DVD DIGITAL CINEMA SYSTEM
SYSTEMA DVD DIGITAL CINEMA
TH-A10
Consists of XV-THA10, SP-PWA10, SP-XCA10, and SP-XSA10.
Consta de XV-THA10, SP-PWA10, SP-XCA10, y SP-XSA10.
SP-XSA10
SP-XCA10
SP-XSA10
SP-PWA10
XV-THA10
VIDEO CD
INSTRUCTIONS
For Customer Use:
INSTRUCCIONES
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0516-006A
[ 4U ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started ........................................................................................... 2
Important cautions ........................................................................ 2
Safety precautions......................................................................... 2
Checking the supplied accessories................................................ 2
System outline ............................................................................................ 3
Installation .................................................................................................. 4
To attach non-slip rubbers to the center speaker........................... 4
To hang satellite speakers from the wall ....................................... 4
About discs ................................................................................................. 5
Playable disc types........................................................................ 5
Disc structure ................................................................................ 5
Video CDs or SVCDs with Playback Control function ................ 5
Connections ................................................................................................ 6
Connecting the FM and AM antennas .......................................... 6
To connect the powered sub woofer ............................................. 6
Connecting the TV ........................................................................ 6
VIDEO OUT SELECT ................................................................. 7
To connect speakers ...................................................................... 7
Connecting Audio/Video Components ......................................... 8
Connecting the power cord ......................................................... 10
Putting batteries in the remote control ........................................ 10
Parts Identification .................................................................................. 11
Principles of operation ........................................................................... 13
Operation with the remote control .............................................. 13
To operate via the on-screen menu ............................................. 14
Preventing screen burn-out with the screen saver
[SCREEN SAVER] ................................................................. 15
Basic operations ...................................................................................... 16
To turn the system power supply ON and OFF (standby) .......... 16
To turn TV power ON and OFF .................................................. 16
Adjusting volume........................................................................ 16
Muting the sound ........................................................................ 17
Selecting the source to play ........................................................ 17
Changing the source name .......................................................... 17
Selecting the analog or digital input mode ................................. 18
Changing the decode mode......................................................... 18
Adjusting the Input Signal Level ................................................ 19
Sub woofer volume control and phase setting ............................ 19
Audio channel display lamp ....................................................... 19
Using the Sleep Timer ................................................................ 20
Using the DSP Modes................................................................. 20
Using the DVD player .............................................................................. 22
To play a disc .............................................................................. 22
Pausing ........................................................................................ 23
Fast forward and rewind ............................................................. 23
Locating the beginning ............................................................... 23
Resuming playback..................................................................... 24
Selecting playback from the DVD menu .................................... 24
Selecting the location to view from the video CD menu ............ 25
To specify the title or track number for playback ....................... 25
To play from the beginning of a title, chapter, or track .............. 26
To specify the chapter number for playback [CHAP. SEARCH] .. 26
To specify the time for playback [TIME SEARCH] .................. 26
To select the screen for playback from the digest screen
Selecting the Picture Character [THEATER POSITION] .......... 32
Repeating a current title, chapter or track, or all tracks
[REPEAT] ............................................................................... 32
Repeating a desired part [A-B REPEAT] ................................... 33
Sampling all tracks [INTRO] ...................................................... 33
Checking the Disc Time [TIME SELECT] ................................ 34
Programming the Playing Order of the Tracks [PROGRAM].... 34
Random Play [RANDOM] ......................................................... 35
Receiving radio broadcasts ................................................................... 36
Setting the AM tuner interval spacing ........................................ 36
Tuning in stations manually ........................................................ 36
Using preset tuning .....................................................................36
Selecting the FM reception mode ............................................... 37
Beat cut ....................................................................................... 37
Performing miscellaneous settings ..................................................... 38
AV amplifier settings on-screen display ..................................... 38
DVD settings on-screen display ................................................. 38
MAIN MENU Settings ............................................................................. 39
Opening the MAIN MENU ........................................................ 39
ON SCREEN LANGUAGE ....................................................... 39
Setting the SLEEP TIMER ......................................................... 39
Changing the DECODE MODE ................................................. 40
Changing the DSP MODE .......................................................... 40
Adjusting the volume .................................................................. 40
SOUND MENU Settings .......................................................................... 41
Opening the SOUND MENU ..................................................... 41
Adjusting the balance .................................................................41
Using LOUDNESS .....................................................................41
Adjusting input signal .................................................................42
Adjusting the sub-woofer output level........................................ 42
Adjusting the dynamic range ...................................................... 42
Adjusting the DSP effect ............................................................ 42
SPEAKER MENU Settings ....................................................................... 43
Opening the SPEAKER MENU ................................................. 43
Switching speaker mode .............................................................43
Playing a test tone ....................................................................... 44
Setting speaker size.....................................................................44
Setting speaker level ................................................................... 45
Adjusting delay time ................................................................... 45
DVD MENU Settings ................................................................................ 46
Opening the DVD MENU .......................................................... 46
Choosing menu language............................................................ 46
Choosing audio language............................................................ 47
Choosing subtitle language ......................................................... 47
On-screen guide settings .............................................................47
Select monitor type .....................................................................48
Screen saver settings ................................................................... 48
Limiting playback by children ............................................................... 49
To set Parental Lock for the first time [PARENTAL LOCK] ..... 49
To temporarily release the Parental lock..................................... 50
Care and handling of discs .................................................................... 51
How to handle discs .................................................................... 51
AV COMPU LINK Remote Control System............................................ 52
COMPU LINK Remote Control System.................................................. 54
Operating JVC’s Audio/Video Components ......................................... 55
Operating Other Manufacturers’ Video Equipment ........................... 57
Troubleshooting........................................................................................ 59
Specifications .......................................................................................... 60
Appendix A: Table of languages and their abbreviations ................ 61
Appendix B: Country code list for parental lock ................................ 62
[DIGEST]................................................................................ 27
To advance the picture one frame at a time ................................ 28
Slow-Motion Playback [SLOW]................................................. 28
To display Continuous Photos [STROBE] ................................. 28
Zooming a scene [ZOOM].......................................................... 29
Changing the Subtitle Language [SUB TITILE] ........................ 29
Changing the audio language or sound [AUDIO] ...................... 30
Changing the audio channel [AUDIO] ....................................... 30
Viewing from Multiple Angles [ANGLE] .................................. 31
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Important cautions
Checking the supplied accessories
Check to be sure you have all of the following items, which are
supplied with the unit.
The number in the parentheses indicates quantity of the pieces
supplied.
Installation of the unit
• Select a place which is level, dry and neither too hot nor too cold
between 5°C and 35°C (41°F and 95°F).
• Leave sufficient distance between the unit and the TV.
• Do not use the unit in a place subject to vibrations.
Power cord
• Do not handle the power cord with wet hands!
• A small amount of power (3 W) is always consumed while the
power cord is connected to the wall outlet.
• When unplugging the unit from the wall outlet, always pull the
plug, not the power cord.
To prevent malfunction of the unit
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the unit.
• Do not use any non-standard shape disc available on the market,
because it may damage the unit.
Batteries (4)
Secondary
remote
control (1)
Primary
remote
control (1)
• Do not use a disc with tape, seals, or paste on it, because damage
to the unit may result.
Note about copyright laws
• Please check the copyright laws in your country before recording
from DVD VIDEO, Audio CD, Video CD, and SVCD discs.
Recording of copyrighted material may infringe copyright laws.
AM Loop
Antenna (1)
FM Antenna (1)
Note about the copyguard system
• The DVD VIDEO disc is protected by the copyguard system.
When you connect the unit to your VCR directly, the coryguard
system activates and the picture may not be played back correctly.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
System Cable (1)
Compulink Cord (1)
Video Cable (1)
Speaker Cord 15 m (49.2 ft)
(2)
Speaker Cord 6 m (19.7 ft)
(3)
Safety precautions
Avoid moisture, water and dust
Do not place your unit in moist or dusty places.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it near a heating
device.
Satellite speaker
wall bracket (4)
Screws (4)
When you’re away
When away on travel or otherwise for an extended period of time,
remove the plug from the wall outlet.
Non-slip rubbers (3)
AC Power Cord (1)
Do not block the vents
Blocking the vents may damage the unit.
Care of the cabinet
When cleaning the unit, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents and disinfectants. These
may cause deformation or discoloring.
If water gets inside the unit
Turn off the power switch and remove the plug from the wall outlet,
then call the store where you made your purchase. Using the unit in
this state may cause a fire or electrical shock.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
System outline
This system consists of the center unit containing a DVD player, a radio, and a pre-amp, as well as the powered sub woofer, the center
speaker, and four satellite speaker units.
It provides a fully functional DVD theater system by simply connecting to a TV set.
Center speaker
(SP-XCA10)
Front left speaker
Satellite speaker
(SP-XSA10)
Front right speaker
Satellite speaker
(SP-XSA10)
TV
Rear left speaker
Rear right speaker
Satellite speaker
(SP-XSA10)
Satellite speaker
(SP-XSA10)
The center unit and
powered sub woofer are
connected with the system
cable.
The TV is connected to the center unit.
The center speaker and the
satellite speakers are
connected to the powered
sub-woofer.
Center unit
(XV-THA10)
Powerd sub woofer
(SP-PWA10)
Contains a DVD player, radio, and preamp (volume
control, tone control), together with a Dolby digital
decoder, DTS digital surround decoder and MPEG
Multichannel decoder for Dolby Surround, DTS Digital
Surround and MPEG Multichannel Surround effects.
For some music software, the DAP mode offers the
expanded sound field.
Only the most
This system is capable of most operations. As it is
illuminated it may also be used in the dark.
commonly used
functions for this
system are available.
It may also be used to operate JVC TVs, VCRs, MD
recorders, and cassette decks, as well as TVs and VCRs
from other manufacturers. Note that the remote control
unit must be programmed with the correct settings when
using products from other manufacturers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To attach non-slip rubbers to the center
speaker
To hang satellite speakers from the wall
Use the supplied bracket to fix satellite speakers to the wall.
Attach the supplied non-slip rubbers at three points on the bottom of
the center speaker.
CAUTION: ATTACHING THE BRACKETS ON THE WALL
When attaching the brackets on the wall, have them attached
to the wall by a qualified person.
DO NOT attach the brackets on the wall by yourself to avoid
an unexpected damage of their falling from the wall, caused
by incorrect attachment or weakness in the wall.
The non-slip rubbers are adhesive.
Peel off the seal before applying.
Location of attachment to wall:
Care is required in selecting a location for attaching satellite
speakers to the wall. Injury to personnel, or damage to
equipment, may result if the speakers are attached in a
location which interferes with daily activities.
Attach non-slip rubbers at the three
points shown in the diagram.
Attach two rubbers at left and right at
the front of the speaker, and one in the
middle at the rear.
Attaching speakers to the bracket ————————
1 cm (7/16”)
5 cm (2”)
Non-slip rubber
1.
Use the screw supplied to attach the speaker to
the bracket.
Front side
Bottom
Example ——————————————————
Satellite speaker
(front left speaker)
Center speaker
Bracket
Screw
TV
Powered
sub woofer
2.
Adjusting the angle of the satellite speakers
The angle of the speaker may be adjusted in the front-rear and
left-right directions along the channel in the bracket.
When adjusting the angle, loosen the screw slightly, make the
adjustment, and then tighten the screw firmly.
Center unit
Satellite speaker
(front right speaker)
Tilting the speaker to the front
Satellite speaker
CAUTION:
Satellite speaker
(rear left speaker)
(rear right speaker)
If the screw is not tightened
firmly, it may cause injury to
personnel or damage to
equipment.
The rear speakers are
placed behind the
listening position.
CAUTIONS:
• For safety reasons, always ensure that there is sufficient place
behind the powered sub woofer.
• If the front and rear speakers are placed on the floor, always
ensure that they are level.
Tilting left-right
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Playable disc types
Disc structure
Playable and non-playable disc types are as follows:
A DVD disc is comprised of “titles”, while an Audio CD, Video CD
or SVCD is comprised of “tracks”. Each title may be divided into
some “chapters”. For example, if a DVD disc contains some movies,
each movie, each movie may have its own title number, and each
movie may be divided into some chapters. In a DVD karaoke disc,
each song usually has its own title number and does not have
chapters. In general, each title has independent content, while each
chapter in the same title has continuity.
Playable discs ———————————————
VIDEO CD
Example: DVD disc
DVD VIDEO
Video CD
SVCD
Audio CD
The DVD Logo is a trademark.
Non-playable discs——————————————
• DVD-ROM
• CD-R
• DVD-RAM
• CD-ROM
• DVD-R
• PHOTO CD • CD-RW
• DVD-RW
• Playing back discs list as “Non-playable discs” above may
generate noise and damage speakers.
Example: Audio CD/Video CD/SVCD
Notes on DVD VIDEO discs
• DVD players and DVD VIDEO discs have their own Region Code
numbers. This unit only can play back DVD discs whose Region
Code numbers include the unit’s Region Code, which is indicated
on the region code symbol on the rear panel of the center unit.
Examples of playable DVD discs if the center unit’s Region Code is “2”:
Video CDs or SVCDs with Playback Control function
What is Playback Control function? ———————————————————————————————
The Playback Control function, allows you to enjoy menu-driven operation and high-resolution still images which have a resolution four
times greater than moving pictures.
• Menu-driven playback
You can interact with the screen using a menu display to select and play an entry.
• High-resolution still image display
You can display high-quality images four times clearer than moving pictures.
A selection menu is displayed when you
start playing a Video CD or SVCD disc with
the Playback Control feature. The selection
menu shows a list of numbers for selection.
Some discs may show moving pictures or a
divided screen.
1. When a list of numbers is displayed,
selecting a number shows its contents.
2. When “3” or “SELECT” is displayed on
the television screen, pressing this button
jumps to the specific picture.
3. When the selection menu is redisplayed after you have played your selection, selecting a number again replays its contents.
(Some discs may show the menu screen several times.)
When ¢ and 4 are shown, pressing “NEXT” or “PREV” can change the selection menu.
4. After playback, press RETURN to go back to the previous screen.
To stop playback, press STOP.
Note:
• When a menu is displayed for a long time (about ten minutes), the screen background automatically fades out to prevent screen burn-in
while the setting is suspended.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the FM and AM antennas
To connect the powered sub woofer
Use the supplied system cable to connect the powered sub woofer
(SP-PWA10).
FM antenna connections ———————————
Center unit (XV-THA10)
Ensure that the
£ mark on
the plug faces
upwards.
System
cable
(supplied)
A. Using the supplied FM antenna
The FM antenna provided can be connected to the FM 75 Ω
COAXIAL terminal as temporary measure.
Ensure that the £
mark on the plug
faces to the right.
B. Using the standard type connector (Not supplied)
A standard type connector should be connected to the FM 75 Ω
COAXIAL terminal.
Powered sub woofer (SP-PWA10)
CAUTION:
• Use the system cable provided for attaching the center unit and
the sub woofer.
Note:
• If reception is poor, connect the outdoor antenna.
Before attaching the 75 Ω coaxial cable (the kind with a round
wire going to an outdoor antenna), disconnect the supplied FM
antenna.
Connecting the TV
AM antenna connections ———————————
Connect the TV to view video images from the center unit.
S-video cable (not supplied)
Turn the loop until you have the best reception.
Connect to the TV if it has an S-video input
(for higher image quality). Connect the cables
with the £ mark facing down.
Center unit (XV-THA10)
To S-video
input
Notes:
• If the AM loop antenna wire is covered with
vinyl, remove the vinyl by twisting it as shown
in the diagram.
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. This could cause
poor reception.
• If reception is poor, connect an outdoor single vinyl-covered wire
to the AM EXT terminal. (Keep the AM loop antenna connected.)
To composite
video input
Video cable
(supplied)
Note:
• When connecting the TV to the TV SOUND/DBS jacks, DO NOT
connect the TV’S-video output to these video input terminals.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
VIDEO OUT SELECT
To connect speakers
This unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT on the rear
panel to match the color system of your TV in standby mode.
Make sure that the color system of DVD/Video CD/SVCD disc labeled on the package matches your TV.
Connect the satellite speakers and center speaker to the terminals on the powered sub-woofer using the speaker cords supplied.
Labels are attached to the speaker cords to indicate the speaker and terminal to which each is to be connected.
• The four satellite speakers may be used at either front or rear.
• Ensure that the left and right speakers are connected to left and right respectively, and that they are connected with the correct polarity
(+ve, –ve). The white speaker cord connects to the + terminal, and the black speaker cord connects to the – terminal.
Twist and remove the insulation
at the end of each speaker cord.
Conneceting the front speakers —————————
Connect the right speaker to the FRONT SPEAKERS RIGHT
terminal.
Connecting the rear and center speakers —————
Connect the right rear speaker to the REAR SPEAKERS RIGHT
terminals.
Connect the left speaker to the FRONT SPEAKERS LEFT terminal.
Connect the left rear speaker to the REAR SPEAKERS LEFT terminals.
Connect the center speaker to the CENTER SPEAKER terminals.
Front right speaker
Front left speaker
Center speaker
Speaker cord (6 m)
(19.7 ft)
White
White
Black
Black
Rear right speaker
Rear left speaker
Note:
• Mixing up the polarity of the
speaker cords can reduce the
stereo effect and sound quality.
