Contents
Safety precautions
Preparation
1 Insert the batteries into the remote control
2 Connecting the aerial and VCR
3 Connecting other devices
4 Connect the power cord to the AC outlet
2
2
2
3
4
4
5
6
7
7
7
7
7
9
8
8
8
9
9
COLOUR TELEVISION
...
INSTRUCTIONS
Thank you for buying this J VC
colour television.
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
..................
..........................
...
...............................................
5 Initial setting
Basic operation
Remote control buttons and functions
.....................................
ECO SENSOR button
.................................
PICTURE MODE button
COLOUR SYSTEM button
SOUND SYSTEM button
.............................
...............................
.............................................
.............................................
.............................................
AV-21L91
AV-25L91
AV-29L91
button
MUTING button
DISPLAY button
.........................................
..........................................
OFF TIMER button
RETURN + button
................................
CHANNEL SCAN button
Using the TV’s m enus
10
10
11
11
11
11
12
12
12
13
13
13
14
14
15
16
16
17
18
19
............................................
Basic operation
...........................................................
INPUT
...............................................
PICTURE TILT
...............................................................
VNR
........................................
..........................................
COMPRESS (16:9)
AUTO SHUTOFF
.................................................
..................................................
................................................
CHILD LOCK
BLUE BACK
VIDEO-2 SET
....................................
.....................................
Picture Adjustm ents
Sound Adjustm ents
..................................................
AI VOLUME
.......................................
AUTO CH PRESET
..................................
MANUAL CH PRESET
..............................................................
SKIP
..................................................
LANGUAGE
TV buttons and parts
Using the buttons on the TV
Troubleshooting
Specifications
Back cover
LCT1064-001A-H
0801-Ki-NV-JET
© 2001 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
P r e p a r a t i o n
2 Co n n e c t in g t h e a e ria l a n d VCR
• Read the manuals provided with the devices. Depending on the device, the connection method
may be different from the diagrams. Also the device settings may need to change depending on
the connection method.
• Turn off all the devices including the TV.
• Connecting cables are not supplied.
• When connecting monaural audio to the TV, use the L/ MONO jack.
• If you connect the VCR to the TV only with an aerial cable, you should preset the video channel
from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on
page 15 and preset it manually.
Connecting the aerial
VHF/ UHF outdoor aerial
(1)
Matching
aerial
adapter
(supplied)
COMPONENT
VIDEO-1
(
)
VIDEO-2
INPUT
OUTPUT
(2)
(3)
INPUT
V
Y
V
L
/V
L
CB
CR
L
/MONO
/ MONO
R
R
R
Connecting the aerial and VCR
VHF/ UHF outdoor aerial
COMPONENT
VIDEO-1
INPUT
(
)
VIDEO-2
INPUT
OUTPUT
V
Y
V
L
/V
3
L
CB
CR
L
/MONO
/ MONO
R
R
R
2
To video
output
To audio
output
To RF
output
1
VCR
To aerial input
3
Download from Www.Somanuals.com. All Manuals Search And Download.
P r e p a r a t i o n
3 Co n n e c t in g o t h e r d e vic e s
If you are not connecting any other devices, skip step 3 and perform step 4.
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
• The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV.
You can dub them onto the VCR connected to the OUTPUT terminal.
(The OUTPUT terminal cannot output component video signals. Also it cannot output any
signals when the TV is turned off.)
• Connect components outputting a component signal (Y/ CB/ CR signal), such as a DVD player, to
the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 13.)
• The following illustrations are for the AV-29L91. Your TV’s front and rear pannels may not look
exactly like the illustrations.
Front
Cam corder or TV gam e
V
L/ MONO
R
IN (VIDEO-3)
Headphones
Rear
COMPONENT
VIDEO-1
INPUT
(
)
VIDEO-2
INPUT
OUTPUT
VCR (for playing)
DVD player
(com posite signals)
V
Y
V
L
/V
V
L
C
B
L
/ MONO
/ MONO
VCR (for recording)
R
C
R
R
R
R
DVD player
(com ponent video signals)
4 Co n n e c t t h e p o w e r c o rd t o t h e AC o u t le t
4
Download from Www.Somanuals.com. All Manuals Search And Download.
P r e p a r a t i o n
5 In it ia l s e t t in g
When the TV is first turned on, it enters the initial setting mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the initial
settings.
