DVD DIGITAL CINEMA SYSTEM
TH-S1
Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S
,
,
XV-THS1 SP-WS1 SP-THS1F SP-THS1S
INSTRUCTIONS
GVT0141-003A
[US/UN/UB]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are
shown below:
Wall or obstructions
Wall or
obstructions
8 cm
Front
XV-THS1
XV-THS1
3 cm
3 cm
10 cm
No
obstructions
15 cm
Front view
Side view
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Introduction .....................................2
Notes on handling .................................................................2
Supplied accessories ............................................................2
Playback ........................................16
Basic playback ....................................................................16
One Touch Replay ...............................................................18
Fast-forward/fast-reverse search ........................................18
Skip to the beginning of a desired selection .......................18
Locating a desired title/group using number buttons .........19
About discs .....................................3
Playable disc types ...............................................................3
Index of parts and controls ............5
Advanced operations ....................20
Using the surround mode ...................................................20
Using the on-screen bar .....................................................21
Playing from a specified position on a disc .........................23
Using the file control display ..............................................24
Resume Playback ...............................................................25
Selecting a view angle .........................................................25
Selecting the subtitle ..........................................................26
Selecting the audio .............................................................26
Special picture playback .....................................................27
Program Playback ...............................................................28
Random Playback ...............................................................28
Repeat Playback .................................................................29
Tray lock .............................................................................30
Sound and other settings ....................................................30
Connections ....................................7
Connecting the FM and AM antennas ....................................7
Connecting the satellite (front, center, surround) speakers and
the subwoofer ......................................................................... 8
Speaker layout ......................................................................9
Connecting a TV ....................................................................9
Connecting to an analog component ...................................10
Connecting to a digital component .....................................10
Connecting the power cord .................................................10
Operating external components with
the remote control ........................11
Operating the TV .................................................................11
Operating the VCR ..............................................................12
Setting DVD preferences ..............31
Using the setup menus .......................................................31
Menu description ................................................................31
Basic operations ...........................13
Turning the system on/off ...................................................13
Selecting the source to play ................................................14
Adjusting the volume [VOLUME] ........................................14
Listening with headphones (not supplied) ..........................14
Turning off the sound temporarily [MUTING] .....................14
Adjusting the brightness of the indications [DIMMER] .......14
Sleep Timer [SLEEP] ...........................................................15
Adjusting the output level of the subwoofer and center/
Tuner operations ...........................35
Setting the AM tuner interval spacing .................................35
Manual tuning .....................................................................35
Preset tuning ......................................................................36
Selecting the FM reception mode ........................................36
surround speakers [S.WFR, CENTER, L-SURR.-R] .............15
Adjusting the treble sound [TREBLE] ..................................15
Changing the scan mode ....................................................15
AV COMPU LINK remote control
system ...........................................37
References ....................................38
Maintenance .......................................................................38
Troubleshooting ..................................................................38
Specifications .....................................................................39
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
7 Safety precautions
Notes on handling
7 Important cautions
Avoid moisture, water and dust
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not place it near
a heating device.
Installation of the system
• Select a place which is level, dry and neither too hot nor too cold;
between 5°C and 35°C.
When you are away
When away on travel or for other reasons for an extended period of
time, disconnect the power cord plug from the wall outlet.
• Leave sufficient distance between the system and the TV.
• Do not use the system in a place subject to vibration.
Power cord
Do not block the vents
Blocking the vents may damage the system.
• Do not handle the power cord with wet hands!
• A small amount of power is always consumed while the power
cord is connected to the wall outlet.
• When unplugging the power cord from the wall outlet, always
pull on the plug, not the power cord.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents including disinfectants.
These may cause deformation or discoloring.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart, flower or
credit card, etc.) available on the market, because it may damage
the system.
If water gets inside the system
Turn the system off and disconnect the power cord plug from the
wall outlet, then call the store where you made your purchase.
Using the system in this condition may cause fire or electrical
shock.
• Do not use a disc with tape, stickers, or paste on it, because it
may damage the system.
Label sticker
Supplied accessories
Check to be sure you have all of the supplied accessories.
The number in parentheses is the quantity of the pieces supplied.
If anything is missing, contact your dealer immediately.
Sticker
Paste
• Remote control (1)
• Batteries (2)
• FM antenna (1)
Note about copyright laws
• AM loop antenna (1)
• Composite video cord (1)
• AC plug adaptor (except for Hong Kong) (1)
Check the copyright laws in your country before recording from the
discs. Recording of copyrighted material may infringe copyright
laws.
Note about copyguard system
The discs are protected by copyguard system. When you connect
the system to your VCR directly, the copyguard system activates
and the picture may not be played back correctly.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Region code of DVD VIDEO
DVD VIDEO players and DVD VIDEO discs have their own
Region Code numbers. This system can play back DVD VIDEO
discs whose Region Code numbers include the system’s Region
Code, which is indicated on the rear panel.
Playable disc types
This system has been designed to play back the following discs:
DVD VIDEO, Video CD (VCD), Super Video CD (SVCD), Audio
CD (CD), CD-R and CD-RW.
Example of playable DVD:
• This system accommodates the NTSC and PAL system. Note that
an NTSC video signal on a disc is converted to the PAL60 signal
and output when the scanning mode (see page 15) is set to“PAL”.
• This system can also play finalized DVD-R/-RWs recorded in
DVD VIDEO format. However, some discs may not be played
because of their disc characteristics or recording conditions.
If a DVD with an improper Region Code number is loaded,
“REGION CODE ERROR!” appears on the TV screen and
playback cannot start.
Discs you can play:
DVD VIDEO
Audio CD
CD-R
About files (tracks) and folders (groups) on the disc
This system can also play MP3 and JPEG files recorded on CD-Rs
and CD-RWs.
Files are sometimes grouped into folders on CD-Rs or CD-RWs by
genre, album, etc.
In this manual, “group” is also referred to as “folder”, and “track”
VCD
as “file”.
• This system recognizes up to 150 files per group, and 99 groups
per disc.
The total number of files this system can detect on a disc is up to
1000.
SVCD
CD-RW
• The following discs cannot be played back:
DVD AUDIO, DVD-ROM, DVD-RAM, CD-ROM, CD-I (CD-I
Ready), Photo CD, SACD, etc.
Playing back these discs will generate noise and damage the
speakers.
• On some DVD VIDEOs, VCDs or SVCDs, their actual
operation may be different from what is explained in this
manual. This is due to the disc programming and disc
structure, not a malfunction of this system.
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Notes on CD-R and CD-RW
Notes on MP3 files
• User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can
be played back only if they are already “finalized”.
• When making your own disc, select ISO 9660 Level 1 or Level 2
for the disc format.
• This system supports “multi-session” discs (up to 20 sessions).
• This system cannot play “packet write” discs.
• Before playing CD-Rs or CD-RWs, read their instructions or
cautions carefully.
• CD-RWs may require a longer readout time. This is caused by
the fact that the reflectance of CD-RWs is lower than that of
regular CDs.
• Some discs may not be played due to their disc characteristics,
recording conditions, or damage or stain on them.
• This system can play CD-Rs or CD-RWs recorded in the audio
CD format.
• Tag information (album name, artist name, and track name) can
be shown on the TV. (See page 24.)
• The system can play back the MP3 files recorded at 32 kbps to
320 kbps as a bit rate, and at 16 kHz, 22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, 48 kHz as a sampling frequency.
• We recommend to record each piece of material (song) at a
sample rate of 44.1 kHz and at a data transfer rate of 128 kbps.
Notes on JPEG files
• We recommend to record a file at 640 x 480 resolution. (If a file
has been recorded at a resolution of more than 640 x 480, it will
take a longer time to be displayed.)
• This system can only play baseline JPEG files.
This system can also play CD-Rs or CD-RWs if MP3 or JPEG
files are recorded on them.
Especially, the configuration and characteristics of an MP3/JPEG
disc are determined by the writing (encoding) software and
hardware used for recording. Therefore, due to the software and
hardware used, the following symptoms may occur:
•
Some tracks/files on an MP3/JPEG disc may be skipped or may
not be played normally.
•
Some files on a JPEG disc may be played distortedly.
Notes on MP3/JPEG discs
• MP3/JPEG discs (either CD-R or CD-RW) require a longer
readout time. (It differs due to the complexity of the directory/file
configuration.)
• The system can only recognize files with one of the following
extensions, which can be in any combination of upper and lower
case:
MP3:
“.MP3”, “.mp3”
JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”
• If different kinds of the file are mixed on a disc, set the FILE
TYPE setting in the PICTURE menu to the appropriate setting
for the data to be read (“AUDIO” or “STILL PICTURE”). (See
page 32.)
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index of parts and controls
The numbers in the figures indicate the pages where the details of the parts are described.
Front panel (center unit)
Display window
21
36
17
21
15
17 17 17
17 17
35 35
36
29
Disc tray (inside): 16
16
13
16
16
18 14
14
14
18
13
16
Remote sensor: 6
Rear panel (center unit)
See below (except for Hong Kong).
37
9
9
7
10
8
10
10
Setting the VOLTAGE SELECTOR (except for Hong Kong)
Before plugging, set the correct voltage for your area with the
voltage selector on the rear panel of the center unit.
Use a screwdriver to rotate the voltage selector so that the voltage
number the voltage mark is pointing at is the same as the voltage
where you are plugging in the center unit.
Voltage mark
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Index of parts and controls
Remote control
Putting batteries in the remote control
13
11
12
16
11
14
R6P (SUM-3)/AA (15F)
type dry-cell batteries
(supplied)
14
17
26
26
21
14
11
11
11 – 36
16
18, 35
18
16, 36
23
23
16, 36
If the range or effectiveness of the remote control decreases,
replace both batteries.
15, 31
21
CAUTION
• Do not expose batteries to heat or flame.
12, 18
19
25
Operating the system from the remote
control
Aim the remote control directly to the front panel of the center unit.
• Do not hide the remote sensor.
Number
27
buttons: 18
28
29
29
31
30
28
23
15, 27
14
15
15
15
15
15
NOTE
• To use the buttons
under the cover, slide
down the cover.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
If reception is poor
Connecting the FM and
AM antennas
Center unit
AM loop antenna
7 AM loop antenna
Setting up supplied AM loop antenna
Outdoor single vinyl-covered wire
antenna (not supplied)
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
7 FM antenna
FM antenna (supplied)
Center unit
Connecting AM loop antenna
Extend the supplied FM antenna
horizontally.
1
2
3
If reception is poor
Center unit
Outdoor FM antenna
(not supplied)
Standard type (75 C
coaxial) connector
Outdoor FM antenna cord
(not supplied)
Antenna cord
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords and power cords. This could cause poor reception.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting the satellite (front, center, surround)
speakers and the subwoofer
Front speakers
Center speaker
Speaker cord
• Connect the black cords to the black (-) terminals.
• Connect the white cords to the red (+) terminals.
Before connecting
the speaker cords;
Twist and pull the
insulation coat off
and remove.
Subwoofer
Surround speakers
• When installing the satellite speakers on the wall;
CAUTION
•
Be sure to have them installed on the wall by a qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated on the rear of the center unit.
• DO NOT connect more than one speaker to one speaker terminal.
•
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Speaker layout
Connecting a TV
• Distortion of picture may occur when connecting the TV via a
VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu
correctly according to the aspect ratio of your TV. (See page 32.)
Center speaker
Front left
speaker
Front right
speaker
Subwoofer
7 To connect a TV equipped with the component video
input jacks
Center unit
TV
To component
video input
Surround left
speaker
Surround right
speaker
Component video cord (not supplied)
NOTE
NOTE
• Although the satellite speakers and the subwoofer are magnetically
shielded, the TV screen may appear mottled. In this case, keep
enough distance between the speakers and the TV.
• The speakers are magnetically shielded to avoid color distortions on
TVs. However, if not installed properly, it may cause color
distortions. So, pay attention to the following when installing the
speakers.
• If your TV supports progressive video input, you can enjoy a high
quality picture by setting the progressive scan mode to active. (See
page 15.)
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.
• The component video signals can be output only when you select
“DVD” as the source to play. (See page 14.)
- When placing the speakers near a TV set, turn off the TV’s
main power switch or unplug it before installing the speakers.
Then wait at least 30 minutes before turning on the TV’s main
power switch again.
7 To connect a TV equipped with the S-VIDEO and/or
the composite video input jacks
Some TVs may still be affected even though you have followed
the above. If this happens, move the speakers away from the TV.
• Place the satellite speakers on a flat and level surface.
• Be sure to place the subwoofer to the TV’s right. If you place the
subwoofer to the TV’s left, keep sufficient distance between them to
prevent the TV screen from appearing mottled.
Center unit
Composite video cord
(supplied)
TV
S-VIDEO cord (not supplied)
NOTE
• Select the appropriate scan mode according to your TV. (See page
15.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting to an analog
component
Connecting to a digital
component
You can enjoy the sound of an analog component.
You can enjoy the sound of a digital component.
Center unit
Center unit
DBS* tuner
MD recorder
To digital optical
output
RCA pin plug cord
(not supplied)
Digital optical cord
(not supplied)
* DBS = Direct Broadcasting Satellite
To audio output
NOTE
When playing a video component such as a DBS tuner;
• To listen to the sound, select “AUX DIGITAL” as the source to play.
(See page 14.)
• To see the picture, connect the video output jack of the component to
the video input jack of the TV directly, and select the correct input
mode on the TV.
VCR
TV
Cassette recorder
NOTE
• If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this system, the sound output
through this system may be distorted.
Connecting the power
cord
• When playing a video component such as a VCR;
•
To listen to the sound, select “AUX” as the source to play. (See
page 14.)
Make sure that all other connections have been completed.
•
To see the picture, connect the video output jack of the component
to the video input jack of the TV directly, and select the correct
input mode on the TV.
Center unit
Power cord
Plug into AC outlets.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
NOTE
• Preset settings, such as preset stations and surround mode adjustment,
may be erased in a few days in the following cases;
•
If you unplug the power cord of the center unit.
If a power failure occurs.
•
• If the wall outlet does not match the AC plug, use the supplied AC
plug adaptor (except for Hong Kong).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating external components with the remote control
4 Press number buttons (1-9, 0) to enter
The buttons described below are used on pages 11 and
12.
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV:
Press 1, then 0.
For a Toshiba TV:
Press 0, then 8.
Manufacturer
JVC
Code
01
Manufacturer
Samsung
Sanyo
Code
12
Hitachi
10
13
Magnavox
Mitsubishi
Panasonic
RCA
02
Sharp
06
03
Sony
07
Remote control
mode selector
04, 11
05
Toshiba
Zenith
08
09
(play button)
5 Release
TV.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
7 Operation
Aim the remote control at the TV.
IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
Number
buttons
The following buttons are available:
TV:Turns TV on and off.
TV VOL +/–:Adjusts the volume.
TV/VIDEO:Selects the input mode (either TV or VIDEO).
CHANNEL +/–:Changes the channels.
1-10, 0, +10 (100+):Selects the channel.
TV RETURN:Alternates between the previously selected channel
and the current channel.
NOTE
• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.
Operating the TV
7 To set the manufacturer’s code
You can operate a JVC TV without setting the manufacturer’s code.
1 Slide the remote control mode selector
to TV.
2 Press and hold
TV.
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 11 for button locations.
Operating external components with the remote control
7 Operation
Operating the VCR
7 To set the manufacturer’s code
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a VCR;
Set the remote control mode selector to VCR.
1 Slide the remote control mode selector
The following buttons are available:
VCR:Turns VCR on and off.
3 (play button):Starts playback.
7:Stops operation.
8:Pauses playback.
¡:Fast forwards video tape.
1:Rewinds video tape.
REC:Press this button together with 3 (play button) to start
recording or together with 8 to pause recording.
CHANNEL +/–:Changes the TV channels on the VCR.
to VCR.
VCR
2 Press and hold
VCR.
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.
4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Panasonic VCR:
Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
Manufacturer
JVC
Code
01, 02, 03
11, 26
29
Manufacturer
Philips
Code
09
Emerson
Fisher
RCA
05, 06
24
Samsung
Sanyo
Funai
10, 14-16
12
21-23
27, 28
30
Gold Star
Hitachi
Sharp
04
Shintom
Sony
Mitsubishi
NEC
13
18-20
08
25
Zenith
Panasonic
07, 17
5 Release
VCR.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
Turning the system on/off
On the remote control:
Press
AUDIO.
IMPORTANT
Before using the remote control for the following
operation,
On the center unit:
Press
.
AUDIO
• Set the remote control mode selector to AUDIO.
When DVD is selected as the source (see page 14), the following
messages will appear on the TV screen.
