ENGLISH
WIDE LCD PANEL TV
INSTRUCTIONS
Contents
PREPARATION
Safety precautions............................... 2
Remote control buttons and functions... 3
Set up and connections....................... 4
Initial settings....................................... 6
Registering / Editing channels............. 7
Channel Summary............................... 7
Operating the menus........................... 8
FUNCTIONS
Picture setting...................................... 9
Sound setting .....................................11
Useful functions................................. 12
Viewing Teletext................................. 14
Viewing Closed Caption .................... 14
Watching Video or DVDs................... 15
REFERENCE
Troubleshooting................................. 16
Technical information......................... 17
CH/CC List......................................... 18
Specification...................................... 19
LT - 32EX18
LT - 42EX18
HIGH-DEFINITION MULTIMEDIA INTERFACE
GGT0220-001A-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
Turn the TV on from standby
Colour button
• Insert the batteries
“AAA/R03” Batteries
Use two “AAA/R03” dry
cell batteries. Insert the
batteries from the · end,
making sure the · and
ª polarities are correct.
Turn on “Clear SD”
Change the aspect ratio (P. 10)
V-Scroll
1. Select
Zoom
16:9 Zoom
Auto
Panoramic
Clear SD
ZOOM
WARNING:
Batteries shall not be exposed to excessive
heat such as direct sunshine, fire or the like.
Turn the volume off/on
Change channel/page
Regular
Panoramic
14:9 Zoom
16:9 Zoom
Full
OK
2
5
8
0
3
6
9
1
4
Move the picture with
5 or ∞ while this bar
is displayed.
2. Set
RETURN PLUS function
Return to the frequently viewed channel.
7
RETURN
Turn on “Cinema Surround”
Choose the channel you want to programme
ECO
+
Turn on “Eco Mode”
To Teletext (P. 14)
RETURN +
TV/VIDEO
MENU
Return Plus
Programmed!
Display on-screen menu
Press and hold
Operate the menu
To previous screen
To cancel
OK
RETURN +
Adjust the volume, Turn off muting
View the Teletext (P. 14)
Return Plus
Canceled!
DISPLAY
BACK
Press and hold
CHANNEL
VOLUME
Favorite channel setting. (P. 13)
1. Register the favorite channel
MODE
RETURN function
If you have not set or have canceled the RETURN PLUS
channel, this will return to the previously viewed channel.
Press number
button (1-4 only)
Set 1-4 ?
Select TV or Video input
Channel information
Press and hold
Programmed! will be displayed.
Channel selection
2. Recall the favorite channel
Select the desired channel number.
For Hyper Scan
RM-C2020
LCD
Press number
button (1-4 only)
Favorite 1-4 ?
CHANNEL
PR changes without changing the
Press
picture. Once you stop pressing
CHANNEL+ or CHANNEL - button,
• If the favorite channel has not been registed
then “No Memory” will be displayed.
picture will change to the desired PR.
Press and hold
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up and connections
Connect an aerial and VCR / DVD Player
Switch between
TV / VIDEO devices
Display on-screen menu / set
TV/VIDEO
MENU/OK
AERIAL
VIDEO-2
R
L
V
Change channel / Page /
Hyper Scan Function (P. 3)
CHANNEL
Power lamp
ON : Lit (Blue)
OFF: Unlit
Volume / Adjust
Power On / Off
VOLUME
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 13)
Remote control sensor
To Headphone (P. 5)
OR
Care when setting
■
Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
■
When attaching the TV to the wall, use the optional JVC wall
mounting unit
• Consult a qualified technician.
• JVC assumes no responsibility for damage due to improper mounting.
• 200mm x 200mm mount which conforms to VESA standards.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
■
Installation requirements
• To avoid overheating, ensure the unit has ample room.
1
2
200mm
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
150mm 50mm
150mm
50mm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up and connections (continued)
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setup.
(Connecting cables are not supplied with this TV.)
