer Hardware IB940 User Manual
Intel Network Router IXP1200 User Manual
Jasco Universal Remote RM24977 User Manual
Jonsered Lawn Mower LT2218A User Manual
JVC Projection Television HD 52G586 User Manual
JVC VCR HR J259EE User Manual
Keating Of Chicago Fryer 18 TS Gas User Manual
Kenwood Stereo Amplifier KAC 5202 User Manual
KitchenAid Clothes Dryer KEYE870B User Manual