ENGLISH
GETTING STARTED
BASIC OPERATIONS
6
DIGITAL MEDIA CAMERA
19
(RECORDING & PLAYBACK)
GZ-MC100
MENU SETTINGS
26
32
REFERENCES
To deactivate the demonstration, set
“DEMO MODE” to “OFF”. (੬ pg. 26)
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the battery pack
mount of the camera. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
This instruction manual describes the basic operations of the camera.
For more information, read the advanced operation manual provided
as HTML format in the CD-ROM. See page 32 for details.
EN
LYT1337-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
Dear Customer,
NOTES:
Thank you for purchasing this digital media camera. Before
use, please read the safety information and precautions
contained in the pages 3 – 4 to ensure safe use of this
product.
● The rating plate (serial number plate) and safety caution
are on the battery pack mount of the main unit.
● The rating information and safety caution of the AC
adapter are on its upper and lower sides.
This product has a fluorescent lamp that contains a small
amount of mercury. Disposal of these materials may be
regulated in your community due to environmental
considerations.
SAFETY PRECAUTIONS
For disposal or recycling information please contact your
local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org>
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
When the equipment is installed in a cabinet or on a shelf,
make sure that it has sufficient space on all sides to allow
for ventilation (10 cm (3-15/16") or more on both sides, on
top and at the rear).
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or
cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should
be placed on the apparatus.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
When discarding batteries, environmental problems must
be considered and the local rules or laws governing the
disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Do not use this equipment in a bathroom or places with
water.
Also do not place any containers filled with water or liquids
(such as cosmetics or medicines, flower vases, potted
plants, cups etc.) on top of this unit.
CAUTIONS:
● This camera is designed to be used with NTSC-type
color television signals. It cannot be used for playback
with a television of a different standard. However, live
recording and LCD monitor playback are possible
anywhere.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
● Use the JVC BN-VM200U battery pack and, to recharge
it or to supply power to the camera from an AC outlet,
use the provided multi-voltage AC adapter. (An
appropriate conversion adapter may be necessary to
accommodate different designs of AC outlets in different
countries.)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
12. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
not operate normally, or has been dropped.
Do not point the lens directly into the sun. This can cause
eye injuries, as well as lead to the malfunctioning of internal
circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to
the camera and to the user.
Carrying or holding the camera by the LCD monitor can
result in dropping the unit, or in a malfunction.
Before Using this Camera
This camera is designed exclusively for CompactFlash
Card (CF card) and SD Memory Card.
Do not use a tripod on unsteady or unlevel surfaces. It could
tip over, causing serious damage to the camera.
CAUTION!
The removable hard disk (provided) or Microdrive is a
type of CF card compliant with CF+ Type II.
Connecting cables (Audio/Video, S-Video, etc.) to the
camera and leaving it on top of the TV is not recommended,
as tripping on the cables will cause the camera to fall,
resulting in damage.
This camera records video in MPEG2 format compliant
with SD-VIDEO format.
Remember that this camera is not compatible with other
digital video formats.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Remember that this camera is intended for private
consumer use only.
Any commercial use without proper permission is prohibited.
(Even if you record an event such as a show, performance or
exhibition for personal enjoyment, it is strongly recommended
that you obtain permission beforehand.)
Before recording important video, be sure to make a trial
recording.
Play back your trial recording to make sure the video and
audio have been recorded properly.
Also read “Cautions” on pages 37 to 39.
9. Only use attachments/accessories specified by the
manufacturer.
10. Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
11. Unplug this apparatus during
lightning storms or when
unused for long periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
● Manufactured under licence from Dolby Laboratories.
“Dolby” and double-D symbol are trademarks of Dolby
Laboratories.
Other cautions
● Condensation can cause the drive to break down. If water is
splashed on the drive, make sure that it is completely dried
before usage.
®
● Microdrive is a registered trademark of Hitachi Global
Storage Technologies, Inc. in the United States and/or other
countries.
● Do not use, replace, or store the disk in locations that are
exposed to strong static electricity or electrical noise.
● Do not turn off the camera power or remove the battery or
AC adapter during shooting, playback, or when otherwise
accessing the recording medium.
● Do not bring the recording medium near objects that have a
strong magnetic field or that emit strong electromagnetic
waves.
● Since data must be read and written by the drive correctly,
the camera may be unable to shoot when the camera heats
up, such as during continuous shooting, or when the
camera is cooled down during usage in a cold location. To
fix this problem, follow the messages displayed on the
screen. (੬ pg. 36)
● To maintain high performance, perform check disks (error
checks) using your computer on a regular basis. Use a USB
cable to connect the camera and PC, and then perform the
check disk on the removable hard disk using the same
procedure as a regular local disk (C drive). Refer to the
instruction manual of your PC for check disks.
● Clean up the disk regularly to maintain high performance.
(੬ pg. 27)
●
MascotCapsule is registered trademark of HI
CORPORATION in Japan.
● Other product and company names included in this
instruction manual are trademarks and/or registered
trademarks of their respective holders.
Removable Hard Disk
The removable hard disk is a precision electronic device.
Be careful when handling it.
Cautions for external jolt or stress
● After removing the disk from the camera, store it by
inserting into the supplied protective case.
● Do not press on the cover.
● Do not subject the disk to
vibrations or sudden jolts. Be
especially careful to avoid
sudden jolts when shooting or
during playback.
Also read “Recording Medium” on page 38.
● Do not affix stickers or write on the label.
● Do not apply strong pressure to the outside of the disk.
Also, do not put it in your pants pocket or other location
where it can be pressed on.
Be careful to completely delete data when discarding or
giving away the removable hard disk.
When recording data is formatted or deleted on the camera,
this only modifies the file management information, and the
data is not completely erased. When discarding or giving
away the removable hard disk, to prevent problems caused by
the release of sensitive information, it is extremely important
that the customer take responsibility to erase all recorded
data. Some recommended methods of erasing data include
using a commercial data removal program or using a hammer
or strong magnet to physically or magnetically destroy the
data on the hard disk so that it cannot be read. JVC shall not
be responsible for any personal data that is released.
Cautions for temperature
● The camera’s protection circuit may work for the proper
recording or playback when the camera’s internal
temperature rises or during usage in a cold location.
(੬ pg. 36)
● The camera and removable hard disk can heat up when
used for an extended period. However, this is not a
malfunction.
● The disk can heat up when used for an extended period.
Therefore, do not remove it immediately from the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
6
EN
Index
ATTENTION:
● Be careful not to cover V, Z, b, c
and d during shooting.
● Be careful not to cover W during
playback.
The top, buttom, left or right sides of
the 49rtwe button can be
pressed to operate like a lever. The
explanation “pressing r” in this
instruction manual means moving
the 49rtwe button in the r
direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
7
Controls
S Mode Lamp [
(੬ pg. 19)
(video),
(still image), (voice)]
A Delete Button [ ] (੬ pg. 21, 23, 24)
B Information Button [INFO] (Used to display the file
information. Refer to the advanced operation manual.
੬ pg. 32)
T Access Lamp (Lights up or blinks when you access to
any files. Do not turn off the power or remove the
battery pack/AC adapter while accessing to files during
recording or playback.)
C Mode Button [MODE] (੬ pg. 19)
D Recording Start/Stop Button (੬ pg. 20)
E Zoom Lever [T/W] (੬ pg. 20)
U Power/Charge Lamp (੬ pg. 14, 19)
Speaker Volume Control (੬ pg. 21)
F Rear Panel Open Switch [OPEN] (੬ pg. 16)
Other Parts
Y Rear Panel (Recording media cover) (੬ pg. 16)
Z Camera Sensor
G Power Switch [OFF,
,
] (੬ pg. 19)
H Lock Button (੬ pg. 19)
I Menu Button [MENU] (੬ pg. 26)
J Play/Pause Button [49] (੬ pg. 21)
K Reverse Search Button [w (3)] (੬ pg. 21)
Left Button [w] (੬ pg. 26)
Flash Button [ ] (Used to change the flash mode.
