ENGLISH
The default setting of On-Screen Display language for this recorder
is ENGLISH.
CONTENTS
SAFETY FIRST
2
Safety Precautions ...................... 2
VIDEO CASSETTE RECORDER
INSTALLING YOUR NEW RECORDER 3
Basic Connections ..................... 3
INITIAL SETTINGS
4
Video Channel Set ..................... 4
Auto Set Up ............................... 6
Select Language ......................... 8
Clock Set ................................... 9
On-Screen Displays ................. 10
HR-J459EE
HR-J259EE
INFORMATION ON COLOUR
SYSTEM
11
Colour System Set .....................11
PLAYBACK
12
Basic Playback ......................... 12
Playback Features .................... 13
RECORDING
16
Basic Recording ....................... 16
Recording Features .................. 17
B.E.S.T. Picture System ............. 18
VCR
TV
TV/VCR
AUDIO
DISPLAY
(MONITOR)
TIMER RECORDING
20
1
4
2
3
2
5
6
DAILY
WEEKLY
SHOWVIEW Setup........................ 20
SHOWVIEW Timer Programming ... 22
Express Timer Programming ..... 24
Automatic Satellite
7
C. RESET
8
9
AUX
CANCEL
TIMER
4
0
START
STOP
DATE
TV
PROG
EXPRESS PROGRAMMING
PROG.
CHECK
30 SEC
1
PROG.
Programme Recording ............. 28
R
STANDBY/ON
DISPLAY
PUSH JOG
V
T
SP/LP
SPECIAL FEATURES
TV Multi-Brand Remote
29
R
VIDEO
AUDIO
REVIEW
REC LINK
TV PROG
SP
VPS/PDC
MULTI BRAND
REMOTE CONTROL UNIT
Control .................................... 29
The recorder illustrations appearing in this instruction
manual are of the HR-J459EE.
EDITING
30
Edit To Another Video
Recorder .................................. 30
Edit From A Camcorder Or
Another Video Recorder........... 31
PAL
TUNER SET
32
39
40
43
46
QUESTIONS AND ANSWERS
TROUBLESHOOTING
INDEX
INSTRUCTIONS
SPECIFICATIONS
EN
LPT0115-001B
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR NEW RECORDER
EN
3
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-
FORMED.
Basic
CHECK CONTENTS
listed in “Specifications” (੬ pg. 46).
Connections
Make sure the package contains all of the accessories
1
2
Aerial terminal
SITUATE RECORDER
RF Cable (provided)
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
The connection method you use depends on the type
of TV you have.
Back of TV
TV
Aerial
Cable
3
AV-IN terminals
AV Cable
RF CONNECTION
● To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
(not provided)
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and
the TV’s aerial terminal.
AV CONNECTION
Mains Power
Cord
● To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional AV cable between the
AUDIO OUT and VIDEO OUT connectors on the
rear panel of the recorder and the TV’s AV-IN
terminals .
CONNECT RECORDER TO
MAINS
Plug the end of the mains power cord into a mains
outlet.
Rear View
4
Mains outlet
AUDIO OUT/
VIDEO OUT
ATTENTION
If you have finished all the necessary connections, go to
"Video Channel Set" on page 4, then perform Auto Set Up on
page 6; do NOT press the
button on the recorder/remote
control to turn on the recorder's power before you start Auto
Set Up.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
4
EN
If you have connected the video recorder to your TV
via the provided RF cable only (RF connection) – Go to
"With RF Connection" below.
Video
If you have connected the video recorder to your TV
via both the provided RF cable and an AV cable (AV
connection) – Go to "With AV Connection" on next
page.
Channel Set
Video Channel (RF Output Channel) is the channel on
which your TV receives picture and sound signals from the
video recorder through the RF cable.
With RF Connection
IMPORTANT:
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHANNEL
SET MODE
Hold down STOP/EJECT on the recorder until the
display panel shows the following.
1
SELECT TV SYSTEM
Press TV PROG + or – to set appropriate TV system that
matches the system of TV being used (refer to the table
below).
2
1
4
7
2
5
8
3
6
9
2
1 : B/G 2 : D/K
Major Countries
TV System
4
0
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland,
Sweden, Germany, Egypt
B/G
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland,
Russia
1
D/K
OK
TEST SIGNAL
The channel on which the screen to
the left appear clearly in step 3 is
your Video Channel.
To view picture signals from the video recorder, set
your TV to the Video Channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
With AV Connection
SET VIDEO CHANNEL
Set your TV to UHF channel 36.
IMPORTANT:
● If the two vertical white bars appear clearly on the
screen as shown in the illustration (੬ "TEST SIGNAL"
on page 4), press OK and then go to step 4.
● If the two vertical white bars do not appear clearly,
press OK and then TV PROG + or – to set the video
recorder to a vacant channel between 28 and 60
which is not occupied by any local station in your
area.
3
4
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHANNEL
SET MODE
(Ex.) If channel 50 is available in your area
Hold down STOP/EJECT on the recorder until the
display panel shows the following.
1
2
Then set your TV to UHF channel 50 and check if the
two vertical white bars appear clearly on the screen; if
so, go to step 4. If not, re-set the video recorder to
another vacant channel and try again.
SET VIDEO CHANNEL
shows the following.
Press OK, then press TV PROG – until the display panel
NOTES:
● If you set the video recorder to a channel which is
occupied by a local station or has neighbouring
channels that are occupied by local stations, the
picture reception quality will be affected and some
interference noise will appear on the TV screen. Be
sure to select a vacant channel which has no
broadcast on neighbouring channels.
Now the video channel is set to off (– –).
EXIT VIDEO CHANNEL SET
MODE
● If you cannot obtain the two vertical white bars
clearly with any channel between 28 and 60, consult
your JVC dealer.
Press
to finish the setting.
EXIT VIDEO CHANNEL SET
MODE
3
To view picture signals from the video recorder, set
your TV to its AV mode.
Press
to finish the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
6
EN
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
button is first pressed to power on the recorder
after you plug the mains power cord into a mains outlet.
when the
Auto Set Up
Auto Channel Set
IMPORTANT
Before starting, make sure of the following:
● Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
● The TV aerial cable should be connected to the recorder.
● The recorder's mains power cord should be connected to
a mains outlet. ੬ pg. 3
● If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
● The "Video Channel Set" procedure should be done first and
the TV should be set to its AV mode (with AV connection ੬
pg. 5) or video channel (with RF connection ੬ pg. 4).
– To change the selected language ੬ pg. 8
– To reset or adjust the time ੬ pg. 9
– To add/delete channels manually ੬ pg. 34 – 35
– To reset the tuner after moving to a different location
੬ pg. 32
PERFORM AUTO SET UP
Press
.
● The Language Select screen appears.
1
2
SELECT LANGUAGE
Press PUSH JOG %fi to place the pointer next to your
desired language (English or Russian), then press OK or
PUSH JOG
.
● The Clock Set screen appears.
1
4
7
2
5
8
3
6
9
2
SET TIME
Press PUSH JOG %fi to
CLOCK SET
set the time, then press OK
TIME
0: 00
DATE
YEAR
98
3
or PUSH JOG
.
01 . 01
4
0
● Press and hold either
button to delay or
advance the time by 30
minutes.
[5 ] =
∞
[MENU] : EXIT
1
SET DATE
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG
.
OK
4
5
● Press and hold either button to change the date by 15
days.
PUSH JOG
SET YEAR
Press PUSH JOG %fi to set the year, then press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
START AUTO CHANNEL SET
Press MENU and the
"AUTO SET" screen
AUTO SET
6
appears. When Auto
Channel Set is completed,
"SCAN COMPLETED"
appears for about 5
seconds on the screen,
then the normal screen
appears.
PLEASE WAIT
+
+
+
0
[MENU] : EXIT
● The Auto Set Up function scans all the channels that
are receivable by your recorder. It then automatically
assigns each receivable channels to the TV PROG
buttons. It skips non-receivable channels.
● As Auto Set Up progresses, the " " mark on the
screen moves from left to right.
ATTENTION
1
4
7
2
5
8
3
6
9
Since the product is designed for use in regions where the
D/K TV system is used, Auto Set Up will not work properly
in regions where the B/G TV system is used (੬ pg. 34).
Please set the tuner manually (੬ pg. 34).
2
4
0
NOTES:
TV PROG
● If you perform Auto Set Up when the aerial cable is not
connected properly, "SCAN COMPLETED -NO SIGNAL-"
appears on the screen. When this happens, make sure of the
aerial connection and press OK; Auto Channel Set will take
place again.
1
● If there is a power cut, or if you press
or MENU while
Auto Set Up is in progress, Auto Channel Set will be inter-
rupted; be sure to turn off the recorder power once and try
again.
● If you want to set the tuner manually such as to add or skip
channels, to swap channel positions, or to fine-tune channels,
੬ pg. 34 – 35.
OK
MENU
● If no sound accompanies the picture on some channels that
have been stored by Auto Set Up, the TV system setting for
those channels may be incorrect. Select the appropriate TV
system for those channels. ੬ "TV System Selection – When
you see the picture but hear no audio" on page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
8
EN
TURN ON THE RECORDER
Press
.
Select
1
2
3
Language
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS MAIN MENU
SCREEN
Press MENU.
ACCESS INITIAL SET
SCREEN
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
MODE SET
"INITIAL SET", then press
AUTO CH SET
MANUAL CH SET
INITIAL SET
1
4
7
2
5
8
3
6
9
OK or PUSH JOG
.