The buttons described below are used on
pages 13 to 15.
• “OPEN”/“CLOSE”:
Appears when opening or closing the disc tray.
• “NOW READING”:
Source
selecting
buttons
Appears when the system is reading the disc information.
• “REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
Remote control
mode selector
• “NO DISC”:
Appears when no disc is loaded.
• “CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
NOTE
• The STANDBY lamp goes off when the power is turned on, and the
lamp lights when the power is turned off.
• A small amount of the power is consumed even when the power is
turned off. This is called standby mode and the STANDBY lamp
lights in this mode. Unplug the power cord from the AC outlet to turn
the power off completely.
• You can also turn on the system by pressing the following buttons;
•
•
•
OPEN/CLOSE on the remote control or 0 on the center unit
One of the source selecting buttons on the remote control
3 on the center unit. You can use the same buttons on the remote
control except after pressing FM/AM.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 13 for button locations.
Basic operations
Selecting the source to
play
Listening with headphones
(not supplied)
On the remote control:
CAUTION
Be sure to turn down the volume;
Press one of the source selecting buttons
(DVD, FM/AM, AUX or AUX DIGITAL).
• Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
• Before disconnecting headphones as high volume may be suddenly
output from the speakers.
DVD:
To play back a disc (DVD VIDEO, VCD etc.). (See
page 16.)
FM/AM:
To tune in an FM or AM station. (See page 35.)
Each time you press the button, the band alternates
between FM and AM.
While connecting a pair of headphones to the PHONES jack on the
center unit, the system automatically cancels the surround mode
(see page 20) currently selected, deactivates the speakers, and
activates the headphone mode. “HEADPHONE” appears on the
display window.
AUX:
To select the source from a component connected to
the AUX IN jacks. (See page 10.)
AUX DIGITAL:To select the source from a component connected to
the DIGITAL IN jack. (See page 10.)
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are
output from the headphones.
• Multi-channel signals are down-mixed and output from the
headphones.
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
NOTE
• When a source except DVD is selected, this system does not output
video signals.
• It may take time to change the source.
Turning off the sound
temporarily [MUTING]
Press MUTING.
Adjusting the volume
[VOLUME]
To restore the sound
Perform one on the following:
• Press MUTING again.
• Press AUDIO VOL +/– (or turn VOLUME on the center unit).
CAUTION
• Always set the volume to minimum level before starting any source.
If the volume is set at its high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
Adjusting the brightness
of the indications
[DIMMER]
Press DIMMER.
Each time you press the button, the brightness level changes.
On the remote control:
Press AUDIO VOL + or –.
On the center unit:
Turn VOLUME.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 13 for button locations.
Basic operations
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Changing the scan mode
The system can be accommodated to your TV’s scan mode.
• To use the system in progressive mode, it is required that the
center unit is connected to the TV using a component video cord
(not supplied) in advance. (See page 9.)
Press SLEEP.
Each time you press the button, the shut-off time changes.
7 While DVD is selected as the source and before playback
Example:
1 Press and hold SCAN MODE for
minutes
2 seconds.
2 TPhreecsursrenCt suetrtisnog arp3pea/r2s ontothesdeislpelacytwtinhdeowd. esired
S L E E P 6 0m i n
mode.
To check the remaining time
Press SLEEP once.
• PAL:
Select when your TV supports the PAL
interlaced video input only.
• NTSC:
Select when your TV supports the NTSC
interlaced video input only.
To change the remaining time
Press SLEEP repeatedly.
• NTSC PROG.: Select when your TV equipped with
component jacks supports the NTSC
To cancel
Press SLEEP repeatedly until “SLEEP OFF” appears.
• Turning off the power also cancels the Sleep Timer.
progressive video input.
You can get better picture quality in “NTSC PROG.” mode
3 tPharneisns“PAELN” TorE“NRTSwCh” mileodet.he selected mode
Adjusting the output level
of the subwoofer and
center/surround speakers
[S.WFR, CENTER,
is shown on the display window.
When “NTSC PROG.” is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
L-SURR.-R]
Press S.WFR +/– to adjust the subwoofer.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to “PAL” or “NTSC.”
To check the compatibility of your TV, contact your local JVC
customer service center.
Press CENTER +/– to adjust the center
speaker.
Press SURR.-L +/– to adjust the surround
left speaker.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
Press SURR.-R +/– to adjust the surround
right speaker.
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. (See page 32.)
• The adjustments take effect for all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
Adjusting the treble
sound [TREBLE]
Press TREBLE +/–.
NOTE
• The adjustments take effect for all sources.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
• The mark
for.
shows the types of discs the operation is available
Basic playback
1 Press OPEN/CLOSE.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
• The system turns on and the disc
tray comes out.
AUDIO
• 0 on the center unit functions same
as OPEN/CLOSE on the remote
control.
2 Place a disc.
The buttons described below are used on pages 16 to 19.
When placing an 8 cm
(3 inches) disc
Label side up
3 Press 3 (play button).
For MP3
(play button)
Remote control
mode selector
The file control display (see page 24) appears on the TV screen.
For JPEG
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 24) appears on the TV screen.
7 To pause
Press 8.
To return to playback, press 3 (play button).
7 To stop
Press 7.
Number buttons
7 On-screen guide icons
During DVD VIDEO playback, the following guide icons may
appear for a while on the TV screen;
•
•
•
•
: appears at the beginning of a scene containing multi-
subtitle languages.
: appears at the beginning of a scene containing multi-audio
languages.
: appears at the beginning of a scene containing multi-angle
views.
(Play),
(Pause),
/
(Fast forward/
fast-reverse),
/
(Slow-motion forward/
reverse): appears when you perform each operation.
•
: the disc cannot accept an operation you have tried to do.
NOTE
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
• If you do not want the on-screen guide icons to appear, see page 33.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
MP3 disc
7 Playback information on the display window
Signal and speaker
indicators
DVD VIDEO
Example:
Track number
When a DVD VIDEO encoded with Dolby Digital 5.1ch is played
T R 1 2 3 1 2 : 3 4
Elapsed playing time
(hour:minute:second)
Chapter number
MP3 indicator
Elapsed playing time (minute:second)
(during playback only)
C 1 0 : 0 2 : 3 1
Pressing FL DISP.
Signal and speaker indicators (See page 21.)
Surround mode and digital signal format (See page 21.)
Group number
Pressing FL DISP.
MP 3 G 1 2 T 1 2 3
Title number
Chapter number
Track number
D V D T 1 C 1
JPEG disc
Group number
File number
VCD/SVCD/CD
Example:
When a CD is played back
J P G G 1 2 F 1 2 3
Signal and speaker
indicators
NOTE
Track number
• You can change the time information mode (except for MP3/JPEG).
(See page 22.)
• You can also check the playback information on the TV screen. (See
page 21.)
Elapsed playing time (minute:second)
NOTE
• “VCD” appears instead of “CD” when loading a VCD or SVCD.
• When a VCD or SVCD with PBC function is played, the elapsed
playing time does not appear, but “PBC” appears.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
7 Screen saver
Skip to the beginning of a
desired selection
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 32.
7 Using ¢/4 buttons
7 For DVD VIDEO (chapter): During
playback
For VCD/SVCD (track):
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
During playback without PBC function
For CD/MP3/JPEG (track/file): During playback or while
stopped
Press ¢ or 4 repeatedly.
7 During playback
NOTE
On the remote control:
• When playing back an MP3/JPEG disc, you can make operations
using the file control display. (See page 24.)
• This feature may not work for some discs.
Press
.
NOTE
7 Using number buttons on the remote control
• This function works in the same title.
• This feature may not work for some discs.
7 For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For VCD/SVCD (track):
Fast-forward/fast-reverse
search
During playback without PBC function
For CD/MP3/JPEG (track/file):
During playback or while stopped
7 During playback
Press number buttons (0-10, +10) to select
the desired number.
On the remote control:
Press ¡ or 1.
Each time you press the button, the search speed changes ( x 2, x 5,
x 10, x 20, x 60).
• For details on using the number buttons, see “How to use the
number buttons” below.
How to use the number buttons
To return to normal speed playback
Press 3 (play button).
To select 3:
To select 14:
To select 24:
To select 40:
Press 3.
Press +10, then 4.
Press +10 twice, then 4.
Press +10 three times, then 10.
Or press +10 four times, then 0.
On the center unit:
Press and hold ¢ or 4.
Continuously pressing ¢ or 4 increases the fast-forward/
reverse search speed ( x 5 → x 20).
NOTE
• When a DVD VIDEO, VCD, or SVCD is played back, no sound
comes out during fast-forward/reverse search.
• When a CD is played back, sound is intermittent and low during fast-
forward/reverse search.
• This feature may not work for some discs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
Locating a desired title/
group using number
buttons
7 During playback or while stopped.
1 Press TITLE/GROUP.
“_ _” or “_” is shown in the title/group display area in the
display window.
Example:
During DVD VIDEO playback
_ _
T
1 : 2 3 : 4 5
2 While the display window shows “_ _”
or “_”, use number buttons (0-10, +10)
to enter the desired title or group
number.
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
NOTE
• This feature may not work for some discs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• The mark
for.
shows the types of discs the operation is available
Using the surround mode
7 Auto Surround (AUTO SURR)
The buttons described below are used on pages 20 to 30.
This function automatically selects the appropriate surround mode
according to the input signals. For example, a multichannel source
is automatically reproduced in multichannel audio.
7 Dolby Surround
Dolby Pro Logic II*1
(play button)
Remote control
mode selector
Dolby Pro Logic II has a developed multichannel playback format
to decode all 2 channel sources — stereo source and Dolby
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music
mode:
• Pro Logic II Movie (PL II MOVIE)
Suitable for reproduction of Dolby Surround encoded sources
Cursor
(3/2/Y/5)/
ENTER
bearing the mark
.
• Pro Logic II Music (PL II MUSIC)
Suitable for reproduction of any 2 channel stereo music sources.
Dolby Digital*1
Used to reproduce multichannel soundtracks of the software
Number buttons
encoded with Dolby Digital (
).
2
7 DTS Digital Surround*
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel
digital audio format available on CD and DVD software.
IMPORTANT
Before using the remote control for the following
operation;
AUDIO
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
Available Surround modes for each input signal
The B marks show available surround modes.
*1
Surround
off
Auto
DTS Digital
Surround
Manufactured under license from
Dolby Laboratories. “Dolby”,
“Pro Logic”, and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital
Surround” are registered
trademarks of Digital Theater
Systems, Inc.
Mode
Dolby Surround
PL II
DSP
Surround
SURR
OFF
AUTO
SURR
PL II
Dolby
ALL CH
Signal
DTS
—
MOVIE*3 MUSIC*3
Digital
ST.*3
Dolby Digital
(Multichannel)
B
B
B
B
—
—
B
—
*2
*3
Dolby Digital
(2 channel)
B
B
—
—
B
DTS Digital
Surround
B
B
—
—
—
B
—
You can select these modes by
pressing SURR. (See page 21.)
(Multichannel)
DTS Digital
Surround
(2 channel)
B
B
B
B
B
B
B
B
—
—
—
—
B
B
Analog (VCR) or
Linear PCM
Continued on next page
20
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
7 All Channel Stereo (DSP)
7 When playing back 2 channel source
All Channel Stereo (ALL CH ST.) mode can reproduce a larger
stereo sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo
source.
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or the DSP (ALL CH ST.) mode.
Press SURR. repeatedly to select the
desired mode.
The surround mode is turned on and the current surround mode
appears on the display window.
Normal stereo sound
All Channel Stereo
Each time you press the button, the surround mode changes.
For details on each mode, see page 20.
To turn off the surround mode
Press SURR. repeatedly until SURR OFF
appears on the display window.
7 Indicators on the display window
Digital signal format indicators
Storing adjustments — auto memory
When you turn the power off, the system memorizes the current
surround mode. The memorized mode is automatically recalled
when you turn the power on.
LPCM:
GD:
C:
Lights when Linear PCM signal comes in.
Lights when Dolby Digital signals come in.
Lights when DTS Digital (Surround) signals
come in.
NOTE
No indication:
No digital signal indicator lights when analog
signals come in.
• When FM or AM is selected as the source, you cannot select any
surround mode.
Dolby Surround/DSP mode indicators
GPLII: Lights when Dolby Pro Logic II mode is activated.
Using the on-screen bar
You can check disc information and you can use some functions
using the on-screen bar.
DSP:
Lights when All Channel Stereo mode is activated.
Source signal indicators, etc.
Light to indicate the incoming signals.
a: Lights when the front left channel signal
comes in.
Showing the on-screen bar
7 Whenever a disc is loaded
b: Lights when the center channel signal comes in.
c: Lights when the front right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes in.
h: Lights when the monaural surround channel signal or 2
channel Dolby Surround signal comes in.
SW : Always lights.
Press ON SCREEN.
Each time you press the button, the on-screen bar changes as
follows on the TV screen.
Example:
During DVD VIDEO playback
The channel with “ ” shows that the corresponding speakers are
reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is reproduced, only
“
” lights.
Selecting the surround mode
The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
OFF
(The on-screen bar disappears)
(back to the beginning)
NOTE
• This function also takes effect for the sources other than DVD.
• The currently selected item shows green.
7 When playing back digital multichannel software
(except during SURR OFF mode)
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear PCM) is automatically selected.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
F Shows playback status.
appears during playback.
: appears during fast forward/reverse.
7 Contents of the on-screen bar during playback
DVD VIDEO
:
/
/
: appears during playback in forward slow-motion/
reverse slow-motion.
:
appears when paused.
:
appears when stopped.
G Select this to change time information (E). See “Changing the
time information”.
VCD
SVCD
CD
H Select this for Repeat Playback. (See page 29.)
I Select this for time search function. (See page 24.)
J Select this for chapter search function. (See page 23.)
K Select this to change audio language, channel, or stream. (See
page 26.)
L Select this to change subtitle language. (See page 26.)
M Select this to change view angle. (See page 25.)
N Shows Playback Mode status.
PROGRAM:appears during Program Playback. (See page 28.)
RANDOM:appears during Random Playback. (See page 28.)
Changing the time information
You can change the time
information in the on-screen bar on
the TV screen and the display
window of the center unit.
7 During playback
A Shows disc type.
B Shows current transfer rate (Megabits per second).
C Shows current title number.
D Shows current chapter number (for DVD VIDEO) or track
number (for other type of discs).
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
.
E Shows time information. See “Changing the time information”.
3 Press ENTER repeatedly to select the
desired information.
Example:
When elapsed playing time of disc is selected.
• TIME: Elapsed playing time of current chapter/track
• REM:
Remaining time of current chapter/track
• TOTAL: Elapsed time of disc
• T. REM: Remaining time of disc
4 Press ON SCREEN.
The on-screen bar disappears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
2 Press number buttons (1-10, +10) to
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
Playing from a specified
position on a disc
select the number of the desired item.
You can start playing a title, chapter or track you specify. You can
also play a disc from specified time.
To return to the menu
Press RETURN repeatedly until the menu screen appears.
When “NEXT” or “PREVIOUS” is shown on the TV
screen:
• To go to the next page, press x.
Locating a desired scene from the DVD
menu
DVD VIDEOs generally have their own menus which show
disc contents and you can display them on the TV screen.
You can locate a desired scene by using these menus.
• To return to the previous page, press 4.
NOTE
• If you want to play a PBC-compatible VCD/SVCD without using the
PBC function, perform any of the following:
7 Whenever a DVD VIDEO is loaded
•
•
Start playback by pressing number buttons while stopped.
Press x repeatedly until the desired track number is displayed,
then start playback by pressing 3 (play button).
The track number appears on the display window instead of
“PBC”.
1 Press TOP MENU or MENU.
The menu appears on the TV screen.
Example:
• To activate the PBC function when playing a PBC-compatible VCD/
SVCD without using the PBC function, perform any of the following:
•
Press TOP MENU or MENU.
•
Press 7 twice to stop playback, then press 3 (play button).
Locating a desired chapter using the on-
screen bar
Normally, a DVD VIDEO which contains more than one title
will have a “top” menu which lists the titles. Press
TOP MENU to show the title menu.
Some DVD VIDEO may also have a different menu which is
shown by pressing MENU.
7 During playback
See the instructions for each DVD VIDEO regarding its
2 pUarstieculCarumresnuo.r 3/2/Y/5 to select a
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
desired item.
3 Press ENTER.
• With some discs, you can also select items by entering the
corresponding number using number buttons.
Locating a desired scene using a VCD/
SVCD menu with PBC
4 Press number buttons (0-9) to enter the
desired chapter number.
