DV300H-JN.BUSAJJ2_ENG_MFL62178452
DVD PLAYER
XV-N680B
XV-N682S
LVT2008-029A
[UJ]
INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION:
•
The STANDBY/ON button does not completely
shut off mains power from the unit, but switches
operating current on and off.
•
When moving the product, press STANDBY/ON to
turn off the power, and wait at least 30 seconds
before unplugging the power cord. Then, wait at
least 2 minutes before moving the product.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
•
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by
a newspaper or cloth, etc., the heat may not be
able to get out.)
• Do not place any naked flame sources, such as
lighted candles, on the apparatus.
• When discarding batteries, environmental
problems must be considered and local rules or
laws governing the disposal of these batteries
must be followed strictly.
• Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
• Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
®
As an E
S
Partner, JVC
NERGY TAR
has determined that this product or
product models meet the E
NERGY
®
S
guidelines for energy
TAR
efficiency.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction . . . . . . . . . . . . . . . . . .5-8
Operation . . . . . . . . . . . . . . .16-21
General Features . . . . . . . . . . . . . . . . . . . . . .16
Additional Features . . . . . . . . . . . . . . . . . . . .17
Playing an Audio CD or MP3/WMA file . . . . .18
Programmed Playback . . . . . . . . . . . . . . . . .19
Repeat Programmed Tracks . . . . . . . . . . . .19
Erasing a Track from Program List . . . . . . .19
Erasing the Complete Program List . . . . . .19
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .20
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .20
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .20
Moving to another file . . . . . . . . . . . . . . . . .20
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rotating the picture . . . . . . . . . . . . . . . . . .20
About the
Symbol Display . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Handling Discs . . . . . . . . . . . . . . . . . . . . . . .5
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control operation . . . . . . . . . . . . . .8
Remote Control Battery installation . . . . . . . .8
Listening to MP3/WMA music
while watching picture . . . . . . . . . . . . . . . .20
Installation and Setup . . . . . . . . .9-15
Playing a MPEG4 Movie file . . . . . . . . . . . . .21
Playing a DVD VR format Disc . . . . . . . . . . .22
Setting up the Player . . . . . . . . . . . . . . . . . . . .9
DVD Player Connections . . . . . . . . . . . . . .9-10
Video and Audio Connections to Your TV . . .9
Resolution setting . . . . . . . . . . . . . . . . . . . . .9
HDMI connection . . . . . . . . . . . . . . . . . . . .10
Audio Connection to Optional Equipment . .11
When you turn on for the first time . . . . . . . .12
Displaying Disc Information on-screen . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . .12-14
General Operation . . . . . . . . . . . . . . . . . . .12
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .13
• Menu Language . . . . . . . . . . . . . . . . . .13
• Disc Audio / Subtitle / Menu . . . . . . . . .13
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .13
• TV Aspect . . . . . . . . . . . . . . . . . . . . . .13
• Display Mode . . . . . . . . . . . . . . . . . . . .13
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• Dolby Digital / DTS / MPEG . . . . . . . . .14
• Sample Freq. (Frequency) . . . . . . . . .14
• DRC (Dynamic Range Control) . . . . . .14
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . .14
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .15
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . .15
• B.L.E. (Black Level Expansion) . . . . . .15
Reference . . . . . . . . . . . . . . . . . .23-26
Remote Control Function . . . . . . . . . . . . . . . . . . .23
Maintenance and Service . . . . . . . . . . . . . . . .24
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
Notes on Discs
Handling Discs
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Symbol Used in this Manual
Note:
Cleaning Discs
Indicates special notes and operating features.
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
ALL
All discs and file listed below
DVD
DVD and finalized DVD R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
MP3 files
WMA
WMA files
MPEG4
MPEG4 files
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional Code
DVD
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labeled as the
same as the rear of the unit or “ALL”.
(8 cm / 12 cm disc)
Video CD (VCD/SVCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
Audio CD
(8 cm / 12 cm disc)
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or the
disc cannot play.
In addition, this unit plays DVD R/RW and CD-R/RW,
Dual disc that contains audio titles, MPEG4, MP3,
WMA, and/or JPEG files.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
This indicates a product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
The Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs
may not be played on the unit.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
• This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d
e
f
g
h
i
a 1/' STANDBY/ON
f N (PLAY)
Switches the unit ON and OFF.