2
5
[
∞] =
[MENU] : EXIT
4
0
ACCESS LANGUAGE
SELECT SCREEN
1
Press PUSH JOG %fi to
INITIAL SET
place the pointer next to
"LANGUAGE", then press
CLOCK SET
4
LANGUAGE
OK or PUSH JOG
.
GUIDE PROG SET
OK
MENU
5
[
∞] =
[MENU] : EXIT
PUSH JOG
SELECT LANGUAGE
Place the pointer next to the language of your choice
(English or Russian) by pressing PUSH JOG %fi, then
5
6
press OK or PUSH JOG
.
RETURN TO NORMAL
SCREEN
Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
TURN THE RECORDER ON
Press
.
Clock Set
1
2
3
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS MAIN MENU
SCREEN
Press MENU.
ACCESS INITIAL SET
SCREEN
1
4
7
2
5
8
3
6
9
2
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
MODE SET
"INITIAL SET", then press
AUTO CH SET
MANUAL CH SET
INITIAL SET
OK or PUSH JOG
.
4
0
5
[
∞] =
[MENU] : EXIT
1
ACCESS CLOCK SET
SCREEN
Press PUSH JOG %fi to place the pointer next to
"CLOCK SET", then press OK or PUSH JOG . The
Clock Set screen appears.
OK
4
MENU
INITIAL SET
CLOCK SET
CLOCK SET
PUSH JOG
LANGUAGE
TIME
0: 00
DATE
YEAR
98
GUIDE PROG SET
01 . 01
5
5
[
/∞] =
[
∞] =
[MENU] : EXIT
[MENU] : EXIT
SET TIME
Press PUSH JOG %fi to set the time, then press OK or
PUSH JOG
.
5
6
● Press and hold either button to delay or advance the
time by 30 minutes.
SET DATE
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG
.
● Press and hold either button to change the date by 15
days.
SET YEAR
Press PUSH JOG %fi to set the year.
7
8
START CLOCK OPERATION
NOTE:
Press MENU.
If the year digits are automatically cleared, it is possible that you
have input 29th February for a non-leap year. Input the correct data.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
10
EN
You can choose whether or not to have various operational
indicators appear on screen, by setting this function ON or OFF.
On-Screen
Displays
TURN ON THE RECORDER
Press
.
1
ACCESS MAIN MENU
Turn on the TV and select the VIDEO channel (or AV mode).
SCREEN
Press MENU.
2
3
ACCESS MODE SET SCREEN
Place the pointer next to "MODE SET" by pressing
PUSH JOG %fi, then press OK or PUSH JOG
.
1
4
7
2
5
8
3
6
9
2
ENABLE/DISABLE
ON-SCREEN DISPLAY
4
0
The default setting is
MODE SET
“ON”, so if you want on-
AUTO TIMER
OFF
ON
4
screen displays, leave the
O. S. D.
setting as it is and go to
B. E. S. T.
ON
AUTO SP=LP TIMER OFF
step 5. If you don’t want
the displays to appear,
press PUSH JOG %fi to
place the pointer next to
"O.S.D." and press OK or
PUSH JOG to set to
"OFF".
COLOUR SYSTEM PAL/NTSC
1
[5∞] =
[MENU] : EXIT
OK
● "AUTO SP→LP TIMER" appears only with the
HR-J459EE.
MENU
PUSH JOG
RETURN TO NORMAL
Press MENU.
5
NOTES:
● When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting.
● During playback, the operation mode indicators may be
disturbed depending on the type of tape being used.
The superimposed indication on the TV screen tells you what the recorder is doing.
1– Operation mode indicators
2– Channel position number and station name*/Aux. indicator
(F-1)
3
1
* Displayed if you have set station names manually
(੬ pg. 36, 37).
q6
]
2
4
5
PR. 12 ARD
21 : 00
SP
8
3– Cassette loaded mark
24. 12. 98
4– Clock display
5– Current day/month/year
6– Tape remaining time indicator (੬ pg. 17)
7– Counter display
8– Tape speed SP/LP/EP (EP is for NTSC playback only)
(HR-J459EE only)
7
–1 : 23 : 45
REMAIN 1 : 00
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON COLOUR SYSTEM
EN
11
You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this recorder. Follow the procedure
below to select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on this recorder;
MESECAM is the designation for tapes with SECAM signals that have
been recorded on a MESECAM-compatible PAL video cassette
recorder.
Colour
System Set
TURN ON THE RECORDER
Press
.
1
ACCESS MAIN MENU
SCREEN
1
4
7
2
5
8
3
6
9
Press MENU.
2
2
3
ACCESS MODE SET SCREEN
4
0
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
MODE SET
"MODE SET", then press
AUTO CH SET
OK or PUSH JOG
.
MANUAL CH SET
INITIAL SET
1
[5 ] =
∞
[MENU] : EXIT
SELECT COLOUR SYSTEM
MODE
OK
MENU
Press PUSH JOG %fi to
MODE SET
PUSH JOG
place the pointer next to
AUTO TIMER
O. S. D.
OFF
4
5
"COLOUR SYSTEM", then
press OK or PUSH JOG
to select the appropriate
colour system.
ON
ON
B. E. S. T.
AUTO SP=LP TIMER OFF
COLOUR SYSTEM PAL/NTSC
[5∞] =
[MENU] : EXIT
a- PAL/NTSC: To record PAL signals, or play back a
PAL or NTSC tape.
b- MESECAM: To record SECAM signals, or play back a
MESECAM tape.
● "AUTO SP→LP TIMER" appears only with the
HR-J459EE.
RETURN TO NORMAL
NOTES:
SCREEN
About NTSC Playback
● Some TVs shrink the picture vertically and place black bars at
the top and bottom of the screen. This is not a malfunction on
the part of either the video recorder or the TV.
● The picture may roll up and down. This can be corrected
using the V-HOLD control found on some TVs. (This cannot
be corrected if the TV does not have a V-HOLD control.)
● The counter and tape remaining time readings may be
incorrect.
Press MENU.
● During search, still, or frame-by-frame playback, the picture
may be distorted, and there may be a loss of colour.
● Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
12
EN
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
Basic
LOAD A CASSETTE
Playback
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
1
point toward the recorder. Don’t apply too much
pressure when inserting.
Turn on the TV and select the VIDEO channel (or AV mode).
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● If the record safety tab has been removed, playback
begins automatically. (੬ pg. 16)
FIND PROGRAMME START
POINT
If the tape is advanced past the start point, press REW.
To go forward, press FF.
2
3
4
START PLAYBACK
Press PLAY. “BEST” appears blinking in the recorder's
display panel during automatic tracking. (੬ pg. 18)
STOP PLAYBACK
Press STOP on the remote or STOP/EJECT on the
recorder’s front panel. Then press STOP/EJECT to
remove the cassette.
1
4
7
2
5
8
3
6
9
2
Usable cassettes
4
0
1
FF
REW
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back a recorded Super VHS tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Variable-Speed Search
ACTIVATE VARIABLE-SPEED
SEARCH
Playback
Features
During playback, press PUSH JOG or
.
● The more times you press, the faster the playback
picture moves.
● To decrease speed, press the button for the opposite
direction.
1
To resume normal playback, press PLAY.
REW
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
Press PAUSE. If there is vertical jitter, use the TV PROG
buttons to correct the picture.
1
ACTIVATE FRAME-BY-FRAME
PLAYBACK
Press PAUSE.
1
4
7
2
5
8
3
6
9
OR
2
2
Press PUSH JOG or
.
To resume normal playback, press PLAY.
4
0
Slow Motion
ACTIVATE SLOW-MOTION
1
PLAYBACK
FF
During still picture, press and hold PAUSE for 2
REW
seconds, then release. Press and release again to return
1
to still picture.
PAUSE
OR
During still picture, press and hold PUSH JOG or
.
Release to return to still picture.
PUSH JOG
To resume normal playback, press PLAY.
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
1
ATTENTION
In the search, still, slow-motion or frame-by-frame
playback mode,
To resume normal playback, press PLAY.
● the picture will be distorted.
● the noise bars will appear.
● there will be a loss of colour with an LP-recorded tape
(HR-J459EE only).
NOTE:
For short searches, press and hold FF or REW for over 2
seconds. When released, normal playback resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
14
EN
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG buttons.
REVIEW
1
4
7
2
5
8
3
6
9
2
OVERRIDE AUTOMATIC
TRACKING
Press
(SP/LP) on the remote to engage manual
tracking.
4
0
1
2
3
TV PROG
30 SEC
ADJUST TRACKING
MANUALLY
1
Press TV PROG + or – to adjust tracking.
FF
REW
PAUSE
RETURN TO AUTOMATIC
TRACKING
Press SP/LP (
tracking.
) on the remote to re-engage automatic
PUSH JOG
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Repeat Playback
Your video recorder can automatically play back the whole tape
50 times repeatedly.
START PLAYBACK
PressPLAY.
1
ACTIVATE REPEAT
PLAYBACK
Press PLAY and hold for over 5 seconds, then release.
● The Play indicator ( ) on the display panel blinks
2
slowly.
● The tape plays 50 times automatically, and then
stops.
STOP PLAYBACK
Press STOP at any time to stop playback.
3
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
Index Search
Next Function Memory
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
You can set your recorder's power to go off automatically after
the tape is fully rewound. Before starting, make sure the
recorder is in the Stop mode.
£ 2
For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press
within 2 seconds.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Skip Search
SKIP OVER UNWANTED
SECTIONS
ACTIVATE INDEX SEARCH
Press PUSH JOG or (™ or £) on the remote
control. “™ 1” or “£ 1” is displayed on screen
and search begins in the corresponding direction.
