'9'ꢀ9,'(2ꢀ3/$<(5
Introduction
2
;9ꢁ0ꢂꢃ%.ꢄ;9ꢁ0ꢂꢅ6/
Preliminary knowledge
Getting started
5
13
20
24
39
46
Basic operations
Advanced operations
Initial settings
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
DISC
DISC
DISC
3
2
1
0
0
0
3
2
1
DISC3
DISC2
DISC1
STAND/BY
PLAY
&
EXCHANGE
DVD VIDEO CD CD
10-bit/27MHz VIDEO D/A CONVERTER
SELECT
/
/
STANDBY/ON
3
XV-M50 DVD/CD PLAYER
+
CH
5
ENTER
∞
VOL
-
VOL
+
DISC TITLE CHAP
RESUME THEATER
SKIP
STOP
PLAY
PAUSE
4
¢
DVD
EACH
DOLBY
7
3
8
D
I
G
I
T
A
L
-
CH
RM-SXVM50J REMOTE CONTROL
Additional information
,16758&7,216
)RUꢀ&XVWRPHUꢀ8VHꢆ
(QWHUꢀEHORZꢀWKHꢀ0RGHOꢀ1RꢁꢀDQGꢀ6HULDOꢀ1Rꢁꢀ
ZKLꢂKꢀDUHꢀORꢂDWHGꢀRQꢀWKHꢀUHDUꢃꢀERWWRPꢀRUꢀ
VLGHꢀRIꢀWKHꢀꢂDELQHWꢁꢀ5HWDLQꢀWKLVꢀLQIRUPDWLRQꢀ
IRUꢀIXWXUHꢀUHIHUHQꢂHꢁ
0RGHOꢀ1Rꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
6HULDOꢀ1Rꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
/(7ꢄꢅꢆꢇꢈꢄꢄꢉ$
>%@
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
To locate a desired selection using 4 or ¢ ...................25
To locate a desired scene by specifying the chapter
Introduction
Page 2
number [CHAP.SEARCH] ...................................................26
To locate a desired position in the current title or track
[TIME SEARCH]...................................................................26
To locate a desired scene from the display [DIGEST] ........27
Special picture playback................................................. 28
To advance a still picture frame-by-frame...........................28
To display continuous still pictures [STROBE]....................28
To playback in slow-motion [SLOW]....................................29
To zoom a scene [ZOOM]......................................................29
Changing the playback order ......................................... 30
To playback in the desired order [PROGRAM]....................30
To playback in random order [RANDOM]...........................31
Repeat playback............................................................... 31
To repeat the current selection or all discs contents
Features...............................................................................2
Supplied accessories..........................................................2
About this instruction manual ..........................................3
Notes on handling..............................................................4
Preliminary knowledge
Page 5
Names of parts and controls.............................................5
Front panel................................................................................5
Remote control unit .................................................................6
Display window........................................................................8
Rear panel.................................................................................8
Operational Principles........................................................9
On-screen displays...................................................................9
To prevent the monitor from burning out
[REPEAT] .............................................................................31
To repeat a desired part [A-B REPEAT]................................32
Selecting a scene angle of DVD VIDEO ......................... 33
To select a scene angle from the normal screen
[SCREEN SAVER]................................................................10
On-screen guide icons...........................................................11
How to use numeric buttons.................................................11
About discs .......................................................................12
Playable disc types.................................................................12
Disc structure..........................................................................12
[ANGLE]...............................................................................33
To select a scene angle from the angle list display
[ANGLE]...............................................................................34
Changing the language and sound................................ 34
To select the subtitle language [SUBTITLE] ........................34
To change the audio language or sound [AUDIO]..............35
Selecting the picture character...................................... 36
To select the picture character [THEATER POSITION]........36
Enjoying virtual surround sound.................................... 36
To simulate surround sound [3D PHONIC]..........................36
Checking the status......................................................... 37
To check the disc/time information......................................37
To check the DVD function status.........................................38
To dim, the brightness of the display window............. 38
Dimming the brightness of the display window.................38
Getting started
Page 13
Connections......................................................................13
Before making any connections ...........................................13
To connect to a TV .................................................................13
To connect to a TV with the SCART connector ...................14
To connect to an audio amplifier or receiver.......................15
To connect to audio equipment with a digital input...........16
To connect the power cord ...................................................16
Using the remote control unit.........................................17
To install batteries in the remote control unit .....................17
To use the remote control unit for TV operation.................18
Initial settings
Page 39
Basic operations
Page 20
Selecting preferences...................................................... 39
How to set preferences..........................................................39
LANGUAGE page...................................................................39
AUDIO page............................................................................40
DISPLAY page ........................................................................41
SYSTEM page ........................................................................42
Limiting playback by children ........................................ 43
To set Parental Lock for the first time
Turning on/off the unit ....................................................20
Inserting and removing discs..........................................20
Basic playback ..................................................................21
To start playback....................................................................21
To stop playback completely ................................................21
To stop playback temporarily ...............................................21
To advance or reverse playback rapidly
while monitoring.................................................................22
To locate the beginning of the scene or song .....................22
Resuming playback..........................................................22
To memorize the interrupted position .................................22
To resume playback...............................................................23
[PARENTAL LOCK]..............................................................43
To change the settings [PARENTAL LOCK] ........................44
To temporarily release the Parental lock
[PARENTAL LOCK] .............................................................45
Additional information
Page 46
Advanced operations
Page 24
Care and handling of discs.............................................. 46
Troubleshooting .............................................................. 47
Specifications................................................................... 48
Table of languages and their abbreviations.. Appendix A
Country code list for parental lock..................Appendix B
Playing from a specific position on a disc......................24
To locate a desired scene from the DVD menu...................24
To locate a desired scene from the menu of the
Video CD with PBC..............................................................24
To locate a desired selection using the numeric buttons...25
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Features
Supplied accessories
• Audio/video cable (x 1)
Picture functions
7Strobe function
The unit can display nine continuous still pictures on
the TV screen.
7Digest function
• Remote Control Unit (x 1)
You can select the desired selection to be played from
the opening scenes displayed on the TV screen.
P
LA
O
E
S
EL IS
C
D
M
Y
E
C
D
T
1 T
1
V
3
P
HO
D
N
S
4 T
V
T
V
BY/O
T
V
TA
N
IC
D
T
V
C
TV
/VID
7
-/
7
T
2
AN
N
10TV
D
V
2
C
E
E
O
L
D
V
D
D
N
5 TV
V
5
A
T
R
E
GL
E
T
TU
7Angle function*
D
8
R
N
IG
S
T
V
3
E
U
B
TV
P
S
3
R
T
0
0
6 T
V6
E
ITL
V
IO
4
E
US
T
V
9
C
A
D
IO
L
E
9
M
U
10TI
A
+
7
T
H
E
A
P
SL
O
1W
S
E
O
S
ITION
R
L
E
Z
O
O
M
–
C
T
3
T
IT
L
N
E
X
T
E
You can select a desired angle from multiple camera
angles recorded on the DVD VIDEO disc.
V
O
¢
L
S
T
R
O
8
S
B
E
C
H
L
+
O
W
¡
+
CH
E
N
M
O
T
E
E
IC
N
R
E
U
C
5
H
O
L
+
R
M
-
S
X
D
I
V
M
5
L
A
Y
0
J
R
E
M
O
T
E
C
O
N
T
R
O
L
7Zoom function
You can view scenes close-up.
7Parental lock*
You can restrict the playback of DVD VIDEO discs with
scenes which you do not want children to see, such as
adult or violent films.
• R6P(SUM-3)/AA(15F) batteries (x 2)
7Theater position
You can select the picture character according to the
lighting of your room.
• Instruction manual (x 1)
Audio functions
7High quality digital sound
You can enjoy high quality sound with Dolby Digital or
Linear-PCM.
7Surround function*
The unit accommodates the Dolby Digital, DTS and
MPEG Multichanel surround systems.
(These surround signals are output only from the
DIGITAL OUT jacks.)
73D Phonic function
• AC power cord (x 1)
You can enjoy surround sound with your 2-channel
system.
Other functions
7Triple disc trays
You can insert up to three discs in the unit and can
playback them continuously.
7Multi-language subtitles and sound*
You can select a subtitle or sound language from
those recorded on the DVD VIDEO disc.
7Multi-disc playback
You can enjoy Audio CD discs and Video CD discs, as
well as DVD VIDEO discs.
7Operation from the on-screen display
User-friendly on-screen displays allow you to operate
the unit easily.
Functions with (*) mark only work on a DVD VIDEO disc
that is compatible with each function.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About this instruction manual
This instruction manual basically explains operations as follows:
To playback in random order
[RANDOM]
You can play titles or tracks on discs inserted in random
order by using the Random function.
These symbols
indicate the types
of discs which the
operation can be
used for.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
1
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
3
CH+
5
VOL
-
VOL
+
ENTER
∞
-
CH
The number
indicates the
2
RM-SXVM50J REMOTE CONTROL
following procedural
step(s) in which the
button(s) is(are)
used.
You may also use the
corresponding
buttons on the front
panel of the unit if
available.
7While stopped
1Press PLAY MODE.
The play mode menu appears on the TV screen.
The number
indicates the
procedural step.
2Use CURSOR 2/3to move
to
[RANDOM].
REPEAT
PROGRAM
RANDOM
The names of buttons
on the remote control
unit (or on the front
panel of the unit) are
all given in uppercase
letters.
3Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the display
window on the front panel. After playing all titles/
tracks of the discs, random playback ends.
Other convenient
procedures, etc.
•
The same title or track will not be played back more than
once during random play.
•
To stop/quit random playback in the middle
Press 7to stop playback. The unit is still in random
playback mode, so pressing 3starts random playback
again.
To quit random playback, press 7again while stopped.
The “RANDOM” indicator in the display window turns
off.
NOTE
Some DVD VIDEO discs may not be played back
correctly in the random mode.
Additional
supplemental
remarks
•
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on handling
Important cautions
Installation of the unit
Safety precautions
Avoid moisture, water and dust
• Select a place which is level, dry and neither too hot
nor too cold (between 5oC and 35oC, 41oF and 95oF).
• Leave sufficient distance between the unit and the TV.
• Do not use the player in a place subject to vibrations.
Do not place the unit in moist or dusty places.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it near
a heating device.
Power cord
When you’re away
When away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet.
• Do not handle the power cord with wet hands!
• A small amount of power (3.1 W) is always consumed
while the power cord is connected to the wall outlet.
• When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
Do not insert foreign objects into the unit
Do not insert wires, hairpins, coins, etc. into the unit.
To prevent malfunction of the unit
Do not block the vents
Blocking the vents may damage the unit.
• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
Care of the cabinet
• Do not insert any metallic object into the unit.
• Do not use any non-standard shape disc available on
the market, because it may damage the unit.
• Do not use a disc with tape, seals, or paste on it,
because damage to the unit may result.
When cleaning the unit, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents and disinfectants. These may cause
deformation or discoloring.
Note about copyright laws
If water gets inside the unit
• Please check the copyright laws in your country before
recording from DVD VIDEO, Audio CD, and Video CD
discs. Recording of copyrighted material may infringe
copyright laws.
Turn off the power switch and remove the plug from the
wall outlet, then call the store where you made your
purchase. Using the unit in this state may cause a fire or
electrical shock.
Note about the copyguard system
• The DVD VIDEO disc is protected by the copyguard
system. When you connect the unit to your VCR
directly, the copyguard system activates and the
picture may not be played back correctly.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby
Laboratories.
Confidential Unpublished Works.
