Table of Contents
Getting Started
Connecting
DVD Audio/Video Player
DPS-7.3
Instruction Manual
Setting Up the Player
Basic Playback
Advanced Playback
Function Setup
Toubleshooting
Others
Thank you for purchasing the Integra DVD
Audio/Video Player.
Please read this manual thoroughly before
making connections and plugging in the unit.
Following the instructions in this manual will
enable you to obtain optimum performance
and listening enjoyment from your new DVD
Audio/Video Player.
Please retain this manual for future reference.
E
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING:
WARNING
AVIS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Important Safeguards
1. Read Instructions – All the safety and operating instructions
13. Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
should be read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the
14. Lightning – For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the
appliance due to lightning and power-line surges.
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should
be followed.
5. Cleaning – Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as
recommended by the manufacturer.
15. Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
6. Attachments – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
16. Object and Liquid Entry – Never push objects of any kind into
the appliance through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the appliance.
7. Water and Moisture – Do not use the appliance near water –for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories – Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the appliance.
Any mounting of the appliance should follow the manufacturer’s
instructions, and should use a mounting accessory
17. Servicing – Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring Service – Unplug the appliance form the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
recommended by the manufacturer.
A. When the power-supply cord or plug is damaged,
9. An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
PORTABLE CART WARNING
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
S3125A
10. Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the appliance and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar
surface. The appliance should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation
is provided. There should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
19. Replacement Parts – When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
11. Power Sources – The appliance should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your appliance dealer or local power company.
20. Safety Check – Upon completion of any service or repairs to
the appliance, ask the service technician to perform safety
checks to determine that the appliance is in proper operation
condition.
12. Grounding or Polarization – The appliance may be equipped
with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
21. Wall or Ceiling Mounting – The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
22. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
23. Liquid Hazards – The appliance should not be exposed to
dripping or splashing and no objects filled with liquids, such as
vases should be placed on the appliance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT”. So, to use this model
properly, read this Instruction Manual carefully. In case of any
trouble, please contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
DANGER:
VISIBLE LASER AND INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT
STARE INTO BEAM.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
For U.S. model
For Canadian model
The laser is covered by a housing which prevents exposure during
operation or maintenance. However, this product is classified as a
Laser Product by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and Drug Administration.
According to their regulations 21 CFR section 1002.30, all
manufactures who sell Laser Products must maintain records of
written communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any complaints
about instructions or explanations affecting the use of this product,
please feel free to write to the address on the back page of this
manual. When you write us, please include the model number and
serial number of your unit.
NOTE: This class B digital apparatus complies with Canadian
ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle pour les Canadien
REMARQUE: Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indicated on the rear
panel.
Sur les modèles dont la fiche est polarisee:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
FCC INFORMATION FOR USER
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Regional Restriction Codes (Region Number)
8. Notes on Handling
Regional restriction codes are built into DVD Players and DVD-
Video media for each sales region. If the regional code of the
DVD Player does not match one of the regional codes on the
DVD-Video, playback is not possible.
• When shipping the unit, use the original shipping carton and
packing materials. For maximum protection, repack the unit as
it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the unit.
Do not leave rubber or plastic products in contact with the unit
for a long time. They will leave marks on the finish.
The regional number can be found on the rear panel of the DVD
1
Player. (e.g.
for Region 1)
2. About This Manual
• The top and rear panels of the unit may become warm after
a long period of use.This is not a malfunction.
• When the unit is not in use, be sure to remove the disc and
turn off the power.
• If you do not use the unit for a long period, the unit may not
function properly in the future. Turn on and use the unit
occasionally.
This manual explains the basic procedures for operating the
DVD Player. Some DVD-Video and DVD-Audio discs do not
support the full potential of the DVD technology. Your DVD
Player may therefore not respond to all operating commands.
Refer to instruction notes on discs.
A “ ” mark may appear on the TV screen during operation. It
means that the operation is not permitted by the DVD Player or
the disc.
9. To Obtain a Clear Picture
The unit is a high technology, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn down, the
picture quality becomes poor. To obtain a clear picture, we
recommend regular inspection and maintenance (cleaning or
parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
3. Recording Copyright
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
4. Power
WARNING
10. Notes on Moisture Condensation
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
Moisture condensation damages the unit.
Please read the following carefully.
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the
area where the unit will be used meets the required voltage
(e.g., AC 120 V, 60 Hz) written on the rear panel.
• What is moisture condensation?
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside the unit, one of
the most crucial internal parts of the unit.
5. Do not touch the unit with wet hands
Do not handle the unit or power cord when your hands are wet
or damp. If water or any other liquid enters the case, take the
unit to an authorized service center for inspection.
• Moisture condensation occurs in the following cases.
– When you bring the unit directly from a cold place to a
warm place.
6. Location of the unit
– When you use the unit in a room where you just turned on
the heater, or a place where the cold wind from the air
conditioner directly hits the unit.
– In summer, when you use the unit in a hot and humid place
just after you move the unit from an air conditioned room.
– When you use the unit in a humid place.
• Place the unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides of
the unit especially when it is placed in an audio rack. If
ventilation is blocked, the unit may overheat and malfunction.
• Do not expose the unit to direct sunlight or heating units as
the unit’s internal temperature may rise and shorten the life of
the pickup.
• Avoid damp and dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the
unit on or above one of the speakers.
• Be sure the unit is placed in a horizontal position. Never place
it on its side or on a slanted surface as it may malfunction.
• When you place the unit near a TV, radio, or VCR, the
playback picture may become poor and the sound may be
distorted. In this case, place the unit away from the TV, radio,
or VCR.
• Do not use the unit when moisture condensation may
occur.
If you use the unit in such a situation, it may damage discs
and internal parts. Remove the disc, connect the power cord
of the unit to the wall outlet, turn on the unit, and leave it for
two or three hours. After a few hours, the unit will have
warmed up and evaporated any moisture. Keep the unit
connected to the wall outlet and moisture condensation will
seldom occur.
7. Care
From time to time you should wipe the front and rear panels and
the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth
in a weak solution of mild detergent and water, wring it out dry,
and wipe off the dirt. Following this, dry immediately with a clean
cloth.
Do not use rough material, thinners, alcohol or other chemical
solvents or cloths since these could damage the finish or remove
the panel lettering.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Notes on Discs
This section shows you how to handle, clean, and store discs.
The Structure of the Disc Content
Playable Discs
This DVD Player can playback the following discs.
DVD-Video
Normally, the contents of DVD-Video are divided into titles,
and the titles are subdivided into chapters.
Disc mark
*1
*2
Title 2
Title 1
Chapter 1
DVD videos
DVD Audio
Chapter 1
Chapter 2
Chapter 2
Chapter 3
DVD-Audio
The contents of DVD-Audio are divided into groups, and the
groups are subdivided into tracks.
VIDEO CDs
Audio CDs
Group 2
Group 1
Track 1 Track 2
Track 1 Track 2
Track 3
*3
*3
Video CD/CD
Video CD and CD are divided into tracks.
*1 This unit can play DVD-R discs recorded as DVD video
format.
*2 This unit can play DVD-RW discs recorded as DVD video
format. DVD-RW discs that were recorded with only one-
generation copy permission cannot be played.
Track 1 Track 2
Track 4
Track 5
Track 3
*3 This unit can play CD-R and CD-RW discs recorded in CD
Audio or Video CD format, or with MP3 audio files.
About VIDEO CDs
Playback of certain discs may not be possible. This may be
caused by a number of possibilities, including but not limited
to: whether or not the disc was not finalized, the type of disc
used, the type of recording; damaged or dirt on either the disc
or the players pick up lens.
This DVD Player supports VIDEO CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of Playback Control.)
You can enjoy two playback variations depending on the type of disc.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movies can be played on this DVD Player in the
same way as an audio CD.
* For details, refer to the operating instructions supplied with
your CD recorder.
• VIDEO CD equipped with PBC function (Version 2.0)
• You cannot playback discs other than those listed above.
• You cannot play discs such as CD-ROM etc., even if the
marks in the above table are labeled on those discs.
• This DVD Player uses the PAL/NTSC color system, and
cannot playback DVD videos recorded in any other color
system (SECAM, etc.).
In addition to operation of the VIDEO CD not equipped with the
PBC function, you can enjoy playback with interactive software
and search function using the menu displayed on the TV
screen (Menu Playback). Some of the functions described in
this Instruction Manual may not work with some discs.
• Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the internal
mechanism of the DVD Player.
• Do not use discs that have residue from adhesive tape,
rental discs that have peeling labels, or discs that have
custom labels or stickers. Otherwise, you may not be able
to eject the discs or the DVD Player may become
inoperative.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Discs
MP3 compatibility information
• Do not touch the playback side of the disc.
• The CD-ROM must be ISO 9660 compatible.
• Files should be MPEG1 Audio Layer 3 format, 44.1 or
48kHz, fixed bit-rate. Incompatible files will not play and
“UNPLAYABLE MP3 FORMAT” will be displayed.
• Not compatible with variable bit-rate (VBR) files.
• This system only plays tracks that are named with the file
extension “.mp3” or “.MP3”.
Playback side
• This system is not compatible with multi-session discs.
If you try an play a multi-session disc, only the first
session will be played.
• Do not attach paper or tape to discs.
• Use CD-R or CD-RW media for recording your MP3 files.
The disc must be finalized in order to play.
• Audio encoded at 128Kbps should sound close to regular
audio CD quality. Although this system will play lower bit-
rate MP3 tracks, the sound quality becomes noticeably
worse at lower bit-rates.
Cleaning Discs
• Only the first 8 characters of folder and track names
(excluding the “.mp3” extension) are displayed.
• This system can recognize a maximum of 250 folders and
250 tracks. Discs containing more than 250 folders or tracks
will not play.
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material without
permission.
DVD videos are copy protected, and any recordings made from
these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
Storing Discs
• Do not store discs in a place subject to direct sunlight or
near heat sources.
• Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Features/Supplied Accessories
Features
1
THX*1 Ultra Certified
*
*
*
Manufactured under licence from Lucasfilm Ltd. Lucasfilm and
THX are registered trademarks of Lucasfilm Ltd.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol Ÿ are trademarks of Dolby
Laboratories.
DTS*2/Dolby Digital*3/MPEG2/PCM Digital Audio Outputs
Advanced 192-kHz/24-Bit D/A Converters
Video CD Capability
2
3
54-MHz/10-bit Video D/A Conversion
Audiophile-Grade Audio Performance
Composite Outputs/Component Video Output
High Resolution On-screen Display
Full-Function Remote Control Supplied
Powerful preprogrammed remote
Direct Digital Path
THX Ultra
Before any home theatre component can be THX Ultra certified, it
must pass a rigorous series of quality and performance tests.
Only then can product feature the THX Ultra logo, which is your
guarantee that the Home Theatre products you purchase will give
you superb performance for many years to come.
About THX Certification
Heavy-duty power cord
At the time of THX Certification of this unit, widely accepted
industry performance standards for the features ‘Progressive
Scan Video’ and ‘DVD Audio’ did not exist.
These features are present in the this unit. However, THX has not
checked and does not certify their technical performance.
DVD-Rs & DVD-RWs Capability
Plays DVD-Audio discs
RS-232 interface for system control
Supplied Accessories
Make sure your box contains everything listed below.
The number of accessories is indicated in brackets.
S-video cable [1]
Cable which sends S-video images.
Remote controller (RC-451DV) [1]
Batteries (size AA/UM-3) [2]
Audio/video connection cable [1]
z cable [1]
The cable with the yellow plug is for video. The cable
with the red and white plugs are for audio.
Cable used for system connections to an Integra/
Onkyo component with an z jack.
(The components will not function as a system with
only z connections. Be sure to connect the audio
connection cables correctly as well.)
Power cord [1]
The alphabet displayed at the end of the product name found in catalogs and on the package represents the color of this player. Though the color
varies, the specifications and operations are the same.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Remote Controller
Inserting the Batteries
Using the Remote Controller
Point the remote controller toward the remote control
sensor.
1
Open the battery compartment cover.
Remote control sensor
30˚
30˚
2
Insert the two R6 (size AA) batteries.
Be sure to match the + and – ends of the batteries
with the diagram inside the battery compartment.
Notes
• Place the unit away from strong light such as direct sunlight or
inverted fluorescent light which can prevent proper operation of the
remote controller.
• Using another remote controller of the same type in the same room
or using the unit near equipment which uses infrared rays may
cause operational interference.
• Do not put any object such as a book on the remote controller. The
buttons of the remote controller may be pressed by mistake and
drain the batteries.
3
Close the battery compartment cover.
• Make sure the audio rack doors do not have colored glass. Placing
the unit behind such doors may prevent proper remote controller
operation.
• If there is any obstacle between the remote controller and the
remote control sensor, the remote controller will not operate.
Notes
• Do not mix new batteries with old batteries or different kinds of
batteries.
• To avoid corrosion, remove the batteries if the remote controller is
not to be used for a long time.
• Remove dead batteries immediately to avoid damage from
corrosion. If the remote controller does not operate smoothly,
replace both batteries at the same time.
• The life of the batteries supplied is about six months but this will
vary depending on usage.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For operational instructions, see the page indicated in brackets [ ].
I Front panel
7
8
9 0 -
=
~
!
1
2
3
4
5
6
Sampling Rate (kHz)
192/176.4
96/88.2
Standby/On
Open/Close
Stop
Play
48/44.1
Pause
Video Circuit
Off
Last Memory
Clear
Top Menu
Return
Menu
Setup
Cursor
Standby
Power
Dimmer
Repeat
Random
Display
Push to Enter
On
Off
-
DPS 7.3
@
#
$
%
^
&
*
(
1 Power switch and Standby indicator [16]
0 Menu button [22, 27, 34, 35, 53]
Turns on the main power supply for the DPS-7.3. The DPS-7.3
Use to display or close the DVD menu or MP3 Navigator screen.
enters standby state and the Standby indicator lights up. Pressing
the switch again to the off position (— Off) shuts down the main
power supply into the DPS-7.3.
• Before turning on the power, make sure all cables are properly
connected.
- Open/Close button [21, 24]
Press to open and close the disc tray.
= Pause button [25, 30]
Press during playback to pause. Press again to resume playback.
~ Stop button [17, 22, 24, 30, 32, 36]
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it stopped.
Pressing twice causes the disc to return to the beginning of the
disc if playback starts again. Whenever a disc is loaded in the
player, indicator above Stop lights up.
2 Standby/On button [16, 17, 21, 24, 41, 59]
When Standby/On button is pressed to On while the Power
switch is set to On, the DPS-7.3 turns on and the Standby
indicator turns off. The indicator around Open/Close button lights
up. Pressing the button again returns the DPS-7.3 to the standby
state. This state turns off the display, disables control functions.
3 Video Circuit Off button and indicator [38]
Press to switch the video signal off.
! Play button [21, 23-26, 28-30, 32, 36]
Press to start or resume playback. Whenever a disc is loaded in
the player, indicator above Play lights up.
4 Last Memory button [36]
@ Dimmer button [40]
You can resume DVD or Video CD playback from the point you
last watched even if the disc is removed from the player. Press
Last Memory during playback to set a Last Memory point. When
you want to resume playback of that disc, press Last Memory in
the stop mode and playback starts from the memorized point.
Last Memory locations can be stored for up to 5 DVDs and 1
Video CD.
Toggle to control the lightness of the display (3 steps).
# Repeat button [28]
Use to set the repeat mode.
$ Random button [29]
Press to play chapters/tracks in random order.
% Remote control sensor [9]
Point the remote control toward the remote sensor to operate the
player.
5 Clear button [27-32, 35-37, 54]
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
6 Sampling Rate indicator [21]
^ Return button [22, 41, 54, 57]
Use to go one menu back (current settings are maintained). Use
Return when you do not want to change the option setting in a
menu.
When playing a disc, the appropreate Sampling Rate indicator
lights up.
& Setup button [17, 41, 59]
7 Disc tray [21]
Press when the player is in either play or stop mode to open and
close the Setup screen.
When loading a disc, place discs in the disc tray with the label
side facing up.
* Display button [39, 40, 50]
8 Top Menu button [22, 26]
Press during playback to display statistical disc information.
Press repeatedly to display different information.
( 4/¢ button [22, 23]
Press to call up the top menu programmed on the DVD.
Depending on the DVD, the top menu may be identical to the
DVD menu.
Press to go back or advance to previous chapters/tracks. Press
9 Cursor (2/3/5/∞) button/Enter button
[17, 21, 22, 27, 29-33, 40, 41, 49, 50, 54, 56, 57, 59]
Use 2/3/5/∞ to move through the options on menu screens and
to change settings. Use Enter to implement settings selected with
the cursor buttons or to set items highlighted in a menu.
and hold to perform fast-reverse/fast-forward playback scanning.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
I Display
1
2
3
4 5 6
7
8
9
0 -
=
~
!
#
@
1 ŸD indicator
8 REPEAT indicator
2 Inserted disc indicator
3 TITLE indicator
9 TOTAL/REMAIN indicator
0 LAST indicator
4 GUI (Graphical User Interface) indicator
- COND indicator
Indicates an on-screen menu operation is being performed. On-
screen menu helps you set up the player.
5 PBC indicator
= PROGRESSIVE indicator
~ DTS indicator
! £/8 indicator
6 CHP/TRACK indicator
@ Multifunctional indicator
7 Angle icon indicator
(e.g. operating status and error messages)
# L, C, R, LFE, LS, S, RS and D.MIX indicator
I Rear panel
1
2
3
4 5
6
7
8
9
0
-
IR
RS-232
OUT
AC INLET
ANALOG OUTPUT
CH 2 FRONT SURR
DIGITAL OUTPUT
OPTICAL
COAXIAL
VIDEO OUTPUT
PR
IN
REMOTE
CONTROL
VIDEO
P
B
CH 1
CENTER
Y
MDVODDAEULDINO/OVI.DDEOPPSL-A7YE.3R
CH1
CH2
L
R
SUB
COMPONENT
S VIDEO
WOOFER
1 IR IN
6 ANALOG OUTPUT CH 1/CH 2 jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier.
If the DPS-7.3 is located inside a rack or cabinet that will not
allow infrared beams to reach the IR sensor, you will need to
connect a remote sensor to IR IN input to be able to use the
7 ANALOG OUTPUT FRONT/SURR/CENTER/
SUBWOOFER jacks [15]
remote controller. Then install the remote sensor in an unblocked
location where you can easily point the remote controller.
