CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-LH60R
ATT
SOUND
U
SOURCE
D
F
R
VOL
VOL
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
GET0127-001A
[E/EX]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to use the M (MODE) button .............
2
2
OTHER MAIN FUNCTIONS ................ 25
Changing the general settings (PSM) ....... 25
Detaching the control panel ...................... 29
LOCATION OF THE BUTTONS ............
Control panel.............................................
Remote controller......................................
Preparing the remote controller ................
4
4
5
6
CD CHANGER OPERATIONS .............. 30
About MP3 discs ....................................... 30
Playing discs ............................................. 30
Selecting the playback modes .................. 34
BASIC OPERATIONS .......................
Turning on the power ................................
Setting the clock........................................
7
7
8
EXTERNAL COMPONENT OPERATIONS ... 35
Playing an external component................. 35
RADIO OPERATIONS ......................
9
9
DAB TUNER OPERATIONS ................ 36
Tuning in to an ensemble and one of the
Listening to the radio.................................
Storing stations in memory ....................... 10
Tuning in to a preset station ...................... 11
services .................................................. 36
Storing DAB services in memory .............. 37
Tuning in to a preset DAB service ............. 38
What you can do more with DAB .............. 39
RDS OPERATIONS ......................... 12
What you can do with RDS ....................... 12
Other convenient RDS functions and
TROUBLESHOOTING ...................... 40
MAINTENANCE ............................. 42
SPECIFICATIONS ........................... 43
adjustments ............................................ 16
TAPE OPERATIONS ........................ 19
Listening to a cassette .............................. 19
Finding the beginning of a tune................. 20
Other convenient tape functions ............... 21
Prohibiting cassette ejection ..................... 22
SOUND ADJUSTMENTS ................... 23
Selecting preset sound modes
(C-EQ: custom equalizer) ....................... 23
Adjusting the sound .................................. 24
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
BEFORE USE
*For safety....
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF THE BUTTONS
Control panel
Display window
s d
f
g
h
j
k
l
/z
x
c
v
b
n
1
2 3
4
5 6 7 8
9
p
q
w
e
r
t
y
u
i
o
;
a
1
(standby/on/attenuator) button
Display window
s Disc information indicators
TAG (ID3 Tag), (folder),
• Lights up only when playing an MP3 disc or a
CD Text on a JVC MP3-compatible CD changer.
d Tape-in indicator
f Main display
g Playback item indicators
(disc)
• Lights up only when connecting to a CD changer.
(folder)
• Lights up only when playing an MP3 disc on a
JVC MP3-compatible CD changer.
h Source/clock display
2 SEL (select) button
3 Control dial
4 Display window
5 4
(track/file)
/¢
buttons
6 5 (up) button
23 (tape direction) button
7 0 (eject) button
8 ∞ (down) button
9 Remote sensor
p
(control panel release) button
q T (TP/PTY: traffic programme/programme
type) button
w D (DISP: display) button
• Also functions as SSM buttons when pressed
together with M (MODE) button.
e M (MODE) button
• Also functions as SSM buttons when pressed
together with D (DISP) button.
r FM/AM (DAB) button
t TAPE (CD-CH: CD changer) button
y EQ (equalizer) button
u MO (monaural) button
i
j RND (random) indicator
• Lights up only when connecting to a CD changer.
k EQ (equalizer) indicator
l Sound mode (C-EQ: custom equalizer)
indicators
ROCK, CLASSIC, POPS, HIP HOP, JAZZ,
USER
/
(Dolby B) indicator
z Tuner reception indicators
MO (monaural), ST (stereo)
x LOUD (loudness) indicator
c RDS indicator
AF, REG, TP, PTY
v MP3 indicator
(Dolby B) button
o Number buttons
; RPT (repeat) button
a RND (random) button
• Functions only when connecting to a CD changer.
• Lights up only when playing an MP3 disc on a
JVC MP3-compatible CD changer.
b Volume (or audio) level indicator
Equalizer pattern indicator
n RPT (repeat) indicator
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3 • Selects the preset stations while listening to
the radio (or the DAB tuner).
Remote controller
Each time you press the button, the preset
station (or service) number increases, and
the selected station (or service) is tuned in.
• While playing an MP3 disc on an MP3-
compatible CD changer;
ATT
SOUND
– Skips to the previous disc if pressed
briefly.
– Skips to the previous folder if pressed and
held.
Note: While playing a CD on a CD changer, this
always skips to the previous disc.
U
SOURCE
R
F
D
4 Functions the same as the control dial on the
main unit.
Note: These buttons do not function for the
preferred setting mode adjustment.
VOL
VOL
5 Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.
1 • Turns on the unit if pressed when the unit is
turned off.
6 Selects the source.
Each time you press the button, the source
changes.
• Turns off the unit if pressed and held until
“SEE YOU” appears on the display.
• Drops the volume level in a moment if
pressed briefly.
7 • Searches for stations while listening to the
radio.
Press again to resume the volume.
• Selects services while listening to the DAB
tuner if pressed briefly.
2 • Selects the band while listening to the radio
(or the DAB tuner).
• Searches for ensembles while listening to
the DAB tuner if pressed for more than one
second.
• Functions as the fast-forward or rewind
buttons if pressed and held while listening to
a cassette.
Each time you press the button, the band
changes.
• Changes the tape direction while listening to
a cassette.
Each time you press the button, the tape
direction changes alternately.
• While playing an MP3 disc on an MP3-
compatible CD changer;
– Skips to the next disc if pressed briefly.
– Skips to the next folder if pressed and
held.
To release this operation, press button 2 to
resume playback.
• Functions as Multi Music Scan buttons if
pressed while listening to a cassette.
To release this operation, press button 2 to
resume playback.
• Fast-forwards or reverses the track/file if
pressed and held while listening to the CD
changer.
Note: While playing a CD on a CD changer, this
always skips to the next disc.
• Skips to the beginning of the next track/file
or goes back to the beginning of the current
(or previous) tracks/files if pressed briefly
while listening to the CD changer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Return the battery holder.
Preparing the remote
controller
Insert again the battery holder by pushing it
until you hear a clicking sound.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
(back side)
WARNING:
• Store the battery in a place where children
cannot reach.
Remote sensor
If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or start
a fire.
Installing the battery
When the controllable range or effectiveness of
the remote controller decreases, replace the
battery.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
2) Remove the battery holder.
• Do not poke the battery with tweezers or similar
tools.
Doing this may cause the battery to give off
heat, crack, or start a fire.
(back side)
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time. Otherwise, it may be damaged.
2. Place the battery.
Slide the battery into the holder with the +
side facing upwards so that the battery is
fixed in the holder.
KS-LH60R is equipped with the steering
wheel remote control function.
If your car is equipped with the steering wheel
remote controller, you can operate this
receiver using the controller.
• See the Installation/Connection Manual
(separate volume) for connection to utilize
this function.
Lithium coin
battery (product
number: CR2025)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
1
3
2
Turning on the power
3 Adjust the volume.
To increase the volume
1 Turn on the power.
To decrease the volume
Volume level appears.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2 Select the source.
Volume (or audio) level indicator
(see page 27)
4 Adjust the sound as you want. (See
To operate the tuner (FM or AM),
see pages 9 – 18.
pages 23 and 24.)
To play a tape,
see pages 19 – 22.
To operate the CD changer,
see pages 30 – 34.
To drop the volume in a moment
Press
briefly while listening to any
To operate the external component
(LINE IN), see page 35.
To operate the DAB tuner,
see pages 36 – 39.
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
for more than one
“SEE YOU” appears, then the unit turns off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
4 Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
You can also set the clock system to either
24 hours or 12 hours.
1
2
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 26.)
5 Finish the setting.
2 Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
Note:
To show the clock time on the display, see page 27.
1
2
To check other information during play, press
D (DISP).
3 Set the minute.
Each time you press the button, the other
information will be shown on the upper part of
the display. (See page 27 for details.)
1 Select “CLOCK M” (minute).
2 Adjust the minute.
• Pressing D (DISP) with the unit turned off will
show the clock time for about 5 seconds.
1
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
To stop searching before a station is received,
press the same button you have pressed for
searching.
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station manually:
Manual search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Searching a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
Note:
Selected band appears*.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Press and hold ¢
or 4
until “MANU” (manual) starts
flashing on the display.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
* When “CLOCK” is set to “ON” (see page 27),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Start searching a station.
To search stations of
higher frequencies
To search stations of
lower frequencies
CONTINUED ON THE NEXT PAGE
When a station is received, searching stops.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations in memory
3 Tune in to a station you want while
“MANU” (manual) is flashing.
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
To search stations of
higher frequencies
• Manual preset of both FM and AM stations
To search stations of
lower frequencies
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
• If you release your finger from the button,
the manual mode automatically turns off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM—MW/LW) until you
release the button.
1 Select the FM band (FM1 – 3) you
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
When an FM stereo broadcast is hard to
receive:
1 Press M (MODE) to enter the
functions mode while listening
to an FM stereo broadcast.
“MODE” flashes on the upper
part of the display.
2 Press and hold both buttons for
more than 2 seconds.
2 Press MO (monaural), while
“MODE” is still flashing on the
display, so that the MO
indicator lights up on the
display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
“- -SSM- -” appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
MO (monaural) indicator
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
4 Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Each time you press the
button, the band changes as
follows:
Tuning in to a preset station
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 10 and 11.
2 Tune in to a station (in this example,
of 92.5 MHz).
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
To search stations of
higher frequencies
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
To search stations of
lower frequencies
2 Select the number (1 – 6) for the
preset station you want.
3 Press and hold the number button
(in this example, 1) for more than
2 seconds.
Selected band/preset number
and “MEMO” (memory) appear
alternately for a while.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS OPERATIONS
What you can do with RDS
To use Network-Tracking Reception
You can select the different modes of network-
tracking reception to continue listening to the
same programme in its finest reception.
RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals. For example, the stations
send their station names, as well as information
about what type of programme they broadcast,
such as sports or music, etc.
Another advantage of RDS function is called
“Enhanced Other Networks.” By using the
Enhanced Other Networks data sent from a
station, you can tune in to a different station of a
different network broadcasting your favorite
programme or traffic announcement while
listening to another programme or to another
source such as tape.
When shipped from the factory, “AF” is selected.
• AF:
Network-Tracking Reception is
activated with Regionalization set to
“off.”
With this setting, the unit switches to
another station within the same
network when the receiving signals
from the current station become
weak. (In this mode, the programme
may differ from the one currently
received.)
The AF indicator lights up but the
REG indicator does not.
By receiving the RDS data, this unit can do the
following:
• Tracing the same programme automatically
(Network-Tracking Reception)
• Standby Reception of TA (Traffic
Announcement) or your favorite programme
• PTY (Programme Type) search
• Programme search
• AF REG: Network-Tracking Reception is
activated with Regionalization set to
“on.”
With this setting, the unit switches to
another station, within the same
network, broadcasting the same
programme when the receiving
signals from the current station
become weak.
• And some other functions
Tracing the same programme
automatically (Network-Tracking
Reception)
Both the AF indicator and the REG
indicator light up.
• OFF:
Network-Tracking Reception is
deactivated.
Neither the AF indicator nor the REG
indicator lights up.
When driving in an area where FM reception is
not good, the tuner built in this unit automatically
tunes in to another RDS station, broadcasting the
same programme with stronger signals. So, you
can continue to listen to the same programme in
its finest reception, no matter where you drive.
(See the illustration on page 18.)
AF indicator
REG indicator
Two types of the RDS data are used to make
Network-Tracking Reception work correctly
—PI (Programme Identification) and AF
(Alternative Frequency).
Without receiving these data correctly from the
RDS station you are listening to, Network-
Tracking Reception will not operate.
