JVC Flat Panel Television PD 42WV74 User Manual

Plasma Display Users Guide  
For Model:  
PD-42WV74  
TV CATV VCR DVD  
ASPECT  
MULTI SCREEN  
INDEX  
SPLIT  
FREEZE  
SWAP SELECT  
INPUT  
V1  
1
2
3
4
1
4
2
5
8
0
3
6
INPUT  
V2  
INPUT  
V3  
7
9
RETURN+  
TV  
INPUT  
V4  
100+  
THEATER NATURAL VIDEO  
CINEMA STATUS  
DIGITAL-IN PRO  
D-IN  
SLEEP TIMER DISPLAY SOUND  
+
LIGHT  
MUTING  
C.C.  
C.C.  
CH  
VOL  
VOL  
OK  
CH  
MENU  
BACK  
VCR CHANNEL  
PREV NEXT  
VCR DVD  
POWER TV VCR  
REW  
PLAY  
FF  
REC  
STOP  
PAUSE  
OPEN CLOSE  
STILL PAUSE  
RM-C13G  
Illustration of PD-42WV74 and RM-C13G  
Important Note:  
In the spaces below, enter the model and serial number of your television  
(located at the rear of the television cabinet). Staple your sales receipt or invoice  
to the inside cover of this guide. Keep this user’s guide in a convenient place for  
future reference. Keep the carton and original packaging for future use.  
Model Number:  
LCT1517-001B  
0903-KT-CR-VP  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
As an ENERGY STAR partner,  
JVC has determined that this  
product or product model meets the  
®
ENERGY STAR guidelines for energy  
efficiency.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturers  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are provided for your safety.  
If the provided plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16) Avoid improper installation and never position the unit where good ventilation is  
impossible. When installing this TV, distance recommendations must be maintained  
between the set and the wall, as well as inside a tightly enclosed area or piece of  
furniture. Keep to the minimum distance guidelines shown for safe operation.  
8 inch/200 mm  
6 inch/150 mm  
6 inch/150 mm  
2 inch/50 mm  
2 inch/50 mm  
4 inch/100 mm  
4 inch/100 mm  
4 inch/100 mm  
4 inch/100 mm  
17) Cautions for installation  
Do not tilt the TV towards the left or right, or towards the back.  
Install the TV in a corner on the floor so as to keep cords out of the way.  
The TV will generate a slight amount of heat during operation. Ensure that sufficient space  
is available around the TV to allow satisfactory cooling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
Burn-in  
A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long  
time causes a part of the image to stay on the screen (this is called phosphor burn-in).  
Avoid burn-in as follows.  
IMAGE SHIFT  
The picture displayed on the screen is shifted up, down and to the left and right at regular  
intervals. In order to prevent burn-in, set this function to FAST or STD. (Refer to page 43.)  
Even if the IMAGE SHIFT function is turned off, the picture will shift to the left or right when the  
channel or input is changed. This is only when the ASPECT function is in REGULAR mode.  
VIDEO STATUS  
The VIDEO STATUS function is initially set to DYNAMIC. Unless the TV is being watched in an  
extremely bright room, it is recommended to change the VIDEO STATUS setting to standard,  
theater or game. Doing so will reduce the chance of PDP burn-in and extend the life of the  
PDP. (Refer to page 56).  
Do not display static images or characters for long periods of time.  
While an image is displayed  
With power OFF  
19:03  
19:03  
Burn-in example  
Reduce PICTURE and BRIGHT on the PICTURE ADJUST menu (page 47) when viewing.  
Do not view for long periods of time in the REGULAR mode (page 58).  
Screen size is normally chosen to ensure that the picture is displayed on the entire screen.  
After viewing in the REGULAR mode in which black bands may occur at the left and right of  
the screen, it is recommended to change to the PANORAMA mode to display the picture on  
the entire screen.  
While an image is displayed  
With power OFF  
Burn-in example  
Do not view for long periods of time using the SPLIT function (page 52) or INDEX  
function (page 53).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
If Burn-in has occurred  
If burn-in occurs, try the BURN-IN IMAGE REDUCER function (page 48). If burn-in is minimal it  
may gradually become less noticeable.  
Note: Once burn-in occurs it will never disappear completely.  
Point defects  
PDPs use collections of fine pixels to display images. While there is no problem with more than  
99.99% of these pixels, please understand that a very small number of pixels may not light or  
may light all the time.  
Do not install the TV near electronic equipment that is susceptible to electromagnetic  
waves  
It may cause interference in images, sound, etc. In particular, keep video equipment away from  
this product.  
Effect on infrared devices  
There may be interference while using infrared devices such as infrared cordless headphones.  
The phenomenon described below is not a malfunction.  
If the television is used at a location above an altitude of 2,000 m, a buzzing noise and image  
distortion may occur. This phenomenon is peculiar to PDP (Plasma Display Panel), and could  
occur with any television using PDP. It is not a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Quick Setup . . . . . . . . . . 8  
Sound Adjust . . . . . . . . 49  
Unpacking your TV . . . . . . . . . . . . 8  
Attaching the stand to the TV . . . . . . . 9  
TV/Receiver . . . . . . . . . . . . . . . 10  
TV Remote Control . . . . . . . . . . . 11  
Getting Started . . . . . . . . . . . . . 12  
Set Up Your TV . . . . . . . . . . . . 12  
The Remote Control . . . . . . . . . . 14  
Connections . . . . . . . . . . . . . . . 16  
Connecting Your Devices . . . . . . . 16  
Plug-In Menu . . . . . . . . . . . . . . 23  
The Interactive Plug In Menu . . . . . 23  
Sound Settings . . . . . . . . . . . . . 49  
Adjust Sound Settings . . . . . . . . 49  
MTS (Multi-Channel Television Sound) . 49  
Clock/Timers . . . . . . . . 50  
Set Clock . . . . . . . . . . . . . . . . 50  
On/Off Timer . . . . . . . . . . . . . . . 51  
Button Functions . . . . . . 52  
Multi Screen Function . . . . . . . . . . 52  
Split . . . . . . . . . . . . . . . . . . . 52  
Index . . . . . . . . . . . . . . . . . . . 53  
Freeze . . . . . . . . . . . . . . . . . . 53  
Swap . . . . . . . . . . . . . . . . . . 53  
Select . . . . . . . . . . . . . . . . . . 53  
Power . . . . . . . . . . . . . . . . . . 54  
Number Buttons . . . . . . . . . . . . . 54  
100+ Button . . . . . . . . . . . . . . . 54  
Input . . . . . . . . . . . . . . . . . . . 54  
Digital-In . . . . . . . . . . . . . . . . . 54  
Return +/TV . . . . . . . . . . . . . . . 55  
Sound . . . . . . . . . . . . . . . . . . 55  
Muting . . . . . . . . . . . . . . . . . . 56  
Video Status . . . . . . . . . . . . . . . 56  
Natural Cinema . . . . . . . . . . . . . 56  
TheaterPro D6500K . . . . . . . . . . . 56  
Sleep Timer . . . . . . . . . . . . . . . 57  
Display . . . . . . . . . . . . . . . . . . 57  
Aspect . . . . . . . . . . . . . . . . . . 58  
Aspect Ratios . . . . . . . . . . . . . 58  
C.C. . . . . . . . . . . . . . . . . . . . 59  
Menu . . . . . . . . . . . . . . . . . . 59  
OK . . . . . . . . . . . . . . . . . . . . 59  
Back . . . . . . . . . . . . . . . . . . . 59  
TV/CATV Slide Switch . . . . . . . . . . 60  
VCR/DVD Slide Switch . . . . . . . . . 60  
VCR Buttons . . . . . . . . . . . . . . . 60  
DVD Buttons . . . . . . . . . . . . . . . 60  
Light . . . . . . . . . . . . . . . . . . . 60  
Remote Programming . . . . 26  
Setting CATV, VCR and DVD Codes . . 26  
Cable box or Satellite Codes . . . . . 26  
VCR Codes . . . . . . . . . . . . . . 27  
DVD Codes . . . . . . . . . . . . . . 28  
Search Codes . . . . . . . . . . . . . 29  
Onscreen Menus . . . . . . 30  
Using the Guide . . . . . . . . . . . . . 30  
The Onscreen Menu System . . . . . . 31  
Initial Setup . . . . . . . . . 33  
Auto Tuner Setup . . . . . . . . . . . . 33  
Channel Summary . . . . . . . . . . . . 33  
V-Chip . . . . . . . . . . . . . . . . . . 34  
Set Lock Code . . . . . . . . . . . . . 40  
Auto Demo . . . . . . . . . . . . . . . 41  
Power Indicator . . . . . . . . . . . . . 41  
Position Adjustment . . . . . . . . . . . 41  
Digital-In . . . . . . . . . . . . . . . . . 42  
TV Speaker . . . . . . . . . . . . . . . 42  
Audio Out . . . . . . . . . . . . . . . . 43  
Image Shift . . . . . . . . . . . . . . . 43  
Language . . . . . . . . . . . . . . . . 43  
Closed Caption . . . . . . . . . . . . . 44  
Noise Muting . . . . . . . . . . . . . . 44  
Front Panel Lock . . . . . . . . . . . . 45  
V1 Smart Input . . . . . . . . . . . . . 45  
Auto Shut Off . . . . . . . . . . . . . . 46  
XDS ID . . . . . . . . . . . . . . . . . . 46  
Appendices  
Troubleshooting . . . . . . . . . . . . . 61  
Warnings . . . . . . . . . . . . . . . . 63  
Warranty . . . . . . . . . . . . . . . . . 64  
Authorized Service Centers . . . . . . . 66  
Specifications . . . . . . . . . . . . . . 67  
Picture Adjust . . . . . . . . 47  
Picture Settings . . . . . . . . . . . . . 47  
Adjust Picture Settings . . . . . . . . 47  
Color Temperature . . . . . . . . . . . . 47  
Digital Noise Clear . . . . . . . . . . . . 48  
Color Management . . . . . . . . . . . 48  
Burn-in Image Reducer . . . . . . . . . 48  
Reset . . . . . . . . . . . . . . . . . . 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items.  