Starts playback.
b Disc Tray
g x (STOP)
Insert a disc here.
Stops playback.
h . (SKIP)
c Z (OPEN/CLOSE)
Opens or closes the disc tray.
Returns to the beginning of current chapter or
track or go to the previous chapter or track.
Press and hold the button for search backward.
d Display window
Shows the current status of the unit.
i > (SKIP)
e Remote Sensor
Go to the next chapter or track.
Press and hold the button for search forward.
Point the remote control here.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DISPLAY
STANDBY/ON (1/')
Accesses On-Screen Display.
Switches DVD Player ON and OFF.
DVD MENU
Accesses menu on a DVD disc.
OPEN/CLOSE (Z)
Opens and closes the disc tray.
b / B / v / V (left/right/up/down)
Selects an item in the menu.
ENTER (
Confirms menu selection.
)
PAUSE/STEP ( X )
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
SETUP
Accesses or removes Setup menu.
SKIP (. / >)
Go to next chapter or track.
Returns to the beginning of current
chapter or track or go to the
previous chapter or track.
RETURN (O)
Displays the menu of a video CD
with PBC.
STOP (x)
Stops playback.
AUDIO (
Selects an audio language or an
)
SCAN (m / M)
Search backward or forward.
audio channel.
PLAY (N)
Starts playback.
SUBTITLE (
)
Selects a subtitle language.
0-9 numerical buttons
Selects numbered items in a menu.
ANGLE (
Selects a DVD camera angle,
if available.
)
PROGRAM
Enter to program edit mode.
CLEAR
Removes a track number on the
Program List or a mark on the
Marker Search menu.
ZOOM
Enlarges video image.
MARKER
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
TITLE
Displays title menu, if available.
RESOLUTION
You can change the resolution
depending on your TV.
Remote Control operation
Point the remote control at
the remote sensor and press
the buttons.
Remote Control Battery
installation
Detach the battery
REPEAT
Repeats chapter, track, title or all.
cover on the rear
of the remote
control, and insert
two batteries (size
AAA) with 3 and
# aligned
RANDOM
Plays tracks in random order.
Cautions:
A-B
• Do not mix old and new
batteries and never mix
different types of batteries
such as standard, alkaline,
etc.
Repeats sequence from point A to
point B.
correctly.
• Do not put the batteries in
the place where young
children can reach.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
Progressive Scan
Setting up the Player
• If your television is a high-definition or “digital
ready” television, you may take advantage of
the DVD player’s progressive scan output for
the highest possible video resolution.
• Progressive scan does not work with the
analog video connections (yellow VIDEO
OUTPUT jack and S-VIDEO OUTPUT jack).
• The 1080p, 720p and 480p resolutions are the
progressive scan applied resolution.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
DVD Player Connections
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
Resolution setting
information.
1. Press RESOLUTION once. The current resolution
setting will be appears in the display window.
2. Press RESOLUTION repeatedly to change the
resolution you want.
Rear of TV
The available resolution according to the connections
are as shown below.
Available Resolution
OUTPUT CONNECTION
1920 x 1080p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
HDMI
VIDEO OUTPUT
1920 x 1080p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
COMPONENT
VIDEO OUTPUT
Rear of
DVD Player
720 x 480i
720 x 480i
VIDEO OUTPUT
S-VIDEO OUTPUT
Video and Audio Connections
to Your TV
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
S-Video – Connect the S-VIDEO OUTPUT jack on
the DVD Player to the S-Video in jack on the TV
using the S-Video cable (S).
Notes:
• VIDEO OUTPUT and S-VIDEO OUTPUT is always
at 480i standard resolution.
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the
resolution that your TV can accept.
Video – Connect the VIDEO OUTPUT jack on the
DVD player to the video in jack on the TV using
the video cable (V).
Audio – Connect the left and right AUDIO OUTPUT
jacks of the DVD Player to the audio left and right IN
jacks on the TV using the audio cables (A).
Do not connect the DVD Player’s AUDIO OUTPUT
jack to the phone in jack (record deck) of your
audio system.
• For 720p, 1080i and 1080p resolution on the
component video out, only non-copy protected
discs can be played back. If the disc is copy
protected, it will be displayed at the 480p resolution
without HDMI cable connection. With HDMI cable
connection, the picture may not be displayed
properly.
