JLIP VIDEO CAPTURE DOCKING STATION
ENGLISH
GV-DS1
INSTRUCTIONS
LYT0002-0H6B
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
EN
Dear Customer,
Thank you for purchasing this VIDEO CAPTURE
DOCKING STATION. Before use, please read
the safety information and precautions
contained in the following pages to ensure safe
use of this product.
SAFETY
PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
Using This Instruction Manual
•All major sections and subsections are listed in
the Table Of Contents (੬ pg. 5 – 7).
•Notes appear after most subsections. Be sure to
read these as well.
•Basic and advanced features/operation are
separated for easier reference.
It is recommended that you . . .
..... refer to "Controls and Connectors" (੬ pg. 11)
and familiarize yourself with connector
locations before use.
CAUTIONS:
Ⅲ To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
..... read thoroughly the Safety Precautions and
Safety Instructions that follow. They contain
extremely important information regarding the
safe use of your new VIDEO CAPTURE
DOCKING STATION.
Ⅲ When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.
NOTES:
●The rating plate (serial number plate) and
safety caution are on the bottom of the
VIDEO CAPTURE DOCKING STATION.
●The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.
This unit is produced to comply with Standard
IEC Publ. 65.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
3
If you notice smoke or a peculiar smell coming from the VIDEO CAPTURE
DOCKING STATION unplug it IMMEDIATELY. Use of the VIDEO CAPTURE
DOCKING STATION under these conditions could lead to fire or electric shock.
Contact your JVC dealer. DO NOT attempt to repair the malfunction yourself.
DO NOT attempt to insert foreign objects into the connectors, as this can lead
to electric shock or fire. If an object is accidentally inserted, unplug it and
contact your JVC dealer. Be especially careful with children.
If during use you notice that the VIDEO CAPTURE DOCKING STATION is
damaged, unplug it and contact your JVC dealer. Use of the VIDEO CAPTURE
DOCKING STATION under these conditions can lead to fire or electric shock.
DO NOT attempt to repair or modify the VIDEO CAPTURE DOCKING
STATION. Doing so may result in malfunctions or injury. If a problem occurs,
contact your JVC dealer.
Failure to heed the following precautions may result in damage to the VIDEO
CAPTURE DOCKING STATION.
1. DO NOT place the VIDEO CAPTURE DOCKING STATION . . .
.... in an environment prone to extreme temperatures or humidity.
.... in direct sunlight.
.... in a dusty environment.
.... in an environment where strong magnetic fields are generated.
.... on a surface that is unstable or subject to vibration. The unit may fall, causing injury.
2. DO NOT place heavy objects on the VIDEO CAPTURE DOCKING STATION.
3. DO NOT place anything which might spill on top of the VIDEO CAPTURE DOCKING
STATION.
4. AVOID violent shocks to the VIDEO CAPTURE DOCKING STATION during transport.
5. DO NOT leave the VIDEO CAPTURE DOCKING STATION plugged in when the unit is not
in use.
6. DO NOT use accessories other than those designated in the instructions. Use of others can
lead to fire or electric shock.
7. DO NOT connect devices to the VIDEO CAPTURE DOCKING STATION other than those
designated in the instructions. Use of others can lead to malfunctions.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS (cont.)
4
EN
How to handle a CD-ROM
● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not
write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward from the center hole using a circular motion.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct
sunlight.
MAINTENANCE
If the inside of the VIDEO CAPTURE DOCKING STATION is left dusty for a long time, its use
can lead to fire or malfunction. Consult your JVC dealer on cleaning.
AC Power Adapter/Charger
● DO NOT remove the cover and attempt to repair or modify the AC Power Adapter/Charger.
Doing so may result in malfuncitons or electrical shock and injury. If a problem occurs,
contact your JVC dealer.
● Make sure the Power Cord is securely connected to the AC Power Adapter/Charger.
● When using the AC Power Adapter/Charger, use only the supplied Power Cord. Use of any
other cord may result in shock or fire.
● Connect the Power Cord to the AC Power Adapter/Charger before connecting it to an AC
outlet. If you plug it into an outlet first, and the Adapter’s terminals come in contact with a
metal surface or object, short circuit or fire may result.
● Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/
Charger. This is normal.
● The AC Power Adapter/Charger processes electricity internally, and will become warm
during use. This is normal. Make sure to use the AC Power Adapter/Charger in well-
ventilated areas only.
CAUTION:
Changes or modifications not approved by JVC could void user’s authority to operate the
equipment.
● The Readme.TXT file provides additional information for setup and information that is not
included in the instruction manual. Please read the file before installing the provided
software program.
● You can find the latest information (in English) on the provided software program at our
www server.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
EN
5
8
MAJOR FEATURES
CONTROLS AND CONNECTORS
CONNECTIONS (When Using JLIP Video Capture Software) 12
10
INTRODUCTION
14
15
16
INSTALLATION (JLIP Video Capture Software)
OPEN & CLOSE (Basic Operation Procedure)
Preparation ....................................................................... 16
How to close the program ......................................................17
INITIALIZATION
18
Initializing JLIP .................................................................. 18
Select units........................................................................ 19
HOW THE DESKTOP WORKS
20
Main desktop window...........................................................20
Menu bar ..........................................................................21
Each pulldown menu is configured as follows ................................ 22
VIDEO CAPTURE
24
Capturing video images ......................................................... 24
Step by step capture............................................................. 25
Automatic capture................................................................26
Program capture .................................................................26
Interval capture .................................................................. 28
PICTURE FORMAT SETTING
29
Selecting a picture format .......................................................29
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS (cont.)
6
EN
ADDITIONAL OPERATIONS
30
Counter value change ............................................................ 30
Counter reset .....................................................................30
Delete index image and full image............................................. 31
Change ID ......................................................................... 31
SAVE PICTURE
32
Create new folder ................................................................32
Saving ............................................................................. 32
Open index........................................................................ 33
Save the full image data ........................................................ 33
JLIP PLAYER SOFTWARE
34
Using JLIP player software data............................................... 34
How to store JLIP player software data ..................................... 35
TROUBLESHOOTING
36
38
41
42
LIST OF ERROR MESSAGES
JLIP PLAYER SOFTWARE SECTION
CONNECTIONS (When Using JLIP Player Software)
When connecting to a video source unit with JLIP connector or to a
video printer.................................................................... 42
GETTING STARTED
44
45
46
48
50
56
INSTALLING (JLIP Player Software)
STARTING JLIP PLAYER SOFTWARE
MOVIE PLAYER WINDOW BUTTONS AND DISPLAYS
BASIC OPERATIONS
VIDEO PRINTER WINDOW BUTTONS AND DISPLAYS
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
VIDEO PRINTER OPERATION (GV-PT2)
58
Printing ............................................................................ 58
Auto capture ...................................................................... 60
ADVANCED OPERATIONS
62
Changing ID number ............................................................. 62
Connecting other device during operation..................................... 62
Changing the name of the device............................................... 63
Changing the device to use while connecting over
two same type devices ....................................................... 63
Adjusting the gap between the stored edit-start point in the
computer and the dubbed one in the recording deck ...................... 64
TROUBLESHOOTING
MAJOR SPECIFICATIONS
INDEX
65
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR FEATURES
8
EN
Advanced Applications
Create title indexes for your video
collection
Title index images can be captured from your
favorite recordings in intervals of 30 minutes,
1 hour, 1.5 hours, etc. using the Interval
Capture mode. Print the captured index
images on your PC printer using the compu-
ter's Print Screen facility, then attach them to
your cassettes.
Business presentations
Images captured from video can be incorpo-
rated into business documents to spice up
your presentations.
Internet homepage
Images captured from video can be incorpo-
rated in your Internet homepage using image
editing software.
Video journal and postcards
Create your own original postcards, party
invitation cards and the like or keep a video
journal.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
Two software programs are provided with the GV-DS1 JLIP package.
JLIP Player Software
JLIP Video Capture Software
(੬ pg. 41 – 65)
(੬ pg. 12 – 39)
JLIP Control Facility
With a JLIP-compatible camcorder, VCR or
video printer (GV-PT2):
JLIP Video Capture Software
This is the software described in this manual.
• all basic video operations can be
executed on the computer display;
• allows programmed video playback (up
to 99 programs) or assemble editing
• print command can be issued to the GV-
PT2 video printer
Video Capture Facility
Video images from video source units such as
camcorders or VCRs can be captured as 768
x 552 still images with 16.77 million colors
through the serial port (RS-232C) of a
Windowsா-operated computer.
Data Sharing with the Video Capture
Software
JLIP Control Facility
With a JLIP compatible camcorder or VCR,
• all basic video operations can be
executed via the computer display;
• Up to 99 images can be captured
automatically with Program Video
Capture (playing tape — scanning —
transferring to PC)
Video Capture Software data can be exported
to the Player Software.
Assemble Editing
Selected scenes on a pre-recorded tape can
be edited in a specified sequence.
Data Sharing With JLIP Player Soft-
ware
Data can be imported from the JLIP Player
Software.
Data from the Video Capture Software can
also be exported to the Player Software for
Program Playback or Assemble Editing.
Pre-recorded tape
(on camcorder)
Recording tape
(on VCR)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTORS
The controls and connectors marked can be used only when the GR-DVM1 or GR-DVM801
Digital Camcorder is attached. For details of its operation, read the camcorder instruction
manual.
10
EN
*
* STOP button
* PLAY button
* PAUSE button
* EDIT button
* Rewind (REW) button
* Fast-Forward (FF) button
* Lock lever
* RELEASE button
* DIGITAL jack ੬ p. 13
•Connect to the computer’s
RS-232C terminal (COM
port).
JLIP jack ੬ p. 13
* Multi connector
(joint Level Interface Protocol)
•Connect to a JLIP-compatible
comcorder or VCR to control it
from the computer.
•The Docking Station can be connected with
the GR-DVM1 or GR-DVM801 through this
connector. Never touch it with your hand or
hit it with a hard object; if the pins are
damaged, the connectors will become
unusable due to contact failure.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
* DC output jack
•For dealer use.
* S-Video output jack
•Outputs S-Video signal. (Also
compatible with S1 and S2
connectors.)
DC input jack ੬ p. 13
* Video output jack
* Remote control sensor
•Receives the remote
control signals for the
attached Camcorder.
* Audio output jack [L]
* Audio output jack [R]
* EDIT jack
CAPTURE INPUT (EXT.)/PRINTER connector
੬ p. 13
•Connect with the video output (stored image output) of the optional video printer. Even
when a TV is not connected to the video printer, this connection allows you to see the
images output from the video printer on the LCD screen while printing.
•The date and timecode are not shown on the LCD screen. If you want to print out the date
together with the images, connect a TV to the video output connector of the video printer
and operate it by referring to the TV screen.