Receiver  
TV  
AA/R06-size batteries  
(used to check operation)  
System cable  
Remote control  
Ferrite core × 1  
Power cord  
Screw (A) × 2  
Screw (B) × 6  
Screw (C) × 4  
Cable clamp × 1  
Cover × 2  
Stand × 1  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Attaching the stand to the TV  
Read the following instructions and then attach the supplied stand to the TV.  
WARNING:  
The TV is heavy. It should always be carried by at least two people.  
Attempting to carry it by yourself may lead to it being dropped causing  
injuries and damage.  
Required items: Phillips screwdriver  
1. Attach the screws (A) to the back of the TV.  
Screw (A)  
2. Attach the TV to the stand.  
Insert the heads of the screws (A) into the top  
of the stand bar and temporarily secure the TV  
to the stand.  
Stand  
3. Secure the TV to the stand with the screws (B).  
Screw (B)  
Screw (B)  
Cover  
4. Insert the cover to the stand and fix with the  
screws (C).  
Screw (C)  
Cable clamp  
5. Remove the paper from the bottom of the cable  
clamp and attach the cable clamp to the stand.  
Clamp the system cable and power cord using the  
cable clamp after connecting the system cable and  
the power cord to the TV.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV/Receiver  
NOTE: Before you connect your receiver to another device, please refer to the proper  
diagrams for your specific TV and remote.  
Display Front  
Refer to the pages in parentheses for details.  
1
2
3
4
5
6
7
Remote control sensor  
Power lamp (page 15)  
MENU button (pages 32)  
INPUT button (page 54)  
VOL (Volume) -/+ buttons  
CH -/+ buttons (page 14)  
POWER button  
Receiver Front  
How to open the cover  
S-VIDEO  
VIDEO  
L/MONO  
AUDIO  
R
POWER  
OVER  
INPUT-4  
Refer to the pages in parentheses for details.  
1
2
3
INPUT-4 terminal (pages 20)  
POWER button (page 15)  
Power lamp (page 15)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Remote Control  
TV CATV VCR DVD  
ASPECT  
MULTI SCREEN  
INDEX  
SPLIT  
FREEZE  
SWAP SELECT  
INPUT 1  
V1  
1
4
2
5
8
0
3
6
9
INPUT 2  
V2  
INPUT 3  
V3  
7
RETURN+  
INPUT 4  
100+  
TV  
V4  
THEATER NATURAL VIDEO  
DIGITAL-IN  
PRO  
CINEMA STATUS  
D-IN  
SLEEP TIMER DISPLAY SOUND  
+
LIGHT  
MUTING  
C.C.  
C.C.  
CH  
VOL  
VOL  
OK  
CH  
MENU  
BACK  
VCR CHANNEL  
PREV NEXT  
VCR DVD  
POWER TV VCR  
REW  
PLAY  
FF  
REC  
STOP  
PAUSE  
OPEN CLOSE  
STILL PAUSE  
RM-C13G  
RM-C13G  
For information on remote control buttons, see pages 52-60.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Getting Started  
These quick setup pages will provide you, in four easy steps, with the basic information you  
need to begin using your new television right away.  
If you have questions, or for more detailed information on any of these steps, please consult  
other sections of this manual.  
STEP 1 - Set Up Your TV  
Caution  
Turn off all equipment (including the TV) before connecting anything.  
Connection Diagram  
TV (back)  
DISPLAY INPUT  
CONNECT TO SYSTEM CABLE  
AC 120V  
Cable supplied  
with TV  
Supplied system cable  
Refer to page 13  
for connection  
details.  
Refer to page 13 for  
connection details.  
SUB  
WOOFER  
OUT  
AUDIO OUT  
R-AUDIO  
-L  
V
DIGITAL
Pb  
Pr  
Pb  
Pr  
DISPLAY OUT(SYSTEM CABLE)  
AV  
COMPULINK  
Cable supplied with receiver  
Receiver (back)  
Refer to page 13 for connection details.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Use the supplied power cord which best  
suits the area in which you live.  
Connecting the TV and  
receiver  
Back of the TV  
Power cord  
AC INLET  
Use the supplied system cable to connect  
the TV to the receiver.  
AC INLET  
The two connectors are of different shapes.  
Ensure that the pins on connector 1 are  
oriented correctly, press the connector into  
the socket, and tighten the screws at left  
and right to lock it in place.  
Power cord  
Back of the receiver  
Press connector 2 firmly into place until it  
is locked.  
Insert the AC plug into a correctly grounded  
outlet.  
Remove the AC plug from the outlet to  
completely disconnect the TV from the  
power supply.  
2
1
Receiver rear  
Disconnecting the system  
cable  
SUB  
WOOFER  
OUT  
AUDIO OUT  
R-AUDIO  
-L  
VIDEO  
DIGITAL IN  
Pb  
Pr  
Pb  
Pr  
DISPLAY OUT(SYSTEM CABLE)  
AV  
COMPULINK  
Release connector 1 by unscrewing the  
screws at left and right and removing it from  
the socket.  
Release connector 2 by removing it from  
the socket while pressing the release  
bottoms on either side.  
1
2
Connecting the power cord  
to the AC outlet  
Insert the AC plugs on the power cords from  
the TV and receiver into AC outlets.  
Caution  
Operate only from the power source  
specified (AC 120V, 60 Hz) on the unit.  
Failure to use the supplied power cord or  
to insert it into a correctly grounded outlet  
may result in electric shocks.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Step 2 – The Remote Control  
Before you can operate your remote  
control, you first need to install the  
batteries (included).  