Note:
If a DAB tuner is connected and Alternative Reception
(for DAB services) is activated, Network-Tracking
Reception (“AF”) is also activated automatically. On
the other hand, Network-Tracking Reception cannot
be deactivated without deactivating Alternative
Reception. (See page 39.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TA Standby Reception
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 26.)
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
the current source (another FM station, tape, or
other connected components).
• TA Standby Reception will not work if you are
listening to an AM station.
Press T (TP/PTY) to activate TA Standby
Reception.
2 Select “AF-REG” (alternative
frequency/regionalization reception)
if not shown on the display.
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
3 Select the desired mode—“AF,”
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 17) and the
traffic announcement can be heard.
“AF REG,” or “OFF.”
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
4 Finish the setting.
signals. Press ¢
or 4
to search
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception,
press T (TP/PTY) again. The TP indicator goes
off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using PTY Standby Reception
4 Finish the setting.
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from the current source
(another FM station, tape, or other connected
components).
• PTY Standby Reception will not work if you are
listening to an AM station.
7 When the current source is FM, the PTY
indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
If a station starts broadcasting the selected
PTY programme, this unit automatically
tunes in to the station.
You can select your favorite programme type for
PTY Standby Reception.
When shipped from the factory, PTY Standby
Reception is turned off. (“OFF” is selected for
PTY Standby Reception.)
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated since the
station being received does not provide the
signals used for PTY Standby Reception.
To activate PTY Standby Reception, you
need to tune in to another station providing
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 26.)
these signals. Press ¢
or 4
to
search for such a station.
When a station providing these signals is
tuned in, the PTY indicator stops flashing
and remains lit. Now PTY Standby Reception
is activated.
2 Select “PTY STBY” (standby) if not
7 When the current source is other than FM,
the PTY indicator lights up.
shown on the display.
If a station starts broadcasting the selected
PTY programme, this unit automatically
changes the source and tunes in to the station.
To deactivate the PTY Standby Reception,
select “OFF” in step 3 on the left column. The
PTY indicator goes off.
3 Select one of the twenty-nine PTY
codes. (See page 18.)
Selected code name
appears on the display
and is stored into
memory.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching your favorite programme
2 Select one of the twenty-nine PTY
codes. (See page 18.)
You can search any one of the PTY codes.
In addition, you can store your 6 favorite
programme types in the number buttons.
When shipped from the factory, the following
6 programme types have been stored in the
number buttons (1 to 6).
Selected code name
appears on the display.
To store your favorite programme types, see
below.
To search your favorite programme type, see
page 16.
3 Press and hold the number button
for more than 2 seconds to store the
PTY code selected into the preset
number you want.
3
1
2
POP M
ROCK M
EASY M
6
4
5
CLASSICS
AFFAIRS
VARIED
To store your favorite programme types
Selected preset number and “MEMO”
(memory) appear alternately.
1 Press and hold T (TP/PTY) for more
than 2 seconds while listening to an
FM station.
4 Press and hold T (TP/PTY) for more
than 2 seconds to exit from this
mode.
The last selected PTY code appears.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• If there is a station broadcasting a programme
of the same PTY code as you selected, that
station is tuned in.
• If there is no station broadcasting a
programme of the same PTY code as you
selected, the station will not change.
To search your favorite programme type
1 Press and hold T (TP/PTY) for more
than 2 seconds while listening to an
FM station.
Note:
In some areas, the PTY search will not work correctly.
Other convenient RDS
The last selected PTY code appears.
functions and adjustments
2 To select one of your favorite
programme type
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS
station, something different will happen. If the
signals from that preset station are not sufficient
for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (Programme search)
or
To select any one of the twenty-nine
PTY codes
• The unit takes some time to tune in to another
station using programme search.
To activate programme search, follow the
procedure below.
• See also “Changing the general settings
(PSM)” on page 25.
Preset number appears only if you select
a PTY code using the number buttons.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
Ex.: When “ROCK M” is selected
2 Press ¢
or 4
to select
3 Press ¢
or 4
to start PTY
“P(Programme)-SEARCH.”
search for your favorite programme.
3 Turn the control dial clockwise to select “ON.”
Now programme search is activated.
4 Press SEL (select) to finish the setting.
To cancel programme search, repeat the same
procedure and select “OFF” in step 3 by turning
the control dial counterclockwise.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display mode while
listening to an FM station
You can change the initial indication on the
display to station name (PS NAME) or station
frequency (FREQ) while listening to an FM RDS
station.
Setting the TA volume level
You can preset the volume level for TA Standby
Reception. When a traffic programme is received,
the volume level automatically changes to the
preset level.
• See also “Changing the general settings
(PSM)” on page 25.
• See also “Changing the general settings
(PSM)” on page 25.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press ¢
(TA volume).
or 4
to select “TA VOL”
2 Press ¢
(tuner display).
or 4
to select “TU DISP”
3 Turn the control dial to set to the desired
volume.
You can set it from “VOL 00” to “VOL 50.”
4 Press SEL (select) to finish the setting.
3 Turn the control dial to set to the desired
indication (“PS NAME” or “FREQ”).
4 Press SEL (select) to finish the setting.
Note:
Automatic clock adjustment
By pressing D (DISP), you can change the display
while listening to an FM RDS station. Each time you
press the button, the following information appears on
the main display:
When shipped from the factory, the clock built in
this unit is set to be readjusted automatically
using the CT (Clock Time) data in the RDS
signal.
If you do not want to use automatic clock
adjustment, follow the procedure below.
• See also “Changing the general settings
(PSM)” on page 25.
Station name
(PS NAME)
Station frequency
(FREQ)
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
Programme type
(PTY)
2 Press ¢
or 4
to select “AUTO
ADJ” (adjustment).
3 Turn the control dial counterclockwise to select
“OFF.”
Now automatic clock adjustment is canceled.
4 Press SEL (select) to finish the setting.
• Then, the display goes back to the original
indication in several seconds.
• For more details, see “To set the clock display
—CLOCK” on page 27.
To reactivate clock adjustment, repeat the
same procedure and select “ON” in step 3 by
turning the control dial clockwise.
Note:
You must stay tuned to the same station for more than
2 minutes after setting “AUTO ADJ” to “ON.”
Otherwise, the clock time will not be adjusted. (This is
because the unit takes up to 2 minutes to capture the
CT data in the RDS signal.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY codes
NEWS:
AFFAIRS:
News
SOCIAL:
Programmes on social
activities
Topical programmes expanding
on current news or affairs
Programmes which impart
advice on a wide variety of topics
Sport events
RELIGION: Programmes dealing with any
aspect of belief or faith, or the
INFO:
nature of existence or ethics
SPORT:
PHONE IN: Programmes where people can
express their views either by
EDUCATE: Educational programmes
DRAMA: Radio plays
phone or in a public forum
CULTURE: Programmes on national or
regional culture
TRAVEL:
LEISURE:
JAZZ:
Programmes about travel
destinations, package tours,
and travel ideas and
opportunities
Programmes concerned with
recreational activities such as
gardening, cooking, fishing,
etc.
SCIENCE:
Programmes on natural science
and technology
VARIED:
Other programmes like comedies
or ceremonies
POP M:
Pop music
ROCK M:
EASY M:
LIGHT M:
Rock music
Easy-listening music
Light music
Jazz music
COUNTRY: Country music
NATION M: Current popular music from
another nation or region, in that
country’s language
OLDIES:
FOLK M:
CLASSICS: Classical music
OTHER M: Other music
WEATHER: Weather information
FINANCE: Reports on commerce, trading,
the Stock Market, etc.
Classic pop music
Folk music
CHILDREN: Entertainment programmes for
children
DOCUMENT: Programmes dealing with
factual matters, presented in an
investigative style
The same programme can be received on different frequencies.
Programme 1
broadcasting on
frequency A
Programme 1
broadcasting on
frequency E
Programme 1
broadcasting on
frequency B
Programme 1
broadcasting on
frequency C
Programme 1
broadcasting on
frequency D
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE OPERATIONS
To stop play and eject the cassette
Press 0.
Tape play stops, the control panel flips down. The
cassette automatically ejects from the cassette
compartment. The source changes to the
previously selected one.
Listening to a cassette
You can play back type I (normal) tapes.
1 Open the control panel.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing 0
while the unit is turned off.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE (CD-CH) turns on
the unit and starts tape play automatically.
To fast-forward and rewind a tape
Press and hold ¢
more than one second to
fast-forward the tape.
When the tape reaches its
end, the tape is reversed and
playback starts from the
beginning of the other side.
for
2 Insert a cassette into the cassette
compartment.
The unit turns on and
tape play starts
automatically.
Press and hold 4
for more than one
second to rewind the tape.
When the tape reaches its end, playback of the
same side starts.
3 Close the control panel by hand.
To stop fast-forward and rewind at any
position on the tape, press 23.
Tape play starts from that position on the tape.
Notes:
4 Select the tape direction.
Each time you press 23,
• When one side of the tape reaches its end during
play, the other side of the tape automatically starts
playing. (Auto Reverse)
• When the tape reaches its end while fast-
forwarding, the tape direction will be changed
automatically.
the tape direction changes
alternately between forward
(
(
) and reverse
).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back tapes recorded with the
Dolby B NR*
1 Press M (MODE) to enter the functions
mode while listening to a tape.
“MODE” flashes on the upper part of the
display.
Ex.: When you locate three tunes ahead
of the current tune
2 Press
(Dolby B), while “MODE” is still
Each time you press the buttons, the number
changes up to 9.
When the beginning of the specified tune is
located, playback starts automatically.
flashing on the display so that the
(Dolby B) indicator lights up.
“DOLBY B” also appears on the display for
several seconds.
Notes:
To cancel the Dolby B NR, repeat steps 1
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo
passages (very quiet parts) or non-recorded
portions between tunes.
and 2 again so that the
goes off.
(Dolby B) indicator
* Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming
between tunes.
– Tapes with tunes recorded at low recording
levels.
Finding the beginning of a
tune
Multi Music Scan (MMS) allows you to
– The Dolby NR setting does not match. For
example, if Dolby B NR is on and the tape was
recorded with no Dolby NR.
automatically start playback from the beginning
of a specified tune.You can specify up to 9 tunes
ahead of or before the current tune.
During playback
Specify the tune you want to locate (how
many tunes ahead of or before the
current tune).
Press ¢
to locate a
tune ahead of the current
tune on the cassette.
Press 4
to locate a
tune before the current
tune on the cassette.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient tape functions
3 Turn the control dial clockwise to
select “ON.”
Now Blank Skip is
activated.
Skipping the blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
When this function is turned on, the unit fast-
forwards (skipping blank portions of 15 seconds
or more), to the next tune and starts playback.
• See also “Changing the general settings
(PSM)” on page 25.
4 Finish the setting.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 26.)
To cancel Blank Skip, repeat the same
procedure and select “OFF” in step 3 by turning
the control dial counterclockwise.
2 Press ¢
or 4
“B.SKIP” (blank skip).
to select
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the current tune repeatedly
You can play the current tune repeatedly
(Repeat Play).
Prohibiting cassette ejection
You can prohibit cassette ejection and lock a
cassette in the cassette compartment.
1 Press M (MODE) to enter the
functions mode while playing a
tune you want to hear over again
on a cassette.
While pressing TAPE (CD-CH), press and
hold
for more than 2 seconds.
“MODE” flashes on the upper
part of the display.
2 Press RPT (repeat), while
“MODE” is still on the display, so
that “REPEAT” appears on the
display.
“NO EJECT” flashes on the display for about
5 seconds, and the cassette is locked and
cannot be ejected.
Lights up when Repeat Play is turned on.