•It is also possible to capture images from video equipment other than the GR-DVM1 or
GR-DVM801 by connecting the equipment to this connector. To make this operation
possible, also attach the GR-DVM1 or GR-DVM801 and set its power switch to record
mode without loading a tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS (When Using JLIP Video Capture Software)
Ⅲ To assure safety, make sure all units are turned off before making any connections.
Ⅲ The video images will be displayed on the LCD screen of the attached GR-DVM1 or GR-
DVM801. You cannot view the images on the computer screen.
12
EN
Ⅲ When connecting the provided cables, be sure to connect the terminals equipped with Core
filters to the Video Capture Docking Station.
Ⅲ When using the Video Capture Docking Station, use the AA-V80EG AC Adapter/Charger
(optional or provided with the camcorder).
To Digital (8-pin)
connector
Core filter
PC connection cable
(provided)
To COM
(RS-232C) port
Personal computer
Image sources with JLIP and video output connectors
VCR (Recording deck)
(red) (white) (yellow)
To JLIP jack
To VIDEO output jack
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Digital
Camcorder
AC Adapter/Charger
Video Capture
Docking Station
To DC
output
jack
JLIP
DC cable (provided)
Core filter
To JLIP
jack
Core
filter
(red) (white) (yellow)
To CAPTURE
INPUT
(EXT.)/
PRINTER
connector
Core filter
3.5 mm diameter 4-pole
cables (provided)
Other units
with video
output jack
AUDIO/VIDEO cable
(provided)
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
14
EN
What is video capture software ?
Video capture software is a type of application program that allows you to capture video
images from camcorders and VCRs and store them in personal computers running under the
Windowsா operating system. These images can be transferred from the video source to the
computer via a standard RS-232C communication interface. By processing the captured
images with commercially available image editing software, you can create your own unique
and highly personal illustrations and graphics for incorporation into everything from postcards
to newsletters and Internet homepages. What’s more, you can also use your computer to edit
your original video recording and produce a fun-to-watch, professional-looking video pro-
gram.
What is JLIP ?
JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows AV
units equipped with a JLIP terminal to be controlled by a personal computer.
*
is a registered trademark of JVC.
Operating Environment
● Personal computer with Microsoftா Windowsா 3.1 or Windowsா 95
● CPU Intel DX4™ or higher processor
● Minimum RAM requirement: more than 8 MB
● Available Hard Disk space of at least 8 MB
● Colour display capable of at least 640 x 480 pixels, 256 colours
Recommended 1024 x 768, 16.77 Mil colours
● 1 free serial transmission port, compatible with 9600 bps transmission rate, connectable to
RS-232C with 9 pin serial connector.
Recommended compatible with UART 16550A
● Mouse (Windowsா compatible)
● CD-ROM drive
Note : An optional 9 pin serial conversion adapter is required for computers using serial
communication port other than standard 9 pin.
* Microsoftா and Windowsா are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
* Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
Connectable Devices
When using JLIP with Video units equipped with a JLIP connector :
● Camcorders GR-DV1, GR-DVJ70, GR-DVM1, GR-DVM801 etc (A junction box with a JLIP
terminal is required for connection to GR-DV1, GR-DVJ70, GR-DVM1 and GR-DVM801)
When not using JLIP:
● Video units with video output connectors
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION (JLIP Video Capture Software)
EN
15
WINDOWSா 95
WINDOWSா 3.1
Refer to the Windowsா 95 manual or your
computer’s manual for details on basic
Windowsா 95 operating procedures.
Refer to the Windowsா 3.1 manual of or your
computer manual for details on basic
Windowsா 3.1 operating procedures.
Installation Procedure
Installation Procedure
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
*To start the setup program...
*To start the setup program...
Launch Windowsா 95
Launch Windowsா 3.1
1 •Close any other applications that are 1 •Close any other applications that are
running.
running.
Insert the "JLIP Video Capture" CD-ROM
Insert the "JLIP Video Capture" CD-ROM
2 into the CD-ROM drive.
3
2 into the CD-ROM drive.
Choose "Run" from "Start" on the taskbar.
Choose "Run" from "File" in the "Program
3 Manager".
If you want English on-screen mes-
4 sages…
If you want English on-screen mes-
4 sages…
If the "JLIP Video Capture" CD-ROM is in
Drive D, type "D:\JCPTE\SETUP" in the
box to the right of "Name". If the disk is
in Drive E, type "E:\JCPTE\SETUP".
If the "JLIP Video Capture" CD-ROM is in
Drive D, type "D:\JCPTE\SETUP" in the
box to the right of "Name". If the disk is
in Drive E, type "E:\JCPTE\SETUP".
If you want French on-screen mes-
sages…
If the "JLIP Video Capture" CD-ROM is in
Drive D, type "D:\JCPTF\SETUP" in the
box to the right of "Name". If the disk is
in Drive E, type "E:\JCPTF\SETUP".
If you want French on-screen mes-
sages…
If the "JLIP Video Capture" CD-ROM is in
Drive D, type "D:\JCPTF\SETUP" in the
box to the right of "Name". If the disk is
in Drive E, type "E:\JCPTF\SETUP".
•Click "OK".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "JLIP
Video Capture" icon appears on the
screen.
•"JLIP Video Capture Setup was com-
pleted successfully." appears.
•When setup is complete, the "JLIP
Video Capture" icon appears on the
screen.
•"JLIP Video Capture Setup was com-
pleted successfully." appears.
Click "OK" to complete installation.
Click "OK" to complete installation.
5
5
NOTE : This instruction manual uses
English on-screen messages in its
explanation.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN & CLOSE (Basic Operation Procedure)
The Video Capture software can be started up in the same way as any other program running
under Windows. The procedure differs slightly depending on whether you’re using Windowsா
3.1 or Windowsா 95.
16
EN
Preparation
• Turn on your computer.
• Turn on the video source units (such as camcorders and VCRs).
• If you want to capture a still picture from a recorded tape, load the tape into the video unit.
• If you want to capture an image from the data stored in the JLIP Player Software, be sure to
load the disk on which the image is stored.
Close any programs that are running. You cannot run other programs simultaneously with
the Video Capture software.
With Windowsா 3.1, open the group of application icons in the Program Manager and
double-click the application icon you want to launch.
With Windowsா 95, click the [START] button on the taskbar, and the Program menu
appears on the screen. Move the mouse pointer over the program entry you want to run
and click to start the program.
Now let’s start the program.
If you’re using Windowsா 3.1, open the JLIP Video Capture group in the "Program Manager" and
double-click the JLIP Video Capture icon.
If you’re using Windowsா 95, select JLIP Video Capture from the "Start menu" and click to start.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
HOW TO CLOSE THE PROGRAM
Double-click the control menu button in Windowsா 3.1 or click "Exit" in the "File (F)" menu.
In Windowsா 95, simply click the Close button.
If you try to close the program with no image
data saved, the message "The album has not
been saved. Save?" appears. Please note that
if you close without saving, all unsaved
captured data will be deleted.
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Ctrl+S
Ctrl+A
Save Image As…
Exit
Click "Exit" from "File" in the menu bar.
1
•The program closes.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIALIZATION
18
EN
INITIALIZING JLIP
The first time you start the Video Capture software, JLIP initialization is required. This sets which
of the computer’s COM ports (connector into which the RS-232C cable is plugged) is connected
to the GV-DS1 JLIP Video Capture Docking Station. The initialization window automatically
appears the first time you start the software after installation. Do not forget to carry out this JLIP
initialization procedure. The JLIP must be initialized again whenever you connect a new image
source or other unit to the JLIP Video Capture Docking Station.
1. Start the JLIP Video Capture software.
2. The "JLIP Initialization" screen automatically appears.
3. Select "COM Port".
•COM1 through COM4 ports are available. Check to see which COM port is connected to
the JLIP Video Capture Docking Station and select it.
4. Select "Transfer Rate".
•Normally select 38400.
•38400 may not be available on some computers. When transmission errors take place
during use, switch to 19200 or 9600. Image data transmission will be slower at these
speeds.
5. Click "OK" . Call up the "JLIP Initialization" window and check the connected units.
JLIP Initialization
COM Port COM 1
OK
Transfer Rate 38400
Cancel
NOTE : If you want to change a unit or COM port or Transfer Rate, select "Initialize" from
"Set-up" in the menu bar to call up the "JLIP Initialization" window. Repeat this setting
procedure.
If a connection is incorrect, a connected unit is not turned on, or the connection ID numbers
overlap, the message "Connection error" appears. Click "OK" to return to the Main desktop.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
SELECT UNITS
6. Call up the "Device Selection" window.
7. Click the name of the unit required.
•The word "VCRCAMERA" appears in the VCR box to indicate the Video source unit is now
in use.
•The word "MODULE" appears in the Video Capture box to indicate the Video Capture
Docking Station is now in use.
•Only one VCR and one Video Capture device can be selected.
8. Click "OK".
•The main desktop window returns (setting complete).
Device Selection
VCR
Not connected
OK
06:VCRCAMERA
Cancel
Video Capture
Not connected
83:MODULE
NOTE : The "Device Selection" window automatically appears when JLIP initialization is
complete. However, if you want to select equipment whose JLIP initialization has
already been carried out, select "Device Change" from "Set-up" in the menu bar to
call up the "Device Selection" window.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW THE DESKTOP WORKS
20
EN
MAIN DESKTOP WINDOW
1.
Menu bar
2.
Control
buttons
3.
Image display area
JLIP Video Capture [–Untitled Folder–] (Untitled)
File Edit Set-up Window Help
Close
button
CAPTURE
01
TRANSFER
02
INPUT
MEMORY
JLIP
03
04
05
00:01:23:12 00:02:17:21 00:07:01:19 00:37:05:06 00:20:39:18
06 07 08
00:39:03:11 00:47:53:03 --:--:--:--
Menu bar
1
2
Displays function menus. See the next page for detailed information.
Control buttons
•CAPTURE button (੬ page 25)
Press to CAPTURE a desired image from an image source. When pressed, an index
image appears under this button.
•TRANSFER button (੬ pages 27 through 28)
The TRANSFER button is used to start Automatic Transfer. Automatic Transfer is divided
into Program Capture and Interval Capture.
•MEMORY/INPUT button
Press to switch between the image stored in this unit and the image from the video
source.
•JLIP button (੬ pages 41 through 65)
The JLIP Video Capture software and JLIP Player software cannot run simultaneously.
When you want to run the JLIP Player software, press this button to call up a cross bar
and run the software. To resume using the JLIP Video Capture software, first select "Close
Serial" from "File" on the JLIP Player Software's menu bar, then press the JLIP button.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
Image display area
3
Each time you press the Capture button an index image is captured into the image area.
Up to 99 images can be captured, with up to five images in one horizontal frame. Index
images are provided to allow you to confirm that you have captured the images you want.
