JVC DVD Player HR XVC29UJ User Manual

DVD PLAYER &  
VIDEO CASSETTE RECORDER  
HR-XVC29UJ  
For Customer Use:  
Enter below the Model No. and  
Serial No. which are located on the  
rear of cabinet. Retain this  
INSTRUCTIONS  
information for future reference.  
Model No.  
Serial No.  
LPT0966-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
3
Use only discs marked with the following.  
Failure to heed the following precautions may result in  
damage to the unit, Remote or video cassette.  
1. DO NOT place the unit —  
DVD  
(8 cm /12 cm disc)  
— in an environment prone to extreme temperatures  
or humidity.  
— in direct sunlight.  
— in a dusty environment.  
Video CDs  
(8 cm /12 cm disc)  
— in an environment where strong magnetic fields are  
generated.  
— on a surface that is unstable or subject to vibration.  
2. DO NOT block the unit’s ventilation openings or  
holes.  
Audio CDs  
(8 cm /12 cm disc)  
(If the ventilation openings or holes are blocked by a  
newspaper or cloth, etc., the heat may not be able to  
get out.)  
SVCD  
(8 cm /12 cm disc)  
3. DO NOT place heavy objects on the unit or Remote.  
4. DO NOT place anything which might spill on top of  
the unit or Remote.  
(If water or liquid is allowed to enter this equipment,  
fire or electric shock may be caused.)  
5. DO NOT expose the apparatus to dripping or  
splashing.  
6. DO NOT use this equipment in a bathroom or places  
with water. Also DO NOT place any containers filled  
with water or liquids (such as cosmetics or medicines,  
flower vases, potted plants, cups, etc.) on top of this  
unit.  
7. DO NOT place any naked flame sources, such as  
lighted candles, on the apparatus.  
8. AVOID violent shocks to the unit during transport.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
“DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital  
Theater Systems, Inc.  
Cassettes marked “VHS” (or “S-VHS”) can be used with this  
unit. However, S-VHS recording is not possible with this  
model.  
This model is equipped with SQPB (S-VHS QUASI  
PLAYBACK) that makes it possible to play back S-VHS  
recordings with regular VHS resolution.  
MOISTURE CONDENSATION  
Moisture in the air will condense on the unit when you  
move it from a cold place to a warm place, or under  
extremely humid conditions—just as water droplets form  
in the surface of a glass filled with cold liquid. Moisture  
condensation on the head drum will cause damage to the  
tape. In conditions where condensation may occur, keep  
the unit turned on for a few hours to let the moisture dry.  
HQ VHS is compatible with existing VHS equipment.  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents and  
other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing users only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or disassembly  
is prohibited.  
ATTENTION  
To mobile phone users:  
Using a mobile phone in the vicinity of the unit may  
cause picture vibration on the TV screen or change  
the screen to a blue back display.  
When the equipment is installed in a cabinet or a shelf,  
make sure that it has sufficient space on all sides to allow  
for ventilation (10 cm or more on both sides, on top and  
at the rear.)  
On placing the unit:  
Some TVs or other appliances generates strong  
magnetic fields. Do not place such appliance on top  
of the unit as it may cause picture disturbance.  
When discarding batteries, environmental problems must  
be considered and the local rules or laws governing the  
disposal of these batteries must be followed strictly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
EN  
CONTENTS  
DISC INFORMATION  
5
EDITING (VCR DECK)  
66  
About Discs ......................................................... 5  
Edit From A Camcorder .....................................66  
Edit To Or From Another Video Recorder ..........67  
Dubbing (from DVD to VCR) .............................68  
INDEX  
8
EDITING (DVD DECK)  
69  
INSTALLING YOUR NEW UNIT  
12  
Digital Audio Dubbing ......................................69  
Basic Connections ............................................. 12  
S-VIDEO Connection (DVD deck only) ............. 13  
Component Video Connection  
REMOTE  
70  
(DVD deck only) ............................................ 14  
Remote Control Functions .................................70  
Connecting To A Dolby Digital Decoder or  
An Amplifier With A Built-in DTS  
INITIAL SETTINGS  
15  
(DVD deck only) .................................... 71  
Plug & Play Set .................................................. 15  
Monitor Set (DVD deck) .................................... 16  
Language ........................................................... 18  
Clock Set ........................................................... 22  
Tuner Set ........................................................... 24  
SUBSIDIARY SETTINGS  
72  
Mode Set (VCR deck) .........................................72  
Mode Set (DVD deck) ........................................75  
Child Lock .........................................................78  
Scan Mode Set (DVD deck) ...............................78  
OPERATIONS ON VCR DECK  
26  
Basic Playback .................................................. 26  
Playback Features .............................................. 27  
Basic Recording ................................................ 31  
Recording Features ............................................ 32  
Express Timer Programming .............................. 34  
Satellite Auto Recording .................................... 39  
TROUBLESHOOTING  
QUESTIONS AND ANSWERS  
SPECIFICATIONS  
79  
84  
85  
86  
OPERATIONS ON DVD DECK  
40  
LIST OF TERMS  
Basic Playback .................................................. 40  
Playback Features .............................................. 41  
Using the on-screen bar .................................... 46  
Parental Lock .................................................... 56  
About MP3 Disc ................................................ 60  
MP3 Playback ................................................... 61  
About JPEG Disc ............................................... 63  
JPEG Playback ................................................... 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
5
DISC INFORMATION  
About Discs  
Playable Discs  
Unplayable Discs  
The following types of discs cannot be played using this unit.  
Do not attempt to play back any kind of disc that is damaged  
(cracked, warped, or repaired with adhesive tape) or discs in  
unusual shapes (heart-shaped, octagonal, or other forms). If such  
discs are accidentally played back, it may cause noise that can  
lead to speaker damage.  
CD-ROM discs (including PHOTO-CD)  
DVD AUDIO discs  
Super Audio CDs (SACD)  
You can use the discs with the following logos for playback  
only.  
DVD-RW discs recorded in VR format  
DVD-RAM  
Discs which have a region number other than “1”  
DVD VIDEO  
(8 cm /12 cm disc)  
Video CD/Super Video CD  
(8 cm /12 cm disc)  
Region Number  
The world is divided into 6 regions for DVD VIDEO discs. DVD  
VIDEO discs are assigned a region number to indicate which  
region they may be played back in. A disc cannot be played  
back on this unit unless the region number of the disc matches  
that of the unit. The region number for this unit is “1”. Only discs  
whose region number includes “1” can be played back such as  
shown below.  
Audio CD  
(8 cm /12 cm disc)  
CD-DA  
files  
Examples of DVD VIDEO labels which can be played back  
using this unit.  
The following discs also can be played back.  
• DVD-R/RW discs recorded in DVD VIDEO format and  
finalized  
• CD-R/RW discs recorded in Super Video CD, Video CD or  
Audio CD format and finalized.  
• CD-R/RW discs recorded in MP3 format in accordance with  
the “ISO 9660” format. (See page 60 for details.)  
• CD-R/RW discs recorded in JPEG format in accordance with  
the “ISO 9660” format. (See page 63 for details.)  
Discs other than the above cannot be played back.  
Operation and audio quality of this unit are not guaranteed for  
discs that do not conform to the Compact Disc specification  
(CD-DA).  
Marks of discs in this instruction manual  
Allows operation  
with a DVD VIDEO  
disc.  
Allows operation  
with a Audio CD  
disc.  
Allows operation  
with a Video CD  
disc.  
Allows operation  
with a SVCD disc.  
Before you play back a CD, check for the CD logo and read  
the notes on the package to confirm that it conforms to the  
Compact Disc specification.  
Depending on the intentions of the author of the software,  
recording conditions of DVD discs and Video CD discs may  
be restricted. Since this unit plays back discs according to the  
intentions of the author of the software as indicated on the  
disc, some functions may not operate as commanded.  
When switching from the first layer to the second layer of  
double-layered DVD VIDEO discs, the image and sound may  
be momentarily distorted. This is not a malfunction.  
Allows operation  
with a disc  
including MP3 files.  
Allows operation  
with a disc  
including JPEG files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
EN  
DISC INFORMATION (cont.)  
DVD VIDEO Marks  
File Structure of Discs  
Sometimes marks are printed on a DVD disc and/or on its  
packaging to indicate information regarding the contents and  
functions of a disc. Check marks indicating the contents and  
functions of a disc. Note, however, that in some cases a disc  
may not include a mark even for a function it supports.  
DVD VIDEO  
Typically, DVD VIDEO discs are made up of larger units called  
“titles”. Each title has a number (title number) that can be used  
to select desired titles. Titles are further divided into units called  
“chapters”. Each chapter has a number (chapter number) that  
can also be used to select desired chapters. Note that some discs  
are not divided into titles and chapters.  
Marks related to video  
Title 1  
Title 2  
Mark  
Description  
Number of subtitles  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1 Chapter 2  
Audio CD/Video CD  
Number of angles  
Typically, Audio CD discs are divided into separate tracks each  
containing one song. Each track is assigned a number. For  
example, the third track is Track 3. The same is true for Video  
CD discs.  
Recorded under the standard 4:3 aspect  
ratio  
Track 1  
Track 2  
Track 3  
Track 4  
NOTE:  
Screen includes black bands at top and  
bottom of image which has a standard 4:3  
aspect ratio (letter box)  
Video CD discs that support Playback Control (PBC)  
The still image or motion image which follows a menu screen is  
called a “scene”. Each scene has a scene number.  
For more details, refer to “Locating a desired scene using the  
menu of the Video CD with PBC” (pg. 41).  
Video playback is in Wide video mode  
(16:9) on wide televisions, but in letter  
box on televisions with standard 4:3  
aspect ratio.  
Video playback is in Wide video mode  
(16:9) on wide televisions, but pan and  
scan is used on televisions with standard  
4:3 aspect ratio (either the left or right side  
of the image is cut-out).  
Marks related to audio  
Mark  
Description  
Number of audio tracks  
Dolby Digital mark  
Dolby Laboratories has developed a  
digital surround system for the home. This  
mark indicates that you may enjoy 5.1-  
channel audio (front left and right, center,  
rear left and right, and a channel for LFE  
(Low-Frequency Effects)).  
DTS (Digital Theater System)  
The DTS decoder on this unit enables you  
to enjoy DTS audio with the connected  
TV’s speakers by converting 5.1 channel  
audio signals into 2 channel signals (DTS  
Down Mixing). The decoder also outputs  
the original DTS 5.1 channel audio  
signals from the DIGITAL AUDIO OUT  
connector on this unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
7
Placing a Disc  
Care and Handling of Discs  
How to handle discs  
When handling a disc, do  
not touch the surface of the  
disc. Since discs are made  
of plastic, they are easily  
damaged. If a disc gets  
1 Open the disc tray.  
Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
dirty, dusty, scratched or  
warped, the images and  
sound will not be picked up  
x
correctly, and such a disc may cause the unit to malfunction.  
Label side  
Do not damage the label side, stick paper to or use any adhesive  
on its surface.  
Storage  
Pressing the button again closes the disc tray.  
Do not block the disc tray with your hand while it is opening  
or closing as this may result in hardware failure.  
Do not place unplayable discs or any object other than a disc  
in the disc tray.  
Do not press down strongly on the disc tray or place any  
heavy objects on it.  
Make sure that discs are kept in their cases. If discs are piled on  
top of one another without their protective cases, they can be  
damaged. Do not put discs in a location where they may be  
exposed to direct sunlight, or in a place where the humidity or  
temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
If there are fingerprints or other dirt  
adhering to a disc, wipe with a soft dry  
cloth, moving from the center outwards.  
If a disc is difficult to clean, wipe with a  
cloth moistened with water. Never use  
record cleaners, petrol, alcohol or any  
anti-static agents.  
2 Place the disc.  
Place the disc in the disc tray  
with the label side facing up.  
Since disc size changes depending  
on the disc to be played back, be  
sure to correctly align the disc with  
the grooves for its size. If the disc is  
not in its groove, it may be  
CAUTION  
scratched or otherwise damaged.  
To insert an 8 cm disc, place it  
according to the inner groove.  
Sometimes during playback, noise or images may be  
garbled. This is sometimes due to the disc. (It may not be up  
to industry standards.)  
These symptoms are caused by the discs, not by the  
malfunction of the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
EN  
INDEX  
FRONT VIEW  
A Power Button (POWER (1)) pg. 16  
B VCR Indicator pg. 26, 31  
C VHS Cassette Loading Slot  
D VCR/DVD Button pg. 26, 31, 40  
E Disc Tray  
F Stop Button (STOP (8)) pg. 26, 31, 40  
G DVD Indicator pg. 40  
K Video/Audio Input Connectors (VIDEO/AUDIO)  
pg. 66  
L Remote Sensor  
M Front Display Panel pg. 9  
N Record Button (REC (7)) pg. 31  
O Rewind Button (REW (3)) pg. 26, 27, 42  
P Fast Forward Button (FF (5)) pg. 26, 27, 42  
Q Channel Button (CH +/–) pg. 31  
R Progressive Scan Button (PROGRESSIVE SCAN)  
pg. 78  
H Play Button (PLAY (4)) pg. 26, 40  
I DVD Open/Close Button (OPEN/CLOSE (x))  
pg. 40  
J VHS Eject Button (EJECT (x)) pg. 26, 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
9
REAR VIEW  
A Region Number Label pg. 5  
B AC Power Cord pg. 12  
C S-video Output Connector (S VIDEO OUTPUT)*  
pg. 13  
F Digital Audio Output Connector  
(DIGITAL AUDIO OUT)* pg. 69  
G Component Video Output Connectors  
(COMPONENT VIDEO OUT)* pg. 14  
D Audio/Video Output Connectors (AUDIO/  
VIDEO OUTPUT) pg. 12, 13, 14, 67  
E Antenna Input Connector (VHF/UHF IN)  
pg. 12  
H Audio Output Connectors (AUDIO OUTPUT  
(L/R))*  
I Remote Pause Connector pg. 66  
J Antenna Output Connector (VHF/UHF OUT)  
pg. 12  
* These connectors are only for DVD deck.  
FRONT DISPLAY PANEL  
A Operation Mode Indicators  
B Channel/Clock  
C VCR Indicator pg. 32  
D Progressive Mode Indicator pg. 78  
E “Timer” Indicator (VCR deck only) pg. 35  
F Satellite Auto Recording Indicator (N) (VCR deck  
only) pg. 39  
Auxiliary Input Mode Display (F-1) (VCR deck  
only)  
Counter Display (VCR deck)  
Tape Speed (SP/EP) (VCR deck only)  
Multi-information window* (DVD deck)  
* The current group/title/track/chapter number(s), time and status  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
EN  
INDEX (cont.)  
ON-SCREEN DISPLAY (VCR deck)  
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (pg. 73), various operational  
indicators appear on the TV screen.  
For On-screen display for DVD deck, refer to “Using the on-screen bar” (pg. 46).  
A Operation Mode Indicators  
B Tape Speed (SP/EP)  
D Index number pg. 28  
E Tape Remaining Time Indicator pg. 33  
F Counter Display  
G Audio Mode Display pg. 30  
H SAP Indicator pg. 33  
I Stereo Program Indicator pg. 33  
J Day/Clock Display  
K Channel Position Number/Auxiliary Input  
Indicator (F-1)  
L “Cassette Loaded” Mark  
C Tape Position Indicator  
The tape position indicator  
appears on the TV screen  
when you press REW (3)  
or FF (5) from the Stop  
mode or perform an Index  
Search. (pg. 28) The  
position of “q” in relation to  
“B” (beginning) or “E” (end)  
shows you where you are  
Beginning  
End  
on the tape.  
NOTE:  
To recall an indication  
A Press ON SCREEN.  
Depending on the type of tape being used, the tape position  
indicator may not appear correctly.  
All indications corresponding to the current status are  
displayed for 5 seconds. After that, the counter  
information and RECORD/PAUSE if in the Record  
Pause mode, remain on the screen.  
B Press ON SCREEN again to clear the display.  
The RECORD/PAUSE indication remains on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
11  
L Stop Button (STOP (8)) pg. 26, 31, 40  
M Record Button (REC (7)) pg. 31  
N Reverse Skip/Index Button (SKIP/INDEX (2))  
pg. 28, 41  
REMOTE  
Review Button (  
O rt Button pg. 16  
)
TV/VCR Channel Button (TV/VCR CH +/–)  
See the left column  
P Set Up Button (SET UP) pg. 16  
Q 3D-Phonic Button (3D-PHONIC) pg. 44  
R TV Volume Button (TV VOL+/–) See the left  
column  
S DVD Button pg. 40  
T Power Button (POWER (1)) pg. 16, left  
column  
U TV Muting Button (MUTE) See the left column  
Audio Monitor Button (A.MONITOR)  
pg. 30, 54, 55  
V TV/VCR Button pg. 32, left column  
W Date Button (DATE +/–) pg. 34  
Subtitle Button (SUB TITLE) pg. 52  
Angle Button (ANGLE) pg. 53  
X Channel Button (CH +/–) pg. 31  
Y Programming Button (PROG.) pg. 34  
Z Timer Button (TIMER) pg. 35  
a Weekly Button (WEEKLY) pg. 35  
b Program Check Button (PROG. CHECK)  
pg. 36  
Return Button (RETURN) pg. 41  
c Satellite Auto Recording Button (REC LINK)  
pg. 39  
d +10 Button  
e Auxiliary Button (AUX) pg. 66  
f Fast Forward Button (FF (5)) pg. 26, 27, 42  
g Pause Button (PAUSE (9)) pg. 27, 31  
h Forward Skip/Index Button (SKIP/INDEX (6))  
pg. 28, 41  
i ENTER Button pg. 16  
Buttons with a small dot on the left side of the name (POWER  
(1), TV/VCR, TV/VCR CH +/–, TV VOL+/–, MUTE) can  
also be used to operate a JVC’s TV after setting the TV/VCR/  
DVD switch to the left.  
j w e Button pg. 16  
k Display Button (DISPLAY) pg. 33  
l Skip Search Button (SKIP SEARCH) pg. 28  
DVD Picture Button (DVD PICTURE) pg. 45  
A VCR Button pg. 26, 31  
B TV/VCR/DVD switch pg. 16  
C Menu Button (MENU) pg. 41  
D SP/EP Button pg. 31  
How To Use  
Before use, insert two AA size batteries into the Remote with  
the polarity ( and ) matched correctly as indicated on  
the battery compartment or on the lid.  
Top Menu Button (TOP MENU) pg. 41  
E Stop Time Button (STOP +/–) pg. 34  
On-Screen Button (ON SCREEN) pg. 10, 46  
F Start Time Button (START +/–) pg. 34  
Repeat Button (REPEAT) pg. 48, 62 65  
Zooming Button (ZOOM) pg. 43  
G Number Keys pg. 25, 31, 62  
H Daily Button (DAILY) pg. 35  
I Reset Button (C.RESET) pg. 33  
Cancel Button (CANCEL) pg. 37  
10 Button  
The Remote can operate most of your unit’s functions, as  
well as basic functions of TV sets of JVC. (See the left  
column)  
Point the Remote toward the remote sensor.  
The maximum operating distance of the remote control is  
about 8 m.  
NOTE:  
If the Remote doesn’t work properly, remove its batteries,  
wait a short time, replace the batteries and then try again.  
J Play Button (PLAY (4)) pg. 26, 40  
K Rewind Button (REW (3)) pg. 26, 27, 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
EN  
INSTALLING YOUR NEW UNIT  
C Connect the unit to TV.  
Basic Connections  
The connection method you use depends on the type of  
TV you have.  
Antenna or Cable  
RF Connection  
8To connect to a TV with NO AV input connectors —  
A Disconnect the TV antenna from the TV.  