To cancel the prohibition and unlock the
cassette
When the tune has been played, the tape is
automatically rewound to the beginning of that
tune and the same tune will be played again.
While pressing TAPE (CD-CH), press and hold
again for more than 2 seconds.
“EJECT OK” flashes on the display for about
5 seconds, and the cassette is unlocked.
To cancel Repeat Play, repeat steps 1 and 2
again so that the RPT indicator goes off.
Note:
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
Note:
If you press 0 while cassette ejection is prohibited,
the control panel flips down, but the cassette
continues to play and cannot be ejected.
– Tapes with tunes recorded at low recording levels.
– The Dolby NR setting does not match. For example,
if Dolby B NR is on and the tape was recorded with
no Dolby NR.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Selecting preset sound modes
Indication
For:
Preset values
BAS TRE LOUD
(C-EQ: custom equalizer)
USER
ROCK
(Flat sound)
00
00
OFF
ON
You can select a preset sound mode (C-EQ:
custom equalizer) suitable to the music genre.
Rock or
disco music
+03
+01
CLASSIC Classical
music
+01
–02
OFF
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
POPS
Light music
+04
+02
+01
00
OFF
ON
HIP HOP Funk or rap
music
1 Press M (MODE) to enter the
functions mode.
JAZZ
Jazz music
+02
+03
OFF
“MODE” flashes on the upper
part of the display.
Note:
You can adjust each sound mode to your preference.
Once you make an adjustment, it is automatically
stored for the currently selected sound mode. See
“Adjusting the sound” on page 24.
2 Press EQ (equalizer) while “MODE”
is still flashing on the display.
The last selected sound
mode is recalled and applied
to the current source.
Sound mode indicator flashes.
Ex.: If you have selected “USER” previously
3 Select the sound mode you want.
Each time you press the
button, the sound modes
change as follows:
USER
JAZZ
ROCK
CLASSIC
POPS
HIP HOP
Sound mode indicator flashes.
Ex.: When you select “ROCK”
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
2 Adjust the setting.
To increase the level or
turn on the loudness
You can adjust the sound characteristics to your
preference.
To decrease the level or
turn off the loudness
1 Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
BAS
TRE
FAD
(bass)
(treble)
(fader)
Equalization pattern changes
as you adjust the bass or treble.
VOL
LOUD
BAL
(volume)
(loudness)
(balance)
Ex. 1: When you adjust “TRE” (treble)
Indication
To do:
Range
BAS*1
TRE*1
FAD*2
BAL
Adjust the bass.
–06 (min.)
|
+06 (max.)
Adjust the treble.
–06 (min.)
|
+06 (max.)
Ex. 2: When you turn on the loudness
3 Repeat steps 1 and 2 to adjust the
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
other items.
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
page 23.
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
LOUD*1
Boost low and high
frequencies to
LOUD ON
produce a well-
balanced sound
at low volume level.
|
LOUD OFF
VOL*3
Adjust the volume. 00 (min.)
|
50 (max.)
1
*
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the
currently selected sound mode (C-EQ) including
“USER.”
If you are using a two-speaker system, set the fader
level to “00.”
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
2
3
*
*
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
Changing the general settings
(PSM)
3 Adjust the PSM item selected.
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 26.)
Ex.: When you select “AUDIO 2”
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the setting.
2 Select the PSM item you want to
adjust.
Ex.: When you select “LEVEL”
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferred Setting Mode (PSM) items
• For detailed operations of each PSM items, refer to the pages listed in the table.
Factory-preset See
Indications
Selectable values/items
settings
0 (0:00)
00 (0:00)
24H
page
CLOCK H
CLOCK M
24H/12H
Hour adjustment
0 – 23 (1 – 12)
00 – 59
8
Minute adjustment
24/12-hour time display
8
12H
OFF
24H
ON
8
AUTO ADJ Automatic clock setting
ON
17
27
17
CLOCK
TU DISP
AF-REG
Clock display
Tuner display
OFF
ON
ON
PS NAME
AF
FREQ
AF REG
PS NAME
Alternative frequency/
Regionalization reception
AF
12, 13
14
OFF*1
29 programme types
(see page 18)
PTY STBY PTY standby
OFF
OFF
TA VOL
Traffic announcement
volume
VOL 00 – VOL 50
VOL 20
OFF
17
16
39
39
27
P-SEARCH Programme search
OFF
AF OFF
ON
DAB AF*2
Alternative frequency
search
AF ON
AF ON
VOL 00
AUDIO 2
DAB VOL*2 DAB volume adjustment
VOL –12
AUDIO 1
VOL 12
LEVEL
DIMMER
TEL
Level display
AUDIO 2
OFF
ON
Dimmer mode
Telephone muting
AUTO
OFF
OFF
AUTO
27
MUTING 1
OFF
ON
27
28
28
MUTING 2
BEEP
Key-touch tone
Scroll mode
OFF
ON
SCROLL
ONCE
AUTO
ONCE
OFF
B.SKIP
Blank skip
OFF
ON
OFF
21
28
28
EXT IN*3
TAG DISP
External component
Tag display
CHANGER
TAG OFF
LINE IN
TAG ON
CHANGER
TAG ON
1
2
3
*
*
*
Displayed only when the “DAB AF” is set to “AF OFF.”
Displayed only when the DAB tuner is connected.
Displayed only when one of the following sources is selected—FM, AM, and TAPE.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the clock display—CLOCK
To select the level meter—LEVEL
You can set the clock to be shown on the display
when the unit is turned on.
You can select the level meter display according
to your preference.
When shipped from the factory, the clock is set to
be shown on the display.
When shipped from the factory, “AUDIO 2” is
selected.
• ON:
• OFF:
Clock display is turned on.
Clock display is turned off. When
“OFF” is selected, the other
information (see table below)
appears instead of the clock
display (except when “LINE IN” is
selected as the source).
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates “AUDIO 1” setting and
illumination display.
• OFF:
Erases the audio level indicator.
To select the dimmer mode—DIMMER
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
When CLOCK is set to OFF:
Source
Initial
Pressing D (DISP)
indication
Tuner
(FM/AM/
DAB)
Band
• AUTO:
• OFF:
• ON:
Activates Auto Dimmer.
Cancels Auto Dimmer.
Always dims the display.
Clock appears for about
5 seconds.
TAPE
or
“TAPE” or
disc number
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
CD-CH
In this case, set the dimmer mode to “ON” or “OFF.”
When CLOCK is set to ON:
Initial
Source
Pressing D (DISP)
indication
To select the telephone muting—TEL
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
Tuner
(FM/AM/
DAB)
Clock
Band appears for about
5 seconds.
TAPE
Clock
“TAPE” appears for
about 5 seconds.
CD-CH Clock
Disc number and track/
file number appear
• MUTING 1: Selects this if this setting can mute
the sounds while using the cellular
phone.
alternately each time
you press the button.
• MUTING 2: Selects this if this setting can mute
the sounds while using the cellular
phone.
• OFF:
Cancels the telephone muting.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn the tag display on or off
To turn on/off the key-touch tone—BEEP
—TAG DISP
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch
tone is activated.
This function takes effect only when JVC
MP3-compatible CD changer is connected.
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
• ON:
• OFF:
Activates the key-touch tone.
Deactivates the key-touch tone.
There are two versions—ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). Only ID3v1 can
be shown.
When shipped from the factory, “TAG ON” is
selected.
To select the scroll mode—SCROLL
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
When shipped from the factory, scroll mode is set
to “ONCE.”
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, folder name and file name
appear.
• ONCE:
• AUTO:
Scrolls only once.
Repeats the scroll (5-second
intervals in between).
Cancels scroll mode.
Note:
• OFF:
If you change the setting from
“TAG OFF” to “TAG ON” while
playing an MP3 file, the tag display
will be activated when the next file
starts playing.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing D (DISP) for more than one
second.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)
To select the external component to use
—EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the control panel
Detaching the control panel
1 Insert the right side of the control
panel into the groove on the panel
holder.
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1 Unlock the control panel.
2 Press the left side of the control
panel to fix it to the panel holder.
2 Pull the control panel out of the unit.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
3 Put the detached control panel into
the provided case.
Connectors
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATIONS
We recommend that you use the JVC MP3-
compatible CD changer with your unit.
About MP3 discs
MP3 “files (tracks)” can be recorded in
“folders”—in PC terminology.
During recording, the files and folders can be
arranged in a way similar to arranging files and
folders of computer data.
“Root” is similar to the root of a tree. Every file
and folder can be linked to and be accessed from
the root.
By using this CD changer, you can play back
your original CD-Rs (Recordable) and CD-RWs
(Rewritable) recorded either in audio CD format
or in MP3 format.
• You can also connect other CH-X series
CD changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3
discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD
changers with this unit.
Hierarchy
Level 1
ROOT
Level 2
Level 3
Level 4
Level 5
Before operating your CD changer:
• Refer also to the Instructions supplied with
your CD changer.
6
7
01
02
03
4
3
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display.
If this happens, remove the magazine and
set the discs correctly.
05
10
5
11
12
04
1
8
9
2
• If no magazine is loaded in the CD changer,
“NO MAG” appears on the display. If this
happens, insert the magazine in the CD
changer.
: Folders and their playback order
: MP3 files and their playback order
01
1
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection and make sure the cords are
connected firmly. Then, press the reset
button of the CD changer.
Playing discs
Select the CD changer (CD).
TAPE
CD*1
*1 If you have changed the “EXT IN” setting to
“LINE IN” (see page 28), you cannot select the CD
changer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
Selected disc number*2
Notes:
• When you press TAPE (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
• If you change the source, CD changer play also
stops. Next time you select the CD changer as the
source, CD changer play starts from where
playback has been stopped previously.
• When you start playing back a CD Text or an MP3
disc, disc information will automatically appear on
the display. (See the explanation that follows.)
To change the display information
While playing back an MP3 file or CD Text, you
can change the disc information shown on the
display.
Folder or album name*3
Each time you press D (DISP), the
display changes to show the
following:
For MP3 discs
• When “TAG DISP” is set to “TAG ON” (initial
setting: see page 28)
(folder) indicator
MP3 indicator
2
3
*
When “CLOCK” is set to “ON” (see page 27),
the current indication will soon change to the
clock time.
If some MP3 files are recorded without being
included in a folder, they are played back first
and “ROOT” appears as the folder name.
Album name / performer
(folder name*5)
(TAG lights up on the display)
*
• When the current disc is a CD:
Playback starts from the first track of the
current disc.
Track title (file name*5)
(TAG lights up on the display)
Selected disc number*4
Elapsed playing time and
Current file number
*5 If an MP3 file does not have ID3 tags, folder name
and file name appear. In this case, the TAG
indicator will not light up on the display.
Current track
Elapsed playing time number
4
*
When “CLOCK” is set to “ON” (see page 27),
the current indication will soon change to the
clock time.
CONTINUED ON THE NEXT PAGE
31
Download from Www.Somanuals.com. All Manuals Search And Download.
• When “TAG DISP” is set to “TAG OFF”
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
Folder name
(
(
lights up on the display)
File name
lights up on the display)
Elapsed playing time and
Current file number
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
For CD Text discs
Each time you press the button,
the display changes as follows:
To fast-forward or reverse the track/file
Press and hold ¢
,
during play, to fast-forward
the track/file.
Disc title / performer
Press and hold 4
during play, to reverse the
track/file.
,
Track title
lights up on the display)
(
Elapsed playing time and
Current track number
Note:
During this operation on an MP3 disc, you can only
hear intermittent sounds. (The elapsed playing time
also changes intermittently on the display.)
Notes:
To go to the next or previous tracks/files
• The display shows up to 8 characters at one
time and scrolls if there are more than 8
characters.