Index image data: 80 x 60 pixels Full image data: 768 x 552 pixels
Image display box
Click to select an image display box, and
•the border turns green
•Double-click an image display box, and Full
image data will appear if it has already been
transferred
Index numbers are
automatically assigned
02
03
04
00:02:17:21 00:07:01:19 00:37:05:06
Colours of counter numerals
Hatched like this when
Counter display
Black : Full image data transferred counter time is corrected
Indicates the current tape position
eg. 00 : 12 : 17 : 21
Hour : Min : Sec : Frame
White: Full image data not
transferred (only index
image data transferred)
(੬ p. 30)
MENU BAR
All program functions can be selected from the menus in the menu bar. Click any item in the
menu bar to open the corresponding pulldown menu. Then click the desired command in the
pulldown menu. Some menu entries are invalid depending on the program status. Invalid
commands appear lighter than valid commands.
JLIP Video Capture
File Edit Set-up Window Help
New Album
Open Album
MEMORY
INPUT
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Ctrl+S
Ctrl+A
Save Image As…
Exit
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW THE DESKTOP WORKS (cont.)
Each pulldown menu is configured as follows
22
EN
File
New Album
Open Album
Erases the image currently on screen and creates a new image
Opens an index file (੬ p. 33).
Stores the index image on screen (੬ p. 32).
Opens a JLIP Player software file (੬ p. 34) .
Converts to and saves as a JLIP Player software file (੬ p. 35).
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Ctrl+S
Ctrl+A
Save Image As…
Exit
Saves the image data file to another folder or drive (੬ p. 33).
Closes the program (੬ p. 17).
•An index image of the image data in the Video Capture Docking
Station memory is transferred to your computer and displayed in
the selected image box (in the Step by Step capture mode).
•The video source unit scans the selected counter value and
transfers the index image to your computer (in the automatic
capture mode) (੬ p. 30).
•A full image of the image data in the Video Capture Docking
Station memory is transferred to your computer (in the Step by
Step capture mode).
Edit
Transfer the Index Image
Transfer the Full Image
Modify…
Delete
Del
•The video source unit scans the selected counter value and
transfers the full image data (768 x 552 pixels) to your computer
(in the automatic capture mode) (੬ p. 30).
Changes the scan timing in the automatic capture mode by chang-
ing the counter preset (੬ p. 30).
Deletes the index image (੬ p. 31).
Two different modes available: Step by Step Capture and Automatic Capture
(੬ p. 25, 26, 28).
Set-up
Selects image data format to be used in the transfer and capture mode
(੬ p. 29).
To initialize a connected unit or to change a connected unit (੬ p. 19).
Initialize when changing a COM port or transfer rate (੬ p. 18).
Changes the Video Capture unit’s ID number (੬ p. 31).
Resets the VCR's counter (੬ p. 30).
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
Window
Deletes space when an index image has been deleted (੬ p. 31).
The VCR operation window appears to allow the computer to operate
the VCR.
Arrange Index
VCR
[VCR] operation window
VCR POWER button
Counter display
VCR
I
00:01:23:12F
FF/FF Search
button
Reverse Slow button
Capture button
Capture
Transfer
Transfer button
Forward Slow
button
PAUSE
button
REW/REW Search
button
PLAY
button
STOP
button
VCR models operable on the VCR Operation Window (compatible with JLIP)
Help
Contents
F1
Display Help menu
About JLIP Video Capture
Display version information of this software.
NOTE : Counter reset
If you use a DV-format digital camcorder, counter information is represented by the
time code written on the tape. Counter reset is not possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CAPTURE
24
EN
CAPTURING VIDEO IMAGES
There are three capture modes available: Step by Step, Program and Interval. The latter two
modes are available only when connected to a JLIP compatible video source unit. Step by Step
Capture mode must be used to capture images from a video source unit with no JLIP connector.
Image data flow
Video signal
GV-DS1
(Image stored in video memory)
Video source
unit
Full image data
(with a resolution of 768 x 552
pixels)
Index image data
(with a resolution of
80 x 60 pixels)
2 types of video data
•Bitmap data Approx. 1.3MB
•JPEG video compression data
Approx. 50 kB
PC
(video data are stored on a hard disk or the like)
When storing full image data on a 2HD disk,
• An image saved in the bitmap data format can be stored on one disk.
• About 28 images saved in the JPEG video compression format can be stored on one disk.
This is the case when using floppy disks formatted for 1.44 MB.
NOTE:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image data (768
x 552 pixels) is displayed only after full
image data transfer is finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
STEP BY STEP CAPTURE
Use the Step by Step Capture mode when you want to:
•Capture images from a video source unit with no JLIP connector
•Capture images from video units with video output connectors
•Capture a smaller number of images
•Confirm the images being captured.
Preparation
•Make sure all units are properly connected
(੬ p. 12).
•Click "Image Format" in "Set-up" and select
the desired format (੬ p. 29).
Set-up
Step by Step
Automatic
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
Open the menu bar and click "Set-up" —
1 "Capture Mode" — "Step by Step".
•The Step by Step Mode is entered.
Click "CAPTURE" on the image you want
2 to capture.
•When a JLIP-compatible video source
unit is connected, click "Window" —
"VCR" to have the VCR scan the picture
in the VCR Operate window (੬ p. 23).
•When you press the CAPTURE button,
full image data (768 x 552 pixels) is
captured into the Video Capture
JLIP Video Capture
File Edit Set-up Window
CAPTURE
TRANSFER
Docking Station memory. Index image
data (80 x 60 pixels) is simultaneously
transferred to the computer.
Index image data is transferred to the
3 computer.
•The message "No.1 index image being
transferred" appears during data
transfer.
The message "Transfer the full image ?
4 Yes/No" appears. Click "Yes". Full image
data (768 x 552 pixels) is transferred to
the computer.
•You cannot use the TRANSFER button
in Step by Step Transfer mode.
NOTES:
•Index image /Full image data are
transferred to the image display boxes
bordered in green. Click and select the
desired box(es).
The full image data is transferred to the
5 computer.
•The message "No.1 full image being
transferred" appears during data
transfer.
•When transferring full image data using
the Bitmap image format ( .bmp), the
9
transfer takes a very long time, causing
the video source unit to stop playback
automatically.
Repeat steps 2 through 5 as required.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CAPTURE (cont.)
26
EN
AUTOMATIC CAPTURE
Automatic video capture is available only when a JLIP-compatible video source unit is con-
nected. There are two types of automatic capture: Program mode and Interval mode. You can
save time in either mode because, once the initial settings have been stored or you have decided
what pictures to capture, the subsequent capture process is carried out automatically.
PROGRAM CAPTURE
In the Program Capture mode, select the images you want to capture, and the JLIP Video
Capture Docking Station will automatically capture and transfer the images to your computer.
Preparation
•Make sure all units are properly connected
(੬ p. 12).
•Insert a tape into the video source unit.
Click "Image Format" in "Set-up" and select
"Field Picture" in the Capture Mode
(੬ p. 29).
Open the menu bar and click "Set-up" —
Set-up
1 "Capture Mode" — "Automatic".
Step by Step
Automatic
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
•The "Automatic Transfer" window
appears.
Select data to be transferred.
2 •When you select "Index Image", index
image data (80 x 60 pixels) is trans-
ferred to your computer.
•When you select "Index & Full Image",
both the index image data (80 x 60
pixels) and full image data (768 x 552
pixels) are transferred to the computer.
Select "Program Capture" and click
3 "OK".
NOTE:
•Before transferring your images, make
sure that enough space is available on
your hard disk. For full image data space
requirements, ੬ p. 24.
•When transferring full image data using
the Bitmap image format ( .bmp), the
9
transfer takes a very long time, causing
the video source unit to stop playback
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
Click "Window" — "VCR" to call up the
4 VCR Operation window.
5 VCR Operation window.
VCR
I
Operate the video source unit via the
00:01:23:12F
Click the "Capture" button on the desired
6 video image, and index image data (80 x
60 pixels) is transferred to the computer.
Capture
Transfer
•The message "No.1 index image being
transferred" appears during data
transmission.
Repeat steps 5 and 6 as necessary.
7
Click "Transfer" button.
8 •If you want to capture full image data
(768 x 552 pixels) after capturing the
"Index Image" in step 2, click "Index &
Full Image" and then click the "Trans-
fer" button.
1. The message "Index No.1 being
scanned" appears while the video
source unit is scanning the picture to
be captured.
2. The message "No.1 index image being
transferred" appears and then "No.1
full image being transferred." appears
while the full image data is being
transferred to the computer.
3. The images captured in step 7 are
scanned by the video source unit and
automatically transferred to the
computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CAPTURE (cont.)
28
EN
INTERVAL CAPTURE
Preparation
•Make sure all units are properly connected
(੬ p. 12).
The Interval Capture mode is best suited for
capturing images at set intervals from a video
source unit with a JLIP connector.
•Insert a tape into the video source unit.
Click "Image Format" in "Set-up" and select
"Field Picture" in the Capture Mode.
(੬ p. 29).
Open the menu bar and click "Set-up" —
1
"Capture Mode" — "Automatic".
Set-up
•The "Automatic Transfer" window
appears.
Step by Step
Automatic
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
Select the data to be transferred.
2 •When you select "Index Image", index
image data (80 x 60 pixels) is transferred
to your computer.
•When you select "Index & Full Image",
both index image data (80 x 60 pixels)
and full image data (768 x 552 pixels) are
transferred to the computer.
Select "Interval Capture".
3
Set the interval.
4 •Select the time interval at which pictures
VCR
are captured.
I
00:01:23:12F
Set the number of pictures to be captured
5
6
and click "OK".
Capture
Transfer
•From 1 up to 99
Click "Window" — "VCR" to call up the
VCR Operation Window. Start video
playback a few seconds prior to the point
where you want image capturing to start.
Operate the video source unit via the VCR
Operation window and click the "Transfer"
button at the desired picture.
7
1. The message "No. 1 index image being
transferred" appears while the index image
data is being transferred to the computer.
2. When you select "Index & Full Image" in
step 2, the message "No. 1 full image being
transferred" appears while the full image
data is being transferred to the computer.
3. The message "Index No. 2 being scanned"
appears while the video data are fast-
forwarded and played at the time intervals
set in step 4 to scan the video data on the
VCR.
NOTE:
•Make sure that enough hard disk space is
available on your computer before
executing video transfer.
For full image data space requirements,
੬ p. 24.
•Transfer of index image data/full image
data starts at the image box bordered in
green.
Click and select the desired image box.
•When transferring full image data using
• The image selected when "Transfer" is
clicked is captured and subsequent images
are captured at the time interval specified
by the counter value selected in step 4.
• The video source unit enters the Pause
mode when capture is complete.
the Bitmap image format ( .bmp), the
9
transfer takes a very long time, causing
the video source unit to stop playback
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE FORMAT SETTING
SELECTING A PICTURE FORMAT
EN
29
Under "Image Format", you can specify the full image data format and the capture mode.