Example:
A VCD or SVCD recorded with PBC has its own
menus such as a list of contained songs. You can
locate a specific scene by using these menus.
To select 8:
To select 10:
To select 37:
Press 8.
Press 1, then 0.
Press 3, then 7.
7 During playback with PBC function
1 Press RETURN repeatedly until the
To correct a misentry
Repeat step 4.
menu appears on the TV screen.
Example:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
5 Press ENTER.
Using the file control
display
6 Press ON SCREEN.
The on-screen bar disappears.
You can search and play desired groups and
tracks/files using the file control display on the
TV screen.
NOTE
• You can select up to the 99th chapter.
Current group / total group Playback mode (PROGRAM,
Locating a desired position by specifying
the time
You can locate a desired position by specifying the time from the
beginning the disc (while stopped) or the current title/track (during
playback).
number
RANDOM, REPEAT)
Tag information
(for MP3 only)
Elapsed playing time of current
track (for MP3 only)
7 For DVD VIDEO:
During playback
For VCD/SVCD:
While stopped or during playback without PBC function
For CD:
During playback or while stopped
7 When specifying the elapsed playing time from the
beginning of the disc
Perform the following procedure while stopped.
7 When specifying the elapsed playing time from the
beginning of current title/track
Perform the following procedure during playback.
Current group
Current track (file)
1 Press ON SCREEN twice.
Current track (file) / total track
(file) number on current group
Total track (file)
number on disc
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
Playback status
The file control display appears automatically during playback (for
MP3) or while stopped.
4 Use number buttons (0-9) to enter the
time.
You can specify the elapsed playing time from the beginning
of the disc (while stopped) or from the beginning of the current
title/track (during playback).
Example:
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)
elapsed
Press 2
Press 4
Press 3
Press 0
Press 8
To cancel a misentry
5 PPrersessCsursEorN2TrEepRea.tedly.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• You can specify time in hours/minutes/seconds for DVD VIDEO and
in minutes/seconds for VCD/SVCD/CD.
Continued on next page
24
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
7 For MP3:
During playback or while stopped
For JPEG:
Selecting a view angle
1WPhirleesstosppCedursor 3/2/Y/5 to select the
7 During playback of a disc containing multi-view angles
When using the ANGLE button:
desired group/track/file.
1 Press ANGLE.
• For MP3, playback starts from the selected track.
Example:
2 •PrFeorsJsPE3G, p(ropcleaedytobpuertftoormnt)heoforllEowNinTgEopRer.ation.
The first view angle is selected out of 3 view angles recorded.
• Track playback/slide-show starts from the selected track/
file.
• When you press ENTER for JPEG, only the selected file is
played back.
2 Press ANGLE repeatedly or Cursor Y/
5 to select the desired view angle.
To skip the file during playback
Press x/4 or Cursor 5/Y.
NOTE
When using the on-screen bar:
• You can also check playback information on the display window.
(See page 17.)
• Some group, track and file names may not be displayed correctly
depending on recording conditions.
• The order of groups, tracks and files may be displayed differently
from the order displayed on your personal computer.
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
Resume Playback
When Resume Playback is set to “ON”
(see page 33) and you stop playback by the
following operations, the position where
playback has been stopped is stored. (“RESUME” appears on the
display window.)
4 Press Cursor Y/5 to select the desired
view angle.
• Turning off the power (see page 13)
• Pressing 7 once
• Changing the source (see page 14)
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
To start playback from the stored position
(“RESUME” disappears.)
• Press 3 (play button) on the remote control or the center unit.
• Select DVD as the source again if you changed the source.
To clear the stored position
Press 7 again or open the disc tray.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
Selecting the subtitle
Selecting the audio
7 During playback of a disc containing subtitles in
7 During playback of a disc containing
several languages
audio in several languages
When using the SUBTITLE button:
When using the AUDIO button:
1 Press SUBTITLE.
1 Press AUDIO.
Example (DVD VIDEO):
Example (DVD VIDEO):
“ENGLISH” is selected out of 3 subtitle languages recorded.
“ENGLISH” is selected out of 3 audio languages recorded.
2 Press AUDIO repeatedly or Cursor Y/5
2 Press Cursor Y/5 to select the desired
to select the desired audio.
subtitle.
For SVCD
When using the on-screen bar:
• An SVCD can contain up to four subtitles. Pressing
SUBTITLE changes the subtitles regardless of whether the
subtitles are recorded or not. (Subtitles will not change if no
subtitle is recorded.)
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
NOTE
• Each time you press SUBTITLE, the subtitle appears and
disappears alternately.
When using the on-screen bar:
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
4 Press Cursor Y/5 to select the desired
audio.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 31.)
• “ST”, “L” and “R” is displayed when playing a VCD or SVCD
respectively representing “stereo”, “left sound” and “right sound”.
4 Press Cursor Y/5 repeatedly to select
the desired subtitle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 31.)
• Each time you press SUBTITLE, the subtitle appears and disappears
alternately.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
Changing the VFP setting
Special picture playback
The VFP (Video Fine Processor)
function enables you to adjust the
picture character according to the
type of programming, picture tone or personal preference.
Frame-by-frame playback
7 During playback
7 During playback
Press 8 repeatedly.
Each time you press the button, the still
picture advances by one frame.
1 Press VFP.
The current VFP settings appear on the TV screen.
Example:
To return to normal playback
Press 3 (play button).
Playing back in slow-motion
7 During playback
1 Press 8 at the point where you want to
2 Press Cursor 3/2 repeatedly to select
start playback in slow-motion from.
the VFP mode.
2 PThreessysstemypaus.es playback.
• NORMAL:Normally select this.
• CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP to
complete the setting.
• USER 1 and USER 2:
• Playback in forward slow-motion starts.
For DVD VIDEO only:
• To play back in reverse slow-motion, press 1.
You can adjust parameters that affect picture appearance.
Each time you press the button, the playback speed become
faster.
Only when selecting “USER 1” or “USER 2” in step
2, proceed to perform the following operation;
To return to normal playback
Press 3 (play button).
3 Press Cursor Y/5 repeatedly to select
a parameter you want to adjust.
NOTE
Adjust gradually and confirm picture appearance results are as
preferred.
• Sound cannot be heard during slow-motion playback.
• GAMMA:
Controls brightness of neutral tints while maintaining
brightness of dark and bright portions.
• BRIGHTNESS:
Controls screen brightness.
• CONTRAST:
Zooming in
7 During playback or while
paused
Controls screen contrast.
• SATURATION:
Controls screen color depth.
• TINT:
Controls screen tint.
• SHARPNESS:
1 Press ZOOM.
2 WEachhitlimeezyoouopmresesdZOinO,Mp, srceensesmCagunirfiscaotiorn3cha/n2ges/Y. /
5 to move zoom-in area.
Controls screen sharpness.
To return to normal playback
Press ZOOM repeatedly to select OFF.
NOTE
• The number of the magnification steps varies depending on the disc
type.
• During slide-show playback of a JPEG disc, zooming in is not
available. In such a case, press 8 to pause slide-show playback, then
zoom in.
• During playback of JPEG, there may be a case where Cursor (3/2/
Y/5) does not work in step 2.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
To clear the programs one by one from the last
entered number
Press CANCEL repeatedly.
4 Press ENTER.
Example:
To clear all programs
Press 7.
You can also clear the program by turning off the system.
5 Press Cursor Y/5 to change the
3 Press 3 (play button) to start Program
setting.
Playback.
6 Press ENTER.
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
7 TRhee pcuerraentt sVtFePpsesttin3gstoapp6eatroagaaind.just other
To check the program contents
During playback, press 7. Playback stops and the program window
appears.
parameters.
8 Press VFP.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and “RANDOM” disappears from the TV screen.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
NOTE
• The Resume function cannot be used with Program Playback.
• Program Playback may not work for some discs.
Program Playback
7 While stopped
Random Playback
You can play titles or tracks
on a disc in random order.
1 Press PLAY MODE repeatedly until
program window appears on the TV
screen.
7 While stopped
1 Press PLAY MODE repeatedly until
“RANDOM” appears on the TV screen.
2 Press 3 (play button).
After playing all titles/tracks on the disc, the system stops
playback and quits the Random mode.
To quit the Random mode
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.
While stopped, press PLAY MODE repeatedly until both program
window and “RANDOM” disappear from the TV screen.
You can also clear the Random mode by turning off the system.
2 Follow the instructions that appears on
the TV screen to program the desired
chapters/ tracks.
NOTE
• The same title/track will not be played back more than once during
Random Playback.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
• The content’s numbers that you have to specify for
programming varies depending on the disc type:
•
•
•
DVD VIDEO:
VCD, SVCD, CD:
MP3:
Titles and chapters
Tracks
Groups and tracks
• You can specify the chapters/tracks whose number is up to
99.
• (For CD, SVCD or VCD) When the total playback time
exceeds 99 minutes 59 seconds, “–:–” will appear on the
display window. But, it is possible to continue
programming.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
When using the on-screen bar (except for MP3/
JPEG disc):
Repeat Playback
1 Press ON SCREEN twice.
Repeating the current selection
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
7 For DVD VIDEO:
During playback
For VCD/SVCD:
During playback without PBC function
For CD/MP3/JPEG:
During playback or stopped
When using the REPEAT button:
4 Press Cursor Y/5 repeatedly to select
Press REPEAT.
the Repeat mode.
C 1 1 : 3 1 : 0 1
5 Press ENTER.
6 Press ON SCREEN.
Repeat mode indicator
The on-screen bar disappears.
Each time you press REPEAT, the Repeat mode changes.
To cancel Repeat Playback
Select “OFF” in step 4.
Display
window
TV screen
Meanings
Repeats the current group for
MP3/JPEG disc.
Repeating a desired part [A-B Repeat]
You can repeat playback of a
desired part by specifying the
beginning (point A) and ending
(point B).
REPEAT GROUP
Repeats the current title for
DVD VIDEO.
Repeats all tracks/files for
VCD/SVCD/CD/MP3/JPEG
disc.
ALL
1
7 During playback
REPEAT ALL
When using the A-B RPT button:
Repeats the current track for
VCD/SVCD/CD/MP3 disc.
REPEAT TRACK,
REPEAT STEP
1 Press A-B RPT at the beginning of the
part you want to repeat (point A).
Repeats the current chapter for
DVD VIDEO.
The repeat mode indicator “
” appears on the display
REPEAT STEP
2 wPirnedosws. A-B RPT again at the end of the
Repeat mode is off.
The system plays back the disc
normally.
No
indication
part you want to repeat (point B).
The repeat mode indicator on the display window changes to
“
” and A-B Repeat Playback starts. The selected
NOTE
part of the disc (between point A and B) is played repeatedly.
• For DVD VIDEO, REPEAT ALL may not be available depending on
the disc.
To cancel
Press A-B RPT during A-B Repeat Playback.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
When using the on-screen bar:
Sound and other settings
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
NOTE
• This function also takes effect for the sources other than DVD.
• Before you start operation;
There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1 Press SETTING.
Example:
4 Press Cursor Y/5 repeatedly to select
B A L : C E N T E R
“A-B”.
5 Press ENTER at the beginning of the
2 Press Cursor Y/5 to select the item
part you want to repeat (point A).
you want to set.
• BAL (Balance):
You can adjust the balance between the front left and front
right speakers.
• DEC (Decode):
6 Press ENTER at the end of the part you
When you play an external source (AUX DIGITAL is
selected as a source) that was encoded with Dolby Digital or
DTS Digital Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters
or tracks.
AUT (Auto)/PCM:Normally select this. The system
automatically detects the incoming signals.
DOLBY D: Select this if the symptoms above occur
when playing a disc (or software) encoded
with Dolby Digital.
want to repeat (point B).
7 AP-rBeRsespeOat PNlaySbCackRsEtarEtsN. .
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
DTS:
Select this if the symptoms above occur
when playing a disc (or software) encoded
with DTS Digital Surround.
• A. POS (Audio Position):
Tray lock
You can lock the tray and prohibit the unwanted disc ejection.
Set the audio position of subwoofer so that the subwoofer
level can be automatically adjusted properly. (The smaller
the number becomes, the more the level decreases
automatically when listening in stereo.)
On the center unit ONLY:
While the system is turned off
3 Press Cursor 3/2 to make an
adjustment or selection.
Example:
--
Press and hold
B A L : R
5
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
The adjustment display automatically disappears a few
seconds later with the current setting.
NOTE
• When “DOLBY D” or “DTS” is selected, if a signal encoded with
another digital format comes in, you cannot listen to the sound. (The
GDIGITAL or C indicator flashes.)
To cancel
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display
window.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
NOTE
Using the setup menus
• See the following “The language codes list” for the code of each
language, such as “AA”, etc.
• You can change the language used in the setup menus. See
“Menu description”.
The language codes list
Basic operation on the setup menus
AA Afar
IK Inupiak
IN Indonesian
IS Icelandic
IW Hebrew
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
IMPORTANT
Before using the remote control for the
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
following operation;
AUDIO
1 Set the remote control mode selector to
JI
Yiddish
AUDIO.
2 Press DVD.
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
JW Javanese
KA Georgian
KK Kazakh
SG Sangho
SH Serbo-Croatian
SI Singhalese
SK Slovak
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
Cursor
(3/2/Y/5)/
ENTER
SL Slovenian
SM Samoan
SN Shona
BI Bislama
BN Bengali, Bangla KU Kurdish
SO Somali
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
KY Kirghiz
LA Latin
SQ Albanian
SR Serbian
SS Siswati
LN Lingala
LO Laothian
LT Lithuanian
7 While stopped
ST Sesotho
SU Sundanese
1 Press SET UP.
CY Welsh
LV Latvian, Lettish SV Swedish
DA Danish
DZ Bhutani
EL Greek
MG Malagasy
MI Maori
SW Swahili
TA Tamil
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
TE Telugu
TG Tajik
EO Esperanto
ET Estonian
EU Basque
FA Persian
FI Finnish
FJ Fiji
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
MS Malay (MAY)
MT Maltese
2 Follow the instructions that appears on
FO Faroese
FY Frisian
GA Irish
MY Burmese
NA Nauru
the TV screen.
NE Nepali
GD Scots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
NL Dutch
Menu description
NO Norwegian
OC Occitan
TW Twi
UK Ukrainian
UR Urdu
OM (Afan) Oromo
OR Oriya
:Language menu (LANGUAGE)
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
HI Hindi
PA Panjabi
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
• Select the initial menu language*.
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
PL Polish
PS Pashto, Pushto
PT Portuguese
QU Quechua
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
• Select the initial audio language*.
RM Rhaeto-Romance ZU Zulu
7 SUBTITLE
Some DVDs have multiple subtitle languages.
• Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
• Select the language shown on the TV screen when operating this
system.
* When the language you have selected is not recorded to a disc,
the original language is automatically used as the initial
language.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
:Audio menu (AUDIO)
7 D. RANGE COMPRESSION
:Picture menu (PICTURE)
7 MONITOR TYPE
You can select the monitor type to match your TV when you play
DVDs recorded in the picture’s height/width ratio of 16:9.
• 16:9/16:9 MULTI (Wide television conversion)
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
(Dynamic range compression)
You can enjoy low level recorded sound clearly at night even at a
low volume when listening to the sound with Dolby Digital.
• AUTO
Select this when you want to enjoy surround sound with its
full dynamic range (no effect applied).
• ON
Select this when you want to fully apply the compression
effect (useful at midnight).
• 4:3 LB/4:3 MULTI LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars appear on the top and the bottom of the screen.
• 4:3 PS/4:3 MULTI PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars do not appear, however, the left and right edges of
the pictures will not be shown on the screen.
NOTE
• When you play a multichannel Dolby Digital source with the
surround mode is off, the setting of D. RANGE COMPRESSION is
set to ON automatically.
:Speaker setting menu
(SPK. SETTING)
Ex.: 16:9
Ex.: 4:3 LB
Ex.: 4:3 PS
NOTE
7 Level menu (LEVEL)
• Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size may
become “4:3 LB” or “4:3 MULTI LB” with some DVDs. This
depends on how DVDs are recorded.
• When selecting “MULTI” options as the monitor type for the multi-
color system TV, the system outputs PAL or NTSC video signal
according to the disc, regardless of the scan mode setting (see page
15).
CENTER SPEAKER/SURROUND LEFT SPEAKER/
SURROUND RIGHT SPEAKER/SUB WOOFER
Adjust the output level of related speakers.
TEST TONE*
Outputs the test tone.
RETURN
7 PICTURE SOURCE
Returns to the SPK. SETTING menu.