Slide the cover on the back of the  
remote down towards the bottom of  
the remote control. Insert two batteries  
(included) carefully noting the +and  
“–” markings, placing the “–” end in  
the unit first. Slide the cover back into  
place.  
When you change the batteries, try to complete the task within three minutes. If you  
take longer than three minutes, the remote control codes for your VCR, DVD, and/or  
cable box/satellite receiver may have to be reset. See pages 26-29.  
Key Feature Buttons  
The four key feature buttons at the center of the remote  
can be used for basic operation of the television. The top  
and bottom buttons will scan forward and back through  
the available channels. To move rapidly through the  
channels using JVCs Hyperscan feature, press and hold  
CH+ or CH. The channels will zip by at a rate of five  
channels per second. The right and left buttons will turn  
the volume up or down. These buttons are also marked  
with four arrows and are used with JVCs onscreen menu  
system. To use the onscreen menus, press the MENU  
button.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Basic Operation  
Turn the television on and off by pressing the POWER button at the top right  
corner of the remote. If this is the first time you are turning on the TV, the  
interactive plug-in menu appears.  
Turn on the TV after connecting it to the other surrounding devices. (Refer to  
page 16.)  
Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 26 to 29 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
Display front  
Remote control  
sensor  
Power lamp  
Receiver front  
POWER  
POWER button  
Power lamp  
When the TV is off, the TV and TUNER power lamps do not light. When the TV is on, the  
TV and TUNER power lamps light. However, when the POWER INDICATOR in the MENU  
is set to OFF, the power lamps do not light even when the TV is on. (Refer to POWER  
INDICATORon page 41)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Step 3 Connecting Your Devices  
To make these connections, you will use plugs like the ones illustrated below.  
Coaxial Cables  
Ferrite core (accessory)  
Component Cables  
Composite Cables  
Audio Cables  
Used to connect audio/video  
devices like VCRs, DVD  
players, stereo amplifiers, game  
consoles, etc.  
Used to connect an external  
antenna or cable TV system  
to your receiver.  
S-Video Cable  
Attach the ferrite core to the coaxial cable. Using  
it without the ferrite core may lead to noise  
(interference).  
Attach the ferrite core as close to the receiver  
as possible.  
Used to make video connections  
with S-Video VCRs, Camcorders  
and DVD players.  
Please follow the flow chart below to determine which connection setup is right for you. Then,  
refer to the appropriate diagrams to connect your receiver to other devices that you may have.  
After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
A VCR is not necessary for operation of the television. If you follow these diagrams and the  
television does not work properly, contact your local cable operator.  
To connect a DVD player, see Diagram #3. A DVD player is optional.  
If you have a satellite television system, please refer to the satellite TV manual.  
Do you use a Cable TV Box?  
Yes  
No  
Do you have a VCR?  
Do you have a VCR?  
Yes  
No  
Yes  
No  
Diagram #2 Diagram #1  
Diagram #3 Diagram #1  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Diagram #1  
Note:  
If you do not have a cable box, connect the cable wire from the wall outlet into the back of  
the receiver.  
Diagram #2  
Notes:  
Use the S-Video connection if possible for superior picture quality.  
Your VCR must be turned on to view premium cable channels.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Notes:  
Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the users manual for your DVD player for more information.  
Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #3  
Pb  
Pr  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to JVC AV Compu Link  
JVCs AV compu link feature makes playing video tapes or DVDs totally automatic. Simply  
insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player  
and the device will automatically turn on and begin playback. At the same time, using the  
AV compu link, the VCR or DVD player sends a signal to the television telling it to turn on  
and switch to the proper video input.  
The AV compu link cable may be included with the JVC AV compu link unit you  
wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or  
AV Compu Link can only be used with JVC brand products.  
To Connect: Plug one end of the AV compu link cable  
into the AV COMPU LINK INPUT on your VCR, DVD, or  
AV Compu Link Cable  
other compu link device. Plug the other end of the AV  
compu link cable into the AV COMPU LINK at the rear  
of the receiver.  
Note:  
The AV compu link cable has a male 3.5 mm (mono)  
plug on each end.  
AV  
COMPULINK  
Notes:  
In order for the VCR playback to begin automatically, the recording tabs must be removed  
from the VHS tape. If the tab is in place, automatic switching will occur when you push the  
VCRs PLAY button.  
If your JVC brand VCR has A code/B code remote control switching(see your VCRs  
instruction book), using VCR A code will switch the TV to input 1.  
Refer to your DVD instruction book for detailed connection information.  
To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see  
the receiver connection instructions for detailed connection information.  
AV compu link is compatible with select AV compu link receivers.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the front input jacks (Input 4) located under the front panel door. To access, pull on the door  
to open it. You can also connect these using the televisions rear input jacks, using the same  
instructions.  
S-VIDEO  
AUDIO  
L/MONO  
VIDEO  
R
OVER  
INT-4  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the receiver, OR connect an S-Video cable from the front of the receiver to the  
camcorder.  
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the  
LEFT AUDIO IN on the front of the receiver.  
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the  
RIGHT AUDIO IN on the front of the receiver.  
Note:  
If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to  
the LEFT AUDIO IN on the front of the receiver.  
Connecting to an External Amplifier  
Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home  
theater system. Simply connect the subwoofer to the back of the receiver.  
SUB  
WOOFER  
OUT  
AUDIO OUT  
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the  
receiver to the LEFT AUDIO INPUT on the amplifier.  
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the  
receiver to the RIGHT AUDIO INPUT on the amplifier.  
3) Connect a black composite cable from the SUBWOOFER OUT on the back of the receiver  
to the LINE INPUT of the subwoofer.  
Notes:  
Refer to your amplifiers manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Digital TV Receiver w/HDCP  
By inputting a high bandwidth digital content protection high definition picture source to the  
digital-in terminal of this television, high-definition pictures can be displayed on the screen in  
their digital form. (This terminal is for use in the future when high bandwidth digital content  
protection DTV decoders and DVD players and D-VHS are put on the market.)  
After the connections  
have been made,  
tighten the screw to  
secure the cables.  
R-AUDIO  
-L  
VIDEO  
DIGITAL IN  
DTV decoder  
1) Connect the DTV DIGITAL RGB OUTPUT TERMINAL to the DIGITAL INPUT TERMINAL of  
the receiver, and then tighten the 2 screws.  
2) Connect the DTV decoder LEFT AUDIO OUTPUT to the DIGITAL-IN LEFT AUDIO INPUT.  
3) Connect the DTV decoder RIGHT AUDIO OUTPUT to the DIGITAL-IN RIGHT AUDIO  
INPUT.  
The Digital-In terminal can only be used with 1080i, 720p and 480p picture signals. Set  
the DTV decode digital-out terminal output setting to 1080i, 720p or 480p. For detailed  
information, refer to the DTV decoder instruction manual. If you can not display the picture  
because your DTV decoder does not have a digital-out terminal output setting, use the  
component video input (or the S-Video input or video input). Refer to page 18. In this case  
the picture will be displayed as an analog signal.  
The digital-in terminal is not compatible with the picture signal of a personal computer.  
Use a DVI-D single link 19-pin cable (commercially available) in order to digitally connect  
the receiver with a DTV decoder.  
If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may  
be slightly shifted. In cases such as this, the horizontal balance can be adjusted by accessing  
DIGITAL-INin the INITIAL SETUP menu. (Refer to page 42.)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an AV Receiver using your television’s  
V1 Smart Input  
By connecting your AV Receiver to your television's V1 smart Input, you can watch picture  
sources from many diffeent devices, without having to change or use the other input  
connections on your TV. This allows you to free up other input connections so you can  
connect more devices to your television.  
AV Receiver  
Receiver Rear Panel  
MONITOR  
OUT  
Y
PB  
Pb  
Pr  
Pb  
Pr  
P
R
MONITOR OUT  
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1  
on the back of your receiver.  
