JVC Digital Camera KY F70 User Manual
Introduction  
Before recording  
Settings and  
adjustments  
for recording  
Digital Camera  
Basic operations  
Model  
KY-F70  
INSTRUCTIONS  
Various  
recording  
methods  
KY-F70  
CAMERA  
DIGITAL  
C-MOUNT  
Menu screen  
settings  
Connecting  
to a PC  
Illustration with optional lens attachment.  
Others  
For Customer Use:  
Enter below the Serial No. which is  
located on the unit. Retain this  
information for future reference.  
This instruction book is made from 100%  
recycled paper.  
Model No. KY-F70  
Serial No.  
SC96847-001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING ON LITHIUM BATTERY  
The battery used in this device may present a  
fire or chemical burn hazard if mistreated. Do not  
recharge, disassemble, heat avobe 100°C or  
incinerate.  
Replace battery with Panasonic (Matsushita  
Electric).  
CR2032, use of another battery may present a  
risk of fire or explosion.  
• Dispose of used battery promptly.  
• Keep away from children.  
•
Do not disassemble and do not dispose of in fire.  
For Sweden  
VARNING  
Explosionsfara vid felaktigt batteribyte.  
Använd samma batterityp eller en ekvivalent typ  
som rekommenderas av apparattillverkaren.  
Kassera använt batteri enligt fabrikantens  
instruktion.  
For Norway  
ADVARSEL  
Lithiumbatteri – Eksplosjonsfare.  
Ved utskifting benyttes kun batteri som anbefalt  
av apparatfabrikanten.  
Brukt batteri returneres apparatieverandøren.  
For Denmark  
ADVARSELI  
Lithiumbatteri – Eksplosionsfare ved fejlagtig  
håndtering.  
Udskiftning må kun ske med batteri af samme  
fabrikat og type.  
Lever det brugte batteri tilbage til leverandøren.  
For Finland  
VAROITUS  
Paristo voi räjähtää, jos se on virheellisesti  
asennettu.  
Vaihda paristo ainoastaan laltevalmistajan  
suoaittelemaan tyyppiin. Hävitä käytetty paristo  
valmistajan ohjeiden mukaisesti.  
E3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1. Introduction  
Features ...........................................................................................................................6  
Accessories and attachments ..........................................................................................6  
Cautionary notes for the correct usage of this product ....................................................7  
Part names and their functions ........................................................................................8  
Explanation of terminals.................................................................................................12  
2. Before recording  
Basic system 1 ...............................................................................................................14  
@ @ @ @ @ @  
Basic system 2 ...............................................................................................................15  
Inserting the lithium battery ............................................................................................16  
Mounting the lens ...........................................................................................................17  
Connecting the power ....................................................................................................18  
Connecting a monitor .....................................................................................................19  
Connecting an MO drive unit..........................................................................................20  
Connecting a printer.......................................................................................................21  
Mounting the camera .....................................................................................................22  
Fall prevention ................................................................................................................23  
3. Settings and adjustments for recording  
Setting the dip switches (Monitor, SCSI ID) ...................................................................24  
Menu settings (VGA model, Lens) .................................................................................25  
Time and date settings ...................................................................................................26  
Monitor adjustment.........................................................................................................28  
Focus adjustment ...........................................................................................................29  
White balance adjustment ..............................................................................................30  
White shading adjustment ..............................................................................................32  
4. Basic operations  
Recording images to the main unit memory ..................................................................34  
Playing back images from the memory ..........................................................................35  
Saving images from the memory to an MO disk ............................................................36  
Outputting images from the memory to a printer ...........................................................37  
Clearing images from the memory .................................................................................38  
E4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Various recording methods  
Recording a PC monitor .................................................................................................40  
Outputting negative images ...........................................................................................41  
Synchronizing flash and FREEZE ..................................................................................42  
About ALC and EEI operations ......................................................................................43  
6. Menu screen settings  
Menu screen flow ...........................................................................................................44  
Setting procedure ...........................................................................................................46  
EXPOSURE screen .......................................................................................................48  
WHITE BALANCE screen ..............................................................................................51  
FREEZE screen .............................................................................................................53  
PROCESS screen ..........................................................................................................53  
SYSTEM SETTING screen ............................................................................................57  
Menu screen of the PLAY mode.....................................................................................59  
REC mode quick menu screen ......................................................................................60  
Resetting settings...........................................................................................................62  
7. Connecting to a PC  
Compatible systems 1 ....................................................................................................64  
Compatible systems 2 ....................................................................................................65  
8. Others  
Specifications .................................................................................................................66  
Characters and symbols used in this instruction book  
CAUTION  
MEMO  
੬
Cautionary notes concerning operation of the unit  
Reference such as restrictions of features, etc.  
Reference page or item  
E5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
Features  
● This digital camera uses three 1.45 million pixel 1/2 inch IT CDD.  
● Newly developed 1/2 inch C mount Dichroic prism for the color separation prism.  
● Capable of recording semi-animation (7.5 frames per second) and still images at resolution of  
1360 × 1024 pixels.  
● Image capturing capability using a capture board since video signals are processed in real-  
time by the built-in DSP and outputted as RGN analog signals of 7.5 frames/sec.  
● Monitor output can be scan-converted to 640 × 480 pixels for output to a VGA monitor.  
● 30 frame/sec. output capability to even a VGA real-time monitor (Draft mode).  
@ @ @ @ @ @  
● Output digital still images to an MO drive or recommended printer using SCSI connection.  
● Export digital still images to a PC using SCSI connection.  
● Remotely control your PC using RS-232C connection.  
Accessories and attachments  
0
2
2
CR  
5
Power cable (2 m)  
For connecting with AC  
adapter 8-pin cable  
( ੬ page 18)  
Remote plug (10-pin)  
REMOTE terminal plug  
( ੬ page 12)  
Battery  
For time and date backup  
( ੬ page 16)  
Ferrite core  
For power cable  
( ੬ page 18)  
Mini screwdriver  
For replacing battery  
( ੬ page 16)  
PC software (2 types)  
• Remote control software  
(For controlling the main unit  
with a PC)  
• SCSI import plug-in software  
(For importing still images to  
a PC)  
For details, see the instructions  
attached with the software.  
( ੬ page 64)  
Instruction book  
Warranty card  
Wire clamp (5 units)  
For clamping rear cables, etc.  
E6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautionary notes for the correct usage of this product  
• Before recording an important event, etc., always check to make sure that this product is  
working properly.  
• We are not liable for any missed recordings caused by malfunction of this unit, etc.  
Ⅵ Phenomena unique to CCD  
• Smearing and blooming  
When using CCD to record a bright light source, a smearing effect may occur running a  
white line parallel to the light source. In addition, a blooming effect may also occur when the  
light source is extremely bright, spreading light to the source surroundings.  
• Line distortion  
Line and patterns may appear distorted when recorded.  
• White dots  
White dots may appear on the screen when operating under high temperatures. Always  
use the product under recommended ambient temperatures.  
Ⅵ Cautionary notes  
• Influence of strong electric waves and magnets  
Screen noise and discoloration may occur when using the product near antennas of radios  
and televisions or near transformers, monitors, etc. with strong magnetic force.  
• Compatible lenses ( ੬ page 17)  
Although the lens mount of this product is a type C mount, take caution as there are restric-  
tions on the lenses that can be used.  
This product is not equipped with a back-focus adjustment feature. Please use a lens  
equipped with the back-focus adjustment feature.  
• Caring of the product (always turn off the power before cleaning)  
Wipe the product with a soft cloth.  
Do not use paint thinner or benzine as it may melt or discolor the surface.  
For stubborn dirt, wipe with a cloth dampened with water-diluted neutral detergent, then  
dry wipe.  
Ⅵ This product is a Type II information processing device (information processing device for use  
in residential areas or nearby areas) conforms to the VCCI (Voluntary Control Council for  
Interference by Information Technology Equipment) standards for the purpose of preventing  
electrical interference in residential areas.  
However, using the product near televisions and radios may cause interference of reception.  
Please read the instructions carefully for the correct usage.  
E7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction (continued)  
Part names and their functions  
[Front and bottom]  
C-MOUNT  
DIGITAL  
CAMERA  
@ @ @ @ @ @  
KY-F70  
^ Lens mount  
a Screw holes for mounting the  
camera (1/4-inch)  
Although the lens mount conforms to the  
type C mount lens, there are restrictions  
on the lenses that can be used.  
Mounting the lens ( ੬ page 17)  
Used when mounting the camera to a fixer  
or rotating platform.  
b Lithium battery case  
_ Camera mounting bracket  
Although the mounting bracket is mounted  
on the bottom of the camera when shipped,  
the bracket can also be mounted on the  
top of the camera.  
Used to case the lithium battery for time  
and date backup. The lithium battery is not  
installed when shipped.  
Please install the attached lithium battery  
(CR2032) before use.  
Mounting the camera ( ੬ page 22)  
Inserting the lithium battery ( ੬ page 16)  
` Locking screws for the camera  
mounting bracket  
(M2.6 × 6mm, 3 units)  
CAUTION  
Always use the attached screws. Using screws  
that exceed 6mm may result in malfunction of  
the unit.  
E8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Rear]  
● While the menu screen is being dis-  
played, press this button selected item  
up.  
While an item is selected, use this but-  
ton to change the set value.  
Setting in the menu screen ( ੬ page 44)  
SCSI  
REC  
MODE  
SET  
SEND AW/SEL  
MENU  
UP  
DOWN  
PLAY  
FREEZE  
e AW/SEL/DOWN button  
● [AW (Auto White)]  
LENS  
MONITOR  
Press this button to adjust the white bal-  
ance when the light source of the sub-  
ject is changed.  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
White balance adjustment ( ੬ page 28)  
● [SEL (Select)]  
SEE INSTRUCTION MANUAL  
Pressing this button each time while in  
the PLAY mode will switch to the previ-  
ous image in memory.  
* The PLAY mode refers to the condition  
which the unit is playing back recorded  
images from the memory.  
c MENU button  
Press this button to output the menu screen  
from the MONITOR terminal.  
Playing back images from memory ( ੬  
page 33)  
Press the button once more to clear the  
menu screen.  
● [DOWN]  
Setting in the menu screen ( ੬ page 44)  
While the menu screen is being dis-  
played, press this button selected item  
down.  
While an item is selected, use this but-  
ton to change the set value.  
Setting in the menu screen ( ੬ page 44)  
d SEND/UP button  
● Press this button to output the same still  
image* that is being outputted to the  
MONITOR terminal to an MO drive or  
printer.  
Save images in memory to an MO disk ( ੬  
page 36)  
Output images in memory to a printer ( ੬  
page 37)  
* A still image refers to an image recorded  
by pressing the FREEZE button while in  
the REC mode or an image being played  
back in the PLAY mode.  
E9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction (continued)  
Part names and their functions (continued)  
[Rear (continued)]  
Ventilation hole  
SCSI  
REC  
MODE  
SET  
SEND AW/SEL  
MENU  
UP  
DOWN  
PLAY  
FREEZE  
@ @ @ @ @ @  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
f MODE/SET button  
g REC display lamp  
● [MODE]  
This lamp lights when in the REC* mode.  