2 VIDEO OUTPUT COMPONENT CH 1/CH 2 jacks
[14]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
3 RS-232 port
This port is to be used in conjunction with an external controller to
control the operation of the DPS-7.3 using an external device.
4 VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
Use to output 5.1 channel audio (analog) to the 5.1 channel
discrete inputs on an amplifier. If you are connecting to a receiver
that has both digital and analog input jacks for DVD player
connection, it may be beneficial to make both connections.
8 DIGITAL OUTPUT OPTICAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
9 DIGITAL OUTPUT COAXIAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
5 VIDEO OUTPUT S VIDEO jack [14]
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
0 z jack [15]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
- AC INLET [16]
Use to connect the power cord to the wall outlet.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
Remote controller
- FR/FF 1/¡ buttons [23]
OPEN
ON
/CLOSE
During playback of DVD and Video CD, press ¡ to perform fast
forward scanning or 1 to perform fast reverse scanning of DVD
and Video CD. When a CD or MP3 is loaded, audio scanning is
performed.
TV
ON/STANDBY
1
2
4
6
7
@
#
%
&
STANDBY ANGLE
AUDIO SUBTITLE
3
5
$
^
*
LAST M COND.M DIMMER DISPLAY
TOP MENU
MENU
=
Number buttons (1-9, 0, +10)* [21, 22, 26, 30-32, 54, 56, 57]
Use to perform direct title/folder and chapter/track searches, and
to input numerical values.
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
(
8
0
~ RANDOM button [29]
Press to play chapters/tracks in random order.
! REPEAT button [28]
PAUSE
FR
STOP
FF
PLAY
UP
9
-
)
_
DOWN
STEP/SLOW
Use to set the repeat mode.
1
4
7
2
5
8
0
3
6
9
+
@ OPEN/CLOSE 0 button [21, 24]
Press to open or close the disc tray.
# SUBTITLE button [35, 53, 54]
Press repeatedly to select one of the subtitle languages
programmed on a DVD or to turn the subtitles off.
$ AUDIO button [35, 52]
+
-
FUNCTION
M
=
~
¡
™
¢
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
£
∞
!
-
REMOTE CONTROLLER RC 451DV
DVD TV
Press repeatedly to select one of the audio languages
programmed on a DVD.
§
For Video CD, CD and MP3, each press changes the audio
output as follows.
→ Stereo → 1L(Left) → 2/R(Right)
% DISPLAY button [39, 40, 50]
Press during playback to display statistical disc information.
Press repeatedly to display different information.
^ DIMMER button [40]
Toggle to control the lightness of the display.
& MENU button* [22, 27, 34, 35, 53]
Use to display or close the DVD menu or MP3 Navigator screen.
* ENTER button*
1 ON button [16, 17, 21, 42]
Press to switch the player on.
2 STANDBY button [24, 36]
Press to put the player in standby.
3 ANGLE button [34]
[17, 21, 22, 27, 29-33, 41, 49, 50, 54, 56, 57, 59]
Use to implement settings selected with the cursor buttons or to
set items highlighted in a menu.
Some DVDs are recorded with various camera angle playback
options. Press ANGLE repeatedly to display different camera
angles.
( SETUP button* [17, 41, 59]
4 LAST M button [36]
Press when the player is in either play or stop mode to open and
close the Setup screen.
) PLAY £ [21, 23-26, 28-30, 32, 36]
Press to start or resume playback.
_ UP/DOWN 4/¢ [22, 23]
During playback, press 4 to go back to a previous chapter/track
and ¢ to advance to the next chapter/track .
+ STEP/SLOW +/– buttons [25]
You can resume DVD or Video CD playback from the point you
last watched even if the disc is removed from the player. Press
LAST M during playback to set a Last Memory point. When you
want to resume playback of that disc, press LAST M in the stop
mode and playback starts from the memorized point. Last Memory
locations can be stored for up to 5 DVDs and 1 Video CD.
5 COND. M button [37]
You can store in memory the settings for up to 15 DVDs. Press
COND. M during DVD playback to memorize the settings.
6 TOP MENU button* [22, 26]
Press STEP/SLOW + or – during playback to view still frame.
Press and hold STEP/SLOW + or – during playback to view slow
playback. In still frame, press STEP/SLOW + to advance DVDs
and Video CDs frame by frame and STEP/SLOW – to back up a
few frames at a time (DVD only).
Press to call up the top menu programmed on the DVD.
Depending on the DVD, the top menu may be identical to the DVD
menu.
¡ FUNCTION M button [59]
7 Cursor buttons (2/3/5/∞)* [17, 21, 22, 27, 30-33, 40, 41]
Use to move through the options on menu screens and to change
settings.
CH +/–, VOL +/– buttons [60]
8 RETURN button* [22, 41, 54, 57]
You can store in memory up to 5 settings. Press FUNCTION M to
memorize and recall the settings.
™ CLEAR button [27-32, 35-37, 54]
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
£ SEARCH button [26]
Press to perform a title/folder, chapter/track or elapsed time search.
¢ PROGRAM button [27, 30-33]
Use to go one menu back (current settings are maintained). Use
RETURN when you do not want to change the option setting in a
menu.
TV/VCR button [60]
You can program titles, chapters, or tracks to play back in a
desired order. Programs can be a maximum of 24 steps.
Additionally, DVD programs for up to 24 discs can be stored in
the player’s memory for future use.
9 PAUSE 8 button [25]
Press to pause playback of a disc. Press again to resume
playback.
0 STOP 7 button [17, 22, 30, 32, 36]
∞ A-B button [28]
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it was
stopped. Pressing twice causes the disc to return to the beginning
of the disc when playback starts again.
Press at the beginning and end of the section you want to repeat
or to mark a location you want to return to.
§ DVD/TV switch [60]
(Buttons indicated with * are used for menu operation.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting
Connecting to a TV
Before connecting
Incomplete
• Refer also to the instruction manual of the TV.
• Connect the plugs securely.
• When you connect the DVD Player to the TV, be sure to turn off the
power and unplug both units from the mains before making any
connections.
• Connect the DVD Player to the TV directly. If you connect the DVD
Player to a VCR, TV/VCR combination, or video selector, the playback
picture may be distorted as DVD videos are copy protected.
• When this DVD player is connected to a TV compatible with
progressive signal using the VIDEO OUTPUT COMPONENT jacks, the
video output to “Progressive” (see page 48) will produce a higher
quality picture.
Insert completely
Making component video connections
If the TV or monitor has component video inputs, making
this type of video connection will produce the ideal picture
quality for the presentation of DVD-Video. Using a
component video cable (sold separately), connect the
VIDEO OUTPUT COMPONENT CH 1 or CH 2 jacks to the
corresponding component video input jacks on the TV.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y,
CB, CR)
BE sure to set the TV Aspect after connection using
the Setup Navigator explained in “Setting Up the
Player” starting on page 17 or the function setting
menu explained in “Adjusting Audio and Video
Settings” starting on page 41.
Component video cable
To component video input
In some TVs or monitors, the color levels of the playback
picture may be reduced slightly or the tint may change. In
such a case, adjust the TV or monitor for optimum
performance.
By making connections to a stereo system, you can improve
the quality of the sound. Using an audio cable (not
supplied), make audio connections from the ANALOG
OUTPUT CH 1 or CH 2 L and R jacks to the corresponding
jacks on the stereo component.
Stereo audio connection cable
To audio input
L (White)
R (Red)
: Signal flow
IR
RS-232
OUT
IN
AC INLET
ANALOG OUTPUT
CH 2 FRONT SURR
DIGITAL OUTPUT
OPTICAL
COAXIAL
VIDEO OUTPUT
PR
REMOTE
CONTROL
VIDEO
P
B
CH 1
CENTER
Y
MDVODDAEULDINO/OVI.DDEOPPSL-A7YE.3R
CH1
CH2
L
DO NOT connect
the mains lead at
this time.
R
SUB
COMPONENT
S VIDEO
WOOFER
Jacks for video
connections
Jacks for audio
connections
Making S-video connections
If the TV or monitor has an S video input, make the S video
connection. The S video connection will provide higher
quality picture playback.
Stereo audio connection cable
To audio input
R (Red)
By making connections to a stereo system, you can
improve the quality of the sound. Using an audio cable (not
supplied), make audio connections from the ANALOG
OUTPUT CH 1 or CH 2 L and R jacks to the corresponding
jacks on the stereo component.
L (White)
S video connection cable
To S video input
Note
• If the TV audio is monaural, leave the red plug disconnected.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
Using the supplied audio/video connection
cable
BE sure to set the TV Aspect after connection using
the Setup Navigator explained in “Setting Up the
Player” starting on page 17 or the function setting
menu explained in “Adjusting Audio and Video
Settings” starting on page 41.
Using the supplied audio/video cable, make audio
connections from the ANALOG OUTPUT CH 1 or CH 2 L
and R jacks to the corresponding audio input jacks on the
TV. In the same manner, make video connection from the
VIDEO OUTPUT VIDEO jack to the corresponding video
input jack on the TV.
By making connections to a stereo system, you can
improve the quality of the sound. Using an audio cable (not
supplied), make audio connections from the ANALOG
OUTPUT CH 1 or CH 2 L and R jacks to the corresponding
jacks on the stereo component.
Note
Be sure to match the colors of the plugs on the cable with the
corresponding jacks on the DVD Player and the TV: yellow for
video, red for R (right) audio and white for L (left) audio.
Stereo audio/video connection cable
To audio/video input
Video
(Yellow)
L (White)
R (Red)
: Signal flow
IR
RS-232
OUT
IN
AC INLET
ANALOG OUTPUT
CH 2 FRONT SURR
DIGITAL OUTPUT
VIDEO OUTPUT
PR
REMOTE
CONTROL
VIDEO
P
B
CH 1
CENTER
Y
OPTICAL
COAXIAL
MDVODDAEULDINO/OVI.DDEOPPSL-A7YE.3R
CH1
CH2
L
DO NOT connect
the mains lead at
this time.
R
SUB
COMPONENT
S VIDEO
WOOFER
Jacks for video
connections
Jacks for audio
connections
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Amplifier
(To Enjoy the Sound Advantage of the DVD Player)
Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 13 and 14, connecting
with an amplifier provides you high quality dynamic sounds.
Notes
Before connecting
• The remote controller supplied with Integra/ONKYO amplifier can
be used to operate the DVD player.
• The function of the upper and lower z connectors are the same.
Connect to either one.
• Connecting z cable only does not make the system operational.
You must also connect the audio cables as well.
• When using the optical input jack, remove the
protective cap and keep it safely. When the
• Refer to the instruction manual of the amplifier.
• When you connect the DVD Player to the amplifier, be sure to turn off
the power and unplug both units from the mains before making any
connections. Otherwise, the speakers may be damaged.
• Connect the plugs securely.
Incomplete
jack is not used, replace the protective cap.
• This player uses parts which are sensitive to
heat. Do not set this player on top of an
amplifier or other product which emits heat.
Insert completely
Making discrete 5.1 channel ANALOG
OUTPUT connections
The discrete ANALOG OUTPUT jacks are intended to deliver
up to 5.1 channels of multi channel audio from DVD-Video and
DVD-Audio sources. Connections can be made from the
ANALOG OUTPUT FRONT, SURR (surround), CENTER, and
SUBWOOFER jacks to the corresponding input jacks on an AV
component with multi channel discrete audio input jacks.
BE sure to set the digital output setting after
connection using the Setup Navigator explained in
“Setting Up the Player” starting on page 17 or the
function setting menu explained in “Adjusting
Audio and Video Settings” starting on page 41.
Note
To ensure proper delivery of sound, be sure to match the names of
the jacks on the DVD Player and the component being connected to.
Audio connection cables
To audio inputs
FRONT L
FRONT R
SURROUND L
SURROUND R
CENTER
SUBWOOFER
An amplifier with 5.1
channel discrete input
z cable
To z jack
: Signal flow
IR
RS-232
OUT
IN
AC INLET
ANALOG OUTPUT
CH 2 FRONT SURR
DIGITAL OUTPUT
VIDEO OUTPUT
PR
REMOTE
CONTROL
VIDEO
P
B
CH 1
CENTER
Y
OPTICAL
COAXIAL
MDVODDAEULDINO/OVI.DDEOPPSL-A7YE.3R
CH1
CH2
L
DO NOT connect
the mains lead at
this time.
R
SUB
COMPONENT
S VIDEO
WOOFER
z cable
To z jack
I Making a digital connection with the
amplifier
Coaxial connection cable
To digital coaxial jack
If your amplifier has a digital input jack, be sure to connect
it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack
on the DVD player.
An amplifier with a Dolby
Digital/DTS/MPEG1/MPEG2
decoder
Optical fiber connection cable
To digital optical jack
Note
DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital
receiver) which is reserved only for video disc players.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Player
Connecting the Power/Turning on the DVD Player
Before connecting
• The DPS-7.3 is shipped with the main power (Power)
switch in the on position (_ On). When the power cord is
plugged in for the first time, the DPS-7.3 will automatically
enter the standby state and the Standby indicator will light
(same condition after step 2 below).
• Make sure that all the connections on pages 13-15 are complete
(the connection to a TV is required).
Plug the supplied power cord into
1
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DPS-7.3. The
power cord supplied is designed for use
with the DPS-7.3 and should not be
used with any other device.
• Never have the power cord
disconnected from the DPS-7.3 while
the other end is plugged into the wall
outlet. Doing so may cause an electric
shock. Always connect by plugging into
the wall outlet last and disconnect by
unplugging from the wall outlet first.
AC INLET
To the mains
Power
Press Power to switch on the main
2
power.
The DVD Player enters standby mode.
The Standby indicator lights up.
• The buttons on the remote controller do
not operate if the Power switch is set to
Off.
• To switch off the main power, press
Power again.
Standby/On
Press Standby/On on the DVD
3
Player or ON on the remote
controller.
The DVD Player turns on and the Standby
indicator turns off.
• To put the DVD Player in the standby
mode, press Standby/On on the DVD
Player, or STANDBY on the remote
controller. Be sure to set the volume to
minimum before putting the DVD Player
in the standby mode for the next use to
avoid sudden loud sound reproduction.
• While the Standby indicator lights up,
the DVD Player can receive signals from
the remote controller. However, if you
press Power on the DVD Player to
switch off the main power, the remote
controller cannot be used to turn on the
DVD Player.
• Setting the Standby button to standby
does not shut off the power completely.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
/CLOSE
ON
TV
ON/STANDBY
ON
STANDBY ANGLE
AUDIO SUBTITLE
LAST M COND.M DIMMER DISPLAY
Setting Up the Player
TOP MENU
MENU
5/∞
-
+
CH
CH
+
VOL
ENTER
SETUP
ENTER
The Setup Navigator has been designed to simplify the
process of getting the DVD player ready to perform.
Designed as a series of on-screen multiple-choice
questions, the Setup Navigator automatically sets the
audio, video, and language settings according to how
the questions are answered. Once this procedure is
complete, it will be possible to begin using the DVD
player to enjoy DVDs.
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
7
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
The procedure on this page describes the operations
necessary to function within the Setup Navigator
screens. A detailed description of the contents of each
question that appears on the screen can be found on
the following pages.
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
Using the Setup Navigator
This function cannot be used during playback.
I When setting up for the first time
Some DVDs start playing automatically when loaded in the
player. Because the Setup Navigator cannot be used if a disc
is playing, it is recommended to set up the player using the
Setup Navigator before loading a DVD for the first time. If a
DVD has been loaded, be sure to press 7 before proceeding.
ON
Press ON (Standby/On on the
1
remote controller or the front
panel).
If there’s already a disc loaded and it starts
to play, press 7 to stop it.
I To change the answer to a prior question
Use the cursor button (2) to return to previous screens.
Please note, however, that you cannot go forward using the
cursor button (3), so it will be necessary to answer all the
questions that occur after the screen that was returned to.
Press SETUP.
When SETUP is pressed for the first time,
the following screen appears. Though the
Setup Navigator may be used more than
once, this screen only appears the first
time SETUP is pressed.
SETUP
2
I To exit the Setup Navigator
Press SETUP while on any of the screens to exit the Setup
Navigator. Please note that if the Setup Navigator is exited
before all the questions are answered, no settings are
changed.
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Setup Navigator
Start
Auto Start Off
Note
Setup using the Setup Navigator
On-screen information ( ) appears to clarify the functions and
i
explain the options available.
ENTER
SETUP
Move
Select
Exit
Use the cursor buttons (5/∞) to
3
4
make a selection.
• If you are going to use the Setup
Navigator, it is not necessary to change
the setting on the first screen. Please
proceed to the next step.
• If you do not want to set up the player
using the Setup Navigator, use the
cursor button (∞) to select [Auto Start
Off] at this time.
The Setup Navigator function may still
be used at a later time in manual Setup
screen menu operation (page 42).
Press ENTER.
The selection is entered and the next
Setup Navigator screen appears.
ENTER
Use steps 3 and 4 as a basis for entering
selections on the all of the Setup Navigator
screens described on the following pages.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Player
Using the Setup Navigator
I Setting the OSD Language
I Setting the type of analog audio
(On-Screen Display Language)
connections
The [OSD Language] screen establishes the OSD language,
or on-screen display language, which refers to the language
that is used by the player in menus and
The [Amp Connection] screen establishes the type of analog
audio connection you made to your amplifier/receiver.
Audio1
V2 Language
General
A2 Video1
Setup Navigator
on-screen messages. Additionally, the language that is
established at this setting will also be used for the default
audio and subtitle language.
