DVD DIGITAL CINEMA SYSTEM
TH-A35
Consists of XV-THA35 and SP-THA35
STANDBY/ON
AUDIO
SOUND
TV
VCR
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
0
TV
VCR
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
PTY
ENTER
COMPACT
D
S
I
G
I
T
A
L
D
P
I G
R O
I
T
L
A
O
L
G
•
E
C
X
SUPER VIDEO
I
U
R
R
O
U
N
D
PTY SEARCH
CHOICE
ON SCREEN
VOLUME
DOWN -TUNING
-
UP
SLOW
STANDBY
AUDIO SUBTITLE ANGLE ZOOM
PHONES
STANDBY/ON
RETURN DIMMER DSP
SLEEP
SURROUND
D
V
D
D
I
G
I
T
A
L
C
I
N
E
M
A
S
Y
S
T
E
M
T
H
-
A
3
5
RM-STHA35R
SOURCE
SURROUND
DSP
DVD CINEMA SYSTEM
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1009-003D
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE
CLASS
LASER
1
PRODUCT
2
WARNING LABEL, PLACED INSIDE THE UNIT
1. CLASS 1 LASER PRODUCT
2. CAUTION: Visible and invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage.
Locate the apparatus as follows:
Front:
Sides:
Top:
Back:
Bottom:
No obstructions open spacing.
No obstructions in 10 cm from the sides.
No obstructions in 10 cm from the top.
No obstructions in 15 cm from the back
No obstructions, place on the level surface.
In addition, maintain the best possible air circulation as illustrated.
Spacing 15 cm or more
XV-THA35
Wall or obstructions
Front
Stand height 15 cm or more
Floor
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be
taken if you are to obtain the best results and safety is to be assured.
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing
connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
Do be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way—switch off, withdraw
the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has
a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch
television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved
stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case —this could result in a fatal
electrical shock.;
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Repeating Playback .................................................................. 27
7 Repeat Play ........................................................................... 27
7 A–B Repeat........................................................................... 27
Playing Back Chapters in Random Order—Shuffle Play ........ 28
Programming the Playing Order of the Chapters
—Program Play.................................................................. 29
DVD Special Effect Playback .................................................. 30
7 Still Picture/Frame-by-Frame Playback ............................... 30
7 Slow Motion Playback ......................................................... 31
7 Zoom .................................................................................... 31
Parts Identification...................................... 2
Center Unit ................................................................................. 2
Remote Control .......................................................................... 3
Getting Started........................................... 4
Before Installation ...................................................................... 4
Checking the Supplied Accessories ........................................... 4
Putting Batteries in the Remote Control .................................... 4
Connecting the FM and AM Antennas ....................................... 5
Speaker Layout Diagram............................................................ 6
Connecting the Speakers ............................................................ 7
Connecting Audio/Video Component ........................................ 8
VCD/CD Playback...................................... 32
Showing the On-Screen Menu ................................................. 32
Showing the Information on the TV Screen............................. 32
Disc Menu-Driven Playback (Only for VCD).......................... 33
Selecting Playback Channel ..................................................... 33
Moving to a Particular Portion Directly ................................... 33
Searching for a Particular Point ............................................... 34
Repeating Playback .................................................................. 34
7 Repeat Play ........................................................................... 34
7 A–B Repeat........................................................................... 35
Playing Back Tracks in Random Order—Shuffle Play ............ 35
Programming the Playing Order of the Tracks
Basic DVD Operations................................ 10
1 Turn On the Power ............................................................... 10
2 Select the Source.................................................................. 10
3 Load a DVD ......................................................................... 10
4 Start Playback ...................................................................... 10
5 Adjust the Volume................................................................ 10
6 Activate Surround or DSP Mode ......................................... 11
7 Stop Playback ...................................................................... 11
Basic VCD/CD Operations .......................... 12
1 Turn On the Power ............................................................... 12
2 Select the Source.................................................................. 12
3 Load a VCD/CD .................................................................. 12
4 Start Playback ...................................................................... 12
5 Adjust the Volume................................................................ 12
6 Activate Surround or DSP Mode ......................................... 13
7 Stop Playback ...................................................................... 13
—Program Play.................................................................. 36
VCD Special Effect Playback .................................................. 37
7 Still Picture/Frame-by-Frame Playback ............................... 37
7 Slow Motion Playback ......................................................... 37
7 Zoom .................................................................................... 37
MP3 Playback........................................... 38
Starting Playback ..................................................................... 39
Operations Using the On-Screen Display ................................ 40
Moving to a Particular Track Directly...................................... 40
Programming the Playing Order of the Tracks
Basic Tuner Operations .............................. 14
1 Turn On the Power ............................................................... 14
2 Select the Band .................................................................... 14
3 Adjust the Volume................................................................ 14
4 Tune into a Station ............................................................... 14
5 Activate Surround or DSP Mode ......................................... 15
—Program Play.................................................................. 40
JPEG Playback .......................................... 42
Loading the Disc ...................................................................... 42
Operations Using the On-Screen Display ................................ 43
Moving to a Particular File Directly ........................................ 44
Programming the Playing Order of the Files
Other Basic Operations .............................. 16
Enjoying Sounds from the External Component ..................... 16
Listening with the Headphones ................................................ 17
Adjusting the Brightness .......................................................... 17
Turning Off the Power with the Timer ..................................... 18
Adjusting the Pictures .............................................................. 18
—Program Play.................................................................. 44
Tuner Operations....................................... 46
Tuning in Stations .................................................................... 46
Using Preset Tuning ................................................................. 47
Selecting the FM Reception Mode ........................................... 47
Using the RDS (Radio Data System)
Creating Realistic Sound Fields ................... 19
7 Dolby Surround .................................................................... 19
7 Dolby Digital ........................................................................ 19
7 DTS Digital Surround .......................................................... 19
7 DSP (Digital Signal Processor) Modes ................................ 20
Activating the Surround Mode ................................................. 20
Adjusting the Sound ................................................................. 21
to Receive FM Stations ...................................................... 48
Searching for a Program by PTY Codes .................................. 49
Switching to a Selected Program ............................................. 50
7 Description of the PTY codes .............................................. 51
Disc Introduction—DVD/VCD/CD ................ 22
Basic Disc Operations ................................ 23
Setting up the DVD Preferences ................. 52
Using the Choice Menus .......................................................... 52
Language Menu ........................................................................ 53
Picture Menu ............................................................................ 54
Audio Menu ............................................................................. 55
Setting Menu ............................................................................ 55
Setting the Parental (Rating) Level .......................................... 57
DVD Playback ........................................... 24
Showing the On-Screen Menu ................................................. 24
Showing the Information on the TV Screen............................. 24
Selecting the Subtitles .............................................................. 25
Selecting the Audio Languages ................................................ 25
Selecting the Multi-Angle Views ............................................. 25
Disc Menu-Driven Playback .................................................... 26
Moving to a Particular Portion Directly ................................... 26
Searching for a Particular Point ............................................... 27
Operating JVC’s Components...................... 58
Operating Other Manufacturers’ TV ............ 59
Maintenance ............................................. 60
Troubleshooting......................................... 61
Specifications............................................ 62
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Center Unit
Front Panel
1
2
3
4
5
6
7
VOLUME
STANDBY
PHONES
STANDBY/ON
D
V
D
D
I
G
I
T
A
L
C
I
N
E
M
A
S
Y
S
T
E
M
T
H
-
A
3
5
SOURCE
SURROUND
DSP
8
9
p
q
w
See pages in the parentheses for details.
Front Panel
1 STANDBY/ON
2 Disc tray (10, 12)
3 Illumination lamp
4 Display window
5 VOLUME control (10, 12, 14)
6 Remote sensor
button and STANDBY lamp (10 – 15)
9 3/8, 7, 4, and ¢ buttons
• Pressing 3/ also turns on the power and changes the
8
source to the DVD player.
p SOURCE button (10, 12, 14, 16, 46)
q SURROUND button (11, 13, 15, 17, 20)
w DSP button (11, 13, 15, 17, 20)
7 PHONES jack (17)
8 0 (open/close) button (10 – 13, 23, 39)
• Pressing this button also turns on the power and
changes the source to the DVD player.
Display Window
1
2
3
4
5
6
7
8
9
p
q
w
3
8
3
L
R
TITLE TRK TUNED CHP PROG
RDS
REPEAT 1 A–B
C
DIGITAL
k
Hz
ProLogic II
CD
S
LS
RS
STEREO VCD MP3
MHz
e
r
t
See pages in the parentheses for details.
Display Window
1 Audio channel indicators
• Indicates audio channels currently source signal.
2 Sound signal indicators (19, 20)
7 TUNED indicator (14, 46)
8 CHP (chapter) indicator (23)
9 PROG (program) indicator (29, 36)
p RDS indicator (48)
q Repeat mode indicators (27, 28, 34, 35)
• REPEAT, 1, and A–B
w Sleep indicator (18)
e STEREO indicator (47)
r Main display
t Frequency unit indicators
•
DIGITAL,
PRO LOGIC II, and DTS
3 Disc indicators (23)
• DVD, CD, VCD, and MP3
4 Playback indicators
• 3 (play) and 8 (pause)
5 TITLE indicator (23)
6 TRK (track) indicator (23)
• MHz (for FM station) and kHz (for AM station)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
See pages in the parentheses for details.
Remote Control
1 STANDBY/ON buttons
•TV
•VCR
•AUDIO
button (10, 12, 58, 59)
button (58)
button (10–15)
2 SOUND button (21)
3 • Number buttons (23, 26, 28, 33, 36, 40, 41, 44, 45, 47, 57–59)
• CLEAR button (26, 30, 33, 37, 54)
• Sound setting buttons (21)
CENTER + and – buttons
SUBWOOFER + and – buttons
REAR-L + and – buttons
REAR-R + and – buttons
1
2
STANDBY/ON
AUDIO
SOUND
TV
VCR
TEST button
CENTER
SUBWOOFER
1
2
3
4
SETTING button
4 Source selecting buttons (10, 12, 14, 16, 21, 46, 47)
• DVD, FM/AM, AUX
• Pressing one of these buttons also turns on the power.
5 CONTROL buttons
• TV CONTROL button (58, 59)
• VCR CONTROL button (58)
6 TV VOL + and – buttons (58, 59)
7 AUDIO VOL + and – buttons (10, 12, 14, 16)
8 TOP MENU button (26)
9 Menu operation buttons
REAR-L
REAR-R
5
TEST
9
6
7
8
3
CLEAR SETTING FM MODE
0
u
i
o
4
5
6
TV
VCR
;
a
AUDIOVOL
s
d
f
7
TOP
• cursor 3, 2, 5, and ∞ buttons
NEWS/INFO button
PTY 9 and ( buttons
PTY SEARCH button
• ENTER button
MENU
MENU
PTY
NEWS/INFO
8
9
PTY
ENTER
p
q
p CHOICE button (18, 52–57)
PTY SEARCH
CHOICE
ON SCREEN
q 7, 3, and
8
buttons
w 4 and ¢ buttons (23, 33, 39, 41, 43, 45, 58)
TUNING UP and DOWN buttons (14, 46)
e AUDIO button (25)
r SUB TITLE button (25)
t RETURN button (33)
y DIMMER button (17)
SLEEP button (18)
u FM MODE button (47)
DOWN -TUNING - UP
SLOW
w
e
r
g
h
AUDIO SUBTITLE ANGLE ZOOM
j
k
l
RETURN DIMMER DSP
SLEEP
SURROUND
t
y
i RDS button (48)
o SEARCH button (26, 33)
RM-STHA35R
DVD CINEMA SYSTEM
; TV/VIDEO button (58, 59)
a REC/MEMORY button (47, 58)
s MUTING button (11, 13, 14, 16)
d MENU button (26, 33)
f ON SCREEN button (24, 27–30, 32, 34–37)
g 1 and ¡ buttons (27, 31, 34, 37, 47, 58, 59)
SLOW + and – buttons (31, 37)
h ZOOM button (31, 37, 43, 45)
j ANGLE button (25)
k SURROUND button (11, 13, 15, 17, 20)
l DSP button (11, 13, 15, 17, 20)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Before Installation
General Precautions
• DO NOT insert any metal object into the center unit.
• DO NOT disassemble the center unit or remove screws, covers, or
cabinet.
Putting Batteries in the Remote Control
Before using the remote control, put two supplied batteries first.
• When using the remote control, aim the remote control directly at
the remote sensor on the center unit.
1. On the back of the remote control, remove the
battery cover.
• DO NOT expose the center unit to rain or moisture.
Locations
• Install the center unit in a location that is level and protected from
moisture.
• The temperature around the center unit must be between 5˚C and
35˚C (41˚F and 95˚F).
• Make sure there is good ventilation around the center unit. Poor
ventilation could cause overheating and damage the center unit.
Handling the center unit
2. Insert batteries. Make sure to match the polarity:
(+) to (+) and (–) to (–).
• DO NOT touch the power cord with wet hands.
• DO NOT pull on the power cord to unplug the cord. When
unplugging the cord, always grasp the plug so as not to damage
the cord.
• Keep the power cord away from the connecting cords and the
antennas. The power cord may cause noise or screen interference.
It is recommended to use a coaxial cable for antenna connection,
since it is well-shielded against interference.
• When a power failure occurs, or when you unplug the power cord,
the preset settings such as preset FM/AM channels and sound
adjustments may be erased in a few days.
3. Replace the cover.
Checking the Supplied Accessories
Check to be sure you have all of the following supplied accessories.
The number in the parentheses indicates the quantity of the pieces
supplied.
• Remote Control (1)
• Batteries (2)
• AM Loop Antenna (1)
• FM Antenna (1)
• Video cord (1)
If the range or effectiveness of the remote control decreases, replace
the batteries. Use two R6P (SUM-3)/AA(15F) type dry-cell
batteries.
• Speaker cords
6 m (4)*: For left front speaker, right front speaker, center
speaker, and subwoofer
CAUTION:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity: (+)
to (+) and (–) to (–).
10 m (2)*: For left rear speaker and right rear speaker
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
* The lengths of the speaker cords above are approximate.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
If anything is missing, contact your dealer immediately.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM and AM Antennas
If AM reception is poor, connect single vinyl-covered
wire (not supplied).
1
2
3
AM Loop Antenna
(supplied)
If FM reception is poor, connect
outdoor FM antenna (not supplied).
A
N
T
E
N
N
A
AM
EXT
COAXIAL
FM 75
AM LOOP
FM Antenna (supplied)
Snap the tabs on the loop into
the slots of the base to
assemble the AM loop antenna.
CENTER
SUBWOOFER SPEAKER
REAR
FRONT
SPEAKERS
A
N
T
E
N
N
A
SPEAKERS
ANALOG
IN
VIDEO OUT
VIDEO
RIGHT
LEFT
RIGHT LEFT
AM
EXT
AC IN
COAXIAL
FM 75
AM LOOP
L
R
S-VIDEO
AV
AUX
OPTICAL
DIGITAL IN
Center unit
FM antenna connection
AM antenna connection
Connect the supplied FM antenna to the COAXIAL FM 75 Ω
terminal as temporary measure.
Connect the supplied AM loop antenna to the AM LOOP terminals.
Connect the white cord to the AM EXT terminal, and the black cord
Extend the supplied FM antenna horizontally.
to
terminal.
• If reception is poor, connect an outdoor antenna (IEC or
DIN45325.) Before attaching a 75 Ω coaxial cable (with a
standard type connector), disconnect the supplied FM antenna.
Turn the loop until you have the best reception.
• If reception is poor, connect an outdoor single vinyl-covered wire
to the AM EXT terminal. (Keep the AM loop antenna connected.)
Note:
If the AM loop antenna wire is covered with vinyl, remove
the vinyl by twisting it as shown in the diagram.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Speaker Layout Diagram
Right front
speaker
Left front
speaker
Center speaker
Subwoofer
Center unit
COMPACT
D
S
I
G
I
T
A
L
D
P
I
R
G
I
T
L
A
O
L
G
•
E
C
X
SUPER VIDEO
U
R
R
O
U
N
D
O
I
VOLUME
STANDBY
PHONES
STANDBY/ON
D
V
D
D
I
G
I
T
A
L
C
I
N
E
M
A
S
Y
S
T
E
M
T
N
-
A
3
5
SOURCE
SURROUND
DSP
Left rear
speaker
Right rear
speaker
CENTER
SUBWOOFER SPEAKER
REAR
SPEAKERS
FRONT
SPEAKERS
AC IN
RIGHT
LEFT
RIGHT
LEFT
CATION
SPEAKER IMPANCE 6HMS
To subwoofer
To left front speaker
To right front speaker
To left rear speaker
To center speaker
To right rear speaker
6
Download from Www.Somanuals.com. All Manuals Search And Download.
When setting the speakers
Connecting the Speakers
To obtain the best possible sound from this system, you need to
place all the speakers except the subwoofer at the same distance
from the listening position with each front faced toward the listener.
Since bass sound is less-directional, but normally place it in
between right and left front speaker shown as below.
Connect the satellite speakers and subwoofer to the terminals on the
rear panel using speaker cords supplied.
Color labels are attached to the speaker cords to indicate the speaker
and the terminal to which each is to be connected.
• The five satellite speakers can be used for any positions—center,
front left and right, and rear left and right.
Subwoofer
Center speaker
• Connect the color labeled cord to the color (+) terminal, and the
other cord to the black (–) terminal respectively.
Right front
Left front
speaker
speaker
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
Connecting speaker cords to the terminals
1
2
3
Left rear
speaker
Right rear
speaker
If your speakers cannot be placed at the same distance from the
listening position
You can adjust the delay time of the center speaker and rear
speakers. For in-depth information about adjusting the delay time,
see “Setting Menu” on pages 55 and 56.
