DVD / HDD VIDEO RECORDER &
VIDEO CASSETTE RECORDER
DR-MX1S
CABLE/SAT
17
TV
DVD
STANDBY/ON
TV/CBL/SA
DVD
TV
TV AV
T
VIDEO
VHS
HDD
DVD
TV
PR
CANCEL
LIVE
AUX
MEMO/MARK
DUBBING
EDIT PROGRAMME
NAVIGATION
TOP MENU
MENU
ENTER
RETURN
PREVIOUS
SLOW
NEXT
SLOW
PLAY/SELECT
CLEAR
REC
STOP/
PAUSE
JUMP
REC MODE
REMAIN
DISPLAY
ON SCREEN
SET UP
RAM/RW
INSTRUCTIONS
EN
LPT0976-001B
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY FIRST
EN
3
MOISTURE CONDENSATION
For Italy:
Moisture in the air will condense on the unit when you move it from
a cold place to a warm place, or under extremely humid
conditions^just as water droplets form on the surface of a glass
filled with cold liquid. In conditions where condensation may occur,
disconnect the unit’s power plug from the wall and keep it
disconnected for a few hours to let the moisture dry, then turn on
the unit.
AIt is declared that this product, brand JVC, conforms to the
Ministry Decree n. 548 of 28 Aug.’95 published in the Official
Gazette of the Italian Republic n. 301 of 28 Dec.’95B
The STANDBY/ON A button does not completely shut off
mains power from the unit, but switches operating current on
and off. ABB shows electrical power standby and ACB shows ON.
ATTENTION:
To mobile phone users:
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
Using a mobile phone in the vicinity of the unit may cause picture
vibration on the TV screen or change the screen to a blue back
display.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
On placing the unit:
Some TVs or other appliances generate strong magnetic fields.
Do not place such appliances on top of the unit as it may cause
picture disturbance.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc.
1. DO NOT place the unit ^
When moving the product:
before unplugging the power cord. Then, wait at least 2 minutes
before moving the product.
^ in an environment prone to extreme temperatures or
humidity.
^ in direct sunlight.
^ in a dusty environment.
^ in an environment where strong magnetic fields are
generated.
HOW TO USE THIS INSTRUCTION MANUAL
Contents on page 4. Use this when searching for information on
a specific procedure or feature.
● The Index on pages 10 – 13 illustrates the controls and
connections on the front and rear panel, the front display panel
and the remote control.
● The list of terms on page 99 lists frequently-used terms, and the
number of the page on which they are used or explained in the
manual.
● The A mark signals a reference to another page for instructions
or related information.
^ on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
● Operation buttons necessary for the various procedures are
clearly indicated through the use of illustrations at the beginning
of each major section.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY FIRST
4
EN
Safety Precautions.........................................................................2
About Discs....................................................................................5
INDEX
INITIAL SETTINGS
Auto Set Up..................................................................................17
Language .....................................................................................20
Dubbing ....................................................................................... 64
Edit To Or From Another Recorder ............................................. 71
SAT CONTROL SET
BASIC OPERATIONS ON DVD DECK
Basic Playback.............................................................................24
SYSTEM CONNECTIONS
76
BASIC OPERATIONS ON HDD DECK
Basic Playback.............................................................................39
Playback Features .......................................................................39
c System Setup............................................................. 83
Clock Set ..................................................................................... 86
Finalise A Disc (DVD Deck Only) ................................................ 88
Scan Mode Set............................................................................ 89
BASIC OPERATIONS ON VHS DECK
Playback Features .......................................................................42
Recording Features......................................................................44
SPECIFICATIONS
APPENDIX
94
95
99
TIMER RECORDING ON HDD/DVD DECK
49
c Timer Programming ....................................................49
Manual Timer Programming.........................................................51
Automatic Satellite Programme Recording
LIST OF TERMS
(HDD Deck Only).......................................................................53
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
5
DVD-R/RW Discs
It is only possible to use DVD-R discs which conform with DVD-R
standard Version 2.0.
About Discs
DVD-RW discs, dubbing cannot be achieved at 8x speed and 4x
speed respectively.
When a DVD-R/RW disc (Video mode) is finalised (A pg. 88), it
can be played back on a standard DVD player as a DVD VIDEO
disc.
Recordable/Playable Discs
You can use discs with the following logos for recording and
playback.
When a DVD-RW disc (VR mode) is finalised (A pg. 88), it can be
played back on a standard DVD player compatible with the VR
mode of DVD-RW discs.
Before finalising ^
DVD-RAM
DVD-RW
^ it is possible to record on unrecorded areas of the disc, edit the
disc title and programme titles, and delete programmes.
● It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalised.
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
programme is deleted from a DVD-R disc.
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Ver. 2.0/2x speed
Ver. 2.1/1x – 3x speed
12 cm: 4.7 GB/9.4 GB
Ver. 1.1/1x – 2x speed
(Video mode/VR mode)
Ver. 1.2/4x speed
(Video mode/VR mode)
After finalising ^
After a DVD-R/RW disc (Video mode) has been finalised, it is
possible to play back the recorded programmes (video and/or
audio) on a standard DVD video player as a DVD VIDEO disc.
● Edited titles are displayed as the
DVD-R
12 cm: 4.7 GB
8 cm: 1.4 GB
CONTENTS MENU
PREV
ADVD menuB in video mode.
81 Sister Princess ED2 14/11 0:55 PR12<HDD MN26
82 GALAXY ANGLE A#04 OP 06/10 9:30 PR12<HDD
83 GALAXY ANGLE A#04 ED 06/10 9:30 PR12<HDD
84 FISHING WORLD OP 22/12 20:00 PR3
85 FISHING WORLD ED 22/12 20:00 PR3
86 RALLY CAR OP 10/04 0:30 PR3
16.11.2002
07.10.2002
07.10.2002
22.12.2002
22.12.2002
04.10.2002
04.10.2002
02.05.2002
02.05.2002
26.09.2002
● It is impossible to record, edit or
delete the data either in video
mode or in VR mode.
● Either in video mode or in VR
mode, although the disc can be
played back on DVD players from
other manufacturers, sometimes it
Ver. 2.0/1x – 4x/8x speed
(Video mode)
87 RALLY CAR ED 10/04 0:30 PR3
● The above table is based on the information as of October 2004.
● Recording and playback may not be performed depending on the
characteristics and condition of the disc used, leading to
unsatisfactory results. Using discs manufactured by JVC is
recommended since they have been tested to be compatible with
this unit.
88 Chobits #04 OP 02/05 PR10
89 Chobits #04 ED 02/05 PR10
90 Chobits #25 ED 26/09 PR10 MN32 LPCM
NEXT
may not be possible to play back depending on the disc and
recording conditions.
● It is impossible to record on CD-R/RW or DVD-R discs used for
authoring.
● It is impossible to record onto DVD-R/RW (Video mode) discs
broadcasts that allow you to copy once. The copy once
programmes can only be recorded onto DVD-RW discs formatted
in VR mode.
DVD-RAM Discs
It is only possible to use discs which conform with DVD-RAM
standard Version 2.0 or 2.1.
● It is impossible to record on DVD-RAM discs which do not
conform to this standard. If you use a disc formatted under a
different standard version, format it on this unit before use.
● It may not be possible to record, play back, edit or dub a
DVD-RAM disc even if it conforms to the standard if it was
recorded or edited on the devices from other manufacturers or on
a PC, or if it has far too many titles, or if there is very little
available capacity remaining on the disc.
NOTE:
The following may result if you play back a DVD-R disc recorded
on another unit.
● The disc does not play.
● A mosaic pattern (block noise) appears on the screen.
● Video or audio may be dropped out.
● The unit stops during playback.
● DVD-RAM discs recorded on this unit cannot be played back on
an incompatible DVD player.
● It is possible to record copy-once programmes of digital
broadcasts only onto 4.7/9.4 GB DVD-RAM discs (2.8 GB
DVD-RAM discs are not compatible).
● Although this unit supports 3x speed DVD-RAM discs, dubbing
cannot be achieved at 3x speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
6
EN
Discs For Playback Only
Unplayable Discs
You can use discs with the following logos for playback only.
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
DVD VIDEO
Video CD/Super Video CD
(example of region code
indications)
● CD-ROM discs (including PHOTO-CD and CD-G)
● Discs recorded in Packet Write (UDF) format
● 1.3-GB double density CDs (DDCD)
● High density CDs (HDCD)
The following discs also cannot be played back.
● Discs of a region number other than A2B
● DVD-RAM (2.6 GB/5.2 GB)
● DVD-RAM (TYPE1)
Audio CD
CD-DA files
CD-R
CD-DA/JPEG/
MP3 files
Region Number
The world is divided into 6 regions for DVD VIDEO discs.
DVD VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played back
on this unit unless the region number of the disc matches that of
the unit. The region number for this unit is A2B. Only discs whose
region number includes A2B or AALLB can be played back such as
shown below.
CD-ROM
CD-RW
CD-DA/JPEG/
MP3 files
JPEG/MP3 files
● Playback may not be performed depending on the characteristics
and condition of the disc used.
● DTS Audio CDs can also be played back (An optional DTS
decoder is required).
Examples of DVD VIDEO labels which can be played back
using this unit.
● MP3 and JPEG discs can be played back on this unit only when
they have been recorded in the ISO9660 or Joliet format and
finalised.
● JPEG files that can be played back on this unit must conform to
JFIF/Baseline process, and the maximum resolution of a JPEG
file is 2,812 x 2,112 pixels.
Marks of discs in this instruction manual
● CD-R/RW discs recorded in music CD format need to be finalised
to play back on this unit.
● Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Before you play back a CD, check for the CD logo and read the
notes on the package to confirm that it conforms to the Compact
Disc specification.
● Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD/SVCD discs
may be restricted. Since this unit plays back discs according to
the intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
● When switching from the first layer to the second layer of double-
layered DVD VIDEO discs, the image and sound may be
momentarily distorted. This is not a malfunction.
● DVD-AUDIO discs compatible with DVD video players can be
played.
Allows operation with a
DVD-RAM disc.
Allows operation with a
Video CD/Super Video
CD (SVCD) disc.
Allows operation with a
DVD-R disc.
Allows operation with
an Audio CD disc.
Allows operation with a
DVD-RW disc.
Allows operation with a
disc including MP3
files.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
disc including JPEG
files.
● Super Audio CDs (SACD) compatible with conventional CD
players can be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
7
Audio CD/Video CD/SVCD
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video CD/
SVCD discs.
However, some discs are not divided into tracks.
Recording Medium And Format
DVD-RAM
● Recording and erasing can be performed as many times as
possible on a disc.
● Editing can be performed after recording, such as deleting
unwanted parts.
● While recording, it is possible not only to start playback of a
programme currently being recorded, but also to watch another
programme previously recorded.
Audio CD or Video CD/SVCD
Track 1
Track 2
Track 3
Track 4
DVD-RW (VR mode)
● Recording and erasing can be performed as many times as
possible on a disc.
● Editing can be performed after recording, such as deleting
unwanted parts.
JPEG/MP3 Disc (CD-R/RW/ROM)
MP3/JPEG files put in directories nested in several levels on a disc
will be organized as if they were put in single level directories
(groups) by the MP3/JPEG Navigation of this unit. (A pg. 63)
File structure of a disc before starting the MP3/JPEG
Navigation
DVD-RW (Video mode)
● Can be played back on other DVD players.
● New recording can be performed by erasing all the data on a disc
once played back.
DVD-R
● Can be played back on other DVD players.
● Suitable when keeping a recorded disc for a long time.
File Structure Of Discs
Directory
MP3 file
JPEG file
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
AtitlesB. Each title has a number (title number) that can be used to
select desired titles. Titles are further divided into units called
AchaptersB. Each chapter has a number (chapter number) that can
also be used to select desired chapters. Note that some discs are
not divided into titles and chapters.
File structure of the disc after starting the MP3/JPEG
Navigation
Files are automatically grouped as follows and displayed on the
MP3/JPEG Navigation screen. Data is displayed in the
alphabetical order of file name. Files are grouped based on roots.
When you record a programme on a DVD-RAM/RW (VR mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes from monaural to stereo
due to commercial breaks, etc. It is also possible to insert chapter
marks at desired locations during playback. (A pg. 27)
When you record a programme on a DVD-R/RW (Video mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes due to commercial breaks,
etc. It is also possible to insert chapter marks at desired locations
during either recording or playback. Once the disc has been
finalised, these chapter marks are deleted and new chapter marks
are assigned automatically approximately every 5 minutes.
DVD-RAM, DVD-RW, DVD-R or DVD VIDEO disc
● This unit can recognise up to 9 hierarchies including directories
and files.
Title 1
Title 2
Also, it can recognise up to 250 files in each group, and up to 99
groups on a disc.
Chapter 1
Chapter 2 Chapter 3
Chapter 1 Chapter 2 Chapter 3
NOTES:
● In Video mode, even before finalising, it is impossible to perform
editing operations other than changing the disc name and/or title
names and deleting programmes and/or titles.
● Video CD/SVCD discs that support Playback Control (PBC)
The contents of a disc are recorded into several hierarchies, and
played back according to the instructions on the screen while
navigating through the hierarchies. It is also possible to playback
recorded tracks consecutively without activating the PBC function
even when playing a PBC-compatible disc. (A pg. 28)
● Regarding the contents recorded on discs
Some files may not be played back depending on the file types
and other factors.
● After finalising, it is impossible to perform editing operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
8
EN
DVD VIDEO Marks
Placing A Disc
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc
may not include a mark even for a function it supports.
Opening the disc tray
Press M to open the disc tray.
Marks related to video
Number of subtitles
Number of angles
VHS/HDD/DVD
SELECT
DVD
–
DV IN
DISPLAY VHS TIMER
REC MODE
Recorded under the
standard 4:3 aspect
ratio
Screen includes
black bands at the
top and the bottom
of image which has
a standard 4:3
aspect ratio (letter
box)
● Pressing the button again closes the disc tray.
● Use the button to open and close the disc tray.
● Do not block the disc tray with your hand while it is opening or
closing as this may result in hardware failure.
● Do not place unplayable discs or any object other than a disc on
the disc tray.
Video playback is in Wide video mode (16:9)
on wide televisions, but in letter box on
televisions with standard 4:3 aspect ratio.
● Do not press down strongly on the disc tray or place any heavy
objects on it.
Video playback is in Wide video mode (16:9)
on wide televisions, but pan and scan is used
on televisions with standard 4:3 aspect ratio
(either the left or right side of the image is cut-
out).
Discs without cartridges
Marks related to audio
Number of audio tracks
Disc tray
Dolby Digital mark
It has been developed by Dolby Laboratories as
a digital surround system.
Place the disc on the disc tray with the label side facing up. Since
disc size changes depending on the disc to be played back, be
sure to correctly align the disc with the grooves for its size. If the
disc is not in its groove, it may be scratched or otherwise
damaged. To insert an 8 cm disc, place it according to the inner
groove.
DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL OUT connector of the unit.
DVD-RAM discs contained in cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with ASide AB facing down, programmes are recorded on the side
A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
9
Care And Handling Of Discs
How to handle discs
When handling a disc, do not
touch the surface of the disc.
Since discs are made of
plastic, they are easily
damaged. If a disc gets dirty,
dusty, scratched or warped, the
images and sound will not be
picked up correctly, and such a
disc may cause the unit to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesives
on its surface.
Recording side
Make sure that discs are not scratched and dirty on the recording
side before use. Scratches and dirt on the recording side of a disc
may hinder proper playback and recording. Also be careful that a
DVD-RAM disc may get scratched or dirt when removed from
cartridge then put back in after use.
Storage
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering
to a disc, wipe with a soft dry cloth, moving
from the centre outwards.
If a disc is difficult to clean, wipe with a cloth
moistened with water. Never use record
cleaners, petrol, alcohol or any anti-static
agents.
CAUTION:
Sometimes during playback, noise may appear or images may
be garbled. This is sometimes due to the disc. (It may not be up
to industry standards.)
These symptoms are caused by the discs, not by the
malfunction of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
10
Front View
D
A
B
C
E
F G H I J
VHS/HDD/DVD
SELECT
STANDBY/ ON
S-VIDEO
VHS
–
HDD
–
DVD
–
VIDEO (MONO)L–AUDIO–R
DV IN
PR
DISPLAY
VHS
REC MODE
HDD/DVD
F–1
HDD/DVD
K L
M
O
P
U
X
A Eject Button (M) (VHS) A pg. 41
B Cassette Loading Slot
VHS Recording Lamp (R) A pg. 44
D HDD Lamp (HDD) A pg. 20, 37
A pg. 70
M Video/Audio Input Connectors
O Front Display Panel A pg. 12
E Open/Close Button (M) (DVD) A pg. 8
F VHS/HDD/DVD Select Button (VHS/HDD/DVD SELECT)
T Recording Mode Button (REC MODE) A pg. 34, 37, 44
U Play Button (I) A pg. 24, 39
mode.
H Disc Tray
I Reverse Search Button (O) (HDD & DVD deck) A pg. 25,
47
V Record Button (R) A pg. 34, 37
W Pause Button (W) A pg. 24, 39
X DV Input connector [DV IN (A*)] (HDD & DVD deck only)
A pg. 68
Rewind Button (O) (VHS deck) A pg. 41, 42
J Forward Search Button (N) (HDD & DVD deck) A pg. 25,
47
* A (i.Link) refers to the IEEE1394-1995 industry specification and
extensions thereof. The A logo is used for products compliant with the
i.Link standard.
Fast Forward Button (N) (VHS deck) A pg. 41, 42
To access covered connectors, pull
and open the connector cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
11
Rear View
G
F
A
B
C
D
E
HDD/DVD/VHS
HDD/DVD
L-1
AUDIO OUT
IN/OUT
Y
IN
LEFT
PB
RIGHT
P
R
OUT
COMPONENT
VIDEO OUT
ANTENNA
DIGITAL
AUDIO OUT
PCM/
IN/DECODER
L-2
STREAM
SAT CONTROL
COAXIAL
OPTICAL
HDD/DVD
K
H
I
A Region Number Label A pg. 6
B AC Power Cord A pg. 16
C Cooling Fan
● This prevents the temperature from rising inside the unit.
Do not remove it.
VIDEO OUT (Y/PB/PR)] A pg. 16
● This component video output enables you to watch the images
on the VHS deck in Progressive scan mode, refer to AVHS
F L-1 Input/Output Connector [L-1 IN/OUT] A pg. 16, 71, 76,
● The unit may become hot when it is turned off, as the cooling
fan on the rear of the unit is not activated. However, the cooling
fan may be activated in the following cases;
mode (A pg. 53), slightly before the starting time of VPS/
PDC recording (A pg. 50).
^ If you connect the decoder or satellite receiver to [L-2 IN/
ASAT VIDEOB or ASAT S-VIDEOB. (A pg. 72)
^ When AJUST CLOCKB is set to AONB (A pg. 86)
(Set AJUST CLOCKB to AOFFB if you mind the noise of the
fan.)
77
G Antenna Input Connector [ANTENNA IN] A pg. 16
[DIGITAL AUDIO OUT (OPTICAL/COAXIAL)] (HDD & DVD
deck only) A pg. 73, 77
I Satellite Control Connector [SAT CONTROL] (HDD & DVD
deck only) A pg. 22
J L-2 Input/Decoder Connector [L-2 IN/DECODER] A pg. 22,
71, 76, 77
K Antenna Output Connector [ANTENNA OUT] A pg. 16
D Audio Output Connectors [AUDIO OUT (LEFT/RIGHT)]
A pg. 73, 77
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
12
Front Display Panel
L
M
A B
C
D
E F G
H
I
J
K
N
VPS/PDC
LPCM
FR
XP SP LP EP
VR + RW VCD
-
-
VHS HDD DVD
U
P
Q
R
V
S
T
O
A VIDEO Indicator (z) A pg. 35, 38, 44
J Track/Chapter Indicator (TRK/CHAP)
Lights when VIDEO mode is selected by pressing TV AV/
VIDEO. Lights off when TV mode is selected.
B Disc Type Indicator
ATRKB or ACHAPB lights depending on a disc loaded while the
the numbers explained below.
When a disc is loaded, the type of the disc is indicated.
Disc Status Indicator
When a disc is running, the disc marks rotate.
During High-Speed Search:
ATRKB: Total number of tracks or track number being played
back are displayed on the Multi Display.
the Multi Display.
Rotate faster than normal playback.
During Slow Motion:
Rotate slower than normal playback.
While recording:
Inner red ring lights in the same way as normal playback.
During Instant Timer Recording (ITR), inner red ring slowly
blinks.
K Simulated Surround Effect Indicator (3D) A pg. 31
the on-screen bar.
L Random/Programme Playback Mode Indicator (RND/
PRGM) A pg. 32
ARNDB: Lights when Random Playback mode is set.
APRGMB: Lights when Programme Playback mode is set.
M Repeat Mode Indicator (x/1/A-B) A pg. 30
Select Repeat Playback mode on the on-screen bar.
While paused:
Disc marks blink when either recording or playing back.
While stopped:
While resume stopped:
While the disc tray opened: Disc marks all light out.
No disc on the disc tray: Disc marks all light out.
VR Mode Indicator (VR) A pg. 87
Disc marks all blink.
AxB:
Ax1B:
Whole disc is played back repeatedly.
A single title/chapter/track is played back
repeatedly.
AxA-BB: The selected part (A-B) is played back repeatedly.
Lights when a DVD-RW disc is formatted in VR mode.
C VPS/PDC Indicator A pg. 50
Appears when checking if the station being received transmits a
VPS/PDC signal.
D Linear PCM Indicator (LPCM)
N VPS/PDC Recording Indicator A pg. 50
Lights when VPS/PDC recording function is activated.
O VHS Indicator
Lights when VHS mode has been selected, during recording or
when tapes recorded in VHS format are played back.
No display: Indicates that interlace mode is engaged.
Lights when AXP MODE REC AUDIOB is set to ALINEAR PCMB
(A pg. 79) for recording with HDD, DVD-RAM, DVD-R and
DVD-RW discs, and when Linear PCM audio is played.
E Cassette Loaded Mark (u)
Indicates the present of a cassette in the VHS deck.
Lights when a cassette is loaded into the VHS deck. Blinks
when the end of the tape has been reached during timer
recording, or when the unit is in timer recording standby mode
with a cassette without record safety tab inserted.
F VHS Timer Indicator (j) A pg. 54
Lights when the VHS deck is in the timer recording standby
mode or when timer recording is in progress.
G Recording Mode Indicator (XP/SP/LP/EP/FR) A pg. 34
Blinks when recording mode is being set.
q:
Indicates that progressive mode is engaged.
(Example) q lights when video output mode is in progressive
mode.
A pg. 53
Lights when the HDD deck is in the Auto Satellite Programme
Recording standby mode.
R Group/Title Number Display
S Track/Chapter Number Display
T Remaining Time/Elapsed Time Indicator A pg. 27, 35
Lights when remaining time of HDD, DVD-RAM, DVD-R and
DVD-RW discs is displayed, and lights out when elapsed time
is displayed.
While AFRB is blinking, the left 3 digits of the Multi Display (R
S) indicate setting values ranging from A60B to A480B. After the
value has been set, only AFRB lights.
The right 6 digits of the Multi Display (U) indicate elapsed or
remaining time of each track.
H Group/Title Indicator (GRP/TITLE)
No display: Indicates elapsed time of the disc.
Displayed: Indicates remaining time of the disc.
U Remaining Time/Elapsed Time Display A pg. 27, 35
V Multi Display
AGRPB or ATITLEB lights depending on a disc loaded while the
left 2 digits of the Multi Display (R) indicate the numbers
explained below.
AGRPB: Total number of groups or group number being played
back are displayed on the Multi Display.
ATITLEB: Total number of titles or title number being played
back are displayed on the Multi Display.
Displays clock, received channel, elapsed time, and remaining
time.
Also displays status of the unit (NO DISC/OPEN/CLOSE/
READING).
I Channel Indicator
Indicates the channel received.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
Remain Button (REMAIN) A pg. 27, 35
R Display Button (DISPLAY) A pg. 27, 35
S VHS Timer Button (VHSj) A pg. 54
Remote Control
CABLE/SAT
TV DVD
W
X
A
STANDBY/ON
V Subtitle Button (SUBTITLE) A pg. 28
W TV/CABLE/SAT/DVD switch A pg. 20
X DVD STANDBY/ON Button (DVDA)
A pg. 74
DVD
TV AV
TV/CBL/SAT
TV
B
C
D
VIDEO
Y
Z
VHS
HDD
DVD
TV
Z DVD Button* A pg. 24
a TV Volume Buttons (TV8 +/–) A pg. 74
c Memo Button (MEMO) A pg. 58, 61
Mark Button (MARK) A pg. 27
e Edit Button (EDIT) A pg. 58
g Enter Button (ENTER) A pg. 20
h Return Button (RETURN) A pg. 28, 30, 49
Next Button (NEXT) A pg. 28
a
E
PR
b
c
CANCEL
LIVE
AUX
MEMO/MARK
F
G
DUBBING
EDIT PROGRAMME
NAVIGATION
H
I
d
e
TOP MENU
MENU
f
J
K
47
ENTER
k Play Button (I) A pg. 24, 39
g
h
i
RETURN
L
Select Button (SELECT) A pg. 63
PREVIOUS
SLOW
NEXT
SLOW
l Pause Button (W) A pg. 24, 39
M
N
O
P
m Stop Button (o) A pg. 24, 39
PLAY/SELECT
j
n Skip Search Button (v) A pg. 26, 47
p One Touch Replay Button (w) A pg. 47
r Automatic Satellite Programme Recording Button (SATj)
A pg. 53
k
l
m
CLEAR
REC
PAUSE
STOP/
JUMP
n
o
p
REC MODE
REMAIN
DISPLAY
ON SCREEN
SET UP
Q
R
s Progressive Scan Button (PROGRESSIVE SCAN) A pg. 43,
89
t Angle Button (ANGLE) (DVD deck only) A pg. 27
Live Check Button (LIVE CHECK) A pg. 47
q
VPS/PDC
SUBTITLE
VHS
SAT
S
T
U
r
How To Use
PROGRESSIVE
AUDIO
Before use, insert two R6 size batteries into the remote control
with the polarity (F and G) matched correctly as indicated on
the battery compartment or on the lid.
s
t
V
The remote control can operate most of your unit’s functions, as
well as basic functions of TV sets and satellite receivers and
other brands. (A pg. 74)
● Point the remote control toward the receiving window.
● The maximum operating distance of the remote control is
about 8 m.
C VHS Button* A pg. 41
* This button will not function during navigation mode or set up mode.
D HDD Button* A pg. 37
NOTE:
If the remote control doesn’t work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
E Number Keys A pg. 34, 37
G Auxiliary Button (AUX) A pg. 51, 83
H Live Button (LIVE) A pg. 47
I Dubbing Button (DUBBING) A pg. 64
K FGD E Buttons A pg. 17
L Menu Button (MENU) A pg. 25
N Reverse Search Button (O) (HDD & DVD deck) A pg. 25,
47
Rewind Button (O) (VHS deck) A pg. 41
Reverse Slow Button (SLOW –) A pg. 26
O Record Button (R) A pg. 34, 37
P Jump Button (JUMP +/–) A pg. 40
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
14
When pressing REC MODE
On-Screen Display (HDD & DVD deck)
When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the
remote control is pressed, various operational indicators appear on
the TV screen. To clear the operational indicators, press
ON SCREEN twice.
(Appears for eight seconds.)
7: 00
10: 00
20: 00
28: 00
36: 00
XP
SP
LP
EP
FR480
When playing back a recorded title
HDD
A Remaining disc time for each recording speed
B Recording speed
0:00
1:00
2:00 01:16:48
FR360
Digital
When pressing R during recording
FISHING WORLD
ITR
2 : 30
A Title start
B Current playback point
C Title end
A Recording time for Instant Timer Recording (ITR) mode
D Elapsed playing time
E Play mode
F Name of title currently being played back
G Time scale (This title is an hour and a half long.)
H Audio mode
When using Live Memory playback
HDD
11:00
12:00
13:00
11:35
11:33
PR.12
DVD
FR360
TITLE99 CHAPTER999 T. REMAIN6:59:59
Digital
XP
DVD
FISHING WORLD
TITLE99 CHAPTER999 T. REMAIN6:59:59
11:35
11:33
RAM
PR.12
A Playback title number
B Playback chapter number
C Disc remaining time
D Current status (playback)
E Audio mode
FR360
A Time scale for recording (HDD deck)
Bar meter for recording (DVD deck)
B Current recording point
C Recording mode
D Current time
F Bar meter
G Name of title (or play list) currently being played back
H Current playback point
I Recorded mode
E Current playback channel position number
When recording
HDD
F Time scale for Live Memory Playback (HDD deck)
Bar meter for Live Memory Playback (DVD deck)
G Current playback point
H Live Memory playback mode
I Current playback time
11:00
12:00
13:00
11:35
PR.12
FR360
LIVE
DVD
TITLE99 CHAPTER999 T. REMAIN6:59:59
11:35
RAM
PR.12
FR360
LIVE
A Recording point
B Current status (recording)
C Current time
D Recording channel number
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
15
On-Screen Display (DV Dubbing)
On-Screen Display (VHS deck)
When AO.S.D.B is set to AAUTOB and ON SCREEN on the remote
control is pressed, various operational indicators appear on the TV
screen. To clear the operational indicators, press ON SCREEN
again.
When capturing images from the external DV
equipment
0:00
FR360 00:00:00. 00
12bit
1:00
2:00
DV
HDD
GR-DV3500
M
N
00:00:00. 00
DV
JVC
GR-DV3500
SOUND1
A
B
C
D
W
S P
R
L
K
P R . 1 A R D
u
2 1
2 4
:
.
0
1 2
0
A Recording speed
.
0 4
B HDD capacity graph
C HDD time counter
D Recording time scale
E HDD mode
F Remote control mode
G Connected DV equipment mode
J
I
S T
V P S
/
P D C
O
N
M A R K
E
- - - - - + - - - + - - - - + - - - - - +
0
I
o
H
G
-
H
F
I
1
N
:
2 3
1
:
:
4 5
0 0
N O R M
R E M A
I
F
H Connected DV equipment model information
I Input channel
J Sound mode
A Operation Mode Indicators
B Tape Speed (SP/LP)
C Tape Direction
D Index Mark Indicator (MARK) A pg. 42
E Counter Display
K Sound input bit-rate*
* Indicates the sound bit-rate of the connected DV equipment
L Connected DV equipment information*
F Tape Remaining Time Indicator A pg. 45
H Tape Position Indicator
* Maker name and model name, etc. may not appear depending on the
connected equipment.
M Time counter for the connected DV equipment
N Sound monitor mode
The tape position indicator
appears on the TV screen when
you press O or N from the
Stop mode or perform an Index
Search. (A pg. 43) The position
of AZB in relation to A0B
(Beginning) or A+B (End) shows
you where you are on the tape.
1
2
DV
DV
N
----- + - o -- + ---- + ----- +
0
O Remote control switch
P Auto capture button
Q Sound monitor switch
1 : 2 3
R E MA I N
:
:
4 5
3 5
2
End
NOTE:
Depending on the type of tape
being used, the tape position
indicator may not appear
correctly.