1 Press the Main pow er button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the TV
au tom atically sw itch es to th e
POWER lam p Main power button
language setting mode.
POWER
DISPLAY
DISPLAY
button
MENU t
buttons
MENU
MENU
AUTO CH PRESET
MANUAL CH PRESET
3
MENU m
buttons
LANGUAGE
ENGLISH
CHANNEL
VOLUME
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• The JVC logo does not appear if your
TV has been turned on once before. In
this case, use the LANGUAGE and AUTO
CH PRESET functions to perform the ini-
tial settings. For details, see pages 14
and 16.
2 Press the MENU M buttons to select language.
3 Press the MENU T buttons to select “AUTO CH PRESET”
4 Press the MENU M buttons to start the AUTO CH PRESET function.
“>>> ON SEARCH” is displayed on the screen.
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO CH PRESET function operation is completed.
To stop the AUTO CH PRESET function, press the MENU m buttons.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET
function. For details, see page 15.
Th is c o m p le t e s in it ia l s e t t in g .
No w yo u ’re re a d y t o e n jo y yo u r J VC TV.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c o p e r a t i o n
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
POWER
DISPLAY
• You can also turn on your TV by pressing
any of the following buttons;
MENU
- the CHANNEL m button
- the Number buttons
- the TV/ VIDEO button
CHANNEL
SYSTEM
VOLUME
2 Select a channel.
COLOUR
SOUND
MUTING
■ Press the CHANNEL m button.
• Up/ down selection cannot be selected for
channels to which the SKIP has been set
to “YES”. See page 16.
TV/VIDEO
I/II
1
2
5
8
0
3
6
9
4
7
■ Press the Num ber buttons to enter
the channel num ber.
PICTURE MODE
CHANNEL SCAN RETURN
-/--
• If you want to enter a two-digit number,
press the -/ -- button to select the two digit
mode “--”, then enter the channel num-
ber.
ECO SENSOR
OFF TIMER
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
RM-C353 REMOTE CONTROL UNIT
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 7.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 7.
View ing Im ages from an External
Device:
Press the TV/ VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
R e m o t e c o n t r o l b u t t o n s a n d f u n c t i o n s
ECO S ENS OR b u t t o n
COLOUR S YS TEM b u t t o n
You can adjust this TV so that the screen
automatically adjusts to the optimum
contrast according to the brightness of your
room. This function reduces eye strain and
the power consumption of this TV.
If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
Press this button to select the colour
system .
Press this button to select the desired
m ode.
SECAM
NTSC3.58
AUTO
PAL
NTSC4.43
DIGITAL ECO SENSOR DISPLAY:
The ECO SENSOR function switches on. In
this mode, the clover mark indicating the
brightness of your room is displayed for
several seconds each time the brightness
changes. The number of clover marks
displayed on screen increases as your room
becomes darker.
AUTO:
Automatic colour system selection.
• For the colour systems in each country or
region, see the table“Broadcasting systems” on
page 20.
• If the picture is not normal in the AUTO mode,
change the AUTO mode to another colour
system.
DIGITAL ECO SENSOR:
The ECO SENSOR function switches on.
However, in this mode, the clover mark will
not be displayed.
S OUND S YS TEM b u t t o n
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
DIGITAL ECO SENSOR OFF:
The ECO SENSOR function switches off.
Press this button to select the sound
system .
P ICTURE MODE b u t t o n
You can select one of three picture
adjustment settings as you like.
B/G
I
D/K
M
Press this button to select a m ode.
• For the sound systems in each country or re-
gion, see the table “Broadcasting systems” on
page 20.
BRIGHT:
Heightens contrast and sharpness.
• You cannot select any sound system when in a
VIDEO mode.
STANDARD:
Standardizes picture adjustments.
SOFT:
Softens contrast and sharpness.
• Pressing this button returns all the picture set-
tings in “MENU 4” to their default settings.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
R e m o t e c o n t r o l b u t t o n s a n d f u n c t i o n s
b u t t o n
MUTING b u t t o n
You can select a sound setting for stereo
broadcast program m es an d bilin gu al
programmes.
You can turn the sound off instantly.
Press this button.
To turn the sound on, press this button
again.
Pre s s t h is b u t t o n t o s e le ct a s o u n d
setting.
: Stereo sound
DIS P LAY b u t t o n
: Bilingual I (sub I) sound
: Bilingual II (sub II) sound
: Monaural sound
You can continuously display the current
channel number or VIDEO mode on the
screen.