B Connect the TV antenna cable to the VHF/UHF IN  
connector on the rear panel of the unit.  
Coaxial cable  
Flat feeder  
C Connect the supplied RF cable between the VHF/UHF  
OUT connector on the rear panel of the unit and the  
Matching transformer  
(not supplied)  
AV Connection  
8To connect to a TV with AV input connectors —  
AUDIO  
AC Outlet  
OUTPUT  
A Connect the antenna, unit and TV as per “RF  
Connection”.  
VIDEO OUTPUT  
AC Power Cord  
B Connect an optional audio/video cable between the  
AUDIO/VIDEO OUTPUT connectors on the rear  
panel of the unit and the TV’s audio/video input  
connectors.  
Set your TV to AV mode.  
For switching the TV’s mode, refer to the instruction manual of  
your television.  
To obtain high-quality pictures, you can also use the S-VIDEO  
connection or Component Video Connection. (DVD deck  
only) (pg. 13, 14)  
Back of unit  
VHF/UHF  
IN  
D Connect the unit to power source.  
Audio/video cable  
(not supplied)  
VHF/UHF OUT  
Plug the end of the AC power cord into an AC outlet. This  
unit performs Plug & Play Set automatically. (pg. 15)  
The clock and tuner channels will automatically be set when  
the antenna is connected and when the AC power cord is first  
connected to an AC outlet. (If “AUTO” and the channel  
indicator are displayed on the front display panel before the  
unit is powered on, the clock and tuner channels are being set  
automatically. Wait for the time to be displayed on the front  
display panel before turning on the unit.)  
To Audio/video  
input connectors  
RF cable  
(supplied)  
To 75 ohm  
Terminal  
E Set the VCR channel.  
TV  
The VCR channel is the channel on which you can watch  
the picture from the unit on the TV when only using RF  
connection.  
It’s essential that your unit be properly connected.  
With RF connection, set the VCR channel to “3 CH” or  
“4 CH”.  
The VCR channel is preset to “3 CH”. Set to “4 CH” if the  
Channel 3 is used for broadcasting in your area.  
With AV connection, set the VCR channel to “– CH” (off).  
To set the VCR channel, perform the following steps:  
THESE STEPS MUST BE COMPLETED BEFORE ANY  
VIDEO OPERATION CAN BE PERFORMED.  
A Check the contents.  
Make sure the package contains all of the accessories  
listed in “SPECIFICATIONS” on page 85.  
Before performing the following steps:  
Make sure there is no cassette inserted in the unit.  
Make sure the unit is turned on, then press VCR/  
DVD on the unit or VCR on the Remote so that the  
VCR indicator lights up.  
B Situate the unit.  
Place the unit on a stable, horizontal surface.  
A Press POWER (1) to turn off the unit, then press  
STOP (8) on the unit for more than 5 seconds. “3 CH”  
appears on the front display panel.  
B Press CH +/– on the Remote to select “3 CH”, “4 CH”  
or “– CH” (off), then press ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EN  
13  
8To connect to a TV with S-VIDEO/AUDIO input  
S-VIDEO  
Connection  
(DVD deck only)  
A Connect the unit to TV.  
A Connect the antenna, unit and TV as per “AV  
Connection”. (pg. 12)  
B Connect the unit’s S VIDEO OUTPUT (DVD)  
connector to the TV’s S-VIDEO input connector.  
B Connect the unit to power source.  
ATTENTION  
Be sure to connect the unit’s VIDEO OUTPUT (DVD/  
VCR) connector to the TV’s VIDEO input connector.  
Plug the end of the AC power cord into an AC outlet. This  
unit performs Plug & Play Set automatically. (pg. 15)  
The clock and tuner channels will automatically be set when  
the antenna is connected and when the AC power cord is first  
connected to an AC outlet. (If “AUTO” and the channel  
indicator are displayed on the front display panel before the  
unit is powered on, the clock and tuner channels are being set  
automatically. Wait for the time to be displayed on the front  
display panel before turning on the unit.)  
Antenna or Cable  
Coaxial cable  
Flat feeder  
C Set the VCR channel to off.  
Before performing the following steps:  
Make sure there is no cassette inserted in the unit.  
Make sure the unit is turned on, then press VCR/  
DVD on the unit or VCR on the Remote so that the  
VCR indicator lights up.  
Matching transformer  
(not supplied)  
AUDIO OUTPUT  
AC outlet  
VIDEO OUTPUT  
AC power  
cord  
A Press POWER (1) to turn off the unit, then press  
STOP (8) on the unit for more than 5 seconds. “3 CH”  
appears on the front display panel.  
S VIDEO OUTPUT  
B Press CH +/– on the Remote to select “– CH” (off),  
then press ENTER.  
NOTES:  
You can obtain high-quality S-VIDEO pictures.  
If your TV is not stereo-capable, use the unit’s AUDIO  
OUTPUT connectors to connect to an audio amplifier for  
Hi-Fi stereo sound reproduction.  
To operate the unit with your TV using the S-VIDEO  
connection, set your TV to its AV mode. You can also use the  
TV/VCR button on the unit’s Remote to set JVC TV to the AV  
mode.  
Back of unit  
VHF/UHF  
IN  
S-Video cable  
(not supplied)  
Audio/video  
cable  
(not supplied)  
VHF/UHF  
OUT  
For switching the TV’s mode, refer to the instruction manual of  
your television.  
Only DVD picture is output from S-VIDEO OUTPUT  
connector. (VCR picture is not output.)  
RF cable  
(supplied)  
To 75 ohm  
Terminal  
To S-VIDEO input  
connector  
TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
EN  
INSTALLING YOUR NEW UNIT (cont.)  
8To connect to a TV with component video input  
Component Video  
Connection  
A Connect the unit to TV.  
A Connect the aerial, unit and TV as per “AV  
Connection”. (pg. 12)  
B Connect the unit’s COMPONENT VIDEO OUT  
connectors to the TV’s component video input  
connectors.  
(DVD deck only)  
ATTENTION  
B Connect the unit to power source.  
Be sure to connect the unit’s VIDEO OUTPUT (DVD/  
VCR) connector to the TV’s VIDEO input connector.  
Plug the end of the AC power cord into an AC outlet. This  
unit performs Plug & Play Set automatically. (pg. 15)  
The clock and tuner channels will automatically be set when  
the antenna is connected and when the AC power cord is first  
connected to an AC outlet. (If “AUTO” and the channel  
indicator are displayed on the front display panel before the  
unit is powered on, the clock and tuner channels are being set  
automatically. Wait for the time to be displayed on the front  
display panel before turning on the unit.)  
Antenna or Cable  
Coaxial cable  
Flat feeder  
C Set the VCR channel to off.  
Matching transformer  
(not supplied)  
Before performing the following steps:  
Make sure there is no cassette inserted in the unit.  
Make sure the unit is turned on, then press VCR/  
DVD on the unit or VCR on the Remote so that the  
VCR indicator lights up.  
AUDIO OUTPUT  
AC outlet  
VIDEO OUTPUT  
COMPONENT VIDEO  
OUT  
AC power cord  
A Press POWER (1) to turn off the unit, then press  
STOP (8) on the unit for more than 5 seconds. “3 CH”  
appears on the front display panel.  
B Press CH +/– on the Remote to select “– CH” (off),  
then press ENTER.  
NOTES:  
You can obtain high-quality component video pictures.  
If your TV is not stereo-capable, use the unit’s AUDIO  
OUTPUT connectors to connect to an audio amplifier for  
Hi-Fi stereo sound reproduction.  
To operate the unit with your TV using the Component Video  
connection, set your TV to its AV mode. You can also use the  
TV/VCR button on the unit’s Remote to set JVC TV to the AV  
mode.  
For switching the TV’s mode, refer to the instruction manual of  
your television.  
By using the component video connection, you can view the  
images in the progressive mode. For switching to the  
progressive mode, refer to “Scan Mode Set (DVD deck)”  
(pg. 78).  
Back of unit  
VHF/UHF  
IN  
VHF/UHF  
OUT  
Audio/Video  
cable  
(not supplied)  
Component  
Video cable  
(not supplied)  
RF cable  
(supplied)  
To Component Video  
Input connector  
To 75 ohm  
Terminal  
TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
15  
INITIAL SETTINGS  
This unit sets the clock and tuner channels automatically  
when AC power cord is first connected to an AC outlet.  
The antenna cable must be connected for the Plug & Play  
setting.  
The time and date can be set automatically by the clock  
setting data transmitted from one of the regular TV  
broadcast channels. We call this TV channel the “host  
channel” and it is a PBS channel in your area.  
Plug & Play Set  
Auto Clock Set/Auto Tuner Set  
ATTENTION  
If you use a cable box, Plug&Play will not function; set the  
clock and tuner channels separately. (pg. 22 – 25)  
Depending on areas or reception conditions, the unit may  
not receive the Auto clock setting data from the PBS  
channel. If this function is taking a considerable amount of  
time, it may be necessary to perform the Semiauto or  
Manual Clock Set procedure.  
A Perform Plug & Play setup.  
Connect the antenna cable to the unit. (pg. 12) Then  
connect the AC power cord to an AC outlet. Do not turn  
on the unit.  
The clock and tuner channels will be set automatically.  
NOTES:  
Auto Clock Set is performed first.  
“AUTO” blinks on the front display panel during Auto Clock  
Set.  
Auto Channel Set is performed next. Auto Channel Set scans  
Channel Set, the channel numbers are displayed as they are  
When Plug & Play setting has been complete successfully, the  
correct clock time is displayed. If you perform Plug & Play  
setting successfully, there is no need to perform “Clock Set”  
(pg. 22) and “Tuner Set” (pg. 24). If, however, you want  
to add or delete channels, refer to “Manual Channel Set”  
(pg. 25).  
During Initial Auto Clock Set  
“AUTO” blinks.  
During Auto Channel Set  
The channel numbers are displayed  
as they are scanned and set.  
Plug&Play Completed  
The current time is displayed.  
* If an incorrect clock time or “– –:– –” appears on the front display panel, see “What to do if Plug & Play setting failed” below.  
INFORMATION  
If “AUTO CLOCK” is set to “ON” (pg. 23), the clock will be adjusted automatically by the host channel every hour (except  
11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock  
adjustment can only be performed when the unit is turned off. The clock will be adjusted just on these hours — on the time  
displayed on the front display panel, not on the actual real time.) The default setting of “AUTO CLOCK” is “ON”. (pg. 23)  
If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be  
What to do if Plug & Play setting failed  
adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform “Semiauto Clock Set” (pg. 23)  
or “Manual Clock Set” (pg. 23).  
If “– –:– –” appears on the front display panel, your antenna cable may not be connected to the unit or there may not be a Host  
PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the unit; the Plug &  
Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected  
correctly, perform “Manual Clock Set” (pg. 23) and “Auto Channel Set” (pg. 24) or “Manual Channel Set” (pg. 25).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
16  
EN  
INITIAL SETTINGS (cont.)  
A Turn on the unit.  
Monitor Set  
Press POWER (1).  
(DVD deck)  
B Select the DVD deck.  
You can select the monitor type depending the TV used  
when you play back DVD VIDEO discs recorded for  
wide-screen TVs.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
C Access the DVD Set Up menu screen.  
PICTURE  
A Press SET UP.  
B Press w e to select  
MONITOR TYPE  
4:3LB  
AUTO  
ON  
PICTURE SOURCE  
SCREEN SAVER  
FILE TYPE  
PICTURE”.  
AUDIO  
SELECT  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
ENTER  
D Select the mode.  
Press rt to move the  
highlight to “MONITOR  
TYPE”, then press ENTER.  
PICTURE  
MONITOR TYPE  
PICTURE SOURCE  
4:3LB  
AUTO  
ON  
SCREEN SAVER  
FILE TYPE  
AUDIO  
SELECT  
ENTER  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
E Select the mode setting.  
Press rt to select the desired setting, then press ENTER.  
F Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EN  
17  
* The default setting is bold in the table below.  
Pan&Scan/Letter Box  
In general, DVD VIDEO disc are produced for a wide-screen  
TV with 16:9 aspect ratio.  
Material with this ratio will not fit to a TV with 4:3 aspect  
ratio. There are two styles to display the image, “Pan&Scan”  
(PS) and “Letter Box” (LB).  
8 MONITOR TYPE  
16:9 (Wide television conversion):  
Select this when the aspect ratio of your TV is  
fixed to 16:9 (wide TV). The unit automatically  
adjusts the screen width of the output signal  
correctly when playing back a picture whose  
aspect ratio is 4:3.  
Pan&Scan  
The right and left side of the image are  
cut off. The image fills the screen.  
4:3 LB (Letter Box conversion):  
Select this when the aspect ratio of your TV is  
4:3 (conventional TV). While viewing a wide  
screen picture, the black bars appear on the  
top and the bottom of the screen.  
Letter Box  
Black bands appear at the top and  
bottom of the image. The image itself  
appears in 16:9 aspect ratio.  
4:3 PS (Pan&Scan):  
Select this when the aspect ratio of your TV is  
4:3 (conventional TV). While viewing a wide  
screen picture, the black bars do not appear;  
however, the left and right edges of the  
pictures will not be shown on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
EN  
INITIAL SETTINGS (cont.)  
On-screen Language Set (VCR deck)  
Language  
This VCR deck offers you the choice to view on-screen  
messages in 3 different languages.  
Turn on the TV and select the VCR channel (or AV  
mode).  
A Turn on the unit.  
Slide the TV/VCR/DVD switch to the right.  
Press POWER (1).  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Access the Main Menu screen.  
Press SET UP.  
D Access the Initial Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“INITIAL SET”, then press  
ENTER or e.  
E Select the language.  
Press rt to move the  
highlight bar (arrow) to  
“LANGUAGE”, then press  
ENTER or e repeatedly until  
the desired language is  
selected.  
F Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
19  
On-screen Language Set (DVD deck)  
This DVD deck offers you the choice to view on-screen  
messages in 3 different languages. You can change the  
language setting manually as required.  
A Turn on the unit.  
Press POWER (1).  
B Select the DVD deck.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Access the DVD Set Up menu screen.  
LANGUAGE  
A Press SET UP.  
B Press w e to select  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
OFF  
LANGUAGE”.  
ON SCREEN LANGUAGE ENGLISH  
SELECT  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
ENTER  
D Select the mode.  
Press rt to move the  
highlight to “ON SCREEN  
LANGUAGE”, then press  
ENTER.  
LANGUAGE  
MENU LANGUAGE  
ENGLISH  
ENGLISH  
OFF  
AUDIO LANGUAGE  
SUBTITLE  
ON SCREEN LANGUAGE ENGLISH  
SELECT  
ENTER  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
E Select the mode setting.  
Press rt to select the desired setting, then press ENTER.  
F Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
EN  
INITIAL SETTINGS (cont.)  
Menu/Audio/Subtitle Language Set  
(DVD deck only)  
Some DVD discs contain the DVD menu display, audio,  
subtitle in the multiple languages. With these discs, you  
can set the default language as you like.  
The procedure shows how to set “MENU LANGUAGE”  
on the DVD Set Up menu screen as an example.  
A Turn on the unit.  
Press POWER (1).  
B Select the DVD deck.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Access the DVD Set Up menu screen.  
LANGUAGE  
A Press SET UP.  
B Press w e to select  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
OFF  
LANGUAGE”.  
ON SCREEN LANGUAGE ENGLISH  
SELECT  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
ENTER  
D Select the mode.  
Press rt to move the  
highlight to “MENU  
LANGUAGE”, then press  
ENTER.  
LANGUAGE  
MENU LANGUAGE  
ENGLISH  
ENGLISH  
OFF  
AUDIO LANGUAGE  
SUBTITLE  
ON SCREEN LANGUAGE ENGLISH  
SELECT  
ENTER  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
E Select the mode setting.  
Press rt to select the desired setting, then press ENTER.  
See “Language Code List” (pg. 21).  
F Return to the normal screen.  
Press SET UP.  
NOTE:  
When the selected language is not available on the disc, the  
disc’s default menu language is played back.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
21  
Language Code List  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
Afar  
IK  
Inupiak  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
IN  
Indonesian  
Icelandic  
Hebrew  
IS  
IW  
JI  
Yiddish  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
SK  
BG  
BH  
BI  
SL  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
EU  
FA  
FI  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
Somali  
Kirghiz  
Albanian  
Serbian  
Siswati  
Latin  
Lingala  
SS  
ST  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
LV  
MG  
MI  
Bhutani  
Greek  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
OM  
OR  
PA  
PL  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay (MAY)  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
Esperanto  
Estonian  
Basque  
Persian  
TK  
TL  
Finnish  
Fiji  
TN  
TO  
TR  
TS  
Faroese  
Frisian  
Turkish  
Tsonga  
Tatar  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
TT  
TW  
UK  
UR  
UZ  
VI  
Twi  
Ukrainian  
Urdu  
Uzbek  
Hindi  
Vietnamese  
Volapuk  
Wolof  
HR  
HU  
HY  
IA  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
VO  
WO  
XH  
YO  
ZU  
PS  
PT  
QU  
RM  
Xhosa  
Yoruba  
Zulu  
IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22  
EN  
INITIAL SETTINGS (cont.)  
Perform clock setting only if the clock has not been set  
correctly by the Plug&Play setting.  
Clock Set  
Preparations  
Turn on the TV and select the VCR channel (or AV  
mode).  
A Turn on the unit.  
Slide the TV/VCR/DVD switch to the right.  
Press POWER (1).  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Access the Main Menu screen.  
Press SET UP.  
D Access the Initial Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“INITIAL SET”, then press  
ENTER or e.  
E Access the Clock Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“CLOCK SET”, then press  
ENTER or e.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EN  
23  
Semiauto Clock Set  
E Complete the Semiauto Clock Set.  
You can change the host channel/D.S.T. (Daylight Saving Time)/  
time zone setting manually. First follow steps A to E in  
“Preparations” (pg. 22), then go to the following steps.  
Press SET UP to return to normal screen.  
NOTE:  
IMPORTANT  
The time set previously will be erased when “AUTO CLOCK”,  
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.  
Turn off the unit after performing Semiauto Clock. “AUTO”  
will appear on the front display panel while the clock is  
being set. The current clock time will appear automatically  
when the clock setting is complete.  
A Set “AUTO CLOCK” to “ON”.  
Press ENTER or e repeatedly  
to move the highlight bar to  
“AUTO CLOCK”, then press  
rt so that “ON” is selected.  
AUTO DAYLIGHT SAVING TIME  
This function enables automatic adjustment of the unit’s  
clock at the start and end of Daylight Saving Time.  
With Auto DST activated, —  
— on the first Sunday of April at 2:00 AM, the clock is  
adjusted to 3:00 AM.  
— on the last Sunday of October at 2:00 AM, the clock is  
adjusted to 1:00 AM.  
B Select the host channel.  
Manual Clock Set  
You can either select “AUTO” or enter a PBS channel  
number.  
First follow steps A to E in “Preparations” (pg. 22), then go  
Press ENTER or e to move the highlight bar to “HOST  
CH”, then press rt repeatedly until “AUTO” or the  
desired PBS channel number is selected.  
to the following steps.  
A Set time, date and year.  
NOTE:  
Press rt until the desired  
time appears, then press  
ENTER or e. Set the date and  
year in the same way.  
Holding rt changes the time  
in 30-minute intervals, or  
changes the date in 15-day  
intervals.  
Some PBS channels do not transmit clock setting data.  
C Select the D.S.T. mode.  
Press ENTER or e to move the highlight bar to “D.S.T.”,  
then press rt repeatedly until the desired setting is  
selected.  
