DVD VIDEO RECORDER &
VIDEO CASSETTE RECORDER
SR-MV55U/
SR-MV45U
CABLE/DBS TV
TV
VCR
/DVD
/DVD
DVD
/
CBL/DBS
F1
F2
NUMBER / TV CH
1
4
2
3
ABC
DEF
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
0
CANCEL
F3
AUX
MEMO/MARK
FINALIZE
DISPLAY ON SCREEN
PROGRESSIVE
SCAN
TION
VIGA
M
E
NA
N
U
ENTER
SET
U
P
RETURN
NEXT
PREVIOUS
SLOW
PLAY/SELECT SLOW
CLEAR
STOP/
PAUSE
REMAIN
REC
OPERATE
REC MODE
ANGLE SUBTITLE
LIVE CHECK
INPUT
TV CH
TV
VOL.
/
TBC
EJECT
EJECT
VCR/DVD
STOP
REC MODE
VCR
FF
DVD
DUBB
REC
VCR
DVD
TV/VCR AUDIO
VCR
REC
TBC
DUBB
DVD
REC
TV
TV/CBL/DVD
TV
S-VIDEO
INPUT SELECT
–
VIDEO (MONO)L
-
AUDIO
-
R
+
REW
PLAY
PAUSE
DV IN
IN F-1
For Customer Use:
Enter below the Model No. and
Serial No. which are located on
the rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
EN
LPT1145-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
USE
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
1. Accessories
To avoid personal injury:
● Do not place this product on an unstable cart, stand, tripod, bracket,
or table. It may fall, causing serious injury to a child or adult, and
serious damage to the product.
Electrical energy can perform many useful functions. But improper
use can result in potential electrical shock or fire hazards. This
product has been engineered and manufactured to assure your
personal safety. In order not to defeat the built-in safeguards,
observe the following basic rules for its installation, use and
servicing.
● Use only with a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with the product.
● Use a mounting accessory recommended by the manufacturer and
follow the manufacturer’s instructions for any mounting of the product.
● Do not try to roll a cart with small casters across thresholds or deep-
pile carpets.
ATTENTION:
2. Product and Cart Combination
Follow and obey all warnings and instructions marked on your product
and its operating instructions. For your safety, please read all the safety
and operating instructions before you operate this product and keep
this booklet for future reference.
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
3. Water and Moisture
INSTALLATION
Do not use this product near water—for
example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and
the like.
1. Grounding or Polarization
(A)Your product may be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a
safety feature.
4. Object and Liquid Entry
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product.
(B)Your product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
5. Attachments
Do not use attachments not recommended by the manufacturer of
this product as they may cause hazards.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
2. Power Sources
Operate your product only from the type of power source indicated
on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. If your product is intended to operate from battery power,
or other sources, refer to the operating instructions.
7. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered.
● Do not block the openings by placing the product on a bed, sofa, rug
or other similar surface.
● Do not place the product in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
● All major sections and subsections are listed in the Table Of Contents
on page 6. Use this when searching for information on a specific
procedure or feature.
● The Index on pages 11 – 15 illustrates the controls and connections
on the front and rear panel, the front display panel and the remote
control.
● The list of terms on page 87 lists frequently-used terms, and the
number of the page on which they are used or explained in the
manual.
● The ੬ mark signals a reference to another page for instructions or
related information.
SERVICING
1. Servicing
If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
2. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product to its normal operation.
major section.
BEFORE YOU INSTALL YOUR NEW UNIT . . .
. . . please read the sections/literature listed below.
● “CAUTIONS” on page 2
● “IMPORTANT PRODUCT SAFETY INSTRUCTIONS” on pages 3 – 5
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance—
this indicates a need for service.
3. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or which have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
4. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in safe operating condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
Declaration of Conformity
Model Number:
Trade Name:
SR-MV55U/SR-MV45U
JVC
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc/cassette.
1. DO NOT place the unit —
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
— in an environment prone to extreme temperatures or
humidity.
— in direct sunlight.
— in a dusty environment.
— in an environment where strong magnetic fields are
generated.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
— on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you move it from
a cold place to a warm place, or under extremely humid
conditions—just as water droplets form on the surface of a glass
filled with cold liquid. In conditions where condensation may occur,
disconnect the unit’s power plug from the wall and keep it
disconnected for a few hours to let the moisture dry, then turn on
the unit.
● Manufactured under licence from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
● “DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
● Cassettes marked “S-VHS” and “VHS” can be used with this unit.
However, S-VHS recordings are possible only with cassettes marked
“S-VHS”.
ATTENTION:
8
Using a mobile phone in the vicinity of the unit may cause
picture vibration on the TV screen or change the screen to a
black back display.
By using the S- VHS ET function, it is possible to record and play
back with S-VHS picture quality on VHS cassettes with this unit.
● This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for home
and other limited viewing users only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
8
Some TVs or other appliances generate strong magnetic
fields. Do not place such appliances on top of the unit as it
may cause picture disturbance.
If there is a power outage when using the unit, the recorded
data may be erased.
8
8
Recorded programs and data cannot be restored once the
disc or tape is damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
6
EN
About Discs....................................................................................7
Manual Dubbing (From DVD To VCR) ........................................ 49
Edit From A Camcorder............................................................... 52
INDEX
Basic Connection .........................................................................16
INITIAL SETTINGS
REMOTE CONTROL
55
OPERATIONS ON DVD DECK
Using The On-screen Bar ............................................................28
Format A Disc (DVD Deck Only) ................................................. 62
Scan Mode Set............................................................................ 65
OPERATIONS ON VCR DECK
Playback Features .......................................................................34
RECORDING
GLOSSARY
73
Library Database DVD Navi.........................................................39
Edit Original Information...............................................................40
Edit Play List Information .............................................................42
Edit Library Information................................................................44
Playback With MP3/JPEG Navigation..........................................45
APPENDIX
RS-232C INTERFACE (SR-MV55U ONLY)
RS-232C Interface – Specifications –.......................................... 73
RS-232C Interface – Command – ............................................... 74
SPECIFICATIONS
LIST OF TERMS
86
87
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
7
After finalizing —
After a DVD-R/RW disc (Video mode) has been finalized, it is
possible to play back the recorded programs (video and/or audio)
on a standard DVD video player as a DVD VIDEO disc.
● Edited titles are displayed as the
“DVD menu” in video mode.
● It is impossible to record, edit or
delete the data either in video
About Discs
Recordable/playable Discs
You can use discs with the following logos for recording and
playback.
mode or in VR mode.
● Either in video mode or in VR
mode, although the disc can be
played back on DVD players from
other manufacturers, sometimes it
may not be possible to play back
DVD-RAM
DVD-RW
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Ver. 2.0
Ver. 2.1, Ver. 2.1/3x
Ver. 2.2/5x
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Ver. 1.0 (VR mode)
Ver. 1.1, Ver. 1.1/2x
(Video mode/VR mode)
Ver. 1.2/4x
depending on the disc and recording conditions.
● It is impossible to record on CD-R/RW or DVD-R discs used for
authoring.
● It is impossible to record onto DVD-R/RW (Video mode) discs
broadcasts that allow you to copy once. The copy once programs can
only be recorded onto DVD-RW discs formatted in VR mode.
(Video mode/VR mode)
NOTE:
The following may result if you play back a DVD-R disc recorded on
another unit.
● The disc does not play.
● A mosaic pattern (block noise) appears on the screen.
● Video or audio may be dropped out.
● The unit stops during playback.
DVD-R
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
General Ver. 2.0 (Video mode)
General Ver. 2.0/4x/8x/16x
(Video mode)
Discs For Playback Only
You can use discs with the following logos for playback only.
DVD VIDEO
Video CD/Super Video CD
● The above table is based on the information as of December 2006.
● Recording and playback may not be performed depending on the
characteristics and condition of the disc used, leading to
unsatisfactory results. Using discs manufactured by JVC is
recommended since they have been tested to be compatible with this
unit.
(example of region code
indications)
DVD-RAM Discs
It is only possible to use discs which conform with DVD-RAM
standard Version 2.0 or 2.1.
● It is impossible to record on DVD-RAM discs which do not conform to
this standard. If you use a disc formatted under a different standard
version, format it on this unit before use.
● It may not be possible to record, play back, edit or dub a DVD-RAM
disc even if it conforms to the standard if it was recorded or edited on
the devices from other manufacturers or on a PC, or if it has far too
many titles, or if there is very little available capacity remaining on the
disc.
● Some DVD-RAM discs are contained in a cartridge. This unit cannot
handle this type of disc. Remove the disc from the cartridge (only
discs with a removable cartridge); or the use of DVD-RAM discs not
contained in a cartridge is recommended.
● DVD-RAM discs recorded on this unit cannot be played back on an
incompatible DVD player.
Audio CD
CD-R
CD-DA/JPEG/
MP3 files
CD-DA files
CD-RW
CD-DA/JPEG/
MP3 files
CD-ROM
JPEG/MP3 files
● Playback may not be performed depending on the characteristics and
condition of the disc used.
● DTS Audio CDs can also be played back (An optional DTS decoder is
required).
● MP3 and JPEG discs can be played back on this unit only when they
have been recorded in the ISO9660 or Joliet format and finalized.
● JPEG files that can be played back on this unit must conform to JFIF/
Baseline process, and the maximum resolution of a JPEG file is
2,812 pixels in width and 2,112 pixels in height.
● CD-R/RW discs recorded in music CD format need to be finalized to
play back on this unit.
● Operation and audio quality of this unit are not guaranteed for discs
that do not conform to the Compact Disc specification (CD-DA).
Before you play back a CD, check for the CD logo and read the notes
on the package to confirm that it conforms to the Compact Disc
specification.
onto 4.7/9.4 GB DVD-RAM discs (2.8 GB DVD-RAM discs are not
compatible).
DVD-R/RW Discs
It is only possible to use DVD-R discs which conform with DVD-R
standard Version 2.0.
When a DVD-R/RW disc (Video mode) is finalized (੬ pg. 63), it
can be played back on a standard DVD player as a DVD VIDEO
disc.
When a DVD-RW disc (VR mode) is finalized (੬ pg. 63), it can be
played back on a standard DVD player compatible with the VR
mode of DVD-RW discs.
● Depending on the intentions of the author of the software, recording
conditions of DVD discs and Video CD discs may be restricted. Since
this unit plays back discs according to the intentions of the author of
the software as indicated on the disc, some functions may not
operate as commanded.
● When switching from the first layer to the second layer of double-
layered DVD VIDEO discs, the image and sound may be momentarily
distorted. This is not a malfunction.
Before finalizing —
— it is possible to record on unrecorded areas of the disc, edit the
disc title and program titles, and delete programs.
● It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalized.
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
8
EN
● DVD-AUDIO discs compatible with DVD video players can be played.
● Super Audio CDs (SACD) compatible with conventional CD players
can be played.
● Super Video CDs (SVCD) can be played. However, depending on the
discs, some may not be playable.
Recording Medium And Format
DVD-RAM
● Recording and erasing can be performed as many times as possible
on a disc.
● Editing can be performed after recording, such as deleting unwanted
parts.
● While recording, it is possible not only to start playback of a program
currently being recorded, but also to watch another program
previously recorded.
Unplayable Discs
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
DVD-RW (VR mode)
● Recording and erasing can be performed as many times as possible
on a disc.
● Editing can be performed after recording, such as deleting unwanted
parts.
● CD-ROM discs (including PHOTO-CD and CD-G)
● Discs recorded in Packet Write (UDF) format.
● 1.3-GB double density CDs (DDCD)
DVD-RW (Video mode)
● Can be played back on other DVD players.
● New recording can be performed by erasing all the data on a disc
once played back.
● High density CDs (HDCD)
The following discs also cannot be played back.
● Discs of a region number other than “1”
● DVD-RAM (2.6 GB/5.2 GB)
DVD-R
● Can be played back on other DVD players.
● Suitable when keeping a recorded disc for a long time.
● DVD-RAM (TYPE1)
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may not be recommended.
File Structure Of Discs
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
“titles”. Each title has a number (title number) that can be used to
select desired titles. Titles are further divided into units called
“chapters”. Each chapter has a number (chapter number) that can
also be used to select desired chapters. Note that some discs are
not divided into titles and chapters.
Region Number
The world is divided into 6 regions for DVD VIDEO discs.
DVD VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played back
on this unit unless the region number of the disc matches that of
the unit. The region number for this unit is “1”. Only discs whose
region number includes “1” or “ALL” can be played back such as
shown below.
When you record a program on a DVD-RAM/RW (VR mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes from monaural to stereo
due to commercial breaks, etc. It is also possible to insert chapter
marks at desired locations during playback. (੬ pg. 22)
Examples of DVD VIDEO labels which can be played back
using this unit.
When you record a program on a DVD-R/RW (Video mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes due to commercial breaks,
etc. It is also possible to insert chapter marks at desired locations
during either recording or playback. Once the disc has been
finalized, these chapter marks are deleted and new chapter marks
are assigned automatically approximately every 5 minutes.
Marks of discs in this instruction manual
Allows operation with a
DVD-RAM disc.
Allows operation with a
Video CD disc.
Allows operation with a
DVD-R disc.
Allows operation with
an Audio CD disc.
DVD-RAM, DVD-RW, DVD-R or DVD VIDEO disc
Title 1
Title 2
Allows operation with a
DVD-RW disc.
Allows operation with a
disc including MP3
files.
Chapter 1 Chapter 2 Chapter 3
Chapter 1 Chapter 2 Chapter 3
● In Video mode, even before finalizing, it is impossible to perform
editing operations other than changing the disc name and/or title
names and deleting programs and/or titles.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
disc including JPEG
files.
● After finalizing, it is impossible to perform editing operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
9
Audio CD/Video CD
DVD VIDEO Marks
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video CD
discs.
However, some discs are not divided into tracks.
Audio CD or Video CD
Marks related to video
Track 1
Track 2
Track 3
Track 4
Number of subtitles
Number of angles
JPEG/MP3 Disc (CD-R/RW/ROM)
MP3/JPEG files put in directories nested in several levels on a disc
will be organized as if they were put in single level directories
(groups) by the MP3/JPEG Navigation of this unit. (੬ pg. 45)
Recorded under the
standard 4:3 aspect
ratio
Screen includes black
bands at the top and
the bottom of image
which has a standard
4:3 aspect ratio (letter
box)
File structure of a disc before starting the MP3/JPEG
Navigation
Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.
Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).
Directory
MP3 file
JPEG file
Marks related to audio
File structure of the disc after starting the MP3/JPEG
Navigation
Number of audio tracks
Files are automatically grouped as follows and displayed on the
MP3/JPEG Navigation screen. Data is displayed in the
alphabetical order of file name. Files are grouped based on roots.
Dolby Digital Recording mark
Developed by Dolby Laboratories. It enables
high-quality stereo audio recording.
DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL AUDIO OUT connector of the unit.
● This unit can recognize up to 9 hierarchies including directories and
files.
Also, it can recognize up to 250 files in each group, and up to 99
groups on a disc.
NOTES:
● Video CD discs that support Playback Control (PBC)
The contents of a disc are recorded into several hierarchies, and played
back according to the instructions on the screen while navigating through
the hierarchies. It is also possible to playback recorded tracks
consecutively without activating the PBC function even when playing a
PBC-compatible disc. (੬ pg. 24)
● Regarding the contents recorded on discs
Some files may not be played back depending on the file types and other
factors.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
10
Placing A Disc
Care And Handling Of Discs
Opening the disc tray
Press x (EJECT) to open the disc tray.
How to handle discs
When handling a disc, do not
touch the surface of the disc.
Since discs are made of
x
plastic, they are easily
damaged. If a disc gets dirty,
dusty, scratched or warped, the
images and sound will not be
picked up correctly, and such a
disc may cause the unit to malfunction.
● Pressing the button again closes the disc tray.
● Use the button to open and close the disc tray.
● Do not block the disc tray with your hand while it is opening or closing
as this may result in hardware failure.
Label side
Do not damage the label side, stick paper to or use any adhesives
on its surface.
● Do not place unplayable discs or any object other than a disc on the
disc tray.
● Do not press down strongly on the disc tray or place any heavy
objects on it.
Recording side
Make sure that discs are not scratched and dirty on the recording
side before use. Scratches and dirt on the recording side of a disc
may hinder proper playback and recording. Also be careful that a
DVD-RAM disc may get scratched or dirt when removed from
cartridge then put back in after use.
Discs without cartridges
Place the disc on the disc tray with the
label side facing up. Since disc size
changes depending on the disc to be
played back, be sure to correctly align
the disc with the grooves for its size. If
the disc is not in its groove, it may be
scratched or otherwise damaged. To
insert an 8 cm disc, place it according
to the inner groove.
Storage
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Maintenance of discs
DVD-RAM discs contained in
cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with “Side A” facing down, programs are recorded on the side A.
If there are fingerprints or other dirt adhering
to a disc, wipe with a soft dry cloth, moving
from the centre outwards.
If a disc is difficult to clean, wipe with a cloth
moistened with water. Never use record
cleaners, petrol, alcohol or any anti-static
agents.
Single-sided discs:
CAUTION:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
Sometimes during playback, noise may appear or images may
be garbled. This is sometimes due to the disc. (It may not be up
to industry standards.)
These symptoms are caused by the discs, not by the malfunction
of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
11
Front View
E
C
J
A B
D
F
G H I
K
OPERATE
TBC
EJECT
EJECT
VCR/DVD
STOP
REC MODE
VCR
FF
DVD
DUBB.
REC
VCR
DVD
VCR
REC
TBC
DUBB.
DVD
REC
S-VIDEO
INPUT SELECT
VIDEO (MONO)L
-
AUDIO
-
R
REW
PLAY
PAUSE
–
+
DV IN
IN F-1
L
N
O
P
STU W X
V
R
Q
M
A Operate Button (OPERATE 1)
C Cassette Loading Slot
Q Infrared Beam Receiving Window
R Stop Button (8) ੬ pg. 20, 33
D VCR Lamp ੬ pg. 33
VCR Recording Lamp (REC) ੬ pg. 36
E TBC Lamp ੬ pg. 35
Dubbing Lamp (DUBB.) ੬ pg. 46
F DVD Lamp (DVD) ੬ pg. 17, 20
DVD Recording Lamp (REC) ੬ pg. 36
H VCR/DVD Button
T Play Button (4) ੬ pg. 20, 33
Fast Forward Button (5) (VCR deck) ੬ pg. 33
Forward Slow Button (SLOW +) ੬ pg. 22
I Recording Mode Button (REC MODE) ੬ pg. 36
J Disc Tray
W Record Button (7) ੬ pg. 36
Dubbing Direction Button (VCR]DVD/VCR}DVD)
੬ pg. 46, 48
X DV Input connector [DV IN (i*)] (DVD deck only)
੬ pg. 51
*
i (i.Link) refers to the IEEE1394-1995 industry specification and
extensions thereof. The i logo is used for products compliant with the
i.Link standard.
L TBC Button ੬ pg. 35
M S-video Input Connectors (S-VIDEO IN F-1) ੬ pg. 52
N Video/Audio Input Connectors (VIDEO/AUDIO (L/R) IN
F-1) ੬ pg. 52
When using a monaural audio cable, use [AUDIO L
(MONO)] input connector. In this case, the sound on the
left channel is also recorded on the right channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
12
Rear View
A B
C
D
E FG H I
DVD/VCR OUTPUT
VIDEO
DVD
DVD/VCR
DVD
DIGITAL
AUDIO OUT VIDEO OUT
OUTPUT INPUT L-1
COMPONENT
PCM/
STREAM
OPTICAL
Y
VIDEO
VIDEO
COAXIAL
SERIAL
L
AUDIO
R
L
AUDIO
R
PB
PR
COM.
L
AUDIO
REMOTE IN
R
J K L M N
A Region Number Label ੬ pg. 8
B AC Power Cord ੬ pg. 16
C Cooling Fan
G S-video Input Connector ੬ pg. 53
੬ pg. 16
J Video/Audio Output Connectors [VIDEO/AUDIO
OUTPUT] (DVD deck only) ੬ pg. 16
K Video/Audio Input Connectors (VIDEO/AUDIO INPUT
● This prevents the temperature from rising inside the unit.
Do not remove it.
● Install the unit so as not to block the area around the fan.
when “POWER SAVE” is set to “OFF” (੬ pg. 59).
D Digital Audio Output Connectors
only) ੬ pg. 54, 57
E Component Video Output Connectors [COMPONENT
L Serial Command Connector (D-SUB 9-PIN) [SERIAL
COM.] ੬ pg. 73 (SR-MV55U)
● Use this connector when controlling this unit via a computer. The
cable to be used should be a RS-232C interface cable (straight
type). For details on the RS-232C interface command, refer to
page 73.
VIDEO OUT (Y/P /P )] ੬ pg. 16
B
R
● This component video output enables you to watch the images on
the VCR deck in Progressive scan mode, refer to “VHS
Progressive Scan” (੬ pg. 35).
M Audio Output Connectors [AUDIO OUTPUT] ੬ pg. 16
N Remote In Connector* (REMOTE IN)
F S-video Output Connector (DVD deck only) ੬ pg. 16
* There is currently no compatible remote control unit available.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
13
Front Display Panel
A
B C D
E
F G
H
I
J
LPCM
FR
XP SP LP EP
VR
-RW VCD
-RAM
S-VHS
DVD
M
N
K
O
P
Q
A Disc Type Indicator
I Random/Program Playback Mode Indicator (RND/
PRGM) ੬ pg. 31
When a disc is loaded, the type of the disc is indicated.
“RND”:
Lights when Random Playback mode is set.
When a disc is running, the disc marks rotate.
“PRGM”: Lights when Program Playback mode is set.
J Repeat Mode Indicator ( /1/A–B) ੬ pg. 29, 35
Select Repeat Playback mode on the on-screen bar.
VR Mode Indicator ੬ pg. 62
Lights when a DVD-RW disc is formatted in VR mode.
B Linear PCM Indicator (LPCM)
“
”:
Whole disc is played back repeatedly.
VCR deck.
Lights when “XP MODE REC AUDIO” is set to “LINEAR PCM”
(੬ pg. 59) for recording with DVD-RAM, DVD-R and DVD-RW
discs, and when Linear PCM audio is played.
“
“
1”:
A–B”: The selected part (A–B) is played back repeatedly.
C Cassette Loaded Mark (
)
No display: Repeat Playback mode is off.
K S-VHS Indicator
Indicates the present of a cassette in the VCR deck. Lights when a
cassette is loaded into the VCR deck.
Lights up when a cassette marked “S-VHS” is inserted with “S-VHS
MODE” set to “ON” (੬ pg. 61), the cassette recorded in S-VHS or
S-VHS ET mode is played back, or when “S-VHS ET” is set to “ON”.
(੬ pg. 60)
D Recording Mode Indicator (XP/SP/LP/EP/FR) ੬ pg. 37
Blinks when recording mode is being set.
While “FR” is blinking, the left 3 digits of the Multi Display (M N)
indicate setting values ranging from “60” to “480”. After the value
has been set, only “FR” lights.
L Video Output Indicator ( ) ੬ pg. 65
No display: Indicates that interlace mode is engaged.
E Group/Title Indicator (GRP/TITLE)
:
Indicates that progressive mode is engaged.
lights when video output mode is in progressive
(Example)
mode.
“GRP” or “TITLE” lights depending on a disc loaded while the left 2
digits of the Multi Display (M) indicate the numbers explained below.
“GRP”:
Total number of groups or group number being played
back are displayed on the Multi Display.
M Group/Title Number Display
N Track/Chapter Number Display
Lights when remaining time of DVD-RAM, DVD-R and DVD-RW
discs is displayed, and lights out when elapsed time is displayed.
The right 6 digits of the Multi Display (P) indicate elapsed or
remaining time of each track.
No display: Indicates elapsed time of the disc.
Displayed: Indicates remaining time of the disc.
P Remaining Time/Elapsed Time Display ੬ pg. 23, 37
“TITLE”: Total number of titles or title number being played back
are displayed on the Multi Display.
F Input Indicator
Indicates the input selected.
G Track/Chapter Indicator (TRK/CHAP)
“TRK” or “CHAP” lights depending on a disc loaded while the 3rd
and 4th digits from the left of the Multi Display (N) indicate the
numbers explained below.
“TRK”:
Total number of tracks or track number being played
back are displayed on the Multi Display.