During FREEZE, this display lamp will flash.  
* During the REC mode, camera images  
are outputted to the MONITOR terminal.  
Pressing the FREEZE button at this time  
will save the image to the main unit  
memory.  
Pressing this button each time will switch  
between the REC (record)* and PLAY  
(playback) modes. The default mode  
when the power is turned on is REC.  
* REC mode is the condition which the unit  
has either captured an image or is ready  
to write an image to the main unit memory.  
Recording images to the main unit memory  
( ੬ page 34)  
Playing back images from the memory  
( ੬ page 35)  
● [SET]  
While the menu screen is being displayed,  
use this button to select a submenu or  
confirm a selected item or set value.  
Setting in the menu screen ( ੬ page 44)  
h PLAY display lamp  
This lamp lights when in the PLAY* mode.  
* During the PLAY mode, images saved in  
the main unit memory are played back  
by outputting to the MONITOR terminal.  
Playing back images from the memory ( ੬  
page 35)  
E10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
i FREEZE button  
l POWER display lamp  
This lamp lights when the power of the main  
unit is on.  
While in the REC mode, press this button  
to capture a still image (freeze) of the im-  
ages being outputted through the MONI-  
TOR terminal. At the same time, the still  
image is saved to the main unit memory.  
Pressing this button once more will cancel  
the still image and return to the camera  
images.  
m DC IN power input terminal  
(Mini DIN 8-pin, female)  
Main unit power supply (DC 12V) is sup-  
plied through this terminal.  
For the power supply, use the AA-P700 AC  
adapter.  
Connecting the power ( ੬ page 18)  
Saving images to the main unit memory  
( ੬ page 34)  
n REMOTE terminal  
MEMO  
(Metal 10-pin, female)  
Used to connect external devices such as  
You can also set the unit to automatically can-  
cel the still image after 5 seconds.  
a freeze switch or flash unit.  
FREEZE screen, CANCEL screen ( ੬ page 53)  
5.Various recording methods ( ੬ page 40)  
o Dip switches  
j MONITOR output terminal  
(D-sub 15-pin, female)  
Used to set the SCSI ID ( ੬ page 24) and  
monitor ( ੬ page 24), and output color bar  
( ੬ page 28).  
Used to connect to a VGA monitor or SXGA  
compatible capture board.  
The default setting is set to VGA monitor  
compatible.To change the setting fromVGA  
mode to SXGA mode, change the dip  
switch settings.  
Setting the monitor ( ੬ page 24)  
● When in the SXGA mode, images of  
1360 × 1024 pixles (7.5 frames/sec.) are  
outputted.  
p SCSI terminal  
(Half-pitch 50-pin × 2)  
Used to directly output to an MO drive ( ੬  
page 20) or printer ( ੬ page 21).  
The default setting of the SCSI ID is 7.  
Change the SCSI ID setting when connect-  
ing to a PC, etc.  
Connecting to a PC ( ੬ page 64)  
● For the VGA mode, you can select be-  
tween the FINE mode of 640 × 480 pix-  
els (7.5 frames/sec.) or DRAFT mode of  
640 × 240 pixels (30 frames/sec.) in the  
menu screen.  
Setting the VGA mode ( ੬ page 25)  
k LENS connection terminal  
Used to connect the lens cable.  
Mounting the lens ( ੬ page 17)  
E11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction (continued)  
Explanation of terminals  
Lens terminal (Metal 12-pin, female)  
Power terminal (Mini DIN 8-pin, female)  
10  
7
9
1
8
6
8
2
7
3
3
5
6
4
4
2
11  
12  
1
5
@ @ @ @ @ @  
Pin no.  
Signal name  
Pin no.  
Signal name  
1
2
3
4
5
6
7
8
NC  
1
2
NC  
GND  
NC  
3
GND  
NC  
NC  
4
GND  
12V  
NC  
5
IRIS CONTROL  
6
12V DC  
7
IRIS POSITION  
12V  
8
IRIS AUTO /MANU  
9
NC  
NC  
NC  
NC  
10  
11  
12  
Remoter terminal (Metal 10-pin, female)  
1
8
7
10  
6
2
9
3
5
4
Terminal  
name  
Pin no.  
Signal name  
I/O  
Conditions  
1
2
A. WHITE active Zi=22k Ω  
FREEZE L active Zi=100k Ω  
WEN L active Zo=100 Ω 3V(p-p)  
FREEZE  
IN  
• Contact point  
recommended  
• Rated voltage:  
5.3V  
• H level: 3.5 ~ 5.0V  
• L level: 0 ~ 0.8V  
• CMOS (5V): OK  
• TLL not possible  
• 5V CMOS  
• Schmidt Trigger  
• Pull-up to 5V at  
100k Ω  
• Input capacity  
0.1 µF  
3
4
FLASH  
5
SEND (PRINT)  
RS-SDI  
6
WEN  
OUT  
• Output only when  
in the SXGA mode  
• 3.3V (p-p)  
negative polarity  
7
RS-SDO  
GND  
8
FLASH  
OUT  
• Rated current:  
150mA  
• Rated voltage:  
12V  
• Open collector  
9
12V  
10  
OPERATION  
E12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor terminal (D-sub 15-pin, female) SCSI terminal (Half-pitch 50-pin, female)  
5
1
1
25  
10  
15  
6
50  
26  
11  
Pin no.  
1 ~ 11  
12  
Signal name  
Pin no.  
Signal name  
GND  
GND  
NC  
1
2
R OUT 700mV, 75 Ω  
G OUT 700mV, 75 Ω  
B OUT 700mV, 75 Ω  
13  
3
14  
GND  
4
GND  
15 ~ 25 GND  
5
NC  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
DB 0  
DB 1  
DB 2  
DB 3  
DB 4  
DB 5  
DB 6  
DB 7  
DBP  
GND  
GND  
GND  
6
R GND  
G GND  
B GND  
NC  
7
8
9
10  
11  
12  
13  
GND  
GND  
NC  
Hs (3V(p-p) negative polarity  
Zo=100 Ω)  
Vs (3V(p-p) negative polarity  
14  
15  
Zo=100 Ω)  
NC  
VC +5 (input only)  
GND  
GND  
ATN  
GND  
BSY  
ACK  
RST  
MSG  
SEL  
CD  
REQ  
I/O  
E13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Before recording  
Basic system 1  
While checking the images from the camera on the monitor, output the images to an MO disk or  
printer.  
Connect to the  
power supply  
AA-P700  
AC ADAPTER AA-P700  
POWER  
Connect the monitor  
( ੬ page 19)  
ON  
( ੬ page 18)  
AC  
OFF  
@ @ @ @ @ @  
AC adapter  
MONITOR  
SCSI  
VIDEO IN  
DC IN  
VGA monitor  
Connect the MO drive  
unit ( ੬ page 20)  
MO disk drive  
Mount the lens  
( ੬ page 17)  
CP700DSA MITSUBISHI  
PAPER FEED  
&
CUT  
COPY  
ONLINE  
ALARM SHEET PAPER  
DATA  
Connect the printer  
POWER  
OPEN  
( ੬ page 21)  
Printer  
(recommended: Mitsubishi CP700DSA)  
For the power supply, always use the AA-P700 AC adapter.  
E14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic system 2  
This is a system to record with this camera using a flash timed by an external freeze switch.  
AA-P700  
AC ADAPTER AA-P700  
POWER  
ON  
AC  
OFF  
AC adapter  
MONITOR  
SCSI  
REMOTE  
REMOTE  
DC IN  
VGA monitor  
MO disk drive  
Model name  
Microscope  
CP700DSA MITSUBISHI  
PAPER FEED  
&
CUT  
COPY  
ONLINE  
adapter  
ALARM SHEET PAPER  
DATA  
POWER  
OPEN  
Printer  
Flash  
Freeze switch  
CAUTION  
Use a 1/2 inch mount microscope adapter.  
4mm or less  
Lens  
To avoid damage to the unit, always use an adapter that is 4mm or less from  
the lens mount side.  
E15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Before recording (continued)  
Inserting the lithium battery  
The lithium battery is used to back up the time and date data.  
Install the lithium battery before using the unit.  
Mini screwdriver (attached)  
<
>
Install  
Screws  
1.  
Battery compartment  
@ @ @ @ @ @  
D I G I T A L  
C A M E R A  
K Y - F 7 0  
C - M O U N T  
Remove the screws (2 units) using the attached mini screw-  
driver, then open the cover.  
2.  
Completely insert the lithium battery in the direction of the ar-  
row with the + side facing up.  
3.  
Make sure that the battery is securely in position by the hold-  
ers as shown in the diagram.  
Holders  
(To remove the battery, follow the procedure in reverse.)  
4. Replace the cover and retighten the screws.  
MEMO  
The time and date will not be displayed correctly when the battery is not installed. When replacing the  
lithium battery, reset the time and date.  
Setting the time and date ( ੬ page 26)  
E16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting the lens  
Follow the procedure shown below when mounting an auto-iris lens. For further details, see the  
instruction manual of the lens.  
Camera head  
Male  
3.  
Thread section  
Mount clamp ring  
Lens  
KY-F70  
CAMERA  
DIGITAL  
C-MOUNT  
2.  
Female  
Lens remote control  
1. Remove the lens mount cap. At this time, take caution so that dust do not enter inside the  
mount.  
2. To mount the lens, lightly press the thread section of the lens mount onto the thread section  
of the main unit, then turn the mount clamp ring slowly clockwise until it is securely tight-  
ened.  
MEMO  
To change the position of the lens rotation:  
~ First, turn the mount clamp ring counterclockwise (1/4 turns) with the lens facing you.  
Ä Slowly turn the lens and after adjusting the position, retighten the mount clamp ring.  
3. Insert the camera cable of the lens into the lens connection terminal on the rear of the main  
unit, then securely fasten.  
The iris control is made automatically from the camera.  
* When using a manual iris lens, set the IRIS MODE to MANUAL (see ੬ page 48).  
4. When using the lens remote control, connect the lens control cable (female) to the remote  
control.  
CAUTION  
4mm or less  
Lens is not included with this unit.  
To avoid damaging the main unit, make sure that the lens mount of the lens to be  
used is 4mm or less.  
Lens  
E17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Before recording (continued)  
Connecting the power  
Connect the DC IN terminal on the rear of the main unit and the TO CAMERA terminal of the AC  
adapter (AA-P700) with the attached power supply cable (2m).  
SCSI  
REC  
SEND AW/SEL MODE  
AA-P700  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
DC 12V=OUTPUT  
VIDEO OUTPUT  
@ @ @ @ @ @  
AC 100V  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
S(Y/C) OUTPUT  
TO CAMERA  
POWER  
1
2
3
4
EITHER  
OUTPUT  
MAX 1.25A  
SEE INST-  
RUCTION  
MANUAL  
SEE INSTRUCTION MANUAL  
AC adapter  
AC  
Clamp filter  
Attached power supply cable  
Before connecting, make sure that the power switch of the AA-P700 is set to OFF. Connecting  
with the power turned on may result in malfunction.  
DC IN  
After inserting the plug completely, securely fasten by  
turning the ring.  
