JVC DVD Player XV NA7SL User Manual

DVD AUDIO/VIDEO PLAYER  
Introduction  
2
XV-NA7SL  
Getting started  
6
Basic operations  
Advanced operations  
MP3 disc playback  
JPEG disc playback  
15  
27  
47  
51  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
P
AGE  
CH  
+
VOL  
-
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
REPEA  
T
SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DVD AUDIO PROGRESSIVE  
DIGEST ANGLE  
3D  
P
AL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
Changing the initial settings 57  
Additional information  
69  
INSTRUCTIONS  
LET0212-004A  
[B]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Repeat playback............................................................... 34  
To repeat the current selection or all tracks  
Introduction  
Page 2  
[Repeat playback] ...............................................................34  
To repeat a desired part [A-B repeat playback]...................35  
Changing the language, sound and scene angle.......... 36  
To select the subtitle language [SUBTITLE] ........................36  
To change the audio language or sound [AUDIO]..............37  
To select a scene angle of DVD VIDEO [ANGLE].................38  
Special picture playback and picture/sound effect...... 39  
To display continuous still pictures [STROBE]....................39  
To zoom in or out pictures [ZOOM] .....................................40  
To adjust the picture character [VFP]...................................40  
To simulate surround sound [3D PHONIC]..........................41  
Checking the sampling frequency and bit rate............. 42  
Menu bar functions ......................................................... 43  
To bring up the menu bar .....................................................43  
Basic operation procedure....................................................43  
Menu bar functions for DVD AUDIO ....................................44  
Menu bar functions for DVD VIDEO .....................................45  
Menu bar functions for SVCD/Video CD/Audio CD .............46  
Supplied accessories..........................................................2  
Notes on handling..............................................................3  
Important cautions...................................................................3  
Safety precautions ...................................................................3  
About discs .........................................................................4  
Playable disc types...................................................................4  
Non-playable discs...................................................................4  
Audio formats...........................................................................4  
Disc structure............................................................................5  
SVCDs and Video CDs with Playback Control function ........5  
Care and handling of discs......................................................5  
Getting started  
Page 6  
Connections ........................................................................6  
Before making any connections .............................................6  
To connect to a TV ...................................................................6  
To connect to a stereo audio amplifier/receiver..................10  
To connect to an amplifier/receiver equipped  
with 5.1-channel inputs ......................................................11  
To connect to a digital audio device.....................................12  
To connect the power cord ...................................................12  
Using the remote control unit.........................................13  
To install batteries in the remote control unit .....................13  
Remote sensor .......................................................................13  
To use the remote control unit for TV operation.................14  
To control the volume of a JVC’s amplifier or receiver......14  
MP3 disc playback  
Page 47  
About MP3 discs.............................................................. 47  
Operations........................................................................ 47  
Basic operations.....................................................................47  
Selecting the desired Group and Track................................48  
Direct selection.......................................................................49  
Repeat playback.....................................................................49  
Checking the sampling frequency and bit rate....................50  
Basic operations  
Page 15  
JPEG disc playback  
Page 51  
Before operation...............................................................15  
Turning on/off the unit...........................................................15  
Initial setup before using the unit.........................................16  
Basic playback ..................................................................18  
Inserting and removing discs................................................18  
To start playback....................................................................19  
To stop playback completely ................................................19  
To stop playback temporarily ...............................................20  
Resuming playback..........................................................20  
To memorize the interrupt position......................................20  
To resume playback...............................................................21  
Variable speed playback..................................................22  
To advance or reverse playback  
About JPEG discs ............................................................ 51  
Basic operations .............................................................. 52  
To see a desired picture ........................................................52  
To zoom in or out the pictures [ZOOM]...............................53  
To see pictures continuously [slide show mode]......... 54  
Playback features...................................................................54  
Selecting the start point of the slide show ..........................54  
Repeat function......................................................................56  
Changing the initial settings  
Page 57  
Selecting preferences...................................................... 57  
About the Preference display................................................57  
How to set preferences..........................................................57  
LANGUAGE menu .................................................................58  
PICTURE menu.......................................................................59  
AUDIO menu ..........................................................................60  
SPK.SETTING menu ..............................................................61  
OTHERS menu .......................................................................62  
Making fine tuning for your speakers............................ 63  
To set the speaker sizes.........................................................63  
To set the delay time .............................................................64  
To set the speaker level.........................................................64  
Limiting playback by children ........................................ 65  
To set Parental Lock for the first time  
rapidly while monitoring....................................................22  
To advance a still picture frame by frame ...........................22  
To playback in slow-motion..................................................23  
To locate the beginning of the scene or song ...............23  
To locate a desired selection using 4 or ¢ ...................23  
To locate a desired selection using the numeric buttons...24  
Other convenient functions.............................................25  
To check the playback status ................................................25  
To move back the playback position during DVD VIDEO  
playback [One touch replay function] ...............................26  
To change the brightness of the display window ...............26  
[PARENTAL LOCK]..............................................................66  
To change the settings [PARENTAL LOCK] .........................67  
To temporarily release the Parental Lock  
Advanced operations  
Page 27  
Playing from a specific position on a disc......................27  
To locate a desired scene from the DVD menu...................27  
To locate a desired scene from the menu of  
[PARENTAL LOCK]..............................................................68  
a SVCD/Video CD with PBC................................................27  
To specify a desired title/group ............................................28  
To locate a desired position in the current title,  
Additional information  
Page 69  
Names of parts and controls .......................................... 69  
Front panel .............................................................................69  
Display window......................................................................69  
Rear panel...............................................................................69  
Remote control unit...............................................................70  
Troubleshooting .............................................................. 71  
Frequently Asked Questions .......................................... 73  
Specifications................................................................... 74  
Appendix A: Country/Area code list  
group or track [Time search]..............................................29  
To locate a specific scene from the display [DIGEST] ........30  
To select a still picture on a DVD AUDIO disc [PAGE] ........31  
To play back a bonus group of a DVD AUDIO disc .............31  
Changing the playback order ..........................................32  
To playback in a specific order [Program play]...................32  
To playback in random order [Random play]......................34  
for Parental Lock........................................................... 75  
Appendix B: Glossary...................................................... 76  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Supplied accessories  
• Audio/video cable (Yellow/White/Red) (× 1)  
• Audio cable (White/Red) (× 2)  
• Remote Control Unit (× 1)  
OPEM/  
CLOSE  
TV
1
TV  
4 T
ST  
TV ANDBY/ON  
TV
TV2  
DV  
7
2
D
10TV-/
T
D
V
D
5
-
ANG  
LE  
T
TV3  
8
TV
3
T
T P  
O
0
M
E
N
PA  
G
E
6
TV
U
VO  
L
CH  
+
9
T
GR  
OUP  
+1M0U
C
H
TV/
CANC
O
ENTER  
I
PREVCIOUS  
E
CH  
M
E
CLE
N
U
VO  
L+  
SL
SELECT  
W
REPEA  
O
N
NEXT S  
C
R
E
E
N
T
DIGEST  
SUB TI
ST
O
PHON3IDC  
ANGLE  
SLO  
A
UDIO  
W+  
P
AL
fs/Ra
NTSC  
VFP  
PR  
ZOOM  
OG  
RES
SCAN  
AMP VCL  
RM-SXV012E  
REMO  
TE CONTR  
OL  
• R6P(SUM-3)/AA(15F) battery (× 2)  
About this instructions manual  
In this instructions manual, we refer the terms in  
brackets [ ] to the display information and OSD (On  
Screen Display) menu. (Example: [AUDIO] means the  
AUDIO preference in the OSD menu.)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on handling  
Important cautions  
Safety precautions  
Installation of the unit  
Avoid moisture, water and dust  
Do not place the unit in moist or dusty places.  
• Select a place which is level, dry and neither too hot  
nor too cold (between 5ºC and 35ºC, 41ºF and 95ºF).  
• Leave sufficient distance between the unit and the TV.  
• Do not use the unit in a place subject to vibrations.  
Avoid high temperatures  
Do not expose the unit to direct sunlight or place it near  
a heating device.  
Power cord  
When you are away  
• Do not handle the power cord with wet hands!  
• A small amount of power (2.4 W) is always consumed  
while the power cord is connected to the wall outlet.  
• When unplugging the unit from the wall outlet, always  
pull the plug, not the power cord.  
When you are away on travel or otherwise for an  
extended period of time, remove the plug from the wall  
outlet.  
Do not insert foreign objects into the unit  
Do not insert wires, hairpins, coins, etc. into the unit.  
To prevent malfunction of the unit  
Do not block the vents  
Blocking the vents may damage the unit.  
• There are no user-serviceable parts inside. If anything  
goes wrong, unplug the power cord and consult your  
dealer.  
Care of the cabinet  
• Do not insert any metallic object into the unit.  
• Do not use any non-standard shape disc available on  
the market, because it may damage the unit.  
• Do not use a disc with tape, seals, or paste on it,  
because damage to the unit may result.  
When cleaning the unit, use a soft cloth and follow the  
relevant instructions on the use of chemically-coated  
cloths. Do not use benzene, thinner or other organic  
solvents and disinfectants. These may cause  
deformation or discoloring.  
Note about copyright laws  
If water gets inside the unit  
• Please check the copyright laws in your country before  
recording from DVD AUDIO, DVD VIDEO, SVCD, Video  
CD, Audio CD, MP3 and JPEG discs. Recording of  
copyrighted material may infringe copyright laws.  
Turn off the power switch and remove the plug from the  
wall outlet, then call the store where you made your  
purchase. Using the unit in this state may cause a fire or  
electrical shock.  
Note about the copyguard system  
• DVD VIDEO discs are protected by the copyguard  
system. When you connect the unit to your VCR (or  
integrated TV/Video system), the copyguard system  
activates and the picture may not play back correctly.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this  
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. "Dolby," "MLP Lossless" and the double-D symbol are  
trademarks of Dolby Laboratories.  
Confidential unpublished works.  
Copyright 1992-1998 Dolby Laboratories. All rights reserved.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762,  
and other world-wide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of  
Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
About discs  
Playable disc types  
Audio formats  
Playable and non-playable disc types are as follows:  
Some audio formats used on discs are described below.  
SVCD  
DVD AUDIO  
DVD VIDEO  
• Linear PCM  
Uncompressed digital audio, the same format used on  
CDs and most studio masters.  
A U D I O  
V I D E O  
DVD AUDIO supports up to six channels at sample  
rates of 48/96/192 kHz (also 44.1/88.2/176.4 kHz) and  
sample sizes of 16/20/24 bits.  
Audio CD  
Video CD  
DVD VIDEO supports two channels at sampling rates  
of 48/96 kHz and quantization of 16/20/24 bits.  
Audio CD/Video CD limited to two channels, 44.1 kHz  
at 16 bits.  
The DVD Logo is a trademark.  
• CD-R and CD-RW discs recorded in the SVCD, Video  
CD, Audio CD, MP3 or JPEG format can be played  
back. However, some discs may not be played back  
because of the disc characteristics or recording  
conditions.  
Note that unfinalized discs cannot be played back.  
• DVD-R discs recorded with the DVD VIDEO format can  
be played back. However, some discs may not be  
played back because of the disc characteristics or  
recording conditions.  
Note that unfinalized disc cannot be played back.  
• DVD VIDEO players and DVD VIDEO discs have their  
own Region Code numbers. This unit can play back  
only DVD VIDEO discs whose Region Code numbers  
include "2."  
• MPEG Multichannel  
A surround audio format which can handle the  
augmentative 7.1-channel format (rare for home use),  
as well as 5.1-channel.  
• Dolby Digital  
A surround audio format configured with six channels.  
Because the "LFE (Low-Frequency Effect for sub-  
woofer, etc.)" channel, one of the six channels, is an  
auxiliary channel, this format is called "5.1-channel  
system."  
Not all Dolby Digital discs contain six (5.1) channel  
information.  
Examples of playable DVD VIDEO discs:  
• DTS (Digital Theater Systems)  
A surround audio format configured with six (5.1)  
channels which is same as Dolby Digital. Because the  
compression ratio is lower than Dolby Digital, it  
provides wider dynamic range and better separation.  
Not all DTS discs contain six (5.1) channels  
information.  
1 2  
3 4  
1 2 3  
4 5 6  
ALL  
2 5  
2
The unit is compatible with the PAL and NTSC systems,  
and can play back discs whose Region Code numbers  
include number "2." You can select "NTSC" or "PAL"  
while using the NTSC/REMOTE/PAL switch on the rear  
panel (for details, see page 6).  
• MLP (Meridian Lossless Packing)  
A format for DVD AUDIO with the compression ratio of  
about 2:1 while allowing the PCM signal to be  
completely recreated by the MLP decoder (required in  
all DVD AUDIO players). It supports up to 192 kHz/24  
bit.  
Non-playable discs  
DVD-ROM, DVD-RAM, DVD-RW, DVD+RW, CD-ROM,  
PHOTO CD, CD-EXTRA, CD-G, CD-TEXT, SACD, MIX-  
MODE CD  
The associated indicator lights up in the display window  
when playing back a disc.  
• Playing back discs listed as "Non-playable discs" above  
may generate noise and damage speakers.  
• This unit can play back audio signals recorded in CD-G,  
CD-EXTRA, CD-TEXT and MIX-MODE CD discs.  
Indicator*  
LPCM  
Audio format  
Linear PCM  
MPEG  
MPEG Multichannel  
Dolby Digital  
DOLBY DIGITAL  
DTS  
DTS (Digital Theater Systems)  
* When playing back a DVD AUDIO disc recorded by  
MLP (Meridian Lossless Packing; a lossless audio  
compression system that can completely recreate the  
PCM signal), no indicator lights up in the display  
window.  
Note that with some formats and/or depending on the  
unit’s [DIGITAL AUDIO OUTPUT] setting, digital audio  
signals may not be always transmitted from the unit’s  
DIGITAL OUT jacks as they are recorded on the disc.  
See [DIGITAL AUDIO OUTPUT] on page 60 for details.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Press  
RETURN.  
Press  
RETURN.  
Press  
RETURN.  
Disc structure  
(For DVD AUDIO)  
Moving  
A DVD AUDIO disc is comprised of "groups," and each  
group is comprised of "tracks." Some DVD AUDIO discs  
also contain a "bonus group" that can be played back by  
entering the "key number" (a kind of password). Usually  
the contents of a "bonus group" are not opened to the  
public. Note that most DVD AUDIO discs include other  
information in addition to audio, such as still pictures,  
movies and text.  
1
picture  
Moving  
picture  
Moving  
picture  
4
Menu  
4
Still  
picture  
screen  
2
1 2  
1 2 3  
Still  
picture  
4
Group 1  
Group 2  
4
Still  
picture  
Track 1  
Track 2 Track 3 Track 4  
Track 2 Track 3  
Track 1  
Care and handling of discs  
(For DVD VIDEO)  
A DVD VIDEO disc is comprised of "titles" and each title  
may be divided into "chapters." For example, if a DVD  
VIDEO disc contains some movies, each movie may have  
its own title number, and each movie may be divided  
into some chapters. In a DVD VIDEO KARAOKE disc,  
each song usually has its own title number and does not  
have chapters.  
How to handle discs  
When handling a disc, do not touch the surface of the  
disc. Since discs are made of plastic, they are easily  
damaged. If a disc gets dirty, dusty, scratched or warped,  
the images and sound will not be picked up correctly,  
and such a disc may cause the player to malfunction.  
Title 1  
Title 2  
Chapter 3  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2  
(For SVCD/Video CD/Audio CD)  
An SVCD, Video CD or Audio CD is simply comprised of  
"tracks."  
Track 1  
Track 2  
Track 3  
Track 4  
Label side  
Do not damage the label side, stick paper to or use any  
adhesive on its surface.  
SVCDs and Video CDs with Playback  
Control function  
Storage  
Make sure that discs are kept in their cases. If discs are  
piled on top of one another without their protective  
cases, they can be damaged. Do not put discs in a  
location where they may be exposed to direct sunlight,  
or in a place where the humidity or temperature is high.  
Avoid leaving discs in your car!  
What is Playback Control (PBC) function?  
The Playback Control function allows you to enjoy menu-  
driven operation and high-resolution still images which  
have a resolution four times greater than moving  
pictures.  
Maintenance of discs  
If there are fingerprints or other dirt adhering to a disc,  
wipe with a soft dry cloth, moving from the center  
outwards.  
If a disc is difficult to clean, wipe with a cloth moistened  
with water. Never use record cleaners, petrol, alcohol or  
any anti-static agents.  
• High-resolution still image display  
You can display high-quality images four times clearer  
than moving pictures.  
• Menu-driven playback  
A selection menu is displayed when you start playing a  
SVCD or Video CD disc with the Playback Control  
feature. The selection menu shows a list of numbers  
for selection. Some discs may show moving pictures  
or a divided screen.  
You can interact with the screen using the menu  
display to select and play an entry.  
See illustration below about basic feature of menu-  
driven playback (See page 27 for more information  
about PBC (Playback Control).).  
CAUTION  
The image may be sometimes poor or noisy due to  
defects in the disc itself.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Connections  
*Before using the unit, you have to connect the unit to a TV and/or amplifier.  
Before making any connections  
• Do not connect the AC power cord until all other connections have been made.  
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a  
VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem  
when connecting the unit to an integrated TV/Video system.  
TV  
The unit  
VCR  
Connect directly  
NOTES  
• In the following description, "TV" may be substituted with "monitor" or "projector."  
• Terminal names used for other components may be different from those used in the following description.  
To connect to a TV  
Connection to a conventional TV  
You can enjoy playback by simply connecting the unit to a TV.  
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.  
In this connection, set the VIDEO  
SIGNAL SELECTOR to "COMP./RGB."  
The unit  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
In this connection, set the NTSC/  
REMOTE/PAL switch set to "PAL."  
RIGHT  
REAR  
FT  
S-VIDEO  
VIDEO SIGNAL SELECTOR  
Audio/Video cable (supplied)  
TV  
Red  
Yellow  
White  
IN  
Yellow  
VIDEO  
LEFT  
AUDIO  
RIGHT  
White  
Red  
NOTE  
• When you connect the unit to a TV with the VIDEO OUT (VIDEO or S-VIDEO) jacks or SCART connector, the unit outputs PAL  
signal only. If you connect the unit to a TV with these ways, make sure that the NTSC/REMOTE/PAL switch set to "PAL."  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Connection to a TV equipped with an S-video jack  
If your TV has an S-VIDEO input, you can get better picture quality by connecting it with the S-VIDEO output of the unit  
using an S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.  
In this connection, set the VIDEO  
SIGNAL SELECTOR to "Y/C."  
The unit  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
RIGHT  
In this connection, set the NTSC/  
REMOTE/PAL switch set to "PAL."  
REAR  
F
S-EO  
VIDEO SIGNAL SELECTOR  
TV  
IN  
S-VIDEO  
Red White  
VIDEO  
S-video cable (not supplied)  
Audio cable (supplied)  
White  
LEFT  
AUDIO  
RIGHT  
Red  
NOTES  
• Connect the unit to a PAL TV or multi-scan TV.  
• Even if cables are connected to both the VIDEO OUT jack and S-VIDEO jack, video signal will only be transmitted from the port  
selected by the settings.  
• You must change the switch position while the unit power is off. Otherwise, the changed setting is not effective.  
To connect to a TV with the SCART connector  
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio  
sound with better quality, connect the AUDIO output to your audio equipment.  
SCART cable  
(Not supplied)  
In this connection, make sure that the NTSC/  
REMOTE/PAL switch set to "PAL."  
TV  
The unit  
IN  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
AV  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
S-VIDEO  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
RIGHT  
VIDEO  
IN  
REAR  
FRONT  
S-VIDEO  
LEFT  
AUDIO  
RIGHT  
NTSC/REMOTE/PAL Switch  
Set the VIDEO SIGNAL SELECTOR correctly according to your TV  
• If the TV only accommodates the composite video signal, set the switch to "COMP./RGB."  
• If the TV accommodates Y/C signals, set the switch to "Y/C" so that you can enjoy better-quality pictures.  
• If the TV accommodates RGB signals, set the switch to "COMP./RGB," and set the unit to supply RGB signals using the  
procedure shown below.  
If you connect the unit to a PAL TV, set the NTSC/REMOTE/PAL switch to "REMOTE" and select PAL system from the  
remote control unit (see page 9).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
How to set the unit to supply RGB signals  
The unit cannot output the RGB signals from the SCART connector and the S-video (Y/C) signals from the S-VIDEO jack  
simultaneously.  
When the unit is turned off  
1 Set the VIDEO SIGNAL SELECTOR to "COMP./RGB."  
Note that you must change the switch position while the unit power is off. Otherwise, the changed setting is not  
effective.  
2 Turn the unit to on.  
The RGB signal outputs from the SCART connector.  
NOTES  
• If you connect to a TV with the VIDEO OUT (VIDEO or S-VIDEO) jack, or the SCART connector, make sure that the NTSC/  
REMOTE/PAL switch set to "PAL."  
• You must change the switch position on the rear panel while unit power is off. Otherwise, the changed setting is not effective.  
Connection to a TV equipped with component jacks  
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO  
IN jacks of your TV with the video cables.  
Blue  
Component video cable (not supplied)  
Green  
Red  
The unit  
In this connection, set the NTSC/  
REMOTE/PAL switch to "NTSC" or  
AUDIO OUT  
DIGITAL OUT  
VEO OU
Blue  
Red  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPNENT  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
"REMOTE."  
NTSC  
PAL  
RIGHT  
Green  
REAR  
FT  
S-VIDEO  
TV  
IN  
Red  
White  
Y
PB  
PR  
S-VIDEO  
VIDEO  
COMPONENT IN  
White  
Red  
Audio cable (supplied)  
LEFT  
AUDIO  
RIGHT  
• Connect "Y" to "Y," "PB" to "PB"(CB), "PR" to "PR"(CR) correctly.  
NOTES  
• You must change the switch position on the rear panel while unit power is off. Otherwise, the changed setting is not effective.  
• In this connection, make sure that the NTSC/REMOTE/PAL switch set to "NTSC" or "REMOTE."  
• When the component video input jacks on the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack  
(optional).  
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH STEREO] (see page 60).  
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio  
output to monaural.  
• To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment (see the following pages).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
To switch the signal format from the remote control unit  
If you set the NTSC/REMOTE/PAL switch on the rear panel to "REMOTE," you can select the component signal format  
from the remote control unit.  
• Before this operation, set the NTSC/REMOTE/PAL switch on the rear panel to "REMOTE," while the unit is turned off.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
PAL/NTSC  
RM-SXV012E  
REMOTE CONTROL  
Press and hold down the PAL/NTSC button  
The signal format switches between the PAL and NTSC.  
To check the current signal format, press PAL/NTSC button while the unit is turned on. The display window on the front  
panel shows the current status ([NTSC] or [PAL]).  
NOTES  
• When switching the signal format from the remote control, make sure that the disc is stopped.  
• You must change the switch position on the rear panel while unit power is off. Otherwise, the changed setting is not effective.  
• If you set the NTSC/REMOTE/PAL switch on the rear panel is set to "REMOTE" or "NTSC," the unit output the signals from the  
COMPONENT VIDEO OUT jacks only.  
• When you set the NTSC/REMOTE/PAL switch on the rear panel is set to "REMOTE," the VIDEO SIGNAL SELECTOR on the rear  
panel is not effective.  
About SCANNING MODE  
To display video on the television (monitor) screen, the conventional scanning method is called "Interlaced scanning."  
With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture  
(frame); i,e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing  
all the even-numbered lines.  
On the other hand, the Progressive scanning is resulting in flicker-free, high-density picture.  
Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video  
source (note that some DVD VIDEO discs contain both film source and video source). Film sources are recorded as 24-  
frame-per-second information, while (NTSC) video sources are recorded as 30-frame-per-second (60-field-per-secon  
interlaced) information.  
When the unit plays back a film source material, uninterlaced progressive output signals are created using the original  
information. When a video source material is played back, the unit interleaves lines between the interlaced lines on  
each to create the interpolated picture and outputs as the progressive signal.  
To make the Progressive scanning mode selection active  
The unit supports the Progressive scanning system as well as the conventional Interlaced scanning system. If your  
television or monitor supports the progressive video input, you can enjoy a high quality picture by making the  
Progressive scanning mode active.  
The Progressive scanning mode selection only works when NTSC/REMOTE/PAL switch on the rear panel is set to "NTSC"  
or "REMOTE." However, note that, when the NTSC/REMOTE/PAL switch on the rear panel is set to "REMOTE" and set  
NTSC system from the remote control unit first.  
• When the unit turned on, and the NTSC/REMOTE/PAL switch on the rear panel is set to "NTSC" or "REMOTE."  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Press and hold down VFP - PROGRESSIVE SCAN for a few seconds  
The scanning mode switches between the Progressive scanning and Interlaced scanning modes.  
• When the scanning mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit.  
Depending on the [STILL MODE] setting on the [PICTURE] preference display and whether the current DVD VIDEO disc is  
film-source or video-source, the color of the indicator differs, as shown in the table below. (see also page 59).  
Source type of DVD VIDEO  
Setting of STILL  
Note  
MODE  
Film source  
Red  
Video source  
Red  
FIELD  
While stopped in the Progressive scanning mode, the  
PROGRESSIVE indicator is lit in red regardless of the [STILL MODE]  
selection.  
FRAME  
AUTO  
Green  
Green  
Green  
Red  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
CH  
+
DVD AUDIO PROGRESSIVE  
VOL-  
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
PROGRESSIVE indicator  
REPEAT SUB TITLE AUDIO  
VFP-  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
PROGRESSIVE  
SCAN  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
NOTES  
• The Progressive scanning mode works only when signal format is NTSC.  
• The Progressive scanning mode works only when you connect to the unit’s COMPONENT VIDEO OUT jacks.  
• When you switch the signal format to PAL from the remote control unit, the Progressive scanning mode is canceled  
automatically.  
• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resulting in the  
unnatural picture when playing back a DVD VIDEO disc in the Progressive scanning mode. In such a case, use the Interlaced  
scanning mode. To check the compatibility of your TV set, contact your local JVC customer service center.  
• All JVC progressive TV and High-Definition TV sets are fully compatible with the unit (Example : AV-61S902).  
To connect to a stereo audio amplifier/receiver  
You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver.  
Connect the unit’s AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio  
amplifier or receiver.  
The unit  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
RIGHT  
REAR  
FRNT  
S-VIDEO  
TV  
Red  
White  
IN  
White  
Red  
Audio cable (supplied)  
LEFT  
AUDIO  
RIGHT  
NOTE  
• When using the unit with a stereo amplifier or receiver, set [ANALOG OUT] in the [AUDIO] preference display to [2-CH STEREO]  
(see page 60).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
To connect to an amplifier/receiver equipped with 5.1-channel inputs  
The unit supports the linear PCM multichannel format of DVD AUDIO and can feed multichannel audio output signals  
from the six analog AUDIO OUT jacks.  
It is also equipped with the DTS and Dolby Digital decoders. So you can enjoy any type of the high quality surround  
sounds by connecting the unit to an amplifier/receiver equipped with the 5.1-channel inputs of an amplifier or receiver  
using the supplied audio cables.  
The unit  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
I
VIDEO  
CEN
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
RIT  
REAR  
FRONT  
S-VIDEO  
Red  
White  
Red  
Amplifier or receiver  
AUDIO IN  
FRONT  
White  
White  
LEFT  
Red White  
Audio/video cable  
(supplied)  
RIGHT  
Yellow  
Red  
White  
Yellow  
REAR  
LEFT  
RIGHT  
Audio cable (supplied)  
Red  
CENTER  
White  
SUBWOOFER  
Red  
Audio cable (supplied)  
• Be sure to connect correctly between corresponding terminals. The order of the 5.1-channel terminals depend on units.  
NOTE  
• When using the 5.1-channel outputs of the unit, set the [ANALOG OUT] in the [AUDIO] preference display to [MULTI  
CHANNEL] (see page 60). If you select [EXPERT] in the [SPK.SETTING] preference display, you can control the audio output  
balance of the speakers (see page 61).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
To connect to a digital audio device  
You can enhance the playback sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of  
an amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc will be  
transferred directly. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder using  
an optional digital cable, you can enjoy high-quality surround sound.  
For a digital connection, connect the unit’s DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of a digital audio  
device using an optical or a coaxial digital cable.  
When using the DIGITAL OUT (OPTICAL) jack, remove the protection cap. Do not lose  
the removed cap.  
When the DIGITAL OUT (OPTICAL) jack is not used, replace the protection cap in the  
jack.  
The unit  
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
AV COMPU LINK  
RIGHT  
EAR  
FRONT  
S-VIDEO  
Coaxial digital cable (not supplied)  
White Red  
Optical digital cable (not supplied)  
Audio cable (supplied)  
Digital equipment  
IN  
IN  
White  
LEFT  
OPTICAL  
AUDIO  
RIGHT  
DIGITAL  
COAXIAL  
Red  
Note that the DIGITAL OUT jacks on the unit have been designed and equipped exclusively for enjoying the digital  
surround sound playback through the unit. It is not recommended to use the jacks for digital dubbing. When recording  
the sounds (DVD AUDIO, DVD VIDEO, SVCD, Video CD or Audio CD) played back on the unit, record them through the  
analog jacks (in this case, set [ANALOG OUT] in the [AUDIO] preference display to [2-CH STEREO]) (see page 60).  
NOTES  
• When you make digital connection, we recommend also to make the analog connection, because, depending on discs, no  
signal may be output from the DIGITAL OUT.  
• When you connect the unit’s DIGITAL OUT to a digital audio device, before using, set [DIGITAL AUDIO OUTPUT] in the [AUDIO]  
preferences correctly according to the connected audio device. If [DIGITAL AUDIO OUTPUT] is not set correctly, loud noise may  
be generated from speakers, causing damage to them. See [DIGITAL AUDIO OUTPUT] on page 60.  
• When you connect the unit’s DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy  
surround sound, the unit’s [D. RANGE COMPRESSION] setting in the [AUDIO] preferences is invalid. Make appropriate  
surround audio settings on the decoder.  
To connect the power cord  
When all the audio/video connections have been made, insert the AC power plug to the wall outlet. Make sure that plugs  
are inserted firmly. The STANDBY/ON  
button lights in red.  
Warning  
• Disconnect the power cord if you are not going to use the unit for a long time.  
• Disconnect the power cord before cleaning the unit.  
• Disconnect the power cord before moving the unit.  
• Do not connect or disconnect the power cord with wet hands.  
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other  
accidents.  
Caution  
• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other  
accidents.  
• If the cord is damaged, consult a dealer and have the power cord replaced with a new one.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Using the remote control unit  
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV and  
amplifier/receiver.  
To install batteries in the remote  
control unit  
Remote sensor  
• Operate the remote control unit while pointing it  
toward the remote sensor on the unit.  
• The remote control unit can be used within a range of  
about 5 meters from the remote sensor. If you operate  
the remote control unit from a diagonal position, range  
may be shorter.  
The battery compartment is located on the back of the  
remote control unit.  
1 Press down on the point shown  
by the arrow at the top of the  
compartment cover, and pull up  
the cover to open the  
Remote sensor  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
compartment.  
DVD AUDIO PROGRESSIVE  
2 Place the two supplied R6P  
(SUM-3)/AA(15F) batteries in  
the remote control unit  
according to the polarity  
markings ("+" and "–") inside the  
compartment and on the  
batteries.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
3 Place the cover over the  
compartment, and press down  
lightly.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
U
M
E
N
U
N
E
CH  
+
M
P
O
T
VOL-  
VOL+  
ENTER  
C
N
H
CH  
-
E
O
E
R
I
C
E
C
S
N
O
PREVIOUS  
CLEAR  
NEXT  
The batteries will last about six months with normal use.  
If the functions of the remote control become erratic,  
replace the batteries. See below for more information.  
SELECT  
STROBE  
SLOW+  
SLOW  
-
REPEAT SUB TITLE AUDIO  
VFP  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
Precautions for the safe use of batteries  
Observe the following precautions for the safe use of  
batteries. If they are used improperly their life will be  
shortened, they may burst or their contents may leak.  
RM-SXV012E  
REMOTE CONTROL  
Precautions  
NOTE  
• Remove the batteries from the remote control if it is not  
going to be used for a long period of time.  
• Remove dead batteries and dispose of them properly.  
• Never leave dead batteries lying around, take them  
apart, mix them with other refuse, or throw them into  
an incinerator.  
• If the remote sensor on the unit is exposed to the  
sunshine or strong light, you may not be able to control  
the unit from the remote control unit.  
• Never touch liquid that has leaked out of a battery.  
• Do not mix new and old batteries, or batteries of  
different types, when replacing them.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
5 Release TV/VIDEO - CANCEL.  
To use the remote control unit for TV  
operation  
6 Try to operate the TV by pressing  
TV STANDBY/ON  
.
If your TV turns on or off, you have successfully set  
the control signal.  
You can operate your TV from the remote control unit.  
The following buttons can be used for operating the  
TV.  
To use 5/(CH+, CH–), 2/3(VOL–, VOL+), TV/VIDEO -  
CANCEL and numeric buttons for TV control, set the  
TV - DVD switch to "TV."  
Setting the remote control signal for  
operating your TV  
TV  
DVD  
TV - DVD  
switch  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV STANDBY/  
ON  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV  
DVD  
TV7  
7
TV8  
8
TV0  
0
TV9  
9
Numeric  
buttons  
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
Turns the TV on or off.  
TV/VIDEO -  
CANCEL  
TV  
CH  
+
VOL-  
VOL+  
ENTER  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
Switches the TV input mode between  
TV and VIDEO.  
TV/VIDEO  
CANCEL  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
Selects the TV channels directly.  
* For some TVs, pressing "+10"  
functions as the "100+," while "10"  
functions as the ENTER button if  
your TV requires pressing the  
ENTER button after selecting a  
channel number.  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
TV1  
TV-/--  
10  
1
~
1 Set the TV - DVD switch to "TV."  
TV0  
0
2 Hold down TV/VIDEO - CANCEL until step 4 is  
finished.  
Mutes the TV sound.  
MUTING  
+10  
3 Enter the manufacturer code of your TV listed below  
by using the numeric buttons (0 to 9).  
Changes the TV channels.  
CH  
Example:  
+
To enter the manufacturer code "01": Press "0" then  
"1."  
CH  
-
Hint  
Adjusts the TV volume.  
• When you purchased the unit, the manufacturer code is set  
VOL  
-
VOL+  
to "JVC" (01).  
4 Press ENTER.  
Manufacturer code list  
NOTE  
Manufacturer  
AIWA  
No.  
Manufacturer  
MIVAR  
No.  
• If there is more than one code listed for the  
manufacturer of your TV, try them one by one until you  
succeed.  
36  
22  
02  
34  
29  
20  
22  
31  
BEIJING  
CCE  
NEC  
NOBLEX  
NOKIA  
CHANGHONG  
DAEWOO  
FERGUSON  
FINLUX  
To control the volume of a JVC’s  
amplifier or receiver  
17, 37  
27  
PANASONIC  
PEONY  
04, 11  
34, 38, 39  
10, 17, 21  
02  
30  
PHILCO  
You can control the volume of a JVC’s amplifier or  
receiver by using the AMP VOL +/– buttons on the  
remote control unit.  
FUNAI  
32  
PHILIPS  
RCA  
GRADIENTE  
GRUNDIG  
HITACHI  
ITT  
15, 20  
19  
05  
AMP VOL  
SAMSUNG  
12, 33,  
34, 35  
10  
Pressing the + button raises the audio volume of the  
amplifier or receiver, while pressing the – button lowers  
the volume.  
28  
SANYO  
SEARS  
SHARP  
SONY  
13, 16  
13  
JINXING  
JVC  
38  
01, 23,  
24, 25  
06  
07  
KONKA  
40  
TCL  
41  
LG (GOLDSTAR) 18  
THOMSON  
TOSHIBA  
ZENITH  
26  
MAGNAVOX  
MITSUBISHI  
02  
03  
08,14  
09  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
In the following description, we assume that the buttons on the remote control unit are mainly used; however, you may  
use the corresponding buttons on the front panel if available.  
NOTE  
Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the 5//2/3 and  
numeric buttons for controlling the unit.  
TV  
DVD  
Before operation  
Turning on/off the unit  
Press DVD STANDBY/ON  
The STANDBY indicator on the STANDBY/ON  
(on the remote control unit) or STANDBY/ON  
(on the front panel).  
button, which lights in red during standby, lights in green.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
DVD  
STANDBY/ON  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
STANDBY/ON  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
N
CH  
+
VOL-  
VOL+  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
ENTER  
DVD AUDIO PROGRESSIVE  
C
N
CH  
-
C
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
Hints  
• You can turn on the unit by pressing the 3 button. In this case, the unit starts playback if the disc is set in the disc tray.  
If no disc is set, [NO DISC] appears on the display window.  
• You can turn on the unit by pressing the 0 button on the front panel. In this case, the disc tray opens.  
The opening display shown at right appears on the TV screen.  
The following messages may appear at the bottom of the opening display.  
• NOW READING:  
The unit is reading the disc information.  
• REGION CODE ERROR!: The region code of the DVD VIDEO disc does not match the  
unit. The disc cannot be played back.  
• OPEN:  
• CLOSE:  
The disc tray is opening.  
The disc tray is closing.  
NOW READING  
• NO DISC:  
• RESUME STOP:  
No disc is loaded.  
The unit stops and memorizes the interrupted position.  
Message area  
NOTE  
• Even if you press the DVD STANDBY/ON  
(on the remote control unit) or STANDBY/ON  
(on the front panel) to turn off  
the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called  
standby mode. In this state, the unit consumes a very small amount of power.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Initial setup before using the unit  
We recommend you to set the display language, TV monitor type, analog audio output and digital output before using  
the unit, by following the procedure below.  
When turning on the unit for the first time, the DVD PLAYER SET UP display automatically appears. In such a case,  
perform the following procedure from step 2.  
See "Changing the initial settings" beginning on page 57 for details about each setting item.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
ENTER  
CH  
+
VOL-  
VOL+  
ENTER  
5/∞  
CH  
-
CHOICE  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
1 Press CHOICE for a few seconds to bring up  
the first page of the DVD PLAYER SET UP  
display.  
5 Press ENTER.  
The third (final) page is shown, in which the pull-  
down menu of the [ANALOG OUT] is already open.  
The pull-down menu of the [ON SCREEN  
LANGUAGE] is already open.  
DVD PLAYER SET UP  
DIGITAL AUDIO OUTPUT  
ANALOG OUT  
STREAM/PCM  
DOLBY PROLOGIC  
2-CH DOLBY SURROUND  
D. RANGE COMPRESSION  
2-CH STEREO  
MULTI CHANNEL  
DVD PLAYER SET UP  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
ON SCREEN LANGUAGE  
ENGLISH  
ENGLISH  
FRENCH  
GERMAN  
ANALOG OUT options  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
6 Use 5/to select a desired analog output  
ON SCREEN LANGUAGE options  
signal type.  
You must set this item correctly when you play  
back a DVD VIDEO disc recorded with surround  
multichannel audio.  
• When connecting with a surround decoder,  
select [2-CH DOLBY SURROUND].  
2 Use 5/to select a desired language.  
You can select the on-screen language for the  
preference displays, etc. from among English,  
French and German.  
• When connecting with a stereo amplifier/  
receiver or television set, select [2-CH STEREO].  
• When connecting the unit’s 5.1-channel input,  
select [MULTI CHANNEL].  
3 Press ENTER.  
The second page is shown, in which the pull-down  
menu of the [MONITOR TYPE] is already open.  
DVD PLAYER SET UP  
MONITOR TYPE  
STILL MODE  
SCREEN SAVER  
MP3/JPEG  
4:3 L.B.  
7 Press ENTER.  
16:9 NORMAL  
16:9 AUTO  
The pull-down menu of the [DIGITAL AUDIO  
OUTPUT] appears.  
4:3 LB  
4:3 PS  
DVD PLAYER SET UP  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
DIGITAL AUDIO OUTPUT  
ANALOG OUT  
DOLBY DIGITAL/PCM  
PCM ONLY  
DOLBY DIGITAL/PCM  
D. RANGE COMPRESSION  
STREAM/PCM  
MONITOR TYPE options  
4 Use 5/to select a desired monitor type.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
You can select the monitor type according to your  
TV.  
DIGITAL AUDIO OUTPUT options  
• For a normal (conventional) TV, select [4:3 LB] or  
[4:3 PS].  
• For a wide-screen TV, select [16:9 AUTO] or [16:9  
NORMAL].  
See page 59 for details about each mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
8 Use 5/to select a desired digital output  
signal type.  
You must set this item correctly when you connect  
the unit to an external surround decoder or D/A  
convertor (including an amplifier/receiver with  
built-in surround decoder or D/A convertor).  
(If you do not connect the unit to such a device,  
you do not have to set this item.)  
• When connecting with a Dolby Digital decoder,  
select [DOLBY DIGITAL/PCM].  
• When connecting with a DTS or MPEG  
Multichannel decoder, select [STREAM/PCM].  
• When connecting with other digital devices,  
select [PCM ONLY].  
9 Press ENTER.  
The TV screen returns to show the opening  
display.  
NOTES  
• This setting may not be necessary except when turning  
on the power after purchasing the unit.  
• You can also set these items, as well as other  
preferences, by pressing CHOICE briefly to bring up the  
preference display. See "Changing the initial settings"  
on and after page 57 for details.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Basic playback  
This section describes basic operations for playback of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs.  
For MP3 and JPEG disc playback, see the separate chapter beginning on pages 47 and 51.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
OPEN/CLOSE  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
7 3 8  
0
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
ENTER  
DVD AUDIO PROGRESSIVE  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
3
8
SELECT  
STROBE  
7
SLOW-  
SLOW+  
VFP  
Disc tray  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
Inserting and removing discs  
1 Press 0 to open the disc tray.  
2 Place a disc in the disc tray.  
3 Press 0 to close the disc tray.  
With the label side up  
The unit reads the disc information and the opening  
display appears on the TV screen.  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
E
IV  
S
S
E
R
G
O
R
P
IO  
D
U
A
D
V
D
Hint  
• If a menu is shown on the TV screen  
When inserting a DVD AUDIO, DVD VIDEO, SVCD or Video CD  
disc, a menu display may be automatically shown on the TV  
screen. From the menu, you can select a desired item to be  
played back by following the procedure below.  
• To insert an 8-cm disc, place  
it in the inner recess.  
(for DVD AUDIO/DVD VIDEO)  
1Use 5//2/3 to select a desired item.  
2Press ENTER.  
The unit starts playback of the selected item.  
(for SVCD/Video CD)  
Use the numeric buttons to select a desired item.  
The unit starts playback of the selected item.  
NOTES  
• Do not load a non-playable disc. For details about playable and non-playable disc types, see page 4.  
• When loading a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when  
the disc tray is closed, or you may not be able to remove the disc from the unit.  
• Do not use any stabilizer when playing back a disc.  
• With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.  
• If you insert a DVD VIDEO disc whose region code does not match the unit, [REGION CODE ERROR!] is shown in the opening  
display. For details about the region code, see page 4.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
To start playback  
Available :  
Press 3.  
The unit starts playback from the beginning.  
Hints  
About screen saver function  
• A television monitor may have an image burned into it if a static  
image is displayed for a long time. To prevent this, the unit  
automatically activates the screen saver function if a static  
picture, such as an on-screen display or menu, is displayed for  
over 5 minutes.  
While the screen saver  
function is not activated  
While the screen saver  
function is activated  
• Pressing any buttons on the unit or the remote control unit will  
release the screen saver function and return to the previous  
display.  
• You can also turn off the screen saver function (see page 59).  
• The screen saver function does not work for still images during  
DVD AUDIO playback.  
About On-screen guide icons  
• When you make an operation, you may see the following icons displayed over the picture for about 3 seconds. These have the  
following meanings.  
You can set the unit not to display these icons below via the preference settings described on page 62.  
Icon  
Status  
Appears at the beginning of playback mode.  
Appears at the beginning of pause mode.  
Appears at the beginning of fast forward/backward playback with the current speed (see page 22).  
Appears at the beginning of slow-motion playback with the current speed (see page 23).  
Appears at the beginning of a scene recorded from multiple angles (see page 38).  
Appears at the beginning of a scene recorded with multiple audio languages (see page 37).  
Appears at the beginning of a scene recorded with multiple subtitle languages (see page 36).  
About invalid operation icon  
• When you press a button, if the unit does not accept its operation, appears on your television screen. Operations are occasionally  
unacceptable even if is not displayed.  
Note that some operations may not be accepted. For example, some discs may not allow rapid advance/reverse or slow-motion  
playback.  
NOTES  
• When the RESUME function is [ON] or [DISC RESUME] and a resume point is set, pressing 3 starts playback from that point  
instead of the beginning. See page 21.  
• During playback, the display window shows the title/chapter, group/track or track number being played.  
• During DVD VIDEO playback, pressing 3 moves the playback position back 10 seconds before the current position. See page 26  
for details.  
To stop playback completely  
Available :  
Press 7.  
The unit stops playback.  
Hint  
• If you press 0 during playback, the unit stops playback and opens the disc tray.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
To stop playback temporarily  
Available :  
Press 8.  
The unit pauses playback. To resume playback, press 3.  
Resuming playback  
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position  
later.  
You can set two resume modes (DISC RESUME and ON) using the preference display. See page 62 for details about how  
to set the resume mode.  
Hints  
• The resume mode is initially set to [ON] when you purchased.  
• You can deactivate the resume mode by setting [RESUME] on the [OTHERS] preference display to [OFF].  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
OPEN/CLOSE  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
7 3  
0
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
VOL-  
VOL+  
DVD AUDIO PROGRESSIVE  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
3
SELECT  
STROBE  
7
Disc tray  
SLOW-  
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
To memorize the interrupt position  
Available :  
During playback  
When the resume mode is set to [DISC RESUME]  
Press 7 .  
The unit stops playback and memorizes the interrupt position. After pressing 7 , the display window on the front  
panel shows [RESUME STOP].  
In this condition, the memory of the interrupt position is not cleared if you press 0 to open the disc tray, or press  
STANDBY/ON  
(on the front panel) or DVD STANDBY/ON  
(on the remote control unit) to turn off the unit.  
Hints  
• The interrupt position is also memorized when you press 0 , STANDBY/ON  
(on the front panel) or DVD STANDBY/ON  
(on  
the remote control unit). In this case, [RESUME STOP] is not shown on the display window.  
• To clear the memory, press 7 while the disc stopped.  
• The unit memorizes interrupt positions for the last 30 discs played.  
• If you interrupt the playback of a disc for which an interrupt position has already been stored, the memory will be updated with the  
new interrupt position.  
• After the unit has stored interrupt positions for 30 discs, remembering a new interrupt position will cause the unit to delete the  
oldest stored position. Interrupting playback of a disc for which an interrupt position is already stored may change the order in  
which the positions are stored. This may potentially change the order in which positions are deleted.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
When the resume mode is set to [ON]  
Press 7 .  
The unit stops playback and memorizes the interrupt position.  
In this condition, the memory of the interrupt position is not cleared if you press STANDBY/ON  
(on the front  
(on the remote  
panel) or DVD STANDBY/ON  
(on the remote control unit) to turn off the unit.  
Note that if you press 0 to open the disc tray, the memory of the interrupt position is cleared.  
Hints  
• The interrupt position is also stored by pressing STANDBY/ON  
(on the front panel) or DVD STANDBY/ON  
control unit).  
• To clear the memory, press 7 while the disc stopped.  
To resume playback  
Available :  
When the resume mode is set to [DISC RESUME]  
While stopped, or no disc is inserted  
1 Press 0 to insert a disc for which the unit has stored an interrupt position.  
After loading the disc, the display window on the front panel shows [RESUME STOP].  
(If a disc for which you want to resume playback is already set in the disc tray, go to step 2.)  
2 Press 3.  
The display window shows [RESUME PLAY] and the unit resumes playback from the position where playback was  
interrupted.  
The unit maintains the memory of the interrupt position for the disc, even if you remove the disc from the disc tray  
and replace it again. The unit also maintains the memory of the interrupt position while the disc is in the disc tray.  
• To play back a disc from the beginning (instead of the interrupted position)  
After loading the disc, press 7 before pressing 3 to start playback.  
Pressing 7 while the disc is stopped clears the memory of the interrupted position.  
Every time you interrupt playback, the position is remembered as the new "resume" point.  
When the resume mode is set to [ON]  
While the disc you interrupted playback last time* is still on the disc tray (*by pressing 7 or by turning off the power)  
Press 3.  
The unit resumes playback from the position where playback was interrupted.  
If you press 3 then 7 , the unit starts playback after the display window shows [RESUME PLAY].  
Note that you cannot resume playback if you interrupted playback last time by opening the disc tray.  
• To play back a disc from the beginning (instead of the interrupted position)  
Do any of the following:  
* Press 7 while stopped, then press 3.  
* Turn on the unit by pressing DVD STANDBY/ON  
(on the remote control unit) or STANDBY/ON  
(on the  
front panel) then press 3.  
NOTES  
• If you use the [OTHERS] preference display to change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot  
resume playback of a disc whose "resuming" position is stored. However, if you again set [RESUME] to [DISC RESUME], you  
will then be able to resume playback of the disc.  
• If you open the disc tray while RESUME mode is set to ON, the "resume" point will be cleared.  
• The resume function does not work with Audio CD, MP3 and JPEG discs.  
• In the case of a SVCD/Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than  
the point where playback was interrupted.  
• The unit may not resume playback exactly from the interrupt point.  
• For a double-sided DVD AUDIO/DVD VIDEO disc, the unit regards each side as a different disc. Therefore, to resume playback  
of such a disc, the disc must be loaded with the same side down.  
• When the unit memorizes an interrupt point for a disc, it also remembers Audio, Subtitle and Angle settings (regardless of  
whether [RESUME] is set to [DISC RESUME] or [ON]).  
• If you interrupt playback while the menu for a DVD AUDIO, DVD VIDEO, SVCD or Video CD is shown on the TV screen, the unit  
may not correctly memorize the interrupt position, regardless of whether the [RESUME] mode is set to [ON] or [DISC  
RESUME].  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Variable speed playback  
You can speed up or slow down playback, or advance the video frame by frame.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
4 ¢  
TV0  
0
MUTING  
+10  
8
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
ENTER  
DVD AUDIO PROGRESSIVE  
CH  
-
4/¢  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
8
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
1/¡  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
To advance or reverse playback rapidly while monitoring  
Available :  
During playback  
Method 1 (from the remote control unit only)  
Press 1 or ¡.  
Each press of 1 or ¡ decreases or increases the playback speed. You can select from 2 times, 5 times, 10 times,  
20 times and 60 times normal speed.  
Pressing 3 returns the unit to normal playback.  
Method 2  
Hold down 4 or ¢.  
Holding down ¢ advances playback rapidly, while holding down 4 reverses playback rapidly, at 5 times the  
normal speed. Releasing the button returns the unit to normal playback.  
NOTES  
• During rapid playback, the sound will be muted except when playing an Audio CD. When using rapid playback with an Audio  
CD, the sound will be played discontinuously.  
• This function does not work for an MP3 disc.  
To advance a still picture frame by frame  
Available :  
While paused (still)  
Press 8.  
Each time you press 8, the still picture advances to the next frame.  
Pressing 3 returns to normal playback.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
To playback in slow-motion  
Available :  
You can playback video in slow-motion. You can select from 1/32 times, 1/16 times, 1/8 times, 1/4 times and 1/2 times  
normal speed.  
During playback  
Press 8, then use 1/¡.  