See also “To select the scroll mode—SCROLL”
on page 28.
Press ¢
briefly
during play, to skip ahead
to the beginning of the
next track/file.
Each time you press the
button consecutively, the
beginning of the next
tracks/files is located and
played back.
Some characters or symbols will not be shown
(and be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press D (DISP) while playing an
audio CD, “NO NAME” appears for the disc
title/performer and the track title.
Press 4
briefly during play, to skip back to
the beginning of the current track/file.
Each time you press the button consecutively,
the beginning of the previous tracks/files is
located and played back.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
This operation is only possible when
using JVC MP3-compatible CD changer
(CH-X1500).
How to go to the desired track/file quickly
• Ex. 1: To select track/file number 32 while
playing track/file number 6
To go to a track/file quickly
1 Press M (MODE) to enter the functions mode
while playing a disc.
(Three times)
(Twice)
“MODE” flashes on the upper
Track/file 6 \ 10 \ 20 \ 30 \ 31 \ 32
part of the display.
• Ex. 2 :To select track/file number 8 while
2 Press 5 (up) or ∞ (down) while still in the
functions mode.
playing track/file number 36
To skip 10 tracks/files*
forwards to the last track/file
(Three times)
(Twice)
Track/file 36 \ 30 \ 20 \ 10 \ 9 \ 8
To skip 10 tracks/files*
backwards to the first track/file
To skip to the next or previous folder
(only for MP3 discs)
* The first time you press 5 (up) or ∞ (down)
button, the track/file skips to the nearest
higher or lower track/file with a track/file
number of multiple ten (ex. 10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks/files (see “How to go to the
desired track/file quickly” on the right column).
• After the last track/file, the first track/file will
be selected, and vice versa.
Press 5 (up) while playing an
MP3 disc, to go to the next
folder.
Each time you press the button
consecutively, the next folder is
located, and the first file in the
folder starts playback.
Note:
Press ∞ (down) while playing an MP3 disc, to go
to the previous folder.
Each time you press the button consecutively,
the previous folder is located, and the first file in
the folder starts playback.
If the current playing disc is an MP3 disc, files are
skipped within the same folder.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back tracks/files repeatedly
(Track Repeat/Folder Repeat/Disc Repeat
Play)
Selecting the playback modes
To play back tracks/files at random
(Folder Random/Disc Random/Magazine
Random Play)
1 Press M (MODE) to enter the
functions mode during play.
“MODE” flashes on the upper part
of the display.
1 Press M (MODE) to enter the
functions mode during play.
“MODE” flashes on the upper part
of the display.
2 Press RPT (repeat), while “MODE”
is still flashing on the display.
Each time you press the button, the
repeat play mode changes as
follows:
2 Press RND (random), while
“MODE” is still flashing on the
display.
For MP3 discs:
Each time you press the button, the
random play mode changes as
follows:
TRK RPT
FLDR RPT
DISC RPT
Canceled
For MP3 discs:
For CDs:
FLDR RND
DISC RND
MAG RND
TRK RPT
DISC RPT
Canceled
Canceled
For CDs:
DISC RND
MAG RND
Canceled
(disc) and RPT indicators
Ex.: When you select “DISC RPT”
RND indicator
Ex.: When you select “MAG RND”
Note:
The MP3 indicator also lights up if the current playing
disc is an MP3 disc.
Note:
The MP3 indicator also lights up if the current playing
disc is an MP3 disc.
Active
indicator
Mode
Plays repeatedly
TRK RPT
RPT indicator The current (or
Active
Mode
Plays at random
lights up.
and RPT
indicators
light up.
specified) track/
file.
indicator
and RND All files of the
indicators current folder, then
light up.
FLDR RND*
FLDR RPT*
All files of the
current (or
specified) folder of
the current disc.
files of the next
folder and so on.
DISC RND
and RND All tracks/files of
indicators
light up.
DISC RPT
and RPT All tracks/files of
indicators light the current (or
the current (or
specified) disc.
up.
specified) disc.
MAG RND RND indicator All tracks/files of
lights up. the inserted discs.
* “FLDR RPT” is only applicable for MP3 discs.
* “FLDR RND” is only applicable for MP3 discs.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL COMPONENT OPERATIONS
Playing an external component
2 Turn on the connected component
and start playing the source.
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
3 Adjust the volume.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 28.
4 Adjust the sound characteristics as
you want. (See pages 23 and 24.)
1 Select the external component
(LINE IN).
TAPE
LINE IN*
• If “LINE IN”* does not appear on the display,
see page 28 and select the external input
(“LINE IN”).
* Displayed only when one of the following sources is
selected—FM, AM, and TAPE.
Note on One-Touch Operation:
When you press TAPE (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DAB TUNER OPERATIONS
We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 or KT-DB1000
with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with
your DAB tuner.
Tuning in to an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After
tuning in to an ensemble, you can select a
service you want to listen to.
Before you start....
Press FM/AM (DAB) briefly if tape, CD changer,
or external component is the current source.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD
quality sound without any annoying
interference and signal distortion.
Furthermore, it can carry text, pictures, and
data.
In contrast to FM broadcast, where each
programme is transmitted on its own
frequency, DAB combines several
programmes (called “services”) to form one
“ensemble.”
1 Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
DAB
FM/AM
2 Select the DAB band (DAB1, DAB2,
or DAB3).
In addition, each “service”—called “primary
service”—can also be divided into its
components (called “secondary service”).
Each time you press the
button, the DAB band
changes as follows:
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
DAB1
(D1)
DAB2
(D2)
DAB3
(D3)
Note:
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
inconveniently. This change in the volume level results
from unequal audio injection levels at broadcaster
site, but not from the malfunction of this unit.
To prevent this inconvenience, you can adjust the DAB
volume level. (See “To adjust the DAB volume level”
on page 39.)
This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
in to an ensemble.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune in to a particular ensemble
without searching
3 Start searching for an ensemble.
To search for
Before you start....
Press FM/AM (DAB) briefly if tape, CD changer,
or external component is the current source.
ensembles of higher
frequency
1 Press and hold FM/AM (DAB) to select DAB
tuner as the source.
2 Press FM/AM (DAB) repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
To search for
ensembles of lower
frequency
When an ensemble is received, searching
stops.
3 Press and hold ¢
or 4
for more
than one second. “MANU” (manual) appears
on the display.
4 Press ¢
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
or 4
repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
5 Press 5 (up) or ∞ (down) to select a service
(either primary or secondary) you want to
listen to.
4 Select a service (either primary or
secondary) you want to listen to.
To select the next service
(If a primary service has
some secondary services,
they are selected before
the next primary service is
selected.)
To restore the FM/AM tuner
Press and hold FM/AM (DAB) again.
Storing DAB services in
memory
To select the previous service (either
primary or secondary)
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press D (DISP).
Before you start....
Press FM/AM (DAB) briefly if tape, CD changer,
or external component is the current source.
1 Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
Each time you press the button,
the following information appears
for a while in the main display.
DAB
FM/AM
Service name
2 Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Ensemble name
Channel number
Frequency
Each time you press the
button, the DAB band
changes as follows:
DAB1
(D1)
DAB2
(D2)
DAB3
(D3)
CONTINUED ON THE NEXT PAGE
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in to a preset DAB
service
3 Tune in to an ensemble you want.
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, “Storing DAB
services in memory” on pages 37 and 38.
4 Select a service of the ensemble you
want to listen to.
Before you start....
Press FM/AM (DAB) briefly if tape, CD changer,
or external component is the current source.
To select the next service
1 Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
To select the previous
service
5 Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
DAB
FM/AM
2 Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
DAB1
(D1)
DAB2
(D2)
DAB3
(D3)
Selected band/preset number and “MEMO”
(memory) appear alternately for a while.
3 Select the number (1 – 6) for the
preset DAB service (primary) you
want.
6 Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
Note:
• You can only preset primary DAB services. If you
store a secondary service, its primary service will
be stored instead.
If the selected primary service has some secondary
services, pressing the same number button repeatedly
will tune in to the secondary services.
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
What you can do more with
DAB
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 12) is also activated automatically.
On the other hand, Network-Tracking Reception
cannot be deactivated without deactivating
Alternative Reception.
Tracing the same program automatically
(Alternative Reception)
You can keep listening to the same program.
• While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same program as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
To adjust the DAB volume level
You can adjust the volume level of DAB tuner
and store it in memory. By adjusting the volume
level properly to match it to the FM sound level,
you will not need to adjust the volume level each
time you change the source.
When shipped from the factory, DAB volume
level is set at “00.”
• See also “Changing the general settings
(PSM)” on page 25.
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
inconveniently. This change in the volume level results
from unequal audio injection levels at broadcaster
site, but not from the malfunction of this unit.
To prevent this inconvenience, you can adjust the DAB
volume level (see the right column).
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press ¢
or 4
to select “DAB VOL”
(DAB volume).
3 Turn the control dial to set to the desired
volume.
You can set it from “VOL –12” to “VOL 12.”
4 Press SEL (select) to finish the setting.
To use Alternative Reception
When shipped from the factory, Alternative
Reception is activated.
• See also “Changing the general settings
(PSM)” on page 25.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press ¢
or 4
(alternative frequency).
to select “DAB AF”
3 Turn the control dial to select the desired
mode.
• AF ON: Traces the program among DAB
services and FM RDS stations
—Alternative Reception. The AF
indicator lights up on the display
(see page 12).
• AF OFF: Alternative Reception is
deactivated.
4 Press SEL (select) to finish the setting.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to the Adjust it to the optimum level.
minimum level.
Connections are incorrect.
Check the cords and
connections.
• This unit does not work at
all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Signals are too weak.
Store stations manually.
• Static noise while listening
to the radio.
The aerial is not connected
firmly.
Connect the aerial firmly.
• A cassette tape cannot be
ejected.
Cassette is locked.
Unlock the cassette.
(See page 22.)
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing right.
• Cassette tapes become
hot.
This is not a malfunction.
The tape head is dirty.
• Tape sound is at very low
level and sound quality is
degraded.
Clean it with a head cleaning
tape.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
• “NO DISC” appears on the
display.
No disc is in the magazine.
Insert discs into the
magazine.
Discs are inserted upside down. Insert discs correctly.
Discs are unplayable.
Insert playable discs.
Insert the magazine.
• “NO MAG” appears on the
display.
No magazine is loaded in the
CD changer.
• “NO FILES” appears on the The current disc does not
Insert a disc that contains
MP3 files.
display.
contain any MP3 files.
• MP3 disc is skipped or
cannot be played back.
MP3 files do not have the
extension code—mp3 in their
file names.
Add the extension code
—mp3 to their file names.
MP3 files are not recorded in
the format compliant with ISO
Change the disc.
(Record MP3 files using a
9660 Level 1, Level 2, or Joliet. compliant application.)
• Noise is generated while
playing an MP3 disc.
The file played back is not an
MP3 file (although it has the
extension code—mp3).
Skip to another file or change
the disc. (Do not add the
extension code—mp3 to non-
MP3 files.)
• A longer readout time is
required for an MP3 disc
(“CHECK” keeps flashing on configuration.
the display).
Readout time varies due to the
complexity of the folder/file
Do not use too many
hierarchies and folders. Also,
do not record any other types
of audio tracks together with
MP3 files.
• MP3 files cannot be played
back as you have intended
them to play.
Playback order is determined
when the files are recorded.
• Elapsed playing time is not
correct for an MP3 disc.
This sometimes occurs during
play. This is caused by how the
files are recorded on the disc.
• “RESET 8” appears on the
display.
This unit is not connected to the Connect this unit and the
CD changer correctly.
CD changer correctly and
press the reset button of the
CD changer.
• “RESET 1” – “RESET 7”
appears on the display.
Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer may Press the reset button on the
have function incorrectly due to panel holder after detaching
noise, etc.
the control panel. (The clock
setting and preset stations
stored in memory are
erased.) (See page 2.)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
This unit requires very little attention, but you will
be able to extend the life of the unit if you follow
the instructions below.
CAUTION:
• Do not play the cassettes with peeling labels;
otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape
may become entangled with the mechanism.
• Do not leave a cassette in the cassette
compartment after use, as the tape may become
slack.
To clean the head
The function below is also provided to ensure the
longer life of this unit.
Ignition key-off release/Ignition key-on
play
• Turning off the ignition key with a cassette in
the compartment automatically releases the
tape from the unit’s tapehead.
• Turning on the ignition key with a cassette in
the compartment starts playback automatically
if you turned off the ignition during tape play.
• Clean the heads after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
• Always store the cassettes in their storage
cases after use.
• Do not store cassettes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
CASSETTE DECK SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Wow & Flutter: 0.11% (WRMS)
Fast-Wind Time: 100 sec. (C-60)
Frequency Response (Dolby B NR OFF):
30 Hz to 16 000 Hz (Normal tape)
Signal-to-Noise Ratio: 56 dB (Normal tape)
(Dolby B NR ON): 65 dB
Front:
Rear:
50 W per channel
50 W per channel
Continuous Power Output (RMS):
Front:
19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
(Dolby B NR OFF): 56 dB
Stereo Separation: 40 dB
Rear:
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Tone Control Range:
Bass:
Treble:
10 dB at 100 Hz
10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩ load (250 nWb/m)
Output Impedance: 1 kΩ
Installation Size (approx.):
182 mm × 52 mm × 150 mm
Panel Size (approx.):
188 mm × 58 mm × 12 mm
Mass (approx.):
TUNER SECTION
Frequency Range:
1.5 kg (excluding accessories)
FM:
AM:
87.5 MHz to 108.0 MHz
(MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity:
11.3 dBf (1.0 µV/75 Ω)
Design and specifications are subject to change
without notice.
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Hebt u PROBLEMEN met de bediening?
Stel het apparaat terug
Zie de pagina met de paragraaf Het apparaat terugstellen
0403KKSMDTJEIN
EN, GE, FR, NL
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
J
C
V
Download from Www.Somanuals.com. All Manuals Search And Download.
KS-LH60R
Installation/Connection Manual
Einbau/Anschlußanleitung
Manuel d’installation/raccordement
Handleiding voor installatie/aansluiting
GET0127-003A
[E/EX]
0403KKSMDTJEIN
EN, GE, FR, NL
J
C
V
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
• This unit is designed to operate on 12 V DC,
NEGATIVE ground electrical systems.
• Dieses Gerät ist für einen Betrieb in elektrischen
Anlagen mit 12 V Gleichstrom und (–) Erdung
ausgelegt.
• Cet appareil est conçu pour fonctionner sur des
sources de courant continu de 12 V à masse
NEGATIVE.
• Dit apparaat mag worden gebruikt bij elektrische
systemen die werken op 12 V gelijkstroom met negatieve
aarding.
INSTALLATION
EINBAU
INSTALLATION (MONTAGE
INSTALLATIE (INBOUW IN
(IN-DASH MOUNTING)
(IM ARMATURENBRETT)
DANS LE TABLEAU DE BORD) HET DASHBOARD)
• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen
• L’illustration suivante est un exemple d’installation
typique. Cependant, vous devez faire les
ajustements correspondant à votre voiture
particulière. Si vous avez des questions ou avez
besoin d’information sur des kits d’installation,
consulter votre revendeur d’autoradios JVC ou une
compagnie d’approvisionnement.
• Op de volgende afbeelding kunt u zien hoe de installatie,
However, you should make adjustments
corresponding to your specific car. If you have any
questions or require information regarding
installation kits, consult your JVC IN-CAR
ENTERTAINMENT dealer or a company supplying
kits.
Einbau. Dennoch müssen Sie entsprechend Ihrem
jeweiligen Auto Anpassungen vornehmen. Bei
irgendwelchen Fragen oder wenn Sie Informationen
hinsichtlich des Einbausatzes brauchen, wenden
Sie sich an ihren JVC Autoradiohändler oder ein
Unternehmen das diese Einbausätze vertreibt.
normaal gesproken, in zijn werk gaat. U moet echter bij
de installatie rekening houden met de bijzonderheden
van uw eigen auto. Neem bij vragen of voor meer
bijzonderheden over inbouwpakketten contact op met uw
JVC car audio dealer of een dealer of een bedrijf dat
inbouwpakketten levert.
1 Before mounting: Press
(control panel
release button) to detach the control panel if
already attached.
1 Vor dem Einbau: Drücken Sie
(Freigabe der 1 Avant le montage: Appuyer sur
(déblocage
du panneau de commande) pour éventeullement
détacher le panneau de commande.
1 Voordat u aan de montage van het apparaat
Schalttafel), um die Arretierung der Schalttafel zu
lösen, sofern diese bereits angebracht ist.
begint: Druk op
(het bedieningspaneel
vrijgeven) als u het bedieningspaneel wilt
loskoppelen indien dit aan de eenheid is
vastgekoppeld.
* When shipped from the factory, the control
panel is packed in the hard case.
* Bei der Auslieferung ab Werk ist die Schalttafel
im Etui verpackt.
* Lorsque ce panneau de commande sort d’usine,
il est rangé dans un étui de transport.
* Standaard wordt het bedieningspaneel bij het
verlaten van de fabriek los verpackt meegeleverd.
2 Den Frontrahmen herausnehmen.
2 Retirer la plaque d’assemblage.
2 Remove the trim plate.
3 Die Halterung nach dem Entriegeln der
3 Libérer les verrous du manchon et retirer le manchon.
1 Poser l’appareil à la verticale.
3 Remove the sleeve after disengaging the sleeve
2 Verwijder de sierplaat.
Halterungensperren abnehmen.
locks.
3 Verwijder het huis nadat u de klemmen hebt
1 Das Gerät aufstellen.
1 Stand the unit.
Remarque: Lorsque vous mettez l’appareil à la
verticale, faire attention de ne pas
endommager le fusible situé sur l’arrière.
losgemaakt.
Hinweis: Beim Aufstellen des Geräts darauf
achten, daß die Sicherung auf der Rückseite
nicht beschädigt wird.
Note: When you stand the unit, be careful
not to damage the fuse on the rear.
1 Zet het apparaat rechtop.
Opmerking: Wanneer u het apparaat rechtop
zet, moet u erop letten dat u de zekering aan de
achterkant niet beschadigt.
2 Insérer les 2 poignées entre l’appareil et le
manchon comme indiqué pour désengagé les
verrous de manchon.
2 Insert the 2 handles between the unit and
the sleeve, as illustrated, to disengage the
sleeve locks.
2 Die 2 Griffe zwischen dem Gerät und der
Halterung wie abgebildet einstecken und die
Halterungensperren entriegeln.
2 Plaats de 2 hendels, zoals afgebeeld, tussen het
apparaat en het huis, om de klemmen los te
maken.
3 Retirer le manchon.
3 Remove the sleeve.
3 Die Halterung entfernen.
Remarque: S’assurer de garder les poignées
pour une utilisation ultérieur, après l’installation
de l’appareil.
Note: Be sure to keep the handles for future
use after installing the unit.
Hinweis: Sicherstellen, daß die Griffe für
künftigen Gebrauch nach dem Einbau des
Geräts aufbewahrt werden.
3 Verwijder het huis.
4 Install the sleeve into the dashboard.
Opmerking: Bewaar de hendels nadat u het
apparaat hebt geïnstalleerd, zodat u ze ook in de
toekomst kunt gebruiken.
4 Installer le manchon dans le tableau de bord.
* After the sleeve is correctly installed into the
dashboard, bend the appropriate tabs to hold
the sleeve firmly in place, as illustrated.
4 Die Halterung im Armaturenbrett einbauen.
* Après installation correcte du manchon dans le
tableau de bord, plier les bonnes pattes pour
maintenir fermement le manchon en place,
comme montré.
* Nach dem korrekten Einbau der Halterung im
Armaturenbrett, die entsprechenden Riegel
umknicken, um die Halterung an ihrem Platz zu
sichern, siehe Abbildung.
4 Installeer het huis in het dashboard.
* Nadat het huis op de juiste wijze in het dashboard
is geplaatst, moet u de palletjes, zoals afgebeeld,
stevig op hun plaats duwen.
5 Fix the mounting bolt to the rear of the unit’s
body and place the rubber cushion over the end
of the bolt.
5 Monter le boulon de montage sur l’arrière du corps
de l’appareil puis passer l’amortisseur en
caoutchouc sur l’extrémité du boulon.
5 Die Befestigungsschraube an der Rückseite des
Gerätekörpers befestigen und das Ende der
Schraube mit einem Gummipuffer abdecken.
5 Maak de bevestigingsbout aan de achterkant van het
apparaat vast en plaats de rubberdop over het uiteinde
van de bout.
6 Do the required electrical connections.
7 Slide the unit into the sleeve until it is locked.
8 Attach the trim plate.
6 Réalisez les connexions électriques.
6 Nehmen Sie die erforderlichen elektrischen
Anschlüsse vor.
6 Breng de vereiste elektrische verbindingen tot stand.
7 Schuif het apparaat in het huis totdat het vergrendeld is.
8 Bevestig een sierplaat.
7 Faire glisser l’appareil dans le manchon jusqu’à ce
qu’il soit verrouillé.
Note: Ensure the recessed part is at the bottom. 7 Das Gerät in die Halterung schieben, bis es einrastet.
If not, the control panel will not open completely.
8 Attachez la plaque d’assemblage.
8 Befestigen Sie den Frontrahmen.
9 Attach the control panel.
Remarque: Assurez-vous que la partie encastrée
est en bas. Sinon, le panneau de commande ne
pourra pas être ouvert complètement.
Hinweis: Vergewissern Sie sich, dass sich die
Opmerking: Zorg dat het ingedeukte gedeelte onder
is. Het bedieningspaneel kan anders namelijk niet
geheel worden geopend.
Aussparung an der Unterseite befindet. Ist dies
nicht der Fall, lässt sich die Bedienungsblende
nicht vollständig öffnen.
9 Remonter le panneau de commande.
9 Bevestig het bedieningspaneel.
9 Die Schalttafel anbringen.
Control panel
Schalttafel
Panneau de commande
Bedieningspaneel
Trim plate
Dashboard
1
3
2
Frontrahmen
Plaque d’assemblage
Sierplaat
Armaturenbrett
Tableau de bord
Dashboard
Rubber cushion
Gummipuffer
Amortisseur en
caoutchouc
Rubberdop
184 mm
Sleeve
Halterung
Manchon
53 mm
4
Huis
Handle
Griff
7
5
Poignée
Hendel
Mounting bolt
Befestigungsschraube
Boulon de montage
Bevestigingsbout
8
9
4 *
6
Slot
See “ELECTRICAL CONNECTIONS.”
Siehe „ELEKTRISCHE ANSCHLÜSSE“.
Référez-vous “RACCORDEMENTS
ELECTRIQUES” .
Fuse
Schlitz
Fente
Sleuf
Sicherung
Fusible
Zekering
Trim plate
Control panel
Frontrahmen
Plaque d’assemblage
Sierplaat
Schalttafel
Sleeve
Zie “ELEKTRISCHE VERBINDINGEN”.
Panneau de commande
Bedieningspaneel
Halterung
Manchon
Huis
Lock Plate
Arretierplättchen
Plaque de verrouillage
Vergrendelingsplaat
TROUBLESHOOTING
* Are the red and black leads connected correctly?
• Power cannot be turned on.