179 :59 :59
I VPS/PDC Indicator A pg. 55
J Type of Broadcast A pg. 45
K Current Day/Month/Year
L Clock Display
R Elapsed recording time
M Channel Position Number and Station Name/Auxiliary Input
Indicator (L-1, L-2, F-1 or SAT*)
* When AL-2 SELECTB is set to ASATB (A pg. 72), ASATB appears
instead of AL-2B.
N ACassette LoadedB Mark
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR NEW UNIT
EN
16
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
OPERATION CAN BE PERFORMED.
Basic Connections
1 Make sure the package contains all of the accessories listed in
ASPECIFICATIONSB (A pg. 94).
2 Place the unit on a stable, horizontal surface.
3 Connect the unit to a TV depending on the TV and cables you
use.
8 Basic Connection
TV aerial cable
To connect to a TV with 21-pin SCART input connector ^
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the [ANTENNA IN] connector on
the rear panel of the unit.
C Connect the [ANTENNA OUT] connector on the rear panel of
the unit and the TV’s aerial connector with the supplied RF
cable.
Mains outlet
To [ANTENNA IN]
D Connect the [L-1 IN/OUT] connector on the rear panel of the
unit and the TV’s 21-pin SCART connector with a supplied 21-
pin SCART cable.
● The [L-1 IN/OUT] connector accepts and delivers either a
signal.
Mains power cord
Back of unit
● Set your TV to the VIDEO (or AV), Y/C, or RGB mode
according to the type of your TV’s SCART connector.
8 Component Video Connection
To connect to TV’s component video input connectors ^
A Perform A – C in ABasic ConnectionB.
To [L-1 IN/
OUT]
To [COMPONENT
To [AUDIO
VIDEO OUT (Y/PB
/
OUT]
P
R)]
To
[ANTENNA
OUT]
B Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]
connectors to the TV’s component video input connectors.
C Connect the unit’s [AUDIO OUT] connectors to the TV’s AUDIO
input connectors.
Component
video cable
(not supplied)
● If your TV is not stereo-capable, use the unit’s [AUDIO OUT]
connectors to connect to an audio amplifier for Hi-Fi stereo
21-pin SCART
cable
(supplied)
Audio cable
(not supplied)
● By using the component video connection, you can view the
images in the progressive mode. For switching to the
● You can also watch the images on the VHS deck in Progressive
scan mode via the component video output, refer to AVHS
Progressive ScanB (A pg. 43).
RF cable
(supplied)
TV
NOTE:
Select an appropriate option of AL-1 OUTPUTB as follows
(A pg. 72):
To 75 ohm
terminal
When your TV’s SCART
Set AL-1 OUTPUTB to:
connector accepts:
It’s essential that your unit be properly connected.
Composite signals
ASCART VIDEOB
ATTENTION:
● Your TV must have a 21-pin AV input connector (SCART) for
the basic connection to the unit.
Y/C signal (separated
luminance (brightness) and
chrominance (colour) signals)
ASCART S-VIDEOB
● Connect the AC plug only after all connections to the TV has
been completed.
RGB signal
ASCART RGBB
Component video signal
ACOMPONENTB
When the setting selected is not in accordance with the TV
connected and depending on the type of appliance connected to
the unit, the correct picture will not appear.
4 Plug the end of the mains power cord into a mains outlet.
● ALOADINGB blinks on the front display panel when the AC plug
of the mains power cord is connected into a mains outlet and it
takes approximately 50 seconds for the unit to be turned on.
This is not a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
17
3 Press FGD E to select the
language of your choice, then
press ENTER. The AUTO SET/
T-V LINK display appears on the
TV screen.
INITIAL SET UP > LANGUAGE SELECT
Auto Set Up
Auto Channel Set/Auto Clock Set/Auto Guide
Programme Number Set
ENGLISH
ITALIANO
SVENSKA
DANSK
DEUTSCH
ESPAÑOL
NORSK
FRANCAIS
NEDERLANDS
SUOMI
RETURN
4 Press D E to select AAUTO
SETB, then press ENTER. The
AUTO SET screen will appear.
● When AUTO SET is completed,
ASCAN COMPLETEDB appears
on the TV screen. After selecting
AOKB, APLEASE WAIT...B
ENTER
SELECT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
After the A button on the unit (or DVD A on the remote
control) is pressed for the first time to turn on the unit, by simply
selecting your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Programme numbers automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
* If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN), set the clock manually.
INITIAL SET UP > AUTO CH SET
AUTO SET
T-V LINK
appears on the screen while
channel data is being
transferred to the VHS deck.
During this period
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SELECT
(approximately 80 seconds), the
VHS deck is not operable. It will
exit the AUTO SET mode once
APLEASE WAIT...B disappears
from the screen.
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
1
SELECT
ATTENTION:
CABLE/SAT
TV
DVD
on the unit or remote control until the front display panel shows
A– –:– –B as illustrated on page 19.
● When you have connected the unit to a TV offering T-V Link via a
fully-wired 21-pin SCART cable (A pg. 16) and the TV is turned
on, the unit automatically performs the Preset Download
(A pg. 18) even if you select AAUTO SETB for Auto Set Up
function.
DVD 1
ATTENTION:
ENTER
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
unit will not perform Auto Set Up again. The unit only performs
If you have moved to a different area, perform each setting as
required.
rtwe
● Tuner setting (A pg. 83)
● Clock setting (A pg. 86)
If a new station starts broadcasting in your area, perform tuner
setting. (A pg. 83)
NOTES:
● In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
● If there is a power cut, or if you press A or SET UP while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure to
turn off the unit power once and try again from step 1.
reception condition.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a mains
outlet.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 85,
AINFORMATIONB)
1 Press A on the unit or DVD A on the remote control to turn
on the unit. The Country Set display appears on the TV screen.
2 Press FGD E to select your
INITIAL SET UP > AREA SELECT
country’s name, then press
BELGIUM
DEUTSCHLAND
ITALIA
ČESKÁ REPUBLIKA
ESPAÑA
DANMARK
GREECE
ENTER. The Language Set
display appears on the TV
screen.
After AAuto Set UpB is completed, perform AMonitor SetB on
page 21.
MAGYARORSZÁG
ÖSTERREICH
SUISSE
NEDERLAND
POLSKA
NORGE
SUOMI
PORTUGAL
SVERIGE
OTHER WESTERN
OTHER EASTERN
RETURN
NOTES:
ENTER
SET UP
EXIT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
● If you have selected ABELGIUMB
or ASUISSEB, go to step 3.
● If you have selected
SELECT
AMAGYARORSZÁGB, AČESKÁ REPUBLIKAB, APOLSKAB or
AOTHER EASTERNB, press ENTER. The Clock Set screen
appears. Set the clock manually (A pg. 86), then go to step 4.
● If you have selected any other country name, go to step 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
18
If you have connected the unit to your TV via a 21-pin SCART
Download instead of the Auto Set Up in step 4 on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
Preset Download
Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Programme Number Set
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Perform steps 1 to 3 of AAuto Set UpB (A pg. 17) before
continuing.
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
1 Press D E to select AT-V LINKB
INITIAL SET UP > AUTO CH SET
and press ENTER. The T-V
LINK screen will appear.
AUTO SET
T-V LINK
● When T-V LINK is completed,
ASCAN COMPLETEDB appears
on the TV screen. After selecting
AOKB, APLEASE WAIT...B
appears on the screen while
channel data is being
CABLE/SAT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
TV
DVD
SELECT
INITIAL SET UP > T-V LINK
transferred to the VHS deck.
During this period
(approximately 80 seconds), the
VHS deck is not operable. It will
exit the T-V LINK mode once
APLEASE WAIT...B disappears
from the screen.
T-V LINK
PLEASE WAIT...
CANCEL
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SELECT
ENTER
we
ATTENTION:
Preset positions on the front display panel increase from APR 1B;
do NOT press any button on the unit or remote control until the
front display panel shows clock time, APR 1B or A– –:– –B as
illustrated on page 19.
● If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
● For details, refer to the instruction manual of your TV.
● In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
● If there is a power cut, or if you press A or SET UP while
downloading or set up is in progress, it will be interrupted; be
sure to turn off the unit power once and try again from the
beginning.
reception condition.
● On this unit, the characters available for station names (ID) are
A–Z, 0–9, –, Z, + and & (space). Some names of downloaded
stations may differ from those of your TV. (A pg. 85)
After APreset DownloadB is completed, perform AMonitor SetB on
page 21.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
19
INFORMATION
Results Of Auto Set Up/Preset Download Appearing
On The Front Display Panel
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-
screen display depending on the Country setting you have made in
step 2 on page 17 (unless you have selected ABELGIUMB or
ASUISSEB), as shown below.
If both Auto Channel Set and
Auto Clock Set have been
performed successfully, the
SUOMI
B SUOMI
ITALIA
B ITALIANO
correct current time is displayed.
Turn on the TV and select its AV mode, then make sure that all
necessary stations have been stored in the unit’s memory by using
the PR +/– button(s).
unit’s memory, the station name will be displayed at the top right
corner of the TV screen for about 5 seconds when the unit is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 84 – 85.
PORTUGAL
B ENGLISH
MAGYARORSZÁG B ENGLISH
DEUTSCHLAND B DEUTSCH
ESPAÑA
B ESPAÑOL
POLSKA
B ENGLISH
B NORSK
NEDERLAND
GREECE
B NEDERLANDS
B ENGLISH
NORGE
SVERIGE
DANMARK
ÖSTERREICH
B DANSK
B DEUTSCH
B ENGLISH
OTHER EASTERN B ENGLISH
ČESKÁ
REPUBLIKA
screen Language SetB (A pg. 20).
If Auto Channel Set has
succeeded but Auto Clock Set
has not, APR 1B (channel
position) is displayed.
Just Clock
Your unit is equipped with the Just Clock function which provides
intervals, by reading data from a PDC signal. If you want to take
advantage of this function, simply set it to AONB. (A pg. 86)
OR
If both Auto Channel Set and Auto Clock Set have failed,
A– –:– –B is displayed.
A Turn on the TV and select its AV mode, then make sure that all
necessary stations have been stored in the unit’s memory by
using the PR +/– button(s).
right corner of the TV screen for about 5 seconds when the unit
is tuned to a different station.
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (A pg. 16), the following functions are available.
You can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree
of compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you start playback.
B Perform AClock SetB (A pg. 86).
ATTENTION:
For details, refer to the instruction manual of your TV.
After making sure the cables are connected properly, turn off the
The Country Set display appears on the TV screen; perform AAuto
Set UpB (A pg. 17) or APreset DownloadB (A pg. 18) again.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.
IMPORTANT:
Direct Rec
● To check if the Guide Programme numbers have been set
correctly, perform the a Timer Programming.
(A pg. 49, 54)
You can easily start recording the programme that you are
watching on your TV. When you use this function, set ADIRECT
RECB to AONB. (A pg. 79)
● In certain reception conditions, station names may not be stored
properly. If the Guide Programme numbers are not set properly
when you timer-record a TV programme using the a
system, the unit will record a TV programme of a different
station. When programming the timer using the a
system, be sure to check the desired channel is selected
correctly. (A pg. 49, 54)
● Your unit memorizes all detected stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture. (A pg. 85, ADelete A ChannelB)
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
20
On-screen Language Set
This unit offers you the choice to view on-screen messages in 10
different languages.
Language
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press D E to select AFUNCTION SET UPB, then press G.
4 Press D E to select ADISPLAY
CABLE/SAT
TV
DVD
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
SETB, then press G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
HDD
DVD
SUPERIMPOSE
BLUE BACK
DIMMER
AUTO
5 Press F G to select AON
SCREEN LANGUAGEB, then
press ENTER.
ON
BRIGHT
OFF
POWER SAVE
ON SCREEN LANGUAGE
ENGLISH
6 Press F G to select your desired
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
language, then press ENTER.
SELECT
7 Press SET UP to complete the
setting.
ENTER
rtwe
Menu/Audio/Subtitle Language Set (DVD deck only)
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
● The procedure shows how to set AMENU LANGUAGEB as an
example.
SET UP
1 Press DVD so that the DVD lamp lights up on the unit.
2 Press SET UP to access the Main Menu screen.
3 Press D E to select ADVD VIDEO SET UPB, then press G.
4 Press D E to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
ALANGUAGE SETB, then press
G.
LANGUAGE SET
AUDIO OUTPUT
PARENTAL LOCK DISC PLAY SET UP
ENGLISH
ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE
5 Press F G to select AMENU
LANGUAGEB, then press
ENTER.
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
6 Press F G to select your desired
SELECT
language, then press ENTER.
● See ALanguage Code ListB (A pg. 95).
7 Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc’s
default menu language is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
21
1 Press DVD so that the DVD lamp lights up on the unit.
2 Press SET UP to access the Main Menu screen.
Monitor Set
● You cannot set the monitor type during recording or playback.
3 Press D E to select AFUNCTION SET UPB, then press G.
4 Press D E to select AVIDEO IN/
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
OUTB, then press G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
4:3LB
VIDEO
5 Press F G to select AMONITOR
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
TYPEB, then press ENTER.
SCART VIDEO
VIDEO
6 Press F G to select the desired
option, then press ENTER.
CABLE/SAT
VIDEO
TV
DVD
ENTER
SELECT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
7 Press SET UP to complete the
setting.
DVD
* The boldface settings below indicate the settings at your purchase.
8 MONITOR TYPE - 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
4:3LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
ENTER
rtwe
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO (Wide television conversion):
SET UP
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image, APan&ScanB (PS) and
ALetter BoxB (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
● The picture will be shown in the A4:3LBB
mode depending on the disc even if the
A4:3PSB mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT CONTROL SET
EN
22
The following procedure is required if you receive satellite
channels through a satellite receiver. Approximately 20 seconds
before the a timer programming (A pg. 49) or Manual
Timer programming (A pg. 51) starts, the unit sets its input mode
to AL-2B and automatically switches the satellite receiver’s channels
using the provided Satellite Controller.
Satellite Receiver Control Setting
(HDD & DVD Deck Only)
Satellite receiver
Installing Satellite Controller
1 Place the Satellite Controller so that the path between its
transmitter and the satellite receiver’s remote sensor is
unobstructed.
2 Fix securely using the adhesive strip attached on the back of
the Satellite Controller.
3 Be sure to connect the unit’s [L-2 IN/DECODER] connector to
the satellite receiver’s 21-pin SCART connector.
NOTE:
Satellite Controller
When connecting your satellite receiver, refer to its instruction
manual.
(provided)
(suggested locations)
Your unit
4 Connect the Satellite Controller to the [SAT CONTROL]
connector on the rear panel.
Transmitter
Setting Satellite Receiver’s Brand And Channel
Satellite receiver
After installation, set the satellite receiver’s brand and channel
correctly; otherwise, the Satellite Controller cannot work correctly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
1 Turn on the satellite receiver’s power.
2 Press HDD or DVD so that the HDD or DVD lamp lights up on
21-pin SCART cable
(supplied)
Satellite Controller (supplied)
To [SAT CONTROL]
the unit.
3 Press SET UP to access the Main Menu screen.
4 Press D E to select AINITIAL SET UPB, then press G.
5 Press D E to select ATUNER
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
SETB, then press G.
TUNER SET
CLOCK SET
To [L-2 IN/
DECODER]
AUTO CH SET
MANUAL CH SET
6 Press FGD E to select ASAT
CONTROL SETB, then press
ENTER.
SAT CONTROL SET
GUIDE PROG SET
11
12
13
7 Press F G to select ABRANDB,
SET UP
EXIT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
then press ENTER.
SELECT
8 Press F G to select the brand
Back of unit
code from the list on page 23, then press ENTER.
● If the unit is in playback or recording mode, you cannot set the
brand code.
CABLE/SAT
TV
DVD
9 Press F G to select APROGRAMMEB, then press ENTER.
10Press F G to select one of the channel positions on the
HDD
DVD
satellite receiver, then press ENTER.
● You can select the channel position between 1 to 999.
11Press F G to select ATESTB,
INITIAL SET UP > SAT CONTROL SET
then press ENTER. The unit
BRAND
73
12
enters the Test mode.
PROGRAMME
ENTER
TEST
rtwe
ENTER
SELECT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SET UP
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT CONTROL SET
EN
23
12Check the result of the test.
If the satellite receiver’s channel number has been changed to
the same one as you set in step 10
Press D E to select AYESB, then press ENTER to finish the Sat
Control Set mode.
If the satellite receiver’s channel number has not been
changed correctly
Press D E to select ANOB, then press ENTER. Then perform the
procedure again from step 7.
BRAND NAME
CODE
JVC
73
AMSTRAD
ASTON
60, 61, 62, 63, 92
97
CANAL SATELLITE
CANAL +
D-BOX
81
81
85
ECHOSTAR (VIA DIGITAL)
FINLUX
82
68
FORCE
89
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
88
64, 65, 102
64, 78, 99
88
ITT NOKIA
JERROLD
KATHREIN
LUXOR
68
75
70, 71, 96
68
MASCOM
MASPRO
NOKIA
93
70
87, 94
PACE
65, 67, 74, 86, 92, 97
PANASONIC
PHILIPS
RADIX
74, 92
66, 84, 101
78
RFT
69
SABA
97
SAGEM
83, 90
68
83
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
64
69, 98
66, 100
97
83
TRIAX
91
WISI
64
NOTES:
● The Satellite Controller may not work with all types of satellite
receiver.
● For some satellite receivers, you need to set its channel input
mode to 2-digit.
● If your satellite receiver has more than two channel modes, be
sure to set to AAll Channel ModeB. For details, refer to the
instruction manual of the satellite receiver.
● When selecting the satellite receiver’s channel (A step 10),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the unit’s infrared beam receiving
window as possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
24
To play back an MP3/JPEG disc, see APlayback With MP3/WMA/
JPEG NavigationB (A pg. 63).
Basic Playback
1 Load a disc.
● For details, refer to APlacing A DiscB (A pg. 8).
● Pressing I also closes the disc tray.
● Playback begins automatically if an auto-playback DVD disc is
loaded.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or DVD
on the remote so that the DVD lamp lights up on the unit.
3 Press I to start playback.
VHS/HDD/DVD
● If you load a DVD disc whose region code does not match the
unit, AREGION CODE ERRORB appears on the TV screen. For
details, refer to ARegion NumberB (A pg. 6).
I
M
SELECT
discs, the menu display may appear on the TV screen after
play back from the menu. Otherwise, the playback cannot go
forward. Refer to APlayback Control (PBC) FunctionB (A pg. 28)
or ALocating A Desired Scene Using The DVD MenuB
(A pg. 25).
o
W
CABLE/SAT
TV
DVD
● The Library Database Navigation also enables you to search
and select the desired titles. (A pg. 58)
DVD
4 Press W to pause playback.
● To resume normal playback, press I.
5 Press o to stop playback.
● When a recordable disc is played, playback stops and a
programme received with the unit’s tuner resumes on the TV
screen.
ENTER
● When a playback-only disc is played, playback stops and the
still image at the time you press o remains on the TV screen.
Pressing o again resumes a programme received with the
unit’s tuner.
● If M is pressed during playback, playback stops, then the disc
tray opens.
I
o
W
NOTES:
● When the Library Database Navigation screen appears, choose
a thumbnail image of the desired title on the TV screen, then
press ENTER. (A pg. 58)
● It is not possible to playback the DVD disc recorded in 96 kHz on
DVD during recording or Live Memory Playback on HDD.
ATTENTION:
● It takes approximately 30 seconds to read a disc depending on
the type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
● It may take a few seconds to start playback. This is not a
malfunction.
● Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
25
Locating The Start Point Of The Item Or Skip The Item
Playback Features
● Turn on the unit.
Press S or T during playback.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
● Pressing T locates the start point of the item or skips the item
in the forward direction, then resumes playback.
● Pressing S locates the start point of the item or skips the item
in the reverse direction, then resumes playback.
CABLE/SAT
TV
DVD
When a DVD-RAM/RW/R disc is played
Current programme
DVD
0-9
Previous
programme
Next
programme
News
Drama
Movie
TOP MENU
ENTER
FGDE
T
Reverse
● : marked points (A pg. 27)
Forward
MENU
S
I
Example:
5/SLOW +
W
v
O/SLOW
-
To locate the beginning of the next item, press T once.
To locate the beginning of the current item, press S once.
To locate the beginning of the previous item, press S three
times.
o
JUMP
-
JUMP +
When a DVD VIDEO, Audio CD or Video CD/SVCD disc is
played
Playback point
Locating A Desired Scene Using The DVD Menu
Scene 3
(Chapter 3)
or
Scene 4
(Chapter 4)
or
Scene 2
(Chapter 2)
or
DVD VIDEO discs may have top menu and disc menu.
Track 3
Track 4
Track 2
Top menu
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Forward
Reverse
Example:
To locate the beginning of the next item, press T once.
To locate the beginning of the current item, press S once.
Disc menu
Disc menus include playback data (angle menu, subtitle menu,
etc.) specific to each title.
Press MENU to access the disc menu.
Variable Speed Search
1 Press TOP MENU or MENU to
access the DVD menu.
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
2 Press FGD E to select a
desired title, then press
ENTER. Playback starts.
● It may be possible to select the
desired item using the number
keys depending on the menu
● To resume normal playback, press I.
For Audio CD
display.
Example:
You can perform 4 levels of speed search with N and O. (Audio
is active also during variable speed search.) You cannot perform
slow motion for each direction.
NOTE:
When A7B appears on the TV screen in step 1, the disc does not
have a top menu or disc menu.
Reverse
O
N
Forward
Reverse
SlowMotion
3 steps
Reverse Search
4 steps
Reverse
Play
Slow Motion
3 steps
Normal Forward Search
Play
4 steps
1
-
116
-
½
-
60
-60 -15 -5 -3
-1
1
3
5
15
½
¼
¼
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
26
Still Picture/Frame-By-Frame Playback
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
● Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
(A pg. 79)
● Resume function always works for DVD-RAM regardless of the
setting of ARESUMEB.
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-
frame playback.
● Each press of SLOW – (O) or SLOW + (N) advances/
reverses the still picture frame by frame.
● Frame-by-frame playback for reverse direction cannot be
performed with Video CD/SVCD discs.
● To resume normal playback, press I.
1 Press o during playback to memorise a resume point.
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorising.)
Slow Motion
● The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 79)
● To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When ARESUMEB is set to AONB:
• Press A to turn off the unit.
• Press M to take out the disc.
• Press o in stop mode.
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.
● Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
● Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
• Press TOP MENU to display the top menu, then start playback
Skip Search
by selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
• Set ARESUMEB to AOFFB. (A pg. 79)
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
• Press o in stop mode.
• Press TOP MENU to display the top menu, then start playback
by selecting an item, etc.
Jump Search
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
playback from the resume point.
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 79)
during playback (or Live Memory Playback).
NOTES:
● ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under AONB setting will be applied
even if ARESUMEB is set to ADISC RESUMEB. (A pg. 79)
● If you stop the playback of a disc for which a resume point has
already been memorised, the memory will be updated with the
new resume point.
Press JUMP – or JUMP +.
● To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
● Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
● After the unit has memorised the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
● When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD/SVCDs.
● When ARESUMEB is changed to AONB or AOFFB (A pg. 79),
resume points of the discs memorised with ARESUMEB set to
ADISC RESUMEB will be cleared.
● Resume points are memorised for each side of a double-sided
disc.
● When you switch to HDD during CD playback, playback stops.
The Resume Function doesn’t work when you switch to DVD
thereafter to playback the disc.
● When you cannot advance any further (beginning or end of
programme reached), the message AUNABLE TO GO BACK
ANY MOREB appears on the screen and the on-air screen
resumes. In such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing JUMP – or JUMP + will
result a jump to the scene at the 30 minutes point or 45 minutes point
respectively as illustrated below. At the subsequent press, the scene
will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is
A15 MINB.
Time counter
0 min
40 min
45 min
30 min
1 h 15 min
1 h
15 min
Beginning of programme
Current scene
End of programme
NOTE:
Jump search cannot be performed with finalised DVD-R/DVD-RW
(video mode) discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
27
Checking The Time Information
CABLE/SAT
TV DVD
DVD
You can check time information of a disc on the front display panel
and the TV screen.
0-9
Each press of DISPLAY changes the display as follows:
8 DVD-RAM/DVD-R/DVD-RW
During recording
MARK
Clock time (front display panel only) N Current title elapsed time
N Disc remaining time* N (back to the beginning)
* only discs before finalising
ENTER
rtwe
● Clock time is displayed only when a recordable disc is recorded.
MENU
RETURN
During playback
S/PREVIOUS
T/NEXT
Each title elapsed time N Current title elapsed time N
Disc remaining time* N (back to the beginning)
* only discs before finalising
I
o
REMAIN
DISPLAY
In stop mode or during playback
● It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
SET UP
● In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press F G to select AFRB, then press D E to
select the desired recording time. (A pg. 36)
AUDIO
SUBTITLE
ANGLE
● It is not possible to switch the recording mode during playback or
while recording.
Marking Positions To Play Back Again Later
8 Video CD/SVCD/Audio CD
During playback
Current track elapsed time N Current track remaining time N Total
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position. Marking onto DVD-RAM/RW (VR mode only) discs when
recording is helpful to locate a start point when you play back the
discs later.
In stop mode
0:00 N Playback time of track 1 N 0:00 N Total length of a disc N
(back to the beginning)
NOTE:
When a PBC-compatible Video CD/SVCD disc is loaded,
deactivate the PBC function. (A pg. 28)
To mark positions:
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV screen.
You can easily locate the marked
positions using S or T when
you play back the disc.
Angle Selection
To delete the marked positions:
While paused, press S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains Amulti-angleB parts, where the same scene was shot from
different angles.
If the disc contains Amulti-angleB parts, AyB appears on the TV
screen at the beginning of the Amulti-angleB part.
1 Press ANGLE during
playback. The angle selection
NOTES:
display appears on the TV
When 3 scene angles are
screen.
● When a monaural programme changes to a stereo programme
● Titles will be divided into AchaptersB at the marked points
according to the disc types as follows:
contained.
2 Press ANGLE or D E to select
your desired angle.
● Each time you press ANGLE or D E, the angle changes.
● When A7B appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit
angle selection.
● To clear the angle selection display, press ENTER. In addition,
the angle selection display disappears automatically if no
operation is done for 10 seconds.
DVD-R/RW (Video mode): After finalising, titles are divided into
AchaptersB at the marked points that are marked automatically
approximately every 5 minutes during recording before finalising.
(A pg. 88)
DVD-RW (VR mode): After finalising, titles are divided into
AchaptersB at the marked points that are marked at the desired
locations during playback before finalising. (A pg. 88)
DVD-RAM: Titles are divided into AchaptersB at the marked points
that are marked at the desired locations during playback.
DVD VIDEO: Creating of marked points are not permitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
28
Subtitle Selection
Audio Language/Sound Selection
Some DVD VIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
AhB appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
Some DVD VIDEO discs contain the multiple audio language or
sound. You can select the desired audio language or sound. For
some Video CD/SVCD discs, you can switch the audio channel to
choose Karaoke either with or without the vocal.
1 Press SUBTITLE during
1 Press AUDIO during playback.
For example: DVD VIDEO
ENGLISH
playback. The subtitle
The Audio Language/Sound
selection display appears.
selection display appears on
the TV screen.
● Each time you press
SUBTITLE, the subtitle display
is switched on and off.
When 3 subtitle languages are
contained.
2 Press AUDIO or D E to select
When 3 audio languages are
contained.
your desired audio language/
sound.
● Each time you press AUDIO or D E, the audio language/sound
changes.
● To clear the Audio Language/Sound selection display, press
ENTER.
2 Press D E to select your desired language.
● To clear the subtitle selection display, press ENTER.
NOTES:
● When A7B appears on the TV screen, no subtitle language is
NOTES:
recorded.
● When A7B appears on the TV screen, no audio language is
recorded.
● When the subtitle language won’t be changed with the procedure
above, change the subtitle on a disc menu displayed by pressing
MENU.
● When the audio language won’t be changed with the procedure
above, change the audio on a disc menu displayed by pressing
MENU.
● Pressing AUDIO to select the audio language/sound is only
possible during playback. It is not possible to select by pressing
AUDIO in stop mode. However, you can select the desired audio
language/sound from the setup menu while in stop mode.
Audio Channel Selection
When watching bilingual programmes or playing discs on which
you recorded bilingual or stereo programmes, you can choose the
desired audio channel.
Playback Control (PBC) Function
● When ASUPERIMPOSEB is set to AAUTOB, you can confirm on
the TV screen the audio channel you have chosen. (A pg. 80)
● Each time you press AUDIO, the audio
channel changes.
Some Video CD/SVCD discs support the PBC function. PBC is an
abbreviation of APlay Back ControlB. A Video CD/SVCD disc
recorded with PBC has its own menus, such as a list of the songs
on the disc. You can locate a specific scene by using the menu.
TRACK
USE
On-Screen Display
1 Press I in stop mode. The PBC menu appears.
For main audio of bilingual programme
For sub audio of bilingual programme
For stereo discs
2 Press the number keys to enter the number of the desired
scene. The unit starts playback of the selected item.
● APBCB appears on the front display panel.
● When ANEXTB or APREVIOUSB appears on the TV screen:
Pressing NEXT(T) advances to the next page.
For audio of left channel
Pressing PREVIOUS(S) returns to the previous page.
● You can return to the menu by pressing RETURN.
● The method of the operation is different depending on the disc.
For audio of right channel
NOTE:
It is not possible for DVD-R/DVD-RW (Video mode) disc playback
to switch the audio channel. The audio channel is played back as
set in AVIDEO MODE RECORDING AUDIOB setting. (A pg. 79)
NOTES:
● If you want to playback a PBC-compatible Video CD/SVCD disc
without activating the PBC function, start playback in stop mode
by using the number keys, instead of the I button, to choose the
track, then press ENTER.
programme
● To activate the PBC function when a PBC-compatible Video CD/
SVCD disc is being played back without the PBC function, press
TOP MENU, or press o then press I.
When the unit is connected with a digital audio device using an
optional optical cable and ADIGITAL AUDIO OUTB is set to
ADOLBY DIGITAL/PCMB, it is not possible to switch the audio
channel of a bilingual programme recorded on a DVD-RAM or
DVD-RW (VR mode) disc. (A pg. 77) In this case, perform the
following steps using the remote control to switch ADIGITAL
AUDIO OUTB from ADOLBY DIGITAL/PCMB to APCM ONLYB.
B Press D E to select ADVD VIDEO SET UPB, then press G.
C Press D E to select AAUDIO OUTPUTB, then press G.
D Press F G to select ADIGITAL AUDIO OUTB, then press
ENTER.
One Touch Replay
You can move back the playback position slightly.
Press w.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
E Press F G to select APCM ONLYB, then press ENTER.
(A pg. 78)
F Press SET UP to complete the setting.
G Press AUDIO to select the desired audio channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
29
B Select this for Repeat Playback. (A pg. 29)
C Select this for A-B Repeat Playback. (A pg. 30)
D Select this for search function. (A pg. 30)
E Select this for time search function. (A pg. 31)
Using The On-screen Bar
(A pg. 31)
H Select this to switch picture source type. (A pg. 32)
I Current status area for the selected item.
