JVC Flat Panel Television 1005TNH II IM User Manual

LCD Flat Television Users Guide

For Model:

LT-40FH96

Illustration of LT-40FH96 and RM-C14G

Important Note:

In the spaces below, enter the model and serial number of your television (located at the

rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this

guide. Keep this user’s guide in a convenient place for future reference. Keep the carton

and original packaging for future use.

Model Number:

LCT1976-001A-A

1005TNH-II-IM

Serial Number:

Download from Www.Somanuals.com. All Manuals Search And Download.

This product incorporates copyright protection technology that is protected by U.S. patents

and other intellectual property rights. Use of this copyright protection technology must

be authorized by Macrovision, and is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

Some pay-per-view programs may be licensed from producers as "view-only" programs.

These are copyrighted programs and may not be copied or reproduced for any purpose

without the express written permission of the copyright owner.

For best viewing, if your VCR is "ON", turn the TV/VCR switch to the "TV" position.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Download from Www.Somanuals.com. All Manuals Search And Download.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus.

16) Avoid improper installation and never position the unit where good ventilation is impossible. When

installing this TV, distance recommendations must be maintained between the set and the wall,

as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance

guidelines shown for safe operation.

200 mm

50 mm

150 mm

17) Cautions for installation

— Do not tilt the TV towards the left or right, or towards the back.

— Install the TV in a corner on the floor so as to keep cords out of the way.

— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is

available around the TV to allow satisfactory cooling.

FCC Notice:

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

WALL MOUNTING

Your panel display can be wall mounted. If you choose to mount it on a wall, an optional

mounting plate (model TS-C180B6), and wall mounting bracket (model PRF-100 made by

Premier), should be used. Both parts are available from our Parts & Service Center.

You may call 1(800) 882-2345 or visit JVC accessory store at www.jvc.com.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings

Avoiding Ghost Images

Displaying ﬁxed images for extended periods of time can leave a subtle but temporary ghost

image on your screen. To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

For example...

• Stock-market report bars

• Shopping channel logos and pricing

displays

TV on

TV off

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images.

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or

digital television tuners/converters.

XYZ

Caring for the Cabinet

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly

moistened with water. You can add a few drops of mild liquid detergent to the water to help

remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

Caring for the Screen

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a

soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner

and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.

These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image

distortions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings (Continued...)

How to move the cabinet

Your fingers may become trapped under

the TV, causing injuries. Hold the TV at the

bottom in the middle, and do not allow the TV

to tilt up or down.

The TV may fall causing injuries. Hold the

bottom of the stand with your hand and tilt

the TV up or down.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Important Safety Precautions . 2

Warnings . . . . . . . . . . . . 5

Quick Setup . . . . . . . . . . . 9

Unpacking your TV . . . . . . . . . . . . 9

TV Models . . . . . . . . . . . . . . . . 10

TV Remote Control . . . . . . . . . . . 11

Getting Started . . . . . . . . . . . . . 12

Using the Stand . . . . . . . . . . . . 12

The Remote Control . . . . . . . . . . 13

Sound Adjust . . . . . . . . . 57

Sound Settings . . . . . . . . . . . . . 57

Adjust Sound Settings . . . . . . . . . 57

Reset

Clock Timers . . . . . . . . . . 58

Set Clock . . . . . . . . . . . . . . . . 58

On/Off Timer . . . . . . . . . . . . . . . 59

Button Functions . . . . . . . 60

Multi Screen Function . . . . . . . . . . 60

Twin . . . . . . . . . . . . . . . . . . 60

Index . . . . . . . . . . . . . . . . . 61

Freeze . . . . . . . . . . . . . . . . . . 61

Swap . . . . . . . . . . . . . . . . . 61

Select . . . . . . . . . . . . . . . . . . 61

Power . . . . . . . . . . . . . . . . . . 62

Number Buttons . . . . . . . . . . . . . 62

Connecting Your Devices

Interactive Plug In Menu . . . . . . . . 26

Remote Programming . . . . . 29

Setting CATV, VCR and DVD Codes

CATV or Satellite Codes . . . . . . . . 29

VCR Codes . . . . . . . . . . . . . . 30

DVD Codes . . . . . . . . . . . . . . 31

Search Codes . . . . . . . . . . . . . 32

Tune

Input . . . . . . . . . . . . . . . . . . . 62

TheaterPro D6500K . . . . . . . . . . . 62

Return+/TV . . . . . . . . . . . . . . . 63

Sound . . . . . . . . . . . . . . . . . . 63

Muting . . . . . . . . . . . . . . . . . . 64

Video Status . . . . . . . . . . . . . . . 64

Natural Cinema . . . . . . . . . . . . . . . 64

Sleep Timer . . . . . . . . . . . . . . . 65

ML/MTS . . . . . . . . . . . . . . . . . 65

Display . . . . . . . . . . . . . . . . . 66

C.C. . . . . . . . . . . . . . . . . . . . 66

Onscreen Menus . . . . . . . . 33

Using the Guide . . . . . . . . . . . . . 33

Onscreen Menu System . . . . . . . . . 34

Initial Setup . . . . . . . . . . 36

Auto Tuner Setup . . . . . . . . . . . . 36

Channel Summary . . . . . . . . . . . . 37

V-Chip . . . . . . . . . . . . . . . . . . 39

Set Lock Code . . . . . . . . . . . . . 45

Illumination

Channel +/-

Volume +/-

Language . . . . . . . . . . . . . . . . 46

Closed Caption . . . . . . . . . . . . . 47

Auto Shut Off . . . . . . . . . . . . . . 49

XDS ID . . . . . . . . . . . . . . . . . 49

Noise Muting . . . . . . . . . . . . . . 50

Front Panel Lock . . . . . . . . . . . . 50

Favorite . . . . . . . . . . . . . . . . . 67

Aspect . . . . . . . . . . . . . . . . . 68

Aspect Ratios

Menu . . . . . . . . . . . . . . . . . . 69

OK . . . . . . . . . . . . . . . . . . . 69

Back . . . . . . . . . . . . . . . . . . . 69

TV/CATV Slide Switch . . . . . . . . . . 70

VCR/DVD Slide Switch . . . . . . . . . 70

VCR Buttons . . . . . . . . . . . . . . . 70

DVD Buttons . . . . . . . . . . . . . . . 70

Light . . . . . . . . . . . . . . . . . . . 70

V1 Smart Input

Video Input Label

Position Adjustment . . . . . . . . . . . 52

Power Indicator . . . . . . . . . . . . . 52

Video-1 Monitor Out

Digital-In . . . . . . . . . . . . . . . . . 53

Digital-In Audio . . . . . . . . . . . . . 53

Picture Adjust . . . . . . . . . 54

Picture Settings . . . . . . . . . . . . . 54

Adjust Picture Settings . . . . . . . . . 54

Color Temperature . . . . . . . . . . . . 54

Color Management

Dynamic Gamma

Smart Picture . . . . . . . . . . . . . . 55

Digital VNR

MPEG NR

Reset . . . . . . . . . . . . . . . . . . 56

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Digital Setup . . . . . . . . . 71

Digital Setup . . . . . . . . . . . . . 71

Antenna Level . . . . . . . . . . . . . 71

Digital Sound . . . . . . . . . . . . . 72

Aspect Ratio . . . . . . . . . . . . . 72

Cable Card Application . . . . . . . . . 73

i.LINK Auto Play . . . . . . . . . . . 73

Software Update . . . . . . . . . . . 73

Digital Button Functions . . . 74

Digital CH D/A (Digital/Analog) . . . . . 74

Sub Channel . . . . . . . . . . . . . 74

i.LINK Menu . . . . . . . . . . . . . . . 75

Controller . . . . . . . . . . . . . 75

Device . . . . . . . . . . . . . . 76

Timer . . . . . . . . . . . . . . . 77

Reservation . . . . . . . . . . . . . . 77

Timer Edit . . . . . . . . . . . . . . 78

Guide . . . . . . . . . . . . . . . 79

Media Card Viewer . . . . . . 80

Readable Media Card . . . . . . . . . 80

Supported Card Media . . . . . . . . . . . 80

How to insert Media Card . . . . . . . . 81

How to operate Media Card Viewer . . . . 82

PHOTO

VIDEO

FILE

Operation Note

Specifications for Media Card Viewer . . 86

OSD Information . . . . . . 87

Weak Signal . . . . . . . . . . . . . 87

No Program . . . . . . . . . . . . . 87

Invalid Signal . . . . . . . . . . . . . 87

Cable Card Information . . . . 88

Cable Card Connection . . . . . . . . 88

Appendices . . . . . . . . . . 89

Troubleshooting . . . . . . . . . . . . . 89

Warranty

Specifications . . . . . . . . . . . . . 93

Notes . . . . . . . . . . . . . . . . . 94

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Unpacking your TV

Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your

new television, please check to make sure you have all of the following items. In addition to

this guide, your television box should include:

Two AA

Batteries

1 Remote Control

1 Television

POWER

TV CATV VCR DVD

ASPECT

MULTI SCREEN

TWIN

INDEX SELECT SLEEP

FREEZE

SWAP ML/MTS DISPLAY

INPUT

D/A

i.LINK MENU

RETURN+

TIMER

TUNE

THEATER

PRO

VIDEO

STATUS

SUB

CHANNEL

FAVORITE

SUB

NATURAL

CINEMA

SOUND

LIGHT

C.C.

Note: Your television

and/or remote

MUTING

GUIDE

VOL

control may differ

from the examples

illustrated here.

BACK

VCR CHANNEL

PREV NEXT

VCR DVD

POWER TV VCR

REW

PLAY

REC

STOP

PAUSE

OPEN CLOSE

STILL PAUSE

RM-C14G

2-WAY SPLITTER

Two Way Splitter x 1

RF Cable × 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

VIDEO

AUDIO

S-VIDEO

VIDEO

OVER

AUDIO

INPUT

S-VIDEO

VIDEO

OVER

AUDIO

HDMI1

S-VIDEO

VIDEO

OVER

AUDIO

DIO

S-

INPUT

S-

HDMI1

S-

MONIT

ADIOUT

Side Panel Diagram

MEDIA CARD SLOT

Illumination Lamp

(Page 46)

POWER

PROGRAM/TIMER

Note:

• To open the Media Card slot door, gently press the "PUSH-OPEN".

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Remote Control

POWER

TV CATV VCR DVD

ASPECT

MULTI SCREEN

TWIN

INDEX SELECT SLEEP

FREEZE

SWAP ML/MTS DISPLAY

INPUT

D/A

i.LINK MENU

RETURN+

TIMER

TUNE

THEATER

PRO

VIDEO

STATUS

SUB

CHANNEL

FAVORITE

SUB

NATURAL

CINEMA

SOUND

LIGHT

C.C.

MUTING

GUIDE

VOL

BACK

VCR CHANNEL

PREV NEXT

VCR DVD

POWER TV VCR

REW

PLAY

REC

STOP

PAUSE

OPEN CLOSE

STILL PAUSE

RM-C14G

Notes:

• For information on remote control buttons, see pages 60 - 70 and 74 - 79.

• i.LINK MENU, TIMER, SUB CHANNEL and GUIDE buttons are for digital channels. If your

TV is connected to an ATSC antenna or Digital Cable, you can use these buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Getting Started

These quick setup pages will provide you, in four easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Step 1 - Using the stand

This TV comes with a Table Top Stand already attached.

This stand can be used to adjust the direction of the TV screen 20° to the left or right.

Rotate the TV left or right

While holding the bottom of the stand with one hand,

use your other hand to hold the edge of the panel

and slowly adjust the direction of the TV stand.

Cable Holder

A cable holder which keeps your connection cables

tidy is attached on the back of the stand. Gently

squeeze the left and right of the cable holder, and pull

it to remove it from the stand. After putting the cables

in the cable holder, attach it to the back of the stand

again.

Remove the terminal cover

There are connection terminals behind the cover on the left in the back

of the TV. Remove the cover before connecting an antenna or other

devices. The cover can be removed by removing the hooks. When

replacing the cover, place the side of the cover against the TV and

insert the hooks.

Note:

• Leave the terminal cover off if they do not fit properly. Do not force

to replace the cover. Doing so may damage the connection cables

and cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Getting Started

Step 2 – The Remote Control

Before you can operate your remote control, you

first need to install the batteries (included).

Slide the cover on the back of the remote down

towards the bottom of the remote control. Insert

two batteries (included) carefully noting the “+”

and “–” markings, placing the “–” end in the unit

first. Slide the cover back into place.