POWER  
POWER  
POWER  
Ring  
Plug  
To reduce emission of unwanted electrical waves, mount  
the attached ferrite core as shown in the diagram on  
the left.  
DC IN  
Mount the ferrite core as close to the main unit as pos-  
sible as shown in the diagram.  
DC IN  
Connect the plug to the AC adapter side in the same  
manner.  
E18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a monitor  
Connect the PC monitor (VGA) to the MONITOR terminal on the rear of the main unit.  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
MONITOR terminal  
● Before connecting, make sure that the power of all systems are turned off. Connecting with the  
power turned on may result in malfunction.  
● For the connector, commercially available VGA video cable is recommended.  
● For the pin assignment, see page 13 Explanation of terminals  
E19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Before recording (continued)  
Connecting an MO drive unit  
It is possible to output image data stored in the main unit memory to an MO drive unit. ( ੬ Page  
36 Saving images from the memory to an MO disk)  
Dip switches  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
@ @ @ @ @ @  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
SCSI terminal  
To directly connect the MO drive to the main unit, set the dip switches on the rear of the main unit  
as shown below.  
ON 1 2 3 4  
Do not set the ID of the MO drive side to other than  
7.  
(SCSI : 7)  
MEMO  
• The image data outputted to an MO drive will be 1360 × 1024 pixels, regardless whether the monitor  
in use is VGA or SXGA, or whether the VGA mode is set to FINE or DRAFT.  
• The maximum allowed length of the SCSI cable is 3m.  
• When connecting an MO drive to a PC, separate setting of the SCSI ID is required.  
( ੬ Page 64 7. Connecting to a PC)  
• It is not possible to simultaneously output the image data to a printer and MO drive.  
E20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a printer  
It is possible to directly output image data stored in the main unit memory to a printer. ( ੬ page  
37 Outputting images from the memory to a printer)  
Dip switches  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
LENS  
CP700DSA MITSUBISHI  
MONITOR  
PAPER FEED  
&
CUT  
COPY  
ONLINE  
ALARM SHEET PAPER  
DATA  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
POWER  
OPEN  
SEE INSTRUCTION MANUAL  
SCSI terminal  
When directly connecting the main unit to a printer, set the dip switches on the rear of the main  
unit as shown below.  
ON 1 2 3 4  
Set the ID of the printer side to other than 7.  
(SCSI : 7)  
MEMO  
• The image data outputted to a printer will be 1360 × 1024 pixels, regardless whether the monitor in  
use is VGA or SXGA, or whether the VGA mode is set to FINE or DRAFT.  
• The maximum allowed length of the SCSI cable is 3m.  
• When connecting an MO drive to a PC, separate setting of the SCSI ID is required.  
( ੬ Page 64 7. Connecting to a PC)  
• It is not possible to simultaneously output the image data to a printer and MO drive.  
E21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Before recording (continued)  
Mounting the camera  
<
>
Mounting method  
Camera mounting screw hole  
Rotation prevention hole  
@ @ @ @ @ @  
Camera mounting bracket  
● When mounting the camera, use the camera mount screw hole located on the camera mount-  
ing bracket.  
● When mounting the camera, use the rotation prevention hole to prevent the unit from falling  
and securely mount the unit.  
<
>
Changing the camera mounting bracket position  
When shipped, the camera mounting bracket  
is mounted on the bottom of the unit.To mount  
it on the top of the unit, simply remove the 3  
locking screws holding the camera mounting  
bracket.  
C-MOUNT  
DIGITAL  
CAMER
KY-F70  
CAUTION  
Always use the screws mounted on the main  
unit. Using screws that exceed 6mm in length  
may result in damage to the unit.  
E22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fall prevention  
Fall prevention  
wire chain  
6mm  
Camera head  
KY-F70  
CAMERA  
DIGITAL  
C-MOUNT  
Notes  
● Special attention is required when mounting the unit to the wall or ceiling.  
Rather than attempting to do it yourself, request a qualified person to  
perform such installation. Falling of the unit may result in bodily injury.  
● To prevent the unit from falling, connect the unit to a strong surface with a  
wire chain, etc.When connecting such chain, use the bracket locking screw  
hole on the side which the camera mounting bracket is not mounted.  
(M2.6 × 6mm)  
Take special caution to the length of the wire as well.  
E23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Settings and adjustments for recording  
Setting the dip switches  
The type of PC monitor to use and the ID during SCSI connection are set using the dip switches.  
SCSI  
REC  
SEND AW/SEL MODE  
MEMO  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
Turn the power off before setting the dip switches. Setting  
the switches with the power on will not change the set-  
tings.  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
Dip switches  
SEE INSTRUCTION MANUAL  
@ @ @ @ @ @  
Monitor settings  
Dip switch no. 3 is set depending on whether the PC monitor being used is a VGA monitor or a  
<
>
SXGA monitor. Default setting: OFF  
ON 1 2 3 4  
VGA output terminal  
Set when directly connecting a VGA monitor to the MONITOR ter-  
minal on the rear of the main unit.  
Set to OFF  
SXGA output setting  
Set for systems using a SXGA monitor.  
ON 1 2 3 4  
The signal from the MONITOR terminal on the rear of the main unit  
is inputted through the analog input compatible video capture board.  
( ੬ Page 65 Compatible systems 2)  
Set to ON  
SCSI ID settings  
<
>
Sid switches 1 and 2 are set depending on the used system to set the SCSI ID. Default ID: 7  
Set when connecting a printer or MO drive directly to the main unit.  
When making this setting, the main unit will become the host (ini-  
tiator).  
ON  
1
2
3
4
ID=7  
ID=6  
ON  
ON  
ON  
1
1
1
2
2
2
3
3
3
4
4
4
Set when exporting images to a PC.  
Make sure that the ID numbers of the connecting devices are not  
the same.  
When making this setting, the PC will become the host (initiator)  
and the main unit will become the target.  
( ੬ Page 64 Connecting to a PC)  
ID=5  
ID=4  
E24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu settings  
VGA mode and lens settings are made from the menu screen.  
VGA mode settings  
Set whether to output semi-animation (7.5 frame/sec.) of 640 × 480 pixels or full-motion video  
(30 frames/sec.) of 640 × 240 pixels to the connected VGA monitor.  
- - - SYSTEM SETT I NG - - -  
Set MONITOR in the SYSTEM SETTING screen.  
ON SCREEN  
FRZ D I SPLAY : O  
:
MEMORY NUM  
N
FINE:  
Semi-animation (7.5 frames/sec.) of 640 × 480  
SEND PR I OR ITY : MO  
pixels  
MON I TOR  
BAR LEVEL  
NEGA  
: F I NE  
: 0.7V  
: OFF  
DRAFT: Full-motion video (30 frames/sec. of 640 × 240  
. .  
MENU RESET  
pixels  
V I DEO MEMOR CLEAR . .  
Y
T I ME ADJUST  
(Default setting: DRAFT)  
MEMO  
This menu item will be displayed with ———— when set to the SXGA mode by the rear dip switches,  
disabling changes.  
Lens settings  
Set whether the used lens is an auto-iris lens or a manual lens.  
- - - EXPOSURE - - -  
Set IRIS MODE in the EXPOSURE screen.  
I R I S MODE  
AE LEVEL  
I R I S LEVEL  
I R I S DETECT  
I R I S AREA  
SHUTTER  
: AUTO  
: 0  
: 12 8  
: NORMAL  
: FULL  
: STEP  
: 1 / 8  
AUTO: Set when using an auto-iris lens  
MANU: Set when using a manual lens or no lens.  
(Default setting: AUTO)  
SPEED  
SENCET I V I TY  
LEVEL  
: STEP  
: I SO1 0 0  
ALC MAX  
: I SO4 0 0  
E25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Settings and adjustments for recording (continued)  
Time and date settings  
MENU DOWN  
1. Press the MODE button to enter the PLAY mode (PLAY  
LED on), then press the MENU button.The PLAY menu  
screen will be outputted through the MONITOR termi-  
nal.  
UP MODE/SET  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY  
PLAY  
FREEZE  
2. Press either the UP or DOWN button and select TIME  
ADJUST (when selected, the TIME ADJUST display will  
become purple). Next, press the SET button to display  
the TIME ADJUST screen.  
LENS  
MONITOR  
@ @ @ @ @ @  
REMOTE  
DC IN  
POWER  
ON  
1
2
3
4
(The TIME ADJUST screen can also be displayed by  
selecting TIME ADJUST in the SYSTEM SETTING  
screen of the REC mode.)  
SEE INSTRUCTION MANUAL  
3. The year will be displayed in purple to indicate that it  
can be changed. Press the UP or DOWN button to set  
the year.  
- - - SYSTEM MENU - - -  
ON SCREEN  
:
MEMORY NU  
M
SEND PR I OR ITY : MO  
BAR LEVEL  
: 0.7V  
MENU RESET . .  
V I DEO MEMORY CLEAR . .  
T I ME ADJUST .  
.
4. When the year setting is completed, press the SET but-  
ton. The year display will return to white and the month  
will be displayed in purple to indicate that it can be  
changed. In the same manner as above, press the UP  
or DOWN button to set the month.  
PLAY menu screen  
5. Set the day, hour and minute in the same manner. The  
seconds display will display 00.The clock will start when  
the 00 is displayed in purple and the SET button is  
pressed. Press the SET button when the actual time  
reaches 00 seconds.  
- - - T I ME ADJUST - - -  
ADJUST T I ME  
1 9 9 9 / 1 2 / 3 1 2 3 : 5 9 : 0 0  
ADJUST [ UP ] [ DOWN ]  
SET  
•
[ SET ]  
EX I T  
[ MENU ]  
TIME ADJUST screen  
E26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. OK will be displayed for approximately 3 seconds and  
- - - T I ME ADJUST - - -  
the unit will return to the menu screen.  
O
K
OK display screen  
MEMO  
When setting the time and date, always set the seconds (00).  
Pressing the MENU button before setting the seconds will not change the set values.  
E27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Settings and adjustments for recording (continued)  
Monitor adjustment  
The color contrast, brightness, etc. are adjusted by sending built-in color bar signals of the main  
unit to the PC monitor.  
MONITOR terminal  
1. Depending on the system, set the MONITOR mode to  
VGA or SXGA.  
SCSI  
(Set using the main unit dip switches)  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
Monitor settings ( ੬ page 24)  
PLAY  
FREEZE  
@ @ @ @ @ @  
LENS  
MONITOR  
2. Connect the monitor and MONITOR terminal.  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
3. Set dip switches 3 and 4 on the rear of the main unit to  
SEE INSTRUCTION MANUAL  
ON.  
ON 1 2 3 4  
Dip switches  
MEMO  
Turn the power off before setting the dip switches. Setting the  
switches with the power on will not change the settings.  
4. Turn the main unit power on.  
5. Adjust the video monitor.  
MEMO  
• For the adjustment method, see the instruction manual of  
the video monitor.  
• The peak level of the color bar is et to 0.7V. To change the  
setting to 0.58V, select BAR LEVEL in the SYSTEM SET-  
TING screen ( ੬ Page 58).  
6. When completed, turn off the system power., then set  
dip switch 4 to OFF.  