J Select this for Programme Playback. (A pg. 32)
K Select this for Random Playback. (A pg. 32)
The on-screen bar allows you to control various playback
functions. Some of the functions operated on Navigation Menu can
be controlled on the On-screen bar.
ATTENTION:
The on-screen bar can also be used for the HDD deck.
L Select this to control the switching interval of the slide show.
(A pg. 32)
Be sure to clear Library Database Navigation screen by pressing
NAVIGATION.
NOTE:
Although examples of the on-screen bar are provided here only for
3 types of discs, the on-screen bar will be displayed for whichever
disc indicated in the left column.
CABLE/SAT
TV
DVD
Basic Operation On The On-screen Bar
Example: When selecting Picture Control function of DVD
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar. The
item currently selected is highlighted and pointed by :.
NAVIGATION
rtwe
RETURN
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
ENTER
DVD-
VIDEO
2 Press D E to select A
B, then press ENTER. The pop-up
window appears under the selected item.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
ON SCREEN
DVD-
VIDEO
3 Press F G to select the desired option, then press ENTER.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
How To Access The On-screen Bar
DVD-
VIDEO
1 Press ON SCREEN twice whenever a disc is loaded.
NORMAL
CINEMA
SHARP
SOFT
Contents of the on-screen bar during playback
DVD VIDEO
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
To clear the on-screen bar
Press ON SCREEN.
DVD-
VIDEO
NOTE:
See the corresponding pages for details on each menu item.
Repeat Playback
Video CD/SVCD
TRACK 99
EACH 0:00
CINEMA
You can repeat playback as you like according to the type of disc.
VCD
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select AxB, then press ENTER. The pop-up
window appears under the selected item.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
JPEG disc
GROUP 99 TRACK 99
DVD-
VIDEO
5 SEC.
JPEG
3 Press F G repeatedly to select the desired Repeat mode, then
press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
30
DVD-RAM/RW/R
To cancel A-B Repeat Playback
Press D E to select AA-B xB, then press ENTER.
OFF:
Repeat playback is not performed.
NOTES:
● A-B Repeat Playback may not work properly depending on the
type of disc being used.
ALL REPEAT:
The whole disc is played back repeatedly.
● The subtitles recorded around the A-B point may not appear.
● When the end of the item is reached before the end point is set,
the on-screen bar disappears from the TV screen. In such a
case, repeat the procedure from step 1.
TITLE REPEAT:
The current title is played back repeatedly.
DVD VIDEO
● The point B must be set at least 3 seconds after the point A.
● When playing back a DVD, A-B Repeat Playback is possible only
within the same title.
● AA-BxB cannot be selected during Programme and Random
Playback.
OFF:
Repeat playback is not performed.
TITLE REPEAT:
The current title is played back repeatedly.
CHAPTER REPEAT:
● AA-BxB cannot be selected while stopped.
The current chapter is played back repeatedly.
Locating The Beginning Of A Desired Selection
Audio CD/Video CD/SVCD/JPEG/MP3
OFF:
Repeat playback is not performed.
ALL REPEAT:
You can locate the beginning of a title, chapter, group or track.
During playback or while stopped
The whole disc is played back repeatedly.
TRACK REPEAT*:
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select A9B, then press ENTER.
The current track is played back repeatedly.
* ATRACK REPEATB cannot be selected for JPEG discs.
To clear the on-screen bar
Press ON SCREEN.
3 Press F G to select the desired item, then press ENTER.
● Skip this step for Video CD/SVCD and Audio CD.
To cancel Repeat Playback
Repeat the above procedure from step 1, select AOFFB in step 3,
then press ENTER.
For DVD-RAM/RW/R, DVD VIDEO
ATITLE SEARCHB or ACHAPTER SEARCHB is selectable. (ATITLE
SEARCHB is selectable only while stopped.)
NOTES:
For JPEG, MP3
AGROUP SEARCHB or ATRACK SEARCHB is selectable.
● Repeat Playback is not possible for a Video CD/SVCD with PBC
function.
For Video CD/SVCD, Audio CD
ATRACKB is selectable.
● Repeat Playback may not work properly depending on the type of
the disc being used.
GROUP 99
CHAPTER 99
EACH 179:59
A-B Repeat Playback
5
CINEMA
DVD-
VIDEO
TITLE SEARCH
CHAPTER SEARCH
You can repeat the desired part.
During playback
4 Press the number keys to enter the desired item number, then
press ENTER.
● Playback starts from the selected section.
Examples:
A To select track 5, press the number key A5B.
B To select track 15, press the number key A1B and A5B.
C To select track 25, press the number key A2B, then A5B.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select AA-B xB.
3 Press ENTER at the beginning of the desired part you want to
repeat (point A). The elapsed playing time of the point A
appears.
If you have specified a wrong selection
Press RETURN on the remote control and repeat the above
procedures from step 2.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
DVD-
VIDEO
To clear the on-screen bar
Press ON SCREEN.
A
1 : 25 : 58
B
:
:
NOTES:
4 Press ENTER at the end of the desired part you want to repeat
(point B). The elapsed playing time of the point B appears.
● The selected part of the disc (between point A and B) is played
repeatedly.
● When A7B is displayed on the TV screen in step 4, the chapter
you have selected is not contained in the disc, or chapter search
does not work on the disc.
● Before you press ENTER, playback may start automatically when
you enter the section’s number depending on the disc.
● This function is not possible for a Video CD/SVCD with PBC
function.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
DVD-
VIDEO
A
1 : 25 : 58
B
1 : 40 : 00
To clear the on-screen bar
Press ON SCREEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
31
Simulated Surround Effect
CABLE/SAT
TV DVD
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
0-9
1 Press ON SCREEN twice to access the on-screen bar.
CANCEL
2 Press D E to select A
B, then press ENTER.
● A3D-ONB appears above the selected item and Simulated
Surround Effect is activated.
● Each time you press ENTER, A3D-ONB appears and disappears
alternately.
ENTER
rtwe
RETURN
6
2
TITLE 99
DVD-
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
4
CLEAR
VIDEO
ON SCREEN
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press ENTER to clear A3D-ONB from the screen.
NOTES:
back a title recorded in multichannels.
● Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUT] connectors.
● When Simulated Surround Effect is activated, the settings of
AANALOG AUDIO OUTB and AD. RANGE CONTROLB are
disabled. (A pg. 78)
● Simulated Surround Effect cannot be activated under the
following conditions:
● When the HDD deck is in the recording mode.
● When the HDD or DVD deck is in the timer standby mode.
● When a disc containing both the Dolby Digital 5.1CH and 2CH
sound formats is playing back a scene that is not in the 5.1CH
sound format.
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme
(DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc
(Video CD/SVCD and Audio CD).
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select Aj9B, then press ENTER. The pop-up
window appears under the selected item.
TITLE 99
CHAPTER 99
EACH 0:00
CINEMA AUTO
Adjusting The Picture Quality
DVD-
VIDEO
3 Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
You can obtain optimal picture quality by selecting an appropriate
picture mode.
To play back from a point 12 (minutes): 50 (seconds) elapsed.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select A
B, then press ENTER. The pop-up
TIME
TIME
TIME
window appears under the selected item.
TITLE 99 CHAPTER 99 EACH 0:00
CINEMA AUTO
Press 2
Press 0
Press 1
Press 5
TIME
TIME
DVD-
VIDEO
3 Press F G to select the desired option, then press ENTER.
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2.
NORMAL:
Normally select this option.
CINEMA:
To clear the on-screen bar
Press ON SCREEN.
Suitable for a movie disc, etc.
SHARP:
NOTES:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-coloured surfaces such as cartoons.
● When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
● This function is not possible for a Video CD/SVCD with PBC
function.
SOFT:
Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
32
4 Press I. Playback starts in the programmed order.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
Setting The Progressive Mode
● To add tracks to the end of the programme, perform steps 1
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
through 3.
● During Programme Playback, pressing T skips to the next
selection of the programme. Pressing S returns to the
beginning of the current selection.
1 Set the unit to the progressive scan mode. (A pg. 89)
2 Press ON SCREEN twice to access the on-screen bar.
To clear the on-screen bar and the contents of the programme
Press ON SCREEN.
3 Press D E to select A
B, then press ENTER. The pop-up
To cancel Programme Playback
Press D E to select APRGMB, then press ENTER.
window appears under the selected item.
TITLE 99 CHAPTER 99 EACH 0:00
3D-ON CINEMA
NOTE:
Programme Playback is not possible depending on the type of
disc.
AUTO
DVD-
VIDEO
Random Playback
4 Press F G to select the desired option, then press ENTER.
AUTO:
This mode automatically detects film and video content for
progressive playback. When film content is found, flag
detection is used to invoke playback of film data in full screen.
When video content is found, pictures from multiple fields are
used to detect sections with movement, and then this
movement undergoes advanced image processing for output of
sharp, detailed progressive images without any reduction in
image quality where movement occurs. Normally, operation in
this mode is recommended.
You can play back all the tracks on the disc in random order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select ARNDB, then press ENTER. Playback starts
in random order.
TRACK 99
EACH 0:00
FILM:
CINEMA
Suitable for playing back a progressive scanned film source disc.
VCD
VIDEO:
the played back pictures will be soft.
To clear the on-screen bar
Press ON SCREEN.
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
NOTE:
When the progressive mode is set, be sure to set AL-1 OUTPUTB to
ACOMPONENTB (A pg. 72). Progressive scan is output only from
[COMPONENT VIDEO OUT] connectors.
The same track will not be played back more than once during
Random Playback.
Select The Switching Interval Of The Slide Show
Programme Playback
You can control the switching interval of the slide show.
You can programme up to 30 tracks (Video CD/SVCD or Audio
CD) to play back in the desired order.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press D E to select A
B, then press ENTER. The pop-up
While stopped
window appears under the selected item.
1 Press ON SCREEN twice to access the on-screen bar.
GROUP 99 TRACK 99
2 Press D E to select APRGMB, then press ENTER. The
programme table appears under on-screen bar.
5 SEC.
JPEG
TRACK 99
EACH 0:00
CINEMA
3 Press F G to select the desired option, then press ENTER.
● Each time you press F G, the interval changes as follows:
5 SEC. Y 10 SEC. Y 15 SEC. Y 20 SEC. Y 25 SEC. Y
30 SEC. Y (Back to the beginning)
VCD
3 Press the number keys to
enter the track numbers in the
desired order.
USE [0-9] KEYS TO SELECT TRACK
To clear the on-screen bar
Press ON SCREEN.
Examples:
A To select track 5, press the
number key A5B and ENTER.
B To select track 15, press the
number key A1B and A5B.
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
Program Total Time
C To select track 25, press the number key A2B and A5B.
If you have specified a wrong selection
Press CANCEL(L). The last selection is erased.
Or press CLEAR (o). The whole selection is erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
33
8 Press F G to select your country code, then press ENTER.
● If you do not need to change your country code, jump to 10.
● See ACountry/Area Code List for Parental LockB (A pg. 96).
Parental Lock
9 Press the number keys to enter the same password as in
step 6 above, then press ENTER.
10Press SET UP to complete the setting.
This function restricts playback of DVD VIDEO discs which contain
violent (and other) scenes according to the level set by the user.
For example, if a movie which includes violent scenes supports the
parental lock feature, such scenes which you do not want to let
children view can be cut or replaced by other scenes.
NOTE:
Remember your password, or make a note of it.
To Change The Settings
You can change the Parental Lock settings later.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
1 Perform steps 1 to 3 of ATo Set Parental Lock For The First
TimeB to access the APARENTAL LOCKB screen before
continuing.
To change the level
CABLE/SAT
3 Press F G to select the desired level, then press ENTER.
TV
DVD
DVD
4 Press F G to select ACOUNTRY CODEB, then press ENTER.
0-9
5 Press F G to select your country code, then press ENTER.
● See ACountry/Area Code List for Parental LockB (A pg. 96).
6 Press the number keys to enter the same password as in
step 6 of ATo Set Parental Lock For The First TimeB, then press
ENTER.
ENTER
FGDE
7 Press SET UP to complete the setting.
NOTE:
If you forget your password, enter A8888B in step 6.
To Temporarily Release Parental Lock
When you set the Parental Lock level strictly, some discs may not
be played back at all. When you insert such a disc and try to play it
back, the confirmation screen appears on the TV screen, asking
you whether you want Parental Lock to be temporarily released or
not.
SET UP
1 Load a disc.
● If the disc is rated higher than the selected level, the
confirmation screen appears.
To Set Parental Lock For The First Time
While stopped
2 Press D E to select AYESB, then press ENTER.
● If you select ANOB, you cannot play back that disc.
3 Press the number keys to enter the same password as in
step 6 of ATo Set Parental Lock For The First TimeB, then press
ENTER.
● When you enter the correct password, the Parental Lock is
released and the unit starts playback.
the TV screen. Enter the correct password.
1 Press SET UP to access the Main Menu screen.
2 Press D E to select ADVD VIDEO SET UPB, then press G.
3 Press D E to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
APARENTAL LOCKB, then
press G.
LANGUAGE SET
AUDIO OUTPUT
PARENTAL LOCK DISC PLAY SET UP
PARENTAL LEVEL
COUNTRY CODE
NONE
US
AENTRY ERROR CAN NOT CHANGE PASSWORDB appears
on the TV screen. In such a case, press ENTER. The disc will
stop. Then play back the disc again, and try the procedure
again from step 1.
SET UP
EXIT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT
4 Press F G to select
APARENTAL LEVELB, then
press ENTER.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
NOTE:
LANGUAGE SET
AUDIO OUTPUT
PARENTAL LOCK DISC PLAY SET UP
If you forget your password, enter A8888B in step 3.
PARENTAL LEVEL
COUNTRY CODE
NONE
US
5 Press F G to select the
desired level, then press
ENTER.
● The smaller the value of level
is, the more restrictive the
Parental Lock level becomes.
SET UP
EXIT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT
● Select ANONEB to cancel the restriction.
6 Press the number keys to enter your desired four-digit number,
then press ENTER.
● If you made a mistake, enter a correct number again.
7 Press F G to select ACOUNTRY CODEB, then press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
34
7 Press o twice to stop recording.
stop recording.
Basic Recording
NOTES:
use the disc on this unit for the first time.
● When using a brand-new DVD-RW disc, format the disc either in
VR mode or in Video mode. (A pg. 87)
● Recordings made on DVD-R/RW disc must be finalised to play
Only)B (A pg. 88).
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
disc.
● Some programmes can only be recorded one time.
● When recording is started, an index of the first part of recording is
automatically recorded. (A pg. 57) To record satellite
programmes, refer to page 53. To delete the index, refer to
page 59.
ATTENTION:
It is not possible to record programmes on a DVD-R disc which
has already been finalised.
VHS/HDD/DVD
SELECT
4 9
● Recording sometimes may stop or cannot be performed even if
there is enough available capacity remaining on the disc.
● It is not possible to record on both DVD and HDD simultaneously.
Recording Mode
MPEG2 format is used as recording format. As a guide for picture
quality, the AbpsB unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programmes where quick movement occurs,
such as sports programmes, and LP or EP for talk shows, etc. with
relatively less movement.
7
8
PR +/
REC
MODE
CABLE/SAT
TV
DVD
DVD
The recording modes for a 4.7 GB disc are set as follows:
0-9
Recording
mode
Recording amount
(approx.)
Maximum recording
time (approx.)
PR+/
-
XP
SP
LP
EP
10 Mbps
5 Mbps
1 hour
2 hours
ENTER
2.5 Mbps
1.6 Mbps
4 hours
6 hours
4
FR60-FR360
(A pg. 36)
The amount varies
depending on the
selected time.
1 – 6 hours
7
8
9
FR420
FR480
7 hours
8 hours
REC MODE
●
For details on FR mode, refer to
A
Free Rate Function
B
(
A
pg. 36).
1 Load a recordable disc.
● For details, refer to APlacing A DiscB (A pg. 8).
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or DVD
on the remote so that the DVD lamp lights up on the unit.
3 Press PR +/– or the number keys to select the channel you
wish to record.
4 Press REC MODE repeatedly to select the recording mode,
then press ENTER.
● Each time you press REC MODE, the recording mode changes
as follows:
XP N SP N LP NEP N FR60-FR360* N FR420, FR480 N
(Back to the beginning)
* The value is selectable from 1 to 6 hours in 5-minutes interval by
pressing D E repeatedly after selecting AFR60-FR360B. To change the
value in 30-minutes interval, press and hold D E.
● For details on the recording mode, see the right column.
5 Press R on the unit to start recording. Or while holding R, press
I on the remote control.
● The DVD recording lamp lights up on the unit.
6 Press R and W on the remote control simultaneously to pause
recording.
● To resume recording, press R and I simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
35
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
Recording Features
1 Press R on the unit to start recording.
2 Press R again to engage the ITR mode.
● Turn on the unit.
● On the front display panel, A0:30B appears.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or DVD
on the remote so that the DVD lamp lights up on the unit.
3 If you want to record for more than 30 minutes, press R to
minutes.
NOTES:
● You can only perform ITR using the R button on the unit.
● When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit automatically performs
ARelief RecordingB (A pg. 51).
VHS/HDD/DVD
SELECT
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
7
DISPLAY
CABLE/SAT
NOTE:
TV
DVD
TV AV / VIDEO
It is required that the remote control is set to be able to operate the
TV in advance. (A pg. 74)
DVD
1 During recording, press TV AV/VIDEO to select TV mode.
● Video mode is disengaged, and the VIDEO indicator on the
front display panel lights off .
PR+/
-
VIDEO indicator lights off.
TV screen.
2 Slide the TV/CABLE/SAT/DVD switch to TV.
3 Press PR +/– repeatedly to select the desired channel.
REMAIN
NOTE:
DISPLAY
If a decoder is connected to the unit (A pg. 77), you can select a
scrambled channel as well as other normal channels.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)
● You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
36
Free Rate Function
Receiving Stereo And Bilingual Programmes
Your unit is equipped with a Sound-Multiplex decoder (A2) and a
Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
To record the entire programme, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the programme to be recorded and either the
remaining disc space or the specified recording time (from 60
minutes to 480 minutes).
8 To record the entire programme within the actual
remaining disc space (DVD deck only)
Type of Broadcast Being
On-Screen Display
Received
Select AFR (JUST)B in a recording mode selection procedure.
● Note that this function is available only for timer programming
(A pg. 64).
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
8 To record the entire programme by specifying the desired
recording time
Select AFR60-FR360B, AFR420B or AFR480B in a recording mode
selection procedure. (A pg. 34, 37, 49, 51)
NOTES:
● ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-
screen displays will not appear. (A pg. 80)
● If the quality of stereo sound being received is poor, the
broadcast might be received in monaural with better quality.
8 To record a 25-min. long daily programme five times just
on the same DVD disc for example
Perform Ac Timer ProgrammingB (A pg. 49) procedure. Be
sure to set the recording mode to AFR125B and set Weekly/Daily
Rec Function to AMON-FRIB in step 8 to fit the total recording time
to the whole disc space.
Selection Of The Audio Channel To Be Recorded On A
Disc
When a programme is recorded on a DVD-RAM or DVD-RW disc
in VR mode, all audio channels of the receiving programme are
recorded on the disc. When you record a programme on a DVD-R
or DVD-RW disc in video mode, select the desired audio channel
(ANICAMB or AMONOB) to be recorded on the disc. (A pg. 79)
A: 1st
B: 2nd
Blank
C: 3rd
D: 4th
E: 5th
NOTE:
Before playing back a programme recorded in stereo, or a bilingual
programme, refer to AAudio Channel SelectionB (A pg. 28).
When the same programme is recorded in SP mode instead of in
AFR125B, the 5th programme cannot be recorded.
A: 1st
B: 2nd
C: 3rd
Blank
D: 4th
E: Blank (20 min.)
NOTES:
● You can programme this unit to timer-record, regardless of the
disc remaining time. When the disc remaining time is not enough,
the unit performs ARelief RecordingB (A pg. 51). To avoid this,
make sure of the disc remaining time before setting timer
programming.
(Example) If you programmed to timer-record for 60 minutes in
SP mode on a 120-minute disc, the disc remaining time would be
30 minutes in XP mode, 60 minutes in SP mode, 120 minutes in
LP mode, 180 minutes in EP mode, and 240 minutes in FR480
mode. Timer-recording will not complete beyond these remaining
times.
● The maximum recording time of FR (JUST) mode is the same as
the recording time of FR480 mode. When timer programming a
long programme in FR (JUST) mode on a disc whose remaining
time is short, it is recommended to check the disc remaining time
in FR480 mode to see if the remaining time is enough for the
programme.
● Even if more than one programme are timer programmed in FR
(JUST) mode, only the first one is recorded.
● In order to ensure that the recording fits on the disc, this feature
may leave a slight non-recorded section at the end of the disc.
● There may be some noise and sound disturbance at the point on
the disc where the unit switches the mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
37
Pause recording on HDD deck
Basic Recording
It is not possible to pause recording. Pressing W initiates Live
Memory Playback.
However, it is still possible to pause recording only when recording
the channels of external sources (AL-1B, AL-2B, AF-1B, and ADVB).
While holding R, press W on the remote. To resume recording,
while holding R, press I on the remote.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
No operation can be made with the buttons on the unit.
ATTENTION:
Recording Mode
The HDD on the unit requires approximately 20 seconds to start
up after the unit has been turned on, during which no operation
can be made.
MPEG2 format is used as recording format. As a guide for picture
quality, the AbpsB unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programmes where quick movement occurs,
such as sports programmes, and LP or EP for talk shows, etc. with
relatively less movement.
VHS/HDD/DVD
HDD lamp
SELECT
Recording mode
Maximum recording time (approx.)
XP
SP
34 hours
69 hours
7
8
PR +/
LP
138 hours
209 hours
300 hours
CABLE/SAT
EP
TV
DVD
FR480
HDD
0-9
●
For details on FR mode, refer to
A
Free Rate Function
B
(
A
pg. 36).
NOTE:
The maximum recording time stated in the above table are the
approximate time under unused condition.
PR+/
-
4
8
7
9
REC MODE
1 Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
on the remote so that the HDD lamp lights up on the unit.
2 Press PR +/– or the number keys to select the channel you
wish to record.
3 Press REC MODE repeatedly to select the recording mode,
then press ENTER.
● Each time you press REC MODE, the recording mode changes
as follows:
XP N SP N LP NEP N FR60-FR360* N FR420, FR480 N
(Back to the beginning)
* The value is selectable from 1 to 6 hours in 5 minutes interval by
pressing D E repeatedly after selecting AFR60-FR360B. To change the
value in 30 minutes interval, press and hold D E.
● For details on the recording mode, see the right column.
4 Press R on the unit to start recording. Or while holding R, press
I on the remote control.
● The HDD recording lamp lights up on the unit.
5 Press o twice to stop recording.
● Pressing o once displays the confirmation message to stop
recording. Press o again to terminate recording.
NOTES:
● Continuous recording for over 48 hours is not possible.
● It is not possible to record on both DVD and HDD simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
38
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
Recording Features
● Turn on the unit.
NOTE:
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
on the remote so that the HDD lamp lights up on the unit.
It is required that the remote control is set to be able to operate the
TV in advance. (A pg. 74)
1 During recording, press TV AV/VIDEO to select TV mode.
● Video mode is disengaged, and the VIDEO indicator on the
front display panel lights off.
VHS/HDD/DVD
VIDEO indicator lights off.
HDD lamp
SELECT
TV screen.
7
PR +/
DISPLAY
2 Slide the TV/CABLE/SAT/DVD switch to TV.
CABLE/SAT
3 Press PR +/– repeatedly to select the desired channel.
TV
DVD
TV AV / VIDEO
NOTE:
HDD
If a decoder is connected to the unit (A pg. 77), you can select a
scrambled channel as well as other normal channels.
Elapsed Recording Time And Disc Remaining Time
Indication
PR+/-
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)
● You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
REMAIN
DISPLAY
Receiving Stereo And Bilingual Programmes
Your unit is equipped with a Sound-Multiplex decoder (A2) and a
Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
Type of Broadcast Being
On-Screen Display
Received
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
1 Press R on the unit to start recording.
2 Press R again to engage the ITR mode.
● On the front display panel, A0:30B appears.
3 If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by 30
minutes.
NOTES:
● ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-
screen displays will not appear. (A pg. 80)
● If the quality of stereo sound being received is poor, the
broadcast might be received in monaural with better quality.
NOTES:
● You can only perform ITR using the R button on the unit.
● When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit is automatically shut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
39
Basic Playback
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD so that the HDD lamp lights up on the unit.
VHS/HDD/DVD
SELECT
4
CABLE/SAT
TV
DVD
HDD
8
9
CABLE/SAT
MARK
TV
DVD
HDD
4
S
T
3/SLOW
-
5/SLOW +
9
o
-
JUMP
JUMP +
ENTER
ON SCREEN
4
8
9
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press I.
N
Forward
Reverse
O
ATTENTION:
● It may take a few seconds to start playback. This is not a
malfunction.
Reverse
Slow Motion
3 steps
Reverse Search Reverse
Normal
Play
Slow Motion
3 steps
Forward Search
5 steps
4 steps
Play
● Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.
1
116
-
-
-
60
15
-60 -15 -5 -3
-1
1
1.5
3
5
½
½ ¼
¼
16
1 Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
NOTE:
on the remote so that the HDD lamp lights up on the unit.
You can hear the (normal) audio track only during 1.5x speed
search.
2 Press I to start playback.
● The Library Database Navigation also enables you to search
and select the desired programmes. (A pg. 58)
Still Picture/Frame-By-Frame Playback
1 Press W to pause during playback.
● To resume normal playback, press I.
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-
4 Press o to stop playback.
frame playback.
NOTE:
● Each press of SLOW – (O) or SLOW + (N) advances/
reverses the still picture frame by frame.
● To resume normal playback, press I.
When the Library Database Navigation screen appears, choose a
thumbnail image of the desired title on the TV screen, then press
ENTER. (A pg. 58)
Slow Motion
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.
● Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
Skip Search
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
40
One Touch Replay
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position. Marking onto the disc when recording is helpful to locate
a start point when you play back the disc later.
You can move back the playback position slightly.
Press w.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
To mark positions:
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV screen.
You can easily locate the marked
positions using S or T when
you play back the disc.
1.5x Speed Search
You can play back a title quickly during playback or Live Memory
Playback (A pg. 46).
1.5x speed search cannot be performed during recording on HDD
or DVD.
To delete the marked positions:
While paused, press S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
1 Press O to locate the point to start 1.5x speed search from.
2 Press I to resume playback.
● Pressing ON SCREEN displays A+X1.5B on the top right corner of
the screen.
NOTE:
NOTE:
When the unit is connected with a digital audio device using an
optional optical cable, set ADIGITAL AUDIO OUTB to APCM ONLYB.
(A pg. 28)
When a monaural programme changes to a stereo programme
while recording, a mark signal is automatically recorded.
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 79)
during playback (or Live Memory Playback).
Press JUMP – or JUMP +.
● To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
● Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
● When you cannot advance any further (beginning or end of
programme reached), the message AUNABLE TO GO BACK
ANY MOREB appears on the screen and the on-air screen
resumes. In such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing JUMP – or JUMP + will
result a jump to the scene at the 30 minutes point or 45 minutes point
respectively as illustrated below. At the subsequent press, the scene
will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is
A15 MINB.
Time counter
0 min
40 min
45 min
1 h 15 min
15 min
30 min
1 h
Beginning of programme
Current scene
End of programme
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON VHS DECK
EN
41
label side is facing you and the arrow on the front of the
cassette is pointed toward the unit.
● Do not apply too much pressure when inserting.
● If the record safety tab has been removed, playback begins
automatically. However, when APOWER SAVEB is set to AONB
(A pg. 80), playback will not begin automatically even though a
cassette with its record safety tab intact is inserted.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
Basic Playback
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VHS/HDD/DVD
SELECT
4
5
on the remote so that the VHS lamp lights up on the unit.
3 Find the programme start point. If the tape is advanced past the
start point, press O. To go forward, press N.
4 Press I to start playback.
● ABESTB appears and blinks on the front display panel during
automatic tracking. (A pg. 45)
3
8
x
CABLE/SAT
TV DVD
5 Press o to stop playback.
● To eject the cassette, press M (VHS).
VHS
Clean the video heads using a dry cleaning cassette -
TCL-2 - when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● AUSE CLEANING CASSETTEB appears on the screen (only
with AO.S.D.B set to AAUTOB). (A pg. 81)
NOTE:
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or humidity
● in a dusty environment
● flaw, dirt or mould on video tapes
● continuous usage for a long time
4
3
8
5
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on this unit. Simply
place the recorded cassette into a VHS Cassette Adapter and it can be
used just like any full-sized VHS cassette.
**This unit can record on regular VHS and Super VHS cassettes.
However, it will record regular VHS signals only.
● S-VHS recording is not possible with this unit.
● This unit is equipped with SQPB (S-VHS QUASI PLAYBACK)
that lets you watch tapes recorded in the S-VHS format and the
SP mode with regular VHS resolution.
● SQPB does not deliver Super VHS resolution.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON VHS DECK
EN
42
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
When pressing N:
(SP, LP): +5x Y +7x
When pressing O:
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
Once O is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of O changes
the search speed between –5x and –7x in both SP mode and LP
mode.
(SP, LP): –1x N –5x Y –7x
● To resume normal playback, press I.
CABLE/SAT
TV
DVD
HDD
VHS
DVD
One Touch Replay
During playback (or Live Memory Playback), press
PR+/-
w. The unit
rewinds the picture a little (about 7 seconds) and resumes playback.
● If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press
sections.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● To resume normal playback, press I.
6
2
3
v
1 to 6 times to skip over unwanted
4
5
9
8
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
AUDIO
PROGRESSIVE
SCAN
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press S or T to activate Index Search. AS 1B or AT 1B is
displayed on the TV screen and search begins in the
corresponding direction.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
● To access index codes 2 through 9, press S or T repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press S
twice.
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour.
● you cannot hear the sound.
To locate the beginning of D from the current position, press T
once.
Still Picture/Frame-By-Frame Playback
1 Press W to pause during playback.
Current position
● If there is vertical jitter, press PR +/– to correct the picture.
2 Press W to activate frame-by-frame playback.
● To resume normal playback, press I.
Slow Motion
1 Press W to pause during playback.
Index number
2 Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
● Press N for forward slow motion or O for reverse slow
motion.
● When the specified index code is located, playback begins
automatically.
● To resume normal playback, press I.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR +/– to eliminate the noises.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON VHS DECK
EN
43
Next Function Memory
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
The Next Function Memory
A
tells
B
the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press O, then press I within 2 seconds.
During Playback
Pressing AUDIO changes the soundtrack as follows:
TRACK
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
USE
On-Screen Display
HI-FI
For HI-FI stereo tapes
L W X R
1 Press I to start playback.
HI-FI
L W
For main audio of Bilingual tapes
2 Press and hold I for over 5 seconds, then release.
● AxB lights up on the front display panel.
● After playing back a tape 100 times, the unit stops
automatically.
HI-FI
For sub audio of Bilingual tapes
X R
3 Press o at any time to stop Repeat Playback.
NORM
For audio-dubbed tapes
For audio-dubbed tapes
● Pressing I, O, N or W also stops Repeat Playback.