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
1
1
● To access index codes 2 through 9, press PUSH JOG
or
repeatedly until the correct index number is
NOTE:
displayed.
To return to normal playback during a Skip Search, press PLAY.
Ex.: To locate the beginning of B from the current
position, press PUSH JOG twice.
To locate the beginning of D from the current
position, press PUSH JOG once.
Current position
A
B
C
D
E
F
–2
–1
1
2
3
Index number
● When the specified index code is located, playback
begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT REVIEW
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
1
● The front display panel tells you how many
programmes have been recorded. If you have, for
example, 3 programmes, “REVIEW” and "3" appear
and blink. To watch the first of the 3 programmes,
press REVIEW three times. The recorder searches and
begins playback automatically. You can access a
programme as far as 9 index codes away from the
current tape position.
NOTES:
● Instant ReView is not possible while the recorder is in the
Timer mode.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
(੬ pg. 28).
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
16
EN
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
Basic
LOAD A CASSETTE
Insert a cassette with the record safety tab intact.
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
1
CHOOSE A PROGRAMME
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
2
SET TAPE SPEED
(HR-J459EE ONLY)
Press
(SP/LP). Check the SP/LP indicator on the
TV PROG
recorder display panel to confirm the selected tape
3
4
speed.
START RECORDING
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
With HR-J459EE:
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (੬ pg. 18).
1
4
7
2
5
8
3
6
9
2
With HR-J259EE:
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette (੬ pg. 18).
NUMBER
4
0
PAUSE/RESUME
TV PROG
SP/LP
PLAY
RECORDING
Press PAUSE. Press PLAY to resume recording.
1
5
6
STOP RECORDING
PAUSE
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
RECORD
Recording Resume
Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless
the recorder's memory backup has expired.
Accidental erasure prevention
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
Record One Programme
While Watching Another
Recording
Features
SELECT CHANNEL TO
WATCH
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
1
● The programme selected with the TV’s channel
controls appears on the TV screen while the one
selected with the TV PROG buttons is recorded on
the tape.
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
Press DISPLAY until a counter reading appears on the
dispay panel.
1
DISPLAY
1
4
7
2
5
8
3
6
9
RESET COUNTER
2
Press C. RESET before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact
2
elapsed time as the tape runs.
● The HR-J259EE owners can use the COUNTER RESET
button on the recorder's front panel as well.
4
0
C.RESET
TV PROG
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
START RECORDING
RECORD
Press RECORD on the recorder.
1
ENGAGE ITR MODE
the front display panel.
Tape Remaining Time
Press RECORD again. " " blinks and 0:30 appears on
2
DISPLAY REMAINING TIME
appears.
Press DISPLAY until the time remaining on the tape
SET RECORDING DURATION
RECORD to extend the time. Each press extends
recording time by 30 minutes.
1
If you want to record for more than 30 minutes, press
● The display panel shows the tape remaining time
with "
" displayed.
3
● By pressing the DISPLAY button, you can change the
display to show the counter reading, channel
position*, clock time or tape remaining time.
* channel position is not displayed during playback.
NOTES:
● You can only perform ITR using the RECORD button on the
recorder's front panel.
NOTE:
● After you set the ITR time, the counter display appears.
● To check the remaining time, press RECORD once during
recording and the remaining time will be displayed for about
5 seconds. Be careful not to press RECORD again within
these 5 seconds, or you will round the recording time up to
the next 30 minute increment.
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "– –:– –" may sometimes appear, or the display
may blink on occasion.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING (cont.)
18
EN
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is “ON”.
B.E.S.T. Picture
System
Preparation
TURN THE RECORDER ON
Turn on the TV and select the VIDEO channel (or AV mode).
Press
.
1
ACCESS MAIN MENU
SCREEN
Press MENU.
2
3
ACCESS MODE SET SCREEN
Place the pointer next to
MAIN MENU
"MODE SET" by pressing
MODE SET
PUSH JOG %fi, then press
AUTO CH SET
OK or PUSH JOG
.
MANUAL CH SET
INITIAL SET
5
[
∞] =
[MENU] : EXIT
1
4
7
2
5
8
3
6
9
SELECT MODE
2
Place the pointer next to
"B.E.S.T." by pressing
MODE SET
AUTO TIMER
O. S. D.
OFF
ON
4
5
PUSH JOG %fi, then press
OK or PUSH JOG to set
to "ON" or "OFF".
B. E. S. T.
ON
AUTO SP=LP TIMER OFF
4
0
COLOUR SYSTEM PAL/NTSC
● "AUTO SP→LP TIMER"
appears only with the
HR-J459EE.
[5∞] =
[MENU] : EXIT
1
PLAY
RETURN TO NORMAL
SCREEN
PAUSE
OK
Press MENU.
RECORD
MENU
PUSH JOG
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
Recording
Playback
The recorder assesses the quality of the tape once you initiate
playback.
START RECORDING
Press and hold RECORD and press PLAY on the remote,
or press RECORD on the recorder.
DURING B.E.S.T.
START PLAYBACK
1
PressPLAY.
1
● The recorder adjusts the playback picture quality
based on the quality of the tape in use.
B.E.S.T. COMPLETE
● B.E.S.T. is active during Auto Tracking. “BEST”
appears blinking on the recorder’s display panel.
NOTES:
● When watching a tape recorded with “B.E.S.T.” set to “ON”,
it is recommended that you leave B.E.S.T. on during playback
as well.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
● When watching a rental tape or one recorded on another
video recorder, or when using this recorder as the player for
editing, set B.E.S.T. to your preference by performing steps 1
through 5 on page 18.
● "BEST" only appears at the beginning of automatic tracking.
Even though it doesn't appear after that, the B.E.S.T. function
is operative.
NOTES:
● With HR-J459EE:
The B.E.S.T. system works for both SP and LP modes only after
a tape has been inserted and the Record mode is first
initiated. It does not work during recording.
With HR-J259EE:
The B.E.S.T. system works only after a tape has been inserted
and the Record mode is first initiated. It does not work during
recording.
● The B.E.S.T. system does not work while Auto Satellite Prog
recording is in progress (੬ pg. 28).
● In the case of timer recording, the B.E.S.T. system works
before recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled.
The next time the cassette is used for recording, B.E.S.T. is re-
performed.
● Pressing the recorder's RECORD button while "BEST" is
displayed does not start Instant Timer Recording (੬ pg. 17).
ATTENTION
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
RECORD and PLAY on the remote are pressed, or RECORD
on the recorder is pressed. To make sure you record the
desired scene or programme in its entirety, first perform the
following steps:
1) Press and hold PAUSE and press RECORD to engage the
RECORD PAUSE mode.
● The recorder then automatically checks the condition
of the tape and, after approximately 7 seconds, re-
enters RECORD PAUSE.
2) Press PLAY to start recording.
● If you want to bypass the B.E.S.T. system and begin
recording immediately, set “B.E.S.T.” to “OFF” in step
4 on page 18.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
20
EN
The SHOWVIEW timer programming system eliminates the need
to input channel, date, start and stop time data when setting the
timer record function. Simply key in the SHOWVIEW number for
the TV program you wish to record (found in most TV listings)
and the recorder’s timer is automatically programmed.
SHOWVIEW
Setup
You have to set "GUIDE PROG" numbers, which are assigned to
each station for purposes of SHOWVIEW timer programming, for all
the stations stored in your recorder's memory to get proper results.
Before SHOWVIEW setup you must have performed the following
procedures:
● Tuner setting (੬ pg. 6, 32)
● Clock setting (੬ pg. 6, 9)
Turn on the TV and select the VIDEO channel (or AV mode).
IMPORTANT
Perform the following procedure after Auto Set Up on page 6
and/or the channel setting steps on pages 32 – 37.
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
1
4
7
2
5
8
3
6
9
2
NUMBER
Guide Program Number Set
ACCESS MAIN MENU
4
0
SCREEN
Press MENU.
1
1
ACCESS INITIAL SET
SCREEN
Press PUSH JOG %fi to place the pointer next to
"INITIAL SET", then press OK or PUSH JOG
.
OK
2
3
4
MENU
ACCESS GUIDE PROG SET
PUSH JOG
SCREEN
Press PUSH JOG %fi to place the pointer next to
"GUIDE PROG SET", then press OK or PUSH JOG
.
ENTER GUIDE PROG
NUMBER
Press PUSH JOG %fi or
GUIDE PROG SET
NUMBER keys to enter the
Guide Program number for
GUIDE PROG
2
TV PROG
5
the desired station as shown
in the TV listings. Then
press OK or PUSH JOG
.
ATTENTION
[5∞] =
For a list of Guide Prog. Numbers for Poland, Czech
Republic, Hungary, and Russia, refer to page 42 of the
instruction manual printed in the corresponding language.
[MENU] : EXIT
(Ex.) When inputting the
Guide Program
number 2 for RTR.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
ENTER RECEIVING
CHANNEL POSITION
NUMBER
NUMBER keys to input the
number of the recorder's
channel position on which
the Guide Program
Press PUSH JOG %fi or
GUIDE PROG SET
5
6
GUIDE PROG
2
TV PROG
1
4
7
2
5
8
3
6
9
2
2
NUMBER
number's broadcast is
received. Then press OK
RTR
or PUSH JOG
.
[5 ] =
∞
[MENU] : EXIT
● If the satellite broadcast
is received on your
4
0
(Ex.) If RTR is received on
channel position 2.
recorder's auxiliary
channel "F-1", select "F-1" for the channel position.
