JVC Digital Camera TK C1431 User Manual

COLOUR VIDEO CAMERA  
TK-C1430  
INSTRUCTIONS  
TK-C1431  
CAMERA  
VIDEO  
COLOR  
LOOK  
BF  
DIGITAL  
® is a registered trademark owned by Victor Company of Japan, Limited.  
® is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.  
© 2005 Victor Company of Japan, Limited.  
Printed in Thailand  
LWT0276-001A-H  
LWT0276-001A-H  
E-
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing this product.  
Safety Precautions  
(These instructions are for TK-C1430E and TK-C1431EG)  
Before beginning to operate this unit, please read the instruction manual  
carefully in order to make sure that the best possible performance is obtained.  
Due to design modifications, data given in this  
instruction book are subject to possible change  
without prior notice.  
CONTENTS  
WARNING:  
INTRODUCTION  
TO REDUCETHE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT  
EXPOSETHIS APPLIANCETO RAIN  
OR MOISTURE.  
Features ...............................................................................................................................6  
Operating Precautions .........................................................................................................7  
Controls, Connectors and Indicators ...................................................................................8  
CONNECTION/INSTALLATION  
RM-P2580 System.............................................................................................................12  
Procedures ........................................................................................................................14  
Mounting the lens ..............................................................................................................15  
Installing the ferrite core ....................................................................................................16  
Connections on the back ...................................................................................................16  
Mounting the camera .........................................................................................................18  
Lens adjustment ................................................................................................................20  
Back focus adjustment ......................................................................................................21  
Auto white balance control adjustment .............................................................................22  
AVERTISSEMENT:  
POUR EVITER LES RISQUES  
D’INCENDIE OU D’ELECTRO-  
CUTION, NE PAS EXPOSER  
LAPPAREIL A LHUMIDITE OU A LA  
PLUIE.  
MENU SETTING  
Setting the menu ...............................................................................................................23  
The flow of menu screen ...................................................................................................24  
SYNC ADJUST Screen .....................................................................................................26  
ALC SETTINGS Screen ....................................................................................................26  
VIDEO ADJUST Screen ....................................................................................................31  
MODE SELECT Screen ....................................................................................................32  
MOTION DETECT Screen.................................................................................................34  
COMMUNICATION Screen ...............................................................................................35  
MAINTENANCE Screen ....................................................................................................35  
FACTORY SETTINGS Screen ..........................................................................................35  
BLC EDITTING Screen .....................................................................................................36  
Manual Adjustment of White Balance ...............................................................................37  
CAMERA TITLE Setting ....................................................................................................38  
Setting the MOTION DETECT Function ...........................................................................39  
Output of Black-White/Colour switching signal .................................................................40  
Control by Black-White/Colour switching signal from the outside ....................................41  
White spot compensation ..................................................................................................42  
OTHERS  
Specifications.....................................................................................................................43  
E-4  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Features  
Operating Precautions  
To save energy, when it is not being used  
turn the system’s power off.  
This camera has been designed for indoor  
use. When you use it outdoors, be sure  
to use a housing or the like.  
Do not install or use the camera in the  
following places.  
• In a place exposed to rain or moisture.  
• In a place with vapor or oil soot, for  
example in a kitchen.  
• When the ambient temperature rises  
above or falls below the acceptable  
range (from –10°C to 50°C).  
• Near a source of radiation, X-rays,  
strong radio waves or magnetism.  
• In a place subject to vibration.  
Observe the following when carrying out  
camera maintenance.  
Turn the power OFF before proceeding  
A DSP (Digital Signal Processor) features  
a Extended Dynamic Range (ExDR) and  
enables to shoot both bright and dark  
locations.  
Before starting an important recording,  
be sure to perform a test recording in  
order to confirm that a normal  
recording is possible.  
to carry out maintenance.  
If it is contaminated seriously, clean the  
contaminated part with a cloth (or a  
tissue) which has been soaked in a  
solution of water and a neutral detergent.  
The unit is to be powered by a DC 12 V  
or an AC 24 V power supply. (TK-C1430E)  
The AC 24V power supply should conform  
to the following: Isolated power supply  
only  
We do not accept liability for the loss of  
a recording in the case of it becoming  
impossible to record due to a problem  
in the video camera, VCR or video tape.  
We do not accept liability for any  
damage to the camera in cases where  
it is dropped because of bad installation  
due to failure to observe the installation  
instructions correctly.Please be careful  
when installing the camera.  
The use of a CCD with a SENSE UP (X32)  
function realized the minimum luminous  
flux density for subject of 0.9 lx (F1.2,  
50%, AGC 20dB) and 0.03 lx (at SENSE  
UP (X32)).Furthermore, we realized 0.03  
lx (F1.2, 50% AGC 20dB) thanks to the  
function of B/W mode.  
TK-C1431EG: Connect the power cable to  
the commercial power supply of 220V –  
240V.  
A motion detector function detects the  
motion inside an image and emits alarm  
signals.  
The motion detector is not a feature  
which prevents theft, fire, etc. Even if  
an accident should occur resulting in  
damage, we do not accept any liability.  
• In a place with excessive dirt.  
Caution for operating the video iris lens.  
If the video iris lens is set to an extremely  
low level, a malfunction – such as the  
hunting phenomenon where the iris opens  
and closes in voluntary – can occur.  
In such a case, first set the “LEVEL”  
potentiometer on the lens to the H position  
(iris open), and then adjust it to an optimum  
level. (page 20)  
The cable stopper on the terminal block  
can come off sometimes. Therefore, be  
sure to take enough time and fix the cable  
securely.  
When a highly bright subject is shot,  
sometimes undulations can be observed  
on the vertical lines of the subject.  
However, this phenomenon is peculiar to  
the unit and is not a sign of malfunction.  
The beat may sometimes appear on the  
screen if gain is raised when the line lock  
is in use, but the phenomenon takes place  
due to the fluctuation of power frequency  
and is not a malfunction.  
You may hear some noise when the  
screen is switched between the colour  
and the black and white mode, because  
the optical filter moves. Also, black vertical  
bands will appear on the screen.  
If this camera and the cables connected  
to this camera are used where there are  
strong electromagnetic waves or where  
there is magnetism present, for example  
near a radio or TV transmitter, power  
transformer or an electric motor, the picture  
may produce noise and the colours may  
be affected.  
This camera incorporates an AGC circuit.  
As a result, when it is used under low light  
conditions, the camera sensitivity is  
automatically boosted and the picture may  
look uneven. However, this is not a  
malfunction.  
While the AGC is activated, if transceiver  
which causes strong electromagnetic  
wave is at close distance, picture might  
suffer from beat.  
So please use the camera more than three  
meters from such transceivers.  
When this camera is used in the ATW  
mode, the recorded colours may be slightly  
different from the actual colours due to the  
operational principles of the auto-tracking  
white balance circuit. However, this is not  
a malfunction.  
If a high-intensity object (such as a lamp)  
is shot, the image on the screen may have  
vertical lines (smear) or blur (blooming)  
at its periphery.This is a characteristic of  
the CCD, and is not a defect.  
The equipped Y/C terminals and RS-  
422A/RS-485 terminals allow intended  
compatibility with diversified systems.  
Day/Night surveillance  
When the light is low, the camera pictures  
can be switched automatically to black  
and white pictures.  
Electronic zoom  
The 10x electronic zoom allows  
monitoring in far greater detail.  
Characters and symbols used in this instruction manual.  
CAUTION : Cautionary notes concerning operation of the unit.  
MEMO  
: Reference such as restrictions of features, etc.  
: Reference page or item.  
Set the Iris Selector switch to VIDEO to  
use the manual lens.  
E-6  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Controls, Connectors and Indicators  
SET  
AWC  
CAMERA  
SETUP  
ON  
LL  
EXT TERM-OFF  
INT/GL  
MENU  
SIMPLEX  
DUPLEX  
RX TERM-OFF  
ON  
NOT USED  
IRIS  
VIDEO  
DC  
Lens mount  
To attach the lens.  
This is applicable to both C-mount lenses  
and CS-mount lenses.  
Camera-mounting bracket  
Cover  
[SET/AWC] Set. Auto White Control  
Button  
SET: Press this button to display a sub-  
menu.  
1
2
4
8
9
12  
The bracket has been attached on the  
bottom of the camera before shipment. It  
can also be attached on the top  
according to the circumstance.  
To re-attach the bracket use the threaded  
holes at the top, with the camera  
The cover slides open when push to the  
left.  
[VIDEO/DC] Iris Selector Switch  
This should be set according to the type  
of lens if an automatic iris control lens is  
used.  
VIDEO: In case of lens with EE amp built-  
in.  
(Page 23)  
Back focus adjustment ring  
Adjusting the back focus during lens  
installation.  
AWC: If this button is kept pressed for  
more than 1 second, a one-push-  
auto-white-balance function works  
and sets the white balance. Once  
it is set, even if colour temperature  
changes, white balance does not  
change. It is also possible to make  
fine adjustments on the set white  
balance.  
mounting bracket fixing screws  
.
7
When readjustment is required, loosen  
the locking screw  
counterclockwise and turn the back focus  
adjustment ring  
by turning it  
Camera-mounting screw  
hole (1/4 inch)  
Use this hole when mounting  
the camera onto a fixer, pan/  
tilt unit, and the like. (Use a  
screw shorter than 7 mm.)  