2 ChannelDolby Digital/DTS
5.1Channel
Amp Connection
Analog Jacks
Not Connected
Audio1
V2 Language
General
A2 Video1
2channel jacks for L/R
Setup Navigator
English
français
Deutsch
ENTER
SETUP
Move
Select
Exit
Language
Settings: 2 Channel (Factory setting)
5.1Channel
Italiano
Español
OSD Language
Select the On Screen Language
Not Connected
ENTER
SETUP
Move
Select
Exit
If you select [5.1 channel] audio connection, confirm which
speakers are connected to your amplifier.
Settings: English (Factory setting)
français
Deutsch
Italiano
Español
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Amp Connection
Center Speaker
PresentDolby Digital/DTS
Not Present
Notes
• The languages that can be selected may be different from those
shown above.
Center speaker is connected
to an amplifier
ENTER
SETUP
Move
Select
Exit
• In addition to setting the [OSD Language], the audio and subtitle
language are also set at this time. If you wish to change the
audio or subtitle language to a different language, make changes
in the Setup screen Language menu [Audio Language] and
[Subtitle Language] as needed (pages 52, 53).
Audio1 A2 Video1 V2 Language General
Setup Navigator
Amp Connection
Surround Speakers
PresentDolby Digital/DTS
Not Present
I Setting the TV screen size
Surround speakers are connected
to an amplifier
The [TV Type] screen establishes the size, or more
appropriately the width to height ration of your television or
monitor. The width-to-height ratio of conventional TVs is 4:3,
while the width-to-height ratio of wide screen and high-
definition TVs is 16:9. This width-to-height ratio is called the
aspect ratio.
ENTER
SETUP
Move
Select
Exit
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Amp Connection
Sub–woofer
PresentDolby Digital/DTS
Not Present
Audio1
V2 Language
General
A2 Video1
Sub–woofer is connected
to an amplifier
Setup Navigator
ENTER
SETUP
Move
Select
Exit
TV Connection
TV Type
Widescreen(16:9)
Standard(4:3)
Note
If you connected the audio output directly to your TV, choose [2
Channel].
Widescreen TV
16:9 aspect raito
ENTER
SETUP
Move
Select
Exit
Settings: Widescreen (16:9) (Factory setting)
Standard (4:3)
Note
There are two screen formats that can be used to display
wide-screen format DVDs: letter box and pan & scan. When
[Standard (4:3)] is selected in the Setup Navigator, the letter box
screen format is automatically selected. To switch the preference to
the pan & scan format, make changes in the Setup screen Video 1
menu [TV Screen] setting (page 47).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
I Setting digital audio connections to an AV
I Confirming the settings
amplifier or decoder
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier, receiver, or
external decoder. As there are numerous options available,
please refer to the instructions supplied with the component
the player is connected to determine what digital audio
formats can be decoded. If you have made no digital
connections, select [Not Connected].
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Save Changes
Exit Setup Navigator
Changes are saved
Move
Delete Changes
Start Again
ENTER
SETUP
Select
Exit
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Dolby Digital
Settings: Save Changes (Factory setting)
Select to have the player make all of the necessary
audio, video and language settings according to
your responses in the Setup Navigator.
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Amp Connection
Digital Jack
Not Connected
Compatible with Dolby Digital
Delete Changes
ENTER
SETUP
Move
Select
Exit
Select to exit the Setup Navigator without changing
any of the system settings.
Settings: Dolby Digital (Factory setting)
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Start Again
Select to return to the [OSD Language] screen of
the Setup Navigator and do the settings again.
Not Connected
I To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup screen
menus is described on page 41.
Warning
• Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/
MPEG] if the amplifier does not have a DTS decoder. If you do
so, high volume sound may be output and damage your hearing
as well as speakers.
• Select [PCM] when you connect the player to a 2 channel digital
stereo amplifier. If you select other than [PCM], high volume
sound may be output and damage your hearing as well as
speakers.
I Setting compatibility with 96 kHz output
The [96 kHz PCM Audio] screen establishes whether or not
the AV component the player is connected to is capable of
processing an audio signal with a sampling rate of 96 kHz.
This screen only appears if connections have been made to
an external AV component as determined in previous screens.
Audio1
V2 Language
General
A2 Video1
Setup Navigator
Amp Connection
No
96kHz PCM Audio
Yes
Don't Know
Digital jack not compatible with 96kHz
ENTER
SETUP
Move
Select
Exit
Settings: No (Factory setting)
Select if the connected AV component cannot
process an audio signal with a sampling rate of 96
kHz.
Yes
Select if the connected AV component can process
an audio signal with a sampling rate of 96 kHz.
Don’t Know
Select if you are uncertain whether the connected
AV component can process an audio signal with a
sampling rate of 96 kHz.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Player
Various sound formats and sound effects
Minimum speaker configuration for
DTS/Dolby Digital/MPEG2 surround sounds
Subwoofer
Left front
speaker
Right
front
speaker
Center
Speaker
Left
surround
speaker
Right
surround
speaker
The 5.1-channel digital surround format of DOLBY DIGITAL/
DTS/MPEG2 enables you to individually play five full-range
(20 Hz-20 kHz) channels (left and right front, center, two
surround channels) plus an LFE (Low Frequency Effect)
channel for the low-range effect sound. It will create a realistic
sound as heard in theaters and concert halls.
DOLBY DIGITAL Surround
DVD Video that have the
system.
mark are recorded using this
mark are recorded using this
mark are recorded using
D
I
G
I
T
A
L
DTS Surround
DVD Video and CD that have the
system.
MPEG2
DVD Video that have the
this system. MPEG2 may have 8 channels. In this case, left and right
center speakers in addition to the above speaker configuration are
used.
DOLBY PRO LOGIC Surround
This surround format consists of 4 channels (left and right front,
center, and monaural surround channel) and emphasizes the center
channel. This format is very effective for panning music,
conversation, and three-dimensional sound movement output from
three front channels. It also simulates the atmosphere and surround
effects of the sound reflected from the side and rear walls of the
theater.
DVD Video that have the
this system.
mark are recorded using
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
Basic Playback
TV
ON/STANDBY
ON
0
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Getting Started Using Your DVD Player
-
+
CH
CH
+
VOL
ENTER
ENTER
2/3/5/∞
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the next section to set up
the player to correspond to your home system. Having
made these settings, you are now ready to start using
the player to enjoy DVDs, Video CDs, CDs and MP3s.
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
Number
buttons
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
VCD
CD
MP3
Playing DVDs, Video CDs, CDs and MP3s
ON
Press ON (Standby/On on the front
panel).
Select the item you want to view.
• When a DVD is loaded:
5
1
Select the item with the cursor buttons
(2/3/5/∞) or the number buttons then
press ENTER.
OPEN
/CLOSE
Press 0.
The disc tray comes out.
• When a Video CD is loaded:
2
ENTER
Use the number buttons to select the
item.
Load a disc.
3
1
4
7
2
5
8
3
6
9
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
+
10
0
Notes
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder. Check
that the digital audio output format selected in the
Audio menu corresponds to the audio components you have
made connections to (pages 19, 43, 44).
• The TV screen size is factory set to present the wide screen
format (16:9 aspect ratio). If you have a standard TV screen (4:3
aspect ratio), this setting can be changed to match your TV
screen size in the Video 1 menu (pages 18, 47).
• Do not move the DVD Player during playback. Doing so may
damage the disc.
• Use 0 on the remote controller or DVD Player to open and close
the disc tray. Do not touch the disc tray while it is moving. Doing
so may cause the DVD Player to malfunction.
PLAY
Press £.
• The disc tray closes, and playback
4
begins.
• The appropriate audio sampling rate
indicator lights.
• MP3 only: It may take a few seconds for
the player to locate the track on the
disc, depending on the complexity of
the file structure. During this time,
“Please wait a moment” is displayed.
• Do not press down on the disc tray or put any objects other than
playable discs on the disc tray. Doing so may cause the DVD
Player to malfunction.
• In many instances, a menu screen appears when playback of a
movie is complete. Prolonged display of an on-screen menu may
damage your television set, permanently etching that image onto
its screen. To avoid this, be sure to press 7 once the movie is
complete.
• Depending on the disc, a menu may be
displayed. If a menu is displayed,
proceed to step 5.
MP3
MP3 playback
Please see “MP3” compatibility information” (page 7) for more
information on MP3 playback.
I When an operation is prohibited
VCD
CD
MP3
DVD
DVD-A
DVD-V
There are times when you are using the player and attempt to
perform an operation, but for some reason it cannot be
performed. When this occurs, one of the two following icons
appears on the screen.
I About the
,
,
,
,
and
marks in the pages related to disc operation
DVD
means the function or title is related to both DVD-Video and
DVD-Audio operation.
The operation is prohibited by the player.
DVD-V
DVD-A
VCD
CD
means the function or title is related to DVD-Video operation.
means the function or title is related to DVD-Audio operation.
means the function or title is related to Video CD operation.
means the function or title is related to audio CD operation.
means the function or title is related to MP3 operation.
The operation is prohibited by the programming on the
disc.
MP3
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started Using Your DVD Player
DVD
DVD
VCD
VCD
When a Menu Screen is Displayed
To Open or Return To the DVD or Video
CD Menu Screen
Although this differs depending on the disc, pressing MENU,
TOP MENU, or RETURN during DVD playback or RETURN
during Video CD playback displays the menu screen. Refer to
the DVD or Video CD disc jacket and accompanying
documentation for more information.
Menu screens are displayed for DVDs that have menu
screens or Video CDs that include Playback Control (PBC).
DVDs often contain extra information that can be accessed in
the DVD menu and sometimes makes navigating DVD menu
screens as enjoyable as watching the feature presentation.
Example: When a DVD that has menu screens is loaded
I To play Video CDs without displaying menu
1 Highlight Clips
2 Chapter List
screens
3 Commercial Header
4 Subtitles
5 Soundtrack
Video CDs with Playback Control (PBC) display a menu
screen when play is started. It is possible, however, to play
back Video CDs without displaying menu screens.
When a Video CD with PBC is loaded, press 7, and then the
number button of the track you want to play.
6 Start Main Feature
Example: When a Video CD that has Playback Control is
loaded
STANDARD VOCAL BEST
1
2
3
4
5
6
7
8
Don't Tekno for an Answer
Bad Whack Naff Riff
dubmyheadbassman
Gooey Love Jingle
Praise the Day
Bertie B.& the Goans
Hood in the Boyz
Sleek Machine
Philip William
Formerly an Artist
Pfeuti
DVD
When screen saver appears
G3, Ba-san
During disc playback, when the disc is paused, a screen saver
appears after a fixed period. Press 8 or £ to resume playback.
(Alternately, the unit can be programmed to turn off at this time
(page 48).)
Abstract Jazz Phunk
Rock the Love Jive
John Torn
Hot Monkey Stick
I To navigate a menu screen
CD’s may be played with TV screen on or off.
• Although individual DVD titles may differ, when a menu
screen is displayed, use the cursor buttons (2/3/5/∞) and
ENTER on the remote control. The cursor buttons are used
to move around the options on the screen and ENTER is
used for selection.
• Occasionally, the number buttons may also be used to
make selections. If this is possible, using number buttons
serves to directly select an option on a menu screen. Only
number buttons are used to make selections on Video CD
menu screens.
• When the Video CD has more than one menu, pages can
be advanced to or returned to with 4 or ¢.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
MENU
ENTER
TOP MENU
2/3/5/∞
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
RETURN
PAUSE
FR
STOP
FF
PLAY
UP
£
4/¢
DOWN
1/¡
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
DVD
VCD
CD
MP3
VCD
CD
MP3
Chapter (Track) Skip Forward/Skip
Back
Forward and Reverse Scanning
Fast forward and reverse scanning
FR
FF
Advancing to the next chapter (track)
Press and hold ¡ or 1 during
playback to scan forwards or
backwards.
While “¡ 1” or “1 1” is displayed on-
screen blinking, release the button to
resume normal playback.
UP
Press ¢.
Press to skip forward to the next chapter
(track).
Skipping back to the previous chapter
(track)
DOWN
Variable speed scanning
Press 4.
• Press once to skip back to the start of
1 Press (but don’t hold) ¡ or 1
during playback to start scanning.
the chapter (track) currently playing.
“¡ 1” or “1 1” appears on screen.
• Press twice to skip back to the start of
2 Depending on the type of disc
playing, you can increase the
scanning speed by pressing ¡
or 1.
the previous chapter (track).
The scan speed is shown on-screen.
DVD-Video discs have three scanning
speeds;
1, 2 and 3.
DVD-Audio discs have two scanning
speeds;
2 and 3.
CD and Video CDs have two scanning
speeds;
1 and 2.
MP3 have only one scanning speed.
3 Press £ to resume normal
playback.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
0
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
Getting Started Using Your DVD Player
T
O
P
M
E
N
U
M
E
N
U
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
£
7
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
VCD
VCD
CD
MP3
DVD-V
Resuming playback from where you
stopped
Stopping playback and switching to
standby mode
Use the resume feature to restart playback from the point that
the disc was stopped last time.
This features cannot be used with DVD Audio discs, MP3s
and CDs.
STOP
Press 7.
Playback stops.
1
STOP
Press 7 once.
1
OPEN
The display shows “RESUME” and the
stop position is memorized.
/CLOSE
Press 0.
The disc tray comes out.
2
• The resume position remains
memorized as long as the disc is in the
player — even if you switch the power
off.
Remove the disc.
• Pressing 7 twice causes the disc to
return to the beginning when £ is
pressed again. The display shows the
disc type (DVDs or Video CDs).
3
PLAY
Press £.
2
Playback starts from the resume position.
STANDBY
Press STANDBY (Standby/On on
4
the front panel ).
The disc tray goes back in.
Notes
• The actual restart position may be slightly before or after the
resume position.
• If you want to remove the disc, but still want to resume playback
from the last stopped position, use the LAST MEMORY feature
instead (page 36).
• The memorized resume position is erased when you open the
disc tray, or change the Parental Lock Level setting (page 56) or
On-screen Display (OSD) setting (page 52).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
Advanced Playback
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Still Frame/Slow Play
The video images on DVD and Video CD can be viewed
as a still frame, played back at slow speeds and even
advanced frame by frame.
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
8
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
STEP/SLOW +/–
-
FUNCTION
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
DVD
VCD
VCD
Viewing a still frame
Viewing slow playback
You can’t use slow reverse play with Video CDs.
PAUSE
Press 8, STEP/SLOW +/–.
When viewing a DVD, if the paused picture
shakes, select the [Field] setting in the
Setup screen Video 2 menu [Still Picture]
setting as described in the section on page
51.
STEP/SLOW
During playback, press and hold
1
2
STEP/SLOW +/– during playback.
+
STEP/SLOW
-
+
-
During slow playback, press STEP/
SLOW +/– repeatedly to change the
slow-motion speed.
There are four forward slow-motion play
speeds:
STEP/SLOW
+
I Frame by frame advance playback:Viewing
one frame at a time
You can’t use frame review with Video CDs.
-
3 1/16
3 1/8
1 Press 8, STEP/SLOW +/–.
1/2 2
1/4 2
2 Press STEP/SLOW +/–.
There are two reverse slow-motion play
speeds:
STEP/SLOW +: The picture advances one frame each
time the button is pressed.
Slow 1 ↔ Slow 2
STEP/SLOW –: The picture backs up a DVD a few frames each
time the button is pressed.
I To control still pictures
DVD-Audio may inclide still pictures, which are classfied into two
large groups.
I To return to normal playback
When viewing a slow playback, pressing £ restores normal
playback operation.
Slideshow:
Still pictures appear on after another
automatically consistent with the disc program.
Browsable pictures: You can display your favorite still picture
selected with the buttons on the remote control.
Press STEP/SLOW +/– to select a picture. (The order of
pictures vary depending on the disc.)
I To return to normal playback
When viewing a still frame playback, pressing 8 or £ restores
normal playback operation.
Notes
• There is no sound when viewing still frames or slow playback, or
when advancing one frame at a time.
• Still frame, slow play, or frame advance playback may not be
possible with certain titles. In this case, the
mark is displayed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a Specific Title/Group/Folder/
Chapter/Track/Location
DVD
VCD
CD
MP3
Searching for a Title, Group, Folder, Chapter,Track, or Location on a Disc
This player offers different ways of accessing the information
on a DVD, Video CD, CD or MP3. Using SEARCH, you can
search for titles or chapters on a DVD-Video, groups or tracks
on a DVD-Audio, tracks on a Video CD, CD or folders or
tracks on a MP3 and even select the point in time to start
playback.
PLAY
Press £.
Playback of the selected title, folder,
chapter or track starts. When a time search
is performed, playback begins at the
appointed time.
3
SEARCH
Press SEARCH repeatedly to select
the type of search.
1
Notes
The type of search changes which each
press as follows.
DVD-Video
• For some discs, selection can be made using the top menu on the
DVD. In this case, press TOP MENU to display the menu screen
and then make your selection.
• With some DVDs, the search operation may not be possible and
may stop shortly after being performed. In this case, the
is displayed.
3 Title
3 Chapter
Time 2
mark
Off 2
• Time search is not possible with DVD-Audio, CDs and MP3s.
• When performing DVD or Video CD time search, playback may
start from a slightly different time than that specified.
• Time search is not possible during when the disc is stopped.
• Search using time search is not possible during PBC playback of
Video CDs.
DVD-Audio
3 Group
3 Track
Page* 2
Off 2
Video CD
3 Track
3 Time
Off 2
I To perform a direct title or chapter/track
CD
search using the number buttons
• Press the number buttons while the disc is stopped to
select a title or track number.
• Press the number buttons while the disc is playing to select
a chapter or track number.
3 Track
3 Off
MP3
3 Folder
3 Track
Off 2
• To select number 3, press 3.
• To select number 10, press 1 and 0.
• To select number 37, press +10, +10, +10 and 7.
* DVD-Audio discs with brousable
pictures only.
I Playing bonus groups of DVD-Audio
Press the number button(s) of the
desired title, group, chapter or track
or of the specific time where you
would like to begin playback.
Some DVD-Audio may include an extra content called “Bonus
Group”.
If you select it to play, a display appears to enter a key
number. Press the number buttons on the remote control to
enter the key number.
When the number is entered correctly, playback of the bonus
group starts.