Refer to the advanced operation manual. ੬ pg. 32)
L Forward Skip Button [t (6)] (੬ pg. 21)
Down Button [t] (੬ pg. 26)
Manual Set Button [ SET] (੬ pg. 31)
M Forward Search Button [e (5)] (੬ pg. 21)
Right Button [e] (੬ pg. 26)
a Battery Cover (੬ pg. 14)
b Lens
c Flash Sensor
d Flash
e Hand Strap Eyelet (੬ pg. 12)
f Tripod Mounting Socket
Auto/Manual Mode Switch [
] (੬ pg. 19)
N Reverse Skip Button [r (2)] (੬ pg. 21)
Up Button [r] (੬ pg. 26)
Backlight Compensation Button [ ] (Used to engage
backlight compensation. Refer to the advanced
operation manual. ੬ pg. 32)
Connectors
The connectors are located beneath the covers.
O USB (Universal Serial Bus) Connector (Refer to the
software installation and USB connection guide.)
P Headphone connector [ ] (੬ pg. 13)
Q S-Video/Audio/Video Output Connector [AV] (੬ pg. 25)
R DC Input Connector [DC] (੬ pg. 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
8
EN
During Video Recording only
Indications on LCD Monitor
During both Video and Still Image Recording
A Mode Indicator (੬ pg. 19)
C Wind Cut Indicator (੬ pg. 28)
D Picture Quality: [U] (ultra fine), [F] (fine), [N] (normal),
[E] (economy) (੬ pg. 28)
E Remaining Time (੬ pg. 20, 42)
F Counter (੬ pg. 27)
G 7REC: (Appears during recording.) (੬ pg. 20)
79: (Appears during record-standby mode.)
(੬ pg. 20)
A Manual Mode Indicator (੬ pg. 19)
B Tele Macro Mode Indicator (੬ pg. 28)
C Approximate Zoom Ratio (੬ pg. 20, 28)
D Zoom Indicator (੬ pg. 20, 28)
E Iris Lock Indicator (Appears when iris is locked. Refer to
the advanced operation manual. ੬ pg. 32)
F Shutter Speed (੬ pg. 31)
H Digital Image Stabilizer (DIS) (੬ pg. 28)
G Brightness Control Indicator (੬ pg. 27)
H Battery Indicator
I Date/Time (੬ pg. 27)
J Selected Medium Indicator (੬ pg. 17, 27)
K Manual Focus Adjustment Indicator (੬ pg. 31)
L Effect Mode Indicator (੬ pg. 31)
M Program AE Mode Indicator (੬ pg. 31)
N White Balance Indicator (੬ pg. 31)
O
: Exposure Adjustment Indicator (੬ pg. 31)
: Backlight Compensation Indicator (Appears when
backlight compensation is engaged. Refer to the
advanced operation manual. ੬ pg. 32)
: Spot Exposure Control Indicator (Appears when
spot exposure control is engaged. Refer to the
advanced operation manual. ੬ pg. 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
9
During Still Image Recording only
During Voice Recording
A Mode Indicator (੬ pg. 19)
B
: Focus Icon (੬ pg. 22)
C Image Size: 1600 (1600 x 1200), 1280 (1280 x 960),
1024 (1024 x 768), 640 (640 x 480) (੬ pg. 29)
D Picture Quality: FINE (fine) and STANDARD (standard)
(੬ pg. 29)
E Flash Indicator (Appears when flash mode is engaged.
Refer to the advanced operation manual. ੬ pg. 32)
F Remaining Number Of Shots (੬ pg. 42)
G Continuous Shooting Mode (੬ pg. 22)
H Shooting Icon (੬ pg. 22)
A Remaining Time (੬ pg. 43)
B Selected Medium Indicator (੬ pg. 17, 27)
C Sound Quality: 48 (fine), 16 (standard), 8 (economy)
(੬ pg. 30)
D Recording Level:
(੬ pg. 30)
(high),
(middle),
(low)
E Wind Cut Indicator (੬ pg. 28)
F Counter
G Battery Indicator
(Appears during shooting.)
I Self-Timer Recording Indicator (੬ pg. 29)
H Date/Time (੬ pg. 27)
I Microphone Input Level Indicator
J Recording Mode
7: Record
: Record-standby
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
10
B Folder/File Number
During Video Playback
C U : Slide Show (੬ pg. 23)
D Battery Indicator
E Date/Time (੬ pg. 27)
F Selected Medium Indicator (੬ pg. 17, 27)
A Mode Indicator (੬ pg. 19)
B Play List Playback Indicator (Appears when play list is
played back. Refer to the advanced operation manual.
੬ pg. 32)
C Picture Quality: [U] (ultra fine), [F] (fine), [N] (normal),
[E] (economy) (੬ pg. 28)
D Playback Mode (੬ pg. 21)
U : Playback
9 : Pause
A Playback Speed:
(੬ pg. 30)
B Selected Medium Indicator (੬ pg. 17, 27)
C Sound Quality: 48 (fine), 16 (standard), 8 (economy)
(੬ pg. 30)
D Counter
(normal),
(fast),
(slow)
5
: Forward High-Speed Search
: Reverse High-Speed Search
3
9U : Forward Slow-Motion
Y9 : Reverse Slow-Motion
(The number on the left shows speed.)
E Counter (੬ pg. 27)
F Volume Level Indicator
G Battery Indicator
H Selected Medium Indicator (੬ pg. 17, 27)
I Effect Mode Indicator (੬ pg. 31)
J Wipe/Fader Effect Indicator (੬ pg. 29)
E Battery Indicator
F Date/Time (੬ pg. 27)
G Volume Level Indicator
H Playback Mode (੬ pg. 24)
U : Playback
5
: Forward High-Speed Search
: Reverse High-Speed Search
3
9 : Pause
8 : Stop
I Recording Level Indicator
J Folder/File Number
During Still Image Playback
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
11
A AC Adapter AP-V14U
Provided Accessories
B Battery Pack BN-VM200U
C S-Video/Audio/Video Cable
D USB Cable
E Removable Hard Disk (4 GB)
F Protective Case for Removable Hard Disk
G Hand Strap (See page 12 for attachment)
H Lens Cap (See page 12 for attachment)
I CD-ROM
J Audio Extension Cable (for optional headphone, see
page 13 for attachment)
K Core Filter for cables (See page 13 for attachment)
Large: S-Video/Audio/Video Cable
Medium: USB cable
Small: audio extension cable and AC adapter’s cord
NOTES:
● In order to maintain optimum performance of the camera,
provided cables may be equipped with one or more core
filter. If a cable has only one core filter, the end that is
closest to the filter should be connected to the camera.
● Make sure to use the provided cables for connections. Do
not use any other cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
12
Attaching the Hand Strap
Attaching the Lens Cap
To protect the lens, attach the provided lens cap to the
camera as shown in the illustration.
1 Thread the end of the strap
through the eyelet.
2 Pass the other end through
NOTE:
the loop.
To confirm the lens cap is on
correctly make sure the cap is
flush to the camera.
NOTE:
When carrying the
camera, pass your arm
through the strap to
prevent dropping the
camera. Tighten the
strap at your wrist by
sliding the buckle.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
13
3 Close the core filter until it clicks shut.
Attaching the Core Filter
Attach the core filters to the cables. The core filter reduces
interference.
S-Video/Audio/Video
cable
USB cable, audio extension
cable and AC adapter’s cord
1 Release the stoppers on both ends of the core filter.
Stopper
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the core filter
to the camera.
2 Run the cable through the core filter, leaving approx.
3 cm of cable between the cable plug and the core filter.
S-Video/Audio/Video cable
Wind the cable once around the outside of the core filter
as shown in the illustration.
How to Use the Audio Extension Cable
When using optional headphones, connect to the
provided audio extension cable (with a core filter
attached), then connect the audio extension cable to the
camera. The core filter reduces interference.
Core filter (large)
3 cm (1-3/16")
Open the cover.
Wind once.
To
Headphones
USB cable, audio extension cable and AC adapter’s
cord
Wind the cable twice around the outside of the core filter
as shown in the illustration.