When you change the batteries, try to

complete the task within three minutes. If you

take longer than three minutes, the remote

control codes for your VCR, DVD, and/or

cable box/satellite receiver may have to be

reset. See pages 29 - 32.

Key Feature Buttons

The four key feature buttons at the center of the remote can be

used for basic operation of the television. The top and bottom

buttons will scan forward and back through the available

channels. To move rapidly through the channels using

JVC’s Hyperscan feature, press and hold CH+ or CH–. The

channels will zip by at a rate of five channels per second. The

right and left buttons will turn the volume up or down. These

buttons are also marked with four arrows and are used with

JVC’s onscreen menu system. To use the onscreen menus,

press the MENU button.

MUTING

GUIDE

VOL

BACK

POWER

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner

of the remote. If this is the first time you are turning on the TV, the interactive

plug-in menu appears.

TV CATV

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if

you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 29 to 32 for instructions on

programming your remote control to operate a cable box, VCR or DVD player.

VCR DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Step 3 - Connecting your devices

To make these connections, you will use plugs like the ones illustrated below.

S-Video Cable

Component Cables

Composite Cables

Audio Cables

Used to make video

connections with S-Video

VCRs, Camcorders and DVD

players.

Used to connect audio/video

devices like VCRs, DVD players,

stereo amplifiers, game consoles,

etc.

Notes:

• These connections are examples.

• After you are finished connecting your devices, plug the power cord into the nearest power

outlet and turn on the TV.

• If you follow these diagrams and the television does not work properly, contact your local

cable operator.

• To connect a DVD player, see VCR Connection. A DVD player is optional

• If you have a satellite television system, refer to the satellite TV manual.

No VCR Connection

Cable or Antenna

Coaxial Cable

Output

(Attachment)

TV Rear Panel

Two-way Splitter

(Attachment)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

VCR Connection

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete

one set of connections (DVD or audio output) before starting the other to avoid accidentally

switching the cables.

• You may also connect the DVD player to Input 1.

Diagram #1

Cable or Antenna

Output

VCR

OUT

Two-Way Splitter

(Attachment)

OUT OUT

Coaxial Cable

(Attachment)

NUPT

-V

IPNUT

-V

TV Rear Panel

Green

Blue

Red

AUDIO OUT

OUT

DVD Player (OPTIONAL)

Note:

• If this connection setup does not work for you, try the connection setup on page 16.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Diagram #2

Cable or Antenna

Output

VCR

Two-Way Splitter

OUT OUT

OUT

Two-Way Splitter

(Attachment)

OUT OUT

Coaxial Cable

(Attachment)

NPUT

-V

INPUT

-V

TV Rear Panel

Green

Blue

Red

AUDIO OUT

OUT

DVD Player (OPTIONAL)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Camcorder

You can connect a camcorder to you televison by using the input jacks located on the back of

the television.

TV Rear Panel

-V

CAMCORDER

IPNUT

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on

the back of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on

the back of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

LEFT AUDIO IN on the back of the TV.

Headphone Connection

You can connect a pair of headphones to the television

using the headphone jack located on the side of the

television.

1) Plug a headphone jack into the headphone jack on

the television’s side panel.

TV Side Panel

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to an External Amplifier

TV Rear Panel

Speaker

-V

Amplifier

ADIOUT

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the

LEFT AUDIO INPUT on the amplifier.

2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the

RIGHT AUDIO INPUT on the amplifier.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

• DVI analog sound can not be outputted.

Connecting to Monitor/Recording Output Terminal

/RECOUT

MONIT

ADIOUT

VCR

TV Rear Panel

OUT

Notes:

• When you make this connection, set the Video-1 Monitor Out menu to ON. See page 52.

• If you are receiving ATSC/Digital Cable signal, it can be outputted to the S-Video output

terminal or Video (composite video) terminal.

• If you are receiving Analog TV signal, it can not be outputted to the S-Video output terminal.

• No signal will be outputted through the S-Video output terminal when you are not viewing

images coming from the composite video input terminal.

• No signal will be outputted through the Monitor/Recording output terminal when you are

viewing images from the component video input.

• If you try and record copyright protected programs using a VCR, you will not be able to

record correctly. This is because of the copyright protection system. If you are watching a

to the copyright protection system, and is not a malfunction of your TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to an AV Receiver using your television's

V1 Smart Input

By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture

sources from many different devices, without having to change or use the other input

connections on your TV. This allows you to free up the other input connections so you can

connect more devices to your television.

TV Rear Panel

NPUT

-V

INPUT

AV Receiver

MONITOR

OUT

INPUT

-V

MONITOR OUT

1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1

on the back of your television.

2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO

INPUT-1 on the back of your television.

3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y

VIDEO INPUT-1 on the back of your television.

4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb

VIDEO INPUT-1 on the back of your television.

5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr

VIDEO INPUT-1 on the back of your television.

Notes:

• Please refer to your AV Receiver instruction manual for more information on connecting your

speakers and other devices like a DVD player.

• Use your AV Receiver's remote to switch to the different devices you have connected.

• Some AV Receivers may not respond when the V1 Smart Input function is turned on.

• If you have video connections for each input device connected to your AV Receiver, you

should not connect them using both S-Video and Composite connection at the same time

when you are using V1 Input as the V1 Smart Input. In this case we recommend using the

S-Video connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Digital TV Receiver

By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in

their digital form.

DTV Decoder

TV Rear Panel

DIGITAL OUT

AUDIO OUT

TV Rear Panel

HMDI1

S-

RCEOUT

HDMI to DVI Cable

After the connections have been made,

tighten the screw to secure the cables.

1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to

the DIGITAL-IN on the back of your television.

2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO

DIGITAL-IN on the back of your television.

3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO

DIGITAL-IN on the back of your television.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television

with a DTV decoder.

Notes:

• The Analog Audio input can only be used with the HDMI 1 input.

• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance

may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer

to page 53.)

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

ANALOG. See "DIGITAL-IN AUDIO", page 53.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a HDMI Compatible Device

By connecting a HDMI compatible device, high definition pictures can be displayed on your

TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI

compatible device.

HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all

digital audio/video interface. HDMI provides and interface between any audio/video source,

such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a

digital television (DTV).

HDMI Compatible Device

TV Rear Panel

DIGITAL OUT

AUDIO OUT

HDMI Cable

1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to

the DIGITAL-IN on the back of your television.

Notes:

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

DIGITAL. See "DIGITAL-IN AUDIO", page 53.

• Some decoders may not respond depending on the equipment that you have connected

when it is connected to the HDMI.

• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to

480p/60Hz), the screen may turn green and there may be some distortion for a short time

until the signal becomes stable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to an amplifier using your optical output

You can connect an amplifier that has an optical digital input terminal by using an optical digital

cable from the optical output. The signal that is output can be PCM or Dolby Digital.

Television Rear Panel

Amplifier

1) Connect the optical cable from underneath the television to the back of the amplifier.

Notes:

• This terminal can only output digital audio.

• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in

the Digital Setup Menu. See page 72.

• Refer to your owners manual on using your amplifier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting an i.LINK compatible device to the back of

your television

i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to

exchange digital video signals, digital audio signals and device control signals bi-directionally

over a single cable. (For example, a JVC D-VHS VCR).

i.LINK refers to the IEEE1394-1995 industry specification and extensions thereof. The

is used for products compliant with the i.LINK standard.

logo

This projection television uses a four-pin i.LINK connector to input and output MPEG2 video

signals, audio signals and control signals.

TV Rear Panel

i.LINK Compatible Device

1) Connect the i.LINK cable from underneath the TV to the back of the i.LINK compatible

device.

Notes:

• Use only the S400 i.LINK cable when connection your devices.

• See page 75 on how to select the i.LINK device.

• Refer to your owners manual on using your i.LINK device.

• When recording or playing back video with an i.LINK device, if you perform the Auto Tuner

Setup, the video signal you are recording or playing back may stop or you may not be able

to perform the Digital Auto Tuner Setup.

• Your television can connect with i.LINK D-VHS decks and HD-Camcorders (JVC brand only).

If you connect other brand devices, with i.LINK cable, they will not work.

• It can play only the recorded contents in Digital Mode.

• Use only tapes bearing the DVHS (SVHS) mark for recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to the computer

This TV can be used as a computer screen. Use a commercially available D-SUB cable to

connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you

want to listen to the sound from the computer, use a commercially available RCA cable to

connect the INPUT-3 audio input terminal to the computer's audio output terminal.

TV Rear Panel

IPNUT

Notes:

• Refer to your computer manual for a detailed explanation of the connections concerning your

computer.

• Make sure that the connectors are facing the correct way when connecting.

• After connecting, tighten the two screws to fix the connectors in place.

Looking at the images from a computer

After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the

sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.

Notes:

• When the sound from the computer is connected to INPUT-3 by choosing external input

INPUT-3, the sound from the computer can be listened to, but the images from the computer

cannot be seen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Table of signals for each type of computer

Resolution

Vertical

Frequency

(Hz)

Horizontal

Frequency

(kHz)

640 x 480

(VGA)

60.0

31.5

48.4

1024 x 768

(XGA)

• Only the above formats are supported.

• Even with the above formats at 60 Hz, some problems may be experienced depending on

the quality of the synchronous signal. (Depending on the quality, some pictures may not be

displayed correctly).

• Apple Macintosh* computers are not supported.

When a picture is not displayed

With some computers, some problems can be solved by changing the settings. Check the

computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60

Hz, can not be used with this TV. Refer to the computer's instruction manual.

*Apple Macintosh is a registered trademark of Apple Computer, Inc.

Note:

• If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen.

It appears when the input is PC and it is a single screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Step 4 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The

plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can

choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your

television.

Notes:

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case use the onscreen menus to perform these settings. See pages 46, 58, 36.

• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically

switches to the LANGUAGE settings. You can choose to view your onscreen menus in three

languages: English, French (Français) or Spanish (Español).

LANGUAGE/LANGUE/IDIOMA

√®

To choose a language:

(English, Français or Español)

†

To NEXT (To set clock)

ENGLISH

SELECT OPERATE

EXIT

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may

precisely set your clock using the XDS time signal broadcast by most public analog

broadcasting stations. If you do not have this in your area, you will have to set the clock

manually. See manual clock set below. To set the clock using the XDS signal:

√®

†

To choose AUTO

To TIME ZONE

SET CLOCK

√®

To select your time zone: (Atlantic, Eastern,

Central, Mountain, Pacific, Alaska or

Hawaii)

MODE

AUTO

--: ----

TIME

TIME ZONE

DATE/YEAR

D.S.T.

ATLANTIC

JAN/01/05

†

√®

†

To move to D.S.T. (Daylight Savings Time)

To turn D.S.T. ON or OFF

To NEXT (To Auto Tuner Setup)

SELECT OPERATE

EXIT

Notes:

• D.S.T. can be used when it is set to ON in the SET CLOCK menu.

• Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically

adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00

am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last

Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose

AUTO, see auto clock set above.

√®

†

To choose MANUAL

To TIME

SET CLOCK

√®

†

To set the hour

To minute

MODE

MANUAL

√®

†

To set the minute

To TIME ZONE

TIME

--: ----

TIME ZONE

DATE/YEAR

D.S.T.

ATLANTIC

JAN/01/05

√®

To select your time zone: (Atlantic, Eastern,

Central, Mountain, Pacific, Alaska or Hawaii)

START CLOCK

SELECT OPERATE

†

√®

†

To DATE/YEAR

To set the month

To day

EXIT

√®

†

To set the day

To year

√®

†

√®

†

To set the year

To move to D.S.T. (Daylight Savings Time)

To turn D.S.T. ON or OFF

To START CLOCK

Note:

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the

active ones and skipping over blank ones or channels with weak signals. This means when you

scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. There are

two tuner modes to choose from, ANALOG or DIGITAL.

√®

To choose CABLE or AIR (or SKIP when

you skip Analog Auto Tuner Setup)

AUTO TUNER SETUP

IN ANALOG

TUNER MODE

IN DIGITAL

AIR

π†

To TUNER MODE (IN DIGITAL)

ATSC

TUNER MODE

√®

To choose ATSC or Digital Cable (or SKIP

when you skip Digital Auto Tuner Setup)

†

To START

START

SELECT OPERATE

After Analog Auto Tuner Setup is finished, Digital Auto

Tuner Setup starts.

EXIT

NOW

PROGRAMMING !

