JVC DVD Player XV N320B User Manual

CAUTION  
Precautions  
Playable discs  
• DVD VIDEO, Audio CD, Video CD, SVCD  
Connections  
Before making connections:  
• Do not connect the AC power cord until all other connections have been made.  
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the  
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.  
DVD PLAYER  
XV-N320B  
XV-N322S  
To reduce the risk of electrical shocks, fire, etc.:  
1. Do not remove screws, covers or cabinet.  
2. Do not expose this appliance to rain or moisture.  
Notes on the power cord  
Connecting to a stereo audio amplifier (receiver)  
EX. 1  
• When you are away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet. A  
small amount of power (1.0 W) is always consumed while  
the power cord is connected to the wall outlet.  
• When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
• Do not handle the power cord with wet hands!  
• Disconnect the power cord before cleaning the  
player or moving the player.  
• Do not alter, twist or pull the power cord, or put  
anything heavy on it, which may cause fire, electric  
shock, or other accidents.  
• If the cord is damaged, consult a dealer and have the  
power cord replaced with a new one.  
To AV COMPU LINK (II, EX, or III)  
PB  
Y
V I D E O  
Caution ––  
Disconnect the mains plug to shut the power off  
completely. The STANDBY/ON button in any  
position does not disconnect the mains line. The power  
can be remote controlled.  
STANDBY/ON button!  
RIGHT  
• DVD-R/-RW written in the DVD VIDEO format  
CD-R/RW written in the SVCD, Video CD or Audio CD format  
• CD-R/RW written in MP3/JPEG in accordance with  
the “ISO 9660” format  
TV  
LEFT  
IDEO  
VIDEO  
VIDEO OUT  
PR  
AUDIO OUT  
INSTRUCTIONS  
Basic Connection  
The player  
To analog audio input  
®
S-video cable*  
(not supplied)  
TV  
• Set the player’s AV COMPU LINK setting as follows:  
– When connecting to the VIDEO-1 input terminal of  
the television: DVD2  
– When connecting to the VIDEO-2 input terminal of  
the television: DVD3  
Connecting to a digital audio device  
NOTES  
Supported Digital audio formats:  
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital  
Theater Systems)*  
To enjoy high-quality surround sound, connect the  
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS  
decoder or an amplifier with a built-in decoder.  
V I D E O  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
IN  
• Set the correct color system according to  
the color system your TV supports. (See  
“COLOUR SYSTEM” in “Initial settings.”)  
• If your TV has a monaural audio input  
instead of stereo, use an optional audio  
cable which converts stereo audio output  
to monaural.  
S-VIDEO  
2. CAUTION: Do not open the top cover. There are no  
user serviceable parts inside the unit; leave all  
servicing to qualified service personnel.  
3. CAUTION: Visible and invisible laser radiation when  
open and interlock failed or defeated. Avoid direct  
exposure to beam.  
VIDEO  
NOTES  
PB  
Y
COAXIAL  
• If a disc gets dirty, scratched or warped, or due to the  
disc characteristics or recording conditions, the  
player may not be able to play back such discs.  
• The player can play back audio signals recorded in  
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.  
• With some discs, operations may not be possible.  
* To play back DTS-encoded DVD VIDEO or DTS-  
encoded Audio CD discs correctly, connect the  
player to an amplifier with a built-in DTS decoder.  
Otherwise, playback sound will be distorted.  
L
E
EX. 2  
GNT0059-017A[AG/AH/AX/AS/UM/AA]  
0205MOC-MW-SC  
©2005 Victor Company of Japan, Limited  
PCM/STREAM  
F
T
RIGHT  
AU  
DIO  
EN  
To AV COMPU LINK  
(II, EX, or III)  
To AV  
COMPU LINK  
RI  
G
LEFT  
S-VEO  
VIDEO  
VIDEO OUT  
PR  
H
T
DIGITAL OUT  
AUDIOOUT  
Avoid moisture, water, dust, and high temperatures  
• Do not place the player in moist or dusty places.  
• If water gets inside the player, turn off the power and  
remove the plug from the wall outlet, then consult  
your dealer. Using the player in this state may cause  
a fire or electrical shock.  
To analog  
• If your TV is a HDTV or HD-ready TV, you  
can connect with component (Y, PB, PR)  
jacks. By connecting with component (Y,  
PB, PR) jacks, you can select the  
progressive scanning mode which provides  
the best picture quality.  
* The S-VIDEO jack and the component (Y,  
PB, PR) jacks cannot be used at the same  
time.  