© 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. “DTS”, “DTS Digital Surround”, are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All Rights Reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
4
0(OPEN/CLOSE) buttons
1 STANDBY indicator
5
DISC 1 through
DISC 3 buttons
with indicators
3
DISC 1 through
DISC 3 trays
2 STANDBY/ON
button
DISC
3
2
1
0
0
0
3
2
1
DISC3
DISC2
DISC1
STANDBY
DISC
DISC
PLAY
&
EXCHANGE
DVD VIDEO CD CD
STANDBY/ON
/
/
10-bit/27MHz VIDEO D/A CONVERTER
XV-M50 DVD/CD PLAYER
DISC TITLE CHAP
RESUME THEATER
STOP
PLAY
PAUSE
SKIP
4
¢
DVD
EACH
DOLBY
7
3
8
D
I
G
I
T
A
L
7 Display window
- 8(PAUSE) button
6
Remote sensor
0 3(PLAY) button
9 7(STOP) button
8 4/¢(SKIP) buttons
1 STANDBY indicator
7 Display window (8)
Lights when the power cord is connected and the unit
is on standby. When the unit is turned on, the STANDBY
indicator goes off.
Indicates the current status of the unit.
8 4/¢(SKIP) buttons (22)
Used to skip a chapter, title or track.
Also, used for the page selection of a menu screen
(for Video CD).
2 STANDBY/ON
button (20)
Turns the unit on or off (standby).
Holding down 4or ¢during playback reverses or
advances playback rapidly.
3 DISC 1 through DISC 3 trays (20)
Used to load discs. To insert/remove a disc, press the
9 7(STOP) button (21)
0(OPEN/CLOSE) button.
Stops blayback.
Also used to change the video output setting (See page
14).
4 0 (OPEN/CLOSE) buttons (20)
Used to open and close the corresponding disc trays
(1 to 3).
0 3(PLAY) button (21)
5 DISC 1 through DISC 3 buttons with indicators
Used to start playback of the disc in the corresponding
tray with the number indicated on the button. While
playing, the corresponding indicator blinks.
Starts playback. Also, used as a SELECT button for PBC of
Video CDs.
- 8(PAUSE) button (21, 28)
Pauses playback.
6 Remote sensor
Also, used to display nine continuous still pictures
(STROBE function).
Receives signals from the remote control unit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Remote control unit
! Infrared signal-emitting
window
@ TV STANDBY/ON
button
TV
DVD
# TV - DVD switch
1 DISC SELECT button
STANDBY/ON
DISC
SELECT
$ DVD STANDBY/ON
TV
DVD
button
PLAY
3D
TV/VIDEO
% RETURN button
2 PLAY MODE button
3 3D PHONIC button
MODE
PHONIC CANCEL RETURN
^ TV/VIDEO - CANCEL
TV1
TV2
TV3
button
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
4 Numeric buttons
9
TV-/--
10
TV0
0
MUTING
& THEATER POSITION
+
10
button
THEATER
5 ANGLE button
POSITION
ANGLE SUBTITLE AUDIO
* AUDIO button
( ZOOM button
6 SUBTITLE button
DIGEST
ZOOM
7 DIGEST button
) ¢/NEXT button
_ 8/STROBE button
+ 3/SELECT button
8 4/PREVIOUS button
SELECT
3
9 7/CLEAR button
0 1/SLOW– button
¡ ¡/SLOW+ button
™ MENU button
+
CH
- TITLE button
5
ENTER
∞
VOL
-
VOL
+
£ ENTER button
= CURSOR (5 UP,
∞ DOWN) - CH (+/–)
buttons
¢ CURSOR (2 LEFT,
3 RIGHT) - VOL (+/–)
buttons
-
CH
~ CHOICE button
¢ DISPLAY button
RM-SXVM50J REMOTE CONTROL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
1 DISC SELECT button (21)
@ TV STANDBY/ON
button (18)
By pressing this button followed by the appropriate
numeric button (among 1 through 3),you can select a disc
to be played.
Turns the television on or off (standby).
# TV - DVD switch (11, 18, 24)
Selects the function of the numeric buttons to control the
2 PLAY MODE button (26, 30, 31, 32)
Displays an on-screen display for controlling the
advanced playback functions.
corresponding device.
$ DVD STANDBY/ON
button (20)
Turns the unit on or off (standby).
3 3D PHONIC button (36)
% RETURN button (25)
Produces a simulated surround effect.
Returns to the previous menu (for DVD VIDEO/Video CD).
4 Numeric buttons (11)
^ TV/VIDEO - CANCEL button (18, 30)
When the TV - DVD switch is set to DVD, these buttons are
used to specify a disc, title, chapter or track number, as
well as used to enter a time for the Time search function.
When the TV - DVD switch is set to TV, these buttons are
used to select a TV channel as well as mute the TV audio.
When the TV - DVD switch is set to TV, this button
switches the TV input between TV and VIDEO.
When the TV - DVD switch is set to DVD, it cancels the last
programmed selection in the Program mode.
& THEATER POSITION button (36)
Selects a picture character from 4 options (for DVD
VIDEO/Video CD).
5 ANGLE button (33, 34)
Changes camera angles during playback of a DVD VIDEO
disc containing multiple camera angles.
* AUDIO button (35)
6 SUBTITLE button (34)
Selects the audio (for DVD VIDEO/Video CD).
Used to display the subtitle selection display on the TV
screen, as well as used to turn the subtitle on or off (for
DVD VIDEO).
( ZOOM button (29)
Zooms in the picture (for DVD VIDEO/Video CD).
) ¢/NEXT button (22, 25)
7 DIGEST button (27)
Skips forward a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
Holding down this button during playback advances
playback rapidly.
Displays beginning scenes of each title, chapter or track
on the TV screen (for DVD VIDEO/Video CD).
8 4/PREVIOUS button (22, 25)
Skips back a chapter, title or track. Also used for the page
selection of a menu screen (for DVD VIDEO/Video CD).
Holding down this button during playback reverses
playback rapidly.
_ 8/STROBE button (21, 28)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
9 7/CLEAR button (21, 30)
+ 3/SELECT button (21, 24)
Starts playback. Also used as a SELECT button for PBC of
Video CDs.
Stops playback. Also used to erase all the programmed
tracks for the program play.
0 1/SLOW– button (22, 29)
¡ ¡/SLOW+ button (22, 29)
Pressing this button during playback reverses playback
rapidly.
Pressing this button while a DVD VIDEO disc is paused
reverses playback slowly.
Pressing this button during playback advances playback
rapidly.
Pressing this button while a DVD VIDEO or Video CD disc
is paused advances playback slowly.
- TITLE button (24)
Displays the title menu of a DVD VIDEO disc on the TV
screen.
MENU button (24)
Displays a DVD menu on the TV screen.
£ ENTER button
= CURSOR (5UP, ∞DOWN) - CH (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons are
used to select an item from a menu or on-screen display,
or to change the setting of an on-screen display item.
When the TV - DVD switch is set to TV,they are used to
select a TV channel.
Executes the selected item in a menu or on-screen
display.
¢ CURSOR (2 LEFT, 3RIGHT) - VOL (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons are
used to select an item from a menu or on-screen display,
or to change the setting of an on-screen display item.
When the TV - DVD switch is set to TV, they are used to
change the TV audio volume.
~ CHOICE button (39)
Displays the preference on-screen display on the TV
screen.
! Infrared signal-emitting window
DISPLAY button (37)
Displays the status information (only for DVD disc) or the
Point this window toward the remote sensor on the front
panel when pressing buttons.
time information (for any types of discs).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Display window
1 Disc number indicator
Shows the disc number being selected.
4 Disc indicators
5 Function indicators
2 Title/chapter/track indicators
Displays title/chapter, or track number.
3 Time display
3D-PHONIC
PROGRAM RANDOM REPEAT 1A-B
RESUME THEATER
Shows the cumulative or remaining time of the track
or disc, or the total disc time.
DISC TITLE CHAP.
TRACK
DVD VCD
4 Disc indicators
EACH
REMAIN
Indicator the type of the disc set in the selected tray.
When a DVD VIDEO or Video CD disc is set, “DVD” or
“VCD” is indicated. When an Audio CD is set, there is
no indication.
3Time display
2Title/chapter/
track indicators
1 Disc number indicator
5 Function indicators
Active functions light up.
Rear panel
1 VIDEO OUT - VIDEO jack
2 VIDEO OUT - S-VIDEO jack
3 AV OUT jacks with COMP. - Y/C switch
4 Region code label
VIDEO OUT
VIDEO S-VIDEO
AV OUT
1
AV
COMP.
Y/C
AC IN
AV COMPU LINK
AUDIO OUT
DIGITAL OUT
PCM / STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
7 DIGITAL OUT jack(s) (COAXIAL/OPTICAL)
6 AUDIO OUT jacks (LEFT/RIGHT)
5 AV COMPU LINK jacks
8
AC IN connector
1 VIDEO OUT - VIDEO jack (13)
4 Region code label (12)
Outputs a composite video signal.
Shows region code number.
2 VIDEO OUT - S-VIDEO jack (13)
5 AV COMPU LINK jacks
Outputs an S-video signal.
These jacks are provided for use in the future. They are
Note that this jack does not feed correct signals when you
make the unit feed RGB signals. See “How to make the
unit feed the RGB signals” on page 14 for details.
currently not used.
6 AUDIO OUT jacks (LEFT/RIGHT) (13, 15)
Outputs stereo analog audio signals.
3 AV OUT with COMP. - Y/C switch(14)
7 DIGITAL OUT jack(s) (COAXIAL/OPTICAL) (16)
Outputs digital audio signals. You must select the signal
type correctly according to the external device connected
to via the Preference display.
The standard 21-pin SCART connector outputs video and
audio signals. You can select the video signal type by the
COMP.-Y/C selector, as well as the S-VIDEO/RGB setting
(see “To connect to a TV with the SCART connector” on
page 14 for details).
8
AC IN connector (16)
Connects to the wall outlet using the suppplied AC power
cord.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Operational Principles
On-screen displays
The unit provides several on-screen displays.
With some displays, you can set or select preferences or
functions, while the others are display-only.
Opening displays
The Opening display appears automatically in some
conditions.
Opening display
At the bottom, the following information are indicated
depending on the unit’s status.
• NOW READING: The unit is now reading the disc
information (TOC).
• REGION CODE ERROR!: The DVD VIDEO disc loaded
cannot be played because the region code of the disc
does not match the unit.
NOW READING
• CHANGE→DISC 1: The unit is now changing the disc
tray to DISC 1.
• OPEN: The disc tray is now opening.
• CLOSE: The disc tray is now closing.
LANGUAGE
AUDIO
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
DIGITAL AUDIO OUTPUT
DOWN MIX
Preference displays
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
COMPRESSION
When no disk is inserted or when a DVD VIDEO or Video
CD disk is inserted and stopped, pressing the CHOICE
button brings up the preference display for setting the
preferences.
ON SCREEN LANGUAGE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
There are four pages: LANGUAGE, AUDIO, DISPLAY and
SYSTEM as shown on the right.
See page 39 for detailed information.
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
4:3 LB
MODE 2
ON
OFF
OFF
MONITOR TYPE
AUTO STANDBY
RESUME
AV COMPULINK MODE
SCREEN SAVER
DVD 1
ON SCREEN GUIDE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
PARENTAL LOCK
PARENTAL LOCK display
PARENTAL LOCK
When no disc is inserted or a DVD VIDEO disc is stopped,
pressing the ENTER button while holding down the
7button brings up the PARENTAL LOCK display in which
you can set the level for limiting playback.
GB
Country Code
Set Level
—
----
PASSWORD
EXIT
See page 43 for detailed information.
PRESS
KEY
ENTER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Play mode displays
Pressing the PLAY MODE button brings up the play
mode display in which you can control playback
functions.