When you set the scan mode to PROGRESSIVE (see page 15), you
can obtain optimal picture quality by selecting whether the content
on the disc is processed by field (video source) or by frame (film
source).
* The test tone comes out of all of the activated speakers in the
following sequence:
s Front left speaker s Center speaker s Front right
speaker s Surround right speaker s Surround left
speaker s (back to the beginning)
Normally set to “AUTO”.
• AUTO
Used to play a disc containing both video and film source
materials.
This system recognizes the source type (video or film) of the
current disc according to the disc information.
• If the playback picture is unclear or noisy, or the oblique
lines of the picture are rough, try to change to other modes.
• FILM
Suitable for playing back a film source disc.
• VIDEO
Suitable for playing back a video source disc.
7 SCREEN SAVER (See page 18.)
You can activate or deactivate Screen Saver function.
7 FILE TYPE
When both MP3 files and JPEG files are recorded on a disc, you
can select which files to play.
After changing FILE TYPE setting, be sure to turn the power off,
then turn the power on to enable the new setting.
• AUDIO
Select this to play MP3 files.
• STILL PICTURE
Select this to play JPEG files.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
7 Distance menu (DISTANCE)
7 Parental lock menu (PARENTAL LOCK)
You can restrict playback of a DVD VIDEO containing violent
scenes that is not suitable for your other family members.
• This setting takes effect only for DVDs containing the Parental
Lock level information — Level 1 (most restrictive) to Level 8
(least restrictive).
Example:
Center
speaker
Subwoofer
Front right
3.0 m
2.7 m
2.4 m
2.1 m
COUNTRY CODE
Front left
Select this when you set the code for your resident. (See
page 34.)
SET LEVEL
Select this when you set the level of restriction.
PASSWORD
This item is selected automatically when some changes
are made on Parental Lock setting. Enter a four-digit
number as your password with number buttons 0-9, then
press ENTER.
Surround left
Surround right
• If you have failed to enter your correct password three
times, you cannot select an item other than EXIT. In such a
case, press ENTER to exit the mode, then try the setting
again.
In this case, set the distance of each speaker as follows;
• Distance of front speakers:
• Distance of center speaker:
3.0 m
2.7 m
EXIT
• Distance of surround speakers: 2.4 m
Returns to OTHERS menu.
FRONT SPEAKER/CENTER SPEAKER/SURROUND
SPEAKER
Adjust the distance from the listening position to the speakers.
Within the range from 0.3 m to 9.0 m by 0.3 m.
• Be sure to exit the Parental Lock setting mode after
entering your password. Otherwise, the changes you made
won’t be stored.
• If you forget your password, enter “8888” instead of your
password.
RETURN
Returns to the SPK. SETTING menu.
NOTE
• When you enter wrong passwords three times, you can select “EXIT”
only.
:Other setting menu (OTHERS)
7 RESUME (See page 25.)
You can activate or deactivate Resume Playback function.
7 ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons. (See page
16.)
7 AV COMPULINK MODE
You must set this item correctly to use the AV COMPU LINK
system. (See page 37.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
Country/Area codes list for Parental Lock
AD Andorra
ER Eritrea
ES Spain
RW Rwanda
Lao People’s Democratic
Republic
LA
AE United Arab Emirates
AF Afghanistan
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
ET Ethiopia
LB Lebanon
AG Antigua and Barbuda
FI
FJ
Finland
Fiji
LC Saint Lucia
AI
Anguilla
LI
Liechtenstein
AL Albania
FK Falkland Islands (Malvinas)
LK Sri Lanka
LR Liberia
SE Sweden
AM Armenia
SG Singapore
SH Saint Helena
Micronesia (Fedelated States
FM
of)
AN Netherlands Antilles
AO Angola
LS Lesotho
FO Faroe Islands
FR France
LT Lithuania
LU Luxembourg
LV Latvia
SI
SJ
Slovenia
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
Svalbard and Jan Mayen
FX France, Metropolitan
GA Gabon
SK Slovakia
LY Libyan Arab Jamahiriya
MA Morocco
SL Sierra Leone
SM San Marino
GB United Kingdom
GD Grenada
AU Australia
MC Monaco
SN Senegal
AW Aruba
GE Georgia
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
SO Somalia
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
GF French Guiana
GH Ghana
SR Suriname
ST Sao Tome and Principe
SV El Salvador
GI
Gibraltar
BD Bangladesh
BE Belgium
GL Greenland
GM Gambia
MM Myanmar
MN Mongolia
MO Macau
SY Syrian Arab Republic
SZ Swaziland
BF Burkina Faso
BG Bulgaria
GN Guinea
TC Turks and Caicos Islands
TD Chad
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
MP Northern Mariana Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
BH Bahrain
TF French Southern Territories
TG Togo
BI
BJ
Burundi
Benin
TH Thailand Code Language
South Georgia and the South
Sandwich Islands
GS
BM Bermuda
TJ
Tajikistan
BN Brunei Darussalam
BO Bolivia
GT Guatemala
GU Guam
MU Mauritius
MV Maldives
TK Tokelau
TM Turkmenistan
TN Tunisia
BR Brazil
GW Guinea-Bissau
GY Guyana
MW Malawi
BS Bahamas
MX Mexico
TO Tonga
BT Bhutan
HK Hong Kong
MY Malaysia
TP East Timor
TR Turkey
BV Bouvet Island
BW Botswana
BY Belarus
MZ Mozambique
NA Namibia
Heard Island and McDonald
Islands
HM
TT Trinidad and Tobago
TV Tuvalu
HN Honduras
HR Croatia
HT Haiti
NC New Caledonia
NE Niger
BZ Belize
TW Taiwan
CA Canada
NF Norfolk Island
NG Nigeria
TZ Tanzania, United Republic of
UA Ukraine
CC Cocos (Keeling) Islands
CF Central African Republic
CG Congo
HU Hungary
ID
IE
IL
IN
IO
IQ
IR
IS
Indonesia
Ireland
Israel
NI
Nicaragua
UG Uganda
NL Netherlands
NO Norway
NP Nepal
United States Minor Outlying
Islands
UM
CH Switzerland
CI
Côte d’Ivoire
India
US United States
CK Cook Islands
CL Chile
British Indian Ocean Territory NR Nauru
UY Uruguay
Iraq
NU Niue
UZ Uzbekistan
CM Cameroon
CN China
Iran (Islamic Republic of)
NZ New Zealand
OM Oman
VA Vatican City State (Holy See)
Iceland
Italy
Saint Vincent and the
Grenadines
VC
CO Colombia
CR Costa Rica
CU Cuba
IT
PA Panama
JM Jamaica
PE Peru
VE Venezuela
JO
JP
Jordan
Japan
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
VG Virgin Islands (British)
CV Cape Verde
CX Christmas Island
CY Cyprus
VI
Virgin Islands (U.S.)
KE Kenya
VN Vietnam
KG Kyrgyzstan
KH Cambodia
VU Vanuatu
CZ Czech Republic
DE Germany
DJ Djibouti
PL Poland
WF Wallis and Futuna Islands
WS Samoa
KI
Kiribati
PM Saint Pierre and Miquelon
PN Pitcairn
KM Comoros
YE Yemen
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
KN Saint Kitts and Nevis
PR Puerto Rico
PT Portugal
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
Korea, Democratic People’s
Republic of
KP
PW Palau
KR Korea, Republic of
KW Kuwait
PY Paraguay
QA Qatar
EC Ecuador
ZR Zaire
EE Estonia
KY Cayman Islands
KZ Kazakhstan
RE Réunion
ZW Zimbabwe
EG Egypt
RO Romania
EH Western Sahara
RU Russian Federation
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
Manual tuning
AUDIO
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
1 Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
The buttons described below are used on pages 35 and
36.
8 1 0 k
2 Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
Remote control
mode selector
NOTE
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
Number buttons
Setting the AM tuner
interval spacing
Some countries space AM stations 9 kHz apart, and some countries
use 10 kHz spacing.
You can only change the AM tuner interval spacing while
selecting AM as the band.
• You can operate the following procedures using the buttons on
the front panel.
7 To change the interval spacing into 10 kHz
Press ¢ while holding down 7.
7 To change the interval spacing into 9 kHz
Press 4 while holding down 7.
NOTE
• 9 kHz is the initial setting.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 35 for button locations.
Tuner operations
Preset tuning
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
Selecting the FM
reception mode
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
7 To preset the stations
7 While listening to an FM station
1 Tune in the station you want to preset.
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
• AUTO MUTING:
When a program is broadcast in stereo, you will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations. The AUTO
MUTING indicator lights on the display window.
• MONO:
• If you want to store the FM reception mode for an FM
station, select the reception mode you want. See “Selecting
the FM reception mode”.
Example:
When the system is tuned in to 103.50 MHz.
1 0 3 . 5 0M
2 Press MEMORY.
Reception will be improved although you will lose the stereo
effect. (The ST indicator goes off.) In this mode, you will hear
noise until you are tuned in to a station. (The AUTO MUTING
indicator also goes off.)
_ _
1 0 3 . 5 0 M
While “– –” are flashing:
3 Press number button(s) (1-10, +10) to
select a preset number you want.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
Example:
When the preset channel 1 is selected.
1 1 0 3 . 5 0 M
If the setting is cancelled before you finish, start from step 2
again.
While the selected number is flashing:
4 Press MEMORY.
The selected number stops flashing.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
5 aRgaeinp.eat steps 1 to 4.
• Storing a new station to a used number erases the previously
stored one.
7 To tune in to a preset station
1 Press FM/AM repeatedly to select FM or
AM.
2 Press number button(s) (1-10, +10) to
select a preset number.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or
IMPORTANT
audio with the simplest operation. If your video/audio player (such
as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and
are tied with the JVC AV COMPU LINK cable(s), simply starting
the player will automatically make all necessary settings on the
television and/or amplifier/receiver to allow you to enjoy the
playback.
When you make video connection between the player and another
device (such as a TV) via the composite, S-video or component
jacks, as well as AV COMPU LINK connection, see also the
instruction manual of the other device.
Notes for connection
• There may be no description about connections to the player in
the instruction manual of a television or VCR. However, a
television or VCR with AV COMPU LINK terminals indicating
“II,” “EX” or “III” can be connected to the player.
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/
or audio by simply pressing Play on the source component (the
component which plays back the video or audio, such as a DVD
player or VCR). You do not even have to switch on power on the
TV.
Connection and setup
Using an AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
• The center unit setting for AV COMPU LINK is controlled using
the OTHERS menu in the preference display (see page 33).
• Refer also to the instruction supplied with your TV or VCR.
1 Turn on the main power of the
television.
2 Insert a disc (or tape) into the source
Center unit
component.
3 Press 3 of the source component.
TV
The following actions are performed automatically:
• Turning on the television power.
• Setting the source of the television to the external input
(VIDEO-1, VIDEO-2 or VIDEO-3).
• If you connect the center unit to a television via AV COMPU
LINK, set the center unit’s AV COMPU LINK setting as follows.
•
•
•
When connecting to the VIDEO-1 input terminal of the
television: DVD2
When connecting to the VIDEO-2 input terminal of the
television: DVD3
When connecting to the VIDEO-3 input terminal of the
television: DVD1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
References
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
Maintenance
• DO NOT use any solvent — such as
conventional record cleaner, spray,
thinner or benzine — to clean the
disc.
7 Handling Discs
• Remove the disc from its case by holding it
at the edge while pressing the center hole
lightly.
• Do not touch the shiny surface of the disc
or bend the disc.
• Put the disc back in its case after use to
prevent warping.
7 Cleaning the system
• Stains on the system should be wiped off with a soft cloth. If the
system is heavily stained, wipe it with a cloth soaked in water
diluted neutral detergent and wrung well, then wipe clean with a
dry cloth.
• Be careful not to scratch the surface of the
disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes and moisture.
• Since the system may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
•
•
•
•
•
DO NOT wipe it with a hard cloth.
DO NOT wipe it strong.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substance such as insecticides to it.
DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
The power cord is not connected.
SOLUTION
Power does not come
on.
Connect the power cord correctly. (See page 10.)
The remote control does The batteries are exhausted.
not work.
Replace the batteries. (See page 6.)
Sunlight is falling directly on the remote sensor.
Hide the remote sensor from direct sunlight.
The remote control does The remote control mode is not for the desired source. Before operation, press one of the source selecting
not work as expected.
buttons for the desired source.
The position of the remote control mode selector is
incorrect.
Set the selector to the correct position.
No sound.
The speaker cord is not connected.
Check the connection. (See page 8.)
The audio cord is not connected to AUX IN and/or
DIGITAL IN correctly.
Connect the cord correctly. (See page 10.)
An incorrect source has been selected.
The decode mode is not set correctly.
Select the correct source. (See page 14.)
Select the proper decode mode. (See page 30.)
Connect the cord correctly. (See page 9.)
Use a playable disc. (See page 3.)
No picture is displayed The video cord is not connected correctly.
on the TV screen.
The disc is not playable.
No picture is displayed The scan mode is set to “NTSC PROG.” though the
Change the scan mode to “PAL” or “NTSC.” (See page
15.)
on the TV screen, the
center unit is connected to the TV which does not
picture is blurred, or the support the progressive video input.
picture is divided into
two parts.
Video and audio are
distorted.
The disc is scratched or dirty.
Replace or clean the disc.
A VCR is connected between the center unit and the
TV.
Connect the center unit and TV directly. (See page 9.)
The picture does not fit The monitor type is not set correctly.
the TV screen.
Set “MONITOR TYPE” properly. (See page 32.)
Hard to listen to
broadcast because of
noise.
Antennas are disconnected.
Reconnect the antennas correctly and securely. (See
page 7.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
References
7 Front / Center speakers (SP-THS1F)
Specifications
Type:
1-Way Bass-Reflex Type
(Magnetically-shielded Type)
8.0 cm cone M 1
Speaker:
Power Handling Capacity: 55 W
7
Center unit (XV-THS1)
Audio section
Impedance:
6 C
Front/Center/Surround:
52 W per channel, RMS at 6 C at 1
kHz, with 10 % total harmonic
distortion.
52 W, RMS at 6 C at 100 Hz, with
10 % total harmonic distortion.
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
80.0 dB/W·m
Subwoofer:
106 mm M 119.5 mm M 102 mm
Digital input*1:
Mass:
0.49 kg each
OPTICAL DIGITAL IN:
–21 dBm to –15 dBm (660 nm E30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
7 Surround speakers (SP-THS1S)
1
Type:
1-Way Bass-Reflex Type
(Magnetically-shielded Type)
Video section
Video System:
Horizontal Resolution:
Signal-to-Noise Ratio:
Video output level
Composite:
Speaker:
8.0 cm cone M 1
NTSC/PAL
500 lines
64 dB
Power Handling Capacity: 55 W
Impedance:
6 C
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
80 dB/W·m
1.0 V(p-p)/75 C
S-video-Y:
S-video-C:
Component-Y:
1.0 V(p-p)/75 C
106 mm M 119.5 mm M 102 mm
0.286 V (0.3 V*2)(p-p)/75 C
1.0 V(p-p)/75 C
Mass:
0.56 kg each
Component-PB/PR:
For PAL system
0.7 V(p-p)/75 C
7 Subwoofer (SP-WS1)
*2
Type:
1-Way Bass-Reflex Type
Tuner section
Tuning Range
FM:
(Magnetically-shielded Type)
Speaker:
16.0 cm cone M 1
87.50 MHz to 108.00 MHz
531 kHz to 1602 kHz
(at 9 kHz cannel spacing)
530 kHz to 1600 kHz
Power Handling Capacity: 55 W
AM:
Impedance:
6 C
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
30 Hz to 150 Hz
76 dB/W·m
(at 10 kHz cannel spacing)
128 mm M 284 mm M 337 mm
3.3 kg
General
Mass:
Power Requirements (except for Hong Kong):
AC 110 V/ AC 127 V/ AC 220 V/
AC 230-240V
, 50/60 Hz
Power Requirements (for Hong Kong only):
Designs & specifications are subject to change without notice.
AC 220 V
, 50 Hz
Power Consumption:
75 W (at operation)
1.0 W (in standby mode)
Dimensions (W
Mass:
M
H
M
D): 360 mm
5.3 kg
M
65 mm
M
370 mm
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EN, CS
© 2004 Victor Company of Japan, Limited
0804TMMMDWJEM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD DIGITAL CINEMA SYSTEM
TH-S1
Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S
INSTRUCTIONS
GVT0141-015A
[UX/UG]
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings, Cautions and Others/
/
CAUTION
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted
candles, on the apparatus.
.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
CAUTION—
(XV-THS1)
button!
Disconnect the mains plug to shut the power off completely
(the STANDBY lamp goes off).