● Repeat steps 4 and 5 as necessary.
1
RETURN TO NORMAL
SCREEN
Press MENU.
OK
MENU
PUSH JOG
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area, for
SHOWVIEW timer recording. The Guide Program numbers can
be found in most TV listings.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
22
EN
With SHOWVIEW, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
SHOWVIEW
Timer
ACCESS SHOWVIEW SCREEN
Press PROG..
SHOWVIEW
1
Programming
[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
Before performing SHOWVIEW Timer Programming:
● Be sure to read "SHOWVIEW Setup" (੬ pg. 20).
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
The front display panel looks like this:
● Turn on the TV and select the VIDEO channel (or AV mode).
ENTER SHOWVIEW NUMBER
Press the NUMBER keys to
SHOWVIEW
enter the SHOWVIEW
1 2 34 5 6 7 8
2
3
number of a programme
you wish to record.
● If you make a mistake,
press CANCEL and input
the correct number.
[0 – 9] =
CANCEL
1
4
7
2
5
8
3
6
9
[
] : DELETE
2
[PROG] : EXIT
NUMBER
The SHOWVIEW number you enter appears on the front
display panel:
4
0
CANCEL
PROG.
The display panel can show only a 4-digit number.
ACCESS SHOWVIEW PROGRAM
SCREEN
1
Press OK, and the
– P1 –
SHOWVIEW
START
123456789
SHOWVIEW Program screen
appears (if you’re just
starting out, “P1” appears).
STOP
22:00
21:00
=
SP
VPS/PDC OFF
OK
The display panel shows the
programme start time.
Pressing PROG. CHECK
changes the display to the
programme stop time, then
the date and channel position.
DATE
25.12
TV PROG
1
RTR
: OK
"SP" is not displayed
with the HR-J259EE.
SP
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "SHOWVIEW Setup"
on page 20 and set the Guide Program number for
that SHOWVIEW number correctly.
● If the number you entered is invalid, "ERROR" appears
on the screen and "Err" appears on the display panel.
Press CANCEL and input a valid SHOWVIEW number.
● If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 23.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
SET TAPE SPEED (HR-J459EE ONLY)
Press SP/LP (
) to set the tape speed.
4
5
SET VPS MODE
Press VPS (NUMBER key "7") to select "ON" or "OFF".
If "VPS/PDC OFF" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS is set to OFF.
If "VPS/PDC ON" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS is set to ON.
੬ "VPS Recording" on page 25.
1
4
7
2
5
8
6
9
2
NUMBER
VPS
WEEKLY
TIMER
● PDC (Programme Delivery Control) recording is not
possible with this recorder.
4
0
RETURN TO NORMAL SCREEN
Press PROG. or OK. "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
STOP+/–
PROG.
6
7
1
● Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER’S TIMER MODE
Press TIMER. The recorder turns off automatically and
‰ appears on the display panel.
OK
● To disengage the timer, press TIMER again.
PUSH JOG
NOTES:
● To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
● To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL"
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (੬ pg. 26).
● It is not possible to timer-record a TV programme with a
SHOWVIEW number which starts with "0".
Satellite Tuner Users
ATTENTION
To timer-record a satellite broadcast using SHOWVIEW:
1 Perform steps 1 – 7.
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the SHOWVIEW number you
entered has not been set.
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
● Press the NUMBER keys or PUSH JOG %fi to input the
channel position number on which your recorder
receives that station, then press OK or PUSH JOG
.
The SHOWVIEW program screen appears.
GUIDE PROG SET
(Ex.) To timer-record a RTR
programme with SHOWVIEW.
* If your recorder receives
RTR on the channel position
2, press OK or PUSH JOG
after entering "2".
GUIDE PROG
2
TV PROG
– –
5
[
∞] =
[PROG] : EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
24
EN
If you don’t know the SHOWVIEW number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
Express Timer
Programming
ACCESS SHOWVIEW
SCREEN
Press PROG..
Before performing Express Timer Programming:
● Make sure that the recorder's built-in clock is set
properly.
1
ACCESS PROGRAMME
SCREEN
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
Press START +/–. (If you’re
– P1 –
just starting out, “P1”
START
– –:– –
STOP
2
appears.)
=
– –:– –
SP
VPS/PDC OFF
DATE
TV PROG
– –
– –.– –
[+/–] =
[PROG] : EXIT
The front display panel looks like this:
1
4
7
2
5
8
6
9
2
SP
WEEKLY
TIMER
"SP" is not displayed with the HR-J259EE.
0
ENTER PROGRAMME
START TIME
TV PROG+/–
START+/–
PROG.
Press START +/– to enter
the time you want
recording to start.
– P1 –
START
21:00
STOP
1
3
=
– –:– –
SP
VPS/PDC OFF
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
DATE
TV PROG
– –
– –.– –
[+/–] =
[PROG] : EXIT
OK
The front display panel looks like this:
SP
ENTER PROGRAMME STOP
TIME
Press STOP +/– to enter the time you want recording to
stop.
4
5
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
Satellite Tuner Users
To timer-record a satellite broadcast using Express Timer
Programming:
ENTER CHANNEL POSITION
Press TV PROG +/–.
– P1 –
1 Perform steps 1 – 10. Enter "F-1" for the channel
position in step 6.
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
START
21:00
STOP
22:00
6
=
SP
VPS/PDC OFF
DATE
25.12
TV PROG
1
RTR
[+/–] =
[PROG] : EXIT
SP
VPS Recording
Now available from some TV stations, VPS (Video
Programme System) is a service designed to assure safe,
accurate timer recording. With this system, special code
signals are transmitted together with the audio/video
signals. These code signals control your video recorder and
have precedence over the advertised times you may have
preset into the timer. This means that your recorder will
start and stop recording when the preset TV programmes
actually start and end — even if the broadcast time of a
preset TV programme is changed.
SET TAPE SPEED
(HR-J459EE ONLY)
Press SP/LP (
) to set the tape speed.
7
8
SET VPS MODE
Press VPS (NUMBER key "7") to select "ON" or "OFF".
If "VPS/PDC OFF" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS is set to OFF.
If "VPS/PDC ON" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS is set to ON.
੬ "VPS Recording" in the right column.
NOTE:
When you use Express Timer Programming, set the start
time (VPS time) exactly as advertised in the TV listing. A
different time than advertised will result in no recording.
● PDC (Programme Delivery Control) recording is not
possible with this recorder.
RETURN TO NORMAL
SCREEN
After confirming all information is correct, press PROG.
or OK. "PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
9
● Repeat steps 1 – 9 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
Press TIMER. The recorder turns off automatically and
‰ appears on the display panel.
10
● To disengage the timer, press TIMER again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 9, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (੬ pg. 26).
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
26
EN
Check, Cancel And Replace
Programmes
DISENGAGE TIMER MODE
Press TIMER, then press
.
1
2
1
4
7
2
5
8
3
6
9
ACCESS PROGRAM CHECK
SCREEN/DISPLAY
2
Press PROG. CHECK.
PR START STOP CH
DATE
24.12
25.12
25.12
VPS
1
2
3
4
5
6
7
8
8:00 10:00
10:00 10:45
11:30 13:00
3
2
1
TIMER
4
0
CANCEL
TV PROG+/–
START+/–
PROG.
1
[PROG CHECK] : NEXT
ACCESS PROGRAM SCREEN/
DISPLAY
OK
MENU
Press PROG. CHECK again
– P1 –
to check more informa-
PUSH JOG
START
8:00
STOP
10:00
tion. Each time you press
PROG. CHECK, the next
programme's information
appears.
3
=
SP
VPS/PDC OFF
DATE
24.12
TV PROG
1
RTR
"SP" is not displayed
with the HR-J259EE.
[PROG CHECK] : NEXT
SP
● The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and the channel position.
To cancel or replace a programme...
CANCEL OR REPLACE A
PROGRAMME
Press CANCEL to cancel a programme. To replace a
programme, press the appropriate button: START+/–,
STOP+/–, DATE+/–, TV PROG+/–, VPS, SP/LP (
)
4
(J459EE only).
RETURN TO NORMAL SCREEN/
DISPLAY
Press PROG. CHECK as many times as necessary. If
there are still some programmes remaining, go on to
step 6.
5
6
RETURN TO TIMER MODE
Press TIMER.
NOTE:
You can also check the programmes on the display panel even if
the recorder's power is off or the recorder is in the Timer mode;
however, it is not possible to cancel or replace the programmes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
→
Auto SP LP Timer
Auto Timer
When the Auto Timer is set to ON, the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
(HR-J459EE only)
If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode to allow complete recording.
For Example . . .
Recording a PAL-broadcast programme of 210 minutes in length
onto a 180-minute tape.
ACCESS MAIN MENU
SCREEN
Press MENU.
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP mode
1
Total 210 minutes
Make sure you set "AUTO SP→LP TIMER" to "ON" at the Mode
Set screen before the timer-recording starts.
ACCESS MODE SET SCREEN
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
MODE SET
2
"MODE SET", then press
ACCESS MAIN MENU
AUTO CH SET
MANUAL CH SET
INITIAL SET
OK or PUSH JOG
.
SCREEN
Press MENU.
[5 ] =
∞
1
[MENU] : EXIT
ACCESS MODE SET SCREEN
SELECT MODE
Press PUSH JOG %fi to place the pointer next to
"MODE SET", then press OK or PUSH JOG
.
Press OK or PUSH JOG
to select either "ON" or
"OFF".