While stopped
During DVD VIDEO playback
DVD CONTROL
REPEAT
PROGRAM
RANDOM
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
Different displays appear depending on the disc type and
the unit’s status.
During Audio CD playback
During Video CD playback
CD CONTROL
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH PBC CALL
Disc/time (DVD VIDEO)
DVD VIDEO function status
Status displays
Pressing the DISPLAY button during playback brings up
the status display.
1 / 2
1 / 2
1 / 2
Mbps
DISC
3
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
ENGLISH ENGLISH
For a DVD VIDEO disc, pressing the DISPLAY button
toggles between the DVD VIDEO function status display,
the disc/time display and off.
For a Video CD or Audio CD disc, pressing the DISPLAY
button switches the disc/time display on and off.
Disc/time (Audio CD/Video CD
without PBC)
Disc/time
(Video CD with PBC)
DISC 3TRACK 1TIME 00:08
EACH
DISC
3
TRACK
1
TIME
25:25 PBC
To prevent the monitor from burning out [SCREEN SAVER]
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
DVD/Video CD/CD PLAYER
• Pressing any button on the unit or the remote control
unit will release the screen saver function and return to
the previous display.
• You can select one of several screen saver modes
available (see page 41).
• The screen saver function is not activated during
Audio CD playback or after stopping Audio CD
playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
On-screen guide icons
During DVD VIDEO playback, you may see icons displayed over the picture. These have
the following meanings.
:
:
Displayed at the beginning of a scene recorded from multiple angles. (See page 33.)
Displayed at the beginning of a scene recorded with multiple audio languages. (See
page 35.)
:
Displayed at the beginning of a scene recorded with multiple subtitle languages. (See
page 34.)
You can set the unit not to display on-screen icons above via the preference settings
described on page 42.
About invalid operation icon
When you press a button, if the unit does not accept its operation,
television screen. Operations are occasionally unacceptable even if
appears on your
is not displayed.
Note that some operations may not be accepted. For example, some discs may not allow
rapid advance/reverse or slow-motion playback.
How to use numeric buttons
The function of the numeric buttons differs depending on the setting of the TV - DVD
switch. When setting it to TV, the buttons are used to select a TV channel (see page 18).
When setting it to DVD, the buttons are used to select a track/title/group or enter a disc
time or chapter number.
TV
DVD
To select a track/title number
TV1
TV2
TV3
•
To select a number between 1 and 10
1
2
3
TV4
TV5
TV6
Press the corresponding button for the number.
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
TV0
0
MUTING
•
To select a number higher than 10
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
Use the +10 button.
Examples:
To select 13
To select 34
To select 40
+10 → 3
+10 → +10 → +10 → 4
+10 → +10 → +10 → 10
To enter a time or chapter number
The method for entering a time for Time search or chapter number for Chapter search is
different from above. See the corresponding sections in this manual for the details.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
About discs
Playable disc types
Playable and non-playable disc types are as follows:
Playable discs
Audio CD
CD-R
CD-RW
DVD VIDEO
Video CD
The DVD VIDEO Logo is a trademark.
• CD-R and CD-RW discs recorded with the Audio CD format can be played back, though some may not be played back
because of the disc characteristics or recording condition.
• DVD VIDEO players and DVD discs have their own Region Code numbers. This unit only can play back DVD VIDEO
discs whose Region Code numbers include “2.”
Examples of playable DVD VIDEO discs:
2 3
4 5
1 2 3
4 5 6
ALL
2 5
2
This unit accommodates discs recorded with the PAL system.
Non-playable discs
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT
• Playing back discs listed as “Non-playable discs” above may generate noise and damage speakers.
• This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.
Disc structure
A DVD VIDEO disc is comprised of “titles,” while an Audio CD, Video CD is comprised of “tracks”. Each title may be
divided into some “chapters”. For example, if a DVD VIDEO disc contains some movies, each movie may have its own title
number, and each movie may be divided into some chapters. In a DVD VIDEO karaoke disc, each song usually has its own
title number and does not have chapters. In general, each title has independent content, while each chapter in the same
title has continuity.
(Example: DVD VIDEO disc)
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 1
Chapter 2
(Example: Audio CD/Video CD)
Track 1 Track 2
Track 3
Track 4
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
VIDEO OUT
AV OUT
VIDEO S-VO
AV
COMP.
Y/C
S-video cable
(not supplied)
AV COMPU LINK
AUDIO OUT
DIGITAL OUT
PCM
COAXIAL
/
STREAM
OPTICAL
LEFT
RIGHT
TV
IN
Yellow
S-VIDEO
White
VIDEO
LEFT
Yellow
White
Red
AUDIO
RIGHT
Red
Audio/Video cable
(supplied)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the optional S-video
cable in addition to the (standard) video connection to get better picture quality.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to a PAL television. Do not connect the unit to an NTSC television.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio
sound with better quality, connect the audio output to your audio equipment.
SCART cable
(not supplied)
The unit
VIDEO OUT
AV OUT
VIDEO S-VIDEO
AV
COMP.
Y/C
AV COMPU LINK
AUDIO OUT
DIGITAL OUT
PCM
COAXIAL
/
STREAM
OPTICAL
LEFT
RIGHT
TV
IN
AV
S-VIDEO
VIDEO
LEFT
IN
AUDIO
RIGHT
Set the COMP-Y/C switch correctly according to your TV.
• If the TV only accommodates the composite video signal, set the switch to “COMP.”.
• If the TV accommodates the Y/C signals, set the switch to “Y/C” so that you can enjoy better-quality pictures.
• If the TV accommodates the RGB signals, set the switch to “COMP.”, as well as make the unit feed the RGB signals by
following the procedure shown below.
How to make the unit feed the RGB signals
The unit cannot output the RGB signals from the SCART connector and the S-video (Y/C) signals from the S-VIDEO jack
simultaneously.
In the initial (factory-preset) condition, the S-VIDEO jack is active, while the RGB signals cannot be output.
To make the unit feed the RGB signals, follow the procedure below. Note that the S-VIDEO jack does not feed correct
signals when the unit is set to output the RGB signals.
7 When the unit is turned on
1 Set the COMP.-YC switch to “COMP.”.
2 Press and hold down the 7(STOP) button on the front panel when no disc is inserted or while the unit is stopped.
"S OUT" appears in the display window after a few seconds.
(Display window)
3D-PHONIC
PROGRAM RANDOM REPEAT 1A-B
RESUME THEATER
DISC TITLE CHAP.
TRACK
DVD VCD
EACH
REMAIN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
3 Keep holding down the 7(STOP) button on the front panel.
After a few more seconds, “R OUT” replaces “S OUT” in the display window.
Now the RGB signal can be output when setting the COMP. - Y/C switch to “COMP.”.
(Display window)
3D-PHONIC
PROGRAM RANDOM REPEAT 1A-B
RESUME THEATER
DISC TITLE CHAP.
TRACK
DVD VCD
EACH
REMAIN
• To make the S-VIDEO outputs, use the similar procedure.
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
The unit
VIDEO OUT
AV OUT
VIDEO
S-VIDEO
AV
COMP.
Y/C
AV COMPU LINK
AUDIO OUT
DIGITAL OUT
PCM
COAXIAL
/
STREAM
OPTICAL
LEFT
RIGHT
Amplifier or receiver
Red
White
IN
White
Red
LEFT
AUDIO
RIGHT
Audio cable
(not supplied)
•
Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL or COAXIAL) to the
digital input of an amplifier, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital, DTS or MPEG Multichannel decoder or an amplifier with a built-in
decoder by using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
When using the DIGITAL OUT (OPTICAL)
jack, remove the protection cap. Do not
lose the removed cap. When the DIGITAL
The unit
VIDEO OUT
AV OUT
OUT (OPTICAL) jack is not used, fix the
protection cap into the jack.
VIDEO
S-VIDEO
AV
COMP.
Y/C
AV COMPU LINK
AUDIO OUT
DIGITAL OUT
PCM
COAXIAL
/
STREAM
OPTICAL
LEFT
RIGHT
Optical digital cable
(not supplied)
Red
White
Coaxial digital cable
(not supplied)
Digital equipment
IN
IN
White
Red
OPTICAL
DIGITAL
COAXIAL
LEFT
AUDIO
RIGHT
Audio cable
(not supplied)
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”
setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
“DIGITAL AUDIO OUTPUT” on page 40.
• With the digital connection, the COMPRESSION setting in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
To connect the power cord
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY indicator lights and setup is completed.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other
accidents.
Warning
• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
• To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If the
cord is damaged, contact a dealer and get the new power cord.
Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Using the remote control unit
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV.
To install batteries in the remote control unit
The battery compartment is located on the back of the remote control unit.
1 Press down on the point shown by the arrow at the top of the compartment cover,
and pull up the cover to open the compartment.
2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control according
to the polarity markings (“+” and “–”) inside the compartment and on the batteries.
3 Place the cover over the compartment, and press down lightly.
• The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace
the batteries. See below for more information.
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened,
they may burst or their contents may leak.
Precaution
• Remove the batteries from the remote control if it is not going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types, when replacing them.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To use the remote control unit for TV operation
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
TV
DVD
TV - DVD switch
TV STANDBY/ON
STANDBY/ON
DISC
SELECT
TV
DVD
DVD STANDBY/ON
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
MODE
TV/VIDEO - CANCEL
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
Numeric buttons
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
RM-SXVM50J REMOTE CONTROL
1 Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below by using the numeric
buttons (0 to 9).
Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.
Example:
To enter the manufacturer code “01”: Press “0” then “1.”
2 Press 7 while holding down TV/VIDEO - CANCEL.
3 Try to operate your TV by pressing TV STANDBY/ON
.
If your TV turns on or off, you have successfully set the control signal.
Manufacturer code list
No. Manufacturer
No. Manufacturer
No. Manufacturer
01
02
03
04
05
06
07
08
09
10
11
12
13
14
JVC
15
16
17
18
19
20
21
22
23
24
25
26
27
28
GRADIENTE
SANYO
PHILCO/DAEWOO
LG (GOLDSTAR)
GRUNDIG
29
30
31
32
33
34
35
36
37
38
39
40
41
MIVAR
FINLUX
NOKIA
FUNAI
PHILIPS/CCE/MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
SAMSUNG
SAMSUNG/PEONY/CHANGHONG
NEC/GRADIENTE
PHILCO
SAMSUNG
AIWA
DAEWOO
JINXING/PEONY
PEONY
TOSHIBA
ZENITH
BEIJING/NOBLEX
JVC (ONWA)
JVC (ONWA)
JVC (ONWA)
THOMSON
FERGUSON
ITT
PHILCO/HITACHI
PANASONIC
SAMSUNG
SANYO/SEARS
TOSHIBA
KONKA
TCL
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
The following buttons can be used for operating the TV:
To use the CURSOR (CH–, CH+, VOL–, VOL+), TV/VIDEO - CANCEL and numeric buttons for TV control, set the
TV - DVD switch to “TV”.
TV
TV
DVD
Turns the TV on or off.
TV/VIDEO
CANCEL
Switches the TV input mode between TV and VIDEO.
Selects the TV channels directry.
TV1
TV-/--
*For some TVs, pressing “+10” functions as the “100+,” while“10” functions as
the ENTER button if your TV requires pressing the Enter button after selecting a
channel number.
1
to 10
TV0
0
MUTING
Mutes the TV sound.
+
10
+
CH
5
Changes the TV channels.
Adjusts the TV volume.
∞
-
CH
VOL
-
VOL
+
NOTES
• The remote control unit is initially set operating a JVC TV.
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press DVD STANDBY/ON
on the remote control unit or press
on the front panel.