3
5
DC:  
In case of lens without EE amp  
built-in.  
.
2
After the adjustment, tighten the locking  
screw again.  
MAX.  
7mm  
(DC: At time of factory shipment)  
3
[IRIS] Iris Terminal  
This is connected to an automatic iris  
control lens.  
10  
11  
[BF LOCK] Back focus locking screw  
This serves to fix the back focus-adjusting  
ring.  
3
(Page 22)  
Rotation-preventive hole  
6
7
Make use of this rotation-preventive hole  
to prevent any fall when mounting the  
camera. Always make sure that the  
camera is securely mounted.  
(Page 15)  
[MENU] Menu Button  
When pressed, a menu screen is brought  
up.  
Camera mounting bracket fixing screws  
(×2: M2.6 × 6 mm)  
(Page 23)  
Be sure to use a 6 mm long screw.  
E-8  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Controls, Connectors and Indicators (Continued)  
[
,
,
,
] Up-and-down, left-and-  
SIMPLEX:  
13  
14  
(
)
)
right Button  
This switch sets to SIMPLEX when the  
transmission between the camera and a  
remote control unit is in a simplex system  
(one-way).  
These buttons select items on the menu  
screen and change a set value.  
(Page 23)  
+
1
-
2
(DUPLEX: At time of factory shipment)  
[EXT.TERM-ON/OFF] Terminal On/Off  
Switch of External Synchronization  
Signal  
TX+ TX-RX+ RX- AUX GND  
TX+ TX-RX+ RX- AUX GND  
[RX.TERM-ON/OFF] RX SignalTerminal  
ON/OFF Switch  
17  
A
B
C
D
A
B
C
D
This is a terminating ON/OFF switch for  
the external synchronization input signal.  
When this is switched ON, termination is  
executed via a 75 1 resistor.  
This sets whether or not the signal  
Y/C OUT  
Y/C OUT  
between RX + and RX – on the back  
20  
SYNC IN  
POWER  
VIDEO OUT  
SYNC IN  
POWER  
VIDEO OUT  
should be terminated at the value of  
1101 resistance.  
ON: Terminated.  
SEE INST-  
SEE INST-  
RUCTION  
MANUAL  
RUCTION  
MANUAL  
ON: terminates at 751.  
OFF: does not terminate at 751.  
(ON: At time of factory shipment)  
OFF: Not terminated.  
¤
¤
If the system including the camera is the  
M.DROP (Multi-drop, RS-485) system,  
only the last camera mounted along the  
control signal cable is set to “ON” and  
the other cameras are set to “OFF”. In  
case of the M.DROP system, it becomes  
necessary to set the Machine ID. (Page  
35)  
If the system including the camera is the  
P TO P (Point to Point, RS-422A) system,  
set this switch of all the cameras to “ON”.  
The item STYLE on the COMMUNICA-  
TION screen sets M.DROP or P TO P  
(Page 35)  
TK-C1430E  
TK-C1431EG  
Signal  
[INT/GL, LL] Selector Switch for  
Synchronizing System  
This switch sets the synchronizing system  
for the camera.  
INT/GL:  
This is set for internal synchronization  
(INT) or external synchronization (GL).  
LL (Line Lock):  
The camera’s vertical synchronization is  
locked to the AC power line frequency.  
When switching between multiple  
cameras using a switcher, selecting this  
mode and adjusting the vertical phase  
can reduce the monitor sync disturbances  
occur that when the camera image is  
switched. (This cannot be used in regions  
where the power frequency is 60 Hz)  
(INT/GL: At time of factory shipment)  
15  
[DC 12V, AC 24V] Power input terminals  
(TK-C1430E)  
To input DC 12V or AC 24V power.  
19  
20  
Pin No.  
1
2
3
4
GND  
GND  
Luminance (Y)  
Chrominance (C)  
[TX+A, TX-B, RX+C, RX-D] Control  
signal connection terminals  
Terminals for inputting signals with  
electrical characteristics conforming to  
the EIA/TIA RS-422A or RS-485 standard.  
[VIDEO OUT] Video signal output  
connector  
This BNC connector outputs a composite  
video signal. Connect this to the video input  
connector of a video monitor, switcher, etc.  
23  
RX.TERM switch  
17  
[AUX, GND] Auxiliary Input/OutputTerminals  
If there is any change in the area set on the  
MOTION DETECT screen, these terminals  
outputthecorrespondingsignals.(Page34)  
These terminals also output the B&W/  
COLOUR signal. (Page 30)  
[Open-collector low signal. Maximum  
voltage 30V, current 30mA.]  
When carrying out B&W/COLOUR switching  
using the control signal, the signals are input  
through these terminals. (Page 30)  
[B&W: make; COLOUR: break]  
21  
[POWER] Power indicator lamp  
This lamp lights when power is supplied  
to the camera.  
24  
25  
(ON: At time of factory shipment)  
NOT USED  
This cannot be used. Do not switch.  
18  
[SYNC IN] Sync signal input connector  
This BNC connector accepts the input of  
an external sync signal such as a composite  
video (VBS) or black burst (BB) signal.  
When a sync signal is input into this  
connector, the camera operation is  
automatically synchronized with the  
external sync signal.  
[DUPLEX, SIMPLEX] Selector Switch  
for Transmission System  
If the setting is changed, be absolutely  
sure to switch on the power again.  
DUPLEX:  
This switch sets to DUPLEX when the  
transmission between the camera and a  
remote control unit is in a duplex system  
(two-way).  
16  
[Y/C OUT] Y/C output connector  
This 4-pin connector outputs the luminance  
and chrominance signal.  
22  
To terminate this connector at 751, turn  
ON the EXT.TERM switch  
.
14  
Power cable (TK-C1431EG)  
Connect to the commercial AC (220V –  
240V) outlet.  
• Pin configuration ofY/C OUT connector  
26  
4
3
2
1
E-10  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION/INSTALLATION  
RM-P2580 System  
System with up to 8 cameras  
Camera  
Connecting the control signal cable  
(Use a twisted-pair cable for connection. Page 17.)  
Camera 1  
TK-C1430  
Control signal cable  
control signal  
connection terminals  
Video signal cable  
RM-P2580  
Camera 1  
Connect:  
AC24V  
TX+  
TX  
A
B
C
D
A RX  
B RX  
C TX  
D TX  
+
Power  
cable  
MACHINE ID:1  
(Menu screen)  
RX TERM: OFF  
(switch)  
or  
Camera TX+ to RM-P2580 RX+  
Camera TX– to RM-P2580 RX–  
Camera RX+ to RM-P2580 TX+  
Camera RX– to RM-P2580 TX–  
The A B C D marks indicated on both the  
camera terminals and the RM-P2580 termi-  
nals facilitate correct connections. Connect  
the terminals with identical marks.  
DC12V  
Camera  
TK-C1430  
RX+  
+
RX  
Camera 2  
AC24V  
or  
DC12V  
MACHINE ID:2  
(Menu screen)  
RX TERM: OFF  
(switch)  
Camera 2  
control signal  
connection terminals  
Camera  
TK-C1430  
TX+  
TX  
RX+  
RX  
A
B
C
D
MONITOR  
MONITOR  
Camera 8  
AC24V  
or  
DC12V  
Time lapse VCR  
SR-L910  
REC STOP/EJECT REC  
OPERATE  
CAM SW  
OUT  
MACHINE ID:8  
(Menu screen)  
RX TERM: ON  
(switch)  
CHECK  
VIDEO CATE RDER  
PAUSE/  
STILL  
O
P
E
.
L
O
C
K
REVERSE  
REW  
PLAY  
FF  
COUNT/  
CLOCK  
SHIFT/TRACKING  
SET/V.LOCK  
RESET  
/CANCEL  
MENU  
TIME  
MODE  
TIMER  
REC  
AL/PL  
RESET  
VIDEO IN  
Setting the switches (Page 10)  
CAMERA  
TO  
Select the synchronization method of the  
camera image.  
SW COM  
CAMERA  
TO CAMERA  
DATA  
I
/
O
UNIT  
R
X
+
R
X
-
T
X
+
T
X
-
COM  
1
2
3
4
5
6
7
8
COM 9/1 10/2 11/3 12/4 13/5 14/6 15/7 16/8 COM AUTO ALARM COMCASMWERACOM  
SERIAL-1  
SERIAL-2  
POWER  
Set the switch on all cameras to LL (Line Lock)  
and match with the V. PHASE.  
(Page 26.)  
OFF  
VIDEO INPUT  
1
1
2
3
3
4
4
5
6
6
7
7
8
8
MONITOR  
OUTPUT 2  
Remote Control Unit  
RM-P2580  
MONITOR MONITOR  
OUTPUT OUTPUT  
AC INPUT  
1
2
1
2
3
4
5
6
7
8
2
5
ON  
VIDEO OUTPUT  
EXT TERM-OFF  
INT/GL  
ON  
LL  
Set this switch to the DUPLEX  
* If the setting is changed, be absolutely sure to  
switch on the power again.  
MONITOR  
OUTPUT 1  
SET  
AWC  
DUPLEX  
SIMPLEX  
ON  
CAMERA  
SETUP  
EXT TERM-OFF  
INT/GL  
ON  
MENU  
LL  
RX TERM-OFF  
DUPLEX  
SIMPLEX  
ON  
RX TERM-OFF  
This is the connected example of the TK-C1430E.  