1 Open the terminal clamp.
2 Insert the speaker cord.
3 Close the clamp.
Note:
Subwoofer phase is closely related with the distance from the
listening position to the front speakers and subwoofer.You can change
the phase to obtain better bass sound by connecting the speaker
cords to the terminals of the subwoofer inversely—the color labeled
cord to the black terminal, and the black cord to the color terminal.
Notes:
CAUTION:
• If the speaker cord is covered with vinyl, remove the
vinyl by twisting it as shown in the diagram.
• Make sure the core wire of speaker cords do not
expose to out of the terminals. This could cause
short-circuit.
• When attaching the satellite speakers on the wall, have them
attached to the wall by a qualified person.
DO NOT attach the satellite speakers on the wall by yourself to
avoid an unexpected damage of their falling from the wall, caused
by incorrect attachment or weakness in the wall.
• Care is required in selecting a location for attaching speakers to the
wall. Injury to personnel, or damage to equipment, may result if the
speakers are attached in a location which interferes with daily
activities.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting Audio/Video Component
Turn the power off to all components before connections.
Audio Component connection
Connect the other component to the center unit with the
audio cord.
Use the cords supplied with the other component or
purchase them at an electric appliance store.
Illustrations of the input/output terminals below are typical
examples.
When you connect the other component, refer also to its
manuals since the terminal name actually printed on the rear
vary among the components.
Optical digital cord (not supplied)
A
If you connect a sound-enhancing device such as a graphic
equalizer between the source component and the center
unit, the sound output through this system may be
distorted.
Audio cord (not supplied)
B
DBS Tuner
Before connecting an
optical digital cord, unplug
OPTICAL
DIGITAL IN
the protective plug.
DIGITAL
OPTICAL OUT
MD Recorder
A
DBS Tuner
Center unit
A
N
T
E
N
N
A
ANALOG
IN
VIDEO OUT
VIDEO
AM
EXT
COAXIAL
FM 75
AM LOOP
L
MD Recorder
R
S-VIDEO
AV
AUX
OPTICAL
DIGITAL IN
Cassette Deck
AUDIO
LEFT
ANALOG
IN
L
RIGHT
VCR
R
OUT
B
TV
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV connection
The S-video cord and the SCART cable are not supplied with this system.
Use the cords or cables supplied with the other component or purchase them at an electric appliance store.
Video cord (supplied)
SCART cable (not supplied)
A
B
C
S-video cord (not supplied)
• S-video (Y/C-separation) signal does not output from the AV
(SCART) connector.
A
B
C
You can select one of three connection types—
,
, and
.
If you want to use S-video (Y/C-separation) signal, connect the
For using the composite video cord or S-video cord
• If your TV has S-video (Y/C-separation) jack, connect it using an
TV using an S-video cord (not supplied)
• If you use the SCART cable to connect the TV, you can enjoy
the sound with TV speakers.
.
B
S-video cord (not supplied) B .
By using this jack, you can get a better picture quality than using
When you play back a DVD and select the speaker settings to
2.1 ch (see page 21), the front left and right, center, and rear
channel signals are down-mixed and then output from the AV
(SCART) connector.
A
composite video cord connection
.
• When you use the S-video cord to connect the TV, you select
the video signal type correctly. See “Picture Menu” on page 54.
Otherwise, the front left, right channel signals are output from the
AV (SCART) connector.
For using the SCART cable (
If you use the SCART cable to connect the TV, you select the video
signal type correctly. See “Picture Menu” on page 54.
)
C
A
B
VIDEO OUT
VIDEO
S-VIDEO
TV
CENTER
SUBWOOFER SPEAKER
REAR
FRONT
A
N
T
SPEAKERS
SPEAKERS
ANALOG
IN
VIDEO OUT
VIDEO
RIGHT
LEFT
RIGHT
LEFT
E
N
AM
EXT
AC IN
COAXIAL
N
AM LOOP
L
A
FM 75
R
S-VIDEO
AV
AUX
OPTICAL
DIGITAL IN
AV
C
Now, you can plug the power cord of the center unit into the AC outlet.
Notes:
• Keep the power cord away from the connecting cords and the antenna cords. The power cord may cause noise or screen interference.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic DVD Operations
This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
2
Select the Source
DVD
Press DVD.
The source changes to DVD.
3
Load a DVD
STANDBY/ON
On the front panel ONLY:
SOUND
AUDIO
TV
VCR
Press 0 to open the disc tray, then place a DVD
correctly with its label side up.
1AUDIO
TV
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
0
DVD
FM/AM
AUX
RDS
2DVD
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV/VIDEO
CORRECT
INCORRECT
VCR
TVVOL
MUTING
5AUDIO VOL
AUDIOVOL
• DO NOT use the disc stabilizer.
+/–
TOP
MENU
MENU
PTY
NEWS/INFO
4
Start Playback
PTY
ENTER
Press 3.
The disc tray closes. “READING” appears for a
while.
• You can also start playback by closing the disc
tray using 0 on the front panel.
PTY SEARCH
CHOICE
ON SCREEN
77
43
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
RETURN DIMMER DSP
SLEEP
SURROUND
6DSP
6
SURROUND
5
Adjust the Volume
RM-STHA35R
From the remote control :
DVD CINEMA SYSTEM
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
AUDIOVOL
press and hold AUDIO VOL –.
For in-depth information about DVD operations, see
pages 22 to 31.
On the front panel :
VOLUME
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.
1
Turn On the Power
Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
• When you use a JVC’s TV, you can turn on your TV by pressing
TV
on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 59.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see “ Language Menu” on
pages 53.
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62, and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more than
level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
Press AUDIO
panel).
The STANDBY lamp goes off and the illumination lamp
on the center unit lights up. The source indication
selected previously appears on the display.
(or
STANDBY/ON on the front
AUDIO
10
Download from Www.Somanuals.com. All Manuals Search And Download.
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
MUTING
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 55 and 56.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or – also restores the sound.
6Activate Surround or DSP Mode
You can enjoy three kinds of surround—Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
7
Stop Playback
Press 7 twice.
Playback stops completely.
Digital Multichannel Surround—Dolby Digital
and DTS Digital Surround
Dolby Digital or DTS Digital Surround takes effect only when you
enjoy a disc encoded with its signals.
• This system can memorize the end point even when
you press 7 once. When you start playback again by
pressing 3, playback begins from where it has been stopped—
Resume play.
To remove the loaded disc
Press 0.
“OPEN” appears on the display and the disc tray comes
out.
To activate Dolby Digital or DTS Digital Surround
When a disc encoded with the Dolby Digital or DTS Digital
Surround is loaded, the system detects it and starts playing the disc
automatically with Multichannel Surround activated.
– For in-depth information about surround modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
To close the disc tray, press 0 again.
Dolby Pro Logic II—Pro Logic II Music and Pro
Logic II Movie
To prohibit disc ejection
On the front panel ONLY:
Press and hold 6 and 4 for more
than 3 seconds.
To activate Pro Logic II modes
“LOCKED” appears on the display, and
the disc tray is locked.
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
SURROUND
To cancel the prohibition, press and hold
6 and 4 for more than 3 seconds.
• Each time you press the button, Pro Logic II mode
changes as follows:
“UNLOCK” appears on the display, and the disc tray is unlocked.
PL II MUSIC
PL II MOVIE
PL II OFF
To turn off the power (into standby)
• When Dolby Pro Logic II mode is activated, the
PRO LOGIC
Press AUDIO
panel).
(or
STANDBY/ON on the front
II indicator lights up on the display.
AUDIO
The illumination lamp goes off and the STANDBY lamp
lights up.
– For in-depth information about Dolby Pro Logic II modes, see
“Creating Realistic Sound Fields” on pages 19 to 21.
• If you press AUDIO
(or
STANDBY/ON on the front
panel) while the disc tray is kept open, the disc tray closes
automatically, then the system is turned off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
DSP modes—CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
To activate DSP modes
Press DSP.
DSP
The current DSP mode appears on the display for a
while.
• Each time you press the button, DSP mode changes as
follows:
LIVE HOUSE
HALL
CONCERT
STADIUM
DSP OFF THEATER
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic VCD/CD Operations
2
Select the Source
STANDBY/ON
AUDIO
SOUND
Press DVD.
DVD
TV
VCR
1AUDIO
TV
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
3
Load a VCD/CD
CLEAR SETTING FM MODE
0
On the front panel ONLY:
DVD
FM/AM
AUX
RDS
2DVD
Press 0 to open the disc tray, then place a disc
correctly with its label side up.
TV/VIDEO
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
MUTING
5AUDIO VOL
AUDIOVOL
+/–
TOP
MENU
MENU
PTY
NEWS/INFO
PTY
ENTER
CORRECT
INCORRECT
PTY SEARCH
CHOICE
ON SCREEN
• When using a CD single (8 cm), place it on the inner circle of the
disc tray.
• Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the center unit.
77
43
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
• DO NOT use the disc stabilizer.
RETURN DIMMER DSP
SLEEP
SURROUND
6DSP
6
SURROUND
4
Start Playback
RM-STHA35R
DVD CINEMA SYSTEM
Press 3.
The disc tray closes. “READING” appears for a while.
• You can also start playback by closing the disc tray
using 0 on the front panel.
• SVCD can be operated by using the VCD operation
procedure.
• For in-depth information about VCD/CD operations,
see pages 22, 23, and 32 to 37.
5
Adjust the Volume
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
1
Turn On the Power
AUDIOVOL
Before turning on the system, turn on your TV if necessary and
select the correct video input. (See the manual supplied with your
TV.)
press and hold AUDIO VOL –.
On the front panel :
• When you use a JVC’s TV, you can turn on your TV by pressing
TV
on the remote control, and select the video input by
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
VOLUME
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 59.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see “ Language Menu” on
pages 53.
turn VOLUME control counterclockwise.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Press AUDIO
AUDIO
(or
STANDBY/ON on the front panel).
The STANDBY lamp goes off and the illumination lamp
on the center unit lights up. The source indication selected
previously appears on the display.
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62 and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more than
level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
7
Stop Playback
Press 7 twice.
MUTING
Playback stops completely.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or – also restores the sound.
• This system can memorize the end point even when
you press 7 once. When you start playback again by
pressing 3, playback begins from where it has been
stopped—Resume play.
6
Activate Surround or DSP Mode
To remove the loaded disc
Press 0.
“OPEN” appears on the display and the disc tray comes
out.
You can enjoy Dolby Pro Logic II mode and DSP modes.
Dolby Pro Logic II—Pro Logic II Movie and Pro
Logic II Music
To close the disc tray, press 0 again.
To activate Pro Logic II modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
To prohibit disc ejection
SURROUND
On the front panel ONLY:
Press and hold 6 and 4 for more than
3 seconds.
“LOCKED” appears on the display, and the
disc tray is locked.
PL II MUSIC
PL II MOVIE
To cancel the prohibition, press and hold
6 and 4 for more than 3 seconds.
“UNLOCK” appears on the display, and the
disc tray is unlocked.
PL II OFF
• When Dolby Pro Logic II mode is activated, the
II indicator lights up on the display.
PRO LOGIC
– For in-depth information about Dolby Pro Logic II modes, see
“Creating Realistic Sound Fields” on pages 19 to 21.
To turn off the power (into standby)
AUDIO
Press AUDIO
(or
STANDBY/ON on the front panel).
The illumination lamp goes off and the STANDBY lamp
lights up.
DSP modes—CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
• If you press AUDIO
(or
STANDBY/ON on the front
panel) while the disc tray is kept open, the disc tray closes
automatically, then the system is turned off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
To activate DSP modes
Press DSP.
The current DSP mode appears on the display for a
while.
DSP
• Each time you press the button, DSP mode changes
as follows:
LIVE HOUSE
HALL
CONCERT
DSP OFF THEATER
STADIUM
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 55 and 56.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Tuner Operations
On the front panel:
SOURCE
Press SOURCE repeatedly until the desired band
(TUNER FM or TUNER AM) appears on the
display.
The last received station of the selected band is tuned into.
• Each time you press the button, the source changes as follows:
STANDBY/ON
SOUND
AUDIO
TV
VCR
1AUDIO
CENTER
SUBWOOFER
TUNER FM
TV SOUND
DVD
TUNER AM
ANALOG IN
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
DIGITAL IN
CLEAR SETTING FM MODE
0
DVD
FM/AM
AUX
RDS
2FM/AM
TV/VIDEO SEARCH
MUTING REC/MEMORY
3
Adjust the Volume
CONTROL
TV
VCR
TVVOL
MUTING
From the remote control :
3AUDIO VOL
AUDIOVOL
AUDIO VOL
+ / –
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL –.
TOP
MENU
MENU
PTY
NEWS/INFO
PTY
ENTER
VOLUME
On the front panel :
PTY SEARCH
CHOICE
ON SCREEN
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.
4TUNING
DOWN -TUNING - UP
SLOW
DOWN/UP
AUDIO SUBTITLE ANGLE ZOOM
CAUTION:
5
SURROUND
RETURN DIMMER DSP SURROUND
SLEEP
5DSP
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
RM-STHA35R
DVD CINEMA SYSTEM
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62 and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more than
level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
For in-depth information about tuner operations, see
“Tuner Operations” on pages 46 to 51.
To turn off the sounds temporarily
From the remote control ONLY:
1
Turn On the Power
MUTING
Press MUTING.
Press AUDIO
panel).
(or
STANDBY/ON on the front
AUDIO
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or – also restores the sound.
The STANDBY lamp goes off and the illumination lamp
lights up on the center unit.
The source indication selected previously appears on the
display.
4
Tune into a Station
From the remote control:
2
Select the Band
DOWN -TUNING - UP
Press and hold TUNING UP or DOWN until
the station frequency starts changing
continuously on the display.
From the remote control:
Press FM/AM.
FM/AM
The last received station of the selected band is tuned
into.
• Each time you press the button, the band alternates
between FM and AM.
The system starts searching for a station.
When a station of sufficient signal strength is tuned in, the system
stops searching, and the TUNED indicator lights up on the display.
On the front panel:
Press and hold 4 or ¢ until the station frequency starts
changing continuously on the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
To turn off the power (into standby)
AUDIO
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you press the button repeatedly, the frequency changes step
by step.
Press AUDIO
panel) again.
(or
STANDBY/ON on the front
The illumination lamp goes off and the STANDBY lamp
lights up.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
5
Activate Surround or DSP Mode
You can enjoy Dolby Pro Logic II mode and DSP modes.
Dolby Pro Logic II—Pro Logic II Movie and Pro
Logic II Music
To activate Pro Logic II modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
SURROUND
• Each time you press the button, Pro Logic II mode
changes as follows:
PL II MUSIC
PL II MOVIE
PL II OFF
• When Dolby Pro Logic II mode is activated, the
II indicator lights up on the display.
PRO LOGIC
– For in-depth information about Dolby Pro Logic II modes, see
“Creating Realistic Sound Fields” on pages 19 to 21.
DSP modes—CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
To activate DSP modes
Press DSP.
DSP
The current DSP mode appears on the display for a
while.
• Each time you press the button, DSP mode changes as
follows:
LIVE HOUSE
HALL
CONCERT
DSP OFF THEATER
STADIUM
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 55 and 56.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Basic Operations
On the front panel:
STANDBY/ON
Press SOURCE repeatedly until “ANALOG
IN,”“TV SOUND,” or “DIGITAL IN” appears
on the display.
SOURCE
SOUND
AUDIO
TV
VCR
CENTER
SUBWOOFER
• Each time you press the button, the source
changes as follows:
1
2
3
4
REAR-L
REAR-R
5
6
7
8
TEST
CLEAR SETTING FM MODE
TUNER FM
TV SOUND
DVD
TUNER AM
ANALOG IN
9
0
DVD
FM/AM
AUX
RDS
AUX
DIGITAL IN
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
VCR
TVVOL
MUTING
2 Start playback on the external equipment.
• For in-depth information about the external equipment, see the
manual supplied for it
AUDIO VOL
+/–
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
3/2
ENTER
3 Adjust the Volume
From the remote control :
AUDIOVOL
PTY
ENTER
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
PTY SEARCH
CHOICE
ON SCREEN
press and hold AUDIO VOL –.
DOWN -TUNING - UP
SLOW
VOLUME
On the front panel :
AUDIO SUBTITLE ANGLE ZOOM
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
RETURN DIMMER DSP
SLEEP
SURROUND
DIMMER
SURROUND
DSP
turn VOLUME control counterclockwise.
RM-STHA35R
DVD CINEMA SYSTEM
CAUTION:
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
Enjoying Sounds from the External
Component
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
You can enjoy sounds from the external equipment connected to the
OPTICAL DIGITAL IN terminal or ANALOG IN jacks on the rear
panel of the center unit, or TV connected with SCART cable.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62 and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more
than level “25,” the volume level will be automatically set at level
“25” next time you turn on the unit.
1Select AUX as the source.
From the remote control:
To turn off the sounds temporarily
AUX
Press AUX.
From the remote control ONLY:
• Each time you press the button, the source
changes as follows:
Press MUTING.
MUTING
ANALOG IN
TV SOUND
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or – also restores the
sound.
DIGITAL IN
DIGITAL IN : Select this to enjoy the external equipment
connected to the OPTICAL DIGITAL IN
terminal.
TV SOUND : Select this to enjoy the TV sound connected
with SCART cable.