DISC
DISC
DISC
3
2
1
3
2
1
0
0
0
DISC3
STANDBY
TV
DVD
PLAY
&
EXCHANGE
DVD VIDEO CD CD
10-bit/27MHz VIDEO D/A CONVERTER
DISC2
DISC1
/
/
STANDBY/ON
STANDBY/ON
DISC
SELECT
TV
DVD
XV-M50 DVD/CD PLAYER
DVD STANDBY/ON
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
DISC TITLE CHAP
RESUME THEATER
4
SKIP
¢
STOP
PLAY
PAUSE
DVD
EACH
DOLBY
7
3
8
D
I
G
I
T
A
L
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
• You can turn on the unit by pressing the 3button or any
one of the DISC (1 through 3) buttons on the front panel. In
this operation, the unit starts playback if the disc is set in
the disc tray.
• If no disc is set, “NO DISC” appears on the display window.
• You can turn on the unit by pressing the 0(OPEN/CLOSE)
button on the front panel.
NOTE
Even if you press the DVD STANDBY/ON
•
or
button to turn off the unit, the unit is not disconnected from the AC power
source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very
small amount of power.
Inserting and removing discs
1Press 0(OPEN/CLOSE) located on the right of the disc tray you want to open.
The corresponding disc tray opens.
2Place the disc in the tray.
With the label side up
3
3
C
IS
D
0
0
E
S
U
A
P
8
7
VD3
D
D
To insert an 8-cm disc, place
it in the inner recess.
D
V
E
E
D
R
V
G
C
N
/
T
A
H
D
E
I
C
C
NV
X
E
E
EO
&
z
D
C
R
S
Y
I
LA
V
P
/
D
D
O
O
V
D
/A
E
ID
V
H
M
7
2
it/
Y
B
-b
0
D
N
1
A
T
S
N
O
Y
B
D
N
A
T
S
Y
B
A
L
T
O
L
D
1
I
G
DVD
I
D
3Press 0(OPEN/CLOSE) located on the right of the disc tray.
• If you press 0(OPEN/CLOSE) for the disc being played, the unit stops playback and opens the tray.
• You can insert or remove the disc by pressing 0(OPEN/CLOSE) for a disc tray which is not in use for playback while a disc in the
other tray is being played, without interrupting playback.
NOTES
•
The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable
disc types, see page 12.
•
When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Basic playback
Now you can play a disc. First, let’s enjoy simple playback according to following procedure.
To start playback
Method 1
Press 3 on the front panel or remote control unit.
The unit starts playback from the selected disc indicated in the display window
DIGEST
ZOOM
Method 2
Basic
control
buttons
Press any of the DISC (1 through 3) buttons on the front panel.
The unit starts playback of the disc corresponding to the DISC button you
pressed.
SELECT
3
Method 3
Press DISC SELECT and any of numeric (1 through 3) buttons on the remote control unit.
The unit starts playback of the disc corresponding to the numeric button you pressed.
In any cases above, the unit basically plays back all discs in the trays once continuously in the following sequence
and then stops.
DISC1 DISC2 DISC3
• The unit changes the playback disc when the current disc finishes and stops playback.
Therefore, if the current disc is a DVD VIDEO disc or a Video CD disc with PBC function, it may not finish playback and
the unit may not change the disc and playback the next disc.
NOTES
•
•
•
When the resume point is memorized, pressing 3starts playback from that point instead of the beginning. See page 22 and 42.
During playback, the display window shows the disc number or the title/chapter or track number being played.
With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting play-
back. In such a case, select an item to be played back from the menu.
For operation using a menu, see page 24.
•
With some DVD discs, the unit starts playback automatically after inserting the disc.
.
To stop playback completely
Press
7.
The unit stops playback.
To stop playback temporarily
Press 8.
The unit pauses playback. To resume playback, press 3.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
.
To advance or reverse playback rapidly while monitoring
7During playback
From the Remote control unit
Press 1or ¡.
Each press of 1or ¡increases the playback speed. You can select the speed among 2x, 5x, 10x, 20x and 60x the
normal speed.
Pressing 3returns the unit to normal playback.
From the Front panel
Hold down 4or ¢.
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly. The speed will
change from 5x to 20x the normal speed if you keep holding down the button for a certain period of time. Releasing
the button returns the unit to normal playback.
To locate the beginning of the scene or song
7During playback
Press 4or ¢.
Press 4to locate the beginning of the current chapter, title, or track, and press ¢to locate the beginning of the
next chapter, title, or track.
NOTE
•
When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will gen-
erally locate the beginning of the title or chapter or track.
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
later 3.
To memorize the interrupted position
1Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.
(See page 42 for details about how to set.)
2At the position you want to interrupt playback, press
control or on the front panel.
7, or press DVD STANDBY/ON
on the remote
The unit memorizes the interrupted position.
• If you interrupt playback by pressing
7
in step 2 above and then turn off the power, the memory is not cleared.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To resume playback
7While the disc you interrupt playback last time is still in the disc tray.
Press 3.
The unit starts playback from the position where you interrupted playback last time.
•
To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press any one of the DISC (1 through 3) buttons on the front panel.
*Press
7
while stopped.
*Turn on the unit by pressing DVD STANDBY/ON
(on the remote control) or
(on the front panel).
NOTES
• The resume function does not work with Audio CD discs.
• The resume function does not work if “RESUME” on the “SYSTEM” page of the preference display is set to “OFF”.
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
• The resume function does not work in the program or random mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2Use CURSOR 5/∞/2/3to select a desired
item, then press ENTER.
When you use the functions described below while
stopped, make sure that the desired disc number is
selected (the selected disc number is shown in the display
window). If it is not selected, press the appropriate DISC
(1 - 3) button to start playback and then press 7.
When controlling the unit using the
The unit starts playback of the selected item.
• With some discs, you can also select items by entering the
corresponding number using the numeric buttons, which
may cause the unit to automatically start playback.
CURSOR, TV/VIDEO - CANCEL or
numeric buttons, make sure that the
TV - DVD switch is set to “DVD”.
When it is set to “TV”, these buttons are
used to control a TV.
TV
DVD
NOTES
• When
appears on the TV screen by pressing TITLE in
step 1:
Playing from a specific
position on a disc
The disc does not have a menu listing the titles.
• When appears on the TV screen by pressing MENU
in step 1:
The disc does not have a menu.
You can play a disc from the selected track, title or
chapter, or from the specified time.
• The menu button does not work while stopped.
To locate a desired scene from the menu
of the Video CD with PBC
To locate a desired scene from the DVD
menu
Some Video CD discs supports the PBC function. PBC is
an abbreviation of “PlayBack Control.” A Video CD disc
recorded with PBC has its own menus, such as a list of
the songs of the disc. You can locate a specific scene by
using the menu.
DVD VIDEO discs generally have their own menus which
show the disc contents. These menus contain various
items such as titles of a movie, names of songs, or artist
information, and display them on the TV screen. You can
locate a desired scene by using the menu.
TV
DVD
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV1
TV2
TV3
TV4
TV5
TV6
1
2
3
4
TV7
7
5
TV8
8
TV0
0
6
TV9
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
2
9
TV-/--
10
MUTING
9
+
10
THEATER
TV-/--
10
MUTING
+
10
ANGLE SUBTITLE AUDIO POSITION
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
DIGEST
ZOOM
SELECT
SELECT
3
3
1
1
+
CH
5
ENTER
∞
+
CH
VOL
-
VOL
+
5
ENTER
∞
VOL
-
VOL
+
2
-
CH
-
CH
RM-SXVM50J REMOTE CONTROL
RM-SXVM50J REMOTE CONTROL
7When a Video CD disc with PBC is stopped
7Whenever a DVD VIDEO disc is loaded
1Press 3(or the appropriate DISC (1 - 3)
1Press TITLE or MENU.
button on the front panel).
The menu appears on the TV screen.
A disc menu
Example:
appears on the TV
screen (The PBC
function is
activated).
About menu
Normally, a DVD VIDEO disc
which contains more than
one title may have a “title”
menu which lists the titles. In
this case, the menu appears
on the TV screen by pressing
the TITLE button. Some DVD
VIDEO discs may also have a
different menu which
Example:
“Pbc” is indicated in the display window on the
front panel.
appears by pressing the
MENU button.
See the instructions of each DVD VIDEO disc for its particular
menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
The unit starts playback from the beginning of the
selection.
• See page 11 for details about how to use the
numeric buttons.
2Use the numeric buttons to select the desired
number of the item.
• See page 11 for details about how to use the
numeric buttons.
NOTES
The unit starts playback of the selected item.
You can return to the menu by pressing the
RETURN button.
When “NEXT” or “PREVIOUS” appears on the TV
screen, the unit generally works as follows:
• Pressing ¢advances to the next page.
• Pressing 4returns to the previous page.
* The method of the operation is different
depending on the disc.
• During DVD VIDEO playback, if a menu is shown on the
TV screen, the numeric buttons may be used for
selecting an item in the menu.
• When
appears on the TV screen:
The title or track you have selected is not contained in
the disc.
• This function does not work during Video CD playback
with PBC function.
• To activate the PBC function when a PBC-compatible Video
CD disc is being played back without the PBC function,
press 7then press 3.
To locate a desired selection using
4or ¢
• You can also activate the PBC function using the play mode
menu display as follows.
1 Press PLAY MODE.
TV
DVD
STANDBY/ON
2 Use CURSOR 2/3to move
to [PBC CALL], then
DISC
SELECT
TV
DVD
press ENTER.
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
• If you want to playback a PBC-compatible Video CD disc
without activating the PBC function, start playback by using
the numeric buttons instead of the 3button. See the next
paragraph.
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1
SELECT
3
To locate a desired selection using the
numeric buttons
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
You can play a desired title or chapter (DVD VIDEO) or
track (Audio CD/Video CD) by specifying the number.
RM-SXVM50J REMOTE CONTROL
.
TV
DVD
STANDBY/ON
DISC
7For DVD VIDEO: During playback
SELECT
TV
DVD
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
For Audio CD:
For Video CD:
During playback
During playback without PBC function
MODE
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
1
9
TV-/--
10
MUTING
1Press 4or ¢.
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
With an Audio CD or Video CD, pressing the button
skips a track. With a DVD VIDEO disc, pressing the
button skips a chapter or title depending on the disc
configuration.
DIGEST
ZOOM
SELECT
3
The selection number appears in the display
window on the front panel.
+
CH
5
ENTER
∞
VOL
-
VOL
+
• To locate a subsequent selection, press ¢once
or repeatedly until the desired selection number
appears in the display.
-
CH
RM-SXVM50J REMOTE CONTROL
• To locate to beginning of the current selection,
press 4once.
• To locate a former selection, press 4repeatedly
until the desired selection number appears in the
display.
7For DVD VIDEO/Audio CD:
During playback or while stopped
During playback without PBC function
or while stopped
For Video CD:
1Use the numeric buttons to specify the number.
NOTES
• This function may not work with some DVD VIDEO
discs.
*
*
*
During DVD VIDEO playback (except when a
menu is shown), a chapter is specified.
While a DVD VIDEO is stopped, a title is
specified.
• This function does not work during Video CD playback
with PBC function.
For an Audio CD or Video CD, a track is
specified.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
NOTES
• You can also locate a desired chapter directly by
To locate a desired scene by specifying
the chapter number [CHAP.SEARCH]
specifying the chapter number using the numeric
buttons during playback (except when a menu is
shown). See page 25.
If the current title of a DVD VIDEO disc being played is
divided into chapters, you can skip to a desired chapter
by specifying the chapter number using the on-screen
display.
• When the chapter number is incorrect in step 3:
Overwrite the incorrect number with the correct
number.
• When
is displayed in the TV screen in step 4:
The chapter you have selected is not contained in the
disc, or chapter search does not work on the disc.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
• To turn off the play mode menu:
1
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
Press PLAY MODE.