Speaker cord
(15 m) (49.2 ft)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Video component connections —————————
Use the cable with RCA pin plugs (not supplied).
Connecting Audio/Video Components
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the composite video jack.
If your video components have S-video (Y/C-separation) terminals,
connect them using S-video cable (not supplied).
Connecting these video components through the S-video input/
output terminal will give you better picture playback (or recording)
quality.
You can connect the following audio/video components to this
system.
Refer also to the manuals supplied with your components.
Audio Components: Cassette deck or MD recorder*
Video Components: TV or DBS tuner*
VCRs
* You can connect these components using the methods described
in “Analog connections” (see below) or in “Digital connections”
(see page 9).
IMPORTANT
This system is equipped with both the composite video and S-video
input/output terminals for connecting video components.
You do not have to connect both the composite video and S-video
terminals.
However, remember that the video signals from the composite video
input terminals are output only through the composite video out
terminals, while the ones from the S-video input terminals are
output only through the S-video output terminals.
Analog connections —————————————
Analog component connections
Use the cable with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
Therefore, if a recording video component and a playing video
component are connected to the center unit through the different
video terminals, you cannot record the picture from the playing
component on the recording component. In addition, if the TV and a
playing video component are connected to the center unit through
the different video terminals, you cannot view the playback picture
from the playing component on the TV.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and the center unit, the
sound output through this system may be distorted.
Cassette deck or MD recorder
MD recorder
VCR
To audio input
To audio output
To left/right
channel audio
input
S-VHS (or VHS) VCR
To composit
video output
To composit
video input
To left/right
channel audio
output
To S-video
input
To S-video
output
To audio output
To audio input
Cassette deck
Notes:
• When the DSP mode is ON, the VCR OUT (REC) jack and the
TAPE/MD OUT (REC) jack will output surround sound to the
front speakers only.
When recording, turn the DSP mode OFF (see page 21).
• You can connect either a cassette deck or a MD recorder to the
TAPE/MD jacks. When connecting a MD recorder to the TAPE/
MD jacks, change the source name, which will be shown on the
display when selected as the source, to “MD”. See page 17 for
details.
If your audio components have a COMPU LINK-3 terminal
• See also page 54 for detailed information about the connection
and the COMPU LINK-3 remote control system.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV audio or DBS tuner
TV sound
DBS tuner
To audio output
TV
To S-video
output
To audio
output
To composite
video output
DBS tuner
Note:
• When connecting the DBS tuner to the TV SOUND/DBS jacks, change the source name, which will be shown on the display when
selected as the source, to “DBS”. See page 17 for details.
Digital connections —————————————————————————————————————
The center unit has three digital input terminals (one digital coaxial terminal and two digital optical terminals) and one digital output terminal
(a single digital optical terminal).
• The DVD and audio signals from the center unit, and the digital signals input from the digital input terminals, are output from the digital
output terminal.
IMPORTANT
• When connecting the DBS tuner using the digital terminal, you also need to connect it to the video jack (either composite video terminal
or S-video terminal) on the rear. Without connecting it to the video jack, you can view no playback picture.
• After connecting the components using the DIGITAL IN terminal, set the following correctly if necessary.
- Select the digital input mode correctly. For details, see “Selecting the analog or digital input mode” on page 18.
Notes:
• When you want to operate the MD
Before connecting a digital
recorder using the COMPU LINK remote
optical cable, unplug the
control system, connect the MD recorder
protective plug.
also as described in “Analog
connections” (see pages 8).
• When an MD record or other digital
sound recording device is connected to
the DIGITAL OUT OPTICAL terminal,
you will be unable to record signals in
Dolby Digital or DTS Digital Sound.
• The DIGITAL OUT OPTICAL jack does
not output DSP mode sound effects.
Do not change DSP mode during digital
recording.
When the component has a digital
coaxial output terminal, connect it
to the AUX COAXIAL terminal,
using the digital coaxial cable
(not supplied).
To digital output
(optical)
To digital output
(optical)
To digital output
(optical)
DBS tuner
Audio/Video control amplifier
MD recorder
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the power cord
Putting batteries in the remote control
Before plugging the center unit and powered sub-woofer into an AC
outlets, make sure that all connections have been made.
Before using the remote control, put two supplied batteries first.
When using the remote control, aim the remote control directly at
the remote sensor on the center unit.
Plug the power cord into an AC outlet.
The red STANDBY lamp on the center unit lights when the power
cord is plugged in.
Primary remote control
Keep the power cord away from the connecting cables and the antenna
cable. The power cord may cause noise or screen interference.
We recommend that you use a coaxial cable to connect the FM outdoor
antenna, since it is well-shielded against interference.
Center unit
Secondary remote control
Power sub woofer
1.
2.
3.
On the back of the remote control, remove the
battery cover.
AC power cord
Insert batteries. Make sure to match the polarity:
(+) to (–).
Connect to
AC outlet.
Replace the cover.
• If the range or effectiveness of the remote control decreases,
replace the batteries. Use two R6P (SUM-3)/AA (15F) type dry-
cell batteries.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord.
When unplugging the cord, always grasp the plug so as not to
damage the cord.
CAUTIONS:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:
(+) to (–).
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Notes:
• The preset settings such as preset channel and sound adjustment
may be erased in a few days in the following cases:
- When you unplug the power cord.
- When a power failure occurs.
• The speakers will not produce any sound if the powered sub woofer
power cord is removed from the AC outlet while the center unit is
turned on.
In this case power will not come on even when the powered sub-
woofer power cord is plugged in the AC outlet.
Light up the primary remote control buttons ————
The buttons on the primary remote control may be lit for a few
seconds for use in the dark.
Press
on the center unit, or
AUDIO on the remote control
to turn power on. This will turn the powered sub-woofer on and
sound will be emitted from the speakers.
Press LIGHT to illuminate
the buttons in red for a few
seconds.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Become familiar with the buttons and controls on the unit before use. Refer to the pages in parentheses for details.
Center unit ———————————————————————————————————————
Front panel
1
button and STANDBY
lamp (16)
1
2
3
4
2 Remote sensor (10)
3 Disc tray (22)
4 DVD CONTROL buttons
(22~24)
5 VOLUME +/ – button (16)
6 DSP MODE/INPUT ATT.
(19, 20, 21)
7 SURROUND/SOURCE
NAME (17, 21)
8 SOURCE (17)
9 Display window
p Audio channel lamp (19)
p
9
8 7 6
5
Display window
4
5
1
2
3
6
9 8
7
1 Decord mode indicator (18)
2 Radio indicator (36)
3 Multi-information window
Display time and status information.
4 Time selection indicator (34)
5 PROGRAM indicator (34)
6 RESUME indicator (24)
7 Radio reception mode indicator (37)
8 ATT. indicator (19)
9 DSP indicator (20)
Powered sub woofer —————————————————————————————————————
1 POWER ON lamp (16)
2 Speaker
1
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Remote controls ———————————————————————————————————————
Primary remote control
Secondary remote control
1
2
w
1
2
8
e
r
3
4
5
6
t
3
4
5
9
p
7
8
9
y
u
i
6
7
p
q
o
;
a
s
1 SLEEP button (20)
1 SLEEP button (20)
2 ANALOG/DIGITAL INPUT button (18)
3 TITLE button (24)
2 Source selecting buttons (17)
3 MENU button (24)
4 SUBTITLE button (29)
4 Cursor and ENTER buttons
5 THEATER POSITION button (31)
6 Operating buttons
5 MAIN ON SCREEN button (39)
6 DVD ON SCREEN button (26, 46)
7 MENU button (24)
7 VOLUME +/ – buttons (16)
8 Cursor and ENTER buttons
9 THEATER POSITION button (31)
p TV VOL +, – buttons (56)
q TV/VIDEO button (56)
8
buttons
AUDIO button (16)
TV button (56)
9 DVD ON SCREEN button (26, 46)
p DSP MODE button (21)
w
buttons
AUDIO button (16)
TV/CATV/DBS button (56)
VCR button (56)
e Source selecting buttons (17)
DVD, TV/DBS, VCR, TAPE/MD, AUX, FM/AM
r DVD operating buttons
RESUME (24)
RETURN (25)
ANGLE (30)
ZOOM (29)
DIGEST (27)
t Number buttons
y Remote control mode selector (55, 56)
u DSP MODE button (21)
i CHANNEL +/ – buttons (56)
o VOLUME +/ – buttons (16)
; MUTING button (17)
a Operating buttons
s LIGHT button (10)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Principles of operation
The system may be operated via the remote control or the buttons on the center unit, or via the menu on the screen.
Operation with the remote control
Select the appropriate mode for the remote control when using the primary or secondary remote control is used for operation.
The remote control mode is selected by pressing the source selecting buttons.
Press DVD
: The number buttons and operating buttons operate in the DVD mode, enabling operation of the DVD, audio CD,
Video CD, and SVCD.
Press FM/AM : The number buttons and operating buttons operate in the radio mode.
DVD button
DVD button
Source
selecting
buttons
Source
selecting
buttons
FM/AM button
FM/AM button
Number buttons
To operate this
center unit, set
it to “AUDIO/
TV/VCR”
(except when
selecting the
DBS tuner as
the source).
Operating
buttons
Operating
buttons
Note:
• Pressing the source selecting buttons on the remote control also
changes the remote control mode.
When using the remote control, always press the source selecting
buttons on the equipment to suit the appropriate remote control
mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Principles of operation
To operate via the on-screen menu
When using the on-screen menu, first display it and then use the primary or secondary remote control unit cursor buttons (2/3/5/∞), the
number buttons, and the ENTER button.
Displaying the on-screen menu —————————————————————————————————
The method and conditions for display differ with the on-screen menu. The individual functions are described below.
Number buttons
Cursor and ENTER
buttons
Cursor and ENTER
buttons
On-screen menu components
Basic operation with the on-screen menu —————
1. Move the pointer to the desired item using the remote control
buttons.
Referred to as a ”tag“.
• Use the 2/3 cursor to select a tag.
• Use the 5/∞ cursor to select an item.
2. Use the items.
• Use the 2/3 cursor to change the details of a selected item.
• Press ENTER to use the selected item.
• Follow the method of use explained in the message field.
• Use the number buttons to enter numerals.
Items
See each function description for details of use.
This arrow is referred to as a ”pointer“.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Principles of operation
On-screen menus ——————————————
This system supports the following on-screen menus.
On-screen menus for using discs ————————
The disc status and items are displayed as follows on the on-screen
menus for using the disc.
Opening screens
VCD CONTROL display
(for Video CD)
for DVD
(No disc inserted)
DVD CONTROL display
for Video CD/SVCD
for Audio CD
On-screen menus for using and setting up the AV amp function
VCD CONTROL display
(for SVCD)
CD CONTROL display
On-screen menus for setting up the DVD
Preventing screen burn-out with
the screen saver [SCREEN SAVER]
On-screen menus for using the disc
VCD CONTROL display
A television monitor screen may be
burned out if a static picture is displayed
for a long time. To prevent this, the unit
automatically activates the screen saver
function if a static picture, such as an
on-screen display or menu, is displayed
for over 5 minutes.
DVD CONTROL display
(for Video CD)
• Pressing any button on the unit or the remote control unit will
release the screen saver function and return to the previous
display.
• You can select one of several screen saver modes available (see
page 48).
VCD CONTROL display
(for SVCD)
CD CONTROL display
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The basic operations for this system are as follows.
To turn TV power ON and OFF
To turn the system power supply
ON and OFF (standby)
JVC TVs may be used as is with the primary and secondary remote
controls. TVs from other manufacturers require changes to the
transmittable signals before they can be used with the primary and
secondary remote controls. See page 57 for details of changing the
transmittable signals.
From the remote controls:
Primary remote control
Secondary remote control
From the remote controls:
Primary remote control
Secondary remote control
AUDIO
AUDIO
Press
AUDIO to turn power ON.
TV/CATV/DBS
TV
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
Press
TV/CATV/DBS (or
TV) to turn power ON.
The center unit
button and 0 button will light up blue.
Press
TV/CATV/DBS (or
TV) again to turn power OFF.
Press
AUDIO again to turn power OFF (standby).
The STANDBY lamp is lit.
Adjusting volume
On the front panel:
The volume level can be adjusted within the range of “0” (minimum)
to “80” (maximum).
STANDBY lamp
From the remote controls:
Primary remote control
Secondary remote control
Press
to turn power ON.
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
The center unit
button and 0 button will light up blue.
VOLUME + /–
VOLUME + /–
Press again to turn power OFF (standby).
The STANDBY lamp is lit.
On the front panel:
Notes:
• The powered sub-woofer power supply is linked to the center unit.
The green POWER ON lamp on the powered sub woofer lights
when power is turned on, and goes off when power is turned off.
• A small amount of power is consumed in the standby mode.
Remove both AC power cords from the AC outlets to turn the
center unit and powered sub woofer off completely.
VOLUME + /–
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
On the front panel:
Muting the sound
From primary remote control only:
MUTING
SOURCE
Press SOURCE until the source name you want appears
on the display.
Press MUTING to mute the sound through all speakers
connected.
The source changes as shown below each time the button is pressed.
“MUTING” appears on the display window and volume turns off.
= DVD = TAPE (or MD) = VCR = AM = FM =
TV SOUND (or DBS) = AUX = (back to the beginning)
To restore the sound, press MUTING again so that “OFF” appears
on the display.
• Pressing VOLUME +/– also restores the sound.
Changing the source name
When you have connected an MD recorder to the TAPE/MD jacks
or the DBS tuner to the TV SOUND/DBS jacks on the rear panel,
change the source name shown on the display window when you
select the MD recorder or DBS tuner as the source.
Selecting the source to play
Selected source name appears
On the front panel:
From the remote controls:
Primary remote control
Secondary remote control
1
2
1.
2.
When changing the source name from “TAPE “ to
“MD”:
Press SOURCE until “TAPE” appears.
When changing the source name from “TV SOUND”
to “DBS”:
Source selecting buttons
Source selecting buttons
Press one of the source selecting buttons.
DVD*
VCR
Select the DVD player.
Select the video component connected to the
VCR jacks.
Press SOURCE until “TV SOUND” appears.
TV/DBS
TAPE/MD*
AUX*
Select TV sounds or DBS tuner.
Select the cassette deck (or the MD recorder).
Select a component connected to the AUX jack.
Select an FM or AM broadcast.
Each time you press the button, the band
alternates between FM and AM.
Press and hold SOURCE NAME until “ASSGN. MD”
or “ASSGN. DBS” appears on the display window.
FM/AM*
To change the source name to “TAPE” or “TV SOUND”, repeat the
same procedure above — in step 1, select “MD” or “DBS” then
press and hold SOURCE NAME.
Notes:
Note:
• When connecting an MD recorder (to TAPE/MD jacks), and a
DBS tuner (to the TV SOUND/DBS jacks), change the source
name shown on the display window. For details, “Changing the
source name”.
Without changing the source name, you can still use the connected
components, there may be some inconvenience.
• “TAPE” or “TV SOUND” will appear on the display window
when you select the MD recorder or DBS tuner.
• You cannot use the digital input (see page 9) for the MD recorder
and the DBS tuner.
• When you press one of the source selecting buttons on the remote
control marked above with an asterisk (*), the system automatically
turns on.
• You cannot use the COMPU LINK remote control system (see
page 54) operate the MD recorder.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To return to analog audio
1. Select a digital source to return to analog audio.
Select from “MD DIGITAL”, “AUX DIGITAL”, or “DBS
DIGITAL”.
Selecting the analog or digital input
mode
When you have connected some components such as MD recorder, the
DBS tuner and so on, using digital terminals (see page 9), you need to
change the input mode for these components to the digital input.
You can choose digital sound from the following sources: “MD”,
“DBS”, “AUX”.
2. Press ANALOG/DIGITAL INPUT to select [ANALOG].
Analog audio is selected and the source name also returns to
analog.
Note:
From primary remote control only:
• When selecting a digital source, press ANALOG/DIGITAL
INPUT once to display the currently selected mode.
Changing the decode mode
2
From primary remote control only:
1
1
2
1.
Press the source selecting button (TAPE/MD, AUX,
or TV/DBS) for which you want to change the input
mode from analog input to digital input.
Example: Selecting MD recorder as the source for digital audio.
1.
2.
Press DVD to select DVD as the source.
Press ANALOG/DIGITAL INPUT to select the
decode mode.
The display changes as shown below each time the button is
pressed.
2.
3.
Press ANALOG/DIGITAL INPUT.
The display changes as shown below each time the button is
pressed.
= AUTO/PCM = DOLBY DGTL (DOLBY DIGITAL) = DTS
= (back to the beginning)
= AUTO/PCM = DOLBY DGTL (DOLBY DIGITAL) = DTS =
ANALOG = (back to the beginning)
AUTO/PCM
DOLBY DGTL
DTS
Optimized for all discs playable on this
system. (Default)
Select this mode when playing a disc
recorded in Dolby Digital Surround.
Select this mode when playing a DVD disc
recorded in DTS Surround.
Press ANALOG/DIGITAL INPUT to select
[AUTO/PCM].
The DTS decoder will be selected as the
internal decoder.
«
After approximately 3 seconds
MPEG
Select this mode when playing a disc
recorded in MPEG Multicahnnel Surround.