ANALOG IN : Select this to enjoy the external equipment
connected to the ANALOG IN jacks.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Activate Surround or DSP Mode
You can enjoy three kinds of surround—Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
Listening with the Headphones
You can enjoy the sound with headphones.
Connect a pair of headphones to the PHONES jack on the front
panel. The speakers are diactivated and you can listen the sound
with the headphones.
• Disconnecting a pair of headphones from the PHONES jack
activate speakers.
Digital Multichannel Surround—Dolby Digital
and DTS Digital Surround
You can enjoy Dolby Digital or DTS Digital Surround when you
playback Multichannel source on the external equipment.
CAUTION:
Be sure to turn down the volume:
• Before connecting or putting on headphones, as high volume can
damage both the headphones and hearing.
• Before removing headphones, as high volume may output from the
speakers.
To activate Dolby Digital or DTS Digital Surround
When playback source is encoded with Dolby Digital or DTS
Digital Surround, the system detects it and activate Multichannel
Surround automatically.
– For in-depth information about surround modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
Adjusting the Brightness
You can dim the indications on the display window and the
illumination lamps on the center unit.
Dolby Pro Logic II—Pro Logic II Music and Pro
Logic II Movie
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
To activate Pro Logic II modes
Press SURROUND.
The current Pro Logic II mode appears on the
display for a while.
• Each time you press the button, Pro Logic II
mode changes as follows:
SURROUND
From the remote control ONLY:
DIMMER
1 Press DIMMER repeatedly until
SLEEP
“DIMMER (with the current setting) ”
appears on the display.
• Each time you press the button, the indication in the main
display changes as follows:
PL II MUSIC
PL II MOVIE
PL II OFF
*
**
DIMMER
SLEEP
• When Dolby Pro Logic II mode is activated, the
II indicator lights up on the display.
PRO LOGIC
* With the current level is shown.
** With the remaining time is shown.
– For in-depth information about Dolby Pro Logic II modes, see
“Creating Realistic Sound Fields” on pages 19 to 21.
2 Press cursor 3/2 to adjust the
brightness level.
ENTER
DSP modes—CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
• The brightness level changes as
follows:
To activate DSP modes
Press DSP.
The current DSP mode appears on the display for a
while.
• Each time you press the button, DSP mode changes
as follows:
DIMMER MIN (Minimum)
DIMMER MID (Middle)
DSP
LIVE HOUSE
HALL
CONCERT
DIMMER MAX (Maximum)
DSP OFF THEATER
STADIUM
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
3 Press ENTER.
“OK” appears on the display and the
brightness level changes.
ENTER
Notes:
• On some source signals, no sounds come out from the subwoofer.
• Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 55 and 56.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Basic Operations
To check or change the time remaining until the
TVVOL
MUTING REC/MEMORY
shut-off time
DIMMER
AUDIOVOL
Press SLEEP repeatedly until “SLEEP (with the
remaining time) ” appears on the display.
• You can change the shut-off time by pressing cursor 3/2 then
ENTER .
SLEEP
TOP
MENU
MENU
PTY
NEWS/INFO
ENTER
3/2/5/∞
ENTER
PTY
CHOICE
SLEEP
PTY SEARCH
To cancel the Sleep Timer
Press cursor 3/2 repeatedly until “SLEEP OFF” appears on
the display in procedure above, then ENTER.
CHOICE
ON SCREEN
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
• Turning off the power also cancels the Sleep Timer.
RETURN DIMMER DSP
SLEEP
SURROUND
Adjusting the Pictures
RM-STHA35R
DVD CINEMA SYSTEM
You can adjust parameters that affect the appearance of picture.
From the remote control ONLY:
1 Press CHOICE while playing back a
disc.
Turning Off the Power with the Timer
CHOICE
Video Enhance menu appears on TV-screen.
Video Enhance
Brightness
Edges
You can fall asleep while listening to music—Sleep Timer.
There is a time limit in doing the following steps. If the setting is
Color
Contrast
canceled before you finish, start from step 1 again.
From the remote control ONLY:
2 Press cursor 5/∞ repeatedly to
1 Press SLEEP repeatedly until “SLEEP
DIMMER
select a parameter you want to
(with the remaining time) ” appears on
SLEEP
ENTER
adjust.
the display.
• Adjust gradually to show preferable
appearance by confirming the picture.
• Each time you press the button, the indication in the main
display changes as follows:
*
**
DIMMER
SLEEP
Brightness: Controls the brightness of the screen.
Edges:
Color:
Controls the sharpness of the screen.
Controls the color of the screen.
* With the current level is shown.
** With the remaining time is shown.
Contrast: Controls the contrast of the screen.
2 Press cursor 3/2 to select the
shut-off time.
3 Press cursor 3/2 repeatedly to
• The shut-off time changes as follows:
ENTER
change the setting.
ENTER
10
20
30
60
90
150
120
SLEEP OF
(Canceled)
F
4 Press CHOICE.
Video Enhance menu disappears.
CHOICE
3 Press ENTER.
“OK” appears on the display and the
sleep indicator lights up.
Note:
ENTER
If you turn off the unit, the video enhance setting return to initial
setting.
When the shut-off time comes, the
system turns off automatically.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
You can use the following surround to reproduce a realistic sound
field.
I DTS Digital Surround**
Used to reproduce multichannel sound tracks of the software
encoded with DTS Digital Surround ( ).
• Dolby Surround
• Dolby Pro Logic II
• Dolby Digital
• DTS Digital Surround
• DSP modes
DTS Digital Surround is another discrete 5.1 channel digital audio
format available on CD, LD, and DVD software.
Compared to Dolby Digital, audio compression rate is relatively low.
This fact allows DTS Digital Surround format to add breadth and
depth to the reproduced sounds. As a result, DTS Digital Surround
features natural, solid and clear sound.
7 Dolby Surround
Dolby Pro Logic II*
When the system detects DTS Digital Surround signals, the
indicator lights up on the display.
Dolby Pro Logic II has newly developed multichannel playback
format to decode the 2 channel sources—stereo analog source,
Linear PCM digital source, and Dolby Surround encoded source—
into 5.1 channel.
Matrix-based encoding/decoding method for Dolby Pro Logic II
makes no limitation for the cutoff frequency of the rear treble and
enables stereo rear sound compared to conventional Dolby Pro
Logic.
Exapmle:
Indications on the display for each surround
• Dolby Digital
Dolby Pro Logic II enables to reproduce spacious sound from
original sound without adding any new sounds and tonal colorations.
Dolby Pro Logic II has two modes—Movie mode and Music mode:
Pro Logic II Movie (PL II MOVIE)—suitable for reproduction of
DOLBY SURROUND
8
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
C
3
DIGITAL
AUDIO
CD
MHz
Hz
ProLogic II
STEREO VCD MP3
S
LS
RS
k
Dolby Surround encoded sources bearing the mark
.
• DTS Digital Surround
You can enjoy sound field very close to the one created with discrete
5.1 channel sounds.
Pro Logic II Music (PL II MUSIC)—suitable for reproduction of
any 2 channel stereo music sources. You can enjoy wide and deep
sound by using this mode.
8
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
C
3
AUDIO
CD
MHz
Hz
ProLogic II
STEREO VCD MP3
S
LS
RS
k
• Dolby Pro Logic II Music
• When Dolby Pro Logic II is activated, the
indicator lights up on the display window.
PRO LOGIC II
8
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
3
DIGITAL
ProLogic II
STEREO VCD MP3
AUDIO
CD
MHz
Hz
k
7 Dolby Digital*
Used to reproduce multichannel soundtracks of the software
encoded with Dolby Digital ( ).
• Dolby Pro Logic II Movie
8
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
3
DIGITAL
ProLogic II
AUDIO
CD
Dolby Digital 5.1 ch (DOLBY D) encoding method (so-called
discrete multichannel digital audio format) records and digitally
compresses the left front channel, right front channel, center
channel, left rear channel, right rear channel, and LFE channel
signals.
Since each channel is completely independent from the other
channel signals to avoid interference, you can obtain much better
sound quality with much stereo and surround effects.
MHz
Hz
STEREO VCD MP3
k
• DSP
8
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
C
3
DIGITAL
ProLogic II
AUDIO
CD
MHz
Hz
STEREO VCD MP3
k
When the system detects Dolby Digital signals, the
indicator lights up on the display.
DIGITAL
Note:
Dolby Digital software can be roughly grouped into two categories—
multichannel (up to “5.1” channel) and 2 channel software. To enjoy
surround sounds while playing Dolby Digital 2 ch software, you can
use Dolby Pro Logic II.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992–1997 Dolby
Laboratories. All rights reserved.
**“DTS” and “DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
I DSP (Digital Signal Processor) Modes
DSP modes have been designed to create important acoustic
surround elements.
Activating the Surround Mode
You can enjoy three kinds of surround—Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
• If you activate the surround mode not available, “INVALID”
appears on the display.
The sound heard in a live house, a hall, a concert, a stadium, or a
theater consists of direct sound and indirect sound—early reflections
and reflections from behind. Direct sounds reach the listener directly
without any reflection. On the other hand, indirect sounds are
delayed by the distances of the ceiling and walls.
These indirect sounds are important elements of the acoustic
surround effects.
For Dolby Digital or DTS Digital Surround
When playback source is encoded with Dolby Digital or DTS
Digital Surround, the system detects it and activate Multichannel
Surround automatically.
The following DSP modes are provided with this unit.
LIVE HOUSE : Gives the feeling of a live music house with a
• When Dolby Digital is activated, the
up on the display.
DIGITAL indicator lights
low ceiling.
HALL
: Gives clear vocal and the feeling of a concert
hall.
• When DTS Digital Surround is activated, the
up on the display.
indicator lights
CONCERT
: Gives the feeling of a large hall designated
primarily for classical concert.
STADIUM
THEATER
: Gives feeling of an outdoor stadium.
: Gives the feeling of a theater.
For Pro Logic II modes
Press SURROUND.
SURROUND
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
These DSP modes can be used to add the acoustic surround effects
while reproducing stereo analog software, Linear PCM digital
software, or Dolby Surround encoded source and can give you a real
“being there” feeling.
PL II MUSIC
PL II MOVIE
Note:
On some source signals, DSP mode may not work sufficiently. In that
case, select another preferred DSP mode.
PL II OFF
• When Dolby Pro Logic II mode is activated, the
II indicator lights up on the display.
PRO LOGIC
For DSP modes
DSP
Press DSP.
The current DSP mode appears on the display for a
while.
• Each time you press the button, DSP mode changes as
follows:
LIVE HOUSE
HALL
CONCERT
STADIUM
DSP OFF THEATER
Available surround according to the input signal format
⅜: Possible
ן : Impossible PL II OFF and
DSP OFF
(canceled)
Pro Logic II
DSP
Multichannel
Surround
Surround
PLII Movie PLII Music LIVE HOUSE
HALL
CONCERT
STADIUM
THEATER
Analog
ן ן ⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
Linear PCM
Dolby Digital
Multichannel
⅜
ן ⅜
ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן —
⅜
—
Dolby 2ch
DTS Digital
Surround
DTS 2ch
MP3
ן ן ן ן ן ן ן ן ן ן ן ן ן ן ן ן ⅜
⅜
20
Download from Www.Somanuals.com. All Manuals Search And Download.
• The test tone comes out of the speakers in the following order:
Left front speaker
Subwoofer
Center speaker
Right front speaker
Right rear speaker
STANDBY/ON
AUDIO
SOUND
SOUND
TV
VCR
Sound
setting
buttons
CENTER
SUBWOOFER
1
2
3
4
Left rear speaker
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
TEST
SETTING
There is a time limit in doing the following steps. If the setting is
canceled before you finish, press SOUND and start from step 4
again.
0
DVD
FM/AM
AUX
RDS
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
CENTER
SUBWOOFER
4 Adjust the speaker output
1
2
3
4
AUDIOVOL
levels (–6 dB to +6 dB).
Adjust the center speaker, rear
speakers and subwoofer levels
comparing to the sound from the
front speakers.
REAR-L
REAR-R
TOP
5
6
7
8
MENU
MENU
PTY
NEWS/INFO
PTY
ENTER
• To adjust the center speaker level, press CENTER +/–.
• To adjust the left rear speaker level, press REAR-L +/–.
• To adjust the right rear speaker level, press REAR-R +/–.
• To adjust the subwoofer level, press SUBWOOFER +/–.
PTY SEARCH
CHOICE
ON SCREEN
7
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
5 Press STOP to stop the test tone.
RETURN DIMMER DSP
SLEEP
SURROUND
RM-STHA35R
DVD CINEMA SYSTEM
6 Press SOUND again.
SOUND
“SOUND OFF” appears on the display.
Adjusting the Sound
Notes:
• If a disc is not loaded, you cannot adjust the settings.
• You can adjust the speaker output levels without outputting the test
tone.
• If there is a speaker from which no sounds comes out, check the
speaker’s connection (see pages 6 and 7) and setting (see pages
55 and 56).
• If you press SETTING while adjusting sound, speaker settings
alternate between 5.1ch (use all sattelite speakers and subwoofer)
and 2.1ch (use only front speakers and subwoofer.)
• You can output the test tone in any surround mode, or even when
surround mode is not activated.
You can adjust the following settings.
It is recommended that you make adjustments from your actual
listening point.
– Output level for the center speaker
– Output level for the rear speakers
– Output level for the subwoofer
1 Load a disc, and Press STOP.
The source changes to DVD and playback stops.
• When an MP3 disc is loaded, you cannot adjust the subwoofer
output level.
2 Press SOUND.
SOUND
“SOUND” appears on the display and the 10 keys
are activated for sound adjustments.
TEST
3 Press TEST to check if you can hear the
9
sounds through all the speakers at the
equal level.
Test tone menu appears on the TV.
L
C
R
SW
LS
RS
To cancel press Stop
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Introduction—DVD/VCD/CD
This system has been designed to play back the following discs: DVD,
Video CD, Super Video CD (SVCD), Audio CD, CD-R, and CD-RW.
• This system can also play back MP3 and JPEG files recorded on
CD-Rs and CD-RWs. For in-depth information about MP3, see
“MP3 Playback” on page 38, and about JPEG, see “JPEG
Playback” on page 42.
IMPORTANT: Before performing any operations, make sure of
the following....
• Check the connection with the TV.
• Turn on the TV and select the correct input on the TV to view the
pictures or on-screen indications on the TV screen.
• For DVD playback, you can change the Setup menu setting to
your preference. (See pages 52 to 57.)
Discs you can play:
If “
” appears on the TV screen when pressing a button,
Disc
Type
Mark
(Logo)
Video
Format
Region Code
Number*
the disc cannot accept an operation you have tried to do, or
information required for that operation is not recorded in the disc.
NOTICE : In some cases, without showing “ ,” operations will
not be accepted.
DVD
Video
2
ALL
Disc structure—DVD,Video CD (VCD/SVCD) andAudio CD (CD)
A DVD disc consists of Titles, and each title may be divided into
some Chapters. (See Example 1.)
For example, if a DVD disc contains some movies, each movie may
have its own title number, and it may be further divided into some
chapters.
On the other hand, a VCD/SVCD or CD consists of Tracks. (See
Example 2.)
In general, each song has its own track number. (On some discs,
each track may also be divided by Indexes.)
Video
CD
NTSC
PAL
Super
Video
CD
COMPACT
When playing back a VCD/SVCD with Playback Control (PBC)
function, you can select what to view using the menu shown on the
TV screen. (While operating a Video CD using the menu, some of
the functions such as Repeat and Track Search may not work.)
Audio
CD
DIGITAL AUDIO
CD-R
Example 1: DVD disc
CD-RW
• On some DVD or VCD/SVCD discs, their actual operations
may be different from what is explained in this manual. This is
due to the disc programming and disc structure, but not a
malfunction of this system.
• DVD-R discs recorded with the DVD VIDEO format can be
played back. However, some discs may not be played back
because of the disc characteristics or recording conditions.
Note that unfinalized disc cannot be played back.
• The following discs cannot be played back:
Example 2 : Video CD/Audio CD
– DVD-Audio, DVD-ROM, DVD-RAM, DVD-RW,
DVD+RW, CD-ROM, CD-I, (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the
speakers.
* Note on Region Code
Notes on CD-R and CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be
played back only if they are already “finalized.”
• The system can play back CD-Rs or CD-RWs recorded on a
personal computer if they have been recorded in the audio CD
format or recorded in MP3 format (see page 38).
DVD players and DVD Video discs have their own Region Code
numbers. This system only can play back DVD discs whose Region
Code numbers include “2.”
Examples:
However, they may not be played back depending on their
characteristics or recording conditions.
• Before playing back CD-Rs or CD-RWs, read their instructions or
cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them.
• CD-RWs may require a longer readout time. This is caused by the
fact that the reflectance of CD-RWs is lower than for regular CDs.
If a DVD with the inadequate Region Code numbers is loaded,
“Invalid Region” appears on the TV and playback cannot start.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Disc Operations
Note:
If “Password – – – –” and “Parental Locked” appear on the TV screen,
Parental Lock is in use.You cannot play back a DVD containing violent
scenes or those not suitable for your family members.
STANDBY/ON
SOUND
AUDIO
TV
VCR
To play back such a disc, cancel the Parental Lock. (See page 57.)
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
To stop playback for a moment
Press 8.
CLEAR SETTING FM MODE
0
DVD
FM/AM
AUX
RDS
• To resume play, press 3.
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
To go to another chapter or track
AUDIOVOL
Press ¢ or 4 repeatedly during playback.
• ¢ : Skips to the beginning of the next or
succeeding chapter or track.
• 4 : While an MP3 is played back
Goes back to the beginning of the previous track.