2) Connect a Yellow Component Cable from the AV Receiver's MONITOR OUT, into the  
VIDEO INPUT-1 on the back of your receiver.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-1 on the back of your receiver.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the PB  
VIDEO INPUT-1 on the back of your receiver.  
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the PR  
VIDEO INPUT-1 on the back of your receiver.  
Notes:  
Please refer to your AV Receiver instruction manual for more information on connecting  
your speakers and other devices like a DVD player.  
Use your AV Receiver's remote to switch to the diferent devices you have connected.  
Some AV Receiver's may not respond when the V1 Smart Input funcion is turned on.  
If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V1 input as the V1 Smart Input. In this case we recommend using the  
S-Video connection.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Step 4 The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear.  
The plug-in menu helps you to get your TV ready to use by letting you set your preferences  
for:  
The language in which you want the onscreen menus to appear.  
Setting the TVs clock to the correct time so your timer functions will work properly. You can  
choose AUTOor MANUALfor setting the clock.  
The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Language  
After the JVC INTERACTIVE PLUG IN MENUhas been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: English, French (Français) or Spanish (Español).  
¥Š  
To choose a language:  
(English, Français or Español)  
To NEXT (To set clock)  
(To be continued...)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Clock Set  
Before you use any of your TVs timer functions, you must first set the clock. You  
may precisely set your clock using the XDS time signal broadcast by most public  
broadcasting stations. If you do not have this in your area, you will have to set the clock  
manually. See manual clock set below. To set the clock using the XDS signal:  
¥Š  
To choose AUTO  
To TIME ZONE  
¥Š  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
¥Š  
To NEXT (To Auto Tuner Setup)  
Notes:  
The Daylight Savings Time feature automatically adjusts your TVs clock for Daylight  
Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The  
clock will move back one hour at 2:00 am on the last Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
¥Š  
‚ꢀ  
To choose MANUAL  
To TIME  
¥Š  
To set the hour  
To minute  
¥Š  
To set the minute  
To Start Clock  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when  
you scan (using the CHANNEL +/buttons) you will receive only clear, active channels.  
¥Šꢀꢀ  
ꢀ  
To START  
NOW  
PROGRAMMING !  
48  
Programming will take approximately  
1 to 2 minutes.  
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can  
continue on in this guide for more information on programming your remote control, or using  
the JVC onscreen menu system to customize your television viewing experience.  
Notes:  
Noise muting will not work during Auto Tuner Setup.  
Skip appears only for interactive plug-in menu.  
The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case, use the menu to perform these settings. See pages 43, 50 and 33.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may,  
(depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner  
memory. This is normal.  
The Quick Setup is complete  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Setting the CATV, VCR and DVD Codes  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond  
to any of the codes listed below or to the code search function, use the remote control  
supplied by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to CATV.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the  
10 key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
If your cable or satellite box does not respond to the first code, try the others listed. If it  
does not respond to any code, try the search codes function, on page 29.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to TVand the other 2-way selector switch to VCR.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the  
10 key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
If your VCR does not respond to the first code, try the others listed. If it does not respond  
to any of the codes, try the search codes function on page 29.  
After you program your remote, some VCR buttons may not work properly. If so, use the  
VCRs remote.  
To record, hold down the REC button on the remote and press PLAY.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to TVand the other 2-way selector switch to DVD.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the  
10 key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 29.  
After you program your remote, some DVD buttons may not work properly. If so, use the  
DVD players remote.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press and hold down the POWER button, then press the RETURN+/TV button for more than  
three seconds.  
3) Release the RETURN+/TV button, then release the POWER button.  
4) Press the POWER button on the remote, and see if the cable or satellite box responds.  
5) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use  
the remote control that came with your equipment.  
6) Press RETURN+/TV to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to TVand the other 2-way selector switch to VCR”  
or DVD.  
2) Press and hold down the VCR or DVD POWER button, then press the RETURN+/TV button for  
more than three seconds.  
3) Release the RETURN+/TV button, then release the VCR or DVD POWER button.  
4) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
5) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
6) Press RETURN+/TV to exit.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
›‚ Up and Down arrows mean press the CH+ or CHbuttons. Pressing the CH+ or CH–  
buttons let you:  
Move vertically in a main menu screen  
Move through a submenu screen  
Move to the next letter, number, or other choice in a submenu  
Back up to correct an error  
Scan through TV channels (when not in a menu screen)  
¥Š Left and right arrows mean press the VOLUME+ or VOLUMEbuttons to move left or right  
to:  
Select a highlighted menu item  
Select an item in a submenu  
Select numbers in certain menu options  
Turn the volume up or down (when not in a menu screen)  
The press buttonicon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The helping arrowicon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item that  
appears in green is the one currently selected. If you use the Menu button on the TVs front  
panel instead of the remote, an additional menu screen showing INPUT and ASPECT will  
appear between INITIAL SETUP and PICTURE ADJUST. The interactive plug-in menuwill  
appear the first time the TV is plugged in.  
Note:  
Menus shown in this book are illustrations, not exact replications of the televisions  
onscreen displays.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVCs onscreen menu system. The onscreen menus let you make  
adjustments to your televisions operation simply and quickly. Examples of the onscreen  
menus are shown on the next page. Detailed explanations on using each menu follow later in  
this guide. For information about the interactive plug-in Menu, see pages 23-25.  
The Onscreen Menu System  
To open the onscreen menu system, press the MENU button on the remote control. You  
navigate within the onscreen menus by using the four directional arrow buttons on the  
remote control. (These buttons are also the CH +/and VOL +/buttons. Channel and volume  
functions will not operate when the onscreen menu is active).  
The selected feature and option on a menu screen are highlighted in a different color.  
Selected Option  
(Green)  
Selected Option  
(Blue)  
To move to a different feature use the ›‚ arrows to move up or down the list. When you  
press the up arrow at the top of the list or the down arrow at the bottom, the next menu  
screen will appear. Use the arrows ¥ꢀŠꢀto select an option from the highlighted feature.  
Pressing MENU on the remote control will close the onscreen menu system and return you to  
normal television viewing.  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
If you do not press any buttons for about a minute, the onscreen menu will automatically  
shut off.  
Button names in this guide are shown in SMALL CAPITAL LETTERS.  
Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
INITIAL SETUP 03  
INITIAL SETUP 04  
PICTURE ADJUST 01  
PICTURE ADJUST 02  
INITIAL SETUP 02  
INITIAL SETUP 01  
SOUND ADJUST  
Notes:  
CLOCK/TIMERS  
The DIGITAL-IN menu can only be displayed  
when a 480p picture signal is input to the  
digital-in terminal and the picture is being  
displayed on the screen.  
When the Menu button on the TV front panel  
is pressed, the FRONT PANEL CONTROL  
menu between INITIAL SETUP 03 and  
PICTURE ADJUST 01 will appear.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
›‚ꢀ  
¥Šꢀ  
¥Šꢀꢀ  
To AUTO TUNER SETUP  
To operate  
To choose CABLE or AIR  
Press the OK button to start  
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the  
message PROGRAMMING OVER! appears onscreen.  
Press the Menu button when finished  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV.  
You can add or delete channels from the line-up or prevent any unauthorized viewers from  
watching any or all 181 channels.  
Press the MENU button  
›‚ꢀ  
To CHANNEL SUMMARY  
To operate  
¥Š  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an . You can  
delete channels from the scan by removing the . If any  
channels were missed during auto tuner setup and you wish  
to add them, you may by placing an next to the channel  
number.  
¥Š To the SCAN column  
Press the OK button to include or delete from scan  
Press the MENU button when finished  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
›‚  
To CHANNEL SUMMARY  
To operate  
¥Š  
¥Š To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the MENU button when finished  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the Lock Code using the 10 key pad.  
If the wrong code is entered, the message INVALID LOCK CODE!will flash on the screen.  
The channel cannot be accessed until the correct  
code is entered.  