Now Programming...

When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your

quick setup is now complete. You can now begin watching your television, or you can continue

on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• If you want to cancel the Auto Tuner Setup, press the MENU button.

• Noise muting will not work during Auto Tuner Setup.

• If you choose SKIP, it finished without doing the Auto Tuner Setup.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending

on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is

normal.

The Quick Setup is complete

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD

player by using the instructions and codes listed below. If the equipment does not respond

to any of the codes listed below or to the code search function, use the remote control

supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off,

channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 32.

Cable Box

Codes

024

Digital

Satellite

Systems

Codes

Cable Box

Codes

ABC

Puser

RCA

032

Archer

032, 025

051, 032

022, 051

058, 059

024, 032, 025

029

061, 070

032

Echostar

(Dish Network) 115

100, 113, 114,

Cableview

Citizen

Curtis

Realistic

Regal

058, 064, 040,

041, 042, 045,

068

Express VU

G.E.

100, 113

106

Diamond

Eagle

Regency

034

G.I.

108, 120, 121,

122

Rembrandt

037, 032, 051,

038

Eastern

GC Brand

Gemini

General

034

032, 051

022, 043

065, 024, 025,

Gradiente

Hitachi

112

Samsung

051

104, 111

Scientific Atlanta 057, 058, 059

SLMark

051, 047

051, 056

032, 051

HNS (Hughes)

104

Instrument/Jerrold 026, 027, 020,

021, 022, 057,

023, 072, 074

Sprucer

Stargate

Magnavox

102, 103

Panasonic

Philips

105

Hamlin

040, 041, 042,

045, 058, 064

049, 024

Telecaption

Teleview

Texscan

Tocom

067

102, 103, 116

Hitachi

Macom

047, 051

044

Primestar

108

049, 050, 051,

054

Proscan

RCA

106, 109, 110

035, 036, 066,

074

Magnavox

033

Sony

107

030

Memorex

Movietime

Toshiba

Unika

050, 048

032, 025

Star Choice

Toshiba

104, 108

032, 051

039, 037, 048

101, 104, 117,

118, 119

Oak

Universal

Videoway

Viewstar

Zenith

022, 032

052

Panasonic

055, 056, 060,

071, 073

Uniden

102, 103

Paragon

Philips

063

029, 030

063, 046

046

028, 029, 030,

052, 053, 031,

069

Zenith/Drake

Satellite

Pioneer

Pulsar

047, 062

051, 032

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,

rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the VCR.

• If your VCR does not respond to the first code, try the others listed. If it does not respond to

any of the codes, try the search codes function on page 32.

• After you program your remote, some VCR buttons may not work properly. If so, use the

VCR’s remote.

• To record, hold down the REC button on the remote and press PLAY.

Codes

035

027, 032, 095

Codes

VCR

Admiral

VCR

Marantz

Marta

003, 004, 005

064

Samsung

037, 060, 062,

033, 089

Aiwa

Akai

Samtron

Sansui

089

029, 072, 073, Memorex

074

024, 067

003, 026, 020,

052

038, 040, 047,

048, 041, 042

MGA

Audio Dynamic 003, 005

Sanyo

Scott

063, 067, 091,

071

Bell & Howell

Broksonic

Canon

063, 071

020, 026, 094

023, 025

043

Minolta

058, 045, 093

Mitsubishi

038, 040, 047,

048, 041, 042,

078, 090

059, 060, 062,

067, 038, 040,

047, 048, 026,

020

CCE

Multitech

NEC

047, 027, 062

Citizen

064

003, 004, 005,

000

Sears

063, 064, 065,

066, 058

Craig

063, 029, 064

Curtis Mathes

045, 024, 027,

093

Olympic

024, 023

Sharp

035, 036, 080,

088

Optimus

028, 021, 035,

064

Daewoo

043, 059, 024,

092

Shintom

075

026, 020

Orion

DBX

003, 004, 005

Signature 2000 027, 035

Panasonic

023, 024, 021,

022

Dimensia

Emerson

045, 093

Singer

Sony

075

043, 026, 077,

061, 025, 042,

020, 076

Penney

024, 058, 045,

063, 003, 004,

005, 093

028, 029, 030,

053, 054, 055

SV 2000

Sylvania

027

Fisher

Funai

063, 066, 067,

065, 071, 091

Pentax

Philco

058, 005, 045,

093

031, 023, 024,

027

027, 026, 020,

000

031, 024, 027,

023, 026, 020,

043

Symphonic

Tashiro

Tatung

027, 081

064

033, 045, 024

G.E.

003, 004, 005

Philips

031, 023, 024,

086

Go Video

037, 051, 049,

050, 089

Teac

003, 004, 027,

005

Pioneer

Proscan

023

Goldstar

064

Technics

Teknika

021, 022, 023,

024

045, 058, 023,

024, 031, 046,

059, 060, 093,

033, 087

Gradiente

083, 084, 081,

000, 001

024, 027, 070

Hitachi

023, 045, 058,

093, 027, 081

Thomson

Toshiba

033, 096

Quasar

021, 022, 023,

024

Instant Replay 024, 023

059, 046, 079

Radio Shack

033, 024, 063,

036, 067, 040,

027

Jensen

JVC

003

Vector Research 005

003, 004, 005,

000, 001, 002,

006, 007

Wards

Yamaha

Zenith

035, 036, 067,

044, 064

033, 045, 058,

023, 024, 031,

046, 059, 060,

083, 084, 085,

087, 093, 096

RCA

063, 003, 004,

005

Kenwood

003, 004, 064,

005

044, 082, 064,

094

064

Realistic

024, 063, 036,

067, 040, 027

LXI

027, 064, 058,

065, 066, 063,

067

Magnavox

031, 023, 024,

086

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,

rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the DVD player.

• If your DVD player does not respond to the first code, try the others listed. If it does not

respond to any of the codes, try the search codes function on page 32.

• After you program your remote, some DVD buttons may not work properly. If so, use the

DVD player’s remote.

DVD Player

Aiwa

Codes

DVD Player

Mintek

Codes

057

DVD Player

Sharp

Codes

028

043

Apex

040, 054,

055

Mitsubishi

025

Silvania

038

Bose

058

Next Base

Onkyo

056

SMC

Sony

048

024, 045,

046, 047

Denon

020, 037

041, 052

Funai

038

032

053

Oritron

044

Technics

Thomson

Toshiba

020

021

023

Go–Video

Panasonic

Philips

020

Harman

Kardon

023, 036

Hitachi

JVC

031

Pioneer

Polk Audio

Raite

022

036

033

Venturer

Vialta

051

050

000

Kenwood

035, 020

Wave

042

Yamaha

Zenith

020, 049

027, 032

KLH

051

039

050

RCA

021, 026

034

Konka

Koss

Sampo

Samsung

030

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.

3) Press the POWER button on the remote, and see if the cable or satellite box responds.

4) If there was a response, press RETURN+/TV. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use

the remote control that came with your equipment.

5) Press RETURN+/TV to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or

“DVD”.

2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds

and release.

3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4) If there was a response, press RETURN+/TV. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for

the DVD player), and there is no response, use the remote control that came with your

equipment.

5) Press RETURN+/TV to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your

new television. The ones you will see most frequently are:

π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–

buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√® Left and right arrows mean press the VOLUME+ or VOLUME- buttons to move left or right

to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote

control. (Button names appear in SMALL CAPITAL LETTERS.)

The “helping arrow” icon points to the highlighted or selected item in a menu.

To bring up the onscreen menu, press the MENU button on the remote control. The item that

appears in green is the one currently selected. If you use the Menu button on the TV’s side

panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT

will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will

appear the first time the TV is plugged in.

INITIAL SETUP

AUTO TUNER SETUP

CHANNEL SUMMARY

V-CHIP

SET LOCK CODE

(4/5)

EXIT

SELECT OPERATE

Note:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen

displays.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

The Onscreen Menu System

Your television comes with JVC’s onscreen menu system. The onscreen menus let you make

adjustments to your television’s operation simply and quickly. Examples of the onscreen

menus are shown on the next page. Detailed explanations on using each menu follow later in

this guide. For information about the interactive plug-in Menu, see pages 26 - 28.

The Onscreen Menu System

To open the onscreen menu system, press the MENU button on the remote control. You

navigate within the onscreen menus by using the four directional arrow buttons on the remote

control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions

will not operate when the onscreen menu is active).

The selected feature and option on a menu screen are highlighted in a different color.

Selected Option

(Green)

ENG. FRAN. ESP.

LANGUAGE

Selected Option

(Blue)

CLOSED CAPTION

To move to a different feature use the π† arrows to move up or down the list. When you

press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen

will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing

MENU on the remote control will close the onscreen menu system and return you to normal

television viewing.

Each menu and its features will be discussed in the following pages of this guide.

Notes:

• If you do not press any buttons for a few seconds, the onscreen menu will automatically

shut off.

• Button names in this guide are shown in SMALL CAPITAL LETTERS.

• Menus may appear in different sizes onscreen depending on the aspect ratio selected.

• Some menu items may not appear in menu screens when certain aspect ratios or inputs

are selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Press the MENU button

INITIAL SETUP

AUTO TUNER SETUP

CHANNEL SUMMARY

V-CHIP

ILLUMINATION

LANGUAGE

LOW

NOISE MUTING

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

OFF

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

SET LOCK CODE

OFF

(4/5)

EXIT

(3/5)

(2/5)

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

INITIAL SETUP 04

INITIAL SETUP 03

INITIAL SETUP 02

INITIAL SETUP

VIDEO-1 MONITOR OUT

DIGITAL-IN

DIGITAL SETUP

OFF

AUTO

MEDIA CARD VIEWER

DIGITAL

DIGITAL-IN AUDIO

(5/5)

EXIT

(1/5)

SELECT OPERATE

EXIT

INITIAL SETUP 05

INITIAL SETUP 01

PICTURE ADJUST

CLOCK TIMERS

STANDARD

SET CLOCK

ON OFF TIMER

TINT

COLOR

PICTURE

BRIGHT

DETAIL

ENERGY SAVER MODE

(1/2)

EXIT

SELECT OPERATE

PICTURE ADJUST 01

CLOCK/TIMERS

PICTURE ADJUST

SOUND ADJUST

STANDARD

DIGITAL VNR

MPEG NR

STANDARD

COLOR TEMPERATURE

COLOR MANAGEMENT

DYNAMIC GAMMA

SMART PICTURE

HIGH

AUTO

BASS

OFF

TREBLE

BALANCE

RESET

(2/3)

(3/3)

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

SELECT OPERATE

PICTURE ADJUST 02

PICTURE ADJUST 03

SOUND ADJUST

Notes:

• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the

digital-in terminal and the picture is being displayed on the screen.

• SMART PICTURE menu cannot be displayed when DYNAMIC is selected for Video Status.

• When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu

between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.

• Regarding the digital setup menu, see page 71.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 28 as the interactive plug-in menu. If you

need to run the auto tuner setup again, follow the steps below.

Press the MENU button

AUTO TUNER SETUP

IN ANALOG

π†

√®

π†

√®

π†

√®

To AUTO TUNER SETUP

TUNER MODE

IN DIGITAL

AIR

To operate

ATSC

TUNER MODE

To TUNER MODE (IN ANALOG)

To choose CABLE, AIR or SKIP

To TUNER MODE (IN DIGITAL)

To choose ATSC, DIGITAL CABLE or SKIP

PRESS OK TO START

SELECT OPERATE

EXIT

Press the OK button to start

Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the

message PROGRAMMING OVER! appears onscreen.

Press the Menu button when finished

Note:

• Digital Auto Tuner Setup will take approximately 14 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV.

Regarding analog channels, you can add or delete channels from the line-up or prevent any

unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the

only channels that will appear are the ones that are broadcasting.

Press the MENU button

To CHANNEL SUMMARY

To operate

Analog Channels

CHANNEL SUMMARY

π†

CHNO. SCAN

√®

HBO

The Channel summary screen will now be displayed with

the channels set to scan marked with an “√”. Regarding

analog channels, you can delete channels from the scan

by removing the “√”. If any channels were missed during

auto tuner setup and you wish to add them, you may by

placing an “√” next to the channel number.

MTV

A&E

SELECT

OPERATE

EXIT

Digital Channels

• Digital channels can not be added to the channel

summary if the auto tuner setup did not find them.

Channel Summary Digital

CH No.