AUTO: Select if you want to adjust your VCR’s clock  
automatically by the incoming signal from the  
host channel. Be sure to select the correct time  
zone manually in step D.  
B Select D.S.T. mode.  
Press ENTER or e to move  
the highlight bar to “D.S.T.”,  
then press rt to select the  
desired setting.  
ON:  
Adjustment will be made by the built-in clock  
itself.  
OFF: Select when Daylight Saving Time does not apply  
ON:  
Adjustment will be  
made by the built-in  
clock itself.  
to you.  
D Select the time zone.  
OFF: Select when Daylight  
Saving Time does not  
apply to you.  
Press ENTER or e to move the highlight bar to “TIME  
ZONE”, then press rt repeatedly until “AUTO” or the  
desired time zone is selected. Each time you press the  
button, the time zone changes as follows:  
C Start clock.  
{AUTO{ATLANTIC{EASTERN{CENTRAL{  
MOUNTAIN{PACIFIC{ALASKA{HAWAII{  
(back to the beginning)  
Press SET UP and normal screen appears.  
To make corrections any time during the process  
Press ENTER or e repeatedly until the item you want to change  
blinks, then press rt.  
NOTE:  
If an incorrect time is displayed by the Plug & Play function, you  
may be receiving the clock setting data of a PBS channel from an  
adjacent time zone or from an incorrect PBS channel from a  
cable TV system. If you selected “AUTO” for the host channel in  
step B, be sure to select the correct time zone manually.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
24  
EN  
INITIAL SETTINGS (cont.)  
Auto Channel Set  
Tuner Set  
Perform Auto Channel Set only if channels have not been set  
correctly by the Plug&Play setting.  
Turn on the TV and select the VCR channel (or AV  
mode).  
A Turn on the unit.  
Slide the TV/VCR/DVD switch to the right.  
Press POWER (1).  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Access the Main Menu screen.  
Press SET UP.  
D Access the Tuner Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“TUNER SET”, then press  
ENTER or e.  
E Perform Auto Channel Set.  
Press rt to move the  
highlight bar (arrow) to  
“AUTO CHANNEL SET”, then  
press ENTER or e. You can  
automatically set the  
receivable channels in your  
area in the order of their  
frequencies.  
When Auto Channel Set is  
complete, “SCAN  
COMPLETED” appears on the  
TV screen.  
If the scan was unsuccessful,  
“SCAN COMPLETED–NO  
SIGNAL–” appears on screen.  
Check the connections and start  
again.  
INFORMATION  
The unit selects the correct band (TV or CATV) automatically  
during Auto Channel Set. The selected band will be  
displayed on the right side of “BAND” on the Tuner Set  
screen.  
F Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
25  
Manual Channel Set  
You can add the channels you want or delete the channels you  
do not want manually.  
A Turn on the unit.  
Press POWER (1).  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Access the Main Menu screen.  
Press SET UP.  
D Access the Tuner Set screen.  
Press rt to move the highlight bar (arrow) to “TUNER  
SET”, then press ENTER or e.  
E Access the Manual Channel Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“MANUAL CHANNEL SET”,  
then press ENTER or e.  
F Add or skip the desired channels.  
To add channels  
A Press the number keys to  
input a channel number you  
want to add.  
B Press ENTER or e to set to  
“ADD”.  
C Repeat A to B to add other  
channels.  
To skip channels  
A Press rt or the number keys to select a channel  
number you want to skip.  
B Press ENTER or e to set to “SKIP”.  
C Repeat A and B to skip other channels.  
G Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
26  
EN  
OPERATIONS ON VCR DECK  
A Load a cassette.  
Basic Playback  
Make sure the window side is up, the rear label side is  
facing you and the arrow on the front of the cassette is  
pointed toward the unit.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Do not apply too much pressure when inserting.  
If the record safety tab has been removed, playback begins  
automatically. Although the DVD deck is selected, the VCR  
deck is selected automatically if the DVD deck is in stop  
mode.  
Slide the TV/VCR/DVD switch to the right.  
The unit’s power comes on automatically and the counter is  
reset to 0:00:00.  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Find the program start point.  
If the tape is advanced past the start point, press REW  
(3). To go forward, press FF (5).  
D Start playback.  
Press PLAY (4).  
E Stop playback.  
Press STOP (8). Then press EJECT (x) on the VCR deck  
to remove the cassette.  
Usable cassettes  
Full-Size VHS  
T-30 (ST-30**)  
T-60 (ST-60**)  
T90  
T-120 (ST-120**)  
T-160 (ST-160**)  
ST-210**  
Compact VHS*  
TC-20 (ST-C20**)  
TC-30 (ST-C30**)  
TC-40 (ST-C40**)  
*
Compact VHS camcorder recordings can be played on  
this unit. Simply place the recorded cassette into a VHS  
Cassette Adapter and it can be used just like any full-sized  
VHS cassette.  
Clean the video heads using a dry cleaning  
cassette — ECL-3F — when:  
Rough, poor picture appears while a tape is played back.  
The picture is unclear or no picture appears.  
** This unit can record on regular VHS and Super VHS  
cassettes. However, it will record regular VHS signals  
only.  
“USE CLEANING CASSETTE” appears on the screen (only  
with “SUPERIMPOSE” set to “ON”). (pg. 73)  
• S-VHS recording is not possible with this unit.  
This unit is equipped with SQPB (S-VHS QUASI  
PLAYBACK) that lets you watch tapes recorded in the S-  
VHS format and the SP mode with regular VHS  
resolution.  
NOTE:  
The heads get dirty in the following cases:  
in an environment prone to extreme temperature or  
humidity  
• SQPB does not deliver Super VHS resolution.  
in a dusty environment  
flaw, dirt or mold on video tapes  
continuous usage for a long time  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
27  
Still Picture/Frame-By-Frame  
Playback  
Playback Features  
1 Pause during playback.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Press PAUSE (9).  
If there is vertical jitter, press CH +/– on the Remote or on the  
Slide the TV/VCR/DVD switch to the right.  
unit to correct the picture.  
2 Activate frame-by-frame playback.  
Press PAUSE (9) to advance a still picture.  
CH +/–  
Slow Motion  
1 Pause during playback.  
Press PAUSE (9).  
2 Activate slow motion playback.  
Press and hold PAUSE (9) for 2 seconds, then release.  
Press PAUSE (9) and release again to return to still  
picture.  
NOTE:  
During slow motion playback, some noise may appear on the  
TV screen. Press CH + or on the Remote or on the unit to  
eliminate the noises.  
Variable Speed Search  
During playback, press FF (5) for forward variable  
speed search, or REW (3) for reverse variable speed  
search.  
The speed changes for each direction by pressing REW (3)  
and FF (5) repeatedly.  
When pressing FF (5):  
(SP): +5x{+7x  
(EP): +11x{+21x  
When pressing REW (3):  
Once REW (3) is pressed, reverse search starts in –1x  
normal playback speed. After this process, each press of REW  
(3) changes the search speed between –5x and –7x in SP  
mode, –11x and –21x in EP mode.  
(SP): –1x]–5x{–7x  
(EP): –1x]–11x{–21x  
To resume normal playback, press PLAY (4).  
ATTENTION  
In the search, still, slow-motion or frame-by-frame playback  
mode,  
the picture will be distorted.  
the noise bars will appear.  
there may be a loss of color.  
you cannot hear the sound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
EN  
OPERATIONS ON VCR DECK (cont.)  
Index Search  
Your unit automatically marks  
index codes at the beginning of  
each recording. This function gives  
you quick access to any one of 9  
index codes in either direction.  
NOTE:  
Before starting, make sure the unit  
is in the Stop mode.  
Activate Index Search.  
Press INDEX (2) or INDEX (6). “INDEX –1” or  
“INDEX 1” is displayed on the TV screen and search  
begins in the corresponding direction.  
To access index codes 2 through 9, press INDEX (2) or  
INDEX (6) repeatedly until the correct index number is  
displayed.  
Example:  
To locate the beginning of B from the current position, press  
INDEX (2) twice.  
To locate the beginning of D from the current position, press  
INDEX (6) once.  
Current position  
Index number  
When the specified index code is located, playback begins  
automatically.  
Instant ReView  
Simply by pressing a single button, the unit power comes on,  
rewinds, and begins playback of the last timer-recorded  
program. If you have several programs recorded, you can easily  
access any of them.  
Skip Search  
During playback, press SKIP SEARCH 1 to 6 times to skip  
over unwanted sections.  
NOTE:  
Before starting, make sure that the unit is off and that the Timer  
mode is disengaged.  
Each press initiates a 30-second period of fast-motion  
playback. Normal playback resumes automatically.  
Activate Instant ReView.  
Press  
. The unit power comes on and the unit  
To resume normal playback during a Skip Search,  
press PLAY (4).  
searches for the index code indicating the start of the last  
timer-recorded program. Once it’s found, playback  
begins automatically.  
To watch the first of the 3 programs, press  
three  
times. The unit searches and begins playback automatically.  
You can access a program as far as 9 index codes away from  
the current tape position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
29  
Next Function Memory  
x
The Next Function Memory “tells” the unit what to do after  
rewinding. Before continuing, make sure the unit is in the Stop  
mode.  
a- For Automatic Start Of Playback  
Press REW (3), then press PLAY (4) within  
2 seconds.  
b- For Automatic Power Off  
Press REW (3), then press POWER (1) within  
2 seconds.  
c- For Automatic Timer Standby  
Press REW (3), then press TIMER within 2 seconds.  
d- For Automatic Cassette Ejection After Tape Rewind  
Press REW (3), then press EJECT (x) within 2  
seconds.  
Repeat Playback  
Your unit can automatically play back the whole tape 100 times  
repeatedly.  
1 Start playback.  
Press PLAY (4).  
2 Activate Repeat Playback.  
Press PLAY (4) and hold for over 5 seconds, then  
release.  
The Play indicator ($) on the front display panel blinks  
slowly.  
After playing back a tape 100 times, the unit stops  
automatically.  
3 Stop Repeat Playback.  
Press STOP (8) at any time.  
Pressing PLAY (4), REW (3), FF (5) or PAUSE (9) also  
stops Repeat Playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
EN  
OPERATIONS ON VCR DECK (cont.)  
Manual Tracking  
CH +/–  
Your unit is equipped with automatic tracking control. During  
playback, you can override this and adjust the tracking manually  
by pressing the CH buttons.  
1 Override automatic tracking.  
During playback, press SP/EP on the Remote.  
2 Adjust the tracking manually.  
Press CH + or on the Remote or on the unit.  
Press SP/EP again to return to automatic tracking.  
NOTE:  
When a new tape is inserted, the unit enters the automatic  
tracking mode automatically.  
Soundtrack Selection  
Your unit is capable of recording three soundtracks (HI-FI L,  
HI-FI R and NORM) and will play back the one you select.  
During Playback  
Pressing A.MONITOR changes the soundtrack as follows:  
You can also select the soundtrack on the Function Set screen.  
(pg. 74)  
TRACK  
USE  
On-Screen Display  
H I-F I  
Hi-Fi sound is played back  
Sound on the left Hi-Fi channel is  
played back  
H I-F I L  
Sound on the right Hi-Fi channel is  
played back  
H I-F I R  
NORM  
Sound on the normal track is played  
back  
Both sounds on the Hi-Fi track and  
normal track are mixed and played  
back  
NORM  
H I-F I  
NOTES:  
“HIFI” should normally be selected. In this mode, Hi-Fi stereo  
tapes are played back in stereo, and the normal audio track is  
played back automatically for tapes with only normal audio.  
“SUPERIMPOSE” must be set to “ON” or the on-screen  
displays will not appear. (pg. 73)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
31  
A Load a cassette.  
The unit’s power comes on automatically and the counter is  
reset to 0:00:00.  
Basic Recording  
Insert a cassette with the record safety tab intact.  
Turn on the TV and select the VCR channel (or AV  
mode).  
B Select the VCR deck.  
Slide the TV/VCR/DVD switch to the right.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Choose a program.  
Press CH +/– or the number keys to select the channel  
you wish to record.  
D Set the tape speed.  
Press SP/EP. The current setting appears on the front  
display panel or TV screen. Press SP/EP again to change  
the setting while the tape speed is displayed on the TV  
screen.  
E Start recording.  
Press and hold REC (7) and press PLAY (4) on the  
Remote, or press REC (7) on the unit.  
F Pause/Resume recording.  
Press PAUSE (9). Press PLAY (4) to resume recording.  
You can select channel during the Record Pause mode.  
G Stop recording.  
Press STOP (8). Then press EJECT (x) on the VCR deck  
to remove the cassette.  
Recording Resume Function  
If there is a power outage during recording, Instant Timer  
Recording or timer recording (pg. 31, 32, 34), the  
recording will resume automatically when power is restored  
to the unit unless the unit’s memory backup has expired.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
32  
EN  
OPERATIONS ON VCR DECK (cont.)  
Record One Program While Watching  
Another  
Recording Features  
If your unit is connected to the TV via the AV connection,  
press TV/VCR. The VCR indicator on the front display  
panel and the TV broadcast being recorded disappear.  
Once recording is in progress, all you need to do is to set  
the channel controls on the TV for the station you wish to  
view.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
The program selected with the TV’s channel controls appears  
on the TV screen, while the one selected with the unit’s CH  
buttons is recorded on the tape.  
NOTE:  
You can also use the DVD deck in the following cases. Before  
use, be sure to turn on the unit and select the DVD deck.  
During recording  
During timer recording  
During timer standby mode  
Instant Timer Recording (ITR)  
This easy method lets you record for from 30 minutes to 6 hours  
(selectable in 30-min. increments), and shuts the unit off after  
recording is finished.  
1 Start recording.  
Press REC (7) on the unit.  
2 Engage the ITR mode.  
Press REC (7) again. “” blinks and “0:30” appears on  
the front display panel.  
3 Set the recording duration.  
If you want to record for more than 30 minutes, press  
REC (7) to extend the time. Each press extends recording  
time by 30 minutes.  
Accidental erasure prevention  
To prevent accidental recording on a recorded cassette,  
remove its safety tab. To record on it later, cover the hole  
with adhesive tape.  
NOTES:  
You can only perform ITR using the REC (7) button on the  
unit’s front panel.  
Still picture playback stops automatically after 5 minutes to  
protect the heads.  
When the end of the tape is reached during timer recording,  
the unit stops and “” and “$” blink on the front display  
panel.  
When the end of the tape is reached during timer recording or  
Instant Timer Recording, the unit is turned off and “” and  
$” blink on the front display panel.  
Record safety tab  
During Instant Timer Recording, any other timer programmed  
recording won’t start even if their start time has come. In such  
a case, the timer programmed recording starts (if the end time  
of the timer programmed recording is set after the end of  
Instant Timer Recording) after the Instant Timer Recording  
finishes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
33  
Elapsed Recording Time Indication  
1 Set the counter display.  
Press DISPLAY until a counter reading appears on the  
front display panel.  
2 Reset the counter.  
Press C.RESET before starting recording or playback.  
The counter is reset to “0:00:00” and shows the exact elapsed  
time as the tape runs. You can check the exact time of a  
recording or playback.  
Tape Remaining Time  
Press DISPLAY until the time remaining on the tape  
appears.  
The front display panel shows the tape remaining time with “:”  
blinking.  
By pressing the DISPLAY button, you can change display to  
show the channel position*, clock time, counter reading or  
tape remaining time.  
* Channel position is not displayed during playback.  
NOTES:  
When you press ON SCREEN, the on-screen display appears  
on the TV screen for 5 seconds, then the displays other than  
the counter disappears. To clear the counter display, press ON  
SCREEN.  
Depending on the type of tape being used, the tape remaining  
time reading may not appear right away, or is not correct.  
“– –:– –” may sometimes appear with “:” blinking, or the  
display may blink on occasion.  
Second Audio Recording  
This unit’s built-in MTS decoder enables reception of  
Multichannel TV Sound broadcast. To record a SAP program  
received, set “2ND AUDIO RECORD” to “ON”. (pg. 74)  
NOTE:  
When the channel is changed on the unit;  
The “STEREO” indicator appears on the screen for about  
5 seconds if the program is a stereo broadcast.  
The “SAP” indicator appears on the screen for about 5 seconds  
if the program is a SAP broadcast.  
Both indicators appear when a stereo program is accompanied  
by SAP sound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
EN  
OPERATIONS ON VCR DECK (cont.)  
Example: To timer-record the program from 8:00 PM to  
10:00 PM on 24th December, on channel 12.  
Express Timer  
Programming  
A Select the VCR deck.  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the unit  
Before performing Express Timer Programming:  
Make sure that the unit’s built-in clock is set properly.  
Insert a cassette with the safety tab in place. The unit will  
come on automatically.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
Turn on the TV and select the VCR channel (or AV mode).  
Slide the TV/VCR/DVD switch to the right.  
B Access the Program screen.  
Press PROG.. (If you’re just  
starting out, “PROGRAM 1”  
appears.)  
C Enter the program start time.  
Press START +/– to enter the  
time you want recording to  
start.  
Press and hold START +/– to  
move in 30-minute  
increments, or press and  
release repeatedly to move  
1 minute at a time.  
D Enter the program stop time.  
Press STOP +/– to enter the time you want recording to  
stop.  
Press and hold STOP +/– to move in 30-minute increments, or  
press and release repeatedly to move 1 minute at a time.  
E Enter the program date.  
Press DATE +/–.  
The current date appears on the TV screen. The date you enter  
appears in its place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EN  
35  
NOTES:  
F Enter the channel position.  
You can program this unit to timer-record as many as 8  
programs. If you try to program the unit to record a ninth,  
“PROGRAM FULL” appears on the TV screen. To record the  
extra program, you must first cancel any unnecessary  
programs. (pg. 37)  
Programs that start after midnight must have the next day’s  
date.  
Press CH +/–.  
G Set the tape speed.  
Press SP/EP.  
Cable Box or DBS Receiver Users  
To timer-record a satellite broadcast using Express Timer  
Programming:  
A Perform steps A I. Enter “F-1” for the channel position  
in step F.  
B Set the DBS receiver to the appropriate channel before  
the selected program begins.  
C Leave the DBS receiver’s power on.  
Press PROG. or ENTER. “PROGRAM COMPLETED”  
appears on the TV screen for about 5 seconds, then the  
normal screen appears. If “PROGRAM NOT  
COMPLETED PROGRAM OVERLAP” appears on the TV  
screen, see page 38.  
Repeat steps B H for each additional program.  
I Engage the unit’s timer mode.  
Press TIMER. The unit turns off automatically and “#”  
appears on the front display panel.  
To disengage the timer mode, press TIMER again.  
To Timer-Record Weekly Or Daily Serials:  
— anytime during steps C through G, press WEEKLY (number  
key “9”) for weekly serials or DAILY (number key “8”) for daily  
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears  
on the TV screen. Pressing the button again makes the  
corresponding indication disappear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
36  
EN  
OPERATIONS ON VCR DECK (cont.)  
Check, cancel and change programs  
A Disengage the timer mode.  
Press TIMER, then press POWER (1).  
B Access the Program Check screen.  
Press PROG. CHECK.  
C Access the Program screen.  
Press PROG. CHECK again  
to check more information.  
Each time you press  
PROG. CHECK, the next  
program’s information  
appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
37  
To cancel or change a program  
D Cancel or change a program.  
Press CANCEL to cancel a program. To change program  
settings, press the appropriate button: START +/–,  
STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”),  
WEEKLY (number key “9”) and/or SP/EP.  
E Return to the normal screen.  
Press PROG. CHECK as many times as necessary. If there  
are still some programs remaining, go on to step F.  
F Return to the timer mode.  
Press TIMER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
38  
EN  
OPERATIONS ON VCR DECK (cont.)  