To play forward slow motion, press ¡, and to play reverse slow motion (for DVD VIDEO discs only), press 1 .  
First, the unit plays the slowest speed, and each time you press the button, the playback speed increases.  
Pressing 3 returns to normal playback. Pressing 8 pauses slow motion playback.  
NOTES  
• The sound is muted during slow motion playback.  
• Reverse slow motion playback is not possible for a SVCD and Video CD.  
To locate the beginning of the scene or song  
You can locate the desired group or track (for DVD AUDIO), title or chapter (for DVD VIDEO), or track (for SVCD/Video CD/  
Audio CD) from which the unit starts playback.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
Numeric  
buttons  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
4 ¢  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
ENTER  
DVD AUDIO PROGRESSIVE  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
4/¢  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
To locate a desired selection using 4 or ¢  
Available :  
For DVD AUDIO/Audio CD:  
For DVD VIDEO:  
During playback or while stopped  
During playback  
For SVCD/Video CD:  
During playback without PBC function  
Press 4 or ¢.  
With a DVD AUDIO, pressing the button skips a group or track depending on the disc configuration. With a DVD  
VIDEO disc, pressing the button skips a chapter or title depending on the disc configuration.  
With an SVCD, Video CD or Audio CD, pressing the button skips a track.  
The selection number appears in the display window on the front panel.  
• To skip forward titles/chapters/groups/tracks, press ¢ as many times as required.  
• To skip to the beginning of the current titles/chapters/groups/tracks, press 4 once.  
• To skip back titles/chapters/groups/tracks, press 4 as many times as required.  
NOTES  
• This function may not work with some DVD VIDEO discs.  
• This function does not work during SVCD/Video CD playback with PBC function (see pages 5 and 27).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
To locate a desired selection using the numeric buttons  
Available :  
During playback without PBC function or while stopped  
For DVD AUDIO/DVD VIDEO/Audio CD: During playback or while stopped  
For SVCD/Video CD:  
Use the numeric buttons to specify the number.  
Depending on the disc type and the unit status, what is specified differs.  
Unit status  
Disc type  
What is specified  
group or track*1  
DVD AUDIO  
DVD VIDEO  
While stopped  
title or chapter*2  
track  
SVCD/Video CD/Audio CD  
DVD AUDIO  
track  
During playback  
DVD VIDEO  
chapter  
track  
SVCD/Video CD/Audio CD  
*1Pressing the numeric buttons simply selects a track. To select a group (when a disc contains more than one  
group), press TITLE/GROUP before press the numeric buttons.  
*2Pressing the numeric buttons simply selects a chapter when a disc contains only one title, or selects a title when  
a disc contains more than one title.  
The selected title, group or track number appears in the display window on the front panel.  
• To select a number between 1 and 10: Press the corresponding button for the number.  
• To select a number higher than 10:  
Examples:  
Use the +10 button.  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
The unit starts playback from the beginning of the selection. The selected title, chapter, group or track number  
appears in the display window on the front panel.  
NOTES  
• You can also specify the desired title during DVD VIDEO playback. See page 28 for details.  
• During DVD AUDIO/DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting  
an item in the menu.  
• When appears on the TV screen:  
The title, chapter group or track you have selected is not contained in the disc.  
• This function does not work during SVCD/Video CD playback with PBC function (see pages 5 and 27).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Other convenient functions  
You can check the playback status, as well as change the brightness of the display window.  
Also, you can move back the playback position 10 seconds from the current position.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
5/∞  
VOL-  
VOL+  
ENTER  
CH  
-
ON SCREEN  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
3
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
ANGLE  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
To check the playback status  
Available :  
You can see the current selection number (the group/track number for DVD AUDIO, the title/chapter number for DVD  
VIDEO or track number for SVCD/Video CD/Audio CD), time information (the track, group or chapter time while stopped,  
or the elapsed track, group or chapter time during playback) and the transport status (stop, playback, pause etc.) on the  
TV screen.  
During playback or while stopped  
Press ON SCREEN.  
The playback status bar appears on the TV screen.  
(for DVD AUDIO)  
(for DVD VIDEO)  
Current track  
Current  
Current chapter  
Current  
Transfer rate  
Transfer rate  
number transport status  
number transport status  
GROUP 3 TRACK 33 TOTAL 1:25:58  
TITLE 33 CHAP 33 TOTAL 1:25:58  
8.5Mbps  
8.5Mbps  
Current group number Current track  
time  
Current title number  
Current  
chapter time  
(for SVCD)  
(for Video CD)  
Current  
transport status  
Current  
transport status  
TRACK 33 TIME  
25:58  
TRACK 33 TIME  
25:58  
Current track number Disc elapsed  
time  
Current track number Disc elapsed  
time  
(for Audio CD)  
Current transport status  
TRACK 33 TIME  
25:58  
Current track number Disc elapsed  
time  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
The indication on the rightmost end of the status bar shows the unit’s transport status as follows:  
Icon  
Status  
Playback mode.  
Stop mode.  
Pause mode.  
Fast forward/backward playback mode.  
Slow motion playback mode.  
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access  
various functions.  
(Example of the menu bar for DVD VIDEO)  
TITLE 33 CHAP 33 TOTAL 1:25:58  
1/3 1/5 1/3  
8.5Mbps  
OFF  
CHAP.  
See page 43 for details about the menu bar.  
NOTES  
• To dismiss the status bar:  
Press ON SCREEN until the status bar is dismissed.  
• The status bar cannot be displayed during MP3/JPEG playback.  
To move back the playback position during DVD VIDEO playback  
[One touch replay function]  
Available :  
During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position.  
During DVD VIDEO playback  
Press 3.  
The playback position moves back 10 seconds before the current position.  
Note that this function works only within the same title, though it works between chapters.  
If you press 3 within 10 seconds from the beginning of a title, playback starts from the beginning of the title.  
NOTES  
• This function works only with DVD VIDEO discs.  
• When appears on the TV screen:  
This function may not work with some DVD VIDEO discs.  
To change the brightness of the display window  
You can adjust the brightness of the display window.  
Press 5 or while holding down ANGLE.  
You can select the display window brightness from four levels, or off. If the brightness is set to off, nothing will be  
shown on the display.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
This chapter describes operations for various advanced  
functions of DVD AUDIO, DVD VIDEO, SVCD, Video CD  
and Audio CD discs. For MP3 and JPEG disc playback,  
see the separate chapters beginning on pages 47 and 51.  
Hint  
• About DVD menu  
Normally, a DVD AUDIO disc which contains more than one  
group may have a "top" menu which lists the groups.  
Similarly, a DVD VIDEO disc which contains more than one  
title may have a "title" menu which lists the titles. In this  
case, the menu appears on the TV screen when you press  
the TOP MENU button. Some DVD AUDIO/DVD VIDEO discs  
may also have a different menu which appears when the  
MENU button is pressed.  
NOTE  
Make sure that the TV - DVD switch on  
TV  
DVD  
the remote control unit is set to "DVD"  
when using the 5//2/3, numeric  
and TV/VIDEO - CANCEL buttons for  
controlling the unit.  
See the instructions of each DVD AUDIO/DVD VIDEO disc  
for its particular menu.  
Playing from a specific  
position on a disc  
2 Use 5//2/3 to select a desired item, then  
press ENTER.  
The unit starts playback of the selected item.  
You can play a disc from the selected track, title or  
chapter, or from the specified time.  
Hint  
• With some discs, you can also select items by entering the  
corresponding number using the numeric buttons, which  
may cause the unit to automatically start playback  
To locate a desired scene from the DVD  
menu  
NOTES  
• When appears on the TV screen when you press TOP  
MENU or MENU in step 1:  
The disc does not have an appropriate menu listing the  
Available :  
DVD AUDIO/DVD VIDEO discs generally have their own  
menus which show the disc contents. These menus  
contain various items such as titles of movies, names of  
songs, or artist information, and display them on the TV  
screen. You can locate a desired scene using the DVD  
menu.  
titles.  
• The MENU button does not work while stopped.  
To locate a desired scene from the  
menu of a SVCD/Video CD with PBC  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Available :  
TV0  
0
MUTING  
+10  
Some SVCD/Video CD discs support the PBC function.  
PBC is an abbreviation of "PlayBack Control." A SVCD/  
Video CD disc recorded with PBC has its own menus,  
such as a list of the songs of the disc. You can locate a  
specific scene by using the PBC menu.  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TOP  
MENU  
CH  
+
MENU  
VOL-  
VOL+  
ENTER  
5//2/3  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
REPEAT SUB TITLE AUDIO  
TV  
DVD  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
TV1  
1
TV2  
2
TV3  
3
3D  
PAL/  
TV4  
4
TV5  
5
TV6  
6
PHONIC  
NTSC  
AMP VOL  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
RM-SXV012E  
REMOTE CONTROL  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
RETURN  
TOP  
MENU  
CH  
+
VOL-  
VOL+  
ENTER  
Whenever a DVD AUDIO/DVD VIDEO disc is loaded  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
3
1 Press TOP MENU or MENU.  
SLOW  
-
SLOW+  
VFP  
The menu appears on the TV screen.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
Example  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
When a SVCD/Video CD disc with PBC is stopped  
To specify a desired title/group  
1 Press 3 or TOP MENU.  
A disc menu appears on the TV screen (the PBC  
function is activated).  
Available :  
While playing back a DVD AUDIO/DVD VIDEO disc with  
more than one title or one group, you can specify a  
desired title to or group be played using the numeric  
buttons.  
Example  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
[PBC] is indicated in the display window on the  
front panel.  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TITLE/  
GROUP  
CH  
+
VOL-  
VOL+  
ENTER  
CH  
-
2 Use the numeric buttons to select the desired  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
item.  
SLOW  
-
SLOW+  
VFP  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
Examples:  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
RM-SXV012E  
REMOTE CONTROL  
During playback  
The unit starts playback of the selected item.  
You can return to the menu by pressing the  
RETURN button.  
When something like [NEXT] or [PREVIOUS]  
appears on the TV screen, the unit generally works  
as follows:  
1 Press TITLE/GROUP.  
[--] is shown in the title display area of the display  
window.  
(Display window example for DVD VIDEO)  
• Pressing ¢ advances to the next page.  
• Pressing 4 returns to the previous page.  
* The method of the operation may be different on  
different discs.  
Title display area  
Current chapter number  
Hints  
• If you want to play a PBC-compatible SVCD/Video CD disc  
without activating the PBC function, start playback using  
the numeric buttons instead of 3. (See page 24).  
• To activate the PBC function when a PBC-compatible SVCD/  
Video CD disc is being played back without the PBC  
function, do any of the following:  
2 Use the numeric buttons to specify a title or  
group to be played.  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
*Press TOP MENU or MENU.  
*Press 7 to stop playback, then press 3 .  
Examples:  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
The unit starts playback from the specified title or  
group.  
NOTE  
• This function may not work with some DVD AUDIO/  
DVD VIDEO discs.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Hints  
To locate a desired position in the  
current title, group or track [Time  
search]  
• "10" button works as "0" and "+10" button is not used with  
this function.  
• You can specify the time in hour/minute/second format for  
DVD AUDIO/DVD VIDEO discs, and in minute/second  
format for SVCD and Video CD/Audio CD discs.  
Available :  
4 Press ENTER.  
You can play a disc from the desired position by  
specifying the time from the beginning of the current  
group (for DVD AUDIO), current title (for DVD VIDEO), or  
the disc (for SVCD/Video CD/Audio CD) using the time  
search function.  
Note that some DVD VIDEO discs do not contain time  
information, and the time search function cannot be  
used.  
The unit starts playback from the specified time.  
• Example (for DVD AUDIO/DVD VIDEO)  
To playback from 2(H):34(M):00(S)  
TIME _ : _ _ : _ _  
Press [2].  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TIME 2 : _ _ : _ _  
Press [3].  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
Numeric  
buttons  
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TIME 2 : 3 _ : _ _  
Press [4].  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
2/3  
CH  
+
VOL-  
VOL+  
ENTER  
TIME 2 : 3 4 : _ _  
CH  
-
ON SCREEN  
PREVIOUS  
CLEAR  
NEXT  
ENTER  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
Press ENTER.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
• Example (for SVCD/Video CD/Audio CD)  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
To playback from 23(M):40(S)  
RM-SXV012E  
REMOTE CONTROL  
TIME _ _ : _ _  
Press [2].  
TIME 2 _ : _ _  
Press [3].  
For DVD AUDIO/DVD VIDEO/Audio CD:  
During playback or while stopped  
For SVCD/Video CD:  
In any condition except SVCD/Video  
CD playback with PBC  
TIME 2 3 : _ _  
Press [4].  
TIME 2 3 : 4 _  
1 Press ON SCREEN twice.  
The menu bar appears on the TV screen.  
(See page 43 for details about menu bar.)  
Press ENTER.  
You do not have to press "0" to enter the trailing zeros  
(for the last two digits in the example above).  
2 Use 2/3 to move to  
, then press  
ENTER.  
• To correct a mistake  
The pull-down menu for entering time appears  
Use 2 repeatedly to move back to the digit where you  
entered a undesired numeral (the leftmost [-] digit),  
and reenter the correct time.  
under the  
.
(Screen example for DVD VIDEO)  
(Example : changing [2:35:__] to [2:34:__].)  
TITLE 33 CHAP 33 TOTAL 1:25:58  
1/3 1/5 1/3  
8.5Mbps  
OFF  
CHAP.  
TIME 2 : 3 5 : _ _  
Press 2 .  
TIME _:__:__  
(Screen example for Audio CD)  
TIME 2 : 3 _ : _ _  
Press [4].  
TRACK 33 TIME  
25:58  
OFF  
PROG. RND.  
TIME __:__  
TIME 2 : 3 4 : _ _  
3 Use the numeric buttons (0 to 10) to enter the  
desired time.  
The specified time is displayed in the pull-down  
menu.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Disc type  
Unit status  
What is displayed  
NOTES  
• When a DVD AUDIO disc is stopped, you can specify the  
elapsed time from the beginning of group 1.  
• When appears on the TV screen:  
The time you have selected is not contained on the disc,  
or the time search function does not work on the disc.  
Also note that the time search function does not work  
during SVCD/Video CD playback with the PBC function.  
• To dismiss the menu bar:  
While stopped  
The opening scene  
of each title  
DVD  
VIDEO  
During playback  
The opening scene  
of each chapter in  
the current title  
SVCD/  
Video CD  
While stopped or  
during playback  
The opening scene  
of each track  
Press ON SCREEN.  
• The time search function cannot be used during  
program playback.  
2 Use 5//2/3 to move to select the  
desired scene.  
If there are more than 9 scenes, the digest screen  
will have more than one page. In this case,  
pressing ¢ advances to the next page, while  
pressing 4 returns to the previous page.  
To locate a specific scene from the  
display [DIGEST]  
Available :  
The unit can display the opening scene of each title or  
chapter on a DVD VIDEO or each track of a SVCD/Video  
CD. You can select a specific scene from those displayed  
on the TV screen.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
Selected scene  
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV0  
0
TV9  
9
MUTING  
+10  
TITLE/  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
GROUP  
Hints  
CH  
+
• When the lower right scene is selected, pressing 3  
advances to the next page if available. Similarly, when the  
upper left scene is selected, pressing 2 returns to the  
previous page (if available).  
VOL  
-
VOL+  
ENTER  
5//2/3  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
• Depending on discs, it may take some time until all scenes  
of the current page appear on the TV screen. If you want to  
turn the page, you do not have to wait to press 4 or ¢  
until all scenes appear.  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
DIGEST  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
3 Press ENTER.  
RM-SXV012E  
REMOTE CONTROL  
The unit starts playback from the selected scene.  
For DVD VIDEO:  
During playback or while  
stopped  
NOTE  
• With some discs, depending on the contents, it may  
take some time until all the scenes appear on the  
screen.  
For SVCD/Video CD: In any condition except SVCD/  
Video CD playback with PBC  
1 Press DIGEST.  
Up to nine opening scenes are displayed.  
Depending on the disc type and whether the disc is  
being played back or not, the contents shown on  
the TV screen differ.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To select a still picture on a DVD AUDIO  
disc [PAGE]  
To play back a bonus group of a DVD  
AUDIO disc  
Available :  
Most DVD AUDIO discs include still pictures, which  
usually appear in turn automatically during playback  
according to the playback sequence. However, there are  
other page(s) of the current still picture and you can  
change the picture (turn the page) manually.  
Available :  
Some DVD AUDIO discs contain a special group called  
"bonus group" whose contents are not opened to the  
public. The bonus group is always assigned to the last  
group of a disc (for example, if a disc contains four  
groups including a bonus group, "group 4" is the bonus  
group).  
To play back a bonus group, you have to enter the  
specific "key number" (a kind of password) for the bonus  
group. A way of getting the key number depends on  
discs.  
After getting the key number, you can play back the  
bonus group by the following procedure.  
Hint  
• At the beginning of a part where there are selectable  
pictures, [PAGE] appears on the TV screen (except when  
the [ON SCREEN GUIDE] preference is set to [OFF]). See  
page 62 for details about [ON SCREEN GUIDE] preferences.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV1  
1
TV2  
2
TV3  
3
TV  
DVD  
TV4  
4
TV5  
5
TV6  
6
TV1  
1
TV2  
2
TV3  
3
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV4  
4
TV5  
5
TV6  
6
TV0  
0
MUTING  
+10  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TV0  
0
MUTING  
+10  
PAGE  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
CH  
RETURN  
PAGE  
+
5/∞  
VOL-  
VOL+  
CH  
+
ENTER  
ENTER  
VOL-  
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
CH  
-
SELECT  
STROBE  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW-  
SLOW+  
VFP  
SLOW-  
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
RM-SXV012E  
REMOTE CONTROL  
During playback  
(except when the status bar is shown)  
While a disc containing a bonus group is stopped  
1 Use the numeric buttons to select the bonus  
1 Press PAGE.  
group number (the last group).  
The Page selection window appears on the TV  
screen.  
The display window and on-screen display prompt  
you to enter the key number as shown below.  
PAGE 1/32  
(TV screen)  
(Display Window)  
1
KEY _ _ _ _  
2 Use PAGE or 5/to select the desired page.  
Each time you press PAGE or 5/, the page  
2 Use the numeric buttons (0 to 9) to enter the  
number changes.  
key number.  
If you enter the key number correctly, the unit  
starts playback of the bonus group.  
If you enter a wrong key number, the unit does not  
start playback and the display window and TV  
screen again prompt you to reenter the key  
number.  
3 Press ENTER.  
The selected page (picture) is shown.  
The Page selection window is dismissed.  
NOTES  
• The Page selection window will automatically  
disappear if you do not change the page for several  
seconds.  
• You can also select the page via the menu bar. See  
page 44.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
NOTES  
Changing the playback  
order  
• Once you enter the correct key number, the unit  
memorizes it until you turn off the power or open the  
disc tray.  
• If you specify a track in the bonus group when  
programming tracks for the program playback, the  
display window will also show the above display for  
inquiring the key number.  
You can play tracks on a DVD AUDIO, SVCD, Video CD or  
Audio CD in a specific order or in random order.  
• In the random playback mode, tracks in the bonus  
group are not played back.  
• To turn off the key number entry display, operate any  
one of the following.  
* Press 7 .  
* Open the disc tray.  
To playback in a specific order  
[Program play]  
Available :  
* Turn the power off.  
By programming tracks, you can play up to 99 tracks in  
any order. You may program the same track more than  
once.  
Opening the disc tray or turning the power off also  
erases the memory of the key number, while pressing 7  
does not erase the memory.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
2/3  
CH  
+
VOL-  
VOL+  
ENTER  
CH  
-
ON SCREEN  
PREVIOUS  
CLEAR  
NEXT  
ENTER  
SELECT  
STROBE  
7
3
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
While stopped  
1 Press ON SCREEN twice.  
The menu bar appears on the TV screen.  
(See page 43 for details about menu bar.)  
PROG.  
2 Use 2/3 to move to  
.
(Screen example for DVD Audio)  
GROUP 3 TRACK 33 TOTAL 1:25:58  
PROG. RND. 1/3 PAGE 32/32  
8.5Mbps  
OFF  
TRACK  
3 Press ENTER.  
The program table appears instead of the menu  
bar.  
The PROGRAM indicator lights in the display  
window on the front panel.  
(Program table example for DVD AUDIO)  
Total Program Time  
00:00:00  
PROGRAM  
No.  
Group TrackDisc  
1
2
3
4
5
2
3
7
4
3
5
6
6
7
8
9
10  
USE NUMERIC KEYS TO PROGRAM TRACKS.  
CANCEL DELETES THE LAST STEP. 7 DELETES ALL.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
• To check the program contents  
4 a (for DVD AUDIO)  
During playback, press 7 . Playback stops and the  
Specify selections in the desired order by  
group and track numbers using the numeric  
buttons.  
program table is shown.  
When the unit is playing back an Audio CD and the  
program table is not shown, you can bring up the table  
by carrying out steps 1 to 3.  
During DVD AUDIO/SVCD/Video CD playback, you  
cannot see the program table during playback.  
• For each program step, using the numeric  
buttons, specify a group first, then specify a  
track.  
• For example, to specify "track 14 in group 2,"  
Press 2 +10 4.  
• To quit program playback  
Press 7 . Note that the program remains.  
• To clear the program  
4 b (for SVCD/Video CD/Audio CD)  
Specify tracks in the desired order using the  
numeric buttons.  
While stopped and the program table is shown on the  
TV screen, press 7 .  
All the programmed tracks are erased.  
• To exit the program mode  
After clearing all programmed tracks, press ON  
SCREEN.  
The program table is dismissed and the status bar  
appears on the TV screen.  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
Examples:  
The PROGRAM indicator in the display window  
disappears and the unit quits program playback mode.  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
NOTES  
• During program playback, you cannot edit the program  
contents.  
Up to 99 tracks can be programmed. You may  
select the same track more than once.  
The total program time is shown at the right top of  
the program table.  
• During program playback, pressing ¢ skips to the  
next selection of the program. Pressing 4 returns to  
the beginning of the current selection.  
• If you are going to program a track in the bonus group  
of a DVD AUDIO, the unit will ask you to enter the key  
number for the bonus group (see page 31).  
• To dismiss the program table:  
(Program table example for DVD AUDIO)  
The total program time  
Press ON SCREEN. The program table is dismissed and  
the status bar is shown.  
Total Program Time  
00:25:12  
PROGRAM  
• To dismiss the menu bar (and the status bar):  
Press ON SCREEN.  
No.  
Group  
TrackDisc  
1
2
3
4
5
2
3
7
4
3
5
6
1
-
-
-
-
-
-
-
9
12  
6
8
6
5
4
2
3
4
6
6
7
14  
20  
8
9
10  
USE NUMERIC KEYS TO PROGRAM TRACKS.  
CANCEL DELETES THE LAST STEP. 7 DELETES ALL.  
Selected group/track number  
• If you specify a wrong track  
Use 5/to move to the wrong track, then  
press TV/VIDEO - CANCEL. The track is erased  
and the subsequent programmed tracks move  
up.  
• To clear the program while programming  
Press 7 .  
5 Press 3 to start program playback.  
With a DVD AUDIO/SVCD/Video CD disc, the  
program table is automatically dismissed when  
the program playback starts.  
With an Audio CD disc, the program table remains  
on the TV screen during program playback.  
However, pressing the ON SCREEN button brings  
up the status bar.  
When all of the programmed tracks have finished  
playback, the unit stops and the program table  
appears again.  
Note that the program remains.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To playback in random order  
[Random play]  
Repeat playback  
You can repeat playback of the current group or track  
(for DVD AUDIO), current title or chapter (for DVD  
VIDEO), or current track or all tracks (for SVCD/Video CD/  
Audio CD).  
Available :  
You can play tracks on a disc in random order by using  
the random function.  
You can also repeat playback of a desired part.  
TV  
DVD  
STANDBY/ON  
To repeat the current selection or all  
tracks [Repeat playback]  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
Available :  
2/3  
CH  
+
TV1  
TV2  
2
TV3  
3
VOL-  
VOL+  
1
ENTER  
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV9  
9
CH  
-
ON SCREEN  
TV-/--  
10  
TV0  
0
MUTING  
+10  
PREVIOUS  
CLEAR  
NEXT  
ENTER  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
SELECT  
STROBE  
RETURN  
PAGE  
CH  
+
SLOW  
-
SLOW+  
VFP  
VOL-  
VOL+  
ENTER  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
CH  
-
DIGEST ANGLE  
PREVIOUS  
CLEAR  
NEXT  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
RM-SXV012E  
REMOTE CONTROL  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
REPEAT  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
While stopped  
RM-SXV012E  
REMOTE CONTROL  
1 Press ON SCREEN twice.  
The menu bar appears on the TV screen.  
(See page 43 for details about menu bar.)  
For DVD AUDIO/DVD VIDEO:  
During playback  
For SVCD/Video CD/Audio CD:  
In any condition except SVCD/Video  
CD playback with PBC  
RND.  
2 Use 2/3 to move to  
.
(Screen example for Audio CD)  
TRACK 33 TIME  
25:58  
1 Press REPEAT.  
OFF  
PROG. RND.  
Each time you press REPEAT, the repeat mode  
cycles among All repeat, Repeat 1 and off.  
The selected mode is reflected in icons displayed  
in the front panel display window, as shown  
below.  
3 Press ENTER.  
The unit starts random playback.  
With a DVD AUDIO/SVCD/Video CD disc, the menu  
bar is automatically dismissed.  
During random playback, the RANDOM indicator  
lights in the display window on the front panel.  
After playing all tracks of the disc, the unit stops  
the disc and exits the random mode.  
If you press REPEAT while stopped, you need to  
press 3 to start repeat playback.  
REPEAT:  
Repeats the current group for  
DVD AUDIO, current title for DVD  
VIDEO or all tracks for SVCD/  
Video CD/Audio CD.  
Repeats the current chapter for  
DVD VIDEO or the current track  
for DVD AUDIO/SVCD/Video CD/  
Audio CD.  