Core Filter
Core filter (medium: USB cable,
small: audio extension cable and
3 cm (1-3/16")
AC adapter’s cord)
Audio Extension Cable (provided)
Wind twice.
● Wind the cable so that it is not slack.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
14
1 Set the power switch to OFF while pressing down the
Power
lock button located on the switch.
2 Slide and remove the battery cover A by hooking on
This camera’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
the part with your finger.
3
Insert the battery pack firmly into the battery pack mount
until it locks into space in the direction of the arrow
4 Close the battery cover firmly until it locks.
5 Connect the AC adapter to the camera.
B.
Charging the Battery Pack
6 Plug the AC adapter into an AC outlet. The power/
charge lamp on the camera blinks to indicate charging
has started.
Battery Cover
7 When the power/charge lamp goes out, charging is
finished. Unplug the AC adapter from the AC outlet.
Disconnect the AC adapter from the camera.
To detach the battery pack
Open the battery cover, and remove the battery pack in
the direction of the arrow C by holding the part.
Open the cover.
Battery Pack
Protrusion
To DC
connector
AC Adapter
Power/Charge
Lamp
Lock Button
Battery pack
Charging time
BN-VM200U (provided) Approx. 1 hr. 35 min.
To AC outlet
Power Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
15
NOTES:
NOTES:
● It is recommended that only genuine JVC batteries are used ● Recording time is reduced significantly under the following
in this camera. Using generic non-JVC batteries can cause
damage to the internal charging circuitry.
● If the protective cap is attached to the battery pack, remove
conditions:
• Zoom or record-standby mode is engaged repeatedly.
• Playback mode is engaged repeatedly.
● Before extended use, it is recommended that you prepare
enough battery packs to cover 3 times the planned
recording time.
it first.
● When charging the battery pack for the first time or after a
long storage period, the power/charge lamp may not light. In
this case, remove the battery pack from the camera, then try
charging again.
● If the battery operation time remains extremely short even
after having been fully charged, the battery is worn out and
needs to be replaced. Please purchase a new one.
● Since the AC adapter processes electricity internally, it
becomes warm during use. Be sure to use it only in well-
ventilated areas.
Using AC Power
Connect the AC adapter to the camera as shown in the
illustration. (੬ pg. 14)
NOTE:
The provided AC adapter features automatic voltage selection
in the AC range from 110 V to 240 V.
ATTENTION:
Using the Battery Pack
Perform steps 2 – 4 in “Charging the Battery Pack”.
● Before detaching the power source, make sure that the
camera’s power is turned off. Failure to do so can result in a
camera malfunction.
Maximum continuous recording time
● If a malfunction occurs by electrostatic discharge, the power
source should be terminated to reset the device.
Battery pack
Recording time
1 hr. 5 min.
BN-VM200U (provided)
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a
fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short
circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large
power capacity. However, when one is exposed to cold
temperatures (below 10°C/50°F), its usage time becomes
shorter and it may cease to function. If this happens,
place the battery pack in your pocket or other warm,
protected place for a short time, then re-attach it to the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
16
5 To insert a CF card, firmly insert it as shown in the
illustration.
To remove a CF card, push the eject button twice.
the eject button once again ejects the CF card.
Inserting/Removing a CF Card
You can use a CF card (CompactFlash card) as a
recording medium in the CF slot.
The removable hard disk (provided) or Microdrive is a type
of CF cards. See page 42 for the recommended media.
6 Close the rear panel firmly until it locks.
NOTES:
Medium”)
● Before using a new CF card, it is necessary to format the CF
card. (੬ pg. 27)
OPEN
ATTENTION:
● Do not insert or remove the CF card while the camera is
or not the CF card is installed.
Rear Panel
Eject Button
● Do not squeeze the external covers of the CF card.
CF Slot
Front
Inserting/Removing an SD Card
You can use an SD card as a recording medium in the SD
slot. See page 42 for the recommended media.
Terminals
Write/Erase
Clipped edge
Protection Tab
SD Slot
1 Make sure the camera’s power is off.
2 Open the LCD monitor fully. (੬ pg. 18)
Terminals
3 Slide and hold OPEN in the direction of the arrow B,
then open the rear panel.
4 When the eject button is pulled out as shown in the
SD card
illustration, push it once.
● The button is pushed in.
1 Perform steps 1 – 3 in “Inserting/Removing a CF
Card”.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
17
2 To insert a SD card, firmly insert it with its clipped
edge first.
To remove a SD card, push it once. After the SD card
comes out of the camera, pull it out.
● Do not touch the terminal on the reverse side of the label.
Selecting Recording Medium
Select the recording medium before starting recording or
playback.
Example: When recording still images to a CF card
3 Close the rear panel firmly until it locks.
To protect valuable files
Slide the write/erase protection tab on the side of the SD
card in the direction of “LOCK”. This prevents the SD card
from being recorded over. To record on this SD card, slide
the tab back to the position opposite to “LOCK” before
inserting it.
1 Open the LCD monitor fully. (੬ pg. 18)
2 Set the power switch to
or
while pressing down
the lock button located on the switch.
3 Press MENU. The menu screen appears.
4 Press rt to select [MEMORY
DIS
CARD SETTING], and press 49.
CAMERA SETTING
BASIC SETTING
NOTE:
MEMORY CARD SETTING
Before using a new SD card, it is necessary to format the
DISPLAY
QUALITY
card. (੬ pg. 26, 27)
WIDE MODE
ATTENTION:
5 Press rt to select [IMAGE
MODE], and press 49.
Do not insert or remove the SD card while the camera is
turned on, as this may cause the SD card to be corrupted or
cause the camera to become unable to recognize whether or
not the SD card is installed.
COPY/MOVE
NO. RESET
VIDEO MODE
6 Press rt to select [CF SLOT],
IMAGE MODE
VOICE MODE
and press 49.
FORMAT
CLEAN UP
7 Press MENU to return to the
normal screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
18
Date/Time Settings
The date/time is recorded on the picture at all times, but
its display can be turned on or off during playback.
(੬ pg. 26, 27)
LCD Monitor Adjustment
It is necessary to use the LCD monitor for the camera
operation. Make sure to open the LCD monitor whenever
you turn on the camera.
1 Open the LCD monitor fully.
2 Set the power switch to
or
while pressing down
the lock button located on the switch.
3 Press MENU. The menu screen appears.
4 Press rt to select [DISPLAY],
CAMERA SETTING
BASIC SETTEING
and press 49. The sub menu
appears.
MEMORY CARD SETTING
DISPLAY
QUALITY
WIDE MODE
WIND CUT
5 Press rt to select [CLOCK
ADJUST], and press 49. The
month is highlighted.
Pull on the bottom end of the LCD monitor to open it.
● The LCD monitor can be rotated 270° (90° downward,
180° upward).
SCENE COUNTER
CLOCK ADJUST
BRIGHT
6 Press rt to input the month,
and press 49. Repeat to input
the day, year, hour and minute.
NOTES:
DATE/TIME
● If the LCD monitor is rotated 180° upward, the LCD monitor
faces to the front. It is useful when using self-timer for
shooting.
7 Press MENU to return to the normal screen.
● When the LCD monitor is turned approx. 80° to front, the
monitor image appears inverted as it would when viewing a
mirror. However, the actual recorded image does not appear
inverted.
Built-in Clock’s Rechargeable Lithium Battery
If the camera is not used for approx. 3 months, the clock’s
lithium battery will become discharged and the date/time
stored in memory will be lost. When this occurs, first
connect the camera to an AC outlet using the AC adapter
for over 24 hours to charge the clock’s rechargeable
lithium battery. Then perform the date/time setting before
using the camera.
Note that the camera can be used without setting the
date/time.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
19
2 Recording/Playback Mode
Press MODE to select the recording/playback mode.
Operation Mode
To turn on the camera, set the power switch to
while pressing down the lock button located on the switch.
● The power/charge lamp turns on.
To turn off the camera, set the power switch to OFF.
or
The selected mode lamp lights up.