When programs overlap each other  
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”  
appears, you have another program overlapping the program  
you have just made.  
The Program Check screen appears and conflicting programs  
will start blinking.  
Example: Program 1 (you have just made) and Program  
4 overlap each other.  
A Confirm the overlapping programs.  
Overlapping programs blink on the TV screen.  
B Select the program to modify.  
Press rt, then press ENTER or e.  
You can only select one of the overlapping programs.  
NOTE:  
If you do not mind this overlap, press PROG. to finish the timer  
program setting. The program with the lower program number  
will be recorded and the other one will not be recorded  
correctly. If no changes are made for approximately 1 minute,  
the unit will return to the normal screen.  
C Cancel or change program setting.  
To cancel a program, press CANCEL when the Program  
screen you do not want is shown. “PROGRAM  
COMPLETED” appears on the TV screen for about  
5 seconds, then the normal screen appears.  
ATTENTION  
If there is a conflict in the timer schedule and one  
program overlaps with another, only the parts shown  
below in gray will be recorded.  
To change a program, press the appropriate button:  
START +/–, STOP +/–, DATE +/–, CH +/–, DAILY  
(number key “8”), WEEKLY (number key “9”) and/or SP/  
EP when the Program screen on which you want to make  
changes is shown, then press ENTER. “PROGRAM  
COMPLETED” appears on the TV screen for about  
5 seconds, then the normal screen appears.  
Pattern 1: The program with the lower program number  
will be recorded.  
Program 1  
Program 2  
CH10  
CH40  
Not recorded  
NOTE:  
If the overlap is not yet solved, or another overlap occurs with  
the timer program setting after making the last correction on a  
program, the conflicting programs will be shown on the Program  
Check screen again. Repeat the above steps again until the  
overlap is solved.  
Pattern 2: The program starting earlier will be recorded.  
Program 1  
Program 2  
CH10  
CH40  
Not recorded  
Pattern 3: The program starting earlier will be recorded,  
followed by the remaining portion of the other  
program.  
Program 1  
CH10  
Program 2  
CH40  
Not recorded  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
39  
ATTENTION  
Be sure not to turn on the DBS receiver before the program  
is executed; otherwise, the unit will start recording when  
the DBS receiver’s power is turned on.  
Satellite Auto  
Recording  
If you have connected another appliance other than a DBS  
receiver to the AUDIO/VIDEO input (F-1) connector, be  
sure not to engage the Satellite Auto Recording mode;  
otherwise, the unit will start recording when the connected  
appliance’s power is turned on.  
Satellite Auto Recording and timer-recording cannot be  
done at the same time.  
This function allows you to automatically record a  
satellite program which is timer-programmed on your  
external DBS receiver. Connect a DBS receiver to the  
unit’s AUDIO/VIDEO input (F-1) connector and program  
the timer on the DBS receiver. The unit starts or stops  
recording by the signals input from the DBS receiver.  
After recording, the unit’s power shuts off automatically.  
You can also connect the cable box if it has a timer.  
Before performing the following steps:  
Make sure the DBS receiver is connected to the unit’s  
AUDIO/VIDEO input (F-1) connector.  
Program the timer on the DBS receiver.  
Insert a cassette with the safety tab in place.  
Slide the TV/VCR/DVD switch to the right.  
A Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
B Set the tape speed.  
Press SP/EP.  
C Engage the Satellite Auto Recording mode.  
Press and hold REC LINK for about 2 seconds. The “N”  
and “#” indicators light up and the unit turns off  
automatically.  
NOTES:  
Operation on the DVD deck are not possible when the Automatic Satellite Program Recording mode is engaged, or timer recording  
is in progress.  
To disengage the Satellite Auto Recording mode, press REC LINK. The “N” indicator goes off.  
If the unit’s power is off, it is not possible to engage the Satellite Auto Recording mode.  
In step C, if the “N” indicator does not light but instead blinks quickly even though your DBS receiver’s power is off, Satellite Auto  
Recording will not work properly with that DBS receiver*. If this is the case, perform “Express Timer Programming” (pg. 34) to  
timer-record a satellite program.  
* Some DBS receivers output signals even if the power is off. Satellite Auto Recording is not possible with those DBS receivers.  
The “N” indicator blinks while Satellite Auto Recording is in progress.  
For timer programming of the DBS receiver, refer to the instruction manual of the DBS receiver.  
Satellite Auto Recording is not possible if your DBS receiver does not have a timer.  
Pressing the unit’s POWER (1) button while Satellite Auto Recording is in progress turns off the unit’s power and disengages the  
Satellite Auto Recording mode.  
If there are more than one satellite programs you wish to record with Satellite Auto Recording, it is not possible to set different tape  
speeds for each program.  
Depending on the type of DBS receiver, the unit may not record a slight portion of the beginning of the program or may record  
slightly longer than the actual length of the program.  
If you engage the Satellite Auto Recording mode when the DBS receiver’s power is on, the unit will not start Satellite Auto Recording  
even though the “N” and “#” indicators blink. When the DBS receiver shuts off once and is turned back on again, the unit starts  
recording.  
You can also record a program from your cable system in the same way if the system has a timer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
40  
EN  
OPERATIONS ON DVD DECK  
C Press OPEN/CLOSE (x) on the DVD deck to close the  
disc tray.  
Pressing PLAY (4) also close the disc tray.  
Playback begins automatically if the auto-playback DVD disc  
is loaded. Although the VCR deck is selected, the DVD deck is  
selected automatically if the VCR deck is in stop mode.  
"no dc" appears on the front display panel when there is no  
disc present on the disc tray.  
Basic Playback  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
B Select the DVD deck.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Start playback.  
Press PLAY (4).  
Example: DVD VIDEO  
Title number  
Chapter number  
Elapsed time  
You can switch the display on the front display panel between  
the title number/chapter number and the elapsed time by  
pressing DISPLAY.  
It may take a few seconds to start playback.  
If you load a DVD disc whose region code does not match the  
DVD deck, “REGION CODE ERROR!” appears on the TV  
the menu display may appear on the TV screen after starting  
playback. In this case, select an item which you want to play  
back from the menu. Otherwise, the playback cannot go  
forward. Refer to “Locating a desired scene using the menu of  
the Video CD with PBC” (pg. 41) or “Locating a desired  
scene using the DVD menu” (pg. 41).  
D Pause playback.  
ATTENTION  
You can not use the DVD deck when the VCR deck is in  
the Automatic Satellite Recording standby and recording  
mode.  
Press PAUSE (9).  
To resume normal playback, press PLAY (4).  
You can use the DVD deck when the VCR deck is in the  
timer standby mode.  
To play back a MP3/JPEG disc, see pages 60 – 65.  
Press STOP (8). Press OPEN/CLOSE (x) on the DVD  
deck to open the disc tray, then remove the disc.  
Pressing PLAY (4) resume playback from the position where  
you stop playback. For details, see “Resume Function” on  
page 43.  
A Load the disc.  
A Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
NOTE:  
The unit’s power comes on automatically.  
B Place the disc in the disc tray.  
When you press OPEN/CLOSE (x) while the unit is turned off,  
the unit’s power comes on and the disc tray opens  
automatically.  
For details, refer to “Placing a Disc” (pg. 7).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
41  
Locating a desired scene using the  
DVD menu  
Playback Features  
Turn on the TV and select the VCR channel (or AV  
mode).  
DVD VIDEO discs may have two types of the menus; top menu  
and disc menu.  
Slide the TV/VCR/DVD switch to the right.  
Top menu  
DVD discs generally have their own menus which show the disc  
contents. These menus contain various items such as titles of a  
movie, names of songs, or artist information. You can locate a  
desired scene by using the top menu displayed on the TV screen.  
Press TOP MENU to access the top menu.  
Playback Control (PBC) Function  
— Locating a desired scene using the  
menu of the Video CD with PBC  
Disc menu  
DVD discs have the disc menu to select subtitle and audio  
language etc. for each title.  
Press MENU to access the disc menu.  
1 Access the DVD menu.  
Some Video CD discs supports the PBC function. PBC is an  
abbreviation of “PlayBack Control”. A Video CD disc recorded  
with PBC has its own menus, such as a list of the songs of the  
disc. You can locate a specific scene by using the menu.  
Press TOP MENU or MENU.  
1 Access the PBC menu.  
In stop mode  
Press PLAY (4).  
Depending on a disc, PBC  
menu may automatically  
appear on the TV screen by  
simply loading a disc on the  
unit. “Pbc” appears on the  
Example:  
2 Start playback.  
Press rt w e to select a desired item, then press  
ENTER.  
It may be possible to select the desired item using the number  
keys depending on the disc.  
front display panel.  
Example:  
NOTES:  
When “X” appears on the TV screen in step 1, the disc does  
not have a top menu or disc menu.  
Top menu or disc menu may not appear depending on the  
discs even if it is recorded in DVD VIDEO format and  
finalized. In that case, press STOP (8) to display the total  
number of titles on a disc, then press the appropriate number  
keys to select the desired title.  
2 Start playback.  
Press the appropriate number keys.  
The unit starts playback of the selected item.  
When “NEXT” or “PREVIOUS” appears on the TV screen:  
Pressing SKIP (6) advances to the next page.  
Pressing SKIP (2) returns to the previous page.  
You can return to the menu by pressing RETURN.  
The method of the operation is different depending on the  
disc.  
NOTES:  
If you want to playback a PBC-compatible Video CD disc  
without activating the PBC function, start playback by using  
the number keys instead of the PLAY (4) button.  
To activate the PBC function when a PBC-compatible Video  
CD disc is being played back without the PBC function, press  
TOP MENU or MENU, or press STOP (8) (press twice when  
“RESUME” is set to “ON”) then press PLAY (4).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
42  
EN  
OPERATIONS ON DVD DECK (cont.)  
Locating the start point of the item or  
skip the item  
Press SKIP (2) or SKIP (6) during playback.  
Example:  
To locate the beginning of item B from the current position,  
press SKIP (2) twice.  
To locate the beginning of item D from the current position,  
press SKIP (6) once.  
Current position  
The number you press the  
button  
When the specified item is located, playback begins  
automatically.  
NOTE:  
When you press SKIP (2) or SKIP (6), the counter display  
may appear instead of title number/chapter number depending  
on the discs.  
Variable Speed Search  
During playback, press FF (5) for forward variable  
speed search, or REW (3) for reverse variable speed  
search.  
The more times you press, the faster the playback picture  
moves.  
To resume normal playback, press PLAY (4).  
OR  
During playback, press and hold SKIP (6) for forward  
search, or press and hold SKIP (2) for reverse search.  
While you press and hold the button, the image is played back  
at 5x speed.  
To resume normal playback, release SKIP (2) or SKIP (6).  
NOTES:  
Actual speed may be different from that displayed on the TV  
screen depending on the discs.  
Playback sound is not heard in any variable speed search  
mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
43  
NOTES:  
Still Picture/Frame-By-Frame  
Playback  
Resume Function does not work on the Audio CD. It also may  
not work depending on the discs.  
If you stop the playback of a disc for which an resume point  
has already been memorized, the memory will be updated  
with the new resume point.  
When the unit memorizes a resume point, it also remembers  
audio language, subtitle and angle settings.  
This function may not works for some Video CD or SVCD.  
1 Pause during playback.  
Press PAUSE (9).  
2 Activate frame-by-frame playback.  
Zooming  
Press PAUSE (9) to advance a still picture.  
To resume normal playback, press PLAY (4).  
Press ZOOM during playback or while paused.  
Each press of ZOOM changes the magnification in the  
following steps:  
Slow Motion  
ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] ZOOM 3]  
ZOOM 4 ] ZOOM 5 ] ZOOM 6 ] (Back to the beginning)  
When a 16:9 aspect picture source is displayed on a 4:3  
aspect TV (conventional TV) in Letter Box conversion mode,  
the margins in black shown on top and bottom of the TV  
screen will be cropped and both left and right side parts of the  
picture will also be cropped. You may not move up or down  
the zoomed-in scene depending on the zooming  
magnification.  
During playback, press PAUSE (9), then press REW  
(3) for reverse slow motion playback, or FF (5) for  
forward slow motion playback.  
Each press of FF (5) changes the playback speed as follows:  
1/32]1/16]1/8]1/4]1/2  
Each press of REW (3) changes the playback speed as  
follows (only for DVD VIDEO discs):  
–1/32]–1/16]–1/8]–1/4]–1/2  
To resume normal playback, press PLAY (4).  
While zoomed, the picture may look coarse or distorted.  
Current magnification  
NOTES:  
Reverse slow motion playback is possible only with the DVD  
VIDEO discs.  
This function may not works for some Video CD or SVCD.  
Resume Function  
Zoomed-in area  
It is possible to memorize the position where you stop playback  
and resume playback from that position.  
Be sure to set “RESUME” to “ON”. (pg. 78)  
1 Memorize the resume point.  
Press STOP (8) during playback.  
Press rt w e to move the zoomed-in scene.  
“rESuM” appears on the front display panel.  
The unit enters Resume Stop mode and memorize the position  
where you stop playback as the resume point.  
To clear the resume point:  
• Press STOP (8) in stop mode.  
• Press POWER (1) to turn off the unit.  
• Eject the disc.  
• Set “RESUME” to “OFF”. (pg. 78)  
2 Resume playback.  
Press PLAY (4). The unit start playback from the resume  
point.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44  
EN  
OPERATIONS ON DVD DECK (cont.)  
Each time you press 3D-PHONIC, the setting changes as  
follows:  
OFF]ACTION]DRAMA]THEATER](Back to the  
beginning)  
OFF:  
ACTION:  
No effect  
Suitable for action movies and sports  
programs in which sounds dynamically  
move.  
DRAMA:  
Provides the natural and warm sound. You  
can enjoy movies in a relaxed mood.  
You can enjoy sound effects like in a major  
theater.  
THEATER:  
The selection menu disappears automatically if you do not  
change the selection for 5 seconds.  
NOTES:  
The 3D Phonic function works correctly only when playing  
back a DVD VIDEO disc recorded in the multi channel Digital  
format. With other sources, you cannot get any effect if you  
activate 3D Phonic function.  
When playing back a DVD VIDEO disc recorded with the  
Dolby Digital that does not contain the rear signal, you cannot  
get a correct 3D Phonic sound even if you activate 3D Phonic  
function.  
The 3D Phonic function does not affect the Digital bitstream  
signal from the DIGITAL AUDIO OUT connector.  
When 3D Phonic function is activated, Down Mix and D.  
Range Compression functions are disabled. (pg. 77)  
3D Phonic  
3D Phonic function allows you to get a simulated surround  
effect from your stereo system. You can enjoy the vertical  
surround sound with your 2-channel stereo system.  
1 Access the selection menu.  
Press 3D-PHONIC during playback.  
The current setting appears on the right bottom corner of the  
TV screen.  
2 Select the mode.  
Press 3D-PHONIC  
repeatedly.  
3D PHONIC DRAMA  
Selected mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
45  
4 Select the parameter.  
VFP function  
— Adjusting the picture quality  
Press rt repeatedly to select a parameter you want to  
adjust, then press ENTER.  
Adjust gradually and confirm picture appearance results are as  
preferred.  
GAMMA:  
Controls brightness of neutral tints while  
maintaining brightness of dark and bright  
portions.  
(–3 to +3)  
The VFP (Video Fine Processor) function enables you to adjust  
the picture character according to the type of programming,  
picture tone or personal preference.  
BRIGHTNESS: Controls screen brightness.  
(–8 to +8)  
NOTE:  
Before you start operation;  
CONTRAST:  
(–7 to +7)  
Controls screen contrast.  
The VFP setting screen disappears if no operations are done for  
more than about 10 seconds. If the setting screen disappears  
before you finish, start from step 1 again.  
SATURATION: Controls screen color depth.  
(–7 to +7)  
1 Access the VFP setting menu.  
TINT:  
Controls screen tint.  
(–7 to +7)  
Press DVD PICTURE during  
NORMAL  
playback.  
SHARPNESS: Controls screen sharpness.  
(–8 to +8)  
GAMMA  
0
0
0
0
0
The current setting appears on  
BRIGHTNESS  
CONTRAST  
SATURATION  
TINT  
the TV screen.  
VFP menu disappears and the following pop-up window  
appears on the TV screen.  
+
SHARPNESS  
3
2 Select the VFP mode.  
GAMMA  
0
Press w e repeatedly.  
GAMMA  
0
Each time you press w e, the VFP mode changes as follows:  
NORMAL]CINEMA]USER 1]USER 2](Back to the  
beginning)  
The selection menu disappears automatically if you do not  
change the selection for 10 seconds.  
NORMAL:  
CINEMA:  
Select this normally.  
Suitable for movie.  
5 Adjust the parameter.  
Press rt repeatedly to change the setting, then press  
ENTER.  
USER 1/USER 2: You can adjust parameters that affect  
picture appearance and store settings. Go  
to step 3.  
The current VFP settings appear again.  
6 Adjust the other parameters.  
Repeat steps 4 and 5 to adjust other parameters.  
NOTE:  
You cannot adjust the parameters of “NORMAL” and  
“CINEMA”.  
To return to the normal screen  
Press DVD PICTURE.  
To adjust picture appearance manually  
To activate your setting  
Press DVD PICTURE, then press w e repeatedly to select  
“USER 1” or “USER 2” that you have changed the  
parameters.  
3 Access USER menu.  
Press w e repeatedly to  
USER 1  
select “USER 1” or “USER 2”.  
GAMMA  
0
0
0
0
0
BRIGHTNESS  
CONTRAST  
SATURATION  
TINT  
+
SHARPNESS  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
46  
EN  
OPERATIONS ON DVD DECK (cont.)  
How to Access the on-screen bar  
Press ON SCREEN twice whenever a disc is loaded.  
Example: During DVD VIDEO playback  
Using the on-  
screen bar  
Example: During Video CD playback  
You can check disc information while the disc is loaded and you  
can use some functions using the on-screen bar. The on-screen  
bar allows you the various playback operations.  
Contents of the on-screen bar during playback  
DVD  
Video CD  
A Disc type  
B Current transfer rate (Megabits per second)  
C Current title (for DVD)  
D Current chapter number (for DVD) or track number  
(for other type of discs)  
E Time information (pg. 47)  
F Playback status  
: appears during playback.  
/
/
: appears during fast forward/reverse.  
: appears during playback in forward slow-  
motion/reverse slow-motion.  
: appears when paused.  
: appears when stopped.  
G Select this to change time information. (See 5 in the  
H Select this for Repeat Playback. (pg. 48)  
I Select this for time search function. (pg. 50)  
J Select this for chapter search function. (pg. 51)  
K Select this to change audio language or channel.  
(pg. 54, 55)  
L Select this to change subtitle language. (pg. 52)  
M Select this to change view angle. (pg. 53)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
47  
Basic operation on the on-screen bar  
Example: When selecting the Repeat mode of DVD  
During playback  
Change the time information  
You can change the time information in the on-screen bar on the  
TV screen and the front display panel of the unit.  
A Access the on-screen bar.  
During playback or while stopped  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
The currently selected item is highlighted.  
A Access the on-screen bar.  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
B Select menu item.  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
Press w e to move the highlight to  
, then press  
Each time you press ENTER, the time information changes as  
follows;  
ENTER. The pop-up window appears under the selected  
item.  
The current setting appears.  
Example: During DVD playback  
(Back to the beginning)  
TIME:  
Elapsed playing time of current chapter/track  
Remaining time of current chapter/track  
Elapsed time of title/disc  
REM:  
C Select the option.  
TOTAL:  
T. REM:  
Remaining time of title/disc  
Press rt to select the desired option, then press ENTER.  
Each time you press rt, the options change.  