To get key numbers, refer to instruction note of discs.
2
1
2
5
8
0
3
6
9
4
7
• To select number 3, press 3.
• To select number 10, press 1 and 0.
• To select number 87, press 8 and 7.
+
10
When performing a time search:
Note
• A key number may be called in some cases such as when
removing the disc. Enter the key number again if necessary.
• When you use a bonus group in a programmed play such as
memory playback, enter the key number beforehand.
• To select 21 minutes, 43 seconds,
press 2, 1, 4, and 3.
• To select 1 hour, 14 minutes, press 7, 4,
0, and 0.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
MENU
ENTER
TOP MENU
2/3/5/∞
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
Number
buttons
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
SEARCH
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
MP3
Using the MP3 Navigator
Use the MP3 Navigator to make searching for the track(s) you
want to play easier. You can also use it to add or clear tracks
from the program list.
I Navigate using the following controls:
Cursor buttons (2/3) Select folder and tracks from the
current screen.
Cursor buttons (5/∞) Select the previous/next of folders
and tracks. To move rapidly up or
down a long list of folders or tracks,
press and hold the Cursor buttons
(5/∞).
Load a CD-ROM containing MP3
1
tracks.
MENU
Press MENU to enter the MP3
Navigator screen.
The left side of the screen shows a list of
folders containing MP3 tracks.
Total number of Track
2
ENTER
Play the currently selected folder or
track. MP3 tracks that are unplayable
on this system are automatically
skipped and the display shows
“UNPLAYABLE MP3 FORMAT”.
MP3 Navigator
Current :
3
1-1
Folder
Track
1.TRACK1~1
2.TRACK2~2
3.TRACK3~3
4.TRACK4~4
1.FOLDER~1
2.FOLDER~2
3.FOLDER~3
4.FOLDER~4
5.FOLDER~5
6.FOLDER~6
MENU
Exit the MP3 Navigator
PROGRAM
Add the currently selected track to
the program list. (Tracks in the
program list are marked .)
Pressing PROGRAM repeatedly will
add the track to the program list
repeatedly.
ENTER
MENU
Play
Exit
Total number of Folder
If you display the MP3 Navigator when a
disc is playing, the currently playing folder
and track numbers are shown at the top
left of the screen.
See ‘Programming MP3s’ on page 31
for how to use program play.
CLEAR
Clear the currently selected track
from the program list.
On the right side is a list of MP3 tracks
from the first title in the list.
MP3 Navigator
1~4
Current :
1~10
3
1-1
Folder
Track
1.FOLDER~1
2.FOLDER~2
3.FOLDER~3
4.FOLDER~4
5.FOLDER~5
6.FOLDER~6
1.TRACK1~1
2.TRACK2~2
3.TRACK3~3
4.TRACK4~4
CLEAR
ENTER
MENU
Del PGM
Play
Exit
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Repeat Play
You can repeat an entire title, group, folder, chapter or
track, or just a part.
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
CLEAR
A-B
-
RANDOM REPEAT
A
B
PROGRAM
REPEAT
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
DVD
VCD
CD
MP3
VCD
CD
Repeating aTitle, Group, Folder,
Chapter or Track
Repeating a Specific Segment
-
A B
Repeat play of a specified section
REPEAT
Repeat play of a chapter/track
Press A–B at the beginning and end
of the section you want to repeat.
Press REPEAT once during
playback of the chapter or track you
want to repeat.
• When A–B is pressed a second time,
the disc returns to the location where A–
B was pressed first and plays the
selected section repeatedly.
Repeat play of a title/group/folder
Press REPEAT twice during
playback of the title you want to
repeat.
• You can only perform A–B repeat within
the same title, chapter, or track.
-
A B
Return to a specified location on a disc
Repeat play of a disc
1 Press A–B at the desired
VCD
CD
location.
Press REPEAT twice during
playback of the disc you want to
repeat.
2 When you want to return to the
specified location, press £.
MP3
Press REPEAT three times during
playback of the disc you want to
repeat.
I To cancel A–B repeat play
Press CLEAR. Playback continues, but the repeat function is
canceled.
I To clear the specified location
Press CLEAR to cancel repeat play or to clear the specified
I To repeat a program
Press REPEAT once during program playback to repeat the
program.
location that was set using A–B.
Notes
• With some DVD discs, there may be times when repeat playback
I To cancel repeat play
Press CLEAR. Playback continues, but the repeat function is
canceled.
is not possible. In these cases, the
screen.
mark will appear on the
• With Video CDs, repeat play is not possible when the menu is
displayed (PBC playback). To perform repeat play, start playback
without displaying a menu by pressing the track number to be
repeated when the disc is stopped, and then press REPEAT.
• You cannot use A-B repeat when listening to an MP3.
• If you switch camera angle during repeat play, repeat play is
cancelled.
• You cannot use repeat play while using MP3 navigator.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Random Play
Play titles, groups, chapters, or tracks on a disc in
random order.
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
4/¢
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
CLEAR
-
B
RANDOM REPEAT
A
PROGRAM
RANDOM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
VCD
CD
MP3
Playing in Random Order
I To change titles, chapters, or tracks during
RANDOM
Random playback of chapters within
one title or tracks within one group
random play
• Press ¢ or RANDOM and the next randomly selected
title, chapter, or track starts playing.
• Press 4 and playback of the current title, chapter, or track
starts again from the beginning.
Press RANDOM once.
“Random Chapter” appears on the screen,
and chapters within the title will be played
back in random order.
I To stop random play
Random playback of titles or groups
Press CLEAR. This returns you to normal playback of
chapters/tracks in order from the chapter/track currently
playing.
Press RANDOM twice.
“Random Title” appears on the screen, and
titles will be played back in random order.
Notes
Random playback of tracks
• With Video CDs, random play is not possible during playback
when the menu is displayed (PBC playback). To perform random
play, start playback without displaying a menu by pressing a track
number button while in the stop mode, and then press RANDOM.
• Random play of programmed chapters/tracks is not possible.
• In the case of DVDs, random playback may not be possible with
some discs.
Press RANDOM.
“Random” appears on the screen, and
random playback begins.
• Repeat playback of random playback is not possible. In these
cases, the
mark will appear on the screen.
• You cannot use rondom play while using MP3 navigator.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in a Favorite Order
You can combine your favorite titles, groups, folders,
chapters or tracks and play them in any order.
DVD
Programming DVDs
A program with a maximum of 24 steps can be memorized.
I To program a pause in a program
Press 8 instead of a number button.
PROGRAM
Press PROGRAM.
“8” appears on the screen and the pause can be programmed.
A pause cannot be programmed as the first or last position in a
program, and two or more pauses cannot be programmed in
succession.
1
The Program screen appears.
Program Chapter
Program Title
Program Chapter
Program Title
Title
1
7
Chapter
1
Title
2(/20)
Current:
Title
Current:
(Chapter 1~18)
I To delete a number:
Use the cursor buttons (5/∞/2/3) to highlight the incorrect
Program Memory Off
ENTER
Program Memory Off
ENTER
PROGRAM
Play
PROGRAM Exit
Move
Move
Play
Exit
number and then press CLEAR.
The number is deleted. If the number was before another number,
the later numbers are reordered automatically.
Use the cursor buttons (2/3) to
select either [Program Chapter] or
[Program Title].
2
3
I To insert a number:
Use the cursor buttons (5/∞/2/3) to highlight the number to
be placed after the new number and then press the number
button(s) of the number to be inserted.
Once the program type is selected.
Use the cursor button (∞) to enter
the program window.
The new number is inserted before the previously selected number.
When [Program Chapter] is selected, you
must also select what title the chapters to
be programmed are in. Use the cursor
button (5) to highlight “Title” and then use
the number buttons to enter the title
number to be used.
I To stop program play
Press 7.
Notes
• When programming chapters, chapters not programmed may
appear on the screen. This is not a malfunction.
• Programming may not be possible with certain DVD discs. On
these types of discs, the
programming is attempted.
• Only chapters within the same title can be programmed during
chapter programming.
• You cannot program while menu or top menu is displayed.
mark will appear on the screen when
In the program window, use the
number buttons to enter the
numbers of the titles or chapters in
the order you want to program them
in.
1
4
7
2
5
8
0
3
6
9
4
5
+
10
• To program DVD titles/chapters 9, 7,
and 18 in order, press 9, 7, +10 and 8.
Program Chapter
Program Title
Program Chapter
Program Title
Title
1
7
Chapter
1
Title
2(/20)
Current:
Title
Current:
(Chapter 1~18)
09
07
18
18
09
07
Program Memory Off
ENTER
Program Memory Off
Move
PROGRAM
Exit
ENTER
PROGRAM
Move
Play
Play
Exit
ENTER
Press ENTER or £.
• Playback starts in the set order.
• Press PROGRAM to return to the
previous display. The program will not
begin until £ is pressed.
PLAY
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY
ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
-
+
CH
CH
+
VOL
ENTER
2/3/5/∞
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
8
7
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
Number
buttons
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
MP3
Programming MP3s
A program with a maximum of 24 steps can be memorized.
I Navigate using the following controls:
Cursor button
CLEAR
Navigate the program list.
PROGRAM
Press PROGRAM to enter the [MP3
1
Clear the currently selected item in the
program list.
Program] screen.
If you added tracks to the program list from
the ‘Using the MP3 navigator’ on page 27,
the tracks are displayed here.
ENTER
Start playing the program list.
Exit the [MP3 Program] screen.
PROGRAM
Total number of folder and track
Folder name
Track name
MP3 Program
Folder : 001~25
– – – – – – – – : – – – – – – – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
ENTER
PROGRAM
Exit
Move
Play
From this screen you can enter folder and
track numbers directly to build up a
program list.
Use the number buttons to enter a
three-digit folder number.
The number of folders on the disc is
displayed in the top-left of the screen.
1
4
7
2
5
8
0
3
6
9
2
3
+
10
Once you’ve entered a valid folder number,
the name of the folder appears.
MP3 Program
Track 001~10
FOLDER1~ : – – – – – – – –
001:– – –
– – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
ENTER
PROGRAM
Exit
Move
Play
1
4
7
2
5
8
0
3
6
9
Use the number buttons to enter a
three-digit track number.
The number of tracks in the current folder
is displayed in the top-left of the screen.
+
10
Once you’ve entered a valid track number,
the name of the track appears.
MP3 Program
Folder 001~25 – – – – – – – – : – – – – – – – –
001:008
– – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
– – –:– – – – – –:– – – – – –:– – – – – –:– – –
ENTER
PROGRAM
Exit
Move
Play
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in a Favorite Order
DVD
VCD
CD
VCD
CD
MP3
Programming Video CDs, CDs
Additional programming options
A program with a maximum of 24 steps can be memorized.
After you have made a program, it is then possible to confirm,
add, or clear the contents of the program.
PROGRAM
Press PROGRAM.
The program screen appears. When a
Video CD or CD is loaded, the cursor
appears in the program window.
Program Track
I To confirm the contents of a program:
On a CD or Video CD track program, press PROGRAM to
confirm.
The program screen displays the current program.
On a DVD, select the program type (title, group, chapter or
track) with the cursor buttons (2/3).
1
1(/10)
0.00
Track
Current:
Total Time
The current DVD title, group, chapter or track program can then be
confirmed on the appropriate program screen.
I To add to a program:
1 Press PROGRAM.
ENTER
PROGRAM
Exit
Move
Play
2 Press a number button to add a new title, group, chapter, or
track at the end of the program.
3 Press PROGRAM to exit the program screen.
Use the number buttons to enter the
numbers of the tracks in the order
you want to program them in.
• To program tracks 9, 7, and 18 in order,
press 9, 7, +10 and 8.
1
4
7
2
5
8
0
3
6
9
2
3
I To delete a program:
1 Press PROGRAM.
2 Select the program with the cursor buttons (2/3), then
press CLEAR.
3 Press PROGRAM to exit the program screen.
+
10
• To edit the program, refer to the
procedures on the previous page.
Notes
Press ENTER or £.
• Playback starts in the specified track
ENTER
• The complete program will be deleted even if the disc tray is open
or power off (standby).
• Pressing CLEAR when the disc is stopped will clear all programs.
order.
• To stop the program play, press 7.
PLAY
Notes
• To program a pause, or to add or delete a number, refer to the
procedures for ‘Programming DVDs’ on page 30.
• You cannot program when playing a Video CD using menu
selections (during PBC).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
-
+
CH
CH
+
VOL
ENTER
ENTER
2/3/5/∞
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
£
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
Number
buttons
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
I To add a title/group/chapter/track to a
I To save a program in memory
program
This player can memorize the programs on up to 24 DVD-Video
discs. By turning the [Program Memory] to [On], the player will save
your program and recall it the next time you use the same DVD.
When the program memory exceeds 24, programs will be erased in
chronological order from the oldest program in memory.
1 Use the cursor button (∞) to highlight [Program Memory]
and use the cursor button (3) to select [On].
Press and hold PROGRAM for about 2 seconds.
The current title/group/chapter/track number appears on-screen
together with the program step number. If there isn’t already a
program then a new one will be created.
Chapter 07 3 Program 03
Program Chapter
Program Title
7
1
Title
1
Chapter
Current:
Title
(Chapter 1~18)
09
07
18
Program Memory On
Off
Move
ENTER
PROGRAM
Exit
Select
I To confirm the contents of a program:
Press PROGRAM.
2 Press ENTER.
The program is saved in memory.
Notes
Note
• When using this function to program DVDs, the program being
created corresponds to the Program screen (chapter or title) that
appears when PROGRAM is pressed. Be sure to check that the
appropriate program type is selected.
When a DVD with a program stored in memory is loaded, program
playback may start automatically.
I To erase a program saved in memory
• You cannot make a program containing chapters in different titles.
The player erases programs in chronological order when the
maximum number of programs that can be held in memory is
exceeded. To prevent the player from erasing older programs that
you may still use regularly, or when you don’t want to use a program
anymore, it is possible to manually erase programs stored in
memory.
1 Load a DVD that has a program stored in memory.
2 Press PROGRAM.
The program screen appears.
3 Use the cursor button (∞) to highlight [Program Memory]
and use the cursor buttons (3/∞) to select [Off].
4 Press ENTER.
The program is cleared from memory.
If you press CLEAR in stop mode, the program will be cleared from
memory and [Program Memory] will be turned to [Off].
33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
ANGLE
TOP MENU
Selecting the Camera Angle
You can select a camera angle when viewing DVDs with
the multi-angle option.
MENU
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD-V
Viewing from a Desired Camera Angle (Multi-Angle)
I To check whether or not a disc is recorded
ANGLE
Press ANGLE during playback.
The camera angle changes each time you
press the button.
with angles
The jacket of discs that are recorded with angles will be marked with
. When locations on discs that are recorded with angles are
played back, the
indicator can be displayed.
Angle
: 1/4
Angle
: 2/4
To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup
screen Video menu (page 51).
\
|
»
«
Angle
: 4/4
Angle
: 3/4
Notes
• You can use the Multi-Angle function only with discs featuring
recordings of images shot from different camera angles.
• During Multi-Angle playback, the
indicator in the display
lights.
• For some discs, selection can be made using the DVD menu. In
this case, press MENU to display the DVD menu screen and then
make your selection.
• If you change the camera angle during still playback, the DVD
player resumes normal playback.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
Selecting the Audio/
Subtitle Language
STANDBY ANGLE
AUDIO SUBTITLE
SUBTITLE
AUDIO
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
MENU
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD-V
DVD-V
Changing the Audio Language
(Multi-Language Function)
Selecting a Subtitle Language
(Multi-Language Subtitles)
Dolby Digital, PCM, and other audio data can be recorded on
DVDs in a number of languages or audio tracks, letting you
choose the desired language or audio.
You can select a desired subtitle language with DVDs that
have subtitle data in multiple languages recorded on them.
SUBTITLE
Press SUBTITLE repeatedly during
playback.
AUDIO
Press AUDIO repeatedly to select
the desired language.
Pressing AUDIO once displays the
currently selected language. Subsequent
presses rotates through the audio
languages available on the DVD.
Pressing SUBTITLE once displays the
currently selected subtitle language.
Subsequent presses rotates through the
subtitle languages available on the DVD.
Subtitle :1 English
Subtitle :2 Spanish
Dolby Digital
5.1CH
Dolby Digital
5.1CH
: 2 Spanish
Audio
: 1 English
Audio
HELLO!
HOLA!
Notes
Notes
• The subtitle language cannot be switched if the subtitle language
is not recorded, or if only one language is recorded.
• Switching the subtitle language may not be possible with some
discs. In this case, the
• To clear subtitles during playback, press SUBTITLE and then
press CLEAR, or press SUBTITLE until [Off] appears.
• For some discs, subtitle language selection can be made using
the menu on the DVD. In this case, press MENU to display the
DVD menu screen and then make your selection.
• You cannot switch languages if there is only one language
recorded on the disc.
• Switching the audio language may not be possible with some
titles. In this case, the
• For some titles, selection can be made using the DVD menu.
In these cases, press MENU to display the DVD menu screen
and then make your selection.
mark will be displayed.
mark is displayed.
•
When you erase the resume position or replace a disc, the DVD
player returns to the automatic setting in the setting menu (page 52).
•
When you erase the resume position or replace a disc, the DVD
player returns to the automatic setting in the setting menu (page 53).
I Changing Audio Type
For enjoyment of karaoke or similar format Video CDs, CDs and
MP3s, it is possible to select stereo audio, or either right or left
channel mono depending on the requirements of the source.
Press AUDIO repeatedly during playback to switch the audio
type.
Audio output changes from [1/L] (Left channel) to
[2/R] (Right channel) to [Stereo].
Audio
: 2/R
Audio
: 1/L
Audio
: Stereo
Notes
• With karaoke and other discs, set the appropriate audio type for
singing and accompaniment after referring to information on the
disc jacket or accompanying material.
• CDs recorded in DTS format are not compatible with this player.