REPEAT 1:  
Hints  
• The same track will not be played back more than once  
during random play.  
• During random playback, if you bring up the menu bar and  
carry out steps 1 to 3 above, the unit cancels random  
playback mode and continues playback from the current  
selection in the recorded order.  
No indication:  
The repeat mode is off.  
(Display window)  
• In the random playback mode with the DVD AUDIO, tracks  
in the bonus group are not played back (see page 31).  
• To stop and quit random playback  
Press 7 . The unit stops playback and exits the random  
playback mode.  
Repeat mode indicators  
A window which indicates the current repeat mode  
will be displayed on the TV screen.  
The mode indication on the window is same as the  
one on the menu bar (see pages 44, 45 and 46).  
(Repeat mode example on the TV screen)  
NOTE  
• To dismiss the menu bar:  
Press ON SCREEN.  
CHAP.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
• To stop repeat playback  
Press 7 .  
3 Use 5/to select [A-B].  
Depending on the disc type and unit’s status the  
repeat mode changes as follows:  
When a DVD VIDEO or DVD AUDIO disc is set, the unit  
stops playback and quits the repeat mode.  
When an SVCD, Video CD or Audio CD disc is set, the  
unit stops playback but does not quit the repeat mode.  
• During DVD AUDIO playback  
GROUP 3 TRACK 33 TOTAL 1:25:58  
PROG. RND. 1/3 PAGE 32/32  
8.5Mbps  
TRACK  
• To quit repeat playback  
Press REPEAT until the repeat mode indicator goes off  
in the display window.  
A-B  
Selected repeat mode  
NOTES  
• You can also select the repeat mode via the menu bar.  
See pages 44, 45 and 46.  
• When the program playback mode is active with a DVD  
AUDIO, SVCD, Video CD or Audio CD, the repeat mode  
changes in the same manner.  
Note that, however, in the " " mode the unit repeats  
all the programmed tracks, instead of all tracks on the  
disc.  
• During playback in the title/chapter/group/track repeat  
mode, if you skip the title/chapter/group/track using  
4/¢, etc., the destination title/chapter/group/track  
is repeated.  
TRACK :  
GROUP :  
A-B :  
current track repeat  
current group repeat  
repeats a desired part  
(during playback only)  
OFF  
• During DVD VIDEO playback  
• If appears when pressing REPEAT during DVD VIDEO  
playback.  
TITLE 33 CHAP 33 TOTAL 1:25:58  
1/3 1/5 1/3  
8.5Mbps  
The disc content does not allow title or chapter repeat.  
• Repeat playback function cannot be used during SVCD/  
Video CD playback with PBC function.  
CHAP.  
A-B  
Selected repeat mode  
CHAPTER : current chapter repeat  
To repeat a desired part  
[A-B repeat playback]  
TITLE :  
A-B :  
OFF  
current title repeat  
Available :  
TV  
DVD  
repeats a desired part  
(during playback only)  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
• SVCD/Video CD/Audio CD  
CH  
+
VOL  
-
VOL+  
TRACK 33 TIME 25:58  
5//2/3  
ON SCREEN  
ENTER  
ENTER  
PROG. RND.  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
A-B  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
Selected repeat mode  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
TRACK :  
ALL :  
A-B :  
current track repeat  
RM-SXV012E  
REMOTE CONTROL  
all track repeat  
During playback except SVCD/Video CD playback with  
PBC  
repeats a desired part  
(during playback only)  
1 Press ON SCREEN twice.  
The menu bar appears on the TV screen.  
(See page 43 for details about menu bar.)  
OFF  
2 Use 2/3 to move to  
, then press  
ENTER.  
The pull-down menu for repeat mode selection  
appears under the  
.
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
4 Press ENTER at the beginning of the part you  
want to repeat (point A).  
Changing the language,  
sound and scene angle  
The pull-down menu disappears.  
A-  
The repeat icon shows  
.
(Screen example for DVD VIDEO)  
With some DVD AUDIO/DVD VIDEO discs, you can  
choose a desired subtitle language and/or audio  
language/sound, as well as a desired camera angle.  
Some DVD AUDIO discs support more than one audio  
language/sound, with some DVD VIDEO discs support  
more than one subtitle language and/or audio language/  
sound.  
TITLE 33 CHAP 33 TOTAL 1:25:58  
1/3 1/5 1/3  
8.5Mbps  
A-  
CHAP.  
Repeat icon  
5 Press ENTER at the end of the part you want  
Similarly, you can choose a desired audio channel (or  
channel combination) of a SVCD/Video CD disc, as well  
as a subtitle channel of an SVCD disc.  
to repeat (point B).  
A-B  
The repeat icon show  
.
The unit locates [A] and starts repeat playback  
between [A] and [B].  
To select the subtitle language  
[SUBTITLE]  
• To quit A-B repeat playback  
Press ENTER. The A-B repeat mode turns off, while the  
playback continues.  
Available :  
Some DVD AUDIO/DVD VIDEO and SVCD discs for  
movies, guides, etc. contain more than one subtitle  
language. You can choose a desired one from them.  
Hints  
• Selecting [OFF] from the pull-down menu for repeat mode  
selection, or pressing 4/¢ quits the A-B repeat mode  
and continues playback.  
• You can also stop and quit A-B repeat mode by pressing 7 .  
Hint  
• At the beginning of the part where the subtitles are  
NOTES  
recorded,  
appears on the TV screen (except when the  
• The A and B points must be set in the same title/  
chapter/group/track.  
• To dismiss the menu bar:  
[ON SCREEN GUIDE] preference is set to [OFF]). See page  
62 for details about [ON SCREEN GUIDE] preference.  
Press ON SCREEN.  
• If appears when pressing ENTER during DVD VIDEO  
playback  
The disc content does not allow you to repeat the  
selected part.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
5/∞  
VOL-  
VOL+  
ENTER  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
SUBTITLE  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
During DVD AUDIO/DVD VIDEO/SVCD playback  
(except when the status bar is shown)  
1 Press SUBTITLE.  
The Subtitle selection window appears on the TV  
screen.  
1/3  
ENGLISH  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
2 Use 5/or SUBTITLE to select the subtitle.  
To change the audio language or sound  
[AUDIO]  
Each time you press 5/or SUBTITLE, the subtitle  
language changes.  
See the following examples for subtitle selection.  
• For DVD AUDIO/DVD VIDEO  
Available :  
Pressing 5/or SUBTITLE cycles through the  
The audio selection setting allows you to change the  
audio language of a movie, or to listen to Karaoke with  
or without the vocal.  
subtitles recorded on the disc.  
Example:  
1/3 ENGLISH  
Hint  
• At the beginning of the part where multiple audio tracks are  
recorded,  
appears on the TV screen (except when the  
2/3 FRENCH  
3/3 SPANISH  
-/3 OFF  
[ON SCREEN GUIDE] preference is set to [OFF]). See page  
62 for details about [ON SCREEN GUIDE] preference.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
• For SVCD  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
An SVCD disc can have up to four subtitles.  
Pressing 5/cycles through those channels as  
follows regardless of whether the subtitles are  
recorded or not.  
RETURN  
PAGE  
CH  
+
5/∞  
VOL  
-
VOL+  
ENTER  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
-/4 OFF  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
AUDIO - fs/Rate  
1/4  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
2/4  
During playback  
3/4  
(except when the status bar is shown)  
4/4  
1 Press AUDIO - fs/Rate.  
The audio selection window appears on the TV  
screen.  
3 Press ENTER.  
Subtitles are displayed in the selected language.  
The subtitle selection window is dismissed.  
1/3  
ENGLISH  
NOTES  
• For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See "Table of languages  
and their abbreviations" on page 58.  
• The Subtitle selection window will automatically  
disappear if you do not change the subtitle for several  
seconds.  
• When appears on the TV screen (for DVD AUDIO/  
DVD VIDEO disc):  
You cannot select the subtitle or no subtitle is recorded.  
• You can also select the subtitle via the menu bar. See  
pages 45 and 46.  
2 Use AUDIO - fs/Rate or 5/to select the  
desired audio.  
Each time you press 5/or AUDIO - fs/Rate, the  
audio changes.  
See the following examples for audio selection.  
• For DVD AUDIO/DVD VIDEO  
Each time you press 5/or AUDIO - fs/Rate, the  
audio language or sound changes.  
Example:  
1/3 ENGLISH  
2/3 FRENCH  
3/3 SPANISH  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
• For SVCD/Video CD  
Each time you press 5/or AUDIO - fs/Rate, the  
To select a scene angle of DVD VIDEO  
[ANGLE]  
playback audio changes as follows.  
(for SVCD)  
(for Video CD)  
ST (stereo)  
ST1  
Available :  
You can enjoy a variety of scene angles if the DVD VIDEO  
disc contains "multi-angle" parts, where multiple  
cameras were used to shoot the same scene from  
different angles.  
ST2  
L-1  
R-1  
L-2  
R-2  
L
R
Hint  
• At the beginning of a "multi-angle" part,  
appears on the  
TV screen (except when the [ON SCREEN GUIDE]  
preference is set to [OFF]). See page 62 for details about  
[ON SCREEN GUIDE] preference.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
3 Press ENTER.  
VOL  
-
VOL+  
ENTER  
5//2/3  
ENTER  
ANGLE  
You can hear the selected audio.  
CH  
-
The audio selection window is dismissed.  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
3
SLOW  
-
SLOW+  
VFP  
NOTES  
REPEAT SUB TITLE AUDIO  
• For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See "Table of languages  
and their abbreviations" on page 58.  
• The Audio selection window will automatically  
disappear if you do not change the audio for several  
seconds.  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
• When appears on the TV screen (for a DVD AUDIO/  
DVD VIDEO disc):  
You cannot select the audio.  
• If only one audio track is recorded, you cannot change  
the audio selection.  
• You can also select the audio via the menu bar. See  
pages 44, 45 and 46.  
From the Angle selection window  
During DVD VIDEO playback  
(except when the status bar is shown)  
1 Press ANGLE.  
The Angle selection window appears on the TV  
screen.  
1/3  
1
2 Use ANGLE or 5/to select the desired  
angle.  
Each time you press ANGLE or 5/, the angle  
changes.  
Example:  
1/3  
2/3  
3/3  
3 Press ENTER.  
You can see the picture from the selected angle.  
The angle selection window is dismissed.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
From the angle list  
During DVD VIDEO playback  
Special picture playback  
and picture/sound effect  
1 Press and hold ANGLE for more than 1  
You can view continuous still images, or zoom into or  
out of the picture. You can also adjust the picture  
characteristics, as well as simulate surround sound  
using a stereo system.  
second.  
Up to nine camera angles recorded on a disc  
appear on the TV screen.  
To display continuous still pictures  
[STROBE]  
Available :  
TV7  
7
TV8  
8
TV9  
9
The selected camera angle  
2 Use 5//2/3 to select the desired angle.  
3 Press ENTER or 3.  
TV-/--  
10  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL  
-
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
8
SLOW  
-
SLOW+  
VFP  
The unit starts playback using the selected angle  
on the full-sized screen.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
NOTES  
• The Angle selection window will automatically  
disappear if you do not change the angle for several  
seconds.  
RM-SXV012E  
REMOTE CONTROL  
• When appears on the TV screen in step 1:  
The current scene is not recorded from multiple angles.  
• During the operation from the angle list display, audio  
is muted.  
• You can also select the angle via the menu bar. See  
page 45.  
During playback  
1 At the point where you want to begin viewing  
continuous still images, press 8.  
The unit pauses playback.  
2 Press and hold 8 for more than 1 second.  
Nine copies of the same frame (still images) will  
appear on the TV screen.  
You can advance these frames using the following  
step.  
3 Press 8 once.  
The image in the middle of the top row shows the  
next frame of video after the one on the upper left.  
Advanced frame  
Each press of 8 advances the video by one frames.  
Pressing 3 instead of 8 advances each frame at  
normal playback speed with a time delay over the  
whole nine pictures (while the sound is muted).  
• To return to the normal screen  
Press and hold 8 for more than 1 second.  
NOTE  
• If you press and hold 8 for more than 1 second during  
playback, nine still pictures also appear but they  
advance at normal playback speed (while the sound is  
muted).  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
NOTES  
• To return to normal playback.  
To zoom in or out pictures [ZOOM]  
Press ENTER.  
• The zoom information on the screen will disappear if  
you do not operate the zoom function for 5 seconds.  
• While zoomed, the picture may look coarse.  
Available :  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
To adjust the picture character [VFP]  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
Available :  
ENTER  
5//2/3  
The VFP (Video Fine Processor) function allows you to  
adjust the picture character according to the type of  
programming, picture tone or personal preferences.  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW-  
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
TV  
DVD  
DIGEST ANGLE  
ZOOM  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
ZOOM +/–  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
RM-SXV012E  
REMOTE CONTROL  
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
During playback or while paused  
ENTER  
5//2/3  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
1 Press ZOOM + or –.  
SELECT  
STROBE  
Pressing ZOOM + causes the unit to zoom in on  
the image, and pressing ZOOM – causes the unit to  
zoom out.  
SLOW-  
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
VFP - PROGRESSIVE  
SCAN  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
Each time you press ZOOM +, the magnification is  
doubled (up to 1024 times).  
Each time you press ZOOM –, the magnification is  
halved (down to 1/8 times).  
RM-SXV012E  
REMOTE CONTROL  
During playback  
1 Press VFP - PROGRESSIVE SCAN.  
The VFP mode selection window appears on the  
TV screen.  
2 Use 2/3 to select the desired preset.  
Each time you press the button, the VFP mode  
changes as follows.  
ZOOM x 4  
Set the video type most suitable to the current  
program or the room conditions.  
Selected preset  
NORMAL  
USER  
1
CINEMA  
USER 1  
USER 2  
GAMMA  
+
+
4
4
At the top left of the screen, the information for the  
current magnification appears for 5 seconds. While  
zoomed in, an indication of the zoomed image  
position also is displayed. The next step can be  
used to move the image position.  
BRIGHTNESS  
CONTRAST  
SATURATION  
TINT  
+13  
+13  
+13  
SHARPNESS  
+
+
4
2
Y
DELAY  
Parameter  
2 Use 5//2/3 to move the zoomed position.  
If no button pressed for 5 seconds, the information  
for the current magnification disappears.  
To display the information, press ZOOM +/– or  
5//2/3 again.  
[NORMAL] is suitable for watching TV in a general  
room. [CINEMA] is suitable for watching a movie  
software in a room with suppressed light.  
They are factory presets and you cannot change  
parameters for them.  
ZOOM x 4  
If you select [USER 1] or [USER 2], you can adjust  
parameters that affect the picture character and  
store the settings as a user preset. See the next  
step.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
3 To define a user setting, select a parameter to  
be edited using 5/from the following.  
To simulate surround sound  
[3D PHONIC]  
• GAMMA  
Controls the brightness of a shaded portion  
without changing the brightness of the entire  
picture.  
This control is optimum when you adjust the  
pictures of software which generates subdued  
black in a bright room.  
Available :  
Using the 3D PHONIC function, you can get a simulated  
surround effect from your stereo system.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
The setting range is + 4 to – 4.  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
• BRIGHTNESS  
Controls the brightness of the screen.  
The setting range is +16 to – 16.  
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
• CONTRAST  
+
VOL-  
VOL+  
Controls the contrast of the screen.  
The setting range is +16 to – 16.  
ENTER  
5//2/3  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
• SATURATION  
Controls the color depth of the screen.  
The setting range is +16 to – 16.  
SLOW-  
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
• TINT  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
3D PHONIC  
Controls the tint of the screen.  
Use the appearance of a natural skin tone as a  
guideline.  
RM-SXV012E  
REMOTE CONTROL  
The setting range is +16 to – 16.  
During playback  
• SHARPNESS  
Controls the sharpness of the screen.  
The setting range is + 3 to 0.  
1 Press 3D PHONIC.  
The 3D PHONIC window appears on the TV screen.  
• Y DELAY  
Controls the color gap of the screen.  
The setting range is + 2 to – 2.  
2 Select the desired mode by using 2/3.  
Each time you press the button, the 3D PHONIC  
mode changes as follows:  
4 Press ENTER.  
A window for setting parameters appears instead  
of the VFP mode selection window.  
ACTION  
DRAMA  
ACTION  
4
THEATER  
NONE  
SATURATION  
4
Selected effect mode  
Selected parameter  
• ACTION  
5 Adjust the level of the parameter using 5/.  
Suitable for action movies and sports programs  
in which the sound source moves.  
The higher value enhances the effect.  
• DRAMA  
Natural and warm sound. You can enjoy movies  
in a relaxed mood.  
6 Press ENTER.  
The parameter is set and the VFP mode selection  
window appears again.  
• THEATER  
You can enjoy sound effects like in a major  
theater in Hollywood.  
Repeat steps 3 to 6 if you want to set other  
parameters.  
NOTES  
• The number of setting steps varies for different  
parameters.  
• To dismiss the VFP mode selection window:  
Press VFP - PROGRESSIVE SCAN.  
• The window for VFP mode selection and parameter  
setting disappears if no operation is made for about 10  
seconds.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
3 Press 5/to adjust the effect level.  
You can set the effect level from "1" to "5."  
The higher value enhances the effect.  
Checking the sampling  
frequency and bit rate  
Available :  
You can check the sampling frequency and bit rate of  
digital audio during playback.  
ACTION  
4
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
Effect level  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
NOTES  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
• To dismiss the 3D PHONIC window:  
Press 3D PHONIC.  
CH  
+
VOL-  
VOL+  
ENTER  
• The 3D PHONIC window disappears if no operation is  
made for about 10 seconds.  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
• The 3D PHONIC function works correctly only when  
playing back a DVD VIDEO disc recorded with Dolby  
Digital. Pressing the 3D PHONIC button will have no  
effect with other content.  
• When playing back a DVD VIDEO disc recorded with  
Dolby Digital that does not contain the rear signal, you  
can change the 3D PHONIC setting, but you will not be  
able to achieve a correct 3D effect.  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
AUDIO - fs/Rate  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
• The 3D PHONIC function does not affect the Dolby  
Digital bitstream signal from the DIGITAL OUT jack.  
• When the 3D PHONIC function is active, the [ANALOG  
OUT] and [D. RANGE COMPRESSION] settings in the  
[AUDIO] setting display are disabled.  
During playback  
1 Press and hold down AUDIO - fs/Rate for a  
few seconds.  
The sampling frequency and bit rate of the current  
digital audio are shown in the display window  
temporarily. When the audio is recorded using a  
surround audio format, the sampling frequency  
and bit rate are shown for the front speakers.  
(Example)  
Bit rate  
Sampling frequency  
The sampling frequencies indicated are as follows:  
44.1, 48, 88.2, 96, 176.4, and 192 (kHz). Note that  
any figure below the first decimal place is omitted  
in the display window.  
NOTE  
• With some discs, [NO INFO.] may appear instead of the  
sampling frequency and bit rate.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Basic operation procedure  
Menu bar functions  
This section describes the functions you can perform via  
the menu bar.  
TV  
DVD  
STANDBY/ON  
The available menu bar functions differ depending on  
the disc type.  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
To bring up the menu bar  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
2/3  
VOL-  
VOL+  
CLOSE  
ENTER  
TV1  
1
TV2  
2
TV3  
3
ENTER  
CH  
-
TV4  
4
TV5  
5
TV6  
6
PREVIOUS  
CLEAR  
NEXT  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
SELECT  
STROBE  
TV0  
0
MUTING  
+10  
SLOW-  
SLOW+  
VFP  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
REPEAT SUB TITLE AUDIO  
+
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
VOL-  
VOL+  
DIGEST ANGLE  
ENTER  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
CH  
-
ON SCREEN  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
RM-SXV012E  
REMOTE CONTROL  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
1 Use 2/3 to select the icon you want to work  
with.  
RM-SXV012E  
REMOTE CONTROL  
The selected icon is pointed to by  
.
When a disc is inserted  
2 Press ENTER.  
With many icons, an appropriate pull-down  
window appears, however, there are some  
exceptions.  
1 Press ON SCREEN.  
A status bar for the type of disc loaded will appear  
on the TV screen.  
• See the following pages for details about each  
function.  
See page 25 about the status bar.  
• Note that some functions are not available  
during playback. (You cannot move to the  
associated icon when it is not available.)  
(Example of the status bar for DVD VIDEO)  
TITLE 33 CHAP 33 TOTAL 1:25:58  
8.5Mbps  
NOTES  
2 Press ON SCREEN again.  
• When appears on the TV screen:  
You cannot use the selected function because of disc  
contents.  
• A mark or text on the menu icon for the function or  
mode currently selected is shown in blue.  
A menu bar for the type of disc loaded will appear  
together with the status bar. The menu bar  
includes some icons which indicate their functions.  
(for DVD AUDIO)  
GROUP 3 TRACK 33 TOTAL 1:25:58  
PROG. RND. 1/3 PAGE 32/32  
8.5Mbps  
OFF  
TRACK  
(for DVD VIDEO)  
TITLE 33 CHAP 33 TOTAL 1:25:58  
8.5Mbps  
OFF  
CHAP.  
1/3  
1/5  
1/3  
(for SVCD)  
TRACK 33 TIME  
25:58  
OFF  
PROG. RND.  
PROG. RND.  
PROG. RND.  
ST1  
-/4  
(for Video CD)  
TRACK 33 TIME  
25:58  
25:58  
OFF  
ST  
(for Audio CD)  
TRACK 33 TIME  
OFF  
NOTE  
• To dismiss the menu bar (and status bar):  
Press ON SCREEN.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Menu bar functions for DVD AUDIO  
The following table shows the menu bar  
functions available for DVD AUDIO.  
Note that, in the description of the  
operation column, we assume the  
associated icon is selected.  
GROUP 3 TRACK 33 TOTAL 1:25:58  
PROG. RND. 1/3 PAGE 32/32  
8.5Mbps  
OFF  
TRACK  
Menu icons  
2
3
4
6
7
8
1
5
Selected Icon  
Operation  
Note  
Press ENTER to select the time mode among the  
following.  
• If the disc has only one group and  
one track, [TOTAL] and [TIME]  
show the same value.  
1
Time mode selection  
(During playback only)  
Selects the time mode shown in  
the display window on the front  
panel and in the status bar.  
TIME \ REM \ TOTAL \ T.REM \ Return to initial  
• TIME:  
• REM:  
Current track elapsed time  
Current track remaining time  
• TOTAL: Current group elapsed time  
• T.REM: Current group remaining time  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select the repeat mode among the  
followings.  
TRACK j GROUP j A-B j OFF  
• TRACK: Current track repeat  
• GROUP: Current group repeat  
• If you select [OFF] during repeat  
playback, the unit continues  
playback without repeating.  
2
Repeat mode  
(During playback only)  
Select the repeat mode.  
• For the subsequent operations for  
the A-B repeat, see page 35.  
• A-B:  
Repeats a desired part (A-B repeat)  
3 Press ENTER to make the selected repeat function  
active.  
(See pages 34 to 35 for details about repeat function.)  
1 Press ENTER to open the pull-down window.  
2 Use numeric buttons to enter a desired time.  
3 Press ENTER to play back from the specified time.  
(See page 29 for details about time search function.)  
3
Time search  
Specifies the elapsed time from  
the beginning of the current  
group, from which the unit starts  
playback.  
1 Press ENTER to open the pull-down window.  
2 Use numeric buttons to enter a desired track number.  
• For example of entering "12," press "1" then "2."  
3 Press ENTER to play back from the specified track.  
• When the track number is incorrect:  
• The "10" and "+10" buttons are  
not used in this function.  
TRACK  
4
Track search  
(During playback only)  
Specifies a desired track to be  
played back from.  
• You can also locate a desired track  
directly by specifying the track  
number using the numeric buttons  
during playback. See page 24.  
Overwrite the incorrect number with the correct  
number.  
1 Press ENTER to bring up the program table.  
2 Specify tracks in the desired order using the numeric  
buttons.  
3 Press 3 to start program playback.  
(See page 32 for details about program playback.)  
PROG.  
5
Program  
(While stopped only)  
Specifies the playback order of  
tracks.  
1 Press ENTER to activate random playback.  
(See page 34 for details about random playback.)  
RND.  
6
Random  
(While stopped only)  
Activates random playback.  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired audio language or sound.  
Example:  
1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH  
3 Press ENTER to play back with the selected audio.  
(See page 37 for details about audio selection.)  
7
Audio selection  
(During playback only)  
Selects the audio language or  
sound.  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired page number.  
3 Press ENTER to play back with the selected page.  
(See page 31 for details about page selection.)  
PAGE  
8
Page selection  
(During playback only)  
Selects the page.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Menu bar functions for DVD VIDEO  
The following table shows the menu bar  
functions available for DVD VIDEO.  
Note that, in the description of the  
operation column, we assume the  
associated icon is selected.  
TITLE 33 CHAP 33 TOTAL 1:25:58  
1/3 1/5 1/3  
8.5Mbps  
OFF  
CHAP.  
Menu icons  
2
3
4
6
7
1
5
Selected Icon  
Operation  
Note  
Press ENTER to select the time mode from the  
following.  
TOTAL \ T.REM \ TIME \ REM \ Return to initial  
• TOTAL: Current title elapsed time  
• If a disc has only one title and one  
chapter, [TOTAL] and [TIME] show  
the same value.  
1
Time mode selection  
(During playback only)  
Selects the time mode shown in  
the display window on the front  
panel and in the status bar.  
• T.REM:  
• TIME:  
• REM:  
Current title remaining time  
Current chapter elapsed time  
Current chapter remaining time  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select the repeat mode from the  
following.  
CHAPTER j TITLE j A-B j OFF  
• CHAPTER:Current chapter repeat  
• If you select [OFF] during repeat  
playback, the unit continues  
playback without repeating.  
2
Repeat mode  
(During playback only)  
Selects the repeat mode.  
• For information on subsequent  
operations for A-B repeat, see  
page 35.  