4
TV7
7
5
TV8
8
TV0
0
6
TV9
3
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
To locate a desired position in the
current title or track [TIME SEARCH]
SELECT
3
2-2, 4
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
2-1
You can play a disc from the desired position by
specifying the elapsed time from the beginning of the
current title or track using the TIME SEARCH function.
Note that some DVD VIDEO discs do not contain time
information, and the TIME SEARCH function cannot be
used.
RM-SXVM50J REMOTE CONTROL
7 During DVD VIDEO playback
1Press PLAY MODE.
The DVD play mode menu appears on the TV
screen.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
1
TV1
TV2
TV3
1
2
3
2Use CURSOR 2/3 to move to [CHAP.
SEARCH], then press ENTER.
“GO TO CHAPTER = ”
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
3
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DVD CONTROL
appears under the
DIGEST
ZOOM
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
menu.
SELECT
3
GO TO CHAPTER =
2-2, 4
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
2-1
3Use the numeric buttons (0 to 9) to enter the
RM-SXVM50J REMOTE CONTROL
desired chapter number.
Example:
To select chapter number 8:
Press “8” → ENTER.
To select chapter number 37:
Press “3” → “7” → ENTER.
7 For DVD VIDEO: During playback
For Audio CD:
For Video CD:
During playback
During playback without PBC function
1Press PLAY MODE.
4Press ENTER.
The play mode menu appears on the TV screen.
The unit starts playback from the selected chapter.
2Use CURSOR 2/3 to move to [TIME
SEARCH], then press ENTER.
“GO TO” appears under the menu.
• The “10” and “+10” buttons are not used in this function.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3Use the numeric buttons (0 to 9) to enter the
NOTES
• When
time.
appears on the TV screen in step 2:
You can specify the elapsed time of the current title
or track to set the location which you want to
playback from.
The time you have selected is not contained on the disc,
or the time search function does not work on the disc.
Also note that the time search function does not work
during Video CD playback with the PBC function.
4Press ENTER.
• To turn off the play mode menu:
The unit starts playback from the specified time.
Press PLAY MODE.
• The TIME SEARCH function cannot be used during
program playback.
(for DVD VIDEO)
(for Audio CD)
DVD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT A-B REPEAT TIME SEARCH
GO TO 2 : 3 4 : 0 0
GO TO 0 2 : 3 4
To locate a desired scene from the
display [DIGEST]
Selected time
Selected time
The unit can display the opening scene of each title or
chapter on a DVD VIDEO or each track of a Video CD. You
can select a desired scene from those displayed on the
TV screen.
(for Video CD)
VCD CONTROL
• “10” and “+10” buttons
are not used in this
function.
REPEAT A-B REPEAT TIME SEARCH PBC CALL
GO TO 0 2 : 3 4
• You can specify the time in
hour/minute/second
format for DVD VIDEO
discs, and in minute/
second format for Audio
and Video CD discs.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
MODE
TV1
TV2
TV3
1
2
3
Selected time
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
•
Example (for DVD VIDEO)
DIGEST
ZOOM
1
2
To playback from 2(H):34(M):00(S)
SELECT
3
*2ꢀ72ꢀꢀBꢀꢆꢀBꢀBꢀꢆꢀBꢀB
+
3
CH
5
ENTER
∞
VOL
-
VOL
+
Press “2”.
-
CH
*2ꢀ72ꢀꢀꢅꢀꢆꢀBꢀBꢀꢆꢀBꢀB
RM-SXVM50J REMOTE CONTROL
Press “3”.
*2ꢀ72ꢀꢀꢅꢀꢆꢀꢇꢀBꢀꢆꢀBꢀB
7For DVD VIDEO:
For Video CD:
While stopped or during playback
While stopped or during playback
without PBC function
Press “4”.
*2ꢀ72ꢀꢀꢅꢀꢆꢀꢇꢀꢈꢀꢆꢀBꢀB
1Press DIGEST.
Press ENTER
Up to nine opening scenes are displayed.
You do not have to press “0” to enter the trailing zeros
(for the last two digits in the example above). Of course,
it is possible to enter them.
• While a DVD VIDEO disc is stopped:
The opening scene of each title appears on the TV
screen.
• During DVD VIDEO disc playback:
The opening scene of each chapter in the current
title appears on the TV screen.
• When a Video CD disc is loaded:
The opening scene of each track appears on the
TV screen.
•
When you make a mistake
Move the cursor to the incorrect value, then press the
correct button to re-select the value.
*2ꢀ72ꢀꢀꢅꢀꢆꢀꢇꢀꢂꢀꢆꢀBꢀB
Press CURSOR 2.
*2ꢀ72ꢀꢀꢅꢀꢆꢀꢇꢀBꢀꢆꢀBꢀB
Press “4”.
*2ꢀ72ꢀꢀꢅꢀꢆꢀꢇꢀꢈꢀꢆꢀBꢀB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2Use CURSOR 5/∞/2/3to select the desired
scene.
Special picture playback
The selected scene is indicated by
.
The unit provides special picture playback functions
including Frame-by-frame, Strobe, Slow-motion and Zoom.
If there are more than 9 scenes, the digest screen
will have more than one page. In this case, pressing
¢advances to the next page, while pressing 4
returns to the previous page.
To advance a still picture
frame-by-frame
DIGEST
ZOOM
SELECT
3
1
+
CH
5
ENTER
∞
VOL
-
VOL
+
Selected scene
-
CH
RM-SXVM50J REMOTE CONTROL
• When the lower right scene is selected, pressing CURSOR
3advances to the next page if available. Similarly, when
the upper left scene is selected, pressing CURSOR 2
returns to the previous page (if available).
7 While paused (still)
1Press 8.
• When there are more than one digest page, after pressing
DIGEST, pressing ¢before all 9 scenes of the first page
appear on the TV screen will advance to the next page.
Similarly, pressing 4before all the scenes of the second
or latter page appear on the TV screen will return to the
previous page.
Each time you press 8, the still picture advances to
the next frame.
Pressing 3returns to normal playback.
To display continuous still pictures
[STROBE]
3Press ENTER.
The unit starts playback from the selected scene.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
NOTE
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
• With some discs, depending on the contents, it may
take some time until all the scenes appear on the
screen.
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1, 2
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
RM-SXVM50J REMOTE CONTROL
7 During playback
1At the point you want to view as continuous
photographs, press 8.
The unit pauses playback.
2Press and hold 8for more than 1 second.
Nine continuous still
pictures appear on the
TV screen.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To zoom a scene [ZOOM]
• Pressing 8when the nine still pictures is shown will
advance to the next nine still pictures.
• Pressing 3when the nine still pictures is shown will
advance pictures in normal playback speed.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
•
To cancel strobe play
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
Press and hold 8for more than 1 second.
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
NOTE
DIGEST
ZOOM
1
2
• If you press and hold 8for more than 1 second during
playback, nine still pictures also appear but they
advance in normal playback speed.
SELECT
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
To playback in slow-motion
[SLOW]
RM-SXVM50J REMOTE CONTROL
7During playback or while paused
TV
DVD
1Press ZOOM.
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
“ZOOM” appears on the TV screen.
The unit zooms in to the center part of the scene to
produce a double-sized image.
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
RM-SXVM50J REMOTE CONTROL
ZOOM
7During playback
1Press 8, then use 1/ ¡.
To play forward slow-motion, press ¡, and to play
reverse slow-motion (for DVD VIDEO discs only),
press 1. First, the unit plays the slowest speed,
and each time you press the button, the playback
speed increases.
2Use CURSOR 5/∞/2/3to move the
zoomed-in position.
•
•
To return to normal playback
Press 3.
ZOOM
To pause slow-motion playback
Press 8.
NOTES
• The sound is muted during slow-motion playback.
• Reverse slow-motion playback is not possible for a
Video CD.
•
To return to normal playback
Press ZOOM.
NOTE
• While zoomed, the picture may look coarse.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
5Repeat steps 3 and 4.
Up to 18 titles or tracks can be programmed. You
may select the same title or track more than once.
Changing the playback
order
1
3-3
7
2
2-5
8
3
1-4
9
4
5
6
2-8
10
11
17
12
18
13
14
15
16
You can play titles or tracks on discs inserted in the
desired order or in random order.
The programmed title/track number is
shown under each program number.
To playback in the desired order
[PROGRAM]
•
•
If you specify a wrong selection
Press TV/VIDEO - CANCEL. The last selection
programmed is erased.
You can play titles or tracks on discs inserted in the
desired order by using the Program function.
To clear the program
Press 7.
TV
DVD
STANDBY/ON
DISC
3-1, 5
SELECT
TV
DVD
6Press 3to start program play.
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
1
TV1
TV2
TV3
When all of the programmed titles/tracks have
finished playback, the unit stops but the program
remains.
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
3-2, 4, 5
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
NOTES
SELECT
6
3
• Some DVD VIDEO discs may not be played back
correctly in program mode.
+
CH
2-2
5
ENTER
∞
• During program playback, pressing ¢skip to the next
selection of the program. Pressing 4returns to the
beginning of the current selection, however, you cannot
skip back to the previous selection.
VOL
-
VOL
+
-
CH
2-1
RM-SXVM50J REMOTE CONTROL
• By pressing PLAY MODE during program playback, the
program table is displayed on the TV screen and the
current program number is indicated in yellow.
7While stopped
• In the program mode, the DISC (1 through 3) buttons
are invalid.
1Press PLAY MODE.
The play mode menu appears on the TV screen.
•
To quit program playback
Press 7while stopped.
The “PROGRAM” indicator in the display window
turns off.
2Use CURSOR 2/3to move to
[PROGRAM] and press ENTER.
Note that the program remains.
To clear the program, press 7while the program table
is shown on the TV screen.
REPEAT
PROGRAM
RANDOM
1
7
2
8
3
9
4
5
6
10
16
11
17
12
18
13
14
15
• While stopped and the play mode menu is displayed on the
TV screen, by moving
to [PROGRAM] and pressing
ENTER, the program mode quits. Note that the program
remains.
The program table appears under the menu bar (as
shown above).
The “PROGRAM” indicator appears in the display
window on the front panel.
3Specify the disc by pressing DISC SELECT
followed by the appropriate numeric (1 - 3)
button.
4Specify the titles or tracks in the desired order
using the numeric buttons.
See page 11 for details about how to use the
numeric buttons.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To playback in random order
[RANDOM]
You can play titles or tracks on discs inserted in random
order by using the Random function.
Repeat playback
You can repeat playback of the current selection or all disc
contents (except DVD VIDEO). You can also repeat playback
of a desired part.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
To repeat the current selection or all
discs contents [REPEAT]
MODE
TV1
TV2
TV3
1
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
TV
DVD
STANDBY/ON
DISC
SELECT
SELECT
TV
DVD
3
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
+
1
2
3
CH
TV4
TV5
TV6
3
5
ENTER
∞
VOL
-
VOL
+
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
-
CH
THEATER
ANGLE SUBTITLE AUDIO POSITION
2
DIGEST
ZOOM
RM-SXVM50J REMOTE CONTROL
SELECT
3
7While stopped
+
CH
2-2
5
ENTER
∞
VOL
-
VOL
+
1Press PLAY MODE.
-
CH
The play mode menu appears on the TV screen.
2-1
RM-SXVM50J REMOTE CONTROL
2Use CURSOR 2/3to move to [RANDOM].
REPEAT
PROGRAM
RANDOM
7For DVD VIDEO:
During playback
For Audio CD/Video CD: In any condition except
Video CD playback with PBC
1Press PLAY MODE.
The play mode menu appears on the TV screen.
3Press ENTER.