Q Multi Display
Displays clock, elapsed time and remaining time.
Also displays status of the unit (NO DISC/OPEN/CLOSE/
READING).
“CHAP”: Chapter number being played back are displayed on the
Multi Display.
H Simulated Surround Effect Indicator (3D) ੬ pg. 30
Lights when a simulated surround effect is set to “3D-ON” on the
on-screen bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
14
On-Screen Display (DVD deck)
When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the
TV screen. To clear the operational indicators, press ON SCREEN twice.
L
R
L-1
A Disc Display
H Clock Display
I Bar Meter Display ੬ pg. 26
Displays the type of the disc loaded on the disc tray.
B Title Number*
Displays playback point and other information in bar meter.
J Title Name Display
Displays number of the title currently being played back.
C Playback Operation Status Indicator*
Indicates playback operation status by pictographs.
D Playback Time*
Displays playback time of the title currently being played back.
E Recording Mode
Displays title name newly registered to the title recorded on DVD-
RAM/RW/R discs, or file name of JPEG and MP3 files.
K Operation Status Indicator
Indicates operation status by pictographs. (Also indicates its speed
for forward high-speed search, reverse high-speed search and slow
motion.)
Displays recording mode as XP, SP, LP, EP, FR60–FR360, FR420
and FR480. Current recording mode is displayed during recording,
and recording mode in which the program was recorded is displayed
during playback. The recording mode is not displayed during play
list playback.
L Time Display
Displays single title playback elapsed time, single track playback
elapsed time, single track remaining time, total elapsed time, total
remaining time, and other information in turn.
M Audio Mode Display
F Title Number
Displays playback title number during playback, and recording title
number during recording.
Displays audio that is being input.
N Auxiliary Input Indicator (L-1 or F-1)
Displays currently selected input.
G Chapter Number
Displays playback chapter number during playback, and recording
chapter number during recording.
* During Live Memory playback, playback operation status is displayed.
During normal playback, the multichannel encoding method is displayed.
On-Screen Display (VCR deck)
When “SUPERIMPOSE” is set to “ON” or “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear
on the TV screen. To clear the operational indicators, press ON SCREEN again.
A Operation Mode Indicators
J
C Tape Position Indicator
I
H
The tape position indicator
A
B
appears on the TV screen when
you press 3 or 5 from the
Stop mode or perform an Index
Search. (੬ pg. 34) The position
of “q” in relation to “B”
(Beginning) or “E” (End) shows
you where you are on the tape.
C
D
E
F
G
NOTE:
Beginning
End
Depending on the type of tape
being used, the tape position
indicator may not appear
correctly.
D Index number ੬ pg. 34
E Tape Remaining Time Indicator ੬ pg. 38
F Counter Display
G Audio Mode Display ੬ pg. 35
H Day/Clock Display
I Auxiliary Input Indicator (L-1 or F-1)
J “Cassette Loaded” Mark
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Rewind Button (3) (VCR deck) ੬ pg. 33
Reverse Slow Button (SLOW –) ੬ pg. 22
N Stop Button (8) ੬ pg. 20, 33
Remote Control
CABLE/DBS TV
VCR
DVD
TV
/
CBL/DBS
/DVD
/DVD
F1
F2
NUMBER / TV CH
Live Check Button (LIVE CHECK) ੬ pg. 25, 27
S TV/VCR Button ੬ pg. 55
1
4
2
3
ABC
DEF
5
6
GHI
JKL
MNO
7
8
9
T Audio Button (AUDIO) ੬ pg. 23, 35
PQRS
TUV
WXYZ
0
TV Muting Button ( ) ੬ pg. 55
U TV/CABLE/DBS/DVD switch ੬ pg. 17, 55, 56
CANCEL
F3
AUX
MEMO/MARK
FINALIZE
DISPLAY ON SCREEN
PROGRESSIVE
SCAN
Progressive Scan Button (PROGRESSIVE SCAN)
੬ pg. 65
ENTER
PREVIOUS
NEXT
Z Display Button (DISPLAY) ੬ pg. 23, 37
b w e Button ੬ pg. 17
SLOW
PLAY/SELECT SLOW
c Enter Button (ENTER) ੬ pg. 17
CLEAR
STOP/
PAUSE
d Return Button (RETURN) ੬ pg. 24
Fast Forward Button (5) (VCR deck) ੬ pg. 33
g Pause Button (9) ੬ pg. 20, 34
REMAIN
REC
REC MODE
ANGLE SUBTITLE
LIVE CHECK
INPUT
TV CH
TV
VOL.
/
TV/VCR AUDIO
TV
TV/CBL/DVD
TV
h Skip Search Button (
i Instant Replay Button (
) ੬ pg. 22, 27
) ੬ pg. 27, 34
j TV Volume Button (TV VOL.) ੬ pg. 55
k TV/CBL DVD Channel Button (INPUT/TV CH +/–)
੬ pg. 36, 55
How To Use
The glow-in-the-dark buttons shown in grey on the illustration
above are helpful when using the remote control in darkened
rooms.
Before use, insert two AA size batteries into the remote control
with the polarity ( and ) matched correctly as indicated on
the battery compartment or on the lid.
The remote control can operate most of your unit’s functions, as
well as basic functions of TV sets of JVC and other brands.
(੬ pg. 55)
Buttons with a small dot on the left side of the name can also be
used to operate your TV. (੬ pg. 55)
● Point the remote control toward the receiving window.
● The maximum operating distance of the remote control is about
8 m.
A F2 Button: Not use on this unit.
B F1 Button ੬ pg. 65
C Number Keys ੬ pg. 24
NOTE:
D Auxiliary Button (AUX) ੬ pg. 53
G F3 Button: Not use on this unit.
H Top Menu Button (TOP MENU) (DVD deck only)
੬ pg. 21
If the remote control doesn’t work properly, remove its batteries, wait
a short time, replace the batteries and then try again.
Navigation Button (NAVIGATION) (DVD deck only)
੬ pg. 39
I rt Button ੬ pg. 17
J Set Up Button (SET UP) ੬ pg. 17
K Reverse Skip Button (2) (DVD deck) ੬ pg. 21, 27
Index Button (2) (VCR deck) ੬ pg. 34
Previous Button (PREVIOUS) (DVD deck only) ੬ pg. 24
L Play Button (4) ੬ pg. 20, 33
Select Button (SELECT) (DVD deck only) ੬ pg. 20, 40
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR NEW UNIT
EN
16
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
OPERATION CAN BE PERFORMED.
Basic Connection
Connecting to a TV Monitor
Camcorder
Connect the unit to a TV depending on the TV and cables you use.
8 AV Connection
Another Recorder
To connect to a TV with BNC connector —
A Connect an optional audio cable between the [AUDIO
OUTPUT] connectors on the rear panel of the unit and the TV’s
audio input connectors.
B Connect an optional BNC video cable between the unit’s BNC
[VIDEO OUTPUT] connector and the TV’s BNC VIDEO input
connector.
8 S-Video Connection
To connect to TV’s S-VIDEO input and AUDIO input
connectors —
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
To S-VIDEO
input
To [AUDIO/VIDEO
INPUT]
A Connect the unit’s S-VIDEO output connector to the TV’s
S-VIDEO input connector.
AC outlet
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AUDIO input connectors.
● You can obtain high-quality S-VHS pictures.
● If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT]
connectors to connect to an audio amplifier for Hi-Fi stereo sound
reproduction.
To [S-VIDEO
IN F-1]
AC power cord
8 Component Video Connection (DVD deck only)
To connect to TV’s component video input connectors —
A Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]
connectors to the TV’s component video input connectors.
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
● You can obtain high-quality component video pictures.
reproduction.
Back of unit
To
To
[VIDEO
OUTPUT] OUTPUT]
To
[AUDIO
To
S-VIDEO
output
[COMPONENT
VIDEO OUT
(Y/P /P )]
B
R
Component video
cable
BNC video Audio cable
cable
(not supplied)
S-videocable
(supplied)
(supplied)
(not supplied)
● By using the component video connection, you can view the images
in the progressive mode. For switching to the progressive mode, refer
to “Scan Mode Set” (੬ pg. 65).
● You can also watch the images on the VCR deck in Progressive scan
mode via the component video output, refer to “VHS Progressive
Scan” (੬ pg. 35).
TV
Connecting to a Camcorder
8 AV Connection
A Connect the unit’s [VIDEO/AUDIO (L/R) IN F-1] connectors on
the front panel to the camcorder’s AV connector.
● Set “FRONT AUX F-1” to “VIDEO”. (੬ pg. 59)
8 S-Video Connection
It’s essential that your unit be properly connected.
ATTENTION:
Connect the AC plug only after all connections to the TV has been
completed.
B Connect the unit’s [AUDIO IN F-1] connectors on the front panel
to the camcorder’s AV connector.
● Make sure the package contains all of the accessories listed in
“SPECIFICATIONS” on page 86.
● Place the unit on a stable, horizontal surface.
● Set “FRONT AUX F-1” to “S-VIDEO”. (੬ pg. 59)
To connect to a DV camcorder, refer to “DV Dubbing (DVD Deck
Only)” (੬ pg. 51).
Connecting to Another Recorder
A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT]
connector to another recorder’s s-video or video output connector.
B Connect the unit’s [AUDIO INPUT] connectors to another
recorder’s audio output connectors.
Plug the end of the AC power cord into an AC outlet.
● “LOADING” blinks on the front display panel when the AC
plug of the AC power cord is connected into an AC outlet.
It takes approximately 50 seconds for the unit to be turned
on. This is not a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
17
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
Clock Set
2 Press SET UP to access the Main Menu screen.
3 Press w e to select “INITIAL
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
SET UP”, then press ENTER.
4 Press rt to select “TIME”,
then press ENTER. Press rt
until the desired time appears,
then press ENTER to start clock.
● Set the date and year in the same
way.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
● Holding rt changes the time in
30-minute intervals, or changes the date in 15-day intervals.
5 Press rt to select “D.S.T.”, then press ENTER. Press rt to
select the desired setting, then press ENTER.
ON: Adjustment will be made by the built-in clock itself.
OFF: Select when Daylight Saving Time does not apply to you.
rtw e
ENTER
SET UP
6 Press SET UP to complete the setting.
Daylight Saving Time
This function enables automatic adjustment of the unit’s clock at
the start and end of Daylight Saving Time.
With D.S.T activated, —
— on the second Sunday of March at 2:00 AM, the clock is
adjusted to 3:00 AM.
— on the first Sunday of November at 2:00 AM, the clock is
adjusted to 1:00 AM.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
18
On-screen Language Set
This unit offers you the choice to view on-screen messages in 3
different languages.
Language
● Turn on the unit.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press w e to select “FUNCTION SET UP”, then press ENTER.
VCR/DVD
4 Press w e to select “DISPLAY
1
4
7
2
5
8
0
3
6
9
SET”, then press ENTER.
5 Press rt to select “ON
SCREEN LANGUAGE”, then
press ENTER.
6 Press rt to select your
desired language, then press
ENTER.
rtw e
ENTER
SET UP
7 Press SET UP to complete the setting.
Menu/Audio/Subtitle Language Set (DVD deck only)
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
● The procedure shows how to set “MENU LANGUAGE” as an
example.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press w e to select “DVD SET UP”, then press ENTER.
4 Press w e to select
“LANGUAGE SET”, then press
ENTER.
LANGUAGE”, then press ENTER.
6 Press rt to select your
desired language, then press
ENTER.
● See “Language Code List”
(੬ pg. 70).
7 Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc’s
default menu language is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
19
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
Monitor Set (DVD Deck Only)
2 Press SET UP to access the Main Menu screen.
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
3 Press w e to select “FUNCTION SET UP”, then press ENTER.
4 Press w e to select “VIDEO IN/
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
OUT”, then press ENTER.
5 Press rt to select “MONITOR
TYPE”, then press ENTER.
6 Press rt to select the desired
option, then press ENTER.
VCR/DVD
7 Press SET UP to complete the
1
4
7
2
5
8
0
3
6
9
setting.
* The boldface settings below indicate the settings at your
purchase.
rtw e
ENTER
SET UP
8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
4:3LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9 (wide
TV). The unit automatically adjusts the screen width of the output
signal correctly when playing back a picture whose aspect ratio is
4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image, “Pan&Scan” (PS) and
“Letter Box” (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
● The picture will be shown in the “4:3LB” mode
depending on the disc even if the “4:3PS” mode
is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
20
To play back an MP3/JPEG disc, see “Playback With MP3/JPEG
Navigation” (੬ pg. 45).
Basic Playback
1 Load a disc.
● For details, refer to “Placing A Disc” (੬ pg. 10).
● Playback begins automatically if an auto-playback DVD disc is
loaded.
● Pressing 4 also closes the disc tray, and playback begins
automatically.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
2 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3 Press 4 to start playback.
x
VCR/DVD
● If you load a DVD disc whose region code does not match the unit,
“REGION CODE ERROR CHECK DISC” appears on the TV screen.
appears on the TV screen, refer to “Parental Lock” (੬ pg. 32).
display may appear on the TV screen after starting playback. In this
case, select an item which you want to play back from the menu.
Otherwise, the playback cannot go forward. Refer to “Playback
Control (PBC) Function” (੬ pg. 24) or “Locating A Desired Scene
Using The DVD Menu” (੬ pg. 21).
DVD Lamp
8 4 9
● The Library Database DVD Navi also enables you to search and
select the desired programs. (੬ pg. 40)
VCR/DVD
1
4
7
2
5
8
0
3
6
9
4 Press 9 to pause playback.
● To resume normal playback, press 4.
5 Press 8 to stop playback.
● When a recordable disc is played, playback stops and AV input (from
external AV source) resumes on the TV screen.
ENTER
● When a playback-only disc is played, playback stops and the still
image at the time you press 8 remains on the TV screen. Pressing 8
● If x (EJECT) is pressed during playback, playback stops, then the
disc tray opens.
4
SELECT
9
8
NOTE:
When the Library Database DVD Navi screen appears, choose a
thumbnail image of the desired program on the TV screen, then press
SELECT(4). (੬ pg. 40)
ATTENTION:
● It takes approximately 30 seconds to read a disc depending on the
type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
● It may take a few seconds to start playback. This is not a
malfunction.
● Forward/reverse high-speed search and other operations cannot
be performed while playback is stopped.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
21
Locating The Start Point Of The Item Or Skip The Item
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press VCR/DVD repeatedly so that the DVD lamp lights up on the
unit.
Press 2 or 6 during playback.
● Pressing 6 locates the start point of the item or skips the item for
forward direction, then resumes playback.
● Pressing 2 locates the start point of the item or skips the item for
reverse direction, then resumes playback.
When a DVD-RAM/RW/R disc is played
Current program
1
4
7
2
5
8
0
3
6
9
0 – 9
MARK
Previous
program
Next
program
TOP MENU
MENU
News
Drama
Movie
rtw e
ENTER
2
Reverse
Forward
6
4
SLOW+ (5)
9
●: marked points if any (੬ pg. 22) or beginning of recording
SLOW– (3)
8
Example:
To locate the beginning of the next item, press 6 once.
To locate the beginning of the current item, press 2 once.
To locate the beginning of the previous item, press
2
three times.
When a DVD VIDEO, Audio CD or Video CD disc is played
Playback point
Locating A Desired Scene Using The DVD Menu
Scene 2
(Chapter 2)
or
Scene 3
(Chapter 3)
or
Scene 4
(Chapter 4)
or
DVD VIDEO discs may have top menu and disc menu.
Track 2
Track 3
Track 4
Top menu
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Reverse
Forward
Example:
To locate the beginning of the next item, press 6 once.
To locate the beginning of the current item, press 2 once.
Disc menu
Disc menus include playback data (angle menu, subtitle menu,
etc.) specific to each title.
Variable Speed Search
Press MENU to access the disc menu.
1 Press TOP MENU or MENU to
Example:
access the DVD menu.
During playback, press 5 for forward variable speed search, or
3 for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press 4.
OR
During playback, press and hold 6 for 2 or more seconds for
forward search at 5x speed, or press and hold 2 for 2 or more
seconds for reverse search at –5x speed.
● Releasing the button resumes normal playback.
2 Press rt w e to select a
desired title, then press ENTER.
Playback starts.
desired item using the number
keys depending on the menu
display.
NOTE:
When “X” appears on the TV screen
in step 1, the disc does not have a top menu or disc menu.
For Audio CD
You can perform 4 levels of speed search with 5 and 3.
(Audio is active also during variable speed search.) You cannot
perform slow motion for each direction.
Reverse 3
5 Forward
4 steps
Play Slow Motion
3 steps
3 steps
Play
4 steps
–60 –15 –5 –3
–1
–1/2 –1/4 –1/16 1/16 1/4 1/2
1
3
5
15 60
NOTE:
For slow motion speed search, refer to “Slow Motion” (੬ pg. 22).
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
22
NOTES:
Still Picture/Frame-By-Frame Playback
● “DISC RESUME” setting works on DVD VIDEO, VCD and already
finalized DVD-R/DVD-RW (video mode) discs. For other types of
discs, the function under “ON” setting will be applied even if
“RESUME” is set to “DISC RESUME”. (੬ pg. 59)
● If you stop the playback of a disc for which an resume point has
already been memorized, the memory will be updated with the new
resume point.
● After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
1 Press 9 to pause during playback.
2 Press 9 or w e to activate frame-by-frame playback.
● Each press of 9 advances the still picture frame by frame.
● Each press of w e advances/reverses the still picture frame by
frame.
● Frame-by-frame playback for reverse direction cannot be performed
with Video CD discs.
● To resume normal playback, press 4.
● When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD.
● When “RESUME” is changed to “ON” or “OFF” (੬ pg. 59), resume
points of the discs memorized with “RESUME” set to “DISC
RESUME” will be cleared.
Slow Motion
● Resume points are memorized for each side of a double-sided disc.
1 Press 9 to pause during playback.
2 Press SLOW – (3) or SLOW + (5).
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
Marking Positions To Play Back Again Later
● Slow motion for reverse direction cannot be performed with Video CD
discs.
It is possible to mark positions (up to 999 points) where you want to
play back once again later, and start playback from a marked
position.
Skip Search
To mark positions:
During playback or recording, press
MARK at positions you want to mark.
● “MARK” appears on the TV screen.
You can easily locate the marked
positions using 2 or 6 when you
play back the disc.
During playback, press
.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● Skip search cannot be performed when a Video CD disc is being
played back with the PBC function.
To delete the marked positions:
While paused, press 2 or 6 to
locate a marked position you want to
delete, then press MARK.
Resume Function
● Crossed “MARK” appears on the TV
deleted.
It is possible to memorize the position where you stop playback
and resume playback from that position.
NOTE:
● Be sure to set “RESUME” to “ON” or “DISC RESUME”. (੬ pg. 59)
When a DVD-R/RW (Video mode) disc is finalized, marked points
marked before finalizing will be deleted, and programs will be divided
automatically into “chapters” approximately every 5 minutes.
(੬ pg. 63)
● The unit enters Resume Stop mode and memorize the position
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorizing.)
● The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. (੬ pg. 59)
● Performing the following steps would erase the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
• Press 1 to turn off the unit.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (੬ pg. 59)
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
2 Press 4 in stop mode to resume playback. The unit starts
playback from the resume point.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
23
● To clear the angle selection display, press ENTER. In addition, the
angle selection display disappears automatically if no operation is
done for 10 seconds.
1
4
7
2
5
8
0
3
6
9
Subtitle Selection
0 – 9
DISPLAY
MENU
TOP MENU
Some DVD VIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
rtw e
ENTER
RETURN
PREVIOUS (2)
NEXT (6)
4
“
” appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
8
1 Press SUBTITLE during
ENGLISH
REMAIN
playback. The subtitle selection
display appears on the TV screen.
SUBTITLE
ANGLE
AUDIO
When 3 subtitle languages are
contained.
● Each time you press SUBTITLE,
the subtitle display is switched on
and off.
2 Press w e to select your desired language.
● To clear the subtitle selection display, press ENTER.
Checking The Time Information
NOTES:
● When “X” appears on the TV screen, no subtitle language is
recorded.
● When the subtitle language won’t be changed with the procedure
above, change the subtitle on a disc menu displayed by pressing
MENU.
You can check time information of a disc on the front display panel
and the TV screen.
Press DISPLAY once to display the lastly displayed information. To
changes the display, press DISPLAY repeatedly.
Audio Language/Sound Selection
8 DVD-RAM/DVD-R/DVD-RW
During playback or recording
Clock time (front display panel only) ] Current title elapsed time
] Disc remaining time* ] (back to the beginning)
* only discs before finalizing
Some DVD VIDEO discs contain the multiple audio language or
sound. You can select the desired audio language or sound. For
some Video CD discs, you can switch the audio channel to choose
Karaoke either with or without the vocal.
● Clock time is displayed only when a recordable disc is recorded.
In stop mode
1 Press AUDIO during playback.
● It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
The Audio Language/Sound
● In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press rt to select “FR”, then press w e to
select the desired recording time. (੬ pg. 37)
● It is not possible to switch the recording mode during playback or
while recording.
selection display appears.
When 3 audio languages are
contained.
2 Press AUDIO or w e to select
your desired audio language/
sound.
● Each time you press AUDIO or w e, the audio language/sound
changes.
● To clear the Audio Language/Sound selection display, press ENTER.
During playback or in stop mode
NOTES:
Total remaining time ] Current track elapsed time ] Current track
remaining time ] Total elapsed time ] (back to the beginning)
● When “X” appears on the TV screen, no other audio language is
recorded.
● When the audio language won’t be changed with the procedure
above, change the audio on a disc menu displayed by pressing
MENU.
● Pressing AUDIO to select the audio language/sound is only possible
during playback. It is not possible to select by pressing AUDIO in stop
mode. However, you can select the desired audio language/sound
from the setup menu while in stop mode.
NOTE:
When a PBC-compatible Video CD disc is loaded, deactivate the PBC
function. (੬ pg. 24)
Angle Selection
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains “multi-angle” parts, where the same scene was shot from
different angles.
If the disc contains “multi-angle” parts, “
” appears on the TV
screen at the beginning of the “multi-angle” part.
1 Press ANGLE during playback.
The angle selection display
appears on the TV screen.
When 3 scene angles are
contained.
2 Press ANGLE or w e to select
your desired angle.
● Each time you press ANGLE or
w e, the angle changes.
● When “X” appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit angle
selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
24
It is called “Live Memory Playback” to start playback of the program
being recorded, with a time-lag between a recording point and a
playback point, as shown in the figure below.
Audio Channel Selection
Current playback point
(Live Memory Playback)
When playing discs on which you recorded stereo programs, you
can choose the desired audio channel.
● When “SUPERIMPOSE” is set to “AUTO”, you can confirm on the TV
screen the audio channel you have chosen. (੬ pg. 59)
● Each time you press AUDIO, the audio channel
changes.
Current recording position
Recording start point
(Recording point)
Playback
continues
Recording
continues
TRACK
0
30 min.
1 hour
USE
Currently elapsed recording time
On-Screen Display
For stereo discs
Not only can this unit play back a program previously recorded
while recording another program, but the unit also allows you to
play back from the beginning of a program while continuing to
record the same program.
For audio of left channel
For audio of right channel
Playback Control (PBC) Function
Recording/playback Status Display
Some Video CD discs support the PBC function. PBC is an
abbreviation of “Play Back Control”. A Video CD disc recorded with
PBC has its own menus, such as a list of the songs on the disc.
You can locate a specific scene by using the menu.
1
4
7
2
5
8
0
3
6
9
1 Press 4 in stop mode. The PBC menu appears.
DISPLAY
Live Memory Playback status can be checked by
pressing DISPLAY to display the bar meter on the
superimpose display.
2 Press the number keys to enter the number of the desired
scene. The unit starts playback of the selected item.
● “PBC” appears on the front display panel.
● When “NEXT” or “PREVIOUS” appears on the TV screen:
Pressing NEXT (6) advances to the next page.
Pressing PREVIOUS (2) returns to the previous page.
● You can return to the menu by pressing RETURN.
● The method of the operation is different depending on the disc.
NOTES:
● If you want to playback a PBC-compatible Video CD disc without
activating the PBC function, start playback in stop mode by using the
number keys, instead of the 4 button, to choose the track, then
press ENTER.
● To activate the PBC function when a PBC-compatible Video CD disc
is being played back without the PBC function, press TOP MENU, or
press 8 then press 4.