Component Video – Connect the COMPONENT /
PROGRESSIVE SCAN OUTPUT jacks on the DVD
Player to the corresponding jacks on the TV using
an Y PB PR cable (C).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI connection
If you have an HDMI TV or a monitor, you can
connect it to this player using an HDMI cable.
HDMI compatible TV
1. Set the TV’s source to HDMI (refer to TV Owner’s
manual).
2. Connect the HDMI OUTPUT jack on the unit to the
HDMI jack on a HDMI compatible TV or
monitor (H).
3. Press RESOLUTION repeatedly to select the
desired resolution.
Notes:
• Both PCM and Bitstream Audio out is available
when the sample frequency is set to 48kHz in HDMI
connection.
Rear of DVD player
About HDMI
• If Audio setup is set to bitstream and your TV does
not support Bitstream Audio out in HDMI
connection, audio sound may not be outputted or
distorted.
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High-bandwidth Digital Content Protection).
HDCP is used to protect digital content transmitted
and received.
• When the no sound or noisy sound are outputted
with HDMI connection, set the Audio option [Dolby
Digital, DTS or MPEG] in SETUP menu to PCM or
Off.
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
player.
HDMI has the capability to support standard,
enhanced or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
DTVs.
• If there is noise or lines on the screen, please
check the HDMI cable.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
• Not all HDCP-compatible DVI devices will work with
this unit.
• If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
• If the abnormal picture appears on the TV screen,
turn off the unit and then turn the unit on again.
Tip:
When you use HDMI connection, you can change the
resolution (480i, 480p, 720p, 1080i, 1080p) for the
HDMI output.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUTPUT jacks on the DVD player to
the audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Audio Connection to Optional
Equipment
Connect the DVD player to your optional equipment
for audio output.
Rear of DVD Player
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player’s DIGITAL
AUDIO OUTPUT jacks (OPTICAL O or COAXIAL X)
to the corresponding jack on your amplifier. Use an
optional digital (OPTICAL O or COAXIAL X) audio
cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the
audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
Notes:
• If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
produces a strong, distorted sound or no sound at
all.
Amplifier (Receiver)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
Manufactured under license under U.S. Patent
#: 5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Out are
registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
©1996-2007 DTS, Inc. All Rights Reserved.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
When you turn on for the first
time
The menu for a language selection will appear when
you turn on the unit for the first time. You must select
a language to use the unit. Use b / B / v / V to select
a language then press ENTER and the confirm menu
will appear. Use b / B to select [Enter] then press
ENTER.
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 13 to 15.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status.
General Operation
1. Press SETUP.
The Setup menu appears.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
• Title (Track) – Current title (or track).
number/total number of titles (or tracks).
• Chapter – Current chapter number/total number
of chapters.
3. Use v / V to select the second desired option and
then press B to move to the third level.
• Time – Elapsed playing time.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection.
• Audio – Selected audio language or channel.
• Subtitle – Selected subtitle.
Some items require additional steps.
• Angle – Selected angle/total number of angles.
5. Press SETUP or PLAY (N) to exit the Setup
menu.
Note:
If any button is not pressed for a few seconds, the on-
screen display disappears.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
LANGUAGE
TV Aspect
Menu Language
4:3 – Select when a standard 4:3 TV is connected.
Select a language for the Setup menu and the
on-screen display.
16:9 – Select when a 16:9 wide TV is connected.
Disc Audio / Subtitle / Menu
Display Mode
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
Original – Refers to the original language in which
the disc was recorded.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 24. If you enter the
wrong language code, press CLEAR.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
Off (for Disc Subtitle) – Turn off Subtitle.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Sample Freq. (Frequency)
AUDIO
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Check the documentation for your amplifier to verify
its capabilities.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound.
Dolby Digital / DTS / MPEG
Bitstream – Select “Bitstream” if you connect this
unit’s DIGITAL AUDIO OUTPUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
Set DRC to On for this effect.
Vocal
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital, MPEG will be
automatically downmixed to two-channel PCM
audio.
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
Off (for DTS) – If you select “Off”, the DTS signal
is not output through the DIGITAL AUDIO
OUTPUT jack.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played in the same
way as Audio CDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures.