Set-up
Open the menu bar
1 and click "Set-up"
— "Image Format".
Select capture mode.
3 •There are two different settings avail-
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
able: "Frame Picture" and "Field
Picture". Refer to "Capture Mode"
below for details.
•The "Image
Format" window
appears.
Click "OK".
4 •This completes picture format setting.
Select format.
2 •There are two different settings avail-
•This setting takes effect the next time
you use the capture function.
able: "JPEG (9. jpg)" and "Bitmap (9.
bmp)". Refer to "Picture Data Format"
below for details.
TRANSFER DATA
Full image data can be captured and transferred in two different formats.
Picture Data Format
● JPEG ( . jpg)
9
• This is the default setting. If you do not set Picture Format, image data is captured in this
format.
• JPEG (Joint Photographic Expert Group) is a leading standard defining the compression and
decompression of still colour pictures.
• The quantity of transferred data appears smaller because the images are compressed. This
results in a shorter transfer time.
● Bitmap ( . bmp)
9
• Transfer time is longer when you use this format because there is no data compression. The
benefit is that picture quality is maintained with no deterioration.
• Bitmap is a data format representing characters and graphics with combinations of pixels.
Full image data resolution is 768 x 552 pixels with 16.77 million colours (24-bit colour).
Index image data resolution is 80 x 60 pixels with 16.77 million colours (24-bit colour).
Capture Mode
● Frame Picture
• This is the default setting. If you do not set Picture Format, images are captured in this
mode.
• Since a frame consists of two overlapping 1/50 sec. images (one 1/25 sec. image forms a
field), it is unstable when capturing fast-moving motion pictures.
● Field Picture
• While a field contains only half the data of a frame — meaning that vertical resolution is
half that of a frame — images captured from a fast-moving motion picture are more stable
than when captured with "Frame Picture".
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL OPERATIONS
30
EN
COUNTER VALUE CHANGE
If you want to replace a captured image with a different one, you can capture the new one by
changing the counter value.
02
Click the image display box of the index
1 number you want to change.
•The box is bordered in green.
00:02:17:21
Open the menu bar and click "Edit" —
2 "Modify…".
•The "Modify Capture Point" window
appears.
Edit
Enter a new counter value.
Transfer the Index Image
Transfer the Full Image
Modify…
Delete
3
Click "OK".
4 •The index image is surrounded by a
Del
hatching pattern indicating that a
change is being made.
02
•The counter value is changed to the
value you just entered.
Open the menu bar and click "Set-up" —
5 "Capture Mode" — "Automatic", then
select "Program Capture" in the "Auto-
matic Transfer" window and click "OK".
00:01:23:12
02
Play the tape on the video source unit
6 and click "Edit" — "Transfer the Index
Image".
•Index image data at the counter setting
is captured.
00:01:23:12
•Be sure to complete steps 1 through 7.
If they are not all followed, the index
image and the full image will be
different as the full image data will not
have been changed in step 6.
NOTE : Note that if the index image data
is saved in step 4, the hatching
pattern indicating the change will
no longer appear the next time it
is called up.
Click "Edit" — "Transfer the Full Image".
7 •Full image data at the counter setting is
transferred.
COUNTER RESET
You can change the counter setting on connected video source units (VHS, VHS-C).
Set-up
Open the menu bar and click "Set-up" —
1 "Counter Reset".
Capture Mode
Image Format
Device Change
Initialize
•The VCR's counter is reset.
•The counters of DV-format digital
camcorders cannot be reset.
ID Change
Counter Reset
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
DELETE INDEX IMAGE AND FULL IMAGE
You can delete any captured picture. Both index image (80 x 60 pixels) and full image (768 x
552 pixels) are deleted.
Click the image display box you want to
02
1 delete.
•The box is bordered in green.
00:02:17:21
Open the menu bar and click "Edit" —
2 "Delete".
•This deletes the selected image data.
Then click "Window" — "Arrange
Edit
3 Index".
Transfer the Index Image
Transfer the Full Image
Modify…
•This removes the deleted index image’s
space and renumbers the remaining
index display box. You can still run the
program without re-arranging the
index.
Delete
Del
Window
Arrange Index
VCR
CHANGE ID
You can change the Video Capture Unit’s ID number.
Open the menu bar and click "Set-up" —
Set-up
1 "ID Change".
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
•ID Change window appears.
Enter a new ID number.
2
Click "OK".
3 •This completes the ID number change.
Open the menu bar and click "Set-up" —
4 "Initialize".
•The "JLIP Initialization" window
appears.
•Start JLIP initialization (੬ p. 18, 19).
Download from Www.Somanuals.com. All Manuals Search And Download.
SAVE PICTURE
32
EN
CREATE NEW FOLDER
Creating a new folder (directory) is a good idea when capturing an image from another video
tape.
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Open the menu bar and click "File" —
1 "New Album".
•The image display area is refreshed.
•If the index image data on screen is not
saved, you will be asked whether to
save or not.
Ctrl+S
Ctrl+A
Save Image As…
Exit
SAVING
Select when storing the contents displayed in the image display area (page 21).
Open the menu bar and click "File" —
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
1 "Save Album" .
•The "Save Album" window appears.
Ctrl+S
Ctrl+A
Type the folder name and title.
2 •You can save without entering any title.
Click "OK".
3 •The file is saved.
Save Image As…
Exit
Enter folder name
Enter title name
Save Album
Folder: c:\capture\index001
Title: (Untitled)
c:\
OK
capture
Cancel
c:
Select directory
Select drive
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
OPEN INDEX
File
Open the menu bar and click "File" —
1 "Open Album".
New Album
Open Album
Save Album
•The "Open Album" window appears.
Ctrl+S
Ctrl+A
Open JLIP (jlp) File
Select the name of the folder (directory).
Save As JLIP (jlp) File
Save Image As…
Exit
2
3
Click "OK".
SAVE THE FULL IMAGE DATA
You can save a file under another name or in another folder so that you can edit it without
losing the original.
By processing the captured images with commercially available image editing software, you
can create your own unique and highly personal illustrations and graphics for incorporation
into everything from postcards to newsletters and Internet homepages.
Click the image display box of the Index
1 No. to be saved.
File
•The image display box is framed in
New Album
Open Album
green.
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Ctrl+S
Ctrl+A
Click "File" — "Save Image As…" on the
2 menu bar.
•The "Save Image As… (Index No. )"
window appears.
Save Image As…
Exit
Click the name of the desired folder
3 (directory) in the Select Directory box
and enter the file name.
•When saving the data to floppy disk,
enter the drive name as well.
Click "OK".
4
NOTE:
•It is not possible to change the image
format when saving the full image data
(੬ p. 29).
•If the full image data has not been
transferred to the computer, it is not
possible to save it. First transfer the full
image data, then save it.
Download from Www.Somanuals.com. All Manuals Search And Download.
JLIP PLAYER SOFTWARE
USING JLIP PLAYER SOFTWARE DATA
34
EN
The GV-DS1 Video Capture Docking Station can capture JLIP Player software data at an edit-in
point corresponding to a preset counter number.
Preparation
•Make sure all units are properly connected
(੬ p. 12).
•Insert the tape program edited with the
Player Software into the video source unit.
•If the data is stored on a floppy disk, load
disk into the floppy disk drive.
Open the menu bar and click "File" —
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
1 "Open JLIP (jlp) File".
•The "Open JLIP (jlp) File" window is
displayed.
Ctrl+S
Ctrl+A
Double-click the name of the desired
2 folder (directory) in the Select Directory
box.
Save Image As…
Exit
•If the data is stored on a floppy disk,
enter the drive name.
Click on the file name to select it.
3
Click "OK".
4 •The computer monitor displays Scene
No., counter number at Edit-in Point,
and a blank image box.
Open the menu bar and click "Set-up" —
5 "Capture Mode" — "Automatic".
Select the data you want to transfer and
6 "Program Capture" and click "OK".
Click the "TRANSFER" button.
7 •The image data scanned by the video
source unit is automatically transferred
to your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
HOW TO STORE JLIP PLAYER DATA
Data from this unit can be converted to JLIP Player software files.
If index image data is saved as a JLIP Player software file, the file can be printed with the
optional GV-PT2 Video Printer.
Refer to the instruction manual for details.
Preparation
•Make sure all units are properly connected
(੬ p. 12).
•Insert a video tape into the video source
unit.
•If you want to store the data on a floppy
disk, load a data disk into the floppy disk
drive, create a directory and sub-directory
on the data disk (੬ p. 54).
Open the menu bar and click "File" —
1 "Save As JLIP (jlp) File".
File
New Album
Open Album
•The "Save As JLIP (jlp) File" window is
displayed.
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Ctrl+S
Ctrl+A
Enter the folder name (directory) and file
2 name.
•If you want to store the data on a
floppy disk, enter the drive name.
Save Image As…
Exit
Click "OK".
3 •The data converted to a JLIP Player
software file is stored on the floppy disk
in the selected drive.
•JLIP Player software files can be used
for video program editing or printed
with the video printer (੬ p. 58, 60).
NOTE : When stored data is opened with
the JLIP Player software, the edit-in
and edit-out points have the same
counter value. When you want to
perform program editing, change
the counter number at the edit-out
point in the JLIP Player software’s
"Modify Edit Points".
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
36
EN
NOTE : External noise or disturbance may interfere with the microprocessors built into the
GV-DS1 JLIP Video Capture Docking Station. If this happens, turn the power off and
then turn it on again.
Problem
Cause
Page
No effect when clicking the
Input Select/Memory
buttons.
ⅷ The windows do not change during transfer
or compression of index image/full image data.
ⅷ The video is displayed on the LCD screen of
the attached GR-DVM1 or GR-DVM801. It
is not possible to check the images on the
computer.
—
The video equipment image
is not displayed on the
connected TV.
ⅷ When video equipment is connected to the
CAPTURE EXT IN/PRINTER connector, its
video is displayed on the LCD screen of the
GR-DVM1, GR-DVM801.
—
The video unit does not
operate when "Window" —
"VCR" in the menu bar and
"VCR" in the "VCR" opera-
tion window are clicked.
ⅷ The counter display in the "VCR" operation
window turns blue.
ⅷ Is your video unit compatible with JLIP ?
Only JLIP-compatible units can be
operated.
23
If you are using a JLIP-compatible unit and
it still won’t work, check to make sure that
it is correctly connected.
11 – 13
ⅷ Is the video unit selected in "Select Unit" ?
Select correctly.
19
18
ⅷ Initialize JLIP.
ⅷ Make sure the video unit is turned on.
Reverse Slow Play and
Forward Slow Play not
available in "VCR" operation
window.
ⅷ These are available only when the video
—
unit has a Slow Play function.
The"VCR" operation
window display shows a
different operation from
what the video unit is
actually doing.