The
button in any position does not disconnect the mains
line.
• When the system is on standby, the STANDBY lamp lights
red.
• When the system is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
G-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open
and interlock failed or defeated. Avoid direct exposure to
beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are
shown below:
Wall or obstructions
Front
Wall or
obstructions
8 cm
XV-THS1
3 cm
3 cm
XV-THS1
No
10 cm
obstructions
15 cm
Front view
Side view
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Introduction .....................................2
Notes on handling .................................................................2
Supplied accessories ............................................................2
Playback ........................................16
Basic playback ....................................................................16
One Touch Replay ...............................................................18
Fast-forward/fast-reverse search ........................................18
Skip to the beginning of a desired selection .......................18
Locating a desired title/group using number buttons .........19
About discs .....................................3
Playable disc types ...............................................................3
Index of parts and controls ............5
Advanced operations ....................20
Using the surround mode ...................................................20
Using the on-screen bar .....................................................21
Playing from a specified position on a disc .........................23
Using the file control display ..............................................24
Resume Playback ...............................................................25
Selecting a view angle .........................................................25
Selecting the subtitle ..........................................................26
Selecting the audio .............................................................26
Special picture playback .....................................................27
Program Playback ...............................................................28
Random Playback ...............................................................28
Repeat Playback .................................................................29
Tray lock .............................................................................30
Sound and other settings ....................................................30
Connections ....................................7
Connecting the FM and AM antennas ....................................7
Connecting the satellite (front, center, surround) speakers and
the subwoofer ......................................................................... 8
Speaker layout ......................................................................9
Connecting a TV ....................................................................9
Connecting to an analog component ...................................10
Connecting to a digital component .....................................10
Connecting the power cord .................................................10
Operating external components with
the remote control ........................11
Operating the TV .................................................................11
Operating the VCR ..............................................................12
Setting DVD preferences ..............31
Using the setup menus .......................................................31
Menu description ................................................................31
Basic operations ...........................13
Turning the system on/off ...................................................13
Selecting the source to play ................................................14
Adjusting the volume [VOLUME] ........................................14
Listening with headphones (not supplied) ..........................14
Turning off the sound temporarily [MUTING] .....................14
Adjusting the brightness of the indications [DIMMER] .......14
Sleep Timer [SLEEP] ...........................................................15
Adjusting the output level of the subwoofer and center/
Tuner operations ...........................35
Setting the AM tuner interval spacing .................................35
Manual tuning .....................................................................35
Preset tuning ......................................................................36
Selecting the FM reception mode ........................................36
surround speakers [S.WFR, CENTER, L-SURR.-R] .............15
Adjusting the treble sound [TREBLE] ..................................15
Changing the scan mode ....................................................15
AV COMPU LINK remote control
system ...........................................37
References ....................................38
Maintenance .......................................................................38
Troubleshooting ..................................................................38
Specifications .....................................................................39
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
7 Safety precautions
Notes on handling
7 Important cautions
Avoid moisture, water and dust
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not place it near
a heating device.
Installation of the system
• Select a place which is level, dry and neither too hot nor too cold;
between 5°C and 35°C.
When you are away
When away on travel or for other reasons for an extended period of
time, disconnect the power cord plug from the wall outlet.
• Leave sufficient distance between the system and the TV.
• Do not use the system in a place subject to vibration.
Power cord
Do not block the vents
Blocking the vents may damage the system.
• Do not handle the power cord with wet hands!
• A small amount of power is always consumed while the power
cord is connected to the wall outlet.
• When unplugging the power cord from the wall outlet, always
pull on the plug, not the power cord.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents including disinfectants.
These may cause deformation or discoloring.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart, flower or
credit card, etc.) available on the market, because it may damage
the system.
If water gets inside the system
Turn the system off and disconnect the power cord plug from the
wall outlet, then call the store where you made your purchase.
Using the system in this condition may cause fire or electrical
shock.
• Do not use a disc with tape, stickers, or paste on it, because it
may damage the system.
Label sticker
Supplied accessories
Check to be sure you have all of the supplied accessories.
The number in parentheses is the quantity of the pieces supplied.
If anything is missing, contact your dealer immediately.
Sticker
Paste
• Remote control (1)
• Batteries (2)
• FM antenna (1)
Note about copyright laws
• AM loop antenna (1)
• Composite video cord (1)
• AC plug adaptor (1)
Check the copyright laws in your country before recording from the
discs. Recording of copyrighted material may infringe copyright
laws.
Note about copyguard system
The discs are protected by copyguard system. When you connect
the system to your VCR directly, the copyguard system activates
and the picture may not be played back correctly.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Region code of DVD VIDEO
DVD VIDEO players and DVD VIDEO discs have their own
Region Code numbers. This system can play back DVD VIDEO
discs whose Region Code numbers include the system’s Region
Code, which is indicated on the rear panel.
Playable disc types
This system has been designed to play back the following discs:
DVD VIDEO, Video CD (VCD), Super Video CD (SVCD), Audio
CD (CD), CD-R and CD-RW.
Example of playable DVD:
• This system accommodates the NTSC and PAL system. Note that
an NTSC video signal on a disc is converted to the PAL60 signal
and output when the scanning mode (see page 15) is set to“PAL”.
• This system can also play finalized DVD-R/-RWs recorded in
DVD VIDEO format. However, some discs may not be played
because of their disc characteristics or recording conditions.
If a DVD with an improper Region Code number is loaded,
“REGION CODE ERROR!” appears on the TV screen and
playback cannot start.
Discs you can play:
DVD VIDEO
Audio CD
CD-R
About files (tracks) and folders (groups) on the disc
This system can also play MP3 and JPEG files recorded on CD-Rs
and CD-RWs.
Files are sometimes grouped into folders on CD-Rs or CD-RWs by
genre, album, etc.
In this manual, “group” is also referred to as “folder”, and “track”
VCD
as “file”.
• This system recognizes up to 150 files per group, and 99 groups
per disc.
The total number of files this system can detect on a disc is up to
1000.
SVCD
CD-RW
• The following discs cannot be played back:
DVD-ROM, DVD-RAM, CD-ROM, CD-I (CD-I Ready),
Photo CD, SACD, etc.
Playing back these discs will generate noise and damage the
speakers.
• On some DVD VIDEOs, VCDs or SVCDs, their actual
operation may be different from what is explained in this
manual. This is due to the disc programming and disc
structure, not a malfunction of this system.
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Notes on CD-R and CD-RW
Notes on MP3 files
• User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can
be played back only if they are already “finalized”.
• When making your own disc, select ISO 9660 Level 1 or Level 2
for the disc format.
• This system supports “multi-session” discs (up to 20 sessions).
• This system cannot play “packet write” discs.
• Before playing CD-Rs or CD-RWs, read their instructions or
cautions carefully.
• CD-RWs may require a longer readout time. This is caused by
the fact that the reflectance of CD-RWs is lower than that of
regular CDs.
• Some discs may not be played due to their disc characteristics,
recording conditions, or damage or stain on them.
• This system can play CD-Rs or CD-RWs recorded in the audio
CD format.
• Tag information (album name, artist name, and track name) can
be shown on the TV. (See page 24.)
• The system can play back the MP3 files recorded at 32 kbps to
320 kbps as a bit rate, and at 16 kHz, 22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, 48 kHz as a sampling frequency.
• We recommend to record each piece of material (song) at a
sample rate of 44.1 kHz and at a data transfer rate of 128 kbps.
Notes on JPEG files
• We recommend to record a file at 640 x 480 resolution. (If a file
has been recorded at a resolution of more than 640 x 480, it will
take a longer time to be displayed.)
• This system can only play baseline JPEG files.
This system can also play CD-Rs or CD-RWs if MP3 or JPEG
files are recorded on them.
Especially, the configuration and characteristics of an MP3/JPEG
disc are determined by the writing (encoding) software and
hardware used for recording. Therefore, due to the software and
hardware used, the following symptoms may occur:
•
Some tracks/files on an MP3/JPEG disc may be skipped or may
not be played normally.
•
Some files on a JPEG disc may be played distortedly.
Notes on MP3/JPEG discs
• MP3/JPEG discs (either CD-R or CD-RW) require a longer
readout time. (It differs due to the complexity of the directory/file
configuration.)
• The system can only recognize files with one of the following
extensions, which can be in any combination of upper and lower
case:
MP3:
“.MP3”, “.mp3”
JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”
• If different kinds of the file are mixed on a disc, set the FILE
TYPE setting in the PICTURE menu to the appropriate setting
for the data to be read (“AUDIO” or “STILL PICTURE”). (See
page 32.)
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index of parts and controls
The numbers in the figures indicate the pages where the details of the parts are described.
Front panel (center unit)
Display window
21
36
17
21
15
17 17 17
17 17
35 35
36
29
Disc tray (inside): 16
16
13
16
16
18 14
14
14
18
13
16
Remote sensor: 6
Rear panel (center unit)
See below.
37
9
9
7
10
8
10
10
Setting the VOLTAGE SELECTOR
Before plugging, set the correct voltage for your area with the
voltage selector on the rear panel of the center unit.
Use a screwdriver to rotate the voltage selector so that the voltage
number the voltage mark is pointing at is the same as the voltage
where you are plugging in the center unit.
Voltage mark
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Index of parts and controls
Remote control
Putting batteries in the remote control
13
11
12
16
11
14
R6P (SUM-3)/AA (15F)
type dry-cell batteries
(supplied)
14
17
26
26
21
14
11
11
11 – 36
16
18, 35
18
16, 36
23
23
16, 36
If the range or effectiveness of the remote control decreases,
replace both batteries.
15, 31
21
CAUTION
• Do not expose batteries to heat or flame.
12, 18
19
25
Operating the system from the remote
control
Aim the remote control directly to the front panel of the center unit.
• Do not hide the remote sensor.
Number
27
buttons: 18
28
29
29
31
30
28
23
15, 27
14
15
15
15
15
15
NOTE
• To use the buttons
under the cover, slide
down the cover.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
If reception is poor
Connecting the FM and
AM antennas
Center unit
AM loop antenna
7 AM loop antenna
Setting up supplied AM loop antenna
Outdoor single vinyl-covered wire
antenna (not supplied)
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
7 FM antenna
FM antenna (supplied)
Center unit
Connecting AM loop antenna
Extend the supplied FM antenna
horizontally.
1
2
3
If reception is poor
Center unit
Outdoor FM antenna
(not supplied)
Standard type (75 C
coaxial) connector
Outdoor FM antenna cord
(not supplied)
Antenna cord
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords and power cords. This could cause poor reception.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting the satellite (front, center, surround)
speakers and the subwoofer
Front speakers
Center speaker
Speaker cord
• Connect the black cords to the black (-) terminals.
• Connect the white cords to the red (+) terminals.
Before connecting
the speaker cords;
Twist and pull the
insulation coat off
and remove.
Subwoofer
Surround speakers
• When installing the satellite speakers on the wall;
CAUTION
•
Be sure to have them installed on the wall by a qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated on the rear of the center unit.
• DO NOT connect more than one speaker to one speaker terminal.
•
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Speaker layout
Connecting a TV
• Distortion of picture may occur when connecting the TV via a
VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu
correctly according to the aspect ratio of your TV. (See page 32.)
Center speaker
Front left
speaker
Front right
speaker
Subwoofer
7 To connect a TV equipped with the component video
input jacks
Center unit
TV
To component
video input
Surround left
speaker
Surround right
speaker
Component video cord (not supplied)
NOTE
NOTE
• Although the satellite speakers and the subwoofer are magnetically
shielded, the TV screen may appear mottled. In this case, keep
enough distance between the speakers and the TV.
• The speakers are magnetically shielded to avoid color distortions on
TVs. However, if not installed properly, it may cause color
distortions. So, pay attention to the following when installing the
speakers.
• If your TV supports progressive video input, you can enjoy a high
quality picture by setting the progressive scan mode to active. (See
page 15.)
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.
• The component video signals can be output only when you select
“DVD” as the source to play. (See page 14.)
- When placing the speakers near a TV set, turn off the TV’s
main power switch or unplug it before installing the speakers.
Then wait at least 30 minutes before turning on the TV’s main
power switch again.
7 To connect a TV equipped with the S-VIDEO and/or
the composite video input jacks
Some TVs may still be affected even though you have followed
the above. If this happens, move the speakers away from the TV.
• Place the satellite speakers on a flat and level surface.
• Be sure to place the subwoofer to the TV’s right. If you place the
subwoofer to the TV’s left, keep sufficient distance between them to
prevent the TV screen from appearing mottled.
Center unit
Composite video cord
(supplied)
TV
S-VIDEO cord (not supplied)
NOTE
• Select the appropriate scan mode according to your TV. (See page
15.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting to an analog
component
Connecting to a digital
component
You can enjoy the sound of an analog component.
You can enjoy the sound of a digital component.
Center unit
Center unit
DBS* tuner
MD recorder
To digital optical
output
RCA pin plug cord
(not supplied)
Digital optical cord
(not supplied)
* DBS = Direct Broadcasting Satellite
To audio output
NOTE
When playing a video component such as a DBS tuner;
• To listen to the sound, select “AUX DIGITAL” as the source to play.
(See page 14.)
• To see the picture, connect the video output jack of the component to
the video input jack of the TV directly, and select the correct input
mode on the TV.
VCR
TV
Cassette recorder
NOTE
• If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this system, the sound output
through this system may be distorted.
Connecting the power
cord
• When playing a video component such as a VCR;
•
To listen to the sound, select “AUX” as the source to play. (See
page 14.)
Make sure that all other connections have been completed.
•
To see the picture, connect the video output jack of the component
to the video input jack of the TV directly, and select the correct
input mode on the TV.
Center unit
Power cord
Plug into AC outlets.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
NOTE
• Preset settings, such as preset stations and surround mode adjustment,
may be erased in a few days in the following cases;
•
If you unplug the power cord of the center unit.
If a power failure occurs.
•
• If the wall outlet does not match the AC plug, use the supplied AC
plug adaptor.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating external components with the remote control
4 Press number buttons (1-9, 0) to enter
The buttons described below are used on pages 11 and
12.
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV:
Press 1, then 0.
For a Toshiba TV:
Press 0, then 8.
Manufacturer
JVC
Code
01
Manufacturer
Samsung
Sanyo
Code
12
Hitachi
10
13
Magnavox
Mitsubishi
Panasonic
RCA
02
Sharp
06
03
Sony
07
Remote control
mode selector
04, 11
05
Toshiba
Zenith
08
09
(play button)
5 Release
TV.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
7 Operation
Aim the remote control at the TV.
IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
Number
buttons
The following buttons are available:
TV:Turns TV on and off.
TV VOL +/–:Adjusts the volume.
TV/VIDEO:Selects the input mode (either TV or VIDEO).
CHANNEL +/–:Changes the channels.
1-10, 0, +10 (100+):Selects the channel.
TV RETURN:Alternates between the previously selected channel
and the current channel.
NOTE
• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.
Operating the TV
7 To set the manufacturer’s code
You can operate a JVC TV without setting the manufacturer’s code.
1 Slide the remote control mode selector
to TV.
2 Press and hold
TV.
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 11 for button locations.
Operating external components with the remote control
7 Operation
Operating the VCR
7 To set the manufacturer’s code
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a VCR;
Set the remote control mode selector to VCR.
1 Slide the remote control mode selector
The following buttons are available:
VCR:Turns VCR on and off.
3 (play button):Starts playback.
7:Stops operation.
8:Pauses playback.
¡:Fast forwards video tape.
1:Rewinds video tape.
REC:Press this button together with 3 (play button) to start
recording or together with 8 to pause recording.
CHANNEL +/–:Changes the TV channels on the VCR.
to VCR.
VCR
2 Press and hold
VCR.
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.
4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Panasonic VCR:
Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
Manufacturer
JVC
Code
01, 02, 03
11, 26
29
Manufacturer
Philips
Code
09
Emerson
Fisher
RCA
05, 06
24
Samsung
Sanyo
Funai
10, 14-16
12
21-23
27, 28
30
Gold Star
Hitachi
Sharp
04
Shintom
Sony
Mitsubishi
NEC
13
18-20
08
25
Zenith
Panasonic
07, 17
5 Release
VCR.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
Turning the system on/off
On the remote control:
Press
AUDIO.
IMPORTANT
Before using the remote control for the following
operation,
On the center unit:
Press
.
AUDIO
• Set the remote control mode selector to AUDIO.
When DVD is selected as the source (see page 14), the following
messages will appear on the TV screen.
The buttons described below are used on
pages 13 to 15.
• “OPEN”/“CLOSE”:
Appears when opening or closing the disc tray.