TOP
MENU
MENU
PTY
NEWS/INFO
ENTER
PTY
ENTER
3
While a DVD, a CD, or a VCD is played back
Goes back to the beginning of the current or previous
chapter or track.
PTY SEARCH
CHOICE
ON SCREEN
8
7
DOWN -TUNING - UP
SLOW
4/ ¢
AUDIO SUBTITLE ANGLE ZOOM
To go to another track (only possible on a CD
and VCD without PBC) directly
CENTER
SUBWOOFER
using the number buttons
SVCD can be operated by using the VCD operation
procedure.
1
2
3
4
Pressing the number buttons during play
allows you to start playing the track number
you want.
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING
To start playback
0
Press 3.
• To select number 1 to 9, press the
corresponding number button, then press
ENTER.
• To select number 15, press 1, 5, then press
ENTER.
The source is automatically changed to the DVD
player.
“READING” appears on the display for a while, then the detected
disc type appears—DVD, VCD, CD, MP3 or JPEG. (If your TV is
turned on, the detected disc type appears on the TV screen.)
• When a disc is not loaded, “NO DISC” appears on the display.
ENTER
• To cancel a mis-entry, press CLEAR.
To stop during playback
Press 7.
Example:Playback information on the display
8
3
L
R
TITLE TRK TUNED CHP PROG EON
RDS
REPEAT 1 A–B
C
DVD
DIGITAL
ProLogic II
When a DVD, a VCD, or a CD is played back
AUDIO
CD
MHz
Hz
S
LS
RS
STEREO VCD MP3
k
Playback stops (If your TV is turned on, “7 Resume
Stop” appears on the TV screen.)
• This system can memorize the end point even when you press
7. When you start playback again by pressing 3, playback
begins from where it has been stopped—Resume play.
• To stop completely, press 7 twice. (“7 Stop” appears on the
TV screen.) The disc type appears on the display.
Title No.
Chapter No. Elapsed playing
time
VCD/CD
MP3
8
3
L
R
TRK TUNED
PROG EON
RDS
REPEAT 1 A–B
AUDIO
CD
MHz
Hz
ProLogic II
STEREO VCD MP3
k
When an MP3 disc or JPEG disc is played back
Playback stops.
Track No.
Elapsed playing
time
Disc Type
• This system can memorize the end point even when you press
7. When you start playback again by pressing 3, playback
begins from the beginning of the stopped track—Resume play.
JPEG
8
3
TRK TUNED
PROG EON
RDS
REPEAT 1 A–B
MHz
Hz
ProLogic II
STEREO
LS
RS
k
Note:
If you open the disc tray or turn off the unit, the resume play is
canceled.
File No.
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
Disc play starts from the first chapter or track of the selected disc.
• If a menu appears while playing a DVD or VCD with PBC
function, see “Disc Menu-Driven Playback” (for DVD) on page 26
or “Disc Menu-Driven Playback (Only for VCD)” on page 33.
To close the disc tray, press 0 again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Showing the On-screen Menu
You can use some functions through the on-screen menu.
STANDBY/ON
SOUND
AUDIO
TV
VCR
From the remote control ONLY:
7 Whenever a disc is loaded.
Press ON SCREEN.
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
On-screen menu appears on the TV.
CLEAR SETTINGFM MODE
Play Mode
Mode
Repeat
Repeat A–B
OSD
0
ON SCREEN
Off
Off
Off
Off
DVD
FM/AM
AUX
RDS
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
OK
AUDIOVOL
To turn off the on-screen menu
Press ON SCREEN again.
TOP
MENU
MENU
PTY
NEWS/INFO
5/∞
ENTER
PTY
ENTER
ON SCREEN
ANGLE
Showing the Information on the TV Screen
PTY SEARCH
CHOICE
ON SCREEN
You can show the following information on the TV screen while a
disc is loaded.
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
AUDIO
From the remote control ONLY:
RETURN DIMMER DSP
SLEEP
SURROUND
SUB TITLE
1 Press ON SCREEN.
The on-screen menu appears on TV-screen.
ON SCREEN
Play Mode
Mode
Repeat
Repeat A–B
OSD
RM-STHA35R
DVD CINEMA SYSTEM
Off
Off
Off
Off
OK
2 Press cursor 5/ ∞ repeatedly
to select “OSD.”
Some DVDs contain several audio languages, subtitles, and multi-
angle views.
When you find the following marks on the DVD or its package, you
can select these elements recorded on the DVD.
ENTER
Play Mode
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
Subtitles are recorded on the disc. The number
OK
3
inside the mark indicates the total number of the
recorded subtitles.
3 Press ENTER repeatedly to
Several audio languages are recorded on the disc.
The number inside the mark indicates the total
number of the recorded audio languages.
select the disc information.
• Each time you press the button, OSD
changes as following:
3
ENTER
Multi-angle views are recorded on the disc. The
number inside the mark indicates the total number
of the recorded multi-angle views.
All
On
3
Off
If you cannot find out whether your disc contains these features
listed above, you can check it by showing the on-screen display
(OSD.)
4 Press cursor 5/ ∞ repeatedly
to select “OK,” then ENTER.
The on-screen menu disappears and the
information appears on the TV.
ENTER
To turn off the disc information
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
For basic disc operations such as inserting a disc, starting
playback, and moving to another chapters, see “Basic DVD
Operations” on pages 10, 11, and “Basic Disc Operations” on
page 23.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc information
Selecting the Audio Languages
OSD: On
1
While playing back a DVD containing audio languages (sound
track), you can select the language (sound track) to listen to.
• You can set your favorite audio language as the initial audio
language. (See page 53.)
00:01:16 01:40:45
OSD: All
1
4
2
3
5
From the remote control ONLY:
00:01:16 01:40:45
DVD
AUDIO
Press AUDIO.
Audio language indicator appears on the TV screen for a
while.
Title 1/15 Chapter 2/10
Angle 1/1
Audio
Subtitle
1/3 Eng
5.1ch 48KHz
Off
• Each time you press the button while the indicator
appears on the TV screen, the audio language changes as follows:
7
6
8
1 : Elapsed playing time and remaining time
2 : Disc type
2/3 Fre
5.1ch
1/3 Eng
5.1ch
5.1ch
3/3 Spa
3 : Current title and total number of the titles on the
disc
• Ex.: 1st title is playing out of 15 titles recorded.
Ex.: When the disc has 3 selections—English,
French, and Spanish
4 : Audio language indication
• Ex.: English is selected out of 3 audio languages recorded.
See right column.
5 : Current chapter and total number of the chapters
in the current title
Selecting the Multi-Angle Views
• Ex.: 2nd chapter is playing out of 10 chapters recorded.
While playing back a DVD containing multi-angle views, you can
view the same scene at different angles.
6 : Subtitle language indication
• Ex.: When no subtitle is displayed on the TV screen.
See below.
From the remote control ONLY:
ANGLE
Press ANGLE.
7 : Signal format indicator
The angle indicator appears on the TV screen for a
while.
• Each time you press the button while the angle indicator appears
on the TV screen, the view angle changes.
• Signal format type—Linear PCM (stereo), Dolby Digital,
and DTS Digital Surround—and bit rate will be indicated.
Ex.: When the disc is encoded with Dolby Digital 5.1 ch.
8 : Multi-angle view indicator
• Ex.: When only a single angle-view is recorded on the
disc. See right column.
2/3
1/3
Selecting the Subtitles
3/3
While playing back a DVD containing subtitles in different
languages, you can select the subtitle to be displayed on the TV
screen.
• You can set your favorite subtitle language as the initial language
shown on the screen. (See page 53.)
Ex.: When the disc has 3 multi-angle views
From the remote control ONLY:
SUB TITLE
Press SUB TITLE.
Subtitle language indicator appears on the TV screen
for a while.
• Each time you press the button while the indicator appears on the
TV screen, the subtitle language changes as follows:
1/3 Eng
Off
2/3 Fre
3/3 Spa
Ex.: When the disc has 3 selections—English,
French, Spanish and no subtitle (OFF)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Moving to a Particular Portion Directly
You can move to another title, chapter, or particular scene in the
chapter directly.
STANDBY/ON
AUDIO
SOUND
TV
VCR
From the remote control ONLY:
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
SEARCH
1 Press SEARCH.
REAR-L
REAR-R
5
TEST
9
6
7
8
The search menu appears on the TV.
CLEAR SETTINGFM MODE
Search
0
_ _:_ _:_ _
_ _
Time
Title
DVD
FM/AM
AUX
RDS
_ _
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
Chapter
SEARCH
TV
VCR
TVVOL
2 Press cursor 5/∞ to select the
AUDIOVOL
item.
TOP
ENTER
MENU
MENU
PTY
NEWS/INFO
TOP MENU
MENU
Time :
Select this to
move to a
particular scene.
PTY
ENTER
3/2/5/∞
ENTER
ON SCREEN
Title:
Chapter:
Select this to move to another title.
Select this to move to another chapter.
PTY SEARCH
CHOICE
ON SCREEN
3
DOWN -TUNING - UP
SLOW
1/ ¡
CENTER
SUBWOOFER
3 Press the number buttons to
1
2
6
3
4
AUDIO SUBTITLE ANGLE ZOOM
select a desired title, chapter,
REAR-L
REAR-R
5
TEST
9
7
8
RETURN DIMMER DSP
SURROUND
or playing time.
The unit starts playback of the selected
item.
CLEAR SETTING
0
Disc Menu-Driven Playback
How to input the title and chapter number
Press the number buttons corresponding to the number, then press
ENTER to start playback.
Disc menu-driven playback is possible while playing back a DVD
with menu (menu may be still pictures or moving pictures
depending on the disc).
• When operating a disc using the disc menu, refer also to the
instructions supplied for the disc.
• To select number 5, press 5, then ENTER.
• To select number 12, press 1, 2, then ENTER.
• To select number 22, press 2, 2, then ENTER.
• To cancel a mis-entry, press CLEAR.
DVD discs generally have their own menus or title lists. A menu
usually contains various information about the disc and playback
selections. On the other hand, a title list usually contains titles of
movies and songs recorded.
How to input the playing time
Press the number buttons to input the playing time, then press
ENTER to start playback at the selected elapsed playing time.
• To input time “00:45:23,” press 4, 5, 2, 3, then ENTER.
• To input time “01:23:45,” press 1, 2, 3, 4, 5, then ENTER.
• To cancel a mis-entry, press CLEAR.
From the remote control ONLY:
TOP
MENU
MENU
1 Press MENU or TOP MENU.
A menu or title list will appear on the
screen.
• On some DVDs, a menu will automatically appear on the
screen after playback starts.
2 Select a desired item on the
menu or on the title list, using
cursor 3/2/5/∞ and
ENTER
ENTER.
The unit starts playback of the selected
item.
• On some discs, you can also select items by pressing the
number buttons corresponding to the item numbers listed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Particular Point
3 Press ENTER repeatedly to
select the repeat mode.
• Each time you press the button,
Repeat mode changes as follows:
You can search for a particular portion while playing a disc—
Variable Speed Forward/Reverse Search.
• No sound comes out during Variable Speed Forward/Reverse
Search.
ENTER
Chapter Repeat
Title Repeat
To fast-forward the chapter—Variable Speed
Forward Search
From the remote control ONLY:
Disc Repeat
Off
Press ¡ during playback.
• Each time you press the button, the search speed
changes as follows:
Chapter Repeat:
Title Repeat:
Disc Repeat:
Off:
Current chapter will be repeated. (the
REPEAT 1 indicator lights up.)
Current title will be repeated. (the
REPEAT indicator lights up.)
Disc will be repeated. (the REPEAT
indicator lights up.)
x2
x4
x8
x20
Repeat play is canceled. (Normal play
is resumed.)
To resume normal play
Press 3.
4 Press cursor 5/∞ to select
“OK,” then ENTER.
ENTER
To reverse the chapter—Variable Speed Reverse
Search
From the remote control ONLY:
To cancel repeat play
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
Press 1 during playback.
• Each time you press the button, the search speed
changes as follows:
7 A–B Repeat
While playing, you can also select a portion you want to repeat.
• A–B repeat is not performed between different titles.
x2
x4
x8
x20
Example:
To resume normal play
Press 3.
A –
Repeating Playback
A–B
Repeat play cannot be used in the following cases:
• When you enjoy program play
7 Repeat Play
From the remote control ONLY:
From the remote control ONLY:
1 Press ON SCREEN.
1 Press ON SCREEN.
The on-screen menu appears on the TV.
The on-screen menu appears on the TV.
ON SCREEN
Play Mode
ON SCREEN
Play Mode
Mode
Repeat
Repeat A–B
OSD
Mode
Off
Off
Off
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
Off
OK
OK
2 Press cursor 5/∞ to select
“Repeat.”
ENTER
Play Mode
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
OK
TO BE CONTINUED ON THE NEXT PAGE
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Playing Back Chapters in Random Order
— Shuffle Play
STANDBY/ON
AUDIO
SOUND
TV
VCR
You can playback chapters in random order.
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
From the remote control ONLY:
REAR-L
REAR-R
5
TEST
9
6
7
8
1 Press ON SCREEN.
CLEAR SETTINGFM MODE
0
The on-screen menu appears on the TV.
DVD
FM/AM
AUX
RDS
ON SCREEN
Play Mode
Mode
Repeat
Repeat A–B
OSD
Off
Off
Off
Off
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
VCR
TVVOL
AUDIOVOL
OK
TOP
MENU
PTY
MENU
NEWS/INFO
2 Press cursor 5/∞ to select
3/2/5/∞
ENTER
“Mode.”
PTY
ENTER
ENTER
ON SCREEN
Play Mode
PTY SEARCH
Mode
Off
Off
Off
Off
CHOICE
ON SCREEN
7
Repeat
Repeat A–B
OSD
3
DOWN -TUNING - UP
SLOW
OK
3 Press ENTER repeatedly to
select “Shuffle.”
2 Press cursor 5/∞ to select
ENTER
“Repeat A–B.”
• Each time you press the button, play
mode changes as follows:
Play Mode
ENTER
Shuffle
Program
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
Off
OK
4 Press cursor 5/∞ to select
“OK”, then press ENTER.
The on-screen menu disappears.
ENTER
3 Press ENTER to select the start
point.
ENTER
“A–” appears on the display and “ A–”
appears on the TV.
4 Press ENTER again to select
5 Press 3.
Playback starts in random order.
the end point.
ENTER
“A–” changes to “A–B”, then A–B
repeat begins.
The unit automatically locates point A
and starts repeated playback between points A and B.
To cancel shuffle play
5 Press ON SCREEN again.
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
The on-screen menu disappears.
ON SCREEN
Notes:
To cancel A–B Repeat
• When all chapters in the current title have been played once,
shuffle play ends.
• The same chapter will not be played more than once during shuffle
play.
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
“A–B” disappears, and resume normal playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Playing Order of the
Chapters — Program Play
6 Press cursor 3 to select the
chapter number.
ENTER
Program
Title/Chapter
You can arrange the chapter playback order before you start playing.
You can program up to 12 steps.
1
2 _ _ 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
Play Program
Clear All
From the remote control ONLY:
1 Press ON SCREEN.
The on-screen menu appears on the TV.
ON SCREEN
CENTER
SUBWOOFER
7 Press the number button to
Play Mode
Mode
Repeat
Repeat A–B
OSD
1
2
3
4
enter the chapter number.
REAR-L
REAR-R
Off
Off
Off
Off
5
6
7
8
TEST
CLEAR SETTING
Program
Title/Chapter
9
0
1
2 _ 3 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
OK
Play Program
Clear All
2 Press cursor 5/∞ to select
• To select number 5, press 5.
• To select number 12, press 1, 2.
• To cancel a mis-entry, press CLEAR.
“Mode.”
Play Mode
ENTER
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
8 Press cursor 3/2/5/∞ to select
next program step number.
ENTER
OK
Program
Title/Chapter
1
2
3 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
3 Press ENTER repeatedly to
Play Program
Clear All
select “Program.”
ENTER
• Each time you press the button, play
mode changes as follows:
9 Repeat steps 5 to 8 to program other chapters
you want.
Shuffle
Program
10 Press cursor 3/2/5/∞ to
select “Play Program”, then
Off
ENTER
press ENTER.
4 Press cursor 5/∞ to select
“OK”, then press ENTER.
The Program menu appears on the TV.
The Program menu disappears and
PROG indicator appears on the display.
The chapters are played in the order you
have programmed.
ENTER
Title Number
Chapter Number
Program
Title/Chapter
To stop during playback
Press 7.
1 _ _ _ _ 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
Play Program
Clear All
5 Press the number button to
CENTER
SUBWOOFER
1
2
3
4
enter a title number.
REAR-L
REAR-R
5
TEST
6
7
8
Program
Title/Chapter
CLEAR SETTING
1 _ 2 _ _ 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
9
0
Play Program
Clear All
• To select number 5, press 5.
• To select number 12, press 1, 2.
• To cancel a mis-entry, press CLEAR.
TO BE CONTINUED ON THE NEXT PAGE
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
DVD Special Effect Playback
STANDBY/ON
AUDIO
7 Still Picture/Frame-by-Frame Playback
SOUND
TV
VCR
You can advance the still picture frame by frame while playing a
DVD.
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
From the remote control ONLY:
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
CLEAR
1 Press 8 once during playback.
0
A still picture appears on the TV screen.
DVD
FM/AM
AUX
RDS
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
8
PAUSE
TV
VCR
TVVOL
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
PTY
ENTER
2 Press 8 repeatedly to advance the
ON SCREEN
picture frame by frame.
• Each time you press the button, the picture
advances frame by frame.