D01

Scan

Station Name

FOX

π†√® To the SCAN column

Press the OK button to include or delete from

scan

D02

ABC

D02

CNN

D10-1

D10-2

D12345

NBC

BOX

Press the MENU button when finished

NHK

BACK

Operate

Back

Exit

Note:

• The number of a digital channel may change,

depending on the time of some broadcastings. If

this channel existed and now had disappeared, the

lock channel or scanned channel by the channel

summary for that channel will be cancelled.

• When the Cable Card is not

inserted into the Cable Card

Slot:

If you are watching analog

channels, the above screen

appears.

If you are watching digital

channels, the below screen

appears.

• When the Cable Card is

inserted into the Cable Card

Slot:

Below screen appears

Both analog and digital

channels are listed, but the

background video is not

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

How to set the channel label. (This is only for analog broadcasting.)

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY

To operate

To the ID column

CHANNEL 09

RESET

Press the OK button to enter

PRESS TO FINISH

√®

π†

To select the character you want

To move to the next space

SELECT OPERATE

EXIT

...continue to follow these directions for all four

spaces

Press the OK button to finish

Your characters are now set

Press the MENU button when finished

If you want to reset the characters you set:

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY

To operate

To the ID column

Press the OK button to enter

To select RESET

π†

Press the OK button to finish

Your characters are now reset

Notes:

• You can use characters for: Alphabet, numbers, marks and spaces.

• It is possible to set the maximum of 40 channel labels.

• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will

appear.

You can block access to a channel by activating the channel lock.

Press the MENU button

π†

To CHANNEL SUMMARY

To operate

√®

π†√® To the Lock Column (

)

Press the ZERO button to lock or unlock that channel

Press the MENU button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter the

THIS CHANNEL IS LOCKED BY

CHANNEL GUARD.

Lock Code using the 10 key pad.

If the wrong code is entered, the message

“INVALID LOCK CODE!” will flash on the screen.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

The channel cannot be accessed until the correct code

is entered.

NO. - - - -

Notes:

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 45.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content

that you feel to be inappropriate for children, based on US and Canada rating guidelines.

V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.

Note: Some programs, and movies are broadcast without a ratings signal. Even if you set

up V-CHIP ratings limits, these programs will not be blocked. See page 40 for information on

how to block unrated programs.

Note (for Canadian viewers): The V-Chip function is based on specifications designed for

the United States and therefore may not work properly in Canada.

You can customize the V-Chip settings of your television to match your personal tastes. The

V-Chip menu below is the starting point for your V-Chip settings

You can use US V-Chip settings (for programming broadcast from the United States), Canadian

V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use

any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting

each of the three V-Chip formats appear in the next six pages along with descriptions of the

rating categories.

To access the rating categories:

Press the MENU button

V-CHIP

OFF

π†

√®

To V-CHIP

To operate (Lock icon

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

will appear)

Press ZERO to access the V-Chip menu

VIEW

√®

To turn V-Chip ON or OFF (V-Chip must be

turned ON for rating settings to operate)

π†

To move to SET US TV RATINGS,

SET MOVIE RATINGS, or

SELECT OPERATE

EXIT

SET CANADIAN RATINGS (see following

pages for descriptions of each item)

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal.

Programming on television stations which do not broadcast rating signals will be placed in the

“Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins

• News

• Public Service Announcements

• Sports

• Locally Originated Programming

• Political Programs

• Religious Programs

• Weather

• Some Commercials

Note:

• TV programs or movies that do not have rating signals will be blocked if the unrated category

is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

Press the MENU button

V-CHIP

OFF

V-CHIP

π†

To V-CHIP

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

√®

To operate (The lock icon

appears)

Press ZERO to access V-Chip setup options

VIEW

π†

To UNRATED

√®

To VIEW or BLOCK

SELECT OPERATE

EXIT

Press MENU when done

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS

Programs with the following ratings are appropriate for children.

❒ TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including

children ages 2 - 6.

❒ TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs

may contain some mild fantasy violence or comedic violence, which children should be able

to discern from reality.

Programs with the following ratings are designed for the entire audience.

❒ TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or no

violence, no strong language, and little or no sexual dialog or situations.

❒ TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive

sexual dialog or situations. It is recommended that parents watch these programs first, or

with their children.

❒ TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14

including possible intense violence, sexual situations, strong coarse language, or intensely

suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

❒ TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17

years of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of content

are also supplied with the V-Chip rating. These types of content may also be blocked. The

content types are:

• V/FV is for VIOLENCE/FANTASY VIOLENCE

• S stands for SEXUAL CONTENT

• L stands for strong LANGUAGE

• D stands for suggestive DIALOG

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Setting US V-Chip Ratings

Press the MENU button

V-CHIP

OFF

π†

√®

To V-CHIP

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

To operate (lock icon

appears)

Press ZERO to access the V-Chip menu

VIEW

√®

π†

√®

To turn V-Chip ON or OFF

To move to SET US TV RATINGS

To operate

SELECT OPERATE

EXIT

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and

press the π† or √® to move the cursor to the correct location. Press OK to turn the locking

feature on or off. An item is locked if the

icon appears instead of a “—”.

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that

column and add a lock icon. Once you’ve put a lock on the top row, everything in that column

is automatically locked.

SET US TV RATINGS

π†√® To the TV 14 Column

TV TV

MA 14

Press the OK button to lock

Press the MENU button when finished

V/FV

Note:

• If you want to change the setup, move the cursor to

the top column and change the lock icon to “—” by

pressing OK again. You may then select individual

categories to block.

EXIT

SELECT

OPERATE

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Movies Ratings

❒ NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries

which do not use the MPAA ratings system. Other NR films may be from amateur producers

who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children’s

programming, foreign programs, or adult material.

❒ G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content,

violence, or language that would be unsuitable for audiences of any age.

❒ PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence,

some brief nudity, and strong language. The contents are not deemed intense.

❒ PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may

include more explicit sexual, language, and violence content than movies rated PG.

❒ R – Restricted

These films contain material that is explicit in nature and is not recommended for

unsupervised children under the age of 17.

❒ NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children

to view. Content can consist of strong language, nudity, violence, and suggestive or explicit

subject matter.

❒ X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (Lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET MOVIE RATINGS

To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

SET MOVIE RATINGS

π†√® To the X Column

Press the OK button to lock

π†√® To the NC-17 Column

Press the OK button to lock

Press the MENU button to finish

_G13

_C17

EXIT

SELECT

OPERATE

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Canadian V-Chip Ratings

❒ E – Exempt

Exempt programming includes: news, sports, documentaries and other information

programming, talk shows, music videos, and variety programming.

❒ C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive

behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or

unrealistic in nature.

❒ C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low

intensity and will show the consequences of the acts. There will be no offensive language,

nudity or sexual content.

❒ G – General Audience

Programming will contain little violence and will be sensitive to themes which could affect

younger children.

❒ PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger

children. Parents may consider some content not appropriate for children aged 8-13.

❒ 14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and

early teens. Programming may contain mature themes and scenes of intense violence.

❒ 18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET CANADIAN RATINGS ENG (for English)

To enter ratings menu

For example:

To block viewing of programming rated 14+ and 18+:

SET CANADIAN RATINGS ENG

√®

To the 18+ Column

Press the OK button to lock

18+

14+

√®

To the 14+ Column

Press the OK button to lock

Press the MENU button to finish

EXIT

SELECT

OPERATE

Note:

• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 44 in the

French side of this user’s guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes

preset with a lock code of “0000”. You may change the code to any four-digit number you wish.

To change the lock code, follow the steps below.

Press the MENU button

SET LOCK CODE

π†

To SET LOCK CODE

To operate (lock icon

LOCK CODE

0000

√®

appears)

Press ZERO to access the lock code

The first digit will be highlighted

PRESS

TO FINISH

SELECT OPERATE

EXIT

√®

π†

To select the number

To move to the next digit

Continue to follow these directions for all four numbers

Press the OK button to finish (your lock code is now set)

Press the Menu button when finished

When a viewer attempts to watch a blocked channel, this message appears:

THIS PROGRAMMING EXCEEDS

YOUR RATING LIMITS.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

NO. - - - -

The channel will remain blocked until the correct lock code is entered (see above for

information on setting your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Illumination

The illumination feature allows you to adjust the brightness of the light on the front of the

television. When you turn the power on the televison, the front panel light remains on when

illumination is set to LOW or HIGH.

Press the Menu button

INITIAL SETUP

π†

To ILLUMINATION

ILLUMINATION

LANGUAGE

LOW

√®

To choose HIGH, LOW or OFF

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

Press the MENU button when finished

OFF

(3/5)

SELECT OPERATE

EXIT

Language

The language function is described on page 26 as the interactive plug-in menu. If you need to

choose the language again, follow the steps below.

Press the Menu button

INITIAL SETUP

π†

To LANGUAGE

ILLUMINATION

LANGUAGE

LOW

√®

To choose a language: ENG. (English), FRAN.

(French) or ESP. (Spanish)

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

Press the MENU button when finished

(3/5)

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Closed Caption

Many broadcasts now include an onscreen display of dialog called closed captions. Some

broadcasts may also include displays of additional information in text form. Your television can

access and display this information using the closed caption feature. To activate the closed

caption feature, follow the steps below. There are three methods. When you are watching

analog channels, you can perform Analog Setting of closed caption. When you are watching

digital channels, you can perform Digital Auto Setting or Digital Manual Setting.

Analog Setting

Press the MENU button

CLOSED CAPTION

π†

√®

π†

√®

π†

√®

To CLOSED CAPTION

To enter

To MODE

To select CAPTION or TEXT in MODE

To CAPTION or TEXT

To select a caption (CC1 to CC4) or text

channel (T1 to T4)

MODE

TEXT

CC1

CAPTION

TEXT

PRESS TO FINISH

SELECT OPERATE

EXIT

Press the OK button to save

Press the MENU button when finished

Digital Auto Setting

Press the MENU button

Digital Closed Caption

Preview

π†

√®

π†

√®

To CLOSED CAPTION

To enter

To Type

Closed Caption Sample

Type

AUTO

Service

Appearance

To select Auto, Advanced or Basic

Auto: Shows closed caption a priority for

digital channels over analog channels. It is

set automatically.

Cancel

Set

BACK

Select

Operate

Back

Exit

Advanced: Shows only the digital closed

caption.

Basic: Shows only the analog closed

caption.

Digital Closed Caption

Preview

Appearance

Closed Caption Sample

Appearance Mode

Auto

π†

√®

π†

√®

π†

To Service

Font

To select 1, 2, 3, 4, 5 or 6

To Appearance

To enter

To select Auto

To Set

Colors

Opacities

Cancel

Set

BACK

Select

Operate

Back

Exit

Press the OK button to save

The font/type and color are set automatically.

Press the MENU button when finished

Note:

• If you want to cancel the settings, select cancel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Digital Manual Setting

Press the MENU button

Digital Closed Caption

Preview

Appearance

π†

To CLOSED CAPTION

Closed Caption Sample

√®

π†

√®

π†

√®

π†

√®

π†

√®

π†

√®

To enter

To Type

Appearance Mode

Manual

Font

Colors

Opacities

To select Auto, Advanced or Basic

To Service

To select 1, 2, 3, 4, 5 or 6

To Appearance

To enter

To select Manual

To Font

To enter

To select Font Size or Font Style

To select the setting you like

Cancel

Set

BACK

Select

Operate

Back

Exit

Digital Closed Caption

Preview

Appearance

Closed Caption Sample

Font Size

Standard

Auto

Appearance Mode

Font

Manual

Font Style

Colors

Font Size: Auto, Standard, Large or Small

Cancel

Set

Opacities

Cancel

Font Style: Auto, Serif Mono, Serif, Sanserif mono,

Sanserif, Casual, Cursive or Small Capital

π†

Set

BACK

Select

Operate

Back

Exit

To Set

Press the OK button to save

π†

√®

π†

√®

To Colors

To enter

To select Text, Edge or Background

To select the setting you like

Digital Closed Caption

Preview

Appearance

Closed Caption Sample

Text

Appearance Mode

White

Black

Manual

Edge

Auto, White, Black, Red, Green, Blue,

Yellow, Magenta or Cyan

Font

Background

Cancel

Colors

Opacities

Set

π†

To Set

Cancel

Set

BACK

Press the OK button to save

Select

Operate

Back

Exit

π†

√®

π†

√®

To Opacities

To enter

To select Text/Edge or Background

To select Auto, Transparent, Translucent,

Solid or Flashing

All fonts used for digital closed

caption and digital menus are

licensed from Monotype Imaging

Inc.