The MPEG decoder will be selected as the
internal decoder.
• The source name changes from “MD” to “MD DIGITAL”.
When to try changing the decode mode
When the decode mode is set to the default AUTO/PCM setting and
a DVD recorded in Dolby Digital Surround, DTS Digital Surround,
or MPEG Multichannel Surround is played, the internal decoder will
be automatically selected before audio playback begins. Depending
on the disc, this may result in a brief loss of audio after playback
starts. This is due to lost audio signals that were inputted during
internal decoder selection.
In these instances, lost audio can be prevented by manually selecting
the decode mode appropriate for the disc you wish to play.
However, please note that when the decode mode is set to other
than AUTO/PCM, you will be unable to playback audio from discs
recorded in a mode other than the set mode.
When other than [AUTO/PCM] is selected
When “DOLBY DGTL”, “DTS”, or “MPEG” is selected the source
name changes to digital (“MD” = “MD DIGITAL”) and audio is
not played.
The decode mode indicator “DOLBY DGTL”, “DTS”, or “MPEG”
in the display window flashes to indicate that the correct mode has
not been selected.
Example: Selecting “DOLBY DGTL” when listening to MD
with digital audio.
After changing the decode mode and playing back a disc, return the
decode mode to “AUTO/PCM”.
Changing the playback source will automatically set the decode
mode to “AUTO/PCM”.
Flashes
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
When a decode mode which differs from the type of
disc being played is selected
Insert a DVD disc in the center unit to display the type of audio
being played in the Decode mode indicator in the display window.
Audio cannot be played if a decode mode which differs from the
displayed mode is selected.
Sub woofer volume control and
phase setting
Use the VOLUME knob and PHASE button at the rear of the
powered sub woofer.
The selected decode mode flashes to indicate that the selected
decode mode does not allow audio playback.
VOLUME knob
Mark
Example: When DTS is selected as the decode mode for Dolby
digital audio.
PHASE button
Flashes
Adjusting the Input Signal Level
Volume control ———————————————
Turn the VOLUME knob.
When using the DSP mode effect during playback from an analog
device, the sound will occasionally be distorted due to a overly-
strong input signal. In these instances, it is possible to adjust the
level of the input signal. Only input signals from analog devices (TV
SOUND, VCR, TAPE, AUX, FM, AM, MD, DBS) may be adjusted
in this way.
Adjust to a volume appropriate for balance with the other speaker(s).
The mark indicates the volume position in normal use.
• Adjust when the volume from the sub-woofer is too high or too
low in relation to the volume from the front speaker.
Phase setting ————————————————
Play sound through the sub-woofer and adjust the
PHASE button to a position (_ REVERSE or — NORMAL)
at which the lowest frequency is heard best.
On the front panel only:
Note:
• Phase is closely related to the distance from the listening position
to the front speaker and sub woofer.
While listening, adjust until the lowest frequency is heard best.
Audio channel display lamp
1
Uses lamps to display the audio channel configuration for the disc
currently playing.
1.
Press and hold INPUT ATT. (DSP MODE).
Release the button when the display window shows “INPUT
ATT ON,” or “INPUT NORMAL.”
• The audio
channel display
lamp is not an
indicator of
Pressing and holding the INPUT ATT. button further cycles
through the following modes:
which speakers
are producing
sound.
INPUT NORMAL: Playback source without adjusting the input
signal level. This is the default setting.
J
INPUT ATT ON: Lower the input level and playback source.
The ATT mark will light up.
To change the input signal level, press and hold INPUT ATT.
until “INPUT NORMAL” or “INPUT ATT ON” is displayed.
The lamps refer to the speaker channel as follows.
L:
Left front speaker channnel
Notes:
R: Right front speaker channel
C: Center speaker channel
RS: Right surround speaker channel
LS: Left surround speaker channel
S: Rear speaker channel (monaural)
LFE: Sub woofer channel
• When in “INPUT ATT ON” mode, ATT will light up in the
display window. However, when the playback source is digital
(DVD, etc.) it will go off. Lighting up will resume if playback is
switched to an analog device.
• Even while in “INPUT ATT ON” mode, if the DSP mode is
turned off (“DSP OFF”), playback will continue without any
reduction of the input signal.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The lamp display indicates the type of disc (DVD or CD) currently
playing as follows.
Using the DSP Modes
The built-in Surround Processor provides two types of the DSP
(Digital Signal Processor) mode — Surround mode and DAP
(Digital Acoustic Processor) mode.
Example:
With Dolby digital 5.1 ch, DTS digital 5.1 ch, or MPEG Multichannel
5.1 ch surround
Surround modes ———————————————
With this system, you can use two types of the Surround mode.
Dolby Surround (Dolby Digital and Dolby Pro Logic)*
Used to watch the soundtracks of software encoded with Dolby
With Dolby digital (Lt/Rt *)
Digital (bearing the mark
(bearing the mark
) or with Dolby Surround
).
Dolby Digital and Dolby Pro Logic can be selected automatically
according to software played back.
DTS Digital Surround**
With stereo sound (eg Audio CD)
DTS Digital Surround is a discrete 5.1 channel digital audio format
available on CD and DVD software.
To watch the soundtracks of video software bearing the mark
the system can provide you with DTS Digital Surround decoder.
DTS Digital Surround is automatically selected according to
software played back.
,
* Lt/Rt refers to the downmix output when connected to a device
that uses Dolby Pro Logic.
MPEG Multichannel
MPEG Multichannel is another discrete 5.1 channel digital audio
Using the Sleep Timer
format available on DVD software, and uses encoding method called
MPEG2-Audio. (MPEG stands for “Motion Picture Expert Group”
and has been originally developed for compressing video signals.)
To watch the soundtracks of video software bearing the mark
, the center unit can provide you with MPEG
Using the Sleep Timer, you can fall asleep to music and know the
system will turn off by itself rather than play all night.
From the remote controls:
Multichannel decoder.
Primary remote control
Secondary remote control
Note:
• Change the decode mode from “AUTO/PCM” to “DTS” before
playing an audio CD recorded with DTS Digital Surround.
*
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro
Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat.
No. 5,451,942 and other world-wide patents issues and pending. “DTS”
and “DTS Digital Surround” are trademarks of Digital Theater Systems,
Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.
SLEEP
SLEEP
Press SLEEP repeatedly.
The shut-off time changes as follows (in minutes):
=10=20=30=60=90=120=150=OFF (Canceled)= (back to
the beginning)
When the shut-off time comes
The system turns off automatically.
To check or change the time remaining until
the shut-off time ———————————————
Press SLEEP once.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press SLEEP repeatedly.
To cancel the Sleep Timer ———————————
Press SLEEP repeatedly until “SLEEP OFF” appears on the display
window.
20 • Turning off the power also cancels the Sleep Timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
DAP modes —————————————————
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects. The DAP
mode can create these important elements, and gives you a real
“being there” feeling.
Press DSP MODE.
The currently selected DSP mode appears on the display when the
button is pressed, and changes as follows each time the button is
pressed subsequently.
=SURROUND ON= THEATER= LIVE CLUB= DANCE CLUB
=HALL=PAVILION = DSP OFF = (back to the beginning)
• SURROUND ON is selected when playing a video with audio
recorded in Dolby Pro Logic, Dolby Digital, DTS digital, or
MPEG Multichannel surround audio.
Note:
• It is possible to select only “SURROUND ON” and “SURROUND
OFF” when playing a Dolby Digital audio, DTS digital audio, or
MPEG Multichannel audio DVD.
On the front panel:
THEATER:
LIVE CLUB:
Gives the feeling of a large theater.
Gives the feeling of a live music club
with a low ceiling.
SURROUND
DSP MODE
DANCE CLUB:
HALL:
Gives a throbbing bass beat.
Gives clear vocal and the feeling of a concert
hall.
Give the spacious feeling of a pavilion with a
high ceiling.
When playing a video with audio recorded in Dolby surround, Dolby
digital, or DTS digital surround audio:
Press SURROUND.
The current status appears on the display when the button is pressed,
and changes between SURROUND ON and SURROUND OFF each
time the button is pressed subsequently.
PAVILION:
Notes:
• The DSP modes have no effect on monaural sources.
• The indicator lights up when the signals encoded with
Dolby Digital come into the system.
• The indicator lights up when the signals encoded
with Dolby Pro Logic decoder built in this system is activated.
• The indicator lights up when the signals encoded with DTS
Digital Surround come into the system.
• The indicator lights up when the signals encoded with
When selecting DAP:
Press DSP MODE.
The currently selected DAP mode appears on the display when the
button is pressed, and changes as follows each time the button is
pressed subsequently.
=THEATER=LIVE CLUB=DANCE CLUB=HALL=PAVILION=
DSP OFF=(back to the beginning)
MPEG Multichannnel Surround come into the system.
• The effects may be adjusted with “SOUND MENU settings”
when the DAP mode is selected (see page 41).
Notes:
• “PRO LOGIC”, rather than “SURROUND ON”, is displayed
when a source other than DVD is selected.
IMPORTANT
• The down-mixed (Lo/Ro*) analog signal is output from the VCR
OUT (REC) terminal and TAPE/MD OUT (REC) terminal at the
rear of the center unit when “SURROUND OFF” is selected with
Dolby digital, DTS digital, or MPEG Multichannel surround
audio.
Before recording a digital source, turn off the DSP mode.
To select the DSP mode ————————————
From the remote controls:
• When the DSP mode is ON, the VCR OUT (REC) jack and the
TAPE/MD OUT (REC) jack will output surround sound to the
front speakers only.
Primary remote control
Secondary remote control
When recording, turn the DSP mode OFF.
* Lo/Ro refers to the downmix output when connected to a device
that does not use a Dolby Pro Logic decoder.
DSP MODE
DSP MODE
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
and
represent disc types.
Notes:
• The unit can playback DVD VIDEO, Audio CD, Video CD, and
SVCD discs only. Do not load other disc types.
For details about playable disc types, see page 5.
• When loading a disc in the tray, be sure to position the disc inside
the recess. Otherwise, the disc may be damaged when the tray is
closed, and the disc may not be removed form the unit.
• Playback begins automatically with some discs.
• DVD or Video CDs/SVCDs recorded with PBC (playback control),
pressing PLAY may display the menu on the TV screen. You may
select items from the menu screen thus displayed and call up the
locations to be viewed (see pages 24 and 25 for details).
• You can also open and close the disc tray from the opening on-
screen display.
To play a disc
On the front panel
3
2
Use the 5/∞ cursors to move pointer to ), then press ENTER to
open or close the disc tray.
• Discs may be played back from the on-screen menu.
Use the 5/∞ cursors, move the pointer to #, and press ENTER to
begin playback.
1.
2.
Switch the TV and display video on from this
system.
Set the TV input to video 1 (or video 2 or video 3).
To stop playback competely
From the remote controls: Press STOP.
On the front panel: Press 7.
Insert the disc.
1 Press 0*on the center unit to open the disc tray.
Change the playback source to DVD.
2 Place the disc in the tray.
Display when a disc is inserted —————————
With the playback side (non-label side) down.
When a DVD is inserted
To insert an 8 cm disc, place it in the inner recess.
Display window:
Opening on-screen:
“READING”=“DVD”
3 Press 0 to close the disc tray.
When a Video CD or SVCD has been inserted
Display window:
Playback begins immediately a DVD auto-playback disc is
inserted.
Opening on-screen:
“READING”=“VCD 12 48:12”
3.
Play the disc.
(total number of tracks and total time display)
«
+After 4 seconds
From the remote controls:
Press DVD.
“VCD 1 4:12”
Change the playback source to DVD. The remote control
enters the DVD mode and playback begins.
(first track time)
Primary remote control
Secondary remote control
When an Audio CD has been inserted
Display window:
Opening on-screen:
“READING”=“CD 12 48:12”
(total number of tracks and total time display)
«
+After 4 seconds
“CD 1 4:12”
DVD
DVD
On the front panel:
(first track time)
Press 3**.
Change the playback source to DVD. Playback begins.
*
When 0 on the center unit is pressed while on standby, power
is automatically turned on and the disc tray ejected.
** When 3 on the center unit is pressed while on standby, power
is automatically turned on, and playback begins, if a disc is in
the tray.
DVD is selected as the playback source if there is no disc in the
tray.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
On-screen guide icons ————————————
During DVD playback, you may see icons displayed over the
picture. These have the following meanings.
Fast forward and rewind
7 During playback
Displayed at the beginning of a scene recorded from
multiple angles (see page 31).
From the remote controls:
Primary remote control
Secondary remote control
Displayed at the beginning of a scene recorded with
multiple audio languages (see page 30).
Displayed at the beginning of a scene recorded with
multiple subtitle languages (see page 29).
A setting is possible to suppress display of these icons. The setting is
entered in the on-screen menu under “DVD MENU Settings” (see
page 46 for details).
4/REW, FF/¢
4/REW, FF/¢
Continue pressing FF/¢ or 4/REW.
About invalid operation icon
When you press a button, if the unit does not accept its operation,
On the front panel:
4, ¢
appears on your television screen.
Operations are occasionally unacceptable even if
displayed.
is not
Note that some operations may not be accepted. For example, some
discs may not allow fast forward, fast backward or slow motion
playback.
Pausing
Continue pressing ¢ or 4.
From the primary remote control:
Continue pressing ¢ for fast forward.
Continue pressing 4 for rewind.
Normal playback resumes when the button is released.
• Continue pressing the button to increase the fast forward or
rewind speed (5× = 20×).
Locating the beginning
PAUSE
Locates the beginning of the title and
chapter with DVDs.
Locates the beginning of the track with audio CDs, Video CDs and
SVCDs.
Press PAUSE.
On the front panel:
7 For DVD: During playback
For Audio CD: Any time
For Video CD/SVCD: During playback
From the remote controls:
Primary remote control
Secondary remote control
PAUSE
Press 8 .
Playback is paused.
Press PAUSE while paused to move to the next still picture.
To resume playback.
From remote control: Press PLAY.
On the front panel: Press 3.
4/REW, FF/¢
Press FF/¢ or 4/REW.
4/REW, FF/¢
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
On the front panel:
Selecting playback from the DVD menu
4, ¢
DVD discs generally have their own menus which show
the disc contents. These menus contain various items
such as titles of a movie, names or songs, or artist
information, and display them on the TV screen.
You can locate a desired scene by using the menu.
7 Insert the DVD disc.
From the remote controls:
Press ¢ or 4.
Primary remote control
Secondary remote control
Press 4 to locate the beginning of the current chapter, title, or
track, and press ¢ to locate the beginning of the next chapter, title,
or track.
Note:
• When you play a Video CD or SVCD disc with PBC function or a
DVD disc, the unit may locate different place, but it will generally
locate the beginning of the title or chapter or track.
Resuming playback
The unit stores the position on a disc
where you want to interrupt playback
at, and resumes playback from that position later.
2
1
1
2
1.
2.
Press MENU or TITLE.
The menu appears on the TV
screen.
• TITLE not on secondary
remote control.
To store the playback position —————————
Example:
From primary remote control only:
RESUME
Use the 2/3/5/∞ cursors to select a desired item,
then press ENTER.
The unit starts playback of the selected item.
• With some discs, you can also select items by entering the
corresponding number using the number buttons, which may
cause the unit to automatically start playback.
Press RESUME during playback.
The unit stores the position at which RESUME is pressed, and the
RESUME indicator in the display window is lit. The last stored
memory overrides the previous memory.
Note:
About menu
• The interrupted position is stored even when
remote control, or on the center unit, are pressed to switch
power OFF (standby), instead of pressing RESUME.
AUDIO on the
Normally, a DVD disc which contains more than one title may have
a “title” menu which lists the titles. In this case, the menu appears
on the TV screen by pressing TITLE . Some DVD discs may also
have a different menu which appears by pressing MENU.
See the instructions of each DVD disc for its particular menu.
To resume playback from the stored position ———
Notes:
Press RESUME while paused.
Playback begins from the stored position.
• The unit will also resume playback when RESUME is pressed in
the standby mode.
• When
The disc does not have a menu listing the titles.
• When appears on the TV screen by pressing MENU in step 1:
The disc does not have a menu.
appears on the TV screen by pressing TITLE in step 1:
Note:
• When you press RESUME during playback of a Video CD or
SVCD disc with the PBC function, the unit may resume playback
from a point slightly earlier than the resume point you stored.
To clear the stored position
Open the disc tray.
The RESUME indicator in the display window goes off.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
Selecting the location to view from the
video CD menu
To specify the title or track number for
playback
When playing back Video CDs or SVCDs recorded
with PBC (playback control), a list of the recorded
contents may appear on the TV screen as a menu. The location to
view may be conveniently called up from this menu screen.
Use the number buttons to specify the
title (DVDs) or track number (CDs)
to begin playback from the desired location.
7 For DVD: While stopped
For Audio CD: During playback or while stopped
For Video CD/SVCD: During playback without PBC function or
while stopped
7 When the menu appears on the TV screen during playback with
PBC.
From primary remote control only:
RETURN
From primary remote control only:
1
1
1.
Use the number buttons (1~10, +10) to select the
desired number of the item.
1.
Use the number buttons (1~10, +10) to select the
desired title or track number.
Selecting numbers
Example:
To select 3 on menu:
Press 3.