E28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Focus adjustment  
This unit is not equipped with a back-focus feature. Adjust the back focus using the lens.  
Male  
KY-F70  
CAMERA  
DIGITAL  
Focus ring  
C-MOUNT  
Female  
The default setting of the main unit shutter speed is 1/8.  
When difficult to focus, change the shutter speed to 1/30  
using the procedure given below.  
1. Press the MODE button to enter the REC mode (REC  
LED on). Next, lightly press the MENU button to display  
the REC mode quick menu screen.  
Shutter speed  
- - - REC MENU ( QU I CK ) - - -  
0
1 2 8  
: STEP  
: 1 / 30  
: STEP  
AE LEVEL  
I R I S LEVEL  
SHUTERE  
SPEED  
SENS I T I V I TY  
:
:
2. Press the DOWN and SET buttons to change SHUT-  
TER to STEP.  
LEVEL  
ALC MAX  
SEND PRIORITY: MO  
: I SO1 0 0  
: I SO4 0 0  
3. Press the DOWN button to select SHUTTER SPEED,  
then press the SET button.  
1/8 will be displayed in purple, indicating that it can be  
changed.  
REC mode quick menu screen  
4. Press the UP or DOWN button to change the value to  
1/30, then press the SET button. When confirmed, the  
set value of 1/30 will be displayed in white.  
MEMO  
At this time, pressing the MENU button without pressing the  
SET button will not confirm the set value and the unit will re-  
turn to the setting prior to the change.  
5. Press the MENU button to return to the normal screen.  
E29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Settings and adjustments for recording (continued)  
White balance adjustment  
Since the color of light (light temperature) changes depending on the light source, readjust the  
white balance (AUTO WHITE) when the light source of the object changes.  
MENU DOWN  
1. Press the MODE button to enter the REC mode (REC  
UP MODE/SET  
LED on), then press and hold the MENU button for at  
least 2 seconds to display the REC MENU screen.  
SCSI  
REC  
(If the button is pressed for less than 2 seconds, the  
REC mode quick menu will appear. ੬ Page 47)  
SEND AW/SEL MODE  
REC LED  
@ @ @ @ @ @  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
LENS  
MONITOR  
2. Press the DOWN button, select 2. WHITE BALANCE  
(the text will be displayed in purple when selected), then  
press the SET button.  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
The WHITE BALANCE screen will appear.  
3. Press the UP or DOWN button to select COLOR TEMP  
(the text will be displayed in purple when selected), then  
press the SET button.  
- - - REC MENU - - -  
1 : EXPOSURE . .  
The set value will be displayed in purple, indicating that  
it can be changed.  
2 :WH I TE BALANCE . .  
3 : FREEZE . .  
4 : PROCESS . .  
5 : SYSTEM SETT I NG . .  
4. Press the UP or DOWN button to select the setting de-  
pending on the usage environment.  
3200K: when using low temperature lighting such as a  
halogen lamp, etc.  
REC MENU screen  
5200K: when using high temperature lighting such as  
the sun, etc.  
Menu item Set value  
Pressing the SET button will register the setting in the  
main unit memory.  
- - -WHI TE BALANCE - - -  
COLOR TEMP  
WH I T E BA L  
LEVEL ( R )  
:
3 2 0 0K  
: AUTO  
: 0  
MEMO  
: 0  
LEVEL ( B )  
: OFF  
SHAND I NG MODE  
LEVEL ( R )  
LEVEL ( G )  
Pressing the MENU button without pressing the SET button  
will not register the set value and the unit will return to the  
setting prior to the change.  
:
:
:
LEVEL ( B )  
5. Press the UP/DOWN and SET buttons to set WHITE  
WHITE BALANCE screen  
BAL in the WHITE BALANCE screen to AUTO.  
E30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. After pressing the MENU button twice to return to the  
normal screen, place a white object with the same light-  
ing conditions as the object to record, then zoom in to  
display white on the screen.  
AW  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
LENS  
MONITOR  
7. Press the AW (Auto White) button.  
● When auto white is in operation, OPERATION will be  
displayed on the monitor screen.  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
● When the white balance is successfully set, OK will  
appear on the screen and the unit will return to the  
normal screen.  
SEE INSTRUCTION MANUAL  
MEMO  
When setting the VGA mode to FINE, using the SXGA mode  
or setting the unit to a slow shutter speed, the white balance  
operation may take some time before completion.  
AUTO WH I TE  
O PERAT I O N  
● Error display  
When the auto white balance cannot be set, one of  
the following error messages will appear and the unit  
will return to the normal screen.  
Auto white in operation  
NG: OBJECT (bad object)  
Displayed when the object consists of little whiteness  
or when the color temperature is not correct.  
Change to a white object and redo the white balance.  
AUTO WH I TE  
O
K
ERROR: LOW LIGHT (shortage of light)  
Displayed when the lighting is too dark. Brighten the  
lighting and redo the white balance.  
Auto white operation completed  
ERROR: OVER LIGHT (excessive light)  
• Displayed when the lighting is too bright. Lower the  
brightness and redo the white balance.  
• If the color temperature of the object changes when  
darkening the lighting, redo the white balance after  
pressing the AW button on the panel.  
E31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Settings and adjustments for recording (continued)  
White shading adjustment  
Even if the white balance is successfully achieved in the center of the screen, there may be  
times when white balance cannot be achieved at the top and bottom of the screen, resulting in  
the color of green and magenta becoming discolored.This is due to the characteristic of the lens  
and the adjustment of this is called the white shading adjustment.  
Perform the following after adjusting the white balance.  
MENU DOWN  
@ @ @ @ @ @  
SET  
1. Press the MODE button to enter the REC mode (REC  
LED on), then press and hold the MENU button for at  
SCSI  
least 2 seconds to display the REC MENU screen.  
(If the button is pressed for less than 2 seconds, the  
REC  
SEND AW/SEL MODE  
REC LED  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
REC mode quick menu will appear. ੬ Page 38)  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
2. Press the DOWN button, select 2. WHITE BALANCE  
(the text will be displayed in purple when selected), then  
press the SET button.  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
The WHITE BALANCE screen will appear.  
3. Press the UP/DOWN and SET buttons to set SHAD-  
ING MODE in the WHITE BALANCE screen to ADJUST.  
The set value will be displayed in purple, indicating that  
it can be adjusted.  
- - -REC MENU - - -  
1 : EXPOSURE . .  
2 :WH I TE BALANCE . .  
3 : FREEZE . .  
4 : PROCESS . .  
5 : SYSTEM SETT I NG . .  
REC MENU screen  
E32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. While watching the monitor screen, change LEVEL (R),  
LEVEL (G) and LEEL (B) using the UP and DOWN  
buttons.  
- - - WHI TE BALANCE - - -  
COLOR TEMP  
:
3 2 0 0K  
WH I T E BA L  
LEVEL ( R )  
: AUTO  
: 0  
For each item, the color at the bottom weakens and the  
color at the top strengthens as the number becomes  
larger  
: 0  
LEVEL ( B )  
: ADJUST  
SHAND I NG MODE  
LEVEL ( R )  
LEVEL ( G )  
: 0  
: 0  
: 0  
LEVEL ( B )  
<
>
Variable range: –128 ~ 127  
5. When the adjustments of all channels (R, G and B chan-  
WHITE BALANCE screen  
nels) are completed, redo the white balance adjustment.  
E33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic operations  
Recording images to the main unit memory  
The main unit is capable of storing 5 images in the VGA mode and 4 images in the SXGA mode  
to the main unit memory.  
Exceeding the maximum number of images stored will replace the oldest image with the latest.  
1. Press the MODE button to enter the REC mode.  
MODE  
The REC LED will light.  
SCSI  
REC  
MEMO  
SEND AW/SEL MODE  
@ @ @ @ @ @  
REC LED  
MENU  
UP  
DOWN  
SET  
The unit will automatically enter the REC mode when the power  
is turned on.  
PLAY  
FREEZE  
FREEZE  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
2. Press the FREEZE button.  
POWER  
1
2
3
4
Images outputted through the MONITOR terminal will  
become a still image and stored in the main unit memory.  
In addition, the REC LED will flash.  
SEE INSTRUCTION MANUAL  
At this time, FREEZE will appear in the screen. To dis-  
able the message from appearing, set FRZ DISPLAY  
to OFF ( ੬ page 57).  
MEMO  
The character display contents of the monitor screen can be  
changed by selecting ON SCREEN in the SYSTEM SETTING  
screen. ( ੬ Page 57)  
FREE ZE  
3. Cancel FREEZE  
Press the FREEZE button once more to cancel the still  
image.  
FREEZE display  
MEMO  
It is possible to set the unit so that the still image is automati-  
cally cancelled after 5 seconds. Set CANCEL in the FREEZE  
screen to AUTO. ( ੬ Page 53)  
4. Output the image to an MO drive or printer, as neces-  
sary.  
( ੬ Pages 36 and 37)  
CAUTION  
Images stored in memory will be deleted when the power is turned off.  
E34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing back images from the memory  
It is possible to play back images stored in the main unit memory. When in the VGA mode,  
images will be displayed in 640 × 480 pixels, regardless of whether in the FINE or DRAFT mode.  
1. Press the MODE button to enter the PLAY mode.  
SEL  
The PLAY LED will light and the latest image stored will  
MODE  
be displayed on the monitor.  
● At this time, the memory image no. will be displayed  
SCSI  
REC  
SEND AW/SEL MODE  
at the bottom right of the screen.  
MENU  
UP  
DOWN  
SET  
PLAY LED  
PLAY  
FREEZE  
MEMO  
LENS  
MONITOR  
The character display contents of the monitor screen can be  
changed by selecting ON SCREEN in the SYSTEM SETTING  
screen. ( ੬ Page 57)  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
2. Pressing the SEL button each time will switch the from  
latest image to the others recorded previously in order.  
3. Images for playback can also be outputted to an MO  
drive or printer ( ੬ pages 36 and 37).  
Returning to the REC mode  
To return to the REC mode when displaying images, press  
the MODE button to light the REC LED.  
MODE  
SCSI  
REC  
SEND AW/SEL MODE  
REC LED  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
E35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic operations (continued)  
Saving images from the memory to an MO disk  
It is possible to save images stored in the main unit memory to an MO drive connected via the  
SCSI terminal when in the FREEZE or PLAY mode.  
(To output to an MO drive connected to a PC, see Page 64 7. Connecting to a PC)  
Ⅵ
Set to either the FREEZE or PLAY mode.  
SEND  
MODE  
MENU  
1. Check to make sure that dip switches 1 and 2 are set to  
OFF as shown in the diagram on the left.  
@ @ @ @ @ @  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
2. Press the SEND button. WRITE TO MO OK? message  
will appear on the monitor connected to the MONITOR  
terminal.  
PLAY  
FREEZE  
SCSI  
terminal  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
ON  
1
2
3
4
1
2
3
4
3. To write to the MO, press the MODE button (to cancel,  
press the MENU button).While in operation, WRITE TO  
MO OPERATION will appear for approximately 3 sec-  
onds.  