NOT USED  
NOT USED  
IRIS  
When controlling with any system except the RM-P2580, execute proper settings using  
switches and menu screens according to the systems used. (Page 14)  
VIDEO  
DC  
Set this switch to ON (signal termination ON)  
only on the camera placed at the end of the  
control signal cable.  
Set to OFF on all other cameras.  
MEMO  
• When operating a system using the RM-P2580, several cameras (up to 16) can be con-  
nected and used on one control signal cable. Consequently, an incorrect switch setting on  
just a single camera will cause the entire system to work incorrectly.  
Setting on the MENU screen (Page 35)  
* If the setting is changed, escape from the menu screen once, and definitely switch on the power again.  
Set to M.DROP  
COMMUN I CAT I ON  
Set to M.DROP when the RM-P2580 is used  
• Confirm switch settings on the screen as follows.  
q Confirm that the image from the camera to be checked  
is displayed on the monitor.  
MONITOR screen  
(example showing camera ID as “05”)  
S TYLE  
MACH I NE I D  
M. DROP  
1
as a remote control unit. When controlling  
from another machine, make sure that it  
matches the communication system used.  
w Turn OFF and then ON the AC power to the camera to  
be checked.  
e The camera begins the initial operation and characters  
similar to those shown in the illustration on the right  
appear on the monitor screen.  
MACHINE ID setting switches  
Set this item to match the RM-P2580 VIDEO  
INPUT terminal number for each camera.  
r Confirm that “DUPLEX” and “ID-□□” are displayed and  
that the ID number is the correct number (the number  
should be the same as the number of the VIDEO IN-  
PUT terminal to which the camera is connected on the  
rear panel of the RM-P2580).  
When connecting  
P RO T OCO L : D U P L E X I D - 0 5  
Turn OFF the power supply to all equipment to be used before making connections.  
Carefully read the Instructions for each piece of equipment to be used before making  
connections.  
For the appropriate connection cables and the length of these, carefully read “Connections  
on the back” on page 16.  
The control signal cable cannot be used for loop connection.  
The number shown in the  
□□ part of ID-□□  
should be correct.  
“DUPLEX” should  
be displayed.  
t If wrong, set the camera ID again.  
E-12  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION/INSTALLATION  
Procedures  
Mounting the lens  
Execute connection/installation according to the procedures described below.  
Turn OFF the power supply to all equipment to be used before making carefully.  
Mount the lens according to the procedures described below.  
1. Before mounting a lens, check whether  
it is a C-mount or CS-mount lens.  
To change the mounting method, loosen  
the back-focus locking screw (M 2.6)  
using a Phillips head screwdriver, turn  
the back-focus adjusting ring with your  
fingers or the screwdriver and change  
the mounting method.  
4.Setting the switches  
(Page 13)  
6.Back focus adjustment  
(Page 21)  
SET  
CAMERA  
SETUP  
EXT TERM-OFF  
INT/GL  
ON  
As regards the dimension (b) of the area  
to which the lens is to be installed as  
illustrated on the left diagram, use the  
one with less value than what’s shown  
in the table below.  
MENU  
LL  
K
C
DUPLEX  
SIMPLEX  
ON  
O
L
F
B
RX TERM-OFF  
IOT USED  
(b)  
VIDEO  
DC  
F
For both the C-mount and CS-mount,  
never use whatever exceeds the dimen-  
sion (b), as such will not allow normal  
installation and damage the inner part  
of the camera, resulting in a malfunc-  
tion.  
5.Lens adjustment  
7.Auto white balance  
control adjustment  
(Page 22)  
(Page 20)  
(c)  
1. Mounting the lens  
(Page 15)  
3.Mounting the camera  
(Page 18)  
3.  
VIDEO  
DC  
Lens  
Flange back (c) Dimension (b)  
2.  
C mount lens 17.526mm  
CS mount lens 12.5mm  
5.5mm or less  
5.5mm or less  
To controlling systems  
such as RM-P2580  
IRIS  
VIDEO  
DC  
The F mark indicates a focal point.  
4.  
DC 12V/AC 24V  
power supply  
1
3
4
2. Mount the lens on the camera by turning  
the lens clockwise. Adjust its position.  
2.Connections  
(Page 16)  
3. When using an auto-iris lens with an EE  
amplifier, turn the switch to the “VIDEO”  
side.When no EE amplifier is equipped,  
turn the switch to the “DC” side.  
2
To alarm terminals  
such as switches  
+
1
-
2
CAUTION:  
TX+ TX-RX+ RX- AUX GND  
A
B
C
D
4. If the lens has an auto-iris mechanism,  
connect the lens cable after checking the  
pin arrangement.  
Always attach the fer-  
rite core (supplied) to  
the lens cable.  
3
Genlock sync  
1
Y/C OUT  
signal generator  
SYNC IN  
POWER  
VIDEO OUT  
4
SEE INST-  
If the lens cable has a different type of  
plug, use the 4-P plug supplied.  
RUCTION  
MANUAL  
2
(Page 16)  
Monitor  
Attached 4 pin plugs  
Lens  
DC IRIS  
VIDEO IRIS  
This is the connected example of the TK-C1430E.  
TK-C1431EG Page 17  
1
3
Pin No.  
(does not contain EE amplifier)  
(contain EE amplifier)  
1
2
3
4
Brake  
9V [max 50mA]  
NC  
VIDEO  
GND  
Brake +  
+
Drive  
Drive  
2 4  
E-14  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION/INSTALLATION  
Installing the ferrite core  
To retain electromagnetic compatibility, use the ferrite cores provided when connecting to  
the lens.  
MEMO  
• If thin cables are used (i.e. with a high resistance), a significant voltage drop will occur when  
the unit is at its maximum power consumption. Either use a thick cable to restrict the voltage  
drop at the camera side to below 10%, or place the power supply near to the camera. If  
voltage drop occurs during operation, the performance will be unstable.  
• Attach the cable conductors so that they do not come into contact with the drop prevention  
wires.  
Video-iris lens  
(or galvanometnc-iris lens)  
Wind once  
• Do not allow input from both a DC 12 V and AC 24 V power supply at the same time.  
• When using a DC 12 V power supply, ensure that the polarities of the cable are correct.  
• The AC 24 V power supply should conform to the following: Isolated power supply only  
VIDEO  
DC  
Ferrite core  
Wire clamp  
TK-C1431EG (AC220V – 240V)  
Notes:  
• Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferrite  
core with the wire clamp provided.)  
• If the LENS cable is short, please connect the cable to the camera without winding the  
cable around the ferrite core.  
Power cable connect to the commercial  
AC220V – 240V outlet  
CAUTION:  
When you use this camera, the socket-out-  
let shall be installed near equipment so  
as to disconnect easily.  
Connections on the back  
Y/C OUT  
Connect the DC 12 V or the AC 24 V power  
supply to the DC 12V/AC 24V terminals. To  
prevent connection errors or a cable  
disconnection, we recommend the use of lug  
plates for the connections.  
Power supply  
TK-C1430E (DC 12 V or AC 24V)  
SYNC IN  
POWER  
VIDEO OUT  
SEE INST-  
RUCTION  
MANUAL  
The following table shows the connection  
distances and connection cables provided  
that 2-conductor VVF cables (vinyl-insulated  
vinyl sheath cables) are used.  
Control signal cables  
Genlock connection  
+
1
-
2
These cables should be connected only when  
it is required to control the camera using the  
RS-442A or RS-485 signals.The use of 0.65  
4-conductor twisted pair cables is recom-  
mended. With these cables, the maximum ex-  
tension distance is 1,200 m.  
With some systems, when the external sync  
signal is a composite video or black burst sig-  
nal genlocking by applying an external sync  
input requires the horizontal phase (H  
PHASE) and colour phase (SC COARSE) to  
be adjusted.  
TX+ TX-RX+ RX- AUX GND  
A
B
C
D
Maximum extension  
(reference)  
100 m 260 m 410 m 500 m  
Y/C OUT  
Conductor  
diameter  
1.0mm 1.6mm 2.0mm 2.6mm  
and more and more and more and more  
SYNC IN  
POWER  
VIDEO OUT  
SEE INST-  
MEMO  
RUCTION  
MANUAL  
Connect to the other  
side in pairs like this.  
A
B
TX+  
TX  
• Genlocking is not possible with a signal con-  
taining too much jitter, such as a VCR or  
videodisc playback signal.  
-
C
D
RX+  
RX  
Connect to the other  
side in pairs like this.  
-
• For details, consult a JVC authorized dealer.  
E-16  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION/INSTALLATION  
Mounting the camera  
When mounting the camera on a fixer, pan/  
tilt, etc., use the camera mounting screw hole  
located on the camera-mounting bracket.  
Installation of camera  
q
Mounting from the bottom  
Camera mounting  
screw hole  
This camera is originally designed to be  
mounted from the bottom, as shown q.  
The hole is standard photographic pan-  
head screw size (1/4-20 UNC). Example  
the Fixing unit or Pan/Tilt unit.  
Camera-mounting bracket  
CAUTION:  
IRIS  
VIDEO  
DC  
Use the screw with a  
length shorter than 7mm  
from a camera-mounting  
Mounting from the top  
face.  
MAX.  
7mm  
Remove the CAMERA MOUNTING  
BRACKET from the bottom of the camera  
by removing two fixing screws as shown  
w. Attach the CAMERA MOUNTING  
BRACKET to the top, then mount the  
camera on the Fixing Unit as shown e.  