π†

To Set

Press the OK button to save

Press the MENU button when finished

Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs

may include additional text information which is usually found on text channel T1. The other

channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are

playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the program.

• To select the mode, press the C.C. button. See page 66.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel the

TV is on.

INITIAL SETUP

Press the MENU button

ILLUMINATION

LANGUAGE

LOW

π†

√®

To AUTO SHUT OFF

To turn ON or OFF

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

Press the MENU button when finished

• If the channel that you have on does not receive a

signal for more than one minute, the blinking text

“NOT RECEIVING A SIGNAL” appears on the screen,

and starts the countdown. If no signal is being

received within 10 minutes, the TV shuts itself off.

(3/5)

SELECT OPERATE

EXIT

• When i.LINK is displayed, Auto Shut Off will not work.

XDS ID

XDS ID Display provides a channel’s call letters, the network’s name, and even a program

name. The XDS ID information is provided by the broadcaster.

Press the MENU button

INITIAL SETUP

π†

√®

To XDS ID

To turn ON or OFF

ILLUMINATION

LANGUAGE

LOW

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

Press the MENU button when finished

OFF

(3/5)

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Noise Muting

This feature inserts a blank grey screen over channels which are not broadcasting or are too

weak to be received clearly.

Press the MENU button

INITIAL SETUP

NOISE MUTING

FRONT PANEL LOCK

V1 SMART INPUT

π†

√®

To NOISE MUTING

To turn noise muting ON or OFF

OFF

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

Press the MENU button when finished

OFF

(2/5)

Note:

SELECT OPERATE

EXIT

• Noise muting will not work during auto tuner setup or

when you operate channel summary.

• Noise muting will not work when the digital TV or i.LINK is displayed.

Front Panel Lock

This allows you to lock the keys on the side of the TV, so that a child may not accidentally

change your viewing preferences.

Press the MENU button

INITIAL SETUP

NOISE MUTING

π†

√®

To FRONT PANEL LOCK

To turn ON or OFF

OFF

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

Press the MENU button when finished

You can turn off this feature in the following ways:

OFF

(2/5)

• Unplug the power cord, and plug it back in. Do this if

your batteries die, or you lose your remote control.

SELECT OPERATE

EXIT

• Use the remote control.

• Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD

for FRONT PANEL LOCK will appear.

Note:

• To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will

remain ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

V1 Smart Input

This feature is used if you have connected an AV Receiver to your television. By turning this

feature on, your television can automatically detect the signal source from your components

that are connected to your AV Receiver.

Press the MENU button

INITIAL SETUP

NOISE MUTING

π†

√®

To V1 SMART INPUT

To turn ON or OFF

OFF

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

Press the MENU button when finished

OFF

Notes:

(2/5)

• If you do not have an AV Receiver connected to your

television, turn this feature OFF.

SELECT OPERATE

EXIT

• Some AV Receivers may not work with this function.

Video Input Label

This function is used to label video input connections for the onscreen displays.

Press the MENU button

To VIDEO INPUT LABEL

To operate

INITIAL SETUP

π†

√®

π†

√®

NOISE MUTING

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

OFF

To select the desired video input

OFF

To select the desired preset input label (see

chart below)

(2/5)

SELECT OPERATE

EXIT

Press the OK button to save

VIDEO INPUT LABEL

Press the MENU button when finished

VCR

VIDEO-1

DVD

SAT

STB

DVD

VIDEO-2

VIDEO-3

DIGITAL-IN1

DIGITAL-IN2

Preset

Labels

Select when...

PRESS TO FINISH

VCR

You have a VCR connected to the video input

SELECT OPERATE

EXIT

DVD

You have a DVD connected to the video input

DVHS

STB

You have a Digital VCR connected to the video input

You have a Set-top Box connected to the video input

You have a Satellite Receiver connected to the video input

You have an Amplifier connected to the video input

You have a Video Game connected to the video input

You have a Video Camera connected to the video input

You have a Video Disc player connected to the video input

SAT

AMP

GAME

CAM

DISC

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically

when the aspect is set to panorama or cinema.

Press the MENU button

π†

√®

To POSITION ADJUSTMENT

To enter

π†√® To adjust the position

Press the MENU button to finish

Notes:

RESET

EXIT

OPERATE

• To reset the adjustment to the center, press the

OK button.

• When the arrow disappears, while you are adjusting the position, the position is at it’s

maximum limit.

• If you select regular, full, full native and slim size with aspect or Multi Screen, position

adjustment option is not seen.

• When you change the screen size, perform the position adjustment again.

• Position adjustment allows you to adjust the screen position vertically and horizontally when

the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals, or when PC

mode is set.

Power Indicator

Power indicator allows you to adjust the brightness of

INITIAL SETUP

the power indicator

Press the MENU button

π† To POWER INDICATOR

NOISE MUTING

OFF

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

POWER INDICATOR

√®

To adjust POWER INDICATOR LOW, HIGH

or OFF

OFF

(2/5)

SELECT OPERATE

EXIT

Note:

• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.

Video-1 Monitor Out

This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,

should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to

"ON".

INITIAL SETUP

Press the MENU button

OFF

AUTO

DIGITAL

VIDEO-1 MONITOR OUT

DIGITAL-IN

DIGITAL-IN AUDIO

π† To VIDEO-1 MONITOR OUT

√® To select ON or OFF

Press the MENU button to finish

(1/5)

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture

signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p

picture signal is being displayed on the screen. There are two types of 480p picture signals:

640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted

by selecting either SIZE1 or SIZE2.

INITIAL SETUP

Press the MENU button

π† To DIGITAL-IN

OFF

AUTO

DIGITAL

VIDEO-1 MONITOR OUT

DIGITAL-IN

DIGITAL-IN AUDIO

√® To enter

π† To select AUTO, SIZE1 or SIZE2

Press the MENU button to finish

(1/5)

SELECT OPERATE

EXIT

Notes:

• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the

Digital-In terminal and the picture is being displayed on the screen.

• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the

televison will select "SIZE1" or "SIZE2" automatically.

Digital-In Audio

This feature is used if you have a DTV or HDMI

compatible component connected to your TV.

INITIAL SETUP

OFF

AUTO

VIDEO-1 MONITOR OUT

DIGITAL-IN

Press the MENU button

DIGITAL

DIGITAL-IN AUDIO

π†

To DIGITAL-IN AUDIO

√®

To select ANALOG, DIGITAL or AUTO

Press the Menu button when ﬁnished

(1/5)

SELECT OPERATE

EXIT

Notes:

• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If

your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.

• Refer to your DTV or HDMI component’s instruction manual for more information.

• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page

72.

• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,

depending on the audio input from the HDMI.

• When your input is DIGITAL-IN2, DIGITAL-IN AUDIO cannot be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or

subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker

or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

ENERGY SAVER MODE

The energy saver mode adjusts the level of brightness on the TV screen.

Adjust the Picture Settings

Press the MENU button

PICTURE ADJUST

π†

To TINT, COLOR, PICTURE, BRIGHT, DETAIL

or ENERGY SAVER MODE

To enter

TINT

STANDARD

COLOR

PICTURE

BRIGHT

DETAIL

√ ®

+02

TINT

ENERGY SAVER MODE

(1/2)

EXIT

√ ®

π†

To adjust the setting

To move to the next setting

SELECT OPERATE

Press the MENU button when finished

Color Temperature

You can decide how strong or dull the colors appear on the TV screen.

Press the MENU button

PICTURE ADJUST

STANDARD

π†

√®

To COLOR TEMPERATURE

To enter

COLOR TEMPERATURE

COLOR MANAGEMENT

DYNAMIC GAMMA

SMART PICTURE

HIGH

OFF

COLOR TEMPERATURE

LOW

HIGH

(2/3)

π†

To set LOW or HIGH

SELECT OPERATE

EXIT

Press the MENU button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Color Management

This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated

to produce natural hues.

Press the MENU button

COLOR MANAGEMENT

π†

√®

π†

To COLOR MANAGEMENT

To enter

To select the mode “ON" or "OFF"

OFF

Press the MENU button when finished

Dynamic Gamma

JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has

many dark areas, and makes it easier to see the bright areas when a picture has many bright

areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness

balance, especially in dark areas where the level of greyscale is often lost, turning completely

to black DGC automatically enhances the detail in these dark areas providing a more dynamic

image with ﬁner detail, so the optimum picture settings are automatically set for each picture.

Normally use with DGC on.

Press the MENU button

DYNAMIC GAMMA

π†

√®

π†

To DYNAMIC GAMMA

To enter

To turn ON or OFF

OFF

Press the MENU button when finished

Smart Picture

Smart Picture detects the APL (Average Picture Level) and adjusts the contrast suitable for

what you are watching.

Press the MENU button

SMART PICTURE

π†

√®

π†

To SMART PICTURE

To enter

To select the mode "ON" or "OFF"

Press the MENU button when finished

OFF

Note:

• When you have "DYNAMIC" selected in the "VIDEO STATUS", Smart Picture is not selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Digital VNR

This function can be selected to change the effect of Digital NR.

Press the MENU button

DIGITAL VNR

AUTO

MIN

π†

√®

π†

To DIGITAL VNR

To enter

To select the effect you like.

MAX

OFF

AUTO: adjusts the effect of VNR automatically.

MIN: adjusts the effect of VNR to minimum.

MAX: adjusts the effect of VNR to Maximum.

OFF: turns the effect of VNR off.

Press the MENU button when finished

MPEG NR

This function blocks noise removal and mosquito NR simultaneously.

Press the MENU button

MPEG VNR

π†

√®

π†

To MPEG NR

To enter

To select ON or OFF.

OFF

Press the MENU button when finished

Reset

Reset resets all picture adjustments (tint, color, picture, bright, detail, energy saver mode, color

temperature, color management and dynamic gamma and smart picture) at once to the default

settings.

Press the MENU button

PICTURE ADJUST

DIGITAL VNR

MPEG NR

STANDARD

π†

√®

To RESET

To enter

AUTO

The onscreen menu disappears for a moment,

and then the settings are reset to the default

setting for all the picture adjustments.

RESET

(3/3)

Press the MENU button when finished

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with

the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

Adjust the Sound Settings

Press the MENU button

SOUND ADJUST

π†

√ ®

π†

To BASS, TREBLE or BALANCE

To adjust the setting

To move to the next setting

BASS

TREBLE

BALANCE

Press the MENU button when finished

RESET

SELECT OPERATE

EXIT

Note:

• You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as

the default setting when you select reset. See page 56.

• You can adjust BALANCE only when A.H.S. is off. See page 63.

Reset

Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.

See page 56 on how to use reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

Set Clock

The set clock function is described on page 27 as the interactive plug-in menu. You can choose

to set the clock automatically or manually. If you need to set the clock again, follow the steps

below.

Press the MENU button

π†

√®

To SET CLOCK

To enter

When you set the clock automatically, choose AUTO by pressing the

√

arrows.

π†

√®

To TIME ZONE

To select your time zone

ATLANTIC

SET CLOCK

EASTERN

CENTRAL

MOUNTAIN

HAWAII

ALASKA

PACIFIC

MODE

AUTO

--: ----

π†

√®

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

TIME

TIME ZONE

DATE/YEAR

D.S.T.

ATLANTIC

JAN/01/05

Press OK to finish

PRESS TO FINISH

SELECT OPERATE

Press the MENU button when finished

EXIT

When you set the clock manually, choose MANUAL by

pressing the or arrows.

√

π†

√®

π†

√®

π†

√®

To move to the hours

To set the hours

To move to minutes

To set the minutes

To TIME ZONE

To select your time zone:

SET CLOCK

(Atlantic, Eastern, Central, Mountain, Pacific,

Alaska or Hawaii)

MODE

MANUAL

--: ----

π†

√®

π†

√®

π†

√®

π†

√®

To DATE/YEAR

To set the month

To day

To set the day

To year

TIME

TIME ZONE

DATE/YEAR

D.S.T.

ATLANTIC

JAN/01/05

PRESS TO START CLOCK

To set the year

SELECT OPERATE

EXIT

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

Press OK to start clock

THANK YOU !!

Press the MENU button when finished

Notes:

• D.S.T. can be used when it is set to ON in the SET CLOCK menu.

• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts

your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on

the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in

October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an

alarm to wake up, to help you remember important programs, or as a decoy when you’re not

home.