MONO : Cancels the multi-sound function,
Press this button.
and the sound becomes monaural.
To turn the display off, press this button
again.
• If you have poor reception of a stereo broad-
cast, you can change from stereo sound (
)
to monaural sound ( ) so that you can hear
the broadcast more clearly and easily.
• When selecting a VIDEO mode with no signal,
indication of the VIDEO mode becomes fixed
on the screen.
• If the multi-sound function cannot work nor-
mally due to poor signal quality, noise may be
included in the sound, or the sound may change
many times. If this happens, change the sound
setting to MONO mode to cancel the multi-sound
function.
OFF TIMER b u t t o n
You can set the TV to automatically turn off
after a set time.
Press this button to select the period of
tim e.
• You can set the period of time to a maximum of
120 minutes in 10 minute increments.
• 1 minute before the OFF TIMER function turns
off the TV, “GOOD NIGHT!” appears.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function, press
this button to set the period of time to 0.
• The OFF TIMER function will not turn off the
TV’s main power.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
R e m o t e c o n t r o l b u t t o n s a n d f u n c t i o n s
RETURN + b u t t o n
CHANNEL S CAN b u t t o n
You can set a channel you frequently view
to the Return Channel and you can view
that channel at any time with one-touch.
You can quickly view all TV channels
programmes that you can view on your TV,
and search for the programme you want to
view.
To set the channel to the Return
Channel:
1 Press this button to start scanning
TV channels.
1 Select the channel you w ant to set
to the Return Channel.
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for which
the SKIP function is set to “YES” are not
displayed.
2 Press this button and hold until the
m essage “RETURN PLUS PRO-
GRAMMED!” appears.
2 When you find the program m e you
w ant to view, press this button
again to stop scanning.
• When you turn off the TV, the Return Chan-
nel setting is cancelled.
To view the Return Channel:
Press this button.
• You can view two channels (current channel
and Return Channel) alternately by pressing this
button.
To cancel the Return Channel setting:
Press this button and hold until the
message“RETURN PLUS CANCELLED!”
appears.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
This TV has a number of functions you can operate using the menus. To use all your TV’s
functions fully, you need to understand how to use the menus.
4 Press the MENU M buttons to
change function settings.
POWER
Example:
DISPLAY
DISPLAY
button
Changes the AUTO
SHUTOFF setting.
MENU t
buttons
MENU
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
MENU m
buttons
OFF
OFF
ON
VIDEO-2 SET COMPONENT
VIDEO-2 SET COMPONENT
⇔
CHANNEL
VOLUME
SELECT BY
EXIT BY
DISPLAY
SELECT BY
EXIT BY
DISPLAY
OPERATE BY -+
OPERATE BY -+
• With some functions, the operation method
may differ.
5 Press the DISPLAY button to turn
the display off.
■ Ba s ic o p e ra t io n
1 Press the MENU T buttons.
• To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 18.
One of the 5 menus is displayed.
MENU number
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
The icon
on the
left indicates the
currently selected
function.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Repeatedly press the MENU T
buttons to display a desired
m enu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first line,
pressing the r button displays the preced-
ing menu.
3 Repeatedly press the MENU T
buttons to select a desired
function.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
INP UT
VNR
You can view images from VCRs or other
devices connected to your TV.
You can reduce picture noise.
1 Press MENU T to display the
“MENU 1” m enu, then select
“VNR”.
1 Press MENU T to display the
“MENU 1” m enu, then select
“INPUT”.
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
MENU
1
INPUT
VNR
TV
ON
ON
00
COMPRESS(16:9)
PICTURE TILT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the VNR function, select “OFF”.
2 Press MENU M to select “VIDEO 1”,
“VIDEO 2” or “VIDEO 3”.
TV mode changes to VIDEO mode.
COMP RES S (1 6 :9 )
This function converts a normal picture (4:3
aspect ratio) into a wide picture (16:9 aspect
ratio).
P ICTURE TILT
< AV-29L91 only>
Use for pictures with a 16:9 aspect ratio that
have been squeezed into a normal picture
(4:3 aspect ratio), to restore their original
dimensions.
There are cases where the Earth’s magnetic
force may make the picture tilt. If this
happens, you can correct the picture tilt.
1 Press MENU T to display the
“MENU 1” m enu, then select
“PICTURE TILT”.