VIDEO-1 Watching videos
Output
Input
· Composite
signal /
Component
signal (P. 19)
· Sound L / R
HDMI-1
HDMI-2
Headphone
DIGITAL VIDEO/AUDIO
· Use Component signal
“Video - 1 Setting” (P. 15)
To “HDMI-1”
To “HDMI-2”
VIDEO-2 Watching videos
Output
Input
· Composite
signal
· Sound L / R
DVD player
(HDMI compatible)
DVD player
(HDMI compatible)
Component input
Composite input
L
L
R
V
R
V
VIDEO-1
VIDEO-1
VCR / DVD recorder
Pr
Pb
Y
Pr
Pb
Y
HDMI-1 Connecting
HDMI-2 HDMI devices
Amplifier
Output
Input
(L)
(R)
Game
Video
· HDMI signal
(P. 19)
R
L
V
OUTPUT
VIDEO-1
· “HDMI Setting” (P. 15)
· HDMI-2 input does not support
analogue audio.
L
L
R
V
Y
VCR
DVD Player
R
Pr
Pb
· Connect a “DVI” device to
“HDMI-1” (P. 17)
To VIDEO-2
Game consoles Video camera
HDMI-1
( DVI ANALOG AUDIO )
VIDEO-2
PC
R
L
V
OUT
- Video and sound signal of a TV
channel you are viewing outputs
from this terminal.
PC AUDIO
PC
PC IN
(D-SUB)
Output
· Composite
Signal
· Sound L/R
• Check for PC compatibility.
“PC signals that can be displayed” (P. 17)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings
1. Turn on the TV
2. Select a language
3. Select Country Area
> Language
1. Select
2. Set
>
1. Select
2. Set
Country Area
English
OK
�������
Castellano
Português
Area-1
Area-2
OK
OK
JVC logo appears
• The power on the unit can also be used.
• To select the new Country Area after Initial Setting has completed.
MENU
(While the cursor is pointing to Picture
menu and hold for 3 seconds.)
1
If you select Country Area to “Area-1”
4. Select the teletext language group.
If you select Country Area to “Area-2”
>
Teletext Language
Select
Group - 1
Group - 2
Group - 3
Group - 4
Group - 5
Group - 6
4. Select Air or Cable.
OK
1. Select
2. Set
>
Auto Program
Air
Cable
OK
• See “Language group for teletext” (P. 17)
5. Automatically register channels (Auto Program)
5. Searching for the channels (Auto Program)
>
Auto Program
OK
>
Auto Program
CH 09
12%
CH 09
12%
6. Check what was registered.
6. Check what was registered.
> Edit
> Channel Summary
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
OK
OK
CH/CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
• If you want to edit channel,
see “Registering / Editing channels”
(P. 7)
• If you want to set undesired
channels to be skiped,
see “Channel Summary” (P. 7)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering / Editing channels
Channel Summary
This function is available when select Country Area to “Area-1” only.
You can edit the channel list or register new channel manually.
This function is available when select Country Area to “Area-2” only.
You can edit the channel list.
> Edit
> Channel Summary
Select a channel
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
Select a channel
CH/CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
OK
OK
Move
Skip
Move a channel position
Skip the channel.
1. Start
> Edit
> Channel Summary
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
CH/CC
ID
Skip
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
_ _ _ _
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
(Red)
OK
OK
2. Move
Finish
Edit a channel name
Cancel the skip channel.
ID
Cancel
ID Edit
1. Select the character
2. Move to the next column
> Channel Summary
> Edit
CH/CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
Yes
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
(Red)
_ _ _ _
(Green)
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
OK
ABCD
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
3. Set
Insert / Delete a channel
Edit a channel name.
Insert/Delete
1. Select a 2. Enter a
> Edit
(Yellow)
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
number 0-9
button then,
receives the
broadcast
signal.
CH/CC
(Green)
_ _ _ _
BBC
ABCD
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
CH
**
OK
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
1. Select the character
2. Move to the next column
> Channel Summary
CH/CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
Yes
_ _ _ _
■■■■
• Delete a channel by press (Yellow) button.