To clear the on-screen bar  
Press ON SCREEN.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTE:  
NOTE:  
While a DVD is stopped, “– : – – : – –” appears in the time  
information display.  
See the corresponding pages for details on each function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
48  
EN  
OPERATIONS ON DVD DECK (cont.)  
C Select the repeat mode.  
Press rt repeatedly to select the Repeat mode, then  
press ENTER.  
The mode changes as follows:  
DVD VIDEO  
CHAPTER]TITLE]A-B]OFF](Back to the beginning)  
CHAPTER:  
TITLE:  
A-B:  
The current chapter is played  
back repeatedly.  
The current title is played back  
repeatedly.  
The desired part is played back  
repeatedly. (pg. 49)  
Each title and chapter is played  
back once.  
OFF:  
Video CD/SVCD/CD  
TRACK]ALL]A-B]OFF](Back to the beginning)  
The current track is played back  
repeatedly.  
TRACK:  
ALL:  
All tracks are played back  
repeatedly.  
The desired part is played back  
repeatedly. (pg. 49)  
A-B:  
Each track is played back once.  
OFF:  
“A-B” cannot be selected while stopped.  
To clear the on-screen bar  
Press ON SCREEN.  
To cancel Repeat Playback  
Repeat from step A, select “OFF” in step C, then press  
ENTER.  
Repeat Playback  
When using the REPEAT button:  
A Access the repeat mode.  
You can repeat playback as you like according to the type of  
disc.  
Press REPEAT during playback of the item you want to  
repeat.  
DVD VIDEO:  
Audio CD:  
during playback  
Repeat mode is displayed on the TV.  
during playback or in stop mode  
Video CD/SVCD: in stop mode or during playback with PBC  
deactivated  
B Select the repeat mode.  
When using the on-screen bar  
Press REPEAT repeatedly to select the desired repeat  
mode.  
To stop Repeat Playback, press STOP (8).  
To cancel Repeat Playback, press REPEAT repeatedly until  
“OFF” appears on the TV screen.  
The pop-up window disappears if no operation is done for  
about 5 seconds.  
A Access the on-screen bar.  
the TV screen.  
Press ON SCREEN twice. The on-screen bar appears on  
B Select menu item.  
NOTES:  
Repeat Playback is not possible with a Video CD and SVCD  
with PBC function.  
Press w e to move the highlight to  
ENTER.  
, then press  
Repeat Playback may not work properly depending on the  
type of disc being used.  
You cannot select A-B Repeat Playback by pressing REPEAT.  
The following pop-up window appears under the selected  
item.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
49  
A-B Repeat Playback  
You can repeat the desired part.  
A Access the on-screen bar.  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
C Select the repeat mode.  
Press rt repeatedly to select “A-B”.  
D Select the start point.  
Press ENTER at the beginning of the part you want to  
repeat (point A).  
The following display appears in the on-screen bar.  
E Select the end point  
Press ENTER at the end of the part you want to repeat  
(point B).  
A-B Repeat Playback starts. The selected part of the disc  
(between point A and B) is played repeatedly.  
To cancel A-B Repeat Playback  
Repeat from step A, select “OFF” in step C, then press  
ENTER.  
You can also cancel Repeat Playback by pressing SKIP (2)  
or SKIP (6).  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
A-B Repeat Playback may not work properly depending on the  
type of disc being used.  
The subtitles recorded around A-B point may not appear.  
The end of the item will be set as “B” point if the end of the  
item reached before you set the “B” point.  
When playing back a DVD, A-B Repeat Playback is possible  
only within the same title.  
“A-B” cannot be selected while stopped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
50  
EN  
OPERATIONS ON DVD DECK (cont.)  
Time Search  
You can play back a disc from the desired point by specifying  
the elapsed time from the beginning of the current title (for DVD  
VIDEO) or the disc (for Audio CD/Video CD) using the Time  
Search.  
When a PBC-compatible Video CD is played back, be sure to  
inactivate PBC function before you perform Time search by  
pressing the number keys instead of the PLAY (4) button when  
you start playback.  
A Access the on-screen bar.  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
C Select the time.  
Press the number keys (0-9) to enter the time, then press  
ENTER.  
Example:  
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)  
elapsed  
TIME _ : _ _ : _ _  
TIME 2 : 3 _ : _ _  
TIME 2 : 3 4 : 0 _  
TIME 2 : _ _ : _ _  
Press 2  
Press 3  
TIME 2 : 3 4 : _ _  
Press 0  
Press 4  
Press 8  
TIME 2 :3 4 :0 8  
If you have specified a wrong selection,  
Press w repeatedly until the wrong number is erased,  
then press number keys to enter the correct numbers.  
The unit starts playback from the specified time.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
When “X” is displayed on the TV screen in step C, you have  
selected a point that excesses the recording time of the disc.  
Some DVD VIDEO discs do not contain time information, and  
it is no possible to use the Time Search function. In such a  
case, “X” is displayed on the TV screen as well.  
Time Search does not work while you play back the Video CD  
or SVCD with the PBC Function.  
Reactivate the Playback Control (PBC) Function  
You can reactivate the PBC function when you play back a PBC-  
compatible Video CD disc without PBC function.  
Press TOP MENU during playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
51  
Chapter Search  
You can start playback the desired chapter using the on-screen  
bar.  
A Access the on-screen bar.  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
C Select the chapter.  
Press the number keys (0-9) to enter the desired chapter  
number, then press ENTER.  
The unit starts playback from the selected chapter.  
Examples:  
To select track 5, press the number key “5”.  
To select track 15, press the number key “1” and “5”.  
To select track 25, press number key “2” and “5”.  
It is not possible to use the number key “+10” and “–10”.  
If you have specified a wrong selection  
Enter the appropriate number keys again.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
When “X” is displayed on the TV screen in step C, the  
chapter you have selected is not contained in the disc, or  
chapter search does not work on the disc.  
Chapter Search starts automatically when you select the  
desired chapter in step C depending on the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
52  
EN  
OPERATIONS ON DVD DECK (cont.)  
C Select the subtitle language.  
Press rt repeatedly to select the desired subtitle  
language, then press ENTER.  
Each time you press the button, the subtitle language changes.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
It is impossible to select “OFF” when using the on-screen bar.  
To select “OFF”, press ON SCREEN to clear the on-screen bar,  
then press SUB TITLE repeatedly until “OFF” is selected.  
For DVD VIDEO  
Some subtitle languages are abbreviated in the pop-up  
window. See “Language Code List” (pg. 21).  
For SVCD  
SVCD can contain up to four subtitles. Pressing SUB TITLE  
changes the subtitles regardless of whether the subtitles are  
recorded or not. (Subtitles will not change if no subtitle is  
recorded.)  
When “X” appears on the TV screen in step C, subtitle  
language is not recorded.  
When using the SUB TITLE button:  
A Access the menu.  
Press SUB TITLE.  
The following pop-up window appears on the TV screen.  
Example (DVD):“ENGLISH” is selected out of 3 subtitle  
languages recorded.  
Subtitle Selection  
B Select the subtitle language.  
Press rt repeatedly to select the desired subtitle  
language. To select “OFF”, press SUB TITLE repeatedly  
until “OFF” is selected.  
You can select subtitle language.  
During playback  
Each time you press the button, the subtitle language changes.  
The pop-up window disappears if no operation is done for  
about 5 seconds.  
When using the on-screen bar  
A Access the on-screen bar.  
the TV screen.  
NOTE:  
is not recorded.  
When “X” appears on the TV screen in step B, subtitle language  
Press ON SCREEN twice. The on-screen bar appears on  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
Example (DVD):“ENGLISH” is selected out of 3 subtitle  
languages recorded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EN  
53  
When using the ANGLE button:  
Angle Selection  
A Access the menu.  
Press ANGLE.  
You can enjoy a variety of scene angles if the DVD VIDEO disc  
contains “multi-angle” parts, where multiple cameras were used  
to shoot the same scene from different angles.  
The following pop-up window appears on the TV screen.  
Example:The first view angle is selected out of 3 view angles  
recorded.  
If the disc contains “multi-angle” parts, “  
” appears on the TV  
screen at the beginning of the “multi-angle” part when “ON  
SCREEN GUIDE” is set to “ON”.  
During playback  
When using the on-screen bar  
A Access the on-screen bar.  
the TV screen.  
B Select the view angle.  
Press ON SCREEN twice. The on-screen bar appears on  
Press rt or ANGLE repeatedly to select the desired  
view angle.  
B Select menu item.  
Each time you press the button, the angle of the scene  
changes.  
The pop-up window disappears if no operation is done for  
about 5 seconds.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
Example:  
item.  
1/3]2/3]3/3](Back to the beginning)  
Example: The first view angle is selected out of 3 view angles  
recorded.  
1/3  
1/3  
1
2
1/3  
3
C Select the view angle.  
Press rt repeatedly to select the desired view angle,  
then press ENTER.  
Each time you press the button, the angle of the scene  
changes.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTE:  
When “X” appears on the TV screen in step C, the current  
scene is not recorded from multiple angles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
54  
EN  
OPERATIONS ON DVD DECK (cont.)  
B Select menu item.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
Example:ENGLISH” is selected out of 4 audio languages  
recorded.  
C Select the audio language.  
Press rt repeatedly to select the desired audio  
language, then press ENTER.  
Each time you press the button, the audio language changes.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
Some audio languages are abbreviated in the pop-up window.  
See “Language Code List” (pg. 21)  
If “X” appears on the TV, the current scene does not contain  
plural audio languages.  
When using the A.MONITOR button:  
A Access the menu.  
Press A.MONITOR.  
The following pop-up window appears on the TV screen.  
Example: “ENGLISH” is selected out of 3 audio languages  
recorded.  
Audio Language Selection  
Some DVD discs contain the multiple audio.  
You can select the audio language of movies (DVD VIDEO).  
During playback  
B Select the audio language.  
When using the on-screen bar  
Press rt or A.MONITOR repeatedly to select the  
desired audio language.  
Each time you press the button, the audio language changes.  
The pop-up window disappears if no operation is done for  
about 5 seconds.  
A Access the on-screen bar.  
the TV screen.  
Press ON SCREEN twice. The on-screen bar appears on  
NOTE:  
Some audio languages are abbreviated in the pop-up window.  
See “Language Code List” (pg. 21).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
55  
When using the A.MONITOR button:  
Audio Channel Selection  
A Access the menu.  
The following pop-up window appears on the TV screen.  
Example:ST” (stereo) is selected out of 3 audio channels  
recorded.  
Press A.MONITOR.  
When you play certain karaoke (Video CD/SVCD), you can  
enjoy karaoke by selecting the audio channel to play.  
The sound of each audio channel depends on the contents of  
the disc.  
During playback  
When using the on-screen bar  
A Access the on-screen bar.  
Press ON SCREEN twice. The on-screen bar appears on  
the TV screen.  
B Select the audio channel.  
Press rt or A.MONITOR repeatedly to select the  
desired audio channel.  
B Select menu item.  
Each time you press the button, the audio channel changes.  
The pop-up window disappears if no operation is done for  
about 5 seconds.  
Press w e to move the highlight to  
ENTER.  
, then press  
The following pop-up window appears under the selected  
item.  
For Video CD  
ST]L]R](Back to the beginning)  
Example: “ST” (stereo) is selected.  
To listen to normal stereo playback.  
To listen to L (left) audio channel only.  
To listen to R (right) audio channel only.  
ST:  
L:  
R:  
For SVCD  
C Select the audio channel.  
ST 1]ST 2]L 1]R 1]L 2]R 2](Back to the beginning)  
Press rt repeatedly to select the desired audio channel,  
then press ENTER.  
To listen to normal stereo playback of ST 1 or  
ST 2 channel.  
ST 1/ST 2:  
Each time you press the button, the audio channel changes.  
To listen to the L (left) 1 or 2 audio channel.  
To listen to the R (right) 1 or 2 audio channel.  
L 1/L 2:  
To clear the on-screen bar  
Press ON SCREEN.  
R 1/R 2:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
56  
EN  
OPERATIONS ON DVD DECK (cont.)  
C Access the DVD Set Up menu.  
B Press w e to select “ OTHERS”.  
Parental Lock  
A Press SET UP.  
This function restricts playback of DVD VIDEO discs which  
contain violent (and other) scenes according to the level set by  
the user. For example, if a movie which includes violent scenes  
supports the parental lock feature, such scenes which you do not  
want to let children view can be cut or replaced with other  
scenes.  
D Access the “PARENTAL LOCK“ menu.  
Press rt repeatedly to  
move the highlight to  
“PARENTAL LOCK“, then  
press ENTER.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
The “PARENTAL LOCK“ sub-  
menu appears on the TV  
screen.  
It is possible to access the  
“PARENTAL LOCK“ menu  
only in the stop mode when a  
DVD disc is loaded on the  
unit.  
E Access the country code menu.  
PARENTAL LOCK  
Press ENTER, then press rt  
repeatedly to move the  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
US  
NONE  
highlight to “COUNTRY  
_
_
_
_
CODE“, then press ENTER.  
SELECT  
ENTER  
USE  
TO SELECT. USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
Press rt repeatedly to  
move the highlight to select  
the country code, then press  
ENTER.  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
US  
UG  
UM  
US  
UY  
UZ  
VA  
NONE  
_
_
_
_
VC  
See “Country/Area Code List  
for Parental Lock” (pg. 58).  
The highlight moves to “SET  
LEVEL”.  
SELECT  
ENTER  
USE  
TO SELECT. USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
G Select the Level.  
Press ENTER, then press rt  
repeatedly to move the  
highlight to select the level of  
restriction, then press ENTER.  
The highlight moves to  
“PASSWORD”.  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
US  
NONE  
NONE  
_
_
_
_
8
7
6
5
4
3
To set Parental Lock for the first time  
SELECT  
ENTER  
USE  
TO SELECT. USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
The smaller the value of level  
is, the more restrictive the  
Parental Lock level is.  
Select “NONE” to cancel this  
function.  
A Turn on the unit.  
Press POWER (1).  
B Select the DVD deck.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
57  
H Enter the password.  
E Enter your new password.  
Press the number keys to  
enter a four-digit number as  
your password, then press  
ENTER.  
Press the appropriate number keys to enter 4-digit  
password, then press ENTER.  
PARENTAL LOCK  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
US  
4
_
_
_
_
The password entered in the this step becomes the new  
password. If you do not change the password, enter the same  
password as in the step B.  
Even if you want to change only the country code and/or level,  
do not forget to enter the password after changing the country  
code and/or the level. Otherwise, the new country code and/  
or the level will not become effective.  
The highlight moves to “EXIT”.  
SELECT  
ENTER  
NEW PASSWORD  
TO EXIT, PRESS [SET UP].  
?
••• PRESS  
0
~
9
KEY  
I Return to the OTHERS menu screen.  
Press ENTER.  
The “ OTHERS” menu resumes.  
Press SET UP.  
To return to the normal screen  
NOTES:  
Press SET UP.  
When you enter the wrong password more than 3 times in  
step B on the left column, the highlight moves to “EXIT”  
automatically and rt does not work.  
NOTE:  
Remember your password, or make a note of it.  
If you forget your password, enter “8888” in step B.  
To change the settings  
To temporarily release the Parental  
Lock  
You can change the Parental lock settings later.  
When you set the parental level strictly, some discs may not be  
played back at all. When you insert such a disc and try to play  
back it, the following Parental Lock screen appears on the TV  
screen, asking you whether you want the Parental Lock to be  
temporarily released or not.  
A Access the Parental Lock screen.  
A Press SET UP.  
B Press w e to select “ OTHERS”.  
C Press rt repeatedly to move the highlight to  
“PARENTAL LOCK“, then press ENTER.  
The “PARENTAL LOCK“ sub-menu appears on the TV screen.  
You can only move the highlight to “PASSWORD” or to  
“EXIT” before you enter your password.  
A Access the password screen.  
A Place the disc in the disc  
PARENTAL LOCK  
tray.  
TEMPORARY RELEASE  
NOT RELEASE  
If the disc rated higher than the  
_
_
_
_
PASSWORD  
B Enter the password.  
keys to enter 4-digit  
password, then press ENTER.  
If you enter the wrong  
password, “WRONG!  
RETRY...” appears at the  
bottom of the TV screen.  
selected level, the following  
screen appears.  
Press the appropriate number  
B Press rt to move the  
SELECT  
ENTER  
PARENTAL LOCK  
PASSWORD? ••• PRESS  
0
~
9
KEY  
COUNTRY CODE  
SET LEVEL  
PASSWORD  
EXIT  
US  
4
highlight to  
_
_
_
_
“TEMPORARY RELEASE”,  
then press ENTER.  
If you select “NOT RELEASE”,  
you cannot play back that  
SELECT  
ENTER  
NEW PASSWORD  
TO EXIT, PRESS [SET UP].  
?
••• PRESS  
0
~
9
KEY  
B Enter the password.  
C Change the country code.  
Press the appropriate number keys to enter 4-digit  
password, then press ENTER.  
Press rt to select the country code, then press ENTER.  
See “Country/Area Code List for Parental Lock” (pg. 58).  
When you change the country code, you must select the level.  
If you enter the wrong password, “WRONG! RETRY...”  
appears on the TV screen. Enter the correct password.  
If you enter the correct password, the Parental lock is released  
and the unit starts playback.  
D Change the level.  
NOTES:  
Press rt to select the desired level, then press ENTER.  
When you enter the wrong password more than 3 times in  
step B above, the highlight moves to “NOT RELEASE”  
automatically and rt do not work. In such a case, press  
ENTER, then press OPEN/CLOSE (x) to remove the disc.  
If you forget your password, enter “8888” in step B.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
58  
EN  
OPERATIONS ON DVD DECK (cont.)  