Please do not change the audio type.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
Continuing Playback from a
STANDBY ANGLE
AUDIO SUBTITLE
STANDBY
LAST M
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Specified Location (Last Memory)
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
The Last Memory function is convenient when you want
to continue viewing a disc from the point where you were
watching before. Unlike the resume function, the Last
Memory function is effective even if the DVD is removed
from the player (Last Memory locations saved for Video
CDs are effective only if the disc remains loaded in the
player).
£
7
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
Last Memory may not work reliably with some Video CDs
that feature PBC.
DVD TV
VCD
VCD
DVD-V
DVD-V
Memorizing a Last Memory location to
return to later
Resuming playback from where LAST
MEMORY was pressed
LAST M
Press LAST M during play.
The “LAST” indicator lights on the player.
Load a disc that has a Last Memory
1
1
point memorized.
Some DVDs will start playback
automatically when loaded. In this case,
press 7 to stop playback.
STANDBY
Press STANDBY to turn the power
to standby, or stop playback with 7.
2
LAST M
Press LAST M while in the stop
Once memorized, the memorized point will
be recalled even if the power is turned off,
or if the disc is ejected. Points on up to 5
discs can be memorized, and those points
are recalled the next time any of the discs
are played back.
2
mode.
The disc begins playback at the
memorized point.
• Last Memory mode may not function for
some DVDs.
• A Last Memory point can be memorized
for only one disc at a time as the
function is only effective until the Video
CD is removed from the player.
• You can use Last Memory for up to five
discs (after that the one used least
recently is deleted to make space for a
new one).
• Even with a disc you have memorized
with Last Memory, playback begins at
the start of the disc if you press £.
• This function is for playback of DVDs or
Video CDs only. You cannot use it with
CDs and MP3s.
I To clear the Last Memory location
1 Load a disc that has a Last Memory point memorized.
Some DVDs will start playback automatically when loaded. In this
case, press 7 to stop playback.
2 Press LAST M while in the stop mode.
The disc begins playback at the memorized point.
3 Once the picture appears, press LAST M again.
4 While “Last Memory” is displayed on the screen, press
CLEAR.
The “LAST” indicator disappears from the display.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
Memorizing Settings for Often
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
COND. M
Viewed DVDs (Condition Memory)
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
You can store in memory settings for DVDs you often
watch. Settings remain in memory even if you remove the
disc from the player, or switch power to the player to
standby. If you load a disc that has its settings
memorized, “COND.” appears in the display. When you
start playing the disc, the memorized settings are
automatically recalled.
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
CLEAR
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
Memorizing Settings for DVDs
I When a disc that has memorized settings is
COND.M
Press COND. M during playback.
Settings are memorized for the disc
currently playing.
loaded
“Condition Memory” will appear on the screen, and the
previously memorized settings will be selected.
The following six settings are memorized:
On Screen Display (page 51)
Video Adjust (page 18, 48)
I Erasing the recorded contents
Load a disc that has memorized settings, and press CLEAR
while “Condition Memory” is being displayed. The disc’s
recorded data will be erased.
Camera Angle (page 34)
Multi-language (pages 52)
Notes
Multi-Language subtitles (page 35, 53)
Parental Lock Level (page 56-58)
• Settings are stored in memory for use any time.
• You can use Condition Memory for up to 15 discs (after that the
one used least recently is deleted to make space for a new one).
• If you make changes to any of the settings memorized in
Condition Memory, press COND. M during playback to memorize
new settings.
• Switching of the multi-language mode etc., is automatic on some
discs.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Off the Video Signal Output
The DVD Player can be set playing audio exclusively. In
this case, you can obtain sound of better quality, as the
DVD Player does not process video signals. (All the
Sampling Rate (kHz)
192/176.4
96/88.2
video output jacks send no video signals.)
Standby/On
Open/Close
Stop
Play
48/44.1
Pause
Video Circuit
Off
Last Memory
Repeat
Clear
Top Menu
Return
Menu
Setup
Cursor
Standby
Power
Dimmer
Random
Display
Push to Enter
On
Off
-
DPS 7.3
Video Circuit Off
DVD
VCD
CD
MP3
Switching the video signal off
Notes
• Some discs cannot be played without some on-screen menu
Press Video Circuit Off on the DVD
Video Circuit
Off
Player repeatedly.
interaction. If this is the case, be sure to perform the on-screen
procedures as indicated before turning off the video signal
processing circuitry.
• The Video Circuit Off setting is canceled whenever the DVD
Player is turned off.
The Video Circuit Off indicator lights up.
To turn on the video circuitry, press the
button again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Disc Information
Use DISPLAY to get current information about the disc
currently loaded.You can get information about the titles
and chapters on a DVD-Video, groups and tracks on a
DVD-Audio or tracks on a Video CD or CD or folders and
tracks on a MP3. When viewing DVDs, you can also check
the digital bitstream transmission rate.
DVD
VCD
CD
MP3
Viewing Disc Information during while a disc is playing
DVD-Audio
DISPLAY
Press DISPLAY during while a disc
current group/track number
elapsed time of current track
is playing. Press DISPLAY
repeatedly to change the
information being displayed.
Play
Track
1–1
–0.59/
1.19
2.18
remaining total time of
current track
remaining time of current track
The disc information is displayed
superimposed over the video image on the
screen.
«
current group/track number
elapsed time of current track
Press and hold DISPLAY to display
the time remaining on the disc.
Play
Group
1–1
–1.19/
1.19
2.18
When you release the button, the
information disappears.
elapsed time of current track
remaining total time of
current track
«
The display changes for each type of disc as follows each time
the button is pressed.
current group/track number
elapsed time of current track
Play
Tr. Rate:
1–1
1.19
8.9
DVD-Video
current title/chapter number
elapsed time of current title
transmission rate level meter transmission rate level
Play
Title
3–29
–51.06/ 101.04
49.58
«
remaining total time of
current title
remaining time of current title
Display off
«
current title/chapter number
elapsed time of current title
Video CD (with PBC disabled)
Play
Chapter
3–32
0.21/
54.53
1.51
current track number/
total number of tracks
Video CD's total elapsed time
elapsed time of current chapter
elapsed total time of
current chapter
Play
All
3/12
–59.26/
10.53
70.19
«
current title/chapter number
elapsed time of current title
Video CD's remaining time
Video CD's total time
Play
Chapter
3–32
–1.30/
54.53
1.51
«
current track number
Video CD's total elapsed time
remaining time of current chapter remaining total time of
current chapter
Play
Track
3
10.53
5.23
3.56/
«
current title/chapter number
elapsed time of current title
elapsed time of current track
total time of current tracks
Play
Tr. Rate:
3–32
54.53
6.3
«
current track number
Video CD's total elapsed time
transmission rate level meter transmission rate level
Play
Track
3
10.53
5.23
«
1.27/
total time of current tracks
remaining time of current track
Display off
«
Display off
39
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
DISPLAY
DIMMER
Viewing Disc Information
TOP MENU
2/3
-
+
CH
CH
+
VOL
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
I Using DIMMER function
DOWN
STEP/SLOW
Press DIMMER to change the display brightness.
Each time DIMMER is pressed, the display brightness of the unit
changes as shown below.
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
Normal → Dim → Very Dim → Off → Normal
+
10
-
A
RANDOM REPEAT
B
PROGRAM
(When the display is off, operating the player or remote controller
turns on the display for about 3 seconds.)
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD
DVD
VCD
CD
MP3
VCD
CD
MP3
Viewing Disc Information during while
a disc is playing
Viewing Disc Information during while
a disc is stopped
CD
DISPLAY
Press DISPLAY during while a disc
current track number
elapsed time of current track
is stopped to display DVD title and
chapter information or Video CD
and CD track information or MP3
folder and track information. Press
DISPLAY again to turn the display
off.
Information about the titles and chapters or
folders and tracks on a disc is displayed.
When the information exceeds the space
on the screen, use the cursor buttons (2/
3) to move to other screens.
Play
Track
3
0.03
3.32
–3.29/
remaining time of current track
remaining total time of
current tracks
«
current track number
current total time of tracks
Play
All
1/10
–66.20/
1.13
66.32
CD's remaining time
CD's total time
«
DVD-Video
Information: DVD
Display off
Title
01
Chapter
Title
06
Chapter
1 ~ 10
1 ~ 13
1 ~ 5
MP3
1 ~ 30
1 ~ 21
1 ~ 46
1 ~ 12
1 ~ 8
02
07
current track number/
total number of tracks in folder elapsed time of current track
03
08
1 ~ 4
04
09
1 ~ 8
05
10
Play
Track
16/20
TRACK1~1
0.05
DISPLAY
Exit
1/2
Titles and number of chapters in each title
track name
«
current folder number/
total number of folder
DVD-Audio
Video CD and CD
MP3
Information: DVD
elapsed time of current track
Group
01
Track
Group
06
Track
1 ~ 1
1 ~ 1
1 ~ 1
1 ~ 4
Play
Folder
2/10
FOLDER~1
0.05
1 ~ 1
1 ~ 1
1 ~ 1
1 ~ 1
1 ~ 1
02
07
03
08
folder name
04
09
05
«
DISPLAY
Exit
1/1
current folder number/
current track number elapsed time of current track
Groups and number of tracks in each group
Play
Track
2–16
–2.25
0.05
2.30
Information: Compact Disc
Total time
Track
72 . 04
Track
06
07
08
09
10
Time
Time
remaining time of
current track
total time of
current track
01
02
03
04
05
5 . 23
4 . 55
6 . 13
5 . 45
5 . 10
6 . 51
3 . 18
6 . 50
4 . 16
3 . 22
«
current folder number/
current track number
elapsed time of current track
DISPLAY
Exit
1/2
Total playing time of disc, tracks and track times
Play
Tr. Rate:
2–16
128kbps
0.05
Information: MP3
transmission rate level
Folder
001
002
Track
1 ~ 9
1 ~ 11
1 ~ 3
Folder
001
002
Track
1 ~ 10
1 ~ 13
1 ~ 5
«
Display off
003
003
004
005
1 ~ 22
1 ~ 15
004
005
1 ~ 4
1 ~ 8
Notes
• Depending on the format and type of disc being used, not all
DISPLAY Exit
1/2
screens may be displayed.
• When playing Video CDs in PBC mode or unfinalized CD-Rs not
all the above information is displayed.
Folders and number of tracks in each folder
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Setup
Adjusting Audio and Video Settings
The procedure on this page describes how to operate the
menus on the Setup screen.These menus are used to set
and adjust a number of system settings.The various
functions that can be adjusted are covered throughout
this manual.The procedure on this page provides a basic
outline for using the Setup screen menus.
Using the Setup Screen Menus
ON
Press ON (Standby/On on the front
panel).
Use the cursor buttons (3) to enter
1
2
6
the setting options.
Example
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out
DTS Out
Dolby Digital
Dolby Digital 3 PCM
SETUP
Press SETUP.
The Setup screen appears.
Example
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
Output Dolby Digital
SETUP
ENTER
Move
Select
Exit
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out — DTS 3 PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
• Not all menu options can be changed
while a disc is playing. In these cases,
the options appear grayed out on the
screen and cannot be adjusted. To
change these settings, press 7 first
before pressing SETUP.
Setup audio
Digital output format/tone adjust
SETUP
Exit
Move
Use the cursor buttons (2/3) to
• Operating the menu after pressing 7
may cancel the resume function.
3
4
select the menu you want.
As each menu is selected with the cursor,
the settings appear below the menu
heading.
• Some menu options are not immediately
effective if set while a disc is playing. To
make these settings effective, stop
playback and then start again, or
change the settings while the disc is
stopped.
Use the cursor buttons (∞) to enter
the menu.
The top item within the menu becomes
highlighted.
Example
Use the cursor buttons (5/∞) to
select a new setting and press
ENTER to set the new setting in
memory.
Press RETURN or the cursor button (2) to
exit the options without making any
changes.
7
8
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
ENTER
Dolby Digital Out
DTS Out
Dolby Digital
Dolby Digital 3 PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
RETURN
Press RETURN or the cursor button
(2) to go back to the main menu bar
to select another menu.
Use the cursor buttons (5/∞) to
select the setting you want to
change.
5
The options available for each setting
appear to the right when the setting is
selected. The current setting appears with
the setting indicator lit.
SETUP
Press SETUP to close the Setup
screen.
The Setup screen closes.
9
Notes
• If you turn off the DVD player during setup, the settings are
canceled. Press SETUP to finish the setup.
• The memorized resume position may be erased by setup.
• The Setup screen always shows the latest settings.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
Adjusting Audio and Video Settings
TOP MENU
-
+
CH
CH
+
VOL
ENTER
SETUP
ENTER
2/3/5/∞
-
VOL
RETURN
TV/VCR
SETUP
RETURN
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
Using the Setup Screen Menus
Changing to the Setup Screen “Expert”
Menu Mode
The Setup screen menus are divided into two levels, [Basic]
and [Expert], to make this unit more convenient to operate for
different levels of users. The [Basic] menu mode contains
functions that may be considered necessary for the basic
operations of this player and helpful on-screen information
I When setting up for the first time
It is recommended to set up player using the Setup Navigator
(page 17). If you selected [Auto Start Off] when the Setup
Navigator appeared, you may still set up the player using the
Setup Navigator in the General menu screen.
If you choose not to use the Setup Navigator, be sure to make
the necessary settings in the Setup screen Audio 1, Audio 2,
Video 1, Video 2 and Language menus as described on the
following pages.
i
identified by the
mark. The [Expert] menu mode adds to the
[Basic] menu mode additional functions of the player that can
be adjusted to further personalize performance of the player.
In this manual, functions that are contained in the [Expert]
Some DVDs start playing automatically when loaded in the
player. If a DVD has been loaded, be sure to press 7 before
proceeding.
menu mode are identified by the
Make changes to the [Setup Menu Mode] setting in the Setup
screen General menu.
icon.
Expert
Note
Audio1
V2 Language
General
A2 Video1
Setup Menu Mode Expert
Setup Navigator
Basic
Parental Lock — Off (us)
The next time you press SETUP, you’ll see the menu screen that you
exited from last time.
I How to interpret the setting indicator colors
Change menu mode
Move
in the Setup screen menus
SETUP
Exit
When setting up the system, or when making adjustments, it is
convenient to know what settings are applicable to the
different disc formats. When the settings appear for each
menu option, the currently selected setting appears with the
setting indicator highlighted in one of three colors: blue,
orange or yellow. These colors correspond to what formats the
menu option effects as shown in the table below.
Settings: Expert
Basic (Factory setting)
Note
On-screen information only appears in the [Basic] menu mode .
Color of indicator
Blue
Disc format(s)
DVD only
Orange
Green
CD only
All compatible formats
Note
If a setting applicable only to DVDs is changed while a Video CD or
CD is loaded, a blue DVD icon appears in the upper right hand
corner of the screen to indicate that the setting is not applicable to
the currently loaded disc. The setting will be effective the next time a
DVD is loaded.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio 1 Options
This player is capable of digital audio output for Dolby Digital,
DTS, MPEG, and signals with a sampling rate of 96 kHz.
Make settings in the Setup screen Audio menu to reflect the
capabilities of the components that you have made digital
connections to.
I Audio DRC
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
When Audio DRC is set to [Off], there is no effect on the audio
source.
Notes
Make changes to the [Audio DRC] setting in the Setup screen
Audio menu.
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set by
the player.
Audio1 A2 Video1 V2 Language General
Audio DRC Off
• If you have made only stereo line connections (analog) using the
supplied audio cord, it is not necessary to make any changes in
this menu.
Dolby Digital Out
On
DTS Out — DTS 3 PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
Dynamic playback at low volume
SETUP
Move
Exit
I Dolby Digital Out
This player is capable of outputting the Dolby Digital surround
sound audio signal. When the player is connected to an AV
component that has a built-in Dolby Digital decoder, select
[Dolby Digital]. This player can also convert the Dolby Digital
signal to a digital Linear PCM signal, the same digital signal
output from a CD. Select [Dolby Digital 3 PCM] when you
have made connections to an amplifier or receiver with a
Dolby Pro Logic decoder or a Digital Analog Converter (DAC).
Settings: Off (Factory setting)
On
Notes
• Audio DRC is only effective with Dolby Digital audio sources.
• The level of Audio DRC may differ depending on the DVD.
• If you have set the [Dolby Digital Out] to [PCM] and the [Digital
Out] setting to [On], the Audio DRC effect is output through the
digital out jack.
• The effect of Audio DRC depends on your speakers and AV
amplifier settings.
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out
DTS Out
Dolby Digital
Dolby Digital 3 PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
Settings: Dolby Digital
Dolby Digital 3 PCM
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Audio 1 Options
I DTS Out
I MPEG Out
This player is capable of outputting DTS digital audio for DVDs
recorded in DTS. When this player is connected to an AV
component that has a built-in DTS decoder, select [DTS]. If
your system is not equipped to decode DTS, select [DTS 3
PCM]. Refer to the operating instructions supplied with your
audio components if you are unsure about compatibility with
DTS.
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV component
that has a built-in MPEG decoder, select the [MPEG] setting.
Otherwise, select [MPEG 3 PCM] to convert the digital signal
to the PCM signal, the digital signal output from a CD.
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out — DTS 3 PCM
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out DTS
Linear PCM Out
MPEG
MPEG Out — MPEG 3 PCM
Change MPEG audio output mode
Linear PCM Out
MPEG Out — MPEG 3 PCM
Change DTS output mode
DTS3 PCM
SETUP
Move
Exit
Settings: MPEG
SETUP
Move
Exit
MPEG 3 PCM
Settings: DTS
Expert
I Digital Out
DTS 3 PCM
Depending on your preferences and the type of connections
made, you may opt not to have the digital audio signal output
at all. When this setting is set to [Off] there is no signal output
from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen
Audio menu in the [Expert] menu mode (page 42).
Note
If you have made digital audio connections to component(s) not
equipped to decode the DTS digital bitstream, be sure to select [DTS
3 PCM]. If a DTS signal is output without decoding, the output is
digital noise that could potentially cause damage to your speakers.
Audio1 A2 Video1 V2 Language General
I Linear PCM Out
Audio DRC — Off
If your AV amplifier (or other connected component) is
compatible with high sampling rates (96 kHz), set this to
[Down Sample Off], otherwise set it to [Down Sample On] (96
kHz audio is converted to a more compatible 48 kHz). Check
the manual that came with the other component if you’re
unsure whether it is 96 kHz compatible.