MODE SET
2
3
AUTO TIMER
O. S. D.
ON
ON
ON
3
B. E. S. T.
SELECT MODE
place the pointer next to
"AUTO SP→LP TIMER",
then press OK or PUSH
JOG to select "ON".
● "AUTO SP→LP TIMER"
appears only with the
HR-J459EE.
AUTO SP=LP TIMER OFF
COLOUR SYSTEM PAL/NTSC
Press PUSH JOG %fi to
MODE SET
AUTO TIMER
OFF
ON
ON
ON
O. S. D.
[5∞] =
[MENU] : EXIT
B. E. S. T.
AUTO SP=LP TIMER
COLOUR SYSTEM PAL/NTSC
RETURN TO NORMAL
[5∞] =
[MENU] : EXIT
SCREEN
Press MENU.
RETURN TO NORMAL
4
SCREEN
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
4
NOTES:
● If you have programmed the recorder to timer-record 2 or
more programmes, the second programme and those
thereafter may not fit on the tape if you set "AUTO SP→LP
TIMER" to "ON". In this case, make sure the mode is not
engaged, then set the tape speed manually during timer
programming.
● In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
● There may be some noise and sound disturbance at the point
on the tape where the recorder switches from SP to LP mode.
● The Auto SP→LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
● If you perform timer recording with both VPS and the Auto
SP→LP Timer activated, and the programme goes beyond its
originally scheduled length, there may be times when the
programme cannot be recorded in its entirety.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
28
EN
This facility allows you to record automatically a satellite
programme which is timer-programmed on your external
satellite tuner. Connect a satellite tuner to the recorder's AUDIO
IN/VIDEO IN connectors and programme the timer on the
satellite tuner; the recorder starts recording when the signals
input from the satellite tuner to the AUDIO IN/VIDEO IN
connectors, and when there is no input signals the recorder
stops recording and the power shuts off.
Automatic
Satellite
Programme
Recording
Before performing the following steps:
● Programme the timer on the satellite tuner.
● Insert a cassette with the safety tab in place.
SET TAPE SPEED
(HR-J459EE ONLY)
Press SP/LP (
) to set the tape speed.
1
2
ENGAGE AUTO SATELLITE
PROG REC MODE
REC LINK indicator
Press and hold REC LINK for about 2 seconds. The REC
LINK indicator lights up and the recorder turns off
automatically.
● To disengage the Auto Satellite Prog Rec mode, press
REC LINK. The REC LINK indicator goes off.
● If the recorder's power is off, it is not possible to
engage the Auto Satellite Prog Rec mode.
ATTENTION
● Be sure to not turn on the satellite tuner before the
programme is executed; otherwise, the recorder will start
recording when the satellite tuner's power is turned on.
● If you have connected another appliance other than a
satellite tuner to the AUDIO IN/VIDEO IN connectors, be
sure to not engage the Auto Satellite Prog Rec mode;
otherwise, the recorder will start recording when the
connected appliance's power is turned on.
● Auto Satellite Prog recording and timer-recording cannot
be done at the same time.
NOTES:
● For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.
● Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.
● The REC LINK indicator blinks while Auto Satellite Prog recording is in progress.
● Pressing the recorder's
button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengages
the Auto Satellite Prog Rec mode.
● If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the
different tape speed per each; the tape speed selected in step 1 will be applicable to all the programmes for Auto Satellite Prog
recording (HR-J459EE only).
● The B.E.S.T. system (੬ pg. 18) does not work while Auto Satellite Prog recording is in progress.
● Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record
slightly longer than the actual length of the programme.
● If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto
Satellite Prog recording even though the REC LINK indicator blinks. When the satellite tuner shuts off once and is turned back on
again, the recorder starts recording.
● When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is
finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".
● After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for
the Instant ReView function (੬ pg. 15).
● You can also record a programme from your cable system in the same way if the system has a timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
EN
29
TV Multi-brand Remote
Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
VCR
Before you start . . .
● Turn on the TV using its remote control.
TV/VCR
1
4
7
2
5
8
3
6
9
2
SET TV BRAND CODE
the recorder's remote control, enter your TV’s brand
code using the NUMBER keys, then press STOP.
Check if the TV's power goes off as it should. If it does,
try other operations (੬ step 2)
NUMBER
Refer to the chart below. While holding down TV on
1
2
TIMER
0
CANCEL
● Once you have set the remote control to operate the
TV, you don't have to repeat this step until you
replace your remote control's battteries.
● SAMSUNG has two codes. If the TV does not
function with one code, try entering another.
1
OPERATE TV
STOP
First, press TV to set the remote control to TV mode, then
OK
press the corresponding button:
TV/VCR, TV VOL +/– (Volume),
NUMBER keys.
, TV PROG +/–,
(Muting),
TV PROG+/–
TV VOL+/–
● For some brands of TV, you must press OK after
having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
TV BRAND NAME
CODE
ATTENTION
JVC
01, 16
02
The remote control can operate not only the video recorder
but also some of your TV's functions.
PANASONIC
SONY
03
● To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode.
SHARP
04
TOSHIBA
MITSUBISHI
HITACHI
SANYO
05
06
07
08
FUNAI
AIWA
09
10
DAEWOO
SAMSUNG
LG/GOLDSTAR
THOMSON
FERGUSON
PHILIPS
GRUNDIG
ITT
11
Control Your TV Using
Additional Buttons
12, 16
13
14
15
Use the NUMBER keys, and the
button, CANCEL
16
button or TIMER button to select the TV’s channel.
17
● With televisions under Code 01, 02, 03, 05, 07, 15 or 22,
18
the
button corresponds to the 1-digit/2-digit entry
MIVER
19
switching button (often labelled – /– –) of your TV’s remote
control.
FINLUX
NOKIA
20
21
● With televisions under Code 01, 08, 18 or 19, the CANCEL
button corresponds to the 10 + button, and the TIMER
button corresponds to the 20 + button of your TV’s remote
control.
NEC
22
NOTE:
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
30
EN
You can use your video recorder as the source player and
another video recorder as the recording deck.
Edit To
Another Video
Recorder
MAKE CONNECTIONS
Connect the player’s AUDIO/VIDEO OUT connectors
to the recorder’s AUDIO/VIDEO IN connectors.
1
SET RECORDING DECK’S
INPUT MODE
Set the recording deck's external input mode.
2
PLAY
START SOURCE PLAYER
Press PLAY on the source player.
3
START RECORDING DECK
TV Receiver
Source player
Your recorder
Engage its Record mode.
4
NOTES:
● All necessary cables can be obtained from your dealer.
● If you do not want to record the superimposed indication on
the editied tape, be sure to set "O.S.D." to "OFF" before you
start editing (੬ pg. 10).
AV Cable
(not provided)
VIDEO
CHANNEL
RF Cable (provided)
Another recorder
Recording deck
Remote A/B Code
Switching
VCR
The remote control is capable of controlling two JVC video
recorders independently; one set to respond to the remote
control’s A code control signals and another set to respond to
B code control signals. The remote control is preset to send A
code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B code signals.
NUMBER "2"
2
1
4
7
2
5
8
NUMBER "1"
6
9
1 Unplug the mains power cord from the mains outlet.
4
0
2 While holding down
on the remote control, press the
VCR
NUMBER key "2" and then press STOP.
3 Plug the mains power cord back into the mains outlet.
4 Press
on the remote control. The recorder will now
only respond to B code signals.
1
NOTE:
To set the recorder back to respond to A code signals, repeat
the same procedure as shown above except pressing
NUMBER key "1" instead of "2" in step 2.
STOP
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
You can use a camcorder or another video recorder as the
source player and your video recorder as the recording deck.
Edit From A
Camcorder Or
Another Video
Recorder
MAKE CONNECTIONS
Connect the AUDIO/VIDEO OUT connectors on the
camcorder or another video recorder to the front panel
1
AUDIO/VIDEO input connectors on the recording deck.
SET RECORDER’S INPUT
MODE
Press NUMBER key "0" so that "F-1" appears on the
display panel.
2
3
4
START SOURCE PLAYER
Engage its Play mode.
START RECORDING DECK
1
4
7
2
5
8
3
6
9
2
Engage its Record mode.
4
0
NUMBER "0"
Recording deck
Your recorder
1
VIDEO IN
AUDIO IN
Source player
AV Cable
(not provided)
VIDEO OUT
AUDIO OUT
Camcorder
or
Another video recorder
Source player
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET
32
EN
Turn on the TV and select the VIDEO channel (or AV mode).
IMPORTANT
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set
Up function (੬ pg. 6).
— you have moved to a different area or if a new station
starts broadcasting in your area.
Your recorder needs to memorise all necessary stations in
channel positions in order to record TV programmes. Auto
Channel Set automatically assigns all receivable stations in your
area to call them up by using the TV PROG buttons without
going through any vacant channel.
1
4
7
2
5
8
3
6
9
2
Auto Channel Set
4
0
TURN ON THE RECORDER
TV PROG
Press
.
1
2
3
1
ACCESS MAIN MENU
SCREEN
Press MENU.
OK
MENU
PUSH JOG
PERFORM AUTO CHANNEL
SET
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
MODE SET
"AUTO CH SET", then
AUTO CH SET
press OK or PUSH JOG
.
MANUAL CH SET
INITIAL SET
[5 ] =
∞
[MENU] : EXIT
● The Auto Set screen appears, and remains on screen
while the recorder
searches for receiv-
AUTO SET
able stations. As Auto
Channel Set
PLEASE WAIT
progresses, the "
"
mark on the screen
moves from left to
right.