Selecting 1~10:
To select 11 on menu :
Press +10 = 1.
Press the relevant button between 1 and 10.
Selecting 11 or higher:
To select 13: Press +10 = 3.
To select 24: Press +10 = +10 = 4.
To select 40: Press +10 = + 10 = +10 = 10.
Playback starts from the selected
item.
Press RETURN to return to the menu screen.
The specified title or track number appears in the display
window, and playback begins from that location.
• You can also see the selected title or track number on the on-
screen display.
When “NEXT” or “PREVIOUS” appears on the TV screen,
the unit generally works as follows:
• Pressing ¢ turns to the next page.
• Pressing 4 returns to the previous page.
The method of the operation is different depending on the disc.
Notes:
• When
appears on the TV screen.
To activate the PBC function when a PBC-compatible Video
CD or SVCD disc is being played back without the PBC
function, press STOP then press PLAY.
You can also activate the PBC function using the on-screen
display as follows.
The title or track you have selected is not contained in the disc.
• This function does not work during Video CD or SVCD playback
with PBC function.
1. Press DVD ON SCREEN.
2. Use the 5/∞ cursors to move the pointer to [PBC CALL],
then press ENTER.
If you want to playback a PBC-compatible Video CD or SVCD
disc without activating the PBC function, start playback by
using the number buttons instead of the PLAY button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
To play from the beginning of a title,
chapter, or track
2.
Use the 5/∞ cursors to move the pointer to
[CHAP. SEARCH], then press ENTER.
The color of [CHAP. SEARCH]
changes and “GO TO CHAPTER:”
appears in the message area.
The beginning of previous or later
chapters or tracks may be skipped.
7 For DVD: During playback
For Audio CD: Any time
For Video CD/SVCD: During playback without PBC function
Message area
From the remote controls:
Primary remote control
Secondary remote control
3.
4.
Use the number buttons (0~9) to enter the desired
chapter number.
The selected chapter number appears in the message area.
Example:
To select chapter number 8: Press 8.
To select chapter number 37: Press 3 = 7.
Press ENTER.
The unit starts playback from the selected chapter.
1
1
To return the regular display:
Press DVD ON SCREEN.
1.
Press ¢ or 4.
• Press ¢ the required number of times to move to a later
chapter or track.
Notes:
• Press 4 the required number of times to return to the
previous chapter or track.
• Press 4 once to return to the beginning of the chapter or
track currently playing.
• When the chapter number is incorrect in step 3:
Overwrite the incorrect number with the correct number.
• When
is displayed in the TV screen in step 4:
The chapter you have selected is not contained in the disc, or
chapter search does not work on the disc.
• With some discs, the unit automatically starts searching for the
chapter after entering the chapter number in step 3.
Notes:
• This function may not work with some DVD discs.
• This function does not work during Video CD or SVCD playback
with PBC function.
• Press ¢ or 4 on the center unit for the same operation.
To specify the time for playback
[TIME SEARCH]
To specify the chapter number for
playback [CHAP. SEARCH]
You can play a disc from the desired
position by specifying the elapsed
time from the beginning of the disc
use the TIME SEARCH function.
If the current title of a DVD disc being played is divided
into chapters, you can skip to a desired chapter by
Note that some DVD discs do not contain time information, and the
TIME SEARCH function cannot be used.
specifying the chapter number using the on-screen display.
7 During playback
7 For DVD: During playback
For Audio CD: While stopped
From primary remote control only:
For Video CD/SVCD: While stopped without PBC function
From primary remote control only:
3
1
3
2 • 4
1
2 • 4
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
To select the screen for playback from
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
the digest screen [DIGEST]
The unit can display the opening scene of
each title or chapter on a DVD or each track
of a Video CD or SVCD. You can select a desired title, chapter or
track from the opening scenes displayed on the TV screen.
Use the 5/∞ cursors to move the pointer to
[TIME SEARCH], then press ENTER.
The color of [TIME SEARCH] changes and “GO TO:”
appears in the message area.
7 For DVD: While stopped or during playback
For Video CD/SVCD: While stopped or during playback
without PBC function.
(for DVD)
(for Audio CD/Video CD/SVCD)
From primary remote control only:
Message area
Message area
1
3.
Use the number buttons (0 ~ 9) to enter the time.
The specified time appears in the message area.
Example (for DVD):
To playback from 2(H):34(M):00(S)
2 • 3
You do not have to press
“0” to enter the railing
zeros (for the last two digits
in the example above).
Of course, it is possible to
enter them.
• You can specify the time
in hour/minute/second
format for DVD discs,
and in minute/second
format for Audio and
Video CD/SVCD discs.
Press “2”
Press “3”
4/REW
FF/¢
Press “4”
1.
2.
Press DIGEST.
• DVD is stopped
Up to nine first scenes of
each title may be displayed.
• DVD is playing
Up to nine first scenes of
each chapter in the current
title may be displayed.
• Video CD/SVCD
Press ENTER
When you make a mistake
Use the 2 cursor to move the cursor to an incorrect number
and enter the correct number.
4.
Press ENTER.
The unit starts playback from the selected time.
Up to nine first scenes of
each track may be displayed.
To return to the regular display:
Press DVD ON SCREEN.
Use the 2/3/5/∞/ cursors to select the desired
title, chapter or track.
Note:
When the disc contains more than 9 titles or tracks, the digest
screen will have more than one page.
• When
appears on the TV screen in step 2:
The time you have selected is not contained on the disc, or the
In this case, display a different page of the digest with the
method described below.
TIME SEARCH function does not work on the disc.
Also note that the TIME SEARCH function does not work during
Video CD or SVCD playback with the PBC function.
To display the next page: Press ¢.
To display the previous page: Press 4.
Or
When the selected title or track is in the upper left-
hand corner of the screen, pressing the 2 cursor.
When the selected title or
track is in the lower right-
hand corner for the screen,
pressing the 3 cursor.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
3.
Press ENTER.
2.
Hold down FF/¢ or 4/REW for more than
The unit starts playback from the selected title, chapter or track.
2 seconds.
Hold down FF/¢ will playback your selection in slow
To return to the regular display:
Press DIGEST.
motion, starting from the pause frame.
Hold down 4/REW will playback your selection in reverse
slow motion (DVD only).
Each time you hold down either button during slow-motion,
the playback speed will increase as follows:
Note:
• With some discs, depending on the contents, it may take some
time until all the scenes appear on the screen.
Forward: 1/32 = 1/16 = 1/8 = 1/4 = 1/3 = 1/2
Reverse: 1/16 = 1/12 = 1/8 = 1/4 = 1/3
To advance the picture one frame at a time
Pausing slow-motion playback
Press the PAUSE button to pause slow-motion playback.
Advancing a paused still picture one frame
at a time.
Restoring regular playback
Press the PLAY button to resume normal playback.
7 During playback
From primary remote control only:
Notes:
• Audio is automatically muted during slow-motion playback.
• Video CDs or SVCDs cannot be played in reverse slow-motion.
• You can perform the above operations using 8, ¢, and 4
buttons on the center unit.
1 • 2
To display Continuous Photos [STROBE]
Nine still pictures may be displayed one after
the other.
1.
2.
Press PAUSE at the location at which the picture is
to be advanced.
7 During playback
The picture is paused.
From primary remote control only:
Press PAUSE.
Each time you press PAUSE, the still picture advances to the
next frame.
Press PLAY to return to normal playback.
Note:
1
• You can perform the above operation using 8 button on the center
unit.
1.
Press PAUSE continuously to display continuous
photos.
When the screen appears
displaying the nine pictures,
release the PAUSE button.
The screen plays back the nine
pictures in strobe-like action.
Slow-Motion Playback [SLOW]
7 During playback
From primary remote control only:
2
1
• Press PAUSE during strobe playback to pause.
Press PAUSE to display the next nine still pictures.
Press PLAY to resume strobe playback.
To clear the strobe screen, press PAUSE continuously until the
normal screen appears.
Note:
1.
Press PAUSE at the section you wish to view in
slow motion.
• Audio is not played during strobe playback.
The image will pause.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
Zooming a scene [ZOOM]
Changing the Subtitle Language
[SUB TITILE]
7 During playback or while paused.
Some DVD and SVCD discs contain subtitles. With
such discs, you can choose which kind of subtitles to
display (or turn off subtitles entirely). At the beginning
From primary remote control only:
of subtitled parts,
appears on the TV screen.
1
2
Using the SUBTITLE button ———————————
7 During playback
From primary remote control only:
1
1.
2.
Press ZOOM.
“ZOOM” appears on the TV screen.
2
The unit zooms in to the center part of the scene to produce a
double-sided image.
ZOOM
1.
2.
Press SUBTITLE.
Use the 2/3 cursors to select the desired subtitle.
Turning subtitles ON/OFF
For DVD:
Press SUBTITLE.
Use the 5/∞/2/3 cursors to move the zoomed-in
scene.
Pressing the button toggles subtitle display ON and OFF.
For SVCD:
Pressing SUBTITLE until “OFF” appears on the TV screen.
Note:
• When
appears on the TV screen:
You cannot select the subtitle.
To change subtitle display using the on-screen display —
7 During playback
To pause zoom play
Press PAUSE.
To resume zoom play, press PLAY.
To return to normal playback
Press ZOOM.
From remote controls:
Primary remote control
Secondary remote control
Note:
• During Zoom play, the picture may be garbled or noisy.
1
2 • 3
2 • 3
1
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
2.
3.
Use the 5/∞ cursors to move the pointer
3.
Use the 2/3 cursors to select the desired audio
language or sound.
[SUBUTITLE].
Each time you press the 2/3 cursors, the audio language or
sound changes.
Use the 2/3 cursors to select the desired subtitle.
Total number
Each time you press the 2/3 cursors, the subtitle changes.
Example:
Example:
(for DVD)
Total number
Selected audio number
Selected audio language
Selected subtitle
number
To turn off the on-screen display
Press DVD ON SCREEN.
Selected subtitle
Note:
• The selected language may abbreviated on the TV screen. See
“Appendix A: Table of languages and their abbreviations” in this
Note:
• When
You cannot select the audio.
appears on the TV screen:
manual.
Total number
Example:
Changing the audio channel [AUDIO]
(for SVCD)
For in some karaoke Video CDs or SVCDs, one of
the audio channels includes a vocal while the other
does not. With such discs, you can choose to enjoy
karaoke without the vocal or with the vocal by selecting
the audio channel to be played back.
Selected subtitle
number
Notes:
7 During playback
• An SVCD disc can have up to four subtitles.
• If no subtitle is recorded on the channel selected, no subtitle
appears on the TV screen.
From the remote controls:
Primary remote control
Secondary remote control
To turn off the on-screen display
Press DVD ON SCREEN.
Changing the audio language or sound
[AUDIO]
Some DVD discs contain multiple audio tracks. With
such discs, you can choose which audio track to listen to
during playback.
2 • 3
1
2 • 3
1
At the beginning of “multi-audio language” parts,
the TV screen.
appears on
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
7 During playback
From the remote controls:
2.
3.
Use the 5/∞ cursors to move the pointer to [AUDIO].
Primary remote control
Secondary remote control
Select the audio channel(s) to be played back
using the 2/3 cursors.
(for Video CD)
(for SVCD)
1 2 • 3
2 • 3
1
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
Use the 5/∞ cursors to move the pointer to [AUDIO].
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
Notes:
1.
Press and hold ANGLE for more than 1 seconds.
Up to nine camera angle
recorded on a disc appear on
• An SVCD disc has a pair of stereo channels; Sound 1 and Sound 2.
In the above options, “1” indicates “Sound 1”, while “2” indicates
“Sound 2”.
• Some SVCD discs may not contain audio on Sound 2. When playing
back such a disc, no audio is reproduced by selecting “2 L/R”, “2 L”
or “2 R” above.
the TV screen.
To turn off the on-screen display
Press DVD ON SCREEN.
The selected camera angle
2.
3.
Use the 5/∞/2/3 cursors to select the desired
Viewing from Multiple Angles [ANGLE]
angle.
You can enjoy a variety of scene angles if the DVD disc
contains “multi-angle” parts, where multiple cameras
were used to shoot the same scene from different angles.
You can select one of these viewing angles from the
normal screen or on-screen display.
Press ENTER.
The selected angle appears on the TV screen.
Selecting a scene angle from the on-screen display —
7 During playback
At the beginning of “multi-angle” parts,
screen.
appears on the TV
Using the ANGLE button ————————————
From the remote controls:
Primary remote control
Secondary remote control
7 During playback
From primary remote control only:
1
2 • 3
2 • 3
1
1
2
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
2.
3.
Use the 5/∞ cursors to mode the pointer to [ANGLE].
Use the 2/3 cursors to select the desired angle
1.
2.
Press ANGLE.
Press ANGLE or the 2/3 cursors to select the
number.
desired angle.
The total munber of recorded angles
Each time you press ANGLE or the 2/3 cursors, the angle
Example:
changes.
Selecting an angle from the angle list display ———
7 During playback
From primary remote control only:
The current angle number
To turn off the on-screen display
Press DVD ON SCREEN.
1
Note:
• When
appears on the TV screen
The current scene is not recorded from multiple angles.
2 • 3
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
Selecting the Picture Character
[THEATER POSITION]
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
You can select the quality of the image from
among four options (OFF, 1, 2, and 3)
according to the type of programming, picture
tone or personal preferences.
Use the 5/∞ cursors to move the pointer to
[REPEAT], then press ENTER.
Each time you press ENTER, the repeat mode changes as
follows:
7 During playback
For DVD
(for DVD)
=T. REPEAT (title repeat)
=C. REPEAT (chapter repeat)
=No indication (off)
=(back to the beginning)
From the remote controls:
Primary remote control
Secondary remote control
The current title or chapter
will be repeated.
Selected repeat mode
For Audio CD and Video CD/SVCD
=REPEAT ALL=REPEAT 1=No indication (off)=(back to the
beginning)
(for Video CD)
(for Audio CD)
1
1
1.
Press THEATER POSITION to select the desired
picture character.
Each time you press the button, the picture character changes
as follows:
Selected repeat mode
Selected repeat mode
(for SVCD)
1
Selected effect mode
“OFF” is the normal position.
Selecting a higher number results in a darker picture character.
Press ENTER to close the THEATER POSITION screen.
• The THEATER POSITION screen will automatically close if left
idle for more than 10 seconds.
Selected repeat mode
REPEAT ALL : All the tracks are played repeatedly.
REPEAT 1 : The current track is played repeatedly.
Repeating a current title, chapter or track,
or all tracks [REPEAT]
The current track or all tracks is/are played repeatedly.
To stop repeat playback
Press STOP.
7 For DVD: During playback
For Audio CD: Any time
• When a DVD disc is set, the unit stops playback and quits repeat
mode.
For Video CD/SVCD: During playback without PBC function.
• When an Audio CD, Video CD or SVCD is set, the unit stops
playback but remains in repeat mode.
From the remote controls:
Primary remote control
Secondary remote control
1 2
2
1
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
To quit repeat playback
To quit A-B repeat playback
Move the pointer to [REPEAT] and press ENTER repeatedly until
Press STOP. The unit stops playback and quits A-B repeat mode.
the [REPEAT] display turns off.
Quitting A-B repeat mode without stopping playback
Tu turn off the on-screen display
Move the pointer to [A-B REPEAT] and press ENTER.
Press DVD ON SCREEN.
To turn off the onscreen display
Notes:
Press DVD ON SCREEN.
• Repeat play function cannot be used during Video CD playback
with PBC function.
Note:
• If
playback
appears when pressing ENTER in step 2 during DVD
• If
playback.
appears when pressing ENTER in step 2 during DVD
You cannot repeat the title or chapter because of the disc contents.
You cannot repeat the selected portion because of the disc
contents.
Repeating a desired part [A-B REPEAT]
Sampling all tracks [INTRO]
7 During playback
You can sample the tracks of an Audio CD,
Video CD or SVCD by playing back only
beginning 10 seconds of each track in order.
From the remote controls:
Primary remote control
Secondary remote control
7 While stopped
From the remote controls:
Primary remote control
Secondary remote control
1 2 • 3
2 • 3
1
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
1 2
2
1
Use the 5/∞ cursors to move the pointer to
[A-B REPEAT], then press ENTER at the beginning
of the part you want to repeat (point A).
The color of [A-B REPEAT] changes.
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
Use the 5/∞ cursors to move the pointer to
[INTRO], then press ENTER.
3.
Press ENTER at the end of the part you want to
repeat (point B).
The unit locates “A” and starts repeat playback between “A”
and “B”.
(for Audio CD)
(for Video CD/SVCD)
(for DVD)
(for Audio CD)
The first 10 seconds of each track on a disc are played back in
numerical order form the first track.
When all tracks have been played once, INTRO scan mode
quits.
Point A Point B
(for Video CD)
Point A Point B
(for SVCD)
To quit INTRO scan
Press STOP. The unit stops and quits INTRO scan mode.
Quitting intro scan mode without stopping playback
Move the pointer to [INTRO] and press ENTER.
To turn off the on-screen display
Press DVD ON SCREEN.
Point A Point B
Point A Point B
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
Checking the Disc Time [TIME SELECT]
Programming the Playing Order of the
Tracks [PROGRAM]
You can choose the displayed time mode for
an Audio CD, Video CD or SVCD disc in the
display on the front panel and in the on-screen display.