THIS CHANNEL IS LOCKED BY  
CHANNEL GUARD.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
Notes:  
Once a channel has been unlocked, it will  
remain unlocked until the television is turned  
off.  
See also Set Lock Code, page 40.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 37 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings.  
You can use US V-Chip settings (for programming broadcast from the United States),  
Canadian V-Chip settings (for programming broadcast from Canada), and movie ratings. You  
may use any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for  
setting each of the three V-Chip formats appear in the next six pages along with descriptions  
of the rating categories.  
To access the rating categories:  
Press the MENU button  
›‚ꢀ  
To V-CHIP  
¥Šꢀ  
will appear)  
¥Šꢀ  
›‚ꢀ  
SET MOVIE RATINGS, or SET CANADIAN RATINGS  
(see following pages for descriptions of each item)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
Unrated Programmingcategory.  
Examples of Unrated programs:  
Emergency Bulletins  
News  
Public Service Announcements  
Sports  
Locally Originated Programming  
Political Programs  
Religious Programs  
Weather  
Some Commercials  
Note:  
TV programs or movies that do not have rating signals will be blocked if the unrated  
category is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
›‚ꢀ  
To V-CHIP  
To operate (The lock icon  
¥Šꢀ  
appears)  
Press ZERO to access V-Chip setup options  
›‚ꢀ  
To UNRATED  
¥Šꢀ  
To VIEW or BLOCK  
Press MENU when done  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be  
able to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or  
no violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of  
content are also supplied with the V-Chip rating. These types of content may also be  
blocked. The content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
›‚ꢀ  
To V-CHIP  
To operate (The lock icon  
¥Šꢀ  
appears)  
Press ZERO to access the V-Chip menu  
¥Šꢀ  
›‚ꢀ  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the ꢀꢀor ¥Š to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the icon appears instead of a .  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once youve put a lock on the top row, everything in that column  
is automatically locked.  
¥Š  
To the TV 14 Column  
Press the OK button to lock  
Press the MENU button when finished  
Note:  
If you want to change the setup, move the cursor to the top  
column and change the lock icon to “—” by pressing OK  
again. You may then select individual categories to block.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur  
producers who didnt intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including  
childrens programming, foreign programs, or adult material.  
G General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating  
may include more explicit sexual, language, and violence content than movies rated PG.  
R Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
›‚ꢀ  
To V-CHIP  
To operate (The lock icon  
¥Šꢀ  
appears)  
Press ZERO to access V-Chip setup options  
To SET MOVIE RATINGS  
›‚ꢀ  
¥Šꢀ  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
¥Š  
To the X Column  
Press the OK button to lock  
To the NC-17 Column  
¥Š  
Press the OK button to lock  
Press the MENU button to finish  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens  
and early teens. Programming may contain mature themes and scenes of intense violence.  
18+ Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
›‚ꢀ  
To V-CHIP  
To operate (The lock icon  
¥Šꢀ  
appears)  
Press ZERO to access V-Chip setup options  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
›‚ꢀ  
¥Šꢀ  
For example:  
To block viewing of programming rated 14+ and 18+:  
¥Š  
To the 18+ Column  
Press the OK button to lock  
To the 14+ Column  
¥Š  
Press the OK button to lock  
Press the MENU button to finish  
Note:  
For instructions on SET CANADIAN RATINGS FRE (in French), please see page 39 in the  
French side of this users guide.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
pre-set with a lock code of 0000. You may change the code to any four-digit number you  
wish. To change the lock code, follow the steps below.  
Press the MENU button  
›‚ꢀ  
To SET LOCK CODE  
To operate (The lock icon  
Press ZERO to access the lock code  
¥Š  
appears)  
The first digit will be highlighted  
¥Š  
›‚  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
Press the OK button to finish (your lock code is now set)  
Press the Menu button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
After a power interruption you must reset the lock code.  
Write your lock code number down and keep it hidden from potential viewers.  
If you forget the lock code, a new code may be set using the steps listed above.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Demo  
This function lets you preview the many different viewing modes of your TV. It will cycle  
through index, split demo, freeze, all of the different aspectratios and all of the  
different video statusmodes.  
Press the MENU button  
›‚ꢀ  
To AUTO DEMO  
¥Šꢀ  
Notes:  
To turn AUTO DEMO ON or OFF  
Auto demo starts 2 seconds after it is set to ON.  
To stop auto demo, press the MENU button, and select  
auto demo by pressing the ‚ꢀ buttons, and turn it off by pressing the ¥Šꢀbuttons. Press  
the MENU button to finish.  
Power Indicator  
Power indicator allows you to adjust the brightness of  
the power indicator.  
Press the MENU button  
›‚ꢀ  
To POWER INDICATOR  
¥Š  
To adjust POWER INDICATOR LOW, HIGH or  
OFF  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama, cinema, or full.  
Press the MENU button  
›‚ꢀ  
To POSITION ADJUSTMENT  
To enter  
¥Šꢀ  
¥Šꢀ To adjust the position  
Press the MENU button to finish  
Notes:  
To reset the adjustment to the center, press the OK button.  
When the arrow disappears, while you are adjusting the position, the position is at its  
maximum limit.  
If you select regular size with aspect or Multi Screen, position adjustment option is not  
seen.  
When you change the screen size, perform the position adjustment again.  
Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set HD panorama or cinema zoom for 1080i signal.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital-In  
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture  
signal is being input to the DIGITAL-IN terminal.  
This option adjusts the position when a 480p picture signal is being displayed on the screen.  
There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is  
slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.  
Press the MENU button  
›‚ꢀ To DIGITAL-IN  
¥ŠꢀꢀꢀꢀꢀTo enter  
¥ŠꢀꢀꢀꢀꢀTo select SIZE1 or SIZE2  
Press the MENU button to finish  
Note:  
The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
Digital-In terminal and the picture is being displayed on the screen.  
TV Speaker  
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the  
audio through your stereo.  
Press the MENU button  
›‚ꢀ  
To TV SPEAKER  
¥Šꢀ  
To turn the TVs speakers ON or OFF  
Press the MENU button when finished  
Notes:  
Before you turn the TV speaker setting from OFF to ON, make sure that the TV volume  
level is low! If the TV volume is set too high, the sound level will be extremely loud.  
After a power interruption, the TV speaker settings will return to ON.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Audio Out  
If your television is connected to an external speaker source, audio out gives you the option of  
controlling the volume level with your TVs remote control.  
Press the MENU button  
›‚  
To AUDIO OUT  
To VARI or FIX  
¥Š  
Press the MENU button when finished  
VARI: Lets you adjust the volume of the external speakers  
using the VOLUME +/buttons on your TVs remote control.  
FIX: The volume of the external speakers is adjusted using  
the audio devices remote control.  
Image Shift  
The picture displayed on the screen is shifted up, down and to the left and right at regular  
intervals. In order to prevent burn-in, set this function to FAST or STANDARD.  
Press the MENU button  
›‚ꢀ  
To IMAGE SHIFT  
¥Šꢀ  
To select the mode STD (STANDARD), FASTor  
OFF”  
Press the MENU button when finished  
OFF:  
STD:  
FAST:  
IMAGE SHIFT is turned off.  
The picture is shifted every 30 minutes.  
The picture is shifted every 10 minutes.  
Language  
The language function is described on page 23 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the Menu button  
›‚ꢀ  
To LANGUAGE  
¥Š  
To choose a language: ENG. (English), FRAN.  
(French) or ESP. (Spanish)  
Press the MENU button when finished  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television  
can access and display this information using the closed caption feature. To activate the  
closed caption feature, follow the steps below.  
Press the MENU button  
›‚ꢀ  
¥Š  
›‚  
¥Š  
To CLOSED CAPTION  
To operate  
To select CAPTION or TEXT  
To select a caption (CC1 to CC4) or text channel  
(T1 to T4)  
Press the OK button to save  
Press the MENU button when finished  
Notes:  
Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
Most broadcasts containing closed captioning will display a notice at the start of the  
program.  