SEE INSTRUCTION MANUAL  
Undefined  
Dip switches  
4. When data is successfully written to the MO, WRITE  
TO MO OK FILE NAME: F70ⅪⅪⅪⅪ.TIF will appear for  
approximately 3 seconds. (each Ⅺ indicates a number)  
WR I T E TO MO  
OK?  
: "MODE "  
OK  
CANCEL: "MENU "  
5. When data is not successfully written to the MO, one of  
the following error messages will appear for approxi-  
mately 3 seconds.  
ERROR : SCSI (check the cable)  
ERROR : WRITE (write error)  
ERROR : FORMAT (format the disk)  
ERROR : DISK (bad MO disk)  
WR I T E TO MO  
OPERAT I ON  
ERROR : DIRECTRY (directory error)  
ERROR : READ (read error)  
ERROR : MO (Other MO disk error)  
WR I T E TO MO  
O
K
F I LE NAME : F70 000 1.T I F  
E36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Outputting images from the memory to a printer  
Use a printer with an SCSI input terminal.  
It is possible to directly output images stored in the main unit memory to a printer connected via  
the SCSI terminal when in the FREEZE or PLAY mode.  
(To output to a printer connected to a PC, see Page 64 7. Connecting to a PC)  
Ⅵ
Set to either the FREEZE or PLAY mode.  
1. Check to make sure that dip switches 1 and 2 are set to  
OFF as shown in the diagram on the left ( ੬ page 36).  
PR I NT  
OK?  
OK  
: "MODE "  
CANCEL: "MENU "  
2. Press the SEND button. PRINT OK? message will ap-  
pear on the monitor connected to the MONITOR termi-  
nal.  
3. To print, press the MODE button (to cancel, press the  
MENU button).  
PR I NT OUT  
I ON  
While in data is being written, PRINT OUT OPERATION  
will appear for approximately 3 seconds.  
A
OPER  
T
4. When data is successfully outputted to the printer,  
PRINT OUT will appear for approximately 3 seconds.  
5. When data is not successfully outputted to the printer,  
one of the following error messages will appear for ap-  
proximately 3 seconds.  
PR I NT OUT  
ERROR : SCSI (check the cable)  
O
K
ERROR : PRINTER (printer error)  
MEMO  
• Set the SCSI ID of the MO drive or printer to other than 7.  
• IF both MO drive and printer are connected to the SCSI terminal, select which source to output to by  
selecting SEND PRIORITY in the SYSTEM SETTING screen ( ੬ Page 57; default setting: MO).  
• Do not connect devices other than printers and MO drives to the SCSI terminal since correct output  
will not be achieved. In addition, only one output device may be connected per one unit.  
E37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic operations (continued)  
Clearing images from the memory  
This function will clear all images stored in the main unit memory.  
MENU DOWN  
1. Press the MODE button to enter the PLAY mode (PLAY  
UP MODE/SET  
LED on), then press the MENU button to display the  
MENU screen.  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY LED  
PLAY  
FREEZE  
@ @ @ @ @ @  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
2. Press the DOWN button , select VIDEO MEMORY  
CLEAR (displayed in purple when selected), then press  
the SET button to display the VIDEO MEMORY CLEAR  
screen.  
- - - P- LAY / FREEZE MENU - - -  
ON SCREEN  
SEND PR I OR I T : MO  
:
MEMORY NUM  
BAR LEVEL  
: 0.7V  
MENU RESET . .  
V I DEO MEMORY CLEAR . .  
T I ME ADJUST . .  
(The same screen can also be displayed by selecting 5.  
SYSTEM SETTING in the REC menu then selecting  
VIDEO MEMORY CLEAR.)  
PLAY mode menu screen  
V I DEO MEMORY C LEAR  
OK?  
OK  
: [ SET ]  
CANCEL: [ MENU ]  
VIDEO MEMORY CLEAR screen  
SET button  
3. Press the SET button to clear all images stored in the  
internal memory. During operation, VIDEO MEMORY  
CLEAR OPERATION will be displayed.  
V I DEO MEMORY C LEAR  
A
I ON  
OPER  
T
MEMO  
To cancel, press the MENU button to return to the MENU screen  
without clearing the images.  
Clearing memory  
E38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. When completed, VIDEO MEMORY CLEAR OK will ap-  
pear for approximately 3 seconds and the unit will re-  
turn to the MENU screen.  
V I DEO MEMORY C LEAR  
O
K
MEMO  
After clearing the entire memory in the PLAY mode, the unit  
will automatically enter the REC mode since no images will be  
available for playback.  
Memory cleared  
5. Press the MENU button once more to return to the nor-  
mal screen.  
E39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Various recording methods  
Recording a PC monitor  
Horizontal line noise will appear on the screen when attempting to record images on a PC  
monitor or display. To clear this noise, the main unit shutter speed must be adjusted with scan  
speed of the monitor.  
1. Press the MODE button to enter the REC mode (REC  
LED on), then lightly press the MENU button to display  
the REC quick menu screen.  
2. Press the DOWN button to select SHUTTER, then press  
Bar  
SET (SHUTTER will be displayed in purple).  
3. Use the DOWN button to change the set value to V.  
SCAN, then press the SET button (SHUTTER will re-  
turn to white).  
PC monitor  
4. Next, press the DOWN button to select SHUTTER  
SPEED, then press the SET button.  
- - - REC MENU ( QU I CK ) - - -  
5. Press either UP or DOWN to change the shutter speed.  
When a black bar can be seen on the screen:  
decrease the shutter speed by pressing the DOWN  
button.  
AE LEVEL  
0
1 2 8  
: V.SCAN  
: 1  
:
:
I R I S LEVEL  
SHUTERE  
SPEED  
/
0
3
: S TEP  
SENS I T I V I TY  
LEVEL  
ALC MAX  
I
I
:
:
S O1 0 0  
S O4 0 0  
When a white bar can be seen on the screen:  
increase the shutter speed by pressing the UP button.  
SEND PRIO RITY: MO  
REC quick menu screen  
6. Press the SET button when the bar is at its minimum.  
MEMO  
At this time, pressing the MENU button will return the unit to its  
previous settings without confirming the changes.  
7. Press the MENU button to return to the normal screen.  
MEMO  
• The vertical scan frequency differs depending on the PC type and the bar may not be completely  
cleared away. The frequency may also change depending on the software used.  
E40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Outputting negative images  
It is possible to change the video signal outputted through the MONITOR terminal of this unit as  
negative video.  
1. Press the MODE button to enter the REC mode (REC  
MENU DOWN  
LED on), then press the MENU button to display the  
UP MODE/SET  
REC MENU screen.  
SCSI  
REC  
SEND AW/SEL MODE  
REC LED  
2. Use the DOWN button to select 5. SYSTEM SETTING  
MENU  
UP  
DOWN  
SET  
PLAY  
FREEZE  
(displayed in purple when selected), then press the SET  
button.  
LENS  
MONITOR  
The SYSTEM SETTING screen will appear.  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
3. Press the DOWN button to select NEGA (NEGA will be  
displayed in purple when selected), then press the SET  
button.  
SEE INSTRUCTION MANUAL  
MONITOR terminal  
The set value will be displayed in purple, indicating that  
it can be changed.  
- - - REC MENU - - -  
1 : EXPOSURE . .  
2 :WH I TE BALANCE . .  
3 : FREEZE . .  
4 : PROCESS . .  
4. Press the DOWN button to set the value to ON.  
The output video will be negative video.  
5 : SYSTEM SETT I NG . .  
REC MENU screen  
Set value  
Menu item  
- - - SYSTEM SETT I NG - - -  
ON SCREEN  
FRZ D I SPLAY : O  
:
OFF  
N
SEND PRI ORITY : MO  
MON I TO R  
BAR LEVEL  
NEGA  
: F I NE  
: 0.7V  
: ON  
. .  
MENU RESET  
V I DEO MEMOR CLEAR . .  
Y
T I ME ADJUST  
SYSTEM SETTING screen  
E41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Various recording methods (continued)  
Synchronizing flash and FREEZE  
To activate the flash when inputting FREEZE, use the REMOTE terminal.  
The REMOTE terminal located in the rear is also used to freeze an image using an external  
device other than the FREEZE button on the rear of the main unit.  
Explanation of terminals ( ੬ page 12)  
● In response to FREEZE input, KY-F70 outputs a flash signal for the CCD accumulation period  
of the next frame.  
● @The@tim@e re@qui@red@for flash output from FREEZE input depends on the timing of the FREEZE  
input and shutter speed. In addition, the pulse length of the flash output differs depending on  
the shutter speed.  
● The slow shutter will also be used when the unit is in the SXGA mode or FINE mode of the  
VGA mode with shutter speed of 1/7.5 sec. or slower, or when in the DRAFT mode of the VGA  
mode with shutter speed of 1/30 sec. or slower.  
● Since the above diagram is the timing chart when in the SXGA mode, CCD OUT and ANA-  
LOG OUT are synchronous. However, the timing of ANALOG OUT will be asynchronous with  
CCD OUT when in the VGA mode and there will also be no WEN output.  
● When in the VGA mode, FREEZE input is ignored until the FREEZE screen is completely  
displayed on the monitor.  
● Even for the SXGA mode, FREEZE input for continuous frames are not recognized and FREEZE  
input interval for high speed shutters also require a minimum of 2 frames (270ms).  
● When the FREEZE cancel mode is set to MANUAL, the FREEZE input for FREEZE cancella-  
tion will not output a FLASH signal or WEN.  
Timing chart (SXGA mode)  
FREEZE  
VD  
(Internal)  
EXP  
(CCD accumulation period)  
FLASH  
CCD  
OUT  
ANALOG  
OUT  
WEN  
a. High speed shutter only  
FREEZE  
VD  
(Internal)  
EXP  
(CCD accumulation period)  
FLASH  
CCD  
OUT  
ANALOG  
OUT  
WEN  
b. Combined with slow shutter  
E42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About ALC and EEI operations  
ALC refers to Automatic Level Control and EEI refers to shutter iris control.  
The Automatic Level Control (ALC) operates under dark lighting and the electronic shutter (EEI)  
operates under bright lighting. Furthermore, setting the IRIS mode to AUTO will synchronize  
sensitivity, iris and electronic shutter and appropriate signal level can be acquired automatically  
at all times.  
The ALC mode increases sensitivity from 0dB (ISO100) to +12dB (ISO400) under dark lighting  
and the EEI mode automatically adjusts the electronic shutter within the range of 1/7.5 to 1/  
255.1 (calculated value) when in FINE under bright lighting (1/30.2 to 1/255.1 for DRAFT). In  
other words, the signal level is adjusted in the range of 2 graduations of the aperture under dark  
lighting and 5 graduations when in FINE under bright lighting. When the iris is set to manual, the  
sensitivity and electronic shutter are continuously changed without changing the iris setting.  
This feature holds the advantage of being able to record under changing light conditions without  
changing the depth of field.  