Press DISPLAY. The current status is superimposed on the TV
screen.
Bar meter display
L
R
L-1
Live Memory Playback
This unit records pictures onto DVD-RAM discs, instead of video
tapes, then plays back the pictures recorded on the discs. This
makes it possible to achieve high-speed writing and read-out that
has not been possible with conventional VCRs, enabling recording
and playback simultaneously.
Superimpose display
High-speed spin
Recording
(High-speed writing)
Playback
(High-speed read-out)
Image figure of DVD-RAM disc
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
25
Overview Of Live Memory Playback
You can play back a program you are recording from the beginning while continuing to record onto a DVD-RAM disc. This is called “Live
Memory Playback”.
(Recording screen)
(Live Memory Playback screen)
To start Live Memory Playback,
press 4 to play back from the
L
R
L-1
beginning OR press
reverse-skip a little
to
To stop Live Memory Playback,
press 8
Checking the
picture currently
being recorded
To display, press LIVE
To clear, press LIVE
To stop recording,
press 8
CHECK
CHECK
(Playback and Live Check screen)
To stop Live Memory Playback,
press 8
Recording stops
L
R
L-1
Live Memory Playback
picture
Recording
picture
NOTES:
● Live Memory Playback could be performed approximately 30
seconds after recording has started.
● Although high-speed search up to approximately 30 seconds before
the current recording point is possible during Live Memory Playback,
once the current recording point is reached, the unit resumes normal
playback and maintains a delay of approximately 30 seconds so that
recording and playback can continue.
● Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.
● Live Memory Playback cannot be performed while recording the
source from DV input.
● When LIVE CHECK is pressed to display the picture currently being
1
4
7
2
5
8
0
3
6
9
ON SCREEN
NAVIGATION
Press NAVIGATION to display
Library Database DVD Navi menu,
then choose a program to play back.
(੬ pg. 39)
4
8
recorded, the picture size may not be correct.
7
LIVE CHECK
Pressing LIVE CHECK during Live
Memory Playback allows you to
check the picture currently being
recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
26
Display During Live Memory Playback
During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely
normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the
TV screen.
When Live Memory Playback reaches the point of 30 seconds before the current recording point by forward high-speed search or other
operations, the unit returns to normal playback.
The superimpose display appears by pressing ON SCREEN. (੬ pg. 14)
The Live Check picture is displayed on the bottom right corner by pressing LIVE CHECK.
Playback counter
Recording mode
Live Memory Playback mark
Playback title number
Recording title number
Recording counter display
(remaining/elapsed time)
Disc used
Present time
Recording input
L
R
L-1
Playback mark
Title name
Bar meter (see below)
Recording mark
Live Check picture
Recording mark
This unit displays the current recording/playback status by the bar meter.
(Example of bar meter display)
Capacity of a disc
Recorded
Not recorded
While stopped
Total length of the program being played back
Current playback position
During playback
Capacity of a disc
Remaining capacity when recording started
Current recording position
While recording
Capacity of a disc
Current playback position
Recording start position
Current recording position
Live Memory Playback
Capacity of a disc
Recording start position
Current playback position
Current recording position
Live Memory Playback of
another program
Total length of the program being played back
Blue (recorded part)
Green (playing part)
Black (unrecorded or unplayed part)
Orange (recording part)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
27
H 9
Pressing once pauses playback (still picture playback). Pressing
repeatedly advances the still picture frame by frame.
Buttons To Be Used During Live Memory Playback
● Turn on the unit.
I
It is useful when watching sports programs, etc.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Pressing once skips back for approximately 7 seconds and resumes
playback.
● Pressing repeatedly skips back continuously as many times as
pressed.
1
4
7
2
5
8
0
3
6
9
J
It is useful when skipping over unwanted sections.
● Pressing once skips forward for approximately 30 seconds and
resumes playback.
● Pressing repeatedly skips forward continuously as many times as
pressed.
K LIVE CHECK
You can check, for example, if the program you are recording has
already finished.
● Pressing once displays the picture currently being recorded and the
one being played back simultaneously.
● Pressing successively clears the Live Check window and displays
only the picture currently being played back.
To Play Back From The Beginning Of The Program
While Recording
A NAVIGATION
Displays Library Database DVD Navi menu. You can choose a
program to play back.
You can play back a program you are recording from the beginning
while continuing to record onto a DVD-RAM disc.
Press 4. Live Memory Playback starts from the beginning of the
program being recorded.
B w e
Available only when paused
Advances/reverses the still picture frame by frame.
● Pressing 2 or 6 allows you to locate the desired scenes.
C 2
● Pressing once skips back to the beginning of the chapter being
played back.
● Pressing down for 2 or more seconds during playback reverses
playback at 5 times the normal speed while pressed. Releasing the
button resumes normal playback.
Available only when paused
● Pressing down for 2 or more seconds reverses playback at 1/16 times
the normal speed.
Instant Replay
You can move back the playback position while continuing to
record onto a DVD-RAM disc.
Press
.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds and
resumes pause.
D 6
● Pressing once skips forward to the beginning of the next chapter
being played back.
● Pressing down for 2 or more seconds during playback advances
playback at 5 times the normal speed while pressed. Releasing the
button resumes normal playback.
Available only when paused
● Pressing down for 2 or more seconds advances playback at 1/16
times the normal speed.
To Watch A Program Previously Recorded While
Recording
You can play back a program you recorded previously while
recording.
1 Press 4 during recording. Live Memory Playback starts.
2 Press 2 or 6 to locate the beginning of the desired
program.
E 3
● Each press of the button during playback advances the playback
speed in 5 steps for reverse direction.
NOTE:
To stop playback, press 8. The program being recorded is displayed.
Available only when paused
● Pressing once reverses playback by 1/16 times the normal speed.
● Each press of the button during reverse 1/16 times slow-motion
reverses slow-motion by 1/16 times, 1/4 times and 1/2 times the
normal speed.
F 5
● Each press of the button during playback advances the playback
speed in 4 steps for forward direction.
Available only when paused
● Pressing once advances playback by 1/16 times the normal speed.
● Each press of the button during forward 1/16 times slow-motion
advances slow-motion by 1/16 times, 1/4 times and 1/2 times the
normal speed.
G 8
Stops Live Memory Playback to return to the screen being
recorded.
Then a resume point is stored.
Pressing 8 again stops recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
28
B Select this for Repeat Playback. (੬ pg. 29)
C Select this for A-B Repeat Playback. (੬ pg. 29)
D Select this for search function. (੬ pg. 29)
(੬ pg. 30)
H Select this to switch picture source type. (੬ pg. 31)
I Current status area for the selected item.
J Select this for Program Playback. (੬ pg. 31)
K Select this for Random Playback. (੬ pg. 31)
L Select this to control the switching interval of the slide show.
(੬ pg. 31)
Using The On-screen Bar
The on-screen bar allows you to control various playback
functions. Some of the functions operated on Navigation Menu can
be controlled on the On-screen bar.
Be sure to clear Library Database DVD Navi screen by pressing
NAVIGATION.
NOTE:
1
4
7
2
5
8
0
3
6
9
Although examples of the on-screen bar are provided here only for 3
types of discs, the on-screen bar will be displayed for whichever disc
indicated in the left column.
ON SCREEN
NAVIGATION
ENTER
Basic Operation On The On-screen Bar
Example: When selecting Picture Control function of DVD
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar. The item
currently selected is highlighted and pointed by H.
2 Press w e to select “
”, then press ENTER. The pop-up
window appears under the selected item.
How To Access The On-screen Bar
1 Press ON SCREEN whenever a disc is loaded.
Contents of the on-screen bar during playback
DVD VIDEO
3 Press rt to select the desired option, then press ENTER.
To clear the on-screen bar
Press ON SCREEN.
Video CD
NOTE:
See the corresponding pages for details on each menu item.
JPEG disc
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
29
A-B Repeat Playback
1
4
7
2
5
8
0
3
6
9
0 – 9
You can repeat the desired part.
CANCEL
ENTER
During playback
ON SCREEN
1 Press ON SCREEN twice to access the on-screen bar.
rtw e
2 Press w e to select “
”.
3 Press ENTER at the beginning of the desired part you want to
repeat (point A). The elapsed playing time of the point A appears
CLEAR (8)
4 Press ENTER at the end of the desired part you want to repeat
(point B). The elapsed playing time of the point B appears.
● The selected part of the disc (between point A and B) is played
repeatedly.
Repeat Playback
You can repeat playback as you like according to the type of disc.
1 Press ON SCREEN twice to access the on-screen bar.
To clear the on-screen bar
Press ON SCREEN.
2 Press w e to select “
”, then press ENTER. The pop-up
window appears under the selected item.
To cancel A-B Repeat Playback
Press w e to select “
”, then press ENTER.
NOTES:
● A-B Repeat Playback may not work properly depending on the type
of disc being used.
● The subtitles recorded around the A-B point may not appear.
● When the end of the item is reached before the end point is set, the
on-screen bar disappears from the TV screen. In such a case, repeat
the procedure from step 1.
● The point B must be set at least 3 seconds after the point A.
● When playing back a DVD, A-B Repeat Playback is possible only
within the same title.
3 Press rt repeatedly to select the desired Repeat mode, then
press ENTER.
DVD-RAM/RW/R
OFF: Repeat playback is not performed.
ALL REPEAT: The whole disc is played back repeatedly.
TITLE REPEAT: The current title is played back repeatedly.
DVD VIDEO
OFF: Repeat playback is not performed.
TITLE REPEAT: The current title is played back repeatedly.
CHAPTER REPEAT: The current chapter is played back repeatedly.
● “
Playback.
● “
” cannot be selected during Program and Random
” cannot be selected while stopped.
Locating The Beginning Of A Desired Selection
Audio CD/Video CD/JPEG/MP3
OFF: Repeat playback is not performed.
TRACK REPEAT*: The current track is played back repeatedly.
You can locate the beginning of a title, chapter, group or track.
During playback or while stopped
* “TRACK REPEAT” cannot be selected for JPEG discs.
To clear the on-screen bar
Press ON SCREEN.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “ ”, then press ENTER.
To cancel Repeat Playback
Repeat the above procedure from step 1, select “OFF” in step 3,
then press ENTER.
3 Press rt to select the desired item, then press ENTER.
● Skip this step for Video CD and Audio CD.
For DVD-RAM/RW/R, DVD VIDEO
“TITLE SEARCH” or “CHAPTER SEARCH” is selectable. (“TITLE
SEARCH” only is selectable while stopped.)
NOTES:
● Repeat Playback is not possible for a Video CD with PBC function.
● Repeat Playback may not work properly depending on the type of the
disc being used.
For JPEG, MP3
“GROUP SEARCH” or “TRACK SEARCH” is selectable.
For Video CD, Audio CD
“TRACK” is selectable.
NOTE:
Settings that are selectable during playback and stop mode differ
depending on the type of disc or search used.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
30
4 Press the number keys to enter the desired item number, then
Simulated Surround Effect
press ENTER.
● Playback starts from the selected section.
Examples:
A To select track 5, press the number key “5”.
B To select track 15, press the number key “1” and “5”.
C To select track 25, press the number key “2” and “5”.
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
If you have specified a wrong selection
Press CANCEL or CLEAR (8) to clear the wrong number, then
enter the correct one before you press ENTER in this step.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “
”, then press ENTER.
● “3D-ON” appears above the selected item and Simulated Surround
Effect is activated.
To clear the on-screen bar
Press ON SCREEN.
● Each time you press ENTER, “3D-ON” appears and disappears
alternately.
NOTES:
● When “X” is displayed on the TV screen in step 4, the chapter you
have selected is not contained in the disc, or chapter search does not
work on the disc.
● Before you press ENTER, playback may start automatically when you
enter the section’s number depending on the disc.
● This function is not possible for a Video CD with PBC function.
To clear the on-screen bar
Press ON SCREEN.
Time Search
To cancel the simulated surround effect
Press ENTER to clear “3D-ON” from the screen.
NOTES:
● The simulated surround effect works correctly only when playing back
a title recorded in multichannels.
● Simulated Surround Effect does not affect the DVD VIDEO bitstream
signal from the [DIGITAL AUDIO OUTPUT] connector.
● When Simulated Surround Effect is activated, the settings of
“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled.
(੬ pg. 58)
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a title (DVD-RAM,
DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD and Audio
CD).
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “
”, then press ENTER. The pop-up
window appears under the selected item.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
3 Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
1 Press ON SCREEN twice to access the on-screen bar.
Example:
2 Press w e to select “
”, then press ENTER. The pop-up
To play back from a point 12 (minutes): 50 (seconds) elapsed.
window appears under the selected item.
Press 1
Press 5
Press 2
Press 0
3 Press rt to select the desired option, then press ENTER.
NORMAL: Normally select this option.
CINEMA: Suitable for a movie disc, etc.
If you have specified a wrong selection,
SHARP: Clearer, sharper-edged picture when viewing images with
lots of flat, same-colored surfaces such as cartoons.
SOFT: Select this option when too much noise appears.
Press CANCEL (for the last entered number) or CLEAR (8) (for
whole numbers) to clear the wrong number, then enter the correct
one(s) before you press ENTER in this step.
To clear the on-screen bar
Press ON SCREEN.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● When “X” is displayed on the TV screen in step 3, you have selected
a point that exceeds the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and it is not
possible to use the Time Search function. In such cases, “X” is
displayed on the TV screen as well.
● This function is not possible for a Video CD with PBC function.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
31
3 Press the number keys to
enter the track numbers in the
desired order.
Examples:
1
4
7
2
5
8
0
3
6
9
A To select track 5, press the
number key “5” and ENTER.
B To select track 15, press the
number key “1” and “5”.
0 – 9
CANCEL
ON SCREEN
C To select track 25, press the number key “2” and “5”.
rtw e
ENTER
2
If you have specified a wrong selection
Press CANCEL. The last selection is erased.
Or press CLEAR (8). The whole selection is erased.
6
4
CLEAR (8)
4 Press 4. Playback starts in the programmed order.
● When all of the programmed tracks have been played back, Program
Playback stops, but the programmed information remains.
● To add tracks to the end of the program, perform steps 1 through 3.
● During Program Playback, pressing 6 skips to the next selection of
the program. Pressing 2 returns to the beginning of the current
selection.
To clear the on-screen bar and the contents of the program
Setting The Progressive Mode
Press ON SCREEN.
To cancel Program Playback
Press w e to select “PRGM”, then press ENTER.
NOTE:
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
Program Playback is not possible depending on the type of disc.
Random Playback
1 Set the unit to the progressive scan mode. Refer to “Scan Mode
Set” (੬ pg. 65).
2 Press ON SCREEN twice to access the on-screen bar.
You can play back all the tracks on the disc in random order.
While stopped
3 Press w e to select “
”, then press ENTER. The pop-up
window appears under the selected item.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “RND”, then press ENTER. Playback starts
in random order.
4 Press rt to select the desired option, then press ENTER.
AUTO 1: Used to play a disc containing both video and film source
materials. This system recognizes the source type (video or film)
of the current disc according to the disc information. Normally
select this option.
AUTO 2: Almost the same as the “AUTO 1”, but the processing of
the scenes with movement is different. Select “AUTO 1” or
“AUTO 2” to your preference.
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
FILM: Suitable for playing back a progressive scanned film source
NOTE:
disc.
The same track will not be played back more than once during Random
Playback.
VIDEO: Suitable for playing back a video source disc. The outlines
on the played back pictures will be soft.
Select The Switching Interval Of The Slide Show
To clear the on-screen bar
Press ON SCREEN.
Program Playback
You can control the switching interval of the slide show.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “
”, then press ENTER. The pop-up
window appears under the selected item.
You can program up to 30 tracks to play back in the desired order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press w e to select “PRGM”, then press ENTER. The program
table appears under on-screen bar.
3 Press rt to select the desired option, then press ENTER.
● Each time you press rt, the interval changes as follows:
5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. { 30
SEC. { (Back to the beginning)
To clear the on-screen bar
Press ON SCREEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON DVD DECK
EN
32
11Press the number keys to enter the same password as in
step 8 above, then press ENTER.
Parental Lock
12Press SET UP twice to complete the setting.
NOTE:
This function restricts playback of DVD VIDEO discs which contain
violent (and other) scenes according to the level set by the user.
For example, if a movie which includes violent scenes supports the
parental lock feature, such scenes which you do not want to let
children view can be cut or replaced by other scenes.
To Change The Settings
You can change the Parental lock settings later.
1 Perform steps 1 to 5 of “To Set Parental Lock For The First
Time” to access the “PARENTAL LOCK” screen before continuing.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
To change the level
3 Press rt to select the desired level, then press ENTER.
4 Press rt to select “COUNTRY CODE”, then press ENTER.
VCR/DVD
5 Press rt to select your country code, then press ENTER.
1
4
7
2
5
8
0
3
6
9
● See “Country/Area Code List for Parental Lock” (੬ pg. 71).
0 – 9
6 Press the number keys to enter the same password as in
step 8 of “To Set Parental Lock For The First Time”, then press
ENTER.
ENTER
SET UP
rtw e
7 Press SET UP twice to complete the setting.
NOTE:
If you forget your password, enter “8888” in step 6.
To Temporarily Release Parental Lock
When you set the parental lock level strictly, some discs may not be
played back at all. When you insert such a disc and try to play it
back, the confirmation screen appears on the TV screen, asking
you whether you want Parental Lock to be temporarily released or
not.
1 Load a disc.
To Set Parental Lock For The First Time
While stopped
● If the disc is rated higher than the selected level, the confirmation
screen appears.
2 Press w e to select “YES”, then press ENTER.
● If you select “NO”, you cannot play back that disc.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3 Press the number keys to enter the same password as in
step 8 of “To Set Parental Lock For The First Time”, then press
ENTER.
● When you enter the correct password, the Parental Lock is released
and the unit starts playback.
● If you enter a wrong password, “ENTRY ERROR RETRY” appears on
the TV screen. Enter the correct password.
● If you have successively entered wrong password three times,
“ENTRY ERROR CAN NOT CHANGE PASSWORD” appears on the
TV screen. In such a case, press ENTER. The disc will stop. Then
play back the disc again, and try the procedure again from step 1.
2 Press SET UP to access the Main Menu screen.
3 Press w e to select “DVD SET UP”, then press ENTER.
4 Press w e to select “UTILITY”,
then press ENTER.
5 Press rt to select
“PARENTAL LOCK”, then press
ENTER.
NOTE:
6 Press rt to select
“PARENTAL LEVEL”, then press
ENTER.
If you forget your password, enter “8888” in step 3.
7 Press rt to select the desired
level, then press ENTER.
● The smaller the value of level is,
the more restrictive the Parental
Lock level becomes.
● Select “NONE” to cancel the
restriction.
8 Press the number keys to
enter your desired four-digit
number, then press ENTER.
● If you made a mistake, enter a
correct number again.
“COUNTRY CODE”, then press
ENTER.
10Press rt to select your
country code, then press ENTER.
● If you do not need to change your country code, jump to 12.
● See “Country/Area Code List for Parental Lock” (੬ pg. 71)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON VCR DECK
EN
33
1 Load a cassette. Make sure the window side is up, the rear label
side is facing you and the arrow on the front of the cassette is
pointed toward the unit.
● Do not apply too much pressure when inserting.
● If the record safety tab has been removed, playback begins
automatically. However, if “REC SAFETY” is set to “OFF” (੬ pg. 61),
playback will not begin automatically.
Basic Playback
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● The unit’s power comes on automatically and the counter is reset to
0:00:00.
VCR/DVD
3
5
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3 Find the program start point. If the tape is advanced past the
start point, press 3. To go forward, press 5.
4 Press 4 to start playback.
5 Press 8 to stop playback.
VCR Lamp
● To eject the cassette, press x (VCR).
8
x
4
Clean the video heads using a dry cleaning cassette
— TCL-3F — when:
VCR/DVD
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
1
4
7
2
5
8
0
3
6
9
● “USE CLEANING CASSETTE” appears on the screen (only with
“SUPERIMPOSE” set to “ON” or “AUTO”). (੬ pg. 61)
NOTE:
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or humidity
● in a dusty environment
● flaw, dirt or mold on video tapes
● continuous usage for a long time
4
5
3
8
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on this unit. Simply
place the recorded cassette into a VHS Cassette Adapter and it can be
used just like any full-sized VHS cassette.
** This unit can record on regular VHS and Super VHS cassettes. While
only VHS signals can be recorded on regular VHS cassettes1), both
VHS and Super VHS signals can be recorded and played back using
Super VHS cassettes.
1)By using the S-VHS ET function, it is possible to record and play back
with S-VHS picture quality on VHS cassettes with this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON VCR DECK
EN
34
Variable Speed Search
During playback, press 5 for forward variable speed search, or
3 for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
When pressing 5:
(SP): +5x{+11x
(EP): +11x{+31x
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press VCR/DVD repeatedly so that the VCR lamp lights up on the
unit.
When pressing 3:
Once 3 is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of 3 changes the search
speed between –5x and –11x in SP mode, –11x and –31x in EP
mode.
VCR Lamp
VCR/DVD
3
5
(SP): –1x]–5x{–11x
(EP): –1x]–11x{–31x
● To resume normal playback, press 4.
Instant Replay
TBC
INPUT SELECT +/– TBC Lamp
VCR/DVD
During playback, press
. The unit rewinds the picture a little
8 4 97
(about 7 seconds) and resumes playback.
● If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
1
4
7
2
5
8
0
1
Skip Search
During playback, press
sections.
6
9
1 to 6 times to skip over unwanted
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● To resume normal playback, press 4.
2
6
4
5
9
Index Search
3
8
Your unit automatically marks index
codes at the beginning of each
recording. This function gives you
quick access to any one of 9 index
codes in either direction.
INPUT +/–
AUDIO
NOTE:
Before starting, make sure the unit is in
the Stop mode.
ATTENTION:
Press 2 or 6 to activate Index Search. “INDEX –1” or “INDEX
1” is displayed on the TV screen and search begins in the
corresponding direction.
● To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
In the search, still, slow-motion or frame-by-frame playback mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of color.
● you cannot hear the sound.
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
Still Picture/Frame-By-Frame Playback
1 Press 9 to pause during playback.
Current position
2 Press 9 to activate frame-by-frame playback.
● To resume normal playback, press 4.
Slow Motion
1 Press 9 to pause during playback.
2 Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
● The speed changes for each direction by pressing 3 and 5
repeatedly.
Index number
● When the specified index code is located, playback begins
● To resume normal playback, press 4.
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS ON VCR DECK
EN
35
Next Function Memory
The Next Function Memory “tells” the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L, HI-FI
R and NORM) and will play back the one you select.
For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
During Playback
Pressing AUDIO changes the soundtrack as follows:
For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x (VCR) on the unit within 2 seconds.
TRACK
USE
On-Screen Display
Repeat Playback
HI-FI
Hi-Fi sound is played back
Your unit can automatically play back the whole tape repeatedly.
Sound on the left Hi-Fi channel is
played back
HI-FI L
1 Press 4 to start playback.
Sound on the right Hi-Fi channel is
played back
●
lights up on the front display panel.
HI-FI R
NORM
3 Press 8 at any time to stop Repeat Playback.
● Pressing 4, 3, 5 or 9 also stops Repeat Playback.
Sound on the normal track is played
back
NOTES:
● To select the returning point (recording end or tape end), see
“RETURN POINT” on page 61.
Both sounds on the Hi-Fi track and
normal track are mixed and played
back
NORM
HI-FI
● It is possible to use the Mode Lock function. (੬ pg. 65)
NOTES:
Manual Tracking
● “HI-FI” should normally be selected. In this mode, Hi-Fi stereo tapes
are played back in stereo, and the normal audio track is played back
automatically for tapes with only normal audio.
● “SUPERIMPOSE” must be set to “ON” or “AUTO” or the on-screen
displays will not appear. (੬ pg. 61)
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the INPUT SELECT buttons.
VHS Progressive Scan
You can watch the image on VCR deck in the Progressive scan
mode via component video.
1 During playback, press INPUT SELECT +/– on the unit
ATTENTION:
simultaneously to activate manual tracking.
Your TV needs to be compatible with Progressive and to have
Component video input connectors.
2 Press INPUT SELECT +/– on the unit or INPUT +/– on the
remote control to adjust the tracking manually.
A Set the Progressive-compatible TV to the component input
mode.