1 Press MENU T to display the
“MENU 1” m enu, then select
“COMPRESS (16:9)”.
MENU
1
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Continue pressing MENU M until
2 Press MENU M to select “ON”.
the picture becom es level.
To cancel the COMPRESS (16:9) function,
select “OFF”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
AUTO S HUTOFF
BLUE BACK
You can set your TV to turn off if no signals
are received for about 15 minutes or longer
after the end of a broadcast.
You can mute the sound and change the
picture into a blue screen while no signals
are received by the TV, or when the signals
are unstable.
1 Press MENU T to display the
“MENU 2” m enu, then select “AUTO
SHUTOFF”.
1 Press MENU T to display the
“MENU 2” m enu, then select “BLUE
BACK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
VIDEO-2 SET COMPONENT
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
2 Press MENU M to select “ON”.
To cancel the AUTO SHUTOFF function,
select “OFF”.
To cancel the BLUE BACK function, select
“OFF”.
• The AUTO SHUTOFF function does not turn
off the TV’s main power.
• To view a broadcast even when the recep-
tion signal is poor, set the BLUE BACK func-
tion to “OFF”.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
• Even when the BLUE BACK function is set
to “OFF”, the sound may not be audible.
CHILD LOCK
You can disable the front control buttons of
the TV.
When this function is set to “ON”, the TV
can be operated using only the remote
control.
Use this function to prevent children from
operating the TV without parental consent.
1 Press MENU T to display the
“MENU 2” m enu, then select “CHILD
LOCK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the CHILD LOCK function,
select “OFF”.
• The CHILD LOCK function is canceled when
you turn the power off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
VIDEO-2 S ET
P ic t u re Ad ju s t m e n t s
Set the VIDEO-2 SET correctly according to
the video signal input from the external
device connected to the VIDEO-2 terminal.
If this setting is incorrect, images will not
be displayed.
You can adjust the picture as you like.
1 Press MENU T to display the
“MENU 4” m enu.
MENU
4
TINT
COLOUR
BRIGHT
CONT.
SHARP
1 Press MENU T to display the
“MENU 2” m enu, then select
“VIDEO-2 SET”.
SELECT BY
EXIT BY
DISPLAY
OPERATE BY -+
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
2 Press MENU T to select an item
and press MENU M to adjust it.
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
TINT*
- : Reddish
- : Lighter
- : Darker
- : Lower
- : Softer
+
+
+
+
+
: Greenish
: Deeper
: Brighter
: Higher
COLOUR
BRIGHT
CONT.
2 Set the VIDEO-2 SET according to
the video signal input from the
VIDEO-2 term inal.
SHARP
: Sharper
* TINT (tint) is displayed only when viewing
images from NTSC3.58 or NTSC4.43 colour
systems.
If a norm al video signal (com posite
video signal) is input:
Press the MENU m buttons to select
“VIDEO”.
S o u n d Ad ju s t m e n t s
You can adjust the sound as you like.
If a com ponent video signal (Y/ CB/ CR
signals) is input:
Press the MENU m buttons to select
“COMPONENT”.
1 Press MENU T to display the
“MENU 5” m enu.
MENU
5
BASS
TREBLE
BALANCE
AI VOLUME
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU T to select an item
and press MENU M to adjust it.
TREBLE
BASS
BALANCE
- : Weaker
- : Weaker
- : Left
+
+
+
: Stronger
: Stronger
: Right
13
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
AI VOLUME
AUTO CH P RES ET
You can prevent the sudden increase or
decrease of volume that occurs when
changing channels or switching VIDEO
modes.
You can automatically preset all TV channels
that can be received by your TV to channels.
1 Press MENU T to display the
“MENU 3” m enu, then select “AUTO
CH PRESET”.
1 Press MENU T to display the
“MENU 5” m enu, then select
“AI VOLUME”.
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE
ENGLISH
MENU
5
BASS
TREBLE
BALANCE
AI VOLUME
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to start the AUTO
CH PRESET function.
2 Press MENU M to select “ON”.
“>>> ON SEARCH” is displayed on the
To cancel the AI VOLUME function, select
screen.
“OFF”.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is completed.
• The AI VOLUME function may not operate as
expected if the sound input level from a broad-
cast station (or video software) is extremely low.