To select the mode, press the C.C. button. See page 59.  
Noise Muting  
This feature inserts a blank gray screen over channels which  
are not broadcasting or are too weak to be received clearly.  
Press the MENU button  
›‚  
To NOISE MUTING  
¥Š  
To turn noise muting ON or OFF  
Press the MENU button when finished  
Note:  
Noise muting will not work during auto tuner setup or when you operate channel summary.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
›‚  
To FRONT PANEL LOCK  
To turn ON or OFF  
¥Š  
Press the MENU button when finished  
You can turn off this feature in the following ways:  
Unplug the power cord, and plug it back in. Do this if  
your batteries die, or you lose your remote control.  
Use the remote control.  
Press the MENU button on the front of the TV for more than 3 seconds. In this case, the  
OSD for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will  
remain ON.  
V1 Smart Input  
This feature is used if you have connected an AV Receiver to your television. By turning this  
feature on, your television can automatically detect the signal source from your components  
that are connected to your AV Receiver. Refer to page 22 for how to connect an AV receiver to  
your television.  
Press the MENU button  
›‚  
To V1 SMART INPUT  
¥Š  
To turn ON or OFF  
Press the MENU button when finished  
Notes:  
If you do not have an AV Receiver connected to your television, turn this feature OFF. By  
doing so, you can take advantage of using AV CompuLink components with your television.  
Some AV Receivers may not work with this function.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
Press the MENU button  
›‚  
To AUTO SHUT OFF  
¥Š  
To turn ON or OFF  
Press the MENU button when finished  
If the channel that you have on does not receive a  
signal for more than one minute, the blinking text  
NOT RECEIVING A SIGNALappears on the screen, and  
starts the countdown. If no signal is being received within  
10 minutes, the TV shuts itself off.  
XDS ID  
XDS ID Display provides a channels call letters, the networks name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
Press the MENU button  
›‚  
To XDS ID  
¥Š  
To turn ON or OFF  
Press the MENU button when finished  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a  
darker or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Adjust the Picture Settings  
Press the MENU button  
›‚ꢀ  
To TINT, COLOR, PICTURE, BRIGHT or  
DETAIL  
¥ꢀŠ  
To enter  
¥ꢀŠ  
To adjust the setting  
›‚  
To move to the next setting  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
›‚  
To COLOR TEMPERATURE  
To enter  
¥Š  
¥Š  
To set LOW or HIGH  
Press the MENU button when finished  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Digital Noise Clear  
With digital noise clear, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
›‚  
¥Š  
›‚  
To DIG. NOISE CLEAR  
To enter  
To select the mode LOW, HIGHor OFF”  
Press the MENU button when finished  
Color Management  
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated  
to produce natural hues.  
Press the MENU button  
›‚  
¥Š  
›‚  
To COLOR MANAGEMENT  
To enter  
To select the mode VIVD, STDor OFF”  
Press the MENU button when finished  
Burn-in Image Reducer  
When burn-in is minimal, burn-in and residual images may be softened with the BURN-IN  
IMAGE REDUCER function.  
Press the MENU button  
›‚  
To BURN-IN IMAGE REDUCER  
To enter  
¥Š  
Burn-in will be reduced by displaying snow on the screen for approximately 55 seconds, and  
white for approximately 5 seconds in sequence. Leave the television in this state for some time  
(more than a few hours).  
Push the MENU button to bring back to the normal screen.  
Reset  
Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig.  
noise clear and color management) at once to the default settings.  
Press the MENU button  
›‚  
To RESET  
To enter  
¥Š  
The onscreen menu disappears for a moment, and  
then the settings are reset to the default setting for  
all the picture adjustments.  
Press the MENU button when finished  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
BASS You can increase or decrease the level of low-frequency sound in the TVs audio with  
the bass adjustment.  
TREBLE Use treble to adjust the level of high-frequency sound in your TVs audio.  
BALANCE Adjust the level of sound between the TVs left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
›‚ꢀ  
To BASS, TREBLE or BALANCE  
To adjust the setting  
¥Š  
›‚  
To move to the next setting  
Press the MENU button when finished  
Notes:  
You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as  
the default setting when you select reset. See page 48.  
You can adjust BALANCE only when A.H.S. is off. See page 55.  
MTS (Multi-Channel Television Sound)  
MTS technology allows several audio signals to be broadcast at once, giving you a choice  
in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
Press the MENU button  
›‚ꢀ  
To MTS  
¥Š  
Select the mode  
(The ON AIR arrow tells you if a broadcast is in stereo and/or  
contains an SAP).  
Press the MENU button when finished  
Notes:  
Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
MTS unavailable if your televisions input source is in input 1, 2, 3 or 4 mode, as described  
on page 54.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 26 as the interactive plug-in menu. You can  
choose to set the clock automatically, or manually. If you need to set the clock again, follow  
the steps below.  
Press the MENU button  
›‚  
To SET CLOCK  
To operate  
¥Š  
When you set the clock automatically, choose AUTO by pressing the ¥ꢀor  
Š
arrows.  
›‚ꢀ  
To TIME ZONE  
¥Š  
To select your time zone  
›‚  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
¥Š  
Press OK to finish  
Press the MENU button when finished  
When you set the clock manually, choose MANUAL by pressing the  
¥
or  
Š
arrows.  
›‚ꢀ  
¥Š  
›‚ꢀ  
¥Š  
To move to the hour  
To set the hour  
To move to minutes  
To set the minutes  
Press OK to start clock  
Press the MENU button when finished  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when youre not  
home.  
Press the MENU button  
›‚ꢀ  
¥Š  
¥Š  
ꢀꢀꢀ‚  
¥Š  
ꢀꢀꢀ‚  
To ON/OFF TIMER  
To operate (begins with ON TIME)  
To set the hour (AM/PM) you want the TV to turn on  
To move to minutes  
To set the minutes  
To accept ON TIME and move to OFF TIME (the time  
the TV will turn off). Set the OFF TIME the same way as ON TIME  
ꢀꢀꢀ‚  
¥Š  
ꢀꢀꢀ‚  
¥Š  
ꢀꢀꢀ‚  
¥Š  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
To set the volume level  
To move to MODE  
Choose ONCE or EVERYDAY  
ꢀꢀꢀ‚  
¥Š  
ꢀꢀꢀ  
To ON/OFF TIMER  
Choose YES to accept the timer setting, choose NO if you dont wish to accept  
Press the OK button to finish  
Press the MENU button to exit the menu  
Notes:  
The on/off time cannot be set to locked or guarded channels.  
In order for the on/off timer to work, the clock must be set.  
After a power interruption, the timer settings must be reset.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Multi Screen Function  
Your television has two kinds of screen: SPLIT (2 channels) and INDEX (12 channels).  
Note: After you press any multiscreen button, if you press the menu button, only the picture  
adjust screen will appear.  
Split  
Activate the split-screen option by pressing SPLIT on the remote control.  
A channel and input will now appear onscreen. The  
channel (or input) you were watching before pressing  
SPLIT will appear on the left, the input will appear on  
the right. The sound will continue to come from the  
main screen channel (or input). To turn split-screen  
off and return to normal television viewing, press  
SPLIT again or press the BACK button.  
Notes:  
You can enter the SPLIT mode when the screen is in NORMAL or INDEX mode.  
Split-screen functions will not work with locked channels or channels blocked by V-Chip  
ratings limits. A grey screen will display instead.  
With split screen, the picture from the component terminal and HDCP terminal will not be  
displayed.  
The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of  
480p, 720p and 1080i from the component terminal and HDCP terminal.  
After you press the Select button, and select SPLIT SCREEN when you press the  
OK button, select normal screen. If you dont operate, the MAIN CHANNEL SCREEN will  
be automatically selected about 8 seconds later.  
Main channel picture and split-screen will not display the same RF channel and same  
input.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Index  
This allows you to quickly look at up to 12 channels at a time so that you can decide which  
one to watch.  