PTY SEARCH
CHOICE
ON SCREEN
8
3
DOWN -TUNING - UP
SLOW
SLOW +/–
AUDIO SUBTITLE ANGLE ZOOM
83STEP
83STEP
83STEP
83STEP
83STEP
83STEP
ZOOM
RETURN DIMMER DSP
SLEEP
SURROUND
RM-STHA35R
DVD CINEMA SYSTEM
To resume normal play
Press 3.
To exit from program play
From the remote control ONLY:
1) Press ENTER repeatedly to select “Off” in step 3 on page 29.
2) Press cursor 5/∞ to select “OK”, then ENTER.
To check the program contents
1) Press ON SCREEN.
2) Press cursor 5/∞ to select “Mode.”
3) Press ENTER repeatedly to select “Program” again even
though “Program” is selected in Step 2.
4) Press cursor 5/∞ to select “OK”, then ENTER.
The program menu appears on the TV.
To disappear program contents, press ON SCREEN twice.
To erase the stored program
1) Repeat steps 1 to 4 on page 29.
2) Press cursor 3/2/5/∞ to select “Clear All”, then ENTER.
To modify the program
You can modify the program while the program menu screen is
shown on the TV screen.
• To erase a step: Press cursor 3/2/5/∞ to select (highlight) an
title or chapter in unwanted step, then press CLEAR.
• To modify a step: Press cursor 3/2/5/∞ to select (highlight) a
title or chapter you want to modify, then perform steps 5 to 8 on
page 29. (Before entering a new number, press CLEAR)
• To add a step: Press cursor 3/2/5/∞ to select (highlight) an
empty program step, then perform steps 5 to 8 on page 29.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Slow Motion Playback
7 Zoom
You can enjoy slow motion playback while playing a DVD.
You can zoom on the picture while playing back a DVD.
From the remote control ONLY:
From the remote control ONLY:
1 Press 8 at the point where you want to
start playback in slow-motion.
1 Press ZOOM.
ZOOM
The zoom indicator appears on the TV.
A still picture appears on the TV screen.
SLOW
2 Press SLOW + or SLOW –.
• Each time you press the button, slow
motion speed changes as follows.
Forward:
• Each time you press the button while the indicator appears, the
magnification changes as follows:
1
1
1
1
/
/
/
/
4
3
5
2
No Zoom
Zoom out (12 steps)
Zoom in (12 steps)
Reverse:
1
1
1
1
/
4
3
5
2
/
/
1
/
1
2 Press cursor 3/2/5/∞ to move
the portion you want to watch.
/
ENTER
To cancel the zoom
Press 3.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
Showing the Information on the TV Screen
You can show the following information on the TV screen while a
disc is loaded.
STANDBY/ON
SOUND
AUDIO
TV
VCR
Number
buttons
CENTER
SUBWOOFER
From the remote control ONLY:
1
2
3
4
REAR-L
REAR-R
1 Press ON SCREEN.
5
TEST
9
6
7
8
The on-screen menu appears on TV-screen.
CLEAR SETTINGFM MODE
ON SCREEN
0
Play Mode
DVD
FM/AM
AUX
RDS
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
SEARCH
MENU
TV
VCR
TVVOL
OK
AUDIOVOL
TOP
2 Press cursor 5/∞ repeatedly to
MENU
MENU
PTY
NEWS/INFO
select “OSD.”
5/∞
ENTER
PTY
ENTER
ENTER
Play Mode
ON SCREEN
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
PTY SEARCH
CHOICE
ON SCREEN
3
DOWN -TUNING - UP
SLOW
OK
4 / ¢
AUDIO SUBTITLE ANGLE ZOOM
3 Press ENTER repeatedly to
RETURN DIMMER DSP
SLEEP
SURROUND
RETURN
select the disc information.
• Each time you press the button, OSD
changes as following:
ENTER
RM-STHA35R
DVD CINEMA SYSTEM
All
On
Off
4 Press cursor 5/∞ repeatedly to select “OK,”
• SVCD can be operated by using the VCD operation
procedure.
• For basic disc operations such as inserting a disc, starting
playback, and moving to another tracks, see “Basic VCD/
CD Operations” on pages 12, 13, and “Basic Disc
Operations” on page 23.
then ENTER.
The on-screen menu disappears and the information appears on
the screen.
To turn off the disc information
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
Showing the On-screen Menu
Disc information
You can use some functions through the on-screen menu.
OSD: On
OSD: All
1
7 Whenever a disc is loaded.
Press ON SCREEN.
The on-screen menu appears on the TV.
00:01:16 01:06:35
ON SCREEN
Play Mode
2
1
3
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
00:01:16 01:06:35
VCD 2.0
Track 1/15
OK
1 : Elapsed playing time and remaining time
To turn off the on-screen menu
Press ON SCREEN again.
2 : Disc type and VCD version number
• VCD version number appears when only VCD is loaded
(On some VCD, the version number is not shown).
3 : Current track and total number of the tracks on
the disc
• Ex.: 1st track is playing out of 15 tracks recorded.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Menu–Driven Playback (Only for VCD)
Moving to a Particular Portion Directly
The Play Back Control function (PBC) allows you to operate the
VCD using menus.
When you start playing a VCD with PBC function, a menu will
automatically appear on the TV screen.
• A menu may be a list of items, divided screens, or some moving
pictures. (See “PBC operation concept” below.)
You can move to a particular portion (scene) on the track directly.
• PBC function is canceled when you use this function.
From the remote control ONLY:
SEARCH
1 Press SEARCH during playback or pause.
When a menu appears, you can select a desired item on the menu.
• When a list of items is displayed on the TV screen, press the
number buttons to select an item.
• Each time you press the button, the following
indication appears on the TV screen.
Track Search
Disc Search
• When “3” or “SELECT” is displayed on the TV screen, press
3 to start playback.
canceled
From the remote control ONLY:
To go to the next submenu
Press ¢.
2 Press cursor 5/∞ to select the
item (only for Disc search.)
ENTER
Track Search:
To return to the previous submenu
Press 4.
Time :
Select this to move to a
particular portion on the
current track.
Disc Search:
PBC operation
concept
Time :
Select this to move to a particular portion on the
current disc.
Track:
Select this to move to a particular track on the current
disc.
CENTER
SUBWOOFER
3 Press number buttons to select
1
2
6
3
4
a desired track or playing
REAR-L
REAR-R
5
TEST
9
7
8
time.
CLEAR SETTING
The unit starts playback of the selected
item.
0
From the remote control ONLY:
To cancel the PBC playback
MENU
How to input the playing time
You can turn on and off the PBC function by pressing
MENU on the remote control. Each time you press the
button, the PBC function turns on and off.
• To input time “09:45,” press 9, 4, 5, then ENTER.
• To input time “45:23,” press 4, 5, 2, 3, then ENTER.
• To cancel a misentry, press CLEAR.
Note:
How to input the track number
Press the number buttons corresponding to the number, then
press ENTER to start playback.
If you select shuffle play, program play, or repeat play, the PBC
function is canceled.
• To select number 5, press 5, then ENTER.
• To select number 12, press 1, 2, then ENTER.
• To cancel a misentry, press CLEAR.
To activate the PBC function
1) Press ON SCREEN.
2) Press cursor 5/∞ to select “Mode.”
3) Press ENTER repeatedly to select “PBC.”
4) Press cursor 5/∞ to select “OK,” then press ENTER.
Note:
When playing back is stopped, you can use only Disc Search.
Selecting Playback Channel
When you play back VCD or CD, you can only select either the left
channel or right channel to listen to.
Press AUDIO repeatedly.
Each time you press the button, the sound mode changes
AUDIO
as follows:
Stereo \ Left channel \ Right channel
\ (back to the begininng)
Notes:
• While activating Surround mode or DSP mode, this function does
not work.
• On some discs, this function does not work.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
Repeating Playback
Repeat play cannot be used in the following cases:
• When you enjoy program play
STANDBY/ON
SOUND
AUDIO
TV
VCR
CENTER
SUBWOOFER
7 Repeat Play
From the remote control ONLY:
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
1 Press ON SCREEN.
0
The on-screen menu appears on the TV.
ON SCREEN
DVD
FM/AM
AUX
RDS
Play Mode
Mode
Repeat
Repeat A–B
OSD
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
Off
Off
Off
Off
TV
VCR
TVVOL
AUDIO VOL
OK
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
2 Press cursor 5/∞ to select “Repeat.”
PTY
ENTER
Play Mode
ON SCREEN
ENTER
Mode
Off
Off
Off
Off
PTY SEARCH
Repeat
Repeat A–B
OSD
CHOICE
ON SCREEN
3
DOWN -TUNING - UP
SLOW
1/¡
OK
AUDIO SUBTITLE ANGLE ZOOM
3 Press ENTER repeatedly to
select the repeat mode.
• Each time you press the button, Repeat
mode changes as follows:
Searching for a Particular Point
ENTER
You can search for a particular portion while playing a disc—
Variable Speed Forward/Reverse Search.
• No sound comes out during Variable Speed Forward/Reverse
Search on a VCD.
Single
Off
All
To fast-forward the tracks—Variable Speed
Forward Search
From the remote control ONLY:
Single:
All:
Current track be repeated. (REPEAT
1 indicator lights up.)
Disc will be repeated. (REPEAT
indicator lights up.)
Repeat play is canceled. (Normal play
is resumed.)
Press ¡ during playback.
• Each time you press the button, the search speed
changes as follows:
Off:
x2
x4
x8
4 Press cursor 5/∞ to select
x20
“OK,” then ENTER.
The on-screen menu disappears and
repeat playback starts.
To resume normal play
Press 3.
ENTER
To cancel repeat play
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
To reverse the tracks—Variable Speed Reverse
Search
From the remote control ONLY:
Press 1 during playback.
• Each time you press the button, the search speed changes as
follows:
x2
x4
x8
x20
To resume normal play
Press 3.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
7 A–B Repeat
While playing, you can also select a portion you want to repeat.
Playing Back Tracks in Random Order
— Shuffle Play
You can playback chapters in random order.
Example:
From the remote control ONLY:
A –
1 Press ON SCREEN.
The on-screen menu appears on the TV.
ON SCREEN
Play Mode
Mode
Off
Off
Off
Off
A–B
Repeat
Repeat A–B
OSD
OK
From the remote control ONLY:
1 Press ON SCREEN.
2 Press cursor 5/∞ to select
The on-screen menu appears on the TV.
“Mode.”
ON SCREEN
ENTER
Play Mode
Mode
Repeat
Repeat A–B
OSD
Play Mode
Off
Off
Off
Off
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
OK
OK
2 Press cursor 5/∞ to select
“Repeat A–B.”
3 Press ENTER repeatedly to
ENTER
Play Mode
select “Shuffle.”
Mode
Off
Off
Off
Off
ENTER
Repeat
Repeat A–B
OSD
• Each time you press the button, play
mode changes as follows:
OK
Program
PBC*
Shuffle
Off
3 Press ENTER to select the start
point.
ENTER
ENTER
* Appears when only VCD with PBC is loaded
“A–” appears on the display and “ A–”
appears on the TV.
4 Press cursor 5/∞ to select
“OK”, then press ENTER.
The on-screen menu disappears.
4 Press ENTER again to select
ENTER
the end point.
“A–” changes to “A–B”, then A–B repeat
begins.
The unit automatically locates point A
and starts repeated playback between
points A and B.
5 Press 3.
playback starts in random order.
5 Press ON SCREEN again.
The on-screen menu disappears.
ON SCREEN
To cancel shuffle play
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
To cancel A–B Repeat
1) Press ENTER repeatedly to select “Off” in step 3.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
“A–B” disappears, and resume normal playback.
Notes:
• When all tracks have been played once, shuffle play ends.
• The same track will not be played more than once during shuffle
play.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
3 Press ENTER repeatedly to
STANDBY/ON
SOUND
AUDIO
select “Program.”
ENTER
TV
VCR
Number
buttons
CENTER
SUBWOOFER
• Each time you press the button, play
mode changes as follows:
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
Program
PBC*
Shuffle
Off
0
DVD
FM/AM
AUX
RDS
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
VCR
* Appears when only VCD with PBC is loaded
TVVOL
AUDIOVOL
4 Press cursor 5/∞ to select
“OK”, then press ENTER.
The Program menu appears on the TV.
TOP
MENU
MENU
PTY
NEWS/INFO
ENTER
3/2/5/∞
Track Number
Program
ENTER
PTY
ENTER
ON SCREEN
3
7
1 _ _ _
2 _ _ _
3 _ _ _
4 _ _ _ 7 _ _ _
5 _ _ _ 8 _ _ _
6 _ _ _ 9 _ _ _
10 _ _ _
11 _ _ _
12 _ _ _
PTY SEARCH
CHOICE
ON SCREEN
8
Play Program
Clear All
SLOW +/–
DOWN -TUNING - UP
SLOW
ZOOM
AUDIO SUBTITLE ANGLE ZOOM
CENTER
SUBWOOFER
5 Press the number button to
RETURN DIMMER DSP
SLEEP
SURROUND
1
2
3
4
enter a track number.
REAR-L
REAR-R
5
6
7
8
Program
TEST
CLEAR SETTING
1 _ 1 2
2 _ _ _
3 _ _ _
4 _ _ _ 7 _ _ _
5 _ _ _ 8 _ _ _
6 _ _ _ 9 _ _ _
10 _ _ _
11 _ _ _
12 _ _ _
9
0
RM-STHA35R
DVD CINEMA SYSTEM
Play Program
Clear All
• To select number 5, press 5.
• To select number 12, press 1, 2.
• To cancel a mis-entry, press CLEAR.
Programming the Playing Order of the
Tracks — Program Play
6 Press cursor 3/2/5/∞ to select
next program step.
Program
ENTER
You can arrange the track playback order before you start playing.
You can program up to 12 steps.
1
1 2
4 _ _ _ 7 _ _ _
5 _ _ _ 8 _ _ _
6 _ _ _ 9 _ _ _
10 _ _ _
11 _ _ _
12 _ _ _
2 _ _ _
3 _ _ _
Play Program
Clear All
From the remote control ONLY:
1 Press ON SCREEN.
7 Repeat steps 5 to 6 to program other tracks you
The on-screen menu appears on the TV.
want.
ON SCREEN
Play Mode
Mode
Off
Off
Off
Off
8 Press cursor 3/2/5/∞ to select
Repeat
Repeat A–B
OSD
“Play Program”, then press
ENTER.
ENTER
OK
The Program menu disappears and
the PROG indicator appears on the
display.
2 Press cursor 5/∞ to select
“Mode.”
The tracks are played in the order you have programmed.
Play Mode
ENTER
Mode
Off
Off
Off
Off
Repeat
Repeat A–B
OSD
To stop during playback
Press 7.
OK
36
Download from Www.Somanuals.com. All Manuals Search And Download.
To exit from program play
7 Slow Motion Playback
From the remote control ONLY:
You can enjoy slow motion playback while playing a VCD.
1) Press ENTER repeatedly to select “Off” in step 3 on page 36.
2) Press cursor 5/∞ to select “OK”, then press ENTER.
Playback changes to normal play and the stored program is cleared.
From the remote control ONLY:
1 Press 8 at the point where you want to
start playback in slow-motion.
To check the program contents
1) Press ON SCREEN.
A still picture appears on the TV screen.
2) Press cursor 5/∞ to select “Mode.”
2 Press SLOW +.
SLOW
3) Press ENTER repeatedly to select “Program” again even
though “Program” is selected in Step 2.
4) Press cursor 5/∞ to select “OK”, then ENTER.
The program menu appears on the TV.
• Each time you press the button, slow motion
speed changes as follows.
To disappear program contents, press ON SCREEN twice.
1
1
1
1
/
/
/
/
4
3
5
2
To erase the stored program
1) Repeat steps 1 to 4 on page 36.
2) Press cursor 3/2/5/∞ to select “Clear All”, then ENTER.
To modify the program
You can modify the program while the program menu screen is
shown on the TV.
To resume normal play
Press 3.
• To erase a step: Press cursor 3/2/5/∞ to select (highlight) an
unwanted track, then press CLEAR.
• To modify a step: Press cursor 3/2/5/∞ to select (highlight) a
track you want to modify, then perform steps 5 to 6 on page 36
(Before entering a new number, press CLEAR)
• To add a step: Press cursor 3/2/5/∞ to select (highlight) an
empty program step, then perform steps 5 to 6 on page 36.
7 Zoom
You can zoom on the picture while playing back a VCD.
From the remote control ONLY:
VCD Special Effect Playback
1 Press ZOOM.
ZOOM
The zoom indicator appears on the TV.
7 Still Picture/Frame-by-Frame Playback
You can advance the still picture frame by frame while playing a
VCD.
From the remote control ONLY:
1 Press 8 once during playback.
A still picture appears on the TV screen.
• Each time you press the button while the indicator appears, the
magnification changes as follows:
8
PAUSE
No Zoom
Zoom out (12 steps)
Zoom in (12 steps)
2 Press cursor 3/2/5/∞ to move
the portion you want to watch.
2 Press 8 repeatedly to advance the
ENTER
picture frame by frame.
• Each time you press the button, the picture
advances frame by frame.
83STEP
83STEP
83STEP
83STEP
83STEP
83STEP
To cancel the zoom
Press 3.
To resume normal play
Press 3.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
This system is incorporated with an MP3 decoder. You can playback
MP3 tracks (files) recorded on CD-Rs, CD-RWs, and CD-ROMs.
• Notice that “files” and “tracks” are used interchangeably.
Example: MP3 disc structure and playback order
Hierarchies
What is MP3?