+
+
+
0
[MENU] : EXIT
Wait until the
screen as shown
in step 4 appears.
Beginning
End
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
VIEW CHANNEL LIST
SCREEN
After "SCAN COMPLETED"
is displayed on the screen
for about 5 seconds, the
Channel List screen
PR CH
ID
PR CH ID
01 25 – – – – 07 C33 – – – –
02 C08 – – – – 08 C26 – – – –
4
5
03 10 – – – – 09
55 – – – –
04 C65 – – – – 10 C24 – – – –
05 C31 – – – – 11 C23 – – – –
06 C32 – – – – 12 C25 – – – –
looking like the one to the
right appears. The stations
your recorder located
appear on the Channel List
screen — channel
positions (PR) and
channels (CH).
1
4
7
2
5
8
3
6
9
5
[
∞]
2
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
C: Cable
4
0
The blueback screen and the program currently being
broadcast by the blinking station appear alternately for
8 seconds each.
To view the next page, use the PUSH JOG %fi button
on the remote control.
1
RETURN TO NORMAL
SCREEN
Press MENU.
OK
● Using the Channel List screen, you can skip or add
channel positions, enter station names and perform
other operations. Refer to pages 34 – 37 for the
procedures.
MENU
PUSH JOG
NOTES:
● Fine tuning is performed automatically during Auto Channel
Set. If you want to perform it manually, refer to page 35.
● If you perform Auto Channel Set when the aerial cable is not
connected properly, "SCAN COMPLETED -NO SIGNAL-"
appears on the screen in step 4. When this happens, make
sure of the aerial connection and press OK; Auto Channel Set
will take place again.
IMPORTANT
● If no sound accompanies the picture on some channels
that have been stored by Auto Channel Set, the TV
system setting for those channels may be incorrect. Select
the appropriate TV system for those channels. ੬ "TV
System Selection – When you see the picture but hear no
audio" on page 37.
● Since your video recorder memorizes all detected
stations even if the reception condition is poor, some of
those stored stations may produce a noisy picture. To
delete those stations, ੬ "Delete A Channel" on page 35.
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET (cont.)
34
EN
SELECT BAND
Press PUSH JOG %fi to
change the band between
CH (regular) and CC
TV
4
5
PR CH
ID
FINE SYSTEM
12 CH01 – – – – +/–
D/K
(cable), then press PUSH
JOG
.
1
4
7
2
5
8
3
6
9
5
[
[
∞] : SELECT
] : CURSOR +=
: OK
2
NUMBER
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
4
0
CANCEL
INPUT CHANNEL
Press the NUMBER keys to input the channel number you
1
want to store.
● Input "0" before any single number entries.
● To input the registered station name (ID – ੬ pg. 38),
press PUSH JOG until "– – – –" (ID setting) begins
blinking, then press PUSH JOG
● For fine tuning adjustment, press PUSH JOG until
%fi
.
OK
MENU
%
"+/–" begins blinking, then press PUSH JOG fi.
While tuning, “+” or “–” appears.
PUSH JOG
● To select the appropriate TV system, press PUSH JOG
until TV system setting (B/G or D/K) blinks, then
press PUSH JOG %fi. Refer to the table below.
ENTER NEW CHANNEL
Storing Channels Manually
INFORMATION
Store channels that were not stored during Auto Set Up (੬ pg. 6)
Press OK and the Channel List screen appears.
or Auto Channel Set (੬ pg. 32).
● Repeat steps 3 through 6 as necessary.
6
7
ACCESS MAIN MENU
CLOSE CHANNEL LIST
Press MENU.
SCREEN
1
Press MENU.
ACCESS CHANNEL LIST
● To change positions, see "Change Station Channel
Position" (੬ pg. 35).
● If you wish to set station names other than the ones
registered in your recorder, ੬ "Set Stations (B)" on
page 37.
SCREEN
Press PUSH JOG %fi to place the pointer next to
“MANUAL CH SET”, then press OK or PUSH JOG
.
2
3
The Channel List screen appears.
SELECT POSITION
Major Countries
TV System
Press PUSH JOG %fi
until an open position in
which you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
(Ex.) To store in position 12.
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland,
Sweden, Germany, Egypt
PR CH
ID
PR CH ID
01 25 – – – – 07 C33 – – – –
B/G
02 CDB – – – – 08 C26 – – – –
03 10 – – – – 09 55 – – – –
04 C65 – – – – 10 C24 – – – –
05 C31 – – – – 11 C23 – – – –
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland,
Russia
06 C32 – – – – 12
– – – –
D/K
[5
]
∞
=
: EDIT
= [CANCEL] : DELETE
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
Delete A Channel
Fine-Tuning Channels
Already Stored
Perform steps 1 and 2 of "Storing Channels Manually" on
page 34 to access the Channel List screen before continuing.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 34 to access the Channel List screen before continuing.
SELECT ITEM
%fi
Press PUSH JOG
until the item you want to delete
begins blinking.
SELECT CHANNEL TO
FINE-TUNE
1
2
%fi
Press PUSH JOG
until the channel you want to
DELETE CHANNEL
tune begins blinking.
Press CANCEL.
1
● The item directly beneath the cancelled one moves
up one line.
● Repeat steps 1 and 2 as necessary.
ACCESS MANUAL
CHANNEL SET SCREEN
Press OK twice. The Manual Channel Set screen
CLOSE CHANNEL LIST
appears.
SCREEN
2
3
Press MENU.
PERFORM TUNING
3
Press PUSH JOG until "+/–" begins blinking, then
%fi
press PUSH JOG
Then press OK.
until the picture is its clearest.
Change Station Channel
Position
● The Channel List screen appears.
● Repeat steps 1 through 3 as necessary.
Perform steps 1 and 2 of "Storing Channels Manually" on
CLOSE CHANNEL LIST
page 34 to access the Channel List screen before continuing.
SCREEN
Press MENU.
SELECT ITEM
4
%fi
Press PUSH JOG
until the item you want to move
begins blinking. Then press OK and the station name
1
2
(ID) and its channel (CH) number begin blinking.
SELECT NEW POSITION
channel position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
%fi
Press PUSH JOG
to move the station to the new
PR CH
ID
PR CH ID
PR CH
ID
PR CH ID
01 25 – – – – 07 C33 – – – –
02 C08 – – – – 08 C26 – – – –
01 25 – – – – 07 C33 – – – –
02 C65 – – – – 08 C26 – – – –
03 10 – – – – 09
55 – – – –
03 C08 – – – – 09
55 – – – –
04 C65 – – – – 10 C24 – – – –
05 C31 – – – – 11 C23 – – – –
06 C32 – – – – 12 C25 – – – –
04 10 – – – – 10 C24 – – – –
05 C31 – – – – 11 C23 – – – –
06 C32 – – – – 12 C25 – – – –
5
[
∞] : MOVE
: MANUAL CH SET
[5 ] : MOVE =
∞
[MENU] : EXIT
[MENU] : EXIT
● Repeat steps 1 and 2 as necessary.
CLOSE CHANNEL LIST
SCREEN
Press MENU.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET (cont.)
36
EN
Set Stations (A)
Set station names that are registered in your recorder.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 34 to access the Channel List screen before continuing.
SELECT ITEM
blinking.
1
4
7
2
5
8
3
6
9
%fi
Press PUSH JOG
until the item you want begins
2
1
4
0
ACCESS MANUAL
CHANNEL SET SCREEN
Press OK twice.
2
3
1
SELECT NEW STATION
Press PUSH JOG until
the station name (ID)
TV
FINE SYSTEM
06 CH45 – – – – +/– D/K
begins blinking, then press
OK
PR CH
ID
%fi
PUSH JOG
until the
MENU
new station’s name (ID)
you want to store begins
blinking.
Registered station names
(੬ pg. 38) appear as you
PUSH JOG
[5 ] : CHANGE ID
∞
[
] : CURSOR +=
: OK
[MENU] : EXIT
%fi
press PUSH JOG
.
SWITCH STATIONS
Press OK.
● The Channel List screen appears.
4
5
● Repeat steps 1 through 4 as necessary.
CLOSE CHANNEL LIST
SCREEN
Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
Set Stations (B)
TV System Selection - When
you see the picture but hear
no audio
Set station names other than the ones registered in your recorder.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 34 to access the Channel List screen and then perform
step 1 and 2 of "Set Stations (A)" on the left before continuing.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 34 to access the Channel List screen before continuing.
SELECT STATION NAME
SELECT CHANNEL
POSITION
want to change its TV system begins blinking, then
press OK. The Manual Channel Set screen appears.
CHARACTER
Press PUSH JOG until
the first letter of the station
%
Press PUSH JOG fi until the channel position you
TV
1
2
name begins blinking.
PR CH
ID
FINE SYSTEM
1
2
06 CH45 ARD +/–
D/K
SELECT TV SYSTEM
5
[
[
∞] : A-Z, 0-9
] : CURSOR +=
: OK
Press PUSH JOG until TV system setting (D/K or B/G)
%
begins blinking and then press PUSH JOG fi to select
[MENU] : EXIT
the appropriate TV system. Refer to the table on page
34 also.
ENTER NEW CHARACTER
Press PUSH JOG %fi to cycle through the characters
RETURN TO CHANNEL LIST
(A–Z, 0–9, –, , +, (space) ) and stop when the
*
SCREEN
desired character is indicated, then press PUSH JOG
to enter. Enter the remaining characters the same way
(maximum of 4).