Notes:  
Only RF input signal will be displayed.  
You can watch the channel added in channel summary. See page 33.  
Freeze  
Pressing the FREEZE button causes the screen to change to the split-screen display with the  
still picture displayed on the right. In order to return to the normal display, press the FREEZE  
button once again.  
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this  
function will cancel out.  
Swap  
You can exchange the channel (or input) displayed in the split screen window for the main  
screen image by pressing the SWAP button.  
Note: It will only work in SPLIT mode.  
Select  
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you  
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT  
will shift the channel.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 7:  
0 (Zero)  
7 (Seven)  
100+ Button  
Use the 100+ button to directly access channels above channel 99. For example, to move to  
channel 124, press 100+, 2 (Two), 4 (Four).  
Input  
Selects the signal input source for the television: Input-1, 2, 3 or 4 for video devices like  
VCRs DVD players, or camcorders.  
INPUT 1, 2, 3, 4  
Note:  
When you return to TV mode, press the RETURN +/TV button or direct 10 key pad.  
Digital-In  
Use this button to directly select the digital-in input.  
Press the DIGITAL-IN button  
Digital-In will display only when the 480p picture signal in Digital-In is displayed.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +/TV  
The return+/TV button has three functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CHbuttons.  
TV - Returns to the TV mode.  
RETURN+/TV and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED !  
The channel currently active has been programmed as your return+ channel.  
Now scan through the channels using the CHANNEL+/buttons.  
RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The  
message RETURN CHANNEL CANCELLED!will appear.  
Return+ works only with the Channel+/buttons. Pressing any number key will cancel  
return+.  
Sound  
By pressing the sound button, you can change the A.H.S. (Advanced Hyper Surround) mode,  
BBE and A.H.B. (Active Hyper Bass) mode.  
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
BBE -  
BBE high definition audio adds natural, clear and extraordinary sound quality to any  
program.  
A.H.B. - You can reinforce the bass sound to maintain rich, full bass at low volumes, and  
enjoy a clear sound with boosted bass.  
Press the SOUND button  
›‚  
To select A.H.S., BBE or A.H.B.  
To choose the setting  
¥Š  
Press the MENU when finished  
Note: BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from  
BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from  
BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
Video Status  
The Video status button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the standard settings.  
Dynamic - Gives a vivid picture with better contrast when viewing  
in a brightly lit room.  
Theater - Gives a rich, film-like look to video when viewing in a  
dimly lit room.  
Game - Used for when you are playing video games connected to  
your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Notes:  
You can also change the mode by pressing the buttons.  
The VIDEO STATUS function is initially set to DYNAMIC. Unless the TV is being watched  
in an extremely bright room, it is recommended to change the VIDEO STATUS setting to  
standard, theater or game. Doing so will reduce the chance of PDP burn-in and extend the  
life of the PDP.  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a  
program originally shot on film (such as motion pictures) or animation. If you notice blurring  
at the edges of these programs, press NATURAL CINEMA and set it to AUTO. Natural Cinema  
helps correct conversion errors that occur when film, which is shot at 24 frames-per-second,  
is broadcast at the television rate of 30 frames-per-second.  
Press the NATURAL CINEMA button  
Note: The natural cinema mode is automatically set to AUTOin  
the following cases:  
Turning on or off  
Changing the channel or input mode  
Using multi-screen functions  
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the  
film to video editors intended it to be.  
Press the THEATERPRO button  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in  
intervals of 15 minutes, for a total time of up to 180 minutes.  
Press the SLEEP TIMER button  
Sleep Timer Message  
20 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT!!  
PUSH SLEEP TIMER BUTTON  
TO EXTEND.  
You then have 20 seconds to press the SLEEP TIMER button to  
delay the shut off for another 15 minutes.  
Display  
The display screen shows the current status of timers, inputs, and XDS ID.  
Press the DISPLAY button  
The screen to the right shows the following information:  
The current channel or AV input (Channel 05)  
The current time (12:20 pm)  
Sleep timer status/minutes remaining (The Sleep Timer  
is off)  
On/off timer status (Set to turn on everyday at 7:00 PM,  
off at 10:00 PM)  
Each Press of the DISPLAY button changes the display mode:  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
If the clock, sleep timer or on/off timer are not set, the display screen will show:  
CLOCK NOT SET, SLEEP TIMER OFF, and ON/OFF TIMER OFFrespectively.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying  
the original picture to fit the dimensions  
of your 16:9 screen. The 4:3 picture  
will fil lthe screen from top to bottom,  
while black bars will appear to fill up the  
remaining space along the pictures sides.  
The 4:3 picture will be centered within the  
boundaries of the 16:9 screen.  
CINEMA - This ratio zooms inon  
the center part of a 4:3 aspect picture,  
blowing it up to fill the 16:9 screen.  
CINEMA ZOOM - This ratio streches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
HD PANORAMA - This ratio streches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
NTSC, 480i, 480p,  
HDCP 480p  
720P, HDCP 720p  
HD, HDCP 1080i  
Notes:  
You can also choose the size by pressing the ‚  
buttons.  
When you change the aspect ratio or signal, reset the picture position to center.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
See page 46 when you set the caption/text mode.  
Menu  
The MENU button allows you to access JVCs onscreen menu system. Press MENU to activate  
the onscreen menu system.  
See individual topics like Sound Adjustfor specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
TV/CATV Slide Switch  
Use either the televisions own tuner or a cable box to select channels. Set this switch to TV  
to operate the televisions built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
See page 28 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
The remote is preset with the code 000 to control JVC-brand VCRs. For any other  
manufacturers brand VCR, please see the code chart and instructions on page 27.  
The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturers brand DVD player, please see the code chart and instructions on page 28.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and  
power off.  
Move the selector switch to VCR to operate.  
The remote is preset with the code 000 to control JVC-brand VCRs. For any other  
manufacturers brand VCR, please see the code chart and instructions on page 27.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on, and power off.  
Move the selector switch to DVD to operate.  
The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturers brand DVD player, please see the code chart and instructions on page 28.  
Light  
Your remote control includes illuminated buttons for key features like Channel +/and  
Volume +/. Press the light button to turn the illumination on for 4 seconds.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact  
the JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
- Check for a blown fuse or circuit breaker or a power outage.  
- Check that the plugs on the power cords from the TV and receiver are  
connected to wall outlets.  
There is no power  
The power lamps do  
not light even though  
the TV is on  
Check that POWER INDICATOR in the MENU is not set to OFF.  
- The antenna could be disconnected.  
- The input mode could be set improperly. See page 54.  
- The tuner (AUTO TUNER SETUP) could be set improperly. See page 33.  
- The TV station may be having difficulties. Check to see if other stations  
are working.  
There is no picture or  
sound  
- Check to see that the batteries are still working and properly installed.  
- Make sure the remote has a clear sight path to the TV.  
- Check that the TV/CATV switch is in the proper position.  
- You may be too far from the TV. You must be within 23 feet (7 meters).  
- Use the remote control while pointing it at the screen.  
Remote control is not  
operating properly or  
at all  
- Make sure the channels have been programmed. See Channel  
Summaryon page 33.  
- Check to see if the channel is locked. See Channel Summary - Lock”  
page 34.  
You cannot select a  
certain channel  
- Make sure the set did not become unplugged.  
- Perhaps the ON/OFF TIMER is set. See page 51.  
- Check to see if the Sleep Timer was set. See page 57.  
The power turns off  
by itself  
This television is operated by a microprocessor. It is possible that external  
noise or interference is causing the problem. If the television does not  
function correctly, remove the power plugs of the TV and Receiver from  
the wall outlets and wait a while before inserting them into the wall outlets  
again and operating the television.  
It does not operate  
correctly  
The clock is wrong  
The power was interrupted and the clock was not reset. See page 50.  
- Tint and Color may be improperly adjusted. See page 47.  