HI-FI
NORM
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the PR buttons.
NOTES:
● AHI-FI L W X RB should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
● For instructions on recording stereo and bilingual programmes,
refer to page 45.
● AO.S.D.B must be set to AAUTOB or the on-screen displays will not
appear. (A pg. 81)
1 During playback, press PR +/– on the unit simultaneously to
activate manual tracking.
VHS Progressive Scan
You can watch the images on VHS deck in the Progressive scan
mode via component video.
2 Press PR +/– to adjust the tracking manually.
● To return to automatic tracking, press PR +/– simultaneously or
eject and insert the tape again.
ATTENTION:
NOTE:
Your TV needs to be compatible with Progressive and to have
Component video input connectors.
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Set AL-1 OUTPUTB to ACOMPONENTB (A pg. 72), and the
Progressive-compatible TV to its component input mode.
3 Press PROGRESSIVE SCAN for 3 or more seconds.
● The video output indicator q lights up on the front display
panel.
4 Press VHS so that the VHS lamp lights up on the unit, then
press PROGRESSIVE SCAN.
● ACOMP OFFB is displayed on the front display panel. It will be
displayed for 5 seconds.
5 Press PROGRESSIVE SCAN again within 5 seconds.
● ACOMP ONB is displayed on the front display panel and q
lights up on the front display panel.
● The VHS progressive scan image will then be outputted from
the [COMPONENT VIDEO OUT (Y/PB/PR)] connectors.
NOTES:
● Be sure to engage the HDD or DVD deck in stop mode.
● It is possible to watch in interlace mode through the component
video connection (AL-1 OUTPUTB set to ACOMPONENTB) simply
by pressing PROGRESSIVE SCAN to switch to ACOMP ONB.
However, q will not light up on the front display panel as the
image outputted is not in progressive mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON VHS DECK
EN
44
Basic Recording
Recording Features
● Turn on the unit.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VHS/HDD/DVD
SELECT
4 9
7
VHS/HDD/DVD
SELECT
7
8
PR +/
VHS
REC
MODE
CABLE/SAT
CABLE/SAT
TV
DVD
TV AV/VIDEO
VHS
TV
DVD
0-9
PR+/-
PR+/-
4
9
7
8
DISPLAY
AUDIO
REC MODE
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
1 Load a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
NOTE:
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
It is required that the remote control is set to be able to operate the
on the remote so that the VHS lamp lights up on the unit.
TV in advance. (A pg. 74)
1 During recording, press TV AV/VIDEO to select TV mode.
● Video mode is disengaged, and the VIDEO indicator on the
front display panel lights off.
wish to record.
4 Press REC MODE repeatedly to set the recording mode.
VIDEO indicator lights off.
I on the remote control.
● The VHS recording lamp lights up on the unit.
● If AO.S.D.B is set to AAUTOB (A pg. 81), AMARKB blinks on the
screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and the
first LP recording after inserting the cassette. (A pg. 45)
● The programme received on the TV’s tuner is displayed on the
TV screen.
6 Press W to pause recording.
2 Slide the TV/CABLE/SAT/DVD switch to TV.
● You can select channel during the Record Pause mode.
● To resume recording, press I.
3 Press PR +/– repeatedly to select the desired channel.
7 Press o to stop recording.
Elapsed Recording Time Indication
● The VHS recording lamp lights off on the unit.
1 Press DISPLAY until a counter reading appears on the front
display panel.
2 Press CANCEL to reset the counter before starting recording or
playback.
● The counter is reset to A0:00:00B and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON VHS DECK
EN
45
To Record Stereo and Bilingual Programmes (A2)
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
Stereo programmes are automatically recorded in stereo on the Hi-
Fi audio track (with the normal audio track recording mixed L and R
channel sound).
● Bilingual programmes are automatically recorded in bilingual on
the Hi-Fi audio track. The main soundtrack will be recorded on
the normal audio track.
1 Press R on the unit to start recording.
2 Press R again to engage the ITR mode.
To Record NICAM Stereo and Bilingual Programmes
The NICAM audio programme will be recorded on the Hi-Fi audio
track, and the standard audio programme will be recorded on the
normal audio track.
● On the front display panel, A0:30B appears.
3 If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by 30
minutes.
NOTES:
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to ASoundtrack SelectionB (A pg. 43).
● You can only perform ITR using the R button on the unit.
● During Instant Timer Recording, any other timer programmed
recording won’t start even if their start time has come. In such a
case, the timer programmed recording starts (if the end time of
the timer programmed recording is set after the end of Instant
Timer Recording) after the Instant Timer Recording finishes.
B.E.S.T. Picture System
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during playback and
recording, and compensates to provide the highest-possible
playback and recording pictures. You can set AB.E.S.T.B to AONB or
AOFFB to your preference. (A pg. 81)
Tape Remaining Time
1 Press DISPLAY until the time remaining on the tape appears.
● By pressing the DISPLAY button, you can change the display
to show the clock time, counter reading or tape remaining time.
Playback
NOTES:
The unit assesses the quality of the tape once you initiate
playback.
● When you press DISPLAY, the on-screen display appears on the
TV screen for 5 seconds, then the displays other than the counter
disappears. To clear the counter display, press DISPLAY.
● Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
A– –:– –B may sometimes appear, or the display may blink on
occasion.
● The unit adjusts the playback picture quality based on the quality
of the tape in use.
● B.E.S.T. is active during automatic tracking. ABESTB appears and
blinks on the front display panel.
● ABESTB only appears at the beginning of automatic tracking.
Even though it doesn’t appear after that, the B.E.S.T. function is
still operative.
Receiving Stereo And Bilingual Programmes
Your unit is equipped with a Sound-Multiplex decoder (A2) and a
Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Recording
The unit assesses the quality of the tape once you initiate
recording.
● The unit spends approximately 7 seconds assessing the
condition of the tape, then begins recording.
ATTENTION:
Since the B.E.S.T. system works before recording actually starts,
there is a delay of approximately 7 seconds after R and I on the
remote control are pressed, or R on the unit is pressed. To make
sure you record the desired scene or programme in its entirety,
first perform the following steps:
● The unit then automatically checks the condition of the tape
and, after approximately 7 seconds, re-enters Record Pause
mode.
Type of Broadcast Being Received
A2 Stereo
On-Screen Display
ST
A2 Bilingual
BIL.
Regular Monaural
NICAM Stereo
(none)
ST NICAM
BIL. NICAM
NICAM
NICAM Bilingual
NICAM Monaural
B Press I to start recording.
If you want to bypass the B.E.S.T. system and begin recording
immediately, set AB.E.S.T.B to AOFFB. (A pg. 81)
● To listen to a stereo programme, press AUDIO until AHI-FI L W
X RB appears on the TV screen.
● To listen to a bilingual programme, press AUDIO until AHI-FI L WB
Accidental erasure prevention
To prevent accidental recording on
a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
● To listen to the standard (Regular Monaural) audio while
receiving a NICAM broadcast, press AUDIO until ANORMB
appears on the TV screen.
NOTE:
AO.S.D.B must be set to AAUTOB, or the on-screen displays will not
appear. (A pg. 81)
Record safety tab
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
46
Recording/playback Status Display
Live Memory Playback
CABLE/SAT
TV
DVD
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly to select the HDD
or DVD deck.
LIVE
NAVIGATION
This unit records pictures onto the hard disc and DVD-RAM disc
instead of video tapes, then plays back the pictures recorded on
the disc. This makes it possible to achieve high-speed writing and
read-out that has not been possible with conventional VCRs,
enabling recording and playback simultaneously.
Press NAVIGATION to display Library Database
Navigation menu, then choose a programme to play
back. (A pg. 57)
8
High-speed spin
Recording
(High-speed writing)
Playback
(High-speed read-out)
ON SCREEN
Live Memory Playback status can be checked by
pressing ON SCREEN to display the bar meter on
the superimpose display. The current status is
superimposed on the TV screen. (A pg. 14, AWhen
using Live Memory playbackB)
It is called ALive Memory PlaybackB to start playback of the
programme being recorded, with a time-lag between a recording
point and a playback point, as shown in the figure below.
NOTES:
Current playback point
(Live Memory Playback)
● Live Memory Playback could be performed approximately 30
seconds after recording has started on the DVD-RAM disc.
However, for HDD, Live Memory Playback is possible right after
recording has started.
Current recording position
Recording start point
(Recording point)
● Although high-speed search up to approximately 30 seconds
before the current recording point is possible during Live Memory
Playback, once the current recording point is reached, the unit
resumes normal playback and maintains a delay of
approximately 30 seconds so that recording and playback can
continue.
Playback
continues
Recording
continues
1 hour
0
30 min.
Currently elapsed recording time
● When using Live Memory Playback during timer recording,
● When using Live Memory Playback during timer recording,
playback is automatically stopped just before recording starts,
and then recording starts when the time arrives for the next timer-
programme.
Not only can this unit play back a programme previously recorded
while recording or timer recording another programme, but the unit
also allows you to play back from the beginning of a programme
while continuing to record the same programme.
● It is impossible to perform ITR even if you press R during Live
Memory Playback. (A pg. 38)
ITR settings.
● Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.
● Live Memory Playback cannot be performed while recording the
source from DV input. (A pg. 68, ADV Dubbing (HDD & DVD
Deck Only)B)
● When LIVE CHECK is pressed to display the picture currently
being recorded, the picture size may not be correct.
● Press R or LIVE to stop Live Memory Playback.
● Live Memory Playback cannot be performed even if the ALIVE
MEMORYB in AHDD SET UPB is set to other than AOFFB, as
temporary recording on HDD stops during recording on DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
47
F N
Buttons To Be Used During Live Memory Playback
● Each press of the button during playback advances the
playback speed in 4 steps in the forward direction.
Available only when paused
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD or DVD to select the desired deck for Live Memory
Playback.
● Each press of the button advances the still picture frame by
frame.
● Pressing down for 2 or more seconds advances playback at 1/
16 times the normal speed. Then, each press of the button
advances slow-motion at 1/16 times, 1/4 times and 1/2 times
the normal playback.
CABLE/SAT
G o
TV
DVD
● Pressing once during Live Memory Playback or RetroActive
Recording returns to the screen on air.
● Pressing twice during recording stops recording and returns to
the screen on air.
HDD
DVD
H W
● Pressing once pauses playback (still picture playback).
● Pressing repeatedly advances the still picture frame by frame.
I JUMP –
A
back for the selected time interval and resumes playback.
(A pg. 40, AJump SearchB)
B
J JUMP +
C
D
Each press of the button during Live Memory Playback jumps
forward for the selected time interval and resumes playback.
(A pg. 40, AJump SearchB)
E
G
F
H
I
J
K
L
K v
It is useful when skipping over unwanted sections.
● Each press skips forward for approximately 30 seconds and
resumes playback.
● Pressing repeatedly skips forward continuously as many times
as pressed.
M
L w
It is useful when watching sports programmes, etc.
● Each press skips back for approximately 7 seconds and
resumes playback.
● Pressing repeatedly skips back for approximately 7 seconds
continuously as many times as pressed.
M LIVE CHECK
You can check, for example, if the programme you are
recording has already finished.
● Pressing once displays the picture currently being recorded and
the one being played back simultaneously.
● Pressing successively clears the Live Check window and
displays only the picture currently being played back.
A LIVE
Returns to on air programme screen. When a confirmation
message appears by pressing this button during timer
programming or title editing, etc., follow the instruction to return
to the previous screen.
B NAVIGATION
Displays Library Database Navigation menu. You can choose a
title to play back.
C S
● Pressing once skips back to the beginning of the chapter being
played back.
● Pressing down for 2 or more seconds during playback reverses
playback at 5 times the normal speed while pressed. Releasing
the button resumes normal playback.
Available only when paused
● Pressing down for 2 or more seconds reverses playback at 1/16
times the normal speed.
D T
● Pressing once skips forward to the beginning of the next
chapter being played back.
● Pressing down for 2 or more seconds during playback
advances playback at 5 times the normal speed while pressed.
Releasing the button resumes normal playback.
Available only when paused
● Pressing down for 2 or more seconds advances playback at 1/
16 times the normal speed.
E O
● Each press of the button during playback advances the
playback speed in 5 steps in the reverse direction.
Available only when paused
● Each press of the button reverses the still picture frame by
frame.
● Pressing down for 2 or more seconds reverses playback at 1/16
times the normal speed. Then, each press of the button
reverses slow-motion at 1/16 times, 1/4 times and 1/2 times the
normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
48
Temporary recording for Live Memory (HDD deck only) Simultaneous Recording and Playback
This unit automatically records the channel being received, within
the specified range of time, to the reserved space on the hard disc.
The time range can be set for 30 minutes, 1 hour, and 3 hours.
(A pg. 79)
You can play back the previous part of the channel you are
recording or other programs available in the Library Database.
appears.
NOTE:
2 Press D E to select AORIGINALB, then press ENTER.
always recording the channel being received. Thus, it is not
possible to play back TV programmes recorded beyond the
specified range of time since they are already overwritten. To avoid
this in order to save titles, perform normal recording (A pg. 37),
timer recording (A pg. 49, 51), or RetroActive Recording
(A pg. 48).
3 Press FGD E to select the desired title, then press ENTER.
● For DVD-RAM, playback starts from the beginning of the title if
ACONTINUOUS PLAYB in ADVD SET UPB is set to AONB
(A pg. 79).
4 Press D E to select the desired playback method
● Playback of the selected title begins automatically.
About limitation on temporary recording
The temporary recording for Live Memory is cancelled in the
● When the power is turned off
occurred
● When normal recording, timer recording, RetroActive
Recording, or Automatic Satellite Programme Recording
(A pg. 53) is performed
● When the ALIVE MEMORYB setting is changed (A pg. 79)
● When tuner channel setting is performed (A pg. 83)
● When dubbing is performed by pressing DUBBING (A pg. 64)
5 Press o to stop playback.
● The on-air screen resumes.
NOTES:
● You can use various playback features during Live Memory
● To stop simultaneous playback, press o. The on-air screen
resumes. To stop actual recording, press o again.
One Touch Replay
You can move back the playback position slightly during recording
or Live Memory Playback.
Press w.
8 DVD-RAM
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the channel you
are currently watching (temporarily recorded on the background).
(A pg. 48, ATemporary recording for Live Memory (HDD deck
only)B)
● Pressing once during recording skips back for approximately 30
seconds and starts Live Memory Playback. While pressing once
during Live Memory Playback skips back for approximately 7
seconds and resumes playback.
● Each subsequent press skips back for approximately 7 seconds
and resumes playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
1 Press S or O to locate the point to start recording from.
● Each press of O increases the reverse search speed.
2 Press R on the unit to start RetroActive Recording. Or while
holding R, press I on the remote control.
8 HDD
● Pressing during recording skips back for approximately 7
seconds and starts Live Memory Playback. While pressing during
Live Memory Playback skips back for approximately 7 seconds
and resumes playback.
3 Press o to stop RetroActive Recording.
● The on-air screen resumes.
NOTES:
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
● You cannot use RetroActive Recording for channels other than
the channel you are currently watching.
● Recording speed is automatically set to FR65 mode when
RetroActive Recording is started.
● Temporarily recorded data prior to the beginning of RetroActive
Recording is erased when RetroActive Recording started.
Resuming Playback (HDD deck only)
You can resume playback of a TV broadcast you were recording or
watching from the point you have paused.
1 Press W to pause a TV broadcast.
● Recording continues when recording.
2 Press I to start Live Memory Playback.
● Playback resumes from the paused position.
3 Press o to resume the on-air screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON HDD/DVD DECK
EN
49
7 The a number you entered and the matching timer-
recording information are displayed on the TV screen. Check
the programme data.
c Timer Programming
● To cancel this setting, press RETURN.
You can programme this unit to timer-record as many as 16
programmes.
With the a system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
IMPORTANT:
You can use the remote control to enter the a number.
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Press F G to select the desired setting, then press ENTER.
● AINPUT TITLEB (A pg. 58, AModify Title NameB)
● ACATEGORYB (A pg. 59, AModify CategoryB)
● AVPS/PDCB (A pg. 50, AVPS/PDC RecordingB)
● AWEEKLY/DAILYB (A pg. 50, AWeekly/Daily RecordingB)
● AREC MODEB (A pg. 34, ARecording ModeB)
CABLE/SAT
TV
DVD
9 Press F G to select AOKB, then press ENTER to access the
Programme Confirmation screen.
10Press D E to select AEXITB, then press ENTER to complete
timer programming.
0 – 9
● To programme another timer, press D E to select
ACONTINUEB, then press ENTER.
● If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
PROGRAMME
ENTER
NOTES:
FGDE
● There may be cases that the a Timer Programming
function prolongs the stop time of the programming.
● When two successive programmes are recorded on a DVD-RW
disc with the a Timer Programming function, the
beginning of the second one may be left off the recording.
● If the copy limited programme is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
RETURN
DISPLAY
VPS/PDC#
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
1 Load a recordable disc if recording to DVD.
2 Press PROGRAMME to access the programme top screen.
3 Press FGD E to select ASHOWVIEWB, then press ENTER.
● When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (A pg. 52)
Satellite Receiver Users
To timer-record a satellite broadcast using the a system:
A Perform ASatellite Receiver Control Setting (HDD & DVD
Deck Only)B (A pg. 22).
4 Press the number keys to
1
23
PROGRAMME > SHOWVIEW (1/2)
enter the a number of
a programme you wish to
record.
B Perform Ac Timer ProgrammingB (A pg. 49).
C Leave the satellite receiver’s power on.
SHOWVIEW NO.
1 2 3 4
1
4
7
DELETE
2
5
8
0
3
6
SELECT WITH @
THEN PRESS [ENTER]
OR
9
PRESS [PROGRAMME]
TO EXIT
Press FGD E to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
DELETE ALL
RECORD TO
DVD
PROGRAMME
EXIT
ENTER
CONFIRM
SELECT
● If you have made a mistake, press FGD E to select ADELETEB
or ADELETE ALLB, then press ENTER and input the correct
number before you press ENTER again.
5 Press F G to select ARECORD TOB, then press ENTER. Press
F G to select the desired recording deck, then press ENTER.
● If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
screen. Input a valid a number.
● If AGUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRYB appears on the TV screen, set
Guide Programme Numbers manually. (A pg. 83)
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON HDD/DVD DECK
EN
50
Weekly/Daily Recording
You can record programmes with one of the following weekly/daily
timer settings.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are services
designed to assure safe, accurate timer recording. With this
system, special code signals are transmitted together with the
audio/video signals. These code signals control your video unit
and have precedence over the advertised times you may have
preset into the timer. This means that your unit will start and stop
recording when the preset TV programmes actually start and
end^even if the broadcast time of a preset TV programme is
changed.
For the HDD deck
disk drive is saved for new recordings by overwriting previous
recordings. To prevent loss of a needed recording, backup
programmes you wish to save by dubbing them to DVD discs
before overwriting previous recordings. Or save the title of weekly/
daily programmes to avoid overwriting of a previous week/day.
(A pg. 52)
NOTES:
ONCE (One Time Recording)
● Make sure to press VPS/PDCj after completing timer
programming procedure to activate the VPS/PDC recording
function. The VPS/PDC recording indicator lights up on the front
display panel when VPS/PDC recording function is activated.
However, it will blink rapidly when VPS/PDCj is pressed under
the following conditions:
In this mode a programme will not be automatically overwritten.
WEEKLY (OVERWRITE) (Weekly Recording/Weekly Overwrite)
When the set weekly programme is broadcast, the programme
recorded last week is automatically deleted and overwritten by
the new programme. Save the title of each programme you
wish to save, then the recorded programme is saved and will
not be overwritten by the new programme.
● Clock is not set.
● Timer programming has not been set.
● Disc is not loaded.
● HDD is full.
● When you use Manual Timer Programming, set the start time
(VPS or PDC time) exactly as advertised in the TV listing. A
different time than advertised will result in no recording.
● VPS/PDC recording is also possible when a satellite receiver or a
cable system is connected to [L-2 IN/DECODER] connector on
your unit.
● VPS/PDC recording is also possible via the [L-1 IN/OUT]
connector.
● When timer recording via VPS/PDC recording is in progress, it is
not possible to switch between the HDD and DVD deck, and the
following menus cannot be displayed:
This week’s drama
Overwritten
Last week’s drama
MON-SUN (FOR A WEEK)/ MON-SAT (FOR A WEEK)/
MON-FRI (FOR A WEEK) (Daily Recording/Weekly Overwrite)
When the set weekly programme is broadcast, the programme
recorded on the same day last week is automatically deleted
and overwritten by the new programme. Save the title of each
programme you wish to save, then the recorded programme is
saved and will not be overwritten by the new programme.
● Main Menu
● Library Database Navigation Menu
● Editing Menu
This
week
MON TUE WED THU FRI
● If the unit is powered on when set to record a timer programme
onto HDD/DVD using VPS/PDC, the PDC information will not be
used. The programme will be recorded using the start and stop
times originally programmed.
Overwritten
Last
MON TUE WED THU FRI
week
How to check if the station being received transmits a VPS/
PDC signal
A Hold down DISPLAY for about 5 seconds. AVPS/PDCB appears
and blinks on the front display panel. If a VPS/PDC signal is
detected from the station, AVPS/PDCB will stop blinking. If no
VPS/PDC signal is detected from the station, AVPS/PDCB will
blink at a slower rate.
MON-SUN (OVERWRITE)/ MON-SAT (OVERWRITE)/
MON-FRI (OVERWRITE) (Daily Recording/Daily Overwrite)
When the set daily programme is broadcast, yesterday’s
programme is automatically deleted and overwritten by the new
programme. Save the title of each programme you wish to
save, then the recorded programme is saved and will not be
overwritten by the new programme.
B Press DISPLAY again to return to normal display.
Tuesday’s programme
Overwritten
Monday’s programme
For the DVD deck
ONCE (One Time Recording)
WEEKLY (Weekly Recording)
MON-SUN/ MON-SAT/ MON-FRI (Daily Recording)
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Press F G to select ATV PROGB, then press ENTER. Press
F G to select the desired channel.
Manual Timer Programming
9 Press F G to select ACONFIRMB, then press ENTER.
10Set the other recording options as required.
You can programme this unit to timer-record as many as 16
programmes.
● Refer to step 8 in Ac Timer ProgrammingB (A pg. 49).
11Press F G to select AOKB,
If you do not know the a number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
2
PROGRAMME > CALENDAR PR. (3/3)
then press ENTER to access
the Programme Confirmation
screen.
14/01/04 WED 22:30 - 23:00
GARDENING
BBC1
[EDUCATION]
FR360
1:00
28:00
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
GARDENING
EDUCATION
OFF
INPUT TITLE
CATEGORY
VPS/PDC
SELECT WITH @
THEN PRESS [ENTER]
12Press D E to select AEXITB,
then press ENTER to
complete timer
PRESS[PROGRAMME]
TO EXIT
MON-FRI (FOR A WEEK)
FR360
WEEKLY/DAILY
REC MODE
PROGRAMME
EXIT
ENTER
OK
SELECT
programming.
● To programme another timer,
CABLE/SAT
TV
DVD
press D E to select ACONTINUEB, then press ENTER.
● If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
NOTES:
● When two successive programmes are recorded on a DVD-RW
disc with Manual Timer Programming function, the beginning of
the second one may be left off the recording.
● If the copy limited programme is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
AUX
PROGRAMME
ENTER
rtwe
To timer-record a satellite broadcast using Manual Timer
Programming:
A Perform ASatellite Receiver Control Setting (HDD & DVD
Deck Only)B (A pg. 22).
B Perform AManual Timer ProgrammingB (A pg. 51).
In step 8, press AUX to change ATV PROGB to ASATB. Then
press F G to enter the channel position for the satellite
broadcast.
C Leave the satellite receiver’s power on.
1 Load a recordable disc if recording to DVD.
2 Press PROGRAMME to access the programme top screen.
Relief Recording
3 Press FGD E to select ACALENDAR PR.B, then press ENTER.
● When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (A pg. 52)
When a programme that is set for the DVD deck cannot be
recorded properly, the programme is recorded to the HDD deck
instead in XP mode.
● If the remaining capacity of the hard disc is not sufficient, the
programme is recorded to the DVD deck until the remaining
capacity of the DVD disc lasts.
● If AJUSTB is selected for the recording mode, the current
recording mode for the DVD deck is applied.
4 Press FGD E to select the desired date, then press ENTER.
5 Press F G to select ARECORD
2
PROGRAMME > CALENDAR PR. (2/3)
TOB, then press ENTER. Press
F G to select the desired
recording deck, then press
ENTER.
14/01/04 WED 22:30 - 23:00
BBC1
[MISC.
]
XP
RECORD TO
START
HDD
SELECT WITH @
THEN PRESS [ENTER]
22:30
23:00
BBC1
STOP
PRESS[PROGRAMME]
TO EXIT
[0]: SAT
TV PROG
6 Press F G to select ASTARTB,
then press ENTER. Press F G
to set the desired start time,
then press ENTER.
PROGRAMME
EXIT
ENTER
CONFIRM
SELECT
● Each press of F G increases/decreases the start time in 1-
minute interval.
● To increase/decrease the start time in 30-minutes interval,
press and hold F G.
7 Press F G to select ASTOPB, then press ENTER. Press F G to
set the desired stop time, then press ENTER.
● Each press of F G increases/decreases the stop time in 1-
minute interval.
● To increase/decrease the stop time in 30-minutes interval,
press and hold F G.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON HDD/DVD DECK
EN
52
Check Programmes
CABLE/SAT
TV DVD
To check the whole list of programmes
1 Press PROGRAMME to access the programme top screen.
2 Press FGD E to select APROGRAMME LISTB, then press
ENTER.
● The details of a selected programme appear on the top of the
screen.
● The daily programme of a title is listed as one programme.
PROGRAMME
To check the list of programmes by date
ENTER
2 Press FGD E to select ACALENDAR LISTB, then press ENTER.
3 Press F G to select the desired date, then press ENTER.
rtwe
Cancel And Change Programmes
● Repeat steps in ACheck ProgrammesB to select a programme
before proceeding.
To cancel the programme
To modify the programme settings
1 Press FGD E to select AMODIFYB, then press ENTER.
2 Change the settings of the desired recording options as
required.
● Refer to steps 4 – 12 in AManual Timer ProgrammingB
(A pg. 51).
To skip the weekly/daily programmes to the next week/day
It is easy to temporarily cancel weekly/daily programmes of a
week/day.
1 Press FGD E to select APROGRAMME SKIPB, then press
ENTER.
2 Press D E to select ASKIPB, then press ENTER.
To save the titles of weekly/daily programmes (HDD Deck
Only)
Use this function to avoid overwriting titles of weekly/daily
programmes of a previous week/day.
1 Press FGD E to select ATITLE SAVEB, then press ENTER.
2 Press D E to select ASAVEB, then press ENTER.
NOTE:
This function is available only when the remaining capacity of the
hard disc is sufficient.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON HDD/DVD DECK
EN
53
● Make sure the satellite receiver is connected to the unit’s [L-2
IN/DECODER] connector.
● Programme the timer on the satellite receiver.
Automatic Satellite Programme
Recording
(HDD Deck Only)
1 Press HDD on the remote to choose the recording deck. You
can also press VHS/HDD/DVD SELECT on the unit repeatedly
to select the recording deck.
This function allows you to automatically record a satellite
programme which is timer-programmed on your external satellite
receiver. Connect a satellite receiver to the unit’s [L-2 IN/
DECODER] connector and programme the timer on the satellite
receiver. The unit starts or stops recording by the signals input
from the satellite receiver. After recording, the unit’s power shuts
off automatically.
2 Set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB.
(A pg. 72)
● Also refer to AIMPORTANTB on page 76.
3 Press REC MODE repeatedly to set the recording mode.
4 Press and hold SATj for about 2 seconds to engage the
Automatic Satellite Programme Recording mode. AVB and
ATTENTION:
● Be sure not to turn on the satellite receiver before the
programme is executed; otherwise, the unit will start recording
when the satellite receiver’s power is turned on.
● If you have connected another appliance other than a satellite
receiver to the [L-2 IN/DECODER] connector, be sure not to
engage the Automatic Satellite Programme Recording mode;
otherwise, the unit will start recording when the connected
appliance’s power is turned on.
NOTES:
● To disengage the Automatic Satellite Programme Recording
mode, press SATj.
Satellite Programme Recording mode.
● In step 4, if AVB blinks quickly on the front display panel even
though your satellite receiver’s power is off, Automatic Satellite
Programme Recording will not work properly with that satellite
receiver*. If this is the case, perform AManual Timer
ProgrammingB (A pg. 51) to timer-record a satellite programme.
* Some satellite receivers output signals even if the power is off. Automatic
Satellite Programme Recording is not possible with those satellite
receivers.
● Automatic Satellite Programme Recording and timer-recording
cannot be done at the same time.
VHS/HDD/DVD
SELECT
● AVB blinks on the front display panel while Automatic Satellite
Programme Recording is in progress.
● For timer programming of the satellite receiver, refer to the
instruction manual of the satellite receiver.
● Automatic Satellite Programme Recording is not possible if your
satellite receiver does not have a timer.
● Pressing the unit’s A button while Automatic Satellite
Programme Recording is in progress turns off the unit’s power
and disengages the Automatic Satellite Programme Recording
mode.
REC MODE
CABLE/SAT
TV
DVD
● If there are more than one satellite programmes you wish to
record with Automatic Satellite Programme Recording, it is not
possible to set different recording modes for each programme.
● Depending on the type of satellite receiver, the unit may not
record a slight portion of the beginning of the programme or may
record slightly longer than the actual length of the programme.
● If you engage the Automatic Satellite Programme Recording
mode when the satellite receiver’s power is on, the unit will not
HDD
blinks on the front display panel. When the satellite receiver
shuts off once and is turned back on again, the unit starts
recording.
● You can also record a programme from your cable system in the
same way if the system has a timer.
● Just Clock (A pg. 86) does not work when the Automatic
Satellite Programme Recording mode is engaged.
REC MODE
SAT#
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON VHS DECK
EN
54
IMPORTANT:
b Timer Programming
Make sure the channel position number you wish to record is
displayed; if not, see Ac System SetupB (A pg. 83) and
set the Guide Programme number correctly.
You can programme this unit to timer-record as many as 8
programmes.
With the a system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
press D E to select ASP/LPB, then press F G to select the
You can use the remote control to enter the a number.
8 Press D E to select AVPS/PDCB, then press F G to select the
desired channel.
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
9 Press ENTER to complete timer programming.
● To programme another timer, repeat steps 3 – 9.
● If APROGRAM OVERLAPPEDB appears on the TV screen, see
page 56.
CABLE/SAT
10Press VHSj to engage the unit’s timer mode. The VHS
recording lamp lights up on the unit and the HDD or DVD deck
is automatically selected. Press A to turn off the unit. When
the HDD or DVD deck is in timer standby mode, the unit is
automatically turned off.
TV
DVD
VHS
0-9
● The VHS timer indicator lights up on the front display panel
when the VHS deck is set to the timer recording standby
mode by pressing VHSj. However, it will blink rapidly when
VHSj is pressed under the following conditions:
CANCEL
ENTER
PROGRAMME
● Clock is not set.