_ _ _ _
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
OK
• “CH/CC List” (P. 18)
Register a new channel
Manual
3. Set
1. Beginning channel search
> Manual
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07 (B/G)
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
_ _ _ _
BBC
(Red)
(Green)
(Blue)
• Channels are to be skipped cannot be selected by the CHANNEL -/+
button.
• The skip can be set to all channels of Air (CH02 - CH69) and Cable
(CC01 - CC125)
ABCD
or
OK
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
From high From low
frequencies frequencies
2. Set
(Blue)
• Channel fine tunning ➡ (Yellow)
/
• If the picture or sound is unnatural ➡
for select a system.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Operating the menus
You can select the Country Area between Area-1 and Area-2. See in item 3 of “Initial setting” (P. 6)
See the menus location in the below table.
Set Country Area to “Area-1”
Set Country Area to “Area-2”
2nd Menu
Picture Mode
Back Light
Picture
Bright
Detail
Color
Tint
White Balance
Features
-
MTS
Bass
Treble
Balance
Cinema Surround
On Timer
Sleep Timer
Channel Guard
Blue Back
Child Lock
Auto Shutoff
Favorite Setting
Power Lamp
Eco Mode
Auto Program
-
Channel Summary
Language
Video-1 Setting
AI Volume
Appearance
-
Top Menu
Picture
2nd Menu
Picture Mode
Back Light
Picture
Bright
Detail
Color
Tint
White Balance
Features
■
Stereo / I II
-
Bass
Treble
Balance
Cinema Surround
On Timer
Sleep Timer
Channel Guard
Blue Back
Child Lock
Auto Shutoff
Favorite Setting
Power Lamp
Eco Mode
Auto Program
Edit / Manual
-
Language
Video-1 Setting
AI Volume
Appearance
Teletext Language
HDMI Setting
PC Setting
-
Page
9
9
9
9
9
9
9
9
Top Menu
Picture
Page
9
9
9
9
9
9
9
9
10
11
-
10
-
Sound
Sound
11
11
11
11
11
12
12
12
13
13
13
13
13
13
6
11
11
11
11
12
12
12
13
13
13
13
13
13
6
7
-
6
15
11
13
7
15
15
-
Features
Features
Set Up
Set Up
-
7
6
15
11
13
-
15
15
14
HDMI Setting
PC Setting
Closed Caption
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture setting
1. Display “Picture” menu
2. Select item and setting or adjust
• To enter an items menu
1. Select
2. Adjust
1. Select
Picture
1. Select
2. Enter
>
Picture
>
Picture Mode
Back Light
Picture
Bright
MENU
OK
OK
OK
Bright
Detail
Color
Tint
3. Finish
2. Enter
White Balance
Features
Cool
>
You can select a preset picture setting according to your favor.
Bright : Hightens contrast and sharpness.
Picture Mode
Standard : Standardize picture adjustment.
Soft : Softens contrast and sharpness.
You can change the backlight brightness.
Darker Brighter
Back Light
Picture
Bright
Detail
You can change the contrast of the picture.
Lower Higher
You can change the brightness of the picture.
Darker Brighter
You can change the sharpness of the picture.
Softer Sharper
You can change the color of the picture.
Lighter Deeper
Color
You can change tint only in NTSC.
Reddish Greenish
Tint
You can change the white balance of the picture to better match the type of video being view.
Cool
Warm
Mid
: Bluish white color.
: Reddish white color.
: Normal white color.
White Balance
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture setting (continued)
Finer Picture adjustment
>
Features
>
>
Clear SD
off
off
off
off
off
off
Digital VNR
DigiPure
Pull Down
Color Management
Picture Management
Color System
Zoom
>
>
Clear SD
:
For clearly picture (Off / Mode-1 / Mode-2)
When Clear SD set to Mode-1 or Mode-2, then Digital VNR and DigiPure and Picture
Management cannot operate.
Digital VNR
DigiPure
:
:
:
:
:
:
Reduce the amount of noise in original picture. (Off / On)
For natural - looking outlines (Off / On)
For smooth cinema film (Auto / Off / On)
For natural - looking pictures (Off / On)
Fix bright / dark pictures. (Off / On)
Features
Pull Down
Color Management
Picture Management
Color System
When there is no color, change the color system.