You can play tracks on an Audio CD, Video
CD or SVCD in the desired order.
7 For Audio CD: Any time
For Video CD/SVCD: While stopped
7 While stopped
From primary remote control only:
From the remote controls:
Primary remote control
Secondary remote control
3
1
2
4
1 2 • 3
2 • 3 1
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
Use the 5/∞ cursors to move the pointer to
[TIME SELECT].
(for Audio CD)
(for Video CD/SVCD)
1.
2.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
Use the 5/∞ cursors to move the pointer
[PROGRAM] and press ENTER.
The color of [PROGRAM] changes.
Time display
Time display
(for Audio CD)
(for Video CD/SVCD)
3.
Press ENTER.
Each time you press ENTER, the time mode changes as
follows:
• During playback (for Audio CD)
3EACH (Elapsed time of the current track)
∞
EACH REMAIN (Remaining time of the current track)
3.
Select the tracks in the desired order using the
number buttons (1~10, +10).
Up to 16 tracks can be programmed. You may select the same
track more than once.
∞
TOTAL (Total elapsed time of the disc)
∞
TOTAL REMAIN (Total remaining time of the disc)
Selecting numbers
Selecting 1~10:
Press the relevant button between
1 and 10.
Selecting 11 or higher:
• While stopped
3EACH REMAIN (Remaining time of the current track)
∞
TOTAL (0:00)
∞
Selected track number
To select 13: Press +10 = 3.
TOTAL REMAIN (Total remaining time of the disc)
To select 24: Press +10 = +10 = 4.
∞
To select 40: Press +10 = + 10 = +10 = 10.
EACH (0:00)
Note:
If you mistakenly select the wrong track number press STOP
to delete the entered program.
Then reselect the tracks you wish.
• When you select “EACH REMAIN” while stopped, you can
change the track by pressing ¢ or 4.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD player
4.
Press PLAY to start program play.
When all of the programmed tracks have finished playback, the
unit stops but the program remains.
To turn off the on-screen display
Press DVD ON SCREEN.
Quitting programmed playback
Move the pointer to [PROGRAM] and press ENTER.
[PROGRAM] will turn to its original color, and the program
contents will be deleted.
Note:
• When playing an Audio CD, Video CD or SVCD if less than 16
tracks have been programmed, it is possible to add tracks during
playback.
Random Play [RANDOM]
You can play tracks in random order.
7 While stopped
From the remote controls:
Primary remote control
Secondary remote control
1 2 • 3
Press DVD ON SCREEN.
2 • 3 1
1.
2.
The on-screen display appears on the TV screen.
Use the 5/∞cursors to move the pointer [RANDOM].
(for Audio CD)
(for Video CD/SVCD)
3.
Press ENTER.
The color of [RANDOM] changes. Random play begins.
• When all tracks have been played once, random play ends.
• The same track will not be played back more than once
during random play.
To turn off the on-screen display
Press DVD ON SCREEN.
To quit random playback
Press STOP.
Note:
• During random playback of an Audio CD, moving the pointer to
[RANDOM] and pressing ENTER will quit random playback and
begin regular playback with the current track.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving radio broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Setting the AM tuner interval spacing
Using preset tuning
Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. When shipped, the spacing is set to 9 kHz.
Once a station is asssigne to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
On the front panel only:
To select the 10 kHz interval
Be sure the center unit is turned off, but is plugged into an AC
To store the preset stations ——————————
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
outlet. Hold down 8 and press
. “10K STEP” appears on the
canceled before you finish, start from step 1 again.
display window. Now the 10 kHz interval is selected.
From primary remote contol only:
To select the 9 kHz interval
Be sure the center unit is turned off, but is plugged into an AC
1
outlet. Hold down 7 and press
. “9K STEP” appears on the
display window. Now the 9 kHz interval is selected.
Tuning in stations manually
From the remote controls:
3
Primary remote control
Secondary remote control
1
2 • 4
1.
Tune in the station you want to preset (see “Tuning
in stations manually”).
• If you want to store the FM reception made for this stations,
select the FM reception mode you want. See “Selecting the
FM reception mode” on page 37.
2.
3.
Press MEMORY (¶ REC).
“CH-” appears and the channel number position starts flashing
on the display window for about 10 seconds.
2
1
1
Use the number buttons (1~10, +10) to select a
channel number while the channel number
2
position is flashing.
1.
2.
Press FM/AM to select the band.
• For channel number 5, press 5.
• Each time you press the button, the band alternates between
FM and AM.
• For channel number 15, press +10 = 5.
• For channel number 20, press +10 = 10.
• For channel number 30, press +10 = +10 = 10.
Press TUNING UP (FF/¢) or TUNING DOWM
(4/REW) repeatedly until you find the frequency
4.
5.
Press MEMORY (¶ REC) again while the selected
channel number is flashing on the display window.
The selected channel number stops flashing.
you want.
• When you hold the button, the frequency keeps changing
unitl a station is tuned in.
The sation is assigned to the selected channel number.
Note:
• When a station of sufficient signal strength is tuned in, the
TUNED indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator
also lights up.
Repeat steps 1 to 4 until you store all the stations
you want.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving radio broadcasts
To erases a stored preset station
Storing a new station on a used number erases the previously stored
Selecting the FM reception mode
one.
When an FM stereo broadcast is hard to receive or
noisy
To tune in a preset station ———————————
You can change the FM reception mode while receiving an FM
broadcast.
• You can store the FM reception mode for each preset station.
From primary remote control:
From primary remote control:
1
2
1
1.
2.
Press FM/AM.
1.
Press FM MODE.
• Each time you press the button, the band alternates between
FM and AM.
• Each time you press the button, the FM reception mode
alternates between “AUTO” and “MONO.”
Press the number buttons (1~10, +10) to select a
preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 = 5.
• For channel number 20, press +10 = 10.
• For channel number 30, press +10 = +10 = 10.
AUTO: When a program is broadcasted in stereo, you will
hear stereo sound; when in monaural, you will hear
monaural sounds. This mode is also useful to
suppress static noise between stations. The AUTO
MUTING indicator lights up on the display.
MONO: Reception will be improved although you will lose
the stereo effect. In this mode, you will hear noise
while tuning into the stations. The AUTO MUTING
indicator goes off on the display.
From secondary remote control:
Beat cut
1
When listening to an AM broadcast with a lot of noise
interference, you can change the BEAT CUT mode by pressing
FM MODE.
Each time you press FM MODE, operation toggles between
“BEAT CUT 1” and “BEAT CUT 2”.
Choose the setting that gives the clearest sound.
2
1.
2.
Press FM/AM.
• Each time you press the button, the band alternates between
FM and AM.
Press PRESET UP (+) or PRESET DOWN (–) to
select the desired preset number.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing miscellaneous settings
It is possible to perform a variety of settings from the on-screen display.
The two on-screen displays used for settings are the AV amplifier settings on-screen display and the DVD settings on-screen display.
Only the primary remote control can be used on the MAIN MENU, SOUND MENU, and SPEAKER MENU found on AV amplifier
settings screen.
Either the primary or secondary remote can be used on the DVD MENU found on the DVD settings screen.
AV amplifier settings on-screen display
DVD settings on-screen display
The following menus are available from the on-screen AV Amp
settings.
The following menu is available from the on-screen DVD settings.
MAIN MENU ————————————————
DVD MENU —————————————————
SOUND MENU————————————————
SPEAKER MENU ———————————————
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN MENU Settings
Use the primary remote control to perform MAIN MENU settings.
ON SCREEN LANGUAGE
Buttons used ————————————————
MAIN ON SCREEN and the 5/∞/2/3 cursors.
The on-screen language is the language used in the display for the
MAIN MENU, SOUND MENU, SPEAKER MENU, and DVD
MENU.
The on-screen language is set to ENGLISH. The ON SCREEN
LANGUAGE option is not available on this system.
ON SCREEN LANGUAGE
MAIN ON SCREEN
5/∞/2/3 cursors
Setting the SLEEP TIMER
(See page 20)
1.
2.
Open the MAIN MENU.
See “Opening the MAIN MENU”
Move the pointer to SLEEP TIMER using the 5/∞
cursors.
Opening the MAIN MENU
3.
Use the 2/3 cursors to set the sleep time.
Select the sleep time in minutes from the following:
1.
2.
Stop DVD image playback on the TV screen.
Select a playback source other than the tuner. If the playback
source is set to DVD, press STOP to quit playback.
O5FF j 10 j 20 j 30 j 60 j 90 j 120 j 1550
Press MAIN ON SCREEN.
The MAIN MENU is displayed.
• If the SLEEP TIMER has already been set, you can confirm
or change the remaining time here.
Referred to as a “tag”
Items
This arrow is referred to as a “pointer”.
3.
When you are finished with on-screen settings,
press MAIN ON SCREEN again to close the MAIN
MENU.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN MENU Settings
Changing the DECODE MODE
3.
Use the 2/3 cursors to set the DSP MODE.
(See page 18)
When the source is DVD:
You may choose between
“SURROUND” j “OFF”
This option is used to change the digital audio decode mode.
The default setting of [AUTO/PCM] is recommended for regular
use.
When the playback source is DVD, you may select a DECODE
MODE.
When the source is not DVD or TUNER*:
You may choose between
j SURROUND j THEATER j LIVE CLUB j DANCE CLUB
j HALL j PAVILION j OFF j (back to the beginning)
1.
2.
Open the MAIN MENU
See page 39, “Opening the MAIN MENU”.
* When the source is set to tuner, the MAIN MENU will not
be displayed.
Move the pointer to DECODE MODE using the 5/∞
cursors.
Adjusting the volume
(See page 16)
1.
2.
Open the MAIN MENU.
See page 39, “Opening the MAIN MENU”.
Move the pointer to VOLUME using the 5/∞
cursors.
3.
Use the 2/3 cursors to set the DECODE MODE.
The following decoding options are available: AUTO/PCM,
DOLBY DIGITAL, DTS, or MPEG.
• See page 18 for details of each in decode mode.
Note:
• Only audio for discs for the selected decode mode may be played
when a decode mode other than “AUTO/PCM” is selected.
When the decode mode is changed and a disk has been played
back, return the decode mode to “AUTO/PCM”.
3.
Use the 2/3 cursors to adjust the volume level.
Press 3 to increase the volume.
Press 2 to decrease the volume.
Changing the DSP MODE
(See page 20)
1.
2.
Open the MAIN MENU.
See page 39, “Opening the MAIN MENU”.
Move the pointer to DSP MODE using the 5/∞
cursors.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND MENU Settings
Use the primary remote control to perform SOUND MENU settings.
Adjusting the balance
Buttons used ————————————————
MAIN ON SCREEN and the 2/3/5/∞ cursors.
Adjusting the front speaker balance.
1.
2.
Open the SOUND MENU.
See “Opening the SOUND MENU”.
Move the pointer to BALANCE using the 5/∞
cursors.
MAIN ON SCREEN
2/3/5/∞ cursors
3.
Use the 2/3 cursors to adjust the balance.
Press 2 to shift the balance to the left.
Press 3 to shift the balance to the right.
Using LOUDNESS
When listening to audio at low volume, sounds in the highest and
lowest frequencies become difficult to hear.
Turning loudness ON augments low and high frequency ranges for a
fuller sound at low volume.
1.
2.
Open the SOUND MENU.
See “Opening the SOUND MENU”.
Move the pointer to LOUDNESS using the 5/∞
cursors.
Opening the SOUND MENU
1.
Stop DVD image playback on the TV screen.
Select a playback source other than the tuner. If the playback
source is set to DVD, press STOP to quit playback.
2.
3.
Press MAIN ON SCREEN.
The MAIN MENU will be displayed.
3.
Use the 2/3 cursors to select ON or OFF.
Move the pointer to the SOUND MENU tag using
the 2/3 cursors.
Pressing 2/3 toggles loudness ON/OFF.
4.
When you are finished with on-screen settings,
press MAIN ON SCREEN again to close the SOUND
MENU.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND MENU Settings
Adjusting input signal
Adjusting the dynamic range
(See page 19)
It is possible to compress the dynamic range (the difference between
the loudest and quietest audio signals).
This is useful when enjoying surround sound at nighttime.
This function is only available when the source is recorded in Dolby
Digital.
When using the DSP mode effect during playback from an analog
device, the sound will occasionally be distorted due to a overly-
strong input signal. In these instances, it is possible to adjust the
level of the input signal. Only input signals from analog devices (TV
SOUND, VCR, TAPE, AUX, MD, DBS) may be adjusted in this
way.
1.
2.
Open the SOUND MENU.
See page 41, “Opening the SOUND MENU”.
1.
2.
Open the SOUND MENU.
See page 41, “Opening the SOUND MENU”.
Move the pointer to COMPRESSION using the 5/∞
cursors.
Move the pointer to INPUT ATT. using the 5/∞
cursors.
3.
Use the 2/3 cursors to switch between MID,
LARGE, and OFF.
3.
Use the 2/3 cursors to select ON or NORMAL.
MID
: Slightly compresses the dynamic range.
Pressing 2/3 toggles loudness ON or NORMAL.
LARGE : Maximum compression of the dynamic range.
ON
: Recommended to reduce sound distortion.
(recommended for nighttime listening).
NORMAL : Default setting.
OFF
: Choose this option to enjoy surround sound with the
regular dynamic range.
Notes:
• This setting does not affect digital signals.
• When in ON mode, ATT will light up in the display window.
However, when the playback source is digital (DVD, etc.) it will
go off. Lighting up will resume if playback is switched to an
analog device.
• Even while in ON mode, if the DSP mode is turned off (“DSP
OFF”), playback will continue without any reduction of the input
signal.
Adjusting the DSP effect
Adjusting DSP (Digital Signal Processor) effects.
You can make adjustments for each DAP mode and save them in
memory.
1.
2.
Open the SOUND MENU.
Adjusting the sub-woofer output level
See page 41, “Opening the SOUND MENU”.
When the sub-woofer output level is too high, use the LFE
Attenuator to lower the output level.
Move the pointer to DSP EFFECT using the 5/∞
cursors.
1.
2.
Open the SOUND MENU.
See page 41, “Opening the SOUND MENU”.
Move the pointer to LFE ATT. using the 5/∞
cursors.
3.
Use the 2/3 cursors to adjust the DSP effect.
Choose a DSP effect level between 1 ~ 5.
• The pointer cannot be adjusted to the DSP effect when “- -”
appears.
3.
Use the 2/3 cursors to select ON or OFF.
Pressing 2/3 toggles loudness ON/OFF.
ON
: Recommended to reduce sound distortion.
NORMAL : Default setting.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MENU Settings
Use the primary remote control to perform speaker settings with the
on-screen SPEAKER MENU.
Opening the SPEAKER MENU
1.
Stop DVD image playback on the TV screen.
Select a playback source other than the tuner. If the playback
source is set to DVD, press STOP to quit playback.
Buttons used ————————————————
MAIN ON SCREEN, the 2/3/5/∞ cursors, and ENTER.
2.
3.
4.
Press MAIN ON SCREEN.
The MAIN MENU will be displayed.
Move the pointer to the SPEAKER MENU tag using
the 2/3 cursors.
MAIN ON SCREEN
When you are finished with on-screen settings,
press MAIN ON SCREEN again to close the
SPEAKER MENU.
2/3/5/∞ cursors,
and ENTER
Switching speaker mode
1.
Open the SPEAKER MENU.
See “Opening the SPEAKER MENU”.
2.
Move the pointer to STANDARD using the 5/∞
cursors.
Speaker mode
Before performing speaker settings ———————
3.
Use the 2/3 cursors to switch between
STANDARD and EXPERT.
There are two speaker modes, STANDARD and EXPERT.
Enabled options will be highlighted.
STANDARD : This is the default setting for using the speakers that
come with this system.
EXPERT
: Use expert settings when speaker placement
prevents full 3-dimensional surround sound, or
when using speakers other than those that came
with the system.
Speaker mode
When the speaker mode is set to
STANDARD, only the speaker
mode may be changed. Other
options (shown in gray) cannot
be selected.
Setting the speaker mode to
EXPERT enables additional
speaker setting options.
(The enabled options will be
highlighted)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MENU Settings
Playing a test tone
4.
5.
Use the 2/3 cursors to select SPEAKER SIZE.
Pressing the 2/3 cursors toggles between the following
settings.
When you wish to play a test tone, make sure the sound mode is set
to “SURROUND ON” or “THEATER.” The test tone will not play
in other modes.
jSPEAKER SIZEjSPEAKER LEVELjDELAYj
Set speaker size.
Use the 5/∞ cursors to move to the parameter you wish to set,
then adjust the parameter with the 2/3 cursors.
The Note icon on the screen indicates the selected speaker.
1.
Open the SPEAKER MENU.
See page 43, “Opening the SPEAKER MENU”.
2.
3.
Switch the speaker mode to EXPERT.
Note icon
Selected
parameter
Move the pointer to TEST TONE using the 5/∞
cursors.
4.
Press ENTER.
Note icon
Speaker parameters —————————————
Speaker size
Select LARGE when the cone speaker imbedded in the speaker
being used has a diameter of 12 cm or more.