Operational range  
Light 1×  
16  
32 62.5 125  
-
-
-
250 500 1000 2000 4000 8000 16000 32000  
FINE  
ALC  
EEI  
1/15 1/30 1/60 1/120 1/240  
ISO400 ISO200  
F1.4  
F2  
F2.8  
F4  
F5.6  
F8  
F11 F16  
DRAFT  
ALC  
EEI  
1/60 1/120 1/240  
ISO400 ISO200  
F1.4  
F2  
F2.8  
F4  
F5.6  
F8  
F11 F12  
E43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings  
Menu screen flow  
There are 3 types of menu screens: PLAY menu screen, REC quick menu screen and REC  
normal menu screen.  
MEMO  
• Pressing the MENU button while in any of the menu  
screens will return the unit to the previous screen.  
Normal screen  
• Press the MENU button for more than 2 seconds while in  
Lightly press the  
the REC mode will display not the REC quick menu but  
the REC normal menu screen.  
MENU button (less  
@ @ @ @ @ @  
than 2 seconds)  
while in the REC  
mode.  
• The MENU RESET screen, MEMORY CLEAR screen,  
TIME ADJUST screen can all be accessed from the PLAY  
menu screen of REC normal menu screen.  
- - -REC MENU ( QU I CK ) - - -  
AE LEVEL  
I R I S LEVEL  
0
1 2 8  
:
:
SHUTERE  
SPEED  
: STEP  
: 1 / 8  
SENS I T I V I TY : STEP  
LEVEL  
ALC MAX  
:
:
I SO1 0 0  
I SO4 0 0  
SEND PRIOR I TY : M O  
REC quick menu screen  
MENU RESET  
OK?  
Normal screen  
OK  
:
[SET ]  
CANCEL: [ MENU ]  
Press the MENU  
button while in the  
PLAY mode or  
FREEZE mode.  
MENU RESET screen  
- - - PLAY / FREEZE MENU- - -  
ON SCREEN  
SEND PR I OR I T : MO  
:
MEMORY NUM  
V I DEO MEMORY C LEAR  
OK?  
BAR LEVEL  
: 0.7V  
MENU RESET . .  
V I DEO MEMORY CLEAR . .  
T I ME ADJUST .  
.
OK  
:
[ SET ]  
CANCEL: [ MENU ]  
PLAY menu screen  
MEMORY CLEAR screen  
- - - T I ME ADJUST - - -  
ADJUST T I ME  
1 9 9 9 / 1 2 / 3 1 2 3 : 5 9 : 0 0  
ADJUST [ UP ] [ DOWN ]  
SET  
E
[ SET ]  
EX I T  
[ MENU ]  
TIME ADJUST screen  
E44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- - - EXPOSURE - - -  
I R I S MODE  
:
AUTO  
AE LEVEL  
I R I S LEVEL  
I R I S DETECT  
I R I S AREA  
SHUTTER  
SPEED  
SENCET I V I TY  
LEVEL  
: 0  
: 1 2 8  
: NORMAL  
: FULL  
: STEP  
: 1 / 8  
Normal screen  
Press the MENU button  
for at least 2 seconds  
: STEP  
:
I SO1 0 0  
ALC MAX  
:
I SO4 0 0  
while in the REC mode.  
EXPOSURE screen  
- - -REC MENU - - -  
1 : EXPOSURE .  
2 :WH I TE BALANCE .  
3 : FREEZE .  
4 : PROCESS .  
5 : SYSTEM SETT I NG .  
.
- - -WHI TE BALANCE - - -  
.
COLOR TEMP  
WH I T E BA L  
LEVEL ( R )  
:
3 2 0 0K  
.
: AUTO  
: 0  
.
.
: 0  
LEVEL ( B )  
SHAND I NG MODE: OFF  
LEVEL ( R )  
LEVEL ( G )  
LEVEL ( B )  
:
:
:
REC normal menu screen  
WHITE BALANCE screen  
- - - FREEZE - - -  
CANCEL  
: MANUAL  
FREEZE screen  
3/3  
2/3  
- - - PROCESS ( 1 / 3 )  
DETA I L  
LEVEL  
-
- -  
:
ADJUST  
: 0  
: H I GH  
: 0.0%  
H
FREQUENCY  
LEVEL DEP  
GAMMA  
LEVEL  
:
NORMAL  
:
MASTER BL  
:
ACK  
0
PROCESS screen  
- - - SYSTEM SETT I NG - - -  
ON SCREEN  
:
MEMORY NUM  
FRZ D I SPLAY : ON  
SEND PRIOR ITY : MO  
MON I TOR  
BAR LEVEL  
NEGA  
: F I NE  
: 0.7V  
: OFF  
.
.
MENU RESET  
V I DEO MEMORY CLEAR .  
T I ME ADJUST  
.
SYSTEM SETTING screen  
E45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
Setting procedure  
REC normal menu screen  
MENU DOWN  
UP MODE/SET  
1. Press the MODE button to enter the REC mode (REC  
LED on), then press and hold the MENU for at least 2  
seconds to display the REC normal menu screen. (If  
the MENU button is not pressed long enough, the REC  
mode quick menu will appear. In this case, press the  
MENU button to return to the normal screen, then press  
and hold the MENU button for at least 2 seconds.)  
SCSI  
REC  
SEND AW/SEL MODE  
UP DOWN SET  
REC LED  
MENU  
PLAY  
FREEZE  
LENS  
MONITOR  
@ @ @ @ @ @  
REMOTE  
DC IN  
POWER  
ON  
1
2
3
4
SEE INSTRUCTION MANUAL  
2. Press the UP or DOWN button to select a menu item  
(the menu item will be displayed in purple when se-  
lected), then press the SET button to display the  
submenu screen.  
Menu item  
- - - REC MENU - - -  
1 : EXPOSURE . .  
2 :WH I TE BALANCE . .  
3 : FREEZE . .  
4 : PROCESS . .  
3. In the submenu screen, press the UP or DOWN button  
in the same manner as above to select a submenu item,  
then press the SET button.  
5 : SYSTEM SETT I NG . .  
The set value will be displayed in purple, indicating that  
it can be changed.  
REC normal menu screen  
4. Use the UP and DOWN buttons to change to set value,  
then press the SET button to confirm (the set value will  
return to white).  
Menu item  
Set value  
- - - EXPOSURE - - -  
Pressing the UP or DOWN button increments the set  
value in unit of 10. Use this feature when making large  
changes in value.  
I R I S MODE  
AE LEVEL  
I R I S LEVEL  
I R I S DETECT  
I R I S AREA  
SHUTTER  
:
AUTO  
: 0  
: 1 2 8  
: NORMAL  
: FULL  
: STEP  
: 1 / 8  
MEMO  
SPEED  
SENCET I V I TY  
LEVEL  
: STEP  
: I SO1 0 0  
Pressing the MENU button at this time will return the setting to  
the previous value without making changes.  
ALC MAX  
: I SO4 0 0  
Submenu screen (example)  
EXPOSURE menu  
5. Press the MENU button to return to the menu screen.  
E46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY menu screen  
- - - PLAY / FREEZE MENU- - -  
ON SCREEN  
SEND PRIO  
BAR LEVEL  
MENU RESET . .  
V I DEO MEMORY CLEAR . .  
T I ME ADJUST . .  
:
MEMORY NUM  
I
: MO  
TY  
: 0.7V  
R
1. Enter the PLAY or FREEZE mode, then press the MENU  
button to display the PLAY menu screen.  
2~5. Follow the steps described in the REC normal  
screen menu.  
PLAY menu screen  
REC quick menu screen  
- - - REC MENU ( QU I CK ) - - -  
AE LEVEL  
I R I S LEVEL  
SHUTTER  
LEVEL  
SENS I T I V I TY  
SPEED  
: 0  
: 1 2 8  
1. Press the MODE button to enter the REC mode (RED  
LED on), then lightly press the MENU button to display  
the REC quick menu screen.  
: STEP  
: 1 / 8  
: STEP  
: I SO1 0 0  
: I SO4 0 0  
ALC MAX  
(If the MENU button is pressed for more than 2 sec-  
onds, the REC normal menu will appear. In this case,  
press the MENU button to return to the normal screen,  
then press the MENU lightly.)  
REC quick menu screen  
2~5. Follow the steps described in the REC normal  
screen menu.  
About the submenu screens of the normal REC menu  
1 : EXPOSURE: ................. Used for video level related settings such as iris, shutter, sensitivity,  
etc. ( ੬ page 48)  
2 : WHITE BALANCE: ........ Used to make settings for color temperature, white balance, shad-  
ing compensation, etc. ( ੬ page 51)  
3 : FREEZE: ....................... Used to set the cancel method when using the FREEZE function.  
( ੬ page 53)  
4 : PROCESS (1/3): ........... Used to set the detail compensation, gamma and master black.  
( ੬ page 53)  
(2/3): ........... Used to set the flare compensation and ABL.  
(3/3): ........... Used to set the color matrix.  
5 : SYSTEM SETTING: ...... Used when executing screen display, VGA mode switch and initial-  
ization. ( ੬ page 57)  
E47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
EXPOSURE screen  
Menu item  
Function/variable range  
Set depending on the used lens  
AUTO: when using an auto-iris lens  
Default value  
ATUO  
IRIS MODE  
MANUAL: when using a manual iris lens or no lens  
AE LEVEL  
Used to adjust the video level when using auto iris, ALC  
and EEI.  
Raise the level: increase the number  
Lower the level: decrease the number  
[Variable range: –128 ~ 127]  
0
@ @ @ @ @ @  
IRIS LEVEL  
Used to set the iris level when the IRIS MODE is set to 128  
MANUAL.  
Open iris: increase the number  
Close iris: decrease the number  
[Variable range: 0 ~ 255]  
IRIS DETECT  
Used to change the set value of the detection level during NORMAL  
auto iris.  
NORMAL: normal position  
PEAK:  
AVG:  
detects the peak brightness level for better  
view of highly bright objects.  
detects the average brightness for better view  
of objects.  
IRIS AREA  
Used to set the detection area during auto iris. Set ac- FULL  
cording to the usage condition.  
CIRCLE  
SQUARE  
FULL  
SPOT  
Detection area Detection area Detection area Detection area  
MEMO  
When selecting the detection area, the area is displayed on  
the screen.  
E48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPOSURE screen (continued)  
Menu item  
SHUTTER  
Function/variable range  
Used to set the shutter mode.  
Default value  
STEP  
STEP:  
the shutter speed can be changed using the  
SPEED submenu item.  
V.SCAN: used to clear the horizontal line noise when re-  
cording a PC monitor by adjusting to the scan  
speed of the monitor.  
The shutter can be changed in detail using the  
LEVEL submenu item. ( ੬ Page 42 Recording  
a PC monitor)  
EEI:  
Used to automatically change the shutter speed  
depending on the object brightness.  
(max: 1/1920)  
OFF:  
• 1/30 when VGA is set to the DRAFT mode  
• 1/7.5 when VGA is set to the FINE mode  
• 1/7.5 when in the SXGA mode  
SPEED  
The shutter sped can be changed when the shutter is set STEP: 1/8  
to STEP or V.SCAN.  
V.SCAN:  
1/30  
[STEP variable range: 1/1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60,  
1/125, 1/250, 1/500, 1/1000,  
1/2000]  
[V.SCAN variable range: 1/30, ~ 1/5906. 8]  
MEMO  
• In areas which the power supply frequency is 50Hz, set-  
ting the unit to 1/100 can reduce flickering when record-  
ing under florescent lighting.  