(Area-1 : PAL / SECAM / NTSC 3.58 / NTSC 4.43 / Auto, Area-2 : PAL-M / PAL-N / NTSC / Auto)
Zoom
:
Change the aspect ratio.
• When 720p or 1080i or 1080p signal
is received, “Full” and “Slim” can be
selected.
• In PC mode, “Regular” and “Full” can
be selected.
>>
Zoom
Panoramic
16 : 9
Regular/Slim
4 : 3
14:9 Zoom
14 : 9
>
>
Auto
Panoramic
Regular
Panoramic
14:9 Zoom
16:9 Zoom
Full
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound setting
2. Select item and setting or adjust.
1. Display “Sound” menu.
• Set Country Area to “Area-1” • Set Country Area to “Area-2”
1. Select
2. Adjust
Sound
Sound
MENU
1. Select
2. Enter
>
■
>
Stereo / I II
I II Mono
MTS
Stereo
On Air
SAP Mono
Sound
Bass
Bass
Treble
Treble
Balance
Cinema Surround
OK
OK
Balance
Cinema Surround
Off
Off
3. Finish
■
Stereo / I II
Select the stereo, mono or bilingual language (O : Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)
Select the stereo and SAP broadcasted programs. (Stereo : Stereo sound / SAP : Second Audio Programs / Mono:
mono sound)
MTS
Bass
Treble
Low tones (Weaker
High tones (Weaker
Stronger)
Stronger)
Balance
Speaker balance (Left Stronger
Right Stronger)
Off
Ambient sound
Cinema Surround
High
Low
Mono
• Prevent the sudden change of sound.
1. Display “Set Up” menu.
2. Select “Al Volume”
AI Volume
Set Up
1. Select
“Set Up”
1. Select “AI Volume”
2. Adjust to On/Off
>
Auto Program
Channel Summary
Language
Video-1 Setting
Al Volume
Appearance
HDMI Setting
PC Setting
MENU
Prevent sudden
increase or decrease
of sound when
>
>
OK
OK
Video
On
Size-1
>
>
Set Up
>
>
>
changing channels.
2. Enter
Closed Caption
This on screen is shown for Area-2 of Country Area.
For Area-1, see in “Operating the menus” (P. 8)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions
1. Display “Features” menu.
MENU
• To enter an items menu
2. Select item and setting or adjust.
Features
1. Select
1. Select
2. Adjust
>
On Timer
Sleep Timer
1. Select
2. Enter
>
Channel Guard
Blue Back
Child Lock
Auto Shutoff
Favorite Setting
Power Lamp
Eco Mode
OK
Off
Off
Off
OK
OK
Features
>
2. Enter
3. Finish
Off
Off
1. Select PR channel that you want to watch.
1. Select PR
channel
2. Set the On Timer to your desired period at time.
On Timer
1. Select
“On Timer”
>
On Timer
2
5
8
0
3
6
9
1
4
7
>
TV to turn on
automatically from
standby mode at
a set channel
and time.
>
PR
02
:
On Timer
00
00
OK
OK
OK
2. Set
3. Set
2. Select item
(Blue)
Note : Press
for reset time setting.
>
Sleep Timer
> 0
Sleep Timer
1. Select a time in minutes Note : When the remaining elapse is one minute,
120
“Good Night!” appears on the screen.
TV to turn off
Off
>
OK
automatically to
standby mode after
a set time.
2. Set
1. Select “Channel Guard”
2. Select a channel and lock it ( : locked )
Channel Guard
> Channel Guard
Lock / Release
(Blue)
1. Select
a number
1. Select a
channel
>
Set ID No.
CH/CC
ID
Skip
Stop children from
watching specific
channels.
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ABCD
_ _ _ _
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
0
0
0
0
0
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
OK
OK
2. To the next
column
3. Enter
• This on screen is show for Area-2 of Country Area. For Area-1, see in “Operating the menus” (P. 8)
• View a locked channel by use the numerical buttons to enter the channel number. When appears, press “DISPLAY”
button and enter your “ID No.”