Region code of DVD VIDEO  
audio input  
4. REPRODUCTION OF LABEL: CAUTION LABEL,  
PLACED INSIDE THE UNIT.  
TV  
This player can play back DVD VIDEO discs  
whose region code numbers include the player’s  
Region Code, which is indicated on the region  
code symbol on the rear panel.  
P
The player  
VCR  
C
COA  
M
/
S
X
IAL  
TREAM  
The player  
PR  
To digital audio input  
DIGITA  
Yellow  
• Set the VCR’s Remote Control Code and the player’s  
AV COMPU LINK setting as follows:  
– When connecting to the VIDEO-1 input terminal of  
the television:  
The player’s AV COMPU LINK setting: DVD2  
VCR’s Remote Control Code: B  
– When connecting to the VIDEO-2 input terminal of  
the television:  
Examples of playable DVD VIDEO discs:  
• Do not expose the player to direct sunlight or place it  
near a heating device.  
S-  
VIDEO  
L
OUT  
RI  
GH  
VID
VIDEO UT  
T
NOTES  
PB  
Audio/video  
cable*  
(supplied)  
Unplayable discs  
L
EF  
T
• Depending on the disc, no signal may be outputted  
from the DIGITAL OUT. Make an analog connection  
in this case.  
1 2  
3 4  
1 2 3  
4 5 6  
AUDIO OUT  
CAUTION:  
Notes on installation  
• Select a place which is level, dry and neither too hot  
nor too cold between 5˚C and 35˚C.  
• Leave sufficient distance between the player and the TV.  
• Do not install the player in a place subject to vibrations.  
• Do not put heavy objects on the player.  
ALL  
If you try to play back discs listed below, noise may be  
generated and causes damage to speakers.  
• DVD-RW written in the VR format  
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,  
PHOTO CD, SACD  
2 5  
2
AV  
CO  
MP  
• Do not block the ventilation openings or holes. (If the  
ventilation openings or holes are blocked by a  
newspaper or cloth, etc., the heat may not be able to  
get out.)  
• Do not place any naked flame sources, such as  
lighted candles, on the apparatus.  
• When discarding batteries, environmental problems  
must be considered and local rules or laws  
governing the disposal of these batteries must be  
followed strictly.  
• Do not expose this apparatus to rain, moisture,  
dripping or splashing and that no objects filled with  
liquids, such as vases, shall be placed on the  
apparatus.  
U
LI  
NK  
When using the S-VIDEO jack, do not  
connect the component (Y, PB, PR) jacks  
with the player.  
White  
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]  
preference display correctly according to the  
connected digital audio equipment. (See “DIGITAL  
AUDIO OUTPUT” in “Initial settings.”)  
The player’s region code is printed on the rear of  
the player  
Red  
Note of Color system format  
• Unfinalized discs  
The player’s AV COMPU LINK setting: DVD3  
VCR’s Remote Control Code: A  
This player is compatible with the PAL and NTSC  
systems. Select the correct color system for your  
TV (see “Initial settings”).  
Connecting to a TV with component jacks  
About the scanning mode indicator  
• Discs of irregular shape or discs with tape, seals or  
paste on either the label side or playback side.  
Playing back these discs may damage the player.  
To prevent malfunction of the player  
• There are no user-serviceable parts inside. If anything goes  
wrong, unplug the power cord and consult your dealer.  
• Do not insert any metallic objects, such as wires,  
hairpins, coins, etc. into the player.  
• Do not block the vents. Blocking the vents may  
damage the player.  
[PICTURE SOURCE] of  
the PICTURE menu  
AUTO  
FILM  
VIDEO(NORMAL)/  
(ACTIVE)  
Source type of DVD VIDEO  
EX. 3  
Using the AV COMPU LINK system  
The AV COMPU LINK system allows you to enjoy video  
and/or audio by simply pressing Play on the source  
component (the component which plays back the video  
or audio, such as a DVD player or VCR). You  
do not even have to switch on power on the TV or  
receiver.  
Film source  
[DDP]  
Video source  
[P]  
To AV COMPU LINK  
(II, EX, or III)  
To AV  
COMPU LINK  
PB  
Supplied accessories  
RI
Y
[DDP]  
[DDP]  
OAXIAL  
REAM  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
If anything is missing, consult your dealer  
immediately.  
• Audio/video cable (Yellow/White/Red) (x 1)  
• Remote control (x 1)  
• R6(SUM-3)/AA(15F) battery (x 2)  
• AC power plug adaptor (x 1)  
(Only for Singapore)  
TV  
LE
[P]  
[P]  
S-VIDEO  
VIDEO  
VIDEO OUT  
PR  
AUDIO OUT  
OUT  
Receiver  
The player  
To component video input  
NOTE  
To clean the cabinet  
• Use a soft cloth. Follow the relevant instructions on  
the use of chemically-coated cloths.  