Make sure that two original screws are  
used when mounting the CAMERA  
MOUNTING BRACKET. Be sure to use a  
6 mm long locking screw for the camera-  
mounting bracket.  
Furthermore, make use of the rotation  
prevention hole to prevent the camera from  
falling and securely mount the camera.  
Special precautions must be taken for  
mounting the camera on a wall or a ceiling.  
We are not liable for any damage caused by  
improper installation.  
Rotation prevention hole  
w
(This camera is used indoor and under  
similar conditions.)  
Fall Prevention  
Exercise maximum caution when  
installing the unit to the wall or ceiling. You  
should not engage in the installation work  
yourself. Ask a professional to do the job,  
since the fall of the unit can result in  
injuries and accidents.  
Camera-  
mounting bracket  
-
2
+
1
Y
YU(TPE)  
D
T
T
A
A
    V
(ETYPE)  
IOSLA  
        O
Y/C OUT  
-
T
S
IN  
E
E
S
CTION  
RU  
IDEO OU
L
UA  
N
A
M
SYNC IN  
When installing the unit on a fixer, Pan/  
Tilt unit, etc., make sure to install it firmly  
using a rotation-preventing hole provided  
to prevent fall.  
To prevent fall, connect the unit to a  
section with sufficient strength (ceiling  
slab or channel) using a fall prevention  
wire such as a wire chain and the like.  
Use the black screw on the back of the  
unit for installation.  
6mm  
2mm  
M3 x 6mm  
Fixing screws  
e
Pay utmost attention to the length of the  
wire, too.  
Specified screw (M3 × 6 mm)  
Never use any screw longer than the  
specified length as the inside can be  
damaged.  
IRIS  
VIDEO  
DC  
E-18  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION/INSTALLATION  
Lens adjustment  
Back focus adjustment  
Connect the camera according to the connection method, turn it on, display an image on the  
monitor, and check the image.The camera has been factory-adjusted to the best position, but  
it may need to be adjusted according to the object conditions or combination of lenses. If the  
image is unnatural, adjust it as follows: (Also read the instruction manual of the lens.)  
Back focus adjustment  
Be sure to make back-focus adjustments when changing the lens mounting method or using  
a different lens. If required, adjust it as follows:  
To make accurate back focus adjustments, use the electronic shutter and the ND filter,  
and carry out the following adjustments in a state where the lens iris is released. (The ND  
filter acts to reduce the amount of incident light entering the lens evenly over the entire  
wavelength band.)  
LEVEL  
adjustment  
• LEVEL adjustment  
Monitor screen LEVEL turning direction  
• With a fixed-focus lens  
If the focus can not be adjusted correctly by  
rotating the lens focus ring, adjust the back  
focus as follows.  
Too bright  
Too dark  
Counterclockwise (Toward L)  
Clockwise (Toward H)  
Back focus  
adjustment ring  
MEMO  
1. Loosen the back focus locking screw by  
turning it counterclocckwise ( ) with a  
screwdriver.  
• If the sensitivity adjustment LEVEL is  
turned excessively to L, the sensitivity in-  
creases because of the AGC function of  
the camera, and the image looks grainy.  
• If the video iris lens is set to too low a level,  
malfunction such as the hunting phenom-  
enon, in which the iris opens or closes  
unintentionally, may occur.  
2. Shoot a pattern closely.  
Tighten  
3. Turn the lens focus ring to ϱ.  
K
LOC  
ALC adjustment  
(Does not operate.)  
BF  
Loosen  
4. Turn the back focus adjustment ring to  
focus at the best point.  
Back focus locking  
screw (M2.6)  
MEMO  
5. Tighten the back focus locking screw by  
In such a case, first set LEVEL potentiom-  
eter on the lens to the H (iris open) posi-  
tion then adjust it to the optimum level.  
Note that the lens cannot make ALC adjust-  
ments. Make ALC adjustments using the item  
AVERAGE: PEAK on the menu.  
(Page 26)  
turning it clockwise ( ).  
Lens focus ring  
• With a zoom lens  
If the image is out of focus when zooming  
(telephoto wide-angle), adjust the camera as  
follows:  
1. Loosen the back focus locking screw by  
turning it counterclocckwise ( ) with a  
screwdriver.  
MEMO  
2. Shoot a comparatively dark scene with  
• LENS FOCUS ADJUSTMENT MODE  
At the time of focus adjustment, press the  
thin lines.  
3. Set the lens to the maximum telephoto  
button  
at the side of the unit for at least  
position, and adjust the lens focus.  
one second to open the lens iris and to fa-  
cilitate focusing.At this time, “LENS FOCUS  
ADJUSTMENT MODE” will be displayed on  
the monitor screen.  
When the adjustment has been completed,  
press one of the buttons  
4. Set the lens to the maximum wide-angle  
position, and turn the back focus ring to  
adjust the focus.  
(Repeat steps 3. and 4. two or three  
times.)  
to can-  
cel focus adjustment mode.  
5. Tighten the back focus locking screw by  
• Focus setting can differ on the colour and  
on the black and white screen. Make ad-  
justments so that the focus will come to the  
optimum on both screens.  
turning it clockwise ( ).  
E-20  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
Setting the menu  
MENU button  
CONNECTION/INSTALLATION  
Auto white balance control adjustment  
Each light source has its own colour temperature. Therefore, when the main light source  
lighting an object is changed, the white balance should be adjusted again by pressing the  
AWC button.  
4. Use the  
,
button to set the  
cursor (>) to a desired item.  
ALC SET T I NGS  
I R I S LE VEL  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
L OL UX MODE  
SENSE UP  
PR I OR I T Y  
BLC  
B&W/COLOUR MODE ..  
NORMAL  
8 :  
NORMAL  
2 0 dB  
OFF  
OFF  
– – –  
OFF  
AWC button  
SET button  
2
1. Place a white object under the same  
lighting condition as the object to be shot  
and zoom in to fill the screen with white.  
SET  
CAMERA  
SETUP  
EXT TERM-OFF  
INT/GL  
ON  
AWC  
MENU  
LL  
2. When the AWC button is pressed for  
approx. one sec., the white balance is  
adjusted for the object being recorded.  
DUPLEX  
SIMPLEX  
ON  
RX TERM-OFF  
NOT USED  
IRIS  
VIDEO  
DC  
5. Change the set value using the  
3. During the time when the Auto White  
function is operated, "AWC OPERA-  
TION" is displayed (for approx. 0.5 sec.).  
When the appropriate white balance is  
acquired, "AWC OK" is displayed.  
,
button.  
Change of the set value displays a  
change mark ().  
ALC SET T I NGS  
I R I S LE VEL  
-5  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
8 :  
2
NORMAL  
2 0 dB  
OFF  
OFF  
– – –  
4. Error message display  
NG : OBJECT  
L OL UX MODE  
SENSE UP  
PR I OR I T Y  
AWC OPERATION  
AWC  
OK  
1. Press the MENU button.  
Displayed when there is not enough  
white colour on an object or the colour  
temperature is not suitable.  
By taking a shot of a white object to  
fill the screen, adjust the white balance  
again.  
BLC  
OFF  
The MENU screen is displayed.  
B&W/COLOUR MODE ..  
DURING OPERATION  
DISPLAYING RESULT  
2. Set the cursor (>) to a desired  
If you wish to change the set values of  
another items, repeat items 2. to 5.  
above.  
sub-menu using the  
,
button.  
MENU  
ERROR : LOW LIGHT  
S YNC ADJ UST ..  
ALC SE T T I NGS ..  
V I DEO ADJ UST ..  
MODE SE L ECT ..  
Displayed when the light is low. In-  
crease the illumination then re-adjust  
the white balance.  
6. Press the MENU button.  
The screen returns to the previous one  
(MENU screen).  
AWC NG : OBJECT  
AWC ERROR : LOW LIGHT  
MOT I ON  
TECT ..  
DE  
COMMUN I CAT I ON ..  
MA I NTENANCE ..  
F ACTORY SETT I NGS ..  
ERROR : HIGH LIGHT  
Displayed when the light is too bright.  
Decrease the illumination then re-ad-  
just the white balance.  
7. Press the MENU button.  
The screen returns to the normal screen  
(quitting the menu display).  
OBJECT ERROR  
LOW LIGHTING  
3. Press the SET button.  
The selected sub-menu screen is  
displayed.  
MEMO  
* When the setting is executed using the RM-  
P2580, use a joy stick instead of the  
button.  
Even if you press the AWC button, the white  
balance will not be re-adjusted during the  
operation in the black-and-white mode.  
AWC ERROR : HIGH LIGHT  
ALC SET T I NGS  
I R I S LE VEL  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
L OL UX MODE  
SENSE UP  
NORMAL  
8 :  
NORMAL  
2 0 dB  
OFF  
2
OVER LIGHTING  
OFF  
PR I OR I T Y  
– – –  
BLC  
OFF  
B&W/COLOUR MODE ..  
E-22  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
The flow of menu screen  
Page 26  
Page 27  
MENU  
SYNC ADJUST  
SHUTTER / Ex DR  
V
H
PHASE  
PHASE  
SHUTT ER SPEED  
F AST I M I T  
E DR LEVEL  
1
/
120  
S YNC ADJ UST ..  
ALC SE T T I NGS ..  