● To return to automatic tracking, press INPUT SELECT +/– on the
unit simultaneously or eject and insert the tape again.
B Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit, then press PROGRESSIVE SCAN for 3 or more seconds
so that the Video output indicator ( ) lights on the front display
panel.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
C Press VCR/DVD repeatedly so that the VCR lamp lights up on
Adjusting picture condition — Digital TBC/NR
the unit.
D Press VCR]DVD.
Your unit is equipped with the Digital TBC (Time Base Corrector)
that removes jitter from fluctuating video signals to deliver a stable
picture even with old tapes and rental cassettes.
The Digital 3-DNR (Noise Reduction) which cuts noise and
enables clear picture reproduction is also linked to this function.
We recommend that you use the DIGITAL TBC/NR function
when...
NOTE:
Be sure to engage the DVD deck in stop mode.
— playing back a tape recorded on a camcorder.
— playing back a tape repeatedly used.
— using this unit as the source player for editing.
Press TBC on the unit so that the TBC lamp lights up on the unit.
● Each time you press the button, it toggles this function on and off.
NOTES:
the picture may become more stable with Digital TBC/NR
deactivated.
● If you play back a tape where certain types of signals are recorded
(using a PC or some character generators) with Digital TBC/NR
activated, the playback picture may be distorted. In this case,
deactivate Digital TBC/NR.
● Digital TBC/NR and Video Stabilizer (੬ pg. 61) cannot be used at
the same time; if you activated Digital TBC/NR when “VIDEO
STABILIZER” is set to “ON”, Video Stabilizer will be automatically
turned “OFF”. Make sure Digital TBC/NR is deactivated when you
want to use Video Stabilizer.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
EN
36
D Rewind the tape fully to the beginning and set the VCR deck to
the stop mode.
E Press REC MODE repeatedly to set the recording mode.
displayed. Thereafter, each time you press REC MODE, the
recording mode alternates between SP and EP.
Simultaneous Recording
This function allows you to record programs on both DVD deck and
VCR deck simultaneously from the same input source (F1 or L1). It
is useful when you require both DVD and tape version of a program
you are recording once recording is complete.
NOTE:
choose to start preparation for the VCR deck first. In whichever case,
the recording source selection in step C must be the same.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
3 Press 7 and 9 simultaneously to set to record pause mode.
● Both the DVD and VCR deck will enter the Record Pause mode at the
same time.
● If the recording source selected in step C differs on the DVD and
VCR deck, only the current selected deck will enter the Record
Pause mode.
ATTENTION:
It is not possible to record programs on a DVD-R disc which has
already been finalized.
stop mode automatically while the DVD deck remains in the Record
Pause mode.
VCR Recording Lamp
VCR/DVD REC MODE
4 After about 10 seconds, press 4 to start recording.
● Both the DVD and VCR deck start recording at the same time. Both
the DVD and VCR recording lamps light on the unit.
● If the recording source selected in step C differs on the DVD and
VCR deck, only the current selected deck will start recording.
● If you start recording immediately after setting the decks to Record
Pause mode in step 3, the current selected deck will start recording
while the other deck remains in the Record Pause mode. Be sure to
wait for about 10 seconds.
8
4
9 7
INPUT SELECT +/–
DVD Recording Lamp
5 To pause recording, press 9.
● Both the DVD and VCR deck will enter the Record Pause mode at the
same time.
VCR/DVD
● To resume recording, press 4.
1
4
7
2
5
8
0
3
6
9
6 To stop recording, press 8.
● Both the DVD and VCR deck will stop recording at the same time.
NOTES:
stop mode, Simultaneous Recording will not work.
4
● It is recommended to format a DVD-RAM disc before use if you use
the disc on this unit for the first time.
● Recordings made on DVD-R/RW disc must be finalized to play back
on other DVD players. Perform “Finalize A Disc (DVD Deck Only)”
(੬ pg. 63)
8
9
7
REC MODE
INPUT +/–
● You can record up to 99 programs and 99 play lists on each disc.
● When recording is started, an index of the first part of recording is
automatically recorded. (੬ pg. 39) To delete the index, refer to
page 41.
● Recording on the DVD deck sometimes may stop or cannot be
performed even if there is enough available capacity remaining on the
disc.
1 Prepare the DVD deck for recording.
A Load a recordable disc.
● For details, refer to “Placing A Disc” (੬ pg. 10).
B Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
C Press INPUT SELECT +/– on the unit or INPUT +/– on the
remote control to select the recording source (F1 or L1).
D Set the DVD deck to the stop mode.
E Press REC MODE repeatedly to set the recording mode.
● When you press REC MODE once, the current recording mode is
recording mode changes as follows:
XP ] SP ] LP ] EP ] FR ] (Back to the beginning)
* The value is selectable from 1 to 6 hours in 5-minute intervals, from 7 to
“FR60–FR360”, “FR420” and “FR480”. To change the value in 30-
minute intervals, press and hold w e.
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its safety tab and set “REC
SAFETY” to “ON” (੬ pg. 61). To
record on it later, cover the hole
with adhesive tape or set “REC
SAFETY” to “OFF”.
Record safety tab
● For details on the recording mode, see page 37.
2 Prepare the VCR deck for recording.
A Load a cassette with the record safety tab intact. If not, set
“REC SAFETY” to “OFF” (੬ pg. 61).
● The counter is reset to 0:00:00.
B Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
C Press INPUT SELECT +/– on the unit or INPUT +/– on the
remote control to select the recording source (F1 or L1).
● The recording source selected MUST be the same as that selected
for the DVD deck.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
EN
37
Recording Mode
Free Rate Function
MPEG2 format is used as recording format. As a guide for picture
quality, the “bps” unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programs where quick movement occurs, such
as sports programs, and LP or EP for talk shows, etc. with
relatively less movement.
To record the entire program, the unit automatically set the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining
disc space or the specified recording time (from 60 minutes to 480
minutes).
8 To record the entire program by specifying the desired
recording time
The recording modes for a 4.7 GB disc are set as follows:
Select “FR60–FR360”, “FR420” or “FR480” in a recording mode
selection procedure. (੬ pg. 36)
Recording
mode
Recording amount
(approx.)
Maximum recording
time (approx.)
8 To record a 25-min. long daily program five times just on a
same disc for example
Be sure to set the recording mode to “FR125” to fit the total
recording time to the whole disc space.
XP
SP
10 Mbps
5 Mbps
1 hour
2 hours
4 hours
6 hours
1 – 6 hours
7 hours
8 hours
LP
2 Mbps
A: 1st
B: 2nd
C: 3rd
EP
1.6 Mbps
Blank
FR60–FR360
FR420
FR480
D: 4th
E: 5th
The amount varies
depending on the
selected time.
When the same program is recorded in SP mode instead of in
“FR125”, the 5th program cannot be recorded.
A: 1st
B: 2nd
C: 3rd
D: 4th
E: Blank (20 min.)
Blank
Recording Features (DVD Deck)
● Turn on the unit.
NOTES:
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press VCR/DVD repeatedly so that the DVD lamp lights up on the
unit.
● In order to ensure that the recording fits on the disc, this feature may
leave a slight non-recorded section at the end of the disc.
● There may be some noise and sound disturbance at the point on the
disc where the unit switches the mode.
1
4
7
2
5
8
0
3
6
9
DISPLAY
REMAIN
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)
● You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of disc
remaining times for all recording modes appears on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
EN
38
● Depending on the type of tape being used, the tape remaining time
reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
Recording Features (VCR Deck)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press VCR/DVD repeatedly so that the VCR lamp lights up on the
unit.
The Video Calibration checks the condition of the tape in use
during playback and recording, and compensates to provide the
highest-possible playback and recording pictures. You can set
“VIDEO CALIBRATION” to “ON” or “OFF” to your preference.
(੬ pg. 60)
VCR/DVD
Playback
The unit assesses the quality of the tape once you initiate
playback.
● The unit adjusts the playback picture quality based on the quality of
the tape in use.
● Video Calibration is active during automatic tracking. The Video
Calibration screen appears blinking on the TV screen.
VCR Lamp
8
7
NOTES:
● When watching a tape recorded with “VIDEO CALIBRATION” set to
“ON”, it is recommended that you leave “VIDEO CALIBRATION” on
during playback as well.
VCR/DVD
● When watching a rental tape or one recorded on another VCR, or
when using this unit as the player for editing, set “VIDEO
CALIBRATION” to your preference. (੬ pg. 60)
● The Video Calibration only appears at the beginning of automatic
tracking. Even though it doesn’t appear after that, the VIDEO
CALIBRATION function is operative.
1
4
7
2
5
8
0
3
6
9
CANCEL
DISPLAY
Recording
The unit assesses the quality of the tape once you initiate
recording.
● The unit spends approximately 7 seconds assessing the condition of
the tape, then begins recording.
4
7
8
NOTES:
● The Video Calibration works for both SP and EP modes only after a
tape has been inserted and the Record mode is first initiated. It does
not work during recording.
● Once the cassette is ejected, the Video Calibration data is cancelled.
The next time the cassette is used for recording, Video Calibration is
re-performed.
-
Repeat Recording
You can record programs on one tape repeatedly. The tape is
automatically rewound to the beginning to continue recording when
the end of tape is reached during recording. The previously
recorded programs will be overwritten.
ATTENTION:
Since the Video Calibration works before recording actually starts,
there is a delay of approximately 7 seconds after 7 and 4 on the
Remote are pressed, or 7 on the unit is pressed. To make sure you
record the desired scene or program in its entirety, first perform the
following steps:
During recording, press and hold
4
and
7
on the remote control or
A While holding 9, press 7 to engage the Record Pause mode.
● The unit then automatically checks the condition of the tape and,
after approximately 7 seconds, re-enters Record Pause mode.
B Press 4 to start recording.
If you want to bypass the Video Calibration and begin recording
immediately, set “VIDEO CALIBRATION” to “OFF”. (੬ pg. 60)
7
on the unit for more than 5 seconds.
● The recording lamp on the unit starts to blink slowly.
To stop recording, press 8.
NOTE:
It is possible to use the Mode Lock function (੬ pg. 65).
Elapsed Recording Time Indication
1 Press DISPLAY until a counter reading appears on the front
display panel.
2 Press CANCEL to reset the counter before starting recording or
playback.
● The counter is reset to “0:00:00” and shows the exact elapsed time
as the tape runs. You can check the exact time of a recording or
playback.
Tape Remaining Time
1 Press DISPLAY until the time remaining on the tape appears.
● By pressing the DISPLAY button, you can change display to show
the clock time, counter reading or tape remaining time.
NOTES:
● When you press ON SCREEN, the on-screen display appears on the
TV screen for 5 seconds, then the displays other than the counter
disappears. To clear the counter display, press ON SCREEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
39
Using Library Database DVD Navi system, you can easily modify
registered information, edit the program or play list, as well as
search for the beginning of each program.
Library Database DVD Navi
About registration of information
The following information is automatically registered for each
program when ordinary recording is performed, then stored in an
area specified on the unit.
● index* (reduced still pictures to show program titles)
● program title*
● category*
● date and time
● input select
● recording mode
The Library Database DVD Navi enables you to search and select
the desired programs recorded on a DVD-RAM/R/RW disc very
easily.
You can record up to 99 programs on a disc.
Each time a program is recorded on the disc, the information of the
program is registered for the Library Database DVD Navi
automatically.
So, you can confirm the information of the programs recorded on
the disc with the Library Database DVD Navi screen. And, you can
also select one of the programs recorded on the disc using the
Library Database DVD Navi.
● length of recording time
Navi system.
About editing of programs
Library Database DVD Navi system has the following functions for
editing of programs.
● “Edit Play List Information” (੬ pg. 42)
● “Delete Program” (੬ pg. 41)
The following screen appears as the Library Database DVD Navi
screen when you press NAVIGATION. You can move the arrow to
select the desired position on the screen by pressing rt w e on
the remote control.
The limitations of registration
You can register information up to 99 programs.
When the amount of information is at the limits of registration, you
cannot record new program any more. In this case, you need to
delete old programs to register new one. (੬ pg. 41)
NOTE:
Once a DVD-R/RW (Video mode) disc has been finalized, the displays
for original and play list do not appear. Only display for library appears.
The display for original
recording
The display for play list
A Index
(Small still picture of each program)
B Names of functions
ORIGINAL (੬ pg. 40)
PLAY LIST (੬ pg. 42)
LIBRARY (੬ pg. 44)
C Remaining time
(Based on the recording mode currently selected)
D Current/Total number of program(s)
(For example, there are 6 recorded programs and the program
indicated by the arrow is the 1st one.)
E Icons
(Indicate the recording situation for each program.)
: This program is write-protected.
F Recording information for the program indicated by the arrow
G Guidance for operations
H Operational commands
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
40
Scan For Beginning(s) Of Program(s)
Edit Original Information
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
MEMO
NAVIGATION
ENTER
1
4
7
2
5
8
0
3
6
9
rtw e
0 – 9
4
SELECT
9
8
CLEAR
NAVIGATION
ENTER
rtw e
2
3
6
4
SELECT
8
CLEAR
5
9
You can scan the beginning of the program easily with the Library
Database DVD Navi.
1 Load a recorded disc.
2 Press NAVIGATION. The Library Database DVD Navi screen
appears.
Modify Index
3 Press rt w e to select
“ORIGINAL”, then press ENTER.
1 Press NAVIGATION. The Library Database DVD Navi screen
appears.
2 Press rt w e to select “ORIGINAL”, then press ENTER.
3 Press rt w e to select one program you want to modify, then
press t.
4 Press rt w e to select “MODIFY”, then press ENTER.
5 Press w e to select “MODIFY INDEX”.
4 Press w e to select the index
(small still pictures) of the desired
program.
6 Search for the picture from the
program by pressing the
appropriate buttons (3, 4,
5, or 9). The pictures of the
program appear on the left
window.
● When you want the plural
programs to be played back
continuously, press MEMO after
selecting the desired program.
The numbers of the playback
order appear on the index. You
can select up to 30 programs.
● When you want to correct the order, move the arrow to the desired
index and press MEMO. The number disappears and the unit re-
numbers the other programs automatically.
● When you want to cancel the order, press CLEAR (8).
7 Confirm the arrow is on
“REPLACE”, then press ENTER to
register new index. New index
appears on the right window.
● When you press ENTER with the arrow on “RETURN” you can return
to the previous screen.
5 Press SELECT (4) to start playback.
8 Press NAVIGATION to return to the normal screen.
● Press 8 to cancel pause mode after pressing NAVIGATION.
6 Press 9 to pause playback.
● To resume normal playback, press 4.
7 Press 8 to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
41
Modify Program Name
Delete Program
You cannot record any more with Library Database DVD Navi once
the registered programs on the disc reach 99 programs. Deleting
increase remaining time and available recording capacity. (For
DVD-R discs, although it is possible to delete recorded programs,
available recording capacity does not increase.) The deleted
program is never resumed. Play lists and program information in
the unit’s library are also deleted.
1 Perform steps 1 to 3 of “Modify Index” (੬ pg. 40) before
continuing.
2 Press rt w e to select “MODIFY”, then press ENTER.
3 Press w e to select “MODIFY NAME”.
4 Press rt w e to select the
desired letter or command, then
press ENTER. Repeat this
process to complete the name.
● To correct a letter, press rt w e
to select “DELETE” or “DELETE
ALL”, then press ENTER.
● You can enter the letters up to 64.
● You can also enter the new name
with the number keys. For example, when you press 2 repeatedly,
“A”, “B”, “C”, “a”, “b”, “c”, “2”, and then “A” appear by turns. You can
use the following buttons.
1 Perform steps 1 to 2 of “Modify Index” (੬ pg. 40) before
continuing.
2 Press rt w e to select one program you want to delete, then
press t.
3 Press rt w e to select “DELETE”, then press ENTER. The
message appears for your confirmation.
4 Press w e to select “YES”, then press ENTER.
● When you cancel the deletion, select “NO”, then press ENTER.
Number keys: for entering letters, numbers and blank space
w e buttons: for moving the entering or inserting point
CLEAR (8) button: for correcting a letter
Delete Unwanted Part Of The Program
(DVD-RAM & DVD-RW (VR mode) only)
You can delete unwanted part of the program.
2/6 buttons: for changing character tables
5 Press rt w e to select “SAVE”, then press ENTER.
1 Perform steps 1 to 2 of “Modify Index” (੬ pg. 40) before
continuing.
Library Database DVD Navi screen appears again.
2 Press w e to select one program whose unwanted part you
7 Press NAVIGATION to return to the normal screen.
want to delete, then press t.
Modify Category
3 Press w e to select “EDITING”, then press ENTER.
4 Press 4 to start playback. The playback pictures appear in the
window on the screen. The elapsed playing time starts counting
with the arrow on “IN”.
1 Perform steps 1 to 3 of “Modify Index” (੬ pg. 40) before
continuing.
2 Press rt w e to select “MODIFY”, then press ENTER.
3 Press w e to select “MODIFY CATEGORY”.
5 Find the point where you want
the deletion to begin, then press
ENTER with the arrow on “IN”.
The edit-in time is fixed and the
elapsed playing time starts
counting again.
4 Press rt w e to select the
desired category, then press
ENTER.
5 Press ENTER. The Library
Database DVD Navi screen
appears again.
6 Find the point where you want
the deletion to end, then press
ENTER with the arrow on “OUT”.
The edit-out time is fixed.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out
points.
6 Press NAVIGATION to return
to the normal screen.
Protect Title (DVD-RAM & DVD-RW (VR mode) only)
You can protect the program to prevent accidental erasure of the
important program.
7 Press rt w e to select “PREVIEW”, then press ENTER to
preview the edited program.
8 Press rt w e to select “EXECUTE”, then press ENTER.
● If you do not want to delete the scene, select “CLEAR” and press
ENTER.
continuing.
2 Press rt w e to select a program you want to protect, then
9 Press w e to select “YES”, then press ENTER. The selected
press t.
scene is deleted.
● To cancel the deletion, press w e to select “NO”, then press ENTER.
appears.
● To cancel the protection, repeat 2 – 3 again.
”
To modify the points
A Press w e to select “CLEAR”, then press ENTER.
B Press r to select “IN”, then repeat steps 4 – 9.
4 Press NAVIGATION to return to the normal screen.
10Press NAVIGATION to return to the normal screen.
NOTES:
● There may be a discrepancy of several seconds between the scene
you intend to edit, and the scene which is actually edited.
● Available recording capacity may not match the deleted part after
deletion.
NOTE:
All the programs on a disc will be deleted once the disc is formatted
even if they are protected titles. (੬ pg. 62)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
42
the play list.
Edit Play List Information
9 Press w e to select “EXECUTE”, then press ENTER. The play
list is created.
To modify the points
A Press w e to select “CLEAR”, then press ENTER.
B Repeat steps 5 – 9 as necessary.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
10Press NAVIGATION to return to the normal screen.
NOTES:
● There may be a discrepancy of several seconds between the scene
you intend to edit, and the scene which is actually edited.
● The title, index and category of the play list can be modified in the
● You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest edition,
etc.
1
4
7
2
5
8
0
3
6
9
NAVIGATION
ENTER
Add Scenes To A Play List
rtw e
1 Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
2 Press w e to select the play list to which you wish to add a
scene, then press t.
3 Press w e to select “EDITING”, then press ENTER.
4 Press w e to select “ADD
SCENE”.
5 Press 4 to start playback. The
playback pictures appear in the
window on the screen. The
elapsed playing time starts
counting with the arrow on “IN”.
● To locate the beginning of other
titles, press 2/6.
Play List
It is a collection of the scenes. A play list can be freely edited and
played back without ever changing any original recording data.
Using the random access of a DVD disc (which allows video data
to be instantly read no matter where it is on the disc), a play list
includes information such as the timer counter for the playback
start point and end point, indexes for checking the contents of
recorded data, category information, and more. Playback
according to a play list you have created allows you to enjoy
various combinations of video images from a single program.
6 Find the point where you want the added scene to begin, then
press ENTER with the arrow on “IN”. The edit-in time is fixed and
the elapsed playing time starts counting again.
7 Find the point where you want the added scene to end, then
press ENTER with the arrow on “OUT”. The edit-out time is fixed.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out
points.
Create Play List
1 Load a DVD-RAM or DVD-RW (VR mode) disc that was
approximately 5 seconds before and after the edited scene.
recorded with this unit.
9 Press w e to select “EXECUTE”, then press ENTER. The
2 Press NAVIGATION. The Library Database DVD Navi screen
selected scene is added.
appears.
To modify the points
A Press w e to select “CLEAR”, then press ENTER.
B Repeat steps 5 – 8 as necessary.
3 Press rt w e to select “PLAY LIST”, then press ENTER.
4 Press rt w e to select “CREATE”, then press ENTER.
5 Press 4 to start playback. The playback pictures appear in the
window on the screen. The elapsed playing time starts counting
with the arrow on “IN”.
10Press NAVIGATION to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the scene you
intend to edit, and the scene which is actually edited.
● To locate the beginning of other titles, press 2/6.
6 Find the point where you want
the created play list to begin, then
press ENTER with the arrow on
“IN”. The edit-in time is fixed and
the elapsed playing time starts
counting again.
Move Scenes
1 Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
2 Press w e to select a play list into which you wish to move a
scene, then press t.
7 Find the point where you want
the created play list to end, then
3 Press w e to select “EDITING”, then press ENTER.
press ENTER with the arrow on
4 Press w e to select “MOVE
“OUT”. The edit-out time is fixed.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out
points.
SCENE”.
5 Press 4 to start playback. The
playback pictures appear in the
window on the screen. The
elapsed playing time starts
counting with the arrow on “IN”.
● To locate the beginning of other
titles, press 2/6.
● The edit-out point must come after the edit-in point.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
43
6 Find the point where you want the moved scene to begin, then
press ENTER with the arrow on “IN”. The edit-in time is fixed and
the elapsed playing time starts counting again.
Play Back Play List
1 Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
7 Find the point where you want the moved scene to end, then
press ENTER with the arrow on “OUT”. The edit-out time is fixed.
2 Press w e to select the index
(small still pictures) of the desired
play list.
● When you want the plural play lists
to be played back continuously,
8 Press 4 to start playback.
9 Find the point where you want the moved scene to be moved,
then press ENTER with the arrow on “MOVE TO”.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in, edit-out and
move-to points.
press MEMO after selecting the
desired play lists. The numbers of
CREATE
10Press w e to select “PREVIEW”, then press ENTER to
point to which the scene has been moved.
the playback order appear on the
index. You can select up to 30 play
lists.
● When you want to correct the order, move the arrow on the desired
index and press MEMO. The number disappears and the unit re-
numbers the other play lists automatically.
11Press w e to select “EXECUTE”, then press ENTER. The
selected scene is moved.
To modify the points
● When you want to cancel the order, press CLEAR (8).
A Press w e to select “CLEAR”, then press ENTER.
B Repeat steps 5 – 11 as necessary.
3 Press ENTER or SELECT (4) to start playback. The playback
starts.
12Press NAVIGATION to return to the normal screen.
NOTE:
● To resume normal playback, press 4.
There may be a discrepancy of several seconds between the scene you
intend to edit, and the scene which is actually edited.
5 Press 8 to stop playback.
Delete Play List
Delete Unwanted Part From Play List
1 Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
1 Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
continuing.
2 Press w e to select one play list you want to delete, then press
2 Press w e to select a play list from which you wish to delete
t.
unwanted parts, then press t.
3 Press w e to select “DELETE”, then press ENTER.
3 Press w e to select “EDITING”, then press ENTER.
4 Press w e to select “YES”, then press ENTER.
4 Press w e to select “DELETE
● When you cancel the deletion, select “NO”, then press ENTER.
SCENE”, then press ENTER.
5 Press NAVIGATION to return to the normal screen.
5 Press 4 to start playback. The
playback pictures appear in the
window on the screen. The
elapsed playing time starts
counting with the arrow on “IN”.
● To locate the beginning of other
titles, press 2/6.
NOTE:
the library information are not affected at all.
Modify Index
A Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
6 Find the point where you want the deletion to begin, then press
ENTER with the arrow on “IN”. The edit-in time is fixed and the
elapsed playing time starts counting again.
B Perform steps 3 to 8 of “Modify Index” (੬ pg. 40).
Modify Program Title
A Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
B Press rt w e to select one program you want to modify, then
press t.