: Video mode (੬ pg. 20, 21)
: Still image mode (੬ pg. 22, 23)
: Voice mode (੬ pg. 24)
1 Power Switch
3 Auto/Manual Mode
2
MODE
Press e (
) to switch the auto/manual recording
mode. When manual mode is selected, the indicator
appears on the LCD monitor.
Mode Lamp
e (
)
3
Auto mode:
You can record using no special effects or
manual adjustments.
Lock Button
Power/Charge Lamp
Manual mode:
Manual recording is possible by setting
various functions.
Set the appropriate operation mode according to your
preference using the power switch, MODE and e (
buttons.
)
)
1 Power Switch Position
Set the power switch for recording ( ) or playback (
while pressing down the lock button.
Power-Linked Operation
When the power switch is set to
, you can also turn on/
off the camera by opening/closing the LCD monitor.
Power off
Recording
Playback
Power Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
20
● If data cannot be recorded or saved properly, the video files
are not saved to the [SD_VIDEO] folder for regular video.
Instead, the files are saved to the [EXTMOV] folder used for
saving files created on the PC. To play back these files, see
“Playing back files created on the PC” (੬ pg. 21).
Video Recording
Power Switch
MODE
● For approximate recording time, see page 42.
Recording Start/Stop Button
Zooming
Zoom Lever
Produces the zoom in/out effect, or an instantaneous
change in image magnification.
Lock Button
Zoom In
Slide the zoom lever towards T.
Zoom Out
Slide the zoom lever towards W.
while pressing down the
lock button located on the switch.
2 Press MODE to select
.
W: Wide angle
T: Telephoto
● The camera is programmed to record videos on the medium
in the CF slot by the factory preset. To switch the recording
medium, see pages 26 and 27.
● To change the picture quality, see pages 26 and 28.
3 Press the recording start/stop button to start recording.
● Approximate remaining time for
recording appears on the display.
4 To stop recording, press the
recording start/stop button again.
● The further you slide the zoom lever, the quicker the zoom
action.
● Refer to the advanced operation manual for details.
(੬ pg. 32)
NOTES:
● If the record-standby mode continues for 5 minutes when
using the battery pack, the camera’s power shuts off
automatically. To turn the camera on again, set the power
Deleting Files
switch to OFF then to
, or close the LCD monitor then
open it again. When using AC adapter, the camera enters
the power save mode. To cancel the power save mode,
perform any operation such as zooming.
● When the camera heats up, the [REC] indicator flashes. If
the camera continues to heat up, shooting may be stopped
to protect the recording medium. In this case, turn off the
camera power, and then wait until the camera cools down.
(੬ pg. 36)
If you press
most recently will be deleted.
● However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
during recording mode, the file recorded
● When shooting continuously, shooting is automatically
stopped when a file size of 4 GB is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
21
Playing back files created on the PC
[EXTMOV] folder. (Refer to “SOFTWARE INSTALLATION
AND USB CONNECTION GUIDE”.)
Video Playback
MODE
To play these video files, press the recording start/stop
button while the index screen is displayed in step 2, and
then proceed to step 3 after [MPG] is displayed.
● The fast forward, rewind, slow, frame-by-frame playback,
and playlist creation functions are not available for files in the
[EXTMOV] folder.
INFO
Zoom Lever
2
3
Lock Button
NOTES:
● The playback picture can be viewed in the LCD monitor or
on a connected TV. (੬ pg. 25)
Power Switch
49
● If pause mode continues for 5 minutes during playback
(video, still image or voice) when using the battery pack, the
camera’s power shuts off automatically. To turn the camera
on again, set the power switch to OFF, then to
.
● When a cable is connected to the AV connector, the sound
is not heard from the speaker or headphones.
6
5
Various Playback Operations
1 Set the power switch to
while pressing down the
lock button located on the switch.
High-speed search
2 Press MODE to select
.
Press
3
or
5
during playback.
● The index screen for videos appears. The image appears on
the index screen shows the first part of the shooting.
● To switch the medium to be played back, see pages 26 and
27.
● Each press of the button increases the search speed for
each direction. (–60x to +60x)
Locating the start point of the file or skip the file
Press
Frame-by-frame playback
Press or during pause mode.
2
or
6
during playback or pause mode.
3 Press rt w e to select the video file you want to play
back.
4 Press 49 to start playback.
3
5
● Each press of the button advances/reverses the still picture
frame by frame.
5 To pause playback, press 49 again.
To adjust the speaker volume
Slow motion playback
During playback slide the zoom lever towards T to turn up
the volume, or towards W to turn down the volume.
Press
mode.
3
or
5
for 2 or more seconds during pause
How to use INFO button
Press INFO repeatedly. You can display the file
information or remove the on-screen display.
Deleting Video Files
Press , then press rt to select [EXECUTE] and press
49.
● You can select the desired file to be deleted by pressing w
e.
● To delete multiple files at once, see pages 26 and 29.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
22
NOTES:
Still Image Recording
● If shooting is not performed for approx. 5 minutes when
using the battery pack, the camera’s power shuts off
automatically. To perform shooting again, set the power
Power Switch
switch to OFF, then to
. When using AC adapter, the
● To turn the shutter sound off, see page 26.
MODE
● For approximate number of storable images, see page 42.
Continuous Shooting
Lock Button
Keeping the recording start/stop button pressed in step 3
provides an effect similar to serial photography. (Interval
between still images: approx. 0.3 seconds)
To use this function, set [CONTINUOUS SHOOTING] to
[ON]. (੬ pg. 26, 29)
● Continuous shooting may not work well depending on
the recording medium.
When shooting with the flash, be
carefull not to cover it.
Deleting Files
If you press
during recording mode, the file recorded
most recently will be deleted.
● However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
1 Set the power switch to
while pressing down the
lock button located on the switch.
2 Press MODE to select
.
● The camera is programmed to record still images on the
medium in the SD slot by the factory preset. To switch the
recording medium, see pages 26 and 27.
● To change the image size and picture quality, see pages 26
and 29.
3 Press the recording start/stop button. The still image is
recorded.
● To check how the image looks before recording, press the
recording start/stop button halfway and hold. The
indicator appears and stops blinking when the captured
image is focused. To cancel the recording, release the
recording start/stop button. To record it on the recording
medium, press the recording start/stop button fully.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
23
Slide Show
You can playback all the images stored in recording media
automatically.
MODE
1 Perform steps 1 – 2 in the left column.
INFO
Zoom Lever
2 Press 49 to start the slide show.
● If you press t during the slide show, files are displayed
in descending order.
3
● If you press r during the slide show, files are displayed
in ascending order.
Lock Button
Power Switch
49
To display the next
image
To display the
previous image
Normal Playback
5
1 Set the power switch to
while pressing down the
lock button located on the switch.
Slide Show
2 Press MODE to select
.
● A still image is displayed.
● To switch the medium to be played back, see pages 26 and
27.
Deleting Still Image Files
Press , then press rt to select [EXECUTE] and press
3 Press
3
to display the previous file. Press
5
to
49.
display the next file.
● You can select the desired file to be deleted by pressing w
How to use INFO button
e.
Press INFO repeatedly. You can display the file
information or remove the on-screen display.
● To delete multiple files at once, see pages 26 and 29.
NOTES:
● Images shot and stored on the recording media with another
device may not be played back correctly.
● You can zoom in/out or rotate still images. For details, read
the advanced operation manual. (੬ pg. 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
24
Voice Recording
Voice Playback
1 Set the power switch to
while pressing down the
lock button located on the switch.
2 Press MODE to select
.
Zoom Lever
● To change the playback speed, see pages 26 and 30.
● To switch the medium to be played back, see pages 26 and
27.
Recording Start/Stop
Button
3 Press 49 to start playback.
2
3
4 To pause playback, press 49 again.
Lock Button
To adjust the speaker volume
Power Switch
During playback slide the zoom lever towards T to turn up
the volume, or towards W to turn down the volume.
49
Playback Operations
High-Speed Search
6
5
Press
3
or
5
during playback.
Locating the start point of the file or skip the file
Press or during playback or pause mode.
1 Set the power switch to
while pressing down the
lock button located on the switch.
2
6
2 Press MODE to select
.