– – –  
– – –  
– – –  
L
x
V
I
DEO ADJ UST ..  
MODE SE L ECT ..  
MOT I ON TECT ..  
SC COARSE  
SC I NE  
F
M . E xDR SPEED  
DE  
COMMUN I CAT I ON ..  
MA I NTENANCE ..  
Page 26  
F ACTORY SETT NGS ..  
I
ALC SET T NGS  
I
I R I S LE VEL  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
LOL UX MODE  
SENSE UP  
NORMAL  
8 :  
NORMAL  
2 0 dB  
OFF  
2
OFF  
Page 37  
WH I T E BALANCE CONTROL  
AWC SE T ..  
Page 31  
Page 36  
PR I OR I T Y  
BLC  
– – –  
OFF  
V I DEO ADJ UST  
B&W/COLOUR MODE ..  
WH I TE BAL ANCE  
COLOUR L EVEL  
ENHANCE LEVEL  
PEDEST AL LEVEL  
AUTO BL AC K CT L  
ATW  
NORMAL  
NORMAL  
NORMAL  
OF F  
R
:
:
B
G
g
M
:
:
Page 32  
MODE SELECT  
CAMERA I T L E ED I T ..  
T
REVERSE MODE  
HL I MODE  
OF F  
OF F  
E
AL M . T I TLE  
AL ARM COLOUR  
S
I Z  
DOUBLE  
WH I TE  
AUX TERMINAL  
D. Z00M MAX  
(B&W IN)  
x2  
Page 34  
Page 39  
Page 30  
MOT I ON DET EC T  
B&W/COLOUR MODE  
MODE  
L EVEL  
AREA ED I T ..  
OFF  
NORMAL  
B&W  
AUTO LEVEL  
A U X  
AL ARM  
T
I
ME  
1 0 s  
DEMONSTRA T I ON ..  
Page 35  
COMMUN I CAT I ON  
S TYLE  
MACH I NE  
P TO P  
– – –  
I
D
Page 38  
Page 42  
Page 42  
CAMER A  
0 1 2 3 4 5 6 7 8  
ABC DE FG H I J K L MNO P  
QRS T U VWXY Z  
T
E
/
I
9
T L  
-
:
.
,
MA I NT ENANC E  
CCD SPOT  
CCD SPOT . .  
CANCEL  
EXECUTE  
a
q
b c d e  
f
g
h
i
j
z
k
l
mn o p  
r
s
t
u v w x y  
ÄÖÜ ÂÊ Î ÔÛÇÑ  
ä ë  
ï
ì
ö ü â ê  
ò ù ç ñ ß  
î
ô û á é  
í
ó ú  
¡
¿
à
è
Page 35  
W I DE  
T E L E  
a y  
T
i
t
l
e
D
i
s
l
F ACTORY SE TT I NGS  
h e a t u p 3 0 m i n i n a d v a n c e  
n e e d L e n s c a p t o  
e
x
e
c
u
t
e
CANCEL  
(
CLE AR W I THOUT  
T
I T LE )  
(
CLE AR AL L )  
E-24  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
SYNC ADJUST Screen  
This executes the setting regarding synchronization.  
Item  
Functions and set values  
Initial value  
Item  
Functions and set values  
Initial value  
SHUTTER  
/ExDR  
This sets the electronic shutter as well as the ExDR (Extended  
Dynamic Range).  
NORMAL  
V PHASE  
This adjusts the vertical synchronization to those of other cameras  
when a selector switch for the synchronizing system on the side  
is at LL. (50Hz power region only.)  
When it is not set to LL, “---” will appear, disabling change  
the set value.  
[Set value: –156 to 0 to 156]  
0
The use of an electronic shutter function enables shooting with  
proper brightness, as more brightness results in higher shutter  
speed.  
The ExDR function allows even the shooting of a subject having  
different luminous flux density by composing a picture shot at 1/  
100 sec. shutter speed with a picture shot by a high-speed  
shutter.  
NORMAL: This fixes the shutter speed to 1/50.  
The ExDR does not function.  
H PHASE  
This adjusts the horizontal synchronization to those of other  
cameras and systems when a selector switch for the  
synchronizing system on the side is at INT/GL.  
When external signals are not input, “---will appear, disabling  
change the set value.  
0
MANUAL: This sets the shutter speed by the item SHUTTER  
SPEED on the SHUTTER screen.  
The ExDR does not function.  
When SENSE UP is functioning, MANUAL cannot be  
selected. (Not displayed on MENU)  
[Set values: –16 to 0 to 16]  
AUTO:  
This automatically switches the shutter speed  
according to brightness.  
SC COARSE  
Coarse adjustment of the SC phase in gen-lock operation.  
The SC phase can be varied by up to 90° in each direction.  
Adjust with reference to another camera (or system) and  
together with the SC FINE adjustment.  
0°  
The ExDR does not function.  
The item FAST LIMIT on the SHUTTER (ExDR) screen  
sets a maximum shutter speed value.  
M.ExDR: This is used when shooting a subject with difference  
in a luminous flux density in the screen under a fixed  
illumination condition, and so on. During ExDR mode,  
the item M.ExDR.SPEED on the SHUTTER (ExDR)  
screen sets the composing high shutter speed. It is  
possible to set only when the items BLC and SENSE  
UP are OFF. What’s more, the ExDR LEVEL sets the  
signal level of the composing high-speed shutter.  
A.ExDR: This is used when the subjects having different  
luminous flux densities are continuously used night  
and day in the situation where both indoor and outdoor  
subjects are mixed in existence, and so forth. During  
ExDR mode, the composing shutter speed  
automatically varies according to the contrast of a  
subject. This is set when shooting the subject with  
changing brightness.  
Adjust SC COARSE and SC FINE only after adjusting H  
PHASE.  
When it is not set to GL, “---” will appear, disabling change  
the set value.  
[Set values: 0°, 90°, 180°, 270°]  
SC FINE  
Fine adjustment of the SC phase in gen-lock operation.  
When it is not set to GL, “---” will appear, disabling change  
the set value.  
128  
[Set values: 0 to 255]  
ALC SETTINGS Screen  
This can be set only when the item BLC is OFF.  
What’s more, the ExDR LEVEL sets the signal level  
of the composing high-speed shutter.  
This makes automatic adjustments according to brightness.  
MEMO  
• Do not set to A.ExDR when using a manual lens.  
• When M.ExDR mode or A.ExDR mode is used, the border  
between a bright part and a dark part can be coloured (cyan,  
orange, etc.), but this is not a malfunction.  
• When the SHUTTER/ExDR item is set to M.ExDR or  
A.ExDR, a flicker can occur under a fluorescent lamp,  
mercury lamp, etc. However, this occurs by principle of the  
ExDR function, and therefore this is not a malfunction.  
Item  
Functions and set values  
Initial value  
Adjusts the brightness level of the video signal.  
To lower the brightness level ... Decrease the value  
To raise the brightness level .... Increase the value  
[Set values: –5 to NORMAL to 5]  
NORMAL  
IRIS LEVEL  
Sets the exposure detection as a ratio of the average value  
and the peak value.  
8 : 2  
AVERAGE:  
PEAK  
* When the SHUTTER (ExDR) item is set to NORMAL, the following items  
(SHUTTER SPEED, FAST LIMIT, ExDR LEVEL, and M.ExDR SPEED) cannot  
be changed.  
• AVERAGE value large: Increase the AVERAGE value  
when portions other than the highlighted areas of the  
screen are dark and look corrupted. (Ex. 10:0)  
• PEAK value large: Increase the PEAK value when  
halation occurs in the highlighted areas of the screen.  
(Ex. 5:5)  
SHUTTER  
SPEED  
This sets a shutter speed when MANUAL is set.  
The AUTO, M. ExDR, A. ExDR set value is displayed as  
“- - -” and cannot be changed  
[Set values: 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, and 1/  
10000]  
1/120  
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]  
E-26  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
ALC SETTINGS Screen (Continued)  
Item  
Functions and set values  
Initial value  
Item  
Functions and set values  
Initial value  
FAST LIMIT  
This sets the fastest value of a shutter speed when AUTO is set.  
1/100000  
MOTION  
PRIORITY  
This item sets the order in which the AGC and slow shutter  
speed decrease function when the object brightness  
The MANUAL, M. ExDR, A. ExDR set value is displayed as “- - -” and  
cannot be changed. The higher the shutter speed becomes, the more  
smear phenomenon is emphasized, which is peculiar to the CCD.  
[Set values: 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/40000, 1/100000]  
becomes low.  
If B&W item of the B&W/COLOUR mode is set to AUTO, and the  
AGC MODE item or the SENSE UP item is set to OFF, - - -” will  
appear, disabling any setting.  
ExDR  
LEVEL  
This sets the signal level of the composing high-speed shutter during  
ExDR mode. This is set according to the brightness of a subject.  
When using M.ExDR, be sure to set M.ExDR SPEED in advance.  
When the SHUTTER/ExDR item is set to MANUAL or AUTO,  
“- - -” appears, disabling setting.  
NORMAL  
MOTION: Priority is given to motion.  
This is suitable to a subject with quick motion,  
since the AGC (automatic gain control) functions  
with priority when the subject becomes dark.  
PICTURE: Priority is given to image.  
To give priority to the low-brightness parts of the subject…  
increase the value  
To give priority to the high-brightness parts of the subject…  
decrease the value  
When the subject becomes dark, SENSE UP  
(sensitivity goes up) functions with priority,  
offering suitability that gives priority to image.  