• “NOW READING”:
Source
selecting
buttons
Appears when the system is reading the disc information.
• “REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
Remote control
mode selector
• “NO DISC”:
Appears when no disc is loaded.
• “CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
NOTE
• The STANDBY lamp goes off when the power is turned on, and the
lamp lights when the power is turned off.
• A small amount of the power is consumed even when the power is
turned off. This is called standby mode and the STANDBY lamp
lights in this mode. Unplug the power cord from the AC outlet to turn
the power off completely.
• You can also turn on the system by pressing the following buttons;
•
•
•
OPEN/CLOSE on the remote control or 0 on the center unit
One of the source selecting buttons on the remote control
3 on the center unit. You can use the same buttons on the remote
control except after pressing FM/AM.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 13 for button locations.
Basic operations
Selecting the source to
play
Listening with headphones
(not supplied)
On the remote control:
CAUTION
Be sure to turn down the volume;
Press one of the source selecting buttons
(DVD, FM/AM, AUX or AUX DIGITAL).
• Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
• Before disconnecting headphones as high volume may be suddenly
output from the speakers.
DVD:
To play back a disc (DVD VIDEO, VCD etc.). (See
page 16.)
FM/AM:
To tune in an FM or AM station. (See page 35.)
Each time you press the button, the band alternates
between FM and AM.
While connecting a pair of headphones to the PHONES jack on the
center unit, the system automatically cancels the surround mode
(see page 20) currently selected, deactivates the speakers, and
activates the headphone mode. “HEADPHONE” appears on the
display window.
AUX:
To select the source from a component connected to
the AUX IN jacks. (See page 10.)
AUX DIGITAL:To select the source from a component connected to
the DIGITAL IN jack. (See page 10.)
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are
output from the headphones.
• Multi-channel signals are down-mixed and output from the
headphones.
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
NOTE
• When a source except DVD is selected, this system does not output
video signals.
• It may take time to change the source.
Turning off the sound
temporarily [MUTING]
Press MUTING.
Adjusting the volume
[VOLUME]
To restore the sound
Perform one on the following:
• Press MUTING again.
• Press AUDIO VOL +/– (or turn VOLUME on the center unit).
CAUTION
• Always set the volume to minimum level before starting any source.
If the volume is set at its high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
Adjusting the brightness
of the indications
[DIMMER]
Press DIMMER.
Each time you press the button, the brightness level changes.
On the remote control:
Press AUDIO VOL + or –.
On the center unit:
Turn VOLUME.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 13 for button locations.
Basic operations
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Changing the scan mode
The system can be accommodated to your TV’s scan mode.
• To use the system in progressive mode, it is required that the
center unit is connected to the TV using a component video cord
(not supplied) in advance. (See page 9.)
Press SLEEP.
Each time you press the button, the shut-off time changes.
7 While DVD is selected as the source and before playback
Example:
1 Press and hold SCAN MODE for
minutes
2 seconds.
2 TPhreecsursrenCt suetrtisnog arp3pea/r2s ontothesdeislpelacytwtinhdeowd. esired
S L E E P 6 0m i n
mode.
To check the remaining time
Press SLEEP once.
• PAL:
Select when your TV supports the PAL
interlaced video input only.
• NTSC:
Select when your TV supports the NTSC
interlaced video input only.
To change the remaining time
Press SLEEP repeatedly.
• NTSC PROG.: Select when your TV equipped with
component jacks supports the NTSC
To cancel
Press SLEEP repeatedly until “SLEEP OFF” appears.
• Turning off the power also cancels the Sleep Timer.
progressive video input.
You can get better picture quality in “NTSC PROG.” mode
3 tPharneisns“PAELN” TorE“NRTSwCh” mileodet.he selected mode
Adjusting the output level
of the subwoofer and
center/surround speakers
[S.WFR, CENTER,
is shown on the display window.
When “NTSC PROG.” is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
L-SURR.-R]
Press S.WFR +/– to adjust the subwoofer.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to “PAL” or “NTSC.”
To check the compatibility of your TV, contact your local JVC
customer service center.
Press CENTER +/– to adjust the center
speaker.
Press SURR.-L +/– to adjust the surround
left speaker.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
Press SURR.-R +/– to adjust the surround
right speaker.
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. (See page 32.)
• The adjustments take effect for all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
Adjusting the treble
sound [TREBLE]
Press TREBLE +/–.
NOTE
• The adjustments take effect for all sources.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
• The mark
for.
shows the types of discs the operation is available
Basic playback
1 Press OPEN/CLOSE.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
• The system turns on and the disc
tray comes out.
AUDIO
• 0 on the center unit functions same
as OPEN/CLOSE on the remote
control.
2 Place a disc.
The buttons described below are used on pages 16 to 19.
When placing an 8 cm
(3 inches) disc
Label side up
3 Press 3 (play button).
For MP3
(play button)
Remote control
mode selector
The file control display (see page 24) appears on the TV screen.
For JPEG
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 24) appears on the TV screen.
7 To pause
Press 8.
To return to playback, press 3 (play button).
7 To stop
Press 7.
Number buttons
7 On-screen guide icons
During DVD VIDEO playback, the following guide icons may
appear for a while on the TV screen;
•
•
•
•
: appears at the beginning of a scene containing multi-
subtitle languages.
: appears at the beginning of a scene containing multi-audio
languages.
: appears at the beginning of a scene containing multi-angle
views.
(Play),
(Pause),
/
(Fast forward/
fast-reverse),
/
(Slow-motion forward/
reverse): appears when you perform each operation.
•
: the disc cannot accept an operation you have tried to do.
NOTE
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
• If you do not want the on-screen guide icons to appear, see page 33.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
MP3 disc
7 Playback information on the display window
Signal and speaker
indicators
DVD VIDEO
Example:
Track number
When a DVD VIDEO encoded with Dolby Digital 5.1ch is played
T R 1 2 3 1 2 : 3 4
Elapsed playing time
(hour:minute:second)
Chapter number
MP3 indicator
Elapsed playing time (minute:second)
(during playback only)
C 1 0 : 0 2 : 3 1
Pressing FL DISP.
Signal and speaker indicators (See page 21.)
Surround mode and digital signal format (See page 21.)
Group number
Pressing FL DISP.
MP 3 G 1 2 T 1 2 3
Title number
Chapter number
Track number
D V D T 1 C 1
JPEG disc
Group number
File number
VCD/SVCD/CD
Example:
When a CD is played back
J P G G 1 2 F 1 2 3
Signal and speaker
indicators
NOTE
Track number
• You can change the time information mode (except for MP3/JPEG).
(See page 22.)
• You can also check the playback information on the TV screen. (See
page 21.)
Elapsed playing time (minute:second)
NOTE
• “VCD” appears instead of “CD” when loading a VCD or SVCD.
• When a VCD or SVCD with PBC function is played, the elapsed
playing time does not appear, but “PBC” appears.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
7 Screen saver
Skip to the beginning of a
desired selection
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 32.
7 Using ¢/4 buttons
7 For DVD VIDEO (chapter): During
playback
For VCD/SVCD (track):
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
During playback without PBC function
For CD/MP3/JPEG (track/file): During playback or while
stopped
Press ¢ or 4 repeatedly.
7 During playback
NOTE
On the remote control:
• When playing back an MP3/JPEG disc, you can make operations
using the file control display. (See page 24.)
• This feature may not work for some discs.
Press
.
NOTE
7 Using number buttons on the remote control
• This function works in the same title.
• This feature may not work for some discs.
7 For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For VCD/SVCD (track):
Fast-forward/fast-reverse
search
During playback without PBC function
For CD/MP3/JPEG (track/file):
During playback or while stopped
7 During playback
Press number buttons (0-10, +10) to select
the desired number.
On the remote control:
Press ¡ or 1.
Each time you press the button, the search speed changes ( x 2, x 5,
x 10, x 20, x 60).
• For details on using the number buttons, see “How to use the
number buttons” below.
How to use the number buttons
To return to normal speed playback
Press 3 (play button).
To select 3:
To select 14:
To select 24:
To select 40:
Press 3.
Press +10, then 4.
Press +10 twice, then 4.
Press +10 three times, then 10.
Or press +10 four times, then 0.
On the center unit:
Press and hold ¢ or 4.
Continuously pressing ¢ or 4 increases the fast-forward/
reverse search speed ( x 5 → x 20).
NOTE
• When a DVD VIDEO, VCD, or SVCD is played back, no sound
comes out during fast-forward/reverse search.
• When a CD is played back, sound is intermittent and low during fast-
forward/reverse search.
• This feature may not work for some discs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Playback
Locating a desired title/
group using number
buttons
7 During playback or while stopped.
1 Press TITLE/GROUP.
“_ _” or “_” is shown in the title/group display area in the
display window.
Example:
During DVD VIDEO playback
_ _
T
1 : 2 3 : 4 5
2 While the display window shows “_ _”
or “_”, use number buttons (0-10, +10)
to enter the desired title or group
number.
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
NOTE
• This feature may not work for some discs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• The mark
for.
shows the types of discs the operation is available
Using the surround mode
7 Auto Surround (AUTO SURR)
The buttons described below are used on pages 20 to 30.
This function automatically selects the appropriate surround mode
according to the input signals. For example, a multichannel source
is automatically reproduced in multichannel audio.
7 Dolby Surround
Dolby Pro Logic II*1
(play button)
Remote control
mode selector
Dolby Pro Logic II has a developed multichannel playback format
to decode all 2 channel sources — stereo source and Dolby
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music
mode:
• Pro Logic II Movie (PL II MOVIE)
Suitable for reproduction of Dolby Surround encoded sources
Cursor
(3/2/Y/5)/
ENTER
bearing the mark
.
• Pro Logic II Music (PL II MUSIC)
Suitable for reproduction of any 2 channel stereo music sources.
Dolby Digital*1
Used to reproduce multichannel soundtracks of the software
Number buttons
encoded with Dolby Digital (
).
2
7 DTS Digital Surround*
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel
digital audio format available on CD and DVD software.
IMPORTANT
Before using the remote control for the following
operation;
AUDIO
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
Available Surround modes for each input signal
The B marks show available surround modes.
*1
Surround
off
Auto
DTS Digital
Surround
Manufactured under license from
Dolby Laboratories. “Dolby”,
“Pro Logic”, and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital
Surround” are registered
trademarks of Digital Theater
Systems, Inc.
Mode
Dolby Surround
PL II
DSP
Surround
SURR
OFF
AUTO
SURR
PL II
Dolby
ALL CH
Signal
DTS
—
MOVIE*3 MUSIC*3
Digital
ST.*3
Dolby Digital
(Multichannel)
B
B
B
B
—
—
B
—
*2
*3
Dolby Digital
(2 channel)
B
B
—
—
B
DTS Digital
Surround
B
B
—
—
—
B
—
You can select these modes by
pressing SURR. (See page 21.)
(Multichannel)
DTS Digital
Surround
(2 channel)
B
B
B
B
B
B
B
B
—
—
—
—
B
B
Analog (VCR) or
Linear PCM
Continued on next page
20
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
7 All Channel Stereo (DSP)
7 When playing back 2 channel source
All Channel Stereo (ALL CH ST.) mode can reproduce a larger
stereo sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo
source.
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or the DSP (ALL CH ST.) mode.
Press SURR. repeatedly to select the
desired mode.
The surround mode is turned on and the current surround mode
appears on the display window.
Normal stereo sound
All Channel Stereo
Each time you press the button, the surround mode changes.
For details on each mode, see page 20.
To turn off the surround mode
Press SURR. repeatedly until SURR OFF
appears on the display window.
7 Indicators on the display window
Digital signal format indicators
Storing adjustments — auto memory
When you turn the power off, the system memorizes the current
surround mode. The memorized mode is automatically recalled
when you turn the power on.
LPCM:
GD:
C:
Lights when Linear PCM signal comes in.
Lights when Dolby Digital signals come in.
Lights when DTS Digital (Surround) signals
come in.
NOTE
No indication:
No digital signal indicator lights when analog
signals come in.
• When FM or AM is selected as the source, you cannot select any
surround mode.
Dolby Surround/DSP mode indicators
GPLII: Lights when Dolby Pro Logic II mode is activated.
Using the on-screen bar
You can check disc information and you can use some functions
using the on-screen bar.
DSP:
Lights when All Channel Stereo mode is activated.
Source signal indicators, etc.
Light to indicate the incoming signals.
a: Lights when the front left channel signal
comes in.
Showing the on-screen bar
7 Whenever a disc is loaded
b: Lights when the center channel signal comes in.
c: Lights when the front right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes in.
h: Lights when the monaural surround channel signal or 2
channel Dolby Surround signal comes in.
Press ON SCREEN.
Each time you press the button, the on-screen bar changes as
follows on the TV screen.
SW : Always lights without the headphone mode.
Example:
During DVD VIDEO playback
The channel with “ ” shows that the corresponding speakers are
reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is reproduced, only
“
” lights.
Selecting the surround mode
The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
OFF
(The on-screen bar disappears)
(back to the beginning)
NOTE
• This function also takes effect for the sources other than DVD.
• The currently selected item shows green.
7 When playing back digital multichannel software
(except during SURR OFF mode)
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear PCM) is automatically selected.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
F Shows playback status.
appears during playback.
: appears during fast forward/reverse.
7 Contents of the on-screen bar during playback
DVD VIDEO
:
/
/
: appears during playback in forward slow-motion/
reverse slow-motion.
:
appears when paused.
:
appears when stopped.
G Select this to change time information (E). See “Changing the
time information”.
VCD
SVCD
CD
H Select this for Repeat Playback. (See page 29.)
I Select this for time search function. (See page 24.)
J Select this for chapter search function. (See page 23.)
K Select this to change audio language, channel, or stream. (See
page 26.)
L Select this to change subtitle language. (See page 26.)
M Select this to change view angle. (See page 25.)
N Shows Playback Mode status.
PROGRAM:appears during Program Playback. (See page 28.)
RANDOM:appears during Random Playback. (See page 28.)
Changing the time information
You can change the time
information in the on-screen bar on
the TV screen and the display
window of the center unit.
7 During playback
A Shows disc type.
B Shows current transfer rate (Megabits per second).
C Shows current title number.
D Shows current chapter number (for DVD VIDEO) or track
number (for other type of discs).
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
.
E Shows time information. See “Changing the time information”.
3 Press ENTER repeatedly to select the
desired information.
Example:
When elapsed playing time of disc is selected.
• TIME: Elapsed playing time of current chapter/track
• REM:
Remaining time of current chapter/track
• TOTAL: Elapsed time of disc
• T. REM: Remaining time of disc
4 Press ON SCREEN.
The on-screen bar disappears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
2 Press number buttons (1-10, +10) to
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
Playing from a specified
position on a disc
select the number of the desired item.
You can start playing a title, chapter or track you specify. You can
also play a disc from specified time.
To return to the menu
Press RETURN repeatedly until the menu screen appears.
When “NEXT” or “PREVIOUS” is shown on the TV
screen:
• To go to the next page, press x.
Locating a desired scene from the DVD
menu
DVD VIDEOs generally have their own menus which show
disc contents and you can display them on the TV screen.
You can locate a desired scene by using these menus.
• To return to the previous page, press 4.
NOTE
• If you want to play a PBC-compatible VCD/SVCD without using the
PBC function, perform any of the following:
7 Whenever a DVD VIDEO is loaded
•
•
Start playback by pressing number buttons while stopped.
Press x repeatedly until the desired track number is displayed,
then start playback by pressing 3 (play button).
The track number appears on the display window instead of
“PBC”.
1 Press TOP MENU or MENU.
The menu appears on the TV screen.
Example:
• To activate the PBC function when playing a PBC-compatible VCD/
SVCD without using the PBC function, perform any of the following:
•
Press TOP MENU or MENU.
•
Press 7 twice to stop playback, then press 3 (play button).
Locating a desired chapter using the on-
screen bar
Normally, a DVD VIDEO which contains more than one title
will have a “top” menu which lists the titles. Press
TOP MENU to show the title menu.
Some DVD VIDEO may also have a different menu which is
shown by pressing MENU.
7 During playback
See the instructions for each DVD VIDEO regarding its
2 pUarstieculCarumresnuo.r 3/2/Y/5 to select a
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
desired item.
3 Press ENTER.
• With some discs, you can also select items by entering the
corresponding number using number buttons.
Locating a desired scene using a VCD/
SVCD menu with PBC
4 Press number buttons (0-9) to enter the
desired chapter number.
Example:
A VCD or SVCD recorded with PBC has its own
menus such as a list of contained songs. You can
locate a specific scene by using these menus.