2Use CURSOR 2/3to move to [REPEAT],
The “RANDOM” indicator appears in the display
window on the front panel.
then press ENTER.
The unit starts random playback of the selected
disc. When all titles/tracks of the disc have been
played once, the unit starts random playback of the
next disc (if inserted). After playing all titles/tracks
of the second disc, the unit starts random playback
of the third disc (if inserted). After playing all titles/
tracks of all the discs, random playback ends.
Each time you press ENTER, the repeat mode
changes as follows depending on the disc type and
unit’s status:
•
During DVD VIDEO playback
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT TITLE
• The same title or track will not be played back more than
once during random play.
•
To stop/quit random playback in the middle
Selected repeat mode
Press 7to stop playback. The unit is still in random
playback mode, so pressing 3starts random playback
again.
To quit random playback, press 7again while
stopped. The “RANDOM” indicator in the display
window turns off.
REPEAT TITLE
(current title repeat)
REPEAT CHAPTER
(current chapter repeat)
NOTE
• Some DVD VIDEO discs may not be played back
correctly in the random mode.
No indication (off)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
During Audio CD/Video CD playback
To repeat a desired part
[A-B REPEAT]
(for Video CD)
(for Audio CD)
VCD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
REPEAT A-B REPEAT TIME SEARCH
REPEAT ALL
REPEAT ALL
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
1
TV1
TV2
TV3
1
2
3
Selected repeat mode
Selected repeat mode
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
REPEAT ALL (all track repeat)
DIGEST
ZOOM
REPEAT 1 (current track repeat)
SELECT
3
No indication
(off)
2-2, 3
2-1
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
•
•
While Audio CD/Video CD stopped
RM-SXVM50J REMOTE CONTROL
REPEAT ALL
(all track repeat)
7During playback
No indication (off)
1Press PLAY MODE.
To stop repeat playback
The play mode menu appears on the TV screen.
Press 7 .
2Use CURSOR 2/3to move to [A-B
REPEAT], then press ENTER at the beginning
of the part you want to repeat (point A).
Make sure that the REPEAT mode is off. If any
• If you press 7in REPEAT ALL mode, the unit stops playback
but remains in the mode.
• If you press 7in REPEAT1, TITLE REPEAT or CHAPTER
REPEAT mode, the unit stops playback and quits the mode.
REPEAT mode is selected, you cannot move
[A-B REPEAT].
to
•
To quit repeat playback
3Press ENTER at the end of the part you want
With
pointed at [REPEAT], press ENTER repeatedly
to repeat (point B).
until the mode is set to off.
The unit locates “A” and starts repeat playback
between “A” and “B.”
NOTES
• Some DVD VIDEO discs do not allow the title repeat or/
and chapter repeat.
(for Audio CD)
(for DVD VIDEO)
CD CONTROL
DVD CONTROL
• Some DVD VIDEO discs automatically stops playback in
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
the middle of the disc.
• When REPEAT ALL is selected while an Audio CD or
Video CD is stopped, the unit enters all disc repeat
mode and starts playback of the current disc. However,
if the unit reads a disc on the second or third tray and
recognizes it as a DVD VIDEO disc, the repeat mode is
canceled. In other words, you cannot enjoy all disc
repeat playback if one or more DVD VIDEO discs are set
in the unit.
A 0:00:16
B 0:01:31
A 0:00:16
B 0:01:16
Point A Point B
Point A Point B
(for Video CD)
VCD CONTROL
• During the REPEAT ALL playback, if the next disc is a
Video CD disc with PBC, the unit plays the disc without
activating the PBC function.
REPEAT A-B REPEAT TIME SEARCH PBC CALL
A 0:00:16
B 0:01:31
• Repeat playback function cannot be used during Video
CD playback with PBC function.
• To turn off the play mode menu display
Press PLAY MODE.
Point A Point B
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
To quit A-B repeat playback
Press 7. The unit stops playback and quits A-B repeat
mode.
Selecting a scene angle of
DVD VIDEO
• During playback, pressing ENTER when
is pointed at [A-
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains “multi-angle” parts, where multiple cameras
were used to shoot the same scene from different angles.
B REPEAT] quits A-B repeat mode and continues playback.
• You can also quit A-B repeat mode by pressing 4or ¢.
NOTES
• At the beginning of a “multi-angle” part,
TV screen.
appears on the
• To turn off the play mode menu
Press PLAY MODE.
• If
appears when pressing ENTER in step 2 during
DVD playback
To select a scene angle from the normal
screen [ANGLE]
You cannot repeat the selected portion because of the
disc contents.
• The A-B REPEAT function cannot be used during
program playback.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
1, 2
DIGEST
ZOOM
SELECT
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
2
RM-SXVM50J REMOTE CONTROL
7During DVD VIDEO playback
1Press ANGLE.
The Angle selection
display appears on the
TV screen.
1 / 3
2Use ANGLE or CURSOR 2/3to select the
desired angle.
Each time you press ANGLE or CURSOR 2/3, the
angle changes.
Example:
1 / 3
2 / 3
3 / 3
NOTES
• The Angle selection display will automatically
disappear if you do not change the angle for 10 seconds.
• To turn off the Angle selection display manually, press
ENTER.
• When
appears on the TV screen
The current scene is not recorded from multiple angles.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To select a scene angle from the angle
list display [ANGLE]
Changing the language and
sound
For DVD VIDEO discs, you can select the subtitle language,
as well as the audio language/sound included on a disc.
For Video CD discs, you can select the audio channel(s).
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
MODE
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
To select the subtitle language
[SUBTITLE]
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
1
3
DIGEST
ZOOM
SELECT
3
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
+
CH
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
5
ENTER
∞
MODE
VOL
-
VOL
+
TV1
TV2
TV3
2
1
2
3
TV4
TV5
TV6
-
CH
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
RM-SXVM50J REMOTE CONTROL
DIGEST
ZOOM
1, 2
SELECT
7During DVD VIDEO playback
3
1Press and hold ANGLE for more than 1
+
CH
5
ENTER
∞
VOL
-
VOL
+
second.
-
CH
Up to nine camera
angles recorded on
a disc appear on the
TV screen.
3
RM-SXVM50J REMOTE CONTROL
7During DVD VIDEO playback
1Press SUBTITLE.
The Subtitle selection
display appears on
the TV screen.
The selected camera angle
ON
1 / 3
ENGLISH
2Use CURSOR 5/∞/2/3to select the desired
angle.
3Press ENTER.
The unit starts playback by the selected angle on
the full-sized screen.
2To turn the subtitle on and off, press
SUBTITLE.
NOTES
• When
3To select the desired subtitle language, use
CURSOR 2/3.
appears on the TV screen in step 1:
The current scene is not recorded from multiple angles.
Each time you press
Example:
• During the operation above, audio is muted.
CURSOR 2/3, the
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
-/3 (off)
subtitle language
changes.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
For Video CD
NOTES
• For DVD VIDEO, the selected language may be abbreviated
Each time you press AUDIO or
CURSOR 2/3, the playback
audio changes as follows.
Example:
on the TV screen. See “Appendix A: Table of languages and
their abbreviations” at the end of this manual.
STEREO
• The Subtitle selection display will automatically
disappear if you do not change the subtitle for 10
seconds.
L
R
• To turn off the Subtitle selection display manually, press
ENTER.
NOTES
• When
appears on the TV screen:
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Appendix A: Table of languages and
their abbreviations” at the end of this manual.
You cannot select the subtitle.
• The Audio selection display will automatically
disappear if you do not change the audio for 10
seconds.
To change the audio language or sound
[AUDIO]
• To turn off the Audio selection display manually, press
ENTER.
• When
disc):
appears on the TV screen (for a DVD VIDEO
By AUDIO selection, you can choose the audio language of
movies or choose to enjoy karaoke with or without the vocal.
You cannot select the audio.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1, 2
SELECT
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
2
RM-SXVM50J REMOTE CONTROL
7During playback
1Press AUDIO.
The Audio selection display appears on the TV
screen.
(for DVD VIDEO)
(for Video CD)
STEREO
1 / 3
ENGLISH
2Use AUDIO or CURSOR 2/3to select the
desired audio.
•
For DVD VIDEO
Each time you press AUDIO
Example:
or CURSOR 2/3, the audio
language or sound changes.
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Selecting the picture
character
Enjoying virtual surround
sound
You can select the picture character from among four
options according to the source program, lighting
condition of the room and/or personal preference.
Using the 3D Phonic function, you can get a simulated
surround effect from your stereo system.
To simulate surround sound
[3D PHONIC]
To select the picture character
[THEATER POSITION]
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1, 2
1
2
3
TV1
TV2
TV3
TV4
TV5
TV6
1
2
3
4
TV7
7
5
TV8
8
TV0
0
6
TV9
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
MUTING
9
+
10
TV-/--
10
TV0
0
MUTING
THEATER
+
ANGLE SUBTITLE AUDIO POSITION
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1, 2
DIGEST
ZOOM
SELECT
3
SELECT
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
-
CH
RM-SXVM50J REMOTE CONTROL
RM-SXVM50J REMOTE CONTROL
7During playback
7During playback
1Press 3D PHONIC.
1Press THEATER POSITION.
The 3D PHONIC display appears on the TV screen.
The theater position display appears on the TV screen.
2Select the desired mode by using 3D PHONIC.
2Select the desired theater position by using
Each time you press the 3D PHONIC button, the 3D
PHONIC mode changes as follows:
THEATER POSITION.
Each time you press the THEATER POSITION
button, the picture character changes as follows:
3D PHONIC DRAMA
THEATER 1
Selected effect mode
Selected picture character
3D PHONIC ACTION*
3D PHONIC DRAMA
3D PHONIC THEATER
3D PHONIC OFF
THEATER 1
“THEATER OFF” is the
THEATER 2
THEATER 3
normal position. Selectin
a higher number tones
down the picture
character.
THEATER OFF
•
•
ACTION
Suitable for action movies and sports programs in
which sounds dynamically move.
NOTES
• The theater position display will automatically disappear
if you do not change the theater position for 5 seconds.
DRAMA
• To turn off the theater position display manually, press
ENTER.
Natural and warm sound. You can enjoy movies in a
relaxed mood.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
THEATER
You can enjoy sound effects like in a major theater in
Hollywood.
Checking the status
You can view the disc/time information, as well as the
DVD functions status on the TV screen.
%
When you play a DVD VIDEO disc recorded in Dolby
Digital which contains more than 3 channels, ACTION
does not appear.
To check the disc/time information
NOTES
• The 3D Phonic display will automatically disappear if
you do not change the 3D PHONIC for 5 seconds.
• To turn off the 3D PHONIC display manually, press
ENTER.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
• With a Video CD disc, if the Audio setting is set to L or
R, tou cannot activate the 3D PHONIC function (i.e the
3D PHONIC mode is fixed to OFF).
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
9
TV-/--
10
MUTING
+
Conversly, when the 3D PHONIC function is active,
changing the AUDIO setting to L or R from STEREO
cancels the 3D PHONIC function.
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
• The 3D PHONIC function works correctly when playing
back discs recorded in the Dolby Surround or Dolby
Digital 5.1-CH format.
It also works when playing back discs other than those
above, but does not provide the correct effect.
3
+
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
1
• The 3D PHONIC function does not affect the DTS or
Dolby Digital bitstream signal from the DIGITAL OUT
jack.
RM-SXVM50J REMOTE CONTROL
• The sound effect will not be set or operate, even if 3D
PHONIC is pressed, for the sound of DVD VIDEO discs
recorded in Linear PCM.
7During playback
1Press DISPLAY once for a Audio CD or Video
CD disc, or twice for a DVD VIDEO disc.
The disc/time display appears on the TV screen.