• TITLE:  
• A-B:  
Current title repeat  
Repeats a desired part (A-B repeat)  
3 Press ENTER to make the selected repeat function  
active.  
(See pages 34 and 35 for details about repeat  
function.)  
1 Press ENTER to open the pull-down window.  
2 Use numeric buttons to enter a desired time.  
3 Press ENTER to begin playback from the specified  
time.  
3
Time search  
Specifies a time from the  
beginning of the current title as  
the point from which to begin  
playback.  
(See page 29 for details about the time search.)  
1 Press ENTER to open the pull-down window.  
2 Use numeric buttons to enter a desired chapter  
number.  
• For example, to enter "12," press "1" then "2."  
3 Press ENTER to begin playback from the specified  
chapter.  
• When the chapter number is incorrect:  
Overwrite the incorrect number with the correct  
number.  
• The "10" and "+10" buttons are  
not used in this function.  
CHAP.  
4
Chapter search  
(During playback only)  
Specifies a desired chapter to be  
playedback from.  
• You can also locate a desired  
chapter directly by specifying the  
chapter number using the numeric  
buttons during playback. See page  
24.  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired audio language or sound  
track.  
• For DVD VIDEO, the selected  
language may be abbreviated on  
the TV screen. See "Table of  
languages and their  
5
Audio selection  
(During playback only)  
Selects the audio language or  
sound track.  
Example:  
1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH  
3 Press ENTER to begin playback with the selected  
audio.  
abbreviations" on page 58.  
(See page 37 for details about audio selection.)  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired subtitle language.  
Example:  
1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH j  
-/3 OFF  
6
Subtitle selection  
(During playback only)  
Selects the subtitle language.  
3 Press ENTER to begin playback with the selected  
subtitle.  
(See page 36 for details about subtitle selection.)  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a scene angle.  
Example:  
1/3 j 2/3 j 3/3  
3 Press ENTER to begin playback with the selected  
scene angle.  
7
Angle selection  
(During playback only)  
Selects a desired scene angle in  
a multi-angle part.  
(See page 38 for details about angle selection).  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Menu bar functions for SVCD/Video CD/Audio CD  
The following table shows the menu bar  
functions available for SVCD/Video CD/  
Audio CD.  
Note that, in the description of the  
operation column, we assume the  
associated icon is selected.  
TRACK 33 TIME  
ST1  
-/4  
25:58  
25:58  
25:58  
OFF  
PROG. RND.  
Menu icons  
2
3
3
3
4
5
6
7
1
1
1
TRACK 33 TIME  
OFF  
PROG. RND.  
ST  
Menu icons  
Menu icons  
Operation  
2
4
5
6
TRACK 33 TIME  
OFF  
PROG. RND.  
2
4
5
Selected Icon  
Note  
Press ENTER to select the time mode among the  
followings.  
• When you have selected [REM]  
and the disc is stopped, you can  
change the track by pressing 4  
or ¢.  
1
Time mode selection  
TIME \ REM \ TOTAL \ T.REM \ Return to initial  
Selects the time mode shown in  
the display window on the front  
panel and in the status bar.  
• TIME:  
• REM:  
Current track elapsed time  
Current track remaining time  
• TOTAL: Disc elapsed time  
• T.REM: Disc remaining time  
• While the disc is stopped, [REM]  
shows the total time of the current  
track, and [T.REM] shows the total  
time of the disc.  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select the repeat mode from the  
following.  
OFF j TRACK j ALL j A-B j OFF  
• TRACK: Current track repeat  
• If you select [OFF] during repeat  
playback, the unit continues  
playback without repeating.  
2
Repeat mode  
Selects the repeat mode.  
• For information on subsequent  
operations for A-B repeat, see  
page 35.  
• ALL:  
• A-B:  
All track repeat  
Repeats a desired part (A-B repeat)  
3 Press ENTER to make the selected repeat function  
active.  
(See pages 34 and 35 for details about repeat  
function.)  
1 Press ENTER to open the pull-down window.  
2 Use numeric buttons to enter a desired time.  
3 Press ENTER to begin playback from the specified  
time.  
• This function cannot be used  
during program playback.  
3
Time search  
(Except during SVCD/Video CD  
playback with PBC)  
Specifies a time from the  
beginning of the current disc as  
the point from which to begin  
playback.  
(See page 29 for details about the time search.)  
1 Press ENTER to bring up the program table.  
2 Specify tracks in the desired order using the numeric  
buttons.  
3 Press 3 to start program playback.  
(See page 32 for details about the program.)  
PROG.  
4
Program  
(While stopped only)  
Specifies the playback order of  
tracks.  
1 Press ENTER to activate random playback.  
(See page 34 for details about random.)  
RND.  
5
Random  
(While stopped only)  
Activates random playback.  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired audio channel(s).  
3 Press ENTER to playback with the selected audio  
channel(s).  
6
Audio selection  
(During SVCD/Video CD  
playback only)  
Selects the audio channel(s).  
(See page 37 for details about audio selection.)  
1 Press ENTER to open the pull-down window.  
2 Use 5/to select a desired subtitle.  
3 Press ENTER to begin playback with the selected  
subtitle.  
7
Subtitle selection  
(During SVCD playback only)  
Selects the subtitle.  
(See page 36 for details about subtitle selection.)  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
The unit can play back MP3 files on a personally  
recorded CD-R/RW disc or commercial CD. We refer to a  
disc that contains MP3 file as an "MP3 disc" in this  
manual.  
Though functions available with MP3 discs are limited,  
operations for the available functions are similar to those  
for Audio CD discs.  
Note that if a disc contains both of MP3 and JPEG files,  
you can only play back files of the type selected by the  
MP3/JPEG setting in the PICTURE preference display  
(see page 59).  
NOTES  
• The unit does not support "packet writing" discs.  
• Some tracks on an MP3 disc are skipped and may not  
be played back normally because of the disc  
configuration or characteristics determined by the  
writing (encoding) software and hardware used for  
recording. Such symptoms may occur regardless of  
whether using a disc you recorded or using a  
commercially available disc.  
• The unit does not support the ID3 tag.  
• If the disc is recorded with multiple sessions, the unit  
supports up to five sessions.  
• Some discs may not play due to disc characteristics or  
recording conditions.  
• Programmed and random playback functions do not  
What is MP3?  
"MP3" stands for "MPEG Audio Layer-3," and is a part  
of the MPEG standard. It can store high quality stereo  
audio using very little space by only saving the  
audible sounds and discarding the sounds your ears  
won’t pick up. A CD can store up to around 10 hours  
of MP3 audio, which is nearly 10 times as much as an  
Audio CD.  
work with MP3 discs.  
• The unit only can play back Tracks with the following  
file extensions; ".MP3," ".Mp3," ".mp3" and ".mP3."  
• Time required for reading the disc contents may vary  
for defferent discs, depending on the numbers of  
Groups (folders) and Tracks (files) recorded, etc.  
• While an MP3 disc is loaded, you cannot bring up any  
preference display. (See page 57.)  
NOTE  
Make sure that the TV - DVD switch on  
TV  
DVD  
the remote control unit is set to "DVD"  
when using the 5//2/3 and numeric  
buttons for controlling the unit.  
Operations  
Basic operations  
About MP3 discs  
Available :  
On an MP3 disc, each song is recorded as a file. Files are  
sometimes grouped into folders by artists, album,  
category, etc. Folders can exist within other folders,  
creating hierarchical layers of folders. If you are familiar  
with personal computers, the hierarchical file and folder  
structure of an MP3 disc will be familiar to you as well.  
This unit simplifies the hierarchical structure of a disc  
and manages files and folders using "Tracks" and  
"Groups," in the following manner.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
ENTER  
Basic control  
buttons  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
• Each file is regarded as a Track.  
• A folder which has one or more files (Tracks) is  
regarded as a Group.  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
• A folder which does not directly contain any files is  
ignored.  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
• Files which do not belong to any folder are grouped  
into "Group 1."  
RM-SXV012E  
REMOTE CONTROL  
• The unit recognizes up to 150 Tracks per Group, and  
up to 99 Groups per disc. It ignores those exceeding  
the maximum numbers and cannot play them back. If  
there are files other than MP3 files, they also count  
against the 150-file total.  
The following table shows the basic functions of the  
basic control buttons.  
Button  
Functions  
Group 1  
Group 2  
Starts playback while stopped.  
ENTER  
Starts playback while stopped or paused.  
Stops playback.  
3
7
8
up to 99 Groups  
per disc  
Track 1  
Group 1’  
up to 150 Tracks per Group  
Pauses playback.  
Skips back or forward a Track in the  
Group* during playback.  
Selects the previous or next Track in the  
Group* while stopped.  
4/¢  
NOTES for making your own MP3 disc  
using a CD-R/CD-RW disc:  
• Select "ISO 9660" as the disc format.  
* You can skip a Track across a Group.  
• If you press 3 during playback, or press 7 to stop  
playback followed by 3, the unit starts playback from  
the beginning of the current track.  
• Finalize the disc after completing recording.  
• We recommend you record your material at a 44.1 kHz  
sampling rate, using the 128 kbps data transfer rate.  
• The 5/buttons work the same as the 4/¢  
buttons.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
3 Select a desired Track using 4/¢, then  
press ENTER or 3.  
NOTES  
• The current Group and Track numbers are shown on  
the display window in the following manner.  
or  
Use the numeric buttons to directly specify a  
desired Track number.  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
Examples:  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
Current Group  
number  
• You cannot advance or reverse playback of an MP3 disc  
rapidly.  
• You cannot see any other time information but the  
current track elapsed time.  
Current Track  
number  
Current track  
elapsed time  
The unit starts playback from the selected Track.  
In the MP3 CONTROL display and the display window on  
the front panel, you can see the current Group and Track  
numbers, as well as Track elapsed time.  
Selecting the desired Group and Track  
Available :  
When loading an MP3 disc, after the disc contents are  
read, the MP3 CONTROL display automatically appears  
on the TV screen.  
Current Track elapsed time  
MP3 CONTROL  
Group : 01 / 10  
Time : 00:03:08  
Track : 01 / 06 (Total 28)  
MP3 CONTROL  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.mp3  
german chamomile.mp3  
kiwi fruit.mp3  
orchard grass.mp3  
petunia.mp3  
north pole.mp3  
Group : 01 / 10  
Track : 01 / 06 (Total 28)  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.mp3  
german chamomile.mp3  
kiwi fruit.mp3  
orchard grass.mp3  
petunia.mp3  
north pole.mp3  
Group column  
Track column of  
the current Group  
Selected Track  
You can specify the desired Group/Track from the  
display using the following procedure.  
Hint  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
• You can also select a desired Track by pressing 3 to move  
DVD  
the black bar to the right (Track) column then using 5/.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
NOTES  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
• Up to 32 characters are displayed as a Group or Track  
name on the MP3 CONTROL display.  
CH  
+
VOL-  
VOL+  
• If a MP3 file name includes any 2-byte character, the  
unit may not show the file name correctly.  
• Only MP3 files are shown on the MP3 CONTROL  
display.  
• The order of Groups/Tracks shown in the MP3  
CONTROL display may differ from the order shown on  
your personal computer when you set the disc on your  
computer.  
ENTER  
5//2/3  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
4/¢  
SLOW  
-
SLOW+  
VFP  
3
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
When the MP3 CONTROL display is shown.  
1 Make sure that the black (cursor) bar is in the  
left (Group) column.  
If it is in the right column, press 2 to move it to the  
left column.  
2 Move the bar to a desired Group using 5/.  
On the right column, Tracks in the selected Group  
are shown.  
When selecting a Group, Track 1 is initially  
selected (highlighted).  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
Direct selection  
Repeat playback  
Available :  
Available :  
You can select a desired Group directly by specifying the  
Group number.  
You can repeat playback of the current Track, current  
Group or all MP3 files on the disc.  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
STANDBY/ON  
TV  
TV  
DVD  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
CH  
+
TITLE/GROUP  
VOL  
-
VOL+  
VOL-  
VOL+  
ENTER  
ENTER  
CH  
-
CH  
-
PREVIOUS  
CLEAR  
NEXT  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
REPEAT SUB TITLE AUDIO  
REPEAT  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
RM-SXV012E  
REMOTE CONTROL  
During playback or while stopped  
During playback or while stopped  
1 Press REPEAT.  
1 Press TITLE/GROUP.  
Each time you press REPEAT, the repeat mode  
changes as follows. You can see the current mode  
via the display window as well as the MP3  
CONTROL display.  
[--] is shown in the Group display area of the  
display window.  
(Front panel display window example)  
If you press REPEAT while stopped, you need to  
press ENTER or 3 to start repeat playback.  
MP3 CONTROL  
display  
Display  
Window  
Function  
Group display area  
Current track number  
REPEAT 1  
REPEAT  
REPEAT  
Repeats the current  
Track.  
REPEAT TRACK  
REPEAT GROUP  
REPEAT ALL  
2 Use the numeric buttons to specify a desired  
Group number.  
Repeats all Tracks in  
the current Group.  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
Repeats all Tracks  
on the disc.  
Examples:  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
The repeat mode is  
off.  
No indication  
(TV screen)  
Selected repeat mode  
Specify the Group number within several seconds  
after pressing TITLE/GROUP (i.e. while the display  
window shows [--] for the Group number, instead  
of the current Group number).  
The unit starts playback from Track 1 of the  
selected Group.  
MP3 CONTROL  
REPEAT TRACK  
Group : 01 / 10  
Track : 01 / 06 (Total 28)  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.mp3  
german chamomile.mp3  
kiwi fruit.mp3  
orchard grass.mp3  
petunia.mp3  
north pole.mp3  
3 Use the numeric buttons to specify a desired  
Track number.  
The unit starts playback from the specified Track.  
You can also use 4/¢ or 5/to specify a track,  
instead of the numeric buttons.  
(Display window)  
Repeat mode indicator  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
• To stop repeat playback  
Press 7 . Note that the repeat mode remains active.  
• To quit repeat playback  
During playback, press REPEAT until no repeat icon is  
shown on the display window.  
While stopped, press REPEAT until repeat mode  
indication on the MP3 CONTROL display goes off.  
Checking the sampling frequency and  
bit rate  
Available :  
You can check the sampling frequency and bit rate of  
digital audio during playback.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
AUDIO - fs/Rate  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
During playback  
1 Press and hold down AUDIO - fs/Rate for a  
few seconds.  
The sampling frequency and bit rate of the current  
digital audio are shown in the display window  
temporarily.  
(Example)  
Bit rate  
Sampling frequency  
Note that any figure below the first decimal place  
is omitted in the display window.  
NOTE  
• With some discs, [NO INFO.] may appear instead of the  
sampling frequency and bit rate.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
The unit can play back JPEG files on a personally  
recorded CD-R/RW disc. We refer to a disc that contains  
JPEG files as a "JPEG disc" in this manual.  
Note that if a disc contains both of MP3 and JPEG files,  
you can only play back files of the type selected by the  
MP3/JPEG setting in the PICTURE preference display  
(see page 59).  
NOTES for making your own JPEG disc  
using a CD-R/CD-RW disc:  
• Select "ISO 9660" as the disc format.  
• Finalize the disc after completing recording.  
• We recommend you record your material at a 640 x 480  
pixel resolution.  
• This unit supports only the baseline JPEG format.  
Therefore, it cannot display pictures saved in the  
progressive or lossless formats. If a JPEG disc contains  
JPEG files of non-baseline type, the unit recognizes  
those files as JPEG files. The JPEG CONTROL display  
and the display window show the information of the  
contents (filename, file number, etc.), but you cannot  
show the still pictures of those files (the TV screen  
appears only in black).  
What is JPEG?  
"JPEG" is an abbreviation for the Joint Photographic  
Experts Group. "JPEG" is used to refer to an image file  
format that utilizes a certain compression technique.  
There are three sub-types of the JPEG format as  
follows.  
• baseline JPEG: used for digital cameras, the web,  
etc.  
• progressive JPEG: used for the web  
• lossless JPEG: an old type, rarely used now  
The unit supports only the baseline JPEG format;  
Therefore, it cannot display pictures saved in the  
progressive or lossless formats. If a JPEG disc  
contains JPEG files of non-baseline type, the unit  
recognizes those files as JPEG files, the JPEG  
CONTROL display and the display window shows the  
information of the contents (filename, file number,  
etc.), but you cannot show the still pictures of those  
files (the TV screen appears only in black).  
NOTES  
• The unit does not support "packet writing" discs.  
• If the disc is recorded with multiple sessions, the unit  
supports up to five sessions.  
• The unit may not be able to read some discs, or may  
take a long time to display a picture on the disc, due to  
disc characteristics or recording conditions.  
• Programmed and random playback functions do not  
work with JPEG discs.  
• The screen saver function will be activated if the same  
picture is displayed for more than 5 minutes except  
during slide show playback (see page 54).  
• The unit only can play back files with the following file  
extensions; ".jpg," ".jpeg," ".JPG," ".JPEG" and any  
other combination of upper case and lower case letters  
(such as ".Jpg").  
• If a JPEG file name includes any 2-byte character, the  
unit may not show the file name correctly.  
• If a picture has been saved at greater than 640 x 480  
pixel resolution, it may take some time to display the  
picture.  
• The unit will not accept any commands (stopping  
playback, zooming into or out of an image, etc.) while  
in the process of displaying a picture.  
• The time required to read the disc contents may vary  
for different discs, depending on the numbers of  
Groups (folders) and files recorded, etc.  
• If you attempt to display a non-baseline JPEG image:  
The unit will not be able to display the picture (the TV  
screen will be black). Other operations (stopping  
display, selecting a file, etc.) will be possible, but may  
take a long time.  
NOTE  
Make sure that the TV - DVD switch on  
TV  
DVD  
the remote control unit is set to "DVD"  
when using the 5//2/3, numeric  
buttons for controlling the unit.  
About JPEG discs  
On a JPEG disc, each picture is recorded as a file. Files  
are sometimes grouped into folders by category, etc.  
Folders can exist within other folders, creating  
hierarchical layers of folders. If you are familiar with  
personal computers, the hierarchical file and folder  
structure of a JPEG disc will be familiar to you as well.  
This unit simplifies the hierarchical structure of a disc  
and manages folders using "Groups," in the following  
manner.  
• While a JPEG disc is loaded, you cannot bring up any  
preference display (see page 57).  
• This unit does not support pixel size picture of more  
than 2400 pixels. Make sure that the picture pixel size is  
2400 pixels or less.  
• A folder which has one or more files is regarded as a  
Group.  
• A folder which does not directly contain any files is  
ignored.  
• Files which do not belong to any folder are grouped  
into "Group 1."  
• The unit recognizes up to 150 files per Group, and up  
to 99 Groups per disc. It ignores those exceeding the  
maximum numbers and cannot display them. If there  
are files other than JPEG files, they also count against  
the 150-file total.  
Group 1  
Group 2  
up to 99 Groups  
per disc  
File 1  
Group 1’  
up to 150 files per directory  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
4 Press ENTER.  
The selected file (still picture) is shown on the TV.  
In the display window, you can see the current  
Group and File numbers.  
Basic operations  
To see a desired picture  
JPEG CONTROL  
Group : 01 / 10  
File : 01 / 06 (Total 28)  
JPEG  
Available :  
spring  
sumer  
fall  
begonia.jpg  
german chamomile.jpg  
kiwi fruit.jpg  
When loading a JPEG disc, after the disc contents are  
read, the JPEG CONTROL display automatically appears  
on the TV screen.  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
orchard grass.jpg  
petunia.jpg  
north pole.jpg  
JPEG CONTROL  
Group : 01 / 10  
File : 01 / 06 (Total 28)  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.jpg  
german chamomile.jpg  
kiwi fruit.jpg  
orchard grass.jpg  
petunia.jpg  
north pole.jpg  
Group  
column  
File column of the  
current Group  
Selected  
File  
Hints  
• You can also select a desired file by pressing 3 to move the  
black bar to the right (File) column then using 5/.  
• To return the black bar to the Group column, press 2.  
You can select a desired file for playback via this display.  
TV  
DVD  
• To display another picture:  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
Use 4/¢ or 5/to select the desired picture. You  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
can select a picture in another Group.  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
• To dismiss the picture:  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
Press 7 or MENU.  
CH  
+
The TV screen returns to showing the JPEG CONTROL  
display.  
VOL  
-
VOL+  
ENTER  
5//2/3  
4/¢  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
NOTES  
SLOW  
-
SLOW+  
VFP  
• Up to 32 character s are displayed as a group or file  
name on the JPEG CONTROL display.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
• The current Group and File number are also shown on  
the display window in the following manner.  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
When the JPEG CONTROL display is shown  
Current Group  
number  
Current File  
number  
1 Make sure that the black (cursor) bar is in the  
• Only JPEG files are shown on the display window.  
left (Group) column.  
If it is in the right column, press 2 to move it to the  
left column.  
2 Move the bar to a desired Group using 5/.  
On the right column, files in the selected Group are  
shown.  
When selecting a Group, File 1 is initially selected  
(highlighted).  
3 Select a desired file using 4/¢.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
NOTES  
To zoom in or out the pictures [ZOOM]  
• You can zoom into or out of a picture in slide show  
mode if the show is paused (see next page).  
• To return to a normal screen:  
Press ENTER.  
JPEG  
Available :  
• The zoom information on the screen will disappear if  
you do not operate the zoom function for 5 seconds.  
• The image may look coarse when a zoomed image is  
displayed.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
ENTER  
5//2/3  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
ZOOM +/–  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
While a JPEG image is displayed on the TV screen  
1 Press ZOOM + or –.  
Pressing ZOOM + causes the unit to zoom in on  
the image, and pressing ZOOM – causes the unit to  
zoom out.  
Each time you press ZOOM +, the magnification is  
doubled (up to 1024 times).  
Each time you press ZOOM –, the magnification is  
halved (down to 1/8 times).  
ZOOM x 4  
At the top left of the screen, the information for the  
current magnification appears for 5 seconds. While  
zoomed in, an indication of the zoomed image  
position is also displayed. The next step can be  
used to move the image position.  
2 Use 5//2/3 to move the zoomed position.  
If no button pressed for 5 seconds, the information  
for the current magnification disappears.  
To display the information, press ZOOM +/– or 5/  
/2/3 again.  
ZOOM x 4  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
Selecting the start point of the slide  
show  
To see pictures  
continuously  
JPEG  
[slide show mode]  
Available :  
You can see Files (still pictures) one after another  
automatically in the slide show mode.  
In this mode, each File (still picture) is displayed for  
approximately 3 seconds. The next File will then be  
displayed.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
Numeric  
buttons  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TITLE/GROUP  
CH  
+
5/∞  
VOL-  
VOL+  
Playback features  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
4/¢  
JPEG  
SELECT  
STROBE  
Available :  
SLOW-  
SLOW+  
VFP  
3
REPEAT SUB TITLE AUDIO  
TV  
DVD  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DIGEST ANGLE  
DVD  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
RM-SXV012E  
REMOTE CONTROL  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
ENTER  
From the JPEG CONTROL display  
While the JPEG CONTROL display is shown  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
3
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
1 Make sure that the black (cursor) bar is in the  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
left (Group) column.  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
If it is in the right column, press 2 to move it to the  
left column.  
RM-SXV012E  
REMOTE CONTROL  
JPEG CONTROL  
Group : 01 / 10  
File : 01 / 06 (Total 28)  
After inserting a JPEG disc  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.jpg  
german chamomile.jpg  
kiwi fruit.jpg  
orchard grass.jpg  
petunia.jpg  
north pole.jpg  
1 Press 3.  
The slide show starts from the beginning of the  
disc.  
NOTES  
• To stop slide show playback (to dismiss the picture) in  
the middle of slide show playback:  
Press 7 or MENU.  
The TV screen returns to showing the JPEG CONTROL  
display.  
Pressing 3 resumes slide show playback from the last  
2 Move the bar to a desired Group using 5/.  
picture displayed.  
• To keep showing the current picture while in slide  
show mode:  
In the right column, files in the selected Group are  
shown.  
Press 8 or ENTER.  
When selecting a Group, File 1 is initially selected  
(highlighted).  
The picture does not change to the next picture.  
Pressing 3 resumes the slide show playback from the  
next picture.  
• If a black screen appears continuously in the slide show  
playback:  
3 Select a desired file using 4/¢.  
The File currently displayed may be non-baseline JPEG  
file. In this case, select a playable File (a baseline JPEG  
file) again (e.g., pressing 7 or MENU to open the JPEG  
CONTROL display, etc).  
4 Press 3.  
The slide show starts from the specified File.  
Note that it may take a long time to select another File.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
Direct selection  
During playback or while stopped  
NOTES  
• To stop slide show playback (to dismiss the picture) in  
the middle of slide show playback:  
Press 7 or MENU.  
1 Press TITLE/GROUP.  
The TV screen returns to showing the JPEG CONTROL  
display.  
[--] is shown in the Group display area of the  
display window.  
Pressing 3 resumes slide show playback from the last  
picture you displayed.  
• To keep showing the current picture while in slide  
show mode:  
(Front panel display window example)  
Press 8 or ENTER.  
The picture does not change to the next picture.  
Pressing 3 resumes the slide show playback from the  
next picture.  
• If a black screen appears continuously in the slide show  
playback:  
Group display  
area  
Current File  
number  
The file currently displayed may be non-baseline JPEG  
file. In this case, select a playable File (a baseline JPEG  
file) again (e.g., pressing 7 or MENU to open the JPEG  
CONTROL display, etc.).  
2 Use the numeric buttons to specify a desired  
Group number.  
• To select a number between 1 and 10:  
Press the corresponding button for the number.  
• To select a number higher than 10:  
Use the +10 button.  
Note that it may take a long time to select another File.  
Examples:  
To select 13: +10 3  
To select 34: +10 +10 +10 4  
To select 40: +10 +10 +10 10  
Specify the Group number within several seconds  
after pressing TITLE/GROUP (i.e. while the display  
window shows [--] for the Group number, instead  
of the current Group number).  