Select SMALL when the diameter is less than 12 cm.
When using this system’s front, center, or rear speakers select
SMALL for each.
Test tones will be played in the following order:
Left Front Speaker = Center Speaker = Right Front Speaker
Selecting LARGE may result in speaker damage.
±
≠
Left Rear Speaker+Right Rear Speaker
F. SP : Sets left and right front speaker size.
Pressing the 2/3 cursors toggles between the following
settings.
SMALL jLARGE
C. SP : Sets center speaker size.
Pressing the 2/3 cursors toggles between the following
settings.
• The note icon on the screen moves to the active speaker.
On the center unit, the audio channel display lamp also
moves to the active speaker, and the name of the active
speaker appears in the display window, reflecting the
configuration of the audio channel display lamps.
• The test tone is 6.
When the F.SP is selected “SMALL”:
SMALL j OFF
When the F.SP is selected “LARGE”:
j SMALL j LARGE j OFF j
• Select OFF when the center speaker is not connected, or
is not in use.
To stop the test tone, move the pointer to TEST TONE and press
ENTER.
Note:
• The test tone stops when the pointer moves from TEST TONE
while the speaker selection box displays “SPEAKER SIZE” or
“DELAY”.
Settings may be
entered while the tone
is sounded only if the
speaker selection box
displays “SPEAKER
LEVEL”.
R. SP : Sets rear speaker size.
Pressing the 2/3 cursors toggles between the following
settings.
Speaker
selection
box
When the F.SP is selected “SMALL”:
SMALL j OFF
When the F.SP is selected “LARGE”:
j SMALL j LARGE j OFF j
• Select OFF when the rear speaker is not connected, or is
not in use.
Setting speaker size
CROSS OVER : When using a small speaker with weak bass as a
front, center, or rear speaker, you can redirect bass
audio to the sub woofer. Select a cross over
frequency to match the size of the small speaker
being used.
1.
Open the SPEAKER MENU.
See page 43, “Opening the SPEAKER MENU”.
Pressing the 2/3 cursors toggles between the
following settings.
2.
3.
Switch the speaker mode to EXPERT.
200Hz j 100Hz j 120Hz
Move the pointer to the speaker selection box
using the 5/∞ cursors.
Cross over frequency
100Hz
Speaker diameter
approx. 10 cm (4”)
approx. 8 cm (3-3/16”)
approx. 4 cm (1-5/8”)
120Hz
200Hz
Speaker
selection box
BASS : BASS is fixed for SUBWOOFER. This cannot be selected
with the pointer.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MENU Settings
Setting speaker level
Adjusting delay time
The delay time for the center speaker and rear speakers is calculated
by comparing the distance between the rear/center speakers and the
listening point with the distance between the front speakers and the
listening point.
1.
Open the SPEAKER MENU.
See page 43, “Opening the SPEAKER MENU”.
2.
3.
Switch the speaker mode to EXPERT.
1.
Open the SPEAKER MENU.
See page 43, “Opening the SPEAKER MENU”.
Move the pointer to the speaker selection box
using the 5/∞ cursors.
2.
3.
Switch the speaker mode to EXPERT.
Use the 2/3 cursors to select SPEAKER LEVEL.
Pressing the 2/3 cursors switches between the following
settings.
Move the pointer to the speaker selection box
jSPEAKER SIZEjSPEAKER LEVELjDELAYj
using the 5/∞ cursors.
Use the 2/3 cursors to select DELAY.
Pressing the 2/3 cursors switches between the following
settings.
jSPEAKER SIZEjSPEAKER LEVELjDELAYj
4.
5.
Play a test tone (only when the DSP mode is set to
“SURROUND ON” or “THEATER”).
Using the 5/∞ cursors, move the pointer to TEST TONE and
press ENTER.
4.
Adjusting delay time.
Notes:
Use the 5/∞ cursors to move the pointer to the parameter you
wish to set. Then adjust the delay time using the 2/3 cursors.
The Note icon on the screen indicates the selected speaker.
• The speaker level can be set without playing a test tone.
• Speakers with speaker size set to OFF will not play a test
tone.
Adjust speaker level.
Use the 5/∞ cursors to move the pointer to the parameter you
wish to set. Then adjust the level using the 2/3 cursors.
The Note icon on the screen indicates the selected speaker.
Note icon
– –
Adjustable
parameters
C. SP : Adjusts the center speaker delay time. Delay time can
be set between 0 ms and 5 ms.
Note icon
Adjustable
parameters
When the distance between the listening point and the
center speaker is close to the distance to the front
speakers, set the delay time to 0 ms. Increase the delay
time when the distance to the center speaker is shorter.
• A 1ms increase/decrease of delay time is equivalent
to a 30 cm change in distance.
C.SP
R.L. SP
R.R. SP
: Adjust center speaker level.
: Adjust left rear speaker level.
: Adjust right rear speaker level.
R. SP : Adjusts the rear speaker delay time.
SUB WOOFER : Adjust sub-woofer level.
Delay time can be set between 0 ms and 15 ms.
When the distance between the listening point and the
rear speakers is close to the distance to the front
speakers, set the delay time to 0 ms. Increase the delay
time when the distance to the rear speakers is shorter.
• A 1ms increase/decrease of delay time is equivalent
to a 30 cm change in distance.
• Each speaker level can be adjusted from –10 dB to +10 dB.
• Speakers marked with a “ – – ” cannot be adjusted.
• The F. SP (Front Speaker) level cannot be adjusted.
• You can save center speaker and rear speaker adjustments
for each DSP mode and save them in memory.
After adjusting speaker levels
• Speakers marked with a “ – – ” cannot be adjusted.
• “CROSS OVER” has the same effect as setting with
“SPEAKER SIZE”.
6.
Stop test tone playback.
Use the 5/∞ cursors to move the pointer to TEST TONE and
press ENTER.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD MENU Settings
Use the primary or secondary remote control to perform DVD
settings with the on-screen DVD MENU.
Opening the DVD MENU
1.
2.
Change source to DVD, and stop playback.
When a Video CD or Audio CD is inserted, press 0 on the
center unit to open the disc tray.
Buttons used ————————————————
DVD ON SCREEN, and the 2/3/5/∞ cursors.
Primary remote control
Press DVD ON SCREEN.
The DVD MENU will be displayed.
DVD ON SCREEN
3.
When you are finished with on-screen settings,
press DVD ON SCREEN to close the DVD MENU.
2/3/5/∞ cursors
Choosing menu language
Some DVD discs feature menu display in multiple languages. With
these discs, it is possible to set the default language for menu
display.
1.
2.
Open the DVD MENU.
See “Opening the DVD MENU”.
Move the pointer to MENU LANGUAGE using the
5/∞ cursors.
Secondary remote control
3.
Use the 2/3 cursors to select a default menu
language.
Pressing the cursors toggles between the following options.
\ ENGLIGH \ SPANISH\ FRENCH \ CHINESE \ GERMAN
\ ITALIAN \ JAPANESE \ language code ( AA ~ ZU) \
(back to the beginning)
DVD ON SCREEN
(See “Appendix A: Table of languages and their abbreviations”.)
Note:
2/3/5/∞ cursors
• When the selected language is not available on the disc, display
will switch to an available language.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD MENU Settings
Choosing audio language
Choosing subtitle language
Some DVD discs feature audio playback in multiple languages.
With these discs, it is possible to set the default language for audio
playback.
Some DVD discs feature subtitle display in multiple languages.
With these discs, it is possible to set the default language for subtitle
display.
1.
2.
Open the DVD MENU.
1.
2.
Open the DVD MENU.
See page 46, “Opening the DVD MENU”.
See page 46, “Opening the DVD MENU”.
Move the pointer to AUDIO LANGUAGE using the
5/∞ cursors.
Move the pointer to SUBTITLE using the 5/∞
cursors.
3.
Use the 2/3 cursors to select a default subtitle
3.
Use the 2/3 cursors to select a default audio
display language.
language.
Pressing the cursors toggles between the following options.
\ ENGLIGH \ SPANISH\ FRENCH \ CHINESE \ GERMAN
\ ITALIAN \ JAPANESE \ language code ( AA ~ ZU) \
(back to the beginning)
Pressing the cursors toggles between the following options.
\ ENGLIGH \ SPANISH\ FRENCH \ CHINESE \ GERMAN
\ ITALIAN \ JAPANESE \ language code ( AA ~ ZU) \
(back to the beginning)
(See “Appendix A: Table of languages and their abbreviations”.)
(See “Appendix A: Table of languages and their abbreviations”.)
Note:
Note:
• When the selected language is not available on the disc, subtitle
• When the selected language is not available on the disc, audio
display will switch to an available language.
playback will switch to an available language.
On-screen guide settings
During DVD playback, an on-screen guide displaying symbols or
letters over the DVD image can be set ON or OFF.
1.
2.
Open the DVD MENU.
See page 46, “Opening the DVD MENU”.
Move the pointer to ON SCREEN GUIDE using the
5/∞ cursors.
3.
Use the 2/3 cursors to select ON or OFF.
Pressing the cursors toggles between ON and OFF.
ON : Icons and letters are displayed.
OFF : Icons and letters are not displayed.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD MENU Settings
Select monitor type
Screen saver settings
Most movie DVD discs are recorded for wide-screen TVs with a
height/width ratio of 16:9. It is possible to optimize playback of
these wide-screen TV images for viewing on a regular TV with a
height/width ratio of 4:3.
Set the screen saver to prevent screen burn.
1.
2.
Open the DVD MENU.
See page 46, “Opening the DVD MENU”.
1.
2.
Open the DVD MENU.
Move the pointer to SCREEN SAVER using the 5/∞
cursors.
See page 46, “Opening the DVD MENU”.
Move the pointer to MONITOR TYPE using the 5/∞
cursors.
3.
Use the 2/3 cursors to select a screen saver
mode.
Pressing the cursors toggles between the following screen
saver modes: MODE 1, MODE 2, DIMMER, and OFF.
3.
Use the 2/3 cursors to select monitor type.
Pressing the cursors toggles between the following monitor
configurations.
MODE 1 : The “screen saver” picture appears and scrolls.
MODE 2 : The “screen saver” picture appears and does not
scroll.
4:3 LB (Letter Box Conversion):
Select this option for playback on a
TV with a height/width ratio of 4:3.
The image will be displayed with a
black bar at the top and bottom of the
screen. The left and right edges of the
image are preserved.
DIMMER : The current picture gets dark.
OFF
: The screen saver function is off.
Notes:
• Select a different mode if the screen flickers when the screen
saver is set to MODE 1.
• When DIMMER is selected, in addition to the screen saver
function, the display window will also be dimmed. To prevent
this, change to a different mode.
• Please be wary of screen burn when the screen saver is turned
OFF.
4:3 PS (Pan-scan Conversion):
Select this option for playback on a
TV with a height/width ratio of 4:3.
The image will be displayed with the
right and left edges cropped. No black
gap will appear at the top and bottom
of the screen.
16 : 9 WIDE (Wide Television Screen 16 : 9):
Select this option for playback
on a wide-screen TV.
Note:
• If the DVD disc is not optimized for Pan-scan, the image will be
shown in 4:3 LB (Letter Box Conversion), even if 4:3 PS (Pan-
scan Conversion) is selected.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Limiting playback by children
This function restricts playback of DVD discs which contain violent
3.
Use the 5/∞ cursors to move the pointer to
(and other) scenes according to the level set by the user.
For example, if a movie which includes violent scenes supports the
parental lock feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
“Set Level”, then use the 2/3 cursors to select the
parental lock level.
Each time you press the 3 cursor, the parental level changes as
follows:
= “LEVEL 1” ~ “LEVEL 8” = “– –” (No restriction) = (back to
the beginning)
To set Parental Lock for the first time
[PARENTAL LOCK]
7 While a DVD disc is stopped or no disc is inserted
From primary remote control:
5
Selected level
• “LEVEL 1” is the strictest level.
Discs rated higher than the level you selected are restricted.
1 • 2 • 3 • 4 • 6
4.
5.
Press ENTER.
Enter your 4-digit password using the number
buttons (0 ~ 9).
1
1.
2.
Press ENTER while holding down STOP.
The PARENTAL LOCK onscreen display appears on the TV
screen.
6.
Press ENTER.
The parental level and password are set.
The pointer moves to “EXIT”.
Use the 5/∞ cursors to move the pointer to
“Country Code”, then use the 2/3 cursors to
select “SA” for country code and press ENTER.
To turn off the PARENTAL LOCK onscreen display
Press ENTER again.
Country code
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Limiting playback by children
To change the settings ————————————
To temporarily release the Parental lock
7 While a DVD disc is stopped or no disc is inserted
When you set the parental level strictly, some discs may not be
played back at all. When you insert such a disc and try to play it, the
Parental Lock on-screen display appears on the TV screen, and the
unit will ask you whether you want the parental lock to be
temporarily released or not.
1. Press ENTER while holding down STOP.
The Parental Lock on-screen display appears on the TV
screen.
2. Enter your current 4-digit password using the
1.
Use the the 5/∞ cursors to move the pointer to
“Temporary”, then use the 2/3 cursors to select
number buttons (0 ~ 9) and press ENTER.
If you enter the wrong password, "WRONG! RETRY……"
appears on the TV screen, and you cannot go to next step.
YES or NO, then press ENTER.
If you select YES, the pointer moves to the PASSWORD field.
When selecting NO, press 0 to remove the disc.
3. Use the 5/∞ cursors to move the pointer to
“Set Level”, then use the 2/3 cursors to select
the parental lock level.
4. Press ENTER.
5. Enter your new 4-digit password using the
number buttons (0 ~ 9) and press ENTER.
The new setting is effective.
2.
Enter your 4-digit password using the number
buttons (0 ~ 9).
If you enter the wrong password, “WRONG! RETRY…”
appears on the TV screen, and you cannot go to next step.
Notes:
• When you enter the wrong password more than 3 times in step 2
above, the pointer moves to “EXIT” automatically and the
5/∞ cursors does not work.
• If you forget your password in step 2, enter “8888.”
• The Parental lock is released, and the unit starts playback.
Note:
• When you enter the wrong password more than 3 times in step 2
above, moves to “NO” automatically and the 5/∞ cursors does
not work.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and handling of discs
How to handle discs
When handling a disc, do not touch the surface of the disc.
Since discs are made of plastic, they are easily damaged.
If a disc gets dirty, dusty, scratched or warped, the imagesand sound will not be
picked up correctly, and such a discmay cause the player to malfunction.
Label side ————————————————————————————————————————
Do not damage the label side, stick paper to or use any adhesive on its surface.
Storage —————————————————————————————————————————
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases,they can be damaged.
Do not put discs in a location where they may be exposed to direct sunlight, or in a placewhere the humidity or temperature is high.
Avoid leaving discs in your car!
Maintenance of discs ———————————————————————————————————
If there are fingerprints or other dirt adhering to a disc,wipe with a soft dry cloth,
moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
CAUTION:
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up toindustry standards.)
These symptoms are caused by the discs, not by the malfunction of the center unit.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC video components (TV and VCR) through the center unit.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1 ———————————————————————————————————————
TV
VCR
CAUTION:
Notes:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the TV SOUND/DBS jacks on the center unit.
• Refer also to the manual supplied with your video components.
CONNECTIONS 2 ———————————————————————————————————————
CASE 1 : If the components are equipped with the S-video terminals.
CASE 2 : If the components are not equipped with the S-video terminals.
DO NOT use these video terminals.
To Video input 1
VCR
TV
TV
VCR
To Video input 2
DO NOT use these video terminals.
CASE 3 : If only the VCR is equipped with the S-video terminal.
To Video input 1
CASE 4 : If only the VCR is not equipped with the S-video terminal.
DO NOT use these video terminals.
To Video input 1
VCR
TV
TV
VCR
To Video input 2
To Video input 2
DO NOT use these video terminals.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK Remote Control System
Automatic Selection of TV’s Input Mode —————
• When you select “TV SOUND” as the source to play on the
center unit, the TV automatically changes the input mode to the
TV tuner so that you can watch TV.
• When you select “VCR” or “DBS” (or “DBS DIGITAL”) as the
source to play on the center unit, the TV automatically changes
the input mode to the appropriate position (either Video Input 1 or
Video Input 2) so that you can view the playback picture.
1.
2.
3.
4.
If you have already plugged your VCR, TV, and
center unit into the AC outlets, unplug their AC
power cords first.
Connect your VCR, TV, and center unit as follows,
using the cables with the monaural mini-plugs.
• See “CONNECTIONS 1” on the previous page.
Note:
• When you select “TV SOUND” as the source on the center unit,
you cannot see the menu on the TV screen since the AV COMPU
LINK remote control system automatically changes the TV’s
input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen displays after changing the TV’s input
mode to the appropriate position (either Video Input 1 or Video
Input 2) the center unit is connected to.
Connect the audio input/output jacks on VCR, TV,
and center unit using the cables with RCA pin plug
• See pages 8 and 9.
Connect the video input/output jacks on VCR, TV,
and center unit, using the cables with RCA pin plug
or with S-video plug.
• See “CONNECTIONS 2” on the previous page.
Automatic Power On/Off ————————————
The TV and VCR turn on and off along with the center unit.
When you turn on the center unit;
• If the previously selected source is “DVD” the TV will turn on
automatically.
