OPTION HDD KIT
SA-K51U
INSTRUCTIONS
R
For Customer Use:
VICTOR COMPANY OF JAPAN, LIMITED
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
This instruction book is made from
100% recycled paper.
Model No.
Serial No.
SA-K51U
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
© 2002 VICTOR COMPANY OF JAPAN, LIMITED
Printed in Japan
LLT0020-001A
LLT0020-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Thank you for purchasing this product.
(These instrustions are for SA-K51U)
Features
Before beginning to operate this unit, please read the instruction manual carefully in
order to make sure that the best possible performance is obtained.
Attaching the expansion hard disk SA-K51U to the VR-510U increases the memory capacity
to 160 GB and makes long-time recording possible.
Due to design modifications, data given in this
instruction book are subject to possible change
FOR USA AND CANADA
without prior notice.
CAUTION
Precautions
● Ensure that the power to the VR-510U is off and the plug is removed from the power
RISK OF ELECTRIC SHOCK
WARNING:
TO REDUCE THE RISK OF FIRE OR
DO NOT OPEN
socket before attaching the SA-K51U. Not doing so may result in a fire or electric shock.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
● Do not touch the edge of the metal frame, as there is the risk of injury.
● Users must not attach the SA-K51U themselves because there is the risk of a burn from
an electric shock. Request your nearest JVC Service Center to perform the work. There
will be a charge for the work.
INSIDE.REFER
SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-CUTION,
NE PAS EXPOSER L’APPAREIL A
L’HUMIDITE OU A LA PLUIE.
The lightning flash wish arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
● Any data recorded on the original hard disk will be lost when the SA-K51U is attached.
INFORMATION (FOR CANADA)
This Class B digital apparatus complies with
Canadian ICES-003.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
RENSEIGNEMENT (POUR CANADA)
Cet appareil numérique de la Class B est conforme
á la norme NMB-003 du Canada.
instructions
in
the
literature
accompanying the appliance.
Information for USA
This device complies with part 15 of the FCC Rules.
Changes or modifications not approved by JVC could
void the user’s authority to operate the equipment.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Fix the SA-K51U in place by inserting the screws (black) into the four screw holes of the
stand and tightening them while the connector part of the SA-K51U is positioned so that
it is faces the rear panel of the VR-510U.
How to Attach
First, set the ID of the hard disk drive to “SLAVE.” Refer to the instructions on how to set the
ID shown on the top (side with the model-name label affixed) of the hard disk drive.
* Keep the screws straight and steady when tightening them because the stand has
non-threaded screw holes.
1. Fix the SA-K51U in place by inserting the screws (silver) into the four screw holes of the
stand and tightening them.
Stand
Fix in place so as the
flap and the hard disk
drive’s connectors are
on opposite sides.
Connector part
4. Connect the hard disk power cable and flat cable to the connectors on the SA-K51U.
Hard disk power cable
SA-K51U
2. Open the cover of the VR-510U and remove the clamp from the power cable for the hard
disk.
Flat cable
Clamp
Hard disk power cable
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select 2.HDD MOUNT by turning the jog dial and then return the shuttle dial to the
How to Mount
SELECT position by turning it either clockwise or anticlockwise.
The following describes how to operate the front panel of the VR-510U to mount the SA-
K51U.
The jog operation switches from J.DIR ↑ ↓ to J.DIR – +.
[
F U N C T I O N -
F A C T O R Y S E T T I N G
. H D D MO U N T
1
]
J
. D I R –
+
1
2
3
4
5
6
7
8
9
.
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
[
-
-
-
-
]
. D I
. D I
. D I
. D I
. D I
. D I
. D I
P
P
P
P
P
P
P
P
SW -
SW -
SW -
SW -
SW -
SW -
SW -
SW -
0
1
2
3
4
5
6
7
1. Insert the plug into the plug socket and switch on the power switch of the VR-510U.
The MOUNT ERROR message is displayed on the monitor.
3
A L
-
-
1 0
-
-
0 2 S U N 1 8
:
0 3
:
3 8
-
-
-
-
-
-
-
-
%
* It takes 10 to 20 seconds for the message to be displayed
after the power has been switched on.
* When the VR-510U is not receiving video input signals,
INPUT SIG ERROR and MOUNT ERROR messages are
displayed on the monitor alternatively.