R
oot
1
2
MP3 is an abbreviation of Motion Picture Experts Group (or MPEG)
Audio Layer 3. MP3 is simply a file format with a data compression
ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one
CD-R or CD-RW can contain 10 times as much data volume as a
regular CD can.
1
4
5
6
2
3
* Bit rate is the average number of bits that one second of audio data
will consume. The measuring unit used is Kbps (1000 bits per
second).
To get a better audio quality, choose a higher bit rate. The most
popular bit rate for encoding (recording) is 128 Kbps.
3
7
8
9
4
5
-
=
~
6
MP3 File Compatibility
0
• This system can only read MP3 files that are recorded in the
format that is compliant with ISO 9660 Level 1 or Level 2.
• The system can play MP3 files only with the following file
extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• This unit can show ID3v1* tags on the TV-screen.
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There are
two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag
version 2).
!
@
#
7
8
9
$
%
^
&
*
(
• This unit is not compatible with ID3v2.
Disc structure—How are MP3 files recorded
and played back?
“MP3 files (tracks)” can be recorded in “folders,” in PC
terminology.
: Indicates folders
: Indicates files (tracks)
During recording, the files and folders can be arranged in a way
similar to arranging files and folders of computer data.
“Root” is similar to the root of a tree. Every file and directory can be
linked to the root.
In compliance with ISO 9660, the maximum allowable depth of
nested folders—so-called “hierarchy”—is eight (inclusive of the
root).
Playback order, files search order, and folder search order of the
MP3 files recorded on a disc are determined by the writing (or
encoding) application; therefore, playback order may be different
from the one you have intended while recording the folders and the
files.
NOTES for MP3 disc
• MP3 discs (either CD-R or CD-RW) require a longer readout time.
(It differs due to the complexity of the folder/file configuration.)
• When an MP3 disc is loaded, you cannot adjust the subwoofer
output level.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
The on-screen display
STANDBY/ON
AUDIO
SOUND
3
4 5
1 2
TV
VCR
Play Track 1/28
CARD
00:00:17
Brow Disc
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
CENTER
SUBWOOFER
_
1
2
3
4
1
SOLITAIRE
6
7
8
9
REAR-L
REAR-R
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
COPAC.MP3 10 RUMMY.MP3
0
File:BEZIQUE.mp3
Artist:
DVD
FM/AM
AUX
RDS
Album:
Song:
Genre:
Comments:
Year:
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
6
7
AUDIOVOL
1 : Track number
TOP
MENU
MENU
PTY
NEWS/INFO
2 : Current folder name
3/2/5/∞
ENTER
3 : Current track (file) and total number of the tracks
in the current folder
PTY
ENTER
3
• Ex.: 1st track is playing out of 28 tracks recorded.
PTY SEARCH
CHOICE
ON SCREEN
4 : Play mode
8
7
5 : Elapsed playing time
6 : Playback track (highlight)
4 / ¢
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
7 : File information
RETURN DIMMER DSP
SLEEP
SURROUND
• If the MP3 file has ID3v1 tag, file information appears.
RM-STHA35R
DVD CINEMA SYSTEM
To go to another track
Press ¢ or 4 during playback.
For in-depth information about a disc to be played back, see
“Disc Introduction—DVD/VCD/CD” on page 22.
• ¢ : Skip to the beginning of the next track.
Starting Playback
• 4 : Skip to the beginning of the previous track.
It is recommended to turn on your TV when playing back an MP3
disc.
1 Insert an MP3 disc.
To stop playback for a moment
After detecting the disc, on-screen display appears on the TV.
Press 8.
Track 1/28
Stop
CARD
_
Brow Disc
1
SOLITAIRE
6
7
8
9
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
To resume play, press 3.
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
COPAC.MP3 10 RUMMY.MP3
To stop during playback
File:BEZIQUE.mp3
Artist:
Album:
Song:
Genre:
Comments:
Year:
Press 7.
To start playback again
Press 3.
The marked (highlight) track starts playback.
2 Press cursor 3/2/5/∞ to select
the track, then press ENTER.
Playback starts.
ENTER
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
Note:
If the loaded disc is not recorded in the audio CD format, MP3 format,
or JPEG format, “Error” appears on the TV screen.
To close the disc tray, press 0 again.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
To start playback of the
selected track
Press cursor 3/2/5/∞ to select the track,
STANDBY/ON
AUDIO
ENTER
SOUND
TV
VCR
then press ENTER.
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
Notes:
CLEAR SETTINGFM MODE
0
• Only 10 tracks can be shown on the TV.
To move to next 10 tracks, press cursor 3 repeatedly.
To move to previous 10 tracks, press cursor 2 repeatedly.
• If you move to another folder, playing back stops.
DVD
FM/AM
AUX
RDS
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
VCR
TVVOL
Moving to a Particular Track Directly
You can move to a particular track on the current folder directly.
From the remote control ONLY:
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
PTY
ENTER
CENTER
SUBWOOFER
Press the number buttons to
select a track number you
3
1
2
6
3
4
REAR-L
REAR-R
PTY SEARCH
CHOICE
ON SCREEN
5
TEST
9
7
8
want.
8
7
CLEAR SETTING
The system starts playback from the
selected track.
0
4 / ¢
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
• To select number 5, press 5 then press ENTER.
• To select number 10, press 1, 0 then press ENTER.
• To select number 23, press 2, 3 then press ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
RETURN DIMMER DSP
SLEEP
SURROUND
RM-STHA35R
DVD CINEMA SYSTEM
Programming the Playing Order of the
Tracks — Program Play
Operations Using the On-Screen Display
It is recommended to turn on your TV when playing back an MP3
disc.
You can arrange the track playback order before you start playing.
From the remote control ONLY:
When the loaded MP3 disc is recognized, the following on-screen
display appears on the TV screen. (The contents of this on-screen
display varies according to the disc—the way MP3 tracks were
recorded on the disc.)
1 Press cursor 3/2/5/∞ to
select “Brow Disc,” then press
ENTER
ENTER.
“Brow Disc (Browse Disc) ” changes
to “Crea Prog (Create Program).”
From the remote control ONLY:
Stop Track 1/28
CARD
00:00:00
Crea Prog
_
1
SOLITAIRE
6
7
8
9
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
Button
ENTER
To do
COPAC.MP3 10 RUMMY.MP3
Start playback or go into a folder.
Select a track or folder.
2 Press cursor 3/2/5/∞ to select
3 / 2 / 5 / ∞
the track.
ENTER
Stop Track 1/28
00:00:00
Crea Prog
_
CARD
1
SOLITAIRE
6
7
8
9
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
COPAC.MP3 10 RUMMY.MP3
40
Download from Www.Somanuals.com. All Manuals Search And Download.
You can perform following operation same as in normal playback.
3 Press ENTER.
The selected track is marked (highlight).
To go to another track
Press ¢ or 4 during playback.
• ¢ : Skip to the beginning of the next track.
ENTER
Stop Track 1/28
CARD
00:00:00
Crea Prog
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
_
1
SOLITAIRE
6
7
8
9
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
COPAC.MP3 10 RUMMY.MP3
• 4 : Skip to the beginning of the previous track.
• If you press ENTER again, the marked track is canceled.
4 Repeat steps 2 to 3 to program other tracks you
want.
To stop playback for a moment
Press 8.
Stop Track 1/28
CARD
00:00:00
Crea Prog
_
1
SOLITAIRE
6
7
8
9
CRIBBAGE.
HEART.MP3
OLDMAID.M
PINOCLE.M
2
3
4
5
BEZIQUE.m
BRIDGE.mp3
CANASTA.m
To resume play, press 3.
COPAC.MP3 10 RUMMY.MP3
To stop during playback
Press 7.
• You can select the track in another folders.
• You cannot select same track more than once during program
play.
To start playback again
Press 3.
5 Press cursor 3/2/5/∞ to select
“Crea Prog,” then press
ENTER
ENTER.
“Crea Prog (Create Program)” changes
to “Brow Prog (Browse Program),” and
selected tracks appear on the TV.
To start playback of the selected track
Press cursor 3/2/5/∞ to select the
track, then press ENTER.
Stop Track 1/28
Selected Files:
00:00:00
Brow Prog
CANASTA.m
ENTER
1
2
3
4
5
6
BRIDGE.mp3
RUMMY.MP3
CRIBBAGE.
OLDMAID.M
HEART.MP3
To move to a particular track directly
6 Press cursor 3/2/5/∞ to
Press the number buttons to select a
CENTER
SUBWOOFER
track number you want.
• To select number 5, press 5 then press
ENTER.
• To select number 10, press 1, 0 then press
ENTER.
select the start track, then
1
2
6
3
4
ENTER
REAR-L
REAR-R
press ENTER.
The tracks are played in the order you
have programmed.
5
TEST
9
7
8
CLEAR SETTING
0
• To select number 23, press 2, 3 then press
ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
To exit from program play
From the remote control ONLY:
ENTER
Press cursor 3/2/5/∞ to select “Brow
Prog,” then press ENTER.
“Brow Prog (Browse Program)” changes
to “Brow Disc (Browse disc).”
Playback stops and the stored program is cleared.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG Playback
What is JPEG?
A still-picture data compression system proposed by the Joint
Photographic Expert Group, which features small decrease in image
quality in spite of its high compression ratio.
STANDBY/ON
AUDIO
SOUND
TV
VCR
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
Disc structure
5
TEST
9
6
7
8
On a JPEG disc, each still picture (material) is recorded as a file.
Files are usually grouped into a folder. Folders can also include
another folders, creating hierarchical folder layers.
This system simplifies the hierarchical construction of a disc and
manages folders by “groups.”
CLEAR SETTINGFM MODE
0
DVD
FM/AM
AUX
RDS
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
This system can recognize up to 999 items in one folder, items
including subfolders and files.
AUDIOVOL
• If there is any type of files other than JPEG files in a folder, those
files are also counted in the total number of 999.
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
NOTES for JPEG disc
PTY
ENTER
• JPEG discs (either CD-R or CD-RW) require a longer readout
time. (It differs due to the complexity of the directory/file
configuration.)
3
PTY SEARCH
CHOICE
ON SCREEN
8
7
• When making a JPEG disc, select ISO 9660 Level 1 or Level 2 as
the disc format.
4 / ¢
DOWN -TUNING - UP
SLOW
• This system supports “multi-session” discs (up to 5 sessions).
• This system cannot play “packet write” discs.
• The system can play JPEG files only with the following file
extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any uppercase
and lowercase combination (such as “.Jpg”).
AUDIO SUBTITLE ANGLE ZOOM
ZOOM
RETURN DIMMER DSP
SLEEP
SURROUND
• We recommend to record a file at 640 x 480 resolution. (If a file
has been recorded at a resolution of more than 640 x 480, it will
take a longer time to be shown.)
RM-STHA35R
DVD CINEMA SYSTEM
• This system can play only baseline JPEG files*. Progressive JPEG
files* or lossless JPEG files* cannot be played.
• Some JPEG discs may not be played back because of their disc
characteristics or recording conditions.
Loading the Disc
* • Baseline JPEG format: Used for digital cameras, web, etc.
• Progressive JPEG format: Used for web.
• Lossless JPEG format: An old type and rarely used now.
Insert a JPEG disc.
After detecting the disc, on-screen display appears on the TV.
Stop Track 1/22
_
Brow Disc
GREEN.JPG
ORANGE.JP
Color
Rainbow
AZURE.JPG
BLACK.JPG
BLUE.JPG
CYAN.JPG
1
6
7
8
2
3
4
5
PURPLE.JP
9
10
WHITE.JPG
YELLOW.JP
42
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop the slide-show playback temporarily
Press 8 on the remote control.
Operations Using the On-Screen Display
The on-screen display
4
1
3
Stop Track 1/22
2
00:00:00
Brow Disc
GREEN.JPG
ORANGE.JP
To resume the slide-show playback
Press 3.
_
Color
Rainbow
AZURE.JPG
BLACK.JPG
BLUE.JPG
CYAN.JPG
1
6
7
2
3
4
5
8
PURPLE.JP
9
10
WHITE.JPG
YELLOW.JP
5
To stop the slide-show playback completely
Press 7.
1 : File number
2 : Current folder name
3 : Current file and total number of the files in the
current folder
• Ex.: 1st file is playing out of 22 tracks recorded.
To skip files forward
Press ¢.
4 : Play mode
5 : Playback file (highlight)
•When press 3 to start playback slide-show, playback starts
this (highlight) file.
To skip files backward
Press 4.
From the remote control ONLY:
Button
To do
To rotate a still picture
Press cursor 3/2/5/∞.
When the slide-show stops and the picture is
rotated on the TV.
ENTER
Start playback or go into a folder.
Select a file or folder.
3/ 2 / 5 / ∞
ENTER
3: ANGLE 90
∞: ANGLE 180
2: ANGLE 270
5: ANGLE 0
To select the file.
Press cursor 3/2/5/∞.
To return to normal angle, press the button again or press 5.
ENTER
Note:
Only 10 files can be shown on the TV.
To move to next 10 files, press cursor 3 repeatedly.
To move to previous 10 files, press cursor 2 repeatedly.
To zoom in a still picture
Press ZOOM.
ZOOM
The zoom indicator appears on the TV.
• Each time you press the button while the indicator
appears, the magnification changes as follows:
To show the selected file only
Press ENTER.
The selected file (still picture) is shown on
the TV.
ENTER
No Zoom
Zoom ✕ 4
Zoom ✕ 1.25
12 steps
Notes
The picture size changes automatically to fit the TV-screen.
• While the picture is zoomed in, press cursor 3/2/5/∞ to move
the portion you want to watch.
To cancel the zoom, press 3.
To start the slide-show playback
Press 3.
Each file (still picture) is shown on the TV for about
few seconds, then changed to the next file one after
another.
• The showing time varies depending on the file size or other factor.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG Playback
Programming the Playing Order of the
Files — Program Play
STANDBY/ON
AUDIO
SOUND
TV
VCR
You can arrange the file playback order before you start playing.
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
From the remote control ONLY:
REAR-L
REAR-R
1 Press cursor 3/2/5/∞ to select
5
TEST
6
7
8
CLEAR SETTINGFM MODE
“Brow Disc,” then press
9
0
ENTER
ENTER.
DVD
FM/AM
AUX
RDS
“Brow Disc (Browse Disc) ” changes to
“Crea Prog (Create Program).”
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
Stop Track 1/22
00:00:00
Crea Prog
GREEN.JPG
ORANGE.JP
_
Color
Rainbow
AZURE.JPG
AUDIOVOL
1
6
7
8
2
3
4
5
TOP
MENU
MENU
PTY
BLACK.JPG
BLUE.JPG
CYAN.JPG
NEWS/INFO
PURPLE.JP
9
10
WHITE.JPG
3/2/5/∞
ENTER
YELLOW.JP
PTY
ENTER
3
2 Press cursor 3/2/5/∞ to select
PTY SEARCH
CHOICE
ON SCREEN
8
7
the file.
ENTER
4 / ¢
DOWN -TUNING - UP
SLOW
Stop Track 1/22
00:00:00
Crea Prog
GREEN.JPG
ORANGE.JP
_
Color
Rainbow
AZURE.JPG
AUDIO SUBTITLE ANGLE ZOOM
1
6
7
8
ZOOM
2
3
4
5
RETURN DIMMER DSP
SLEEP
SURROUND
BLACK.JPG
BLUE.JPG
CYAN.JPG
PURPLE.JP
9
10
WHITE.JPG
YELLOW.JP
RM-STHA35R
DVD CINEMA SYSTEM
3 Press ENTER.
The selected file is marked (highlight).
ENTER
Stop Track 1/22
00:00:00
Crea Prog
GREEN.JPG
ORANGE.JP
_
Color
Rainbow
AZURE.JPG
BLACK.JPG
BLUE.JPG
CYAN.JPG
1
6
7
2
3
4
5
8
PURPLE.JP
9
WHITE.JPG
Moving to a Particular File Directly
10
YELLOW.JP
You can move to a particular file on the current folder directly.
• If you press ENTER again, the marked file is canceled.
From the remote control ONLY:
4 Repeat steps 2 to 3 to program
CENTER
SUBWOOFER
Press the number buttons to
other files you want.
1
2
6
3
4
select a file number you want.
The system starts playback from the
selected file.
REAR-L
REAR-R
ENTER
Stop Track 1/22
00:00:00
Crea Prog
GREEN.JPG
ORANGE.JP
5
TEST
9
7
8
_
Color
Rainbow
AZURE.JPG
CLEAR SETTING
1
6
7
8
0
2
3
4
5
BLACK.JPG
BLUE.JPG
CYAN.JPG
PURPLE.JP
• To select number 5, press 5 then press
ENTER.
9
10
WHITE.JPG
YELLOW.JP
• To select number 10, press 1, 0 then press ENTER.
• To select number 23, press 2, 3 then press ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
• You can select the files in another folders.
• You cannot select same file more than once during program
play.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop during playback
Press 7.
5 Press cursor 3/2/5/∞ to select
“Crea Prog,” then press
ENTER
ENTER.
“Crea Prog (Create Program)” changes
to “Brow Prog (Browse Program),” and
selected files appear on the TV.
To start playback again
Press 3.
Stop Track 1/22
Selected Files:
00:00:00
Brow Prog
AZURE.JPG
1
2
3
4
5
6
BLACK.JPG
PURPLE.JP
GREEN.JPG
WHITE.JPG
CYAN.JPG
To rotate a still picture
Press cursor 3/2/5/∞.
ENTER
6 Press cursor 3/2/5/∞ to select
the start file.