- The VIDEO STATUS mode may be turned to the wrong setting. See  
page 56.  
The color quality is  
poor  
There could be interference from another electrical appliance, such as a  
computer, another TV or VCR. Move any such appliances further away  
from the TV.  
There are line across  
the picture  
There could be interference from a high-wattage appliance, like a hair  
dryer or vacuum, operating nearby. Move the antenna away from the  
appliance or change to a coaxial cable connection which is less prone to  
interference.  
The picture is spotted  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
There are double  
picures (ghosts)  
A building or passing airplane can reflec the original signal and produce a  
second, slightly delayed one. Adjust your antenna position.  
Your antenna may be damaged, disconnected or turned.  
Check the antenna connection, page 17 in Quick setup.  
If the antenna is damaged, replace it.  
Picture is snowy  
(image noise)  
The Closed Caption Text mode is on. Turn it off in the CLOSED CAPTION  
Menu, see page 59.  
Screen is 80% black  
Stereo or bilingual  
programs cannot be  
heard  
Make sure the MTS settings are correct. See MTSon page 49.  
You hear occasional  
crackling sounds  
It is normal for the TV to make cracking sounds when first turned on or  
off. Unless the sound or picture becomes abnormal, this is fine.  
The following are not malfunctions.  
The television may make a creaking sound if the temperature of the room or the  
temperature of the inside of the television changes. If there is no problem with the screen or  
sound, then there is no need to worry.  
Although the picture may be temporarily disturbed and noise may be seen on the screen if  
the power is turned on immediately after it has been turned off, this is not a malfunction.  
If the television is used at a location above 2,000 m, a buzzing noise and image distortion  
may occur. This phenomenon is peculiar to PDP (Plasma Display Panel), and could occur  
with any television using PDP. It is not a malfunction.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth,  
slightly moistened with water. You can add a few drops of mild liquid detergent to the water to  
help remove spots of oily dirt.  
DO NOT allow liquid to enter the TV through the ventilation slots.  
DO NOT use strong or abrasive cleaners on the TV.  
DO NOT spray liquids or cleaners directly on the TVs surface.  
DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
When it gets dirty, wipe it gently with a soft cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the  
screen. These will remove the coating layer and cause discolorations.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth  
below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE  
MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown  
below. (The Warranty Period)  
LABOR 1 YEAR  
PARTS 1 YEAR  
This limited warranty is valid only in the fifty (50) United States, The District of Columbia  
and Commonwealth of Puerto Rico.  
WHAT WE WILL DO:  
If this product is found to be defective within the warranty period, JVC will repair or replace  
defective parts at no charge to the original owner.  
Such repair and replacement services shall be rendered during regular business hours by JVC  
authorized service centers. Parts used for replacement are warranted only for the remainder of  
this Warranty Period. Televisions with a screen size of 25 inches and larger are covered on  
an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Either contact the selling dealer (retailer) or call 1-800-252-5722 to arrange In-home  
service. In-home service will require clear access to the Television by the service  
technician.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering,  
negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by  
anyone other than a service facility authorized by JVC to render such service, or if affixed  
to any attachment not provided with the products, or if the model or serial number has  
been altered, tampered with, defaced or removed. If the upper unit is removed from the  
lower unit by anyone other than a dealer or service facility authorized by JVC.  
2. Initial installation, installation and removal from built-inentertainment centers and other  
mounting systems.  
3. Operational adjustments covered in the Owners Manual, normal maintenance, including  
head cleaning.  
4. Damage that occurs in shipment, due to an act of God, and cosmetic damage.  
5. Signal reception problems and failures due to line power surge.  
6. Products used for commercial purposes (including but not limited to rental).  
7. Accessories.  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from date of  
purchase).  
There are no express warranties except as listed above.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF  
MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE,  
OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL  
(INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS)  
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE  
LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations  
on how long the warranty lasts, so these exclusions or limitations may not apply to you. This  
warranty gives you specific legal rights and you may also have other rights which vary state  
to state.  
JVC COMPANY OF AMERICA  
1700 Valley Road  
DIVISION OF JVC AMERICAS CORP.  
Wayne, New Jersey 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY DOES  
NOT APPLY. FOR DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER  
TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH  
REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or  
side of the cabinet.  
Retain this information for future reference.  
Model No.:  
Serial No.:  
Purchase Date:  
Name Of Dealer:  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Authorized Service Centers  
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1 (800) 537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase, please read the instruction  
booklet before operating the unit. In the event that repairs are necessary, call our Customer  
Relations Department at 1-800-537-5722 or visit our website at www.JVC.com  
Remember to retain your Bill of Sale for Warranty Service.  
Dont service the television yourself  
Caution  
To prevent electrical shock, do not open the cabinet. There are no user serviceable parts  
inside. Please refer to qualified service personnel for repairs.  
Accessories  
To purchase accessories for your JVC product, please call toll free:1 (800) 882-2345 or on the  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
MODEL  
PD-42WV74  
Type  
Plasma Display  
NTSC, BTSC System (Multi-Channel Sound)  
1080i DTV digital broadcast ready  
Reception Format  
VHF 2 to 13, UHT 14 to 69 Sub, Mid, Super, Hyper et Ultra bands  
(180 channel frequency synthesizer system)  
Reception Range  
Power Source  
AC 120V, 60Hz  
TV : 340W  
Power Consumption  
Receiver : 27W  
Screen Size  
42 inch / 107.5 cm measured diagonally, 16:9 ratio  
18W + 18W  
Audio Output  
(3 15/16 x 1 3/16 inch / 10 cm x 3 cm) oval x 2  
Woofer ( 5 1/8 x 2 9/16 / 13 cm x 6.5 cm) oval x 2  
Speakers  
Antenna Terminal  
External Input Jacks  
75 ohms (VHF/UHF) (F-type connector)  
Video : 1Vp-p, 75 ohms  
Audio : 500mVrms (-4dBs) high impedance  
Y : 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input Jacks  
Y : 1Vp-p positive, 75 ohms (negative sync provided)  
Pb/Pr: 0.7 Vp-p, 75 ohms  
Component Input Jacks  
Audio Output Jacks  
(VARI/FIX)  
VARI: More than 0 to 1000mVrms (+2.2 dBs)  
FIX: 500mVrms (-4dBs) Low impedance (400 Hz when modulated 100%)  
More than 0 to 1000mVrms (+2.2 dBs)  
Low impedance (100 Hz when modulated 100%)  
Subwoofer Output Jack  
AV Compu Link III Jack  
Digital-In  
3.5 mm mini jack x 1  
DVI-D single Link 19 pin  
Note: The Digital-In terminal is not compatible with picture signals of a personal computer  
TV:  
45 11/16 x 31 7/16 x 12 3/16 inch / 1160 x 798 x 308mm (with the stand)  
Dimensions  
W X H X D  
45 11/16 x 28 13/16 x 3 7/8 inch  
/
1160 x 731 x 98 mm (main TV body)  
Receiver : 17 3/16 x 3 15/16 x 15 1/16 inch  
/
435 x 99 x 382 mm  
TV:  
106 lbs  
84 lbs  
/
/
48 kg (with the stand)  
38 kg (main TV body)  
Weight  
Receiver : 11.3 lbs  
/
5.1 kg  
Accessories  
Refer to "Unpacking your TV" on page 8.  
Specifications subject to change without notice.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jacuzzi Hot Tub D578 User Manual
JVC Car Stereo System GET0558 001B User Manual
JVC Clock Radio UX S10 User Manual
JVC Indoor Furnishings RK C28E1S User Manual
JVC Speaker System CA UXH30 User Manual
JVC VCR 0203 AH CR LG User Manual
JVC VCR HR J240E User Manual
JVC VCR HR J271MS User Manual
Kenmore Clothes Dryer 1106705 User Manual
KitchenAid Toaster 4KTT340OB0 User Manual