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions (continued)
Blue Back
Child Lock
Auto Shutoff
Display a blue screen and mute the sound when the signal is weak or absent. (On / Off)
Disables the side control buttons of the TV. (On / Off)
Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off)
Delete the favorite channel that you registered.
(Blue)
1. Select
>
>
Favorite Setting
Favorite Setting
1
1
PR 01
PR 03
PR 02
PR 01
PR 02
Favorite Setting
2
3
4
2
3
4
OK
To delete
Power Lamp
Eco Mode
Power lamp lights while the TV is on. (On / Off) (P. 4)
Adjust contrast of light and dark according to the brightness of your room. (Off / Eco-1 / Eco-2)
• Change the on screen menu size.
1. Display “Set Up” menu.
2. Select “Appearance”
Appearance
Set Up
Auto Program
Channel Summary
Language
Video-1 Setting
AI Volume
Appearance
HDMI Setting
PC Setting
>
>
>
1. Select
2. Enter
1. Select
MENU
Change the on-screen
menu size.
OK
OK
Video
On
Size-1
<
>
>
>
>
Set Up
2. Adjust to
Size-1 / Size-2
Closed Caption
This on screen is shown for Area-2 of Country Area.
For Area-1, see in “Operating the menus” (P. 8)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Teletext
This function is available when select Country Area to “Area-1” only.
You can watch the Teletext broadcast channel with Text Functions.
Viewing Closed Caption
This function is available when select Country Area to “Area-2” only.
Select the input Source.
TV mode <--> TEXT mode
1.
1. Select “Set Up”
2. Select a teletext page by press number button (0-9)
MENU
1. Select
CHANNEL
OK
• Move up or down a page by
Set Up
2. Enter
Bookmark your favorite page.
MODE
(Red) (Green) (Yellow) (Blue)
to bookmark
2. Select “Closed Caption”
List Mode
Press number button
for enter the number of page
Set Up
Save
Auto Program
Channel Summary
Language
>
>
>
1. Select
2. Enter
Video-1 Setting
AI Volume
Video
On
Size-1
OK
• Recall your favorite page by press the color button.
Appearance
HDMI Setting
PC Setting
>
>
>
Hold the current page.
• Cancel by press this button again.
Closed Caption
Hold
Reveal
Size
3. Select the desired caption or text channel.
1. Select item
Display hidden information.
• Example : answer to a quiz, etc.
> Closed Caption
2. Setting
Closed Caption
Caption
Text
Off
CC1
T1
OK
<
>
Double the size of the displayed text.
3. set
Returns to page “100” or
a previously designated page.
Closed Caption : Select to view close caption or text information.
(Off / CC / Text)
Index
Cancel
Caption
: Select the desired caption
(CC1 / CC2 / CC3 / CC4)
: Select the desired text channel.
(T1 / T2 / T3 / T4)
Leave the current page open,
while you switch to watch TV.
• Useful when running a page search.
Text
Display the number of Sub-page.
• Cancel by press this button again.
Sub-page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching Video or DVDs
Select the input Source.
1. Select
2. Set
AV Select
TV/VIDEO
0
1
2
3
4
5
01
Note: TV/VIDEO button select the video source by move
down or use button 0-5 for selection.
Video - 1
Video - 2
HDMI 1
HDMI 2
PC
OK
• Operate the connected device and play video.
1. Select “Set Up”
MENU
1. Select
2. Enter
OK
Set Up
2. Select item
Set Up
1. Select item
2. Setting or Adjust
Auto Program
Channel Summary
Language
>
>
>
Video-1 Setting
AI Volume
Video
On
OK
Appearance
HDMI Setting
PC Setting
Size-1
>
>
>
3. set
Closed Caption
This on screen is show for Area-2 of Country Area. For Area-1, see in “Operating the menus” (P. 8)
Video - 1 Setting
HDMI Setting
> HDMI Setting
Switch between video and component signal (Video / Component)
Setting for HDMI input
Size : Normally set to “Auto.” If wrong screen size appears in 480p (525p), change to “1” or “2”
Audio: Normally set to “Auto.” If no sound, change to “Analogue” or “Digital.”