• Do not use benzene, thinner or other organic solvents and  
disinfectants. These may cause deformation or discoloring.  
Some progressive TV and High-Definition TV sets are  
not fully compatible with the player. To check the  
compatibility of your TV, contact your local JVC  
customer service center.  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire and to protect  
from damage, locate the apparatus as follows:  
• Set the player’s AV COMPU LINK setting to DVD1.  
To switch the scanning mode between Progressive and  
Interlace, press and hold VFP-I/P on the remote control  
for a few seconds.  
Connection and setup  
Notes for connection  
Using an AV COMPU LINK cable, connect the AV  
COMPU LINK terminals of each component to one  
another.  
• The player’s AV COMPU LINK setting is controlled  
using the OTHERS menu in the preference display.  
See “AV COMPULINK MODE” in “Initial settings.”  
• See also the instruction manual of the other device.  
• If you connect the player to a receiver via AV COMPU  
LINK in a system including a Dolby Digital decoder,  
some functions may not be performed automatically.  
• Connect the AUDIO OUT jacks of the player to the  
audio input jacks of a receiver indicating “DVD.”  
Otherwise, the system will not work correctly.  
Front:  
No obstructions and open spacing.  
NOTES  
Sides: No obstructions in 3 cm from the sides.  
• Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”  
correctly.  
Top:  
Back:  
No obstructions in 5 cm from the top.  
No obstructions in 15 cm from the back.  
• When using the component (Y, PB, PR) jacks, do not  
connect the S-VIDEO jack with the player.  
Bottom: No obstructions, place on the level surface.  
Spacing 15 cm or more  
Operation  
1. Turn on the main power of the television.  
2. Insert a disc (or tape) into the source component.  
3. Press 3 of the source component.  
The following actions are performed automatically:  
• Turning on the television and/or receiver.  
• Setting the source of the television to the external  
input (VIDEO-1 or VIDEO-2).  
XV-N320B/XV-N322S  
Front  
Wall or  
obstructions  
Stand height  
5 cm or more  
• Setting the source of the receiver to the component  
which has started playback.  
Floor  
1
2
3
4
Turning on the power  
Initial setup  
Basic Operations  
Advanced Operations  
When you turn on the player for the first time after  
purchase, the following message appears on the TV  
screen.  
Turning on and off the player  
Changing the display window  
contents  
Changing the language, sound  
Changing the picture tone (VFP)  
The VFP (Video Fine Processor)  
function allows you to adjust the  
picture character according to the type  
of programming, picture tone or  
personal preferences.  
Inserting the AC power plug  
and scene angle  
After all other connections have been made, insert the  
AC power plug to the wall outlet firmly.  
Insert a disc  
STANDBY/ON  
OPEN/  
Each time you press DISPLAY,  
the display window contents  
changes.  
Open/close the disc tray  
CLOSE  
1 Press the button.  
STANDBY/ON  
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO  
SETTING  
YES - PRESS ENTER NO - PRESS CANCEL  
OPEN/  
1 Press 0 to open the disc tray.  
CLOSE  
2 Press the button repeatedly or  
2 Place a disc in the disc tray.  
• To insert an 8-cm disc, place it in the inner  
recess.  
3 Press 0 to close the disc tray.  
+
SLOW  
DISPLAY ON SCREEN  
Turning on and off the player  
Installing the batteries in the remote control  
Open the compartment cover, and place the two  
supplied R6(SUM-3)/AA(15F) batteries in the remote  
control according to the polarity markings (“+” and “–”)  
inside the compartment. Then replace the cover.  
5/to select the desired item.  
3 Press ENTER to finish the  
setting.  
Basic playback  
+
SLOW  
DISPLAY ON SCREEN  
TOP  
MENU  
THUMBNAIL/  
LIST  
Before enjoying this player, make the initial settings as  
follows:  
Buttons To do  
TOP  
MENU  
THUMBNAIL/  
LIST  
Locating the beginning of a scene  
or song  
1 Press VFP-I/P.  
2 Press 2/3 to select the desired  
3* Start/resume normal Playback  
Buttons  
To do  
ENTER  
1 Press ENTER.  
preset.  
You can select a title/chapter/  
track directly and start playback.  
For DVD Video:  
(While stopped) select title.  
(While playing back) select  
chapter.  