3 Use the numeric buttons to specify a desired  
file number.  
You can specify the file number according to the  
order in the JPEG CONTROL display. You must  
specify a file number within 5 seconds after  
carrying out step 2.  
The unit starts slide show playback from the  
specified File. If you do not specify a file number,  
the unit starts slide show playback from the first  
File in the Group.  
Hints  
• You can skip a File in the slide show by using 4/¢ or  
5/.  
• You can select a File in the current Group by using the  
numeric buttons.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG disc playback  
on the JPEG CONTROL display goes off.  
Repeat function  
JPEG  
Available :  
In the slide show mode, you can repeat playback of JPEG  
files in a Group or on the disc.  
VOL-  
VOL+  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW+  
SLOW-  
REPEAT SUB TITLE AUDIO  
VFP  
REPEAT  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
While the JPEG CONTROL display is shown  
1 Press REPEAT.  
Pressing REPEAT switch the repeat mode.  
If you press REPEAT while the JPEG CONTROL  
display is shown, you need to press 3 to start  
repeat playback.  
The selected mode is reflected by an icon  
displayed in the front panel display window, and  
by the mode name shown in the JPEG CONTROL  
display, as described below.  
JPEG  
CONTROL  
display  
Display  
Window  
Function  
All Files on the disc  
are repeated.  
REPEAT ALL  
REPEAT  
All Files in the  
current Group are  
repeated.  
REPEAT GROUP  
The repeat mode is  
off.  
No indication  
(TV Screen)  
Selected repeat mode  
JPEG CONTROL  
REPEAT GROUP  
Group : 01 / 10  
File : 01 / 06 (Total 28)  
spring  
sumer  
fall  
winter  
sea  
mountain  
camp  
picnic  
skiing  
flower  
begonia.jpg  
german chamomile.jpg  
kiwi fruit.jpg  
orchard grass.jpg  
petunia.jpg  
north pole.jpg  
(Display window)  
Repeat mode indicator  
• To stop repeat playback  
Press 7 . Note that the repeat mode remains active.  
• To quit repeat playback  
Press 7 or MENU while the JPEG CONTROL display is  
shown, press REPEAT until the repeat mode indication  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
NOTE  
How to set preferences  
Make sure that the TV - DVD switch on  
the remote control unit is set to "DVD"  
when using the 5//2/3 and numeric  
buttons for controlling the unit.  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Selecting preferences  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
ENTER  
This chapter refers to the settings which are already  
made when you purchase the unit. Read this section  
when you want to connect this machine to a wide-vision  
TV set, or when you want to otherwise change the  
settings according to your preferences and viewing  
environment.  
CH  
+
VOL  
-
VOL+  
ENTER  
5//2/3  
CH  
-
CHOICE  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
While stopped  
About the Preference display  
1 Press CHOICE.  
One of the Preference on-screen displays appears  
on the TV screen.  
The preference display consists of the LANGUAGE,  
PICTURE, AUDIO, SPK.SETTING and OTHERS setting  
displays, each having setting items.  
You can see four icons at the top right of the on-  
screen display for the settings.  
• LANGUAGE  
: Language menu  
: Picture menu  
LANGUAGE  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ENGLISH  
: Audio menu  
ON SCREEN LANGUAGE  
: Setting menu for speakers  
: Others menu (system setting)  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
2 Select the appropriate icon using 2/3.  
• PICTURE  
The appropriate display appears on the TV screen.  
PICTURE  
MONITOR TYPE  
4:3 LB  
AUTO  
ON  
STILL MODE  
SCREEN SAVER  
MP3/JPEG  
3 Move to select the item you want to edit  
MP3  
using 5/.  
The color of the selected item changes.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
4 Press ENTER.  
A pull-down menu appears over the selected item.  
• AUDIO  
AUDIO  
LANGUAGE  
DIGITAL AUDIO OUTPUT  
ANALOG OUT  
D. RANGE COMPRESSION  
STREAM/PCM  
MULTI CHANNEL  
AUTO  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ON SCREEN LANGUAGE  
ENGLISH  
ENGLISH  
FRENCH  
GERMAN  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
SELECT  
ENTER  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
• SPK.SETTING  
Selected item  
SPK.SETTING  
MODE  
5.1 CH.  
SIZE  
5 Press 5/to select from the options and  
DELAY  
LEVEL  
press ENTER.  
The selected option is set.  
• For details about each setting, see the following.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
NOTES  
• OTHERS  
• To dismiss a preference display:  
Press CHOICE.  
• While an MP3 or JPEG disc is loaded, you cannot bring  
up any preference display.  
• When a preference display is shown on a wide TV  
screen, the upper and lower parts of the TV picture  
sometimes may be cut off. If this happens, adjust the  
picture size control of the TV.  
OTHERS  
RESUME  
ON  
ON SCREEN GUIDE  
AUTO STANDBY  
ON  
OFF  
DVD1  
AV COMPULINK MODE  
PARENTAL LOCK  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
LANGUAGE menu  
This menu allows you to select the languages used for DVD AUDIO/DVD VIDEO playback,  
as well as the on-screen display language of the unit.  
LANGUAGE  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ENGLISH  
NOTE  
ON SCREEN LANGUAGE  
• During playback, you can bring up any menu of the preference displays; however, only [ON  
SCREEN LANGUAGE] can be set on the [LANGUAGE] menu.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Menu item  
Setting options  
Notes/examples  
MENU LANGUAGE  
You can select the default  
menu language to be  
displayed if it is contained on  
a DVD AUDIO/DVD VIDEO  
disc.  
ENGLISH j SPANISH j FRENCH j CHINESE j  
GERMAN j ITALIAN j JAPANESE j language  
code from AA to ZU  
• If the disc does not have a menu in  
the selected language, the disc’s  
default language will be used.  
• For details about language codes,  
see "Table of languages and their  
abbreviations" at the bottom of  
this page.  
AUDIO LANGUAGE  
You can select the default  
audio language to be played if  
it is contained on a DVD  
AUDIO/DVD VIDEO disc.  
SUBTITLE  
OFF j ENGLISH j SPANISH j FRENCH j  
CHINESE j GERMAN j ITALIAN j JAPANESE j  
language code from AA to ZU  
You can select the default  
subtitle language to be  
displayed if it is contained on  
a DVD AUDIO/DVD VIDEO  
disc.  
ON SCREEN LANGUAGE  
You can select the on-screen  
display language of the unit.  
ENGLISH j FRENCH j GERMAN  
English  
French  
German  
ON SCREEN LANGUAGE  
LANGUE D´ ECRAN  
ENGLISH  
FRANCAIS  
DEUTSCH  
BILDSCHIRMENÜ-SPRACHE  
• Some on-screen messages are  
shown in English regardless of the  
setting.  
• You cannot change the on-screen  
language shown on the MP3 and  
JPEG CONTROL displays.  
Table of languages and their abbreviations  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
Afar  
FA  
FI  
Persian  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
OM  
OR  
PA  
PL  
PS  
PT  
QU  
RM  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
(Afan) Oromo  
Oriya  
Panjabi  
SU  
SV  
SW  
TA  
TE  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Finnish  
Fiji  
Faroese  
Frisian  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance TI  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
TG  
TH  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
TK  
TL  
LV  
MG  
MI  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
Sangho  
Breton  
Catalan  
Corsican  
Czech  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
Somali  
Albanian  
Serbian  
Twi  
Ukrainian  
Urdu  
IE  
IK  
SK  
SL  
IN  
IS  
IW  
JI  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
Malay (MAY)  
Maltese  
Burmese  
Nauru  
Uzbek  
Welsh  
Danish  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Zulu  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
JW  
KA  
KK  
KL  
Javanese  
Georgian  
Kazakh  
Nepali  
Dutch  
Norwegian  
Occitan  
EO  
ET  
EU  
Siswati  
Sesotho  
Greenlandic  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
PICTURE menu  
This menu allows you to select options having to do with picture quality or the monitor  
screen.  
PICTURE  
MONITOR TYPE  
STILL MODE  
SCREEN SAVER  
MP3/JPEG  
4:3 LB  
AUTO  
ON  
MP3  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Menu item  
Setting options  
Notes/examples  
MONITOR TYPE  
• 16:9 NORMAL (Wide Television screen)  
Should be selected when you connect the unit to a  
wide-screen (16:9) TV whose aspect ratio is set to  
16:9 (the unit automatically adjusts the screen width  
of the output signal correctly when playing back a 4:3  
source).  
You can select the monitor  
type to match your TV when  
you playback DVD VIDEO  
discs recorded for wide-screen  
televisions.  
• 16:9 AUTO (Wide Television screen)  
Should be selected when you connect a wide-screen  
(16:9) TV to the unit.  
• If you play a 4:3 DVD VIDEO source  
using the [16:9 NORMAL] mode,  
the picture character changes  
slightly due to the process for  
converting the picture width.  
• 4:3 LB (Letter Box Conversion)  
Should be selected when you connect a normal (4:3)  
TV to the unit.  
When playing back a DVD VIDEO disc recorded in  
wide picture format, the picture is shown with black  
bars at the top and bottom.  
• 4:3 PS (Pan Scan Conversion)  
Should be selected when you connect a normal (4:3)  
TV to the unit.  
When playing back a DVD VIDEO disc recorded in  
wide picture format, the picture is zoomed to fill the  
screen vertically, and the left and right sides of the  
image are chopped off.  
• With some discs recorded in wide  
picture format, the picture will be  
shown in the 4:3 LB mode even if  
you select the 4:3 PS mode.  
STILL MODE  
• AUTO  
• Normally, set to [AUTO].  
This mode selects whether the  
content on the disc is  
The unit recognizes the picture type (film or video  
source) of the current disc.  
• When Progressive scanning mode  
is active, the PROGRESSIVE  
processed by field or by  
frame. If set to AUTO, the  
decision of how to process the  
content is made automatically,  
based on data and flags  
recorded on the disc.  
indicator is lit. Note that the color  
of indication changes depending  
on this setting, source type and the  
unit's status (see pages 9 and 10).  
• Some DVD VIDEO discs may not  
play correctly if AUTO is selected.  
If the picture is unclear or noisy  
with a particular DVD VIDEO disc,  
try changing the mode.  
• FIELD  
Suitable for playing back a video source disc.  
• FRAME  
Suitable for playing back a film source disc.  
SCREEN SAVER  
You can set the screen saver  
function ON or OFF.  
See page 19 for details about  
the screen saver function.  
• ON  
• The screen saver function does not  
work for still images during DVD  
AUDIO playback.  
The current picture gets dark.  
• OFF  
The screen saver function is off.  
MP3/JPEG  
• MP3  
• When a disc contains either only  
MP3 files or only JPEG files, the  
unit can play back the files  
The unit can play MP3 and  
JPEG files recorded on a CD-R/  
CD-RW disc. However, if a disc  
contains both MP3 and JPEG  
files, you can only play files of  
the type selected in this menu  
item.  
Only MP3 files can be played back if a disc contains  
both MP3 and JPEG files.  
regardless of the setting.  
• JPEG  
Only JPEG files can be played back if a disc contains  
both MP3 and JPEG files.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
AUDIO menu  
This menu allows you to select desired options concerning with audio sound.  
AUDIO  
DIGITAL AUDIO OUTPUT  
ANALOG OUT  
STREAM/PCM  
MULTI CHANNEL  
AUTO  
D. RANGE COMPRESSION  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Menu item  
Setting options  
Notes/examples  
DIGITAL AUDIO OUTPUT  
To connect the unit’s digital  
output to an external device  
equipped with a digital input,  
this item must be set correctly.  
See the table following for  
details about the relation  
between the setting and  
output signals.  
• PCM ONLY  
• When playing a DVD VIDEO or  
Audio CD disc with DTS, use a DTS  
decoder to get correct signals from  
your speakers.  
• With some DVD VIDEO discs that  
are not fully copy-protected, a 20  
or 24 bit digital signal may be  
output.  
• A signal recorded with the 88.2 kHz  
or higher sampling frequency  
cannot be output from the DIGITAL  
OUT jack, regardless of the setting  
(due to copy protection issues).  
Should be selected when you connect the DIGITAL  
OUT jack of the unit to the linear PCM digital input of  
other audio equipment.  
• DOLBY DIGITAL/PCM  
Should be selected when you connect the digital  
input of a Dolby Digital decoder or an amplifier with  
a built-in Dolby Digital decoder.  
When this option is selected, playing back a disc  
recorded by the DTS or MPEG Multichannel format  
outputs a linear PCM digital signal.  
• STREAM/PCM  
Should be selected when you connect the digital  
input of an amplifier with a built-in DTS, MPEG  
Multichannel or Dolby Digital decoder, or the stand-  
alone unit of such a decoder.  
Digital output signal chart  
Output  
Disc type  
PCM ONLY  
DOLBY DIGITAL/PCM  
STREAM/PCM  
DVD with 48/44.1 kHz, 16/20/24  
bit linear PCM  
48/44.1 kHz,16 bit, stereo linear PCM  
No output  
DVD with 192/176.4/96/88.2  
kHz, 16/22/24 bit linear PCM  
DVD with DTS  
48 kHz, 16 bit, stereo linear PCM  
48 kHz, 16 bit, stereo linear PCM  
48 kHz, 16 bit, stereo linear PCM  
44.1 kHz,16 bit, stereo linear PCM  
44.1 kHz, 16 bit, stereo linear PCM  
Linear PCM  
DTS bitstream  
DVD with Dolby Digital  
DVD with MPEG Multichannel  
Audio CD/Video CD/SVCD  
Audio CD with DTS  
Dolby Digital bitstream  
MPEG bitstream  
DTS bitstream  
CD-R/RW with MP3  
Menu item  
Setting options  
• 2-CH DOLBY SURROUND  
Should be selected when you enjoy multichannel  
surround audio by connecting the unit’s AUDIO OUT  
jacks to a surround decoder.  
Notes/examples  
ANALOG OUT  
• This function does not work when  
the 3D PHONIC function is  
activated (see page 41).  
To play back a DVD VIDEO  
disc recorded with surround  
multichannel audio correctly,  
this setting must be properly  
made according to your audio  
system.  
• [2-CH DOLBY SURROUND] and  
[2-CH STEREO] settings affect only  
the output signal from the AUDIO  
OUT jacks when playing back a  
DVD VIDEO disc recorded with  
surround multichannel audio.  
• Some DVD AUDIO discs prohibit  
the 2-channel down-mix. For such  
a disc, you cannot get the down-  
mixed signal even if you set  
• 2-CH STEREO  
Should be selected when you enjoy conventional 2-  
channel stereo audio by connecting the unit’s AUDIO  
OUT jacks to a stereo amplifier/receiver or television  
set, or when you duplicate audio of a DVD VIDEO  
disc recorded with surround audio to your MD,  
cassette, etc.  
• MULTI CHANNEL  
[ANALOG OUT] to [2-DOLBY  
SURROUND] or [2-CH STEREO].  
When you enjoy multichannel surround audio by  
connecting the unit’s 5.1-channel audio outputs to an  
amplifier equipped with 5.1-channel inputs.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
Menu item  
Setting options  
Notes/examples  
D. RANGE COMPRESSION  
This setting provides optimal  
audio quality for listening to  
DVD VIDEO discs recorded in  
Dolby Digital format, at low or  
middle volume.  
• AUTO  
• This function works only when  
playing back a disc recorded with  
Dolby Digital. The setting does not  
affect audio from other discs.  
• This function does not work when  
the 3D PHONIC function is  
Audio is played back with the dynamic range  
compressed  
except when playing a disc recorded with Dolby  
Digital 1- or 2-channel format.  
• ON  
activated (see page 41).  
Audio is always played back with the dynamic range  
compressed.  
SPK.SETTING menu  
This setting allows you to select desired options concerning with the speakers.  
SPK.SETTING  
MODE  
SIZE  
5.1 CH.  
DELAY  
LEVEL  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Menu item  
Setting options  
Notes/examples  
MODE  
• 5.1 CH.  
• When selecting [5.1 CH.], set  
[ANALOG OUT] to [MULTI  
CHANNEL] in the [AUDIO]  
preference display (see page 60).  
• The signal is always fed from the  
SUBWOOFER jack on the rear  
panel of the unit when  
You can select the speaker  
configuration type according  
to your speaker systems.  
Normally, set to [5.1 CH.].  
When you connect to a 5.1-channel amplifier and use  
the front, rear, center and sub-woofer speakers.  
• EXPERT  
When you want to make fine tuning to match your  
speakers. The SIZE, DELAY, and LEVEL setting items  
are available.  
"SUBWOOFER" is selected.  
• If you connect the unit’s digital  
output to an external Dolby Digital  
or DTS decoder (and set [DIGITAL  
AUDIO OUTPUT] to [STREAM/  
PCM] in the [AUDIO] preference  
display), the speaker settings  
shown left is not effective. Make  
the speaker settings of the external  
decoder properly.  
SIZE  
See page 63 for details about the speaker size  
setting.  
(SIZE display)  
You can set the speaker sizes  
according to your speakers.  
SIZE  
FRONT SPEAKER  
CENTER SPEAKER  
REAR SPEAKER  
BASS REDIRECT  
RETURN  
LARGE  
SMALL  
SMALL  
SUB WOOFER  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
• When playing back a disc with  
either [CENTER SPEAKER] or  
[REAR SPEAKER] set to [NONE],  
the audios from the center speaker  
or rear speakers are output from  
the front speakers.  
DELAY  
See page 64 for details about the speaker delay time  
setting.  
(DELAY display)  
You can set the speaker delay  
time according to your  
speakers.  
DELAY  
CENTER SPEAKER  
0.0m  
REAR SPEAKER  
RETURN  
1.5m  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
Menu item  
Setting options  
Notes/examples  
(LEVEL display)  
LEVEL  
See page 64 for details about the speaker output  
level setting.  
You can set the speaker  
output level according to your  
speakers.  
LEVEL  
FRONT SPEAKER  
CENTER SPEAKER  
REAR SPEAKER  
SUB WOOFER  
TEST TONE  
0dB  
0dB  
0dB  
0dB  
OFF  
RETURN  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
OTHERS menu  
This menu allows you to set various system options.  
OTHERS  
RESUME  
ON  
ON SCREEN GUIDE  
AUTO STANDBY  
AV COMPULINK MODE  
PARENTAL LOCK  
ON  
OFF  
DVD1  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Menu item  
Setting options  
Notes/examples  
RESUME  
You can select the resume  
playback mode.  
• ON  
• See page 21 for details about the  
resume playback function.  
The unit can resume playback of the disc from the  
position where play was last interrupted, if the disc is  
still in the tray.  
• OFF  
The resume function is not active.  
• DISC RESUME  
The unit can resume playback of the last 30 discs  
played. The unit retains a memory of the interrupt  
positions of the last 30 discs played, even though  
they have been removed from the tray.  
ON SCREEN GUIDE  
The unit can display "on-  
screen guide" icons or  
characters on the picture,  
which show what is  
happening to the disc or the  
unit.  
• ON  
• See page 19 for information about  
"on-screen guide" icons.  
• Examples of "on-screen guide"  
"On-screen guide" icons will be displayed.  
• OFF  
icons or characters:  
,
,
.
"On-screen guide" icons will not be displayed.  
AUTO STANDBY  
60 j 30 j OFF  
When the unit is stopped for  
more than 30 minutes or 60  
minutes, the unit enters  
standby mode automatically.  
AV COMPULINK MODE  
This item is provided for use  
in the future. Leave it as the  
default setting ([DVD 1]).  
PARENTAL LOCK  
See page 65 for details about the Parental Lock setting.  
(PARENTAL LOCK display)  
When this option is selected,  
pressing ENTER on the remote  
control unit brings up to the  
PARENTAL LOCK display  
shown following. This allows  
you to restrict children from  
playing DVD VIDEO discs.  
PARENTAL LOCK  
COUNTRY CODE  
GB  
SET LEVEL  
PASSWORD  
EXIT  
NONE  
_ _ _ _  
SELECT  
ENTER  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
4 Repeat steps 2 and 3 if you set other  
speakers.  
Making fine tuning for your  
speakers  
• To return to the [SPK.SETTING] page  
Use 5/to move to [RETURN] and press ENTER.  
You can make fine tuning to match your speaker system.  
This adjustment is available only when [ANALOG OUT]  
is set to [MULTI CHANNEL] in the [AUDIO] preference  
display and [MODE] is set to [EXPERT] in the [SPK.  
SETTING] preference display.  
NOTES  
• If you set the [FRONT SPEAKER] to [SMALL], you  
cannot set the other speakers to [LARGE].  
• When playing back a DVD AUDIO disc with either  
[CENTER SPEAKER] or [REAR SPEAKER] set to [NONE],  
their audio does not output from the front speakers.  
To set the speaker sizes  
You can set the speaker sizes according to your  
speakers.  
BASS REDIRECT function  
When you use the small speakers which do not fully  
reproduce the low-frequency range, you can boost up  
the low-frequency signal of the subwoofer or front  
speakers.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
1 Use 5/to select [BASS REDIRECT] and  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
press ENTER.  
5/∞  
VOL-  
VOL+  
ENTER  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
2 Use 5/to select [SUB WOOFER] or  
SELECT  
STROBE  
[FRONT L/R] and press ENTER.  
SLOW-  
SLOW+  
VFP  
SUB WOOFER: The low-frequency signal fed  
from the subwoofer output is  
boosted up.  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
FRONT L/R:  
The low-frequency signals fed  
from the front speaker outputs  
are boosted up. However, no  
audios output from the  
subwoofer when setting to this  
option.  
RM-SXV012E  
REMOTE CONTROL  
While the [SPK.SETTING] page of the preference  
display is shown  
The [BASS REDIRECT] setting is effective only  
when at least any one of the speaker sizes is set to  
[SMALL]. If none of them is set to [SMALL], this  
setting is no activated.  
1 Use 5/to move to [SIZE] and press  
ENTER.  
The SIZE display page appears on the TV screen.  
points to [FRONT SPEAKER].  
See page 61 for details about how to bring up the  
[SPK.SETTING] page.  
([NONE] appears in the setting field.)  
No audio is output from the SUBWOOFER jack  
when [FRONT L/R] is selected. If the front speaker  
size is set to [SMALL], the [BASS REDIRECT]  
setting is fixed to [SUBWOOFER].  
SIZE  
FRONT SPEAKER  
CENTER SPEAKER  
REAR SPEAKER  
BASS REDIRECT  
RETURN  
LARGE  
SMALL  
SMALL  
NOTE  
SUB WOOFER  
During playback of a DVD AUDIO, audio signal may not be  
output correctly depending on the conditions of the unit  
or the disc itself.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
2 Use 5/to select the speaker to be set and  
press ENTER.  
FRONT SPEAKER: Front speakers  
CENTER SPEAKER: Center speaker  
REAR SPEAKER:  
Rear speakers  
3 Use 5/to select the size and press ENTER.  
LARGE: Large speaker(s) which can fully  
reproduce the low-frequency range.  
SMALL: Small speaker(s) which cannot fully  
reproduce the low-frequency range.  
NONE:  
No speaker(s) connected. This option is  
only for [CENTER SPEAKER] and [REAR  
SPEAKER].  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
To set the delay time  
To set the speaker level  
You can adjust the delay time of each speaker.  
Selecting each speaker distance, which is on the basis of  
the distance between the front speakers and the listening  
position, sets an appropriate delay time. Check that what  
the distance to each speaker is and set distance values  
following the procedure.  
You can adjust the output level of each speaker.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
TV  
DVD  
CH  
STANDBY/ON  
+
OPEN/  
CLOSE  
TV  
DVD  
5/∞  
VOL  
-
VOL+  
ENTER  
TV1  
1
TV2  
2
TV3  
3
ENTER  
TV4  
4
TV5  
5
TV6  
6
CH  
-
PREVIOUS  
CLEAR  
NEXT  
TV7  
7
TV8  
8
TV0  
0
TV9  
9
SELECT  
STROBE  
TV-/--  
10  
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
SLOW  
-
SLOW+  
VFP  
CH  
+
REPEAT SUB TITLE AUDIO  
5/∞  
VOL-  
VOL+  
fs/Rate PROGRESSIVE  
SCAN  
ENTER  
DIGEST ANGLE  
ZOOM  
ENTER  
3D  
PAL/  
CH  
-
PHONIC  
NTSC  
AMP VOL  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
RM-SXV012E  
REMOTE CONTROL  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
While the [SPK.SETTING] page of the preference  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
display is shown  
RM-SXV012E  
REMOTE CONTROL  
1 Use 5/to move to [LEVEL] and press  
ENTER.  
While the [SPK.SETTING] page of the preference  
The LEVEL display page appears on the TV screen.  
points to [CENTER SPEAKER].  
display is shown  
See page 61 for details about how to bring up the  
[SPK.SETTING] page.  
1 Use 5/to move to [DELAY] and press  
ENTER.  
The DELAY display page appears on the TV screen.  
points to [CENTER SPEAKER].  
See page 61 for details about how to bring up the  
[SPK.SETTING] page.  
LEVEL  
FRONT SPEAKER  
CENTER SPEAKER  
REAR SPEAKER  
SUB WOOFER  
TEST TONE  
0dB  
0dB  
0dB  
0dB  
OFF  
RETURN  
DELAY  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
CENTER SPEAKER  
REAR SPEAKER  
RETURN  
0.0m  
1.5m  
2 Use 5/to select the speaker to be set and  
press ENTER.  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
FRONT SPEAKER: Front speakers (This item  
cannot be selected. The level  
is fixed to 0dB.)  
2 Use 5/to select the speaker to be set and  
CENTER SPEAKER: Center speaker  
press ENTER.  
REAR SPEAKER:  
SUB WOOFER:  
Rear speakers  
Subwoofer speaker  
CENTER SPEAKER: Center speaker  
REAR SPEAKER:  
Rear speakers  
3 Use 5/to set the level and press ENTER.  
3 Use 5/to select the delay time and press  
When you select [CENTER SPEAKER], [REAR  
SPEAKER] or [SUB WOOFER], you can select the  
level from –6 to 6dB in 1dB units.  