[Set values: –5 to NORMAL to 5]  
MEMO  
• In the case of a subject with a large difference in the luminous flux  
density, sometimes images do not change even if ExDR LEVEL is  
varied. However, this occurrence is a peculiarity of the unit and is  
not a malfunction.  
Sets the backlight compensation function. Set when a  
bright light source, etc. is placed in the same direction as  
the subject.  
BLC  
OFF  
M.ExDR  
SPEED  
This sets the composing high shutter speed when ExDR is set to M.ExDR.  
Set the shutter speed in order that a subject with a high luminous flux  
density (outdoor, etc.) may come out most clearly. This is displayed as “-  
- -” during MANUAL, AUTO or A. ExDR and cannot be set.  
1/4000  
20dB  
If the item SHUTTER/ExDR is set to the M.ExDR or the  
A.ExDR, “- - -” will appear, and the BLC does not function.  
[Set values: 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000]  
OFF:The backlight compensation function does not work.  
AGC MODE  
This sets a maximum gain of the AGC (Automatic Gain Control).  
OFF:  
10dB:  
20dB:  
When the AGC function is not used.  
When luminous energy is insufficient.  
When luminous energy is extremely insufficient.  
AREA 1 to AREA 4:When the SET button is pressed, the  
fixed light metering areas are displayed. Select one of  
the four types.(Indicated positions on the screen are rough  
guides. Execute required settings after checking and  
confirming the functions on actual images.)  
SUPER: When brightness is insufficient even when it is set to 20dB.  
• If the gain is increased, the screen gets rough in a dark place.  
• If it is set to SUPER, it can sometimes consume operation time to  
cope with a drastic level change.  
When the item “B&W” is set to “AUTO”, [SUPER] is displayed when  
the item “AGC MODE” is set to “SUPER”, and [20dB] is displayed for  
other settings. Increase the gain up to the value displayed.  
Light  
Light  
Light  
Light  
Light  
metering metering metering metering metering  
area  
area  
area  
area  
area  
LOLUX MODE  
SENSE UP  
Used when brightness is low even when setting the AGC MODE.  
(Functions regardless of the AGC MODE setting.)  
OFF: LOLUX MODE is off  
OFF  
OFF  
ON: LOLUX MODE is on (+ 6dB)  
OFF  
AREA 1  
AREA 2  
AREA 3  
AREA 4  
This item makes up a sensitivity should be heightened automatical-  
ly when a subject becomes dark.  
In case of the X32 AUTO, the sensitivity is automatically heightened  
up to 32 times continuously as compared with standard.  
As the sensitivity becomes higher, the shutter speed becomes lower,  
resulting in unnatural motion.  
* The indicated position on the screen should be used as  
a rough guide.  
EDIT 1 to EDIT 2: When the SET button is pressed, the  
user light metering areas are displayed. Select one of the  
two types.  
If SHUTTER/ExDR is set to MANUAL or the M.ExDR,  
“- - -” will appear, disabling the SENSE UP function.  
[Set values: OFF, X2 AUTO, X4 AUTO, X8 AUTO, X16 AUTO, X32  
AUTO]  
“BLC EDITTING Screen” on page 36.  
MEMO  
• When the magnification of SENSE UP is enhanced, the screen  
can become coarse or whitish, or whitish flaws can emerge  
sometimes, but this is not abnormal.  
• When the item SENSE UP is set other than to OFF, a flicker can  
occur under a fluorescent lamp, mercury lamp, etc. However, this  
occurs by principle of SENSE UP, and therefore this is not a  
malfunction.  
E-28  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
ALC SETTINGS Screen (Continued)  
VIDEO ADJUST Screen  
Adjustments are made on video signals.  
Item  
Functions and set values  
Initial value  
Item  
WHITE  
Functions and set values  
Initial value  
This function sets the colour modes to colour or B&W.  
When switching the mode between “colour’’ and “B&W”  
is carried out, the focus may be dislocated. In such a case  
adjust the focus again.  
B&W COLOUR  
MODE ..  
Selects the white balance adjustment function.The white  
balance can be adjusted manually or automatically for  
light within the colour temperature range of 2500K to  
8000K.  
ATW  
BALANCE  
Switches the mode from colour to B&W and visa-versa.  
OFF : Turns the B&W mode switching function off.  
AUX  
B&W  
ATW:  
Auto-Tracking White Balance mode.  
This automatically adjusts the white balance.  
Auto White Balance Controll mode.When the  
SET button is pressed, the adjustment  
screen appears.  
ON  
: Sets the camera permanently to B&W mode.  
AUTO : The camera automatically switches to Colour  
mode when the object is bright and B&W mode  
when it is dark. (Page 40)  
• AWC:  
AUX : B&W/COLOUR switching is carried out  
according to the signal input from the AUX  
terminal. (Page 41)  
(See page 37.)  
MEMO  
The “- - -” will appear during operation in the black-and-  
white mode and any setting cannot be changed.  
MEMO  
• If AUTO is selected as the B&W item, the B&W/COLOUR  
setting can be switched as appropriate according to the  
brightness of the object, but illumination and screen  
conditions may make this impossible. Moreover, when  
you use infrared illumination, if the subject excessively  
reflects, a B/W screen can switch to a colour screen.To  
make absolutely certain of B&W/COLOUR switching,  
set to AUX and input the control signal to the AUX  
terminal.  
• If AUX is selected as the B&W item, the AUXTERMINAL  
item is automatically set to B&W IN. If this changes to  
anything other than AUX, the AUX TERMINAL item  
reverts to the value set before the change was made.  
(Page 33.)  
To adjust the colour level of the video signal.  
To make colours lighter … Decrease the value  
To make colours darker … Increase the value  
[Set values: –5 to NORMAL to 5]  
COLOUR  
LEVEL  
NORMAL  
MEMO  
The “- - -” will appear during operation in the black-and-  
white mode and any setting cannot be changed.  
To adjust the contour enhancing level of the video signal.  
To make the picture quality harder … Increase the value  
To make the picture quality softer … Decrease the value  
[Set values: –5 to NORMAL to 5]  
ENHANCE  
LEVEL  
NORMAL  
NORMAL  
OFF  
To adjust the pedestal level of the video signal.  
To brighten picture … Increase the value  
To darken picture … Decrease the value  
[Set values: –5 to NORMAL to 5]  
PEDESTAL  
LEVEL  
AUTO  
LEVEL  
When the “B&W” function is set to “AUTO”, this function  
sets the signal level of the object at which the camera will  
automatically switch to B&W mode.  
LOW : Switches to B&W mode when the signal level of  
the object indicates low illumination.  
NORMAL: Switches to B&W mode when the signal level of  
the object indicates medium illumination.  
HIGH : Switches to B&W mode when the signal level of  
the object indicates high illumination.  
NORMAL  
This is set when it is difficult to view a dark part of the  
image even if gain is boosted by the AGC (automatic gain  
control).  
ON: When a black level of the image signal is low, a  
pedestal level that becomes the standard of black  
is automatically elevated, making it easier to view a  
dark part.  
AUTO  
BLACK  
CTL  
MEMO  
OFF: AUTO BLACK does not function.  
When the item “B&W” is set to other than AUTO, “- - -” is  
displayed and the settings to the item “LEVELcannot be  
varied.  
MEMO  
• When PEDESTAL LEVEL is set to 5, no function can  
take place even if AUTO BLACK CTL is ON.  
• When AGC MODE is set to OFF, no function can take  
place even if AUTO BLACK CTL is ON.  
E-30  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
MODE SELECT Screen  
Titles, image reversion, etc., are set.  
Item  
Functions and set values  
Initial value  
Item  
Functions and set values  
Initial value  
Bring up the CAMERA TITLE, EDIT screen.  
(Page 38)  
For setting the signal input or output of the AUX terminal.  
(B&W IN)  
CAMERA  
TITLE EDIT  
AUX  
TERMINAL  
MOTION: A signal is output if there is a change in the  
area set on the MOTION DETECT screen.  
B&W OUT: A signal is output when the camera switches  
to B&W or Colour mode.  
Settings are executed for image reversion.  
OFF: Image does not reverse.  
U-D: Up and down of the image are reversed.  
R-L: Left and right of the image are reversed.  
ALL: Up and down and left and right of the image are  
reversed.  
REVERSE  
MODE  
OFF  
B&W IN:  
Set to this position when inputting the B&W/  
Colour switching control signal to the AUX  
terminal. (Page 11, 30.)  
The highlighted part of the image is made black to make  
the surroundings of the highlighted part better visible. Set  
to HIGH when there are many highlighted parts.  
[Set values: OFF, LOW, MIDDLE, HIGH]  
HLI MODE  
OFF  
MEMO  
• In setting B&W OUT, if you use an infrared illuminator in  
link motion, hunting can occur. To prevent this, we  
recommend that you link in motion this unit and the  
infrared illuminator, etc., by control signals after setting  
to B&W IN.  
Set the size of the characters displayed in the case of  
alarms.  
ALM.TITLE  
SIZE  
DOUBLE  
• If the B&W item is set to AUX, the AUX TERMINAL item  
changes to [B&W IN] and can not be changed.  
A L A R M  
AL ARM  
x2  
This function sets the maximum zoom ratio of the  
electronic zooming.  