Country/Area Code List for Parental Lock  
AD  
AE  
Andorra  
ES  
Spain  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
ET  
Ethiopia  
AF  
FI  
FJ  
FK  
Finland  
Fiji  
Falkland Islands (Malvinas)  
AG  
AI  
AL  
AM  
AN  
AO  
AQ  
AR  
AS  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Australia  
Aruba  
Azerbaijan  
Bosnia and Herzegovina  
Barbados  
Bangladesh  
Belgium  
FM  
FO  
FR  
Micronesia (Federated States of)  
Faroe Islands  
France  
France, Metropolitan  
Gabon  
United Kingdom  
Grenada  
Georgia  
French Guiana  
FX  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
Ghana  
Gibraltar  
Greenland  
Gambia  
Guinea  
Guadeloupe  
Equatorial Guinea  
Greece  
South Georgia and the South Sandwich Islands  
Guatemala  
Guam  
Guinea-Bissau  
Guyana  
Hong Kong  
Heard Island and McDonald Islands  
Honduras  
Croatia  
Haiti  
Hungary  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
GT  
GU  
GW  
GY  
HK  
HM  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
IQ  
IR  
IS  
IT  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
BF  
Burkina Faso  
Bulgaria  
BG  
BH  
BI  
Bahrain  
Burundi  
BJ  
Benin  
BM  
BN  
BO  
BR  
BS  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
BT  
Bhutan  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
Bouvet Island  
Botswana  
Belarus  
Indonesia  
Ireland  
Israel  
India  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
British Indian Ocean Territory  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
Iraq  
Switzerland  
Côte d’Ivoire  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Cuba  
Cape Verde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Iran (Islamic Republic of)  
Iceland  
Italy  
Jamaica  
Jordan  
Japan  
Kenya  
Kyrgyzstan  
Cambodia  
Kiribati  
Comoros  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
Saint Kitts and Nevis  
Korea, Democratic People’s Republic of  
Korea, Republic of  
Kuwait  
Cayman Islands  
Kazakhstan  
DK  
DM  
DO  
DZ  
EC  
Lao People’s Democratic Republic  
Lebanon  
Ecuador  
Estonia  
Egypt  
Western Sahara  
Eritrea  
EE  
EG  
EH  
ER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
59  
LC  
Saint Lucia  
Liechtenstein  
Sri Lanka  
SA  
SB  
SC  
SD  
SE  
Saudi Arabia  
Solomon Islands  
Seychelles  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
LY  
Liberia  
Sudan  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libyan Arab Jamahiriya  
Morocco  
Monaco  
Moldova, Republic of  
Madagascar  
Marshall Islands  
Mali  
Myanmar  
Mongolia  
Macau  
Northern Mariana Islands  
Martinique  
Mauritania  
Montserrat  
Malta  
Mauritius  
Maldives  
Malawi  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia  
Niger  
Norfolk Island  
Nigeria  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Slovakia  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Sao Tome and Principe  
El Salvador  
Syrian Arab Republic  
Swaziland  
Turks and Caicos Islands  
Chad  
SG  
SH  
SI  
SJ  
MA  
MC  
MD  
MG  
MH  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
MW  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SV  
SY  
SZ  
TC  
TD  
TF  
French Southern Territories  
Togo  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
Thailand  
Tajikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
TR  
TT  
Turkey  
Trinidad and Tobago  
Tuvalu  
TV  
TW  
TZ  
UA  
UG  
UM  
US  
UY  
UZ  
VA  
VC  
VE  
VG  
VI  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Taiwan, Province of China  
Tanzania, United Republic of  
Ukraine  
Nicaragua  
Netherlands  
Norway  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
Uganda  
Nepal  
United States Minor Outlying Islands  
United States  
Uruguay  
Nauru  
Niue  
New Zealand  
Oman  
Uzbekistan  
Vatican City State (Holy See)  
Saint Vincent and the Grenadines  
Venezuela  
Panama  
Peru  
French Polynesia  
Papua New Guinea  
Philippines  
Pakistan  
Poland  
Saint Pierre and Miquelon  
Pitcairn  
Puerto Rico  
Portugal  
Palau  
Paraguay  
PE  
PF  
Virgin Islands (British)  
Virgin Islands (U.S.)  
Viet Nam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
PG  
PH  
PK  
PL  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
Qatar  
Réunion  
Romania  
Russian Federation  
Rwanda  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
EN  
OPERATIONS ON DVD DECK (cont.)  
NOTES:  
Because of the disc characteristics or recording condition,  
some discs may not be played back or it takes time to start  
playback.  
About MP3 Disc  
This unit can playback CD discs recorded by the MP3 format  
(we refer to those discs as MP3 discs in this manual).  
Operations for MP3 discs are similar to those for Audio CD  
discs, though there are some restrictions and differences.  
The unit does not support “packet writing” discs.  
If there are any Tracks (files) which are stored on a disc  
directly and do not belong to any Group (directory), the unit  
recognized them as belonging to an independent Group.  
The unit plays back Groups/Tracks on an MP3 disc in the  
alphabetical order.  
For example, if there are three title Groups [one], [two] and  
[three] on a disc, the playback order is [one], [three] then  
[two]. Tracks in a Group are played back in the same way.  
Therefore, an MP3 disc on the market may be played back in  
the different order from the order printed on its sleeve.  
What is MP3?  
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG  
Audio is a compression specification that compresses the audio  
portion only. This image compression method is used in DVD or  
Video CD, etc. The audio data has been compressed into about  
1/10.  
On an MP3 disc, each material (song) is recorded on each Track  
(file), which usually belongs to a Group (folder).  
MP3 control display  
The MP3 control display appears on the TV screen and playback  
starts when an MP3 disc is loaded.  
Track A.mp3  
Group 1  
Track B.mp3  
Total group number on  
disc  
Current track  
number  
Total track number  
in current group  
Track C.mp3  
FILE  
Time – – : – –  
8
*
MP3 disc  
Group 2  
Group : 1 / 3  
Blue  
Red  
Green  
Track: 1 / 14 (Total 14)  
Cloudy  
Fair  
Fog  
Track D.mp3  
Track E.mp3  
Hail  
Indian summer  
Rain  
Track F.mp3  
Group 4  
Shower  
Snow  
Thunder  
Typhoon  
Wind  
Group 3  
Winter sky  
Current group  
number  
Current track  
Total track number  
on disc  
This unit can recognize up to 99 Groups and up to 150 Tracks  
per Group.  
If a disc includes more than the Tracks above limit, the unit stops  
detecting Tracks when the number of detected Tracks reaches  
the limit and ignores the subsequent Tracks. The unit also  
ignores any non-MP3 file in the disc.  
Current group  
* Elapsed playing time of current track  
Elapsed playing time is only shown during playback.  
NOTES for making a private MP3 disc using a CD-R/  
CD-RW disc:  
Select “ISO9660” as the disc format.  
Finalize the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
61  
Using the MP3 control display  
MP3 Playback  
A Turn on the unit.  
Press POWER (1).  
You can search and play back desired groups and tracks using  
the MP3 control display.  
B Select the DVD deck.  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
On the unit  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Select the mode.  
Be sure to set “FILE TYPE” to “AUDIO” before loading a  
disc. (pg. 76)  
D Load the disc.  
A Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
B Place the MP3 disc in the disc tray.  
For details, refer to “Placing a Disc” (pg. 7).  
C Press OPEN/CLOSE (x) on the DVD deck to close the  
disc tray.  
The MP3 control display appears on the TV screen when an  
MP3 disc is loaded. (pg. 60)  
E Select the group.  
Press rt to select the desired group, then press e.  
F Start playback.  
Press rt to select the desired track, then press ENTER or  
PLAY (4).  
You can skip a track across a group. Press SKIP (6) to skip  
to the first track of the next group when the last track of the  
current group is selected.  
G Pause playback.  
Press PAUSE (9).  
To resume normal playback, press PLAY (4).  
H Stop playback.  
Press STOP (8). Press OPEN/CLOSE (x) on the DVD  
deck to open the disc tray, then remove the disc.  
NOTES:  
PLAY (4), STOP (8), PAUSE (9), SKIP (2) and SKIP (6)  
buttons function the same as with Audio CD discs, however,  
REW (3) and FF (5) buttons do not function for MP3  
playback.  
Resume playback also does not function for MP3 playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
EN  
OPERATIONS ON DVD DECK (cont.)  
Repeat Playback  
You can repeat playback of the current group, track or all  
groups.  
While MP3 control display is on the TV:  
A Select the mode.  
Press REPEAT to select the desired repeat mode.  
Each time you press REPEAT, the mode changes as follows:  
TRACK]GROUP]ALL]OFF (No indication)](Back to the  
beginning)  
The current track is played back  
repeatedly.  
TRACK:  
All tracks of the current group are  
played back repeatedly.  
GROUP:  
All tracks are played back  
repeatedly.  
ALL:  
Each track is played back once.  
OFF (no indication):  
To stop Repeat Playback, press STOP (8).  
To cancel Repeat Playback, press REPEAT repeatedly until the  
repeat mode display disappears on the TV screen.  
You can also quit Repeat Playback in the following cases:  
• Press OPEN/CLOSE (x) to open the disc tray.  
• Turn off the unit.  
To return to the MP3 control display  
Press STOP (8).  
Group/track selection  
To start playback by specifying the group/track number  
A Press the number keys (0-10, +10) to enter the group  
number.  
B Press the number keys (0-10, +10) to enter the track  
number.  
The entered number appears in the track number indication  
and playback starts from the track you have specified.  
Example:  
To select 3:  
To select 14:  
To select 20:  
Press 3.  
Press +10, then 4.  
Press +10, then 10.  
Or press +10 twice, then 0.  
Press +10, +10, then 4.  
To select 24:  
To select 110: Press +10 ten times, then 10.  
To select 150: Press +10 fourteen times, then press 10 once.  
NOTE:  
You cannot select 150 even if you press +10 fifteen times, then  
press 0 once.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
63  
NOTES:  
We recommend to record a file at 640 x 480 resolution. (If a  
file has been recorded at a resolution of more than 640 x 480,  
it will take a longer time to be displayed.)  
This unit supports the JPEG files whose resolution is 32 to  
8192 pixel in width and 32 to 7680 pixel in height.  
This unit can only play back baseline JPEG files*. Progressive  
JPEG files* or lossless JPEG files* cannot be played back.  
* Baseline JPEG format: Used for digital cameras, web, etc.  
Progressive JPEG format: Used for web.  
Lossless JPEG format: An old type and rarely used now.  
Some files on a JPEG disc may be played back distortedly.  
Because of the disc characteristics or recording condition,  
some discs may not be played back or it takes time to start  
playback.  
About JPEG Disc  
This unit can playback CD discs recorded by the JPEG format  
(we refer to those discs as JPEG discs in this manual).  
Operations for JPEG discs are similar to those for Audio CD  
discs, though there are some restrictions and differences.  
What is JPEG?  
JPEG is the abbreviation of “Joint Photographic Expert Group”.  
JPEG is a still-picture data compression system.  
On a JPEG disc, each still picture is recorded as a file, which  
usually belongs to a Group (folder).  
The unit does not support “packet writing” discs.  
If there are any Files which are stored on a disc directly and do  
not belong to any Group (directory), the unit recognized them  
as belonging to an independent Group.  
The unit plays back Groups/Files on an JPEG disc in the  
alphabetical order.  
File A.jpg  
Group 1  
File B.jpg  
For example, if there are three title Groups [one], [two] and  
[three] on a disc, the playback order is [one], [three] then  
[two]. Files in a Group are played back in the same way.  
Therefore, an JPEG disc on the market may be played back in  
the different order from the order printed on its sleeve.  
File C.jpg  
JPEG disc  
Group 2  
File D.jpg  
File E.jpg  
JPEG control display  
File F.jpg  
Group 4  
The JPEG control display appears on the TV screen and playback  
starts when a JPEG disc is loaded.  
Total group number on  
disc  
Current file  
number  
Total file number in  
current group  
Group 3  
FILE  
8
This unit can recognize up to 99 Groups and up to 150 Files per  
Group.  
If a disc includes more than the Files above limit, the unit stops  
detecting Files when the number of detected Files reaches the  
limit and ignores the subsequent Files. The unit also ignores any  
non-JPEG file in the disc.  
Group : 1 / 3  
Sea  
Mountain  
Sky  
File: 1 / 14 (Total 41)  
Anemone fish  
Bonito  
Butterfly fish  
Dolphin  
Garden eel  
Manta ray  
Seal  
Swordfish  
Thunder  
Tuna  
Whale  
Whale shark  
NOTES for making a private JPEG disc using a CD-R/  
CD-RW disc:  
Select “ISO9660” as the disc format.  
Finalize the disc.  
Current group  
number  
Current file  
Total file number on  
disc  
Current group  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
64  
EN  
OPERATIONS ON DVD DECK (cont.)  
Using the JPEG control display  
JPEG Playback  
A Turn on the unit.  
Press POWER (1).  
You can search and play back desired groups and files using the  
JPEG control display.  
B Select the DVD deck.  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
On the unit  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Select the mode.  
Be sure to set “FILE TYPE” to “STILL PICTURE” before  
loading a disc. (pg. 76)  
D Load the disc.  
A Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
B Place the JPEG disc in the disc tray.  
For details, refer to “Placing a Disc” (pg. 7).  
C Press OPEN/CLOSE (x) on the DVD deck to close the  
disc tray.  
The JPEG control display appears on the TV screen when a  
JPEG disc is loaded. (pg. 63)  
E Select the group.  
Press rt to select the desired group, then press e.  
F Start playback.  
Press rt to select the desired file, then press ENTER or  
PLAY (4).  
You can skip a file across a group. Press SKIP (6) to skip to  
the first file of the next group when the last file of the current  
group is selected.  
The slide-show playback starts from the selected file.  
After selecting a file, press PLAY (4) to starts slide-show  
playback from the selected file, or press ENTER to show the  
selected file.  
The playback interval time of slide-show depends on the file  
size.  
G Pause playback.  
Press PAUSE (9).  
To resume normal playback, press PLAY (4).  
H Stop playback.  
deck to open the disc tray, then remove the disc.  
Press STOP (8). Press OPEN/CLOSE (x) on the DVD  
NOTES:  
PLAY (4), STOP (8), PAUSE (9), SKIP (2) and SKIP (6)  
buttons function the same as with Audio CD discs, however,  
REW (3) and FF (5) buttons do not function for JPEG  
playback.  
Resume playback also does not function for JPEG playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
65  
Repeat Playback  
You can repeat playback of the current group, file or all groups.  
While JPEG control display is on the TV:  
A Select the mode.  
Press REPEAT to select the desired repeat mode.  
Each time you press REPEAT, the mode changes as follows:  
GROUP]ALL]OFF (No indication)](Back to the beginning)  
All files of the current group are  
played back repeatedly.  
GROUP:  
All files are played back  
repeatedly.  
ALL:  
Each file is played back once.  
OFF (No indication):  
B Start playback.  
Press PLAY (4).  
To stop Repeat Playback, press STOP (8).  
To cancel Repeat Playback, press REPEAT repeatedly until the  
repeat mode display disappears on the TV screen.  
You can also quit Repeat Playback in the following cases:  
• Press OPEN/CLOSE (x) to open the disc tray.  
• Turn off the unit.  
To return to the JPEG control display  
Press STOP (8).  
Zooming  
Press ZOOM during playback.  
When you want to zoom the picture during slide-show  
playback, first press PAUSE (9), then press ZOOM.  
Each press of ZOOM changes the magnification in the  
following steps:  
ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] (Back to the  
beginning)  
To resume normal playback, press ENTER.  
Group/file selection  
To start slide-show playback by specifying the group/file  
number  
A Press the number keys (0-10, +10) to enter the group  
number.  
B Press the number keys (0-10, +10) to enter the file  
number.  
The slide-show playback starts from the file you have  
specified.  
To display only the selected file, then press ENTER. To start  
slide-show playback from that file, press ENTER again.  
Example:  
To select 3:  
To select 14:  
To select 20:  
Press 3.  
Press +10, then 4.  
Press +10, then 10.  
Or press +10 twice, then 0.  
Press +10, +10, then 4.  
To select 24:  
To select 110: Press +10 ten times, then 10.  
To select 150: Press +10 fourteen times, then press 10 once.  
NOTE:  
You cannot select 150 even if you press +10 fifteen times, then  
press 0 once.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
66  
EN  
EDITING (VCR DECK)  
You can use a camcorder as the source player and your  
unit as the recording deck.  
Edit From A  
Camcorder  
Slide the TV/VCR/DVD switch to the right.  
A Make connections.  
Connect the camcorder’s AUDIO OUT and VIDEO OUT  
connectors to the unit’s front panel AUDIO and VIDEO  
input connectors.  
When using a monaural camcorder, connect its AUDIO OUT  
connector to the AUDIO L input connector on your unit.  
When a Master Edit Control - equipped JVC camcorder is used, the  
camcorder is capable of controlling the unit. Refer to the camcorder’s  
instruction manual for operating procedure.  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Set the unit’s input mode.  
Press AUX (number key “0”) and/or CH to select “F-1”.  
D Set the edit mode.  
See “PICTURE CONTROL” on page 73.  
E Engage the Record Pause mode.  
Use PLAY (4), REW (3), or FF (5) to locate the  
point where you start recording, then press and hold  
PAUSE (9) and press REC (7) to engage the Record  
Pause mode.  
Recorder  
F Start the camcorder.  
Engage the Play mode of the camcorder.  
G Start the unit.  
To REMOTE  
PAUSE  
connector  
AUDIO input  
VIDEO  
input  
Press PLAY (4) to engage the Record mode of the unit.  
NOTES:  
Audio/video cable  
(not supplied)  
All necessary cables can be obtained from your dealer.  
When you select “EDIT” to dub tapes in step D, be sure to select  
“NORM” after you finish dubbing the tapes.  
Mini-plug cable  
(not provided)  
(JVC camcorder  
only)  
To Audio/VIDEO  
Output  
connectors  
Camcorder  
To Edit  
Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
67  
You can use your unit as the source player or as the  
recording deck.  
Edit To Or From  
Another Video  
Recorder  
Slide the TV/VCR/DVD switch to the right.  
A Make connections.  
A When using your unit as the source player ...  
... connect its AUDIO/VIDEO OUTPUT connectors to  
the audio/video input connectors on another recorder.  
B When using your unit as the recording deck ...  
... connect its AUDIO/VIDEO input connectors to the  
audio/video output connectors on another recorder.  
A
TV receiver  
Player  
Your unit  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
Audio/video  
cable  
Audio/video cable  
AV mode  
C Set the input mode of recording deck.  
With this video unit, press AUX (number key “0”) and/or  
CH to select “F-1”.  
When using another recorder as the recording deck, refer to its  
instruction manual.  
Another recorder  
D Set the edit mode.  
Recorder  
Recorder  
See “PICTURE CONTROL” on page 73.  
B
Your unit  
Engage the Record Pause mode of the  
recording deck.  
E
Locate the point where you start recording, then engage  
the Record Pause mode.  
Audio/video cable  
F Start the source player.  
Audio/video  
cable  
Engage the Play mode of the source player.  
AV mode  
G Start the recording deck.  
Engage the Record mode of the recording deck.  
Another recorder  
NOTES:  
All necessary cables can be obtained from your dealer.  
When you select “EDIT” to dub tapes in step D, be sure to select  
“NORM” after you finish dubbing the tapes.  
TV receiver  
Player  
When you use this unit as the source player for editing, be sure to set  
“SUPERIMPOSE” to “OFF” before starting. (pg. 73)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
68  
EN  
EDITING (VCR DECK) (cont.)  
You can dub selected scenes from the DVD disc to a cassette,  
starting and stopping wherever you wish.  
However, it is not possible to dub the copy-protected disc.  
In such case, “ERROR” appears on the front display panel.  
Dubbing  
(from DVD to VCR)  
A Load a cassette and place a disc.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
For the VCR deck  
Insert a cassette with the record safety tab intact.  
For the DVD deck  
A Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
B Place the disc in the disc tray.  
C Press OPEN/CLOSE (x) on the DVD deck to close the  
disc tray.  
B Prepare the VCR deck for dubbing.  
A Press VCR.  
B Press SP/EP to select recording speed.  
C Search for the point where you want to start dubbing  
by pressing PLAY (4), FF (5) or REW (3) then  
press STOP (8).  
C Prepare the DVD deck for dubbing.  
A Press DVD.  
B Search for the point where you want to start dubbing  
by pressing PLAY (4), FF (5), REW (3), 6 or  
2.  
C Press PAUSE (9) to pause playback a little before the  
start point.  
D Start dubbing.  
Press and hold REC (7), then press PLAY (4) on the  
Remote.  
“dub” lights on the front display panel.  
E End dubbing.  
Press STOP (8).  
Be sure to press STOP (8) while the VCR indicator lights up on  
the unit.  
NOTES:  
You can dub from DVD to VCR regardless of the scan mode  
setting. (pg. 78) However, the progressive signals will be  
converted to the interlace signals when dubbing.  
Set “ON SCREEN GUIDE” to “OFF” (pg. 78) if you do not  
want to record the on-screen display for DVD discs during  
dubbing.  
There may be a discrepancy of several seconds between  
where you intend editing to start, and where it actually starts.  
The superimposed indication during the operation or dubbing  
is not recorded.  
Set “PICTURE CONTROL” to “EDIT”. (pg. 73)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
69  
EDITING (DVD DECK)  
You can dub selected audio from the DVD or Audio CD disc to  
a MD etc.  
However, it is not possible to dub the copy-protected disc.  