* Is the yellow lead connected?
FEHLERSUCHE
EN CAS DE DIFFICULTES
* Les fils rouge et noir sont-ils racordés
correctement?
• L’appareil ne peut pas être mise sous tension.
* Le fil jaune est-elle raccordée?
PROBLEMEN OPLOSSEN
• The fuse blows.
• Die Sicherung brennt durch.
* Sind die roten und schwarzen Leitungen richtig
angeschlossen?
• Le fusible saute.
• De zekering slaat door.
* Zijn de rode en de zwarte draden op de juiste manier
aangesloten?
• Stromversorgung kann nicht eingeschaltet
werden.
* Ist die gelbe Leitung angeschlossen?
• Kein Ton aus den Lautsprechern.
Ist die Lautsprecherausgangsleitung kurzgeschlossen?
• De stroom kan niet worden ingeschakeld.
* Is de gele draad aangesloten?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Pas de son des enceintes.
* Le fil de sortie d’enceinte est-il court-circuité?
• Er komt geen geluid uit de speakers.
* Is de uitgaande speakerdraad kortgesloten?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded • Ton verzerrt.
in common?
*
• Le son est déformé.
• Het geluid wordt vervormd.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-
elles mises ensemble à la masse?
* Is de uitgaande speakerdraad geaard?
* Zijn de “–” polen van de linker- en de rechterspeakers
gemeenschappelijk geaard?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und
rechten Lautsprecher zusammen geerdet?
• Unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded • Gerät wird heiß.
in common?
• L’appareil devient chaud.
• Het apparaat raakt verhit.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-
elles mises ensemble à la masse?
* Is de uitgaande speakerdraad geaard?
* Zijn de “–” polen van de linker- en de rechterspeakers
gemeenschappelijk geaard?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und
rechten Lautsprecher zusammen geerdet?
1
Download from Www.Somanuals.com. All Manuals Search And Download.
• When using the optional stay
• When installing the unit without using the sleeve
• Beim Einbau des Geräts ohne Halterung
• Beim Verwenden der Anker-Option
• Lors de l’utilisation du hauban en option
• Wanneer u de steun gebruikt (facultatief)
• Lors de l’installation de l’appareil scans utiliser de manchon
• Wanneer u het apparaat zonder huis installeert
In a Toyota for example, first remove the car radio and install the unit in its place.
Stay (option)
Anker (Option)
Hauban (en option)
Steun (facultatief)
Fire wall
Feuerwand
Cloison
Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.
Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.
Washer
Unterlegscheibe
Rondelle
Brandscherm
Sluitring
Lock nut
* Not included with this unit.
Flat type screws (M5 x 6 mm)*
Senkkopfschrauben (M5 x 6 mm)*
Vis à tête plate (M5 x 6 mm)*
Platkopschroeven (M5 x 6 mm)*
Sicherungsmutter
Ecrou d’arrêt
Contra-moer
* Nicht Teil dieses Geräts.
* Non fourni avec cet appareil.
* Niet meegeleverd.
Dashboard
Bracket*
Konsole*
Support*
Console*
Armaturenbrett
Tableau de bord
Dashboard
Screw (option)
Schraube (Option)
Vis (en option)
Flat type screws (M5 x 6 mm)*
Senkkopfschrauben (M5 x 6 mm)*
Vis à tête plate (M5 x 6 mm)*
Platkopschroeven (M5 x 6 mm)*
Schroef (facultatief)
Pocket
Taschen
Poche
Zak
Sleeve
Halterung
Manchon
Mounting bolt
Bracket*
Konsole*
Support*
Console*
Befestigungsschraube
Boulon de montage
Bevestigingsbout
Huis
Note
: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are
used, they could damage the unit.
: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden.
Werden längere Schrauben verwendet, können sie das Gerät beschädigen.
Install the unit at an angle of less
than 30˚.
Stellen Sie das Gerät mit einem
Winkel von weniger als 30˚ auf.
Installez l’appareil avec un angle de
moins de 30˚.
Less than 30˚
Hinweis
Weniger als 30˚
Moins de 30˚
Kleiner dan 30˚
Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm.
Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.
Opmerking : Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere
Installeer het toestel met een hoek
kleiner dan 30˚.
schroeven gebruikt, kan het apparaat worden beschadigd.
Removing the unit
•1BeRfoermeorevemtohveincgotnhtreoul npait,nreel.lease the rear section.
Ausbau des Geräts
• Vor dem Ausbau des Geräts den hinteren Teil
Retrait de l’appareil
Verwijderen van het apparaat
• Voordat u het apparaat verwijdert, moet u het
1acVhteerrwgeijddeeerltheeltobsemdaiekneinn.gspaneel.
•1AvRaenttirdeer rleetpiraenrnl’eaapupadreeicl,olimbémrearndlae.section arrière.
1freDigeenbSecnh. alttafel abnehmen.
2
3
Remove the trim plate.
2
3
Retirer la plaque d’assemblage.
2
Den Frontrahmen herausnehmen.
2
3
Verwijder de sierplaat.
Insert the 2 handles into the slots, as shown.
Introduire les 2 poignées dans les fentes, comme
montré. Puis, tout en tirant doucement les
poignées écartées, faire glisser l’appareil pour le
sortir. (S’assurer de conserver les poignées
après l’installation de l’appareil.)
Then, while gently pulling the handles away from 3 Die 2 Griffe in die Schlitze wie gezeigt stecken.
Plaats de 2 hendels, zoals afgebeeld, in de sleuven.
Daarna duwt u de hendels zachtjes uit elkaar en kunt u
het apparaat naar buiten schuiven. (Bewaar de
hendels nadat u het apparaat hebt
geïnstalleerd!)
each other, slide out the unit. (Be sure to keep
Dann die Griffe behutsam auseinander ziehen
und das Gerät herausziehen. (Die Griffe nach
dem Einbau auf jeden Fall aufbewahren.)
the handles after installing it.)
1
2
3
Control panel
Schalttafel
Panneau de commande
Bedieningspaneel
Trim plate
Frontrahmen
Plaque d’assemblage
Sierplaat
Handle
Griff
Poignée
Hendel
Parts list for installation and
Teileliste für den Einbau und
Liste des pièces pour l’installation et Lijst van onderdelen die u bij
connection
Anschluß
raccordement
installatie en aansluiting nodig hebt
De volgende onderdelen worden bij het apparaat geleverd.
Installeer ze op de juiste wijze, nadat u ze hebt
gecontroleerd.
The following parts are provided with this unit.
After checking them, please set them correctly.
Die folgenden Teile werden zusammen mit diesem
Gerät geliefert.
Nach ihrer Überprüfung, die Teile richtig einsetzen.
Les pièces suivantes sont fournies avec cet appareil.
Après vérification, veuillez les placer correctement.
Hard case/Control panel
Etui/Schalttafel
Etui de transport/Panneau de
commande
Sleeve
Trim plate
Frontrahmen
Power cord
Stromkable
Cordon d’alimentation
Stroomkabel
Handles
Griffe
Poignées
Halterung
Manchon
Huis
Plaque d’assemblage
Sierplaat
Hendels
Behuizing/Bedieningspaneel
Washer (ø5)
Lock nut (M5)
Mounting bolt (M5 x 20 mm)
Rubber cushion
Gummipuffer
Amortisseur en caoutchouc
Rubberdop
Battery
Batterie
Pile
Remote controller
Fernbedienung
Télécommande
Afstandsbediening
Unterlegscheibe(ø5)
Rondelle (ø5)
Sluitring (ø5)
Sicherungsmutter (M5)
Ecrou d’arrêt (M5)
Contra-moer (M5)
Befestigungsschraube (M5 x 20 mm)
Boulon de montage (M5 x 20 mm)
Bevestigingsbout (M5 x 20 mm)
CR2025
Batterij
ELECTRICAL CONNECTIONS
ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN
To prevent short circuits, we recommend that you
Zur Vermeidung von Kurzschlüssen empfehlen wir,
Pour éviter tout court-circuit, nous vous
Om kortsluiting te voorkomen adviseren wij u om de
minpool van de accu los te maken en alle elektrische
verbindingen tot stand te brengen voordat u het apparaat in
disconnect the battery’s negative terminal and make all daß Sie den negativen Batterieanschluß abtrennen
recommandons de débrancher la borne négative de
la batterie et d’effectuer tous les raccordements
électriques avant d’installer l’appareil. Si l’on n’est pas de auto installeert. Als u niet zeker weet hoe u dit apparaat
sûr de pouvoir installer correctement cet appareil, le
faire installer par un technicien qualifié.
electrical connections before installing the unit. If you
are not sure how to install this unit correctly, have it
installed by a qualified technician.
und alle elektrischen Anschlüsse herstellen, bevor
das Gerät eingebaut wird. Sind Sie sich über den
richtigen Einbau des Geräts nicht sicher, lassen Sie
es von einem qualifizierten Techniker einbauen.
moet installeren, kunt u dit beter door een daartoe
gekwalificeerde technicus laten doen.
Note:
This unit is designed to operate on 12 V DC,
Hinweis:
Remarque:
Opmerking:
NEGATIVE ground electrical systems. If your vehicle Dieses Gerät ist für einen Betrieb in elektrischen
Cet appareil est conçu pour fonctionner sur des
sources de courant continu de 12 V à masse
NEGATIVE. Si votre véhicule n’offre pas ce type
d’alimentation, il vous faut un convertisseur de
tension, que vous pouvez acheter chez un revendeur
d’autoradios JVC.
Dit apparaat mag worden gebruikt bij elektrische systemen
die werken op 12 V gelijkstroom met negatieve
aarding. Als uw auto niet is uitgerust met een dergelijk
systeem, is een spanningsomzetter vereist. Dit instrument
kan worden aangeschaft bij JVC car audio dealers.
does not have this system, a voltage inverter is
required, which can be purchased at JVC IN-CAR
ENTERTAINMENT dealers.
Anlagen mit 12 V Gleichstrom und (–) Erdung
ausgelegt. Verfügt Ihr Fahrzeug nicht über diese
Anlage, ist ein Spannungsinverter erforderlich, der
bei JVC Autoradiohändler erworben werden kann.
• Replace the fuse with one of the specified rating. If
the fuse blows frequently, consult your JVC IN-CAR
ENTERTAINMENT dealer.
• If noise is a problem...
This unit incorporates a noise filter in the power
• Die Sicherung mit einer der entsprechenden
Nennleistung ersetzen. Brennt die Sicherung
häufig durch, wenden Sie sich an ihren JVC
Autoradiohändler.
• Vervang de zekering door een exemplaar met het
aangegeven vermogen. Als de zekering vaak doorslaat,
moet u uw JVC car audio dealer raadplegen.
• Als u geluidsproblemen hebt…
De krachtschakeling van dit apparaat heeft een ingebouwd
geluidsfilter. In sommige voertuigen zijn tikgeluiden of
andere ongewenste geluiden te horen. Als dit gebeurt,
moet u de massaklem aan de achterkant (zie
aansluitingsschema) aan het chassis van de auto
vastmaken met behulp van een kortere en dikkere kabel,
zoals kopermanteldraad of tellerkabel. Als het geluid niet
verdwijnt, moet u contact opnemen met uw JVC car audio
dealer.
• Remplacer le fusible par un de la valeur précisée. Si
le fusible saute souvent, consulter votre revendeur
d’autoradios JVC.
circuit. However, with some vehicles, clicking or other • Sind Störgeräusche ein Problem...
• Si le bruit est un problème...
unwanted noise may occur. If this happens, connect
the unit’s rear ground terminal (see connection
diagram) to the car’s chassis using shorter and
thicker cords, such as copper braiding or gauge wire.