ⅷ Slow Play in the VCR operation window
automatically switches to Play after
approximately 20 seconds.
ⅷ In some cases, the video unit may continue
slow-motion playback even when the
"VCR" operation window changes from
Slow Play to Play. Check your video unit’s
instruction manual for details.
23
On-screen display of video
unit is stored in memory.
ⅷ If your video unit has an onscreen display,
—
—
turn it off.
Counter display appears in
the image display box even
when there is no tape in the
video unit.
ⅷ When capture video data from a powered-
on video unit with no tape loaded, a
counter display may appear in the image
display box. Images corresponding to the
displayed counter number can no longer be
caputred.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (cont.)
EN
37
Problem
Cause
Page
Cannot capture video data
with the desired counter
number.
ⅷ There may be a slight difference between
the counter of the video image that you
want to capture and the Index image data/
Full image data captured in the computer.
This is not a malfunction.
25 – 28
30
Counter cannot be reset.
ⅷ Counter reset is not available with digital
camcorders.
Program capture suddenly
stops.
ⅷ When you start program capture at the
beginning of the tape, the video unit stops
playback, ending program capture.
26
—
18
29
Start video capture about 20 seconds after
the point where the recording begins.
After finishing video
capture, the video file
remains in the JCPT folder
(where the program run file
is contained).
ⅷ If you want to erase the file because of
limited hard disk space, start the program
once then close it. The video remaining in
the JCPT folder will be cleared.
JLIP initialization not
possible.
ⅷ Make sure that the IRQ (Interrupt ReQuest)
is not being used by another device.
ⅷ COM port selection is wrong. Confirm the
COM port number and execute JLIP
initialization again.
With Video capture/
Transfer done in Automatic
Transfer mode, the captured
image looks like two
pictures laid one upon
another.
ⅷ In this case, video capture is not possible
using the "Frame Picture" setting. Change
the setting to "Field Picture" and try video
capture again.
The monitor displays of the application software illustrated in this manual may differ from
those you are actually viewing depending on the operating environment of your computer.
Operation will be significantly slower when used in an environment other than that recom-
mended (page 14).
While basic VCR operations such as playback and fast-forward are available, a "transmis-
sion error" may occur in some models during video transfer. In this case, start the software
again, and turn the power of the Video Capture Docking Station off and on.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF ERROR MESSAGES
38
EN
ⅷ Appears when:
Message
Page
Ⅵ Action:
COM port is not
available.
ⅷ Not connected to COM port set by JLIP Initialize.
Ⅵ Check the COM port number and connector and
retry JLIP initialization.
18
Connected device
not found.
ⅷ Connected devices are not turned on.
ⅷ Selected COM port is not connected properly.
Ⅵ Make sure connection is proper and carry out JLIP
initialization. Then turn on this unit and the
connected devices.
18,19
Error — Transfer
halted.
ⅷ Video unit is brought to STOP or ends playback
during automatic capture.
Ⅵ Check the auto capture setting.
ⅷ Full image data (768 x 552 pixels) cannot be
captured if you start auto capture at the beginning
of the tape. Video capture stops if video playback
is stopped.
—
Ⅵ Start video capture 20 seconds after the start of the
recording.
28
ⅷ Tape is too short to match the preset number of
images or there is a section of non-recorded tape.
Ⅵ Click "OK", check the tape length and re-enter the
number of images to be captured. Use a fully
recorded tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
ⅷ Appears when:
Ⅵ Action:
Message
Page
Execute after
playing back the
VCR.
ⅷ Video unit is not in Play mode during Interval
Capture.
Ⅵ Click "OK", set the video unit to Play and click
"Transfer" again.
28
Not enough disk
space is available.
ⅷ Remaining disk space is under 1 MB.
Ⅵ Click "OK" , check disk space and select a drive
with space available with Store As.
—
—
Communication
error.
ⅷ If operation stops after this message appears, turn
the Capture Docking Station off and then on again.
Images stored in memory will be lost.
Ⅵ Do not use any other application while JLIP Video
Capture and JLIP player are running as it may
interfere with communication. Do not click and
move the mouse during data transfer.
ⅷ If your computer's energy saver, battery voltage
indication or screen saver is engaged, the image
data transmission may be interrupted.
Ⅵ Disengage these functions. Refer to your
computer's instructions manual on details.
Check the capture
device.
ⅷ If operation stops after this message appears, turn
the Capture Docking Station off and then on again.
Images stored in memory will be lost.
—
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
40
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
JLIP PLAYER SOFTWARE
SECTION
q The Readme.TXT file provides additional information for setup and information
that is not included in the instruction manual. Please read the file before installing
the provided software program.
q You can find the latest information (in English) on the provided software program
at our www server.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS (When Using JLIP Player Software)
42
EN
WHEN CONNECTING TO A VIDEO SOURCE UNIT WITH JLIP
CONNECTOR OR TO A VIDEO PRINTER
Ⅲ Be sure to turn off the power of all connected units before making any connections.
Ⅲ When connecting the provided cable, be sure to connect the plug with the Core Filter to the
Video Capture Docking Station.
To digital
connector
(8 pin)
To COM port
(RS-232C)
Core
Filter
PC connection
cable (provided)
PC
3.5 mm diameter
4-pole cable
(provided)
When connected with the Video Printer
GV-PT2 Video
Printer
Connect this if
the video unit
has an S-Video
input connector
To JLIP connector
S-Video
cable
To S-Video input connector
To video input connector
If you edit using a non-JVC VCR...
T
W
It is possible to use the remote control unit provided with the GR-DVM1
and GR-DVM801. Also refer to the GR-DVM1’s or GR-DVM801’s
instructions on connection and operation with your brand of VCR.
NOTE:
Some VCR brands or models cannot be operated.
RM-V708U or RM-V710U
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
Ⅲ When using the Video Capture Docking Station, use the AA-V80EG AC Adapter/Charger
(optional or provided with the camcorder).
Digital camcorder
JLIP
JLIP Video Capture
Docking station
To edit jack
To JLIP
jack
Core Filter
AC Power
Adapter/Charger
(yellow) (white) (red)
To S
output
jack
To video/
audio output
jack
To DC
output jack
Core
Filter
DC
cord
Core
Filter
Core
Filter
Connect this
if the video
unit has an
S input jack
EDIT cable
(provided)
AUDIO/
VIDEO
S-Video
cable
(provided)
cable
(provided)
To
AUDIO
input
To S-Video output jack
To video output jack
To
VIDEO
input
jack
To S-
VIDEO
input
jacks
Video cable
(L/R)
(red) (white) (yellow)
jack
VIDEO OUT
select switch
(Y/C or CVBS)
Cable adapter (provided only
with European models)
If your VCR has the 21 pin AV
input connector (SCART), use
the provided cable adapter.
Connect to TV
Connect to AV jack-
equipped TV or to VCR
Connect
to TV
JVC Video unit
(Recording deck)
To remote
pause jack
TV
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
What is JLIP ?
JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows AV
units equipped with a JLIP terminal to be controlled by a personal computer.
*
is a registered trademark of JVC.
Operating Environment
● Personal computer with Microsoftா Windowsா 3.1 or Windowsா 95
● CPU Intel DX4™ or higher processor
● Minimum RAM requirement: more than 8 MB
● Available Hard Disk space of at least 8 MB
● Colour display capable of at least 640 x 480 pixels, 256 colours
Recommended 1024 x 768, 16.77 Mil colours
● 1 free serial transmission port, compatible with 9600 bps transmission rate, conneclable to
RS-232C with 9 pin serial connector.
Recommended compatible with UART 16550A
● Mouse (Windowsா compatible)
● CD-ROM drive
Note : An optional 9 pin serial conversion adapter is required for computers using serial
communication port other than standard 9 pin.
* Microsoftா and Windowsா are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
* Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
Devices to connect to the VIDEO CAPTURE DOCKING STATION
● Camcorder equipped with JLIP connector
● Video printer equipped with JLIP connector, GV-PT2 (as of March, 1997)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING (JLIP Player Software)
EN
WINDOWSா 95
Refer to the Windowsா 95 manual or your
computer’s manual for details on basic
Windowsா 95 operating procedures.
WINDOWSா 3.1
Refer to the Windowsா 3.1 manual of or your
computer manual for details on basic
Windowsா 3.1 operating procedures.
Installation Procedure
Installation Procedure
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
*To start the setup program...
*To start the setup program...
Launch Windowsா 95
Launch Windowsா 3.1
1 •Close any other applications that are 1 •Close any other applications that are
running.
running.
Insert the "VIDEO MOVIE PLAYER" CD-
Insert the "VIDEO MOVIE PLAYER" CD-
2 ROM into the CD-ROM drive.
2 ROM into the CD-ROM drive.
Choose "Run" from the "Start" on the
Choose "Run" from "File" in the "Program
3 taskbar.
3 Manager".
If you want English on-screen mes-
If you want English on-screen mes-
4 sages…
4 sages…
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPE\SETUP" in
the box to the right of "Name". If the disk
is in Drive E, type "E:\VMPE\SETUP".
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPE\SETUP" in
the box to the right of "Name". If the disk
is in Drive E, type "E:\VMPE\SETUP".
If you want French on-screen mes-
sages…
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPF\SETUP" in
the box to the right of "Name". If the disk
is in Drive E, type "E:\VMPF\SETUP".
If you want French on-screen mes-
sages…
If the "VIDEO MOVIE PLAYER" CD-ROM
is in Drive D, type "D:\VMPF\SETUP" in
the box to the right of "Name". If the disk
is in Drive E, type "E:\VMPF\SETUP".
•Click "OK".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "MOVIE
PLAYER" icon appears on the screen.
•"MOVIE PLAYER Setup was completed
successfully." appears.
•When setup is complete, the "MOVIE
PLAYER" icon appears on the screen.
•"MOVIE PLAYER Setup was completed
successfully." appears.
Click "OK" to complete installation.
Click "OK" to complete installation.
5
5
NOTE : This instruction manual uses
English on-screen messages in its
explanation.
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING JLIP PLAYER SOFTWARE
EN
Starting JLIP Player Software
PREPARE DEVICE(S)
Turn the device(s) on and set the
camcorder's Power Dial to "PLAY".
1
ACCESS MOVIE PLAYER
2
MOVIE
PLAYER
Double-click the MOVIE PLAYER icon
and the Serial Port Selection dialog box
appears.
SELECT SERIAL PORT
3
Select the port number of the connector
you are using to connect the computer to
the Video Capture Docking Station.
•If the connector number is A, B... A
corresponds to 1.
Serial Port Selection
Select a Serial Port.
•Click "OK".
COM 1
•If the connection is correct, the Device
Selection dialog box appears.
COM 2
COM 3
COM 4
OK
CANCEL
Initializing JLIP
Now checking devices' ID ...
ID:10
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
•An error message "No devices detected
to connect. Power ON all devices in
system." appears . . .