[Set values: x1, x2, x4, x6, x8, x10]  
D.ZOOM  
MAX  
MEMO  
NORMAL  
DOUBLE  
• The electronic zoom function can only be used by the  
communication command of exclusive controllers (RM-  
P2580, etc.).  
• Note Picture quality deteriorates under electronic  
zooming as it is accompanied by digital image  
processing.  
• When the electronic zoom magnification ratio is  
increased, there may be blurring in the upper center left  
of the screen. This is a characteristic of the main unit  
and is not a malfunction.  
This sets the colour of an alarm title.  
[Set values: WHITE, GREEN, CYAN, YELLOW]  
ALARM  
COLOUR  
WHITE  
MEMO  
In the ALARM mode, the colour of camera title appears  
in the ALARM COLOUR set.  
E-32  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
COMMUNICATION Screen  
MOTION DETECT Screen  
Settings are made for the control signal-connecting terminals on the back.  
If the setting is changed, be absolutely sure to switch on the power again.  
Settings are executed about the motion detecting function that emits alarm signals when  
there exists any motion in the image. Alarm signals are output from the auxiliary terminals on  
the back.  
Item  
STYLE  
Functions and set values  
Initial value  
Item  
MODE  
Functions and set values  
Initial value  
P TO P  
This sets a communication system according to the system  
used.  
This sets ON/OFF of motion detecting function.  
OFF  
P TO P (Point to point)  
OFF:  
ON:  
Motion detecting function does not work.  
Motion detecting function works.  
This is set when a remote control unit controls a camera.  
M.DROP (Multi-drop)  
This is set when a remote control unit controls a plural  
number of cameras.  
LEVEL  
This sets the level that detects motion.  
If the item MODE is set to OFF, - - -” will appear, and  
settings cannot be changed.  
NORMAL  
MACHINE ID  
This is set when the STYLE item is set to M.DROP. This  
is the number that identifies individual cameras in a group.  
No proper function can be realized if an ID number is  
repeated within a system.  
– – –  
To function with large signal level change…decrease the  
value  
To function with small signal level change…increase the  
value  
A combined use with the RM-P2580 necessitates the  
setting together with the video input number of the RM-  
P2580.  
If the item STYLE is set to P TO P, - - -” will appear, and  
settings cannot be changed.  
[Set values: –5 to NORMAL to 5]  
This sets the range in which the motion detecting function  
works.  
AREA EDIT  
(Page 39)  
MAINTENANCE Screen  
ALARM TIME  
This sets the output time of the alarm signal output of  
AUX terminal as well as “ALARM” display on the screen  
when motion is detected.  
10s  
White spot compensation is performed.  
Item  
Functions and set values  
Initial value  
If the item MODE is set to OFF, - - -” will appear, and  
settings cannot be changed.  
[Set values: OFF, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 30s,  
1min]  
The white spots on the screen, which are characteristic  
for CCDs can be reduced.  
Page 42 “White Spot Compensation”  
CCD SPOT  
MEMO  
FACTORY SETTINGS Screen  
Set values are returned to initial values.  
Even when the ALARM TIME item is set to OFF, an alarm  
signal is output from the AUX terminal for about 500ms,  
and “ALARM” is not displayed on the screen.  
Item  
Functions and set values  
Initial value  
This is used when checking and confirming the set motion  
detecting function. The detection area is shown in gray.  
(Page 39)  
DEMONSTRATION  
The values set on the menu are returned to initial values.  
FACTORY  
SETTINGS  
CANCEL  
: No return to the initial value.  
: Returns set values except titles to the  
initial value.  
CLEAR  
(WITHOUT TITLE)  
CLEAR (ALL) : Returns all set values including titles  
to the initial value.  
Select respective set value and press the SET button.  
Then, “DATA CLEARED” will appear for about 3 seconds.  
Be sure not to switch off the power while the display is still  
on.  
MEMO  
However, when FACTORY SETTINGS by means of  
transmitted commands, the contents of the  
COMMUNICATION menu do not return to the factory  
settings.  
E-34  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
BLC EDITTING Screen  
Manual Adjustment of White Balance  
It is possible to set freely the light metering area for backlight compensation. The 2 screens  
of EDIT1 and EDIT2 can be set.  
When automatic adjustment of the white balance results in a “reddish screen”, etc., adjust the  
white balance manually.  
MENU button  
SET button  
ALC SET T I NGS  
I R I S LE VEL  
NORMAL  
8 :  
NORMAL  
2 0 dB  
OFF  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
LOL UX MODE  
SENSE UP  
2
MENU button SET button  
1. Set the WHITE BALANCE item on the  
VIDEO ADJUST screen to AWC and  
press the SET button.  
SET  
OFF  
CAMERA  
SETUP  
PR I OR I T Y  
BLC  
MOT I ON  
EDIT 1  
AWC  
* The WHITE BALANCE adjustment  
screen appears on the monitor.  
* Select AWC SET, and press the SET  
button. AWC (white balance adjust-  
ment) is performed, and the WHITE  
BALANCE CONTROL screen appears  
on the monitor.  
MENU  
B&W/COLOUR MODE  
SET  
CAMERA  
SETUP  
AWC  
MENU  
EDIT 1 screen  
1. Set the item BLC on the ALC  
Light metering  
area  
SETTING screen to EDIT1.  
2. Select the hue to be adjusted. (R/B or  
Mg/G)  
2. Press the SET button.  
Press the  
or  
button.  
The EDIT1 screen is brought up.  
3. Adjust the hue.  
3. Set the upper side and left side  
of the metering area using the  
button.  
SET button  
V I DEO ADJ UST  
Press the or  
button.  
WH I TE BAL ANCE  
COLOUR L EVEL  
ENHANCE LEVEL  
AWC  
..  
NORMAL  
NORMAL  
NORMAL  
OF F  
* The “ ı ” indicator moves in accordance  
with the setting. When a setting is  
changed, the “+” mark appears at the  
original position.  
PEDEST AL LEVEL  
AUTO BL AC K CT L  
The sides having  
be changed.  
marks can  
4. Press the SET button.  
4. Concluding manual white balance ad-  
justment.  
The changeable sides of the metering  
area move to the right side and base  
side.  
VIDEO ADJUST screen  
Pushing the MENU button returns the  
screen to VIDEO ADJUST.  
EDIT 2 screen  
5. Set the base and right side of the  
metering area using the  
button.  
WH I T E BALANCE CONTROL  
MEMO  
AWC SE T  
..  
R
M
:
:
:
:
B
G
If the mode is changed from colour to black-  
and-white during the colour phase adjustment  
on theWHITE BALANCE CONTROL screen,  
the VIDEO ADJUST screen will be brought  
back. At this time, any adjusted value will not  
be saved.  
Light metering  
area  
g
If the SET button is pressed once more,  
the two changeable sides of the meter-  
ing area return to the top and left sides.  
(The EDIT2 screen can also be set  
likewise)  
SET button  
WHITE BALANCE  
CONTROL screen  
6. Upon completion of setting,  
press the MENU button.  
The screen returns to ALC SETTING  
SCREEN.  
* To use the set metering area, set the item  
BLC to EDIT1 or EDIT2.  
* The indicated position on the screen  
should be used as a rough guide.  
E-36  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
CAMERA TITLE Setting  
Setting the MOTION DETECT Function  
Up to 24 characters can be selected as camera text for each camera. The set characters are  
displayed at the bottom of the screen.  
It is possible to set freely the area where MOTION DETECTING functions.  
MENU button SET button  
1. Select the item CAMERA TITLE  
1. Select the item AREA EDIT on  
MOT I ON DET EC T  
MODE  
on the MODE SELECT screen,  
and push the SET button.  
the MOTION DETECT screen.  
OFF  
NORMAL  
L EVEL  
AREA ED I  
T
..  
AL ARM T I ME  
DEMONSTRA T I ON ..  
1 0 s  
Then, the CAMERA TITLE screen is  
brought up.  
2. Press the SET button.  
SET  
CAMERA  
SETUP  
The setting screen is brought up.  
AWC  
MENU  
2. Select the first character from the  
character area using  
buttons.  
3. Select the area not subject to  
detection using the  
MOTION DETECT screen  
flash  
button.  
The selected character is displayed  
flashing on and off.  
The area flashing ON and OFF in black  
and white moves.  
3. Push the SET button.  
The first character gets fixed and the  
blinking title input area moves to the  
second character.  
4. Press the SET button.  
The area not subject to detection is set,  
and it turns gray (lights up).  
To cancel the set area, press the SET  
button again.  
MODE SELECT  
CAMERA I T L E ED I T ..  
T
REVERSE MODE  
AL M . T I TLE S I Z  
AL ARM COLOUR  
OF F  
DOUBLE  
WH I TE  
E
AUX TERMINAL  
D. ZOOM MAX  
(B&W IN)  
x2  
4. Repeat the above items 2 to 3.  
It is possible to use up to 24 characters  
to input the title.  
5. Repeat items 3 and 4 above.  
MODE SELECT screen  
6. Upon completion of setting,  
press the MENU button.  
The screen returns to the MOTION  
DETECT menu.  
Setting screen  
5. Push the MENU button.  
The screen returns to MODE SELECT.  
lights gray  
flash  
Space  
Character area  
MEMO  
CAMER A  
0 1 2 3 4 5 6 7 8 9  
ABC DE FG H I J K L MNO P  
QRS T U VWXY Z  
T
E
/
I
T L  
• Indicated positions on the screen are rough  
guides.  