Deleting Voice Files
Press , then press rt to select [EXECUTE] and press
● The camera is programmed to record voice on the medium
in the SD slot by the factory preset. To switch the recording
medium, see pages 26 and 27.
49.
● You can select the desired file to be deleted by pressing w
● To change the sound quality and recording level, see pages
26 and 30.
e.
● To delete multiple files at once, see pages 26 and 29.
3 Press the recording start/stop button to start recording.
4 To stop recording, press the recording start/stop button
again. The camera re-enters the record-standby mode.
NOTE:
For approximate recording time, see page 43.
Deleting Files
If you press
during recording mode, the file recorded
most recently will be deleted.
● However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
EN
25
6 Start playback on the camera. (੬ pg. 21)
Connecting to a TV or VCR
To choose whether or not the following displays
appear on the connected TV
● Date/Time
Open the cover.
Set [DATE/TIME] to [AUTO], [ON] or [OFF]. (੬ pg. 26, 27)
● Counter
Set [SCENE COUNTER] to [ON] or [OFF]. (੬ pg. 26, 27)
(Pressing INFO button also turns on/off the displays.)
NOTES:
To AV connector
● It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (੬ pg. 14)
● To monitor the picture and sound from the camera without
inserting a recording medium, set the camera’s power switch
S-Video/Audio/Video
Cable
to
, then set your TV to the appropriate input mode.
(provided)
● Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camera is
turned on.
● To connect the camera to a PC, refer to the software
installation and USB connection guide.
Dubbing to a VCR
TV
VCR
1 Perform step 1 to 6 above.
2 At the point you want to start dubbing, start recording
A Black to S-VIDEO IN (Connect when your TV/VCR has
S-VIDEO IN and A/V input connectors. In this case, it is
not necessary to connect the yellow video cable.)
B Yellow to VIDEO IN (Connect when your TV/VCR has
only A/V input connectors.)
on the VCR. (Refer to the VCR’s instruction manual.)
3 To stop dubbing, stop recording on the VCR, then stop
playback on the camera.
C Red to AUDIO R IN*
D White to AUDIO L IN*
* Not required for watching still images only.
1 Make sure all units are turned off.
2 Connect the camera to a TV or VCR as shown in the
illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input, referring to
your VCR’s instruction manual.
4 Turn on the camera, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to
its VIDEO mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
EN
26
NOTE:
Changing the Menu Settings
You can change the menu settings to customize your
camera. Access the desired menu screen by following the
steps below, then change the various settings.
Information on the following pages (੬ pg. 26 – 31) are only
excerpts of menu settings.
Refer to the advanced operation manual in the CD-ROM for
the full descriptions. (੬ pg. 32)
MODE
INFO
Common Menus for All Modes
[ ] = Factory-preset
MENU
BASIC SETTING
r
w
Lock Button
PRESET
Power Switch
EXECUTE: Resets all settings to the factory-preset.
[CANCEL]: Returns to menu screen without executing
reset.
49
DEMO MODE
OFF: Disables the function.
[ON]: Activates demonstration mode and shows various
features on the display.
e
t
1 Select the operation mode.
For Recording Menus:
Set the power switch to
button located on the switch.
OPERATION
SOUND
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording.
[MELODY]: Instead of a beep, a melody sounds when any
operation is performed.
while pressing down the lock
For Playback Menus:
Set the power switch to
button located on the switch.
while pressing down the lock
2 Press MODE to select
(video),
(still image) or
(voice).
3 Press MENU. The menu screen appears.
4 Select the desired sub menu and menu item with rt
and 49.
● To return to the normal screen, press MENU.
● To display the operation guide, press INFO when the menu
screen is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
EN
27
MEMORY CARD SETTING
DISPLAY
VIDEO MODE
Media selection can be set for
each recording and playback
mode: video ( ), still image
BRIGHT
When this item is selected, the brightness control
indicator appears. Adjust the brightness of the display
[CF SLOT] / SD SLOT
IMAGE MODE
(
) or voice ( ).
using w e, then press 49.
CF SLOT / [SD SLOT]
VOICE MODE
CF SLOT: The CF card is
selected as a recording
medium.
SD SLOT: SD card is selected
as a recording medium.
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds
CF SLOT / [SD SLOT]
when the power switch is set from OFF to
ON: The date/time is always displayed.
.
FORMAT
[CF SLOT] / SD SLOT
You can format (initialize) a recording medium in the CF or
SD slot.
SCENE COUNTER
[OFF]: Disables the function.
ON: Displays the counter during video mode.
CLEAN UP
[CF SLOT] / SD SLOT
Writing speed of recording media tends to become slow
after long period of repeated use. To regain the speed,
execute cleanup periodically.
CLOCK ADJUST
੬ “Date/Time Settings” (੬ pg. 18)
COPY/MOVE
COPY / MOVE
You can copy or move still image files between recording
media in CF and SD slots.
NO. RESET
VIDEO / IMAGE / VOICE
By resetting the file number (name), a new folder will be
made. The new files you are going to make will be stored
in the new folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
EN
28
CAMERA SETTING
Video Recording Menus
[ ] = Factory-preset
ZOOM
10X: Only optical zoom is available up to 10X.
[40X]: Digital zoom is available up to 40X.
200X: Digital zoom is available up to 200X.
QUALITY
Select the desired picture quality.
Mode
Size (pixels) Bit rate
TELE MACRO
[OFF]: Disables the function.
(In order of the quality)
ON: You can shoot a subject as large as possible at a
distance of approx. 60 cm (2 ft).
[ULTRA FINE]
FINE
NORMAL
ECONOMY
720 x 480
720 x 480
720 x 480
352 x 240
8.5 Mbps
5.5 Mbps
4.2 Mbps
1.5 Mbps
WIDE MODE
[OFF]: Disables the function.
D.WIDE: The zoom range is extended beyond the
maximum optical zoom wide angle range.
WIND CUT
[OFF]: Disables the function.
ON: Helps cut down on noise created by wind.
GAIN UP
OFF: The image in the dark will be recorded with no
picture brightness adjustment.
[ON]: The image in the dark will be brightened. But the
overall appearance may become grainy.
.
DIS
OFF: Disables the function.
[ON]: Compensates for unstable images caused by
camera-shake, particularly at high magnification.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Video Playback Menus
Still Image Recording Menus
For the actual operations and details, refer to the
advanced operation manual.
[ ] = Factory-preset
QUALITY
[ ] = Factory-preset
[FINE] / STANDARD
Select the desired image quality.
PLAY LIST
PLAY LIST CONTENTS / EDIT / RENAME / DELETE
You can create a play list and view your original video
clips.
IMAGE SIZE
[1600 x 1200] / 1280 x 960 / 1024 x 768 / 640 x 480
Select the desired image size.
WIPE/FADER
SELF-TIMER
[OFF] / 2SEC / 10SEC
By setting the self-timer, a still image is recorded 2 or 10
seconds after pressing recording start/stop button.
[OFF] / FADER-WHITE / FADER-BLACK / FADER-B.W /
WIPE-CORNER / WIPE-WINDOW / WIPE-SLIDE /
WIPE-DOOR / WIPE-SCROLL / WIPE-SHUTTER
You can view videos with various effects of scene
transition.
CONTINUOUS
SHOOTING
EFFECT
[OFF] / ON
੬ “Continuous Shooting” (੬ pg. 22)
[OFF] / SEPIA / MONOTONE / CLASSIC FILM /
STROBE
You can view videos with special image effects.
GAIN
[80] / 160
PROTECT
Select the ISO sensitivity to the desired setting.
[CURRENT] / FILE SELECT / PROTECT ALL / CANCEL
ALL
You can protect files from accidental erasure.
NOTE:
The menu items of TELE MACRO are the same as in the
description on page 28.
DELETE
[CURRENT] / FILE SELECT / DELETE ALL
You can delete unnecessary files.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
EN
30
Still Image Playback Menus
Voice Playback Menus
[ ] = Factory-preset
[ ] = Factory-preset
DPOF
PLAYBACK
SPEED
੬ Advanced operation manual
[NORMAL] / FASTPLAY / SLOWPLAY
Select the desired voice playback speed.