Dolby Digital Out — Dolby Digital
DTS Out — DTS 3 PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3 PCM
Digital Out
On
Off
SETUP
Move
Exit
Settings: On (Digital bitstream is output)
Off (Digital bitstream is not output)
Audio1 A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out — DTS 3 PCM
Linear PCM Out Down Sample On
MPEG Out
Down Sample Off
Change PCM output mode
SETUP
Move
Exit
Settings: Down Sample On (Factory setting)
Down Sample Off
Note
On DVDs that contain copy protection, the 96 kHz signal may only
be output from the analog audio jacks.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio 2 Options
I Audio Out
I Speaker Setting
If you connected this player to your amplifier using the 5.1
channel analog outputs (front, surround, center and subwoofer
outs), set this to [5.1 Channel]; if you connected only the
stereo outs, set to [2 Channel].
You only need to make this setting if you connected this player
to your amplifier using the 5.1 channel analog outputs.
Setting the size and position
Follow the on-screen displays to describe which speakers are
in your system and their sizes and positions.
Language
A1 Audio2 Video1 V2
Audio Out 2 Channel
Speaker Setting 5.1 Channel
General
Set the size of your speakers in the Size screen. The front left/
right (L/R) speakers have a fixed setting of [Large]. The center
(C), left surround (LS) and right surround (RS) speakers can
each be set to [Large], [Small] or [Off]. Set a speaker to
[Large] if the main speaker cone is 12cm or more; set to
[Small] if the it’s less than 12cm. Note that the LS and RS
speakers cannot be set independently.
Setting up audio output
SETUP
Move
Exit
Settings: 2 Channel (Factory setting)
5.1 Channel
The subwoofer (SW) can only be set to [On] or [Off].
Note
Setting the distance
• Even if you set [Audio Out] to [5.1 Channel], you’ll only get sound
from all speakers when playing a multi-channel DVD-Audio disc,
or Dolby Digital, DTS or MPEG encoded DVD disc.
• If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is
mixed down to two channels so you still hear all the audio
recorded on the disc.
• Some DVD-Audio discs don’t allow down-mixing of audio. These
discs always output multi-channel audio regardless of the setting
made here.
Set the distance from your main listening position to each
speaker in the [Distance] screen. The distance setting for any
speaker that was set to [Off] in the [Size] screen will be grayed
out. For the other speakers, enter the distance to the nearest
0.1m (10cm). You can set the distance for the L/R speakers
between 0.3m and 9m. Note that you must set the C and SW
speakers within 2m of the L/R setting. The LS and RS
speakers must be set within –6m and +2m of the L/R setting.
The graphic on the right of the screen represents your speaker
setup, with the currently selected speaker’s name highlighted
in blue, and the speakers set to [On] highlighted in yellow.
Language
A1 Audio2 Video1 V2
Audio Out — 2 Channel
Speaker Setting Start
General
Setting the speaker
system configuration
ENTER
SETUP
Move
Select
Exit
Language
A1 Audio2 Video1 V2
General
C
Speaker Setting
Size
L
R
L/R
C
LS
RS
SW
—
—
—
—
—
Large
Large
Large
Large
On
SW
LS RS
RETURN
SETUP
Return
Exit
ENTER
Distance
Select
Factory Settings: Center:
Large
Subwoofer: On
Surround: Large
Distance: All 3.0m
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Audio 2 Options
Expert
Expert
I Gain Settings
I CD Digital Direct
You may want to make this setting if you connected this player
to your amplifier using the 5.1 channel analog outputs.
Under the default setting, all channels are output at the
relative volumes they were recorded at. Change the setting to
[Variable] if you want to adjust the relative volume levels of
any of the speakers. Adjustment is in the range of –6dB to
+6dB, in steps of 0.5dB.
Setting this to On increases CD audio quality by bypassing
certain audio circuits in the player that audio signal would
otherwise pass through. However, this must be set to [Off] for
proper playback of DTS encoded CDs.
Language
A1 Audio2 Video1 V2
Audio Out — 2 Channel
Speaker Setting
Gain Setting — Fix
General
When set to [Variable], the overall output level may sound
quieter than when set to [Fix]. This is not a malfunction.
CD Digital Direct
On
Off
Language
A1 Audio2 Video1 V2
Audio Out — 2 Channel
Speaker Setting
Gain Setting Fix
CD Digital Direct Variable
General
SETUP
Move
Exit
Settings: On
Off (Factory setting)
ENTER
SETUP
Select
Exit
Move
Note
If this setting is set to [On] when a DTS CD is playback, noise is
produced.
Language
A1 Audio2 Video1 V2
Gain Setting
General
C
L
C
R
RS
LS
SW
—
—
—
—
—
—
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
L
R
SW
LS RS
RETURN
SETUP
Return
Exit
ENTER
Test Tone
Select
Settings: Fix (Factory setting)
Variable
Notes
• Gain settings are not effective when playing a CD with CD Digital
Direct set to [On].
• When set to [Variable], the overall output level is set to –6.0dB.
Adjust the relative volume levels of [C (center)], [LS (left
surround)], [RS (right surround)], and [SW (subwoofer)] in the
range of –6.0dB to +6.0dB from the value. The maximum output
level (+6.0dB) which is set to [Variable] is same as the output
level when set to [Fix].
Therefore, when set to [Variable], the output level sounds quieter
than the output level when set to [Fix], in almost all cases.
To help you gauge the correct gain levels, set the [Test Tone]
to [On] (test tone from just that speaker) or [Auto] (test tone
from each speaker in turn, excluding the subwoofer) then
adjust the gain so that all speakers appear to be the same
volume from your listening position.
Follow the on-screen displays to select speakers and set the
channel levels.
• You can adjust the [Test Tone] setting only when the player
is stopped.
• Many AV amplifiers allow you to make similar settings at the
amplifier stage. In this case, set the channel levels at the
player or the amplifier, not both.
• As the test tone plays through a speaker, its name is
highlighted in yellow on-screen.
Language
A1 Audio2 Video1 V2
Test Tone
General
L
C
R
RS
LS
SW
—
—
—
—
—
—
Off
Off
Off
Off
Off
Off
L
C
R
SW
LS RS
RETURN
SETUP
Return
Exit
ENTER
Gain
Select
Note
You can't use the test tone function when the Audio Out setting is 2
Channel (see page 45).The test tone will not work with the disc tray
open, or while a disc is playing.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Video 1 Options
I Setting the TV Screen Size
When viewing a wide screen TV or monitor
DVD screen size format
Setting and Appearance
The width-to-height ratio of conventional TVs is 4:3, while the
width-to-height ratio of wide screen and high-definition TVs is
16:9. This width-to-height ratio is called the aspect ratio.
When viewing software recorded in different aspect ratios, the
image’s height to width ratio can be switched to match the TV
or monitor being used.
Wide screen format DVD
Please note that there are some
wide screen letter box formats
that place black bars at the top
and bottom of the screen. This is
not a malfunction.
“Wide” setting
Make changes to the TV screen size in the [TV Screen] setting
in the Setup screen Video 1 menu. Please note that changes
to the [TV Screen] setting cannot be made when a disc is
playing. Stop playback of the disc before attempting to make
any changes.
Standard screen format DVD
When viewing a standard screen
format DVD on a wide screen
TV, black bars may be
automatically placed at the side
of the screen to adjust to the
DVD format.
Language
Audio1 A2 Video1 V2
General
“Wide” setting
TV Screen 4:3(Letter Box)
Video Out
4:3(Pan&Scan)
16:9(Wide)
16:9(Compressed)
Standard screen format DVD
(unnatural stretched effect)
If you are viewing a standard
screen format DVD on a wide
screen TV, the picture may
appear ‘stretched’ on the
screen. To remedy this
condition, change your wide
screen TV to display a standard
(4:3) screen. Refer to the
instructions supplied with your
wide screen TV or monitor for
more information.
Select your display preference
SETUP
Move
Exit
Settings: 4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
“Wide” setting
16:9 (Compressed)
Notes
• If you cannot switch the aspect ratio on your Progressive scan
compatible TV, select [16:9 (Compressed)] (when you cannot
switch the aspect ratio of the video images to 4:3 on your TV and
4:3 video images appear stretched (16:9)).
• If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3
(Letter Box)] is selected on this screen. If you prefer the
pan&scan format, change the settings on this screen.
• Whether the aspect can be switched or not depends on the disc.
Please refer to the information written on the disc jacket, etc.
• Some discs may not include the screen format selected in the [TV
Screen] setting. When this occurs, the standard TV screen format
available on the disc is automatically selected.
When viewing a standard size TV or monitor
DVD screen size format
Setting and Appearance
Wide screen format DVD
The Letter box presentation
places black bars at the top and
bottom portions of the screen to
provide the full wide screen
presentation of a movie on a
standard TV (4:3 aspect ratio).
“Letter Box” setting
Wide screen format DVD
The Pan & Scan presentation
crops both sides of the wide
screen presentation to use the
full standard TV screen.
I Differences in screen sizes and DVD
formats
The number of screen size formats currently available can be
somewhat confusing. If set incorrectly, the video presentation
may not appear as it should. The following diagrams and
descriptions are intended to help you set your TV screen size
in a way that will allow you to fully enjoy the digital video of
DVD.
“Pan & Scan” setting
Standard screen format DVD
If you have a standard TV, the
standard screen format will be
presented regardless of the
setting.
The settings in the [TV Screen] setting are perhaps most
applicable when the DVD you are watching is programmed in
the wide screen format. If you have a standard TV, select
either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your
personal preference. If you have a wide screen TV, select
[16:9 (Wide)].
Any setting
Wide screen format DVD
(unnatural squeezed effect)
If you are viewing a wide screen
format DVD on a standard TV
and the [TV Screen] setting is
set to [16:9 (Wide)], the picture
may appear ‘squeezed’ on the
screen. To remedy this
condition, select either [4:3
(Letter Box)] or [4:3 (Pan &
Scan)].
“Wide” setting
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Video 1 Options
Expert
I Setting the Component Video Output
I Switching the S-Video Output
Compared to a standard interlaced TV picture, a progressive
scan TV is capable of stable, flicker-free images.
Set only if you connected the COMPONENT VIDEO OUT
jacks to a progressive scan-compatible TV or monitor.
Make changes to the [Component Video] setting in the Setup
screen Video 1 menu.
You can switch the kind of S-Video signal output from the S-
Video outputs. If you connected your TV with an S-Video cord,
in rare cases the TV picture may appear stretched. In this
case switch the output from [S2] to [S1].
Make changes in the [S-Video Out] in the Setup screen Video
1 menu in the [Expert] menu mode (page 42).
Progressive scan compatible TVs also have built in internal
progressive scan circuitry. Even when [Interlace] is selected,
you are actually watching progressive scan video processed
by your TV’s internal circuitry.
Language
Audio1 A2 Video1 V2
General
TV Screen — 16:9(Wide
Component Video — Interlace
)
S-Video Out
Screen Saver
S1
S2
Choose the setting you prefer.
Language
Audio Video1 V2
General
SETUP
TV Screen — 16:9(Wide
)
Move
Exit
Component Video Progressive
S-Video Out
Screen Saver
Interlace
Settings: S1
S2 (Factory Setting)
SETUP
Move
Exit
I Turning the Screen Saver On and Off Expert
Settings: Progressive
As a protective function against residual images on the TV
screen or monitor, a phenomenon referred to as “screen burn”,
the screen saver appears when the same screen has been
displayed for a length of time. By default, the screen saver is
turned on. However, the screen saver function can be turned
on and off at your discretion.
Use this setting with TVs and monitors that have
progressive scan component video inputs. The
PROGRESSIVE indicator lights up. Check the TV’s
instruction manual if you are not sure about this.
Make changes to the [Screen Saver] setting in the Setup
screen Video 1 menu in the [Expert] menu mode (page 42).
PROGRESSIVE
Language
Audio1 A2 Video1 V2
General
TV Screen — 16:9(Wide
Component Video — Interlace
S-Video Out — S2
)
Interlace (Factory Setting)
Use this setting with regular TVs that are not
compatible with progressive scan. Check the TV’s
instruction manual if you are not sure about this.
Screen Saver
On
Off
SETUP
Move
Exit
Tip
Settings: On (Factory setting)
If this player is set to output progressive-scan video, it’s possible that
the picture will appear stretched when playing discs recorded in 4:3
format. This happens when the TV’s aspect ratio is set at 16:9. To
see the picture in its correct aspect ratio, change the TV setting to
4:3.
Off
Note
Pressing 8 (or £ ) displays a playback screen, and pressing 8 (or
£ ) again resumes playback.
If your TV can not be switched between 4:3 and 16:9, set this player
to [Interlace].
Note
If you connect a TV that is not compatible with a progressive scan
signal and choose one of the progressive scan settings, you will not
be able to see any picture at all. With your TV connected using either
the composite or S-Video terminals, choose the [Interlace] setting in
the [Component Video] menu.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Video Quality
You can either select a preprogrammed setting designed to
match certain program types or make adjustments to match
your own preferences and save them in the player’s memory.
Make changes to the [Video Adjust] setting in the Setup
screen Video 2 menu.
I Adjusting the picture quality settings
– To create your own setting (1)
1 Use the cursor button (3) to select [Start] then press
ENTER.
(Screen display during
interlace set up of component
output)
Language
Audio1 A2 V1
Video2
General
Background — Gray
Video Adjust Start
Video Memory Select
Video Setup
Picture Quality Control
SETUP
2 Use the cursor button (∞) to select [Video Setup] then
Move
Exit
press ENTER.
(Screen display during
interlace set up of component
output)
I Selecting a preprogrammed setting
1 Use the cursor button (3) to select [Start] then press
ENTER.
Video Memory Select
Video Setup
3 Use the cursor buttons (2/3) to select the setting to [On] or
[Off].
Video Memory Select
Video Setup
2 Press ENTER.
Pure Cinema
Move
Auto 1
ENTER
Auto 2 On
DISPLAY
Off
Select
Check
4 Use the cursor buttons (5/∞) to select the setting to adjust.
TV (CRT)
Memory 1
PDP
Professional
Memory 3
Memory 2
TV (CRT) (Factory Setting)
Optimized setting for a standard television set.
PDP
Optimized for a plasma display.
Professional
Optimized for a professional monitor.
Memory 1, Memory 2, and Memory 3
These are user programmable settings. See ‘Adjusting the picture
quality settings’ on pages 49 and 50 for more information.
3 Use the cursor buttons (2/3/5/∞) to select one of the
preprogrammed picture quality settings.
If there is a DVD or Video CD playing, the effects of each setting
can be viewed while it is highlighted on the screen. This may be
useful in selecting an appropriate setting.
4 Press ENTER.
The new selection is set.
Notes
• Each picture quality setting is defined by a number of individual
settings, described in ‘Adjusting the picture quality settings’ on
pages 49 and 50.
• Depending on the disc and the TV/monitor, you may not see the
effect clearly.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Adjusting the Video Quality
You can adjust any or all of the following picture quality factors:
Prog. Motion
When using progressive scan, this adjusts the motion and still
picture quality.
I Adjusting the picture quality settings
To create your own setting (2)
–
1 Use the cursor button (3) to select [Start] then press
ENTER.
PureCinema
When watching DVD movies, PureCinema optimizes the picture
quality. The default setting is Auto1, but if the picture appears
unnatural, then set to Auto2, On or Off as desired and adjust the
Prog. Motion setting (see above). See PureCinema in the
Glossary starting on page 160.
Video Memory Select
Video Setup
YNR
Adjusts the amount of noise reduction (NR) applied to the Y
(brightness) component.
2 Use the cursor button (∞) to select [Video Setup] and press
ENTER.
CNR
Adjusts the amount of noise reduction (NR) applied to the C
(colour) component.
MNR (Mosquito Noise Reduction)
Adjusts the amount of noise reduction applied to the mosquito
noise (video artifacts on the edge of the image resulting from
MPEG compression).
3 Press DISPLAY.
Page 1/2
Prog.Motion
PureCinema
YNR
CNR
MNR
fast
slow
Auto1 Auto2 On Off
Off
Off
Off
Off
soft
soft
max
max
max
max
fine
fine
BNR
Sharpness High
Sharpness Mid
Memory
BNR (Block Noise Reduction)
Adjusts the amount of noise reduction applied to the block noise.
Off
1
2
3
Sharpness High
Adjusts the sharpness of the high-frequency (finely detailed)
elements in the picture.
Sharpness Mid
Adjusts the sharpness of the mid-frequency (less detailed)
elements in the picture.
Page 2/2
Off
min
min
max
max
max
Detail
White Level
Black Level
Black Setup
Gamma
0 IRE 7.5 IRE
+
–
green
min
–
red
max
+
Hue
Chroma Level
Chroma Delay
Memory
Detail
Off
1
2
3
Adjusts how sharp edges appear in the picture.
4 Use the cursor buttons (5/∞) to select the setting and use
the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
White Level
Adjusts the intensity of white in the picture.
Black Level
Adjusts the intensity of black in the picture.
5 To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
Black Setup
For correction of floating black colour.
Gamma
The previous setting will be erased.
Adjusts the brightness of the darker images in the picture.
Hue
Adjusts the overall colour balance between red and green.
Chroma Level
Adjusts how saturated colours appear.
Chroma Delay
Compensates for misalignment of the Y (brightness) and the C
(colour) components.
5 Use the cursor buttons (2/3/5/∞) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
6 Repeat steps 4 and 5 to make adjustments to other
settings.
If you would like to save the settings in the player’s memory, be
sure to select either [1], [2], or [3] in the [Memory] setting to
establish which memory location to save the new settings in.
Please note that if you select a location where settings have
already been saved, the old settings will be replaced by the new
ones.
Memory
Move
Off
Select
1
2
3
DISPLAY
ENTER
Check
7 When you are finished making adjustments, press ENTER
to establish the new settings.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Video 2 Options
I Changing the Background of the Screen
I Turning the On-screen Display on or off
You can select a background to appear when the player is in
the stop mode.