● Timer programming has not been set.
● Cassette is not loaded.
rtwe
● Timer recording standby mode with a cassette without record safety
tab inserted
If you have moved to a different area or if a broadcasting
station’s programme number has been changed, the wrong
programme number will be displayed on the a
Guide Programme number for that station. (A pg. 83, Ac
System SetupB)
REC MODE
VHS#
NOTES:
● To Timer-Record Weekly Or Daily Serials:
1 Load a cassette with the record safety tab intact.
2 Press VHS so that the VHS lamp lights up on the unit.
3 Press PROGRAMME to access
^ in step 6, press number keys A9B for weekly serials or
number keys A8B for daily serials (Monday - Friday). Either
AWEEKLYB or ADAILYB appears on the TV screen. Pressing the
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes.
(A pg. 56)
PROGRAMME
the Programme screen.
NSHOWVIEW PRGM
PROGRAMME/CONFIRM
4 Press F G to select
ASHOWVIEW PRGMB, then
press ENTER.
[JK] N [ENTER]
[PROGRAMME] : EXIT
● To record the programmes received by satellite receiver, record
on the HDD or the DVD discs. For details, refer to Ac Timer
ProgrammingB (A pg. 49)
5 Press the number keys to enter
the a number of a
programme you wish to record,
then press ENTER.
● If you have made a mistake,
[0-9] N [ENTER]
press CANCEL and input the
correct number before you press
ENTER.
● If the number you entered is
[L] : DELETE
[PROGRAMME] : EXIT
SHOWVIEW SYSTEM
invalid, AERRORB appears on the TV screen and AErrB appears
on the front display panel.
Press CANCEL and input a valid a number.
6 The a number you
entered and the matching timer-
DATE
START
STOP
recording information are
displayed on the TV screen.
Check the programme data.
● To cancel this setting, press
PROGRAMME.
TV PROG
DAILY/WEEKLY
MON-FRI
ARD
VPS/PDC
OFF
SP/LP
SP
CURSOR : [HI] SELECT : [JK]
CONFIRM : [ENTER]
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON VHS DECK
EN
55
7 Press D E to select ASTOPB, then press F G to set the desired
stop time.
Manual Timer Programming
● Each press of F G increases/decreases the stop time in 1-
minute interval.
● To increase/decrease the stop time in 30-minutes interval,
press and hold F G.
You can programme this unit to timer-record as many as 8
programmes. If you do not know the a number for the
programme you wish to record, use the following procedure to set
your unit to timer-record the programme.
8 Press D E to select ADATEB, then press F G to set the desired
date.
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● The current date appears on the TV screen. The date you enter
appears in its place.
9 Press D E to select ATV PROGB, then press F G to select the
desired channel.
10 Press REC MODE to select the desired recording mode. Or
press D E to select ASP/LPB, then press F G to select the
desired recording mode.
CABLE/SAT
TV
DVD
VHS
11Press D E to select AVPS/PDCB, then press F G to select the
desired channel.
0-9
13 Press PROGRAMME to complete timer programming.
APROGRAM COMPLETEDB appears on the TV screen for
about 5 seconds, then the normal screen appears. If
APROGRAM OVERLAPPEDB appears on the TV screen, see
page 56.
PROGRAMME
rtwe
● To programme another timer, repeat steps 3 – 13.
ENTER
14 Press VHSj to engage the unit’s timer mode. The VHS
recording lamp lights up on the unit and the HDD or DVD deck
the HDD or DVD deck is in timer standby mode, the unit is
automatically turned off.
REC MODE
● To disengage the timer mode, press VHSj again.
NOTES:
● To Timer-Record Weekly Or Daily Serials:
^ anytime during steps 8 through 10, press number keys A9B for
weekly serials or number keys A8B for daily serials (Monday -
Friday).
VHS#
Either AWEEKLYB or ADAILYB appears on the TV screen.
disappear.
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
APROGRAM FULLB appears on the TV screen. To record the
extra programme, you must first cancel any unnecessary
programmes. (A pg. 56)
backup keeps your selections for approximately 5 seconds.
● Programmes that start after midnight must have the next day’s
date.
● To record the programmes received by satellite receiver, record
on the HDD or the DVD discs. For details, refer to AManual Timer
ProgrammingB (A pg. 51).
1 Load a cassette with the record safety tab intact.
2 Press VHS so that the VHS lamp lights up on the unit.
3 Press PROGRAMME to access the Programme screen.
4 Press F G to select
PROGRAMME
APROGRAMME/CONFIRMB, then
SHOWVIEW PRGM
NPROGRAMME/CONFIRM
press ENTER access the
Programme Check screen.
[JK] N [ENTER]
[PROGRAMME] : EXIT
5 Press F G to select the blank
DATE
START
STOP
CH
number, then press ENTER. The
programme screen appears.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are services
designed to assure safe, accurate timer recording. With this
system, special code signals are transmitted together with the
audio/video signals. These code signals control your video unit
and have precedence over the advertised times you may have
preset into the timer. This means that your unit will start and stop
recording when the preset TV programmes actually start and
end^even if the broadcast time of a preset TV programme is
changed.
[JK] N [ENTER]
[PROGRAMME] : EXIT
6 Press D E to select ASTARTB,
then press F G to set the desired
start time.
● Each press of F G increases/
decreases the start time in 1-
minute interval.
● To increase/decrease the start
time in 30-minutes interval, press
and hold F G.
STOP
START
DATE
DAILY/WEEKLY
MON-FRI
TV PROG
ARD
VPS/PDC
OFF
SP/LP
SP
NOTES:
CURSOR : [HI] SELECT : [JK]
● When you use Manual Timer Programming, set the start time
(VPS or PDC time) exactly as advertised in the TV listing. A
different time than advertised will result in no recording.
● VPS/PDC recording is not possible when a satellite receiver or a
cable system is connected to [L-2 IN/DECODER] connector on
your unit.
CONFIRM : [ENTER]
● VPS/PDC recording is also possible via the [L-1 IN/OUT]
connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING ON VHS DECK
EN
56
When Programmes Overlap Each Other
If APROGRAM OVERLAPPEDB appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
CABLE/SAT
TV DVD
VHS
1
STOP
DATE START
CH
PROGRAM OVERLAPPED
DAILY
CANCEL
ENTER
PROGRAMME
[JK] N [ENTER]
[PROGRAMME] : EXIT
rtwe
Example: Programme 1 (you have just made) and Programme
4 overlap each other.
1 Confirm the overlapping programmes. Overlapping
programmes blink on the TV screen.
2 Press F G to select the programme to modify, then press
ENTER or E.
● You can only select one of the overlapping programmes.
VHS#
NOTE:
If you do not mind this overlap, press PROGRAMME to finish the
timer programme setting. The programme with the lower
programme number will be recorded and the other one will not be
recorded correctly. If no changes are made for approximately 1
minute, the unit will return to the normal screen.
Check, Cancel And Change Programmes
3 Press F G to select the desired programme to be cancelled or
1 When the VHS recording lamp (R) lights up on the unit
changed.
Press VHSj, then press DVD A.
When the VHS lamp does not light up on the unit
Press VHS so that the VHS lamp lights up on the unit.
To cancel the programme
Press CANCEL.
5 seconds, then the normal screen resumes.
2 Press PROGRAMME to access
DATE
STOP
START
CH
the Programme screen.
To change the programme setting
3 Press F G to select
Press ENTER, then go to step 4.
APROGRAMME/CONFIRMB,
then press ENTER to access the
Programme Check screen.
4 Change the programme setting.
● Refer to steps 6 – 12 in AManual Timer ProgrammingB
(A pg. 55).
[JK]N[ENTER]
[PROGRAMME] : EXIT
5 Press PROGRAMME to access the Programme screen, then
press F G to select APROGRAMME/CONFIRMB to check if the
conflict has been settled.
4 Press F G to select the
programme, then press ENTER.
The programme screen appears.
DATE
START
STOP
Programme check screen appears.
● APROGRAM COMPLETEDB appears on the TV screen for
about 5 seconds, then the normal screen resumes.
TV PROG
DAILY/WEEKLY
MON-FRI
To cancel a programme
Press CANCEL.
VPS/PDC
OFF
SP/LP
SP
CURSOR : [HI] SELECT : [JK]
NOTE:
CONFIRM : [ENTER]
When any overlaps remain after deletion and modification of
programmes, Programme Check screen remains showing the
conflicting programmes. In such a case, repeat the procedure
above until the conflict is solved.
5 Change the settings of the desired recording options as
required.
● Refer to steps 6 – 12 in AManual Timer ProgrammingB
(A pg. 55).
6 Press PROGRAMME to complete timer correction. The
previous screen resumes.
7 Press VHSj.
● The VHS recording lamp lights up on the unit and the HDD or
DVD deck is automatically selected. When the HDD or DVD
deck is in timer standby mode, the unit is automatically turned
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
57
Using Library Database Navigation system, you can easily modify
registered information, edit the title or play list, as well as search
for the beginning of each title.
Library Database Navigation
About registration of information
The following information is automatically registered for each title
when ordinary recording or timer recording is performed, then
stored in an area specified on the unit.
● index* (reduced pictures to show programme titles)
● programme title*
● category*
● date and time
● channel
● recording mode
The Library Database Navigation enables you to search and select
the desired titles recorded on the HDD deck and the DVD deck
very easily.
You can record up to 99 titles on a disc.
Each time a title is recorded, the information of the title is
registered for the Library Database Navigation automatically.
So, you can confirm the information of the titles recorded with the
Library Database Navigation screen. And, you can also select one
of the titles recorded using the Library Database Navigation.
The following screen appears as the Library Database Navigation
screen when you press NAVIGATION. You can move the arrow to
select the desired position on the screen by pressing FGD E on
the remote control.
● length of recording time
The items marked with an asterisk (*) can be easily modified and
registered again after recording by using Library Database
Navigation system.
The limitations of registration
You can register information up to 99 titles for the DVD deck and
200 titles for the HDD deck.
When the amount of information is at the limits of registration, you
cannot record new titles any more. In this case, you need to delete
old titles to register new one. (A pg. 59)
NAVIGATION > ORIGINAL
0026 [FISH WORLD
25/12/03 THU 10:00 - 10:15
FROG WORLD
]
143 MIN
A
PR.
3
D
E
[HOBBY]
EP
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
TO EXIT
NOTES:
B
C
● Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for
library appears.
ENTER
SELECT
NAVIGATION
EXIT
F
G
● When you move the title recorded on HDD to DVD, the icon will
be changed to
.
A Playback screen
● Sound of received channel may be interrupted while the Library
Database Navigation screen is displayed.
● The order of index which are displayed by pressing DUBBING
differs from the images displayed by pressing NAVIGATION or
EDIT.
● You cannot perform timer recording during editing of thumbnail
images or play lists by pressing EDIT. Press EDIT to clear the
Editing screen before performing timer recording.
(Indicates currently received TV programme.)
B Guidance for operations
C Scroll bar
(Appears when there are over nine registered titles (or play
lists). The scroll bar only indicates that there are more titles (or
play lists) hidden off the current screen display. To show hidden
titles (or play lists), press FGD E repeatedly.)
D Recording information for the title indicated by the arrow
E Index list
(Thumbnail still of each title)
Thumbnail still is not to be played back.
F Index
:Indicates no index is registered.
:Indicates title in standby for timer recording.
:Indicates no title is registered.
G Icons
(Indicate the record condition of each title.)
The Icons and their meanings
This title is write-protected.
This title was recorded with timer recording.
This title is Weekly Recording/Weekly Overwrite.
This title is Daily Recording/Daily Overwrite.
This title is Daily Recording/Weekly Overwrite.
This title has not been played back.
W
D
D
NEW
This title is copy-protected.
This title can only be recorded once (copy-once title).
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
58
Scan For Beginning Of Title
Edit Original Information
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to scan.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to modify.
CABLE/SAT
TV
DVD
HDD
DVD
ATTENTION:
● It is not possible to modify discs recorded on DVD units from
other manufacturers.
● You cannot perform timer recording during editing the index by
pressing EDIT. Press EDIT to clear the editing screen before
performing timer recording.
MEMO
NAVIGATION
ENTER
rtwe
Modify Index
1 Press EDIT. The Editing screen appears.
4
9
2 (DVD deck only) Press FGD E to select AMODIFYB under
8
AORIGINAL/PLAY LISTB, then press ENTER.
3 Press FGD E to select AMODIFYB under AORIGINALB, then
press ENTER.
4 Press FGD E to select one title you want to modify, then press
ENTER.
5 Press D E to select AINDEXB.
6 Search for the picture from the
EDITING > MODIFY INDEX
title by pressing the
25/12/03 THU 10:00 - 10:15
FROG WORLD
PR
3
[OTHERS]
SP
INDEX
appropriate buttons (O, I,
N, or W). The pictures of the
title appear on the left window.
You can scan the beginning of the title easily with the Library
Database Navigation.
1 Press NAVIGATION. The Library Database Navigation screen
PROG.
1
0 : 01 : 03
7 Confirm the arrow is on
AREPLACEB, then press
ENTER to register new index.
New index appears on the
right window.
SELECT IMAGE TO REPLACE WITH
ON REMOTE
RETURN
appears.
REPLACE
2 Press FGD E to select AORIGINALB, then press ENTER.
3 Press FGD E to select the
NAVIGATION > ORIGINAL
index (small pictures) of the
0026 [FISH WORLD
25/12/03 THU 10:00 - 10:15
]
143 MIN
PR.
3
desired title, then press
ENTER.
[HOBBY]
FROG WORLD
EP
return to the previous screen.
SELECT WITH @
THEN PRESS [ENTER]
● When you want the plural titles
to be played back
8 Press EDIT to return to the normal screen.
PRESS [NAVIGATION]
TO EXIT
continuously, press MEMO
after selecting the desired title.
The numbers of the playback
order appear on the index. You can select up to 8 titles.
● When you want to correct the order, move the arrow to the
desired index and press MEMO. The number disappears and
the unit re-numbers the other programmes automatically.
● When you want to cancel the order, press CANCEL(L).
NAVIGATION
EXIT
ENTER
Modify Title Name
SELECT
1 Perform steps 1 – 4 of AModify IndexB (A pg. 58) before
continuing.
2 Press FGD E to select ANAMEB, then press ENTER.
3 Press FGD E to select the
A
BC EDITING > MODIFY NAME
desired letter or symbol, then
press ENTER. Repeat this
process to complete the name.
● To correct a letter, press
FGD E to select ADELETEB,
then press ENTER.
0026 [FISH WORLD
25/12/03 THU 10:00 - 10:15
FROG WORLD
]
64 MIN
PR.
3
XP
[HOBBY]
4 Press D E to select
F ROG
W
OR L D
NAVIGATION > ORIGINAL
SELECT WITH @
THEN PRESS [ENTER]
ABEGINNINGB, then press
ALPHABET SYMBOL1
SYMBOL2
25/12/03 THU
SP
A
G
M
S
B
H
N
T
C
I
D
J
E
K
F
L
R
X
a
g
b
h
n
t
c
i
d
j
e
k
f
l
1
4
7
0
?
&
2
5
8
+
!
3
6
9
-
10:00
-
10:15
PR.
3
PRESS [EDIT]
TO EXIT
ENTER.
FROG WORLD
O
U
P
V
Q
W
m
s
o
u
p
v
q
w
r
x
[HOBBY]
● To resume playback from the
point where playback was
previously stopped, press D E
to select ARESUMEB, then
press ENTER.
Y
Z
y
z
"
SELECT WITH @
THEN PRESS [ENTER]
'
@
SELECT HOW TO PLAY BACK
BEGINNING RESUME REPEAT
EDIT
EXIT
ENTER
CANCEL
DELETE
SAVE
PRESS [NAVIGATION]
TO EXIT
● You can enter the letters up to
64.
SELECT
NAVIGATION
EXIT
ENTER
4 Press FGD E to select ASAVEB, then press ENTER.
5 Press EDIT to return to the normal screen.
SELECT
● To repeat playback of a
selected title, press D E to select AREPEATB, then press
ENTER.
5 Press W to pause playback.
● To resume normal playback, press I.
6 Press o to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Modify Category
Delete Unwanted Part Of The Title
(DVD-RAM & DVD-RW (VR mode) only)
1 Perform steps 1 – 4 of AModify IndexB (A pg. 58) before
continuing.
You can delete unwanted part of the title.
2 Press FGD E to select ACATEGORYB, then press ENTER.
1 Perform steps 1 – 3 of AModify IndexB (A pg. 58) before
continuing.
3 Press FGD E to select the
EDITING > MODIFY CATEGORY
desired category, then press
ENTER.
0026 [FISH WORLD
25/12/03 THU 10:00 - 10:15
]
64 MIN
PR.
[HOBBY]
2 Press FGD E to select ADEL SCENB, then press ENTER.
3
FROG WORLD
XP
3 Press FGD E to select one title whose unwanted part you want
MOVIES
MUSIC
DRAMA
SELECT WITH @
THEN PRESS [ENTER]
4 Press EDIT to return to the
to delete, then press ENTER.
ANIMATION
NEWS
SPORTS
DOCUMENTARY
EDUCATION
normal screen.
PRESS [EDIT]
TO EXIT
4 The playback pictures appear in the window on the screen. The
elapsed playing time starts counting with the arrow on AINB.
WEATHER
EDIT
EXIT
ENTER
SELECT
HOBBY
ENTERTAINMENT ART
5 Find the point where you want
EDITING > ORIGINAL/DEL SCENE
the deletion to begin, then
press ENTER with the arrow
on AINB. The edit-in time is
fixed and the elapsed playing
time starts counting again.
21/12/03 SUN 18:30 - 20:00
RALLY CAR
PR. 12
[OTHERS]
SP
IN
Protect Title (DVD-RAM & DVD-RW (VR mode) only)
You can protect titles to prevent accidental erasure of the
important titles.
0 : 05 :15
OUT
0 : 06 :15
PROG.
1
0 : 01 : 03
SELECT SCENE TO REPLACE WITH
ON REMOTE
1 Perform steps 1 – 3 of AModify IndexB (A pg. 58) before
6 Find the point where you want
the deletion to end, then press
ENTER with the arrow on
IN OUT
PREVIEW
OK
continuing.
2 Press FGD E to select APROTECTB, then press ENTER.
AOUTB. The edit-out time is fixed.
3 Press FGD E to select a title you want to protect, then press
● Press O, I, N, S, T or W to find the edit-in and edit-out
points.
ENTER.
4 Press D E to select APROTECTB, then press ENTER. A
appears.
● To cancel the protection, repeat 3 – 4 again. In step 4, select
ACANCEL PROTECTB, then press ENTER.
B
the edited title.
8 Press D E to select AOKB, then press ENTER.
● If you do not want to delete the scene, press EDIT or RETURN.
5 Press EDIT to return to the normal screen.
To modify the points
A Press EDIT or RETURN.
B Repeat steps 4 – 8 as necessary.
NOTE:
All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 59)
9 Press D E to select ADELETEB, then press ENTER. The
selected scene is deleted.
Delete Title
● To cancel the deletion, press D E to select ACANCELB, then
press ENTER.
You cannot record any more with Library Database Navigation
once the registered titles on the disc reach 99 titles for the DVD
10Press EDIT to return to the normal screen.
deck and 200 titles for the HDD deck. Deleting unnecessary titles
after dubbing or other operations can increase remaining time and
available recording capacity. (For DVD-R discs, although it is
possible to delete recorded titles, available recording capacity
does not increase.) The deleted title is never resumed. Play lists
and title information in the unit’s library are also deleted.
NOTES:
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
● Available recording capacity may not match the deleted part after
deletion.
1 Press EDIT. The Editing screen appears.
2 Press FGD E to select ADELETEB under AORIGINALB, then
press ENTER.
3 Press FGD E to select one title you want to delete, then press
ENTER.
4 Press D E to select ADELETEB, then press ENTER.
● When you cancel the deletion, select ACANCELB, then press
ENTER.
5 Press EDIT to return to the normal screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
60
Divide Title (HDD deck only)
Edit Play List Information
1 Press EDIT. The Editing screen appears.
2 Press FGD E to select ADIVIDEB, then press ENTER.
3 Press FGD E to select a title to divide, then press ENTER.
4 Press I, and press O or N to locate a point to divide, then
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to modify.
press W.
5 Confirm the arrow is on ADIVIDEB, then press ENTER at the
dividing point.
● The first picture (start) of the newly created title appears in the
bottom right window.
ATTENTION:
6 Press D E to select APREVIEWB, then press ENTER.
● The first several seconds of the newly created title is played
back, then the playback pauses at the dividing point.
● To undo the division, press D E to select ARETRYB, then press
ENTER. Repeat the above procedure to locate another point to
divide.
● It is not possible to modify discs recorded on DVD units from
other manufacturers.
● You cannot perform timer recording during editing the index by
pressing EDIT. Press EDIT to clear the editing screen before
performing timer recording.
7 Press D E to select AOKB, then press ENTER.
8 Press EDIT to return to the normal screen.
CABLE/SAT
TV
DVD
NOTE:
HDD
There may be a discrepancy of several seconds between the
DVD
Modify Chapter
(HDD, DVD-RAM & DVD-RW (VR mode) only)
You can create and delete chapter marks in titles.
CANCEL
ENTER
MEMO
EDIT
NAVIGATION
1 Perform steps 1 – 4 of AModify IndexB (A pg. 58) before
continuing.
rtwe
2 Press FGD E to select ACHAPTERB, then press ENTER.
6
4
5
2
3
3 Confirm the arrow is on
EDITING > MODIFY CHAPTER
AMARKB, then press ENTER at
CHAPTER
03/10
positions you want to mark.
● The newly created chapter is
displayed.
9
8
0 : 07 : 01
● To undo the marking, press
D E to select ARETRYB, then
press ENTER. Repeat the
above procedure to locate
another point to mark.
01 00 : 00 : 00
02 00 : 05 : 30
03 00 : 07 : 00
04 00 : 30 : 00
RETURN
MARK
ERASE
RETRY
4 Press I, and press O or N to select one chapter you want
to delete, then press W.
Play List
5 Press D E to select AERASEB, then press ENTER.
● The selected chapter is deleted.
It is a collection of the scenes. A play list can be freely edited and
played back without ever changing any original recording data.
Using the random access of a disc (which allows video data to be
instantly read no matter where it is on the disc), a play list includes
information such as the timer counter for the playback start point
and end point, indexes for checking the contents of recorded data,
category information, and more. Playback according to a play list
you have created allows you to enjoy various combinations of
video images from a single title.
● To undo the deletion, press D E to select ARETRYB, then press
ENTER. Repeat the above procedure to locate another point to
delete.
6 Press EDIT to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
61
Create Play List
Add scenes
1 Press EDIT. The Editing screen appears.
1 Perform steps 1 – 5 in AEdit ScenesB (A pg. 61) before
continuing.
2 (DVD deck only) Press FGD E to select AMODIFYB under
AORIGINAL/PLAY LISTB, then press ENTER.
2 Press FGD E to select ASEL. TITLEB, then press ENTER.
3 Perform steps 4 – 10 in ACreate Play ListB (A pg. 61).
3 Press FGD E to select ACREATEB, then press ENTER.
4 Press FGD E to select a title that includes scenes to be
Move Scenes
included in a play list, then press ENTER.
5 The playback pictures appear in the window on the screen. The
elapsed playing time starts counting with the arrow on AIN/
OUTB.
1 Perform steps 1 – 5 of AEdit ScenesB (A pg. 61) before
continuing.
2 Press FGD E to select AMOVEB, then press ENTER.
3 Press F G to select a scene to move, then press ENTER.
6 Find the point where you want
EDITING > PLAY LIST/CREATE
TOTAL
00 : 00 : 00
PAGE
the created play list to begin,
then press ENTER with the
arrow on AIN/OUTB. The edit-in
time is fixed and the elapsed
playing time starts counting
again.
SCENE
1 / 1
1
2
3
4
5
6
7
8
PRO.
1
4 Press F G to select another scene to which the scene is to be
moved, then press ENTER.
press ENTER.
PRO.
1
0 : 00 :15
IN
OUT
IN/OUT
SEL. TITLE
MODIFY
DELETE
MOVE
PREVIEW
OK
5 Perform steps 8 – 10 in ACreate Play ListB (A pg. 61).
RETRY
7 Find the point where you want
the created play list to end,
Delete Scenes
then press ENTER with the arrow on AIN/OUTB. The edit-out
time is fixed.
● Press O, I, N, S, T or W to find the edit-in and edit-out
points.
● The edit-out point must come after the edit-in point.
1 Perform steps 1 – 5 of ACreate Play ListB (A pg. 61) before
continuing.
2 Press FGD E to select ADELETEB, then press ENTER.
3 Press F G to select a scene to delete, then press ENTER.
4 Perform steps 8 – 10 in ACreate Play ListB (A pg. 61).
preview the play list.
9 Press FGD E to select AOKB, then press ENTER. The play list
Play Back Play List
is created.
1 Press NAVIGATION. The Library Database Navigation screen
To modify the points
A Press D E to select AMODIFYB, then press ENTER.
B Repeat steps 5 – 9 as necessary.
appears.
2 Press FGD E to select APLAY LISTB, then press ENTER.
3 Press FGD E to select the
NAVIGATION > PLAY LIST
normal screen.
index (small pictures) of the
0026 [FISH WORLD
026 CREATED 26/12/03 FRI
TEDDY BEAR 25/12
]
143 MIN
desired play list, then press
ENTER.
● When you want the plural play
lists to be played back
continuously, press MEMO
after selecting the desired play
lists. The numbers of the
[MOVIES]
NOTES:
001
004
007
002
005
008
003
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
● The title, index and category of the play list can be modified in the
same way as AORIGINALB. (A pg. 58)
SELECT WITH @
THEN PRESS [ENTER]
006
009
PRESS [NAVIGATION]
TO EXIT
NAVIGATION
EXIT
ENTER
SELECT
● You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest
edition, etc.
playback order appear on the index. You can select up to 30
play lists.
● When you want to correct the order, move the arrow to the
desired index and press MEMO. The number disappears and
the unit re-numbers the other play lists automatically.
● When you want to cancel the order, press CANCEL(L).
Edit Scenes
1 Press EDIT. The Editing screen appears.
2 (DVD deck only) Press FGD E to select AMODIFYB under
4 Press D E to select ABEGINNINGB, then press ENTER. The
AORIGINAL/PLAY LISTB, then press ENTER.
playback starts.
3 Press FGD E to select AMODIFYB under APLAY LISTB, then
press ENTER.
5 Press W to pause playback.
● To resume normal playback, press I.
4 Press FGD E to select a play list to modify, then press ENTER.
5 Press FGD E to select ASCENEB, then press ENTER.
6 Press FGD E to select AMODIFYB, then press ENTER.
7 Press FGD E to select a scene to modify, then press ENTER.
8 Perform steps 5 – 10 in ACreate Play ListB (A pg. 61).
6 Press o to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
62
Delete Play List
Edit Library Information
1 Press EDIT. The Editing screen appears.
2 (DVD deck only) Press FGD E to select AMODIFYB under
AORIGINAL/PLAY LISTB, then press ENTER.
3 Press FGD E to select ADELETEB under APLAY LISTB, then
press ENTER.
Title information can be registered in the unit’s memory for up to
600 DVD discs, 2,000 titles. It is helpful when finding a desired title
(or play list) by sorting according to the sort options registered
during (or after) recording.
4 Press FGD E to select one play list you want to delete, then
press ENTER.
5 Press D E to select ADELETEB, then press ENTER.
● When you cancel the deletion, select ACANCELB, then press
ENTER.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
6 Press EDIT to return to the normal screen.
CABLE/SAT
NOTE:
TV
DVD
information are not affected at all.
HDD
DVD
Modify Index
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 61) before
continuing.
B Perform steps 5 – 8 of AModify IndexB (A pg. 58).
Modify Play List Name
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 61) before
continuing.
NAVIGATION
ENTER
rtwe
B Perform steps 2 – 5 of AModify Title NameB (A pg. 58).
Modify Category
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 61) before
continuing.
B Perform steps 2 – 4 of AModify CategoryB (A pg. 59).
Scan For Title From Library
1 Press NAVIGATION. The Library Database Navigation screen
appears.
2 Press FGD E to select the
NAVIGATION
appropriate sort button to sort
DVD NAVIGATION
the information, then press
ORIGINAL
PLAY LIST
ENTER.
ADATEB:
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
TO EXIT
DVD LIBRARY
Sort by date
ADISC No.B:
Sort by disc number
ACATEGORYB:
Sort by category
ANAMEB:
DATE
DISC No.
NAME
ENTER
NAVIGATION
EXIT
CATEGORY
A
SELECT
Sort by name
● ADATEB and ADISC No.B are available for the DVD deck only.
3 Press FGD E to select the desired title, then press ENTER.
● Playback begins automatically after the selected title is located.
NOTE:
If a disc registered in the library is recorded or modified on DVD
units from other manufacturers, it may become impossible to
operate properly.
Register Disc
When a disc that is not registered in the library is loaded, a
message appears confirming if the disc should be registered. If
registering, perform the following procedure.
1 Press D E to select AREGISTERB, then press ENTER to confirm
the registration.
2 Press NAVIGATION to return to the normal screen.
NOTES:
● It is not possible to register discs formatted on devices other than
JVC’s DVD recorders.
● It is not possible to register discs recorded on devices other than
JVC’s DVD recorders.
● It is not possible to register discs when ASAVE AS LIBRARYB is
set to AOFFB. (A pg. 79)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
63
Locating The Desired Group And Tracks
Playback With MP3/WMA/JPEG
Navigation
1 Load a disc.
2 Press NAVIGATION.
3 Press FGD E to select AORIGINALB, then press ENTER.
4 Press F G to select the
NAVIGATION > ORIGINAL
desired group, then press
GROUP
:
001/100
TRACK
:
001/100
0 : 07 : 01
This unit can play back discs that MP3/WMA sound files and JPEG
image files taken with digital still cameras or other devices are
recorded.
The MP3/WMA/JPEG Navigation enables you to search and select
the desired files recorded on CD-R/RW or CD-ROM discs very
easily.
ENTER.
● A list of files in the selected
group appears.
IT’S SHOWTIME ! ! /B’z
ROOT
001. IT’S SHOWTIME ! ! /B’z
CLASSIC
002. ONLY FLOWER IN THE WORLD/SMAP
003. SEXY GUY/GOMAKI
CLUB
DANCE
004. HEY?/AYAYA
EUROPE
005. DOOR TO TOMORROW/I WISH
006. REASON/ASAMI
FOREIGN GROUP
FOREIGN ROCK
007. DIE ANOTHER DAY/JAMES BOND
5 Press F G to select the
desired item, then press
ENTER. The unit starts
playback from the selected
item.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press DVD to select the DVD deck.
NAVIGATION > ORIGINAL
GROUP
:
001/100
TRACK
:
001/100
0 : 07 : 01
IT’S SHOWTIME ! ! /B’z
ROOT
001. IT’S SHOWTIME ! ! /B’z
CLASSIC
002. ONLY FLOWER IN THE WORLD/SMAP
003. SEXY GUY/GOMAKI
CLUB
DANCE
004. HEY?/AYAYA
● The unit stops when all items
played back.