• If the previously selected source is “VCR” the TV and VCR will
turn on automatically.
• If the previously selected source is “TV SOUND” or “DBS” (or
“DBS DIGITAL”), only the TV will turn on automatically.
5.
6.
Plug the AC power cords of the components into
the AC outlets.
When turning on the TV for the first time after the
AV COMPU LINK connection, turn the TV volume to
the minimum using the TV volume control on the
TV.
When you turn off the center unit, the TV and VCR will turn off.
The AV COMPU LINK remote control system allows you to
use the four basic functions listed below.
Notes:
• When system power is ON:
If the television monitor power is OFF, starting DVD playback
will not turn on the television monitor. Please perform the
necessary operations directly with the television monitor.
• If you turn off the center unit while recording on the VCR, the
VCR will not turn off, but continue recording.
• When “TV SOUND” is selected, in order for the AV COMPU
LINK to change television input to “TV,” the onscreen display
will not be viewable on the television monitor. To view the
onscreen display, set the television monitor to the correct video
input.
Remote control of the TV and VCR using this remote
control———————————————————
See page 55 for details.
For the VCR and the TV:
• Aim the remote control directly at the remote sensor on each
component.
One-Touch Video Play—————————————
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy the video playback without setting other
switches manually. The center unit automatically turns on and
changes the source to “VCR.”
• When connected to a television with a DBS tuner, the television’s
automatic DBS switch will not operate.
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(3) button on the VCR or on the remote control. So, you can get the
same result.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPU LINK Remote Control System
The COMPU LINK remote control system allows you to operate
JVC audio components through the remote sensor on the center unit.
Remote Control through the Remote Sensor on the
center unit —————————————————
You can control the connected audio components through the remote
To use this remote control system, you need to connect JVC audio
sensor on the center unit using this remote control. Aim the remote
components through the COMPU LINK-3 (SYNCHRO) jacks (see
control directly at the remote sensor on the center unit. For details,
below) in addition to the connections using cables with RCA pin
see page 10.
plugs (see pages 8 and 9).
• Make sure that the AC power cords of these components are
Automatic Source Selection ——————————
unplugged before connection. Plug the AC power cords only after
When you press the play (3) button on a connected component or
all connections are complete.
on its own remote control, the center unit automatically turns on and
changes the source to the component. On the other hand, if you
select a new source on the center unit or on the remote control, the
selected component begins playing immediately.
In both cases, the previously selected source continues playing
without sound for a few seconds.
Cassette deck
or
MD recorder
Automatic Power On/Off (Standby): only possible with
the COMPU LINK-3 connection —————————
Cassette deck (or MD recorder) turns on and off (standby) along with
the center unit.
When you turn on the center unit, the cassette deck (or MD recorder)
will turn on automatically, depending on which component has been
previously selected.
When you turn off the center unit, the cassette deck (or MD recorder)
will turn off (standby).
Notes:
• If your audio component has two COMPU LINK-3 (SYNCHRO)
jacks, you can use either one.
• To operate the cassette deck or MD recorder using the COMPU
LINK remote control system, set the source name correctly.(see
page 17).
• Refer also to the manuals supplied with your audio components.
This remote control system allows you to use three functions
listed right.
• Synchro recording for the casette deck or MD recorder using the
COMPU LINK remote control system is not compatible with the
center unit.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatingJVC’sAudio/VideoComponents
You can operate JVC’s audio and video components with this system’s remote control, since control signals for JVCcomponents are preset
in the remote control.
IMPORTANT:
To operate JVC’s audio components using this remote control:
• You need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see page 54) in addition to the connections
using cables with RCA pin plugs (see pages 8 and 9).
• Aim the remote control directly at the remote sensor on the center unit.
• If you use the buttons on the front panel or the menu function to choose a source, the remote control will not operate that source. To
operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.
• To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly (see page 17).
• Refer also to the manuals supplied with your components.
To operate JVC’s video components using this remote control:
• You need to connect JVC video components through the AV COMPU LINK terminals (see page 52) in addition to the connections using
cables with RCA pin plugs (see pages 8 and 9).
• Some JVC VCRs can accept two types of the control signals — remote code “A” and “B.” Before using this remote control, make sure that
the remote control code of the VCR is set to code “A.”
• When using the remote control:
– Aim the remote control directly at the remote sensor on each component, not on the center unit.
Primary remote control
Secondary remote control
Check to see if its
remote control mode
selector is set to the
correct position.
To operate the audio
system, TVs, and
VCRs, set it to
“AUDIO/TV/VCR.”
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating JVC’s Audio/Video Components
Cassette deck ————————————————
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a cassette deck:
TV ————————————————————
You can always perform the following operations (with the remote
control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS : Turns on or off the TV.
TV VOL +/– : Adjusts the volume.
PLAY : Starts playing.
1
: Fast winds the tape from right to left.
: Fast winds the tape from left to right.
TV/VIDEO
: Sets the input mode (either TV or VIDEO).
After pressing TV/DBS (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a TV:
¡
STOP : Stops operations.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PLAY button to start
recording.
CHANNEL +/– : Changes the channels.
1 ~ 9, 0, 100+ : Selects the channels.
Press this button with the PAUSE button to enter
recording pause.
TV RETURN : Alternates between the previously selected
channel and the current channel.
MD recorder ————————————————
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the MD recorder:
PLAY : Starts playing.
4
: Returns to the beginning of the current (or previous)
track.
¢
: Skips to the beginning of the next track.
STOP : Stops playing.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PAUSE to enter recording
pause. Then press PLAY to start recording.
After pressing TAPE/MD:
1 ~ 9, 0 : Selects the track.
Note:
• You can use either TAPE/MD button or the TAPE/MD CONTROL
button to activate the buttons listed above. If you press TAPE/MD,
the playing source also changes. On the other hand, if you press
TAPE/MD CONTROL, the playing source does not change.
VCR ————————————————————
You can always perform the following operations (with the remote
control mode selector set to “AUDIO/TV/VCR”):
on or off the VCR.
VCR: Turns
After pressing VCR or VCR CONTROL (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can perform the
following operations on the VCR:
PLAY : Starts playing.
1
: Rewinds a tape.
: Fast winds a tape.
¡
STOP : Stops operations.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
After pressing VCR:
1 ~ 9, 0 : Selects the TV channels on VCR.
CHANNEL +/– : Changes the TV channels on the VCR.
Note:
• You can use either VCR button or the VCR CONTROL button to
activate the buttons listed above. If you press VCR, the playing
source also changes. On the other hand, if you press VCR
CONTROL, the playing source does not change.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control
signals for other manufacturers’VCRs, TVs, CATV converters and
DBS tuners. By changing the transmittable signals from preset ones
to the other manufacturers’, you can operate the other
To change the transmittable signals for operating
another manufacturer’s TV ———————————
1.
2.
3.
4.
Set the remote control mode to “AUDIO/TV/VCR.”
manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer’s code
each for VCR, TV, CATV converters, and DBS tuner.
Press and hold
Press TV/DBS.
TV/CATV/DBS.
Primary remote control
Enter manufacturer’s code (two digits) using
buttons 1 ~ 9, and 0.
See the list on below to find the code.
Examples: For a JVC product, press 0 then 1.
For a Hitachi product, press 1 then 0.
5.
Release
TV/CATV/DBS.
The following buttons can be used for operating the TV (with
the remote control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS : Turns on and off the TV.
TV VOL +/– : Adjusts the volume.
TV/VIDEO : Sets the input mode (either TV or VIDEO).
Check to see if its
remote control mode
selector is set to the
correct position.
To operate the audio
system, TVs, and
VCRs, set it to
“AUDIO/TV/VCR.”
To operate the CATV
converter and DBS
tuner, set it to
After pressing TV/DBS (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations on a TV:
CHANNEL +/– : Changes the channels.
1 ~ 10, 0, 100+ (+10) : Selects the channels.
100+ (+10) button will function as the
ENTER button if your TV requires
pressing ENTER after selecting a channel
number.
“CATV/DBS.”
Note:
• Refer to the manual supplied with your TV.
6.
Try to operate your TV by pressing
TV/CATV/DBS.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV, try
each one until the correct one is entered.
Manufacturer
JVC
HITACHI
MAGNAVOX
MITSUBISHI
PANASONIC 04, 11
RCA 05
Code Manufacturer Code
01
10
02
03
SAMSUNG
SANYO
SHARP
12
13
06
07
08
09
SONY
TOSHIBA
ZENITH
Manufactures’codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ Video Equipment
To change the transmittable signals for operating a
CATV converter or DBS tuner ——————————
To change the transmittable signals for operating
another manufacturer’s VCR ——————————
1.
2.
3.
4.
Set the remote control mode to “CATV/DBS.”
1.
2.
3.
4.
Set the remote control mode to “AUDIO/TV/VCR.”
Press and hold
Press TV/DBS.
TV/CATV/DBS.
Press and hold
Press VCR.
VCR.
Enter manufacturer’s code (two digits) using
Enter manufacturer’s code (two digits) using
buttons 1 ~ 9, and 0.
See the list on below to find the code.
Examples: For a Echostar product, press 2 then 1.
For a Pioneer product, press 1 then 3.
buttons 1 ~ 9, and 0.
See the list on below to find the code.
Examples: For a JVC product, press 0 then 1.
For a Funai product, press 1 then 0.
5.
Release
TV/CATV/DBS.
5.
Release
VCR.
After setting the remote control mode selector to “CATV/DBS,”
you can perform the following operations on the CATV convertor
or on the DBS tuner:
Following button can be used for operating the VCR (with the
remote control mode selector set to “AUDIO/TV/VCR”):
VCR : Turns on and off the VCR.
TV/CATV/DBS
CHANNEL +/–
1 ~ 10, 0, 100+ (+10) : Selects the channel.
100+ (+10) button will function as the
: Turns on and off the CATV converter
or DBS tuner.
: Changes the channels.
After pressing VCR or VCR CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
PLAY : Starts playback.
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
1
: Rewinds a video tape.
: Fast winds a video tape.
¡
STOP : Stops operation.
PAUSE : Pauses.
¶ REC : Starts recording or enters recording pause.
Note:
• Refer to the manual supplied with your CATV converter or
DBS tuner.
After pressing VCR:
CHANNEL +/– : Changes the TV channels on the VCR.
1 ~ 10, 0, 100+ (+10) : Selects the TV channels.
100+ (+10) button will function as the
ENTER button if your VCR requires
6.
Try to operate your CATV converter or DBS tuner by
pressing
TV/CATV/DBS.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
pressing ENTER after selecting a channel
number.
If there are more than one code listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is
entered.
Notes:
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL
button to activate the buttons listed above. If you press VCR,
the playing source also changes. On the other hand, if you
press VCR CONTROL, the playing source does not change.
Manufacturer
ECHOSTAR
GI JERROLD
Code
21
01, 02, 03, 04, 05,
06, 07, 08
15, 16, 17, 18
13, 14
6.
Try to operate your VCR by pressing
VCR.
HAMLIN/REGAL
PIONEER
When your VCR turns on or off, you have entered the correct
code.
RCA
19
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
SCIENTIFIC ATLANTA
SONY
09, 10
20
ZENITH
11, 12
Manufacturer
JVC
EMERSON
FISHER
FUNAI
GOLD STAR 12
HITACHI 04
MITSUBISHI 13
NEC 25
PANASONIC 07, 17
Code
01, 02, 03
11, 26
Manufacturer
PHILIPS
RCA
Code
09
05, 06
Manufactures’codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
29
SAMSUNG 24
10, 14, 15, 16 SANYO
21, 22, 23
27, 28
30
18, 19, 20
08
SHARP
SHINTOM
SONY
ZENITH
Manufactures’codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Use this chart to help you solvi daily operational problems. If there is anyproblem you cannot solve, conect your JVC service center.
POSSIBLE CAUSE
The power cord.
PROBLEM
SOLUTION
Power does not come on.
Insert the plug into the socket.
Power is not supplied to the powered
sub-woofer
The power cord has been pulled out of the
AC outlet.
The system cable is not connected.
Press the
button on the center unit to
switch power OFF, and then press it again to
switch power ON.
The remote control does not work.
It is too far from the center unit, or is not
facing the center unit.
Avoid any obstacles within approximately 5 m
of the detector on the remote control.
There is something obstructing the remote
sensor.
The battery is flat.
Replace the battery.
The battery has been inserted the wrong way
round (+/–).
Insert the battery correctly.
Sunlight is falling directly on the detector.
Shade the remote control from direct sunlight.
Enter the correct code number.
The entered manufacturers code number is
incorrect.
No sound.
The system cable is not connected.
Check the connection.
Check the connection.
Reconnect the speaker cord and press
the center unit to restart the system.
The speaker cord is not connected.
There is a short in the speaker cord.
on
The powered sub woofer power supply is off.
Insert the plug firmly into the socket and press
on the center unit to switch power off, and
then press it again to switch power on.
The audio cord is not connected properly.
An incorrect source has been selected.
Muteing is on.
Connect the cord properly.
Select the correct source.
Press MUTING to clear mute.
Connect the cord properly.
Adjust balance.
The speaker cord is not connected correctly.
Left-right balance is incorrect.
Sound is emitted from only one speaker.
No video.
The video cord is not connected properly.
TV input select is incorrect.
Connect the cord properly.
Select the correct input.
Replace the disc.
The unit and disc region numbers (local
numbers) are incompatible.
Cannot play a disc.
The disc is dirty.
Clean the disc.
Video and audio are distorted.
A video deck is connected between the
center unit and the TV.
Connect the center unit and TV directly.
Initial setup (monitor type) was incorrect.
The TV has been set up incorrectly.
The received signal is too weak.
Run through initial setup again correctly.
Set up the TV correctly.
The edge is missing on the video image.
Continuous static during FM broadcasts.
Connect an external FM antenna, or contact
your dealer.
The station is too far away.
Select another station.
Check the connection.
The antenna is not connected correctly.
Lightning and electronic noise interferes
with operation of the microcomputer.
Switch power off, and remove and re-insert the
power plug in the socket.
Unit does not work correctly.
Immediately after beginning to heat the
room, the unit was moved to a cold location
causing condensation to form inside.
Switch power off and leave the unit a few
hours before switching power on again.
The remote control mode selector is not set
correctly.
Set the selector correctly either to “AUDIO/
TV/VCR” or to “CATV/DBS.”
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Center unit (XV-THA10)
Audio section
Dynamic Range 97 dB
Total Harmonic Distortion 0.007%
Output Level 2.0 V RMS
Video section
Horizontal Resolution 500 lines
Signal-to-Noise Ratio 60 dB
Output Level S-video-Y: 1.0 V (p-p)/75 Ω
S-video-C: 0.286 V (p-p)/75 Ω
Composite: 1.0 V (p-p)/75 Ω
Tuner section
Tunig Range FM: 87.5 MHz to 108.0 MHz
AM: 531 kHz to 1 602 kHz (9 kHz step)
530 kHz to 1 600 kHz (10 kHz step)
Usable Sensitivity FM: 12.8 dbf (1.2 µV/75 Ω)
AM loop antenna: 400 µV/m
Dimensions (W × H × D) 403 mm × 85 mm × 273.5 mm (15-15/16 inches × 3-3/8 inches × 10-13/16 inches)
Mass 5.0 kg (11 lbs)
Power Requirements AC 230 V
, 50 Hz/60 Hz
Power Comsumption 27 W (at operation)
3 W (in standby mode)
Powered Sub-woofer (SP-PWA10)
Amplifier section
Output Level Front/Surround/Center: 20 W × 5, 4 Ω, 1 kHz, 0.7% THD
Woofer: 100 W, 4 Ω, 100 Hz, 0.7% THD
Speaker section
Speaker 10 inches (25 cm), bass-reflex
Frequency Range 25 Hz to 200 Hz
Dimensions (W × H × D) 280 mm × 475 mm × 506 mm (11-1/16 inches × 18-3/4 inches × 19-15/16 inches)
Mass 18.8 kg (41.3 lbs)
Power Requirements AC 230 V
Power Comsumption 120 W
, 50 Hz/60 Hz
Satellite Speakers (SP-XSA10)
Speakers 7 cm × 4 cm (2-13/16 inches × 1-5/8 inches) bass-reflex, Magnetically Shielded
Power Handling Capacity 30 W
Frequency Range 110 Hz to 20 kHz
Dimensions (W × H × D) 62 mm × 102 mm × 109 mm (2-1/2 inches × 4-1/16 inches × 4-5/16 inches)
Mass 440 g (0.98 lbs)
Center Speaker (SP-XCA10)
Speakers 7 cm × 4 cm (2-13/16 inches × 1-5/8 inches) bass-reflex, Magnetically Shielded
Power Handling Capacity 30 W
Frequency Range 100 Hz to 20 kHz
Dimensions (W × H × D) 152 mm × 62 mm × 109 mm (6 inches × 2-1/2 inches × 4-5/16 inches)
Mass 475 g (1.1 lbs)
Designs & specifications are subject to change without notice.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Table of languages and their abbreviations
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations.
To select the desired language, select the abbreviation corresponding the language you want to.