DIRECT PRINT
੬ Advanced operation manual
NOTE:
The menu items of PROTECT and DELETE are the same as
in the description on page 29.
EFFECT
[OFF] / SEPIA / MONOTONE
You can view still images with special image effects.
NOTE:
The menu items of PROTECT and DELETE are the same as
in the description on page 29.
Voice Recording Menus
[ ] = Factory-preset
QUALITY
Select the desired sound quality.
Mode
Bit rate
(In order of the quality)
[FINE]
STANDARD
ECONOMY
1,536 kbps
512 kbps
256 kbps
RECORDING
LEVEL
[HIGH] / MIDDLE / LOW
Select the desired voice recording level.
NOTE:
The menu items of WIND CUT are the same as in the
description on page 28.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
EN
31
[ ] = Factory-preset
Menus for Manual Recording
(MSET Menu)
EXP.
[AUTO*] or [ 0**] / 6* or 2 (EV)**
Fine exposure adjustment is possible depending on the
shooting condition.
* For video recording
MODE
** For still image recording
FOCUS
[AUTO] /
(manual)
r
w
Lock Button
If correct focus may not be obtained depending on the
shooting condition, use the manual focus mode.
Power Switch
49
WB
[AUTO] / MWB / FINE / CLOUD / HALOGEN
You can adjust the white balance setting manually or
select an option.
SHUTTER
e (
)
t ( SET)
[AUTO] / 1/2 / 1/4 / 1/8 / 1/15 / 1/30 / 1/60 / 1/100 / 1/250
1/500 / 1/1000* / 1/2000* / 1/4000*
You can select the shutter speed depending on the
subject and shooting condition.
* Not available for still image recording.
1 Set the power switch to
while pressing down the
lock button located on the switch.
2 Press MODE to select or
3 Press e ( ) so that is displayed.
.
P.AE
4 Press t ( SET). The menu screen appears.
5 Press w e to select the desired sub menu.
6 Press 49. The sub menu appears.
[OFF] / SPORTS / SNOW / SPOTLIGHT / TWILIGHT
Various programmed effects can be added to the scene.
EFFECT
7 Press rt (or we) to select the desired menu item.
[OFF] / SEPIA / MONOTONE / CLASSIC FILM /
STROBE
Creative effects can be added to the image.
8 Press 49 again. Selection is complete.
● To return to the normal screen, press t ( SET).
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
32
For Advanced Operations
Cleaning the Camera
Read the advanced operation manual provided as HTML
Before cleaning, turn off the camera and remove the
format in the CD-ROM for more information. To access to battery pack and AC adapter.
the HTML files, follow the procedure below.
To clean the exterior
Wipe gently with a soft cloth. Put the cloth in diluted mild
soap and wring it well to wipe off heavy dirt. Then wipe
again with a dry cloth.
1 Load the provided CD-ROM onto your PC.
2 Right-click on the CD-ROM icon in the [My Computer]
window, then click [Open].
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the
monitor.
3 Double-click the [Docs] folder, then double-click the
[Manual] folder.
To clean the lens
Wipe gently with lens cleaning paper.
NOTES:
● Avoid using strong cleaning agents such as benzine or
alcohol.
● Cleaning should be done only after the battery pack has
been removed or other power units have been
disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth refer to the
cautions of each product.
4 Double click “start.html”.
5 Select the language by clicking the language button.
6 Now you can see menus on the left side and
instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
33
When the screen is under direct sunlight during
shooting, the screen becomes red or black for an
instant.
Troubleshooting
If the problem still exists after following the instructions
● This is not a malfunction.
During recording, the date/time does not appear.
● [DATE/TIME] is set to [OFF].
The camera is a microcomputer-controlled device.
External noise and interference (from a TV, a radio, etc.)
might prevent it from functioning properly. In such cases,
first disconnect its power supply unit (battery pack, AC
adapter, etc.) and wait a few minutes; and then re-
connect it and proceed as usual from the beginning.
The LCD monitor indications blink.
● Certain modes of wipe/fader, program AE, effect, DIS and
other functions that cannot be used together are selected at
the same time.
Digital zoom does not work.
● [ZOOM] is set to [10X] (optical zoom).
HSet [ZOOM] to [40X] or [200X]. (੬ pg. 28)
Power
No power is supplied.
● The power is not connected properly.
Playback
HConnect the AC Adapter securely. (੬ pg. 14)
● The battery pack is not attached firmly.
HDetach the battery pack once again and re-attach it firmly.
(੬ pg. 14)
Playback cannot be performed.
● Recording medium is not selected properly.
HSelect the recording medium. (੬ pg. 17)
● The rear panel is open.
● The battery is dead.
HClose the cover and set the power switch to OFF, then to
HReplace the dead battery with a fully charged one.
(੬ pg. 14)
.
● Playback starts, but there is no picture on TV.
HSet the TV's input mode or channel appropriate for video
playback.
Recording
Recording cannot be performed.
● [MEMORY CARD IS FULL] appears.
HReplace with new recording medium or delete unnecessary
files. (੬ pg. 16, 29)
● Recording medium is not selected properly.
HSelect the recording medium. (੬ pg. 17)
● The rear panel is open.
Advanced features
The focus does not adjust automatically.
● Focus is set to the manual mode.
HSet focus to the automatic mode. (੬ pg. 31)
● The lens is dirty or covered with condensation.
HClean the lens and check the focus again. (੬ pg. 32)
HClose the cover and set the power switch to OFF, then to
.
The color of the image looks strange.
When shooting a subject illuminated by bright light,
vertical lines appear.
● This is not a malfunction.
● The light source or the subject does not include white. Or
there are various different light sources behind the subject.
HTry manual white balance adjustment. (Refer to the
advanced operation manual in CD-ROM. ੬ pg. 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
34
The recorded image is too dark.
When the image is printed from the printer, a black
bar appears at the bottom of the screen.
● This is not a malfunction.
HBy recording with DIS activated, this can be avoided.
(੬ pg. 28)
● Shooting was performed under backlit conditions.
HTry backlight compensation. (Refer to the advanced
operation manual in CD-ROM. ੬ pg. 32)
The recorded image is too bright.
● The subject is too bright.
HSet [P. AE] to [SPOTLIGHT]. (੬ pg. 31)
Images on the LCD monitor appear dark or whitish.
● In places subject to low temperature, images become dark
due to the characteristics of the LCD monitor. This is not a
malfunction.
HAdjust the brightness and angle of the LCD monitor.
(੬ pg. 18, 27)
● When the LCD monitor's fluorescent light reaches the end
of its service life, images on the LCD monitor become dark.
HConsult your nearest JVC dealer.
White balance setting cannot be activated.
activated.
HTurn off the sepia (SEPIA) or monotone (MONOTONE)
mode before setting white balance. (੬ pg. 31)
The black & white fader does not work.
● The sepia (SEPIA) or monotone (MONOTONE) mode is
activated.
mode. (੬ pg. 31)
Colored bright spots appear all over the LCD monitor.
● The LCD monitor is made with high precision technology.
However, black spots or bright spots of light (red, green or
blue) may appear constantly on the LCD monitor. These
spots are not recorded on the picture. This is not due to any
defect of the unit. (Effective dots: more than 99.99 %)
The image looks like the shutter speed is too slow.
● When shooting in the dark, the unit becomes highly
HIf you want the lighting to look more natural, set [GAIN UP]
to [OFF]. (੬ pg. 28)
The SD card cannot be removed from the camera.
HPush in the SD card a few more times.
Picture does not appear on the LCD monitor.
● The LCD monitor's brightness setting is too dark.
HAdjust the brightness of the LCD monitor. (੬ pg. 27)
Other problems
The power/charge lamp on the camera does not light
during charging.
● Charging is difficult in places subject to extremely high/low
temperatures.
HTo protect the battery, it is recommended to charge it in
places with a temperature of 10°C to 35°C (50°F to 95°F).
(੬ pg. 37)
● The battery cover is open.