• There may be shortage of light when increasing the shut-  
ter speed. In this case, adjust the iris or sensitivity. Spe-  
cial attention is required for the picture quality when rais-  
ing the sensitivity since images may become distorted.  
E49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
EXPOSURE screen (continued)  
Menu item  
Function/variable range  
Used to set the sensitivity mode.  
Default value  
STEP  
SENSITIVITY  
STEP:  
the sensitivity can be changed using the LEVEL  
submenu item.  
ALS:  
the sensitivity si automatically changed by the  
brightness. Maximum sensitivity is set in the next  
ALC MAX menu item.  
@ @ @ @ @ @  
V.SENS: the sensitivity can be set in detail using the  
LEVEL submenu item.  
LEVEL  
The sensitivity can be changed when the sensitivity mode STEP:  
is set to STEP or V.SENS.  
ISO100  
[STEP variable range: ISO100, ISO200, ISO400]  
[V.SENS variable range: ISO100 ~ ISO400]  
V. SENS:  
ISO100  
ALC MAX  
This can be set when the sensitivity mode is set to ALC. ISO400  
Used to set the maximum sensitivity of ALC, which auto-  
matically switches the sensitivity depending on the bright-  
ness.  
[Variable range: ISO200, ISO400]  
E50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHITE BALANCE screen  
Menu item  
Function/variable range  
Default value  
COLOR TEMP  
Used to set the basic color temperature of the white bal- 3200K  
ance.  
3200K: for use under low color temperature such as halo-  
gen lamps, etc.  
5200K: for use under high color temperature such as the  
sunlight, etc.  
WHITE BAL  
Used to set the white balance mode.  
PRESET: the white balance is locked to the COLOR  
TEMP setting.  
AUTO  
(3200K:141/5200K:101)  
AUTO:  
Used when adjusting the white balance. ( ੬  
Page 30 White balance adjustment)  
Fine adjustment can be made for the white  
balanced using LEVEL (R) and LEVEL (B).  
MANUAL: the white balance can be changed using  
LEVEL (R) and LEVEL (B).  
LEVEL (R)  
LEVEL (B)  
The color red of the white balance can be adjusted when AUTO : 0  
WHITE BALANCE is set to AUTO or MANUAL.  
Increase the number: stronger red on the screen  
Decrease the number: weaker red on the screen  
[Variable range during AUTO: –32 ~ 31]  
MANUAL :  
128  
[Variable range during MANUAL: 0 ~ 255]  
The color blue of the white balance can be adjusted when AUTO : 0  
WHITE BALANCE is set to AUTO or MANUAL.  
Increase the number: stronger blue on the screen  
Decrease the number: weaker blue on the screen  
[Variable range during AUTO: –32 ~ 31]  
MANUAL :  
128  
[Variable range during MANUAL: 0 ~ 255]  
E51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
WHITE BALANCE screen (continued)  
Menu item  
Function/variable range  
Default value  
Color temperatures when setting COLOR TEMP and WHITE BALANCE  
Color temperature  
WHITE  
COLOR  
TEMP  
2000K  
3200K  
5200K  
15000K  
BALANCE  
PRESET  
AUTO  
3200K  
@ @ @ @ @ @  
MANUAL  
PRESET  
AUTO  
5200K  
MANUAL  
SHADING  
MODE  
Used to set whether to perform white shading adjustment. OFF  
OFF: no white shading adjustment  
ADJUST: the white shading can be adjusted.  
White shading adjustment ( ੬ page 32)  
LEVEL (R)  
The color red of the white shading is adjusted only when  
SHADING MODE is set to ADJUST.  
Increase the number: weaker red at the bottom of the  
screen and stronger red at the top.  
Decrease the number: weaker red at the top of the screen  
and stronger red at the bottom.  
[Variable range: –128 ~ 127]  
0
0
0
LEVEL (G)  
The color green of the white shading is adjusted only when  
SHADING MODE is set to ADJUST.  
Increase the number: weaker green at the bottom of the  
screen and stronger green at the top.  
Decrease the number: weaker green at the top of the screen  
and stronger green at the bottom.  
[Variable range: –128 ~ 127]  
LEVEL (B)  
The color blue of the white shading is adjusted only when  
SHADING MODE is set to ADJUST.  
Increase the number: weaker blue at the bottom of the  
screen and stronger blue at the top.  
Decrease the number: weaker blue at the top of the screen  
and stronger blue at the bottom.  
[Variable range: –128 ~ 127]  
E52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREEZE screen  
Menu item  
Function/variable range  
Default value  
MANUAL  
CANCEL  
Used to set the cancellation method of FREEZE.  
MANUAL: freeze is cancelled by pressing the FREEZE  
button.  
AUTO:  
freeze is automatically cancelled after 5 sec-  
onds.  
PROCESS (1/3) screen  
Menu item  
DETAIL  
Function/variable range  
Default value  
ADJUST  
Used to set whether to emphasize details.  
ADJUST: changes the detail emphasis  
OFF:  
no detail emphasis  
LEVEL  
The emphasis level of the detail is adjusted when DETAIL  
is set to ADJUST.  
0
Sharpen the detail: increase the number  
Soften the detail:  
decease the number  
[Variable range: –7 ~ 7]  
H
FREQUENCY DETAIL is set to ADJUST.  
HIGH: increases the frequency of the detail emphasis.  
Used to change the frequency of the detail emphasis when HIGH  
Used when recording objects with detailed pat-  
terns.  
LOW: decreases the frequency of the detail emphasis.  
Used when recording objects with large patterns.  
LEVEL DEP  
This can be set when DETAIL is set to ADJUST.  
Depending on the detail emphasis, noise may increase in  
black areas. To reduce the amount of noise in black ar-  
eas, set the video level in this menu which does not em-  
phasize the detail.  
0.0%  
[Variable range when ON: 0.0% ~ 28.5% (0.5 steps)]  
E53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
PROCESS (1/3) screen (continued)  
Menu item  
GAMMA  
Function/variable range  
Default value  
Used to set whether the gamma curve to determine the NORMAL  
reproduction of black is to be set using the standard value  
or available for change.  
NORMAL: the gamma curve is set using the standard  
value (0.45)  
@ @ @ @ @ @ADJUST:  
set when changing the gamma curve  
LEVEL  
The gamma curve can be adjusted only when GAMMA is 0.45  
set to ADJUST.  
Increase the number: improves the reproduction of  
black. However, the reproduction  
quality of bright areas becomes  
lower.  
Decrease the number: improves the reproduction of  
bright areas. However, the repro-  
duction quality of black becomes  
lower.  
[Variable range: 0.35 ~ 1.00 (21 steps)]  
MASTER BLACK Used to adjust the pedestal level (master black), which is  
the standard black during lens cap. To view black areas,  
increase the pedestal level to brighten the entire screen.  
Increase the pedestal level: increase the number  
Decrease the pedestal level: decrease the number  
[Variable range: –99 ~ 99]  
0
E54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROCESS (2/3) screen  
Menu item  
FLARE (R)  
Function/variable range  
Default value  
0
Rch compensation of the black level when flaring effect  
occurs and the entire screen becomes washed out from  
the light entering the lens reflecting diffusely. Perform this  
function along with FLARE (B).  
Stronger red: increase the number  
Weaker red: decrease the number  
[Variable range: –128 ~ 127]  
FLARE (B)  
Bch compensation of the black level when flaring effect  
occurs and the entire screen becomes washed out from  
the light entering the lens reflecting diffusely. Perform this  
function along with FLARE (R).  
0
Stronger blue: increase the number  
Weaker blue: decrease the number  
[Variable range: –128 ~ 127]  
ABL  
Used to set whether to automatically adjust the black level NORMAL  
of the video when recording. Adjust when the black level  
of the video during recording fluctuates.  
NORMAL: executes ABL (Auto Black Level) adjustment  
using a fixed value.  
ADJUST: the compensation of the ABL adjustment can  
be changed using the LEVEL submenu item  
below.  
LEVEL  
The black level can be adjusted only when ABL is set to  
ADJUST.  
0
Decrease the black level (higher compensation):  
increase the number  
Increase the black level (lower compensation):  
decrease the number  
[Variable range: –25 ~ 25]  
E55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
PROCESS (2/3) screen (continued)  
Menu item  
COLOR  
Function/variable range  
Default value  
Used to set whether to change the color matrix or use the OFF  
standard value.  
MATRIX  
OFF:  
the standard value of the color matrix is used.  
ADJUST: the color matrix becomes available for change.  
The following adjustments can only be made  
with this setting.  
@ @ @ @ @ @  
R–G  
Used to adjust the R–G signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
12  
12  
8
R–B  
Used to adjust the R–B signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
G–R (+)  
G–R (–)  
G–B (+)  
G–B (–)  
B–R  
Used to adjust the G–R (+) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
Used to adjust the G–R (–1) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
3
Used to adjust the G–B (+) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
8
Used to adjust the G–B (–) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
3
Used to adjust the B–R signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
2
B–G (+)  
B–G (–)  
Used to adjust the B–G (+) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
0
Used to adjust the B–G (–) signal (0 ~ 25%)  
[Variable range: 0 ~ 31]  
17  
E56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM SETTING screen  
Menu item  
Function/variable range  
Default value  
ON SCREEN  
Used to set the text to display in the video signal output- MEMORY  
ted to the MONITOR terminal.  
ALC EEI: displays ALC and EEI status during the  
REC mode.  
NUM  
MEMORY NUM: displays the memory image number  
during the PLAY mode.  
BOTH:  
displays both sensitivity during REC  
mode and memory image number dur-  
ing PLAY mode.  
OFF:  
no text is displayed for either REC mode  
or PLAY mode.  
FRZ DISPLAY  
Used to set whether to display FREEZE on the screen ON  
when in operation.  
ON: displays FREEZE on the screen  
OFF: no display  
SEND PRIOIRTY Used to set which device has output priority when both MO  
printer and MO drive are connected.  
PRINTER: output priority is given to the printer.  
MO:  
output priority is given to the MO drive.  
MONITOR  
Used to set the video resolution outputted when in the FINE  
VGA mode.  
FINE:  
640 × 480 pixels (however, video is outputted in  
7.5 frames per second)  
DRAFT: 640 × 240 pixels (video is outputted in 30 frames  
per second)  
MEMO  
This menu item cannot be selected when the unit is set the  
SXGA mode using the dip switches located on the rear.  
(--------- is displayed)  
E57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
SYSTEM SETTING screen (continued)  
Menu item  
Function/variable range  
Default value  
BAR LEVEL  
Used to set the level of the color bar signal outputted from 0.7V  
the MONITOR terminal of this unit.  
0.7V: outputs 0.7V color bar signals  
0.58V: outputs 0.58V color bar signals  
NEGA It is possible to change the outputted signals to the MONI- OFF  
@ @ @ @ @ @  
TOR terminal to negative signals.  
ON: outputs negative signals  
OFF: does not output negative signals  
MENU RESET  
Initializes all menu switch settings other than the time and date.  