Set your preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Note:
The B.L.E. function works NTSC system only.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
General Features
Discs
Buttons
Operations
ALL
OPEN/CLOSE (Z)
PAUSE/STEP (X)
Opens or closes the disc tray.
During playback, press PAUSE/STEP (X) to pause
ALL
playback.
Press PAUSE/STEP (X) repeatedly to play Frame-by-
Frame.
DVD
VCD
MPEG4
SKIP (. / >)
SCAN (m / M)
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
DVD
MP3
VCD
MPEG4
ACD
WMA
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD, MPEG4 disc : 4 steps
DVD
MP3
VCD
MPEG4
ACD
WMA
Video CD, MP3/WMA, Audio CD : 3 steps
While the playback is paused, press SCAN (m or M
repeatedly to play in slow motion.
DVD : 4 steps
)
DVD
VCD
MPEG4
Video CD, MPEG4 : 4 steps (Forward only)
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD : Chapter/Title/Off
DVD
MP3
VCD
MPEG4
ACD
WMA
Video CD, Audio CD, MPEG4, MP3/WMA discs : Track/All/Off
A-B
Press the A-B button one at a time to select a point A and
point B and repeats a sequence from point A (Starting
point) to point B (End point).
DVD
VCD
VCD
ACD
MPEG4
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (3 steps).
DVD
MPEG4
You can move through the zoomed picture using
b / B / v / V buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or in stop mode, press RANDOM for
random playback.
ACD
DVD
MP3
WMA
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
DVD
DVD MENU
The disc menu appears on the screen.
ANGLE (
)
During playback of DVD disc that contains scenes
recorded at different camera angles, press ANGLE (
repeatedly to select a desired angle.
)
DVD
DVD
MPEG4
MPEG4
SUBTITLE (
AUDIO (
)
During playback, press SUBTITLE (
select a desired subtitle language.
) repeatedly to
VCD
)
During playback, press AUDIO (
) repeatedly to hear
a different audio language, audio channel or encoding
method.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
VCD 1.1
ACD
Notes on general features:
Last Scene Memory
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 15).
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
Note:
• When you are playing a DVD disc that contains
scenes recorded at different camera angles, the
angle indicator will be displayed on the TV screen
during the operations as an indication that angle
switching is possible.
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
Screen Saver / Auto Power Off
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
Additional Features
DVD
VCD
MPEG4
Time Search
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm.
Playback starts from the selected time.
DVD
VCD
MPEG4
Marker Search
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 9 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ID3 TAG
Playing an Audio CD or
MP3/WMA file
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Title, Artist, Album, Year, Comment ]
This unit can play Audio CDs or MP3/WMA files.
Tips:
• If you are in a file list and want to return to the
previous Folder list, use v / V buttons to highlight
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media or
Audio CD, a menu appears on the TV screen.
Use v / V to select a track/file and then press
PLAY (N) or ENTER and playback starts.
You can use variable playback functions.
Refer to page 16-17.
and press ENTER.
• Press DVD MENU to move to the next page.
• On a DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 22 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 256 kbps (WMA)
• The player cannot read an MP3/WMA file that has
a file extension as non than “.mp3” / “.wma”.
• CD-R/RW, DVD R/RW Format: ISO 9660
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files in a folder should be less
than 650 files.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Programmed Tracks
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
Press REPEAT to select a desired repeat mode.
• TRACK: Repeats the current track.
• ALL: Repeats all the tracks on programmed list.
• Off (No display): Does not play repeatedly.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
Note:
If you press SKIP (>) once during Repeat Track
E
2. Press PROGRAM and the
mark will appear.
playback, the repeat playback cancels.
Note:
Press PROGRAM again to exit the program edit
E
mode, then the
mark will disappear.
Erasing a Track from Program List
3. Select a track on the “List” and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
E
1. During stop mode, press PROGRAM and the
mark will appear
2. Use b / B / v / V to select the track that you wish
4. Use b / B / v / V to select the track you want to
to erase from the Program list.
start playing on the “Program” list.
3. Press CLEAR. Repeat step 1-3 to erase additional
tracks on the list.
5. Press PLAY (N) or ENTER to start.
Playback begins in the order in which you
programmed the tracks. Playback stops after the
last track on the “Program” list have played.
6. To resume normal playback from programmed
playback, select a track on the list and then press
PLAY (N).