• The AI VOLUME function for TV mode and
VIDEO mode can be set separately. For example,
you can set it to be off in TV mode and on in
VIDEO mode. If you set the AI VOLUME func-
tion while viewing a TV channel, the setting is
registered as the setting for TV mode. If you set
the AI VOLUME function while viewing images
from a VIDEO terminal, the setting is registered
as the setting for VIDEO mode.
To stop the AUTO CH PRESET:
Press the MENU m button.
• The AUTO CH PRESET function does not preset
a TV channel to the AV channel (channel num-
ber 0).
• If the TV cannot preset the TV channel you want
to view, preset it manually. For details, see
“MANUAL CH PRESET” on page 15.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
If the picture is not clear:
Fine-tune the TV channel.
MANUAL CH P RES ET
You can m an u ally preset desired TV
channels to desired channels.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” m enu, then select
“MANUAL CH PRESET”.
NO
B/G
SELECT BY
PROGRAM BY -+
FINE
PR 1 VL
EXIT BY
BY VOL-+ DISPLAY
MENU
AUTO CH PRESET
MANUAL CH PRESET
3
LANGUAGE
ENGLISH
2
Hold VOLUME m down to fine-tune
the TV channel so that the best im age
is displayed on screen.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
“> ” or “< ” indicates that the TV is fine-
tuning the TV channel.
2 Press MENU M.
The sub-menu is displayed.
If the sound is not clear:
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
1
Press MENU t to select “SOUND
SYSTEM”.
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
• The channel number is displayed as a PR
number. For example, channel 1 will be dis-
played as PR 1. However, the AV channel
will be displayed as AV.
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
3 Press MENU M to select the
2
Press VOLUME m to select the
channel num ber.
appropriate sound system .
• For the sound systems in each country
or region, refer to the table “Broadcasting
systems” on page 20.
4 Press VOLUME M to start search-
ing for the TV channel.
“>>> ” or “<<< ” is displayed on the
screen.
5 Press MENU T to select
“MANUAL”.
When the TV finds a TV channel, the
“>>> ” or “<<< ” display goes out, and
the TV channel is preset to the currently
selected channel number.
6 Repeat steps 3 to 5 if you w ant to
preset another TV channel to a
channel.
• If the TV channel you want to preset is not
displayed, repeat step 4 until the TV finds
the TV channel you want to preset.
• To stop the MANUAL CH PRESET function,
press any button other than the VOLUME
m button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e T V ’s m e n u s
S KIP
LANGUAGE
You can set undesired channels to be
skipped. Channels set to be skipped cannot
be selected by the CHANNEL m buttons
nor the CHANNEL SCAN button.
You can select the language for the on-screen
display.
1 Press MENU T to display the
“MENU 3” m enu, then select
“LANGUAGE”.
• Channels to which TV channels have not been
preset are automatically set to be skipped.
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
1 Press MENU T to display the
“MENU 3” m enu, then select
“MANUAL CH PRESET”.
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
The sub-menu is displayed.
2 Press MENU M to select
language.
3 Press MENU T to select “SKIP”.
The on-screen display indications are in
the selected language.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
SELECT BY
PROGRAM BY -+
PR 1 VL
EXIT BY
YES/NO BY VOL-+ DISPLAY
4 Press MENU M to select the
channel you w ant to skip.
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select “NO”.
6 Repeat steps 4 and 5 if you w ant to
set another channel to skip.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
T V b u t t o n s a n d p a r t s
Front
< AV-29L91>
1
2
3 4 5 6
V
L/ MONO
R
IN (VIDEO-3)
7
8
< AV-21L91 and AV-25L91>
1
2
3
4
5
7
8
1 Headphone jack
2 VIDEO-3 terminal
3 MENU button
5 VOLUME m buttons
6 TV/VIDEO button
7 POWER lamp
4 CHANNEL m buttons
8 Main power button
Rear
COMPONENT
VIDEO-1
(
)
VIDEO-2
INPUT
OUTPUT
INPUT
V
Y
C
V
L
/V
B
1 VIDEO-1 INPUT terminal
2 COMPONENT (VIDEO-2)
INPUT terminal
L
L
/MONO
/ MONO
R
C
R
R
R
3 OUTPUT terminal
4 Aerial socket
1
2
3
4
17
Download from Www.Somanuals.com. All Manuals Search And Download.