To select 8:
To select 10:
To select 37:
Press 8.
Press 1, then 0.
Press 3, then 7.
7 During playback with PBC function
1 Press RETURN repeatedly until the
To correct a misentry
Repeat step 4.
menu appears on the TV screen.
Example:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
5 Press ENTER.
Using the file control
display
6 Press ON SCREEN.
The on-screen bar disappears.
You can search and play desired groups and
tracks/files using the file control display on the
TV screen.
NOTE
• You can select up to the 99th chapter.
Current group / total group Playback mode (PROGRAM,
Locating a desired position by specifying
the time
You can locate a desired position by specifying the time from the
beginning the disc (while stopped) or the current title/track (during
playback).
number
RANDOM, REPEAT)
Tag information
(for MP3 only)
Elapsed playing time of current
track (for MP3 only)
7 For DVD VIDEO:
During playback
For VCD/SVCD:
While stopped or during playback without PBC function
For CD:
During playback or while stopped
7 When specifying the elapsed playing time from the
beginning of the disc
Perform the following procedure while stopped.
7 When specifying the elapsed playing time from the
beginning of current title/track
Perform the following procedure during playback.
Current group
Current track (file)
1 Press ON SCREEN twice.
Current track (file) / total track
(file) number on current group
Total track (file)
number on disc
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
Playback status
The file control display appears automatically during playback (for
MP3) or while stopped.
4 Use number buttons (0-9) to enter the
time.
You can specify the elapsed playing time from the beginning
of the disc (while stopped) or from the beginning of the current
title/track (during playback).
Example:
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)
elapsed
Press 2
Press 4
Press 3
Press 0
Press 8
To cancel a misentry
5 PPrersessCsursEorN2TrEepRea.tedly.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• You can specify time in hours/minutes/seconds for DVD VIDEO and
in minutes/seconds for VCD/SVCD/CD.
Continued on next page
24
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
7 For MP3:
During playback or while stopped
For JPEG:
Selecting a view angle
1WPhirleesstosppCedursor 3/2/Y/5 to select the
7 During playback of a disc containing multi-view angles
When using the ANGLE button:
desired group/track/file.
1 Press ANGLE.
• For MP3, playback starts from the selected track.
Example:
2 •PrFeorsJsPE3G, p(ropcleaedytobpuertftoormnt)heoforllEowNinTgEopRer.ation.
The first view angle is selected out of 3 view angles recorded.
• Track playback/slide-show starts from the selected track/
file.
• When you press ENTER for JPEG, only the selected file is
played back.
2 Press ANGLE repeatedly or Cursor Y/
5 to select the desired view angle.
To skip the file during playback
Press x/4 or Cursor 5/Y.
NOTE
When using the on-screen bar:
• You can also check playback information on the display window.
(See page 17.)
• Some group, track and file names may not be displayed correctly
depending on recording conditions.
• The order of groups, tracks and files may be displayed differently
from the order displayed on your personal computer.
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
Resume Playback
When Resume Playback is set to “ON”
(see page 33) and you stop playback by the
following operations, the position where
playback has been stopped is stored. (“RESUME” appears on the
display window.)
4 Press Cursor Y/5 to select the desired
view angle.
• Turning off the power (see page 13)
• Pressing 7 once
• Changing the source (see page 14)
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
To start playback from the stored position
(“RESUME” disappears.)
• Press 3 (play button) on the remote control or the center unit.
• Select DVD as the source again if you changed the source.
To clear the stored position
Press 7 again or open the disc tray.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
Selecting the subtitle
Selecting the audio
7 During playback of a disc containing subtitles in
7 During playback of a disc containing
several languages
audio in several languages
When using the SUBTITLE button:
When using the AUDIO button:
1 Press SUBTITLE.
1 Press AUDIO.
Example (DVD VIDEO):
Example (DVD VIDEO):
“ENGLISH” is selected out of 3 subtitle languages recorded.
“ENGLISH” is selected out of 3 audio languages recorded.
2 Press AUDIO repeatedly or Cursor Y/5
2 Press Cursor Y/5 to select the desired
to select the desired audio.
subtitle.
For SVCD
When using the on-screen bar:
• An SVCD can contain up to four subtitles. Pressing
SUBTITLE changes the subtitles regardless of whether the
subtitles are recorded or not. (Subtitles will not change if no
subtitle is recorded.)
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
NOTE
• Each time you press SUBTITLE, the subtitle appears and
disappears alternately.
When using the on-screen bar:
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
4 Press Cursor Y/5 to select the desired
audio.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 31.)
• “ST”, “L” and “R” is displayed when playing a VCD or SVCD
respectively representing “stereo”, “left sound” and “right sound”.
4 Press Cursor Y/5 repeatedly to select
the desired subtitle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 31.)
• Each time you press SUBTITLE, the subtitle appears and disappears
alternately.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
Changing the VFP setting
Special picture playback
The VFP (Video Fine Processor)
function enables you to adjust the
picture character according to the
type of programming, picture tone or personal preference.
Frame-by-frame playback
7 During playback
7 During playback
Press 8 repeatedly.
Each time you press the button, the still
picture advances by one frame.
1 Press VFP.
The current VFP settings appear on the TV screen.
Example:
To return to normal playback
Press 3 (play button).
Playing back in slow-motion
7 During playback
1 Press 8 at the point where you want to
2 Press Cursor 3/2 repeatedly to select
start playback in slow-motion from.
the VFP mode.
2 PThreessysstemypaus.es playback.
• NORMAL:Normally select this.
• CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP to
complete the setting.
• USER 1 and USER 2:
• Playback in forward slow-motion starts.
For DVD VIDEO only:
• To play back in reverse slow-motion, press 1.
You can adjust parameters that affect picture appearance.
Each time you press the button, the playback speed become
faster.
Only when selecting “USER 1” or “USER 2” in step
2, proceed to perform the following operation;
To return to normal playback
Press 3 (play button).
3 Press Cursor Y/5 repeatedly to select
a parameter you want to adjust.
NOTE
Adjust gradually and confirm picture appearance results are as
preferred.
• Sound cannot be heard during slow-motion playback.
• GAMMA:
Controls brightness of neutral tints while maintaining
brightness of dark and bright portions.
• BRIGHTNESS:
Controls screen brightness.
• CONTRAST:
Zooming in
7 During playback or while
paused
Controls screen contrast.
• SATURATION:
Controls screen color depth.
• TINT:
Controls screen tint.
• SHARPNESS:
1 Press ZOOM.
2 WEachhitlimeezyoouopmresesdZOinO,Mp, srceensesmCagunirfiscaotiorn3cha/n2ges/Y. /
5 to move zoom-in area.
Controls screen sharpness.
To return to normal playback
Press ZOOM repeatedly to select OFF.
NOTE
• The number of the magnification steps varies depending on the disc
type.
• During slide-show playback of a JPEG disc, zooming in is not
available. In such a case, press 8 to pause slide-show playback, then
zoom in.
• During playback of JPEG, there may be a case where Cursor (3/2/
Y/5) does not work in step 2.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
To clear the programs one by one from the last
entered number
Press CANCEL repeatedly.
4 Press ENTER.
Example:
To clear all programs
Press 7.
You can also clear the program by turning off the system.
5 Press Cursor Y/5 to change the
3 Press 3 (play button) to start Program
setting.
Playback.
6 Press ENTER.
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
7 TRhee pcuerraentt sVtFePpsesttin3gstoapp6eatroagaaind.just other
To check the program contents
During playback, press 7. Playback stops and the program window
appears.
parameters.
8 Press VFP.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and “RANDOM” disappears from the TV screen.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
NOTE
• The Resume function cannot be used with Program Playback.
• Program Playback may not work for some discs.
Program Playback
7 While stopped
Random Playback
You can play titles or tracks
on a disc in random order.
1 Press PLAY MODE repeatedly until
program window appears on the TV
screen.
7 While stopped
1 Press PLAY MODE repeatedly until
“RANDOM” appears on the TV screen.
2 Press 3 (play button).
After playing all titles/tracks on the disc, the system stops
playback and quits the Random mode.
To quit the Random mode
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.
While stopped, press PLAY MODE repeatedly until both program
window and “RANDOM” disappear from the TV screen.
You can also clear the Random mode by turning off the system.
2 Follow the instructions that appears on
the TV screen to program the desired
chapters/ tracks.
NOTE
• The same title/track will not be played back more than once during
Random Playback.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
• The content’s numbers that you have to specify for
programming varies depending on the disc type:
•
•
•
DVD VIDEO:
VCD, SVCD, CD:
MP3:
Titles and chapters
Tracks
Groups and tracks
• You can specify the chapters/tracks whose number is up to
99.
• (For CD, SVCD or VCD) When the total playback time
exceeds 99 minutes 59 seconds, “–:–” will appear on the
display window. But, it is possible to continue
programming.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
When using the on-screen bar (except for MP3/
JPEG disc):
Repeat Playback
1 Press ON SCREEN twice.
Repeating the current selection
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
7 For DVD VIDEO:
During playback
For VCD/SVCD:
During playback without PBC function
For CD/MP3/JPEG:
During playback or stopped
When using the REPEAT button:
4 Press Cursor Y/5 repeatedly to select
Press REPEAT.
the Repeat mode.
C 1 1 : 3 1 : 0 1
5 Press ENTER.
6 Press ON SCREEN.
Repeat mode indicator
The on-screen bar disappears.
Each time you press REPEAT, the Repeat mode changes.
To cancel Repeat Playback
Select “OFF” in step 4.
Display
window
TV screen
Meanings
Repeats the current group for
MP3/JPEG disc.
Repeating a desired part [A-B Repeat]
You can repeat playback of a
desired part by specifying the
beginning (point A) and ending
(point B).
REPEAT GROUP
Repeats the current title for
DVD VIDEO.
Repeats all tracks/files for
VCD/SVCD/CD/MP3/JPEG
disc.
ALL
1
7 During playback
REPEAT ALL
When using the A-B RPT button:
Repeats the current track for
VCD/SVCD/CD/MP3 disc.
REPEAT TRACK,
REPEAT STEP
1 Press A-B RPT at the beginning of the
part you want to repeat (point A).
Repeats the current chapter for
DVD VIDEO.
The repeat mode indicator “
” appears on the display
REPEAT STEP
2 wPirnedosws. A-B RPT again at the end of the
Repeat mode is off.
The system plays back the disc
normally.
No
indication
part you want to repeat (point B).
The repeat mode indicator on the display window changes to
“
” and A-B Repeat Playback starts. The selected
NOTE
part of the disc (between point A and B) is played repeatedly.
• For DVD VIDEO, REPEAT ALL may not be available depending on
the disc.
To cancel
Press A-B RPT during A-B Repeat Playback.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Advanced operations
When using the on-screen bar:
Sound and other settings
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
NOTE
• This function also takes effect for the sources other than DVD.
• Before you start operation;
There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1 Press SETTING.
Example:
4 Press Cursor Y/5 repeatedly to select
B A L : C E N T E R
“A-B”.
5 Press ENTER at the beginning of the
2 Press Cursor Y/5 to select the item
part you want to repeat (point A).
you want to set.
• BAL (Balance):
You can adjust the balance between the front left and front
right speakers.
• DEC (Decode):
6 Press ENTER at the end of the part you
When you play an external source (AUX DIGITAL is
selected as a source) that was encoded with Dolby Digital or
DTS Digital Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters
or tracks.
AUT (Auto)/PCM:Normally select this. The system
automatically detects the incoming signals.
DOLBY D: Select this if the symptoms above occur
when playing a disc (or software) encoded
with Dolby Digital.
want to repeat (point B).
7 AP-rBeRsespeOat PNlaySbCackRsEtarEtsN. .
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
DTS:
Select this if the symptoms above occur
when playing a disc (or software) encoded
with DTS Digital Surround.
• A. POS (Audio Position):
Tray lock
You can lock the tray and prohibit the unwanted disc ejection.
Set the audio position of subwoofer so that the subwoofer
level can be automatically adjusted properly. (The smaller
the number becomes, the more the level decreases
automatically when listening in stereo.)
On the center unit ONLY:
While the system is turned off
3 Press Cursor 3/2 to make an
adjustment or selection.
Example:
--
Press and hold
B A L : R
5
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
The adjustment display automatically disappears a few
seconds later with the current setting.
NOTE
• When “DOLBY D” or “DTS” is selected, if a signal encoded with
another digital format comes in, you cannot listen to the sound. (The
GDIGITAL or C indicator flashes.)
To cancel
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display
window.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
NOTE
Using the setup menus
• See the following “The language codes list” for the code of each
language, such as “AA”, etc.
• You can change the language used in the setup menus. See
“Menu description”.
The language codes list
Basic operation on the setup menus
AA Afar
IK Inupiak
IN Indonesian
IS Icelandic
IW Hebrew
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
IMPORTANT
Before using the remote control for the
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
following operation;
AUDIO
1 Set the remote control mode selector to
JI
Yiddish
AUDIO.
2 Press DVD.
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
JW Javanese
KA Georgian
KK Kazakh
SG Sangho
SH Serbo-Croatian
SI Singhalese
SK Slovak
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
Cursor
(3/2/Y/5)/
ENTER
SL Slovenian
SM Samoan
SN Shona
BI Bislama
BN Bengali, Bangla KU Kurdish
SO Somali
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
KY Kirghiz
LA Latin
SQ Albanian
SR Serbian
SS Siswati
LN Lingala
LO Laothian
LT Lithuanian
7 While stopped
ST Sesotho
SU Sundanese
1 Press SET UP.
CY Welsh
LV Latvian, Lettish SV Swedish
DA Danish
DZ Bhutani
EL Greek
MG Malagasy
MI Maori
SW Swahili
TA Tamil
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
TE Telugu
TG Tajik
EO Esperanto
ET Estonian
EU Basque
FA Persian
FI Finnish
FJ Fiji
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
MS Malay (MAY)
MT Maltese
2 Follow the instructions that appears on
FO Faroese
FY Frisian
GA Irish
MY Burmese
NA Nauru
the TV screen.
NE Nepali
GD Scots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
NL Dutch
Menu description
NO Norwegian
OC Occitan
TW Twi
UK Ukrainian
UR Urdu
OM (Afan) Oromo
OR Oriya
:Language menu (LANGUAGE)
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
HI Hindi
PA Panjabi
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
• Select the initial menu language*.
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
PL Polish
PS Pashto, Pushto
PT Portuguese
QU Quechua
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
• Select the initial audio language*.
RM Rhaeto-Romance ZU Zulu
7 SUBTITLE
Some DVDs have multiple subtitle languages.
• Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
• Select the language shown on the TV screen when operating this
system.
* When the language you have selected is not recorded to a disc,
the original language is automatically used as the initial
language.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
:Audio menu (AUDIO)
7 D. RANGE COMPRESSION
:Picture menu (PICTURE)
7 MONITOR TYPE
You can select the monitor type to match your TV when you play
DVDs recorded in the picture’s height/width ratio of 16:9.
• 16:9/16:9 MULTI (Wide television conversion)
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
(Dynamic range compression)
You can enjoy low level recorded sound clearly at night even at a
low volume when listening to the sound with Dolby Digital.
• AUTO
Select this when you want to enjoy surround sound with its
full dynamic range (no effect applied).
• ON
Select this when you want to fully apply the compression
effect (useful at midnight).
• 4:3 LB/4:3 MULTI LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars appear on the top and the bottom of the screen.
• 4:3 PS/4:3 MULTI PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars do not appear, however, the left and right edges of
the pictures will not be shown on the screen.
NOTE
• When you play a multichannel Dolby Digital source with the
surround mode is off, the setting of D. RANGE COMPRESSION is
set to ON automatically.
:Speaker setting menu
(SPK. SETTING)
Ex.: 16:9
Ex.: 4:3 LB
Ex.: 4:3 PS
NOTE
7 Level menu (LEVEL)
• Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size may
become “4:3 LB” or “4:3 MULTI LB” with some DVDs. This
depends on how DVDs are recorded.
• When selecting “MULTI” options as the monitor type for the multi-
color system TV, the system outputs PAL or NTSC video signal
according to the disc, regardless of the scan mode setting (see page
15).
CENTER SPEAKER/SURROUND LEFT SPEAKER/
SURROUND RIGHT SPEAKER/SUB WOOFER
Adjust the output level of related speakers.
TEST TONE*
Outputs the test tone.
RETURN
7 PICTURE SOURCE
Returns to the SPK. SETTING menu.
When you set the scan mode to PROGRESSIVE (see page 15), you
can obtain optimal picture quality by selecting whether the content
on the disc is processed by field (video source) or by frame (film
source).