Erasing the Complete Program List
E
1. During stop mode, press PROGRAM and the
mark will appear
2. Use b / B / v / V to select “Clear All” and then
press ENTER.
Note:
The programs are also cleared when the power is
off or the disc is removed.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
Viewing a JPEG file
During watching pictures, press ZOOM to enlarge the
video image (3 steps). You can move through the
zoomed picture using b / B / v / V buttons.
This unit can play JPEG files.
1. Insert a JPEG files recording media.
The PHOTO menu appears on the TV screen.
Rotating the picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
Listening to MP3/WMA music while watching
picture
1. Insert the disc containing the two types of file in
the player.
2. Press TITLE to display the PHOTO menu.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
Playback starts.
5. To return to the PHOTO menu while watching
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY (N).
4. To return to the PHOTO menu while watching
pictures, press STOP (x).
pictures, press STOP (x).
Tip:
To listen to only the desired music while watching
picture, program the desired files from the “MUSIC”
menu and then proceed as above.
Tips:
• If you are in a file list and want to return to the
previous Folder list, use v / V buttons to highlight
JPEG disc compatibility with this player is
limited as follows:
and press ENTER.
• Press DVD MENU to move to the next page.
• There are three Slide Speed options:
>>> (Fast), >> (Normal) and > (Slow).
• Photo size: Less than 5 MB recommended
• Depending upon the size and the number of
JPEG files, it could take a long time for the DVD
player to read the disc’s contents. If you do not
see an on-screen display after several minutes,
some of the files may be too large — reduce the
resolution of the JPEG files to less than 5 million
pixels and burn another disc.
Use b / B / v / V to highlight
. Then, use b / B
to select the option you want to use.
• On a DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
• The total number of files in a folder should be less
than 650 files.
• While watching a picture, press RETURN (O) to
hide the help menu.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
Slide Show
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
Use b / B / v / V to highlight the
then press ENTER.
(Slide Show)
• CD-R/RW, DVD R/RW Format: ISO 9660
Still Picture
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
1. Press PAUSE/STEP (X) during slide show.
The player will now go into pause mode.
2. To return to the slide show, press PLAY (N) or
press PAUSE/STEP (X) again.
• File names without “.jpg” extension will not be
able to be read by this unit. Even though the files
are shown as JPEG image files in Windows
Explorer.
Moving to another file
Press SKIP (. or >) or cursor (b or B) once
during viewing a picture to advance to the next or
previous file.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a MPEG4 Movie file
This unit can play MPEG4 files.
MPEG4 disc compatibility with this player is
limited as follows:
• Available resolution size of the MPEG4 file is
under 720x576 (W x H) pixel.
1. Insert a MPEG4 file recording media.
The MOVIE menu appears on the TV screen.
• The file name of the MPEG4 subtitle is available
by 56 characters.
• The total number of files in a folder should be less
than 650 files.
• CD-R/RW, DVD R/RW Format: ISO 9660
• If there is impossible code to express in the
MPEG4 file, it may be displayed as “ _ ” mark on
the display.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2. Press v / V to select a folder, and press
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
ENTER. A list of files in the folder appears.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY (N).
You can use variable playback functions.
Refer to page 16-17.
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
MPEG4 have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
4. Press STOP (x) to stop the playback.
The MOVIE menu appears.
Tips:
• If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
Playable MPEG4 file
remote to highlight
and press ENTER.
.avi, .mpg, .mpeg
• Press DVD MENU to move to the next page.
• This unit does not support the DivX file.
• On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
• The disc subtitle may not be displayed properly, if a
MPEG4 subtitle is downloaded through the internet.
• If the Disc Subtitle setup menu does not have the
MPEG4 subtitle language you are going to play, the
subtitle may not be displayed properly.
DVD Subtitle System(*.txt)
VobSub(*.sub): Sub/idx, stream based format
Notice for displaying the MPEG4 subtitle
Playable Audio format
If the subtitle does not display properly, please follow
the steps below.
“Dolby Digital”, “PCM”, “MP3”, “WMA”, DTS
• Sampling frequency: within 8 - 48 kHz (MP3),
within 22 - 48 kHz (WMA)
• Bit rate: within 8 - 320 kbps (MP3),
32 - 256 kbps (WMA)
1. During playback, press and hold SUBTITLE (
for about 3 seconds. The language code will
appear.