... when a wrong port number is
selected.
... when the connection is wrong.
... when the device's ID number is
already in use.
... when the device's power is not
turned on.
Check the Serial Port selection, too.
To return to step 1, check the connection
and the device's power and try again.
Device Selection
Select device to control.
•When all serial COM ports are
occupied by other applications the
error message "Error--This application
will close. Check devices--Confirm that
power is ON." appears. Free a serial
COM port to start up JLIP Player
Software.
VCR
DISCONNECT
06:VCRCAMERA
OK
CANCEL
VIDEO PRINTER
DISCONNECT
SELECT DEVICE(S)
Click on the name of the device you
wish to control. Clicking "OK" brings up
the MOVIE PLAYER window.
4
•It is possible to select a second device
of a different type simultaneously, but it
is impossible to select two same type
devices simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVIE PLAYER WINDOW BUTTONS AND DISPLAYS
EN
5.POWER button
Control-menu box
Menu bar
1.COUNTER system
3.ID number
2.Tape counter
display
Title bar
Icon button
4.FILE name
MOVIE PLAYER
File Edit Video Printer Help
Non Drop
ON OFF
00:00:00:00F
MEMO
COUNTER
POWER
ID 06 FILE
6.MEMO
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
PROGRAM PLAYBACK
SCENE CUT IN
11. MODE display
8.START button
12. SCENE button
CUT OUT
REW
ELAPSED TIME
00:00:00:00F
IN/OUT
10. Camcorder's operation
buttons
13. IN/OUT point button
14. Message display
9.ELAPSED TIME
7.IN/OUT point display
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
1. COUNTER system
10.Camcorder's operation buttons
• Operate the camcorder.
2. Tape counter display
• Displays actual tape position.
Stop button
ex.
REW/REW Search button
Play button
00:
01:
45:
10F
(Hours : Minutes : Seconds : Frames)
FF/FF Search button
Pause button
3. ID number
• Displays the selected device's ID
number.
Reverse Slow button
Forward Slow button
4. FILE name
• Displays file name after saving the
program under a new name.
• To start Reverse/Forward Slow-motion
Search, first click the Pause button and
then the Reverse/Forward Slow button.
• Functions your camcorder does not
have cannot be performed by the above
buttons.
• Click "File" — "Open VCR Control
Window" on menubar to call up the
"VCR Control" window. You can control
the video source unit from this window.
ex. travel
5. POWER button
• Turns the device on and off.
• If power is not supplied to the
camcorder beforehand, you can not turn
the camcorder on and off by clicking
this button.
• Some camcorders cannot be turned on
and off by clicking this button.
11. MODE display
6. MEMO
• Displays the camcorder's mode when
operating the above buttons.
• If you wish to add some comment to the
file, you can input it.
12.SCENE button
ex. Europe Tour
• Plays back only one programmed scene
so that you can preview it.
7. IN/OUT point display
• You can set up to 99 in/out points per
file.
• Operates only the camcorder.
13.IN/OUT point button
• Registers the cut-in and -out points of
the scene you want to dub.
8. START button
• Starts editing. Scenes are recorded in
scene's numerical order. After starting
editing, this button changes to STOP
button.
14.Message display
• Displays the connected device mode,
etc.
9. ELAPSED TIME
• Displays the total elapsed time of all the
programmed scenes.
To exit from the MOVIE PLAYER
window, choose "Exit" from "File".
NOTE:
If you need the "MOVIE PLAYER HELP"
window, choose "Contents" from "Help".
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Operating camcorder
Setting in/out points
PREPARE CAMCORDER
Set the camcorder's Power Dial to
"PLAY" and insert a recorded tape into
the camcorder.
PLAYBACK ON TV MONITOR
Click . Playback picture appears on the
TV monitor.
1
1
ᮣ
SET CUT IN/OUT POINTS
Select "Set Function" from "Edit" in the
Movie Player window and select "Edit
Tape".
2
PLAYBACK ON TV MONITOR
2
ᮣ
Click . The PLAY lamp lights in the
MODE display.
To set CUT IN/OUT points, click IN/OUT
button at the beginning and end of the
scene you want to dub.
•Playback picture appears on the TV
monitor.
•To confirm other operations, click other
buttons.
•Set CUT IN/OUT points so that the
CUT OUT point's value is larger than
the CUT IN point's.
•A scene with no CUT OUT point will
disable program playback and dubbing.
•If you set CUT IN point at the begin-
ning of the tape or if you set CUT OUT
point at the end of the tape, editing
may not function properly. Change
previously registered CUT IN/OUT
points slightly and try setting them
again.
•When connecting to a VHS-C
camcorder, rewind the tape to its
beginning and press COUNTER RESET
on the camcorder.
•The counters of DV-format digital
camcorders cannot be reset.
MOVIE PLAYER
File Edit Video Printer Help
Non Drop
COUNTER
POWER
00:20:35:16F ID 06 FILE
MEMO
ON OFF
PROGRAM PLAYBACK
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
SCENE
01
CUT IN
CUT OUT
00:01:30:12F
00:07:15:21F
00:15:50:11F
00:03:27:14F
00:10:40:18F
00:20:33:10F
02
03
REW
ELAPSED TIME
00:10:04:28F
IN/OUT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Playing back one programmed scene
MOVIE PLAYER
File Edit Video Printer Help
SELECT SCENE
Click on the line where the CUT IN/OUT
points you want to preview are displayed
and that line will be highlighted.
Non Drop
COUNTER
POWER
00:01:25:17F ID 06 FILE
MEMO
1
ON OFF
PROGRAM PLAYBACK
SCENE
STOP
MODE
STILL
PLAY
SEARCH
SLOW
FF
SCENE
01
02
03
CUT IN
CUT OUT
00:01:30:12F
00:07:15:21F
00:15:50:11F
00:03:27:14F
00:10:40:18F
00:20:33:10F
START PLAYBACK
Click "SCENE".
•The camcorder searches the scene by
going to a point prior to the CUT IN
point and starts playback at the CUT IN
point. Playback stops after the CUT
OUT point is passed.
2
REW
ELAPSED TIME
00:10:04:28F
IN/OUT
Scene playback is executing.
Playing back all programmed scenes
MOVIE PLAYER
File Edit Video Printer Help
START PLAYBACK
Click "START".
•The camcorder plays back scenes in
numerical order and stops immediately
after the last scene's CUT OUT point.
•Only the camcorder moves.
1
Non Drop
COUNTER
POWER
00:01:25:17F ID 06 FILE
MEMO
ON OFF
PROGRAM PLAYBACK
SCENE
STOP
MODE
STILL
PLAY
SEARCH
SLOW
FF
SCENE
01
02
03
CUT IN
CUT OUT
00:01:30:12F
00:07:15:21F
00:15:50:11F
00:03:27:14F
00:10:40:18F
00:20:33:10F
NOTES:
REW
ELAPSED TIME
00:10:04:28F
● During playback of programmed scenes, do
no operation other than pressing "STOP".
If other operations are done, a malfunction
may occur.
IN/OUT
Program playback is executing.
● If "SCENE" or "START" is clicked at the end
of tape, the camcorder will not function
properly.
● If the source tape has a blank portion,
scenes will not be edited properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (cont.)
EN
Dubbing
You can record all programmed scenes onto
the tape in the recording deck.
Dubbing is possible only when the GR-
DVM1or GR-DVM801 is connected. (as of
March, 1997)
MOVIE PLAYER
File Edit Video Printer Help
Non Drop
COUNTER
POWER
00:01:30:10F ID 06 FILE
MEMO
ON OFF
PREPARE NEW TAPE
Make sure the erase protection tab on
the tape is present. Then insert it into the
recording deck and set the recording
deck to the Record-Pause mode.
PROGRAM PLAYBACK
SCENE
STOP
MODE
STILL
PLAY
SEARCH
SLOW
FF
1
SCENE
01
02
03
CUT IN
CUT OUT
00:01:30:12F
00:07:15:21F
00:15:50:11F
00:03:27:14F
00:10:40:18F
00:20:33:10F
REW
ELAPSED TIME
00:10:04:28F
START EDITING
Click "START" on the MOVIE PLAYER
window.
When editing stops, the camcorder
enters the Stop mode and the recording
deck enters the Record-Pause mode.
IN/OUT
2
Rec On ! !
•During dubbing, do no operation other
than pressing "STOP". If other opera-
tions are done, a malfunction may
occur.
STOP EDITING
Stop the recording deck.
3
NOTES:
● Also refer to the camcorder's instruction
manual on dubbing.
● There may be small margin between the
CUT IN/OUT points you input and the
dubbed scenes' ones.
● Dubbing is impossible using a camcorder
whose JLIP connector serves as an Edit
jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Saving the program list on hard disk
It is possible to save all programmed scene
information as a file in the computer.
MOVIE PLAYER
File Edit Video Printer Help
START SAVING
Select "Save As" from "File" on the
MOVIE PLAYER window.
•The "Save a program list" dialog box
appears.
New
Ctrl+N
1
00:01:33:04F ID 06 FILE
MEMO
Open
Ctrl+O
Save
Ctrl+S
Save As...
Ctrl+A
CK
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
ID Change
Device Change
CUT OUT
Name Change
2F
1F
00:03:27:14F
00:10:40:18F
00:20:33:10F
Pause Time...
Open VCR Control Window
1F
ENTER FILE NAME
Input a file name (up to 8 characters) in
the "FILE NAME" field.
•The extension is jlp. ex.: travel.jlp
•You can also input a comment (up to
30 characters) in the "MEMO" field.
Close Serial
Initialize
2
Counter Reset
REW
00:10:04:28F
Exit
IN/OUT
SAVE FILE
Click "OK" and the file will be saved on
the hard disk which is in use.
3
Save a program list
FILE NAME
travel
DIRECTORY
c: \
jlip
tape
Saving the program list on a floppy disk
Prepare floppy disk by creating a directory
named "JLIP" and subdirectory named "tape"
beforehand.
DRIVE
c:
SELECT FLOPPY DISK DRIVE
Click in "DRIVE".
OK
1
2
3
ᮢ
MEMO
CANCEL
Europe Tour
OPEN SUBDIRECTORY
Click "tape" in the "DIRECTORY".
SAVE FILE
Click "OK".
NOTE:
If the MOVIE PLAYER window is closed
before saving the file, the file will not be
saved. So, save the file before closing the
MOVIE PLAYER window if you wish to keep
it.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (cont.)
Opening a file saved on floppy disk
INSERT FLOPPY DISK INTO
EN
Opening a saved file
LOOK FOR FILE NAMES
Click "Open" from "File" on the MOVIE
PLAYER window.
•The "Open a program list" dialog box
appears.
1
DRIVE
1
SELECT DRIVE NUMBER
Click in "DRIVE".
2
3
4
ᮢ
LOOK FOR FILE NAMES
Open "tape" in the directry.