You can choose to turn the on-screen displays (such as the
Setup screen) on or off.
Make changes to the [Background] setting in the Setup screen
Video 2 menu.
Language
Audio1 A2 V1
Video2
General
Background — Gray
Video Adjust
Still Picture — Auto
On Screen Display On
Language
Audio1 A2 V1
Video2
General
Background Gray
Video Adjust
Black
Angle Indicator
Off
SETUP
Move
Exit
Put Background Selections
Settings: On (Factory setting)
SETUP
Move
Exit
Off
Settings: Gray (Factory setting)
Note
Black
This setting is only effective with DVDs that contain a 4:3 aspect
ratio video presentation.
I Selecting the Type of Paused Image to
Expert
Display
This function lets you view a clear still-image when DVD
playback is paused.
Make changes in the [Still Picture] setting in the Setup screen
Video 2 menu in the [Expert] menu mode (page 42).
Expert
I Turning the angle indicator on and off
When a picture recorded in different angles is played back
is displayed on the screen. This setting lets you see clearly
whether the playback picture is recorded in multiple angles or
not.
Language
Audio1 A2 V1
Video2
General
Background — Gray
Video Adjust —
Still Picture Field
On Screen Display
Angle Indicator
t
Turn the angle indicator on or off in the [Angle Indicator]
setting in the Setup screen Video 2 menu in the [Expert] menu
mode (page 42).
Frame
Auto
Language
Audio1 A2 V1
Video2
General
SETUP
Background — Gray
Video Adjust
Move
Exit
Still Picture — Auto
On Screen Display — Position-Normal
Settings: Field (Picture shake will be eliminated during a
paused picture.)
Angle Indicator On
Off
Frame (Select to obtain higher picture quality.)
SETUP
Exit
Move
Auto (Selects [Field] or [Frame] automatically
according to the disc.) (Factory setting)
Settings: On (
is displayed) (Factory setting)
Off (Not Displayed)
Note
Even when the [Angle Indicator] setting is set to [Off], the
indicator in the display panel of the player lights during multi-angle
playback. Therefore, it is possible to know when the multi-angle
function can be used without having to display the icon on the
screen.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Language Options
DVDs have the capacity to contain a great deal of audio
I Selecting an audio language preference
information, which includes the ability to hold up to 8 different
language tracks and subtitle information in as many as 32
different languages. This section outlines the variety of audio
language and subtitle options available with this player.
Please note that if you have completed the Setup Navigator,
the audio and subtitle language options have automatically
been set in accordance with the [OSD Language] (the
language that appears on the screen).
The audio language that you normally listen to can be
selected from the various audio languages on a DVD. Even
when the audio language is changed during playback by
pressing AUDIO, the language selected at this setting will be
selected as the default when the DVD is changed.
Make changes to the [Audio Language] setting in the Setup
screen Language menu.
You cannot make this setting with a disc playing.
Note
General
Audio1 A2 Video1 V2 Language
DVDs differ in content and do not all contain multiple language or
subtitle information. Therefore making settings in this section may
have no effect on some DVDs.
OSD Language
Audio Language
Subtitle Language
Auto Language
English
French
German
Italian
Spanish
Other
I Setting the On-screen Display (OSD)
Setup audio language
Language
SETUP
Move
Exit
This setting is used to establish the language that operation
indicators and on-screen messages and operations display.
Change this setting in the Setup screen Language menu [OSD
Language] setting.
Settings: English
French
German
Italian
Spanish
General
Audio1 A2 Video1 V2 Language
OSD Language English
Other (For details on how to select other
languages, see ‘When [Other] is selected’ on page
54.)
Audio Language
Subtitle Language
Auto Language
français
Deutsch
Italiano
Español
Select the On Screen Language
Note
The menu settings may be different from those shown above.
SETUP
Move
Exit
Settings: English
français
Deutsch
Italiano
Español
Notes
• The menu settings may be different from those shown above.
• The [OSD Language] setting is factory set to [English]. If you
want English to be displayed, it is not necessary to adjust this
setting.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 43 to display it.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
I Selecting a subtitle language preference
I Selecting a DVD menu language preference
Expert
The subtitle language that you will normally display can be
selected from the subtitles programmed on a disc. Even when
the subtitle language is changed during playback by pressing
SUBTITLE, the language selected at this setting will be
selected when the disc is changed.
Make changes to the [Subtitle Language] setting in the Setup
screen Language menu.
You cannot make this setting with a disc playing.
In addition to containing different audio languages, DVD may
also contain menu screens in different languages as well.
Setting a DVD language preference, sets the selected
language as a default when DVDs with menu information in
that language are encountered.
Selecting [w/ Subtitle Language] automatically assigns the
language selected in the [Subtitle Language] setting.
Make changes to the [DVD Language] setting in the Setup
screen Language menu in the [Expert] menu mode (page 42).
You cannot make this setting with a disc playing.
General
Audio1 A2 Video1 V2 Language
OSD Language
Audio Language
Subtitle Language
Auto Language
English
French
German
Italian
General
Audio1 A2 Video1 V2 Language
Spanish
Other
OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Language
Subtitle Display
Subtitle Off
w/ Subtitle Language
English
French
German
Italian
Setup disc's subtitle language
SETUP
Move
Exit
Spanish
Other
Settings: English
French
SETUP
Move
Exit
German
Italian
Settings: w/ Subtitle Language (Factory setting)
Spanish
English
Other (For details on how to select other languages,
see ‘When [Other] is selected’ on page 54.)
French
German
Italian
Spanish
Note
The menu settings may be different from those shown above.
Other (For details on how to select other
languages, see ‘When [Other] is selected’ on page
54.)
I Setting Auto Language to control subtitle
and audio language based on program
content
Notes
• The menu settings may look different from the one shown above.
• If this function is not effective, the languages that can be selected
may also be selected in the DVD menu. Press MENU to open the
DVD menu and make your selection accordingly.
When the Auto Language function is used, foreign movies are
shown with the original audio soundtrack and subtitles in the
language selected in the [Subtitle Language] menu option.
Domestic films are shown with the original audio soundtrack
and no subtitles. (This setting may not be effective with all
DVD discs.)
Make changes to the [Auto Language] setting in the Setup
screen Language menu.
You cannot make this setting with a disc playing.
General
Audio1 A2 Video1 V2 Language
OSD Language
Audio Language
Subtitle Language
Auto Language
English
English
English
On
—
—
—
Off
Play dialog, etc. in original language
Subtitle ON with foreign audio
SETUP
Move
Exit
Settings: On (Factory setting)
Off
Note
The Auto Language function operates only when this function
is set to [On], and the language set for the [Audio Language]
and [Subtitle Language] settings is the same.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Language Options
I Selecting subtitles, assist subtitles or no
I When [Other] is selected
When you want to select one of the 136 languages as the
main audio language, follow the steps below when the
following screen appears.
subtitles Expert
Use this function to turn the subtitles on or off. Additionally,
some DVDs provide assist subtitles that provide additional
explanations of scenes in addition to the standard subtitles for
viewers who are hard of hearing. Select [Assist Subtitle] to
display these subtitles on DVDs where this function is offered.
Make changes to the [Subtitle Display] setting in the Setup
screen Language menu in the [Expert] menu mode (page 42).
You cannot make this setting with a disc playing.
A language code list can be found on page 55.
General
Audio1 A2 Video1 V2 Language
OSD Language
Audio Language
Subtitle Language
Auto Language
English
French
German
Italian
Spanish
Other
Setup audio language
General
Audio1 A2 Video1 V2 Language
SETUP
ENTER
Move
Select
Exit
OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Language
Subtitle Display
Subtitle Off
English
English
English
On
On
Off
—
—
—
—
1 Use the cursor buttons to select [Other] and press ENTER.
The language selection screen appears.
General
Audio1 A2 Video1 V2 Language
Audio Language
Assist Subtitle
SETUP
Move
Exit
List of Language
Code (0~2)
en: English
0
5
1
4
Settings: On (Factory setting)
Off
Setup audio language
RETURN
SETUP
Assist Subtitle
Return
Exit
+/–
Move
ENTER
Select
Notes
• If there is no subtitle information recorded on the DVD, no
subtitles are displayed even if this function is set to [On].
• This setting serves as a default as whether or not to display
subtitles. Even if this option is set to [Off], subtitles can be
displayed by pressing SUBTITLE. Similarly, if this option is set to
[On], the subtitles can be turned off by pressing SUBTITLE and
then CLEAR.
2 Use the cursor buttons (2/3) to select either “List of
Languages” or “Code”.
3 If you select “List of Languages”, use the cursor buttons
(5/∞) to select the language.
For languages which are only shown as a code, please refer to
‘Language Code List’ on page 55.
List of Languages
ja: Japanese
I Forcing subtitles to be displayed Expert
Even when the subtitles are turned off, some DVDs will
nevertheless display them on the screen. This setting allows
you to select the language of the subtitles to be displayed with
this type of DVD.
Select [With Audio] to display the subtitles in the same
language as the currently selected Audio Language. Select
[Selected Subtitle] to display the subtitles in the language set
in the [Subtitle Language] setting.
If you select “Code”, use the cursor buttons (5/∞) to input
the numbers of the input code.
Use the cursor buttons (2/3) to change the position of the
cursor. You can also use the number buttons to enter the code.
Code (0~2)
Make changes to the [Subtitle Off] setting in the Setup screen
Language menu in the [Expert] menu mode (page 42).
You cannot make this setting with a disc playing.
1
0
0
1
General
Audio1 A2 Video1 V2 Language
4 Press ENTER to set the new language.
OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Language
Subtitle Display
Subtitle Off
English
English
English
On
—
—
—
—
—
To exit the screen without making any changes, press RETURN.
English
With Audio
Selected Subtitle
SETUP
Move
Exit
Settings: With Audio
Selected Subtitle (Factory setting)
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Language codes are used when setting the audio and subtitle
language preferences (page 52, 53).
Language
Input-code
Language
Input-code
Language
Input-code
Japanese (ja)
English (en)
French (fr)
1001
0514
0618
0405
0920
0519
2608
1412
1620
1922
1821
1115
0512
0101
0102
0106
0113
0118
0119
0125
0126
0201
0205
0207
0208
0209
0214
0215
0218
0301
0315
0319
0325
0401
0426
0515
0520
0521
0601
0609
0610
0615
0625
0701
0704
0712
0714
Gujarati (gu)
Hausa (ha)
0721
0801
0809
0818
0821
0825
0901
0905
0911
0914
0919
0923
1009
1023
1101
1111
1112
1113
1114
1119
1121
1125
1201
1214
1215
1220
1222
1307
1309
1311
1312
1314
1315
1318
1319
1320
1325
1401
1405
1415
1503
1513
1518
1601
1612
1619
1721
Rhaeto-Romance (rm)
Kirundi (rn)
Romanian (ro)
Kinyarwanda (rw)
Sanskrit (sa)
Sindhi (sd)
1813
1814
1815
1823
1901
1904
1907
1908
1909
1911
1912
1913
1914
1915
1917
1918
1919
1920
1921
1923
2001
2005
2007
2008
2009
2011
2012
2014
2015
2018
2019
2020
2023
2111
2118
2126
2209
2215
2315
2408
2515
2621
Hindi (hi)
German (de)
Italian (it)
Croatian (hr)
Hungarian (hu)
Armenian (hy)
Interlingua (ia)
Interlingue (ie)
Inupiak (ik)
Spanish (es)
Chinese (zh)
Dutch (nl)
Sangho (sg)
Serbo-Croatian (sh)
Sinhalese (si)
Slovak (sk)
Portuguese (pt)
Swedish (sv)
Russian (ru)
Korean (ko)
Greek (el)
Indonesian (in)
Icelandic (is)
Hebrew (iw)
Yiddish (ji)
Slovenian (sl)
Samoan (sm)
Shona (sn)
Afar (aa)
Javanese (jw)
Georgian (ka)
Kazakh (kk)
Somali (so)
Albanian (sq)
Serbian (sr)
Siswati (ss)
Sesotho (st)
Sundanese (su)
Swahili (sw)
Tamil (ta)
Abkhazian (ab)
Afrikaans (af)
Amharic (am)
Arabic (ar)
Greenlandic (kl)
Cambodian (km)
Kannada (kn)
Kashmiri (ks)
Kurdish (ku)
Kirghiz (ky)
Assamese (as)
Aymara (ay)
Azerbaijani (az)
Bashkir (ba)
Byelorussian (be)
Bulgarian (bg)
Bihari (bh)
Telugu (te)
Latin (la)
Tajik (tg)
Lingala (ln)
Thai (th)
Laothian (lo)
Lithuanian (lt)
Latvian (lv)
Tigrinya (ti)
Turkmen (tk)
Tagalog (tl)
Bislama (bi)
Bengali (bn)
Tibetan (bo)
Breton (br)
Malagasy (mg)
Maori (mi)
Setswana (tn)
Tonga (to)
Catalan (ca)
Corsican (co)
Czech (cs)
Macedonian (mk)
Malayalam (ml)
Mongolian (mn)
Moldavian (mo)
Marathi (mr)
Malay (ms)
Turkish (tr)
Tsonga (ts)
Tatar (tt)
Welsh (cy)
Twi (tw)
Danish (da)
Bhutani (dz)
Esperanto (eo)
Estonian (et)
Basque (eu)
Persian (fa)
Finnish (fi)
Ukrainian (uk)
Urdu (ur)
Maltese (mt)
Burmese (my)
Nauru (na)
Uzbek (uz)
Vietnamese (vi)
Volapük (vo)
Wolof (wo)
Xhosa (xh)
Nepali (ne)
Norwegian (no)
Occitan (oc)
Oromo (om)
Oriya (or)
Fiji (fj)
Yoruba (yo)
Zulu (zu)
Faroese (fo)
Frisian (fy)
Irish (ga)
Panjabi (pa)
Scots-Gaelic (gd)
Galician (gl)
Guarani (gn)
Polish (pl)
Pashto, Pushto (ps)
Quechua (qu)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Setting the Parental Lock Level
This player lets you set the Parental Lock if the DVD has a
I Entering the Password
parental lock level recorded on it. With Parental Lock capable
discs, you can block access to material you feel is
inappropriate for your children. Refer to the DVD disc jacket
and the accompanying documentation to see if a particular
disc contains a parental lock level.
Make changes to the [Parental Lock] setting in the Setup
screen General menu. Please note that changes to the
Parental Lock level cannot be made when a disc is playing.
Stop playback of the disc before attempting to make any
changes.
When you select either [Level] or [Country Code], it is
necessary to register the password (4-digit code number).
You’ll be asked to confirm your existing password before
registering a new one. Use the following steps at any time you
are asked to enter or confirm your password.
1 Use the cursor buttons (5/∞) or the number buttons to
select a number between 0 and 9.
You can also use the number buttons to enter the numbers
directly. When entering your password for the first time, or
changing it, you will be asked to reenter your password. When
using the number buttons to confirm the password, the numbers
appear as asterisks, and the cursor advances automatically to
the next position.
You cannot select [Level] or [Country Code] until you have
registered a password. Select [Password] to register a new
password. See ‘Entering the password’ on the this page for
how to register a new password.
Audio1
V2 Language
General
A2 Video1
Prental Lock: Register Code Number
Audio1
V2 Language
General
A2 Video1
Setup Menu Mode — Basic
Setup Navigator
Parental Lock Password
Level
Enter 4—Digit Code
Country Code
RETURN
Return
Exit
+/–
Move
Setup viewing restrictions
ENTER
SETUP
Move
Exit
2 Use the cursor buttons (2/3) to move the cursor to a
different position in the password.
Settings: Password
When all four numbers of the password have been entered,
ENTER appears on the screen.
(For information, refer to ‘Entering the Password’ on
the this page.)
Audio1
V2 Language
General
A2 Video1
Level
Prental Lock: Register Code Number
(For information, refer to ‘Setting the Parental Lock
Level’ on the following page.)
ENTER
1
0
1
9
Enter 4—Digit Code
Country Code
(For information, refer to ‘Setting the Country Code’
on the following page.)
RETURN
SETUP
Return
Exit
+/–
Move
3 Press ENTER to set the password.
The password is entered.
When a DVD with a set Parental Lock level is loaded
Playback cannot be started until the code number has been correctly
input by using the cursor buttons (2/3/5/∞) or the number buttons,
and ENTER has been pressed.
Notes
• Be sure not to forget your password. If you should forget it, reset
the system, and enter a new password. To reset the system, see
‘Resetting the Player to System Settings’ (page 59). Please note
that this procedure resets the system, and clears all saved
settings, not just the password.
• Some discs lock out violent scenes. Refer to instruction notes on
discs.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
I Setting the Parental Lock Level
I Setting the Country Code
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD disc jacket or
accompanying documentation. If you use the Condition
Memory function to save the settings for a particular disc, the
Parental Lock level is saved as well. Because it is saved in
memory, Parental Lock levels can be set for individual discs
according to their content rather than a set level for all DVDs.
1 Select [Level] in the [Parental Lock] setting and press
ENTER.
Change your Country Code whenever you feel it is necessary.
However, if you forget your existing password, you cannot
enter this screen to change it.
1 Select [Country Code] in the [Parental Lock] setting and
press ENTER.
The screen changes to the password input screen. To enter the
password, refer to ‘Entering the Password’ on the previous page.
The Country Code selection screen appear.
General
Audio1 A2 Video1 V2 Language
Country Code
The screen changes to the password input screen. You cannot
select [Level] until you have registered a password. To enter the
password, refer to ‘Entering the Password’ on the previous page.
List of Codes
Code (0~2)
us
2
1
1
9
Audio1
V2 Language
General
A2 Video1
Setup Country Code
Parental Lock: Level Change
RETURN
SETUP
Return
Exit
+/–
Move
ENTER
Select
1
Level
2
3
4
5
6
7
8
Off
2 Use the cursor buttons (2/3) to select either “List of
Codes” or “Code”.
3 If you select “List of Codes”, use the cursor buttons (5/∞)
to select the country.