* The test tone comes out of all of the activated speakers in the
following sequence:
s Front left speaker s Center speaker s Front right
speaker s Surround right speaker s Surround left
speaker s (back to the beginning)
Normally set to “AUTO”.
• AUTO
Used to play a disc containing both video and film source
materials.
This system recognizes the source type (video or film) of the
current disc according to the disc information.
• If the playback picture is unclear or noisy, or the oblique
lines of the picture are rough, try to change to other modes.
• FILM
Suitable for playing back a film source disc.
• VIDEO
Suitable for playing back a video source disc.
7 SCREEN SAVER (See page 18.)
You can activate or deactivate Screen Saver function.
7 FILE TYPE
When both MP3 files and JPEG files are recorded on a disc, you
can select which files to play.
After changing FILE TYPE setting, be sure to turn the power off,
then turn the power on to enable the new setting.
• AUDIO
Select this to play MP3 files.
• STILL PICTURE
Select this to play JPEG files.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
7 Distance menu (DISTANCE)
7 Parental lock menu (PARENTAL LOCK)
You can restrict playback of a DVD VIDEO containing violent
scenes that is not suitable for your other family members.
• This setting takes effect only for DVDs containing the Parental
Lock level information — Level 1 (most restrictive) to Level 8
(least restrictive).
Example:
Center
speaker
Subwoofer
Front right
3.0 m
2.7 m
2.4 m
2.1 m
COUNTRY CODE
Front left
Select this when you set the code for your resident. (See
page 34.)
SET LEVEL
Select this when you set the level of restriction.
PASSWORD
This item is selected automatically when some changes
are made on Parental Lock setting. Enter a four-digit
number as your password with number buttons 0-9, then
press ENTER.
Surround left
Surround right
• If you have failed to enter your correct password three
times, you cannot select an item other than EXIT. In such a
case, press ENTER to exit the mode, then try the setting
again.
In this case, set the distance of each speaker as follows;
• Distance of front speakers:
• Distance of center speaker:
3.0 m
2.7 m
EXIT
• Distance of surround speakers: 2.4 m
Returns to OTHERS menu.
FRONT SPEAKER/CENTER SPEAKER/SURROUND
SPEAKER
Adjust the distance from the listening position to the speakers.
Within the range from 0.3 m to 9.0 m by 0.3 m.
• Be sure to exit the Parental Lock setting mode after
entering your password. Otherwise, the changes you made
won’t be stored.
• If you forget your password, enter “8888” instead of your
password.
RETURN
Returns to the SPK. SETTING menu.
NOTE
• When you enter wrong passwords three times, you can select “EXIT”
only.
:Other setting menu (OTHERS)
7 RESUME (See page 25.)
You can activate or deactivate Resume Playback function.
7 ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons. (See page
16.)
7 AV COMPULINK MODE
You must set this item correctly to use the AV COMPU LINK
system. (See page 37.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
Country/Area codes list for Parental Lock
AD Andorra
ER Eritrea
ES Spain
RW Rwanda
Lao People’s Democratic
Republic
LA
AE United Arab Emirates
AF Afghanistan
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
ET Ethiopia
LB Lebanon
AG Antigua and Barbuda
FI
FJ
Finland
Fiji
LC Saint Lucia
AI
Anguilla
LI
Liechtenstein
AL Albania
FK Falkland Islands (Malvinas)
LK Sri Lanka
LR Liberia
SE Sweden
AM Armenia
SG Singapore
SH Saint Helena
Micronesia (Fedelated States
FM
of)
AN Netherlands Antilles
AO Angola
LS Lesotho
FO Faroe Islands
FR France
LT Lithuania
LU Luxembourg
LV Latvia
SI
SJ
Slovenia
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
Svalbard and Jan Mayen
FX France, Metropolitan
GA Gabon
SK Slovakia
LY Libyan Arab Jamahiriya
MA Morocco
SL Sierra Leone
SM San Marino
GB United Kingdom
GD Grenada
AU Australia
MC Monaco
SN Senegal
AW Aruba
GE Georgia
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
SO Somalia
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
GF French Guiana
GH Ghana
SR Suriname
ST Sao Tome and Principe
SV El Salvador
GI
Gibraltar
BD Bangladesh
BE Belgium
GL Greenland
GM Gambia
MM Myanmar
MN Mongolia
MO Macau
SY Syrian Arab Republic
SZ Swaziland
BF Burkina Faso
BG Bulgaria
GN Guinea
TC Turks and Caicos Islands
TD Chad
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
MP Northern Mariana Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
BH Bahrain
TF French Southern Territories
TG Togo
BI
BJ
Burundi
Benin
TH Thailand Code Language
South Georgia and the South
Sandwich Islands
GS
BM Bermuda
TJ
Tajikistan
BN Brunei Darussalam
BO Bolivia
GT Guatemala
GU Guam
MU Mauritius
MV Maldives
TK Tokelau
TM Turkmenistan
TN Tunisia
BR Brazil
GW Guinea-Bissau
GY Guyana
MW Malawi
BS Bahamas
MX Mexico
TO Tonga
BT Bhutan
HK Hong Kong
MY Malaysia
TP East Timor
TR Turkey
BV Bouvet Island
BW Botswana
BY Belarus
MZ Mozambique
NA Namibia
Heard Island and McDonald
Islands
HM
TT Trinidad and Tobago
TV Tuvalu
HN Honduras
HR Croatia
HT Haiti
NC New Caledonia
NE Niger
BZ Belize
TW Taiwan
CA Canada
NF Norfolk Island
NG Nigeria
TZ Tanzania, United Republic of
UA Ukraine
CC Cocos (Keeling) Islands
CF Central African Republic
CG Congo
HU Hungary
ID
IE
IL
IN
IO
IQ
IR
IS
Indonesia
Ireland
Israel
NI
Nicaragua
UG Uganda
NL Netherlands
NO Norway
NP Nepal
United States Minor Outlying
Islands
UM
CH Switzerland
CI
Côte d’Ivoire
India
US United States
CK Cook Islands
CL Chile
British Indian Ocean Territory NR Nauru
UY Uruguay
Iraq
NU Niue
UZ Uzbekistan
CM Cameroon
CN China
Iran (Islamic Republic of)
NZ New Zealand
OM Oman
VA Vatican City State (Holy See)
Iceland
Italy
Saint Vincent and the
Grenadines
VC
CO Colombia
CR Costa Rica
CU Cuba
IT
PA Panama
JM Jamaica
PE Peru
VE Venezuela
JO
JP
Jordan
Japan
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
VG Virgin Islands (British)
CV Cape Verde
CX Christmas Island
CY Cyprus
VI
Virgin Islands (U.S.)
KE Kenya
VN Vietnam
KG Kyrgyzstan
KH Cambodia
VU Vanuatu
CZ Czech Republic
DE Germany
DJ Djibouti
PL Poland
WF Wallis and Futuna Islands
WS Samoa
KI
Kiribati
PM Saint Pierre and Miquelon
PN Pitcairn
KM Comoros
YE Yemen
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
KN Saint Kitts and Nevis
PR Puerto Rico
PT Portugal
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
Korea, Democratic People’s
Republic of
KP
PW Palau
KR Korea, Republic of
KW Kuwait
PY Paraguay
QA Qatar
EC Ecuador
ZR Zaire
EE Estonia
KY Cayman Islands
KZ Kazakhstan
RE Réunion
ZW Zimbabwe
EG Egypt
RO Romania
EH Western Sahara
RU Russian Federation
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
Manual tuning
AUDIO
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
1 Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
The buttons described below are used on pages 35 and
36.
8 1 0 k
2 Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
Remote control
mode selector
NOTE
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
Number buttons
Setting the AM tuner
interval spacing
Some countries space AM stations 9 kHz apart, and some countries
use 10 kHz spacing.
You can only change the AM tuner interval spacing while
selecting AM as the band.
• You can operate the following procedures using the buttons on
the front panel.
7 To change the interval spacing into 10 kHz
Press ¢ while holding down 7.
7 To change the interval spacing into 9 kHz
Press 4 while holding down 7.
NOTE
• 9 kHz is the initial setting.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 35 for button locations.
Tuner operations
Preset tuning
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
Selecting the FM
reception mode
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
7 To preset the stations
7 While listening to an FM station
1 Tune in the station you want to preset.
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
• AUTO MUTING:
When a program is broadcast in stereo, you will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations. The AUTO
MUTING indicator lights on the display window.
• MONO:
• If you want to store the FM reception mode for an FM
station, select the reception mode you want. See “Selecting
the FM reception mode”.
Example:
When the system is tuned in to 103.50 MHz.
1 0 3 . 5 0M
2 Press MEMORY.
Reception will be improved although you will lose the stereo
effect. (The ST indicator goes off.) In this mode, you will hear
noise until you are tuned in to a station. (The AUTO MUTING
indicator also goes off.)
_ _
1 0 3 . 5 0 M
While “– –” are flashing:
3 Press number button(s) (1-10, +10) to
select a preset number you want.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.)
Example:
When the preset channel 1 is selected.
1 1 0 3 . 5 0 M
If the setting is cancelled before you finish, start from step 2
again.
While the selected number is flashing:
4 Press MEMORY.
The selected number stops flashing.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
5 aRgaeinp.eat steps 1 to 4.
• Storing a new station to a used number erases the previously
stored one.
7 To tune in to a preset station
1 Press FM/AM repeatedly to select FM or
AM.
2 Press number button(s) (1-10, +10) to
select a preset number.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 18.).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or
IMPORTANT
audio with the simplest operation. If your video/audio player (such
as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and
are tied with the JVC AV COMPU LINK cable(s), simply starting
the player will automatically make all necessary settings on the
television and/or amplifier/receiver to allow you to enjoy the
playback.
When you make video connection between the player and another
device (such as a TV) via the composite, S-video or component
jacks, as well as AV COMPU LINK connection, see also the
instruction manual of the other device.
Notes for connection
• There may be no description about connections to the player in
the instruction manual of a television or VCR. However, a
television or VCR with AV COMPU LINK terminals indicating
“II,” “EX” or “III” can be connected to the player.
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/
or audio by simply pressing Play on the source component (the
component which plays back the video or audio, such as a DVD
player or VCR). You do not even have to switch on power on the
TV.
Connection and setup
Using an AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
• The center unit setting for AV COMPU LINK is controlled using
the OTHERS menu in the preference display (see page 33).
• Refer also to the instruction supplied with your TV or VCR.
1 Turn on the main power of the
television.
2 Insert a disc (or tape) into the source
Center unit
component.
3 Press 3 of the source component.
TV
The following actions are performed automatically:
• Turning on the television power.
• Setting the source of the television to the external input
(VIDEO-1, VIDEO-2 or VIDEO-3).
• If you connect the center unit to a television via AV COMPU
LINK, set the center unit’s AV COMPU LINK setting as follows.
•
•
•
When connecting to the VIDEO-1 input terminal of the
television: DVD2
When connecting to the VIDEO-2 input terminal of the
television: DVD3
When connecting to the VIDEO-3 input terminal of the
television: DVD1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
References
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
Maintenance
• DO NOT use any solvent — such as
conventional record cleaner, spray,
thinner or benzine — to clean the
disc.
7 Handling Discs
• Remove the disc from its case by holding it
at the edge while pressing the center hole
lightly.
• Do not touch the shiny surface of the disc
or bend the disc.
• Put the disc back in its case after use to
prevent warping.
7 Cleaning the system
• Stains on the system should be wiped off with a soft cloth. If the
system is heavily stained, wipe it with a cloth soaked in water
diluted neutral detergent and wrung well, then wipe clean with a
dry cloth.
• Be careful not to scratch the surface of the
disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes and moisture.
• Since the system may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
•
•
•
•
•
DO NOT wipe it with a hard cloth.
DO NOT wipe it strong.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substance such as insecticides to it.
DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
The power cord is not connected.
SOLUTION
Power does not come
on.
Connect the power cord correctly. (See page 10.)
The remote control does The batteries are exhausted.
not work.
Replace the batteries. (See page 6.)
Sunlight is falling directly on the remote sensor.
Hide the remote sensor from direct sunlight.
The remote control does The remote control mode is not for the desired source. Before operation, press one of the source selecting
not work as expected.
buttons for the desired source.
The position of the remote control mode selector is
incorrect.
Set the selector to the correct position.
No sound.
The speaker cord is not connected.
Check the connection. (See page 8.)
The audio cord is not connected to AUX IN and/or
DIGITAL IN correctly.
Connect the cord correctly. (See page 10.)
An incorrect source has been selected.
The decode mode is not set correctly.
Select the correct source. (See page 14.)
Select the proper decode mode. (See page 30.)
Connect the cord correctly. (See page 9.)
Use a playable disc. (See page 3.)
No picture is displayed The video cord is not connected correctly.
on the TV screen.
The disc is not playable.
No picture is displayed The scan mode is set to “NTSC PROG.” though the
Change the scan mode to “PAL” or “NTSC.” (See page
15.)
on the TV screen, the
center unit is connected to the TV which does not
picture is blurred, or the support the progressive video input.
picture is divided into
two parts.
Video and audio are
distorted.
The disc is scratched or dirty.
Replace or clean the disc.
A VCR is connected between the center unit and the
TV.
Connect the center unit and TV directly. (See page 9.)
The picture does not fit The monitor type is not set correctly.
the TV screen.
Set “MONITOR TYPE” properly. (See page 32.)
Hard to listen to
broadcast because of
noise.
Antennas are disconnected.
Reconnect the antennas correctly and securely. (See
page 7.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
References
7 Front / Center speakers (SP-THS1F)
Specifications
Type:
1-Way Bass-Reflex Type
(Magnetically-shielded Type)
8.0 cm cone M 1
Speaker:
Power Handling Capacity: 55 W
7
Center unit (XV-THS1)
Audio section
Impedance:
6 C
Front/Center/Surround:
52 W per channel, RMS at 6 C at 1
kHz, with 10 % total harmonic
distortion.
52 W, RMS at 6 C at 100 Hz, with
10 % total harmonic distortion.
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
80.0 dB/W·m
Subwoofer:
106 mm M 119.5 mm M 102 mm
Digital input*1:
Mass:
0.49 kg each
OPTICAL DIGITAL IN:
–21 dBm to –15 dBm (660 nm E30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
7 Surround speakers (SP-THS1S)
1
Type:
1-Way Bass-Reflex Type
(Magnetically-shielded Type)
Video section
Video System:
Horizontal Resolution:
Signal-to-Noise Ratio:
Video output level
Composite:
Speaker:
8.0 cm cone M 1
NTSC/PAL
500 lines
64 dB
Power Handling Capacity: 55 W
Impedance:
6 C
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
80 dB/W·m
1.0 V(p-p)/75 C
S-video-Y:
S-video-C:
Component-Y:
1.0 V(p-p)/75 C
106 mm M 119.5 mm M 102 mm
0.286 V (0.3 V*2)(p-p)/75 C
1.0 V(p-p)/75 C
Mass:
0.56 kg each
Component-PB/PR:
For PAL system
0.7 V(p-p)/75 C
7 Subwoofer (SP-WS1)
*2
Type:
1-Way Bass-Reflex Type
Tuner section
Tuning Range
FM:
(Magnetically-shielded Type)
Speaker:
16.0 cm cone M 1
87.50 MHz to 108.00 MHz
531 kHz to 1602 kHz
(at 9 kHz cannel spacing)
530 kHz to 1600 kHz
Power Handling Capacity: 55 W
AM:
Impedance:
6 C
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
30 Hz to 150 Hz
76 dB/W·m
(at 10 kHz cannel spacing)
128 mm M 284 mm M 337 mm
3.3 kg
General
Power Requirements:
Mass:
AC 110 V/ AC 127 V/ AC 220 V/
AC 230-240V
, 50/60 Hz
Power Consumption:
75 W (at operation)
1.0 W (in standby mode)
Designs & specifications are subject to change without notice.
Dimensions (W
Mass:
M
H
M
D): 360 mm
5.3 kg
M
65 mm
M
370 mm
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EN, AR, PE
© 2004 Victor Company of Japan, Limited
0804TMMMDWJEM
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Infinity Portable Speaker INFH1390 User Manual
Insignia Home Theater System NS H4005 User Manual
JBL Stereo Amplifier S7150 User Manual
JL Audio Stereo Amplifier 300w User Manual
Jonsered Brush Cutter GT2125L User Manual
JVC Car Stereo System KD ADX44 User Manual
JVC Projection Television HD Z56RX5 User Manual
JVC VCR TC35KL3P User Manual
Kenwood Car Video System KDC MP342U User Manual
King Canada Saw 8339 User Manual