Press the MENU button

ON/OFF TIMER

7:00 PM

10:00 PM

ON TIME

π†

√®

To ON/OFF TIMER

OFF TIME

CHANNEL

ON VOLUME

MODE

To operate (begins with ON TIME)

CURRENT

EVERYDAY

To set the hour (AM/PM) you want the TV to

turn on

ON/OFF TIMER

†

√®

†

To move to minutes

To set the minutes

PRESS TO FINISH

SELECT OPERATE

EXIT

To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the

OFF TIME the same way as ON TIME

†

√®

†

To accept OFF TIME and move to CHANNEL

To select channel

To ON VOLUME

√®

†

To set the volume level

To move to MODE

√®

Choose ONCE or EVERYDAY

†

To ON/OFF TIMER

√®

Choose YES to accept the timer setting, choose NO if you don’t wish to accept

Press the OK button to finish

Press the MENU button to exit the menu

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Multi Screen Function

Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).

Note: After you press any multiscreen button, if you press the menu button, only the picture

adjust screen will appear.

Twin

Activate the split-screen option by pressing Twin on

V-1

the remote control. The channel (or input) you were

watching before pressing Twin will appear on the left,

the new channel will appear on the right. The sound

will continue to come from the main screen channel

(or input). To turn split-screen off and return to

normal television viewing, press TWIN again or press

the BACK button.

MAIN SCREEN

PICTURE

SPLIT SCREEN

PICTURE

Notes:

• If the signal that you are watching is coming from the HDMI input, you cannot enter the

SWAP or INDEX mode.

• Main Screen and Split Screen will not display the same channel or input at the same time.

• You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.

• Split screen will not display digital channels.

• Split-screen functions will not work with locked channels or channels blocked by V-Chip

ratings limits. A grey screen will display instead.

• With split screen, the picture from the component terminal and DIGITAL-IN terminal will

not be displayed.

• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of

480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal.

• After you press the Select button, and select SPLIT SCREEN when you press the

OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will

be automatically selected about 8 seconds later.

• Aspect does not work in Twin mode.

• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.

• When the cable card is inserted into the TV, the combination of analog broadcasting and

digital broadcasting will not appear in the TWIN mode.

• When it is PC output, Main and Split screen will not be displayed.

• When you are in PC mode, TWIN, INDEX or FREEZE can not be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one

to watch.

Notes:

• Only RF input signal will be displayed.

• You can watch the channel added in channel summary. See page 37.

Freeze

Pressing the FREEZE button causes the screen to change to the split-screen display with the still

picture displayed on the right. In order to return to the normal display, press the FREEZE button

once again.

Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this

function will cancel out.

Swap

You can exchange the channel (or input) displayed in the split screen window for the main

screen image by pressing the SWAP button.

Note:

• It will only work in TWIN mode.

Select

With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you

press SELECT button, the channel number on the top will be highlighted. Each press of SELECT

will shift the channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Power

Turns the TV on or off.

Press the POWER button

Note:

• When you press the power button on the TV, and you are tuned to a digital channel or i.Link,

"NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm

up.

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For

example, to move to channel 12:

0 (Zero)

1 (One)

2 (Two)

Tune

Lets you decide the input channel and select it. After you press the number buttons on the

remote, press the TUNE button. For example, to move to channel 12:

1 (One)

2 (Two)

Press the TUNE button

Input

Selects the signal input source for the television: VIDEO-1, 2, 3, DIGITAL-IN or i.LINK for

video devices like VCRs, DVD players or camcorders.

Press the INPUT button

By every press of the INPUT button, you can change the input mode.

Notes:

• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL

+/– button.

• You can also access by pressing the INPUT button on the side of the TV instead of the remote

control.

• i.LINK can be selected only when you have an i.LINK device connected.

• If you have a PC connected to the TV, select VIDEO-3.

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you

watch is set to the standard color temperature, so that what you see is as true to what the film

to video editors intended it to be.

Press the THEATERPRO button

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Return +/TV

The RETURN+/TV button has three functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

TV - Returns to the TV mode.

Press the RETURN+/TV and hold for three seconds

RETURN CHANNEL

PROGRAMMED!

The channel currently active has been programmed as your return+ channel. Now scan

through the channels using the CHANNEL+/– buttons.

Press the RETURN+/TV

You will return to your programmed channel.

• To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel

return+.

Sound

By pressing the SOUND button, you can change the A.H.S.+ (Advanced Hyper Surround plus)

mode, BBE, SMART SOUND and HYPER BASS on or off.

A.H.S.+ - Adds a more spacious surround sound. Music gives basic effect and movie for more

effect.

BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility

and musical realism.

SMART SOUND - Decreases high sound levels, giving a regulated sound level.

HYPER BASS - Increases bass levels, giving a richer, deeper bass.

Press the SOUND button

SOUND EFFECT

A.H.S.+

MOVIE MUSIC OFF

ON OFF

π†

To select A.H.S.+, BBE, SMART SOUND or

HYPER BASS

BBE

SMART SOUND

HYPER BASS

ON OFF

√®

To choose the setting

OPERATE

EXIT

SELECT

Press the MENU when finished

Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under

USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of

BBE Sound, Inc.

Note: Smart Sound may become an unnatural effect, depending on the signal source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Muting

The MUTING button instantly turns the volume down completely when you press it. Press

MUTING and the volume level will instantly go to zero. To restore the volume to its previous

level, press MUTING again.

Video Status

The VIDEO STATUS button gives you a choice of four TV picture display settings, including a

display of your own preferences.

Standard - Resets the picture display to the factory settings.

VIDEO STATUS

Dynamic - Gives a vivid picture with better contrast when

STANDARD

DYNAMIC

THEATER

GAME

viewing in a brightly lit room.

Theater - Gives a rich, film-like look to video when viewing in

a dimly lit room.

Game - Used for when you are playing video games

connected to your TV.

Press the VIDEO STATUS button

By every press of the VIDEO STATUS button, you change the mode.

Note:

• You can also change the mode by pressing the π† buttons.

• You can also access the FRONT CONTROL PANEL screen by using the MENU button on

the side of the TV instead of the remote control. It appears between INITIAL SETUP and

PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO

STATUS by pressing MENU

+/- buttons ( OPERATE

†

on the side panel and choose a mode by using the CHANNEL

√

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program

originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges

of these programs, press NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct

conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the

television rate of 30 frames-per-second.

Press the NATURAL CINEMA button

NATURAL CINEMA

AUTO

Notes: The natural cinema mode is automatically set to

“AUTO” in the following cases:

OFF

• Turning on or off

• Changing the channel or input mode

• Using multi-screen functions

• If you are in PC mode, Natural Cinema can not be used

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals

of 15 minutes, for a total time of up to 180 minutes.

Press the SLEEP button

0 15 30 45 60 75 90 105 120 135 150 165 180

Sleep Timer Message

60 seconds before the automatic shutoff, this message will appear:

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND

You then have 60 seconds to press the SLEEP button to

delay the shut off for another 15 minutes.

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a

choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the ML/MTS button

MTS

By every press of the ML/MTS button, you change

the mode

ON AIR

STEREO

ON AIR

SAP

MONO

Notes:

• When you are receiving a digital broadcast, if there are other languages, you can change the

language by pressing the ML/MTS button.

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described

on page 62.

• ML/MTS will not work when you are using the Digital-In.

• You can also change the mode by pressing the π† buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Display

The display screen shows the current status of timers, inputs and XDS ID.

Press the DISPLAY button

The screen to the right shows the following

information:

05 KLVX PBS

JAZZ FESTIVAL

• The current channel or AV input (Channel 05)

NOW

12:20 PM

OFF

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The Sleep

Timer is off)

SLEEP TIMER

ON/OFF TIMER

EVERYDAY

7:00 PM

ON TIME

• On/off timer status (Set to turn on everyday at

OFF TIME

10:00 PM

7:00 PM, off at 10:00 PM)

• Each Press of the DISPLAY button changes the

display mode:

Display

Time

Channel

Off

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing MENU.

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

CLOSED CAPTION

Notes:

OFF

SMART CAPTION

• SMART CAPTION will appear when you press the MUTING button,

only on channels where the broadcast contains closed captioning.

• When you select ON, it will be the mode selected in the Closed

Caption Menu.

• See page 47 when you set the caption/text mode.

• You can also change the mode by pressing the π† buttons.

• If you are in PC mode, C.C. can not be used.

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to receive.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Favorite

The Favorite button allows you to select your favorite channels easily. First, you must register

the channels that you like. See how to register below.

Press the FAVORITE button

FAVORITE

The favorite channel list will appear.

π†

To select the channel you want to watch

101

102

D103

CBS

FOX

PBS2

Press the OK button

It will change to the channel you have selected.

D107

HBO

ABC

Press the channel number you want to register

The channel program will change.

Press the FAVORITE button for three seconds

The channel will be registered in the favorite channel list.

Notes:

• Both analog and digital channels can be registered. The digital channels have a "D" in front

of the channel number.

• The maximum number of channels you can register is 24.

• If you have registered the maximum number of channels, and try to register more channels,

the oldest channel you registered will be deleted.

• Sub channels can not be registered.

• The newest channel you registered will appear at the top of the list.

• Regarding digital channels, see pages 74 - 79.

Delete the favorite channel

Press the FAVORITE button

The favorite channel list will appear.

π†

√®

To select the channel you want to delete

To enter

Press the OK button

The channel was deleted.

Press the FAVORITE button when finished

Note:

• Before pressing the FAVORITE button when you are finished, press the √® button again, and

you can return to the deleted channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Aspect

This feature will help you adjust the picture you are watching to give you the best possible

picture quality.

Aspect Ratios

PANORAMA - With this ratio a normal

4:3 aspect picture is stretched to fit the

dimensions of the 16:9 aspect screen.

REGULAR - The regular ratio is used

when you want to watch a 4:3 broadcast

or recorded program without modifying the

original picture to fit the dimensions of your

16:9 screen. The 4:3 picture will fill the

screen from top to bottom, while black bars

will appear to fill up the remaining space

along the picture’s sides. The 4:3 picture

will be centered within the boundaries of the

16:9 screen.

CINEMA - This ratio “zooms in” on the

center part of a 4:3 aspect picture, blowing

it up to fill the 16:9 screen.

SLIM - This aspect mode shrinks the

screen of 16:9 to 4:3. There are some

programming that is already stretched by

mistake at broadcasting companies, so

this mode corrects it. Black side bars will

appear.

FULL - This is the ratio to use when

watching 16:9 High-Definition broadcasts.

PANORAMA ZOOM - This ratio stretches

the High-Definition 16:9 aspect image to

eliminate the black side bars.

FULL NATIVE - This ratio displays 100% of

the ratio. Normally, all aspects except for

Full Native display about 95%.

CINEMA ZOOM - This ratio stretches

the High-Definition 16:9 aspect image to

eliminate the black surrounding bars.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Aspect Ratios (Continued)

Press the ASPECT button

• By pressing the ASPECT button, you can change the size.

When you change the aspect ratios, it is different from their broadcast or recorded program.

NTSC, 480i, 480p

HD (1080i)

ATSC (1080i, 720p)

HD 720p

ATSC (480i, 480p)

ASPECT

PANORAMA

CINEMA

FULL

REGULAR

ASPECT

PANORAMA ZOOM

CINEMA ZOOM

FULL

ASPECT

PANORAMA ZOOM

CINEMA ZOOM

FULL

PANORAMA ZOOM

CINEMA ZOOM

FULL

FULL NATIVE

SLIM

Notes:

• You can also choose the size by pressing the π† buttons.

• When you change the aspect ratio or signal, reset the picture position to center.

• You can also access the FRONT PANEL CONTROL screen by using the MENU button

on the side of the TV instead of the remote control. It appears between INITIAL SETUP

and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose

ASPECT by pressing Menu

+/- buttons ( OPERATE

†

on the side panel and choose a mode by using the CHANNEL

√

• "SLIM" can only be displayed when the signal is ATSC (480i or 480p).

• "FULL NATIVE" can only be displayed when the signal is ATSC or 1080i.

• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to

FULL automatically. If the television receives a 4:3 signal from your HDMI device when you

are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect

mode after the televison changed it to FULL automatically, the televison will change to the

aspect mode you choosed.

• If you are in Media Card Viewer mode, Aspect can not be used.

The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate

the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

TV/CATV Slide Switch

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to

operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.

Note:

• See page 29 for information on programming your remote for cable box operation.

VCR/DVD Slide Switch

You can control a VCR or DVD player with the buttons on the lower part of the remote control.