ENTER  
7
Stop  
AUDIO  
For DVD Video:  
select audio languages.  
For SVCD/VCD:  
select the audio  
channel.  
• When RESUME is ON or DISC  
RESUME, this player memorizes  
the position on the disc where  
you interrupted playback.  
– To resume playback, press 3.  
– To stop playback completely,  
press 7 again.  
DVD PLAYER SETUP  
Selected  
Preset  
MENU  
SET UP  
NEXT  
USER 1  
MENU  
SET UP  
NEXT  
MENU LANGUAGE  
ENGLISH  
PREVIOUS SELECT  
GAMMA  
MID  
PREVIOUS SELECT  
AUDIO LANGUAGE  
ENGLISH  
BRIGHTNESS  
CONTRAST  
+
4
CLEAR  
SUBTITLE  
ENGLISH  
+10  
CLEAR  
ON SCREEN LANGUAGE  
ENGLISH  
ENGLISH  
SATURATION +10  
SUBTITLE select the subtitle.  
ANGLE select the view-angle.  
For SVCD/VCD/CD:  
Select track.  
CHINESE  
SPANISH  
1
4
2
5
8
0
3
6
TINT  
+10  
1
4
2
5
8
0
3
6
SHARPNESS  
Y DELAY  
LOW  
To select 5: press 5.  
8*  
Pause  
2 Press 5/to select the on-screen language for  
+
2
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
• If you press TITLE/GROUP  
before entering the number, you  
can select the title instead of the  
chapter.  
• Each time you press 8 on the  
remote control, the still picture  
advances to the next frame.  
7
9
the preference displays, etc., then press ENTER.  
CANCEL  
RETURN  
7
9
Parameter  
Changing the Sound Field  
CANCEL  
RETURN  
DVD PLAYER SETUP  
NORMAL For watching TV in a general  
TITLE/  
GROUP  
SOUND  
EFFECT  
Each time you press SOUND  
EFFECT, the Sound Effect mode  
changes.  
• As the value becomes bigger, the  
Sound Effect works stronger.  
MONITOR TYPE  
PICTURE SOURCE  
SCREEN SAVER  
COLOUR SYSTEM  
BACKGROUND  
4:3 L.B.  
16:9  
4:3 LB  
room.  
VFP DIMMER  
I/P  
¡/1 Fast forward/backward  
(While paused)  
TITLE/  
GROUP  
SOUND  
EFFECT  
VFP DIMMER  
I/P  
CINEMA For watching a movie  
software in a room with  
suppressed light.  
4:3 PS  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
Slow-motion playback  
PAL  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
The batteries will last about six months with normal use.  
If the functions of the remote control become erratic,  
replace the batteries.  
• Each time you press the button,  
STANDARD  
Using the disc menu  
the playback speed changes.  
USER1 You can adjust parameters  
USER2 that affect the picture  
character and store the  
settings as a user preset.  
See below.  
With the label side up  
You can operate a disc—SVCD/  
VCD with Playback Control*  
(PBC)—using the disc menu  
shown on the TV screen.  
* A method of controlling disc play  
for SVCD/VCD by using the disc  
menu.  
¢/4 Skip chapter/track  
3 Press 5/to select the monitor type, then press  
ENTER.  
• If you press and hold the button  
during playback, playback is  
advanced/reversed at 5 times  
normal speed.  
Precautions of the safe use of batteries  
Observe the following precautions for the safe use of  
batteries. If they are used improperly their lives will be  
shortened, they may burst or their contents may leak.  
• Remove the batteries from the remote control if it is  
not going to be used for a long period of time.  
• Remove dead batteries and dispose of them  
properly.  
• Never leave dead batteries lying around, take them  
apart, mix them with other refuse, or throw them into  
an incinerator.  
• Never touch liquid that has leaked out of a battery.  
• Do not mix new and old batteries, or batteries of  
different types, when placing them.  
• For a normal (conventional) TV, select “4:3 LB” or  
“4:3 PS.(See “MONITOR TYPE” in “Initial  
settings.”)  
Zooming the picture  
To adjust the picture tone  
Each time you press ZOOM, the  
magnification changes.  
Point toward the remote sensor directly as possible  
(the operating range is approx. 5 m.)  
• For a wide-screen TV, select “16:9.”  
VARIABLE (For DVD Video)  
1 Select “USER1” or “USER2.”  
2 Press 5/to select a parameter, then press ENTER.  
PLAYBACK The disc is played back at about  
/VARI-PLAY 1.2 or 1.5 times (FAST)/0.8 or 0.6  
times (SLOW) normal speed.  