HDMI-1
Size
<
1
>
Audio
HDMI-2
Size
Analogue
1
• “Audio” is not available for HDMI - 2
Setting for PC input
PC Setting
1. Select
PC Position
1. Adjust
2. Set
>
PC Setting
PC Position : Adjust screen position.
Phase :Sets the focus of screen.
Pixel :Adjusts the horizontal feature of screen.
>
PC Position
Phase
Pixel
OK
OK
2. Enter
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Severe noise or snow
Page
P. 4
P. 4
--
Poor picture quality
Page
P. 9
Unnatural color >>Adjust “Color” and “Back Light”
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check “Color System”. If “Auto” is selected
select the specific color system manually.
Noise >> Set to the following functions.
Picture Mode : Standard
DigiPure : On
P. 10
Check the aerial or its cable damaged or not.
Patterns, stripes or noise
P. 9
Interference caused by devices such as an amplifier,
personal computer, or a hair drier, Move it away from TV.
Ghosting ( Doubling of images )
--
--
P. 10
Dull picture >> Set to the following functions.
Picture Mode : Bright
P. 9
Interference occurs caused by signal reflection from mountains
DigiPure
Poor sound
Adjust the “Bass” and “Treble”.
: On
P. 10
or building. Try to adjust the aerial’s direction or use another
antenna.
P. 11
P. 11
P. 7
Cannot turn it on
■
If receiving a poor signal in “Stereo/ ” switch to “Mono”.
Adjust the channel reception using “Manual”.
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
--
--
For HDMI signal, wrong screen size in 480p (525p).
Switch “Size” in “HDMI setting” to “1” or “2”.
The batteries may be exhausted. Replace with new batteries.
P. 15
--
Ensure that you are operation the remote control at less than
7 meters from the front of your TV.
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format
for an “HDMI” device.
Remote control stops working
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch “Child Lock” to “Off”.
--
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
--
P. 13
P. 10
P. 15
Aspect ratio changed unintentionally
Press “ ZOOM ” button to return to your settings.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices,
or “Analogue” or “Auto” for DVI devices.
PC screen alignment is off
Some functions do not work.
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
P. 15
P. 13
It is not a malfunction. Some functions (dark background) in the menu
do not work depending on the situation.
--
--
Black or white dots appear on the screen.
Switch “Blue Back” to “Off”.
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
--
--
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the
output setting of the external device to 625i (interlace-scanning)
No picture, No sound
Some input do not output from OUT terminal.
--
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical information
Language group for teletext
PC Signals that can be displayed
•
If the signal doesn’t appear, check that the vertical frequency on the
PC is set to “60Hz”.
Group
Group-1
Languages
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
Resolution
640 x 480(VGA) / 1024 x 768(XGA)
60.0
Group-2
Group-3
Group-4
Group-5
Group-6
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish, Finnish
Vertical frequency (Hz)
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English, German
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English, German
• If the characters are unreadable. ➡ Select different teletext language
group. (P. 6)
Sound and Color system in your country or region
Area
Country or Region
System System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore,
Thailand, India, etc.
B/G
No use "Clear SD"
Use "Clear SD"
PAL
D/K
China, Vietnam, etc.
Asia, Middle East
Hong Kong, etc.
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
B/G
M
SECAM
NTSC
SECAM
D/K
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
B/G
PAL
Connect “DVI” devices
I
B/G
I
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
Connect a “DVI” device to “HDMI-1” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
IN HDMI-1.
B/G
Egypt, Morocco, etc.
SECAM
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 15)
• HDMI-2 input does not support analogue sound (IN HDMI-1).
• HDMI-2 input does not support DVI devices.
Argentina, Paraguay, Uruguay
Brazil
PAL-N
South America
PAL-M
NTSC
Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador, etc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CH / CC List
This information is used for Area-1 setting only.
To use the Insert function (P. 7), find the “CH/CC” number corresponding to the TV’s channel number from this table.