Digital Audio  
Dubbing  
Example: Dubbing to a MD  
A Make connections.  
Connect the coaxial cable between the unit and the  
digital audio device.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
B Place a disc and load a MD.  
For the DVD deck  
A Press OPEN/CLOSE (x) on the DVD deck to open the  
disc tray.  
Recorder  
B Place the disc in the disc tray.  
C Press OPEN/CLOSE (x) on the DVD deck to close the  
disc tray.  
For the digital audio device  
Insert a MD.  
Digital audio device  
(MD deck etc.)  
C Prepare the DVD deck for dubbing.  
A Press DVD and select the audio to be dubbed.  
B Search for the point where you want to start dubbing  
by pressing PLAY (4), FF (5) or REW (3) then  
press STOP (8).  
Coaxial cable  
(not supplied)  
C Press REW (3) a little, then press PLAY (4) to start  
playback.  
Player  
D Press PAUSE (9) to pause playback a little before the  
start point.  
D Prepare the audio device for dubbing.  
Select the input mode.  
Rear of unit  
E Start dubbing.  
DIGITAL AUDIO OUT  
A Press PLAY (4) to start playback on the DVD deck.  
B Start recording on the audio device.  
F End dubbing.  
Stop recording on the audio device. Then press STOP (8)  
to stop playback on the DVD deck.  
NOTES:  
There may be a discrepancy of several seconds between  
where you intend editing to start, and where it actually starts.  
You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO  
OUTPUT” to “PCM ONLY”. (pg. 76)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
EN  
REMOTE  
On the Remote  
Keep pressing VCR down during steps A B.  
Remote Control  
Functions  
A Change the remote control code.  
Press the number key “1” for A, “2” for B, “3” for C or  
“4” for D.  
B Set the remote control code.  
Remote A/B/C/D Code Switching  
The Remote is capable of controlling four JVC video units  
independently. Each of units can respond to one of four codes  
(A, B, C or D). The remote control is preset to send A code  
signals because your unit is initially set to respond to A code  
signals. You can easily modify your unit to respond to B, C or D  
code signals.  
Press ENTER to set the code.  
NOTE:  
Once the batteries are removed, the remote control code is back  
to A.  
On the unit  
Before performing the following steps:  
Slide the TV/VCR/DVD switch to the right.  
C Turn off the unit.  
Press POWER (1).  
D Display the code.  
Press PLAY (4) on the unit for over 5 seconds while the  
unit is turned off. The code currently set appears on the  
front display panel.  
If the code displayed on the front display panel is different  
from the code set on the Remote, go to step E.  
E Change the unit’s code.  
Press STOP (8) on the Remote. The code currently set on  
the Remote will be applied to the unit.  
NOTE:  
Even if you unplug the end of the mains power cord from the  
mains, the code currently set remains.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
71  
Connecting To A Dolby Digital Decoder  
or An Amplifier With A Built-in DTS  
(DVD deck only)  
These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS.  
DIGITAL AUDIO OUT  
Back of unit  
Dolby Digital decoder or  
amplifier with a built-in DTS  
To DIGITAL AUDIO  
input  
Coaxial cable  
(not supplied)  
CAUTIONS:  
Make connections.  
This unit has a dynamic range of more than 80 dB with regards  
to its Hi-Fi audio capability. It is recommended that you check  
the maximum level if you are going to listen to the Hi-Fi audio  
signals through a stereo amplifier. A sudden surge in the input  
level to the speakers may damage them.  
Connect the coaxial cable between the unit and the  
Dolby Digital decoder or amplifier with a built-in DTS.  
NOTES:  
Some speakers and televisions are specially shielded to  
prevent television interference. If both are of the non-shielded  
type, do not place the speakers adjacent to the TV set as this  
can adversely affect the video playback picture.  
For Dolby digital sound, set “DIGITAL AUDIO OUTPUT” to  
“DOLBY DIGITAL/PCM”. (pg. 76)  
For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/  
PCM”. (pg. 76)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
EN  
SUBSIDIARY SETTINGS  
You can change various mode settings on the Function  
Set screen by following the procedure described below.  
For each mode setting, see pages 73 to 74.  
Mode Set  
A Turn on the unit.  
(VCR deck)  
Press POWER (1).  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
B Select the VCR deck.  
On the unit  
Press VCR/DVD repeatedly so that the VCR indicator  
lights up.  
On the Remote  
Press VCR so that the VCR indicator lights up.  
C Access the Main Menu screen.  
Press SET UP.  
D Access the Function Set screen.  
Press rt to move the  
highlight bar (arrow) to  
“FUNCTION SET”, then  
press ENTER or e.  
E Select the mode.  
Press rt to move the highlight bar (arrow) to the item  
you want to change.  
F Select the mode setting.  
Press ENTER or e.  
G Return to the normal screen.  
Press SET UP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
73  
* The default setting is bold in the table below.  
This feature helps you to adjust the playback picture quality according to your  
preference. Normally select “NORM”.  
8 PICTURE CONTROL  
NORM  
EDIT  
NORM  
EDIT  
SOFT  
:
Picture quality is adjusted automatically.  
SOFT  
SHARP  
:
Minimizes picture degradation during editing (recording and playback).  
:
Reduces image coarseness when viewing overplayed tapes containing a  
lot of noise.  
SHARP  
:
Clearer, sharper-edged picture when viewing images with lots of flat,  
same-colored surfaces such as cartoons.  
NOTES:  
When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until you  
select another mode.  
When you select “EDIT” to dub tapes, be sure to select “NORM” after you finish dubbing  
the tapes.  
When this function is set to “ON”, various operational indicators appear on the TV  
8 SUPERIMPOSE  
screen. Messages appear in the selected language. (pg. 18)  
ON  
OFF  
NOTES:  
When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to  
“OFF” before starting.  
During playback, the operation mode indicators may be disturbed depending on the type  
of tape being used.  
When this function is set to “ON”, the unit automatically switches to EP mode to  
allow complete recording if there is not enough tape to record the entire program  
while timer-recording in SP mode.  
8 AUTO SP]EP TIMER  
ON  
OFF  
For Example:  
Recording a program of 140 minutes in length onto a 120-minute tape  
Approximately 110 minutes  
SP mode  
Approximately 30 minutes  
EP mode  
Total 140 minutes  
Make sure you set this function to “ON”, before the timer-recording starts.  
NOTES:  
If you have programmed the unit to timer-record 2 or more programs, the second program  
and those thereafter may not fit on the tape if you set “AUTO SP]EP TIMER” to “ON”. In  
this case, make sure the mode is not engaged, then set the tape speed manually during  
timer programming.  
In order to ensure that the recording fits on the tape, this feature may leave a slight non-  
recorded section at the end of the tape.  
There may be some noise and sound disturbance at the point on the tape where the unit  
switches from SP to EP mode.  
The Auto SP]EP Timer feature is not available during ITR (Instant Timer Recording), and  
the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and  
T(ST)-120.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
74  
EN  
SUBSIDIARY SETTINGS (cont.)  
* The default setting is bold in the table below.  
When this function is set to “ON”, you can automatically correct vertical  
vibration in the picture when playing back unstable recordings made on  
another recorder.  
8 VIDEO STABILIZER  
ON  
OFF  
NOTES:  
When you finish viewing a tape, be sure to set this function to “OFF”.  
Regardless of the setting, this function has no effect during recording and during special  
effects playback.  
The on-screen display may jitter vertically when this function is set to “ON”.  
To watch recordings with close-caption, set this function to “OFF”.  
When this function is set to “ON”, the TV screen becomes all blue when  
receiving a channel not in use.  
8 BLUE BACK  
ON  
OFF  
NOTE:  
When you want to receive an unstable channel with poor signals, set this function to  
“OFF”.  
When this function is set to “ON”;  
If a SAP program is received, the SAP audio is recorded on both the normal and  
Hi-Fi tracks. The main audio is not recorded.  
8 2ND AUDIO RECORD  
ON  
OFF  
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi  
and normal tracks.  
When this function is set to “OFF”, the SAP audio cannot be recorded.  
NOTES:  
When the channel is changed on the unit;  
The “STEREO” indicator appears on the screen for about 5 seconds if the program is a  
stereo broadcast.  
The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP  
broadcast.  
Both indicators appear when a stereo program is accompanied by SAP sound.  
This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a  
Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing  
back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape  
containing two separate audio programs on the Hi-Fi tracks, you can choose  
either one by selecting either “HI-FI L” or “HI-FI R”.  
8 AUDIO MONITOR  
HI-FI  
HI-FI L  
HI-FI R  
NORM  
MIX  
HI-FI:  
Normally select this. Hi-Fi sound is played back.  
Sound on the left Hi-Fi channel is played back.  
Sound on the right Hi-Fi channel is played back.  
Sound on the normal track is played back.  
Both sounds on the Hi-Fi track and normal track are mixed  
and played back.  
HI-FI L:  
HI-FI R:  
NORM:  
MIX:  
NOTES:  
While playing back a monaural tape, sounds on the normal track will be heard  
regardless of this setting.  
You can also use the A.MONITOR button on the Remote to select the desired monitor  
sound. (pg. 30)  
When this function is set to “3H”, the unit is turned off automatically if no  
operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on  
the screen 3 minutes before the unit is turned off.  
8 AUTO POWER OFF  
3H  
OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
75  
The procedure shows how to set “RESUME” to “ON”  
on the DVD Set Up menu screen as an example.  
Mode Set  
A Turn on the unit.  
(DVD deck)  
Press POWER (1).  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
B Select the DVD deck.  
On the unit  
Press VCR/DVD repeatedly so that the DVD indicator  
lights up.  
On the Remote  
Press DVD so that the DVD indicator lights up.  
C Access the DVD Set Up menu screen.  
OTHERS  
A Press SET UP.  
B Press w e to select  
RESUME  
ON  
ON SCREEN GUIDE  
PARENTAL LOCK  
ON  
OTHERS”.  
Each time you press the  
button, the setup menus  
change as follows;  
SELECT  
ENTER  
USE  
TO SELECT, USE OK TO CONFIRM.  
TO EXIT, PRESS [SET UP].  
LANGUAGE] PICTURE] AUDIO  
OTHERS ](Back to the beginning)  
]
D Select the mode.  
Press rt to move the highlight to “RESUME”, then press  
ENTER.  
E Select the mode setting.  
Press rt to select “ON”, then press ENTER.  
F Return to the normal screen.  
Press SET UP.  
You can change various mode settings on the Mode Set  
screen by following the procedure described below.  
For each mode setting, see pages 76 to 78.  
MENU LANGUAGE (pg. 20)  
AUDIO LANGUAGE (pg. 20)  
LANGUAGE  
SUBTITLE (pg. 20)  
ON SCREEN LANGUAGE (pg. 19)  
MONITOR TYPE (pg. 16, 76)  
PICTURE SOURCE (pg. 76)  
PICTURE  
SCREEN SAVER (pg. 76)  
FILE TYPE (pg. 76)  
DIGITAL AUDIO OUTPUT (pg. 76)  
AUDIO  
DOWN MIX (pg. 77)  
D. RANGE COMPRESSION (pg. 77)  
RESUME (pg. 78)  
ON SCREEN GUIDE (pg. 78)  
PARENTAL LOCK (pg. 56)  
OTHERS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76  
EN  
SUBSIDIARY SETTINGS (cont.)  
Picture Settings  
* The default setting is bold in the table below.  
You can select the monitor type depending the TV used when you play back  
DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to  
“Monitor Set (DVD deck)” (pg. 16).  
8 MONITOR TYPE  
16:9  
4:3 LB  
4:3 PS  
You can obtain optimal picture quality by selecting whether the content on the  
disc is processed by field (video source) or by frame (film source).  
Normally set to “AUTO”.  
8 PICTURE SOURCE  
AUTO  
FILM  
AUTO:  
Used to play back a disc containing both video and film  
source materials. This unit recognizes the picture type (film or  
video source) of the current disc according to the disc  
information.  
VIDEO  
FILM:  
VIDEO:  
Suitable for playing back a film or progressive source disc.  
Suitable for playing back a video source disc with relatively a  
few moments.  
If the playback picture is unclear or noisy, or the oblique lines of the picture  
are rough, try to change to other modes.  
The TV screen may be burned out if a static picture is displayed for a long time.  
When this function is set to “ON”, the unit automatically activates the screen  
saver function if a static picture, such as an on-screen display or menu is  
displayed for over 5 minutes.  
8 SCREEN SAVER  
ON  
OFF  
You can select files to play back, when both MP3 files and JPEG files are  
recorded on a disc.  
8 FILE TYPE  
AUDIO  
STILL PICTURE  
AUDIO:  
Select this to play back MP3 files.  
STILL PICTURE: Select this to play back JPEG files.  
NOTE:  
Be sure to open and close the disc tray after changing the setting. The unit reads the disc  
again and the selected file type can be recognized.  
Audio Settings  
* The default setting is bold in the table below.  
Set to the appropriate mode according to the type of the device connected to  
DIGITAL AUDIO OUT connector on the rear of unit.  
It is not necessary to set this mode when you connect no device to DIGITAL  
AUDIO OUT connector.  
8 DIGITAL AUDIO OUTPUT  
PCM ONLY  
DOLBY DIGITAL/PCM  
STREAM/PCM  
PCM ONLY:  
Select this when you connect the unit’s DIGITAL AUDIO OUT  
connector to the linear PCM digital input connector of other audio  
device.  
DOLBY DIGITAL/PCM:  
Select this when you connect the unit’s DIGITAL AUDIO OUT  
connector to the digital input connector of a Dolby Digital decoder  
or an amplifier with a built-in Dolby Digital decoder.  
STREAM/PCM:  
Select this when you connect the unit’s DIGITAL AUDIO OUT  
connector to the digital input connector of an amplifier with a built-  
in DTS, Dolby Digital, or MPEG multichannel decoder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EN  
77  
Set to the appropriate mode according to your audio system when you play  
back a DVD VIDEO disc recorded with surround multichannel audio. This  
setting affects only the analog audio output signal from the AUDIO OUTPUT  
connectors (DVD) when playing back a DVD VIDEO disc recorded with  
surround multichannel audio.  
8 DOWN MIX  
DOLBY SURROUND  
STEREO  
DOLBY SURROUND:  
Select this when you enjoy multichannel surround audio by  
connecting the unit’s analog AUDIO OUTPUT connector  
(DVD) to a surround decoder or an internal amplifier.  
Select this when you enjoy conventional 2-channel stereo  
audio by connecting the unit’s analog AUDIO OUTPUT  
connectors (DVD) to a stereo amplifier/receiver or TV, or  
when you dub audio of a DVD VIDEO disc recorded with  
surround audio to your MD, cassette, etc.  
STEREO:  
NOTE:  
The “DOWN MIX” function does not work when the 3D Phonic function is activated.  
(pg. 44)  
You can compress the dynamic range (the difference between the loudest and  
quietest audio signals) of the sound when listening to the sound at a low  
volume or at night.  
This function is available with DVD VIDEO discs recorded with the Dolby  
Digital format. Set to the appropriate mode according to the number of  
channels recorded.  
8 D. RANGE COMPRESSION  
AUTO  
ON  
AUTO:  
Audio is played back with channels other than Dolby Digital  
channel 1 or 2 compressed.  
Audio is played back with all channel compressed.  
ON:  
NOTES:  
This function works only when playing back a disc recorded with Dolby Digital format.  
The setting is not effective for other discs.  
This function does not work when the 3D Phonic function is activated. (pg. 44)  
Output  
Playback discs  
STREAM/PCM  
DOLBY DIGITAL/PCM  
PCM ONLY  
DVD VIDEO with  
48 kHz, 16/20/24 bit linear  
PCM  
48 kHz, 16 bit linear PCM  
DVD VIDEO with DTS  
DTS bitstream  
44.1 kHz, 16 bit stereo linear PCM  
DVD VIDEO with Dolby  
Digital  
48 kHz, 16 bit stereo linear  
PCM  
Dolby Digital bitstream  
44.1 kHz, 16 bit stereo linear PCM  
44.1 kHz, 16 bit stereo linear PCM  
Linear PCM  
Audio CD/Video CD  
Audio CD with DTS  
MP3 disc  
DTS bitstream  
NOTES:  
The unit is not equipped with the DTS 5.1 channel decoding function.  
When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.  
Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.  
If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or  
set the level control of the amplifier connected to the analog outputs to minimum.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
78  
EN  
SUBSIDIARY SETTINGS (cont.)  
Others Settings  
* The default setting is bold in the table below.  
When this function is set to “ON”, you can use the resume function.  
8 RESUME  
(pg. 43)  
ON  
OFF  
ON:  
You can start playback from the resume point of the  
placed disc.  
OFF:  
You cannot use the resume function.  
NOTE:  
This function is not available for Audio CDs and MP3 discs.  
When this function is set to “ON”, the unit can display “on-screen  
guide” icons or characters which shows the conditions of the unit or  
disc.  
8 ON SCREEN GUIDE  
ON  
OFF  
Scan Mode Set  
Child Lock  
Turn on the TV and select the VCR channel (or AV  
mode).  
(DVD deck)  
Slide the TV/VCR/DVD switch to the right.  
Turn on the TV and select the VCR channel (or AV  
mode).  
Slide the TV/VCR/DVD switch to the right.  
You can disable the unit’s operation.  
A Set the Child Lock.  
This unit supports the progressive scan system (eg. 480p*)  
as well as the conventional interlaced scan system (eg.  
480i*).  
If your TV equipped with component video connectors  
supports the progressive video input, you can enjoy a  
high quality picture by setting the progressive scan mode  
to active.  
Press and hold POWER (1) on the Remote for more  
than 10 seconds while the unit is turned on. The unit  
turns off, and “CL“ appears on the front display panel.  
Refer also to the instruction manuals supplied with your TV.  
If your TV equipped with component video connectors does  
not support the progressive video input, do not change the  
scan mode to the “PROGRESSIVE”.  
To release the child lock, press and hold POWER (1) on the  
Remote until the unit turns on.  
* 480p and 480i indicate the number of scanning lines and  
scanning format of an image signal.  
• 480p indicates 480 scanning lines with progressive format.  
• 480i indicates 480 scanning lines with interlaced format.  
NOTES:  
When the child lock function is in use, keep the Remote out of  
the children’s reach.  
Timer recording programs will be performed even if the child  
lock function activated.  
A Switch the mode.  
During playback or while stopped, press and hold  
PROGRESSIVE SCAN on the unit or DVD on the Remote  
for more than 3 seconds, to change the scan mode  
between Progressive and Interlace mode.  
When the Progressive scan mode is selected, the Progressive  
mode indicator ( ) lights up on the front display panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
79  
TROUBLESHOOTING  
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are  
often easily corrected, and this can save you the trouble of sending your unit off for repair.  
POWER  
SYMPTOM  
1. No power is supplied to the unit.  
POSSIBLE CAUSE  
The AC power cord is disconnected.  
The batteries are weak.  
CORRECTIVE ACTION  
Connect the AC power cord.  
2. The Remote won’t function.  
Replace the dead batteries with new ones.  
TAPE TRANSPORT (VCR deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. During recording, the tape does not  
run. The counter display blinks on the  
front display panel.  
The unit is in the Record Pause mode.  
Press PLAY (4) to resume recording.  
2. The tape will not rewind or fast-  
forward.  
The tape is already fully rewound or  
fast-forwarded.  
Check the cassette.  
PLAYBACK (VCR deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. The VCR deck can not be operated.  
The VCR deck is not selected.  
On the unit  
Press VCR/DVD repeatedly so that the  
VCR indicator lights up.  
On the Remote  
Press VCR so that the VCR indicator lights  
up.  
2. The playback picture does not appear  
while the tape is running.  