Move the slide switch to VCR or DVD to operate.

Notes:

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 30.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 31.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions

include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on and

power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 30.

DVD Buttons

You can also use this remote control to operate the basic functions of your DVD player. These

functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,

power on and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 31.

Light

All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide

switch and Light button. Press the LIGHT button to turn the illumination on for 4 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Setup

Use this function when you are receiving a digital broadcast.

Press the MENU button

Digital Setup

Antenna Level

π†

To DIGITAL SETUP

To enter

Digital Sound

PCM

4:3

√®

Aspect Ratio

The onscreen will appear

Cable Card Application

i.LINK Auto Play

Software Update

OFF

Notes:

• Software Update will only appear when the SD Card

is inserted.

BACK

Select

Operate

Back

Exit

• If you are watching an analog channel, you can still

access the digital setup menu at anytime, while you are doing this, the background screen

will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital

setup menu.

Antenna Level

Confirms the present antenna level.

Antenna Level

Press the MENU button

π†

To DIGITAL SETUP

To enter

BACK

√®

Back

Exit

π†

To Antenna Level

To enter

√®

Note:

• If you are watching an analog channel or a signal from your i.Link device, antenna level will

not appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Setup

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is

connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can

enjoy listening in 5.1ch sound when watching digital broadcasts.

Press the MENU button

π†

√®

To DIGITAL SETUP

To enter

π†

To Digital Sound

√®

To select PCM or DOLBY DIGITAL

Press the MENU button when finished

Notes:

• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it

cannot output the sound from the speakers.

• For connecting an amplifier using the optical output, see page 22.

Manufactured under license from Dolby Laboratories. "Dolby", and the

double-D symbol are trademarks of Dolby Laboratories.

Aspect Ratio

You can select the aspect mode for ATSC from 4:3 or 16:9.

Press the MENU button

π†

√®

π†

√®

To DIGITAL SETUP

To enter

To Aspect Ratio

To select 4:3 or 16:9

Press the MENU button when finished

Notes:

• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.

• Make sure the mode you choose is the same as the TV’s aspect ratio when the recorded

program is played back, so that you can obtain a good picture quality, free from any unatural

distortions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Setup

Cable Card Application

Press the MENU button

π†

√®

π†

√®

To DIGITAL SETUP

To enter

To Cable Card Application

To enter

Press the OK button

The application will perform

i.LINK Auto Play

When playing a D-VHS tape, you can set it to the i.LINK input automatically, or manually.

Press the MENU button

π†

√®

π†

To DIGITAL SETUP

To enter

To i.LINK Auto Play

√®

To select ON or OFF

ON: Set to i.LINK input automatically

OFF: Select the input manually

Press the MENU button when finished

Software Update

At first, insert the SD(Multi-media) card into the memory card slot. This function will appear

only when you insert an SD Card.

Press the MENU button

π†

√®

π†

√®

π†

To DIGITAL SETUP

To enter

To Software Update

To enter

Checks the card if it needs an update or not

Press the MENU button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

Digital CH D/A (Digital/Analog)

The D/A button changes the analog and digital channel. Each time you press the D/A button,

you can switch back and forth the analog and digital channels. Digital channels have a "D" in

front of the channel number.

Note:

• If the cable card is inserted into the TV, you cannot use the D/A button. You can select a

digital channel only.

Press the D/A button

To watch digital channels

For example, to move to channel D23:

Press 2 (Two)

Press 3 (Three)

Press the TUNE button

Sub Channel

The main channel sometimes has minor channels (Sub Channels). By using the SUB button,

you can select a sub channel easily.

For example, to move to sub channel 123-45:

Press 1 (One)

Press 2 (Two)

Press 3 (Three)

Press the SUB button

Press 4 (Four)

Press 5 (Five)

Press the TUNE button

Note:

• If there are more than 2 major channels, select the digital channel by using the π† buttons

and then press the OK button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

i.LINK Menu

i.LINK has two menus - Controller and Device.

By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily.

Notes:

• The i.LINK/Timer function will only work when you are receiving digital programming only.

• As for the connection of a D-VHS VCR with the i.LINK cable, see page 23.

• When operating the i.LINK, don't insert or disconnect the i.LINK cable.

Controller

You can operate a D-VHS VCR connected with an i.LINK cable by using this controller.

Notes:

• If the i.LINK is not connected, the Controller OSD will not appear. The OSD of device on

page 76 will appear.

• Some controller operations may differ from your D-VHS VCR operations.

Press the i.LINK MENU button

i.LINK

Controller

D-VHS1

STOP

00:00:00

POWER

Device

√®π† To select the key you want to operate

Press the OK button

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

Device

To operate, select a device.

i.LINK

Controller

Device

Renumber

Page 2/3

D-VHS1

JVC

HM-DH30000U

D-VHS2

JVC

HM-DH40000U

HD-MOVIE 1

GR-HD1

JVC

π†

To select your device connecting with i.LINK

Press the OK button

Notes:

• If you do not select the device, you cannot use the i.LINK timer functions.

• When one device is selected and you select controller, you will move to the Controller

onscreen.

• The devices listed on the device onscreen are only D-VHS and HD-MOVIE that have i.LINK,

which can be recognized on this television. However, you can not record programs to HD-

MOVIE.

• If you disconnect one device, it will be removed from the list. Then, select Renumber to

rearrange the list in the new order.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

Timer

You can set the two timers: Record and view. The timer starts the recording or turns to the

channel you set for it automatically.

Reservation

Press the TIMER button

π†

To New Reservation

Press the OK button

New Reservation

Timer

Sept. 10 (Wed) 4:55PM

Rec

Timer Mode

Channel

Date

35-1

Page 1/3

New Reservation

Sep. 10 (wed)

5:00PM

Start Time

End Time

80-3 PBS1DTV

6:00PM

Sep. 11 (Wed) 6:00PM - 6:30PM Once

335-1 KDVRet

Retailer News Channel

Weekly/Daily

Weekly

i.LINK

Sep. 11 (Wed) 6:00PM - 7:00PM Mon - Fri

Rec to i.LINK

335-1 KDVRet

Regular Schedule

Sep. 18 (Wed) 5:00PM - 6:00PM Daily

Set Timer

35-1 PBPBPB

Sep. 18 (Wed) 8:00PM - 8:30PM Weekly

Cancel

†

√®

†

To Timer Mode

To select Rec or View

To Channel

√®

†

To select the channel you want to set the timer for

To Date

√®

†

To select the date

To Start Time

√®

†

To set the start time

To End Time

√®

†

To set end time

To Weekly/Daily

√®

†

To select Once, Weekly, Daily(Sun.-Sat.), Daily(Mon.-Sat.) or Daily(Mon.-Fri.)

To Rec to i.LINK

√®

To select ON or OFF

†

To Set Timer

Press the OK button

If you set the Rec on timer mode, set recording

title.

is added in front of the program

If you set the View on timer mode, set viewing

title.

Notes:

• In order for the timer setting to work, you must set the clock on your television. See page

58.

• When you want to edit the timer settings, see Timer Edit on page 78.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

Timer Edit

When you want to confirm the timer you set or edited, or delete the timer setting, use this

function.

Timer Edition

Press the TIMER button

π†

To select the timer list you want to edit

Press the OK button

Timer Edit

Timer

Sept. 10 (Wed) 4:55PM

Rec

Timer Mode

Channel

Date

35-1

Page 1/3

New Reservation

Sep. 10 (wed)

5:00PM

Start Time

End Time

80-3 PBS1DTV

6:00PM

Sep. 11 (Wed) 6:00PM - 6:30PM Once

335-1 KDVRet

Retailer News Channel

Weekly/Daily

Weekly

i.LINK

Sep. 11 (Wed) 6:00PM - 7:00PM Mon - Fri

Rec to i.LINK

335-1 KDVRet

Regular Schedule

Sep. 18 (Wed) 5:00PM - 6:00PM Daily

Set Timer

35-1 PBPBPB

Sep. 18 (Wed) 8:00PM - 8:30PM Weekly

Cancel

Delete

√®π† To change the setting you want to edit

†

To Set Timer

Press the OK button

Timer Deletion

Press the TIMER button

π†

To select the timer list you want to delete

Press the OK button

To Delete

Press the OK button

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Button Functions

Cancel the timer recording

When you record a digital program now, you can cancel the recording.

Press the TIMER button

Timer

Sep. 10 (Wed) 4:55PM

Page 1/1

π†

To select the timer list you want to cancel

the recording

New Reservation

80-3 PBS1DTV

Do you want to terminate current program?

Press the OK button

Sept. 11 (Wed) 6:00PM - 6:30PM Once

335-1 KDVRet Retailer News Channel

Sept. 11 (Wed) 6:00PM - 7:00PM Mon - Fri

i.LINK

The message "Do you want to

terminate current program ?" will

appear.

√®

To select

YES: Cancel the recording

NO: Continue the recording

Press the OK button

Guide

You can view the program from the GUIDE.

Notes:

• The GUIDE function will only work when you are receiving digital programming only.

• The GUIDE will not show the correct time and date if you have not performed the set clock

function on your television. See page 58.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

Readable Media Card

This TV can read the following media cards:

SD Card, MMC (Multi Media Card), Memory Stick, xD-Picture Card, CF Card (CompactFlash

Card), Removable microdrive Hard Disk for JVC digital media camera "Everio" (a type of CF

Card)

• Read the cautions on the different types of media cards

• Do not remove a media card if it is being used by the TV. A malfunction may cause the card

not to operate properly. JVC shall not provide any compensation for any lost content.

• SM Card (Smart Media Card) is not supported.

• CF Card and removable microdrive Hard Disk for JVC "Everio" camera is a type of CF Card

compliant with CF+ Type II.

Supported Card Media

The following media are supported in this unit.

(As of September 2005)

Microdrive

compact hard disks

Hitachi

2GB, 4GB

* Hard disks with 1GB or smaller

capacity are not supported.

SD Memory Cards

Panasonic

LEXAR

128MB, 256MB, 512MB, 1GB

128MB

SanDisk

LEXAR

32MB, 64MB, 128MB, 256MB

512MB, 1GB

CompactFlash Cards

xD-Picture Cards

OLYMPUS

Fujifilm

256MB

32MB, 64MB, 128MB

64MB, 128MB

Memory Sticks

SONY

* Memory Stick PRO cards are not

supported.

Notes:

• Operation is not guaranteed for other card media. Usage of other card media can result in the

loss of data already recorded on the card.

• Playback of MPEG-2 video on CompactFlash cards requires a high-speed type card.

• Conversion adapters for card media are not supported.

• The unit may have trouble detecting certain cards. In this case, leave the card inserted, and

turn the power off and then on again.

• Recognition of the card can take signiﬁcantly more time if the card contains a large number of

ﬁles.

* The above supported card media have been conﬁrmed to work with this TV. However, they

are not guaranteed to work with your cards.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

How to insert Media Card

Before you insert a media card into the card slot, open the door on the left side panel and

make sure of the slot type and the direction to insert the card as illustrated. To access, gently

push the "PUSH-OPEN" on the door to open it. Once you have inserted the media card, the

message "PLEASE CLOSE THE DOOR TO OPERATE" will appear on the screen. Then,

close the door. To remove the media card, press the card into the slot again after opening the

door.

Metal Terminal

Ridge

*Removable Microdrive Hard Disk

does not have a ridge.

or MMC

Memory Stick

xD-Picture

Note:

• If you do not close the door, it will not operate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

How to operate Media Card Viewer

Press the MENU button

SELECT CARD, AND PRESS OK

SD Card

π†

√®

π†

To MEDIA CARD VIEWER

To enter

COMPACT FLASH

To select SD Card or COMPACT FLASH

card

If you only have one media card inserted in

the card slot, this menu will not appear.

√®

To enter

The following PHOTO, VIDEO or FILE will appear

SELECT ONE, AND PRESS OK

PHOTO

VIDEO

FILE

√®

To select PHOTO, VIDEO or FILE (Continue to page 83 or 84)

Notes:

• The above screen will change depending on the type of card you insert.

• The sound from the media card can not be changed.

• Onscreen language is linked to LANGUAGE in the Initial Setup Menu.

• When the media card viewer function is used, the menu is not used.

• The following message appears on the TV screen in the following cases:

- When you are inserting a media card or when the door is open, "PLEASE CLOSE THE

DOOR TO OPERATE".