RN
RO
RU
RW
SA
SD
SG
SH
SI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Afar
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Inupiak
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
SL
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Kirghiz
Latin
Lingala
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
LV
MG
MI
Telugu
Tajik
Thai
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
EO
ET
EU
FA
FI
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
PL
PS
PT
QU
RM
IE
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Country code list for parental lock
This list is used for the parental Lock operation. For details, see page 49.
AD
AE
AF
AG
AI
Andorra
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
ET
FI
Cameroon
China
GR
GS
Greece
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
South Georgia and the
South Sandwich Islands
Guatemala
Guam
Colombia
Costa Rica
Cuba
GT
GU
GW
GY
HK
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
Albania
Cape Verde
Christmas Island
Cyprus
Guinea-Bissau
Guyana
Armenia
Netherlands Antilles
Angola
Hong Kong
Heard Island and
McDonald Islands
Honduras
Czech Republic
Germany
HM
Antarctica
Argentina
Djibouti
HN
HR
HT
HU
ID
American Samoa
Austria
Denmark
Croatia
Dominica
Dominican Republic
Algeria
Haiti
Australia
Hungary
Aruba
Indonesia
Azerbaijan
Bosnia and Herzegovina
Barbados
Ecuador
IE
Ireland
Estonia
IL
Israel
Egypt
IN
India
Bangladesh
Belgium
Western Sahara
Eritrea
IO
British Indian Ocean
Territory
Burkina Faso
Bulgaria
Spain
IQ
Iraq
BG
BH
BI
Ethiopia
IR
Iran (Islamic Republic of)
Iceland
Bahrain
Finland
IS
Burundi
FJ
Fiji
IT
Italy
BJ
Benin
FK
Falkland Islands
(Malvinas)
Micronesia
(Fedelated States of)
Faroe Islands
France
JM
JO
JP
KE
KG
KH
KI
Jamaica
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
Bermuda
Jordan
Brunei Darussalam
Bolivia
FM
Japan
Kenya
Brazil
FO
FR
Kyrgyzstan
Cambodia
Bahamas
Bhutan
FX
France, Metropolitan
Gabon
Kiribati
Bouvet Island
Botswana
GA
GB
GD
GE
GF
GH
GI
KM
KN
KP
Comoros
United Kingdom
Grenada
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
Korea, Republic of
Kuwait
Belarus
Belize
Georgia
Canada
French Guiana
Ghana
KR
KW
KY
KZ
LA
Cocos (Keeling) Islands
Central African Republic
Congo
Gibraltar
Cayman Islands
Kazakhstan
Lao People’s Democratic
Republic
CG
CH
CI
GL
GM
GN
GP
GQ
Greenland
Gambia
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Guinea
CK
CL
Guadeloupe
Equatorial Guinea
LB
LC
Lebanon
Saint Lucia
62
Download from Www.Somanuals.com. All Manuals Search And Download.
LI
Liechtenstein
Sri Lanka
Liberia
PE
PF
Peru
TJ
Tajikistan
LK
French Polynesia
Papua New Guinea
Philippines
Pakistan
TK
TM
TN
TO
TP
TR
TT
TV
TW
Tokelau
LR
PG
PH
PK
PL
Turkmenistan
Tunisia
LS
Lesotho
LT
Lithuania
Luxembourg
Latvia
Tonga
LU
LV
Poland
East Timor
Turkey
PM
Saint Pierre and
Miquelon
LY
Libyan Arab Jamahiriya
Morocco
Trinidad and Tobago
Tuvalu
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
PN
PR
PT
Pitcairn
Monaco
Puerto Rico
Portugal
Taiwan, Province of
China
Moldova, Republic of
Madagascar
Marshall Islands
Mali
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Palau
TZ
Tanzania, United
Republic of
Ukraine
Paraguay
Qatar
UA
UG
UM
Myanmar
Mongolia
Macau
Réunion
Uganda
Romania
United States Minor
Outlying Islands
United States
Uruguay
Russian Federation
Rwanda
Northern Mariana
Islands
US
UY
UZ
VA
Saudi Arabia
Solomon Islands
Seychelles
Sudan
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
Martinique
Mauritania
Montserrat
Malta
Uzbekistan
Vatican City State
(Holy See)
Sweden
VC
Saint Vincent and the
Grenadines
Venezuela
Mauritius
Maldives
Singapore
Saint Helena
Slovenia
VE
VG
VI
Malawi
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Mexico
SJ
Svalbard and Jan Mayen
Slovakia
Malaysia
SK
SL
VN
VU
WF
Mozambique
Namibia
Sierra Leone
San Marino
Senegal
Vanuatu
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
Wallis and Futuna
Islands
New Caledonia
Niger
Somalia
WS
YE
Samoa
Norfolk Island
Nigeria
Suriname
Yemen
NG
NI
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
YT
Mayotte
Nicaragua
Netherlands
Norway
YU
ZA
ZM
ZR
Yugoslavia
South Africa
Zambia
NL
NO
NP
NR
NU
NZ
OM
PA
Nepal
Turks and Caicos Islands
Chad
Zaire
Nauru
ZW
Zimbabwe
Niue
French Southern
Territories
New Zealand
Oman
TG
TH
Togo
Panama
Thailand
63
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN. SP
0900TNMNATJSC
J
C
V
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Example
DVD DIGITAL THEATER SYSTEM
TH-A10
To attach non-slip rubbers to the center
speaker
Satellite speaker
(front left stpeker)
Center speaker
Simplified connection manual
Attach the supplied non-slip rubbers at three points on the
bottom of the center speaker.
Please see INSTRUCTIONS from page 6 to page 10 as well.
English
The non-slip rubbers are
adhesive. Peel off the seal
before applying.
TV
Please see the reverse page.
LVT0517-006A
Attach non-slip rubbers at
the three points shown in the
diagram.
Powered sub-woofer
Attach two rubbers at left
and right at the front of the
speaker, and one in the
middle at the rear.
FM and AM antenna terminals (6)
Center unit
S-video cable
(not supplied)
XV-THA10
Digital input and
output terminals (9)
S-video output and
input terminals (6, 8, 9)
Connect to the TV if
it has an S-video in-
put (for higher image
quality). Connect the
cables with the £
mark facing down.
(Center unit)
Non-slip rubber
Satellite speaker
(front right speaker)
1 cm (7/16”)
5 cm (2”)
Satellite speaker
(rear left speaker)
CAUTIONS:
• For safety reasons, always ensure
that there is sufficient place behind
the powered sub-woofer.
• If the front and rear speakers are
placed on the floor, always ensure
that they are level.
The rear speakers are
placed behind the
listening position.
Front side
Bottom
AC power cord (supplied) (10)
COMPU LINK
Before plugging the center unit
into anAC outlet, make sure that
all connections have been made.
terminals (52, 54)
Analog audio input and output terminals (8, 9)
VIDEO OUT SELECT (7)
Satellite speaker
(rear right speaker)
Video cable (supplied) (6)
Connect the MONITOR OUT
terminal to composit video
input terminal on the TV.
Yellow
Ensure that
To hang satellite speakers from the wall
Audio channel display lamp
Uses lamps to display the audio channel configuration for the
disc currently playing.
the £ mark
on the plug
faces upwards.
Yellow
Use the supplied bracket to fix satellite speakers to the wall.
To connect speakers (7)
CAUTION: ATTACHING THE BRACKETS ON THE WALL
When attaching the brackets on the wall, have them attached to the wall by a qualified
person.
DO NOT attach the brackets on the wall by yourself to avoid an unexpected damage of
their falling from the wall, caused by incorrect attachment or weakness in the wall.
Connect the satellite speakers and center
speaker to the terminals on the powered
subwoofer using the speaker cords supplied.
Labels are attached to the speaker cords to
indicate the speaker and terminal to which
each is to be connected.
• The audio channel
display lamp is not
an indicator of
which speakers are
producing sound.
System cable (supplied) (6)
Connect the center unit to
powered sub woofer.
SP-PWA10 (Powered sub woofer)
• The four satellite speakers may be used at
either front or rear.
Location of attachment to wall:
• Ensure that the left and right speakers are
connected to left and right respectively, and
that they are connected with the correct
polarity (+ve, –ve). The white speaker cord
connects to the + terminal, and the black
speaker cord connects to the – terminal.
Ensure that the £
mark on the plug
faces to the right.
Care is required in selecting a location for attaching satellite speakers to the wall.
Injury to personnel, or damage to equipment, may result if the speakers are attached in a
location which interferes with daily activities.
The lamps refer to the speaker channel as follows.
L: Left front speaker channnel
R: Right front speaker channel
C: Center speaker channel
Twist and remove
Center speaker
the insulation at the
end of each speaker
cord.
Attaching speakers to the bracket
RS: Right surround speaker channel
LS: Left surround speaker channel
S: Rear speaker channel (monaural)
LFE: Sub woofer channel
Front right speaker
Front left speaker
1.
Use the screw supplied to attach the
speaker to the bracket.
2.
Adjusting the angle of the satellite
speakers
The angle of the speaker may be adjusted
in the front-rear and left-right directions
along the channel in the bracket.
When adjusting the angle, loosen the
screw slightly, make the adjustment, and
then tighten the screw firmly.
Speaker cord (6 m)
(19.7 ft)
The lamp display indicates the type of disc (DVD or CD)
currently playing as follows.
Example:
With Dolby Digital 5.1 ch, DTS Digital 5.1 ch, or MPEG
Multichannel 5.1 ch surround
White
Tilting the speaker to the front
Black
CAUTION:
If the screw is not
With Dolby Digital (Lt/Rt)
tightened firmly, it may
cause injury to personnel
or damage to equipment.
Bracket
Screw
Rear right
speaker
Rear left
speaker
To AC outlet
With stereo sound (eg Audio CD)
Tilting left-right
Before plugging the powered sub woofer
into an AC outlet, make sure that all
connections have been made.
Note:
• Mixing up the polarity
of the speaker cords
can reduce the stereo
effect and sound
quality.
Speaker cord
(15 m) (49.2 ft)
When playing DVD recorded in Dolby Digital, Dolby Pro Logic,
DTS, or MPEG Multichannnel Surround Sound, set the main
system surround mode to “SURROUND ON.”
When it is set to “SURROUND OFF” the audio channel display
lamp will not change. However, sound will be played without
surround effects (see page 21).
0900TNMNATJSC
J
C
V
EN, FR
Download from Www.Somanuals.com. All Manuals Search And Download.
Instalación
Ejemplo
SISTEMA DE CINE DIGITAL DVD
TH-A10
Colocación de gomas antideslizantes al
altavoz central
Altavoz satélite
(altavoz frontal
izquierdo)
Altavoz central
Manual de conexión simplificado
Coloque las gomas antideslizantes que se suministran en
tres puntos en la parte inferior del altavoz central.
Por favor lea también las INSTRUCCIONES desde la página 6 hasta la 10.
Español
Las gomas antideslizantes
son adhesivas. Quite el papel
antes de colocarlos.
TV
Vea la página posterior.
Coloque las gomas
antideslizantes en los tres
puntos que se indican en el
esquema.
Coloque dos gomas a la
izquierda y a la derecha en
la parte delantera del altavoz
y otra centrada en la parte
Subwoofer alimentado
Cable S-video
Terminales de antena FM y AM (6)
Unidad central
(no se suministra)
Conecte a laTV si dis-
pone de una entrada
S-video (para una
calidad de imagen su-
perior). Conecte los
cables con la marca
£ hacia abajo.
XV-THA10
Terminales digitales
de entrada y salida (9)
Terminales S-video de
entrada y salida (6, 8, 9)
(Unidad central)
trasera.
Goma antideslizante
Altavoz satélite
1 cm
5 cm
(altavoz frontal
derecho)
Altavoz satélite
(altavoz trasero
izquierdo)
PRECAUCIONES:
• Por razones de seguridad, asegúrese
que haya siempre suficiente espacio
detrás del subwoofer alimentado.
• Si los altavoces frontales y
posteriores están colocados en el
suelo, asegúrese que se encuentran
nivelados.
A la entrada
S-vídeo
Cara frontal
Los altavoces traseros
se colocan por detrás de
la posición de escucha.
Parte inferior
Cable de alimentación CA
(suministrado) (10)
Antes de conectar la unidad cen-
tral a la red, asegúrese que se han
realizado todas las conexiones.
Terminales
COMPU LINK (52, 54)
VIDEO OUT SELECT (7)
Terminales analógicos de entrada y salida
de audio (8, 9)
Altavoz satélite
(altavoz trasero derecho)
Cable vídeo (suministrado) (6)
Conecte el terminal MONI-
TOR OUT a la entrada de
vídeo compuesto de la TV.
A la entrada de
vídeo
compuesta
Amarillo
Asegúrese que
la marca £
del conector
está hacia
Colocación de altavoces satélite en la pared
Indicador de canal de audio
Utilice los indicadores para visualizar la configuración del
canal de audio del disco que se está reproduciendo actualmente.
Utilice los soportes murales que se suministran para sujetar los altavoces satélite a la pared.
Amarillo
arriba.
Conexión de altavoces (7)
PRECAUCIÓN: SUJECIÓN DE SOPORTES EN LA PARED
Conecte los altavoces satélite y el altavoz
central a los terminales situados en el
subwoofer con tensión mediante los cables
para altavoz suministrados.
Las etiquetas colocadas en los cables del
altavoz indican el altavoz y el terminal al que
deben ser conectados.
Solicite los servicios de una persona cualificada para fijar los soportes a la pared.
NO coloque los soportes por sí mismo para evitar cualquier daño imprevisible provocado
por la caída de los mismos debido a una sujeción inadecuada o a la fragilidad en la pared.
• El indicador del
canal de audio no
muestra qué
altavoces están
produciendo
Cable del sistema
(suministrado) (6)
Conecta la unidad central al
sub-woofer alimentado.
SP-PWA10 (Subwoofer alimentado)
Ubicación del soporte en la pared:
sonido.
• Los cuatro altavoces satélite pueden
colocarse tanto delante como detrás.
• Asegúrese que los altavoces izquierdo y
derecho están conectados a la izquierda y
derecha respectivamente y que están
conectados con la polaridad correcta (+ve,
–ve). El cable blanco se conecta al terminal
+ y el cable negro al terminal – .
Se deberá tomar las debidas precauciones para seleccionar una ubicación para la
colocación de los altavoces satélite en la pared.
La colocación de los altavoces en una ubicación que interfiera con los quehaceres
diarios podría resultar en lesiones personales o daños en el equipo.
Asegúrese que la
marca £ en el
conector está hacia
la derecha.
Los indicadores muestran el canal del altavoz de la siguiente
manera.
L: Canal de altavoz frontal izquierdo
R: Canal de altavoz frontal derecho
C: Canal de altavoz central
Sujeción de los altavoces al soporte
Altavoz central
Pele el extremo de
cada cable de los
altavoces.
RS: Canal de altavoz surround derecho
LS: Canal de altavoz surround izquierdo
S: Canal de altavoz trasero (monaural)
LFE: Canal de subwoofer
Altavoz frontal derecho
Altavoz frontal izquierdo
1.
Utilice la mariposa suministrada para
sujetar el altavoz al soporte.
2.
Ajuste del ángulo de los altavoces
satélite
El ángulo del altavoz puede ajustarse en
las direcciones adelante-atrás e izda-dcha a
lo largo de la canaleta del soporte.
Cuando se ajuste el ángulo, suelte
ligeramente la mariposa, haga el ajuste y
vuelva a apretarlo con firmeza.
Cable de altavoz
(6 m)
El display de bombillas indica el tipo de disco (DVD o CD) que
se está reproduciendo de la siguiente manera.
Ejemplo:
Con Dolby Digital 5,1 ch, DTS Digital 5,1 ch, o MPEG Multicanal
5,1 ch surround
Inclinación del altavoz hacia delante
Blanco
Negro
PRECAUCIÓN:
Si no se aprieta la
mariposa con firmeza
puede provocar lesiones
personales o daños en el
equipo.
Con Dolby Digital (Lt/Rt)
Soporte
Altavoz
trasero
derecho
Altavoz
Mariposa
trasero
izquierdo
A la toma de red CA
Inclinación izda-dcha
Asegúrese que se hayan realizado todas
las conexiones antes de conectar el
subwoofer a la toma de la red.
Con sonido estéreo (ej CD Audio)
Nota:
• La mezcla de la
polaridad de los cables
del altavoz puede
reducir el efecto
estéreo y la calidad del
sonido.
Ajuste el modo surround del sistema principal a “SURROUND
ON” para la reproducción de DVD grabado en Dolby Digital,
Dolby Pro Logic, DTS, o sonido surround multicanal MPEG.
Cuando se ajusta a “SURROUND OFF”, el display de
Cable de altavoz
(15 m)
indicadores del canal de audio no variará. Sin embargo, el sonido
se reproducirá sin los efectos surround (ver página 21).
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Ingersoll Rand Heat Pump 650875 XXX C User Manual
Ingersoll Rand Impact Driver 114G User Manual
Ingersoll Rand Water Pump PD05P XXX XXX B User Manual
Init Indoor Furnishings 08 1421 User Manual
Insignia Clock Radio NS CLWL01 User Manual
JVC CRT Television AV 20D202 User Manual
Karcher Pressure Washer 300 User Manual
Kenmore Water System 62534857 User Manual
KitchenAid Refrigerator W10303987A User Manual
Kramer Electronics Switch VS 1616D User Manual