SELECT FILE NAME
Saved file names appear in the "FILE
NAME" field. Click on the file name you
want and it appears in the field above.
2
SELECT FILE NAME
Follow steps 2 and 3 in "Opening a
saved file" on the left.
DETERMINE FILE NAME
Click "OK" and the file will be read.
•The MOVIE PLAYER window returns.
3
MOVIE PLAYER
File Edit Video Printer Help
Open a program list
New
Ctrl+N
Ctrl+O
00:00:00:00F ID 06 FILE
MEMO
Open
FILE NAME
travel. jlp
DIRECTORY
Save
Ctrl+S
c: \
jlip
tape
Save As...
Ctrl+A
CK
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
travel. jlp
ID Change
Device Change
CUT OUT
Name Change
Pause Time...
Open VCR Control Window
DRIVE
c:
Close Serial
Initialize
OK
Counter Reset
REW
00:00:00:00F
MEMO
Exit
CANCEL
Europe Tour
IN/OUT
Correcting and cutting the programmed counter data
Correcting the program counter data
Cutting the counter data being set up
DESIGNATE SCENE
Double-click on the scene you want to
modify.
DESIGNATE SCENE
Click on the scene you want to cut.
1
1
CUT SCENE
2
OR...
Click on the scene you want to modify
and choose "Modify" from "Edit".
Choose "Cut" from "Edit".
•The message "Scene No. will be
deleted." appears.
•The "Modify Edit Points" dialog box
appears (੬ pg. 55).
To cut the scene, click on "OK".
ENTER NEW DATA
Click on the part to be corrected and
input a new value there. To correct the
data, click on "OK".
Cutting all programmed scenes
2
CUT SCENE
1
Choose "All Clear" from "Edit". The
message "OK to delete all programmed
scenes ?" appears. To cut, click on "OK".
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Copying a programmed scene and
transferring it to an other position
Transferring the programmed scene to
an other position
DESIGNATE SCENE TO BE COP-
DESIGNATE SCENE TO BE
1
1
IED
TRANSFERRED
Click on the scene you want to copy.
Click on the scene you want to transfer
and choose "Cut" from "Edit".
STORE DESIGNATED SCENE IN
MEMORY
Choose "Copy" from "Edit".
•The message "Scene No. will be
deleted." appears.
To cut, click on "OK".
2
DESIGNATE POSITION
Click on the scene number which is
above the position to which the copied
scene is to be transferred.
DESIGNATE POSITION
Click on the scene number which is
above the position to which the scene is
to be transferred.
3
2
TRANSFER COPIED SCENE
Choose "Paste" from "Edit".
TRANSFER CUT SCENE
Choose "Paste" from "Edit".
4
3
MOVIE PLAYER
File Edit Video Printer Help
Modify...
Cut
Ctrl+E
Ctrl+X
C
00:27:10:21F ID 06 FILE
MEMO
Modify Edit Points
All Clear
Del
P
Copy
Paste
Ctrl+C
Ctrl+V
Enter the new [in] and/or [out] points.
PACK
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
Set Function
SCENE
01
CUT IN
CUT OUT
IN POINT
00
:
:
12
16
:
:
10
50
:
:
12
18
F
F
00:05:55:12F
00:12:10:12F
00:23:22:10F
00:10:37:12F
00:16:50:18F
00:27:08:16F
02
03
OUT POINT 00
OK
REW
ELAPSED TIME
00:13:08:12F
CANCEL
IN/OUT
Overwriting the file
Saving any previously saved program using the same name. Overwrite erases the previously
saved data for that file.
OVERWRITE FILE
1
After opening a file and modifying counter data (੬ pg. 54), choose "Save" from "File" on
the MOVIE PLAYER window and click on "OK".
•The message "This file already exists. Do you want to overwrite it ?" appears.
To overwrite the file, click on "OK".
Download from Www.Somanuals.com. All Manuals Search And Download.
ENVIDEO PRINTER WINDOW BUTTONS AND DISPLAYS
2.POSITION button
1.POWER button
Title bar
Icon button
Video Printer
POWER ON OFF POSITION
3.ID number
ID 20
HIGH LOW
STROBE SPEED
9.STORE button
10. PRINT button
STORE
PRINT
16
4
STROBE
SELECTED
SAME
ON OFF
SELECT
SOURCE
MEMORY
OFF
PIX STABILIZER
11. SELECT
(scene select)
button
MULTI-PIX
CONTENT
12. CLOSE button
Aperture Off ! !
CLOSE
8.PIX STABILIZER button
7.STROBE SPEED button
6.CONTENT button
5.MULTI-PIX button
4.Message display
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
1. POWER button
10.PRINT button
• Turns the device on and off.
When connected to the GV-PT2
• Print command is available.
2. POSITION button
• Selects the position to store a scene in
memory for Multi-Print.
11. SELECT (scene select) button
• Switches between "SOURCE" (images
from camcorder or VCR) and
3. ID number
"MEMORY" (scenes stored in memory)
for display on TV monitor.
• Displays the selected device's ID
number.
12.CLOSE button
4. Message display
• Closes the "Video Printer" window.
• Displays the operating mode of the
selected device.
5. MULTI-PIX button
ᮡ
• Select by clicking ( /ᮢ) button.
OFF : Single print
4
16
: 4 shots on one sheet
: 16 shots on one sheet
6. CONTENT button
ᮡ
• Select by clicking ( /ᮢ) button.
STROBE : Stores the selected number of
images at short intervals, and
prints them all on one sheet.
SELECTED : Prints 4 or 16 selected scenes
on one sheet.
SAME
: Prints the same scene 4 or 16
times on one sheet.
7. STROBE SPEED button
• Effective when "STROBE" is selected
from "CONTENT".
HIGH : When printing in the Strobe Print
mode, the GV-PT2 stores scenes
at intervals of approximately 1/
15 second.
LOW : When printing in the Strobe Print
mode, scenes are stored at
intervals of approximately 1/2
second.
8. PIX STABILIZER button
ON : If the scene you want to print is
jittery, select "ON" to stabilize it.
OFF : Usually set to "OFF".
9. STORE button
• Stores scenes and titles you want to
print in the video printer's memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PRINTER OPERATION (GV-PT2)
EN
Printing
Before printing, perform the procedure listed below.
● Connect to image and sound source (੬ pg. 42, 43).
● Set VCR to external input.
● Set TV to VIDEO mode so that images from video printer appear.
BRING UP VIDEO PRINTER
STORE SCENE
Click "STORE" on the "Video Printer"
window at the scene you want to print.
•The selected scene is stored in memory
and appears on the TV monitor.
1 WINDOW
3
4
Select "Set-up" from "Video Printer" on
the MOVIE PLAYER window.
•The "Video Printer" window appears.
•To view the buttons on the MOVIE
PLAYER window, move the "Video
Printer" window to the right and up
keeping the title bar on the "Video
Printer" window clicked.
PRINT
Insert print paper into the video printer
and click "PRINT".
•Also refer to the video printer's
instruction manual.
PLAYBACK
2
ᮣ
Click on the MOVIE PLAYER window.
•The "Video Printer" window appears
behind the MOVIE PLAYER window.
•To view the "Video Printer" window,
click the title bar labelled "Video
Printer".
The following print styles are also available:
● Printing the same scene 4 or 16 times on one sheet. (Multi-Print)
● Printing various scenes on the same print sheet. (Multi-Print)
● Printing a scene within a scene. (Inset Print)
● Storing a selected number of images at short intervals and printing them on one sheet.
(Strobe)
Also refer to the video printer's instruction manual.
MOVIE PLAYER
File Edit Video Printer Help
Video Printer
Set-up
COUNT
POWER
00:00:00:00F ID 06 FILE
MEMO
POWER ON OFF POSITION
ID 20
ON OFF
HIGH LOW
STROBE SPEED
STORE
PRINT
PROGRAM PLAYBACK
SCENE CUT IN
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
16
4
STROBE
SELECTED
SAME
CUT OUT
ON OFF
SELECT
SOURCE
MEMORY
OFF
PIX STABILIZER
MULTI-PIX
CONTENT
REW
ELAPSED TIME
00:00:00:00F
IN/OUT
Aperture Off ! !
CLOSE
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Quitting the "Video Printer" window
Quitting the MOVIE PLAYER window
CLICK "CLOSE"
•The "Video Printer" window closes.
CHOOSE "EXIT" FROM "FILE"
•The MOVIE PLAYER window closes.
1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PRINTER OPERATION (GV-PT2)(cont.)
EN
Auto Capture
Preparation
• Load the tape into the video unit.
• Convert the captured data to JLIP Player
software data and store it (੬ p. 35).
• Select file name (੬ p. 54).
• Prepare for printing (refer to the GV-PT2
instruction manual).
Select "Video Printer" — "Set-up" in the
1 MOVIE PLAYER window.
•Video Printer window appears.
Select the number of scenes (OFF/4/16)
2 and select "SAME" or "SELECTED" for the
content.
•Select this by clicking the buttons
ᮡ
(
/ᮢ).
• Select desired layout using the remote
control unit provided with the GV-PT2.
To Print Captured Video Data with
Video Printer
Captured video data can be automatically
scanned and printed.
You can print OFF, 4 or 16 images on one
sheet.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Click Title in the MOVIE PLAYER
3 window and activate the window.
Select "Edit" — "Set Function" — "Auto
4 Capture".
Click "START"
5 •The captured video data set first is
searched and stored in the video
printer.
•When the data has been stored, the
message "Image has been captured by
printer." appears.
•If the number of scenes was set to
"OFF", or "4 or 16" in step 2 and then to
"SAME", you can start printing simply
by clicking "PRINT".
Auto-Capture
Image has been captured by printer.
PRINT
NEXT SCENE…
CANCEL
•If the number of scenes was set to "4 or
16" in step 2 and then to "SELECTED",
click "Next Scene". The next scene is
automatically searched and stored in
the video printer.
Click "PRINT" to start printing.
6
NOTES:
To print only the cut-in scene on the
edited tape
1 Perform editing (refer to pages 50 through
52).
2 Print (follow steps 1 through 5 above).
● Select "Auto Capture" in step 4.
● Click "START" in step 5. The cut-in point
of Scene No. 1 is automatically
searched and stored in the video printer.
● You cannot start storing from Scene No.
2 or subsequent scenes.
● Even if the video unit is in Stop mode,
clicking "START" automatically starts
playback to search the cut-in point of
Scene No. 1.
● If you want to print a particular scene
only, click "SCENE" in step 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATIONS
EN
Changing ID number
The device's ID number is preset at factory as follows:
ex. Camcorder: 06 or 07
Video printer: 20
When connecting more than two same type devices, the same ID numbers will exist and a
malfunction can occur. To avoid a malfunction, change the ID numbers.
It is recommended to change the ID number of an already connected device before connect-
ing the same type device.