US:
CCIR:
OIRT:
The US channel numbers are the channel numbers used in the United States, Philippines, etc.
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
K
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
Channel
CH
L
US
CCIR
OIRT
AUSTRALIA
AU-0
M
CH 02
US-02
US-03
US-04
US-05
US-06
US-07
US-08
US-09
US-10
US-11
US-12
US-13
E2
R1
N
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
E3
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
O
E4
R2
R6
R7
R8
R9
P
E5
Q
E6
R
E7
S
E8
T
E9
U
E10
E11
E12
R10
R11
R12
AU-10
AU-11
V
W
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
Channel
CC
US
CCIR
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
S-1
S-2
S-3
S-4
S-5
S-6
AU-5A
S-7
S-8
S-9
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
A
B
C
D
E
F
G
H
I
X
Y
R3
R4
R5
Z
AU-3
AU-4
Z+1
Z+2
A-5
A-4
A-3
A-2
A-1
J
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Main unit
Terminals / Connectors
Model
LT-32EX18
LT-42EX18
Terminal name
VIDEO-1
Terminal type
Signal type (IN)
Signal type (OUT)
Broadcasting systems
For Area-1 setting : B / G / I / D / K / M
For Area-2 setting : M / N
Composite video, Analogue
component 576i (625i) / 480i
(525i),
Progressive : 576p (625p) /
480p (525p),
Color systems
For Area-1 setting : PAL / SECAM / NTSC 3.58 / NTSC 4.43 MHz
For Area-2 setting : NTSC / PAL-M / PAL-N
RCA connectors x 6
VHF low channel ( VL) =46.25 to 140.25 MHz
Area-1 VHF high channel ( VH) = 147.25 to 423.25 MHz
UHF channel ( U ) = 431.25 to 863.25 MHz
HD : 1080i (1125i), 720p
(750p) / 1080p (1125p)
Audio L / R
VHF low channel ( VL) =55.25 to 127.25 MHz
Area-2 VHF high channel ( VH) = 133.25 to 361.25 MHz
UHF channel ( U ) = 367.25 to 801.25 MHz
VIDEO-2
RCA connectors x 3 Composite video, Audio L / R
Input
terminals
Channels and frequencies
Sound-multiplex systems
HDMI
HDMI-1
HDMI-2
HDMI connector x 1
576i (625i) / 480i (525i)
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
/ 576p (625p) / 480p (525p),
720p (750p) / 1080p (1125p) /
HDMI connector x 1
1080i (1125i)
RCA connectors x 2 Audio L / R
D-SUB (15 pins) x 1 Analogue PC signal
PC-IN (3.5 pinjack) x 1 Audio
NICAM (I / B / G / D / K), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
IN HDMI-1
PC INPUT
PC AUDIO
Teletext systems
FLOF (Fastext), WST (Standard system)
AC 110 V - 240 V, 50/60Hz
Power requirements
Audio output
(Rated power output)
Composite video,
Audio L / R
6 W + 6 W
10 W + 10 W
MONITOR OUT RCA connectors x 3
Output
terminals
Speakers
(16 cm x 4 cm) x 2
(16 cm x 4 cm) x 2
Stereo mini-jack x 1
Headphone
Headphone
output
(3.5 mm in diameter)
Power consumption
[standby]
129 W
[1.3 W]
203 W
[1.2 W]
• We may change the design and specifications without notice.
Screen size
(visible area size measured
diagonally)
80 cm
105 cm
Dimensions
(W x H x D: mm)
[without stand]
791 x 571.7 x 230.5
[791 x 520.5 x 103.9]
1014 x 698 x 296
[1014 x 646.5 x 108.7]
Weights
[without stand]
12.6 kg
[11.9 kg]
22 kg
[20 kg]
Accessories
Remote control unit : RM-C2020 x 1
AAA/R03 dry cell battery x 2
Matching box x 1
Screw x 4
19
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Victor Company of Japan, Limited
0208WKT-NF-MT
Download from Www.Somanuals.com. All Manuals Search And Download.
|