EUROPE
005. DOOR TO TOMORROW/I WISH
006. REASON/ASAMI
FOREIGN GROUP
FOREIGN ROCK
007. DIE ANOTHER DAY/JAMES BOND
NAVIGATION > ORIGINAL
GROUP
:
001/100
TRACK
:
001/100
0 : 07 : 01
NOTES:
IT’S SHOWTIME ! ! /B’z
ROOT
001. IT’S SHOWTIME ! ! /B’z
● If you press SELECT(I) instead of ENTER in step 4, the unit
starts playback from the first file of the group.
CLASSIC
002. ONLY FLOWER IN THE WORLD/SMAP
003. SEXY GUY/GOMAKI
CLUB
DANCE
004. HEY?/AYAYA
● JPEG files are played back as a slide show at the set intervals.
(A pg. 32)
EUROPE
005. DOOR TO TOMORROW/I WISH
006. REASON/ASAMI
FOREIGN GROUP
FOREIGN ROCK
007. DIE ANOTHER DAY/JAMES BOND
● If a file name includes any 2-byte character, the unit may not
show the file name correctly.
● The order of the groups and items shown in steps 4 and 5 may
differ from the order shown on your PC.
A Selected group number/total number of groups on the disc
B Selected file number/total number of files in the group that
contains the selected file
C Elapsed time (MP3 only)
D Name of the selected file
E Group name
F Selected file
NOTES:
● If there are more than 100 files, the rest of the files are not
displayed. In this case, press ON SCREEN to display them on
the TV screen.
● If both MP3 files and WMA files are recorded on the same disc,
WMA files cannot be played back as they are not displayed on
the navigation screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
64
5 Press FGD E to select indexes (small pictures) of desired
original recordings and/or play lists, then press MARK. After
selecting all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings and/or play lists.
● The recordable time of the disc is displayed on the bar meter.
For details, refer to AAbout Disc Remaining DisplayB (A pg. 67)
Dubbing
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
6 Press D E to select AEXECUTEB, then press ENTER to start
dubbing.
CABLE/SAT
NOTES:
TV
DVD
● Play lists are dubbed as programmes.
HDD
VHS
● In Video mode, if the selected play list includes the scenes
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
● During dubbing, it is not possible to play back on HDD or DVD, or
to set timer programming.
DVD
MARK
DUBBING
ENTER
Just Dubbing (From HDD To DVD)
By using Just Dubbing function, when dubbing all selected original
recordings and/or play lists, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the selected recordings and/or play lists to be dubbed
and the available disc space.
rtwe
4
1 Load a recordable disc.
7
8
9
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AHDDNDVDB, then press ENTER.
4 Press FGD E to select AJUSTB, then press ENTER.
ON SCREEN
5
Perform steps
5
–
6
of AHigh Speed Dubbing (From HDD To DVD)B.
AUDIO
NOTES:
● Play lists are dubbed as programmes.
NOTES:
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
However, the lower transfer rate cannot be dubbed in the higher
transfer rate.
● The recordable time of the disc is displayed on the bar meter. For
details, refer to AAbout Disc Remaining DisplayB (A pg. 67)
● During dubbing, it is not possible to play back on HDD or DVD, or
to set timer programming.
● It is not possible to dub simultaneously when timer programming
is set. Select either dubbing or timer programming.
● The order of the index which are displayed by pressing
NAVIGATION or EDIT.
activated, and the original S-VHS resolution cannot be obtained.
● When dubbing from HDD or DVD to VHS, the colour system of
the VHS deck must be set in accordance to the signal to be
recorded. (A pg. 82) When dubbing from VHS to HDD or DVD,
the colour system of both the VHS deck (playback) and HDD or
DVD deck (recording) must be set. (A pg. 79, 82)
Manual Dubbing (From HDD To DVD)
1 Load a recordable disc.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AHDDNDVDB, then press ENTER.
4 Press FGD E to select AMANUALB, then press ENTER.
High Speed Dubbing (From HDD To DVD)
It is possible to dub the original recordings and/or play lists on the
HDD deck to DVD discs. The dubbing is performed in high speed,
keeping the original transfer rate.
5 Perform step 5 of AHigh Speed Dubbing (From HDD To DVD)B.
The Manual Dubbing screen appears.
NOTES:
6 Press F G to select AREC MODEB, then press ENTER. Press
● After accessing the Dubbing Menu screen, it is not possible to
take out a disc.
F G to select the desired option, then press ENTER.
● It is not possible to dub copy-once titles in Video mode.
● When dubbing a copy-once title, the data will be moved from
HDD to DVD upon completing dubbing.
● When you cancel dubbing a copy-once title during dubbing, the
original recording on the HDD deck remains and the title copied
to a DVD disc is deleted.
● It is not possible to dub play lists which contain copy-once titles.
● It is not possible to dub the following programmes to DVD-R/RW
disc (Video mode):
● which contains more than one audio language.
● which is on the play list.
7 Press G to select ACONFIRMB, then press ENTER.
8 Press D E to select AEXECUTEB, then press ENTER to start
dubbing.
NOTES:
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
However, the lower transfer rate cannot be dubbed in the higher
transfer rate.
● The recordable time of the disc is displayed on the bar meter. For
details, refer to AAbout Disc Remaining DisplayB (A pg. 67)
● During dubbing, it is not possible to play back on HDD or DVD, or
to set timer programming.
● which is edited (also RetroActive Recording).
● which is recorded in LP mode or FP155-FP240 mode.
● Recording may not be performed in the highest speed depending
on the characteristics of the disc used.
1 Load a recordable disc.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AHDDNDVDB, then press ENTER.
4 Press FGD E to select AHIGH SPEEDB, then press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
65
Dubbing From HDD To VHS
It is possible to perform dubbing from the HDD deck to the VHS
deck.
Dubbing From DVD To VHS
It is possible to perform dubbing from the DVD deck to the VHS
deck.
1 Load a cassette with the record safety tab intact.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AHDDNVHSB, then press ENTER.
1 Load the disc you want to dub onto the DVD deck, and a
cassette with the record safety tab intact to the VHS deck.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select ADVDNVHSB, then press ENTER.
4 Press FGD E to select indexes (small pictures) of desired
original recordings and/or play lists, then press MARK. After
selecting all indexes you want to dub, press ENTER.
4 Press FGD E to select indexes (small pictures) of desired
original recordings and/or play lists, then press MARK. After
selecting all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings and/or play lists.
● You can select up to 8 original recordings and/or play lists.
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER. The confirmation screen appears.
6 Press F G to select ASELECT SND. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
6 Press F G to select ASELECT SND. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
8 Press VHS so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
8 Press VHS so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
9 Press I to locate the point from where you want to start
dubbing, then press R and W simultaneously so that the VHS
deck enters the record pause mode.
9 Press I to locate the point from where you want to start
dubbing, then press R and W simultaneously so that the VHS
deck enters the record pause mode.
10Press HDD so that the HDD lamp lights up on the unit.
● The dubbing screen will appear.
10Press DVD so that the DVD lamp lights up on the unit.
● The dubbing screen will appear.
11Press D E to select AEXECUTEB, then press ENTER for
confirmation.
11Press D E to select AEXECUTEB, then press ENTER to
confirm.
● To cancel the dubbing, press the o then D E to select
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
ACANCELB and press ENTER to confirm.
12Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
12Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
Original Dubbing (From DVD To HDD)
It is possible to dub the original recordings on DVD discs to the
HDD deck.
NOTES:
● It is not possible to dub play lists on DVD discs.
● It is not possible to dub Video CDs/SVCDs or Audio CDs.
● When dubbing is in progress, only o is functional.
1 Load a disc you want to dub.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select ADVDNHDDB, then press ENTER.
4 Press FGD E to select indexes (small pictures) of desired
original recordings and/or play lists, then press MARK. After
selecting all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings and/or play lists.
5 Press D E to select AEXECUTEB, then press ENTER to start
dubbing.
NOTES:
● It is not possible to dub play lists on DVD discs.
● It is not possible to dub pre-recorded DVD VIDEO discs.
● It is not possible to dub Video CDs/SVCDs or Audio CDs.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
66
11Press D E to select AEXECUTEB, then press ENTER for
confirmation.
Dubbing From VHS To HDD
(Dubbing An Entire Cassette)
It is possible to perform automatic dubbing of all the recorded
programmes of a cassette from the VHS deck to the HDD deck
using the AENTIREB dubbing.
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
12Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
1 Load the cassette you want to dub.
● Set APICTURE CONTROLB to AEDITB. (A pg. 81)
NOTES:
● AO.S.D.B is automatically set to AOFFB. It will return to AAUTOB
after dubbing is completed.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AVHSNHDDB, then press ENTER.
4 Press D E to select AENTIREB, then press ENTER.
● The programme information at the VHS deck will not be dubbed.
● When there are blanks on the tape of more than 2 seconds, the
HDD deck will enter into pause mode. Dubbing will resume once
recorded portion is detected.
● Dubbing copyright guarded tape is not possible.
● When you select AEDITB to dub tapes in step 1, be sure to select
ANORMB after you finish dubbing the tapes.
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
6 Press F G to select ASELECT SND. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
● When dubbing is in progress, only o is functional.
7 Press G to select ACONFIRMB, then press ENTER. The
Dubbing From VHS To DVD
(Dubbing An Entire Cassette)
It is possible to perform automatic dubbing of all the recorded
programmes of a cassette from the VHS deck to the DVD deck
using the AENTIREB dubbing.
confirmation screen appears.
8 Press D E to select AEXECUTEB, then press ENTER for
confirmation.
● Once dubbing starts, it will continue dubbing until the end of the
tape is reached.
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
● If the tape is not rewind, the unit will start dubbing after
automatically rewinding the tape to the beginning.
1 Load the cassette you want to dub.
● Set APICTURE CONTROLB to AEDITB. (A pg. 81)
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AVHSNDVDB, then press ENTER.
4 Press D E to select AENTIREB, then press ENTER.
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
● The tape will automatically be rewound.
NOTES:
● AO.S.D.B is automatically set to AOFFB. It will return to AAUTOB
after dubbing is completed.
6 Press F G to select ASELECT SND. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
● The programme information at the VHS deck will not be dubbed.
● When there are blanks on the tape of more than 2 seconds, the
HDD deck will enter into pause mode. Dubbing will resume once
recorded portion is detected.
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
● Dubbing copyright guarded tape is not possible.
● When you select AEDITB to dub tapes in step 1, be sure to select
ANORMB after you finish dubbing the tapes.
8 Press D E to select AEXECUTEB, then press ENTER for
confirmation.
● Once dubbing starts, it will continue dubbing until the end of the
tape is reached.
● When dubbing is in progress, only o is functional.
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
● If the tape is not rewind, the unit will start dubbing after
automatically rewinding the tape to the beginning.
Dubbing From VHS To HDD
(Dubbing A Programme From Cassette)
It is possible to dub a single title (programme) of a cassette from
the VHS deck to the HDD deck using the A1 PROG.B dubbing.
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
1 Load the cassette you want to dub.
● The tape will automatically be rewound.
● Set APICTURE CONTROLB to AEDITB. (A pg. 81)
NOTES:
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AVHSNHDDB, then press ENTER.
4 Press D E to select A1 PROG.B, then press ENTER.
● AO.S.D.B is automatically set to AOFFB. It will return to AAUTOB
after dubbing is completed.
● The programme information at the VHS deck will not be dubbed.
● When there are blanks on the tape of more than 2 seconds, the
DVD deck will enter into pause mode. Dubbing will resume once
recorded portion is detected.
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
● Dubbing copyright guarded tape is not possible.
● When you select AEDITB to dub tapes in step 1, be sure to select
ANORMB after you finish dubbing the tapes.
6 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
7 Press VHS so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
● When dubbing is in progress, only o is functional.
8 Press AUDIO to select the playback sound.
9 Press I to locate the point from where you want to start
dubbing, then press W.
VHS deck enters the record pause mode.
10Press HDD so that the HDD lamp lights up on the unit.
The current display on the screen will be switched to the
dubbing screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
67
About Disc Remaining Display
When dubbing from HDD to DVD, the unit displays the time
information for dubbing by bar meter. By comparing the disc
remaining time and the necessary time for dubbing of the selected
items, it is possible to check if the dubbing can be performed
completely or not.
Dubbing From VHS To DVD
(Dubbing A Programme From Cassette)
It is possible to dub a single title (programme) of a cassette from
the VHS deck to the DVD deck using the A1 PROG.B dubbing.
1 Load the cassette you want to dub.
When performing the High Speed Dubbing
● Set APICTURE CONTROLB to AEDITB. (A pg. 81)
2 Press DUBBING to access the Dubbing Menu screen.
3 Press FGD E to select AVHSNDVDB, then press ENTER.
4 Press D E to select A1 PROG.B, then press ENTER.
Capacity of a disc
Remaining capacity
21%
5 Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
6 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
7 Press VHS so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
When performing the Just Dubbing
TOTAL 105MIN
8 Press AUDIO to select the playback sound.
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The total time of a loaded disc is displayed on the right of the bar
meter.
9 Press I to locate the point from where you want to start
dubbing, then press W.
VHS deck enters the record pause mode.
10Press DVD so that the DVD lamp lights up on the unit.
The current display on the screen will be switched to the
dubbing screen.
When performing the Manual Dubbing
11Press D E to select AEXECUTEB, then press ENTER for
MAX FR240
confirmation.
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The available highest transfer rate is displayed on the right of the
bar meter.
12Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
NOTE:
The bar meter moves up and down regularly, but this is not a
malfunction.
NOTES:
● AO.S.D.B is automatically set to AOFFB. It will return to AAUTOB
after dubbing is completed.
● The programme information at the VHS deck will not be dubbed.
● Dubbing copyright guarded tape is not possible.
● When you select AEDITB to dub tapes in step 1, be sure to select
ANORMB after you finish dubbing the tapes.
● When dubbing is in progress, only o is functional.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
68
The following on-screen display for DV dubbing appears when
ON SCREEN is pressed while the channel has been set to ADVB.
DV Dubbing (HDD & DVD Deck Only)
0:00
FR360 00:00:00. 00
12bit
DV JVC
1:00
2:00
GR-DV3500
00:00:00. 00
DV
HDD
You can dub programmes from a camcorder or DV equipment
connected to the unit with a DV cable. The unit’s remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
L
–
R
GR-DV3500
SOUND1
NOTES:
1
2
DV
DV
● Use the DV cable VC-VDV 204U for connection.
● When you connect a PC to the [DV IN] connector, we do not
assure the normal operation of this unit.
A
B
C
A Remote control switch
To switch between the devices operable by the remote control
unit. The unit is operable when the remote icon (
Your unit
)
displayed faces to the left, while the DV device is operable
when the remote icon is facing to the right.
Select to start or pause the dubbing. If ENTER is pressed when
the DV device is in the pause condition, preroll editing* where it
is possible to dub with a start time that is highly accurate will be
activated. When the DV device cannot be operated from the
unit (such as in camera mode), proceed with normal recording
(A pg. 34, 37).
To [DV IN]
* Preroll editing refers to the playback after the DV tape is slightly
rewind. (For DV devices that do not support the –1x speed, the
rewinding time may be longer.)
C Sound monitor switch
Camcorder
DV cable
For selecting the desired sound format for dubbing.
(VC-VDV 204U)
(not supplied)
1 Connect a camcorder or DV equipment to the [DV IN]
connector on the unit’s front panel.
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
on the remote so that the HDD lamp lights up on the unit.
3 Press PR +/– to set the channel to ADVB.
4 Press ON SCREEN.
DV connector
● The on-screen display for DV dubbing appears.
5 Press D E to select
, then press ENTER to display
DV equipment
the remote icon (facing to the right) for the DV equipment.
6 Press REC MODE repeatedly to set the recording mode.
7 Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control: I, N, O, o, W.
● To play back in slow speed (1/10 of the normal speed), press W
to pause playback, then press O or N.
● To play back frame-by-frame, press W to pause playback, then
press W repeatedly. Each press of W advances a frame.
● To change the playback direction, press O or N.
8 Press D E to select
, then press ENTER repeatedly
until the desired sound track appears on the TV screen.
SOUND 1:
Select this to record the original stereo sound played back on
the connected DV equipment.
SOUND 2:
Select this to record the dubbed stereo sound played back on
the connected DV equipment.
MIX:
Select this to record the sound of both ASOUND 1B and
ASOUND 2B.
● Note that this selection is not available when the source
programme is recorded in 16BIT (48 kHz) mode.
9 Press D E to select
, then press ENTER. The
dubbing starts.
● Playback on the external DV equipment and recording on the
unit should start simultaneously.
● To pause dubbing, press D E to select
, then press
ENTER. Both the unit and the external DV equipment pause
dubbing. Pressing W on the unit also works the same way.
10Press D E to select
press o. The DV equipment stops.
11Press D E to select , then press ENTER.
, then press ENTER. Then
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
69
12Press o twice on the remote control to stop dubbing.
● Both the unit and the external DV equipment stop dubbing.
NOTES:
● Dubbing copyright guarded programmes is not possible.
● Original DV information such as the recording date and time are
not recorded.
● The superimposed indication during the operation or dubbing is
not recorded.
● If the dubbing is paused while the channel is set to ADVB, you
cannot switch channels.
When you dub from DV equipment other than a
camcorder
A Perform step 1 to 4.
B Locate the point from where you want to start dubbing,
then stop on the DV equipment.
● If you pause the DV equipment in this step, a few
the recorded programme.
C
Set the input mode to ADV INPUTB on the DV equipment.
● If you select an input mode other than ADV INPUTB,
unwanted pictures may be recorded at the beginning of
the recorded programme.
D Perform step 9 to 12.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press D E to select
.
Locate the point where you want to restart dubbing by pressing I,
N, or O, then press o.
Press D E to select
dubbing.
, then press ENTER to restart
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
70
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Edit From A Camcorder
1 Make connections.
You can use a camcorder as the source player and your unit as the
recording deck.
A If the camcorder has no S-VIDEO output connector:
^ connect the camcorder’s AUDIO/VIDEO OUT connectors to
the unit’s [VIDEO/AUDIO ((MONO) L/R)] input connectors
on the front panel.
A If the camcorder has no S-VIDEO output connector:
● When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO-L] input connector on your unit.
B If the camcorder has an S-VIDEO output connector: (HDD &
DVD deck only)
^ connect the camcorder’s AUDIO OUT and S-VIDEO OUT
connectors to the unit’s [AUDIO] and [S-VIDEO] input
connectors on the front panel.
Recorder
To [VIDEO/AUDIO
((MONO) L/R)] input
2 Press VHS/HDD/DVD SELECT on the unit repeatedly to select
the recording deck.
Audio/video cable
(not supplied)
3 Press PR +/– to select AF-1B.
● Set AF-1 INPUTB to AVIDEOB for the [AUDIO] input connector, or
AS-VIDEOB for the [S-VIDEO] input connector, depending on
the connector being used. (A pg. 73)
4 Press REC MODE repeatedly to set the recording mode.
5 Start playback on the camcorder slightly before the actual point
Player
from where you wish to start dubbing.
6 Press R on the unit to start recording. Or while holding R, press
I on the remote control. The dubbing starts.
AUDIO/VIDEO OUT
7 Press o on the unit, then stop playback on the camcorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● Refer to the camcorder’s instruction manual for operating
procedure.
● The quality of dubbed picture becomes poorer than that of the
original.
B If the camcorder has an S-VIDEO output connector (HDD
& DVD deck only):
To [S-VIDEO]
input
To [AUDIO] input
Recorder
Audio cable
(not
supplied)
S-video cable
(not supplied)
S-VIDEO OUT
AUDIO OUT
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
71
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Edit To Or From Another Recorder
1 Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
A When using your unit as the source player:
^ connect its [L-1 IN/OUT] connector to the recording deck.
B When using your unit as the recording deck:
^ connect its [L-2 IN/DECODER] connector to the source
player.
● If another recorder is compatible with the Y/C signal: (HDD &
DVD deck only)
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
A When using your unit as the source player
^ when using your unit as the source player, set AL-1
OUTPUTB to ASCART S-VIDEOB. (A pg. 72)
^ when using your unit as the recording deck, set AL-2
SELECTB to AS-VIDEOB. (A pg. 72)
Player
TV receiver
Your unit
DVD SELECT on the unit repeatedly to select the recording
deck.
21-pin SCART cable
(supplied)
3 When using this unit as the recording deck, press PR +/– to
select AL-2B.
21-pin SCART cable
(not supplied)
For HDD/DVD deck
● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)
4 When using this unit as the recording deck, press REC MODE
repeatedly to set the recording mode.
Another recorder
5 Engage the Play mode of the source player.
6 Engage the Record mode of the recording deck.
Recorder
7 Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
● All necessary cables can be obtained from your dealer.
● For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
set ASUPERIMPOSEB or AO.S.D.B to AOFFB before starting.
(A pg. 80, 81) If you are using another recorder with S-Video
and Audio output connectors, connect its S-Video and Audio
output connectors to this unit’s [S-VIDEO] and [AUDIO] input
connectors on the front panel. Then, set the unit’s input mode to
AF-1B in step 3, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 73)
B When using your unit as the recording deck
TV receiver
Recorder
Your unit
21-pin SCART
cable (supplied)
21-pin SCART cable
(not supplied)
Another recorder
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
72
SCART RGB:
If a connected appliance’s input is compatible with RGB
signals, set to ASCART RGBB. You can obtain a high-quality
RGB picture.
Output/Input Set
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
COMPONENT:
If a connected appliance’s input is compatible with Y/PB/PR
signals, set to ACOMPONENTB. You can obtain a high-quality
Y/PB/PR picture. Switch the TV to the input that you can watch
component video pictures.
CABLE/SAT
TV
DVD
8 L-1 INPUT ^ VIDEO / S-VIDEO
VIDEO:
If a connected appliance’s output is compatible only with
regular video signals, set to AVIDEOB.
S-VIDEO:
If a connected appliance’s output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain a high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
ENTER
rtwe
NOTES:
● If AL-1 OUTPUTB is set to ASCART S-VIDEOB or ASCART RGBB, it
is not possible to set AL-1 INPUTB to AS-VIDEOB.
● If AL-2 SELECTB is set to ASAT S-VIDEOB or ADECODERB, it is
not possible to set AL-1 INPUTB to AS-VIDEOB.
● If AL-2 SELECTB is set to ADECODERB, it is only possible to set
AL-1 OUTPUTB to ASCART VIDEOB.
SET UP
● Component video signals are not output from the [L-1 IN/OUT]
connector.
● When Progressive scan mode is engaged, it is not possible to
L-2 Select Setting
L-1 Output And L-1 Input Setting
The [L-1 IN/OUT] connector accepts and delivers either a composite
signal (regular video signal) or a Y/C signal (a signal in which the
Set AL-2 SELECTB to the appropriate mode depending on the type
of appliance connected to the unit’s [L-2 IN/DECODER] connector.
1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB on
luminance and chrominance signals are separated). Set
AL-1
the left column.
OUTPUT and L-1 INPUT to the appropriate mode depending on
B
A
B
the type of appliance connected to the unit’s [L-1 IN/OUT] connector.
1 Press SET UP to access the Main Menu screen.
2 Press D E to select AFUNCTION SET UPB, then press G.
3 Press D E to select AVIDEO
2 Press F G to select AL-2 SELECTB, then press ENTER.
3 Press F G to select the
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
appropriate setting, then press
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
ENTER.
MONITOR TYPE
4:3LB
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
VIDEO
VIDEO
4 Press SET UP to complete the
IN/OUTB, then press G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
setting.
SCART VIDEO
VIDEO
MONITOR TYPE
4:3LB
VIDEO
4 Press F G to select AL-1
OUTPUTB or AL-1 INPUTB,
then press ENTER.
S-VIDEO
L-2 SELECT
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
V
SAT VIDEO
SAT S-VIDEO
DECODER
SCART VIDEO
VIDEO
ENTER
SELECT
SET UP
EXIT
SELECT WITH @ THEN PRES [ENTER]
PRESS [SET UP] TO EXIT
VIDEO
SET UP
EXIT
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
* The boldface settings below indicate the settings at your purchase.
SELECT
5 Press F G to select the
appropriate setting, then press
ENTER.
8 L-2 SELECT ^ VIDEO / S-VIDEO / SAT VIDEO / SAT S-VIDEO /
DECODER
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
REC/PLAY SET UP DISPLAY SET
VIDEO IN/OUT
INITIAL SET UP
Select AVIDEOB or AS-VIDEOB to use this unit as the recording deck
with the player connected to the [L-2 IN/DECODER] connector, or
to use the satellite receiver connected to the [L-2 IN/DECODER]
connector.
MONITOR TYPE
4:3LB
VIDEO
F-1 INPUT
6 Press SET UP to complete the
L-1 OUTPUT
L-1 INPUT
SCARTVIDEO
setting.
SCART S-VIDEO
SCART RGB
\
COMPONENT
L-2 SELECT
ENTER
SELECT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
VIDEO:
If a connected appliance’s output is compatible only with
regular video signals, set to AVIDEOB.
* The boldface settings below indicate the settings at your purchase.
S-VIDEO:
If a connected appliance’s output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
8 L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART
RGB / COMPONENT
SCART VIDEO:
If a connected appliance’s input is compatible only with regular
video signals, set to ASCART VIDEOB.
Select ASAT VIDEOB or ASAT S-VIDEOB to view a satellite
programme with the TV set while the unit is turned off. (A pg. 76)
SCART S-VIDEO:
If a connected appliance’s input is compatible with Y/C signals,
set to ASCART S-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
SAT VIDEO:
If a connected satellite receiver’s output is compatible only with
regular video signals, set to ASAT VIDEOB.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
73
SAT S-VIDEO:
If a connected satellite receiver’s output is compatible with Y/C
signals, set to ASAT S-VIDEOB. You can obtain a high-quality
S-VHS picture. (For connection, be sure to use a 21-pin
SCART cable that is compatible with the Y/C signal.)
Digital Audio Dubbing
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
DECODER:
To use a decoder connected to the [L-2 IN/DECODER] connector.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
NOTES:
● If you have a satellite receiver or a decoder connected to the [L-2
IN/DECODER] connector, be sure to set AL-2 SELECTB back to
appropriate mode after editing.
Example: Dubbing to an MD
Recorder
● If you are not connecting a satellite receiver or a decoder to the
[L-2 IN/DECODER] connector, leave AL-2 SELECTB set to
AVIDEOB.
● When AL-2 SELECTB is set to ASAT VIDEOB and ASAT S-VIDEOB,
ASATB appears on the TV screen or front display panel instead of
AL-2B.
● If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible to
set AL-2 SELECTB to ADECODERB or ASAT VIDEOB.
● If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set
AL-2 SELECTB to ADECODERB or ASAT S-VIDEOB.
● If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to
ASAT VIDEOB, ASAT S-VIDEOB or ADECODERB, be sure to
connect the [L-1 IN/OUT] connector with a TV.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
Optical cable
(not supplied)
To [DIGITAL
AUDIO OUT
(COAXIAL)]
To [DIGITAL
AUDIO OUT
(OPTICAL)]
F-1 Input Setting
Set AF-1 INPUTB to the appropriate mode depending on the
Player
connector (VIDEO or S-VIDEO) being used on the front panel.
1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB
(A pg. 72).
2 Press F G to select AF-1 INPUTB, then press ENTER.
3 Press F G to select the
VIDEO IN/OUT
Rear of unit
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
appropriate setting, then press
REC/PLAY SET UP
DISPLAY SET
ENTER.
MONITOR TYPE
4:3LB
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
VIDEO
V
4 Press SET UP to complete the
VIDEO
S-VIDEO
setting.
SCART VIDEO
VIDEO
Note for connection:
Remove the protection cap from the optical cable.
ENTER
SELECT
SET UP
EXIT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
* The boldface settings below indicate the settings at your purchase.
1 Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
8 F-1 INPUT ^ VIDEO / S-VIDEO
2 Place a disc on the unit and load an MD on the connected
VIDEO:
digital audio device.
When connecting an appliance to the [VIDEO] input connector,
3 Select the audio to be dubbed.
set to AVIDEOB.
4 Start playback slightly before the actual point from where you
S-VIDEO:
wish to start dubbing.
When connecting an appliance to the [S-VIDEO] input
connector, set to AS-VIDEOB.
5 Press W to pause playback.
6 Select the input mode on the connected digital audio device.
7 Press I to start playback on the unit.
8 Start recording on the digital audio device.
9 Stop recording on the digital audio device. Then press o to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
EN
74
Remote Control Functions
Remote Control 1/2/3/4 Code Switching
CABLE/SAT
TV DVD
TV AV /VIDEO
TV
1
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of four codes
(1, 2, 3 or 4). The remote control is preset to send 3 code signals
because your unit is initially set to respond to 3 code signals. You
can easily modify your unit to respond to 1, 2 or 4 code signals.
TV % +/–
0 – 9
PR +/–
● Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
SET UP
A
I
CABLE/SAT
TV
DVD
1 – 4
TV Multi-Brand Remote Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
ENTER
● Turn off the TV using its remote control.
● Slide the TV/CABLE/SAT/DVD switch to TV.
IMPORTANT:
Although the provided remote control unit is compatible with JVC
televisions, as well as many other models, it may not work with
your TV, or in some instances, may have limited function
capability.
o
SET UP
● Keep pressing SET UP down during step 1.
1 Enter your TV’s brand code using the number keys, then press
ENTER.
2 Press A on the unit’s remote control to turn on the TV and try
operations (A step 3).
● Once you have set the remote control to operate the TV, you do
not have to repeat this step until you replace your remote
control’s batteries.
● Some brands of TVs have more than one code. If the TV does
not function with one code, try entering another.
● Keep pressing SET UP down during step 1.
1 Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4 to
change the remote control code, then press ENTER.
2 Press A on the unit to turn off the unit.
3 Press I on the unit for over 5 seconds while the unit is turned
3 Press the corresponding buttons to operate the TV: A, TV AV/
VIDEO, PR +/–, TV8 +/–, TV d, number keys.
● For some brands of TVs, you must press ENTER after having
pressed the number keys.
4 Press o on the remote control to change the unit’s code. The
code currently set on the remote control blinks on the front
display panel for approximately 5 seconds, and is applied to the
unit.
NOTE:
When APOWER SAVEB is set to AONB (A pg. 80), it is not possible
to change the remote code.
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
EN
75
BRAND NAME
CODE
BRAND NAME
CODE
JVC
01, 23, 24, 25
JVC
72, 73
FERGUSON
FINLUX
FUNAI
27
30
32
AMSTRAD
CANAL +
D-BOX
60, 61, 62, 63, 92
81
85
LG/GOLDSTAR
GRUNDIG
HITACHI
ITT
MITSUBISHI
MIVAR
18
19
10
28
03
29
20
31
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
82
68
89
88
64, 65
64
68
70, 71
68
93
GALAXIS
GRUNDIG
HIRSCHMANN
ITT NOKIA
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RFT
SAGEM
NEC
NOKIA
PANASONIC
PHILIPS
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
04, 11
02
05
12, 33, 34, 35
13, 16
06
07
26
70
87
67, 86, 92
13, 14, 74
66, 84
69
08, 14
83
SALORA
SAMSUNG
SKYMASTER
TPS
TRIAX
WISI
68
05, 24
69
83
91
Satellite Receiver Multi-Brand Remote Control
Your remote control can operate the basic functions of your
satellite receiver set. In addition to JVC satellite receivers, other
manufacturer’s satellite receivers can also be controlled.