ACCESS "ID CHANGE" DIALOG
BOX
Choose "ID Change" from "File" on the
MOVIE PLAYER window.
SET ID NUMBER
Click "OK".
•The message "The device ID will be
changed." appears.
1
2
4
•The "ID Change" dialog box appears.
Clicking "OK" again sets that ID
number and brings up the MOVIE
PLAYER window.
SELECT DEVICE
Click on the name of the device and
"CHANGE".
•The dialog box to enter new ID number
appears.
NOTES:
● After step 4, perform the following
‘Connecting other device during operation’.
● Do not enter ID number "0" because "JLIP
Player Software" does not recognize "ID 0".
3 ENTER NEW ID NUMBER
ID Change
Select the device to change.
VCR
ID Change
06:VCRCAMERA
CHANGE
CLOSE
Enter a number between 1 and 99.
ID =
06
OK
VIDEO PRINTER
CHANGE
CANCEL
Connecting other device during operation
When connecting an other device during operation or changing ID numbers, initializing is
necessary to confirm the connected devices. (Not necessary to run "JLIP Player Software" from
beginning again.)
INITIALIZE
1
Choose "Initialize" from "File" on the MOVIE PLAYER window.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Changing the name of the device
Changing the device to use while
connecting over two same type de-
vices
ACCESS "NAME CHANGE"
1
DIALOG BOX
Choose "Name Change" from "File" on
the MOVIE PLAYER window.
ACCESS "DEVICE SELECTION"
1
DIALOG BOX
•The "Name Change" dialog box
appears.
Choose "Device Change" from "File" on
the MOVIE PLAYER window.
•The "Device Selection" dialog box
appears.
SELECT DEVICE
Click on the name of the device and
"CHANGE".
•The dialog box to enter new name of
the device appears.
2
SELECT DEVICE
Click on the name of the device and
"OK".
2
3 ENTER NEW NAME
NOTE:
It is impossible to use two same type devices
simultaneously.
SET NEW NAME
4
Click "OK".
Device Selection
Select Devices to control.
VCR
DISCONNECT
06:VCRCAMERA (1)
•The message "Device name will be
changed." appears.
Clicking "OK" again sets that device
name and brings up the "Name
Change" dialog box.
OK
07:VCRCAMERA (2)
CANCEL
RETURN TO MOVIE PLAYER
VIDEO PRINTER
DISCONNECT
5
WINDOW
Click "CLOSE".
Name Change
Select the device to change.
VCR
06:VCRCAMERA
CHANGE
CHANGE
CLOSE
When Using the Video Capture Software
The JLIP Player Software and JLIP Video
Capture Software cannot run simultaneously.
When you want to run the JLIP Video
Capture Software, first select "Close Serial"
from "File" on the menu bar. To resume using
the JLIP Player Software, click the "JLIP"
button in the JLIP Video Capture Software
and select "Open Serial" from "File" on the
JLIP Player Software's menu bar.
VIDEO PRINTER
Name Change
Enter new name (up to 20 letters).
06
VCRCAMERA (1)
=
OK CANCEL
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATIONS (cont.)
EN
Adjusting the gap between the stored edit-start point in the computer and the
dubbed one in the recording deck
During dubbing, the beginning of the scene stored in the computer can be missed or the scene
prior to the transition you chose for the edit-start point can be dubbed into the recording deck.
When these cases occur, adjust the gap for more accurate editing.
CHECK EDIT-START TIMING
After dubbing (੬ pg. 52), play back the
dubbed scene.
DETERMINE VALUE
Click "OK".
•This value is stored in the computer.
1
2
4
5
ACCESS "PAUSE TIME CORREC-
TION" DIALOG BOX
Choose "Pause Time" from "File" on the
MOVIE PLAYER window.
•The "Pause Time Correction" dialog box
appears.
CHECK EDIT-START TIMING
AGAIN
To check the corrected edit-start timing,
dub the stored scenes and play them
back.
NOTE:
ENTER VALUE
To adjust the edit-start timing, enter a
new value from 0.00 sec. to 2.60 sec.
Even if the edit-start timing is adjusted, there
can be a slight margin between the adjusted
edit-start point and the dubbed scenes' one.
3
When the scene prior to the transition
you chose for edit-start point is dubbed:
Enter a smaller value than 1.30.
When the beginning of the scene stored
in the computer is missed:
Enter a larger value than 1.30.
•Factory preset is 1.30 sec.
MOVIE PLAYER
File Edit Video Printer Help
New
Ctrl+N
00:00:01:20F ID 06 FILE travel
MEMO Europe Tour
Open
Ctrl+O
Pause Time Correction
Save
Ctrl+S
Save As...
Ctrl+A
Type in the value from 0.00(sec) to 2.60(sec),
to adjust pause time during editing.
CK
SCENE
START
MODE
STILL
PLAY
SEARCH
SLOW
FF
ID Change
CUT OUT
Device Change
Name Change
2F
1F
1F
00:03:27:14F
00:10:40:18F
00:20:33:10F
Pause Time...
Pre-start time = 1.30 (sec)
Open VCR Control Window
Close Serial
Initialize
Counter Reset
REW
OK
CANCEL
00:10:04:28F
Exit
IN/OUT
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
ⅷ POSSIBLE CAUSE
Ⅵ CORRECTIVE ACTION
MESSAGE
––
Error
This application will
––
ⅷ The COM port used for the JLIP connector is not
selected, or the COM port is selected but the
connection is wrong.
Ⅵ Check the connected COM port and select it on the
"Serial Port Selection" screen (੬ pg. 46).
close.
Check devices
that power is ON.
Confirm
No devices detected to
connect.
Power ON all devices in
system.
ⅷ Power is not supplied or the connection is wrong.
Ⅵ Connect the devices correctly and turn them on
(੬ pg. 42, 43).
Communication error
(&H (number))
Check cable connection.
ⅷ Device is not turned on or cable is disconnected.
Ⅵ Connect the device correctly and turn it on
(੬ pg. 42, 43).
Ⅵ If device was turned off and on again during
operation, click "OK". All devices should function
properly.
Select the device to control.
ⅷ The line where the name of the device to use
appears is not clicked.
Ⅵ Click on it and "OK" (੬ pg. 47).
No video cassette!!
Load a video cassette to ID
(number).
ⅷ The video cassette is not loaded in the camcorder.
When the video cassette is removed during
operation, this message appears.
Ⅵ Insert the video cassette into the camcorder.
Invalid entry in scene
ⅷ The value of the CUT OUT point is smaller than
the CUT IN point's.
Ⅵ Set the value of the CUT OUT point so that it is
larger than the CUT IN point's (੬ pg. 50, 54).
(number) (There is IN > OUT
condition). Correct the time
or delete the scene.
Select a number between 0
and 24.
ⅷ When correcting the CUT IN/OUT points, the
value you set differs from the original by over 25
frames.
Ⅵ Select integral number from 0 to 24 (੬ pg. 54).
Invalid frame number on drop
frame counter.
ⅷ Because the DV-format digital camcorder uses the
drop frame system, inputting frame 00 and 01 is
impossible.
Ⅵ Input frame value other than 00 or 01
(੬ pg. 48, 54).
The monitor displays of the application software illustrated in this manual may differ from
those you are actually viewing depending on the operating environment of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR SPECIFICATIONS
EN
JLIP VIDEO CAPTURE DOCKING STATION
Connectors
S-Video
(S2 output)
Video
: Output Y : 1.0 Vp-p, 75 ohms
C : 0.3 Vp-p, 75 ohms
: Input 1.0 Vp-p, 75 ohms (pin jack)
(CAPTURE INPUT (EXT.)/PRINTER connector)
: Output 1.0 Vp-p, 75 ohms (pin jack)
(VIDEO output connector)
: Output –8 dB, 1 kiloohm (pin jack)
: 3.5 mm dia., 4-pole, mini-head jack
(compatible with EIAJ RC-5325 plug)
: Mini DIN 8-pin
Audio
JLIP (x 2)
Digital
Multi-connector
Editing connector
DC output
: 34-pin
: 3.5 mm dia., 2-pole
: 5 V DC
Captured image sizes
Operating temperatures
Dimensions
: 768 x 552 pixels, 80 x 60 pixels
: 5 to 30° C
: 113W x 61H x 145D mm
: Approx. 395 g
Weight
Power supply
: 6.3 V DC
* E. & O. E. Design and Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
A
J
Arrange Index ................................. ੬ pg. 31
Automatic Capture (AUTO) ....... ੬ pg. 26, 28
JPEG................................................ ੬ pg. 29
M
B
Main Window................................. ੬ pg. 20
Memory button ............................... ੬ pg. 20
Menu bar .................................. ੬ pg. 20, 48
Bitmap ...................................... ੬ pg. 24, 29
C
O
Capture Mode................................. ੬ pg. 29
Change ID ................................ ੬ pg. 31, 62
COM Port ................................. ੬ pg. 18, 46
Counter reset .................................. ੬ pg. 30
Counter Value Change.................... ੬ pg. 30
Create New Folder ......................... ੬ pg. 32
Open JLIP (jlp) File ......................... ੬ pg. 34
Open Index .................................... ੬ pg. 33
Operate VCR ............................ ੬ pg. 23, 49
P
Picture Format ................................ ੬ pg. 29
Program Capture..................... ੬ pg. 26 – 27
D
Delete Index Image and Full Image
........................................................ ੬ pg. 31
Desktop Window................ ੬ pg. 20, 48, 56
Device Selection ............................ ੬ pg. 19
Dubbing ......................................... ੬ pg. 52
S
Save As JLIP (jlp) File ...................... ੬ pg. 35
Save Image As ................................ ੬ pg. 33
Setup Menu .............................. ੬ pg. 22, 25
Step by Step Capture ...................... ੬ pg. 25
Save Index ...................................... ੬ pg. 33
E
Edit Menu ....................................... ੬ pg. 22
Exit (Close)...................................... ੬ pg. 17
T
Transfer Rate ................................... ੬ pg. 18
F
Field Picture ................................... ੬ pg. 29
File Menu ....................................... ੬ pg. 22
Frame Picture ..................... ੬ pg. 21, 29, 48
Full image data ............................... ੬ pg. 21
V
Video Capture......................... ੬ pg. 24 – 28
Video Printer........................... ੬ pg. 58 – 60
W
H
Window Menu................................ ੬ pg. 20
Help Menu ............................... ੬ pg. 23, 49
I
Index image ........................ ੬ pg. 21, 26, 28
Index image data ............................ ੬ pg. 21
Initialize ................................... ੬ pg. 18, 46
Input button .................................... ੬ pg. 20
Install ........................................ ੬ pg. 15, 45
Interval Capture .............................. ੬ pg. 28
IRQ ................................................. ੬ pg. 37
Download from Www.Somanuals.com. All Manuals Search And Download.
|