If noise still persists, consult your JVC IN-CAR
ENTERTAINMENT dealer.
Dieses Gerät enthält ein Störfilter im Stromkreis. Bei
Cet appareil incorpore un filtre de bruit dans le
circuit d’alimentation. Cependant, avec certains
véhicules, quelques claquements ou autres bruits
non désirés risquent de se produire. Si cela arrive,
raccorder la borne arrière de masse de l’appareil
au châssis de la voiture (voir le diagramme de
raccordement) en utiliscant des cordons les plus
gros et les plus courts possibles telle qu’une barre
de cuivre ou une tresse. Si le bruit persiste,
consulter votre revendeur d’autoradios JVC.
• La puisscance admissible des enceintes devrait
manchen Fahrzeugen kann jedoch ein Klicken
oder andere unerwünschte Störgeräusche
auftreten. Sollte das der Fall sein, die hintere
Erdungscanschlußklemme (siehe Schaltplan) des
Geräts am Fahrwerk des Fahrzeugs anschließen,
dabei kürzere und dickere Kabel wie
• Maximum input of the speakers should be more than
50 W at the rear and 50 W at the front, with an
impedance of 4 Ω to 8 Ω.
beispielsweise Kupfergeflechtdraht oder Stahldraht
verwenden. Bleibt Störgeräusch bestehen, wenden
Sie sich an Ihren JVC Autoradiohändler.
• Het maximum ingangsvermogen van de speakers moet
achterin meer dan 50 W zijn en voorin 50 W, met een
impedantie van 4 Ω tot 8 Ω.
• Be sure to ground this unit to the car’s chassis.
• The heat sink becomes very hot after use. Be careful • Die maximale Eingangsleistung der Lautsprecher
not to touch it when removing this unit.
sollte mehr als 50 W hinten und 50 W vorn bei einer
Impedanz von 4 Ω bis 8 Ω betragen.
• Sicherstellen, daß das Gerät am Fahrwerk
geerdet wird.
• Das Abstrahlblech wird nach dem Gebrauch sehr
heiß. Beim Ausbau des Geräts darauf achten, das
Abstrahlblech nicht zu berühren.
supérieure à 50 W à l’arrière et à 50 W l’avant, avec • Zorg ervoor dat dit apparaat door middel van een
une impédance de 4 Ω à 8 Ω.
• S’assurer de raccorder la mise à la masse de
cet appareil au châssis de la voiture.
• Le dissipateur de chaleur devient très chaud après
usage. Faire attention de ne pas le toucher en
retirant cet appareil.
aardkabel is verbonden met het chassis van de
auto.
• De warmte-opnemer kan na gebruik erg heet worden.
Raak de warmte-opnemer niet aan wanneer u dit apparaat
van zijn plaats haalt.
Heat sink
Abstrahlblech
Dissipateur de chaleur
Warmte-opnemer
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen
Before connecting: Check the wiring in the vehicle
carefully. Incorrect connection may cause serious
damage to this unit.
Vor dem Anschließen: Die Verdrahtung im Fahrzeug
sorgfältig überprüfen. Falsche Anschlüsse können
ernsthafte Schäden am Gerät hervorrufen.
Avant de commencer la connexion: Vérifiez
Alvorens te verbinden: Controleer de bedrading in de
auto zorgvuldig. Het apparaat kan door verkeerde
verbinding ernstige schade oplopen. De draden van het
attentivement le câblage du véhicule. Une connexion
incorrecte peut endommager sérieusement l’appareil.
The leads of the power cord and those of the
connector from the car body may be different in
color.
Die Leiter des Stromkabels und die Leiter des Anschlusses Le fil du cordon d’alimentation et ceux des connecteurs stroomsnoer verschillen mogelijk van kleur met de
im Fahrzeug können sich farblich unterscheiden.
du châssis de la voiture peuvent être différents en
couleur.
aansluitingen op het chassis van de auto.
1
Die farbigen Leitungen des Spannunsgversorgungskabels
an der Autobatterie, ontstekingsschakelaarden
Lautsprechern und dem Motorantenne (sofern vorhanden)
in folgender Reihenfolge anschließen.
1 Sluit de gekleurde snoerdraden van de stroomkable in
de hierna genoemde volgorde aan op de accu van de
auto, de luidsprekers en de antenne (indien aanwezig).
1 Zwart: aarde
1 Connect the colored leads of the power cord to
the car battery, speakers and power aerial (if any)
in the following sequence.
1 Connectez les fils de couleur du cordon d’alimentation
à la batterie de la voiture, aux enceintes et à l’antenne
automatique (s’il y en a une) dans l’ordre suivant.
1 Noir: à la masse
1 Black: ground
2 Yellow: to car battery (constant 12 V)
3 Red: to an accessory terminal
4 Blue with white stripe: to remote lead of other
equipment or power aerial if any (200 mA max.)
5 Orange with white stripe: to car light control
switch
6 Brown: to cellular phone system (For details,
refer to the instructions of the cellular phone.)
7 Others: to speakers
1 Schwarz: Erdung
2 Geel: naar de accu van de auto (constant 12 V)
3 Rood: naar de aansluitklem van de accessoire
4 Blauw met witte streep: naar
afstandsbedieningsdraad van andere apparatuur of
antenne met circuit indien aanwezig (200 mA max.)
5 Oranje met witte streep: naar de schakelaar voor de
autoverlichting
2 Gelb: an Autobatterie (konstant 12 V)
3 Rot: zur einer Zubehöranschlußklemme
4 Blau mit weißem Streifen: zum Zusatzkabel des
anderen Geräts oder der Motorantenne, sofern
vorhanden (max. 200 mA)
2 Jaune: à la batterie de la voiture (12 V constant)
3 Rouge: à une borne accessoire
4 Bleu avec bande blanche:au fil de télécommande
de l’autre appareil ou à l’antenne automatique s’il
y en a une (200 mA max.)
5 Orange avec bande blanche: à l’interrupteur
d’éclairage de la voiture
5 Orange mit weißem Streifen: zum Autolichtschalter
6 Braun: an Mobiltelefon (Weitere informationen
entnehmen Sie bitte der Bedienungscanleitung
des Mobiltelefons.)
6 Bruin: naar het mobiele-telefoonsysteem (Lees voor
meer informatie de instructies die bij de mobiele
telefoon worden geleverd.)
6 Marron: à un système de téléphone cellulaire
(Pour les détails, se référer aux instructions du
téléphone cellulaire.)
7 Andere: naar de speakers
7 Andere: zur Lautsprecher
2 Connect the aerial cord.
7 Autres: aux enceintes
2 Sluit de antenne aan.
2 Das Antennenkabel anschließen.
3 Finally connect the wiring harness to the unit.
2 Connectez le cordon d’antenne.
3 Verbind de draadbundel daarna met het apparaat.
3 Die Kabelbäume am Gerät anschließen.
Note: If your vehicle does not have any accessory
terminal, move the fuse from the fuse position 1
(initial position) to fuse position 2, and connect the
red lead (A7) to the positive (+) battery terminal.
• The yellow lead (A4) is not used in this case.
3 Finalement, connectez le faisceau de fils à l’appareil.
Opmerking: Als uw voertuig niet beschikt over een
Hinweis: Verfügt Ihr Fahrzeug nicht über eine
Zubehöranschlußklemme, die Sicherung von der 1.
Sicherungsposition (Erstposition) in die 2.
Remarque: Si votre véhicule ne possède pas de borne aansluitklem, moet u de zekering verplaatsen van stand 1
accessoire, déplacez le fusible de la position de fusible (beginstand) naar stand 2 en moet u de rode draad (A7) met
1 (position originale) à la position de fusible 2 et connectez de pluspool (+) van de accu verbinden.
Sicherungsposition versetzen, die rote Leitung (A7) an
der (+) Batterieanschlußklemme anschließen.
le fil rouge (A7) à la borne positive (+) de la batterie.
• Le fil jaune (A4) n’est pas utilisé dans ce cas.
• In dit geval wordt de gele draad (A4) niet gebruikt.
•
Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet.
JVC CD changer/DAB tuner
or another external
We recommend you to connect the Wir empfehlen Ihnen, den MP3-
JVC MP3-compatible CD changer. kompatiblen CD-Wechsler von
Nous vous recommandons de
connecter le changeur de CD
compatible MP3 JVC. Vous pouvez tevens bepaalde andere CD-wisselaars uit
aussi connecter d’autres de CH-X serie aansluiten (uitgezonderd
changeurs de CD de la série CH-X de CH-X99 en CH-X100).
(sauf le CH-X99 et le CH-X100).
• Vous ne pouvez pas utiliser les
changeurs de CD de la série
KD-MK avec cet appareil.
Sluit bij voorkeur de JVC, MP3
compatibele CD-wisselaar aan. U kunt
component
You can also connect other CH-X
series CD changers (except
CH-X99 and CH-X100).
JVC anzuschließen. Sie können
auch andere CD-Wechsler der
Serie CH-X anschließen (außer
CD-Wechsler von JVC/DAB-
Tuner oder eine andere
externe Komponente
Changeur CD JVC/Tuner
DAB ou autre appareil
extérieur
To steering wheel remote controller
(see diagram
An Lenkradfernbedienung
(siehe Schaltplan
Pour la télécommande de volant
(voir le diagramme
Naar stuurwiel-afstandsbediening
(zie schema
• You cannot use the KD-MK series CH-X99 und CH-X100).
• U kunt CD-wisselaars uit de KD-MK
serie niet met dit toestel gebruiken.
Het is ook mogelijk een extern
apparaat zoals een draagbare MD-
speler aan te sluiten met behulp van de
)
CD changers with this unit.
You can also use an external
component such as a portable MD
• CD-Wechsler der Serie KD-MK
können mit diesem Gerät nicht
verwendet werden.
)
JVC CD-wisselaar/DAB-tuner
of een ander extern apparaat
player by connecting the Line Input Sie können auch eine externe
Adapter KS-U57 (not supplied).
(See diagram .)
Vous pouvez aussi utiliser un
appareil extérieur tel qu’un lecteur Line Input Adapter KS-U57 (niet
)
Komponente, z.B. einen tragbaren
MD-Spieler, verwenden, wenn Sie den de MD en connectant l’adaptateur meegeleverd). (Zie schema .)
(nicht zum Lieferumfang gehörenden) d’entrée de ligne KS-U57 (non
Line-Eingangsadapter KS-U57
)
fourni). (Voir le diagramme ).
anschließen (siehe Schaltplan ).
B1 B3 B5 B7
B2 B4 B6 B8
Fuse position 2 / 2. Sicherungsposition /
Position de fusible 2 / Zekering, stand 2
Rear ground terminal
Hintere
Erdungscanschlußklemme
Borne arrière de masse
Massaklem aan de
achterkant
Fuse position 1 / 1. Sicherungsposition /
Position de fusible 1 / Zekering, stand 1
A5 A7
A2 A4 A6 A8
B1 B3 B5 B7
B2 B4 B6 B8
A5 A7
Not included with this unit.
15 A fuse / 15 A Sicherung /
Fusible 15 A / Zekering 15 A
A2 A4 A6 A8
*
Wird nicht mit Gerät mitgeliefert.
Ignition switch
Zündschalter
Interrupteur d’allumage
Contactschakelaar
1
Non fourni avec cet appareil.
Niet bij het apparaat inbegrepen.