• When you set the 3D PHONIC function to on, the DOWN
MIX and COMPRESSION settings in the AUDIO page of
the preference display are disabled.
(for DVD VIDEO)
Mbps
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
DISC
3
Transmission
rate
Elapsed time
Current chapter number
Current title number
Disc number
(for Audio CD or Video CD playing without PBC)
DISC
3
TRACK 1TIME 00:08
EACH
Time mode
Current track elapsed time
Current track number
Disc number
(for Video CD playing with PBC)
TRACK 1TIME 00:08 PBC
DISC
3
PBC on status
Current track elapsed time
Current track number
Disc number
•
To turn off the disc/time display
Press DISPLAY.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To check the DVD function status
To dim, the brightness of
the display window
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
You can select the brightness of the display window.
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
Dimming the brightness of the display
window
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
+
CH
5
ENTER
∞
PLAY
3D TV/VIDEO
PHONIC CANCEL RETURN
VOL
-
VOL
+
MODE
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
-
CH
1
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
10
TV0
0
MUTING
+
10
RM-SXVM50J REMOTE CONTROL
THEATER
ANGLE SUBTITLE AUDIO POSITION
1
DIGEST
ZOOM
SELECT
3
7During DVD VIDEO playback
+
CH
1Press DISPLAY.
5
ENTER
∞
VOL
-
VOL
+
1
The DVD function status display appears on the TV
screen.
-
CH
RM-SXVM50J REMOTE CONTROL
1 / 2
1 / 2
1 / 2
ENGLISH ENGLISH
7When no disc is inserted or while stopped
1 Press CURSOR ∞while holding down
ANGLE.
The display window gets darker.
To restore the display window brighter, press
CURSOR 5while holding down ANGLE.
The current selections of the camera angle, audio
language and subtitle language are shown.
•
To turn off the DVD function status display
Press DISPLAY twice.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
3Press CURSOR 2/3to select the setting you
want.
Selecting preferences
• To turn off the preference display, press CHOICE or
move
to [EXIT] and press ENTER.
You can set various preferences for playback via four
dedicated displays.
• For details about each setting, see the following
paragraphs:
How to set preferences
Note that you cannot bring up a preference display
during playback or when an Audio CD is loaded in the
tray.
LANGUAGE page
MENU LANGUAGE
You can select the default “display” language to be
displayed if it is contained on the disc.
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
Each time you press CURSOR
AUDIO
DISPLAY
SYSTEM
LANGUAGE
9
TV-/--
10
TV0
0
MUTING
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
+
3, the language setting
changes in the following
order:
10
ENGLISH
ENGLISH
ENGLISH
THEATER
ANGLE SUBTITLE AUDIO POSITION
ON SCREEN LANGUAGE
DIGEST
ZOOM
EXIT
SELECT
PRESS
KEY
3
3
1
+
CH
5
ENTER
∞
VOL
-
VOL
+
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
-
CH
2
RM-SXVM50J REMOTE CONTROL
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
7When no disc is inserted in the tray, or when a DVD
VIDEO or Video CD is inserted and stopped
Pressing CURSOR 2changes the language setting in the
reverse order of the above.
1Press CHOICE.
One of the preference pages appears on the TV screen.
There are four preference pages: LANGUAGE,
AUDIO, DISPLAY and SYSTEM. To turn the page,
* If the selected language is not recorded, the disc’s
default display language will be displayed.
move
to the desired tab using CURSOR 2/3.
AUDIO LANGUAGE
LANGUAGE
AUDIO
You can select the default audio language to be played if
it is contained on the disc.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
COMPRESSION
ON SCREEN LANGUAGE
Each time you press
AUDIO
DISPLAY
SYSTEM
LANGUAGE
EXIT
EXIT
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
CURSOR 3, the language
setting changes in the
following order :
ENGLISH
ENGLISH
ENGLISH
PRESS
KEY
PRESS
KEY
ON SCREEN LANGUAGE
EXIT
DISPLAY
SYSTEM
PRESS
KEY
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
4:3 LB
MODE 2
ON
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
EXIT
EXIT
PRESS
KEY
PRESS
KEY
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
2Move
to select the item you want to set by
Pressing CURSOR 2changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default audio language will be played.
using CURSOR 5/∞ꢃ
AUDIO
MENU LANGUAGE
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
EXIT
PRESS
KEY
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
AUDIO page
DIGITAL AUDIO OUTPUT
Each time you press
To connect the unit’s digital
output to an external device
equipped with a digital input,
this item must be set
correctly.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
CURSOR 3, the language
setting changes in the
following order:
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
COMPRESSION
ON SCREEN LANGUAGE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
•
PCM ONLY
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
•
STREAM/PCM
Pressing CURSOR 2changes the language setting in the
reverse order of the above.
When you connect to the digital input of an amplifier
to a built-in DTS, Dolby Digital, or MPEG multichannel
decoder.
* If the selected language is not recorded, the disc’s
default subtitle language will be displayed.
•
DOLBY DIGITAL/PCM
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
ON SCREEN LANGUAGE
You can select the on-screen display language to be
displayed.
The following chart shows the relationship between
types of playback discs and output signals.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
Each time you press
CURSOR 3, the language
setting changes as follows:
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
Output
ON SCREEN LANGUAGE
EXIT
DOLBY
DIGITAL/
PCM
Playback discs
PRESS
KEY
STREAM/
PCM
PCM ONLY
DVD with 48 kHz, 48 kHz,16 bit
16 bit linear PCM linear PCM
+
+
+
+
+
DVD with 48 kHz, 48 kHz,
20/24 bit linear
PCM
20/24 bit
linear PCM
DVD with 96 kHz, No output
linear PCM
+
+
ON SCREEN LANGUAGE
English
German
ENGLISH
DEUTSCH
FRANCAIS
DVD with DTS
DTS bitstream No ouput
DVD with Dolby
Digital
Dolby Digital
bitstream
48 kHz, 16 bit
linear PCM
+
BILDSCHIRMMENUE-SPRACHE
DVD with MPEG MPEG
48 kHz, 16 bit
linear PCM
+
multichannel
bitstream
French
Video CD
44.1 kHz,
16 bit
+
+
Pressing CURSOR 2changes the language setting in the
linear PCM
reverse order of the above.
Audio CD
48 kHz,16 bit
linear PCM
+
+
+
+
Audio CD with DTS DTS bitstream
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers. Never use the unit's analog output jacks,
which output incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the
amplifier connected to the analog outputs to minimum.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
DOWN MIX
To playback a DVD VIDEO
disc recorded with surround
multichannel audio
correctly, the DOWN MIX
setting must be properly
made according to your
audio system. Note that this
setting affects the output signal from the AUDIO (both
DIGITAL and ANALOG) output jacks when playing back a
DVD VIDEO disc recorded with surround multichannel
audio.
DISPLAY page
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
EXIT
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
PRESS
KEY
EXIT
PRESS
KEY
•
4:3 LB
(Letter Box Conversion)
When you connect a normal
TV to the unit.
•
Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
•
L0/R0
When you enjoy conventional 2-channel stereo audio
by connecting the unit’s AUDIO output to a stereo
amplifier/receiver or television set, or when you
duplicate audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
•
4:3 PS
(Pan Scan Conversion)
When you connect a normal
TV to the unit. When you play
a wide picture recorded on a
DVD VIDEO disc, a portion of
the picture is automatically
cut off from the left and right
sides of the image.
NOTES
• The Down mix function does not work when the 3D
PHONIC function is activated.
Depending on the disc, it may not be possible to
playback in this mode. In that case, the picture is
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream signal from DIGITAL OUT.
played back as in 4:3 LB
mode.
To enjoy the DOWN MIX effect from DIGITAL OUT when
playing back a disc recorded with the MPEG
multichannel or Dolby Digital format, set “DIGITAL
AUDIO OUTPUT” to “PCM ONLY” (see page 40).
•
16:9 WIDE (Wide Television screen)
When you connect a
wide-screen TV to the
unit.
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
COMPRESSION
You can compress the dynamic
range of the sound if needed.
Using this function, you can
listen to sound at low volumes
easily.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
SCREEN SAVER
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
COMPRESSION
EXIT
PRESS
KEY
•
•
ON
•
MODE 1
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
Audio is played back with the dynamic range
compressed.
The current picture gets
dark.
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
OFF
EXIT
•
MODE 2
Audio is played back as it was recorded.
PRESS
KEY
The “screen saver” picture
appears and its brightness
changes.
NOTES
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
•
OFF
The screen saver function is off.
• The Compression function does not work when the 3D
PHONIC function is activated.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
ON SCREEN GUIDE
SYSTEM page
The unit can display “on-
screen guide” icons or
characters on the picture,
which show what is
happening to the disc or the
unit.
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
AUTO STANDBY
AUDIO
DISPLAY
SYSTEM
LANGUAGE
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters standby
mode automatically.
OFF
OFF
AUTO STANDBY
RESUME
EXIT
DVD 1
AV COMPULINK MODE
PRESS
KEY
EXIT
PRESS
KEY
•
•
ON
The on-screen guide will be displayed.
•
•
•
60
Time is set to 60 minutes.
OFF
The on-screen guide will not be displayed.
Examples of “on-screen guide” icons or characters:
30
Time is set to 30 minutes.
,
,
OFF
The auto standby function is off.
RESUME
AUDIO
DISPLAY
SYSTEM
LANGUAGE
You can select the resume
function to be on or off. See
page 22.
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
PRESS
KEY
•
ON
Pressing 3while stopped
or on standby starts playback from the resume point if
it is memorized.
•
OFF
Pressing 3while stopped or on standby starts
playback from the beginning of the disc.
AV COMPULINK MODE
This item is provided for use
in the future. Leave it as the
default setting (“DVD1”).
AUDIO
DISPLAY
SYSTEM
LANGUAGE
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
PRESS
KEY
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
4While
points [Set Level], use CURSOR
2/3to select the parental lock level.
Limiting playback by
children
PARENTAL LOCK
GB
1
Country Coce
Set Level
- - - -
PASSWORD
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according to the
level set by the user. For example, if a movie which
includes violent scenes supports the parental lock
feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
EXIT
PRESS
KEY
ENTER
Each time you press CURSOR 2/3, the parental
level changes as follows:
1
.
To set Parental Lock for the first time
[PARENTAL LOCK]
.
.
8
–
TV
DVD
STANDBY/ON
DISC
SELECT
TV
DVD
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
• “1” is the strictest level. “–” means no restriction. Discs
rated higher than the selected level are restricted.
4
TV7
7
5
TV8
8
6
TV9
6
9
TV-/--
10
TV0
0
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
5Press ENTER.
SELECT
3
1
moves to [PASSWORD].
1, 3, 5, 7
2, 4
+
CH
5
ENTER
∞
VOL
-
VOL
+
6Enter your 4-digit password using the numeric
buttons (0 to 9).
-
CH
PARENTAL LOCK
RM-SXVM50J REMOTE CONTROL
GB
8
Country Code
Set Level
- - - -
PASSWORD
7While a DVD VIDEO disc is stopped or no disc is inserted
EXIT
NEW PASSWORD? ••• PRESS 0~9 KEY.
1Press ENTER while holding down 7on the
remote control unit.
The Parental Lock on-screen display appears on the
TV screen.
7Press ENTER.
The parental level and password are set.
moves to [EXIT].
points [Country Code].
Pressing ENTER again returns to the opening
display.
2While
points [Country Code], use CURSOR
2/3to select the country code.
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See “Appendix B: Country code list for parental
lock.”
• If you enter an undesired password in step 6 above, reenter
the password before pressing ENTER.