Resetting settings ( ੬ page 62)  
VIDEO MEMORY Clears all images stored in the main unit memory.  
CLEAR  
Clearing all images from the memory ( ੬ page 38)  
TIME ADJUST  
Calls the time and date setting screen.  
Setting the time and date ( ੬ page 26)  
E58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu screen of the PLAY mode  
Menu item  
Function/variable range  
Used to set the text to display in the video signal output- MEMORY  
ted to the MONITOR terminal. NUM  
ALC EEI: displays ALC and EEI status during the  
REC mode.  
Default value  
ON SCREEN  
MEMORY NUM: displays the memory image number  
during the PLAY mode.  
BOTH:  
displays both sensitivity during REC  
mode and memory image number dur-  
ing PLAY mode.  
OFF:  
no text is displayed for either REC mode  
or PLAY mode.  
SEND PRIORYTY Used to set which device has output priority when both MO  
printer and MO drive are connected.  
PRINTER: output priority is given to the printer.  
MO:  
output priority is given to the MO drive.  
BAR LEVEL  
Used to set the level of the color bar signal outputted from 0.7V  
the MONITOR terminal of this unit.  
0.7V: outputs 0.7V color bar signals  
0.58V: outputs 0.58V color bar signals  
Initializes all menu switch settings other than the time and date.  
MENU RESET  
Resetting settings ( ੬ page 62)  
Clears all images stored in the main unit memory.  
Clearing all images from the memory ( ੬ page 38)  
VIDEO ME.MORY  
CLEAR  
Calls the time and date setting screen.  
TIME ADJUST  
Setting the time and date ( ੬ page 26)  
E59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
REC mode quick menu screen  
Menu item  
AE LEVEL  
Function/variable range  
Default value  
0
Used to adjust the video level when using auto iris, ALC  
and EEI.  
Raise the level: increase the number  
Lower the level: decrease the number  
[Variable range: –128 ~ 127]  
@ @ @ @ @ @  
IRIS LEVEL  
Used to set the iris level when the IRIS MODE is set to 128  
MANUAL.  
Open iris: increase the number  
Close iris: decrease the number  
[Variable range: 0 ~ 255]  
SHUTTER  
Used to set the shutter mode.  
STEP: the shutter speed can be changed using the  
SPEED submenu item.  
STEP  
V.SCAN: used to clear the horizontal line noise when re-  
cording a PC monitor by adjusting to the scan  
speed of the monitor.  
The shutter can be changed in detail using the  
LEVEL submenu item. (Recording a PC moni-  
tor ( ੬ page 42))  
EEI:  
Used to automatically change the shutter speed  
depending on the object brightness.  
(max: 1/255.1)  
OFF:  
• 1/30 when VGA is set to the DRAFT mode  
• 1/7.5 when VGA is set to the FINE mode  
• 1/7.5 when in the SXGA mode  
SPEED  
The shutter sped can be changed when the shutter is set STEP : 1/8  
to STEP or V.SCAN.  
V. SCAN :  
1/30  
[STEP variable range: 1/1, 1/2, 1/4, 1/8, 1/15, 1/30,  
1/60, 1/125, 1/250, 1/500,  
1/1000, 1/2000]  
[V.SCAN variable range: 1/30, ~ 1/5906. 8]  
E60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu item  
SPEED  
Function/variable range  
Default value  
MEMO  
• In areas which the power supply frequency is 50Hz, set-  
ting the unit to 1/100 can reduce flickering when record-  
ing under florescent lighting.  
• There may be shortage of light when increasing the shut-  
ter speed. In this case, adjust the iris or sensitivity. Spe-  
cial attention is required for the picture quality when rais-  
ing the sensitivity since images may become distorted.  
SENSITIVITY  
Used to set the sensitivity mode.  
STEP  
STEP:  
the sensitivity can be changed using the LEVEL  
submenu item.  
ALS:  
the sensitivity si automatically changed by the  
brightness. Maximum sensitivity is set in the next  
ALC MAX menu item.  
V.SENS: the sensitivity can be set in detail using the  
LEVEL submenu item.  
LEVEL  
The sensitivity can be changed when the sensitivity mode STEP:  
is set to STEP or V.SENS.  
ISO100  
[STEP variable range: ISO100, ISO200, ISO400]  
[V.SENS variable range: ISO100 ~ ISO400]  
V.SENS:  
ISO100  
ALC MAX  
This can be set when the sensitivity mode is set to ALC. ISO400  
Used to set the maximum sensitivity of ALC, which auto-  
matically switches the sensitivity depending on the bright-  
ness.  
[Variable range: ISO200, ISO400]  
E61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Menu screen settings (continued)  
Resetting settings  
This function is used to initialize all settings other than the time and date.  
MENU DOWN  
1. Press the MODE button to enter the PLAY mode (PLAY  
LED on), then press the MENU button to display the  
MENU screen.  
UP MODE/SET  
SCSI  
REC  
SEND AW/SEL MODE  
MENU  
UP  
DOWN  
SET  
PLAY LED  
PLAY  
FREEZE  
@ @ @ @ @ @  
LENS  
MONITOR  
REMOTE  
ON  
DC IN  
POWER  
1
2
3
4
SEE INSTRUCTION MANUAL  
- - - PLAY / FREEZE MENU - - -  
ON SCREEN  
SEND PR I OR I T : MO  
:
MEMORY NUM  
BAR LEVEL  
: 0.7V  
MENU RESET . .  
V I DEO MEMORY CLEAR . .  
T I ME ADJUST . .  
PLAY menu screen  
2. Press the DOWN button to select MENU RESET (dis-  
played in purple when selected), then press the SET  
button.  
MENU RESET  
OK?  
The MENU RESET screen will appear.  
(The MENU RESET screen can also be displayed by  
selecting 5. SYSTEM SETTING in the REC mode, then  
selecting MENU RESET.)  
OK  
: [ SET ]  
CANCEL: [ MENU ]  
MENU RESET screen  
SET button  
3. Press the SET button to initialize all settings other than  
the values set in the TIME ADJUST screen.  
At this time, MENU RESET OPERATION message will  
appear.  
MENU RESET  
OPERAT I ON  
Resetting  
E62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. When all values are reset to their default settings, MENU  
RESET OK message will appear for 3 seconds, then  
the unit will return to the MENU screen.  
MENU RESET  
O
K
5. Press the MENU once more to return to the normal  
screen.  
Reset completed  
E63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Connecting to a PC  
Compatible systems 1  
With SCSI connection, still images of the main unit can be exported to a PC while checking the  
recorded images on a VGA monitor.  
● The main unit can be controlled from the PC. For this system, the PC is the host (initiator) and  
the main unit (digital camera) is the target.  
● Images exported to a PC can be processed using the Photoshop application software.  
AA-P700  
AC ADAPTER AA-P700  
POWER  
@ @ @ @ @ @  
ON  
AC  
OFF  
AC adapter  
RS-232C  
SCSI-2  
RGB, Hs, Vs  
DC IN  
PC  
MO disk drive  
CP700DSA MITSUBISHI  
PAPER FEED  
&
CUT  
COPY  
ONLINE  
ALARM SHEET PAPER  
DATA  
POWER  
OPEN  
MEMO  
Printer  
(Recommended:  
Mitsubishi P700-DSA)  
• Set the SCSI ID dip switch of  
the main unit to other than 7  
( ੬ page 24).  
• Do not use identical IDs for  
the setting ID.  
• The maximum al-  
lowed length of the  
SCSI terminal cable  
is 3m.  
VGA monitor  
* For this system, the attached camera remote control software and the SCSI capture plug-in  
software must be installed to the PC. For details, see the attached instructions of the software.  
ⅥCamera remote control software  
• GUI control  
• RS-232C  
ⅥSCSI capture plug-in software  
• Photoshop compatible  
• Windows compatible  
• Twain compatible  
• SCSI control compatible  
E64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible systems 2  
It is possible to process SXGA compatible images of this unit directly on a PC using a capture  
board. Images can be processed while viewing still images and camera video of this unit on a  
PC monitor.  
● Images can be checked on a SXGA monitor when using an SXGA compatible capture board.  
● Images can be checked on a VGA monitor when using a VGA compatible capture board.  
AA-P700  
AC ADAPTER AA-P700  
POWER  
ON  
AC  
OFF  
AC adapter  
Analog RGB, WEN, Hs, Vs, RS-232C  
Capture board  
MO disk drive  
CP700DSA MITSUBISHI  
PAPER FEED  
&
CUT  
COPY  
ONLINE  
ALARM SHEET PAPER  
DATA  
POWER  
OPEN  
MEMO  
• Set the SCSI ID dip switch of  
the main unit to other than 7  
( ੬ page 24).  
Printer  
Flash  
• Do not use identical IDs for  
the setting ID.  
Freeze switch  
* For this system, the attached camera remote control software must be installed to the PC. For  
details, see the attached instructions of the software.  
E65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Others  
Specifications  
Imaging device:  
1/2 inch IT CCD × 3  
Progressive scanning  
1.45 million pixels (1392 (H) × 1040 (V))  
1360 × 1024  
Scanning method:  
Available no. of pixels:  
Effective no. of pixels:  
Color separation method:  
Dichroic prism method  
4:3  
@ @ @ @ @ @  
Aspect ratio:  
V.SCAN:  
1/30 ~ 1/5906.8  
Detail compensation method: both H and V  
Lens mount:  
C mount  
Analog output:  
R/G/B signal: 0.7V (p-p), 7.5 Ω  
Output signals:  
(Choice of 1)  
~
Ä
1360 × 1024 pixels, 7.5 frames/sec.  
640 × 480 pixels, 60 frames/sec.  
(screen update rate: 7.5 frames/sec., vertical resolution of 480  
lines)  
Å
640 × 280 pixels, 60 frames/sec.  
(screen update rate: 30 frames/sec., vertical resolution of 240  
lines)  
Synchronization method:  
Sync signal output:  
Digital output:  
internal synchronization  
Hs, Vs 3V (p-p) negative polarity  
SCSI-2, 50-pin half-pitch SCSI connector  
Can switch between target and initiator  
Output modes:  
Continuous no. of recording: 5 (4 when output mode is ~)  
Input power supply voltage: DC 12V (DC 10.5V to 15V  
)
Power consumption:  
Weight:  
Approx. 15W  
Approx. 850g  
E66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External dimensions (unit: mm)  
150  
70  
142.5  
1
C-MOUNT  
DIGITAL CAMERA KY-F70  
41.5  
14  
1/4 inch screw  
Design and specifications are subject to change without notice.  
E67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.  
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.  
Printed in Japan  
SL96172  
© 1999 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Integra DVD Player DPS 73 User Manual
Jameco Electronics Network Card 487023U User Manual
Jenn Air Convection Oven SVE47500 User Manual
Kambrook Hot Beverage Maker KAK36 User Manual
Kathrein Satellite TV System UFS 902 User Manual
Kettler Bicycle 8718 710 720 730 750 User Manual
King Canada Vacuum Cleaner 8530LP User Manual
Kompernass Battery Charger KH 967 User Manual
Kompernass Clock Radio KH 2190 User Manual
Konica Minolta Digital Camera E Mini Multi Media Camera User Manual