Press OK.
● The Channel List screen appears.
● Repeat steps 1 through 3 as necessary.
After entering all characters, press OK.
3
4
● The Channel List screen appears.
● If you make a mistake, press PUSH JOG until the
incorrect character begins blinking. Then enter the
CLOSE CHANNEL LIST
%fi
correct character by pressing PUSH JOG
.
SCREEN
Press MENU.
CLOSE CHANNEL LIST
SCREEN
Press MENU.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET (cont.)
38
EN
TV Station And ID List
ID*
STATION NAME
ID*
STATION NAME
1000
3SAT
ADLT
ANT3
ARD
ARTE
BBC
TV1000
3SAT
ORF2
ORF3
OWL3
PREM
PRO7
RAI1
RAI2
RAI3
RET4
21
ORF2
ORF3
ADULT
ANTENA3
ARD
OWL3
PREMIERE
PRO7
ARTE
RAI1
BBC GROUP
BBC1
RAI2
BBC1
BBC2
BR3
RAI3
BBC2
RETE4
BAYERN3
CANAL PLUS
PORTUGUSES
CANALE5
CHANNEL4
CHANNEL5
CHILD
TELE21
RTBF1 or 2
RTL
C+
C1
RTBF
RTL
CAN5
CH4
RTL2
RTL4
RTL5
RTP
S4
SAT1
SBS
SHOW
SIC
SKY
SKYN
SPRT
SRTL
STAR
SVT1
SVT2
SW3
TCC
RTL2
RTL4
CH5
RTL5
CHLD
CINE
CLUB
CMT
CNN
CSUR
DISC
DR
RTP
CINEMA
TELECLUB
CMT
SCHWEIZ4
SAT1
SBS
CNN
SHOW
SOCIEDADE
SKY CHANNEL
SKY NEWS
SPORT
SUPER RTL
STAR-TV
SVT1
ANDALUCIA
DISCOVERY
DR TV
DRS
DSF
DRS
DSF
ETB1
ETB2
EURO
EUSP
FEMM
FILM
FNET
FR2
ETB1
ETB2
EURONEWS
EUROSPORTS
FEMMAN
FILM
SVT2
SUEDWEST3
TCC
TELE
TEL5
TF1
TELE
FILMNET
France2
France3
GALAVISION
HESSEN3
INFO-KANAL
ITALIA1
ITALIA7
ITV
TELE5
TF1
FR3
TM3
TMC
TNT
TM3
GALA
HR3
TELEMONTECARLO
TNT INT
TRT INT
TSI
INFO
ITA1
TRT
TSI
ITA7
TSR
TSR
ITV
TV1
BRTN TV1
BRTN TV2
TV3
JSTV
JSTV
KA2
TV2
KA2
TV3
KAB1
KAN2
LOCA
M6
KABEL1
KANAL2
LOCAL
M6
TV4
TV4
TV5
TV5
TV6
TV6
TVE1
TVE2
TVG
TVI
TVE1
MBC
MCM
MDR
MOVE
MTV
MTV3
N3
N-TV
NBC
NDR3
NED1
NED2
NED3
NEWS
NICK
NRK
MBR
TVE2
MCM
TV GALICIA
TV INDEPENDENT
TV NORGE
VIDEO
VERONICA
VH-1
MDR
MOVIE
MTV
TVN
VCR
VERO
VH-1
VIVA
VIV2
VMTV
VOX
VT4
MTV3
NORD3
N-TV
VIVA
VIVA2
NBC SUPER
NDR3
VIDEO MUSIC
VOX
NED1
NED2
VT4
NED3
VTM
WDR1
WDR3
YLE1
YLE2
ZDF
VTM
West1
NICKELODEON
NRK
NRK2
ODEON
ORF1
West3
YLE1
NRK2
ODE
ORF1
YLE2
ZDF
ZTV
ZTV
* The "ID" abbreviation is what is shown on-screen in lieu of the
station name. The "ID" abbreviation is listed in the Channel
List screen and is displayed on the TV screen when the
recorder is tuned to a different station.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS AND ANSWERS
EN
39
PLAYBACK
RECORDING
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the beginning.
Q. When I pause and then resume a recording, the end
of the recording before the pause is overlapped by
the beginning of the continuation of recording. Why
does this happen?
A. This is normal. It reduces distortion at the pause and
resume points.
Q. Can the video recorder indefinitely remain in the
still mode?
A. No. It stops automatically after 5 minutes to protect
the heads.
Q. Can the video recorder indefinitely remain in the
Record-Pause mode?
A. No. The video recorder goes to its Stop mode auto-
matically after 5 minutes to protect the heads.
Q. During search, slow, still and frame-by-frame
playback, I can’t hear any audio. What’s the
problem?
A. This is normal.
Q. What happens if the tape runs out during recording?
A. The video recorder automatically rewinds it to the
beginning.
Q. When returning from multi-speed search to normal
playback, the picture is disturbed. Should I be
concerned about this?
TIMER RECORDING
A. No, it is normal.
Q. " " and "‰" remain lit on the display panel. Is there
a problem?
Q. Noise bars appear during multi-speed search. What’s
the problem?
A. This is normal.
A. No. This is a normal condition for a timer recording in
progress.
Q. Can I program the timer while I’m watching a tape
or a TV broadcast?
A. You won’t see the picture as it is replaced by the on-
screen menu, but the audio from the program or tape
you’re viewing can be heard.
Q. Other than preventing further recording, what effect
does removing the Record Safety tab have?
A. It disables marking of index codes.
Q. Sometimes, during Index Search, the video recorder
can’t find the programme I want to see. Why not?
A. There may be index codes too close together.
Q. Is it possible to timer-record a TV programme
broadcast in 2000?
A. Yes, it is possible.
ATTENTION:
This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases,
switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette.
After checking the cassette, operate the unit as usual.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
40
EN
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily
corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
SYMPTOM
1. No power is applied to the
POSSIBLE CAUSE
● The mains power cord is discon-
CORRECTIVE ACTION
Connect the mains power cord.
recorder.
nected.
2. The clock is functioning properly,
but the recorder cannot be
powered.
● “‰“ is displayed on the display
panel with Auto Timer set to "OFF".
Press the TIMER button to turn the
“‰“ indicator off.
3. The remote control won’t function.
● The batteries are discharged.
● The remote control is set to the
wrong operating mode.
Replace the dead batteries with new ones.
Press the appropriate button (TV or
VCR) depending on the unit you want
to operate. (੬ pg. 29)
TAPE TRANSPORT
SYMPTOM
1. The tape does not run during
recording.
POSSIBLE CAUSE
CORRECTIVE ACTION
● “ “ is displayed on the display
Press PLAY to turn the “ “ indicator
panel.
off.
2. The tape will not rewind or fast-
forward.
● The tape is already fully rewound or
fast-forwarded.
Check the cassette.
PLAYBACK
SYMPTOM
1. The playback picture does not
appear while the tape is running.
POSSIBLE CAUSE
● If you’re using the RF OUT connec-
tion . . .
CORRECTIVE ACTION
If you are using the RF OUT connec-
tion . . .
. . . the TV receiver’s channel selector
is not set to the VIDEO channel.
. . . the recorder's VIDEO channel
has not been correctly set.
● If you’re using the AV connection, the
TV receiver is not set to the AV mode.
. . . set the TV receiver to the VIDEO
channel. (੬ pg. 4)
. . . Perform "Video Channel Set"
(੬ pg. 4)
If you are using the AV connection,
set the TV to its AV mode.
2. Noise appears during visual
search.
● This is normal.
3. Noise appears during normal
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 14)
4. Noise appears during slow-motion
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 14)
5. Noise appears during still
playback.
Press TV PROG + or – a few times to
remove the noise bars from the screen.
6. The playback picture is blurred or
interrupted while TV broadcasts
are clear.
● The video heads may be dirty.
Consult your JVC dealer.
7. No sound accompanies the
playback picture.
● The TV system you have selected at
the TV System Select screen is
incorrect.
Set it to the correct position for the TV
broadcast system used in your area.
(੬ pg. 37.)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
RECORDING
SYMPTOM
1. Recording cannot be started.
POSSIBLE CAUSE
● There is no cassette loaded, or the
cassette loaded has had its Record
Safety tab removed.
CORRECTIVE ACTION
Insert a cassette, or using adhesive
tape, reseal the slot where the tab
was removed.
2. TV broadcasts cannot be recorded.
3. Tape-to-tape editing is not possible.
● “F-1” has been selected as the input
Set to the desired channel.
mode.
● The source (another video recorder,
camcorder) has not been properly
connected.
● All necessary power switches have
not been turned on.
● The input mode is not correct.
Confirm that the source is properly
connected.
Confirm that all units’ power switches
are turned on.
Set the input mode to “F-1”.
● The camcorder has not been
properly connected.
● The input mode is not correct.
Confirm that the camcorder is
properly connected.
Set the input mode to “F-1”.
4. Camcorder recording is not
possible.
TIMER RECORDING
SYMPTOM
1. Timer recording won’t work.
POSSIBLE CAUSE
CORRECTIVE ACTION
● The clock and/or the timer have
been set incorrectly.
Re-perform the clock and/or timer
settings.
● The timer is not engaged.
Press TIMER and confirm that “‰“ is
displayed on the display panel.
2. On-screen timer programming is
not possible.
● Timer recording is in progress.
Timer programming can’t be
performed while a timer recording is
in progress. Wait until it finishes.
● The timer is engaged but there’s no
cassette loaded.