Set Parental Lock Level
RETURN
SETUP
Select
Return
Exit
ENTER
Move
2 Use the cursor buttons (2/3) to adjust the Parental Lock
Level.
The lock icons appear “unlocked” up to the selected level to
indicate that access is available.
3 Press ENTER to set the new level.
For country codes which are only shown as a code, please refer
to ‘Country Code List’ on page 58.
List of Codes
us
The new Parental Lock level is set and the screen returns to the
General menu screen. To go back to the General menu screen
without making any changes, press RETURN.
If you select “Code”, use the cursor buttons (5/∞) to input
the numbers of the input code.
Use the cursor buttons (2/3) to change the position of the
I Changing the Password
Change your password whenever you feel it is necessary.
However, if you forget your existing password, you cannot
enter this screen to change it.
cursor. You can also use the number buttons to enter the code.
Code (0~2)
1 Select [Password Change] in the [Parental Lock] setting
and press ENTER.
2
1
1
9
The screen changes to the password input screen. To enter the
password, refer to ‘Entering the Password’ on the previous page.
2 Use the cursor buttons (2/3/5/∞) or the number buttons to
enter the new password.
4 Press ENTER to set the new Country Code.
To exit the screen without making any changes, press RETURN.
3 When the new password has been entered, press ENTER.
The new password is set and the screen returns to the General
menu screen. To go back to the General menu screen without
making any changes, press RETURN.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio and Video Settings
Country Code List
Other Settings
Expert
I Bonus Group
Country
Input-code Country-code
Some DVD-Audio discs have an extra ‘bonus’ group that
requires a 4-digit key number to access. See the disc
packaging for details and the key number. When you try and
play the bonus group, the key number input screen will
automatically appear, although it is also available from the
General menu. Input the number and press ENTER.
0118
ar
0121
au
0120
at
0205
be
ARGENTINA
AUSTRALIA
AUSTRIA
BELGIUM
0218
br
0301
ca
0312
cl
0314
cn
0411
dk
0609
fi
0618
fr
BRAZIL
Audio1
V2 Language
General
A2 Video1
CANADA
Setup Menu Mode — Expert
Setup Navigator
Parental Lock — Off (us)
CHILE
CHINA
Bonus Group
Start
Auto Disc Menu — On
Group Playback — Single
DENMARK
FINLAND
SETUP
Move
Exit
FRANCE
0405
de
0811
hk
0914
in
GERMANY
HONG KONG
INDIA
Expert
I Auto Disc Menu
This specifies whether the menu (Top menu) is automatically
displayed after loading a disc. Set to [On] if you want the menu
displayed automatically, or [Off] if you don’t want it displayed.
0904
id
0920
it
INDONESIA
ITALY
1016
jp
JAPAN
Audio1
V2 Language
General
A2 Video1
1118
kr
1325
my
1324
mx
1412
nl
1426
nz
1415
no
KOREA, REPUBLIC OF
MALAYSIA
MEXICO
Setup Menu Mode — Expert
Setup Navigator
Parental Lock — Off (us)
Bonus Group
Auto Disc Menu On
NETHERLANDS
NEW ZEALAND
NORWAY
Group Playback
Off
SETUP
Move
Exit
1611
pk
PAKISTAN
Settings: On (Default setting)
1608
ph
1620
pt
1821
ru
1907
sg
0519
es
1905
se
PHILIPPINES
PORTUGAL
RUSSIAN FEDERATION
SINGAPORE
SPAIN
Off
Note
Some DVD discs display a menu automatically regardless of
this setting. If you press £ while a disc is loading, this setting
is ignored.
SWEDEN
0308
ch
2023
tw
SWITZERLAND
TAIWAN, PROVINCE
OF CHINA
Expert
I Group Playback
DVD-Audio discs can have up to 9 groups of tracks. When set
to [Single], the selected group plays and then the disc stops,
or returns to the menu screen. Use Group Search (page 26) to
select the group to play. (You cannot use the track skip 4/
¢ or scan buttons 1/¡ in this mode.)
2008
th
0702
gb
2119
us
THAILAND
UNITED KINGDOM
UNITED STATES OF
AMERICA
Set to [All] if you want to play all the groups on a disc
consecutively.
Audio1
V2 Language
General
A2 Video1
Setup Menu Mode — Expert
Setup Navigator
Parental Lock — Off (us)
Bonus Group
Auto Disc Menu — On
Group Playback
All
Single
SETUP
Move
Exit
Settings: All
Single (Default setting)
Note
Even if the players is set to [All] but you select a group to play
from the disc menu, only that group will play.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
ON/STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
-
+
CH
CH
+
VOL
ENTER
SETUP
2/3/5/∞
ENTER
-
VOL
RETURN
TV/VCR
SETUP
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
M
FUNCTION M
SEARCH CLEAR
+
10
-
A
RANDOM REPEAT
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
Memorizing Settings (Function
Memory)
Recalling Memorized Settings
FUNCTION M
Up to 5 settings can be memorized.
Press FUNCTION M.
1
Only memorized settings are displayed.
SETUP
Press SETUP.
1
The Setup screen appears.
Use the cursor buttons (5/∞) to
2
3
select the menu to be recalled.
Use the cursor buttons (2/3) to
select the menu you want.
2
Press ENTER.
ENTER
Use the cursor buttons (5/∞) to
3
select the setting to be memorized.
As each menu is selected with the cursor,
the settings appear below the menu
heading.
ENTER
Press ENTER.
Resetting the Player to System Settings
4
To reset the player, press and hold Stop on the front
panel.Then press Standby/On to turn the unit from
standby to on.
All program memory, saved settings from functions such as
Video Memory, Last Memory and Condition Memory are
cleared, TV System is reset to AUTO and all Setup screen
menus are returned to factory settings.
FUNCTION M
Press FUNCTION M.
5
“FM” will appear on the screen, and the
setting will be memorized.
I To clear the Function Memory
Press FUNCTION M. again
Note
Some settings cannot be memorized.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
OPEN
ON
/CLOSE
TV
Others
ON/STANDBY
ON
STANDBY
STANDBY ANGLE
AUDIO SUBTITLE
LAST
M
COND.M DIMMER DISPLAY
MENU
TOP MENU
Pre-programming remote controller
VOL +/–
CH +/–
-
+
CH
CH
+
VOL
ENTER
ENTER
-
VOL
RETURN
TV/VCR
SETUP
TV/VCR
PAUSE
FR
STOP
FF
PLAY
UP
DOWN
STEP/SLOW
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION
Number buttons
M
SEARCH CLEAR
+
10
-
RANDOM REPEAT
A
B
PROGRAM
-
REMOTE CONTROLLER RC 451DV
DVD TV
DVD/TV
Learning a Pre-programming Code
Controlling a TV
You can make RC-451DV remote controller to operate a TV
from other brand than Integra/ONKYO by storing the pre-
programming code of the brand in the RC-451DV.
DVD
TV
Set the DVD/TV switch to TV.
1
DVD
TV
Set the DVD/TV switch to TV.
1
2
ON
Press the ON button to turn on the
device.
2
3
Find the 2-digit number for the brand
name of the component that you want
to operate in the table on page 56.
Press the desired operation button.
CH+
: Changes the TV channel
upward.
Turn on the TV that you want to
operate.
CH–
: Changes the TV channel
downward.
3
4
TV VOL+ : Increases the TV volume.
TV VOL– : Decrease the TV volume.
TV/VCR : Switches the TV/VCR inputs.
STANDBY
While holding down the STANDBY
button on the RC-451DV that you
want to program, press the ENTER
button, and then release both
buttons.
ENTER
Pre-programming Code List
Brand
ADMIRAL
AOC
BELL & HOWELL 01, 02
Code
01-03
04
Brand
Code
NEC
04
1
4
7
2
5
8
0
3
6
9
Within 30 seconds, enter the 2-digit
code number.
PANASONIC
PHILCO
16-18, 24
04, 09, 13
09
5
6
BROKSONIC
CRAIG
04
PHILIPS
+
10
05-08
PIONEER
10, 18, 25
04, 26
CROSLEX
09
PORTLAND
PROSCAN
QUASAR
CURTIS MATHIS
DAEWOO
DAYTRON
EMERSON
04, 08, 10
04, 11, 12
13
03
Press some operation buttons for
the component that you want to
operate to check if the system
operates properly.
If the system operates properly, the code is
correct. If the component does not operate
properly, return to step 3.
17, 18
RADIO SHACK
03, 04, 08,
23
04-08, 13,
14
RCA
03, 04, 17,
26-28
FISHER
GE
15
03, 04,
16-18
SAMSUNG
SANYO
SCOTT
04, 13, 29
15
GOLDSTAR
HITACHI
04, 13, 19
04, 13, 20,
21
04, 08
SHARP
02, 13, 14
Notes
• With some brand’s components, some buttons may not work
correctly.
SIGNATURE 2000 01, 02
JC PENNEY
03, 04, 17,
19
SONY
30
• If more than one code is given in the table, try the code one by
one until you reach the code for your component (i.e. if the first
code does not work, then try the next).
• The code can be retained by changing the batteries within 1
minute. If the code is lost, store the pre-programming code again.
SYLVANIA
SYMPHONIC
TOSHIBA
VIDTECH
WARDS
04, 09
08
JVC
KTV
LXI
22
04, 08, 13
03, 09, 10,
15
02, 10
04, 20
04, 13, 14
02, 23
01, 31
MAGNAVOX
MITSUBISHI
04, 09, 13
04, 23
YAMAHA
ZENITH
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Components not Reached by the
Remote Controller Signals (IR IN/OUT)
The following equipment (sold separately) is essential for
operation:
• Integra/Onkyo’s Multi-Room System kits (IR Remote Controller
Extension System), or
• Multiroom A/V distribution and control systems from Niles® and
Xantech® to name a few.
If the remote controller signal does not
reach the DPS-7.3 remote sensor
If the remote controller signal does not
reach other components
If the DPS-7.3 is located inside a cabinet or other
enclosure where the infrared rays from the remote
controller cannot enter, then operation with the remote
controller will not be possible. In such a case, it will be
necessary to install a remote sensor at a location
outside of the cabinet for the infrared rays from the
controller to reach.
In this situation, you will need to use a commercially
available IR emitter. Connect the mini plug of the IR
emitter to the IR OUT terminal on the DPS-7.3 and then
place the IR emitter on the remote sensor of the
component or facing it. When the IR emitter is
connected, only the signal input to the IR IN terminal is
output to the IR OUT terminal. The signal input from the
remote sensor on the front of the DPS-7.3 will not be
output to the IR OUT terminal.
IR Receiver
Connecting
block
IR IN
IR Receiver
Connecting
block
IR IN
DPS-7.3
IR OUT
DPS-7.3
IR Emitter
Remote Controller
Remote Controller
In the
cabinet
otther
component
:Signal flow
Make connection as shown below. Do not plug the
equipment into the power source until the connection is
completed.
:Signal flow
Mini plug cable
otther component
:Signal flow
IR
Remote control
sensor
OUT
from connecting block
IN
Emitter
DPS-7.3
Mini plug cable
Mini plug
IR
OUT
IN
IR Emitter
DPS-7.3
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective
instruction manuals of the connected components and TV.
Symptoms
Causes
Remedies
Pages
The DVD Player doesn’t
• The mains lead is disconnected.
• Check the connection of the mains lead.
16
switch on.
• The main power is set to OFF.
• There is external noise in the computer
circuits of the DVD Player.
• Turn on the main power.
16
–
• Switch off the main power, then switch it
on again. If not recovered, disconnect the
mains lead, then connect it again.
• Contact your nearest Integra/ONKYO
service center.
• The AC fuse is blown.
–
The disc tray comes back
out automatically, shortly
after the disc tray is closed. • The disc is dirty or warped.
• Region number does not conform with
• The disc is not placed properly on the disc • Use the disc tray guide to align the disc.
21
tray.
• Refer to ‘Notes on Discs’.
5
4
• If the region number on the disc does not
match the number on the player, the disc
cannot be used
this unit.
The DVD Player does not
start playback.
• No disc is inserted.
• Insert a disc. (Check that “DVD,” “VCD,”
or “CD” is lit in the DVD Player’s display.)
• Check the playable discs.
• Place the disc with the playback side
down.
21
• An unplayable disc is inserted.
• The disc is placed upside down.
5
21
• The disc is not placed within the disc tray
guide.
• The disc is dirty.
• Place the disc within the proper guide on
the disc tray.
• Eject the disc and clean it.
21
6
• The parental lock function is activated.
• Deactivate the parental lock function or
change the parental lock level.
56-58
The playback picture is
occasionally distorted.
• The disc is dirty.
• It is in fast forward or fast reverse
playback.
• Eject the disc and clean it.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
6
–
Brightness is unstable or
noise is visible on the
playback picture.
• Copy protection is activated.
• Connect the DVD Player directly to the
TV. Avoid connecting the DVD Player to
the TV through a VCR.
13, 14
The picture from the DVD
Player doesn’t appear on
the TV screen.
• The TV is not set to receive the output
signals from the DVD Player.
• The DVD Player is not properly
connected.
• Set the TV to the DVD Player’s input.
–
• Check the connections to the DVD Player. 13, 14
Settings are canceled.
• When the power is turned off by power
failure or by unplugging the power cord,
settings will be canceled.
• Before unplugging the power cord, press
Standby/On and check that “--OFF--”
disappears in the display.
–
Playback doesn’t follow the • The DVD Player is in repeat playback
• Resume normal playback.
28-33
16
course of the disc’s
programs.
mode, memory playback mode, or
random playback mode, etc.
The buttons on the remote • Power supply fluctuations or other
• Switch off the main power, then switch it
on again. If not recovered, disconnect the
mains lead, then connect it again.
controller and DVD Player
do not operate.
abnormalities such as static electricity
may interrupt correct operation.
mark appears on
screen.
• The selected function does not operate
for that disc.
–
–
mark appears on
screen.
• The operation is prohibited by the player.
–
–
When making changes in
the Setup screen menus,
is displayed.
• There is a Video CD, CD or MP3 loaded
in the player and the setting that was
changed only applies to DVD
performance.
• The setting will be effective the next time
a DVD is loaded.
42
Some settings in the Setup • The [Setup Menu Mode] is set to [Basic].
Set the [Setup Menu Mode] to [Expert].
42
Menu do not appear.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
Pages
No sound is reproduced.
•
The Setup screen Audio menu [Linear PCM • Either connect using the analog outputs,
44
Out] setting is set to [Down Sample Off].
or set [Linear PCM Out] in the Audio
menu to [Down Sample On].
• Set [Digital Out] to [On].
• The Setup screen Audio menu [Digital
44
Out] is set to [Off].
• A wrong sound signal conversion method • Check the current sound signal
43, 44
is selected.
conversion method, and select the right
setting.
• The pause mode is engaged.
• The volume level of TV or amplifier is set
to minimum.
• Press £ or 8 to exit the pause mode.
• Increase the volume level.
25
–
The screen is stretched or
aspect does not change.
• The multi aspect setting is not
appropriate.
• Change the aspect setting in the [TV
Screen] setting in the Setup screen Video
1 menu to the screen type most
appropriate to the TV or monitor you are
using.
47
• The TV is connected with an S-video
cord.
• If you connected your TV with an S-Video 48
cord, in rare cases the TV picture may
appear stretched. In this case switch the
output from [S2] to [S1]
Some MP3 tracks appear
to be missing from a disc.
• The track name does not end in “.mp3” or • This system will not recognize file that
5
5
5
“.MP3”.
does not end in ".mp3" or ".MP3" as an
MP3 track. Change the track name.
• This player only recognizes the first 250
folders and tracks on a disc. If there are
more folders/tracks than this, you will not
be able to play them.
• More than 251 folders and tracks are
recorded on a disc.
• A multi-session disc is inserted.
• This player is not compatible with multi-
session discs. If the disc is multi-session,
you will only be able to play tracks
recorded onto the first session.
The buttons on the DVD
Player operates but the
buttons on the remote
controller do not operate.
• No batteries are inserted in the remote
controller.
• The batteries are worn out.
• Insert new batteries.
9
• Replace with new batteries.
9
9
• The remote controller is not pointed at the • Point the remote controller at the remote
remote sensor of the DVD Player.
• The remote controller is too far from the
DVD Player.
sensor of the DVD Player.
• Operate the remote controller within 5 m.
9
Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static
electricity. If this happens, press the Power switch on the unit and then press it again after about five seconds.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD Player
Power supply
AC 120 V, 60 Hz
Power consumption
Power consumption (standby mode)
Weight
25 W
1.4 W
3.6 kg, 7.9 lbs.
External dimensions
Signal system
435 × 91 × 314 mm (W/H/D), 17-1/8" × 3-9/16" × 12-5/16"
Standard NTSC
Regional restriction code
Laser
1
Semiconductor laser, wavelength 650 nm, 780 nm
Frequency range (digital audio)
DVD linear sound:
48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
192 kHz sampling 4 Hz to 96 kHz
4 Hz to 20 kHz
DVD-Audio:
Audio CD:
Signal-to-noise ratio (digital audio)
Audio dynamic range (digital audio)
Harmonic distortion (digital audio)
Wow and flutter
106 dB
100 dB
0.005 %
Below measurable level ( 0.001 % (W.PEAK))
Operating conditions
Temperature: 5°C to 35°C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 2
S-video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 2
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 2
(PB)/(PR) 0.7 V (p-p), 75 Ω
Audio output (digital output Optical)
Audio output (digital output Coaxial)
Audio output (analog audio)
Optical connecter × 2
0.5 V (p-p), 75 Ω, pin jack × 1
2.0 V (rms), 440 Ω, pin jack (L, R) × 2
Audio output (5.1 channel analog audio) 2.0 V (rms), 440 Ω, pin jack (FRONT L, FRONT R, CENTER, SURR L,
SURR R, SUB WOOFER) × 1
Specifications and features are subject to change without notice.
Integra Division of
ONKYO U.S.A. CORPORATION
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.
Integra Division of
ONKYO CORPORATION
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
W0207-1
SN 29343388
Download from Www.Somanuals.com. All Manuals Search And Download.
|