C Perform steps 2 to 7 of “Modify Program Name” (੬ pg. 41).
7 Find the point where you want the deletion to end, then press
ENTER with the arrow on “OUT”. The edit-out time is fixed.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out
points.
8 Press w e to select “PREVIEW”, then press ENTER to preview
part.
Modify Category
A Perform steps 1 to 3 of “Create Play List” (੬ pg. 42) before
continuing.
B Press rt w e to select one program you want to modify, then
press t.
9 Press w e to select “EXECUTE”, then press ENTER. The
selected scene is deleted.
To modify the points
A Press w e to select “CLEAR”, then press ENTER.
B Repeat steps 5 – 9.
C Perform steps 2 to 6 of “Modify Category” (੬ pg. 41).
10Press w e to select “YES”, then press ENTER. The selected
scene is deleted.
● To cancel the deletion, press w e to select “NO”, then press ENTER.
To modify the points
A Press w e to select “CLEAR”, then press ENTER.
B Press r to select “IN”, then repeat steps 4 – 10.
11Press NAVIGATION to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the scene you
intend to edit, and the scene which is actually edited.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
44
Register Disc
Edit Library Information
1 Load a disc you want to register.
2 Press NAVIGATION. The Library Database DVD Navi screen
appears.
3 Press rt w e to select “LIBRARY”, then press ENTER.
4 Press w e to select “REGISTER”, then press ENTER.
Program information can be registered in the unit’s memory for up
to 1,300 programs. It is helpful when finding out on which disc the
desired program is recorded.
5 Press w e to select “REGISTER”, then press ENTER to confirm
the registration.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
6 Press NAVIGATION to return to the normal screen.
NOTES:
● It is not possible to register discs formatted on devices other than
JVC’s DVD recorders.
● It is not possible to register discs recorded on devices other than
JVC’s DVD recorders.
● It is not possible to register discs when “SAVE AS LIBRARY” is set to
“OFF”. (੬ pg. 59)
1
4
7
2
5
8
0
3
6
9
Delete Information
NAVIGATION
ENTER
rtw e
1 Press NAVIGATION. The Library Database DVD Navi screen
appears.
2 Press rt w e to select “LIBRARY”, then press ENTER.
3 Press rt w e to select the appropriate sort button to sort the
information, then press ENTER.
4 Press w e to select a program you want to delete, then
press t.
5 Press rt w e to select “DELETE”, then press ENTER.
6 Press w e to select “DELETE”, then press ENTER to confirm
the deletion.
Scan For Program From Library
7 Press NAVIGATION to return to the normal screen.
1 Press NAVIGATION. The Library Database DVD Navi screen
appears.
2 Press rt w e to select “LIBRARY”, then press ENTER.
3 Press w e to select the
appropriate sort button to sort the
information, then press ENTER.
“DISC No.” : Sort by disc number
“CATEGORY” : Sort by category
“DATE” : Sort by date
“NAME” : Sort by name
● The sorting order can be switched
between ascending order and
descending order by pressing the sort buttons.
4 Press w e to select the desired program, then press ENTER.
● Playback begins automatically after the selected program is located.
When the disc that contains the selected program is not
loaded
A screen prompting you to load the designated disc appears. Place
the disc whose number is displayed on the screen after pressing
ENTER to close the prompt screen. Then perform steps 1 to 4.
NOTE:
If a disc registered in the library is recorded or modified on DVD units
from other manufacturers, it may become impossible to operate
properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION (DVD DECK ONLY)
EN
45
4 Press w e to select the desired
group, then press ENTER.
Playback With MP3/JPEG Navigation
For MP3 Playback
● The tracks in the selected group
appear.
For JPEG Playback
● The images in the selected group
appear.
This unit can play back discs that MP3 sound files and JPEG
image files taken with digital still cameras or other devices are
recorded.
The MP3/JPEG Navigation enables you to search and select the
desired files recorded on CD-R/RW or CD-ROM discs very easily.
5 Press rt w e to select the
desired item, then press ENTER.
The unit starts playback from the
selected item.
● The unit stops when all items in
the selected group are played
back.
The following screen appears as the MP3/JPEG Navigation screen
when you press NAVIGATION. You can move the arrow to select
the desired position on the screen by pressing rt w e on the
remote control.
NOTES:
● If you press SELECT (4) instead
of ENTER in step 4, the unit starts playback from the first file of the
group.
● JPEG files are played back as a slide show at the set intervals.
(੬ pg. 31)
● If a file name includes any 2-byte character, the unit may not show
the file name correctly.
screen that shows the group(s).
from the order shown on your PC.
Program Playback
1 Perform steps 1 to 4 of “Locating The Desired Group And
Tracks” in the left column before continuing.
2 Press rt w e to select the desired item, then press MEMO in
the desired order.
● The order number appears on the left of the track name.
● Repeat this step as necessary.
CANCEL.
● Pressing CLEAR (8) clears all the order numbers.
A Name of the inserted disc.
B Sort buttons (“MP3”⁄ “JPEG”)
C Selected group number/total number of groups on the disc
D Group name
E Return button (“RETURN”)
F Group name/Created date
G File type indicator
3 Press 4 to start playback.
● To quit the Program Playback, press 8.
NOTES:
● It is not possible to select tracks and images simultaneously.
● It is not possible to select tracks or images in other groups.
:
MP3
On completion of the playback of all the items
A Perform steps 1 to 4 of “Locating The Desired Group And
Tracks” in the left column.
B Press CLEAR (8).
● The order numbers are reset and cleared.
C Press NAVIGATION to complete the procedure.
: JPEG
H Selected file
I Selected file number/total number of files in the group that
contains the selected file
J Program number/file name
Locating The Desired Group And Tracks
1 Load a disc.
2 Press NAVIGATION. The MP3/JPEG Navigation screen
appears.
3 For MP3 Playback
Press w e to select “MP3”. Only groups which contain MP3 files
appear.
For JPEG Playback
Press w e to select “JPEG”. Only groups which contain JPEG files
appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
46
6 Load a cassette you want to dub on the VCR deck, and a
recordable disc on the DVD deck.
Tape Dubbing (From VCR To DVD)
7 Press VCR/DVD repeatedly so that the DVD lamp lights up on
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
the unit.
8 Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
9 Press VCR]DVD to select the dubbing direction.The dubbing
(DUBB.) lamp lights up on the unit.
10Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● When dubbing a tape-end recorded VHS tape, set the input of this
unit to a no signal input before dubbing.
VCR/DVD REC MODE
VCR ] DVD
● If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
● After dubbing is completed, the VCR deck rewinds the tape
automatically. Press VCR]DVD to turn off the dubbing (DUBB.)
lamp.
DUBB. Lamp
● To stop dubbing, press 8.
DUBB.
8
Dubbing An Entire Cassette with Just Dubbing
When using the Just Dubbing function, the unit automatically fast-
calculate the total recording time. The unit then automatically sets
the appropriate recording mode depending on the total recording
time and the available disc space.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2 Perform steps 2 – 3 of “Dubbing An Entire Cassette” in the left
column before continuing.
3 Press rt to select “FULL DISC”, then press ENTER to select
8
“ON”.
REC MODE
4 Press SET UP to complete the setting.
5 Load a cassette you want to dub on the VCR deck, and a
recordable disc on the DVD deck.
6 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
NOTES:
7 Press VCR]DVD to select the dubbing direction. The dubbing
● The superimposed indication during the operation or dubbing is not
recorded.
(DUBB.) lamp lights up on the unit
8 Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● When dubbing a tape-end recorded VHS tape, set the input of this
unit to a no signal input before dubbing.
● It is not possible to dub a tape with a copy protection signal.
automatically.
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
● If the index code is found on a tape, a single title is created. While
creating a title, the dubbing stops and then starts again.
● When dubbing can not be performed properly, set “BLUE BACK” to
“OFF”. (੬ pg. 61)
● After dubbing is completed, the VCR deck rewinds the tape
automatically. Press VCR]DVD to turn off the dubbing (DUBB.)
lamp.
● To stop dubbing, press 8.
Auto Finalizing
When dubbing to a DVD-R/RW (Video mode) disc, you can
select whether to finalize the disc automatically after dubbing
has been completed.
To automatically finalize the disc after dubbing:
A Perform steps 1 – 3 of “Dubbing An Entire Cassette” in the
left column before continuing.
B Press rt to select “AUTO FINALIZE”, then press ENTER to
select “ON”.
Dubbing An Entire Cassette
1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press rt to select “COPY SET”,
MAIN MENU
then press ENTER.
COPY SET
FUNCTION SET
NOTE:
It is possible to set the operation method of a DVD-R/RW (Video
mode) disc when finalizing the disc. Each time the finalized disc is
played back, it will be played back in accordance to the setting you
have selected during finalization. For details, refer to “Finalize A
DVD-R/RW Disc” (੬ pg. 63).
PRESS (
,
), THEN (OK)
(SET UP) TO END
4 Press rt to select “FULL DISC”,
then press ENTER to select “OFF”.
● Pressing ENTER toggles the setting
between on and off.
COPY SET
COPY MODE
FULL DISC
AUTO FINALIZE
FULL COPY
OFF
OFF
5 Press SET UP to complete the
setting.
(
,
) THEN (ENTER)
(SET UP) TO END
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
47
1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
Manual Dubbing (From VCR To DVD)
Dubbing A Part Of A Cassette
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
2 Press SET UP to access the Main Menu screen.
3 Press rt to select “COPY SET”,
MAIN MENU
then press ENTER.
COPY SET
FUNCTION SET
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
PRESS (
,
), THEN (OK)
(SET UP) TO END
4 Press rt to select “COPY MODE”,
then press ENTER to select “FULL
COPY” or “1 PROG.”.
● Pressing ENTER toggles the setting
between “FULL COPY” and “1 PROG.”.
COPY SET
REC
VCR ]
VCR/DVD MODE
DUBB.
DVD
COPY MODE
FULL DISC
AUTO FINALIZE
FULL COPY
OFF
OFF
5 Press SET UP to complete the
(
,
) THEN (ENTER)
setting.
(SET UP) TO END
● When “1 PROG.” is selected, recording
will stop when an index code or unrecorded portion is detected.
6 Load a cassette you want to dub on the VCR deck, and a
597
DUBB. Lamp
83
U
recordable disc on the DVD deck.
7 Press VCR]DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
8 Locate the point from where you want to start dubbing, then
8, 9
9 Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
4
5
9
3
8
C Press 7 and 9 simultaneously so that the DVD deck enters the
Record Pause mode.
REC MODE
7
10Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● When dubbing a tape-end recorded VHS tape, set the input of this
unit to a no signal input before dubbing.
● To stop dubbing, press 8.
● Upon completing dubbing, dubbing ends automatically even without
pressing 8. Press VCR]DVD to turn off the dubbing (DUBB.)
lamp.
NOTES:
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing is not
recorded.
● It is not possible to dub a tape with a copy protection signal.
● If the recording capacity of disc become full, the tape stops
automatically.
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
● When dubbing can not be performed properly, set “BLUE BACK” to
“OFF”. (੬ pg. 61)
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
48
1 Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
Disc Dubbing (From DVD To VCR)
Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3 Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
4 Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
5 Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
VCR/DVD
VCR } DVD
● After dubbing is completed, the VCR deck rewinds the tape
automatically. Press VCR}DVD to turn off the dubbing (DUBB.)
lamp.
● To stop dubbing, press 8.
NOTES:
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
“SUPERIMPOSE” to “OFF” before dubbing. (੬ pg. 59)
● When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
● It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform “Manual Dubbing (From DVD To VCR)”
(੬ pg. 49).
DUBB. Lamp
8
DUBB.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
8
REC MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
49
1 Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
Manual Dubbing (From DVD To VCR)
Dubbing A Part Of A Disc
You can dub the selected scenes on a DVD disc to the tape,
starting and stopping wherever you wish.
2 Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
3 Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
8, 9
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
4 Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
REC
VCR/DVD MODE DUBB.
VCR } DVD
B Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
5 Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
6 Press 8 to stop recording on the VCR deck. Then press VCR/
DVD, and press 8 to stop playback on the DVD deck.
● Press VCR}DVD to turn off the dubbing (DUBB.) lamp.
597
DUBB. Lamp
83
U
NOTES:
VCR/DVD
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
● If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. (੬ pg. 59)
● When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
1
4
7
2
5
8
0
3
6
9
PROGRESSIVE SCAN
● When the progressive mode is set, the dubbing (DUBB.) lamp does
not light up on the front display panel. Press PROGRESSIVE SCAN
so that video output indicator ( ) lights off on the front display panel.
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
4
5
9
3
8
REC MODE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
50
1 Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
Program Dubbing (From DVD to VCR)
Dubbing The Desired Programs On A Disc
You can select and dub your desired programs on a DVD disc to
the tape.
2 Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
3 Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Press NAVIGATION to access the Library Database DVD Navi
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
screen.
C Press rt w e to select “ORIGINAL”, then press ENTER.
D Press w e to select the desired program, then press MEMO.
● Select the programs in the order that you want them to be dub. The
numbers of the playback order appear on the index. You can select
up to 30 programs.
REC
VCR/DVD MODE DUBB.
VCR } DVD
● If you have specified a wrong selection, press MEMO. The number
disappears.
● When you want to clear all the numbers, press CLEAR (8).
then press 9 to pause playback.
5 Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
9
DUBB. Lamp
7
U
B Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
VCR/DVD
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
1
4
7
2
5
8
0
3
6
9
6 Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● Playback on the DVD deck and recording on the VCR deck starts at
the same time.
MEMO
NAVIGATION
ENTER
rtw e
● When all the selected programs have been dubbed, playback on the
DVD deck and recording on the VCR deck stops automatically at the
same time. Press VCR}DVD to turn off the dubbing (DUBB.)
lamp.
4
9
7
CLEAR (8)
NOTES:
REC MODE
clear the memory, access the Library Database DVD Navi screen and
press CLEAR (8).
● When locating the point where you want dubbing to start, be sure to
press 4 then press 9. There should be at least a one-second
interval when pressing these two buttons.
● If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. (੬ pg. 59)
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
51
1 Connect a DV camcorder or DV equipment to the [DV IN]
connector on the unit’s front panel.
DV Dubbing (DVD Deck Only)
2 Load a DVD-RAM/RW/R disc on the unit.
You can dub programs from a DV camcorder or DV equipment
connected to the unit with a DV cable. The unit’s remote control
allows you the limited control of the connected DV camcorder or
DV equipment functions during dubbing.
3 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
remote control to set the input to “DV”.
● The “DV DUBBING” controller appears on the TV screen.
NOTES:
● If “
” does not appear on the “DV DUBBING” controller, make
● Use the DV cable VC-VDV 204U for connection.
● When you connect a PC to the [DV IN] connector, we do not
assure the normal operation of this unit.
sure the DV equipment is connected correctly.
5 Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
6 Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control: 4, 5, 3, 8, 9
Your unit
● To play back in slow speed (1/10 of the normal speed), press 9 to
pause playback, then press 3 or 5.
● To play back frame-by-frame, press 9 to pause playback, then press
9 repeatedly. Each press of 9 advances a frame.
● To change the playback direction, press 3 or 5.
To [DV IN]
7 Press w e to select
, then press ENTER.
8 Press rt to select the desired
sound track, then press ENTER.
AUDIO 1: Select this to record the
original stereo sound played
back on the connected DV
equipment.
AUDIO 2: Select this to record the
dubbed stereo sound played
back on the connected DV
equipment.
DV Camcorder
DV cable
(VC-VDV 204U)
(not supplied)
MIX: Select this to record the sound of both “AUDIO 1” and
“AUDIO 2”.
DV connector
● Note that this selection is not available when the source program is
recorded in 16BIT (48 kHz) mode.
DV equipment
9 Press w e to select
, then press ENTER. The
dubbing starts.
● Playback on the external DV equipment and recording on the unit
should start simultaneously.
● When the playback from the beginning is not possible, the “DV
DUBBING” controller cannot be used. Perform dubbing without using
the “DV DUBBING” controller. (੬ below)
● To pause dubbing, press w e to select
, then press
ENTER. Both the unit and the external DV equipment pause dubbing.
Pressing 9 on the unit also works the same way.
● To clear the “DV DUBBING” controller from the TV screen, press ON
SCREEN.
10Press 8 on the remote control to stop dubbing.
● Both the unit and the external DV equipment stop dubbing.
NOTES:
● Dubbing copyright guarded programs is not possible.
● Original DV information such as the recording date and time are not
recorded.
● The superimposed indication during the operation or dubbing is not
recorded.
● It is not possible to perform dubbing when the dubbing (DUBB.)
lamp lights up on the unit. Press VCR]DVD so that the dubbing
Performing dubbing without using the “DV DUBBING”
controller
A Press INPUT SELECT +/– on the unit or INPUT +/– on the
remote control to set the input to “DV”.
B Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
C Start playback on the external DV equipment slightly before the
actual point from where you wish to start dubbing.
D Press 7 on the unit to start recording. Or while holding 7, press
4 on the remote control. The dubbing starts.
E When the dubbing ends, press 8 on the unit, then stop
playback on the external DV equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
52
Slide the TV/CABLE/DBS/DVD switch to DVD.
Edit From A Camcorder
1 Make connections.
You can use a camcorder as the source player and your unit as the
recording deck.
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder’s Audio/Video output connector to the
unit’s [AUDIO IN F-1] and [VIDEO IN F-1] input connectors on the
front panel.
A If the camcorder has no S-VIDEO output connector:
● When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO L] input connector on your unit.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder’s Audio/Video output and S-Video
output connectors to the unit’s [AUDIO IN F-1] and [S-VIDEO IN
F-1] connectors on the front panel.
2 Press VCR/DVD repeatedly to select the recording deck.
Recorder
To [AUDIO IN F-1]
To
[VIDEO
IN F-1]
3 Press INPUT SELECT +/– on the unit or INPUT +/– on the
remote control to select “F-1”.
● Set “FRONT AUX F-1” to “VIDEO” for the [VIDEO IN F-1] connector,
connector being used. (੬ pg. 59) This setting is also applied to the
VCR deck.
Audio/Video cable
(not supplied)
4 For VCR deck only
Set “PICTURE CONTROL” to the appropriate mode. (੬ pg. 61)
5 Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
6 Start playback on the camcorder slightly before the actual point
from where you wish to start dubbing.
For VCR deck only
Press 7 and 9 simultaneously to set to record pause mode.
To Audio/Video
output
Player
7 Press 7 on the unit to start recording. Or while holding 7, press
4 on the remote control. The dubbing starts.
For VCR deck only
B If the camcorder has an S-VIDEO output connector:
After about 10 seconds, press 4 to start recording.
NOTES:
● All necessary cables can be obtained from your dealer.
● Refer to the camcorder’s instruction manual for operating procedure.
● The quality of dubbed picture becomes poorer than that of the
original.
● When you select “EDIT” to dub tapes in step 4, be sure to select
“AUTO” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”)
after you finish dubbing the tapes.
Recorder
To [AUDIO IN F-1]
To [S-VIDEO
IN F-1]
Audio/Video cable (not supplied)
To Audio/Video
output
S-Video cable
(supplied)
Player
To S-Video output
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
53
Slide the TV/CABLE/DBS/DVD switch to DVD.
Edit To Or From Another Recorder
1 Make connections.
You can use your unit as the source player or as the recording
deck.
When using this unit as the recording deck
A If the another recorder has no S-VIDEO connector, connect the
unit’s [AUDIO/VIDEO INPUT] connectors to the audio/video output
connectors on another recorder.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
B If the another recorder has S-VIDEO connector, connect the
[AUDIO INPUT] and [S-VIDEO INPUT] connectors to the audio
and S-video output connectors on another recorder.
● If connecting a unit with an S-VIDEO connector, it is recommended to
use the supplied S-Video cable to minimize picture degradation while
editing.
Your unit
Recorder
TV receiver
3 Press INPUT SELECT +/– on the unit or INPUT +/– or AUX on
the remote control to select “L-1” when using this unit as the
recording deck.
● Set “REAR AUX L-1” to “VIDEO” for the [VIDEO INPUT] connector,
connector being used. (੬ pg. 59) This setting is also applied to the
VCR deck.
4 For VCR deck only
Set “PICTURE CONTROL” to the appropriate mode. (੬ pg. 61)
5 Press REC MODE repeatedly to set the recording mode.
(੬ pg. 36)
6 Engage the Play mode of the source player.
For VCR deck only
Another recorder
Press 7 and 9 simultaneously to set to record pause mode.
Player
7 Engage the Record mode of the recording deck.
For VCR deck only
After about 10 seconds, press 4 to start recording.
source player.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (੬ pg. 59)
● When you select “EDIT” to dub tapes in step 4, be sure to select
“AUTO” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”)
after you finish dubbing the tapes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
54
1 Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
Digital Audio Dubbing
2 Place a disc on the unit and load an MD on the connected digital
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
audio device.
3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
4 Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
wish to start dubbing.
5 Press 9 to pause playback.
Example: Dubbing to an MD
6 Select the input mode on the connected digital audio device.
7 Press 4 to start playback on the unit.
Recorder
8 Start recording on the digital audio device.
9 Stop recording on the digital audio device. Then press 8 to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.
Digital audio device
(MD deck, etc.)
Optical cable
(not supplied)
Coaxial cable
(not supplied)
To [DIGITAL AUDIO
OUT (OPTICAL)]
To [DIGITAL AUDIO OUT
(COAXIAL)]
Player
Rear of unit
Note for connection:
Remove the protection cap from the cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
EN
55
Remote Control Functions
Remote control 1/2/3/4 Code Switching
1
4
7
2
5
8
0
3
6
9
1
0 – 9
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of four codes
(1, 2, 3 or 4). The remote control is preset to send 3 code signals
because your unit is initially set to respond to 3 code signals. You
can easily modify your unit to respond to 1, 2 or 4 code signals.
ENTER
SET UP
Slide the TV/CABLE/DBS/DVD switch to DVD.
TV VOL.
TV/VCR
TV CH +/–
TV Multi-Brand Remote Control
1
4
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
1
4
7
2
5
8
0
3
6
9
● Turn off the TV using its remote control.
● Slide the TV/CABLE/DBS/DVD switch to TV.
1 – 4
IMPORTANT:
Although the supplied remote control unit is compatible with JVC
televisions, as well as many other models, it may not work with your TV,
ENTER
SET UP
● Keep pressing SET UP down during step 1.
1 Enter your TV’s brand code using the number keys, then press
8
ENTER.
2 Press 1 on the unit’s remote control to turn on the TV and try
operations (੬ step 3).
● Once you have set the remote control to operate the TV, you do not
have to repeat this step until you replace your remote control’s
batteries.
● Some brands of TVs have more than one code. If the TV does not
function with one code, try entering another.
● Keep pressing SET UP down during step 1.
3 Press the corresponding button to operate the TV: 1, TV/VCR,
1 Press the number key “1” for 1, “2” for 2, “3” for 3 or “4” for 4
TV CH +/–, TV VOL.,
(TV Muting), number keys.
to change the remote control code, then press ENTER.
● For some brands of TVs, you must press ENTER after having
pressed the number keys.
2 Press 1 on the unit to turn off the unit.
3 Press 4 on the unit for over 5 seconds while the unit is turned
BRAND NAME
CODE
off. The current code appears on the front display panel.
4 Press 8 on the remote control to change the unit’s code. The
new code currently set on the remote control blinks on the front
display panel for approximately 5 seconds, and is applied to the
unit.
JVC
01, 03
10
02
03
04, 11
05
HITACHI
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
06
07
SAMSUNG
SANYO
SEARS
12
13
13
TOSHIBA
ZENITH
08
09
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
EN
56
Cable Box Or DBS Receiver Multi-Brand Remote
Control
box or DBS (Direct Broadcast Satellite) receiver set. In addition to
JVC cable boxes or DBS receivers, other manufacturer’s cable
boxes or DBS receiver can also be controlled.
CABLE BOX BRAND
CODE
ARCHER
01, 05, 17
01, 17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
02
01, 17
15, 16, 17, 21, 25
15
01, 04, 06, 11, 12, 15, 28
10, 18, 23
15
01, 04, 06, 11, 12, 15, 28
02
07
13, 14
15, 16, 17, 21, 25
13, 14
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
● Keep pressing SET UP down during step 1.
1 Enter your cable box or DBS receiver’s brand code using the
JASCO
number keys, then press ENTER.
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
2 Press 1 on the unit’s remote control to turn on the cable box or
DBS receiver and try operations (੬ step 3).