3. “‰“ and “]“ on the display
Load a cassette with the Record
Safety tab intact, or cover the hole
using adhesive tape.
panel won’t stop blinking.
● The loaded cassette has had its
Record Safety tab removed.
4. The cassette is automatically
ejected, and “‰“ and “]“ on the
display panel won’t stop blinking.
Remove the cassette and cover the
hole with adhesive tape, or insert a
cassette with the Record Safety tab
intact.
5. “‰“ blinks for 10 seconds and the
● TIMER has been pressed when there
are no programs in memory, or the
timer record information has been
programmed incorrectly.
Check the programmed data and re-
program as necessary, then press
TIMER again.
Timer mode is disengaged.
6. The cassette is automatically
ejected, the power shuts off and
“‰“ and “]“ won’t stop
blinking.
● The end of the tape was reached
during timer recording.
The programme may not have been
recorded in its entirety. Next time
make sure you have enough time on
the tape to record the entire
programme.
● The recorder’s channel positions
have been set incorrectly.
Refer to "Guide Program Number Set"
and re-perform the procedure
(੬ pg. 20).
7. SHOWVIEW does not timer-record
properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (cont.)
42
EN
OTHER PROBLEMS
SYMPTOM
1. Whistling or howling is heard from
the TV during camcorder record-
ing.
POSSIBLE CAUSE
CORRECTIVE ACTION
Position the camcorder so its
microphone is away from the TV.
Turn the TV’s volume down.
● The camcorder’s microphone is too
close to the TV.
● The TV’s volume is too high.
2. When scanning channels, some of
them are skipped over.
● Those channels have been desig-
nated to be skipped.
If you need the skipped channels,
restore them (੬ pg. 34).
3. The channel cannot be changed.
● Recording is in progress.
Press PAUSE to pause the recording,
change channels, then press PLAY to
resume recording.
4. Channel settings that were made
manually seem to have changed or
disappeared.
● After the manual settings were
made, Auto Channel Set was
performed.
Perform manual setting again.
5. No channels are stored in the
recorder's memory.
● The TV aerial cable was not
connected to the recorder when
Auto Set Up was performed..
Connect the TV aerial cable to the
recorder properly and turn off the
recorder power once, then turn the
recorder power back on again. The
recorder will try Auto Set Up again
(੬ pg. 6).
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
43
FRONT VIEW
1
2
3
4 5 6
STANDBY/ON
DISPLAY
SP/LP
VIDEO
AUDIO
REVIEW
TV PROG
REC LINK
SP
VPS/PDC
7
8
9 0
!
@
#
$
%
^
1 STANDBY/ON
Button ੬ pg. 5
9 REC LINK Button ੬ pg. 28
0 REC LINK Indicator ੬ pg. 28
! Display Panel ੬ pg. 44
@ Infrared Beam Receiving Window
# TV PROG +/– Buttons ੬ pg. 16
$ RECORD Button ੬ pg. 16
% STOP/EJECT Button ੬ pg. 12
^ PAUSE Button ੬ pg. 13
2 Cassette Loading Slot
3 DISPLAY Button ੬ pg. 17
4 Rewind [REW] Button ੬ pg. 12, 13
5 PLAY Button ੬ pg. 12
6 Fast Forward Button ੬ pg. 12, 13
7 VIDEO/AUDIO Input Connectors ੬ pg. 31
8 SP/LP Button ੬ pg. 16 (HR-J459EE)
COUNTER RESET Button ੬ pg. 17 (HR-J259EE)
REAR VIEW
2 3
1
ANT. IN
OUT
AUDIO
VIDEO
RF OUT
4
1 Mains Power Cord ੬ pg. 3
2 AUDIO/VIDEO OUT Connectors ੬ pg. 3, 30
3 ANT. IN Connector ੬ pg. 3
4 RF OUT Connector ੬ pg. 3
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX (cont.)
44
EN
DISPLAY PANEL
1
2
3
4 5
6
7
8
REVIEW
SP
VPS/PDC
9
0
!
@
1 B.E.S.T. Picture System Display ੬ pg. 19
3 Tape Speed Indicators ੬ pg. 16
4 Programme Time Indicators ੬ pg. 24
5 "Timer" Indicator ੬ pg. 23
6 Tape Remaining Time Indicator ੬ pg. 17
7 Channel Display
2 Symbolic Mode Indicators
STILL:
SLOW:
PLAY:
VARIABLE
RECORD:
Clock Display
SHUTTLE SEARCH:
8 Instant REVIEW Indicator ੬ pg. 15
9 VPS Indicator ੬ pg. 23, 25
* PDC (Programme Delivery Control) recording is not
possible with this recorder.
RECORD PAUSE:
0 "Cassette Loaded" Mark
! Counter/Remain Display
@ Mode Display (F-1)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
1 TV Button ੬ pg. 29
2 VCR Button ੬ pg. 29
REMOTE CONTROL
3 TV/VCR Button ੬ pg. 29
4 REVIEW Button ੬ pg. 15
5 NUMBER Keys ੬ pg. 16
6 CANCEL Button ੬ pg. 22
Counter [C.] RESET Button ੬ pg. 17
7 STOP +/– Button ੬ pg. 23
8 START +/– Button ੬ pg. 24
9 PROG. Button ੬ pg. 22
0 PROG. CHECK Button ੬ pg. 26
! Rewind [REW] Button ੬ pg. 12
@ Record Button ੬ pg. 16
# Stop Button ੬ pg. 12
^
&
1
2
VCR
TV
3
4
TV/VCR
AUDIO
DISPLAY
*
(
)
q
w
e
r
t
y
u
i
o
p
(MONITOR)
1
4
2
3
2
5
6
5
DAILY
WEEKLY
7
C. RESET
8
9
AUX
6
7
CANCEL
TIMER
4
0
$ MENU Button ੬ pg. 7
START
STOP
DATE
TV
PROG
% PUSH JOG %fi Button ੬ pg.6
8
TV PROG +/– ੬ pg. 29
EXPRESS PROGRAMMING
^ STANDBY/ON
Button ੬ pg. 5
9
0
!
@
#
$
%
PROG.
CHECK
30 SEC
PROG.
1
&
(TV Muting) Button ੬ pg. 29
* DISPLAY Button ੬ pg. 17
( DAILY Button ੬ pg. 23
) WEEKLY Button ੬ pg. 23
q AUX Button ੬ pg. 31
R
w TIMER Button ੬ pg. 23
e DATE +/– Button ੬ pg. 24
r TV PROG +/– Button ੬ pg. 16, 25
t 30 SEC Button ੬ pg. 15
y Tracking Button ੬ pg. 14
SP/LP Button ੬ pg. 16
PUSH JOG
V
V
L
Q
R
G
u Play Button ੬ pg. 12
i Fast Forward [FF] Button ੬ pg. 12
o Pause Button ੬ pg. 13
p OK Button ੬ pg. 5
MULTI BRAND
REMOTE CONTROL UNIT
Q PUSH JOG
Button ੬ pg. 13, 15
TV VOL +/–Button ੬ pg. 29
Buttons with a small dot on the left side of the name can also
be used to operate your TV ੬ pg 29.
How To Use
NOTES:
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets of JVC and other
brands. ੬ pg. 29.
● When inserting the batteries, be sure to insert in the correct
directions as indicated under the battery cover.
● If the remote control doesn't work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control is
about 8 m.
ATTENTION
The remote control can operate not only the video recorder but also some of your TV's functions.
● To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the remote control to the TV mode (੬ pg. 29).
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
46
EN
GENERAL
TUNER/TIMER
Power requirement
Rating
TV channel storage
capacity
: AC 110 – 240 V`, 50/60 Hz
: AC 90 – 260 V`, 50/60 Hz
: 18W
: 99 positions
Operating
(+AUX position)
Power consumption
Temperature
Operating
Storage
Operating position
Dimensions (WxHxD) : 400 x 94 x 277 mm
Weight
Format
Tuning system
Channel coverage
: Frequency synthesized tuner
: VHF 47 – 100/104 – 300/
302 – 470MHz
: 5°C to 40°C
: –20°C to 60°C
: Horizontal only
UHF 470 – 862MHz
: UHF channels (Adjustable
E28 – E60)
Aerial output
: 3.4 kg
: VHS standard
Memory backup time
: Approx. 18 hours
Backup time becomes shorter as the unit's internal parts
become old. When this occurs, please consult your
nearby JVC dealer.
Maximum recording time
(SP)
: 240 min. with E-240 video
cassette
(LP) [J459EE only] : 480 min. with E-240 video
cassette
ACCESSORIES
Provided accessories
: RF cable,
Infrared remote control unit,
"R6/UM-3" battery x 2
VIDEO/AUDIO
Signal system
: PAL-type colour signal and
CCIR monochrome
signal,625 lines 50 fields
: NTSC colour and EIA
monochrome signals, 525
lines/60 fields
: DA-4 (Double Azimuth)
head helical scan system
[J459EE]
Specifications shown are for SP mode unless otherwise
specified.
Design and specifications subject to change without notice.
Recording system
: Rotary two-head helical scan
system [J259EE]
Signal-to-noise ratio
Horizontal resolution
Frequency range
Input/Output
: 45 dB
: 250 lines
: 70 Hz to 10,000 Hz
: RCA connectors
(IN x 1, OUT x 1)
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Malaysia
0798YIV*UN*PJ
EE
COPYRIGHT © 1998 VICTOR COMPANY OF JAPAN, LTD.
Download from Www.Somanuals.com. All Manuals Search And Download.
|