1 0 . D I
MO U N T E R R O R
5. Set to standard format (STD) or extended format (EXTN) by turning the jog dial.
Turning the jog dial switches between OFF ↔ STD ↔ EXTN
[
F U N C T I O N -
1
]
J
. D I R –
+
1
2
3
4
5
6
7
8
9
.
F A C T O R Y S E T T I N G
O F F
S T D
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
↔ OFF in order.
Selects whether the hard disk is formatted with standard
or extended mode.
When the disk is formatted, all existing data on the hard
disk will be erased.
. H D D MO U N T
[
-
-
-
-
]
. D I
. D I
. D I
. D I
. D I
. D I
. D I
P
P
P
P
P
P
P
P
SW -
SW -
SW -
SW -
SW -
SW -
SW -
SW -
0
1
2
3
4
5
6
7
2. Simultaneously press the MENU button and the 4 button while holding down the STOP
button.
STD: Normally, use this position. Up to 13,000 alarm/
sensor events can be recorded.
EXTN: Set to this position if you want to be able to record
more than 13,000 alarm/sensor events (up to about
100,000 events).
The MENU screen is displayed.
[ M E N U ]
F U N C T I O N -
F U N C T I O N -
J
. D I R
1 0 . D I
1
2
H O U R M E T E R
E M E R G E N C Y H I S T O R Y
O P E R A T I O N C H E C K MO D E
O P E
H D R
B O O T
S C S
V E R .
V E R .
V E R .
V E R .
x x
x x
x x
x x
x x
.
.
.
.
.
x x
x x
x x
x x
x x
* Extended formatting takes about 5 minutes to complete.
Recording time is shorter than with the standard format.
I
E X T . M V E R .
6. Press the ¢ to start mounting.
3. Make sure FUNCTION-1 is selected and then return the shuttle dial to the SELECT
During mounting MOUNT XX% is displayed on the monitor.
Numbers are displayed instead of XX to show the progress.
When mounting has finished the INPUT SIG ERROR and
MOUNT ERROR messages are displayed on the monitor
alternately. After approximately 10 to 20 seconds the
MOUNT ERROR message disappears and mounting is
complete.
3
-
-
1 0
-
-
0 2 S U N 1 8
:
0 5
:
2 1
position by turning it either clockwise or anticlockwise.
A L
-
-
-
-
-
-
-
-
%
The FUNCTION-1 screen is displayed.
[
F U N C T I O N -
F A C T O R Y S E T T I N G
. H D D MO U N T
1
]
J
. D I R
1
2
3
4
5
6
7
8
9
.
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
O F F
MO U N T
I N P U T
x x %
I G E R R O R
[
-
-
-
-
]
S
. D I
. D I
. D I
. D I
. D I
. D I
. D I
P
P
P
P
P
P
P
P
SW -
SW -
SW -
SW -
SW -
SW -
SW -
SW -
0
1
2
3
4
5
6
7
1 0 . D I
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Verify Mounting
Specifications
● Mass:
Approx. 750 g (including stand)
9 W or less
The following describes how to operate the front panel of the VR-510U to verify that the SA-
K51U is mounted.
● Power Consumption:
● Allowable operating temperature:
● Allowable storage temperature:
● Allowable operating humidity:
● Accessories:
5°C to 40°C
1. Press the MENU button.
–20°C to 60°C
The MENU screen is displayed.
[ M E N U ]
C L O C K S E T
J
. D I R
·
30% to 80% RH
O N S C R E E N /
H D R MO D E
E X T MO D E
F
. D I S P MO D E
Stand × 1
Screw (silver) × 4
Screw (black) × 4
A L A R M / S E N S O R MO D E
B U Z Z E R
P R O G R A M
H O R I D A Y S E T
S Y S T E M / S T
T
I M E R
L
I
2. Select SYSTEM/LIST by turning the jog dial and then return the shuttle dial to the SELECT
position by turning it either clockwise or anticlockwise.
The SYSTEM/LIST screen is displayed.Verify that 160 GB
is displayed for the UTILITY item.
[ S Y S T E M ]
J O G
1 6 0 G B ]
·
U T
I
L
I
T Y
[
[
L
I
S T
]
H O U R M E T E R
P OWE R L O S S
/
L
I
S T
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|