PARENTAL LOCK
GB
—
Country Code
Set Level
- - - -
PASSWORD
EXIT
PRESS
KEY
ENTER
3Press ENTER.
moves to [Set Level].
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
4To change the set level, use CURSOR 2/3to
To change the settings [PARENTAL
LOCK]
select the desired level while
Level], and then press ENTER.
moves to [PASSWORD].
points [Set
You can change the Parental lock settings later.
5Enter the password using the numeric buttons
TV
DVD
(0 to 9) and press ENTER.
STANDBY/ON
DISC
SELECT
TV
DVD
moves to [EXIT].
PLAY
MODE
3D TV/VIDEO
PHONIC CANCEL RETURN
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening display.
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
TV0
0
6
TV9
2-1, 5-1
9
TV-/--
10
MUTING
+
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1, 2-2, 3-2,
4-2, 5-2
1
+
CH
5
ENTER
∞
VOL
VOL
+
-
-
CH
NOTES
3-1, 4-1
• When you enter the wrong password more than 3 times
in step 2 above,
RM-SXVM50J REMOTE CONTROL
moves to [EXIT] automatically and
CURSOR 5/∞does not work.
• If you forget your password in step 2
Enter “8888.”
7While a DVD VIDEO disc is stopped or no disc is inserted
1Press ENTER while holding down 7on the
remote control unit.
The Parental Lock on-
PARENTAL LOCK
screen display appears
on the TV screen.
points [PASSWORD].
GB
8
Country Code
Set Level
- - - -
PASSWORD
EXIT
CURRENT PASSWORD? ••• PRESS 0~9 KEY
2Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct
password.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen, and you
cannot go to next step.
3To change the country code, use CURSOR
2/3to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
To temporarily release the Parental
lock [PARENTAL LOCK]
When you set the parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the parental lock to be temporarily released or
not.
TV
DVD
STANDBY/ON
DISC
SELECTTV
DVD
PLAY
3DTV/VIDEO
MODEPHONICCANCELRETURN
TV1
TV2
TV3
1
2
3
TV4
TV5
TV6
4
TV7
7
5
TV8
8
6
TV9
9
MUTING
2
TV-/--
10
TV0
0
+
10
THEATER
ANGLESUBTITLEAUDIOPOSITION
DIGEST
ZOOM
SELECT
3
+
1-2
1-1
CH
5
ENTER
∞
VOL
-
VOL
+
-
CH
RM-SXVM50JREMOTECONTROL
1Use the CURSOR 5/∞to move
to [YES],
then press ENTER.
moves to the
PASSWORD field.
PARENTAL LOCK
This DISC can t play now!
When selecting [NO],
press OPEN/CLOSE
to remove the disc.
Temporary
Level Change ?
YES
NO
- - - -
PASSWORD
PRESS ENTER
EXECUTE
2Enter your 4-digit password using the numeric
buttons (0 to 9).
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen.
Enter the correct password.
The Parental lock is released, and the unit starts playback
.
NOTE
• When you enter the wrong password more than 3 times
in step 2 above, moves to [NO] automatically and
CURSOR 5/∞do not work.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Care and handling of discs
How to handle discs
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a
disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may
cause the player to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesive on its surface.
Storage
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they
can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the
humidity or temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc,
wipe with a soft dry cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
CAUTION
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to
industry standards.)
These symptoms are caused by the discs, not by the malfunction of the unit.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting
service.
Symptom
Possible case
Remedy
Power does not come on.
Power plug is not inserted securely.
Plug in securely.
Too far from the unit.
More closer to the unit.
The tip of the remote unit is not pointed in
the right direction.
Point the infrared light- emitting window
toward the remote sensor on the front panel.
Remote control does not work.
Batteries are exhausted.
Replace the batteries with new ones.
Take out the batteries and insert them again in
the correct direction.
Battery polarity is incorrect.
Connection of video cable is incorrect.
Input selection of TV is incorrect.
Disc is not playable.
Connect the cable correctly.
Select correctly.
No picture is displayed on the
monitor.
Use a playable disc. (See page 12.)
Picture is not normal when using the
S-VIDEO jack.
The unit is set to feed the RGB signals
(instead of the S-video signals).
Make the unit feed the S-video signals
The unit is connected to a VCR directly
and the copyguard function is activated.
Connect the unit so that the picture signal
flows directly to the TV.
Picture is noisy.
Connection is incorrect.
Check the connections.
Select correctly.
No audio is reproduced.
Input selection of amplifier is incorrect.
No audio is reproduced when
playing back a DVD disc recorded
with 96 kHz, linear PCM audio.
The audio signal is derived from the unit's
DIGITAL OUT.
Use the AUDIO OUT when playing back such
discs.
Sound is distorted or noise is
generated.
Disc is dirty.
Wipe the disc surface.
MONITOR TYPE is not correctly set.
Television is not correctly set.
Select monitor type correctly. (See page 41.)
Set the television correctly.
Picture does not fit the television
screen.
Microcomputer malfunction due to
lightning or static electricity.
Turn off the power and unplug the power
cord, then connect the power cord again.
Operation is not possible.
Moisture condensation caused by a
sudden change of temperature or
humidity.
Turn off the power, then turn it on a few hours
later.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Specifications
General
Readable discs:
Video format:
DVD VIDEO, Audio CD, Video CD
PAL
Other
Power requirements:
Power consumption:
Mass:
AC 230 V
, 50 Hz
17 W (POWER ON), 3.1 W (STANDBY mode)
4.8 kg (10.6 lbs)
Dimensions (W x H x D):
435 mm x 127 mm x 329 mm
(17-3/16 inch x 5 inch x 13 inch)
Video outputs
VIDEO OUT (pin jack):
S-VIDEO OUT (S jack):
1.0 Vp-p (75 Ω)
Y Output:
1.0 Vp-p (75 Ω)
286 mVp-p (75 Ω)
C Output:
0.7 Vp-p (75 Ω)
500 Lines
RGB out:
Horizontal resolution:
Audio outputs
ANALOG OUT (pin jack):
DIGITAL OUT: (COAXIAL):
(OPTICAL):
2.0 Vrms (10 kΩ)
0.5 Vp-p (75 Ω termination)
–21 dBm to –15 dBm (Peak)
Audio characteristics
Frequency response:
CD
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
DVD (sampling frequency 96 kHz):
16 bit: More than 98 dB
2 Hz to 22 kHz
2 Hz to 44 kHz
Dynamic range:
20 bit: More than 106 dB
24 bit: More than 106 dB
Wow and flutter:
Total harmonic distortion:
Unmeasurable (less than 0.002%)
Less than 0.002%
* Specifications and appearance subject to change without prior notice.
Appendix A:Table of languages and their abbreviations
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select
the desired language, select the abbreviation corresponding the language you want to.
FA
FI
FJ
Persian
Finnish
Fij i
Faroese
Frisian
KM Cambodian
OM (Afan) Oromo
SU
SV
Sundanese
Swedish
AA
AB
AF
Afar
Abkhazian
Afrikaans
KN
KO
KS
KU
KY
LA
LN
LO
LT
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
OR
PA
PL
PS
PT
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
SW Swahili
FO
FY
GA Irish
GD Scots Gaelic
GL
GN Guarani
GU Gujarati
HA
HI
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
Tamil
Telugu
Tajik
AM Ameharic
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
QU Quechua
RM Rhaeto-Romance
Thai
Galician
Lingala
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Laothian
Lithuanian
Latvian, Lettish
RN
RO
RU
Kirundi
Rumanian
Russian
Hausa
Hindi
Croatian
LV
MG Malagasy
MI Maori
RW Kinyarwanda
HR
SA
SD
SG
SH
SI
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
HU Hungarian
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
HY
IA
IE
IK
IN
IS
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
TW Twi
UK
UR
UZ
VI
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
SK
SL
Slovenian
SM Samoan
IW
JI
SN
SO
SQ
SR
SS
ST
Shona
VO
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Yiddish
Somali
Albanian
Serbian
Siswati
Sesotho
WO Wolof
JW Javanese
NE
NL
Nepali
Dutch
XH
YO
ZU
Xhosa
Yoruba
Zulu
KA
KK
KL
Georgian
Kazakh
Greenlandic
EO
ET
EU
NO Norwegian
OC Occitan
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix B:Country code list for parental lock
This list is used for the parental Lock operation. For details, see page 43.
ES Spain
ET Ethiopia
LB Lebanon
LC Saint Lucia
SA Saudi Arabia
AD Andorra
AE United Arab Emirates
AF Afghanistan
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
FI
FJ
Finland
Fiji
LI
Liechtenstein
AG Antigua and Barbuda
LK Sri Lanka
LR Liberia
LS Lesotho
FK Falkland Islands
AI
Anguilla
Micronesia
AL Albania
AM Armenia
FM
(Federated States of)
FO Faroe Islands
FR France
LT
Lithuania
SI
Slovenia
AN Netherlands Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
LU Luxembourg
LV Latvia
LY Libyan Arab
MA Morocco
Svalbard and Jan
Mayen
SJ
FX France, Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
GE Georgia
GF French Guiana
GH Ghana
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
SO Somalia
SR Suriname
ST Sao Tome and Principe
SV El Salvador
SY Syrian Arab Republic
SZ Swaziland
MC Monaco
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
AU Australia
AW Aruba
AZ Azerbaijan
BA Bosnia and
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
GI
Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
Turks and Caicos
Islands
TC
Northern Mariana
Islands
MP
TD Chad
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
French Southern
Territories
TF
South Georgia and the
BI
Burundi
GS
South Sandwich
GT Guatemala
GU Guam
BJ Benin
TG Togo
TH Thailand
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
TJ
Tajikistan
GW Guinea-Bissau
GY Guyana
HK Hong Kong
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
MX Mexico
Heard Island and
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
HM
McDonald Islands
HN Honduras
HR Croatia
TT Trinidad and Tobago
TV Tuvalu
HT Haiti
HU Hungary
Taiwan, Province of
China
NF Norfolk Island
NG Nigeria
TW
ID
IE
IL
Indonesia
Ireland
Israel
CC Cocos (Keeling) Islands
Tanzania, United
NI
Nicaragua
Central African
Republic
CG Congo
TZ
CF
Republic of
UA Ukraine
UG Uganda
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
PL Poland
IN
India
British Indian Ocean
Territory
CH Switzerland
IO
United States Minor
CI
Cô te d’Ivoire
UM
Outlying Islands
US United States
UY Uruguay
IQ
IR
Iraq
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
Iran (Islamic Republic
of)
UZ Uzbekistan
IS
IT
Iceland
Italy
Vatican City State
(Holy See)
VA
JM Jamaica
JO Jordan
JP Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
Saint Vincent and the
Grenadines
VC
VE Venezuela
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
Saint Pierre and
Miquelon
PN Pitcairn
VN Vietnam
VU Vanuatu
PM
KI
Kiribati
KM Comoros
KN Saint Kitts and Nevis
Wallis and Futuna
Islands
WF
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
WS Samoa
YE Yemen
Korea, Democratic
KP
People’s Republic of
KR Korea, Republic of
KW Kuwait
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
KY Cayman Islands
KZ Kazakhstan
Lao People’s
Democratic Republic
LA
ZW Zimbabwe
49
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured.
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and
interconnections between pieces of equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing
connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of
your equipment.
Do be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or
if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it
is designed for unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do
this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your
hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete
safety always fit the manufacturer’s approved stand or legs with the fixings provided according
to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
—NEVER let anyone, especially children, push anything into holes, slots or any other opening in
the case — this could result in a fatal electrical shock.;
—NEVER guess or take chances with electrical equipment of any kind — it is better to be safe
than sorry!
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0401AOMUBNJEM
EN.
Download from Www.Somanuals.com. All Manuals Search And Download.
|