)
• Not all the WMA Audio format is compatible with
this unit.
2. Press b / B to select another language code until
the subtitle is displayed properly.
Notes on MPEG4 format
3. Press ENTER.
The “This file has the non-supported type on the
player. Please movie into browser and select the
other file.” will appear if this unit does not support the
MPEG4 file.
Note:
The MPEG4 subtitle file name has to be identified with
the MPEG4 file name to display by this unit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
This unit will play DVD-RW disc that is recorded
using the Video Recording (VR) format.
1. Insert a disc and close the tray.
The DVD-VR menu appears on the TV screen.
2. Press v / V to select a title then press
PLAY (N) or ENTER and playback starts.
3. Press DVD MENU to move to the list menu.
Notes:
• This unit will play DVD-R/RW disc that is recorded
using the DVD-Video format that have been
finalized using a DVD-recorder. Unfinalized DVD-
R/RW discs cannot be played in this player.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Remote Control Function
Maintenance and Service
Refer to the information in this chapter before
contacting a service technician.
Remote Control C1/C2/C3 Code Switching
This unit is initially set to C3 code (JVC DVD
PLAYER code). You can easily change the
Remote Control code to C1 (JVC VCR code), C2
(JVC DVD RECORDER code) or C3 as shown
below.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
STANDBY/ON
x
• Do not use volatile liquids such as insecticide spray
near the unit.
• Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
ENTER
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
1-3
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
• Keep pressing ENTER down during step 1.
1. Press the number Key “1” for C1, “2” for C2 or
“3” for C3 to change the remote control code.
2. Press STANDBY/ON (1/\) to turn on the unit.
3. Press x on the unit for over 5 seconds while the
unit is turned on. The code currently set appears
on the front display panel.
4. Press ENTER on the remote control to change the
unit's code. The code currently set on the remote
control is displayed on the front display panel for
approximately 5 seconds, and is applied to the
unit.
Note:
If you change the batteries of the Remote Control with
C1 or C2 code, the remote control code is set to C3
automatically. In this case, you should reset the
remote control code described above.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Rhaeto-Romance 8277
Rumanian
Russian
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Sanskrit
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check the disc indicator
in the display window is lit.)
The power is on, but
the DVD player does
not work.
• Your TV does not accept the
resolution that you set on the unit.
• Please read TV’s owner’s manual then
use RESOLUTION button to set the
resolution that your TV can accept.
No picture.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
• The power of the equipment
connected with the audio cable is
turned off.
• Turn on the equipment connected with
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the AUDIO option to the correct
position, then turn on the DVD player
again by pressing STANDBY/ON.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and regional code.)
The DVD player does
not start playback.
• The remote control is not pointed at
the remote sensor on the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
The remote control
does not work properly.
• The remote control is too far from the
DVD player.
• Operate the remote control closer to
the DVD player.
• The current remote control code does
not match the unit.
• Identify the remote control code with
the code of unit. (See page 24).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements:
Power consumption:
Dimensions (Approx.):
Net weight (Approx.):
Operating temperature:
Operating humidity:
AC 110-240 V ~ 50/60 Hz
9 W
430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot
1.5 kg (3.3 lbs)
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
Outputs
VIDEO OUTPUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
S-VIDEO OUTPUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUTPUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUTPUT (Video/Audio):
AUDIO OUTPUT:
19 pin (HDMI standard, Type A)
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL AUDIO OUTPUT:
COAXIAL: 0.5 V (p-p), 75 Ω, RCA jack x 1
OPTICAL: 3 V (p-p), Optical jack x 1
System
Laser:
Semiconductor laser, wavelength 650 nm
NTSC
Signal system:
Frequency response:
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio:
Harmonic distortion:
Dynamic range:
More than 90 dB (ANALOG OUT connectors only)
Less than 0.02%
More than 95 dB (DVD/CD)
Accessories
Video cable (1), Audio cable (1), Remote control (1), Batteries (2)
Note: Design and specifications are subject to change without prior notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
27
Download from Www.Somanuals.com. All Manuals Search And Download.
0309SKMLGEEGL
EN
P/N: MFL62178452
Download from Www.Somanuals.com. All Manuals Search And Download.
|