● Once you have set the remote control to operate the cable box or
DBS receiver, you do not have to repeat this step until you replace
your remote control’s batteries.
● Some brands of cable box or DBS receiver have more than one code.
If the cable box or DBS receiver does not function with one code, try
entering another.
10, 18, 23
01, 16, 17
05, 16, 24
02
3 Press the corresponding button to operate the cable box or DBS
receiver: 1, TV CH +/–, number keys.
07
● For some brands of cable box, you must press ENTER after having
pressed the number keys.
SL MARX
05, 16, 17, 24, 25
13, 14
05, 15, 16, 17, 21, 24, 25
05, 16, 24
01, 04, 16
01, 17
SPRUCER
STARGATE
TELEVIEW
TOCOM
● The number keys may not function with some cable boxes.
IMPORTANT:
It may not work with your cable box, or in some instances, may have
limited function capability.
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
16, 17, 25
03, 09, 22
03, 09, 22
NOTES:
● It’s not possible to operate a cable box or DBS receiver that is not
equipped with a receiving window.
● It’s not possible to set the remote control for both your cable box and
a DBS receiver at the same time. You can only set the remote control
to operate one of these units at a time.
DBS RECEIVER BRAND
CODE
JVC (DISH Network)
ECHOSTAR (DISH Network)
SONY (DSS)
51
51
41
40
RCA (DSS)
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTIONS
EN
57
1 Connect the unit and a Dolby Digital decoder or an amplifier
optional coaxial cable.
Connecting To A Dolby Digital Decoder
Or An Amplifier With Built-in DTS
NOTES:
● For Dolby Digital sound, set “DIGITAL AUDIO OUT” to “DOLBY
DIGITAL/PCM”. (੬ pg. 58)
These instructions enable you to connect your unit to a Dolby
Digital decoder or an amplifier with built-in DTS.
● For DTS sound, set “DIGITAL AUDIO OUT” to “STREAM/PCM”.
(੬ pg. 58)
CAUTIONS:
● This unit has a dynamic range of more than 110 dB with regards to its
Hi-Fi audio capability. It is recommended that you check the
maximum level if you are going to listen to the Hi-Fi audio signals
through a stereo amplifier. A sudden surge in the input level to the
speakers may damage them.
● Some speakers and televisions are specially shielded to prevent
television interference. If both are of the non-shielded type, do not
place the speakers adjacent to the TV set as this can adversely affect
the playback picture.
Dolby Digital Decoder or
amplifier with built-in DTS
To DIGITAL AUDIO input
Optical cable
(not supplied)
Coaxial cable
(not supplied)
To [DIGITAL AUDIO OUT (OPTICAL)]
To [DIGITAL AUDIO
OUT (COAXIAL)]
Rear of unit
Note for connection:
Remove the protection cap from the cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
58
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
Mode Set (DVD Deck)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
8 DIGITAL AUDIO OUT — DOLBY DIGITAL/PCM / STREAM/PCM
/ PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
DOLBY DIGITAL/PCM: Select this when you connect the digital
input connector of a Dolby Digital decoder or an amplifier with a
built-in Dolby Digital decoder.
STREAM/PCM: Select this when you connect the digital input
connector of an amplifier with a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
PCM ONLY: Select this when you connect the linear PCM digital
input of other audio equipment (amplifier, MD or DAT deck, etc.).
rtw e
ENTER
SET UP
8 ANALOG AUDIO OUT — STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO: Select this when listening to conventional two-channel
stereo audio with the unit’s [AUDIO OUTPUT] connectors
connected to a stereo amplifier/receiver or TV set, or in case you
want to record the audio from a DVD VIDEO disc to a Mini Disc,
etc.
surround audio with the unit’s [AUDIO OUTPUT] connectors
connected to an amplifier/receiver with a built-in surround
decoder or a surround decoder.
Various modes of this unit are categorized into menus nested in 2
modes, find the desired mode in the menu (for details on each
menu, see pages 58 through 59), then follow the procedure below.
8 D. RANGE CONTROL — NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
DVD SET UP
UTILITY (੬ pg. 32, 62, 63, 64)
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL: Normally select this setting to activate this function.
WIDE RANGE: Select this to deactivate this function when you
enjoy wide dynamic range program.
VIDEO IN/OUT (੬ pg. 19, 59)
RECORDING SET (੬ pg. 59)
DISPLAY SET (੬ pg. 59)
OTHERS (੬ pg. 59)
FUNCTION SET UP
INITIAL SET UP
CLOCK SET (੬ pg. 17)
speaker(s).
● The procedure below shows how to set the desired option of the “DV
AUTO CHAPTER” mode as an example.
NOTES:
● This function takes no effect on programs other than that recorded in
Dolby Digital format.
● This function does not work when Simulated Surround Effect is
activated. (੬ pg. 30)
● The effect of “NORMAL” and “WIDE RANGE” may not be different
depending on discs.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press w e to select “FUNCTION SET UP”, then press ENTER.
4 Press w e to select
“RECORDING SET”, then press
ENTER.
8 OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.
5 Press rt to select “DV AUTO
STANDARD: Normally select this setting.
LOW: The output level of analog audio is lowered.
CHAPTER”, then press ENTER.
6 Press rt to select the desired
option, then press ENTER.
7 Press SET UP to complete the
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
59
VIDEO IN/OUT
DISPLAY SET
8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to “Monitor Set (DVD Deck Only)” (੬ pg. 19).
8 SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen.
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
8 FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO: To use the [VIDEO IN F-1] connector on the front panel.
S-VIDEO: To use the [S-VIDEO IN F-1] input connector on the front
panel.
NOTES:
● Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
● When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (੬ pg. 53)
● When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
NOTE:
This setting is also applied to the VCR deck.
8 REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
8 GRAY BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all gray
when there is no signal input from the external input.
VIDEO: To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO: To use the [S-VIDEO INPUT] connector on the rear
panel.
NOTE:
When you want to receive an unstable external input with poor signals,
set this function to “OFF”.
NOTE:
This setting is also applied to the VCR deck.
8 DIMMER — BRIGHT / DIM
RECORDING SET
You can change the brightness of the front display panel.
BRIGHT: Normally select this.
8 SAVE AS LIBRARY — OFF / ON
DIM: To dim the front display panel.
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Edit Library
Information” (੬ pg. 44).
8 POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
8 XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a program in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
NOTES:
● During Power Save mode, it is not possible to engage the Tray Lock
function. (੬ pg. 65)
● It takes some time for the unit to complete initialization after you turn
on unit power, with “WAKE UP” blinking on the front display panel.
the unit may be activated even if the unit is turned off.
8 DV AUTO CHAPTER — OFF / ON
When this function is set to “ON”, you can create chapters (marks)
when dubbing via the DV input terminal connecting the external DV
camcorder.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on screen messages in 3
different languages.
OTHERS
8 RESUME — OFF / ON / DISC RESUME
When this function is set to “ON” or “DISC RESUME”, you can use
the resume function. (੬ pg. 22)
OFF: You cannot use the resume function.
ON: You can start playback from the resume point of the placed
disc.
DISC RESUME: The unit retains a memory of the resume points of
the last 30 discs played back, even though they have been
ejected.
NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already
finalized DVD-R/DVD-RW (video mode) discs. For other types of discs,
the function under “ON” setting will be applied even if “RESUME” is set
to “DISC RESUME”.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
60
Mode Set (VCR Deck)
COPY SET
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
8 COPY MODE — FULL COPY / 1 PROG.
This function allows you to select the position to stop dubbing
when performing manual dubbing from the VCR deck to DVD deck.
(੬ pg. 47)
FULL COPY: Dubbing stops at the end of tape.
1 PROG.: Dubbing stops when an index code or unrecorded
portion is detected.
VCR/DVD
1
4
7
2
5
8
0
3
6
9
8 FULL DISC — ON / OFF
You can activate Just Dubbing function when dubbing an entire
cassette from the VCR deck to DVD deck by setting this function to
“ON”. The unit automatically calculates the total recording time of
the cassette and sets the appropriate recording mode depending
on the calculated time and the available disc space. (੬ pg. 46)
rtw e
ENTER
SET UP
8 AUTO FINALIZE — ON / OFF
When this function is set to “ON”, the unit will automatically finalize
the disc when dubbing has been completed. (੬ pg. 46)
8 S-VHS ET — ON / OFF
You can record in SP mode on VHS cassettes with S-VHS picture
quality. You can play back a tape recorded using the S-VHS ET
function on most of the S-VHS recorders and VHS recorders
equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice
some recorders are not compatible with the S-VHS ET function.)
When this function is set to “ON”, the S-VHS indicator lights up on
the front display panel.
You can change various mode settings on the Function Set screen.
To change the settings of these modes, find the desired mode in
the menu (for details on each menu, see pages 60 through 61),
then follow the procedure below.
1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
NOTES:
2 Press SET UP to access the Main Menu screen.
● You can activate the S-VHS ET function only before you start
recording on a VHS cassette.
3 Press rt to select “COPY SET” or
MAIN MENU
“FUNCTION SET”, then press ENTER.
COPY SET
● Before recording, make sure that “VIDEO CALIBRATION” is set to
“ON”. (੬ below)
● You cannot activate the S-VHS ET function:
FUNCTION SET
— while recording is in progress.
— while Video Calibration (੬ pg. 38) is in progress.
● The S-VHS ET function does not work with S-VHS cassettes.
● To keep the highest quality recording and playback pictures over a
long period of time, S-VHS recording on S-VHS cassettes is
recommended.
● Use of high grade tapes is recommended for S-VHS ET recordings.
function is used. Check the recording quality before you start
important recordings.
● While playing back a tape recorded using the S-VHS ET function on
some recorders, noise may appear. (If playback picture becomes
blurred or interrupted, use a cleaning cassette.)
● In the variable speed search, still, slow-motion or frame-by-frame
playback modes (੬ pg. 34, “Playback Features”), noise may appear.
If these modes are performed frequently on a tape recorded using
the S-VHS ET function, the tape may be damaged and the picture
may be deteriorated.
PRESS (
,
), THEN (OK)
(SET UP) TO END
4 Press rt to select the item you want to change, then press
ENTER or e to select the desired mode.
FUNCTION
COPY SET
S-VHS ET
OFF
ON
COPY MODE
FULL DISC
FULL COPY
OFF
VIDEO CALIBRATION
PICTURE CONTROL
VIDEO STABILIZER
SUPERIMPOSE
DIGITAL R3
AUTO
OFF
AUTO
ON
AUTO FINALIZE
OFF
OR
NEXT PAGE
(
,
) THEN (ENTER)
(
,
) THEN (ENTER)
(SET UP) TO END
(SET UP) TO END
PREVIOUS PAGE
BLUE BACK
S-VHS MODE
RETURN POINT
REC SAFETY
OFF
ON
TAPE END
ON
8 VIDEO CALIBRATION — ON / OFF
When this function is set to “ON”, this unit checks the condition of
the tape in use during playback and recording, and compensates
to provide the highest-possible pictures. This takes place whenever
you play back a tape or start recording after inserting a tape.
(੬ pg. 38)
(
,
) THEN (ENTER)
(SET UP) TO END
5 Press SET UP to complete the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
61
8 PICTURE CONTROL — AUTO / EDIT / SOFT / SHARP
This feature helps you to adjust the playback picture quality
according to your preference. Normally select “AUTO”.
AUTO: Picture quality is adjusted automatically.
EDIT: Minimizes picture degradation during editing (recording and
playback).
8 BLUE BACK — ON / OFF
When this function is set to “ON”, the TV screen becomes all blue
when there is no signal input from the external input.
NOTE:
When you want to receive an unstable external input with poor signals,
set this function to “OFF”.
SOFT: Reduces image coarseness when viewing overplayed tapes
containing a lot of noise.
8 S-VHS MODE — ON / OFF
SHARP: Clearer, sharper-edged picture when viewing images with
lots of flat, same-colored surfaces such as cartoons.
To record in S-VHS:
NOTES:
Set “S-VHS MODE” to “ON”. Then, insert a cassette marked
“S-VHS”. The S-VHS indicator lights up on the front display panel.
The S-VHS recording mode is selected.
● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will
not change until you select another mode.
● When you select “EDIT” to dub tapes, be sure to select “NORM” after
you finish dubbing the tapes.
● When “VIDEO CALIBRATION” is “OFF”, “PICTURE CONTROL”
switches automatically from “AUTO” to “NORM”.
To record in S-VHS ET on a VHS cassette:
Set “S-VHS ET” to “ON”. (੬ pg. 60) Then, insert a cassette
marked “VHS”. The S-VHS indicator lights up on the front display
panel.
8 VIDEO STABILIZER — ON / OFF
To record in VHS:
Insert a cassette marked “VHS”.
When this function is set to “ON”, you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
Set “S-VHS ET” to “OFF”. (੬ pg. 60)
The VHS recording mode is automatically selected regardless of
the “S-VHS MODE” setting.
NOTES:
To record in VHS on an S-VHS cassette:
● When you finish viewing a tape, be sure to set this function to “OFF”.
● Regardless of the setting, this function has no effect during recording
and during special effects playback.
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up
on the front display panel. Then, set “S-VHS MODE” to “OFF”. The
S-VHS indicator goes off.
● The on-screen display may jitter vertically when this function is set to
“ON”.
● To watch recordings with close-caption, set this function to “OFF”.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the front display panel
regardless of the “S-VHS MODE” setting.
8 SUPERIMPOSE — AUTO / ON / OFF
When this function is set to “AUTO”, various operational indicators
appear on the TV screen.
AUTO: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
ON: Functions in the same way as “AUTO”. However, when “ON” is
selected, the counter display (੬ pg. 14) will always be displayed
during playback.
OFF: To turn off superimposed indications.
NOTES:
● When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting.
● During playback, the operation mode indicators may be disturbed
depending on the type of tape being used.
8 RETURN POINT — TAPE END / REC END
Returning point for Playback or Repeat Play can be set to tape end
or recording end. (This unit considers 1-second unrecorded portion
as the recording end.) When the returning point is reached,
TAPE END: Playback stops at the end of tape.
REC END: Playback stops at the end of the recording.
NOTE:
The setting you have made is kept in memory. Even if this unit is
unplugged or power failure occurs, it will resume every time you turn on
this unit. (੬ pg. 65)
8 DIGITAL R3 — ON / OFF
8 REC SAFETY — ON / OFF
When this function is set to “ON”, the Digital 3R picture system
applies edge correction to the luminance signal to enhance detail.
tab intact. When this function is set to “OFF”, recording can be
done onto a cassette with its record safety tab removed.
NOTES:
● Normally it is recommended to keep “DIGITAL 3R” set to “ON”.
● Depending on the type of tape being used, picture quality may be
better with “DIGITAL 3R” set to “OFF”.
NOTES:
● The setting you have made is kept in memory. Even if this unit is
unplugged or power failure occurs, it will resume every time you turn
on this unit. (੬ pg. 65)
● If you use the unit as the source player for editing, be sure to set
“DIGITAL 3R” to“OFF” before starting.
● When “REC SAFETY” is set to “OFF”, playback does not start
automatically when you insert a cassette with its record safety tab
removed. (੬ pg. 36)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
62
Format A DVD-RAM Disc
Format A Disc (DVD Deck Only)
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press rt w e to select “DVD SET UP”, then press ENTER.
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
4 Press w e to select “UTILITY”,
then press ENTER.
5 Press rt to select “FORMAT”,
then press ENTER. Press w e to
select “YES”, then press ENTER
when “DISC WILL BE
FORMATTED” appears on the TV
screen.
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
● Never turn off the unit or disconnect the mains power cord while
“NOW FORMATTING...” is displayed on the TV screen.
6 Press w e to select “OK”, then
● Turn on the unit.
press ENTER when “DISC FORMATTING WAS SELECTED”
appears on the TV screen.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
screen. Press ENTER to end, then press SET UP to return to the
normal screen.
Format A DVD-RW Disc
VCR/DVD
1
4
7
2
5
8
0
3
6
9
1 Perform steps 2 to 4 of “Format A DVD-RAM Disc” on the above
before continuing.
2 Press rt to select “FORMAT”, then press ENTER. Press w e
to choose “VR MODE” or “VIDEO MODE”, then press ENTER
when “DISC WILL BE FORMATTED” appears on the TV screen.
rtw e
ENTER
SET UP
“VR MODE”:
To be chosen when you want to record, erase, or
edit data on the disc repeatedly.
“VIDEO MODE”: To be chosen when you want to erase all the data
on the disc once played back to record new data,
or play back the disc on other DVD players.
3 Press w e to select “YES”, then press ENTER when “DISC
WILL BE FORMATTED IN VR MODE/VIDEO MODE” appears on
the TV screen.
4 Upon completing formatting, “COMPLETED” appears on the TV
normal screen.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video mode.
● It is impossible to format DVD-R discs.
● All the programs on a disc will be deleted once the disc is formatted
even if they are protected titles. (੬ pg. 41)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
63
Finalize A DVD-R/RW Disc
Finalize A Disc (DVD Deck Only)
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
● Alternatively, you can press FINALIZE to access the “FINALIZE”
setting on the “UTILITY” menu directly. For details, refer to “Direct
Access To “FINALIZE” Setting” (੬ pg. 64).
Finalizing DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalized in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (੬ pg. 41)
3 Press rt w e to select “DVD SET UP”, then press ENTER.
4 Press w e to select “UTILITY”, then press ENTER.
5 To change the operation method of a DVD-R/RW (Video mode)
disc, press rt to select “DISC TYPE”, then press ENTER. Press
rt to select the desired option, then press ENTER.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Load a DVD-R/RW disc to finalize.
6 Press rt to select
“FINALIZE”, then press ENTER.
Press w e to select “YES”, then
press ENTER when “DISC WILL
BE FINALIZED” appears on the
TV screen.
VCR/DVD
7 Press w e to select “OK”, then
WILL MAKE DISC READ-ONLY”
appears on the TV screen.
1
4
7
2
5
8
0
3
6
9
FINALIZE
8 Press SET UP to return to the normal screen.
● Menu screen is cleared.
rtw e
ENTER
SET UP
● You can select whether to finalize a disc automatically after dubbing.
For details, refer to “Auto Finalizing” (੬ pg. 46)
● Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. Only display for
library appears.
● Once a DVD-RW (VR mode) disc has been finalized, it can be played
on DVD players compatible with VR mode.
* The boldface settings below indicate the settings at your purchase.
8 DISC TYPE — MANUAL START / MENU STOP / AUTO REPEAT
/ NO MENU
Before finalizing
● It is possible to record on a blank space.
● It is possible to enter a program title. (੬ pg. 41)
● It is possible to delete programs. (੬ pg. 41)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
● It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalized.
You can set the operation method of a DVD-R/RW (Video mode)
disc when finalizing the disc on this unit.
MANUAL START:
When the DVD disc is loaded, the disc will stop after it has been
read. To play back the disc, press 4.
MENU STOP:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. Playback will stop when the
disc menu is displayed.
After finalizing (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded in
discs as DVD VIDEO discs.
● Although DVD-R/RW discs finalized on this unit become playable on
DVD players compatible with DVD-R/RW discs, some discs still may
not play, for which JVC cannot take responsibility.
● Marked points marked before finalizing will be deleted, and programs
will be divided automatically into “chapters” approximately every 5
minutes. (੬ pg. 22)
● Depending on the DVD players and DVD-R/RW discs used, and on
the conditions of recording, it may not be possible to play back the
discs. In this case, play back the discs on this unit.
AUTO REPEAT:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. The disc will be played
repeatedly.
NO MENU:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. All the titles on the disc will
be played back sequentially; playback will stop when the last title
is played.
● Additional recordings become impossible.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
64
Cancel The Finalization Of A DVD-RW Disc
1 Load a DVD-RW disc to cancel the disc finalization, and perform
steps 2 to 4 of “Finalize A DVD-R/RW Disc” (੬ pg. 63) before
continuing.
Direct Access To “FINALIZE” Setting
When you wish to finalize or cancel the finalization of a disc,
besides accessing the “FINALIZE” setting through the SET UP
button, you can also use the FINALIZE button on the remote
“FINALIZE” setting directly after loading the disc.
2 Press rt to select “CANCEL
DISC FINALIZATION”, then press
ENTER.
To finalize a disc
A Load the disc.
B Press DVD so that the DVD lamp lights up on the unit.
appears.
3 Press w e to select “OK”, then
press ENTER when “CANCEL
DISC FINALIZATION” appears on
the TV screen.
to finalize the disc.
4 Press SET UP to return to the
normal screen.
● When the disc finalization is cancelled, the mode in which the disc
was formatted is restored, making the disc recordable. (੬ pg. 7, 62)
To cancel finalization
A Perform steps A to C of “To finalize a disc” above.
● The screen in step 2 of “Cancel The Finalization Of A DVD-RW Disc”
on the left column appears.
B Perform steps 2 to 4 of “Cancel The Finalization Of A DVD-RW
Disc” on the left column to cancel finalization of the disc.
NOTES:
● The direct access (FINALIZE) function works only when in the DVD
deck mode, on the condition that the Main Menu or Library Database
DVD Navi screen is not displayed.
● The direct access (FINALIZE) function will not work in the following
cases, and an operation prohibition mark “ ” appears on the TV
screen.
● During DVD recording or playback.
● Disc is not loaded.
● A playback-only disc is loaded.
● A DVD-RAM or DVD VIDEO disc is loaded.
● Disc reading in progress.
● Disc information acquisition failure when DVD-RAM is loaded.
● When this unit is in the VCR deck mode or when dubbing is in
progress, the direct access (FINALIZE) function will also not work.
However, “ ” will not be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
65
If you connect the unit and TV with Component Video Connection
(੬ pg. 16), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction of
higher-quality images. For details, refer to “GLOSSARY”
(੬ pg. 69).
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
● Turn off the unit.
ATTENTION:
Your TV needs to be compatible with Progressive.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
x 8
To lock tray
While the unit is turned off, press and hold 8, then press x
(EJECT) on the unit. “LOCKED” appears on the front display panel
and the disc tray is locked.
VCR/DVD
To unlock tray
1
4
7
2
5
8
0
3
6
9
While the unit is turned off, press and hold 8, then press x
(EJECT) on the unit. “UNLOCK” appears on the front display
panel.
PROGRESSIVE SCAN
NOTE:
To engage Tray Lock, “POWER SAVE” must be set to “OFF”
(੬ pg. 59). In addition, the Tray Lock function is cancelled when the AC
power plug is disconnected from the AC outlet. It is therefore advisable
to use the Mode Lock function.
Mode Lock
During playback, recording or in stop mode, press and hold F1 on
the remote control for more than 5 seconds. “LOCKED” appears on
the front display panel.
● No buttons will function and playback and recording will not be
interrupted.
7 and 4.
To cancel Mode Lock, press and hold F1 again for more than 5
seconds.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press PROGRESSIVE SCAN for 3 or more seconds.
● Video output indicator ( ) lights on the front display panel if
Progressive scan mode has been established. (੬ pg. 13)
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
NOTES:
● It is also possible to use Mode Lock during Repeat Playback
(੬ pg. 29, 35).
● When the Progressive scan mode is engaged, no video signal is
output from [AUDIO/VIDEO] and S-VIDEO output connectors.
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video material.
● Scan mode cannot be set while menu screen is displayed.
● It is not possible to engage Mode Lock when the Main Menu screen,
Library Database DVD Navi screen or the on-screen display is
displayed.
● During Mode Lock, certain commands of the RS-232C control cannot
be used. Cancel Mode Lock when using the RS-232C control.
● Unlike the Tray Lock function, Mode Lock will not be cancelled even if
the AC power plug is disconnected from the AC outlet. When the AC
power plug is reconnected, “LOCKED” appears on the front display
panel and the unit remains in the power off condition.
You can turn on the unit; however, it is not possible to turn off the unit
thereafter. Only 7 and 4 are functional.
Watch the image on VCR deck in the Progressive scan
mode via component video
A Set the Progressive-compatible TV to the component input
mode.
B Press VCR/DVD repeatedly so that the DVD lamp lights up
on the unit, then press PROGRESSIVE SCAN for 3 or more
seconds so that the Video output indicator ( ) lights on the front
display panel.
C Press VCR/DVD repeatedly so that the VCR lamp lights up
Last Function Memory
kept in the memory. These settings will resume when the unit is
turned on again.
on the unit.