ENTER
ENTER
To zoom in a still picture
Press ZOOM.
ZOOM
7 Press 3 or ENTER.
The selected files are
played in the order you
have programmed.
To start playback of the selected file
Press cursor 3/2/5/∞ to select the file,
then press ENTER.
ENTER
To exit from program play
From the remote control ONLY:
Press cursor 3/2/5/∞ to select “Brow Prog,” then press
ENTER.
To move to a particular track directly
“Brow Prog (Browse Program)” changes to “Brow Disc (Browse
disc).”
Playback stops and the stored program is cleared.
Press the number buttons to select a file
number you want.
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
• To select number 5, press 5 then press
ENTER.
5
6
7
8
TEST
CLEAR SETTING
9
0
• To select number 10, press 1, 0 then
press ENTER.
• To select number 23, press 2, 3 then press ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
You can perform following operation same as in normal playback.
To go to another file
Press ¢ or 4 during playback.
• ¢ : Skip to the beginning of the next file.
• 4 : Skip to the beginning of the previous file.
To stop playback for a moment
Press 8.
To resume play, press 3.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Tuning in Stations
From the remote control:
STANDBY/ON
SOUND
AUDIO
TV
VCR
1 Press FM/AM repeatedly to select the
FM/AM
band.
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
The last received station of the selected band is tuned
in.
• Each time you press the button, the band alternates between
FM and AM.
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
FM MODE
0
DVD
FM/AM
AUX
RDS
FM/AM
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
2 Press and hold TUNING UP or
DOWN -TUNING - UP
TVVOL
PROGRAM
DOWN until you find the frequency
you want.
AUDIOVOL
• TUNING UP
: Increases the frequency.
TOP
MENU
MENU
PTY
NEWS/INFO
• TUNING DOWN : Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
PTY
ENTER
ENTER
PTY SEARCH
CHOICE
ON SCREEN
• You can use the number button to enter the station frequency
directly
TUNING
UP/DOWN
DOWN -TUNING - UP
SLOW
1 / ¡
AUDIO SUBTITLE ANGLE ZOOM
On the front panel:
SOURCE
RETURN DIMMER DSP
SLEEP
SURROUND
1 Press SOURCE repeatedly until the
desired band appears on the display.
The last received station of the selected band is
tuned in.
RM-STHA35R
DVD CINEMA SYSTEM
• Each time you press the button, the source changes as follows:
TUNER FM
TV SOUND
DVD
TUNER AM
ANALOG IN
DIGITAL IN
For basic tuner operations, see “Basic Tuner Operations” on page
14.
2 Press and hold ¢ or 4 until
you find the frequency you want.
• ¢ : Increases the frequency.
• 4 : Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
Notes:
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you press the button repeatedly, the frequency changes step
by step.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune in a preset station
From the remote control ONLY:
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
1 Press FM/AM repeatedly to select the
FM/AM
band.
The last received station of the selected band is
tuned in.
To store the preset stations automatically
From the remote control ONLY:
Press and hold MEMORY for a while.
• Each time you press the button, the band alternates between
FM and AM.
REC/MEMORY
“AUTO SAVE” appears on the display, and automatic
preset starts.
Local stations with the strong signals are searched for and stored
automatically in the band. When FM preset is over, the band
changes to AM and automatic preset starts.
CENTER
SUBWOOFER
2 Press the number button to
1
2
6
3
4
REAR-L
REAR-R
select a preset station.
• To select number 1 to 9, press the
corresponding number button, then
press ENTER.
5
TEST
9
7
8
CLEAR SETTING
0
To store the preset stations
From the remote control ONLY:
• To select number 15, press 1, 5 then press ENTER.
• To cancel a mis-entry, press CLEAR.
1 Tune in the station you want to preset (see
“Tuning in Stations”).
• You can press ¡/1 to select the preset station.
¡: Increases the preset number.
L
R
TUNED
1: Decreases the preset number.
STEREO
MHz
Selecting the FM Reception Mode
REC/MEMORY
2 Press MEMORY.
“SAVE TO” appears on the display.
When an stereo FM program tuned currently is noisy, you can
change the FM reception mode to improve the reception.
L
R
TUNED
STEREO
From the remote control ONLY:
FM MODE
Press FM MODE.
The STEREO indicator goes off from the display and
the program loses the stereo effect.
CENTER
SUBWOOFER
3 Press the number button to
1
2
6
3
4
REAR-L
REAR-R
select a preset number.
5
7
8
TEST
CLEAR SETTING
FM MODE
• To select number 1 to 9, press the
corresponding number button.
• To select number 15, press 1, 5.
• To cancel a mis-entry, press CLEAR.
9
0
To resume the stereo effect, press FM MODE again.
The stereo effect resumes.
Note:
The FM reception mode will also resumes in the following cases:
4 Press ENTER to store the
• When you change the frequency, the preset number, or the band
• When you change the source (If you use SOURCE button on the
unit, the FM reception mode is memoried.)
preset station.
“SAVED” appears on the display and the
station is assigned to the selected preset
number.
ENTER
• When you turn off the system
5 Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
What information can RDS signals provide?
You can see the following RDS signals the station sends on the
display.
STANDBY/ON
AUDIO
SOUND
TV
VCR
PS NAME:
CENTER
SUBWOOFER
While searching, “PS NAME” appears, then the station names will
be displayed. Station frequency appears if no signal is sent.
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
Frequency:
Station frequency.
CLEAR SETTINGFM MODE
0
RDS
DVD
FM/AM
AUX
RDS
PROG TYPE (Program Type):
While searching, “PROG TYPE” appears, then the current PTY
code appears. “NO PTY” appears if no signal is sent.
RADIO TEXT:
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
While searching, “RADIO TEXT” appears, then text messages the
station sends will be displayed. “NO RT” appears if no signal is
sent.
AUDIOVOL
PTY 9/(
PTY SEARCH
ENTER
TOP
MENU
PTY
MENU
NEWS/INFO
PTY
ENTER
From the remote control ONLY:
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
PTY SEARCH
CHOICE
ON SCREEN
DOWN -TUNING - UP
SLOW
Press RDS while listening to an FM station to show the
RDS signals.
RDS
AUDIO SUBTITLE ANGLE ZOOM
• Each time you press the button, the display changes to
show the following information:
RETURN DIMMER DSP
SLEEP
SURROUND
PS NAME
Normal indication
(Frequency)
RM-STHA35R
DVD CINEMA SYSTEM
RADIO TEXT
PROG TYPE
About characters shown on the display
When the display shows PS NAME, or RT signals, the following
characters are used.
If the remote control is not for the tuner operations, the
• The display cannot differentiate upper case and lower case letters
and always uses upper case letters.
• The display cannot show accented letters, “A” for instance, may
stand for accented “A” like “Å, Ä, Ã, Á, À, Â, å, ä, ã, á, à, and â.”
button for the RDS operations—NEWS/INFO, PTY + and –,
and PTY SEARCH—do not work. In this case, press FM/AM
on the remote control so that the remote control can be used
for the tuner operation.
Note:
Using the RDS (Radio Data System)
to Receive FM Stations
If searching finishes at once, “PS NAME,” “RADIO TEXT,” and “PROG
TYPE” will not appear on the display.
RDS allows FM stations to send an additional signal along with their
regular program signals. For example, the stations send their station
names, as well as information about what type of program they
broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the
RDS indicator lights up on the display.
RDS indicator
L
R
TUNED
RDS
STEREO
MHz
Then, the display shows its PS name.
Notes:
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the tuned station is not
transmitting RDS signals properly or if the signal strength is weak.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Program by PTY Codes
PTY codes
One of the advantages of the RDS service is that you can locate a
particular kind of program from the preset channels (see page 47) by
specifying the PTY codes.
ALARM
TEST
NEWS
AFFAIRS
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset stations.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
DOCUMENT
FOLK M (Music)
OLDIES
INFO (Information)
SPORT
EDUCATE (Education)
NATION M (Music)
COUNTRY
JAZZ
DRAMA
From the remote control ONLY:
CULTURE
SCIENCE
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
1 Press PTY SEARCH while listening
LEISURE
TRAVEL
VARIED
to an FM station.
PTY SEARCH
“PTY SEARCH” appears on the display.
POP M (Music)
PHONE IN
RELIGION
SOCIAL
ROCK M (Music)
EASY M (Music)
2 Press PTY 9 or
PTY
ENTER
PTY
PTY ( until the PTY
code you want appears
on the display.
LIGHT M (Music)
CLASSICS
• For details, see “Description of the PTY codes” on page 51.
CHILDREN
FINANCE
3 Press ENTER, while the PTY
OTHER M (Music)
code selected in the previous
WEATHER
ENTER
step is still on the display.
The system searches FM preset stations,
stops when it finds the one you have
selected, “FOUND” appears on the
display and tunes in that station.
• If no program is found, “NOT FOUND” appears on the
display.
To stop during searching
Press PTY SEARCH again.
“SEARCH OFF” appears on the display.
PTY SEARCH
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Switching to a Selected Program
STANDBY/ON
You can locate a particular kind of program from an FM RDS
station.
SOUND
AUDIO
TV
VCR
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
From the remote control ONLY:
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
0
DVD
FM/AM
AUX
RDS
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
TVVOL
NEWS/INFO
1 Press NEWS/INFO.
AUDIOVOL
• Each time you press the button, the display
changes to show the following.
TOP
MENU
PTY
MENU
NEWS/INFO
NEWS/INFO
ENTER
INFO
NEWS
PTY
ENTER
Off (Normal indication)
PTY SEARCH
CHOICE
ON SCREEN
NEWS: News.
DOWN -TUNING - UP
SLOW
INFO: Program the purpose of which is to impart advice in the
AUDIO SUBTITLE ANGLE ZOOM
widest sense.
RETURN DIMMER DSP
SLEEP
SURROUND
Off:
The search function is canceled.
RM-STHA35R
DVD CINEMA SYSTEM
2 Press ENTER
The system searches FM stations, stops
when it finds the one you have selected,
“FOUND” appears on the display and
tunes in that station.
ENTER
• If no program is found, “NOT
FOUND” appears on the display.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
I Description of the PTY codes:
NEWS:
News.
FINANCE: Stock Market reports, commerce, trading etc.
CHILDREN: Programs targeted at a young audience.
AFFAIRS:
Topical program expanding or enlarging upon the
news—debate, or analysis.
SOCIAL:
Programs about sociology, history, geography,
psychology and society.
INFO:
Programs the purpose of which is to impart advice in
the widest sense.
RELIGION: Religious programs.
SPORT:
Programs concerned with any aspect of sports.
PHONE IN: Involving members of the public expressing their
EDUCATE: Educational programs.
DRAMA: All radio plays and serials.
views either by phone or at a public forum.
TRAVEL:
LEISURE:
JAZZ:
Travel information.
CULTURE: Programs concerning any aspect of national or
Programs about recreational activities.
Jazz music.
regional culture, including language, theater, etc.
SCIENCE:
VARIED:
Programs about natural sciences and technology.
COUNTRY: Songs which originate from, or continue the musical
Used for mainly speech-based programs such as
quizzes, panel games and personality interviews.
tradition of the American Southern States.
NATION M: Current popular music of the nation or region in that
POP M:
Commercial music of current popular appeal.
Rock music.
country’s language.
ROCK M:
EASY M:
OLDIES:
FOLK M:
Music from the so-called “golden age” of popular
music.
Current contemporary music considered to be “easy-
listening.”
Music which has its roots in the musical culture of a
particular nation.
LIGHT M:
Instrumental music, and vocal or choral works.
DOCUMENT: Programs concerning factual matters, presented in an
CLASSICS: Performances of major orchestral works,
investigative style.
symphonies, chamber music, etc.
TEST:
Broadcasts for testing emergency broadcast
equipment or unit.
OTHER M: Music not fitting into any of the other categories.
WEATHER: Weather reports and forecasts.
ALARM:
Emergency announcement.
Classification of the PTY codes for some FM stations
may be different from the above list.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the DVD Preferences
Using the Choice Menus
STANDBY/ON
AUDIO
You can adjust the initial setting of DVD playback according to your
preference or needs through five choice menus.
• You need to turn on your TV and select the correct input mode on
the TV.
• You can select the choice menu only when DVD is selected as the
source and playback stops.
• You can only use the remote control for the choice menu operations.
• You can change the language used in the choice menus. See page
53.
SOUND
TV
VCR
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
0
DVD
FM/AM
AUX
RDS
CONTROL
TV
TV/VIDEO SEARCH
MUTING REC/MEMORY
VCR
TVVOL
Language Picture Audio Setting
Rating
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
PTY
ENTER
CHOICE
PTY SEARCH
CHOICE
ON SCREEN
DOWN -TUNING - UP
SLOW
Language: You can select the initial languages for the disc
menu, audio, and subtitle.
AUDIO SUBTITLE ANGLE ZOOM
You can also select the language used on the TV
screen while operating this system.
RETURN DIMMER DSP
SLEEP
SURROUND
Picture:
You can select the desired options concerning a
picture or monitor screen.
RM-STHA35R
Audio:
The Audio menu is not used for this system.
DVD CINEMA SYSTEM
Setting:
You can make the speaker settings according to the
layout of your speakers.
Rating:
You can change the setting the parental lock.
See “Setting the Parental (Rating) Level” on page
57.
Basic procedure through the choice menus
1 Press CHOICE.
The choice menu appears on the TV.
Language Picture Audio Setting
Rating
CHOICE
2 Press cursor 3/2 repeatedly to
select one of the choice
menus—Language, Picture,
Audio, Setting, or Rating.
ENTER
52
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press ENTER
Language Menu
The selected menu appears on the TV.
You can select your favorite language you listen to or read on the TV
screen.
Language Picture Audio Setting
Rating
ENTER
When you operate this system or watch a DVD, you will be able to
operate the system or to enjoy a DVD in the language you have
selected and stored.
Dynamic Range
C.Delay
S.Delay
Off
0 ms
0 ms
Speaker Set LR C LS RS SW
On the Language menu, you can select the following:
Test Tone
Language Picture Audio Setting
Rating
Example: When the Setting menu is selected.
On Screen
Subtitle
Audio
DVD Menu
English
4 Press cursor 5/∞ repeatedly to
select the item you want to set
up.
English
English
English
ENTER
Restore default
On Screen:
Select the indication language shown on the
TV screen while operating the system. (ex.
PLAY, STOP, PAUSE, etc.)
5 Press ENTER
• Each time you press the button, the
setting of the item changes.
Subtitle:
Audio:
Select the subtitle language you read while
watching a DVD.
ENTER
Select the language you listen to while
watching a DVD.
Language Picture Audio Setting
Rating
DVD Menu:
Select the menu language recorded on a DVD
which you use while operating the DVD’s own
menu.
Dynamic Range
C.Delay
S.Delay
Off
2 ms
0 ms
Speaker Set LR C LS RS SW
Restore default: All choice menu settings (except for
“Interlace” setting in the Picture menu, Rating
level and the password in the Rating menu)
return to initial setting.
Test Tone
Example: When the C.Delay is selected.
If you select this item and press ENTER,
“System Reset” appears on the TV.
To reset the settings, select “OK” and press
ENTER. All choice menu settings return to
initial setting, the choice menu disappears and
the disc is loaded again.
Notes:
• Some choice menus consist of two pages. Selecting “Next Page”
and pressing ENTER makes its next menu appear on the TV.
• Some items in the choice menus consist of sub-menus to set up.
Selecting them and pressing ENTER makes its sub-menu appear
on the TV.You can set them using cursor 5/∞ and ENTER (as
explained in this basic procedure).
To return from the sub-menu, cursor 2.
Languages you can select on this menu
You can select the following languages separately for each listed
item on the menu.
To move to another choice menu
Press cursor 5 when the top of the items in the menu is selected.
• For “On screen,”“Audio,” and “DVD Menu”:
English, French, and German.
• For “Subtitle” :
English, French, German, Auto and Off.
Note:
The original language will be selected as the initial language
regardless of your setting in the following cases:
• If the language you have selected is not recorded on the disc.
• If the disc is programmed to be played back in the original
language.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the DVD Preferences
Monitor Type: Select the TV screen size for playing back a
DVD recorded with 16:9 wide screen video
signal.
STANDBY/ON
SOUND
AUDIO
TV
VCR
• 4:3 Letter Box: Select “4:3 Letter Box” when
the aspect ratio of your TV is
CENTER
SUBWOOFER
1
2
3
4
4:3. While viewing a wide
REAR-L
REAR-R
5
TEST
9
6
7
8
screen picture, the black bars
appear on the top and the bottom of the
screen.
CLEAR SETTINGFM MODE
0
DVD
FM/AM
AUX
RDS
• 4:3 Pan-Scan: Select “4:3 Pan-Scan” when
the aspect ratio of your TV is
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV
VCR
4:3. While viewing a wide
TVVOL
screen picture, the black bars
AUDIOVOL
do not appear, however, the left and right
edge sides of the pictures will not be shown
on the screen.
Select “16:9 Wide” when
the aspect ratio of the TV
is 16:9. (Set the screen
size to full on your TV.)
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
• 16:9 Wide:
PTY
ENTER
CHOICE
PTY SEARCH
CHOICE
ON SCREEN
TV System:
Interlace:
You cannot select this item.
DOWN -TUNING - UP
SLOW
Select the video signal type.
• CVBS S_Video: Select this when you use the S-Video cord to
AUDIO SUBTITLE ANGLE ZOOM
connect a TV.
• CVBS RGB:
Select this when you do not use the S-Video
cord to connect a TV.
RETURN DIMMER DSP
SLEEP
SURROUND
TE Mode:
• On:
You can select the TE (Transition Effect) mode.