U s i n g t h e b u t t o n s o n t h e T V
Ba s ic o p e ra t io n
Op e ra t in g m e n u s
• Check to make sure the CHILD LOCK function
is set to “OFF”. When the CHILD LOCK function
is set to “ON”, the TV cannot be operated using
the front control buttons. For details, see “CHILD
LOCK” on page 12.
You can operate functions in menus using
the front control buttons on the TV.
1 Press MENU y to display a m enu.
2 Press MENU y repeatedly to display
1 Press CHANNEL M to turn the TV
the m enu you w ant to use.
on from standby m ode.
3 Press MENU y to select the desired
2 Press CHANNEL M to select a
function or item .
channel.
4 Press MENU M or VOLUME M to
3 Press VOLUME M to adjust the
carry out the desired operation.
volum e.
For details, see the description for each
function.
4 To turn your TV off, press the Main
pow er button to turn off the TV’s
m ain pow er.
5 Press VOLUME M to turn the m enu
display off.
To change the TV m ode to the VIDEO
m ode:
To turn the sub-m enu display off:
• Press the TV/ VIDEO button if the TV has
one. See page 6.
• If the TV has no TV/ VIDEO button,
select the VIDEO mode with the INPUT
function in “MENU 1”.
1
Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
SELECT BY
PROGRAM BY -+
EXIT
PR 1 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME m to turn the display
off.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Tr o u b l e s h o o t i n g
If there is no picture or the TV does not operate normally, make sure the problem isn’t due to
the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Press the COLOUR SYSTEM button to select an-
other colour system. (see page 7.)
• Adjust the picture settings. (see page 13.)
• Is a component signal output device, such as a
DVD player, connected correctly? (see page 4.)
The screen turns blue
• Is the BLUE BACK function on? (see page 12.)
• Is the “VIDEO-2 SET” function setting correct?
(see page 13.)
• If noise (snow) totally blocks out the picture,
check the following.
Rem ote control inoperable
• Replace the batteries. (see page 2.)
- Have the TV and aerial been connected properly?
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
Buttons on front of the TV do not w ork
• Switch the CHILD LOCK function off. (see page
12.)
• If the TV or aerial suffer interference from other
equipment, stripes or noise may appear in the
picture. Move any equipment which can cause
interference away from the TV.
TV does not respond im m ediately
• If the TV or aerial suffer interference from
signals reflecting from mountains or buildings,
double-pictures (ghosting) will occur. Change
the aerial’s direction or replace it with an aerial
with better directionality.
• Press the main power button on the TV to turn
off the main power. Press the main power but-
ton again to turn on the TV. If the TV returns to
a normal state, operation is normal.
• When a white and bright still image (such as a
white dress) is displayed on the screen, the
white part may look as if it is coloured. When
the image disappears from the screen, the
unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate? (see
page 8.)
• Is the AUTO SHUTOFF function on? (see page
12.)
The picture is tilted
<
AV-29L91 only >
Poor sound
• A picture may be tilted due to the influence of
the earth’s magnetism. In this case, use the PIC-
TURE TILT function to adjust the tilt. (see page
11.)
• Press the SOUND SYSTEM button to select an-
other sound system. (see page 7.)
• Adjust the sound settings. (see page 13.)
• If there is noise during mono sound output,
press the
button to select “MONO”.
(see page 8.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
S p e c i f i c a t i o n s
TV RF system s
B, G, I, D, K, K1, M
Colour system s
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Channel and frequencies
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in m id band, super band and hyper band.
External input / output
VIDEO-1:
VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input,
COMPONENT VIDEO (Y/CB/CR) input
VIDEO-3:
OUTPUT:
Headphone jack:
VIDEO input, AUDIO L/R input
VIDEO output , AUDIO L/R output
stereo m ini jack (3.5 m m diam eter)
Sound-m ultiplex system s
A2 or NICAM (B/G, I, DK)
Design and specifications subject to change w ithout notice.
Bro a d c a s t in g s ys t e m s
System
Colour
Area
Country or Region
Sound
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand,
India, etc.
PAL
B/ G
Asia,
Middle
East
China, Vietnam, etc.
PAL
PAL
D/ K
I
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
SECAM
NTSC
SECAM
PAL
B/ G
M
D/ K
D/ K
B/ G
I
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
PAL
PAL
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
PAL
B/ G
I
PAL
Africa
Nigeria, etc.
PAL
B/ G
B/ G
Egypt, Morocco, etc.
SECAM
Download from Www.Somanuals.com. All Manuals Search And Download.
|