If you are using the RF connection,  
If you are using the RF connection,  
— the TV receiver’s channel selector is — set the TV receiver to the VCR channel.  
not set to the VCR channel.  
— perform “Set the VCR channel.”  
— the unit’s VCR channel has not been (pg. 12).  
correctly set.  
If you are using the AV, S-VIDEO* or  
If you are using the AV or S-VIDEO*,  
Component Video* connection, the TV Component Video* connection, set the  
receiver is not set to the AV mode.  
* (DVD deck only)  
TV to its AV mode.  
* (DVD deck only)  
3. Noise appears during visual search.  
This is normal.  
4. Noise appears during normal  
playback.  
The automatic tracking mode is  
engaged.  
Try manual tracking. (pg. 30)  
5. The playback picture is blurred or  
interrupted while TV broadcasts are  
clear or “USE CLEANING CASSETTE”  
message appears on the screen.  
The video heads may be dirty.  
Use a dry cleaning cassette ECL-3F, or  
consult your JVC dealer.  
6. Breaks are noticeable in Hi-Fi  
soundtrack.  
The automatic tracking mode is  
engaged.  
Try manual tracking. (pg. 30)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
EN  
TROUBLESHOOTING (cont.)  
PLAYBACK (DVD deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. The button do not work.  
The operation is prohibited on the  
placed disc.  
2. The DVD deck can not be operated.  
The DVD deck is not selected.  
On the unit  
Press VCR/DVD repeatedly so that the  
DVD indicator lights up.  
On the Remote  
Press DVD so that the DVD indicator  
lights up.  
3. “X” appears on the TV screen.  
The operation is prohibited on the  
placed disc.  
4. “REGION CODE ERROR!” appears on The disc’s region number does not  
Use the discs whose region number  
includes “ALL” or “1”. (pg. 5)  
the TV screen.  
match that of the unit.  
5. The disc cannot be played back.  
The disc’s region number does not  
match that of the unit.  
Use the discs whose region number  
includes “ALL” or “1”. (pg. 5)  
This type of the disc cannot be played  
back.  
See “Unplayable Discs” (pg. 5).  
The disc is not placed properly.  
Remove the disc, then place the disc  
properly in the disc tray. (pg. 7,  
“Placing a Disc”)  
The Parental Lock is engaged, and the  
placed disc is rated higher than the set  
level.  
Release the Parental Lock temporarily  
(pg. 57), or change the set level  
(pg. 57).  
6. The language is not played back as  
you set.  
The disc does not contain the language  
you set.  
7. Changing audio/subtitle language is  
not possible.  
The disc does not contain the audio/  
subtitle in the multiple languages.  
With some discs, the language should be  
set on the top menu. (pg. 41)  
8. The subtitles do not appears on the TV The disc does not contain the subtitles.  
screen.  
The subtitle display is set to off.  
Set the subtitles display to on. (pg. 52)  
A-B Repeat Playback is in progress.  
(pg. 49)  
The subtitles recorded around A-B point  
may not appear.  
9. Angle cannot be changed.  
The scene is not recorded from the  
multiple angles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
81  
MP3 Playback (DVD deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. A disc cannot be played.  
No MP3 files are recorded to the disc.  
Replace the disc.  
MP3 files do not have the correct file  
extension in their file names.  
Add correct file extension (.mp3, .MP3 or  
any uppercase and lowercase combination  
such as “.Mp3”) to their file names.  
MP3 files are not recorded in a format  
compliant with ISO 9660 Level 1 or 2.  
Replace the disc. (Record MP3 files using a  
compliant application.)  
The different types of files are recorded to The disc which contains the different types  
the disc.  
of files may not be played because of its disc  
characteristics or recording conditions.  
2. Not MP3 files but JPEG files are played.  
The FILE TYPE setting is set to “STILL  
PICTURE”.  
When both MP3 files and JPEG files are  
recorded to a disc, set “FILE TYPE” to  
“AUDIO” to play MP3 files. (  
pg. 76)  
3. The MP3 control display appears on the  
TV screen, but no operation can be  
performed.  
No MP3 files or JPEG files are recorded to Replace the disc. (  
the disc, or the disc is an unplayable disc  
(such as CD-ROM).  
pg. 7)  
JPEG Playback (DVD deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. A disc cannot be played.  
No JPEG files are recorded to the disc.  
Replace the disc.  
JPEG files do not have the correct file  
extension in their file names.  
Add correct file extension (.jpg, .jpeg, .JPG,  
.JPEG or any uppercase and lowercase  
combination such as “.Jpg”) to their file  
names.  
JPEG files are not recorded in a format  
compliant with ISO 9660 Level 1 or 2.  
Replace the disc. (Record JPEG files using a  
compliant application.)  
2. Not JPEG files but MP3 files are played  
back.  
The FILE TYPE setting is set to “AUDIO”.  
When both MP3 files and JPEG files are  
recorded to a disc, set “FILE TYPE” to “STILL  
PICTURE” to play JPEG files. (  
pg. 76)  
RECORDING (VCR deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. Recording cannot be started.  
There is no cassette loaded, or the cassette Insert a cassette, or using adhesive tape,  
loaded has had its record safety tab  
removed.  
cover the hole where the tab was removed.  
2. TV broadcasts cannot be recorded.  
3. Tape-to-tape editing is not possible.  
“F-1” has been selected as the input  
mode.  
Set to the desired channel.  
The source (another video recorder,  
camcorder) has not been properly  
connected.  
Confirm that the source is properly  
connected.  
All necessary power switches have not  
been turned on.  
Confirm that all units’ power switches are  
turned on.  
The input mode is not correct.  
Set the input mode to “F-1”.  
4. Camcorder recording is not possible.  
The camcorder has not been properly  
connected.  
Confirm that the camcorder is properly  
connected.  
The input mode is not correct.  
Set the input mode to “F-1”.  
5. “” and “$” on the front display  
The end of the tape was reached during The program may not have been recorded  
panel won’t stop blinking.  
recording.  
in its entirety. Next time make sure you  
have enough time on the tape to record  
the entire program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82  
EN  
TROUBLESHOOTING (cont.)  
TIMER RECORDING (VCR deck)  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. Timer recording won’t work.  
The clock and/or the timer have been  
set incorrectly.  
Re-perform the clock and/or timer  
settings.  
The timer is not engaged.  
Press TIMER and confirm that “#” is  
displayed on the front display panel.  
2. Timer programming is not possible.  
Timer recording is in progress.  
Timer programming can’t be performed  
while a timer recording is in progress.  
Wait until it finishes.  
3. “#” on the front display panel won’t  
The timer is engaged but there’s no  
cassette loaded.  
Load a cassette with the record safety tab  
intact.  
stop blinking.  
The loaded cassette has had its record  
safety tab removed.  
Remove the cassette and cover the hole  
with adhesive tape, or insert a cassette  
with the record safety tab intact.  
4. “#”, “” and “$” on the front  
The end of the tape was reached during The program may not have been recorded  
display panel won’t stop blinking.  
timer recording.  
in its entirety. Next time make sure you  
have enough time on the tape to record  
the entire program.  
5. “#” blinks for 10 seconds and the  
TIMER has been pressed when there are Check the programmed data and re-  
Timer mode is disengaged.  
no programs in memory, or the timer  
record information has been  
programmed incorrectly.  
program as necessary, then press TIMER  
again.  
6. “” and “$” on the front display  
The end of the tape was reached during The program may not have been recorded  
panel won’t stop blinking.  
Instant Timer Recording.  
in its entirety. Next time make sure you  
have enough time on the tape to record  
the entire program.  
7. “N”, “” and “$” on the front display The Satellite Auto Recording mode is  
panel won’t stop blinking.  
Load a cassette with the record safety tab  
engaged but there is no cassette loaded. intact.  
The loaded cassette has had its record  
safety tab removed.  
Remove the cassette and cover the hole  
with adhesive tape, or insert a cassette  
with the record safety tab intact.  
The end of the tape was reached during The program may not have been recorded  
Satellite Auto Recording.  
in its entirety. Next time make sure you  
have enough time on the tape to record  
the entire program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
83  
OTHER PROBLEMS  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. The image of TV broadcast appears  
distorted on the TV screen.  
The unit leaves turned on and the DVD Turn off the unit, or press VCR to select  
deck is selected.  
the VCR deck, then press TV/VCR so that  
the VCR indicator disappears from the  
front display panel.  
2. Whistling or howling is heard from the The camcorder’s microphone is too  
Position the camcorder so its microphone  
is away from the TV.  
TV during camcorder recording.  
close to the TV.  
The TV’s volume is too high.  
Turn the TV’s volume down.  
3. When scanning channels, some of  
them are skipped over.  
Those channels have been designated  
to be skipped.  
If you need the skipped channels, restore  
them. (pg. 25)  
4. The channel cannot be changed.  
Recording is in progress.  
Press PAUSE (9) to pause the recording,  
change channels, then press PLAY (4) to  
resume recording.  
5. Channel settings that were made  
manually seem to have changed or  
disappeared.  
After the manual settings were made,  
Auto Channel Set was performed.  
Perform manual setting again.  
6. Even though Auto or Semiauto Clock  
Set has been performed, the clock is  
incorrect.  
The clock setting data received from the Select a different host channel during  
host channel is incorrect.  
“Semiauto Clock Set” (pg. 23), or  
perform “Manual Clock Set” (pg. 23).  
ATTENTION  
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the  
unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the  
cassette, operate the unit as usual.  
Tray Lock  
You can lock the disc tray to prohibit the unwanted disc ejection by children.  
To lock the disc tray.  
While the unit is turned off, press and hold 8, then press x on the unit. “LOCK” appears on the front display panel and the disc  
tray is locked.  
To unlock tray  
While the unit is turned off, press and hold 8, then press x on the unit. “UNLOCK” appears on the display panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
EN  
QUESTIONS AND ANSWERS  
PLAYBACK  
TIMER RECORDING  
Q. What happens if the end of the tape is reached  
during playback or search?  
A. The tape is automatically rewound to the  
beginning.  
Q. “” and “#” remain lit on the front display  
panel. Is there a problem?  
A. No. This is a normal condition for a timer  
recording in progress.  
Q. During search, slow, still and frame-by-frame  
playback, I can’t hear any audio. What’s the  
problem?  
Q. Can I program the timer while I’m watching a  
tape or a TV broadcast?  
A. You won’t see the picture as it is replaced by the  
on-screen menu, but the audio from the  
program or tape you’re viewing can be heard.  
A. This is normal.  
Q. Can the unit indefinitely remain in the still  
mode?  
A. No. It stops automatically after 5 minutes to  
protect the heads.  
Q. When returning from search to normal  
playback, the picture is disturbed. Should I be  
concerned about this?  
A. No, it is normal.  
Q. Noise bar appear during search. What’s the  
problem?  
A. This is normal.  
Q. Sometimes, during Index Search, the unit can’t  
find the program I want to see. Why not?  
A. There may be index codes too close together.  
RECORDING  
Q. When I pause and then resume a recording, the  
end of the recording before the pause is  
overlapped by the beginning of the  
continuation of recording. Why does this  
happen?  
A. This is normal. It reduces distortion at the pause  
and resume points.  
Q. Can the unit indefinitely remain in the Record-  
Pause mode?  
A. No. The unit goes to its Stop mode  
automatically after 5 minutes to protect the  
heads.  
Q. What happens if the tape runs out during  
recording?  
A. The unit stops recording, and “” and “$” on  
the front display panel won’t stop blinking.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
85  
SPECIFICATIONS  
GENERAL  
TUNER  
Power requirement : AC 110 - 220 Vd, 50 Hz/60 Hz  
Power consumption  
Tuning system  
Channel coverage  
VHF  
: Frequency synthesized tuner  
Power on  
Power off  
: 23 W  
: 5.2 W  
: Channels 2 – 13  
: Channels 14 – 69  
: 113 Channels  
: Channel 3 or 4 (switchable; preset  
to Channel 3 when shipped)  
75 ohms, unbalanced  
UHF  
Temperature  
Operating  
Storage  
CATV  
RF output  
: 5°C to 40°C (41°F to 104°F)  
: –20°C to 60°C (–4°F to140°F)  
Operating position : Horizontal only  
Dimensions (WxHxD)  
: 435 mm x 93 mm x 272 mm  
: 4.1 kg  
: VHS NTSC standard  
TIMER  
Clock reference  
Program capacity : 1-year programmable timer/  
8 programs  
Memory backup time  
Weight  
Format  
: Quartz  
Maximum recording time  
(SP)  
: 210 min. with ST-210 video  
cassette  
: 630 min. with ST-210 video  
cassette  
: Approx. 5 seconds  
(EP)  
ACCESSORIES  
Provided accessories : RF cable,  
Infrared remote control unit,  
“AA” battery x 2,  
VIDEO/AUDIO (VCR deck)  
Signal system : NTSC color signal and EIA  
monochrome signal, 525 lines/60  
fields  
Conversion Plug  
Recording system : DA4 (Double Azimuth) head helical  
scan system  
Specifications shown are for SP mode unless otherwise  
specified.  
Signal-to-noise ratio: 45 dB  
E.& O.E. Design and specifications subject to change without  
notice.  
Horizontal resolution  
: 230 lines  
Frequency range : 70 Hz to 10,000 Hz (Normal audio)  
20 Hz to 20,000 Hz (Hi-Fi audio)  
Input/Output  
: RCA connectors:  
IN x 1, OUT x 1  
VIDEO/AUDIO (DVD deck)  
Signal system  
: NTSC  
: DVD (12 cm, 8 cm)  
CD (12 cm, 8 cm)  
Applicable disc  
Audio characteristics  
DVD  
: 4 Hz – 22 KHz  
Frequency response  
CD  
: 4 Hz – 20 KHz  
: 90 dB  
S/N Ratio  
Harmonic distortion  
: 0.1 %  
Wow and flutter  
Dynamic range  
Output  
: Below Measurable Level  
: 90 dB  
Component-Y : (RCA) 1.0 Vp-p/75 ohm  
Component-P /P  
B
R
: (RCA) 0.7 Vp-p/75 ohm  
: (RCA) 2 Vrms, 1 Kohm  
Audio  
Digital Audio : (COAXIAL) 0.5 Vp-p/75 ohm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86  
EN  
LIST OF TERMS  
A
L
A-B Repeat Playback ............................................ 49  
Language ............................................................18  
Language Code List ..........................................21  
Menu/Audio/Subtitle Language Set  
(DVD deck only) ........................................20  
On-screen Language Set (DVD deck) .................19  
On-screen Language Set (VCR deck) ..................18  
Letter Box ............................................................17  
Locating the start point of the item or skip the item ....42  
About Discs  
JPEG .............................................................. 63  
MP3 .............................................................. 60  
Placing a Disc .................................................. 7  
Playable Discs .................................................. 5  
Region Number ................................................ 5  
Unplayable Discs .............................................. 5  
Angle Selection .................................................... 53  
Audio Channel Selection ....................................... 55  
Audio Language Selection ..................................... 54  
Auto Channel Set ................................................. 24  
M
Manual Channel Set ..............................................25  
Manual Clock Set .................................................23  
Manual Tracking ..................................................30  
Mode Set (DVD deck)  
C
Chapter Search .................................................... 51  
Check, cancel and change programs ....................... 36  
Child Lock .......................................................... 78  
Clock Set ............................................................ 22  
Component Video Connection ............................... 14  
Connecting To A Dolby Digital Decoder or  
AUDIO LANGUAGE .......................................20  
D. RANGE COMPRESSION ..............................77  
DIGITAL AUDIO OUT .....................................76  
DOWN MIX ...................................................77  
FILE TYPE .......................................................76  
MENU LANGUAGE .........................................20  
MONITOR TYPE ....................................... 17, 76  
ON SCREEN GUIDE ........................................78  
ON SCREEN LANGUAGE .................................19  
PICTURE SOURCE ..........................................76  
RESUME ........................................................78  
SCREEN SAVER ...............................................76  
SUBTITLE .......................................................20  
Mode Set (VCR deck)  
An Amplifier With A Built-in DTS ...................... 71  
D
Digital Audio Dubbing .......................................... 69  
Disc menu .......................................................... 41  
Dubbing (from DVD to VCR) ................................. 68  
E
EDITING (DVD DECK)  
2ND AUDIO RECORD ....................................74  
AUDIO MONITOR ..........................................74  
AUTO POWER OFF ........................................74  
AUTO SP]EP TIMER ......................................73  
BLUE BACK ....................................................74  
PICTURE CONTROL ........................................73  
SUPERIMPOSE ................................................73  
VIDEO STABILIZER .........................................74  
MP3 control display ..............................................60  
Digital Audio Dubbing ..................................... 69  
EDITING (VCR DECK)  
Dubbing (from DVD to VCR) ............................ 68  
Edit From A Camcorder .................................... 66  
Edit To Or From Another Video Recorder ........... 67  
Elapsed Recording Time Indication ......................... 33  
Express Timer Programming ................................... 34  
G
Group/file selection .............................................. 65  
Group/track selection ........................................... 62  
N
Next Function Memory .........................................29  
I
O
INDEX .................................................................. 8  
Index Search ........................................................ 28  
Instant ReView ..................................................... 28  
Instant Timer Recording (ITR) ................................. 32  
OPERATIONS ON DVD DECK ........................40 65  
OPERATIONS ON VCR DECK .........................26 39  
J
JPEG control display ............................................. 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
87  
P
T
Pan&Scan ........................................................... 17  
Parental Lock  
Tape Position Indicator ..........................................10  
Tape Remaining Time ...........................................33  
Time Search .........................................................50  
Timer Recording ............................................34 39  
Top menu ............................................................41  
Tuner Set .............................................................24  
Country/Area Code List .................................... 58  
To change the settings ..................................... 57  
To set Parental Lock for the first time .................. 56  
To temporarily release the Parental Lock ............ 57  
Playback (DVD deck) .................................... 40 59  
Playback (JPEG) ............................................ 64 65  
Playback (MP3) ............................................. 61 62  
Playback (VCR deck) ..................................... 26 30  
Playback Control (PBC) Function .......................41, 50  
Plug&Play Set ...................................................... 15  
V
Variable Speed Search .....................................27, 42  
VFP function ........................................................45  
W
When programs overlap each other .........................38  
R
Z
Record One Program While Watching Another ........ 32  
Recording .................................................... 31 33  
Recording Resume Function .................................. 31  
Region Number ..................................................... 5  
Remote Control Functions ..................................... 70  
Repeat Playback ................................. 29, 48, 62, 65  
Resume Function ................................................. 43  
Zooming ....................................................... 43, 65  
3D Phonic ...........................................................44  
S
Satellite Auto Recording ........................................ 39  
Scan Mode Set (DVD deck) ................................... 78  
Second Audio Recording ....................................... 33  
Semiauto Clock Set ............................................... 23  
Skip Search ......................................................... 28  
Slow Motion ...................................................27, 43  
Soundtrack Selection ............................................ 30  
Still Picture/Frame-By-Frame Playback ...............27, 43  
Subtitle Selection ................................................. 52  
S-VIDEO Connection ............................................ 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Printed in China  
0604CSH-SW-BJ  
UJ  
COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop P 640 TC IX User Manual
Insignia Computer Monitor NS DP8CH User Manual
Ironman Fitness Home Gym 350u User Manual
JVC Flat Panel Television 0306TNH II IM User Manual
JVC Home Theater System LVT1504 005B User Manual
JVC Printer 0199MNVUNSW User Manual
JVC Speaker KD AHD75BT User Manual
Kenmore Range 7907755 User Manual
Kenwood Car Stereo System DPX U5130 User Manual
Kodak Film Camera 5272TM User Manual