ENTER.  
When you select [CENTER SPEAKER], you can  
select the delay time from [0.0m] to [1.5m] in 30cm  
units.  
When you select [REAR SPEAKER], you can select  
the delay time from [0.0m] to [4.5m] in 30cm units.  
4 Repeat steps 2 and 3 if you set other  
speakers.  
• To return to the [SPK.SETTING] page  
Use 5/to move to [RETURN] and press ENTER.  
4 Repeat steps 2 and 3 if you set other  
speakers.  
NOTE  
• For the speaker(s) whose size is set to [NONE], the  
speaker level cannot be set.  
• To return to the [SPK.SETTING] page  
Use 5/to move to [RETURN] and press ENTER.  
NOTE  
• For the speaker(s) whose size is set to [NONE], the  
delay time cannot be set.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
To generate test tone signals  
You can check the level setting by monitoring the test  
tone.  
Limiting playback by  
children  
1 Use 5/to select [TEST TONE] and press  
This function restricts playback of DVD VIDEO discs  
which contain violent (and other) scenes according to  
the level set by the user. For example, if a movie which  
includes violent scenes supports the parental lock  
feature, such scenes which you do not want to let  
children view can be cut or replaced with other scenes.  
When PARENTAL LOCK is set in the OTHERS menu of  
the Preference display (see page 62), pressing ENTER on  
the remote control unit brings up the PARENTAL LOCK  
display shown following. This allows you to set limits on  
DVD VIDEO playback.  
ENTER.  
2 Use 5/to select [ON] and press ENTER.  
The test tone will be generated when you select  
the speaker(s) in the [LEVEL]display.  
(OTHERS display)  
OTHERS  
RESUME  
ON  
ON SCREEN GUIDE  
AUTO STANDBY  
AV COMPULINK MODE  
PARENTAL LOCK  
ON  
OFF  
DVD1  
SELECT  
ENTER  
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
Press ENTER.  
(PARENTAL LOCK display)  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
GB  
NONE  
_ _ _ _  
SELECT  
ENTER  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
5 While points to [SET LEVEL], press ENTER  
To set Parental Lock for the first time  
[PARENTAL LOCK]  
to bring up the pull-down menu.  
In the pull-down menu, [NONE] and levels [8] to [1]  
are available.  
[NONE] does not restrict playback. Level [1] is the  
strictest level. Discs rated higher than the selected  
level are restricted.  
Available :  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
PARENTAL LOCK  
TV1  
1
TV2  
2
TV3  
3
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
GB  
NONE  
TV4  
4
TV5  
5
TV6  
6
8
7
6
5
4
3
NONE  
_ _ _ _  
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
VOL-  
VOL+  
SELECT  
ENTER  
ENTER  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
5/∞  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
6 Use 5/to select a desired parental lock  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
level, then press ENTER.  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
moves to [PASSWORD].  
RM-SXV012E  
REMOTE CONTROL  
7 Enter a 4-digit password using the numeric  
buttons (0 to 9).  
While the [OTHERS] menu of the preference display is  
shown  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
GB  
NONE  
1234  
1 Use 5/to move to select [PARENTAL  
LOCK] and press ENTER.  
The Parental Lock on-screen display appears on  
the TV screen.  
...  
SELECT  
NEW PASSWORD? PRESS 0 ~ 9 KEY  
TO EXIT, PRESS CHOICE.  
ENTER  
points [COUNTRY CODE].  
See page 62 for details about how to bring up the  
[OTHERS] menu.  
8 Press ENTER.  
The parental lock feature is set.  
moves to [EXIT].  
2 While points to [COUNTRY CODE], press  
Pressing ENTER again returns to the [OTHERS]  
menu of the preference display.  
ENTER to bring up the pull-down menu.  
3 Use 5/to select the country code.  
Hint  
Select the code of the country whose standards  
were used to rate the DVD VIDEO disc content.  
See "Appendix A: Country/Area code list for  
Parental Lock" on page 75.  
• If you want to change the password in step 7, do it before  
pressing ENTER.  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
GB  
FX  
GA  
GB  
GD  
GE  
GF  
GH  
NONE  
_ _ _ _  
SELECT  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
TO EXIT, PRESS CHOICE.  
ENTER  
4 Press ENTER.  
moves to [SET LEVEL].  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
5 With pointing to [PASSWORD], enter a 4-  
digit password using the numeric buttons (0  
to 9).  
To change the settings  
[PARENTAL LOCK]  
The password entered in this step becomes the  
new password. If you want to keep the same  
password as before, enter the same password you  
did in step 2. Do not forget to enter a password  
after changing the country code and/or parental  
level. Otherwise, the new country code and/or  
parental level will not take effect.  
Available :  
You can change the Parental Lock settings later.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
6 Press ENTER.  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
moves to [EXIT].  
CH  
+
VOL-  
VOL+  
Pressing ENTER again returns to the [OTHERS]  
menu of the preference display.  
ENTER  
5/∞  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
NOTES  
SLOW  
-
SLOW+  
VFP  
• If you enter the wrong password more than 3 times in  
REPEAT SUB TITLE AUDIO  
step 2 above,  
moves to [EXIT] automatically and  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
5/do not work.  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
• If you forget your password in step 2  
Enter "8888". The current password is deleted and you  
can set a new password.  
RM-SXV012E  
REMOTE CONTROL  
While the [OTHERS] menu of the preference display is  
shown  
1 Use 5/to move to select [PARENTAL  
LOCK] and press ENTER.  
The Parental Lock on-screen display appears on  
the TV screen.  
points to [PASSWORD].  
See page 62 for details about how to bring up the  
[OTHERS] menu.  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
GB  
NONE  
_ _ _ _  
...  
SELECT  
ENTER  
NEW PASSWORD? PRESS 0 ~ 9 KEY  
TO EXIT, PRESS CHOICE.  
2 Enter your current 4-digit password using the  
numeric buttons (0 to 9) and press ENTER.  
moves to [COUNTRY CODE] if you enter the  
correct password.  
If you enter the wrong password, [WRONG!  
RETRY...] appears on the TV screen, and you  
cannot go to the next step.  
3 To change the [COUNTRY CODE] or [LEVEL],  
press ENTER to bring up the associated pull-  
down menu when is pointing the desired  
item.  
To select the item to be set, use 5/when no pull-  
down menu is shown.  
4 Use 5/to select the desired option and  
press ENTER.  
Note that if you change the country code, you  
must reselect the Parental Lock level.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial settings  
To temporarily release the Parental  
Lock [PARENTAL LOCK]  
Available :  
If the parental level is set to a strict value, some discs  
may not play at all. When you insert such a disc and try  
to play it, the following Parental Lock on-screen display  
appears on the TV screen, asking you whether you want  
the Parental Lock to be temporarily released or not.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV9  
9
Numeric  
buttons  
TV0  
0
MUTING  
+10  
TITLE/  
GROUP  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
CH  
+
5/∞  
VOL-  
VOL+  
ENTER  
ENTER  
CH  
-
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
fs/Rate PROGRESSIVE  
SCAN  
ZOOM  
DIGEST ANGLE  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
RM-SXV012E  
REMOTE CONTROL  
1 Use the 5/to move to [TEMPORARY  
RELEASE], then press ENTER.  
moves to [PASSWORD].  
When selecting [NOT RELEASE], press 0 (OPEN/  
CLOSE) to remove the disc.  
PARENTAL LOCK  
TEMPORARY RELEASE  
NOT RELEASE  
PASSWORD  
_ _ _ _  
SELECT  
ENTER  
USE 5∞ TO SELECT, USE ENTER TO CONFIRM  
2 Enter your 4-digit password using the  
numeric buttons (0 to 9).  
The Parental Lock is released, and the unit starts  
playback.  
If you enter the wrong password, [WRONG!  
RETRY...] appears on the TV screen.  
Enter the correct password.  
NOTE  
• When you enter the wrong password more than 3  
times in step 2 above,  
moves to [NOT RELEASE]  
automatically and 5/do not work.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Names of parts and controls  
Refer to the corresponding pages indicated in ( ) for details.  
Front panel  
1
2
3
4
5
6
7
XV-NA7 DVD AUDIO/DVD VIDEO/SUPER VCD/CD PLAYER  
DVD AUDIO PROGRESSIVE  
8
9
0
-
=
1 STANDBY/ON  
button (15)  
7 0 button (18, 20, 21)  
8 DVD AUDIO indicator  
9 PROGRESSIVE indicator  
0 Remote sensor (13)  
- Disc tray (18, 20)  
2 7 button (19, 20, 47)  
3 3 button (19, 21)  
4 8 PAUSE button (20, 22)  
5 4 button (22, 23)  
6 ¢ button (22, 23)  
= Display window (see the illustration below)  
Display window  
1
2
3
4
5
6 7  
8
1 Audio format indicators  
2 Disc indicator  
3 Group/title indicators  
4 Track/chapter indicators  
5 Repeat mode indicator  
6 3(play)/8(pause) indicator  
7 PROGRAM/RANDOM indicator  
8 Multi-information window  
Rear panel  
1
2
3
4
5
6
7
8
9
AUDIO OUT  
DIGITAL OUT  
VIDEO OUT  
AV OUT  
VIDEO  
VIDEO SIGNAL SELECTOR  
PCM / STREAM  
COMPONENT  
PB  
PAL  
COMPONENT  
COAXIAL OPTICAL  
VIDEO  
SUBWOOFER  
CENTER  
LEFT  
COMP.  
/RGB  
/S-VIDEO  
/AV OUT  
Y/C  
REMOTE  
Y
PR  
NTSC  
PAL  
2
AV COMPU LINK  
RIGHT  
REAR  
FRONT  
S-VIDEO  
1 AUDIO OUT jacks (6, 7, 8, 10, 11, 12)  
2 DIGITAL OUT jacks (OPTICAL/COAXIAL) (12)  
3 VIDEO OUT - VIDEO jack (6)  
VIDEO OUT - S-VIDEO jack (7)  
4 VIDEO OUT - COMPONENT VIDEO OUT jacks (8)  
5 VIDEO SIGNAL SELECTOR  
6 AV COMPU LINK jacks  
7 AV OUT connector (7)  
8 Region code label (4)  
9 AC Power cord (12)  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Remote control unit  
^
&
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
*
(
TV  
DVD  
1
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
7
TV-/--  
10  
TV8  
8
TV0  
0
TV9  
9
2
3
MUTING  
+10  
TITLE/  
TV/VIDEO  
CANCEL  
RETURN  
PAGE  
GROUP  
)
_
4
5
6
7
CH  
+
+
¡
VOL-  
VOL+  
ENTER  
CH  
-
8
9
PREVIOUS  
CLEAR  
NEXT  
£
¢
SELECT  
STROBE  
0
-
=
SLOW  
-
SLOW+  
VFP  
REPEAT SUB TITLE AUDIO  
~
!
@
fs/Rate PROGRESSIVE  
SCAN  
DIGEST ANGLE  
ZOOM  
3D  
PAL/  
PHONIC  
NTSC  
AMP VOL  
#
$
%
RM-SXV012E  
REMOTE CONTROL  
1 OPEN/CLOSE button (18, 20, 21)  
2 Numeric buttons  
3 RETURN button (27)  
$ 3D PHONIC button (41)  
% PAL/NTSC button (9)  
^ Infrared signal window (13)  
4 PAGE button (31)  
& TV - DVD switch (14, 15, 27, 47, 51, 57)  
5 TOP MENU button (27)  
6 Cursor selection (5 Up, Down) -  
CH (+/–) buttons (14)  
* TV STANDBY/ON  
( DVD STANDBY/ON  
button (14)  
button (15)  
) TV/VIDEO - CANCEL button (14)  
_ TITLE/GROUP button (28, 49, 55)  
+ MENU button (27)  
7 Cursor selection (2 Left, 3 Right) -  
VOL (+/–) buttons (14)  
8 CHOICE button (16, 57)  
9 4/PREVIOUS button (22, 23, 47, 52)  
0 7/CLEAR button (19, 20, 47, 50)  
- 3/SELECT button (19, 27, 47, 54)  
= 1/SLOW– button (22)  
~ REPEAT button (34, 49, 56)  
! SUBTITLE button (36)  
¡ ENTER button  
ON SCREEN button (25, 43)  
£ ¢/NEXT button (22, 23, 47, 52)  
¢ 8/STROBE button (20, 22, 23, 39, 47)  
¡/SLOW+ button (22)  
AUDIO - fs/Rate button (37, 42, 50)  
VFP-PROGRESSIVE SCAN button (10, 40)  
ZOOM +/– buttons (40, 53)  
@ DIGEST button (30)  
# ANGLE button (25, 38)  
AMP VOL +/– buttons (14)  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting  
service.  
POWER  
Symptom  
Possible cause  
Remedy  
Power does not come on.  
Power plug is not inserted securely.  
Plug in securely.  
OPERATION  
Symptom  
Possible cause  
Remedy  
The remote control unit does not work.  
Too far from the unit.  
More closer to the unit.  
The tip of the remote control unit is not  
pointed in the right direction.  
Point the infrared signal window toward  
the remote sensor on the front panel (see  
page 13).  
Batteries are exhausted.  
Replace the batteries with new ones.  
Battery polarity is incorrect.  
Take out the batteries and insert them  
again in the correct direction.  
The remote control unit is not set for  
operating your TV.  
Set the remote control unit for operating  
your TV (see page 14).  
The PAL/NTSC button on the remote  
control does not work.  
The NTSC/REMOTE/PAL switch is not  
correctly set.  
Set the NTSC/REMOTE/PAL switch on the  
rear panel to "REMOTE" while the unit is  
turned off (see page 9).  
The TV/VIDEO - CANCEL, 5//2/3 or  
numeric buttons do not work.  
The TV - DVD switch is not correctly set.  
To control the unit, set the TV - DVD  
switch to "DVD". To control your TV, set  
the TV - DVD switch to "TV" (see page 14).  
Operation is not possible.  
Microcomputer malfunction due to  
lightning or static electricity.  
Turn off the power and unplug the power  
cord, then connect the power cord again.  
Moisture condensation caused by a  
sudden change of temperature or  
humidity.  
Turn off the power, then turn it on a few  
hours later.  
The disc does not allow the operation, or  
a non-playable disc is loaded.  
Check and replace the disc (see page 4).  
The VIDEO SIGNAL SELECTOR on the  
rear panel cannot be worked.  
The switch position changed while unit  
power is on.  
Change the switch position while unit  
power is off.  
When using the TITLE/GROUP button to  
select a title during DVD VIDEO playback,  
appears on the TV screen and the title  
cannot be selected.  
Disc content does not allow the  
operation.  
Try to press 7 and select a title using the  
numeric buttons on the remote control.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
PICTURE  
Symptom  
Possible cause  
Remedy  
No picture is displayed on the monitor.  
Connection of video cable is incorrect.  
Input selection of TV is incorrect.  
Disc is not playable.  
Connect the cable correctly.  
Select correctly.  
Use a playable disc (see page 4).  
No picture is displayed on the monitor or  
the screen is blurred or divided into two  
parts.  
The unit is in the progressive scanning  
mode (i.e. the PROGRESSIVE indicator is  
lit) through it is connected to a TV via the  
VIDEO or S-VIDEO jack.  
Make the Progressive scanning mode  
inactive by using the VFP - PROGRESSIVE  
SCAN button (see page 10).  
The picture is noisy or blurred.  
The unit is connected to a VCR directly  
and the copyguard function is activated.  
Connect the unit so that the picture signal  
flows directly to the TV.  
With some discs, the picture may be  
blurred when [STILL MODE] is set to  
[FRAME] or [AUTO].  
Set [STILL MODE] to [FIELD] (see page  
59).  
No picture is displayed when connected  
to a TV with the VIDEO OUT jack, S-VIDEO  
jack or SCART connector.  
The VIDEO SIGNAL SELECTOR on the  
rear panel is not set correctly.  
Set the VIDEO SIGNAL SELECTOR on the  
rear panel to "PAL" while the unit is  
turned off (see page 7).  
No picture is displayed when connected  
to a TV with the COMPONENT VIDEO  
OUT jacks.  
Set the VIDEO SIGNAL SELECTOR on the  
rear panel to "NTSC" while the unit is  
turned off (see page 8).  
The picture does not fit the television  
screen.  
[MONITOR TYPE] is not set correctly.  
Select monitor type correctly (see page  
59).  
TV settings are incorrect.  
Set the television correctly.  
The upper and lower parts of the  
preference display are cut off when using  
wide-aspect TV.  
It depends on the setting on the TV.  
Adjust the TV screen using the controls  
on the TV.  
AUDIO  
Symptom  
Possible cause  
Remedy  
No audio is reproduced.  
Connection is incorrect.  
Check the connection.  
Select correctly.  
Input selection of amplifier is incorrect.  
No audio is reproduced when playing  
back a DVD disc recorded with high  
sampling frequency (88.2 kHz or more)  
linear PCM audio using the DIGITAL OUT  
jack.  
Audio signal is not emitted from the unit’s  
DIGITAL OUT (see page 60).  
Use AUDIO OUT when playing back such  
discs.  
Audio volume is low when playing back  
with the unit, compared with the TV or  
VCR.  
The audio level recorded on a DVD VIDEO  
is lower compared with a TV broadcast.  
Turn up the volume of the TV or amplifier/  
receiver.  
Remember to turn the volume back down  
before switching back to a TV broadcast  
to prevent a sudden burst of high-volume  
sound.  
Sound is distorted or noise is generated.  
Disc is dirty.  
Wipe the disc surface (see page 5).  
[MULTI CH] is shown in the display  
window when playing back DVD AUDIO  
disc.  
The track is prohibited from down-mixing  
to 2-channel stereo audio.  
Listen in multichannel surround audio.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Frequently Asked Questions  
Ref.  
page  
Question  
Answer  
Can I play back DVD VIDEO and Video CD discs purchased  
abroad?  
You can play DVD VIDEO disc with the Region Code (local  
code) containing "ALL" or "2" recorded using the NTSC or  
PAL formats. You can select "NTSC" or "PAL" while using  
the NTSC/REMOTE/PAL switch on the rear panel.  
4
Can I play back a DVD VIDEO disc without any Region  
Code number?  
The Region code indicates conformity to DVD standards.  
Any DVD VIDEO which does not conform to the DVD  
standards cannot be played.  
4
4
Can I play back a CD-R/RW disc with still pictures in other  
than the JPEG format?  
No, the unit cannot display pictures in formats other than  
JPEG.  
Can I play back audio on a disc labeled "Dolby Digital EX"?  
Yes, you can play back the disc because Dolby Digital EX  
is compatible with Dolby Digital. However, to get the  
maximum performance of Dolby Digital EX, we  
recommend to connect the DIGITAL OUT jack to a  
decoder or amplifier/receiver with built-in decoder that  
supports Dolby Digital EX. In this case, set [DIGITAL  
AUDIO OUTPUT] on the [AUDIO] preference display to  
[STREAM/PCM].  
60  
60  
Can I play back audio on a disc labeled "DTS ES"? Is there  
any difference in the playback settings between Discrete  
and Matrix recording systems for DTS ES?  
You cannot listen to the audio using the analog audio  
outputs (AUDIO OUT). However, you can listen to DTS ES  
audio by connecting the DIGITAL OUT jack to a decoder or  
amplifier/receiver with built-in decoder that supports DTS  
ES. In this case, set [DIGITAL AUDIO OUTPUT] on the  
[AUDIO] preference display to [STREAM/PCM].  
Can this unit play back a disc labeled "THX"?  
What does "THX" mean?  
Yes you can. "THX" is the name of a standard for high  
quality picture and audio recording, established by  
Lucasfilm Ltd. The "THX" label on a disc certifies that it  
meets this standard.  
When files of the MP3 and Audio CD formats are recorded  
on a same disc, can the unit play files of both formats?  
Discs like this are of the data CD format, not the Audio CD  
format. The unit can play only the MP3 files.  
4, 47  
Some Dolby Digital discs contain 5.1-ch Surround or  
Dolby Surround audio data. What is the difference  
between these two types?  
Both are surround sound standards developed by Dolby  
Laboratories Inc. in the U.S.A.  
In Dolby Surround, two-channel surround audio  
information is recorded onto the analog stereo (left and  
right) channels together with front stereo audio  
information. When played back, the surround signals are  
separated by a Dolby Surround or Dolby Pro Logic  
decoder.  
4
Dolby Digital digitally encodes and records up to six  
channels of information for left, right, center, rear left, rear  
right and LFE (Low-Frequency Effect, for use with a  
subwoofer).  
When played back, a Dolby Digital decoder decodes the  
data and outputs signals separately.  
Generally, Dolby Digital sounds better.  
When playing back a DVD VIDEO or Video CD disc,  
something like a mosaic appears on the TV screen. Is this  
because of a malfunction of the unit?  
This is block noise specific to a digitally recorded motion  
picture. It is not a malfunction of the unit.  
The unit does not function as described in this Instruction  
Manual.  
The operation of this unit may occasionally be  
unacceptable due to the intention of the disc contents  
creator and/or structural restrictions.  
Can I record DVD VIDEO data on a video tape?  
Can this unit record data?  
Most of all DVD VIDEO discs are copy-protected so that  
you cannot record DVD VIDEO data onto any video tape.  
3
No, it cannot.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Specifications  
* Specifications and appearance subject to change without prior notice.  
General  
Readable discs:  
DVD AUDIO, DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD-DA), MP3  
format, JPEG, CD-R/RW (CD-DA, SVCD, Video CD, MP3 format, JPEG)  
PAL: 625i (Interlaced scanning)  
Video format:  
NTSC: 525i (Interlaced scanning)/525p (Progressive scanning) (selectable)  
Other  
Power requirements:  
Power consumption:  
Mass:  
AC 230 V Ó, 50 Hz  
15 W (POWER ON), 2.4 W (STANDBY mode)  
2.4 kg  
Dimensions (W × H × D):  
435 mm × 55 mm × 258.4 mm  
Video outputs  
COMPONENT (pin jacks):  
Y Output:  
1.0 Vp-p (75 )  
0.7 Vp-p (75 )  
PB/PR Output:  
1.0 Vp-p (75 )  
Y Output:  
C Output:  
RGB Output:  
500 Lines or more  
VIDEO OUT (pin jack):  
S-VIDEO OUT (S jack):  
1.0 Vp-p (75 )  
286 mVp-p (75 )  
700mVp-p(75 )  
Horizontal resolution:  
Audio outputs  
ANALOG OUT (pin jack):  
DIGITAL OUT: (COAXIAL):  
(OPTICAL):  
2.0 Vrms (10 k)  
0.5 Vp-p (75 termination)  
–21 dBm to –15 dBm (peak)  
Audio characteristics  
Frequency response:  
CD  
(sampling frequency 44.1 kHz):  
2 Hz to 20 kHz  
2 Hz to 22 kHz  
DVD (sampling frequency 48 kHz):  
(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)  
DVD (sampling frequency 96kHz/88.2 kHz):2 Hz to 44 kHz  
DVD (sampling frequency 192 kHz/176.4 kHz): 2 Hz to 88 kHz  
16 bit: More than 98 dB  
Dynamic range:  
20 bit: More than 110 dB  
24 bit: More than 110 dB  
Unmeasurable (less than 0.002%)  
Less than 0.002%  
Wow and flutter:  
Total harmonic distortion:  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Appendix A: Country/Area code list for Parental Lock  
This list is used for the Parental Lock operation. For details, see page 65.  
AD Andorra  
ER Eritrea  
ES Spain  
ET Ethiopia  
FI Finland  
FJ Fiji  
Lao People’s Democratic  
Republic  
RW Rwanda  
LA  
AE United Arab Emirates  
AF Afghanistan  
AG Antigua and Barbuda  
AI Anguilla  
SA Saudi Arabia  
SB Solomon Islands  
SC Seychelles  
LB Lebanon  
LC Saint Lucia  
LI Liechtenstein  
LK Sri Lanka  
SD Sudan  
AL Albania  
Falkland Islands  
(Malvinas)  
SE Sweden  
FK  
LR Liberia  
AM Armenia  
SG Singapore  
Micronesia (Federated  
States of)  
LS Lesotho  
AN Netherlands Antilles  
AO Angola  
SH Saint Helena  
SI Slovenia  
FM  
LT Lithuania  
FO Faroe Islands  
FR France  
LU Luxembourg  
LV Latvia  
AQ Antarctica  
AR Argentina  
AS American Samoa  
AT Austria  
SJ Svalbard and Jan Mayen  
SK Slovakia  
FX France, Metropolitan  
GA Gabon  
LY Libyan Arab Jamahiriya  
MA Morocco  
SL Sierra Leone  
SM San Marino  
SN Senegal  
GB United Kingdom  
GD Grenada  
MC Monaco  
AU Australia  
MD Moldova, Republic of  
MG Madagascar  
MH Marshall Islands  
ML Mali  
AW Aruba  
SO Somalia  
GE Georgia  
AZ Azerbaijan  
BA Bosnia and Herzegovina  
BB Barbados  
BD Bangladesh  
BE Belgium  
SR Suriname  
GF French Guiana  
GH Ghana  
ST Sao Tome and Principe  
SV El Salvador  
SY Syrian Arab Republic  
SZ Swaziland  
GI Gibraltar  
MM Myanmar  
MN Mongolia  
MO Macau  
GL Greenland  
GM Gambia  
BF Burkina Faso  
BG Bulgaria  
TC Turks and Caicos Islands  
TD Chad  
GN Guinea  
MP Northern Mariana Islands  
MQ Martinique  
MR Mauritania  
MS Montserrat  
MT Malta  
GP Guadeloupe  
GQ Equatorial Guinea  
GR Greece  
BH Bahrain  
French Southern  
Territories  
TF  
BI Burundi  
TG Togo  
BJ Benin  
South Georgia and the  
South Sandwich Islands  
TH Thailand  
TJ Tajikistan  
TK Tokelau  
GS  
BM Bermuda  
MU Mauritius  
MV Maldives  
MW Malawi  
BN Brunei Darussalam  
BO Bolivia  
GT Guatemala  
GU Guam  
TM Turkmenistan  
TN Tunisia  
BR Brazil  
GW Guinea-Bissau  
GY Guyana  
MX Mexico  
BS Bahamas  
MY Malaysia  
MZ Mozambique  
NA Namibia  
TO Tonga  
BT Bhutan  
HK Hong Kong  
TP East Timor  
TR Turkey  
BV Bouvet Island  
BW Botswana  
BY Belarus  
Heard Island and  
McDonald Islands  
HM  
NC New Caledonia  
NE Niger  
TT Trinidad and Tobago  
TV Tuvalu  
HN Honduras  
HR Croatia  
HT Haiti  
BZ Belize  
NF Norfolk Island  
NG Nigeria  
TW Taiwan  
CA Canada  
Tanzania, United Republic  
of  
CC Cocos (Keeling) Islands  
CF Central African Republic  
CG Congo  
HU Hungary  
ID Indonesia  
IE Ireland  
IL Israel  
TZ  
NI Nicaragua  
NL Netherlands  
NO Norway  
UA Ukraine  
UG Uganda  
CH Switzerland  
CI Cô te d’Ivoire  
CK Cook Islands  
CL Chile  
United States Minor  
UM  
NP Nepal  
IN India  
Outlying Islands  
NR Nauru  
British Indian Ocean  
Territory  
US United States  
UY Uruguay  
IO  
NU Niue  
NZ New Zealand  
OM Oman  
IQ Iraq  
CM Cameroon  
CN China  
UZ Uzbekistan  
IR Iran (Islamic Republic of)  
IS Iceland  
Vatican City State (Holy  
See)  
VA  
PA Panama  
CO Colombia  
CR Costa Rica  
CU Cuba  
PE Peru  
IT Italy  
Saint Vincent and the  
Grenadines  
VC  
PF French Polynesia  
PG Papua New Guinea  
PH Philippines  
PK Pakistan  
JM Jamaica  
JO Jordan  
VE Venezuela  
VG Virgin Islands (British)  
VI Virgin Islands (U.S.)  