When the picture changes and appears on the
TV, the picture appears with transition effect.
The picture appears without effect.
RM-STHA35R
DVD CINEMA SYSTEM
• Off:
Pause/Still:
You can change this mode to get better pictures
when the picture is unclear or noisy.
Normally select “AUTO.” If the picture on a disc
is unclear or noisy, select “Frame” or “Field.”
Select this when the small text or fine
Picture Menu
• Frame:
patterns cannot be seen clearly.
You can select the desired options concerning a picture or monitor
screen.
• Field:
• Auto:
Select this when the moving picture is noisy.
Normally select this mode. The system
selects the appropriate mode automatically.
On the Picture menu, you can set the following:
Language Picture Audio Setting
Rating
Monitor type
TV system
Interlace
4:3Letter Box
PAL
CVBS RGB
Next page
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Menu
Audio Menu
You can make the speaker settings according to the size and layout
of your speakers.
The Audio menu is not used for this system.
On the Setting menu, you can set the following:
Language Picture Audio Setting
Rating
Language Picture Audio Setting
Rating
D Digital
DTS
MP3
CD
Off
Dynamic Range
C.Delay
S.Delay
Off
Off
Off
Off
0 ms
0 ms
Speaker Set LR C LS RS SW
Next Page
Test Tone
D Digital / DTS / MP3 / CD / PCM / DownSampling :
• Off
Dynamic Range:You can enjoy a powerful sound at night even at
a low volume level when listening to the sound
with Dolby Digital.
• On:
Select this when you want to apply the
compression effect fully (useful at midnight.)
Select this when you want to enjoy surround
with its full dynamic range (no effect
applied.)
• Off:
C.Delay:
R.Delay:
To register delay time for center speaker—from
0 msec to 5 msec. See “Setting the delay time”
on the next page.
To register delay time for rear speakers—from 0
msec to 15 msec. See “Setting the delay time”
on the next page.
Speaker Set:
Test Tone:
Enters Speaker setting sub-menu. See “Speaker
setting” on the next page.
The test tone menu appears on the TV and the
test tone comes out from the speakers in the
order. See “Adjusting the Sound” on page 21.
• If a disc is not loaded, the test tone does not
come out.
• If there is a speaker from which no sounds
comes out, check the speaker’s connection (see
pages 6 and 7.)
TO BE CONTINUED ON THE NEXT PAGE
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the DVD Preferences
7 Setting the delay time
Adjust the delay time of the sounds from the center speaker and the
rear speakers, comparing to that of the sounds from the front
speakers. If the distance to the center speaker and/or the rear
speakers from your listening point is almost the same as from the
front speakers, select “0 ms (msec).”
STANDBY/ON
SOUND
AUDIO
TV
VCR
Number
buttons
CENTER
SUBWOOFER
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTINGFM MODE
0
DVD
FM/AM
AUX
RDS
Center speaker
Subwoofer
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
Left front
speaker
Right front
speaker
TV
VCR
TVVOL
AUDIOVOL
3.0 m
2.7 m
2.4 m
2.1 m
TOP
MENU
MENU
PTY
NEWS/INFO
3/2/5/∞
ENTER
PTY
ENTER
CHOICE
PTY SEARCH
CHOICE
ON SCREEN
Left rear
speaker
Right rear
speaker
DOWN -TUNING - UP
SLOW
AUDIO SUBTITLE ANGLE ZOOM
RETURN DIMMER DSP
SLEEP
SURROUND
1 msec increase in delay time corresponds to 30 cm
increase in distance.
RM-STHA35R
DVD CINEMA SYSTEM
Ex.: In this case, set C.Delay to “1 ms” and R.Delay to
“3 ms”
7 Speaker setting
Language Picture Audio Setting
Rating
Subwoofer
Surround
Center
On
Small
Small
Small
Front Speaker
Return
Subwoofer:
Surround / Center / Front Speaker:
Select the speaker setting according to the layout
You cannot select this item.
of your speakers. (You cannot select “Off” for
the front speakers.)
• Small:
• Off:
Select this when the cone speaker unit built in
the speaker is smaller than 12 cm. (Select this
when using the supplied speakers. )
Select this when the center speaker and/or
rear speakers are not connected or not in use.
If you want to enjoy monaural source with
the front speakers, select “Off” for the center
speaker.
Return:
Return to the Setting menu.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press cursor ∞ to select
Setting the Parental (Rating) Level
“Rating.”
Language Picture Audio Setting
Rating
ENTER
Using this function, you can restrict playback of DVD containing
violent scenes and those not suitable for your family members.
Nobody can play such a disc unless this function is canceled (See
“To release the parental lock temporarily” below.)
• This setting takes effect only for the DVDs containing the rating
level information—“1. Kid Safe” (most restrictive) to “8. Adult”
(least restrictive).
Password
Rating
––––
1. Kid Safe
• If you do not release the parental lock (“ ” appears on the
TV), cannot select “Rating.”
From the remote control ONLY:
1 Press CHOICE.
The choice menu appears on the TV.
6 Press ENTER repeatedly to
CHOICE
select the level you want.
• Each time you press the button, the
ENTER
2 Press cursor 3 repeatedly to
parental (rating) level changes.
select “Rating.”
ENTER
CENTER
SUBWOOFER
7 Press cursor 5 to select
“Password”, then press the
number buttons to enter the
password (4 digits) and
ENTER.
1
2
6
3
4
REAR-L
REAR-R
5
TEST
9
7
8
CLEAR SETTING
3 Press ENTER.
0
The Rating menu appears on the TV.
Language Picture Audio Setting
Rating
ENTER
“
” changes to “ ” on the menu,
and the parental level changes.
ENTER
Password
Rating
––––
1. Kid Safe
7 To change the password
CENTER
SUBWOOFER
CENTER
SUBWOOFER
1 Repeat steps 1 to 4 of “Setting
the Parental (Rating) Level”
procedure.
4 Press the number buttons to
enter the password (4 digits),
then ENTER.
1
2
6
3
4
1
2
6
3
4
REAR-L
REAR-R
REAR-L
REAR-R
5
7
8
5
TEST
9
7
8
TEST
CLEAR SETTING
CLEAR SETTING
9
0
0
“
” changes to “ ” on the menu.
2 Press the number buttons to
enter a new password (4 digits),
then ENTER.
• If you forget your password, enter
“1987”
ENTER
ENTER
“
” changes to “ ” on the menu.
Your new password is now stored.
Language Picture Audio Setting
Rating
Language Picture Audio Setting
Rating
Language Picture Audio Setting
Rating
Language Picture Audio Setting
Rating
Password
Rating
––––
1. Kid Safe
Password
Rating
Password
Rating
––––
1. Kid Safe
Password
Rating
****
****
1. Kid Safe
1. Kid Safe
7 To release the parental lock temporarily
When you set a strict parental level, some discs may not be played
back at all.
If you try to playback such a disc, you need to input the password to
release parental lock temporarily (“Password – – – –” and ”Parental
Locked” appear on the TV.)
enter the correct password.
You cannot play the disc before you
When you enter wrong passwords more than three times, “Parental
Lock” appears on the TV and playback stops.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating JVC’s Components
You can use the remote control to operate not only this unit but also other JVC products.
• Refer also to the manuals supplied for the other products.
– This remote control can operate a VCR whose remote control code is set to A code.
• To operate the other products, aim the remote control directly at the remote sensor on the target product.
❏ To operate a JVC’s TV
CONTROL
VCR
After pressing CONTROL TV on the
remote control, you can perform the
following operations on the TV.
TV
STANDBY/ON
SOUND
AUDIO
TV
VCR
TV
CENTER
SUBWOOFER
Number
buttons
TV
:
Turn on or off the TV.
Adjust the volume.
1
2
3
4
REAR-L
REAR-R
TV VOL +/–:
TV/VIDEO:
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
Set the input mode (either TV or
VIDEO).
0
DVD
FM/AM
AUX
RDS
CONTROL TV
TV VOL +/–
1 – 9, 0:
Select the channel.
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV/VIDEO
TV
VCR
1/ ¡:
Change the channels.
TVVOL
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
PTY
ENTER
PTY SEARCH
CHOICE
ON SCREEN
DOWN -TUNING - UP
SLOW
1/ ¡
AUDIO SUBTITLE ANGLE ZOOM
CONTROL
❏ To operate a JVC’s VCR
After pressing CONTROL VCR on the
remote control, you can perform the
following operations on the VCR.
TV
VCR
STANDBY/ON
AUDIO
SOUND
VCR
:
Turn on or off the VCR.
Change the channels.
TV
VCR
VCR
1/ ¡:
1 – 9, 0:
3:
CENTER
SUBWOOFER
Number
buttons
Select TV channel on the VCR.
Start playback.
1
2
3
4
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
7:
Stop operation.
0
8:
Pause playback. To release it,
DVD
FM/AM
AUX
RDS
press 3.
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
CONTROL VCR
TV
VCR
REC(¶):
Press this button with 3 to start
recording.
TVVOL
REC
Press this button and 8, to enter
recording pause. To release it,
Press 8.
AUDIOVOL
TOP
MENU
MENU
PTY
NEWS/INFO
¢:
4:
Fast-wind a tape.
Rewind a tape.
PTY
ENTER
3
IMPORTANT:
PTY SEARCH
CHOICE
ON SCREEN
8
7
When you press CONTROL TV or CONTROL VCR, some
buttons on the remote control cannot work for operating the
system.
DOWN -TUNING - UP
SLOW
4/ ¢
1/ ¡
AUDIO SUBTITLE ANGLE ZOOM
To operate the system, press DVD, FM/AM or AUX .
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ TV
❏ To change the transmittable signals for operating a
You can use the remote control to operate other
manufactures’TV.
• Refer also to the manuals supplied for the other products.
• To operate the other products, aim the remote control
directly at the remote sensor on the target product.
TV
1. Press CONTROL TV.
2. Press and hold TV
.
3. Enter manufacturer’s code using buttons 1–9, and 0.
4. Press 7.
5. Release TV
.
Now, you can perform the following operations on the TV.
STANDBY/ON
SOUND
AUDIO
TV
:
Turn on or off the TV.
Adjust the volume.
TV
VCR
TV
TV VOL +/–:
TV/VIDEO:
CENTER
SUBWOOFER
Number
buttons
1
2
3
4
Set the input mode (either TV or
VIDEO)
REAR-L
REAR-R
5
TEST
9
6
7
8
CLEAR SETTING FM MODE
1 – 9, 0:
Select the channel.
0
1/ ¡:
Change the channels.
DVD
FM/AM
AUX
RDS
CONTROL TV
CONTROL
TV/VIDEO SEARCH
MUTING REC/MEMORY
TV/VIDEO
TV
VCR
6. Try to operate your TV by pressing TV
.
TV VOL +/–
TVVOL
When your TV turns on or off, you have entered the correct
code.
AUDIOVOL
TOP
MENU
PTY
MENU
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
NEWS/INFO
PTY
ENTER
PTY SEARCH
CHOICE
ON SCREEN
Manufacturers’ codes for TV
7
DOWN -TUNING - UP
SLOW
Manufacturer
Codes
1/ ¡
JVC
01, 23, 24, 25
AUDIO SUBTITLE ANGLE ZOOM
FUNAI
GRUNDIG
HITACHI
32
19
10
RETURN DIMMER DSP
SLEEP
SURROUND
LG (GOLDSTAR) 18
RM-STHA35R
MAGNAVOX
MITSUBISHI
NEC
02
03
20
DVD CINEMA SYSTEM
NOKIA
31
PANASONIC
PHILIPS
RCA
04, 11
02
05
SAMSUNG
SANYO
SHARP
12, 33, 34, 35
13, 16
06
SONY
07
THOMSON
TOSHIBA
ZENITH
26
08, 14
09
Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs and
mechanism clean.
General Notes
Cleaning the unit
In general, you will have the best performance by keeping your
discs, and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on shelves.
• Keep the disc tray closed when not in use.
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily stained,
wipe it with a cloth soaked in water-diluted neutral detergent and
wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
Handling Discs
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substance such as insecticides to
it.
— DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
• Remove the disc from its case by
holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of
the disc, or bend the disc.
• Put the disc back in its case after
use to prevent warping.
• Be careful not to scratch the
surface of the disc when placing it
back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and
moisture.
To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.
DO NOT use any solvent—such as conventional record
cleaner, spray, thinner, or benzine—to clean the disc.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.
PROBLEM
Power does not come on.
The remote control does not work.
POSSIBLE CAUSE
SOLUTION
Insert the plug into the socket.
• Come close to the center unit.
The power cord is not plugged in.
• It is too far from the center unit, or is not
facing the center unit.
• There is something obstructing the remote
sensor.
• Avoid any obstacles.
• The CONTROL VCR or CONTROL TV • Press DVD, FM/AM or AUX to operate
button has been pressed.
• The battery is flat.
the system. (See page 58)
• Replace the battery.
• The battery has been inserted the wrong
way round (+/–).
• Insert the battery correctly.
• Sunlight is falling directly on the detector. • Shade the remote control from direct
sunlight.
No sound.
• There is a short in the speaker cord.
• The audio cord is not connected properly.
• An incorrect source has been selected.
• Reconnect the speaker cord.
• Connect the cord properly. (See page 8.)
• Select the correct source. (See pages 10 to
16.)
• Muting is on.
• The disc is copy–protected CD.
• Press MUTING to cancel muting.
• Replace the disc.
Sound is emitted from only one speaker.
No video.
• The speaker cord is not connected correctly. • Connect the cord properly. (See page 7.)
• The video cord is not connected properly.
• TV input selection is incorrect.
• Connect the cord properly. (See page 9.)
• Select the correct input.
A disc cannot be played.
• The system and disc region code numbers
are incompatible.
• Replace the disc. (See page 22.)
• The disc causes the parental (rating) error. • Enter password to change the parental
(rating) level. (See page 57.)
“Error” appears on the TV screen.
Video and audio are distorted.
• The CD-R/RW is not recorded in the audio • Replace the disc.
CD format, MP3 format, or JPEG format.
• The disc is dirty.
• Clean the disc.
• A VCR is connected between the center unit • Connect the center unit and TV directly.
and the TV.
The moving picture is noisy.
• “Pause/Still” mode may not be set
appropriately for the current disc.
• Select “Field” on “Pause/Still” mode.
(See page 54.)
The edge is missing on the video image.
Continuous static during FM broadcasts.
• Initial setup (Monitor Type) was incorrect. • Set Monitor Type correctly.
(See page 54.)
• The received signal is too weak.
• Connect an external FM antenna (see page 5),
or contact your dealer.
• The station is too far away.
• Select another station.
• The antenna is not connected correctly.
• Check the connection. (See page 5.)
The system does not work correctly.
• Lightning or electronic noise interferes with • Switch power off, and remove and re-insert
operation of the microcomputer.
the power plug in the socket.
• Immediately after beginning to heat the
room, the unit was moved to a cold location
causing condensation to form inside.
• Switch power off and leave the unit a few
hours before switching power on again.
The VCR cannot be operated using this
remote control.
• The remote control is not set for VCR
operations.
• Press CONTROL VCR to operate the VCR.
(See page 58.)
• The VCR is not a JVC’s product.
• This remote control can operate a JVC’s
VCR whose remote control code is set to A
code.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Center unit (XV-THA35)
Subwoofer (SP-WA35)
Amplifier section
Speaker:
16 cm
Bass-reflex, Magnetically Shielded
Front/Center/Rear:
45 watts per channel, min. RMS at 6 ohms as 1 kHz,
with no more than 10 % total harmonic distortion.
Power Handling Capacity: 100 W
Impedance:
10 Ω (min)
25 Hz to 200 Hz
Subwoofer:
Frequency Range:
100 watts, min. RMS at 10 ohms as 100 Hz,
with no more than 10 % total harmonic distortion.
Dimensions (W × H × D): 202 mm × 330 mm × 341 mm
Mass: 4.8 kg
Audio section
Satellite Speakers (SP-THA35F)
Audio input sensitivity/Impedance (at 1 kHz)
Speakers:
8 cm
Analog input:
Bass-reflex, Magnetically Shielded
AUX (“AUX IN”): 500 mV/47 kΩ
Power Handling Capacity: 45 W
Digital input*:
Impedance:
6 Ω (min)
90 Hz to 20 kHz
DIGITAL IN (OPTICAL):
–21 dBm to –15 dBm (660 nm 30 nm)
Frequency Range:
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz,
44.1 kHz, 48 kHz)
Dimensions (W × H × D): 92 mm × 97.5 mm × 92 mm
Mass: 650 g
Designs & specifications are subject to change without notice.
Video section
Color System:
PAL
Horizontal Resolution: 480 lines
Signal-to-Noise Ratio: 68 dB
Output Level
VIDEO(Composite): 1.0 V(p-p)/75 Ω
S-VIDEO(Y): 1.0 V(p-p)/75 Ω
(C): 0.286 V(p-p)/75 Ω
Tuner section
Tuning Range
FM: 87.50 MHz – 108.00 MHz
AM(MW): 522 kHz – 1 629 kHz
General
Readable Discs:
DVD VIDEO, Video CD,
Super Video CD, Audio CD,
CD–R/RW (Audio CD, Video CD,
Super Video CD, MP3 disc, and
JPEG disc), DVD–R (Video format)
Power Requirements:
Power Consumption:
AC 230 V , 50 Hz
180 W (at operation)
2 W (in standby mode)
Dimensions (W × H × D): 360 mm × 65 mm × 360 mm
Mass:
6.6 kg
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN
J
C
0103TMMMDWBET
V
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|