D Press VCR]DVD.
NOTE:
Be sure to engage the DVD deck in stop mode.
● Input selection (auxiliary input; L-1, F-1 or DV)
● Recorder selection (The last selected deck is memorized.)
● Recording mode (੬ pg. 36)
● Mode settings (੬ pg. 58 – 61)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
66
Before requesting service for a problem, use this chart and see if
you can solve the trouble yourself. Small problems are often easily
solved, and this can save you the trouble of sending your unit off
for repair.
Playback (DVD Deck)
The DVD deck can not be operated.
● The DVD deck is not selected.
]Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
Initializing (DVD Deck Only)
Malfunction occurs on the unit.
Images do not appear on the TV screen.
]Press 1 to turn off the unit, press and hold 8, then press 1
for two seconds or more.
● The TV is not set to the AV mode.
● When interlace scanned program is played back, progressive
scan mode is selected.
General
]Press and hold PROGRESSIVE SCAN until
the front display panel.
disappears from
No power is supplied to the unit.
● The AC power plug is disconnected from the AC outlet.
]Connect the AC power plug to the AC outlet securely. (੬ pg. 16)
Playback does not start or stop immediately after playback is
started by pressing
On the front display panel, “NO DISC” appears.
.
]Remove the batteries, wait for 5 minutes or more, then load the
default setting “3”. If you had change the remote control code
prior to replacing the batteries, you need to set the code again.
(੬ pg. 55)
● The setting of the remote control code is inappropriate.
and the remote control. (੬ pg. 55)
]Place the disc on the disc tray with the playback surface facing
downward. (੬ pg. 10)
● A disc not being compatible with the unit is loaded.
]Load a playable disc on the unit. (੬ pg. 7)
● A dirty disc is loaded.
]Clean the disc. (੬ pg. 10)
● Defective disc is loaded.
]Replace the warped or scratched disc with a normal one.
● The batteries are discharged.
]Replace the dead batteries with new ones. The remote control
code will revert back to its default setting “3”. If you had change
the remote control code prior to replacing the batteries, you
need to set the code again. (੬ pg. 55)
“READING” remains on the front display panel and the disc
cannot be ejected.
]You can try the following operation to eject the disc.
Press and hold x (DVD) until the disc is ejected. It may take
approximately 30 seconds.
Dubbing from the external equipment is not possible.
● The source (another video recorder, camcorder) has not been
properly connected.
OR
the unit, once “LOADING” appears on the front display panel
press x (DVD) immediately until the disc is ejected.
The disc ejection can be sudden. Take care not to injure your
fingers when the disc tray opens.
]Confirm that the source is properly connected.
● All necessary power switches have not been turned on.
]Confirm that all units’ power switches are turned on.
● The setting of the input position is inappropriate.
]Select the input position (“F-1” or “L-1”) that corresponds to the
input terminal connected to the external equipment. (੬ pg. 53)
● The record safety tab has been removed when dubbing to the
cassette.
Images are blurred or distorted when you start High-Speed
Search.
]Images are blurred or distorted at the point where the playback
speed changes and this is not a malfunction of the unit.
]Using adhesive tape, cover the hole where the tab was removed.
Playback does not start.
The on-screen display superimposed on the program played
back/received on this unit is recorded when you dub the program
to an external recording equipment.
]Playback does not start for approximately 30 seconds after
]Set “SUPERIMPOSE” to “OFF”. (੬ pg. 59, 61)
Playback does not start when you select a title or a chapter.
The unit does not operate.
● The Parental Lock is engaged and the disc is rated higher than
the set level.
● There are cases when the operation is prohibited on the disc.
]Release the Parental Lock temporarily or change the set level.
(੬ pg. 32)
● Lightning or static electricity may cause malfunction of the unit.
]Press 1 to turn the power off, then press the button again to
turn the power on.
Playback (VCR Deck)
The VCR deck can not be operated.
● The VCR deck is not selected.
]Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
The tape will not rewind or fast-forward.
● The tape is already fully rewound or fast-forwarded.
]Check the cassette.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
67
The playback picture does not appear while the tape is running.
Other Problems
● The TV is not set to the AV mode.
]Set the TV to its AV mode.
The image of the program appears distorted on the TV screen.
For basic connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator ( ) lights off on the front display panel.
Noise appears during visual search.
● This is normal.
For component video connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator ( ) lights up on the front display panel.
Noise appears during normal playback.
● The automatic tracking mode is engaged.
]Try manual tracking. (੬ pg. 35)
Whistling or howling is heard from the TV during camcorder
recording.
The playback picture is blurred or interrupted while external AV
inputs are clear or “USE CLEANING CASSETTE” message
appears on the screen.
● The camcorder’s microphone is too close to the TV.
]Position the camcorder so its microphone is away from the TV.
● The TV’s volume is too high.
● The video heads may be dirty.
]Use a dry cleaning cassette TCL-3F, or consult your JVC dealer.
]Turn the TV’s volume down.
Breaks are noticeable in Hi-Fi soundtrack.
The AV input cannot be changed.
● The automatic tracking mode is engaged.
]Try manual tracking. (੬ pg. 35)
● Recording is in progress.
]Press 9 to pause the recording, change auxiliary input, then
press 4 to resume recording.
Recording (DVD Deck)
Buttons and controls do not function at all.
Recording cannot be made.
● Mode Lock is activated.
]Press and hold F1 for more than 5 seconds to cancel Mode
Lock.
● No disc or a disc not being compatible with the unit is loaded.
]Load a recordable disc on the unit. (੬ pg. 7)
● The disc loaded is not formatted.
]Format the disc. (੬ pg. 62)
]Recording cannot be made on finalized discs. Load a recordable
disc on the unit.
● The disc is full or does not have enough space for the program
to be recorded.
]Clear unnecessary programs on the disc or load a blank disc.
(੬ pg. 41)
Recording (VCR Deck)
During recording, the tape does not run. The VCR recording lamp
lights up on the front display panel.
● The unit is in the Record Pause mode.
]Press 4 to resume recording.
● There is no cassette loaded, or the cassette loaded has had its
record safety tab removed and “REC SAFETY” is set to “ON”.
]Insert a cassette, or using adhesive tape, cover the hole where
the tab was removed and “REC SAFETY” is set to “OFF”
(੬ pg. 61).
Camcorder recording is not possible.
● The camcorder has not been properly connected.
]Confirm that the camcorder is properly connected.
● The input mode is not correct.
]Set the input mode to “F-1”.
The tape is automatically rewound, then the unit is shut off.
● The end of the tape was reached during recording.
]The program may not have been recorded in its entirety. Next
time make sure you have enough time on the tape to record the
entire program.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
68
On-screen Message (DVD Deck Only)
UNREADABLE DISC
CHECK DISC
MEMORY IS FULL
(੬ pg. 8)
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
COULD NOT FORMAT THE DISC
CHECK THE DISC
● The memory is full for registration for the Navigation system. The
recording cannot be started even though the capacity for the
recording is enough. (੬ pg. 44)
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (੬ pg. 10, 62)
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
COULD NOT FINALIZE THE DISC
CHECK THE DISC
● Finalizing is not complete since the disc may be dirty or
● The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
(੬ pg. 44)
COULD NOT CANCEL DISC FINALIZATION
CHECK THE DISC
● Canceling disc finalization is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (੬ pg. 10,
64)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
PRESS [STOP] AGAIN TO STOP RECORDING
● A disc that is not registered in the library has been inserted.
Register the disc as necessary. (੬ pg. 44)
● During Live Memory playback, 8 has been pressed. (੬ pg. 27)
COPY PROHIBITED
CAN NOT RECORD
INSERT DISC #XXXX
● Appears when a title that has been selected in the library is not
contained in the loaded disc.
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
COPY PROHIBITED
CAN NOT PLAY
● Recording and/or editing cannot be performed with a loaded
DVD-RAM disc.
● The number of play lists exceeds 99.
● The unit has detected invalid contents at the start or in the
middle of playback.
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
been pressed. (੬ pg. 7)
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (੬ pg. 51)
REGION CODE ERROR
CHECK DISC
●
A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. ( pg. 8)
੬
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
EN
69
8 Aspect ratio
The ratio of vertical and horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs is 4:3, and that of
wide-screens is 16:9.
8 Multiangle
By recording multiple scenes progressing at the same time in a
single title, the user can select view angles. This feature is called
the multiangle function.
8 Chapter
8 Multichannel
DVD is specified to have each sound track constitute one sound
field. Multichannel refers to a structure of sound tracks having
three or more channels.
Refers to individual chapters included in a title.
8 Composite video signal
Refers to video signal comprised of three kinds of signals
combined: an image signal made up of luminance and
chrominance signals using the frequency multiplication technique;
burst signal providing the basis for color reproduction; and
synchronization signal.
8 Multilanguage
When a title is created to cope with multiple languages, it is
generally called a multilanguage title.
8 NTSC (National television system committee)
A black and white and color television system format used in the
U.S.A., Canada, Mexico and Japan.
8 Component video signal
A video signal system where parts of information necessary for
reproducing image signal comprised of the three primary colors of
light are transmitted via separate signal lines. Types of signal, such
as R/G/B, Y/PB/PR, etc., are available.
8 PAL (Phase Alternation by Line)
A color television system format used extensively in Western
Europe.
8 Disc menu
A screen display prepared for allowing selection of images,
sounds, subtitles, multiangles, etc. recorded on a DVD disc.
8 Parental Lock
A feature of this system to automatically determine whether or not
to reproduce particular DVD software by comparing its parental
lock level (a measure of undesirability of scenes, etc. from
educational viewpoint) set for the software beforehand with that set
on this system by the user; if the software’s level is less restrictive
than the user-set level, it will be reproduced.
8 Dolby Digital (AC-3)
A six-channel system consisting of left, centre, right, left rear, right
rear and LFE (Low-Frequency Effect channel, for use with a sub-
woofer) channels. All processing is done in the digital domain.
Not all Dolby Digital discs contain six (5.1) channels of information.
8 Playback control (PBC)
8 Down-mix
Internal stereo mix of multichannel surround audio by a DVD
player. The down-mix signals are output from stereo output
connectors.
Refers to the signal recorded on Video CDs for controlling
reproduction. By using menu screens recorded on a Video CD that
supports PBC, you can enjoy interactive-type software as well as
software having a search function.
8 DTS
8 Progressive scan
A Digital Surround audio encoding format configured with six (5.1)
channels, similar to Dolby Digital. It requires a decoder, either in
the player or in an external receiver. DTS stands for Digital Theater
Systems.
Progressive scan displays all the horizontal lines of a picture at one
time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
Not all DTS discs contain six (5.1) channels of information.
8 Interlaced scan
8 Region Code
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
A system for allowing discs to be played back only in the regions
designated beforehand. All the countries in the world are grouped
into six regions, each region being identified by a specified Region
Code (or region number). If the Region Code given to a disc
includes a numeral which matches one in the Region Code of a
player, the player can play back the disc.
8 JPEG
A still-picture data compression system proposed by the Joint
Photographic Expert Group, which features small decrease in
image quality in spite of its high compression ratio.
8 Sampling frequency
Frequency of sampling data when analog data is converted to
digital data. Sampling frequency numerically represents how many
times the original analog signal is sampled per second.
8 Letter box
A method of displaying wide images like movies in the centre of a
4:3 TV screen with no part of the image deleted, by placing black
bands on the top and bottom of the screen. This name has resulted
from the screen form looking literally like a letter box.
8 Surround
A system for creating three-dimensional sound fields full of realism
by arranging multiple speakers around the listener.
8 Linear PCM (PCM: Pulse Code Modulation)
A system for converting analog sound signal to digital signal for
later processing, with no data compression used in conversion.
8 Transfer rate
The rate of transferring digital data. Usually the measure is in baud
per second. The DVD system applies a variable transfer rate
system for high efficiency.
8 MP3
A file format with a sound data compression system. “MP3” is the
abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. By using MP3 format, one CD-R/RW can contain about 10
times as much data volume as a regular CD can.
8 MPEG
A family of Standards for compressing audio-visual information.
“MPEG” standards include MPEG-1, MPEG-2 and MPEG-4. Video
CD and MP3 are based on MPEG-1, while DVD is based on
MPEG-2. MPEG stands for Moving Picture coding Experts Group.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
70
Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
Afar
IN
Indonesian
Icelandic
Hebrew
RU
RW
SA
SD
SG
SH
SI
Russian
Kinyarwanda
Sanskrit
Sindhi
Abkhazian
Afrikaans
Ameharic
Arabic
IS
IW
JI
Yiddish
JW
KA
KK
KL
Javanese
Georgian
Kazakh
Sangho
Serbo-Croatian
Singhalese
Slovak
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
KM
KN
KO
KS
KU
KY
LA
Slovenian
Samoan
Shona
Somali
Bislama
Bengali, Bangla
Tibetan
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
Kirghiz
Latin
Breton
LN
LO
LT
Lingala
Catalan
Corsican
Czech
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
LV
Welsh
MG
MI
TE
TG
TH
TI
Telugu
Bhutani
Greek
Tajik
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Thai
Esperanto
Estonian
Basque
Persian
Fiji
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
TK
TL
TN
TO
TR
TS
TT
FJ
Malay (MAY)
Maltese
FO
FY
GA
GD
GL
GN
GU
HA
HI
Faroese
Frisian
Turkish
Tsonga
Tatar
Burmese
Nauru
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Nepali
TW
UK
UR
UZ
VI
Twi
Occitan
Ukrainian
Urdu
(Afan) Oromo
Oriya
Uzbek
Panjabi
Vietnamese
Volapuk
Wolof
Hindi
PL
Polish
VO
WO
XH
YO
ZH
ZU
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
PS
PT
QU
RM
RN
RO
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Xhosa
Yoruba
Chinese
Zulu
IE
IK
Rumanian
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
71
Country/Area Code List for Parental Lock
AD
AE
AF
AG
AI
Andorra
CK
CL
Cook Islands
Chile
GN
GP
GQ
GR
GS
Guinea
United Arab Emirates
Afghanistan
Guadeloupe
CM
CN
CO
Cameroon
China
Equatorial Guinea
Greece
Antigua and Barbuda
Anguilla
Colombia
South Georgia and the South
Sandwich Islands
AL
Albania
CR
CU
CV
CX
CY
CZ
Costa Rica
Cuba
GT
GU
GW
GY
HK
HM
Guatemala
Guam
AM
AN
AO
AQ
AR
Armenia
Netherlands Antilles
Angola
Cape Verde
Christmas Island
Cyprus
Guinea-Bissau
Guyana
Antarctica
Argentina
Hong Kong
Czech Republic
Heard Island and McDonald
Islands
AS
AT
American Samoa
Austria
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
ET
FI
Germany
Djibouti
HN
HR
HT
HU
ID
Honduras
Croatia
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Australia
Denmark
Dominica
Dominican Republic
Algeria
Haiti
Aruba
Hungary
Azerbaijan
Bosnia and Herzegovina
Barbados
Indonesia
IE
Ireland
Ecuador
IL
Israel
Bangladesh
Belgium
Estonia
IN
India
Egypt
IO
IQ
IR
British Indian Ocean Territory
Burkina Faso
Bulgaria
Western Sahara
Eritrea
Iraq
Iran (Islamic Republic of)
Bahrain
Spain
IS
Iceland
Italy
Burundi
Ethiopia
IT
BJ
Benin
Finland
JM
JO
JP
KE
Jamaica
Jordan
Japan
Kenya
BM
BN
BO
Bermuda
FJ
Fiji
Brunei Darussalam
Bolivia
FK
FM
Falkland Islands (Malvinas)
Micronesia
(Federated States of)
BR
BS
BT
BV
BW
BY
Brazil
FO
FR
FX
GA
GB
GD
Faroe Islands
France
KG
KH
KI
Kyrgyzstan
Cambodia
Bahamas
Bhutan
France, Metropolitan
Gabon
Kiribati
Bouvet Island
Botswana
Belarus
KM
KN
KP
Comoros
United Kingdom
Grenada
Saint Kitts and Nevis
Korea, Democratic People’s
Republic of
BZ
CA
CC
CF
CG
Belize
GE
GF
GH
GI
Georgia
KR
KW
KY
KZ
LA
Korea, Republic of
Kuwait
Canada
French Guiana
Ghana
Cocos (Keeling) Islands
Central African Republic
Congo
Cayman Islands
Kazakhstan
Gibraltar
GL
Greenland
Lao People’s Democratic
Republic
CH
CI
Switzerland
Côte d’Ivoire
GM
Gambia
LB
Lebanon
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
72
LC
LI
Saint Lucia
NU
NZ
OM
PA
Niue
SZ
TC
TD
TF
TG
TH
TJ
Swaziland
Liechtenstein
Sri Lanka
New Zealand
Oman
Turks and Caicos Islands
Chad
LK
LR
LS
Liberia
Panama
French Southern Territories
Togo
Lesotho
PE
PF
PG
PH
PK
PL
Peru
LT
Lithuania
French Polynesia
Papua New Guinea
Philippines
Pakistan
Thailand
LU
LV
Luxembourg
Latvia
Tajikistan
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UM
Tokelau
LY
Libyan Arab Jamahiriya
Morocco
Turkmenistan
Tunisia
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
Poland
Monaco
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
Saint Pierre and Miquelon
Pitcairn
Tonga
Moldova, Republic of
Madagascar
Marshall Islands
Mali
East Timor
Turkey
Puerto Rico
Portugal
Trinidad and Tobago
Tuvalu
Palau
Myanmar
Paraguay
Taiwan
Mongolia
Qatar
Tanzania, United Republic of
Ukraine
Macau
Réunion
Northern Mariana Islands
Martinique
Romania
Uganda
Russian Federation
United States Minor Outlying
Islands
MR
MS
MT
MU
MV
Mauritania
Montserrat
Malta
RW
SA
SB
SC
SD
Rwanda
US
UY
UZ
VA
VC
United States
Saudi Arabia
Solomon Islands
Seychelles
Sudan
Uruguay
Uzbekistan
Mauritius
Maldives
Vatican City State (Holy See)
Saint Vincent and the
Grenadines
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
Malawi
SE
SG
SH
SI
Sweden
VE
VG
VI
Venezuela
Mexico
Singapore
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Malaysia
Mozambique
Namibia
Saint Helena
Slovenia
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
SJ
Svalbard and Jan Mayen
Slovakia
Vanuatu
New Caledonia
Niger
SK
SL
SM
SN
SO
SR
ST
SV
SY
Wallis and Futuna Islands
Samoa
Sierra Leone
San Marino
Norfolk Island
Nigeria
Yemen
Senegal
Mayotte
Nicaragua
Netherlands
Norway
Somalia
Yugoslavia
South Africa
Zambia
NL
Suriname
NO
NP
NR
Sao Tome and Principe
El Salvador
Nepal
Zaire
Nauru
Syrian Arab Republic
Zimbabwe
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
73
RS-232C Interface – Command Table –
Lower OrderN
Higher OrderQ
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Complete
Error
Cassette
Out
Not
Target
ACK
NAK
0
1
2
3
VCR
Selection
DVD
Selection
Play
Stop
Still
4
5
6
Clear
Chapter
Sense
Title
Sense
7
8
Chapter
Search
Title
Search
Date
Preset
Clock
Preset
Finalize
Cancel-
Disc
Finaliza-
tion
DiscErase
TOP
MENU
MENU
NEXT
CHAPTER
PREV
CHAPTER
Setup
SET
UP
DOWN
RIGHT
FF
LEFT
REW
Next Title
Prev Title
Remote
Data
9
Standby
On
Standby
Off
Eject
Fwd Field
Step
Rev Field
Step
A
B
Viss Fwd
Viss Rev
Fwd Shtl
Rev Shtl
Select
Preset
Select
Sense
Date
Data
ClockData
Sense
Sense
Rec
Rec
Pause
C
D
Status
Sense
Tc Data
Sense
CTL
Data
JVCStatus
Sense
Sense
E
F
Command
Target
Rec/Dub
Request
RS-232C Interface – Specifications –
● 9PIN D-Sub
This unit
Mode
Character length
Parity
: Non-synchronous
1
6
5
9
: 8 bits
: Odd
: 1
Start bit
Stop bit
Data rate
: 1
: 9600bps
Bit configuration
PIN No.
Signal
Operation
Direction of
signal
Parity
2
3
5
TxD
RxD
GND
Transmit data
Receive data
This unitNPC
This unitOPC
D0 D1 D2 D3 D4 D5 D6 D7
Signal grounding
Stopping bit
Starting bit
NOTES:
● When using the Serial Command Connector, the cable to be used should be a RS-232C interface cable (straight type).
● It takes about 10 seconds for the communication to be established after turning on the unit.
● During command transmission, a minimum interval of 50 mm/second is required between each command.
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
74
RS-232C Interface – Command –
● Operation Commands
Commands for operating functions such as PLAY and REC on the DVD and VCR deck.
Command
Description
3A
3F
Plays the selected deck.
Stops the selected deck. Resume will be cleared when this is pressed while in the Stop mode. (DVD Deck)
Rec Request will be cleared.
4F
80
Switches the selected deck to the Still mode.
Searches the specified chapter and starts playback from the beginning. (DVD Deck)
See page 76 for data format.
81
Searches the specified title and starts playback from the beginning. (DVD Deck)
See page 76 for data format.
8E
8F
90
91
92
93
94
95
96
97
For setting the date. See page 76 for data format.
For setting the time. See page 76 for data format.
Finalizes the disc. (DVD Deck)
Cancels disc finalization. (DVD Deck)
For erasing rewritable discs. (DVD Deck)
Displays/Closes the top menu of a disc. (DVD Deck)
Displays/Closes the disc menu. (DVD Deck)
Advances to the next chapter. Functions like the 6 button on the remote control. (DVD Deck)
Returns to the previous chapter. Functions like the 2 button on the remote control. (DVD Deck)
Displays/Closes the Main Menu and Library Database DVD Navi screen.
97 N 30: Closes the screen.
97 N 31: Displays the Main Menu screen.
97 N 32: Displays the Library Database DVD Navi screen. (DVD Deck)
98
99
9A
9B
9C
9D
9E
9F
Functions as a confirmation key.
Functions as an up key.
Functions as a down key.
Functions as a right key.
Functions as a left key.
Advances to the next title. Functions like the 6 button on the remote control. (DVD Deck)
Returns to the previous title. Functions like the 2 button on the remote control. (DVD Deck)
Issues the same codes as the wired remote control via RS-232C. Prolonged keypress for VCR deck operations are not
allowed. See page 77 for the remote control codes.
A0
A1
A3
Power On
Power Off
Eject:
AB
AC
FF:
DVD Deck: Functions only during playback. Activates forward search. For details on the search speed, refer to “Variable
VCR Deck: Fast forward. Search Fwd during playback. For details on the search speed, refer to “Variable Speed Search”
(੬ pg. 34).
REW:
DVD Deck: Functions only during playback. Activates reverse search. For details on the search speed, refer to “Variable
Speed Search” (A pg. 21).
VCR Deck: Rewind. Search Rev during playback. For details on the search speed, refer to “Variable Speed Search”
(੬ pg. 34).
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
75
Command
Description
AD
Functions as a key for advancing (FWD) a frame. When this command is received during still mode, the unit advances the
still picture by one frame (or field) in the FWD direction.
AE
Functions as a key for reversing (REV) a frame. When this command is received during still mode, the unit reverses the
still picture by one frame (or field) in the REV direction.
B0
B1
B5
Viss Fwd: Fast forwards to the start position. (VCR Deck)
Viss Rev: Rewinds to the start position. (VCR Deck)
Fwd Shtl: Functions only during playback. Activates forward search.
DVD Deck:
B5 N 30: STILL
B5 N 31: FWD SLOW at a slower speed.
B5 N 32: FWD SLOW at a slow speed.
B5 N 33: FWD SLOW at a fast speed.
B5 N 35: 1x
B5 N 36: FWD SEARCH at a fast speed.
B5 N 37: FWD SEARCH at a faster speed.
B5 N 38: FWD SEARCH at the fastest speed.
B5 N 39: FWD SEARCH at the most fastest speed.
VCR Deck:
B5 N 30: STILL
B5 N 31: FWD SLOW at a slow speed.
B5 N 33: FWD SLOW at a fast speed.
B5 N 35: 1x
B5 N 36: FWD SEARCH at a fast speed.