VN Vietnam  
CV Cape Verde  
CX Christmas Island  
CY Cyprus  
JP Japan  
KE Kenya  
PL Poland  
KG Kyrgyzstan  
KH Cambodia  
KI Kiribati  
CZ Czech Republic  
DE Germany  
PM Saint Pierre and Miquelon  
PN Pitcairn  
VU Vanuatu  
WF Wallis and Futuna Islands  
WS Samoa  
DJ Djibouti  
PR Puerto Rico  
PT Portugal  
KM Comoros  
KN Saint Kitts and Nevis  
DK Denmark  
YE Yemen  
DM Dominica  
DO Dominican Republic  
DZ Algeria  
PW Palau  
Korea, Democratic  
People’s Republic of  
YT Mayotte  
KP  
PY Paraguay  
QA Qatar  
YU Yugoslavia  
ZA South Africa  
ZM Zambia  
KR Korea, Republic of  
KW Kuwait  
EC Ecuador  
RE Réunion  
EE Estonia  
KY Cayman Islands  
KZ Kazakhstan  
RO Romania  
ZR Zaire  
EG Egypt  
RU Russian Federation  
ZW Zimbabwe  
EH Western Sahara  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Appendix B: Glossary  
Aspect ratio  
Dynamic range  
A ratio which defines the shape of the rectangular  
picture in a TV. It is the width of the picture relative to  
the height. A conventional TV picture is 4:3 in aspect  
ratio.  
The difference between the loudest and softest  
sounds.  
Dynamic range compression  
The dynamic range compression (DRC) reduces the  
dynamic range so that you can turn down the volume  
to avoid disturbing others yet still hear the detail of  
quiet passages.  
Bitstream  
The digital form of multichannel audio data (e.g., 5.1-  
channel) before it is decoded into its various channels.  
Channel, CH  
Extension  
Stereo or multichannel audio consists of "channel"  
signals. "Stereo" audio consists of left and right  
channels, while 5.1-channel Dolby Digital consists of  
six channels (front left, front right, rear left, rear right,  
center and LFE (Low-Frequency Effect channel), for use  
with a sub-woofer).  
Several letters at the end of a file name. File name  
extensions usually follow a period and indicate the  
type of information stored in the file.  
Finalize  
When conducting multisession recording, this means  
the closing of a session (fixing) by indicating the  
halting of writing so as to prevent the addition of any  
more sessions.  
Chapter  
The smallest division on DVD VIDEO. It is a division of  
a title and similar to a track for Audio CD or Video CD.  
Fs  
Component video  
See "Sampling frequency."  
Video signals with three channels of separate  
information that makes up the picture. There are some  
types of component video, such as R/G/B and Y/CB(PR)/  
CR(PR).  
Group  
The largest division on DVD AUDIO.  
ID3 tag  
A tag embedded in an MP3 file indicating what song,  
artist, and album it comes from. You can edit these  
tags.  
Composite video  
A single video signal commonly used in most  
consumer video products that contains all luminance,  
color, and synchronization information.  
Interlacced scanning  
In a conventional video system, a picture is shown on  
the display monitor in between lines of two halves.  
The Interlacced scanning system places lines of the  
second half of the picture in-between lines of the first  
half of the picture.  
Dolby Digital (AC3)  
A six-channel system consisting of left, center, right,  
left rear, right rear and LFE (Low-Frequency Effect  
channel, for use with a sub-woofer) channels. All  
processing is done in the digital domain.  
Not all Dolby Digital discs contain six (5.1) channels of  
information.  
ISO 9660 Format  
The most common international standard for the  
logical format of files and directories on a CD-ROM.  
Dolby Surround/Dolby Pro Logic/Dolby Pro Logic II  
Dolby Surround is a five-channel system consisting of  
left, center, right and left rear, right rear channels. All  
processing is done in the digital domain.  
JPEG  
A popular file format for still image compression and  
storage.  
Dolby Pro Logic is a four-channel system consisting of  
left, center, right and rear channels. The single rear  
channel is usually played through two speakers.  
Dolby Pro Logic II is an advanced matrix decoder that  
derives five-channel surround (Left, Center, Right, Left  
Surround, and Right Surround) from any stereo  
program material, whether or not it has been  
specifically Dolby Surround encoded.  
JPEG stands for Joint Photographic Experts Group.  
There are three sub-types of the JPEG format as  
follows.  
• baseline JPEG:  
used for digital cameras, the  
web, etc.  
• progressive JPEG: used for the web  
• lossless JPEG:  
an old type, rarely used now  
Letter box  
Down - mix  
A type of video display for normal (4:3) TV screens.  
Black bars are shown at the top and bottom of the  
image to allow playing of a wide-screen (16:9) movie  
without cutting off any of the image.  
Internal stereo mix of multichannel surround audio by  
a DVD player. The down - mix signals are output from  
stereo output connectors.  
DTS  
Linear PCM audio  
A Digital Surround audio encoding format configured  
with six (5.1) channels, similar to Dolby Digital. It  
requires a decoder, either in the player or in an  
external receiver. DTS stands for Digital Theater  
Systems.  
PCM stands for "pulse code modulation." Linear PCM  
is the usual method for digitally encoding audio  
without compression, and is used for the audio tracks  
on DVD VIDEO discs, Audio CDs, etc.  
Not all DTS discs contain six (5.1) channels of  
information.  
Menu  
Most DVD AUDIO, DVD VIDEO or SVCD/Video CD discs  
provide a menu, through which users can select  
desired material, conditions, etc.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
MLP  
MLP stands for "Meridian Lossless Packing."A lossless  
audio compression system that can completely  
recreate the PCM signal.  
PBC  
PBC stands for "Playback control" and is a method of  
controlling disc play for Video CDs (VCD). You are able  
to interact with the disc through menus.  
MP3  
Region code  
MP3 is an audio data compression format, which  
stands for MPEG-1 Audio Layer 3. Using MP3, you can  
achieve a data reduction of about 1:10.  
Code identifying a geographic region of compatibility  
for a DVD.  
RGB  
MPEG  
An abbreviation for Red, Green, and Blue. Color  
monitors and color television sets display different  
hues by mixing these three colors.  
A family of Standards for compressing audio-visual  
information. "MPEG" standards include MPEG-1,  
MPEG-2 and MPEG-4. Video CD and MP3 are based on  
MPEG-1, while DVD is based on MPEG-2. MPEG stands  
for Moving Picture coding Experts Group.  
Sampling frequency  
The rate at which measurements of an audio signal are  
taken during A/D and D/A conversion. The sampling  
frequency is expressed in samples per second.  
MPEG Multichannel  
This feature expands the 5.1 channel audio format  
recorded on the disc to a 7.1 channel format. The  
further expansion of the 5.1 channel audio makes it  
easy for you to reproduce the movie theater  
experience in your own home.  
Surround  
An audio system with more than two (left and right)  
channels, usually including rear channels, etc.  
S-video  
A video signal which improves picture quality over  
standard composite connections. Used on Super VHS,  
DVD, high end TV monitors, etc.  
Multisession  
A method of adding data to a CD-R/CD-RW in more  
than one recording session using the Track-At-Once  
method.  
Title  
The largest division on DVD VIDEO.  
NTSC (National television system committee)  
A black and white and color television system format  
used in the U.S.A., Canada, Mexico and Japan.  
Track  
The smallest division on SVCD, Video CD and Audio  
CD discs.  
Packet Writing  
A method of writing data on a CD-R/CD-RW in small  
increments. Packets can be of fixed or variable length.  
Transfer rate  
The rate of transferring digital data. The transfer rate is  
usually expressed in bits per second. The DVD system  
uses a variable transfer rate for high efficiency.  
PAL (Phase Alternation by Line)  
A color television system format used extensively in  
Western Europe.  
Pan and scan  
A type of video display for normal (4:3) TV screens.  
The image is zoomed to fill the screen vertically, and  
the field of view may be panned while the left and/or  
right sides of the picture are cut off.  
Parental lock  
A DVD function that prevents undesired viewing by  
children depending on disc content. Ordinarily, a  
password is required to play back a locked disc.  
Otherwise, undesirable scenes are automatically  
skipped or replaced with other pictures.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”  
This equipment has been designed and manufactured to meet international safety standards  
but, like any electrical equipment, care must be taken if you are to obtain the best results and  
safety is to be assured.  
Do read the operating instructions before you attempt to use the equipment.  
Do ensure that all electrical connections (including the mains plug, extension leads and  
interconnections between pieces of equipment) are properly made and in accordance with the  
manufacturers instructions. Switch off and withdraw the mains plug when making or changing  
connections.  
Do consult your dealer if you are ever in doubt about the installation, operation or safety of  
your equipment.  
Do be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or  
if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it  
is designed for unattended operation or has a standby mode.  
Switch off using the switch on the equipment and make sure that your family know how to do  
this.  
Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the  
requirements of traffic safety. It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume as such use can permanently damage your  
hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete  
safety always fit the manufacturers approved stand or legs with the fixings provided according  
to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
—NEVER let anyone, especially children, push anything into holes, slots or any other opening in  
the case -this could result in a fatal electrical shock.;  
—NEVER guess or take chances with electrical equipment of any kind -it is better to be safe than  
sorry!  
VICTOR COMPANY OF JAPAN, LIMITED  
J
V
C
0702KTYBICJSC  
EN.  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
VIDEO SIGNAL  
SELECTOR  
Commutateur  
NSTC/REMOTE/  
PAL  
Commutateur  
Caution!  
COMP/RGB - Y/C  
Before connecting the unit to other equipment, be sure to set the  
VIDEO SIGNAL SELECTOR switches on the unit’s rear panel  
properly for the type of connection you are making. Be sure to set  
the switch while the unit power is off. The table below describes the  
proper settings. If the VIDEO SIGNAL SELECTOR switches are not  
set properly, the unit will not be able to display video correctly.  
Prises  
AV OUT (SCART) *1 PAL  
VIDEO *1  
S-VIDEO *1  
COMP/RGB ou Y/C  
COMP./RGB  
Y/C  
PAL  
PAL  
Always shut off power to the unit if you change the setting after  
making connections. See the unit’s Instructions manual for more  
information.  
COMPONENT  
NTSC ou  
REMOTE  
COMP/RGB ou Y/C  
(l’un ou l’autre)  
VIDEO OUT *2  
*1: A la connexion du lecteur DVD en utilisant les connecteurs  
VIDEO, S-VIDEO ou AV OUT (SCART), le commutateur NTSC/  
REMOTE/PAL doit être réglé à "PAL".  
VIDEO SIGNAL  
SELECTOR  
NTSC/REMOTE/ COMP./RGB - Y/C  
PAL switch  
switch  
*2: Les signaux en format NTSC sont fournis seulement des prises  
Jacks  
AV OUT (SCART) *1 PAL  
VIDEO *1  
COMPONENT VIDEO OUT.  
COMP./RGB or Y/C  
COMP./RGB  
Y/C  
NEDERLANDS  
Let op!  
PAL  
PAL  
Voordat u het apparaat op andere apparatuur aansluit, moet u de  
VIDEO SIGNAL SELECTOR schakelaars op het achterpaneel correct  
instellen overeenkomstig het soort aansluiting dat u maakt. Verzet de  
schakelaars terwijl het apparaat is uitgeschakeld. De onderstaande  
tabel toont de voorgeschreven instellingen. Als de VIDEO SIGNAL  
SELECTOR schakelaars niet correct zijn ingesteld, zal het beeld niet  
juist worden weergegeven.  
Schakel het apparaat altijd uit als u de instellingen wijzigt nadat de  
aansluitingen zijn gemaakt. Zie de Gebruiksaanwijzing van het  
apparaat voor nadere bijzonderheden.  
S-VIDEO *1  
COMPONENT  
VIDEO OUT *2  
COMP./RGB or Y/C  
(Don't care)  
NTSC or REMOTE  
*1: When connecting the DVD player using the VIDEO, S-VIDEO  
jack, or AV OUT (SCART) connectors, you must set the NTSC/  
REMOTE/PAL switch to "PAL."  
*2: Signals in NTSC format are output only from the COMPONENT  
VIDEO OUT jacks.  
VIDEO SIGNAL  
DEUTSCH  
SELECTOR  
NTSC/REMOTE/ COMP./RGB - Y/C  
PAL schakelaar  
schakelaar  
Vorsicht!  
Aansluitingen  
AV OUT (SCART) *1 PAL  
VIDEO *1  
Bevor Sie das Gerät an andere Geräte anschließen, müssen Sie  
unbedingt den VIDEO SIGNAL SELECTOR Schalter auf der  
Rückseite des Geräts auf den neuen Anschlußtyp stellen. Stellen Sie  
den Schalter unbedingt nur bei ausgeschaltetem Gerät um. Die  
korrekten Einstellungen sind auf der nachstehenden Tabelle  
aufgeführt. Falls der VIDEO SIGNAL SELECTOR Schalter nicht  
korrekt gestellt ist, kann das Gerät kein richtiges Videobild anzeigen.  
COMP./RGB of Y/C  
COMP./RGB  
Y/C  
PAL  
PAL  
S-VIDEO *1  
COMPONENT  
COMP./RGB of Y/C  
(Niet van belang)  
NTSC of REMOTE  
VIDEO OUT *2  
Schalten Sie grundsätzlich die Steckverbindung zum Gerät aus, falls  
Sie die Einstellung nach Anschluß der Kabel ändern wollen. Näheres  
hierzu finden Sie in der Bedienungsanleitung des Geräts.  
*1: Wanneer u de DVD-speler via de VIDEO, S-VIDEO of AV OUT  
(SCART) aansluitingen aansluit, moet u de NTSC/REMOTE/PAL  
schakelaar op "PAL" zetten.  
VIDEO SIGNAL  
*2: Signalen in NTSC formaat kunnen alleen via de COMPONENT  
SELECTOR  
NTSC/REMOTE/ COMP./RGB-Y/C-  
VIDEO OUT aansluitingen worden uitgestuurd.  
PAL Schalter  
Schalter  
ESPAÑOL  
¡Precaución!  
Buchsen  
COMP./RGB oder  
Y/C  
AV OUT (SCART) *1 PAL  
Antes de conectar la unidad a otro equipo, asegúrese de ajustar  
correctamente los selectores VIDEO SIGNAL del panel posterior de  
la unidad de acuerdo con el tipo de conexión realizada. Asegúrese de  
ajustar el selector mientras la alimentación de la unidad esté  
desconectada. La tabla siguiente describe los ajustes apropiados. Si  
no se ajustan correctamente los selectores VIDEO SIGNAL, la unidad  
no podrá mostrar correctamente el vídeo.  
VIDEO *1  
S-VIDEO *1  
PAL  
PAL  
COMP./RGB  
Y/C  
COMPONENT  
VIDEO OUT *2  
NTSC oder  
REMOTE  
COMP./RGB oder  
Y/C (gleichgültig)  
Desconecte siempre la alimentación de la unidad para cambiar el  
ajuste después de haber hecho las conexiones. Para más  
información, consulte el manual de instrucciones de la unidad.  
*1: Wenn Sie den DVD-Player über die Buchsen VIDEO,  
S-VIDEO oder AV OUT (SCART) anschließen, müssen Sie den  
NTSC/REMOTE/PAL-Schalter auf "PAL" stellen.  
VIDEO SIGNAL  
*2: Ein Signal im NTSC-Format wird nur von den COMPONENT  
VIDEO OUT Buchsen ausgespeist.  
SELECTOR  
Selector NTSC/  
REMOTE/PAL  
Selector COMP./  
RGB - Y/C  
Tomas  
AV OUT (SCART) *1 PAL  
FRANÇAIS  
Attention!  
COMP./RGB o Y/C  
COMP./RGB  
Y/C  
VIDEO *1  
PAL  
PAL  
Avant de raccorder l’appareil à un autre équipement, régler  
correctement les sélecteurs VIDEO SIGNAL SELECTOR sur le  
panneau arrière de l’appareil pour le type de raccordement à faire.  
Régler les sélecteurs quand l’appareil est hors tension. Le tableau ci-  
dessous indique les réglages corrects. Si les sélecteurs sélecteurs  
VIDEO SIGNAL SELECTOR ne sont pas réglés correctement,  
l’appareil ne pourra pas afficher correctement la vidéo.  
S-VIDEO *1  
COMPONENT  
COMP./RGB o Y/C  
(Cualquiera)  
NTSC o REMOTE  
VIDEO OUT *2  
*1: Cuando conecte el reproductor de DVD empleando los  
conectores VIDEO, S-VIDEO o AV OUT (SCART), deberá ajustar  
el selector NTSC/REMOTE/PAL en "PAL".  
Toujours mettre l’appareil hors tension si le réglage est modifié après  
les connexions. Voir le mode d'emploi de l’appareil pour plus  
d'informations.  
*2: Las señales en el formato NTSC sólo se emiten por las tomas  
COMPONENT VIDEO OUT.  
LE40912-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ITALIANO  
Attenzione!  
SUOMI  
Huomautus  
Prima di collegare l’apparecchio ad un altro apparecchio, accertarsi di  
regolare gli interruttori VIDEO SIGNAL SELECTOR sul pannello  
posteriore dell'apparecchio appropriatamente al tipo di collegamento  
che si sta eseguendo. Accertarsi di regolare l’interruttore mentre  
l’apparecchio è spento. La tabella sottostante descrive le  
impostazioni appropriate. Se gli interruttori VIDEO SIGNAL  
SELECTOR non sono regolati appropriatamente, l’apparecchio non  
sarà in grado di visualizzare le immagini correttamente.  
Ennen kuin liität laitteen muuhun laitteeseen, aseta laitteen  
takaseinässä olevat VIDEO SIGNAL SELECTIOR -kytkimet sopiviksi  
tekemällesi liitäntätyyppille. Säädä kytkimen asento laitteen virran  
ollessa katkaistu. Oikeat säädöt on näytetty alla olevassa taulukossa.  
Jos VIDEO SIGNAL SELECTOR -kytkimiä ei aseteta oikein, laite ei  
pysty näyttämään videota oikealla tavalla.  
Katkaise aina virta laitteesta, jos muutat säätöä liitäntöjen  
suorittamisen jälkeen. Katso tarkemmat tiedot laitteen  
käyttöohjeesta.  
Spegnere sempre l’apparecchio se si cambia l’impostazione dopo  
aver eseguito i collegamenti. Per ulteriori informazioni, consultare il  
manuale delle istruzioni per l’uso ("Istruzioni") dell’apparecchio.  
VIDEO SIGNAL  
SELECTOR  
NTSC/REMOTE/ COMP./RGB - Y/C -  
VIDEO SIGNAL  
PAL -kytkin  
kytkin  
Interruttore  
NTSC/REMOTE/  
PAL  
SELECTOR  
Liittimet  
AV OUT (SCART) *1 PAL  
VIDEO *1  
Interruttore COMP./  
RGB - Y/C  
COMP./RGB tai Y/C  
COMP./RGB  
Y/C  
Prese  
PAL  
PAL  
AV OUT (SCART) *1 PAL  
COMP./RGB o Y/C  
COMP./RGB  
Y/C  
S-VIDEO *1  
VIDEO *1  
PAL  
PAL  
COMPONENT  
VIDEO OUT *2  
NTSC tai  
REMOTE  
COMP./RGB tai Y/C  
(Älä välitä)  
S-VIDEO *1  
COMPONENT  
VIDEO OUT *2  
COMP./RGB o Y/C  
(Indifferentemente)  
NTSC o REMOTE  
*1: Kun DVD-soitin liitetään käyttämällä VIDEO, S-VIDEO, tai AV  
OUT (SCART) liittimiä, NTSC/REMOTE/PAL -kytkin on  
asetettava asentoon "PAL."  
*1: Quando si collega il lettore DVD usando i connettori VIDEO, S-  
VIDEO o AV OUT (SCART), si deve regolare l’interruttore NTSC/  
REMOTE/PAL su "PAL".  
*2: NTSC-formaatin signaalit lähtevät vain liittimistä COMPONENT  
VIDEO OUT.  
*2: I segnali nel formato NTSC vengono emessi soltanto dalle  
prese COMPONENT VIDEO OUT.  
DANSK  
Forsigtig!  
SVENSKA  
Observera!  
Inden du tilslutter apparatet til andet udstyr, skal du huske at sætte  
VIDEO SIGNAL SELECTOR-omskifterne på apparatets bagside i den  
stilling, der modsvarer den type tilslutning, du udfører. Husk at sætte  
omskifteren i stilling, mens der er slukket for apparatet. I  
nedenstående oversigt beskrives de rigtige indstillinger. Hvis VIDEO  
SIGNAL SELECTOR-omskifterne ikke er sat i den rigtige stilling, kan  
apparatet ikke vise videoen på korrekt vis.  
Innan du ansluter apparaten till någon annan utrustning, måste du  
komma ihåg att ställa in omkopplarna VIDEO SIGNAL SELECTOR på  
baksidan av denna apparat för den typ av anslutning du tänker utföra.  
Var noga med att ställa in omkopplarna medan apparaten är  
avstängd. Tabellen här nedan beskriver de korrekta inställningarna.  
Om omkopplarna VIDEO SIGNAL SELECTOR inte ställs in korrekt,  
kan apparaten inte visa bilder på ett riktigt sätt.  
Sluk altid for apparatet, hvis du ændrer indstillingen, efter at du har  
foretaget tilslutningerne. Vi henviser til brugsvejledningen for  
apparaterne angående yderligere oplysninger.  
Stäng alltid av apparaten, om du ändrar en inställning efter  
anslutningen. Se apparatens bruksanvisning för ytterligare  
upplysningar.  
VIDEO SIGNAL  
SELECTOR  
NTSC/REMOTE/ COMP./RGB-  
VIDEO SIGNAL  
PAL-omkifter  
omskifter  
Omkopplaren  
NTSC/REMOTE/  
PAL  
SELECTOR  
Jackstik  
Omkopplaren  
COMP./RGB - Y/C  
COMP./RGB eller  
Y/C  
AV OUT (SCART) *1 PAL  
Utgångar  
COMP./RGB eller  
Y/C  
AV OUT (SCART) *1 PAL  
VIDEO *1  
S-VIDEO *1  
PAL  
PAL  
COMP./RGB  
Y/C  
VIDEO *1  
S-VIDEO *1  
PAL  
PAL  
COMP./RGB  
Y/C  
COMPONENT  
VIDEO OUT *2  
N NTSC eller  
REMOTE  
COMP./RGB eller  
Y/C (Ingen betydning)  
COMPONENT  
VIDEO OUT *2  
NTSC eller  
REMOTE  
COMP./RGB eller Y/C  
(Har ingen betydelse.)  
*1: NTSC/REMOTE/PAL-omskifteren skal sættes i stilling "PAL",  
når du tilslutter dvd-afspilleren via VIDEO-, S-VIDEO- eller AV  
OUT (SCART)-stikkene.  
*1: När du ansluter DVD-spelaren med användning av utgången  
VIDEO, S-VIDEO eller AV OUT (SCART), måste du sätta  
omkopplaren NTSC/REMOTE/PAL i läge "PAL".  
*2: Signaler i NTSC-format sendes kun ud fra COMPONENT VIDEO  
OUT-jackstikkene.  
*2: Signaler i NTSC-formatet matas endast ut från utgången  
COMPONENT VIDEO OUT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinite Peripherals Printer 216 User Manual
Insignia Car Amplifier NS A1000 User Manual
Intel Server TM700 User Manual
JVC Headphones HAW600RF User Manual
Kalorik Vacuum Cleaner USK SKV 2 User Manual
Karcher Pressure Washer G2600XC User Manual
Kenmore Microwave Oven 99721 User Manual
Kenmore Water Heater 153327164 User Manual
King Canada Staple Gun 8260FSN User Manual
KitchenAid Beverage Dispenser KUWO24LSBX01 User Manual