64
● Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.
IMPORTANT:
Although the provided remote control unit is compatible with JVC
satellite receivers, as well as many other models, it may not work
with your satellite receiver, or in some instances, may have limited
function capability.
● Keep pressing SET UP down during step 1.
1 Enter your satellite receiver’s brand code using the number
keys, then press ENTER.
2 Press A on the unit’s remote control to turn on the satellite
receiver and try operations (A step 3).
● Once you have set the remote control to operate the satellite
receiver, you do not have to repeat this step until you replace
your remote control’s batteries.
● Some brands of satellite receivers have more than one code. If
the satellite receiver does not function with one code, try
entering another.
3 Press the corresponding buttons to operate the satellite
receiver: A, PR +/–, number keys.
● For some brands of satellite receivers, you must press ENTER
after having pressed the number keys.
● The number keys may not function with some satellite
receivers.
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTIONS
EN
76
Perfect Connections (Recommended)
This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector if you
2 IN/DECODER] connector to the satellite receiver’s connector.
Then connect the satellite receiver and TV.
Connecting To A Satellite Receiver
Simple Connections
This is an example of a simple connection if your TV has one
Connect the satellite receiver to the [L-2 IN/DECODER] connector,
then connect the [L-1 IN/OUT] connector to the TV’s connector.
NOTES:
● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)
● You can use the Automatic Satellite Programme Recording
function (A pg. 53) with this connection. (HDD deck only)
● To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that AL-2B appears on the front display
panel.
NOTES:
● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)
● You can use the Automatic Satellite Programme Recording
function (A pg. 53) with this connection. (HDD deck only)
● To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that AL-2B appears on the front display
panel.
● To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
● For details, refer to the instruction manual of the satellite receiver
and decoder.
● For details, refer to the instruction manual of the satellite
receiver.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
Aerial
Outdoor unit
TV aerial cable
Satellite cable
TV aerial cable
ANTENNA IN
ANTENNA OUT
Satellite receiver
ANTENNA IN
ANTENNA OUT
TV
Decoder
TV
IMPORTANT
When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB
(A pg. 72), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the unit is turned off. When the unit is
in Stop mode or recording, press TV AV/VIDEO on the remote
control to turn off the VIDEO indicator on the front display panel.
● If you turn on the unit when the satellite receiver’s power is off,
nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV AV/
VIDEO on the remote control to set the unit to the AV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTIONS
EN
77
When you can’t switch the audio channel of a bilingual
programme
Connecting To A Dolby Digital Decoder
Or An Amplifier With Built-in DTS
When the unit is connected with a digital audio device using an
optional optical cable and ADIGITAL AUDIO OUTB is set to
ADOLBY DIGITAL/PCMB, it is not possible to switch the audio
channel of a bilingual programme recorded on a DVD-RAM or
DVD-RW (VR mode) disc. In this case, perform the following steps
using the remote control to switch ADIGITAL AUDIO OUTB from
ADOLBY DIGITAL/PCMB to APCM ONLYB.
These instructions enable you to connect your unit to a Dolby
Digital Decoder or an amplifier with built-in DTS.
B Press D E to select ADVD VIDEO SET UPB, then press G.
C Press D E to select AAUDIO OUTPUTB, then press G.
D Press F G to select ADIGITAL AUDIO OUTB, then press
ENTER.
E Press F G to select APCM ONLYB, then press ENTER.
(A pg. 78)
F Press SET UP to complete the setting.
G Press AUDIO to select the desired audio channel.
Dolby Digital Decoder or
amplifier with built-in DTS
To DIGITAL AUDIO input
Connecting/Using A Decoder
(HDD & DVD Deck Only)
Coaxial cable
(not supplied)
Optical cable
(not supplied)
The [L-2 IN/DECODER] connector can be used as an input
connector for an external decoder (descrambler). Simply connect a
decoder and you can enjoy a variety of programming that is
available through scrambled channels.
To [DIGITAL AUDIO
OUT (COAXIAL)]
To [DIGITAL AUDIO
OUT (OPTICAL)]
Decoder
TV aerial cable
Rear of unit
[L-1 IN/OUT]
TV
Note for connection:
Remove the protection cap from the optical cable.
[L-2 IN/DECODER]
RF cable (supplied)
1 Connect the unit and a Dolby Digital Decoder or an amplifier
optional coaxial cable.
NOTES:
1 Set AL-2 SELECTB to ADECODERB. (A pg. 72)
● For Dolby Digital sound, set ADIGITAL AUDIO OUTB to ADOLBY
DIGITAL/PCMB. (A pg. 78)
2 Connect your unit’s [L-2 IN/DECODER] connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART
cable.
● For DTS sound, set ADIGITAL AUDIO OUTB to ASTREAM/PCMB.
(A pg. 78)
3 Perform the procedure as described in AWhen Receiving A
CAUTIONS:
Scrambled Broadcast (HDD & DVD Deck Only)B (A pg. 85).
● This unit has a dynamic range of more than 110 dB with regards
to its Hi-Fi audio capability. It is recommended that you check the
maximum level if you are going to listen to the Hi-Fi audio signals
through a stereo amplifier. A sudden surge in the input level to
the speakers may damage them.
● Some speakers and televisions are specially shielded to prevent
television interference. If both are of the non-shielded type, do
not place the speakers adjacent to the TV set as this can
adversely affect the playback picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
78
* The boldface settings below indicate the settings at your purchase.
Mode Set
AUDIO OUTPUT
(HDD & DVD Deck Only)
8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
DOLBY DIGITAL/PCM:
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
CABLE/SAT
TV
DVD
STREAM/PCM:
HDD
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
DVD
PCM ONLY:
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
● This setting also functions when HDD is active.
● If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
ENTER
rtwe
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
SET UP
STEREO:
Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUT] connectors connected to a
stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
AUDIO
DOLBY SURROUND:
Various modes of this unit are categorized into menus nested in 2
modes, find the desired mode in the menu (for details on each
menu, see pages 78 through 80), then follow the procedure below.
Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUT] connectors connected to an amplifier/
receiver with a built-in surround decoder or a surround decoder.
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
DVD VIDEO SET UP
PARENTAL LOCK (A pg. 33)
DISC PLAY SET UP (A pg. 79)
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP (A pg. 79)
DVD SET UP (A pg. 79)
NORMAL:
Normally select this setting to activate this function.
WIDE RANGE:
REC/PLAY SET UP (A pg. 79)
DISPLAY SET (A pg. 80)
VIDEO IN/OUT (A pg. 21, 72)
Select this to deactivate this function when you enjoy wide
dynamic range programme.
TV MODE:
speaker(s).
TUNER SET (A pg. 83)
CLOCK SET (A pg. 86)
NOTES:
● This function has no effect on programmes other than that
recorded in Dolby Digital format.
● The procedure below shows how to set the desired option of the
AAUDIO RECB mode as an example.
● This function does not work when Simulated Surround Effect is
activated. (A pg. 31)
● The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press D E to select AFUNCTION SET UPB, then press G.
4 Press D E to select AREC/
8 OUTPUT LEVEL ^ STANDARD / LOW
You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
PLAY SET UPB, then press G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
XP MODE REC AUDIO
DOLBY DIGITAL
5 Press F G to select AAUDIO
STANDARD:
AUDIO REC
DIRECT REC
NICAM
OFF
RECB, then press ENTER.
Normally select this setting.
INPUT COLOUR SYSTEM
JUMP TIME
PAL
6 Press F G to select the
desired option, then press
ENTER.
LOW:
15 MIN
The output level of analogue audio is lowered.
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SELECT
7 Press SET UP to complete the
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
79
DISC PLAY SET UP
REC/PLAY SET UP
8 RESUME ^ OFF / ON / DISC RESUME
8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
When this function is set to AONB or ADISC RESUMEB, you can use
the resume function. (A pg. 26)
You can select the audio format when you record a title in XP
mode. When this function is set to ALINEAR PCMB, you can obtain
a high-quality audio sound.
OFF:
You cannot use the resume function.
DOLBY DIGITAL:
To record in Dolby Digital format.
ON:
You can start playback from the resume point of the placed
disc.
LINEAR PCM:
To record in Linear PCM format.
DISC RESUME:
8 AUDIO REC ^ NICAM / MONO
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NOTE:
NICAM:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
To record the main and sub language of NICAM audio.
MONO:
To record the standard (monaural) sound of NICAM audio.
NOTE:
HDD SET UP
This function works only for the NICAM bilingual programme.
8 LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can
apply the selected time length to ATemporary recording for Live
8 DIRECT REC ^ OFF / ON
NOTES:
DVD SET UP
● When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART
cable between the unit and the TV. (A pg. 16)
● If ADIRECT RECB is set to AOFFB, the R button functions as
described in ABasic RecordingB (A pg. 34, 37).
● During Direct Rec, A– –B appears on the front display panel.
● If a programme is recorded with the Direct Rec, the station name
will not be registered in the library. A– – – –B will be displayed for
the station name.
8 SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to AEdit Library
InformationB (A pg. 62).
8 CONTINUOUS PLAY ^ OFF / ON
When this function is set to AONB, multiple titles on a disc are
played back continuously one after another.
● Even if there is no power supply for more than 60 minutes, the
unit keeps the setting.
8 VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /
PRIORITIZE 16:9
This is the setting for the aspect ratio used when you dub titles to
DVD discs in video mode. If the titles you want to dub are recorded
in both 16:9 and 4:3, you must select one aspect ratio.
8 INPUT COLOUR SYSTEM ^ PAL / SECAM
You can play back PAL discs, or record PAL and SECAM signals
on this unit. Select the appropriate colour system.
PRIORITIZE 4:3:
PAL:
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is
To record PAL signals.
dubbed in 4:3.
SECAM:
PRIORITIZE 16:9:
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is
dubbed in 16:9.
8 JUMP TIME ^ 15 MIN / 30 MIN / 1 HR
You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to AJump SearchB (A pg. 26,
40).
8 VIDEO MODE RECORDING AUDIO ^ MAIN / SUB
This is the setting for the audio channel to be selected when
dubbing titles to DVD discs in video mode. Select either one of the
two settings if the titles to be dubbed have two audio channels.
MAIN:
Select this to dub the main channel.
SUB:
Select this to dub the sub channel.
8 MP3 & WMA / JPEG ^ MP3 & WMA / JPEG
You can select files to play back, when both MP3&WMA files and
JPEG files are recorded on a disc.
MP3 & WMA:
Select this to play back MP3/WMA files.
JPEG:
Select this to play back JPEG files.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
80
DISPLAY SET
8 SUPERIMPOSE ^ OFF / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
OFF:
To turn off superimposed indications.
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
● Even when ASUPERIMPOSEB is set to AOFFB, you can display
the various operational indicators by pressing ON SCREEN. To
clear the operational indicators, press ON SCREEN again.
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 71)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8 BLUE BACK ^ OFF / ON
When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to AOFFB.
8 DIMMER ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT:
Normally select this.
DIMMED:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8 POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode ^
^ the front display panel will be turned off.
● Power Save does not work when ^
^ the unit’s power is turned off after timer-recording or Instant
Timer Recording.
^ the Automatic Satellite Programme Recording mode is
engaged. (A pg. 53)
^ AL-2 SELECTB is set to ADECODERB, ASAT VIDEOB or ASAT
S-VIDEOB. (A pg. 72)
● It takes some time for the unit to complete initialisation after you
display panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 10
different languages. Though Auto Set Up selects the language
automatically (A pg. 19), you can change the language setting
manually as required.
For details, refer to AOn-screen Language SetB (A pg. 20)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
81
* The boldface settings below indicate the settings at your purchase.
Mode Set
8 B.E.S.T. ^ ON / OFF
You can set the B.E.S.T. (Biconditional Equalised Signal Tracking)
(VHS Deck Only)
system to AONB or AOFFB. (A pg. 45)
NOTES:
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● When watching a tape recorded with AB.E.S.T.B set to AONB, it is
recommended that you leave B.E.S.T. on during playback as
well.
● When watching a rental tape or one recorded on another video
recorder, or when using this unit as the player for editing, set
B.E.S.T. to your preference.
CABLE/SAT
TV
DVD
● The B.E.S.T. system works for both SP and LP modes only after
a tape has been inserted and the Record mode is first initiated. It
does not work during recording.
VHS
● The B.E.S.T. system does not work while Automatic Satellite
Programme Recording is in progress. (A pg. 45)
recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled. The
next time the cassette is used for recording, B.E.S.T. is re-
performed.
● Pressing the unit’s R button while ABESTB is displayed does not
start Instant Timer Recording. (A pg. 45)
rtwe
ENTER
8 PICTURE CONTROL ^ AUTO / EDIT / SOFT
This feature helps you to adjust the playback picture quality
according to your preference. Normally select AAUTOB.
AUTO:
SET UP
Picture quality is adjusted automatically.
EDIT:
Minimises picture degradation during editing (recording and
playback).
SOFT:
Reduces image coarseness when viewing overplayed tapes
containing a lot of noise.
You can change various mode settings on the Function Set
screen.
To change the settings of these modes, find the desired mode in
the menu (for details on each menu, see pages 81 through 82),
then follow the procedure below.
NOTES:
● When you select AEDITB or ASOFTB, the selected mode will not
change until you select another mode.
● When you select AEDITB to dub tapes, be sure to select ANORMB
after you finish dubbing the tapes.
automatically from AAUTOB to ANORMB.
1 Press VHS so that the VHS lamp lights up on the unit.
2 Press SET UP to access the
MODE SET
Function Set screen.
B.E.S.T.
ON
AUTO
PICTURE CONTROL
O.S.D.
AUTO SPNLP TIMER
COLOUR SYSTEM
3 Press F G to select the item you
want to change, then press
ENTER or E to select the desired
mode.
AUTO
8 O.S.D. ^ AUTO / OFF
OFF
PAL/NTSC
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
[JK] N [ENTER]
[SET UP] : EXIT
4 Press SET UP to complete the
NOTES:
setting.
● Even when AO.S.D.B is set to AOFFB, you can display the various
operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
● When you use this unit as the source player for editing, be sure to
set AO.S.D.B to AOFFB before starting.
● During playback, the operation mode indicators may be disturbed
depending on the type of tape being used.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
82
8 AUTO SPNLP TIMER ^ ON / OFF
Tray Lock (DVD Deck Only)
When this function is set to AONB, the unit automatically switches to
LP mode to allow complete recording if there is not enough tape to
record the entire programme while timer-recording in SP mode.
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
For Example:
● Turn off the unit.
Recording a programme of 140 minutes in length onto a 120-
minute tape.
M
o
Approximately 30 minutes
LP mode
Approximately 110 minutes
SP mode
Total 140 minutes
Make sure you set this function to AONB, before the timer-recording
starts.
NOTES:
To lock tray
● If you have programmed the unit to timer-record 2 or more
programmes, the second programme and those thereafter may
not fit on the tape if you set AAUTO SPNLP TIMERB to AONB. In
this case, make sure the mode is not engaged, then set the tape
speed manually during timer programming.
While the unit is turned off, press and hold o, then press M on the
unit. ALOCKB appears on the front display panel and the disc tray is
locked.
To unlock tray
While the unit is turned off, press and hold o, then press M on the
unit. AUNLOCKB appears on the front display panel.
● In order to ensure that the recording fits on the tape, this feature
may leave a slight non-recorded section at the end of the tape.
● There may be some noise and sound disturbance at the point on
the tape where the unit switches from SP to LP mode.
● The Auto SPNLP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work properly
on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and
T(ST)-120.
8 COLOUR SYSTEM ^ PAL/NTSC / MESECAM
You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this unit. Select the appropriate
colour system.
* SECAM signals will be recorded as MESECAM on this unit; MESECAM is
the designation for tapes with SECAM signals that have been recorded on
a MESECAM-compatible PAL video cassette recorder.
PAL/NTSC:
To record PAL signals, or play back a PAL or NTSC tape.
MESECAM:
To record SECAM signals, or play back a MESECAM tape.
NOTES:
● SECAM signals recorded on the HDD or DVD deck are played
back as PAL signals. As such, when dubbing to VHS deck, make
sure to set ACOLOUR SYSTEMB to APAL/NTSCB.
About NTSC Playback
● Some TVs shrink the picture vertically and place black bars at the
top and bottom of the TV screen. This is not a malfunction on the
part of either the unit or the TV.
● The picture may roll up and down. This can be corrected using
the V-HOLD control found on some TVs. (This cannot be
corrected if the TV does not have a V-HOLD control.)
● The counter and tape remaining time readings will be incorrect.
● During search, still, or frame-by-frame playback, the picture will
be distorted, and there may be a loss of colour.
● Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
83
Tuner Set
c System Setup
IMPORTANT:
Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)
or Auto Channel Set (A pg. 83) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
● When timer-programming with the a system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
OR
CABLE/SAT
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
TV
DVD
^ Set the Guide Programme number for that station manually.
● When you wish to timer-record a satellite programme with the
a system,
^ Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
rtwe
Guide Programme Number Set
1 Press SET UP to access the Main Menu screen.
2 Press D E to select AINITIAL SET UPB, then press G.
3 Press D E to select ATUNER
SET UP
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
SETB, then press G.
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
4 Press FGD E to select
AGUIDE PROG SETB, then
press ENTER.
SAT CONTROL SET
GUIDE PROG SET
11
2
13
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SELECT
IMPORTANT:
5 Press F G to select AGUIDE
PROGB, then press ENTER.
11
12
13
Perform the following steps only if ^
INITIAL SET UP > GUIDE PROG SET
^ Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (A pg. 17, 18)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
GUIDE PROG
TV PROG
1
6 Press F G to select the Guide
Programme number for the
desired station as shown in
the TV listings. Then press
ENTER.
YLE2
1
RETURN
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
Auto Channel Set
SELECT
7 Press F G to select ATV
PROGB, then press ENTER.
1 Press SET UP to access the Main Menu screen.
3 Press D E to select ATUNER SETB, then press G.
4 Press FGD E to select AAUTO
● Pressing AUX changes ATV PROGB to ASATB.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
● To timer-record a satellite programme with the a
system, you need to install the provided Satellite Controller and
perform the procedure described in ASatellite Receiver Control
Setting (HDD & DVD Deck Only)B (A pg. 22).
CH SETB, then press ENTER.
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
5 Press FGD E to select your
country’s name, then press
ENTER.
SAT CONTROL SET
GUIDE PROG SET
11
12
13
● Repeat steps 5 – 7 as necessary.
8 Press SET UP to complete the setting.
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
language of your choice.
SELECT
Guide Programme Number
7 Press ENTER twice.
● When you have connected the
via a fully-wired 21-pin SCART
cable (A pg. 16), the unit
automatically performs the
Preset Download and the T-V
LINK screen will appear.
(A pg. 18)
AGuide Programme (GUIDE PROG) numberB refers to the
assigned TV station numbers, according to broadcast area, for
the a timer recording. The Guide Programme Numbers
can be found in most TV listings.
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
SELECT
● The Auto Set screen appears,
and remains on screen while the unit searches for receivable
stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
84
8 View the Confirmation screen.
Manual Channel Set
Store channels that were not stored during Auto Set Up
(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set
(A pg. 83).
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
displayed on the TV screen.
● After selecting AOKB, APLEASE WAIT...B appears on the screen
while channel data is being transferred to the VHS deck. During
operable. It will exit the AUTO SET mode once APLEASE
WAIT...B disappears from the screen.
ATTENTION:
When closing the Confirmation screen, APLEASE WAIT...B
appears on the screen while channel data is being transferred to
the VHS deck. During this period (approximately 80 seconds),
the VHS deck is not operable. It will exit the current mode once
APLEASE WAIT...B disappears from the screen.
9 Press SET UP to complete the setting.
● Using the Confirmation screen, you can skip or add channel
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
1 Press SET UP to access the Main Menu screen.
2 Press D E to select AINITIAL SET UPB, then press G.
3 Press D E to select ATUNER SETB, then press G.
● For information on scrambled broadcasts, refer to AWhen
Receiving A Scrambled Broadcast (HDD & DVD Deck Only)B
(A pg. 85).
4 Press FGD E to select AMANUAL CH SETB, then press
ENTER. The Manual Channel Set screen appears.
IMPORTANT:
5 Press D E to select AEDITB, then press ENTER.
● In certain reception conditions, station names may not be
not work properly. When the Guide Programme numbers are
not set properly, the programme that you do not intended to
be sure to check the desired channel is selected correctly.
(A pg. 49, 54)
6 Press FGD E to select a blank
(Example) To store in position 12.
position in which you want to
INITIAL SET UP > MANUAL CH SET
store a channel, then press
ENTER. The Confirmation
screen appears.
CH
ID
CH
ID
PR
01
PR
07
08
C01
02
----
----
----
02
CTEA
03
04
05
06
05
C79
01
1000
3SAT
9LIV
AB3
09
10
11
12
----
----
----
----
7 Press F G to select ABANDB,
then press ENTER.
04
<
>
● Your unit memorises all receivable stations even if reception of
ChannelB)
MOVE
EDIT
RETURN
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
NOTES:
● Fine tuning is performed automatically during Auto Channel Set.
If you want to perform tuning manually, refer to AFine-Tuning
Channels Already StoredB (A pg. 85).
8 Press F G to change the band
between CH (regular) and CC
(cable), then press ENTER.
INITIAL SET UP > MANUAL CH SET
BAND
CH
CH
2
● If you perform Auto Channel Set when the aerial cable is not
connected properly, ASCAN COMPLETED -NO SIGNAL-B
appears on the TV screen in step 8. In such a case, make sure of
start again.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 85,
AINFORMATIONB).
----
ID
FINE
DECODER
OFF
RETURN
channel number you want to
store.
ENTER
SELECT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
● To enter the registered
station name (A pg. 98), press F G to select AIDB, then press
ENTER. Press F G.
● For fine tuning adjustment, press F G to select AFINEB, then
● When storing a channel that sends scrambled broadcasts,
press F G to select ADECODERB, then press ENTER. Press
F G to set ADECODERB to AONB (AOFFB is the default setting).
● When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB, ASAT
Confirmation screen appears.
12Press SET UP or RETURN to close the Confirmation screen.
● To change positions, see AChange Station Channel PositionB
(A pg. 85).
● If you wish to set station names other than the ones registered
in your unit, see ASet Stations (B)B (A pg. 85).
ATTENTION:
Guide Programme numbers are not set when channels are
stored manually. (A pg. 83, Ac System SetupB)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
85
Delete A Channel
Set Stations (A)
Set station names that are registered in your unit.
1 Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2 Press FGD E to select the channel you want to delete.
2 Press FGD E to select the channel you want to modify, then
3 Press CANCEL(L) to delete a channel. The channel next to
press ENTER. The Confirmation screen appears.
● Repeat steps 2 – 3 as necessary.
3 Press F G to select AIDB, then press ENTER.
4 Press SET UP or RETURN to close the Confirmation screen.
4 Move the arrow to the left ID selection column. Registered
station names (ID) (A pg. 98) appear as you press F G.
Change Station Channel Position
5 Press ENTER to select the desired ID, then press ENTER
again to select AOKB.
1 Perform steps 1 – 4 of AManual Channel SetB (A pg. 84).
2 Press D E to select AMOVEB, then press ENTER.
6 Press RETURN to return to the Manual Channel Set screen.
3 Press FGD E to select the channel you want to move, then
7 Press SET UP or RETURN to close the Confirmation screen.
press ENTER.
4 Press FGD E to select the new channel position, then press
ENTER.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
Set Stations (B)
Set station names other than the ones registered in your unit.
1 Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2 Press FGD E to select the channel you want to modify, then
press ENTER. The Confirmation screen appears.
INITIAL SET UP > MANUAL CH SET
INITIAL SET UP > MANUAL CH SET
CH
ID
CH
PR
01
PR
CH
ID
ID
CH
PR
01
PR
ID
3 Press F G to select AIDB, then press ENTER.
C01
02
----
07
08
09
10
11
12
----
----
----
----
----
----
C01
C79
----
07
08
09
10
11
12
----
----
----
----
----
----
02
CTEA
02
3SAT
03
04
05
06
05
C79
01
1000
3SAT
9LIV
AB3
03
04
05
06
02
05
01
04
CTEA
1000
9LIV
AB3
+, & (space)), then press ENTER.
● Enter the remaining characters the same way (maximum of 4).
04
5 After entering all characters, press FGD E to select AOKB, then
<
>
<
>
MOVE
EDIT
RETURN
RETURN
MOVE
EDIT
press ENTER.
● Repeat steps 3 – 4 as necessary.
6 Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 2 – 5 as necessary.
7 Press SET UP or RETURN to close the Confirmation screen.
When Receiving A Scrambled Broadcast (HDD & DVD
Deck Only)
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +, & (space) (maximum of 4).
1 Set AL-2 SELECTB to ADECODERB. (A pg. 72)
Fine-Tuning Channels Already Stored
2 Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
3 Press FGD E to select the channel position broadcasting
screen appears.
1 Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2 Press FGD E to select the channel you want to fine-tune, then
press ENTER. The Confirmation screen appears.
4 Press F G to select ADECODERB, then press ENTER.
5 Press F G to set ADECODERB to AONB, then press ENTER.
3 Press F G to select AFINEB, then press ENTER.
4 Press F G until the picture appears in its best quality, then
6 Press RETURN to return to the Manual Channel Set screen.
press ENTER.
● Repeat steps 3 – 5 as necessary.
● Repeat steps 2 – 4 as necessary.
7 Press SET UP or RETURN to close the Confirmation screen.
5 Press RETURN to return to the Manual Channel Set screen.
6 Press SET UP or RETURN to close the Confirmation screen.
INFORMATION
If you live in Eastern Europe, ATV SYSTEMB setting appears
select appropriate TV system (D/K or B/G). Normally, TV
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step 5 of AAuto
Channel SetB (A pg. 83).
B Press F G to select ATV SYSTEMB in step 7 of AManual
Channel SetB (A pg. 84).
C Press F G to select appropriate TV System (D/K or B/G).
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
86
6 Press F G to select ATV PROGRAMMEB, then press ENTER.
Press F G to set the channel position to the number
representing the station transmitting clock setting data, then
press ENTER.
● The unit is preset to receive clock setting and adjustment data
from channel position 1.
IMPORTANT:
If you performed Auto Set Up (A pg. 17) or Preset Download
unit’s built-in clock is also set automatically.
Perform the following steps only if ^
NOTES:
● Just Clock (when set to AONB) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
^ Auto Clock Set has not been performed correctly by Auto Set
Up or Preset Download.
OR
^ the unit’s power is on.
^ the unit is in the Timer mode.
clock’s time and the actual time.
^ you want to change Just Clock setting. (See AJust ClockB in
the right column)
^ the unit is in the Automatic Satellite Programme Recording
mode. (A pg. 53) (HDD deck only)
^ the unit is in the Power Save mode. (A pg. 80)
^ AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB.
(A pg. 72)
● If Just Clock is set to AONB, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
● Just Clock may not function properly depending on the reception
condition.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
CABLE/SAT
TV
DVD
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal.
The Just Clock option can be set to AONB or AOFFB at the Clock Set
screen (the default setting is AOFFB).
ENTER
rtwe
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock
may be reduced, which could adversely effect timer recording. We
recommend you to keep Just Clock on. In cases where the clock
setting data from a PDC signal is incorrect, however, you are
advised to keep Just Clock set to AOFFB.
SET UP
1 Press SET UP to access the Main Menu screen.
2 Press D E to select AINITIAL SET UPB, then press G.
3 Press D E to select ACLOCK
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
SETB, then press G.
TUNER SET
CLOCK SET
YEAR
DATE
TIME
2004
NOTE:
01. 01 THU
When you have selected
AMAGYARORSZÁGB, AČESKÁ
REPUBLIKAB, APOLSKAB or
AOTHER EASTERNB for the
country setting (A pg. 17), you
cannot use Just Clock
--:--
OFF
1
JUST CLOCK
TV PROGRAMME
ENTER
SET UP
EXIT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT
function. Skip steps 5 and 6.
4 Press F G to select AYEARB, then press ENTER. Press F G to
set the year, then press ENTER.
● Repeat the same procedure to set the date and time.
● When you set the date, press and hold F G to change the date
by 15 days interval.
● When you set the time, press and hold F G to change the time
by 30 minutes interval.
5 Press F G to select AJUST CLOCKB, then press ENTER. Press
F G to set to the desired mode, then press ENTER.
● The default setting is AOFFB.
● For the Just clock function, refer to AJust ClockB on the right
column.
● If you set to AOFFB, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
87
Format A DVD-RAM Disc
Format A Disc (DVD Deck Only)
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press D E to select AHDD/DVD SET UPB, then press G.
4 Press D E to select ADISC SET
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
UPB, then press G.
HDD SET UP
DVD SET UP
DISC SET UP
FINALISE
Video
CANC. FINALIS.
5 Press FGD E to select
ATTENTION:
AFORMATB, then press
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
ENTER. Press D E to select
AOKB, then press ENTER.
FORMAT
ENTER
SET UP
EXIT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
6 Press D E to select
AEXECUTEB, then press
ENTER.
SELECT
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
Format A DVD-RW Disc
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB as above
before continuing.
CABLE/SAT
2 Press FGD E to select AFORMATB, then press ENTER. Press
D E to choose AVR MODEB or AVIDEO MODEB, then press
ENTER when ADISC WILL BE FORMATTEDB appears on the
TV screen.
TV
DVD
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
ENTER
rtwe
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 59)
SET UP
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
88
Finalise A DVD-R/RW Disc
Finalise A Disc (DVD Deck Only)
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 87)
before continuing.
2 Press FGD E to select AFINALISEB, then press ENTER.
● For DVD-R/RW (Video mode) discs, the background selection
screen will appear. Press FGD E to select the desired
background from a selection of 18 backgrounds.
Finalising DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalised in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Title names input in the Library Database Navigation are
registered as title names in the DVD menu. (A pg. 58)
3 Press D E to select AOKB, then press ENTER.
4 Press D E to select AOKB, then press ENTER.
5 Press SET UP to return to the normal screen.
● Menu screen is cleared.
● Turn on the unit.
● Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for
library appears.
played on DVD players compatible with VR mode.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-R/RW disc to finalise.
CABLE/SAT
Cancel The Finalisation Of A DVD-RW Disc
TV
DVD
1 Load a DVD-RW disc to cancel the disc finalisation, and
perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 87)
before continuing.
2 Press FGD E to select ACANC. FINALIS.B, then press ENTER.
3 Press D E to select AEXECUTEB, then press ENTER.
4 Press SET UP to return to the normal screen.
● When the disc finalisation is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(A pg. 7, 87)
ENTER
rtwe
SET UP
Before finalising
● It is possible to record on a blank space.
● It is possible to enter title names. (A pg. 58)
● It is possible to delete titles. (A pg. 59)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
title is deleted from a DVD-R disc.
● It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalised.
After finalising (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back
the discs as DVD VIDEO discs.