The sound is not muted, and the  
subtitle does not go off (except for  
DTS).  
• You can use 5//2/3 button to  
DVD PLAYER SETUP  
7 For DVD  
move the zoomed position.  
DIGITAL AUDIO OUTPUT  
ANALOG DOWNMIX  
D.RANGE CONTROL  
OUTPUT LEVEL  
DOLBY DIGITAL/PCM  
PCM ONLY  
GAMMA  
Adjust this if the neutral color is bright or dark. The  
brightness of dark and bright portion is maintained  
(LOW/MID/HIGH).  
1 Press TOP MENU or MENU to show the disc menu.  
2 Press 5//2/3 to select a desired item, then press  
To return to the normal playback,  
select the normal size by pressing  
ZOOM repeatedly.  
About On-screen guide icons  
DOLBY DIGITAL/PCM  
STREAM/PCM  
: Playback.  
ENTER or 3 (SELECT).  
STANDARD  
• With some discs, you can also select items by entering the  
number using the numeric buttons.  
BRIGHTNESS Adjust this if the picture is bright or dark on the  
: Pause.  
(For SVCD/VCD)  
whole (–16 (darkest) to +16 (brightest)).  
/
: Slow-motion playback with the current  
speed.  
Main display  
7 For SVCD/VCD  
The disc is played back at about 2  
times (FAST)/0.5 times (SLOW)  
normal speed.  
CONTRAST Adjust this if the far and near position is unnatural  
4 Press 5/to select a desired digital output  
signal type, then press ENTER.  
• Each indicator lights up when corresponding  
function/mode is activated, or corresponding  
information is on the main display.  
1 While stopped, press TOP MENU or 3 (SELECT) to  
(–12 to +12).  
show the menu.  
/
: Fast forward/backward playback with the  
current speed.  
Set this item correctly according to the logo on your  
receiver or decoder.  
(If you do not connect the player to such a device,  
press ENTER to finish the setting.)  
• Receiver/decoder bearing Dolby Digital logo and  
no DTS, select “DOLBY DIGITAL/PCM.”  
• Receiver/decoder bearing both Dolby Digital and  
DTS logos, select “STREAM/PCM.”  
• Receiver/decoder bearing neither Dolby Digital nor  
DTS logo, or digital recorder, select “PCM ONLY.”  
Turning on and off the player  
2 Press the numeric buttons to select a desired item.  
To select 5: press 5.  
SATURATION Adjust this if the picture is whitish or blackish  
(Only for DVD Video)  
Press  
STANDBY/ON.  
(–16 (blackest) to +16 (whitest)).  
The playback position moves  
back 10 seconds before the  
current position (only within the  
same title).  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
: At the beginning of a scene containing multi-  
angle views.  
TINT  
Adjust this if the appearance of flesh tone is  
unnatural (–16 to +16).  
• To move to the next or previous page of the current menu,  
press ¢ or 4.  
: At the beginning of a scene containing multi-  
audio sounds.  
SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).  
*
38 on the player starts/pauses playback.  
• To return to the previous menu, press RETURN.  
Y DELAY  
Adjust this if the picture looks separately/  
overlapped (–2 to +2).  
: At the beginning of a scene containing multi-  
subtitles.  
You can change the setting so that the on-screen  
guide icons do not appear on the TV screen. (See  
“ON SCREEN GUIDE” in “Initial settings.”)  
To play back without PBC  
While stopped, press the numeric buttons instead of 3  
(SELECT) to start playback.  
To reactivate PBC  
Changing the display brightness  
3 Press 5/to adjust the parameter, then press ENTER.  
4 Repeat step 2 and 3 to adjust other parameters.  
5 Press VFP-I/P to finish the setting.  
To bring up the DVD PLAYER SETUP display later  
Press SET UP for a few seconds until the DVD PLAYER  
SETUP display appears.  
Press DIMMER to change the brightness of  
the display window.  
• Press TOP MENU or MENU.  
• Press 7 to stop playback, then 3 (SELECT).  
5
6
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Marine Sanitation System 67343 User Manual
Intel Chipper PXA250 and PXA210 User Manual
Intel Plumbing Product EE110EM User Manual
Jaguar GPS Receiver JLM10 31 99 552 User Manual
JBL Speaker EONSUB G2 User Manual
JL Audio Car Speaker 011180 User Manual
John Deere Home Safety Product UB18D User Manual
John Lewis Microwave Oven JLBIOS607 User Manual
JVC Stereo System XL FZ700BK User Manual
Konica Minolta Printer IC 205 User Manual