- When no media card is inserted "NO MEDIA DETECTED"

- When no files are found on the media card "NO FILE FOUND"

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

PHOTO

√®

Select PHOTO

Press the OK button

The right nine images appear.

C F

π†√® To select an image that you like

Press the OK button

The slide show starts.

Notes:

• To stop the slide show, press the BACK button.

• To pause the slide show, press the OK button.

To play again, press the OK button.

• In thumbnail view, the time to display the

images varies depending on the number of ﬁles

recorded on the card.

Page

0001/

0003

Illustration when a CF card is being

used

Rotation

When you press the OK while you are viewing the slide show in PHOTO mode, the image is

paused temporarily. Then press π† while the image is paused, and you can rotate the image.

Note:

• Although the image has changed because it is rotated, it will not be saved to the media card.

VIDEO

√®

Select VIDEO

Press the OK button

The right nine images appear.

C F

π†√® To select an image that you like

Press the OK button

The video show starts.

Page

0001/

0003

Notes:

• To stop the video show, press the BACK button.

• The volume can not be changed when these nine

images appear.

• In the playback of MPEG4 images, verification has

been made for basic playback only.

Illustration when a CF card is being

used

• In thumbnail view, the time to display the images varies depending on the number of ﬁles

recorded on the card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

File playback note for PHOTO and VIDEO

• Some recorded ﬁles can result in errors or may not be played back correctly. Sometimes,

JPEG, MPEG2, and MPEG4 ﬁles downloaded from the Internet or other sources cannot

be played back correctly. Images also may not be played back correctly depending on the

camera that was used for recording.

• Noise may appear when images change in the slideshow.

• The display order in the slideshow follows alphabetical order of the ﬁle names.

• If video, still images, and other ﬁles with different extensions are stored in the same folder,

start of video playback may be choppy or other playback problems may occur. Storage of

different ﬁle types in separate folders is recommended.

• When video or still images are recorded by Everio, only video recorded in a compact hard

disk can be played back. Video recorded in the SD card cannot be played back.

• You may not be able to replay audio on some ﬁles created or edited with "CyberLink DVD

Solution" software (provided with some JVC digital cameras). This will depend upon the

way in which the ﬁles were created or edited and is not a malfunction of the TV.

FILE

√®

Select FILE

Press the OK button

The following screen appears.

F I L E L I B R A R Y

File Size

Date

91KBytes

01/01/2005

...

DVC00024

DVC00025

DVC00026

DVC00027

DVC00028

DVC00029

DVC00030

Illustration of CF file library

FOLDER 100JVCGR

CF 0002/0007

π†

Everytime a file is selected in the left frame, the image will appear in the right frame.

Notes:

• To be released from the FILE, press the BACK button.

• The date displayed in the FILE view is the date the images were recorded. The date may not

be displayed for some cameras.

• Only the ﬁrst eight characters of the ﬁle name are displayed. Double-byte characters are not

supported.

• The display order of thumbnails follows alphabetical order of the folder names and then

alphabetical order of the ﬁle names in the folders.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

Operation Note

Operation of the CH+ and CH- keys is different for slideshows started from the PHOTO/VIDEO

icon and for slideshows started from the FILE icon.

1) When you select VIDEO icon and play the video, press the following buttons:

CH+ : Fast-Forward

CH- : Rewinding

VOL+ : Up volume

VOL- : Down volume

OK : Pause or Play (Each pressing will switch back and forth)

2) When you select FILE icon and play the PHOTO or VIDEO:

While playing PHOTO – You cannot use CH+/CH- and VOL+/-

While playing VIDEO – You cannot use CH+/-. You can change volume by using

VOL+/-.

Note: While using the card viewer, do not unplug the television from the AC outlet. It will cause

the card to break.

Download from Www.Somanuals.com. All Manuals Search And Download.

Media Card Viewer

Specifications

1) Supported card media

CF type

Microdrive

Hard Disk

Memory

Card

Memory

Stick

xD-Picture

Card

Card Media

CompactFlash

√

MPEG2-PS

MPEG4

JPEG

√

2) Supported ﬁle systems

(1) FAT16

(2) FAT32

(3) VFAT

3) Supported data management standards

(1) DCF 2.0 (still image)

(2) SD-Picture (still image)

(3) SD-Video Entertainment Video Proﬁle (video) compliant

(Video: MPEG2-PS MP/ML, Audio: Dolby Digital)

(4) SD-Video Mobile Video Proﬁle (video) compliant

(Video: MPEG4 Simple proﬁle/ Level 1 restricted to Level 3, Audio: G.726)

4) Supported image ﬁle standards and extensions

(1) Exif 2.21 (Extensions: JPG, jpg, JPEG, jpeg)

(2) JFIF (Extensions: JPG, jpg)

(3) SD-Video MPEG2-PS (Extensions: MOD, mod)

(4) SD-Video ASF MPEG4 (Extensions: ASF, asf)

5) Supported image size and rate

(1) Still images

160×120 to 2560×1920 pixels (The size is automatically

adjusted when displayed.)

(2) Video

1) MPEG2-PS

720×480 pixels (525/60 systems)

352×240 pixels (525/60 systems)

2) MPEG4

352×288 pixels/30 frames

240×176 pixels/15 frames

160×120 pixels/5 frames

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Information

Weak Signal

This OSD warning appears when the digital channel that you have selected is too weak to

receive or no signal is being detected for that channel.

Weak Signal

No Program

If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"

appears on the television screen. It appears when that channel is not receiving a signal and you

have the Noise Muting function OFF and you have a single screen. It moves automatically every

two seconds to prevent the screen from burn-in.

Note:

• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off

functions that you set, are still active.

Invalid Signal

If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It

appears when the input is PC and it is a single screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cable Card Information

Cable card offers information when a cable card is inserted into the CABLE CARD slot on the

back of the television.

Notes:

• Please contact your local cable company regarding detailed information.

• When the cable card is inserted into the cable card slot, if you turned the power off, the fan will

continue to rotate because the program information is being renewed. This is normal.

Cable Card Connection

ard

Notes for inserting Cable Card:

• Firmware Upgrade of Cable Card can be executed. While executing the Firmware Upgrade,

please do not turn off the TV, according to the message on the TV screen.

• When you are watching a program, and if a weather or government emergency occurs, the

following may occur automatically regardless of what channel you were watching: the channel

may change, the screen will disappear or important text will appear on the screen. The

information is transmitted from EAS (Emergency Alert System). EAS information may also

appear when you do not have a cable card inserted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Refer to the table below to check the condition. If you think that there is a problem, contact the

JVC Service Center where you purchased the television.

PROBLEMS

CHECK

There is no power

• See if the power cord became unplugged.

• Check for a blown fuse or circuit breaker or a power outage.

There is no picture

or sound

• The antenna could be disconnected.

• The input mode could be set improperly. See page 62.

• The tuner (Auto Tuner Setup) could be set improperly. See page 36.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not • Check to see that the batteries are still working and properly installed.

operating properly or • Make sure the remote has a clear sight path to the TV.

at all

• Check that the TV/CATV switch is in the proper position.

• You may be too far from the TV. You must be within 23 feet (7 meters).

You cannot select a

certain channel

• Make sure the channels have been programmed. See "Channel Summary", page 37.

• Check to see if the channel is locked. See "Channel Summary - Lock" page 38.

The power turns off

by itself

• Make sure the set did not become unplugged.

• Perhaps the On/Off Timer is set. See page 59.

• Check to see if the Sleep Timer was set. See page 65.

It does not operate

correctly

• This television is operated by a microprocessor. It is possible that external noise or

interference is causing the problem. If the television does not function correctly, remove the

electrical plug from the wall outlet and wait a while before inserting it into the wall outlet

again and operating the television.

The clock is wrong

• The power was interrupted and the clock was not reset. See page 58.

The color quality

is poor

• Tint and Color may be improperly adjusted. See page 54.

• The Video Status mode may be turned to the wrong setting. See page 64.

There are lines

across the picture

• There could be interference from another electrical appliance, such as a computer,

another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

operating nearby. Move the antenna away from the appliance or change to a coaxial

cable connection which is less prone to interference.

The picture is spotted

There are double

pictures (ghosts)

• A building or passing airplane can reflect the original signal and produce a second,

slightly delayed one. Adjust your antenna position.

Picture is snowy

(image noise)

• Your antenna may be damaged, disconnected or turned. Check the antenna

connection. If the antenna is damaged, replace it.

Screen is 80% black

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 47.

• Make sure the MTS settings are correct. See page 65.

Stereo or bilingual

programs can't be

heard

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

PROBLEMS

CHECK

Static electricity

• It is normal to feel static electricity if you brush or touch the screen.

You hear occasional

crackling sounds

• It is normal for the TV to make crackling sounds when first turned on or off. Unless

the sound or picture become abnormal, this is fine.

It does not operate

correctly

• Press the CHANNEL- and VOLUME- buttons on the side panel of the TV simultaneously

for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug

the power cord and plug it back in.

The following are not malfunctions.

•

The television may make a creaking sound if the temperature of the room or the

temperature of the inside of the television changes. If there is no problem with the screen or

sound, then there is no need to worry.

•

Although the picture may be temporarily disturbed and noise may be seen on the screen if

the power is turned on immediately after it has been turned off, this is not a malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Model

LT-40FH96

Type

LCD Flat Television

Reception Format

NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable

VHF 2 to 13, UHF 14 to 69 at ATSC,

CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable

Reception Range

VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper

and Ultra bands (191 channel frequency synthesizer system) at Analog

•

Reception of channel A-5 ("95" of the TV set's on-screen cable channel

numbers) is not recommended for your TV set.

Power Source

AC 120V, 60 Hz

255W

Power Consumption

40 inch / 101.6 cm

measured diagonally,

16:9 ratio

Screen Size

Audio Output

Speakers

10W + 10W

6.6 cm round x 4

Antenna Terminal

(VHF/UHF,

ATSC/DIGITAL

CABLE IN)

75 ohms (VHF/UHF)(F-type connector)

Video: 1 Vp-p, 75 ohms

Audio: 500 mVrms (-4dBs) high impedance

External Input Jacks

Component Input

Jack

Y: 1Vp-p positive, 75 ohms (negative sync provided)

Pb/Pr: 0.7 Vp-p 75 ohms

Y: 1Vp-p positive, 75 ohms (negative sync provided)

C: 0.286 Vp-p (burst signal), 75 ohms

S-Video Input Jacks

Monitor/Recording

Output

Video: 1Vp-p, 75ohms

Y: 1Vp-p positive, 75 ohms (negative sync provided)

C: 0.286 Vp-p (burst signal), 75 ohms

Audio: 250mVrms (-10dBs)

Fs-18dB Low Impedance

Optical Output

Digital Audio

Digital Out (optical) x 1

TS IN/OUT (4-pin, S400) x 2

i.LINK In/Out Jack

Digital–In

IEEE1394 compliant DTCP digital copy protection compatible

HDMI jack x 2

Note: The Digital–In terminal is not compatible with picture signals of a

personal computer

SD Card, MMC, CompactFlash,

Removable microdrive Hard Disk

for JVC digital media camera "Everio"

(a type of CF card), Memory Stick,

xD-Picture Card

Readable Cards

Dimensions (inch/cm)

W X H X D

39 3/8 x 29 x 12 3/4

(with stand)

100 x 73.4 x 32.4

(with stand)

39 3/8 x 26 1/2 x 4 5/8

(without stand)

100 x 67.1 x 11.7

(without stand)

70.4 / 32 (with stand)

55 / 25 (without stand)

Weight (lbs / kg)

Accessories

Refer to "unpacking your TV", page 9

Specifications subject to change without notice.

• The open source software is embedded in this product. For more information, please go to:

http://software.jvc.com/opensource/lnx/DP/04_AtscCC/download.html

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

JVC CANADA, INC.

21 Finchdene Square

Scarborough, Ontario

Canada, M1X 1A7

Wayne, New Jersey, 07470

Download from Www.Somanuals.com. All Manuals Search And Download.

InFocus Projector IN3924 User Manual
Intel Personal Computer SROMBSASMR AXXROMBSASMR User Manual
Jenn Air Automobile Parts AR140 User Manual
JVC CRT Television 0801 Ki NV JET User Manual
JVC Home Theater Screen TM 1600SU User Manual
Kenmore Vacuum Cleaner 11620512 User Manual
Keys Fitness Treadmill 4500T User Manual
KitchenAid Blender KFP715BW2 User Manual
KitchenAid Range 4317266 User Manual
Kodak Camera Accessories K6300 User Manual