Be sure to check and conform the positions  
on the actual screen.  
-
:
.
,
a b c d e f g h  
u v w x y z  
ÄÖÜ ÂÊ Î ÔÛÇÑ  
i
j
k l mn o p  
q
r
s
t
ä ë  
à è  
ï
ì
ö ü â ê î ô û á é  
ò ù ç ñ ß  
í
ó ú  
¡
¿
* It is possible to check and confirm the set  
areas on the DEMONSTRATION screen.  
The detection area is shown in gray.  
• The MOTION DETECT function does not  
work for about 5 seconds after exiting  
MENU.  
W I DE  
T E L E  
CAMERA TITLE screen  
Title input area  
Displayed when making  
communication settings only  
The motion detector is not a feature to prevent theft, fire, etc. Even if an accident should occur  
resulting in damage, we do not accept any liability.  
E-38  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Output of Black-White/Colour switching signal  
Control by Black-White/Colour switching signal from the outside  
It is possible to output black-white/colour switching signal from the AUX terminal on the back  
of this unit. Perform the following settings.  
Carry out the following setting when you link in motion the black-white/colour switching of this  
unit and infrared illumination, etc., using the switching signal from the outside control device.  
Infrared illumination, etc.  
Switching  
signal  
Set the B&W Item to AUTO.  
+
1
-
2
B&W: Make signal  
COLOUR: Break  
signal  
MENU button SET button  
1. Select the B&W/COLOUR MODE item  
on the ALC SETTING screen.  
TX  
+
TX  
-
RX  
+
RX  
-
AUX GND  
A
B
C
D
2. Press the SET button.  
Y/C OUT  
Sensor or switch  
Outside control device  
The B&W/COLOUR MODE screen  
SET  
SYNC IN  
POWER  
VIDEO OUT  
CAMERA  
SEE INST-  
appears.  
RUCTION  
MANUAL  
SETUP  
AWC  
MENU  
3. Press either the  
button and select the B&W item.  
button or the  
button or the  
It is requested that you consult our JVC dealer about connecting  
devices, etc.  
4. Press either the  
button and set to “AUTO”.  
Set the B&W item to AUX.  
5. Upon completion of setting, press the  
MENU button SET button  
1. Select B&W/COLOUR MODE on  
MENU button twice.  
the ALC SETTING screen.  
Then, the MAIN MENU screen is  
brought back.  
B&W/COLOUR MODE  
2. Press the SET button.  
SET  
Set the AUX TERMINAL Item to  
B&W OUT.  
CAMERA  
SETUP  
B&W  
AUTO LEVEL  
AUTO  
NORMAL  
• The B&W/COLOUR MODE screen  
appears.  
AWC  
MENU  
1. Select MODE SELECT on the MAIN  
MENU screen.  
3. Press either the button or the  
button and select the B&W  
item.  
2. Press the SET button.  
The MODE SELECT screen appears.  
3. Press either the  
button or the  
button and select the AUX TERMINAL  
item.  
ALC SET T I NGS  
4. Press either the button or the  
I R I S LE VEL  
AVERAGE : PEAK  
SHUTT ER / E x DR  
AGC MODE  
LOL UX MODE  
SENSE UP  
NORMAL  
8 :  
NORMAL  
button and set to “AUX”.  
2
MODE SELECT  
CAMERA I T L E ED I T  
4. Press either the  
button or the  
Then, the AUX TERMINAL item on the  
MODE SELECT screen is automatically  
set to (B&W IN). Refer to Page 33.  
2 0 dB  
OFF  
OFF  
T
button and set to ”B&W OUT”.  
..  
REVERSE MODE  
HLI MODE  
OF F  
OFF  
5. Upon completion of setting, press the  
PR I OR I T Y  
MOTION  
E
AL M . T I TLE S I Z  
AL ARM COLOUR  
DOUBLE  
WH I TE  
BLC  
ED I T  
1
MENU button twice.  
B&W/COLOUR MODE ..  
AUX TERMINAL  
D. ZOOM MAX  
(B&W IN)  
x2  
• Then, the normal screen is brought  
back.  
5. Upon completion of setting,  
press the MENU button.  
• Then, the ALC SETTING screen is  
brought back.  
MEMO  
• When you use infrared illumination, if the  
subject excessively reflects, a B/W screen  
can switch to a colour screen.  
To perform switching with higher accuracy,  
we recommend that you use it by the setting  
mentioned in [Control by Black-White/  
Colour Switching Signal From the Outside],  
referring to Page 41.  
B&W/COLOUR MODE  
B&W  
CAUTION:  
When you use near infrared ray illumi-  
nations, use a lens that is compatible  
with the near infrared ray illuminations.  
Any lens other than the compatible one  
can result in out-of-focus due to such  
characteristics.  
CAUTION:  
AUTO  
AUTO LEVEL  
NORMAL  
When you use near infrared ray illumi-  
nations, use a lens that is compatible  
with the near infrared ray illuminations.  
Any lens other than the compatible one  
can result in out-of-focus due to such  
characteristics.  
E-40  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHERS  
Specifications  
White spot compensation  
Image pickup device:  
Synchronization method :  
Scanning frequency:  
Resolution:  
VIDEO OUT:  
Y/C OUT:  
1/3 type IT CCD, 752 (H) × 582 (V)  
Internal, Line lock, Full Genlock  
(H) 15.625 kHz, (V) 50 Hz  
480 TV lines (H)  
Composite video signal 1 V (p-p), 75 1 (BNC)  
CCDs have the general characteristic that white spots appear on the screen when the CCD is  
operated at high temperatures or when they are used with a slow shutter speed.  
This unit has a built-in white spot compensation function to reduce these white spots.  
(The number and the size of the white spots changes according to the use temperature, the  
shutter speed, etc. Furthermore, there is a limit on the number of white spots that can be  
compensated.)  
Y: 1.0 V (p–p), 75 1  
C: 0.3 V (p–p), 75 1  
Video S/N ratio:  
Minimum required illumination:  
50 dB (AGC OFF)  
0.9 lx (50 %, F1.2, AGC 20 dB)  
Operation method  
1. Attach a lens cap or similar.  
MA I NTENANC E  
0.45 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE)  
0.45 lx (25 %, F1.2, AGC 20 dB)  
0.23 lx (25 %, F1.2, AGC 20 dB, LOLUX MODE)  
0.03 lx (50 %, F1.2, AGC 20 dB, B&W MODE)  
0.015 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, B&W MODE)  
0.015 lx (25 %, F1.2, AGC 20 dB, B&W MODE)  
0.03 lx (50 %, F1.2, AGC 20 dB, SENSE UP × 32)  
0.014 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, SENSE UP × 32)  
RS-422A or RS-485 (switchable)  
9600 bit/s  
• Prevent entry of light to the CCD.  
CCD SPOT . .  
• Switch on the camera power supply  
and wait for at least 30 minutes.  
2. Display the MAINTENANCE  
screen.  
• Confirm that the cursor (>) is at the item  
CCD SPOT.  
Communication:  
Lens mount:  
CCD SPOT  
3. Press the SET button.  
C/CS mount  
CANCEL  
EXECUTE  
• The CCD SPOT screen will be dis-  
Power supply and power consumption: TK-C1430E AC 24 V ` 50 Hz/60 Hz, DC 12 V --- 530 mA  
played.  
TK-C1431EG AC 220 V – AC 240 V `, 50 Hz/60 Hz, 75 mA  
Ambient temperature:  
Mass:  
–10 °C to 50 °C (operation)  
0 °C to 40 °C (recommended)  
TK-C1430E 620 ˝  
• If you do not want to perform white spot  
compensation, move the cursor (>) to  
CANCEL and press the SET button.  
h e a t u p 3 0 m i n i n a d v a n c e  
TK-C1431EG 840 ˝  
n e e d L e n s c a p t o e x e c u t e  
Accessory:  
Instructions .................... 2 Ferrite core ..................... 1  
4P plug .......................... 1  
4. Move the cursor (>) to EXECUTE.  
DIMENSIONS (Unit: mm)  
5. Press the SET button.  
• White spot compensation will operate.  
(“SPOT SCAN OPERATION” is dis-  
played during operation.)  
149  
138  
70  
U1-32  
39  
2400  
6. Confirm the display.  
• When white spot compensation has  
been performed correctly, SPOT  
SCAN OK” is displayed for about 5  
seconds, and then return is made to  
the CCD SPOT screen.  
(TK-C1431EG)  
42  
71  
1/4 – 20UNC  
41  
SPOT SCAN OK  
• When “SPOT SCAN ERROR: HIGH  
LIGHT” is displayed, check that no light  
enters into the CCD.  
7. Press the MENU button.  
• Return to the MENU screen will be  
made.  
Design and specifications are subject to change without notice.  
E-42  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Marine Sanitation System 65142X XX User Manual
Jura Capresso Coffeemaker IMPRESSA E40 User Manual
JVC Camcorder YU30052 513 2 User Manual
JVC Flat Panel Television CO 46LCD BD User Manual
JVC Stereo System CA MXGT91R User Manual
Kairak Refrigerator KRES User Manual
Kenmore Microwave Oven 72162752 User Manual
King Canada Saw KC 10GC User Manual
Kinyo MP3 Docking Station DS 361 User Manual
KiSS Networked Entertainment DVD Player DP 450 User Manual