B5 N 37: FWD SEARCH at a faster speed.
B5 N 38: FWD SEARCH at the fastest speed.
B6
Rev Shtl: Functions only during playback. Activates reverse search.
DVD Deck:
B6 N 30: STILL
B6 N 31: REV SLOW at a slower speed.
B6 N 32: REV SLOW at a slow speed.
B6 N 33: REV SLOW at a fast speed.
B6 N 35: –1x
B6 N 36: REV SEARCH at a fast speed.
B6 N 37: REV SEARCH at a faster speed.
B6 N 38: REV SEARCH at the fastest speed.
B6 N 39: REV SEARCH at the most fastest speed.
VCR Deck:
B6 N 30: STILL
B6 N 31: REV SLOW at a slow speed.
B6 N 33: REV SLOW at a fast speed.
B6 N 35: –1x
B6 N 36: REV SEARCH at a fast speed.
B6 N 37: REV SEARCH at a faster speed.
B6 N 38: REV SEARCH at the fastest speed.
B8
CA
CB
F0
For setting the input, recording mode, audio language selection and subtitle selection. See pages 78 - 80 for data format.
Rec: Starts recording at the selected deck when a Rec Request is received.
Rec Pause: Switches the selected deck to the Rec Pause mode when a Rec Request is received.
Command Target:
F0 N 30: For selecting VCR deck.
F0 N 38: For selecting DVD deck.
FA
Rec Request: For issuing approval for recording. This can be cleared using STOP.
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
76
80: Chapter Search
1st Byte
Hundreds
3*
2nd Byte
Tens
3*
3rd Byte
Ones
3*
Chapter Search
ASCII codes (30 - 39)
E.g. (012)
30
31
32
E.g.: When searching the 12th chapter.
81: Title Search under “ORIGINAL”
1st Byte
2nd Byte
Hundreds
3*
3rd Byte
Tens
3*
4th Byte
Ones
3*
Title Search (ORIGINAL)
ASCII codes (30 - 39)
E.g. (045)
30
30
30
30
34
35
E.g.: When searching the 45th title.
81: Title Search in “PLAY LIST”
1st Byte
2nd Byte
Hundreds
3*
3rd Byte
Tens
3*
4th Byte
Ones
3*
Title Search (PLAY LIST)
ASCII codes (30 - 39)
E.g. (028)
38
38
38
30
32
38
E.g.: When searching the 28th play list.
8E: Date Preset
1st Byte
2nd Byte
Mth (Ones)
3*
3rd Byte
Day (Tens)
3*
4th Byte
Day (Ones)
3*
5th Byte
Yr (Tens)
3*
6th Byte
Yr (Ones)
3*
Date Preset
Mth (Tens)
ASCII code (30 - 39)
E.g. (01.17.2006)
3*
30
31
31
37
30
36
E.g.: When setting the date to January 17 2006.
8F: Clock Preset
1st Byte
Hr (Tens)
3*
2nd Byte
3rd Byte
Min (Tens)
3*
4th Byte
Min (Ones)
3*
5th Byte
Sec (Tens)
3*
6th Byte
Sec (Ones)
3*
Clock Preset
Hr (Ones)
ASCII code (30 - 39)
E.g. (12:34:56)
3*
31
32
33
34
35
36
E.g.: When setting the time to 12 hrs 34 min and 56 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
77
9F: Remote Data
Code
The remote control codes for controlling the VTR (similar to wired remote control) via RS-232C are as shown in
the following table. The codes apply to both DVD and VCR deck unless otherwise stated.
Items
Remarks
VCR Deck only
Code
88 TBC ON/OFF
8E ON SCREEN
Items
Remarks
03 STOP/CLEAR
04 EJECT
VCR Deck only
06 S.FWD/SLOW+
07 S.REV/SLOW–
08 FWD SLOW 1/6
0B POWER ON/OFF
0C PLAY/SELECT
0D PAUSE
90 MEMORY/MARK
96 CM SKIP
DVD Deck only
DVD Deck only
VCR Deck only
97 DV INPUT
AF REV FRAME
B0 –SLOW D
DVD Deck only
B1 SHUTTLE
B2 SHUTTLE
B3 SHUTTLE
B4 SHUTTLE
B5 SHUTTLE
B6 –SLOW B
B7 –SLOW C
B8 +SLOW C
B9 +SLOW B
–
–
–
–
–
C
B
A
2
14 NEXT/6/INDEX +1
15 PREVIOUS/
17 AUDIO
2/INDEX –1
18 INPUT –
19 INPUT +
1
1E ON SCREEN
VCR Deck only
DVD Deck only
20 TEN KEY 0/AUX/SPACE
21 TEN KEY 1
22 TEN KEY 2/ABC
23 TEN KEY 3/DEF
24 TEN KEY 4/GHI
25 TEN KEY 5/JKL
26 TEN KEY 6/MNO
27 TEN KEY 7/PQRS
28 TEN KEY 8/TUV
29 TEN KEY 9/WXYZ
31 REMAIN/REC MODE
36 CANCEL
BA SHUTTLE +1
BB SHUTTLE +2
BC SHUTTLE +A
BD SHUTTLE +B
BE SHUTTLE +C
BF +SLOW D
DVD Deck only
DVD Deck only
C0 ANGLE/LIVE CHECK
C4 SUBTITLE
CC REC
CD REC PAUSE
CE INDEX +1
37 SET UP
38 DISPLAY
CF INDEX
–
1
VCR Deck only
DVD Deck only
39 COUNTER RESET
3C ENTER
VCR Deck only
DVD Deck only
D0 REV SLOW 1/6
D4 RETURN
D6 VCR/DVD
D8 JOG –1
3D FINALIZE
40 AUTO TRACKING ON/
OFF
VCR Deck only
41 TRACKING +
42 TRACKING –
43 VCR DECK
44 DVD DECK
7C SP
D9 JOG –1/2
DA JOG +1/2
DVD Deck only
VCR Deck only
DB JOG +1
DC INSTANT REPLAY
E0 TOP MENU/NAVIGATION
E1 L1 Y/C INPUT SELECT
E2 L1 COMPOSITE INPUT SELECT
EA AUX(L-1) SELECT
EC F-1 Y/C INPUT SELECT
ED FWD FRAME
DVD Deck only
VCR Deck only
7D LP
80 CURSOR e
81 MENU
DVD Deck only
DVD Deck only
82 CURSOR r
84 CURSOR w
86 CURSOR t
87 OPEN/CLOSE
EE F-1 COMPOSITE INPUT SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
78
B8: Input Selection
1st Byte
30
2nd Byte
31
L-1 VIDEO
L-1 S-VIDEO
F-1 VIDEO
F-1 S-VIDEO
DV
30
39
External input selection
30
35
30
3D
30
34
B8: Recording Mode Selection
1st Byte
2nd Byte
30
1st Byte
2nd Byte
93
1st Byte
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
2nd Byte
AA
AB
AC
AD
AE
AF
B0
XP
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
FR150
FR155
FR160
FR165
FR170
FR175
FR180
FR185
FR190
FR195
FR200
FR205
FR210
FR215
FR220
FR225
FR230
FR235
FR240
FR245
FR250
FR255
FR260
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
FR265
FR270
FR275
FR280
FR285
FR290
FR295
FR300
FR305
FR310
FR315
FR320
FR325
FR330
FR335
FR340
FR345
FR350
FR355
FR360
FR420
FR480
SP
31
94
LP
32
95
EP
33
96
DV
38
97
FR60
FR65
FR70
FR75
FR80
FR85
FR90
FR95
FR100
FR105
FR110
FR115
FR120
FR125
FR130
FR135
FR140
FR145
81
98
82
99
83
9A
9B
9C
9D
9E
9F
B1
84
B2
85
B3
86
B4
87
B5
88
B6
89
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
B7
8A
8B
8C
8D
8E
8F
90
B8
B9
BA
BB
BC
BD
C9
D5
91
92
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
79
B8: Audio Language Selection
1st Byte
2nd Byte
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3C
3D
3E
1st Byte
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
2nd Byte
3F
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
1st Byte
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
2nd Byte
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
DUTCH
SWEDISH
NORWEGIAN
FINNISH
DANISH
JAPANESE
AA
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
HI
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
SK
SL
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
AB
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
TE
TG
TH
TI
BI
BN
BO
LV
BR
MG
MI
TK
TL
CA
CO
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
PL
PS
PT
QU
TN
TO
TR
TS
TT
CS
CY
DZ
EL
EO
TW
UK
UR
UZ
VI
ET
EU
FA
FJ
FO
VO
WO
XH
YO
ZH
ZU
FY
GA
GD
GL
GN
GU
HA
See “Language Code List” (੬ pg. 70).
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
80
B8: Subtitle Selection
1st Byte
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
2nd Byte
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3B
3C
3D
1st Byte
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
2nd Byte
3E
3F
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
1st Byte
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
2nd Byte
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
OFF
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
DUTCH
SWEDISH
NORWEGIAN
FINNISH
DANISH
JAPANESE
AA
HA
HI
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
SK
SL
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
AB
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
TE
TG
TH
TI
BI
BN
BO
LV
BR
MG
MI
TK
TL
CA
CO
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
PL
PS
PT
TN
TO
TR
TS
TT
CS
CY
DZ
EL
EO
TW
UK
UR
UZ
VI
ET
EU
FA
FJ
FO
VO
WO
XH
YO
ZH
ZU
FY
GA
GD
GL
GN
GU
See “Language Code List” (੬ pg. 70).
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
81
● System Commands
Commands relating to RS-232C control system.
Command
Description
Complete: Issued by the VTR upon completing all specified operations by commands such as Title Search.
01
02
Error: Issued by the VTR when receiving invalid commands in the context. In such cases, commands that are sent will
not be accepted. However, a return command will be issued but only to the Status Sense. To clear the Error status,
perform command 56 (Clear).
05
Not Target: Issued by the VTR when specified operations by commands such as Title Search cannot be completed
properly.
0A
0B
56
ACK: A return command issued when a defined command is received.
NAK: A return command issued when an undefined or possibly nonexistent command is received.
Clear: Clears the Error status.
● Response Commands
Commands for acquiring information such as deck status.
Command
Description
03
60
Cassette Out: Issued by the VCR deck when the cassette is ejected after ejecting is performed.
Chapter Sense: For acquiring the current chapter number.* (DVD Deck)
61
Title/Track Sense: For acquiring the current title number under “ORIGINAL” or in the “PLAY LIST”.* (DVD Deck)
Select Sense: For acquiring the status of the inputs, recording mode, audio language selection and subtitle selection.*
Date Data Sense: For acquiring the currently configured year, month and day.*
B9
BE
BF
D7
D8
Clock Data Sense: For acquiring the currently configured hour, minute and second.*
Status Sense: For acquiring the deck information.*
TC Data Sense: For acquiring the total remaining time in the current recording mode when there is a media in the
D9
CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck.*
JVC Status Sense: Returns data from the unit.*
DD
* See pages 81 - 84 for data format.
Chapter Sense
1st Byte
2nd Byte
Tens
3*
3rd Byte
Ones
3*
Chapter Sense
60
Hundreds
3*
E.g. (012)
30
31
32
E.g.: When the current chapter is the 12th chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
82
Title/Track Sense under “ORIGINAL”
1st Byte
30
2nd Byte
Hundreds
3*
3rd Byte
Tens
3*
4th Byte
Ones
3*
Title/Track Sense (ORIGINAL)
61
30
E.g. (045)
30
30
34
35
E.g.: When the current title under “ORIGINAL” is the 45th title.
Title/Track Sense in “PLAY LIST”
1st Byte
38
2nd Byte
Hundreds
3*
3rd Byte
Tens
3*
4th Byte
Ones
3*
Title/Track Sense (PLAY LIST)
61
38
E.g. (028)
38
30
32
38
E.g.: When the current title under “PLAY LIST” is the 28th title.
Select Sense
1st Byte
2nd Byte
—
3rd Byte
4th Byte
5th Byte
Select Sense
External input
selection
Recording mode
selection
Audio language
selection
Subtitle selection
B9
3*
2D
2D
**
**
**
E.g. (392D311112)
39
31
11
12
E.g.: When the selection status of the VTR is as follows:
External input selection N L-1 S-VIDEO
Recording mode selection N SP
Audio language selection N ENGLISH
Subtitle selection N GERMAN
For response data for B9, see data format for B8 (Select Preset) on pages 78 - 80.
Date Data Sense
For acquiring the currently configured year, month and day in ASCII codes.
1st Byte
Mth (Tens)
3*
2nd Byte
Mth (Ones)
3*
3rd Byte
Day (Tens)
3*
4th Byte
Day (Ones)
3*
5th Byte
Yr (Tens)
3*
6th Byte
Yr (Ones)
3*
Date Sense
BE
E.g. (01.17.2006)
30
31
31
37
30
36
When the current date is not set, the value is fixed as “—” (0x2D).
Clock Data Sense
For acquiring the currently configured hour, minute and second in ASCII codes.
1st Byte
Hr (Tens)
3*
2nd Byte
Hr (Ones)
3*
3rd Byte
Min (Tens)
3*
4th Byte
Min (Ones)
3*
5th Byte
Sec (Tens)
3*
6th Byte
Sec (Ones)
3*
Clock Sense
BF
E.g. (12:34:56)
31
32
33
34
35
36
When the current time is not set, the value is fixed as “—” (0x2D).
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
83
Status Data Sense
D7 STATUS
SENSE
1byte
2byte
3byte
VCR
0 (Fixed)
DVD
1 (Fixed)
VCR
Video EE
DVD
Video EE
VCR
0 (Fixed)
DVD
0 (Fixed)
bit7
bit6
bit5
bit4
1 (Fixed)
0 (Fixed)
1 (Fixed)
0 (Fixed)
Audio EE
0 (Fixed)
0 (Fixed)
Audio EE
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
Record
Record
Forbidden
Forbidden
bit3
bit2
Cassette Not
Inserted
Disc Not Inserted Occurrence of
Occurrence of
abnormality in
VTR
0 (Fixed)
0 (Fixed)
0 (Fixed)
abnormality in
VTR
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During Repeat
Playback
(Including
PAUSE)
bit1
bit0
0 (Fixed)
0 (Fixed)
Start sensor
End sensor
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
RS-232C
RS-232C
command error
status. Clear
using 56 (Clear).
command error
status. Clear
using 56 (Clear).
D7 STATUS
SENSE
4byte
5byte
VCR
DVD
VCR
DVD
bit7
During PLAY
(Including STILL
and search)
During PLAY
(Including STILL
and search)
During PAUSE
During PAUSE
bit6
bit5
During FF
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During REW
During Forward Shuttle Search
(Excluding STILL)
During Forward Shuttle Search
(Excluding STILL)
bit4
bit3
bit2
bit1
During STOP
During STOP
During Reverse Shuttle Search
(Excluding STILL)
During Reverse Shuttle Search
(Excluding STILL)
During STANDBY
(Unit Power Off)
During STANDBY
(Unit Power Off)
SPEED CODE 3
SPEED CODE 2
SPEED CODE 1
SPEED CODE 3
SPEED CODE 2
SPEED CODE 1
During CASSETTE 0 (Fixed)
EJECT
During REC
(Including REC
PAUSE)
During REC
(Including REC
PAUSE)
bit0
0 (Fixed)
0 (Fixed)
SPEED CODE 0
SPEED CODE 0
If the status of the VTR matches to that stated in the above tables, the value returned is “1”. Otherwise, the value “0” is returned.
For details on SPEED CODE 0 - 3, refer to the SPEED CODE table on page 84.
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
84
SPEED CODE
DVD
VCR
SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED
CODE 3 CODE 2 CODE 1 CODE 0 CODE 3 CODE 2 CODE 1 CODE 0
(bit3)
(bit2)
(bit1)
(bit0)
(bit3)
(bit2)
(bit1)
(bit0)
STILL
0
0
0
0
0
0
0
1
1
0
0
0
0
1
1
1
0
0
0
0
1
1
0
1
1
0
0
0
1
0
1
1
0
1
0
1
0
0
0
0
FWD/REV SLOW at a slower speed
FWD/REV SLOW at a slow speed
FWD/REV SLOW at a fast speed
1x/-1x
0
0
0
1
0
0
1
1
0
1
1
1
FWD/REV SEARCH at a fast speed
FWD/REV SEARCH at a faster speed
FWD/REV SEARCH at the fastest speed
FWD/REV SEARCH at the most fastest speed
1
0
0
0
TC Data Sense
For acquiring the remaining time in the current recording mode in hours, minutes and seconds for DVD, and
hours and minutes for VCR.
1st Byte
2nd Byte
3rd Byte
4th Byte
5th Byte
6th Byte
7th Byte
8th Byte
TC Data Sense
Hr (Tens)
Hr (Ones)
Min (Tens)
Min (Ones)
Sec (Tens)
Sec (Ones)
Frame
(Tens)
Frame
(Ones)
D8
3*
3*
3*
3*
3*
3*
2D
2D
2D
2D
E.g. (01:23:45)
30
31
32
33
34
35
E.g.: When remaining time is 1 hr 23 min 45 sec.
VCR (hr and min only)
DVD (hr, min and sec only)
Frame is fixed as “—” (0x2D).
CTL Data Sense
CTL Data Sense
For acquiring lapse counter of selected deck in hours, minutes and seconds.
1st Byte
2nd Byte
3rd Byte
4th Byte
5th Byte
6th Byte
7th Byte
8th Byte
Hr (Tens)
Hr (Ones)
Min (Tens)
Min (Ones)
Sec (Tens)
Sec (Ones)
Frame
(Tens)
Frame
(Ones)
D9
3*
3*
3*
3*
3*
3*
2D
2D
2D
2D
E.g. (01:23:45)
30
31
32
33
34
35
E.g.: When time lapse counter is 1 hr 23 min 45 sec.
Frame is fixed as “—” (0x2D).
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE (SR-MV55U ONLY)
EN
85
JVC Status Sense
DD JVC
SENSE
1byte
2byte
3byte
4byte
VCR
1 (Fixed)
0 (Fixed)
DVD
1 (Fixed)
0 (Fixed)
0 (Fixed)
VCR
DVD
VCR
1 (Fixed)
0 (Fixed)
0 (Fixed)
DVD
VCR
1 (Fixed)
1 (Fixed)
0 (Fixed)
DVD
bit7
bit6
bit5
0 (Fixed)
0 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
1 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
1 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
During
bit4
bit3
Playback of EP 0 (Fixed)
Recorded Tape
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During
During
dubbing
(Including
PAUSE)
dubbing
(Including
PAUSE)
0 (Fixed)
0 (Fixed)
Refer to the
DISC TYPE
table below.
bit2
bit1
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During
During
dubbing
(Including
PAUSE)
dubbing
(Including
PAUSE)
bit0
1 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
DISC TYPE
bit3
0
bit2
0
bit1
0
bit0
0
DVD
DVD-RAM
DVD-R
DVD-RW
DVD+R
DVD+RW
VCD
0
0
0
1
0
0
1
0
0
0
1
1
0
0
0
0
0
0
0
0
0
1
1
0
CD
0
1
1
1
...
...
1
...
1
...
1
...
1
No disc
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
86
GENERAL
VIDEO/AUDIO (VCR Deck)
Power requirement
Signal system
AC 120 Vd, 60 Hz
NTSC color signal and EIA monochrome signal, 525 lines/60 fields
Recording system
Power consumption
Power on: 52 W
Power off: 2.7 W
Temperature
Operating: 5°C to 35°C (41°F to 95°F)
Storage: –20°C to 60°C (–4°F to140°F)
Operating position
Horizontal only
Dimensions (WxHxD)
435 mm x 96 mm x 343 mm (17-3/16" x 3-13/16" x 13-1/2")
Weight
5.5 kg (12.1 lbs)
Input/Output
S-video input:
DA4 (Double Azimuth) head helical scan system
Format
S-VHS/VHS NTSC standard
Maximum recording time
(SP): 210 min. with ST-210 video cassette
(EP): 30 min. with ST-210 video cassette
Signal-to-noise ratio
45 dB
Horizontal resolution
230 lines
Frequency range
(Normal audio): 70 Hz to 10,000 Hz
(Hi-Fi audio): 20 Hz to 20,000 Hz
Y: 0.8 – 1.2 Vp-p, 75 ohms
C: 0.2 – 0.4 Vp-p, 75 ohms
S-video output:
Specifications shown are for SP mode unless otherwise specified.
Y: 1.0 Vp-p, 75 ohms
C: 0.3 Vp-p, 75 ohms
ACCESSORIES
Video input: 0.5 – 2.0 Vp-p, 75 ohms (pin jack)
Video output: 1.0 Vp-p, 75 ohms (pin jack x1, BNC x 1)
Audio input:
–8 dB, 50 kohms (pin jack)
Corresponding to mono (left)
Audio output: –8 dB, 1 kohms (pin jack)
i.Link: 4-pin for DV input
Component video output:
Y: 1.0 Vp-p, 75 ohms
Provided accessories
Audio cable,
S-video cable,
Infrared remote control unit,
“AA” battery x 2
E.& O.E. Design and specifications subject to change without
notice.
CB/CR, PB/PR: 0.7 Vp-p, 75 ohms
Corresponding to copy protection
Remote Input: R3.5 mm
Serial Command: D-SUB 9-PIN
Digital audio output:
Optical: –18 dBm, 660 nm
Coaxial: 0.7 Vp-p, 75 ohms
Corresponding to Dolby Digital and DTS Digital Surround
Bit stream
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch the
unit off and unplug the mains power cord. Then plug it in again and
turn the unit on. Take out the disc. After checking the disc, operate
the unit as usual.
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording format
DVD-RAM: DVD Video Recording format
DVD-R: DVD-Video format
DVD-RW: DVD-Video format, DVD Video Recording format
Recording time
Maximum 8 hours (with 4.7 GB disc)
(XP): Approx. 1 hour
(SP): Approx. 2 hours
(LP): Approx. 4 hours
(EP): Approx. 6 hours
(FR): Approx. 1 hour – 8 hours
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system
MPEG2 (CBR/VBR)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF TERMS
EN
87
A
O
A-B Repeat Playback ................................................ 29
Accidental erasure prevention .................................... 36
Active Video Calibration ............................................ 38
Adjusting The Picture Quality ..................................... 30
Angle Selection ........................................................ 23
Audio Channel Selection ........................................... 24
Audio Language/Sound Selection ............................... 23
Auto Finalizing ......................................................... 46
P
Pan&Scan ................................................................ 19
Play List ................................................................... 42
Playback Control (PBC) ............................................. 24
Program Playback .................................................... 31
C
R
Clock Set ................................................................. 17
Copy mode .............................................................. 60
Register Disc ............................................................ 44
Remote control 1/2/3/4 Code Switching ....................... 55
Repeat Playback ................................................ 29, 35
Repeat Recording ..................................................... 38
D
Daylight Saving Time ................................................ 17
Delete Program ........................................................ 41
Digital TBC/NR ......................................................... 35
Disc menu ............................................................... 21
Disc Remaining Time ................................................ 37
Discs For Playback Only ............................................. 7
Dubbing ............................................................ 46 – 54
DVD menu ............................................................... 21
E
S
Elapsed Recording Time Indication .......................37, 38
Select The Switching Interval Of The Slide Show ......... 31
Setting The Progressive Mode ................................... 31
Soundtrack Selection ................................................ 35
Still Picture/Frame-By-Frame Playback ................. 22, 34
F
File Structure Of Discs ................................................ 8
Finalize A Disc ......................................................... 63
Format A Disc .......................................................... 62
Free Rate Function ................................................... 37
I
Index Search ............................................................ 34
Initial settings .................................................... 17 – 19
Input select .............................................................. 36
Instant Replay .....................................................27, 34
T
Top menu ................................................................ 21
J
JPEG ............................................................... 7, 9, 45
L
Last Function Memory ............................................... 65
Letter Box ................................................................ 19
Live Memory ............................................................ 24
U
M
Manual Tracking ....................................................... 35
Marking Positions To Play Back Again Later ................ 22
Menu/Audio/Subtitle Language Set ............................. 18
Mode Lock ............................................................... 65
Mode Set .......................................................... 58 – 61
MP3 ................................................................. 7, 9, 45
V
Video input select (S-VIDEO/VIDEO) .......................... 59
N
Next Function Memory .............................................. 35
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in China
1206MNH-SW-BJ
US
© 2006 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|