HClose the cover. (੬ pg. 14)
[SET DATE/TIME!] appears.
● The built-in clock's rechargeable lithium battery is
discharged.
● The previously set date/time is erased.
HConnect the camera to an AC outlet using the AC Adapter
for over 24 hours to charge the clock's lithium battery. Then
set the date/time. (੬ pg. 18)
Files cannot be deleted.
● Files are protected.
HRemove protection from the files and delete them.
(੬ pg. 29)
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
35
THIS CARD IS NOT FOR RECORDING VIDEO
Appears when a recording medium which is not capable
of video recording is inserted.
Warning Indications
The following indications appear on the screen.
UNSUPPORTED FILE!
Appears when playing back a file that is not compatible
with this camera's file format.
(Battery indicator)
Displays the battery remaining power.
Remaining power level
NO VIDEO FILES STORED!
Appears if there are no video files when you attempt video
playback.
High
Exhausted
● As the battery power comes close to nil, the battery
indicator blinks. When the battery power is exhausted,
power turns off automatically.
NO IMAGE FILES STORED!
Appears if there are no still image files when you attempt
still image playback.
SET DATE/TIME!
NO VOICE FILES STORED!
Appears if there are no voice files when you attempt voice
playback.
● Appears when the date/time is not set. (੬ pg. 18)
● Appears when the built-in clock (lithium) battery is
discharged and the previously set date/time is erased.
(੬ pg. 18)
THIS CARD IS NOT FOR CONTINUOUS SHOOTING
Appears when the recording medium is not capable of
continuous shooting.
LENS CAP
Appears for 5 seconds after power is turned on if the lens
cap is attached or when it is dark.
CLOSE COVER
Appears when the recording medium cover is opened
during file copy/move operation.
PLEASE INSERT MEMORY CARD
Appears when no recording medium is inserted in the
selected slot. (੬ pg. 16)
NO MEMORY CARD
Appears when recording media are not inserted to both of
slots for file copy/move operation.
THIS CARD IS NOT FORMATTED
Appears when an unformatted recording medium is
inserted.
NO SUPPORTED FILES
Appears when there is no JPEG (still image) files to be
copied or moved in recording media.
MEMORY CARD IS FULL
Appears when the recording medium is full and recording
is not possible.
CHECK CARD’S WRITE PROTECTION SWITCH
Appears when you attempt recording when the write
protection tab on the SD card is set to the "LOCK"
position.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
36
EN
NUMBER OF FOLDERS OVERFLOW
NO REGISTERED SCENES IN PLAY LIST
Appears when the number of folders exceeds the limit for SOME OF SCENES MAY NOT BE PLAYED BACK
file copy/move operation.
The video files registered in the play list do not exist.
Some of the scenes may not be played back.
MEMORY CARD ERROR!
REINSERT CARD OR CHANGE CARD
REGISTERED SCENES IN PLAY LIST IS EMPTY
Appears when the camera does not recognize the loaded THIS PLAY LIST WILL BE DELETED
recording medium. Remove the medium once and insert it There is no scenes registered in the play list. The play list
again or replace with another medium.
will be deleted.
FILE SYSTEM MAY HAVE PROBLEM
FORMAT IS RECOMMENDED AFTER COPYING
WANTED DATA
The file system of the recording medium may have a
problem. It is recommended to copy the data for backup,
then format the medium.
CAMERA TEMPERATURE IS GOING UP
TURN CAMERA OFF, PLEASE WAIT
The temperature of the camera is too high. Turn off the
power, then wait for a while.
CAMERA TEMPERATURE IS TOO LOW
KEEP CAMERA POWER ON, PLEASE WAIT
The temperature of the camera is too low. Keep the power
on, then wait for a while.
VIDEO MANAGEMENT FILE IS BROKEN
TO RECORD/PLAYBACK VIDEO, RECOVERY IS
REQUIRED
The video management file is broken. Recovery is
required to record or play back video files. Follow the
menu guide if you want to execute recovery.
RECORDING MAY NOT BE CORRECT ON THE
MEMORY CARD
The data may not be recorded on the recording medium
correctly. Try recording again.
NO VIDEO MANAGEMENT FILE
Otherwise, clean up the recording medium.
VIDEO FILES HAVE BEEN MOVED TO MPEG FOLDER
The data cannot be recorded properly, or the video
management file is deleted or not found. The extension of
the corresponding video file is changed from “.MOD” to
“.MPG”. Video files have been moved to MPEG
(EXTMOV) folder.
MEMORY CARD CANNOT BE PLAYED BACK
CORRECTLY
The recording medium cannot be played back correctly.
Try playback again.
CANNOT USE IN VIDEO MODE
The operation is not available in the video mode.
PLAY LIST’S MANAGEMENT INFORMATION IS
BROKEN
REMAKE PLAY LIST AGAIN
The management information of play list is broken. Create
the play list again.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
37
● To prevent damage and prolong service life
...do not subject to unnecessary shock.
Cautions
...charge in an environment where temperatures are within the
tolerances shown in the chart below. This is a chemical
reaction type battery — cooler temperatures impede
chemical reaction, while warmer temperatures can prevent
complete charging.
...store in a cool, dry place. Extended exposure to high
temperatures will increase natural discharge and shorten
service life.
AC Adapter
When using the AC adapter in areas other than the USA
The provided AC adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
... fully charge and then fully discharge the battery every 6
months when storing the battery pack over a long period time.
...remove from charger or powered unit when not in use, as
some machines use current even when switched off.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to an AC wall
outlet other than American National Standard C73 series
type use an AC plug adapter, called a “Siemens Plug”, as
shown.
NOTES:
● It is recommended that only genuine JVC batteries are used
in this camera. Using generic non-JVC batteries can cause
damage to the internal charging circuitry.
● It is normal for the battery pack to be warm after charging, or
after use.
For this AC plug adapter, consult your nearest JVC dealer.
Plug adapter
Temperature range specifications
Charging: 10°C to 35°C (50°F to 95°F)
Operation: 0°C to 40°C (32°F to 104°F)
Storage: –20°C to 50°C (–4°F to 122°F)
● The lower the temperature, the longer recharging takes.
● Charging times are for a fully discharged battery pack.
Battery Packs
The supplied battery pack is a
lithium-ion battery. Before
using the supplied battery
pack or an optional battery
pack, be sure to read the
following cautions:
Terminals
● To avoid hazards
...do not burn.
...do not short-circuit the
terminals. When transporting, make sure the provided
battery cap is attached to the battery. If the battery cap is
misplaced, carry the battery in a plastic bag.
...do not modify or disassemble.
...do not expose the battery to temperatures exceeding 60°C
(140°F), as this may cause the battery to overheat, explode
or catch fire.
...use only specified chargers.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
38
Recording Medium
Main Unit
● Be sure to follow the guidelines below to prevent
corruption or damage to your recorded data.
• Do not bend or drop the recording medium, or subject it to
strong pressure, jolts or vibrations.
● For safety, DO NOT
...open the camera’s chassis.
...disassemble or modify the unit.
...short-circuit the terminals of the battery pack. Keep it away
from metallic objects when not in use.
...allow inflammables, water or metallic objects to enter the unit.
...remove the battery pack or disconnect the power supply
while the power is on.
• Do not splash the disk with water.
• Do not use, replace, or store the disk in locations that are
exposed to strong static electricity or electrical noise.
• Do not turn off the camera power or remove the battery or
AC adapter during shooting, playback, or when otherwise
accessing the recording medium.
...leave the battery pack attached when the camera is not in
use.
• Do not bring the recording medium near objects that have a
strong magnetic field or that emit strong electromagnetic
waves.
• Do not store the recording medium in locations with high
temperature or high humidity.
• Do not touch the metal parts.
● Avoid using the unit
...in places subject to excessive humidity or dust.
...in places subject to soot or steam such as near a cooking
stove.
...in places subject to excessive shock or vibration.
...near a television set.
...near appliances generating strong magnetic or electric fields
(speakers, broadcasting antennas, etc.).
...in places subject to extremely high (over 40°C or 104°F) or
extremely low (under 0°C or 32°F) temperatures.