● Although DVD-R/RW discs finalised on this unit become playable
on DVD players compatible with DVD-R/RW discs, some discs
still may not play, for which JVC cannot take responsibility.
● Marked points marked before finalising will be deleted, and titles
will be divided automatically into AchaptersB approximately every
5 minutes. (A pg. 27)
● Depending on the DVD players and DVD-R/RW discs used, and
on the conditions of recording, it may not be possible to play back
the discs. In this case, play back the discs on this unit.
● Additional recordings become impossible.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
Scan Mode Set
2 Press PROGRESSIVE SCAN for 3 or more seconds.
Progressive scan mode has been established. (A pg. 12)
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
If you connect the unit and TV with Component Video Connection
(A pg. 16), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.
NOTES:
8 Interlaced scan
● When the progressive mode is set, be sure to set AL-1 OUTPUTB
to ACOMPONENTB (A pg. 72). Progressive scan is output only
from [COMPONENT VIDEO OUT] connector.
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video
material.
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8 Progressive scan
● Scan mode cannot be set while menu screen is displayed.
● When the Progressive scan mode is engaged, no video signal is
output from [L-1 IN/OUT] connector.
Progressive scan displays all the horizontal lines of a picture at
one time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
Watch the images on VHS deck in the Progressive
scan mode via component video
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
the unit.
2 Set AL-1 OUTPUTB to ACOMPONENTB (A pg. 72), and the
Progressive-compatible TV to its component input mode.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
3 Press PROGRESSIVE SCAN for 3 or more seconds.
● The video output indicator q lights up on the front display
panel.
CABLE/SAT
4 Press VHS so that the VHS lamp lights up on the unit, then
TV
DVD
press PROGRESSIVE SCAN.
● ACOMP OFFB is displayed on the front display panel. It will be
displayed for 5 seconds.
HDD
VHS
DVD
5 Press PROGRESSIVE SCAN again within 5 seconds.
● ACOMP ONB is displayed on the front display panel and q
lights up on the front display panel.
● The VHS progressive scan image will then be outputted from
the [COMPONENT VIDEO OUT (Y/PB/PR)] connectors.
NOTES:
● Be sure to engage the HDD or DVD deck in stop mode.
● It is possible to watch in interlace mode through the component
video connection (AL-1 OUTPUTB set to ACOMPONENTB)
simply by pressing PROGRESSIVE SCAN to switch to ACOMP
ONB. However, q will not light up on the front display panel as
the image outputted is not in progressive mode.
PROGRESSIVE SCAN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
90
Before requesting service for a problem, use this chart and see if
you can solve the trouble yourself. Small problems are often easily
solved, and this can save you the trouble of sending your unit off
for repair.
Playback (DVD Deck)
The DVD deck cannot be operated.
●
The DVD deck is not selected.
N Press VHS/HDD/DVD SELECT on the unit repeatedly or DVD
Initialising (DVD Deck Only)
on the remote so that the DVD lamp lights up on the unit.
Malfunction occurs on the unit.
Images do not appear on the TV screen.
N Press A to turn off the unit, press and hold A, then press o
●
The TV receiver’s channel selector is not set to the AV mode.
for two seconds or more.
N Set the TV to its AV mode.
●
When interlace scanned programme is played back,
progressive scan mode is selected.
General
No power is supplied to the unit.
N Press and hold PROGRESSIVE SCAN until q disappears
from the front display panel. (A pg. 89)
●
The AC power plug is disconnected from the mains outlet.
N Connect the AC power plug to the mains outlet securely.
Playback does not start or stop immediately after playback is
started by pressing I.
(A pg. 16)
The remote control does not work properly.
●
The disc is loaded upside down.
N Remove the batteries, wait for 5 minutes or more, then load the
N Place the disc on the disc tray with the playback surface facing
butteries again.
down. (A pg. 8)
●
The setting of the remote control code is inappropriate.
●
A disc not being compatible with the unit is loaded.
N Load a playable disc on the unit. (A pg. 5)
A dirty disc is loaded.
N Clean the disc. (A pg. 9)
Defective disc is loaded.
N Set the same remote control code (1, 2, 3, or 4) on both the unit
and the remote control. (A pg. 74)
●
●
The batteries are discharged.
N Replace the dead batteries with new ones.
●
N Replace the warped or scratched disc with a normal one.
Dubbing from the external equipment is not possible.
Images are blurred or distorted when you start High-Speed
Search.
●
The source (another video recorder, camcorder) has not been
properly connected.
All necessary power switches have not been turned on.
N Confirm that all units’ power switches are turned on.
The setting of the input channel position is inappropriate.
N Images are blurred or distorted at the point where the playback
●
speed changes and this is not a malfunction of the unit.
Playback does not start.
●
N Select the input channel position (AF-1B, AL-1B or AL-2B) that
corresponds to the input terminal connected to the external
equipment. (A pg. 71)
N Playback does not start for approximately 30 seconds after
Playback does not start when you select a title or a chapter.
The on-screen display superimposed on the programme
played back/received on this unit is recorded when you dub
the programme to an external recording equipment.
●
The Parental Lock is engaged and the disc is rated higher than
the set level.
N Release the Parental Lock temporarily or change the set level.
N Set ASUPERIMPOSEB or AO.S.D.B to AOFFB. (A pg. 80, 81)
(A pg. 33)
The unit does not operate.
Playback (HDD Deck)
The HDD deck cannot be operated.
●
●
There are cases when the operation is prohibited on the disc.
Lightning or static electricity may cause malfunction of the unit.
N Press A to turn the power off, then press the button again to
●
The HDD deck is not selected.
turn the power on.
N Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
on the remote so that the HDD lamp lights up on the unit.
The remote control of a JVC TV will not operate the unit.
●
The setting of the remote control code is inappropriate.
N To operate the unit using a JVC TV remote control, set the
remote control code of the unit to A1B (Default: A3B). (A pg. 74)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
91
Playback (VHS Deck)
Recording (HDD Deck)
The VHS deck cannot be operated.
TV broadcasts cannot be recorded.
●
The VHS deck is not selected.
●
AL-1B, AL-2B or AF-1B has been selected as the input mode.
N Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
N Set to the desired channel.
on the remote so that the VHS lamp lights up on the unit.
Camcorder recording is not possible.
The tape will not rewind or fast-forward.
●
The camcorder has not been properly connected.
N Confirm that the camcorder is properly connected.
The input mode is not correct.
●
The tape is already fully rewound or fast-forwarded.
N Check the cassette.
●
N Set the input mode to AF-1B. (A pg. 70)
The playback picture does not appear while the tape is
running.
Recording (VHS Deck)
●
The TV is not set to the AV mode.
During recording, the tape does not run. The VHS recording
lamp lights up on the unit.
N Set the TV to the AV mode.
Noise appears during visual search.
●
The unit is in the Record Pause mode.
●
This is normal.
N Press I to resume recording.
Noise appears during normal playback.
Recording cannot be done.
●
The automatic tracking mode is engaged.
●
There is no cassette loaded, or the cassette loaded has had its
record safety tab removed.
N Try manual tracking. (A pg. 43)
N Insert a cassette, or using adhesive tape, cover the hole where
The playback picture is blurred or interrupted while TV
broadcasts are clear or AUSE CLEANING CASSETTEB
message appears on the screen.
the tab was removed.
TV broadcasts cannot be recorded.
●
AL-1B, AL-2B or AF-1B has been selected as the input mode.
●
The video heads may be dirty.
N Set to the desired channel.
N Use a dry cleaning cassette TCL-2, or consult your JVC dealer.
Camcorder recording is not possible.
Breaks are noticeable in Hi-Fi soundtrack.
●
The camcorder has not been properly connected.
N Confirm that the camcorder is properly connected.
The input mode is not correct.
●
The automatic tracking mode is engaged.
N Try manual tracking. (A pg. 43)
●
N Set the input mode to AF-1B.
The tape is automatically rewound, then the unit is shut off.
The desired programme cannot be recorded.
●
The end of the tape was reached during recording.
●
The channel position does not correspond to that in the
receiving area.
N The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
N Set the correct channel position for the receiving broadcast.
(A pg. 83)
Recording cannot be made.
Timer Recording (HDD & DVD Deck)
●
No disc or a disc not being compatible with the unit is loaded.
N Load a recordable disc on the unit. (A pg. 5)
The disc loaded is not formatted.
N Format the disc. (A pg. 87)
Timer programming cannot be made.
●
●
Date and time is not correct.
N Set date and time correctly. (A pg. 86)
Timer recording is in progress.
●
●
N Recording cannot be made on finalised discs. Load a
N Timer programming can’t be performed while a timer recording
recordable disc on the unit.
is in progress. Wait until it finishes.
●
recorded.
Timer programming recording does not start.
N Clear unnecessary titles on the disc or load a blank disc.
●
Date and time is not correct.
(A pg. 59)
N Set date and time correctly. (A pg. 86)
●
The DVD-RAM disc loaded has had its protect tab slid to the
protect position.
a Timer Programming cannot be made.
N Release the protect tab. (A pg. 8)
●
Date and time set on the unit is not correct.
N Set date and time correctly. (A pg. 86)
●
The channel position does not correspond to that in the
receiving area.
N Set the correct channel position for the receiving broadcast.
(A pg. 83)
The a system does not timer-record properly.
●
The unit’s channel positions have been set incorrectly.
N Refer to Ac System SetupB (A pg. 83) and reperform the
procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
92
Other Problems
Automatic Satellite Programme Recording does not start.
●
N Connect the satellite receiver to the [L-2 IN/DECODER]
connector properly. (A pg. 53)
The image of the TV broadcast appears distorted on the TV
screen.
For basic connection
N Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights off on the front display panel.
On the front display panel, A– –:– –B appears.
●
Power failure occurred.
For component video connection
N Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights up on the front display panel.
APROGRAMME FULLB appears on the TV screen during timer
programming.
●
32 programmes have already been timer programmed.
Whistling or howling is heard from the TV during camcorder
recording.
N Clear unnecessary programmes on the unit, then try timer
programming again. (A pg. 52)
●
The camcorder’s microphone is too close to the TV.
The TV’s volume is too high.
The disc space does not increase when recorded titles are
cleared.
●
N Turn the TV’s volume down.
●
The PC’s data recorded on a DVD-RAM drive cannot be
cleared on this unit.
When scanning channels, some of them are skipped over.
N Format the disc. (When the disc is soiled, wipe the disc with a
●
Those channels have been designated to be skipped.
N If you need the skipped channels, restore them. (A pg. 84)
Timer Recording (VHS Deck)
The channel cannot be changed.
Timer programming cannot be made.
●
Recording or RetroActive recording* is in progress.
N Press W to pause recording, change the channel, then press I
●
Date and time is not correct.
N Set date and time correctly. (A pg. 86)
The timer is not engaged.
to resume recording.
* HDD deck only
●
N Press VHSj and confirm that the VHS timer indicator lights up
Channel settings that were made manually seem to have
changed or disappeared.
on the front display panel.
●
Timer recording is in progress.
●
After the manual settings were made, Auto Channel Set was
performed.
N Timer programming can’t be performed while a timer recording
is in progress. Wait until it finishes.
N Perform AClock SetB (A pg. 86).
Timer programming recording does not start.
Malfunction occurs and the unit cannot be power off.
●
Date and time is not correct.
N Set date and time correctly. (A pg. 86)
The timer is not engaged.
N Reset the unit by disconnecting the AC power plug from the AC
outlet and connect again.
●
N Press VHSj and confirm that the VHS timer indicator lights up
on the front display panel.
The VHS recording lamp on the unit won’t stop blinking.
●
The timer is engaged but there’s no cassette loaded.
N Load a cassette with the record safety tab intact.
●
N Remove the cassette and cover the hole with adhesive tape, or
insert a cassette with the record safety tab intact.
a Timer Programming cannot be made.
●
Date and time set on the unit is not correct.
N Set date and time correctly. (A pg. 86)
●
The channel position does not correspond to that in the
receiving area.
N Set the correct channel position for the receiving broadcast.
(A pg. 83)
The a system does not timer-record properly.
●
The unit’s channel positions have been set incorrectly.
N Refer to Ac System SetupB (A pg. 83) and re-perform the
procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
93
CAN NOT FINALISE THIS DISC
damaged. Take out the disc, clean it and retry. (A pg. 9, 88)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
CAN NOT CANCEL FINALISATION OF THIS DISC
● A disc that is not registered in the library has been inserted.
Register the disc as necessary. (A pg. 62)
● Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (A pg. 9,
88)
INSERT DISC XXXX
● Appears when a title that has been selected in the library is not
contained in the loaded disc.
PRESS [STOP] AGAIN TO STOP RECORDING
● During Live Memory playback, o has been pressed. (A pg. 46)
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
TIMER RECORDING COMPLETED
● The number of titles exceeds 99.
● The number of play lists exceeds 999.
● Timer recording has finished during Live Memory playback.
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
SET CLOCK BEFORE TIMER PROGRAMMING
● Timer recording finished during Live Memory playback, then the
● To set the timer programme, the clock must be set in advance.
(A pg. 86)
next timer recording is about to begin while playback continues.
COPY PROHIBITED
CAN NOT RECORD
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMMES
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
programmes. To programme more, you need to cancel a timer
programme already set. (A pg. 52)
COPY PROHIBITED
CAN NOT PLAY
DISC NOT LOADED
loaded upside down. (A pg. 8)
● The unit has detected invalid contents at the start or in the middle
of playback.
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY
AND POWERED ON
● When a playback-only disc or a finalised disc is loaded, R has
been pressed. (A pg. 5)
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
● An invalid a number has been input. (A pg. 49)
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
● To set the timer programme using the a system, the
Guide Programme Number must be set in advance. (A pg. 83)
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
recording or instant timer recording.
REGION CODE ERROR
CHECK DISC
number of the disc does not match that of the unit. (A pg. 6)
UNREADABLE DISC
CHECK DISC
(A pg. 6)
COULD NOT FORMAT THE DISC
CHECK THE DISC
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 9, 87)
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
94
GENERAL
VIDEO/AUDIO (VHS Deck)
Power requirement
Signal system
AC 220 V - 240 VH, 50 Hz/60 Hz
PAL colour signal and CCIR monochrome signal, 625 lines/50
fields
Power consumption
Power on: 47 W
Power off: 16.6 W
Recording system
DA4 (Double Azimuth) head helical scan system
Temperature
Operating: 5°C to 35°C
Storage: –20°C to 60°C
Format
VHS PAL standard
Maximum recording time
(SP): 240 min. with E-240 video cassette
(LP): 480 min. with E-240 video cassette
Operating position
Horizontal only
Dimensions (WxHxD)
435 mm x 96 mm x 383 mm
Signal-to-noise ratio
45 dB
Weight
7.2 kg
Horizontal resolution
230 lines
Input/Output
Video input: 0.5 – 2.0 Vp-p, 75 K (pin jack)
Audio input:
Frequency range
(Normal audio): 70 Hz to 10,000 Hz
(Hi-Fi audio): 20 Hz to 20,000 Hz
–8 dB, 50 kK (pin jack)
Corresponding to mono (left)
Audio output: –8 dB, 1 kK (pin jack)
21-pin SCART connectors:
IN/OUT x 1, IN/DECODER x 1
Specifications shown are for SP mode unless otherwise specified.
TUNER/TIMER
Input/Output (HDD & DVD Deck Only)
S-video input:
Y: 0.8 – 1.2 Vp-p, 75 K
C: 0.2 – 0.4 Vp-p, 75 K
i.Link: 4-pin for DV input
Component video output:
Y: 1.0 Vp-p, 75 K
CB/CR, PB/PR: 0.7 Vp-p, 75 K
Corresponding to copy protection
SAT Control: R3.5 mm
Tuning system
Frequency synthesised tuner
Channel coverage
VHF: 47 MHz – 89 MHz/
104 MHz – 300 MHz/
302 MHz – 470 MHz
UHF: 470 MHz – 862 MHz
Memory backup time
Approx. 60 minutes
Digital audio output:
ACCESSORIES
Optical: –18 dBm, 660 nm
Coaxial: 0.7 Vp-p, 75 K
Corresponding to Dolby Digital and DTS Digital Surround
Bit stream
Provided accessories
RF cable,
21-pin SCART cable,
Satellite Controller,
Infrared remote control unit,
AR6B battery x 2
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording time
Maximum 8 hours (with 4.7 GB disc)
(XP): Approx. 1 hour
E.& O.E. Design and specifications subject to change without
notice.
(SP): Approx. 2 hours
(LP): Approx. 4 hours
(EP): Approx. 6 hours
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch
the unit off and unplug the mains power cord. Then plug it in
again and turn the unit on. Take out the disc. After checking the
disc, operate the unit as usual.
(FR): Approx. 1 hour – 8 hours
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system
MPEG2 (CBR/VBR)
VIDEO/AUDIO (HDD Deck)
Video recording compression system
MPEG2 (VBR)
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Recording time
Maximum 300 hours (with 160 GB HDD)
(XP): Approx. 34 hours
(SP): Approx. 69 hours
(LP): Approx. 138 hours
(EP): Approx. 209 hours
(FR): Approx. 36 – 300 hours
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
95
Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
Afar
IK
Inupiak
RN
RO
RU
RW
SA
SD
SG
SH
SI
Kirundi
Abkhazian
Afrikaans
Ameharic
Arabic
IN
Indonesian
Icelandic
Hebrew
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
IS
IW
JI
Yiddish
Assamese
Aymara
Azerbaijani
Bashkir
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Sangho
Serbo-Croatian
Singhalese
Slovak
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Byelorussian
Bulgarian
Bihari
SK
SL
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
Bislama
Bengali, Bangla
Tibetan
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Kirghiz
Breton
Latin
Catalan
Corsican
Czech
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Welsh
LV
Bhutani
Greek
MG
MI
TE
TG
TH
TI
Telugu
Esperanto
Estonian
Basque
Persian
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
TK
TL
FJ
Fiji
FO
FY
GA
GD
GL
GN
GU
HA
HI
Faroese
Frisian
Malay (MAY)
Maltese
TN
TO
TR
TS
TT
Irish
Burmese
Nauru
Turkish
Tsonga
Tatar
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Nepali
Occitan
TW
UK
UR
UZ
VI
Twi
(Afan) Oromo
Oriya
Ukrainian
Urdu
Hindi
Panjabi
Uzbek
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
PL
PS
PT
QU
RM
Polish
Vietnamese
Volapuk
Wolof
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
VO
WO
XH
YO
ZU
Xhosa
IE
Yoruba
Zulu
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
96
Country/Area Code List for Parental Lock
AD
AE
AF
AG
AI
Andorra
CK
Cook Islands
Chile
GN
GP
GQ
GR
GS
Guinea
United Arab Emirates
Afghanistan
CL
Guadeloupe
Equatorial Guinea
Greece
CM
CN
CO
Cameroon
China
Antigua and Barbuda
Anguilla
Colombia
South Georgia and the South
Sandwich Islands
AL
Albania
CR
CU
CV
CX
CY
CZ
Costa Rica
Cuba
GT
GU
GW
GY
HK
HM
Guatemala
Guam
AM
AN
AO
AQ
AR
Armenia
Netherlands Antilles
Angola
Cape Verde
Christmas Island
Cyprus
Guinea-Bissau
Guyana
Antarctica
Argentina
Hong Kong
Czech Republic
Heard Island and McDonald
Islands
AS
AT
American Samoa
Austria
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
ET
FI
Germany
Djibouti
HN
HR
HT
HU
ID
Honduras
Croatia
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Australia
Denmark
Dominica
Dominican Republic
Algeria
Haiti
Aruba
Hungary
Azerbaijan
Bosnia and Herzegovina
Barbados
Indonesia
IE
Ireland
Ecuador
IL
Israel
Bangladesh
Belgium
Estonia
IN
India
Egypt
IO
IQ
IR
British Indian Ocean Territory
Burkina Faso
Bulgaria
Western Sahara
Eritrea
Iraq
Iran (Islamic Republic of)
Bahrain
Spain
IS
Iceland
Italy
Burundi
Ethiopia
IT
BJ
Benin
Finland
JM
JO
JP
KE
Jamaica
Jordan
Japan
Kenya
BM
BN
BO
Bermuda
FJ
Fiji
Brunei Darussalam
Bolivia
FK
FM
Falkland Islands (Malvinas)
Micronesia
(Federated States of)
BR
BS
BT
BV
BW
BY
Brazil
FO
FR
FX
GA
GB
GD
Faroe Islands
France
KG
KH
KI
Kyrgyzstan
Cambodia
Bahamas
Bhutan
France, Metropolitan
Gabon
Kiribati
Bouvet Island
Botswana
Belarus
KM
KN
KP
Comoros
United Kingdom
Grenada
Saint Kitts and Nevis
Korea, Democratic People’s
Republic of
BZ
CA
CC
CF
CG
Belize
GE
GF
GH
GI
Georgia
KR
KW
KY
KZ
LA
Korea, Republic of
Kuwait
Canada
French Guiana
Ghana
Cocos (Keeling) Islands
Central African Republic
Congo
Cayman Islands
Kazakhstan
Gibraltar
GL
Greenland
Lao People’s Democratic
Republic
CH
CI
Switzerland
Côte d’Ivoire
GM
Gambia
LB
Lebanon
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
97
LC
LI
Saint Lucia
Liechtenstein
Sri Lanka
NU
NZ
OM
PA
Niue
SZ
TC
TD
TF
TG
TH
TJ
Swaziland
New Zealand
Oman
Turks and Caicos Islands
Chad
LK
LR
LS
Liberia
Panama
French Southern Territories
Togo
Lesotho
PE
PF
PG
PH
PK
PL
Peru
LT
Lithuania
French Polynesia
Papua New Guinea
Philippines
Pakistan
Thailand
LU
LV
Luxembourg
Latvia
Tajikistan
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UM
Tokelau
LY
Libyan Arab Jamahiriya
Morocco
Turkmenistan
Tunisia
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
Poland
Monaco
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
Saint Pierre and Miquelon
Pitcairn
Tonga
Moldova, Republic of
Madagascar
Marshall Islands
Mali
East Timor
Turkey
Puerto Rico
Portugal
Trinidad and Tobago
Tuvalu
Palau
Myanmar
Paraguay
Taiwan
Mongolia
Qatar
Tanzania, United Republic of
Ukraine
Macau
Réunion
Northern Mariana Islands
Martinique
Romania
Uganda
Russian Federation
United States Minor Outlying
Islands
MR
MS
MT
MU
MV
Mauritania
Montserrat
Malta
RW
SA
SB
SC
SD
Rwanda
US
UY
UZ
VA
VC
United States
Saudi Arabia
Solomon Islands
Seychelles
Sudan
Uruguay
Uzbekistan
Mauritius
Maldives
Vatican City State (Holy See)
Saint Vincent and the
Grenadines
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
Malawi
SE
SG
SH
SI
Sweden
VE
VG
VI
Venezuela
Mexico
Singapore
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Malaysia
Mozambique
Namibia
Saint Helena
Slovenia
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
SJ
Svalbard and Jan Mayen
Slovakia
Vanuatu
New Caledonia
Niger
SK
SL
SM
SN
SO
SR
ST
SV
SY
Wallis and Futuna Islands
Samoa
Sierra Leone
San Marino
Norfolk Island
Nigeria
Yemen
Senegal
Mayotte
Nicaragua
Netherlands
Norway
Somalia
Yugoslavia
South Africa
Zambia
NL
Suriname
NO
NP
NR
Sao Tome and Principe
El Salvador
Nepal
Zaire
Nauru
Syrian Arab Republic
Zimbabwe
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
98
TV Station And ID List
The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and
is displayed on the TV screen when the unit is tuned to a different station.
ID
1000
3SAT
9LIV
STATION NAME
ID
STATION NAME
ID
SHOW
SIC
SKY
STATION NAME
TV1000
3SAT
9LIVE
AB3
JIM TV
JSTV
KA2
JIM
JSTV
KA2
KAB1
KAN2
KAN5
KBH
KIKA
LA7
SHOW
SOCIEDADE
SKY CHANNEL
SKY NEWS
SPEKTRUM
SPORT
SUPER RTL
STAR-TV
SVT1
SVT2
NEWS
SUEDWEST3
TCC
TCM
TELE
TELE5
TF1
TV DE MADRID
TELEMONTECARLO
TMF
TNT INT
TRT INT
TSI
TSI2
TSR
TSR2
BRTN TV1
TV2
TV2 ZULU
TV3
TV3 PLUS
TV4
TV5
TV6
TV8
TVE1
TVE2
TV GALICIA
TV INDEPENDENT
TV NORGE
TVN24
TVP1
TVP2
TV POLONIA
V8
VIDEO
VH-1
VITAYA
VIVA
VIVA2
VIDEO MUSIC
VOX
VIASAT3
VT4
VTM
West3
WORLD
YLE1
YLE2
YORIN
ZDF
AB3
KABEL1
KANAL2
KANAL5
KBH.KANAL
KINDER.KANAL
LA7
LIBERTY TV
LOCAL
M6
MBR
MCM
MDR
MOVIE
MTV
MTV1
MTV2
MTV3
NATIONAL.G
NEWS24
NORD3
N-TV
NBC SUPER
NDR
SKYN
SPEK
SPRT
SRTL
STAR
SVT1
SVT2
SV24
SWR
TCC
TCM
TELE
TELE5
TF1
ADLT
ANIM
ANT3
ARD
ARTE
ATV
ADULT
ANIMAL PLANET
ANTENA3
ARD
ARTE
MAGYAR ATV
BERLIN 1
BBC GROUP
BBC1
LIB
LOCA
M6
B1
BBC
BBC1
BBC2
BBCW
BIO+
BLOO
BR3
C+
C1
C9
MBC
MCM
MDR
MOVE
MTV
MTV1
MTV2
MTV3
NGEO
N24
BBC2
BBC WORLD
TV BIO+
BLOOMBERG
BAYERN3
CANAL PLUS
PORTUGUSES
VALENCIA
CANALE5
KETNET CANVAS
KANAAL Z
CHANNEL4
CHANNEL5
CHILD
CINEMA
TELECLUB
CMT
CNN
ANDALUCIA
CT 1
TM
TMC
TMF
TNT
CAN5
CANV
CANZ
CH4
TRT
N3
N-TV
NBC
TSI1
TSI2
TSR1
TSR2
TV1
TV2
TV2Z
TV3
TV3+
TV4
TV5
TV6
TV8
CH5
NDR
CHLD
CINE
CLUB
CMT
CNN
CSUR
CT1
CT2
DISC
DK1
NED1
NED2
NED3
NETWORK5
NED1
NED2
NED3
NET5
NEWS
NICK
NOVA
NRK1
NRK2
ODE
ORF1
ORF2
PHOE
POLS
PREM
PRIM
PRO7
RAI1
RAI2
RAI3
RET4
RTB1
RTB2
RTL
RTL2
RTL4
RTL5
RTL7
RTLK
RTP
RTV4
SAT1
SBS6
SERV
SF1
NICKELODEON
NOVA
NRK
NRK2
ODEON
ORF1
CT 2
DISCOVERY
DENMARK1
DENMARK2
DENMARK4
DR TV
DR2
DSF
DUNA TV
ETB1
ETB2
TVE1
TVE2
TVG
TVI
DK2
DK4
DR1
DR2
ORF2
PHOENIX
POL SAT
PREMIERE
PRIMA TV
PRO7
RAI1
RAI2
RAI3
RETE4
TELE21
RTBF1 / 2
RTL
RTL2
RTL4
RTL5
RTL7
RTLK
RTP
TVN
DSF
TV24
TVP1
TVP2
TV P
V8
VCR
VH-1
VIT
VIVA
VIV2
VMTV
VOX
VSAT
VT4
VTM
WDR3
WRLD
YLE1
YLE2
YORN
ZDF
DUNA
ETB1
ETB2
ETV
EUNW
EURO
EUSP
FEMM
FILM
FNET
FR2
ETV
EURO NEWS
EURONEWS
EUROSPORTS
FEMMAN
FILM
FILMNET
France2
France3
France5
GALAVISION
HBO
HESSEN3
H.S.EURO
INFO-KANAL
ITALIA1
FR3
FR5
GALA
HBO
HR3
HSEU
INFO
ITA1
ITA7
ITV1
RTV4
SAT1
SBS
Service
SF1
ITALIA7
ITV
SF2
SF2
ZTV
ZTV
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF TERMS
EN
99
A
P
A-B Repeat Playback ................................................ 30
Accidental erasure prevention .................................... 45
Adjusting The Picture Quality ..................................... 31
Angle Selection ........................................................ 27
Audio Channel Selection ........................................... 28
Audio Language/Sound Selection ............................... 28
Auto Channel Set ..................................................... 83
Pan&Scan ................................................................ 21
Play List ................................................................... 60
Programme Playback ................................................ 32
Progressive scan ...................................................... 89
Receiving Stereo And Bilingual Programmes ....36, 38, 45
Recordable/Playable Discs .......................................... 5
Recording Medium And Format .................................... 7
Resume Function ..................................................... 26
Resuming Playback .................................................. 48
B
B.E.S.T. Picture System ............................................ 45
C
Cancel And Change Programmes .........................52, 56
Check Programmes .............................................52, 56
Country/Area Code List for Parental Lock .................... 96
D
Disc menu ............................................................... 25
Discs For Playback Only ............................................. 6
DVD menu ............................................................... 25
S
Selection Of The Audio Channel To Be Recorded
Simultaneous Recording and Playback ....................... 48
Still Picture/Frame-By-Frame Playback ............26, 39, 42
Subtitle Selection ...................................................... 28
E
Elapsed Recording Time Indication ................. 35, 38, 44
F
File Structure Of Discs ................................................ 7
Free Rate Function ................................................... 36
G
Guide Programme Number ........................................ 83
I
Index Search ............................................................ 42
Instant Timer Recording (ITR) ......................... 35, 38, 45
Interlaced scan ......................................................... 89
T
Tape Position Indicator .............................................. 15
Tape Remaining Time ............................................... 45
TV Station And ID List ............................................... 98
J
Jump Search .......................................................26, 40
Just Clock ................................................................ 86
L
U
Language Code List .................................................. 95
Letter Box ................................................................ 21
Live Memory ............................................................ 46
V
M
Variable Speed Search ...................................25, 39, 42
VPS/PDC Recording ........................................... 50, 55
Manual Channel Set ................................................. 84
Manual Tracking ....................................................... 43
Marking Positions To Play Back Again Later ................ 27
N
Next Function Memory .............................................. 43
O
One Touch Replay ................................... 28, 40, 42, 48
On-screen Bar .......................................................... 29
On-screen Language Set .......................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in Germany
1204MNH-SW-VE
EU
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2004 Victor Company of Japan, Limited
|
Indesit Washer IWSC 51051 User Manual
Intel Security Camera 05 2065 002 User Manual
Invacare Mobility Aid Electric wheelchair User Manual
iRobot Vacuum Cleaner Cleaning System User Manual
Ironman Fitness Treadmill IRONMAN 120e User Manual
John Deere Electric Heater AC 100LP User Manual
Johnson Controls Air Conditioner PC090 THRU 240 User Manual
JVC DVD Player XV N310B User Manual
JVC Flat Panel Television PD 50X795 User Manual
Kenwood Stereo Receiver KDC BT755HD User Manual