● DO NOT leave the unit
● Copy the recorded files to your PC. JVC shall not be
responsible for any lost data. (It is recommended
that you copy the data from your PC to DVD or other
media for storage.)
● A malfunction may cause the recording medium to
fail to operate properly. JVC shall not provide any
compensation for any lost contents.
...in places of over 50°C (122°F).
...in places where humidity is extremely low (below 35%) or
extremely high (above 80%).
...in direct sunlight.
LCD Monitor
● To prevent damage to the LCD monitor, DO NOT
...push it strongly or apply any shocks.
...in a closed car in summer.
...near a heater.
● To protect the unit, DO NOT
...allow it to become wet.
...place the camera with LCD monitor on the bottom.
...drop the unit or strike it against hard objects.
...subject it to shock or excessive vibration during
transportation.
...keep the lens directed at extremely bright objects for long
periods.
...expose the lens to direct sunlight.
...carry it by holding the LCD monitor.
...swing it excessively when using the hand strap or the grip.
...swing the soft camera case excessively when the camera is
inside it.
● To prolong service life
...avoid rubbing it with coarse cloth.
● Be aware of the following phenomena for LCD
monitor use. These are not malfunctions.
...While using the camera, the surface around the LCD monitor
and/or the back of the LCD monitor may heat up.
...If you leave power on for a long time, the surface around the
LCD monitor becomes hot.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
39
How to Handle a CD-ROM
Changes or modifications not approved by JVC could
void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV
technician for help.
● Take care not to soil or scratch the mirror surface (opposite
to the printed surface). Do not write anything or put a sticker
on either the front or back surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward from the center hole.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid
environment. Keep it away from direct sunlight.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
The camera is a microcomputer-controlled device.
External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such
cases, first disconnect its power supply unit (battery
pack, AC adapter, etc.) and wait a few minutes and then
re-connect it and proceed as usual from the beginning.
Declaration of Conformity
Model Number
Trade Name
: GZ-MC100U
: JVC
Responsible party : JVC AMERICAS CORP.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
Address
: 1700 Valley Road Wayne,
N. J. 07470
Telephone Number : 973-317–5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
40
For video/audio
Specifications
Format
SD-VIDEO
Recording/Playback format
Camera
Video: MPEG-2-PS
Audio: Dolby Digital AC-3 (2 ch)
Signal format
NTSC standard
Recording mode (video)
For general
Power supply
DC 11 V (Using AC adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 4.9 W
Approx. 7.7 W (Maximum; when charging a battery)
Dimensions (W x H x D)
41 mm x 103 mm x 71 mm (1-11/16" x 4-1/16" x 2-13/16")
Weight
Approx. 245 g (0.54 lbs)
(without battery, removable hard disk, lens cap and hand
strap)
Approx. 315 g (0.7 lbs)
ULTRA FINE: 720 x 480 pixels, 8.5 Mbps (CBR)
FINE:
NORMAL:
720 x 480 pixels, 5.5 Mbps (CBR)
720 x 480 pixels, 4.2 Mbps (VBR)
ECONOMY: 352 x 240 pixels, 1.5 Mbps (VBR)
Recording mode (audio)
ULTRA FINE: 48 kHz, 384 kbps
FINE:
NORMAL:
48 kHz, 384 kbps
48 kHz, 256 kbps
ECONOMY: 48 kHz, 128 kbps
(incl. battery, removable hard disk, lens cap and hand
strap)
For still image
Operating temperature
0°C to 40°C (32°F to 104°F)
Format
JPEG
Operating humidity
35% to 80%
Storage temperature
Image size
4 modes (1600 x 1200 / 1280 x 960 / 1024 x 768 /
640 x 480)
–20°C to 50°C (–4°F to 122°F)
Pickup
Picture quality
2 modes (FINE/STANDARD)
1/3.6" CCD
Lens
For voice
F 1.8 to 2.2, f = 4.5 mm to 45 mm, 10:1 power zoom lens
Filter diameter
ø30.5 mm
Format
Linear PCM
Recording mode
FINE:
STANDARD: 16 kHz, 512 kbps, 16 bit, stereo
ECONOMY: 8 kHz, 256 kbps, 16 bit, stereo
LCD monitor
48 kHz, 1,536 kbps, 16 bit, stereo
1.8" diagonally measured, LCD panel/TFT active matrix
system
Speaker
Monaural
Flash
Within 2 m (recommended shooting distance)
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
41
For connectors
AV
S-Video output:
Y: 1.0 V (p-p), 75 Ω, analog
C: 0.29 V (p-p), 75 Ω, analog
Video output: 1.0 V (p-p), 75 Ω, analog
Audio output: 300 mV (rms), 1 kΩ, analog, stereo
Headphone output
ø2.5 mm, stereo
USB
Mini USB-B type, USB 1.1/2.0 compliant
AC Adapter
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
DC 11 V
, 1 A
Design and specifications subject to change without
notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
42
: Approximate number of storable images (for still
image)
Recording Time and Number of Images
The tables below show the approximate recording time
and number of storable images.
● Removable hard disk
● The number increases or decreases depending on the
image size, picture quality and other conditions
(੬ pg. 28, 29, 30). The first column in the table
indicates the conditions.
● The provided 4 GB removable hard disk is indicated with
* mark.
Image size/quality
640 x 480/FINE
2 GB
9999
9999
6826
9999
4376
9999
2797
9142
4 GB*
9999
9999
9999
9999
8752
9999
5595
9999
640 x 480/STANDARD
1024 x 768/FINE
1024 x 768/STANDARD
1280 x 960/FINE
: Approximate recording time (for video)
(The numbers indicate “minutes”.)
1280 x 960/STANDARD
1600 x 1200/FINE
● Removable hard disk
1600 x 1200/STANDARD
Quality
ULTRA FINE
FINE
2 GB
30
4 GB*
60
● SD Card
45
90
NORMAL
ECONOMY
60
120
300
Image size/quality
640 x 480/FINE
32 MB 64 MB 256 MB 1 GB
150
205
375
95
425
755
200
375
125
250
65
2210
5200
855
7756
9999
3412
9999
2188
7110
1398
4570
640 x 480/STANDARD
1024 x 768/FINE
• The camera is not compatible with a removable hard disk of
1GB or less.
1024 x 768/STANDARD
1280 x 960/FINE
185
60
1715
550
● SD Card/CompactFlash Card
Quality
ULTRA FINE
FINE
128 MB
256 MB
512 MB
1 GB
16
1280 x 960/STANDARD
1600 x 1200/FINE
120
34
1100
285
2
3
4
6
8
12
15
43
24
1600 x 1200/STANDARD
50
110
480
NORMAL
ECONOMY
4
7
31
• Recommended SD cards are products of Panasonic, Toshiba
or SanDisk.
10
21
86
• The camera is compatible with the high-speed card only.
(SD card: 10 Mbps or faster, CompactFlash card: 40x or
faster)
• Recommended SD cards are products of Panasonic, Toshiba
or SanDisk.
• Recommended CompactFlash cards are products of Lexar,
SanDisk or Hagiwara Sys-Com.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCES
EN
43
● CompactFlash Card
: Approximate recording time (for voice)
Image size/quality
640 x 480/FINE
64 MB 128 MB 256 MB 1 GB
(The numbers indicate “minutes”.)
425
755
200
375
125
250
65
1115
2605
430
865
280
560
145
245
2235
5215
865
7756
9999
3412
9999
2188
7110
1398
4570
● Removable hard disk
640 x 480/STANDARD
1024 x 768/FINE
Quality
FINE
4 GB*
320
1024 x 768/STANDARD
1280 x 960/FINE
1735
560
STANDARD
ECONOMY
960
1960
1280 x 960/STANDARD
1600 x 1200/FINE
1120
290
1600 x 1200/STANDARD
110
490
• Recommended CompactFlash cards are products of Lexar,
SanDisk or Hagiwara Sys-Com.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in Japan
0904HOH-AL-VP
© 2004 Victor Company of Japan, Limited
US
Download from Www.Somanuals.com. All Manuals Search And Download.
|