Aerial terminal
Black
Schwarz
Antennenanschlußklemme
Borne de l’antenne
Aansluitpunt antenne
*
To metallic body or chassis of the car
Line out (see
Noir
Zwart
A8
Zur metallenen Karosserie oder zum Fahrwerk des Autos
Vers corps métallique ou châssis de la voiture
Naar metalen ondergrond of chassis van de auto
*
diagram
)
Schutz kappen
Signalausgang
(siehe Schaltplan
Sortie de ligne
1
Yellow*1
Gelb*1
Jaune*1
Geel *1
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch)
Zur einer stromführenden Anschlußklemme im Sicherungsblock
zum Anschließen an die Autobatterie (Umgehen des
Zündschalters)
A une borne sous tension du porte-fusible connectée à la batterie
de la voiture (en dérivant l’interrupteur d’allumage)
Naar een onder spanning staande aansluitklem in het zekeringblok die is
aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)
3
2
)
(voir le diagramme
Uitgang (zie schema
)
)
To aerial
A4
Zur Antenne
A l’antenne
Naar de antenne
2
Red
Rot
Rouge
Rood
To an accessory terminal in the fuse block
Zur einer Zubehöranschlußklemme im Sicherungsblock
Vers borne accessoire du porte-fusible
Fuse block
Sicherungsblock
Porte-fusible
A7
3
Naar een aansluitklem in het zekeringblok
*1 : Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
*1 : Vor der Überprüfung der Funktionsfähigkeit des Geräts
vor dem Einbau, muß diese Leitung angeschlossen
werden, da sonst die Stromversorgung nicht
eingeschaltet werden kann.
*1 : Pour vérifier le fonctionnement de cet appareil avant
installation, ce fil doit être raccordé, sinon l’appareil ne
peut pas être mis sous tension.
*1 : Voordat u controleert of het apparaat werkt (alvorens het te
installeren), moet deze draad aangesloten zijn. Als dit niet het
geval is, kan de stroom niet worden ingeschakeld.
Zekeringblok
Blue with white stripe
Blau mit weißem Streifen
Bleu avec bande blanche
Blauw met witte streep
To remote lead of other equipment or power aerial if any
Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une
Naar afstandsbedieningsdraad van andere apparatuur of antenne met circuit indien aanwezig
A5
4
Orange with white stripe
Orange mit weißem Streifen
Orange avec bande blanche
Oranje met witte streep
To car light control switch
Zum Autolichtschalter
A6 5
(ILLUMINATION)
A l’interrupteur d’éclairage de la voiture
Naar de schakelaar voor de autoverlichting
To cellular phone system
Zur Moblitelephon
A un système de téléphone
cellulaire
A2
Brown / Braun / Marron / Bruin
6
Naar het mobiele-telefoonsysteem
7
Purple
Lila
Violet
Paars
White with black stripe
Weiß mit schwarzem
Streifen
Blanc avec bande noire
Wit met zwarte streep
White
Weiß
Blanc
Wit
Gray with black stripe
Grau mit schwarzem
Streifen
Gris avec bande noire
Grijs met zwarte streep
Gray
Grau
Gris
Green with black stripe
Grün mit schwarzem
Streifen
Vert avec bande noire
Groen met zwarte streep
Green
Grün
Vert
Purple with black stripe
Lila mit schwarzem
Streifen
Violet avec bande noire
Paars met zwarte streep
B6
B5
B4
B3
B8
B7
B2
B1
Grijs
Groen
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Linker Lautsprecher (vorne)
Enceinte gauche (avant)
Linkerspeaker (voorin)
Rechter Lautsprecher (vorne)
Enceinte droit (avant)
Rechterspeaker (voorin)
Linker Lautsprecher (hinten)
Enceinte gauche (arrière)
Linkerspeaker (achterin)
Rechter Lautsprecher (hinten)
Enceinte droit (arrière)
Rechterspeaker (achterin)
PRECAUTIONS on power supply and
speaker connections:
• DO NOT connect the speaker leads of the power
cord to the car battery; otherwise, the unit will
be seriously damaged.
• Connect the black lead (ground), yellow lead (to car
battery, constant 12 V), and red lead (to an
accessory terminal) correctly.
• BEFORE connecting the speaker leads of the
power cord to the speakers, check the speaker
wiring in your car.
– If the speaker wiring in your car is as
illustrated in Fig. 1 and Fig. 2 below, DO NOT
connect the unit using that original speaker wiring.
If you do, the unit will be seriously damaged.
Redo the speaker wiring so that you can connect
the unit to the speakers as illustrated in Fig. 3.
– If the speaker wiring in your car is as
illustrated in Fig. 3, you can connect the unit
using the original speaker wiring in your car.
– If you are not sure of the speaker wiring of your
car, consult your car dealer.
VORSICHTSMASSREGELN beim
PRECAUTIONS sur l’alimentation et la
VOORZORGSMAATREGELEN bij het
verbinden van de stroomkabeldraad
Anschließen der Stromversorgung und
connexion des enceintes:
• NE CONNECTEZ PAS les fils d’enceintes du
cordon d’alimentation à la batterie; sinon,
l’appareil serait sérieusement endommagé.
• Connectez correctement le fil noir (a la masse), le fil
jaune (a la batterie de la voiture,12 V constant) et le
fil rouge (à la prise accessoire).
• AVANT de connecter les fils d’enceintes du cordon
d’alimentation aux enceintes, vérifiez le câblage
des enceintes de votre voiture.
– Si le câblage des enceintes de votre voiture
est comme montré sur la Fig. 1 ou Fig. 2
ci-dessous, NE CONNECTEZ PAS l’appareil en
utiliscant ce câblage original des enceintes. Si
vous le faites, l’appareil sera sérieusement
endommagé.
Recommencez le câblage des enceintes de façon
que vous puissiez connecter l’appareil aux
enceintes comme montré sur la Fig. 3.
Lautsprecher:
met de speakers:
• Die Lautsprecherleitungen des Netzkabels
NICHT an der Autobatterie anschließen, da
sonst das Gerät schwer beschädigt wird.
• Die schwarze Leitung (Erdung), die gelbe Leitung
(zur Autobatterie, konstant 12 V) und die rote Leitung
(zur Zubehöranschlußklemme) richtig anschließen.
• VOR dem Anschließen der Lautsprecherleitungen
des Spannunsgversorgungskabels an die
Lautsprecher, die Lautsprecherverdrahtung in
Ihrem Auto überprüfen.
• Verbind de speakerdraden van de stroomkabel
NIET met de accu van de auto; als u dit wel doet,
zal het apparaat ernstige schade oplopen.
• Sluit de zwarte draad (aarde), de gele draad (naar de accu
van de auto, constant 12 V) en de rode draad (naar de
aansluitklem van de accessoire) op de juiste wijze aan.
• VOORDAT u de speakerdraden van de stroomkabel met
de speakers verbindt, moet u de bedrading van de
speakers in uw auto controleren.
– Als de bedrading van de speakers eruitziet
zoals hieronder staat afgebeeld in Fig. 1 en
Fig. 2, mag het apparaat NIET worden aangesloten
met behulp van deze oorspronkelijke
speakerbedrading. Als u dat wel doet, zal het apparaat
ernstige schade oplopen.
Pas de bedrading van de speakers aan, zodat u het
apparaat met de speakers kunt verbinden, zoals staat
afgebeeld in Fig. 3.
– Als de bedrading van de speakers eruitziet
zoals staat afgebeeld in Fig. 3, kunt u het
apparaat aansluiten met behulp van de oorspronkelijke
speakerbedrading in uw auto.
– Als u twijfels hebt over de speakerbedrading in uw
auto, moet u contact opnemen met uw autodealer.
– Ist die Lautsprecherverdrahtung wie unten in
„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät
NICHT mit der Originalverdrahtung der
Lautsprecher anschließen, da sonst das Gerät
schwer beschädigt wird.
Die Lautsprecherverdrahtung erneuern, so daß
Sie das Gerät an den Lautsprechern wie in
„Fig. 3“ abgebildet anschließen können.
– Ist die Lautsprecherverdrahtung in Ihrem Auto
wie in „Fig. 3“ abgebildet, können Sie das Gerät
mit der Originalverdrahtung der Lautsprecher in
Ihrem Auto anschließen.
– Si le câblage des enceintes de votre voiture
est comme montré sur la Fig. 3, vous pouvez
connecter l’appareil en utiliscant ce câblage
original d’enceintes pour votre voiture.
– Si vous n’êtes pas sûrs du câblage d’enceintes de
votre voiture, consulter le concessionnaire de
votre voiture.
+
+
+
+
-
+
-
+
-
L
-
L
L
-
-
+
+
-
+
+
– Sind Sie sich über die Lautsprecherverdrahtung
in Ihrem Auto nicht sicher, wenden Sie sich an
Ihren Autohändler.
+
-
+
-
R
-
R
R
-
-
Fig. 1
Fig. 2
Fig. 3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden
Twist the core wires when connecting.
Die Kerndrähte beim Anschließen verdrehen.
CAUTION / VORSICHT / PRECAUTION / LET OP!:
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.
• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN Leitungen
mit Isolierklebeband umwickeln.
Torsader les âmes des fils en les raccordant.
Draai de kerndraden om elkaar heen wanneer u ze wilt aansluiten.
• Pour éviter les court-circuits, couvrir les
bornes des fils qui ne sont PAS UTILISÉS
avec de la bande isolante.
• Om kortsluiting te voorkomen, moet u de
Solder the core wires to connect them securely.
aansluitklemmen van ONGEBRUIKTE
gekleurde draden met isolatieband bedekken.
Die Kerndrähte anlöten, um sie fest anzuschließen.
Souder les âmes des fils pour les raccorder entre eux de façon sûre.
Soldeer de kerndraden zodat ze stevig vast zitten.
Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /
Aansluitingen voor het toevoegen van andere apparatuur
You can connect an amplifier and other equipment to Sie können einen Verstärker oder ein anderes Gerät
upgrade your car stereo system. anschließen, um Ihre Autostereoanlage zu erweitern.
Vous pouvez connecter un amplificateur ou autre
appareil pour améliorer votre système autoradio.
• Connectez le fil de commande à distance (bleu
avec bande blanche) au fil de commande à
distance de l’autre appareil de façon qu’il puisse
être commandé via cet appareil.
Het is mogelijk om uw autostereosysteem uit te breiden
met een versterker of andere apparatuur.
• Verbind de afstandsbedieningsdraad (blauw met witte
streep) met de afstandsbedieningsdraad van andere
apparatuur zodat deze op afstand via dit apparaat kan
worden bediend.
• Alleen voor een versterker:
– Verbind de uitgang van het apparaat met de ingang
van de versterker.
– Koppel de speakers van dit apparaat los en
verbind ze aan de versterker. Gebruik de
speakerdraden van dit apparaat niet. (Plak
de aansluitklemmen van deze
speakerdraden met isolatieband af zoals
hierboven is afgebeeld.)
• Connect the remote lead (blue with white stripe) to • Schließen Sie das Fernbedienungskabel (blau mit
the remote lead of the other equipment so that it
can be controlled through this unit.
weißem Streifen) an das Fernbedienungskabel des
anderen Geräts an, so daß es über dieses Gerät
gesteuert werden kann.
• For amplifier only:
– Connect this unit’s line-out terminals to the
amplifier’s line-in terminals.
– Disconnect the speakers from this unit,
connect them to the amplifier. Leave the
speaker leads of this unit unused. (Cover the
terminals of these unused leads with
insulating tape, as illustrated above.)
• Nur für den Verstärker:
• Pour l’amplificateur seulement:
– Die Anschlußklemmen am Ausgang dieses Gerät
an den Anschlußklemmen des Eingangs des
Verstärkers anschließen.
– Die Lautsprecher von diesem Gerät abtrennen
und am Verstärker anschließen. Die
– Raccorder les bornes de sortie ligne de cet appareil
aux bornes d’entrée ligne de l’amplificateur.
– Déconnectez les enceintes de cet appareil et
connectez-les à l’amplificateur. Laissez les fils
d’enceintes de cet appareil inutilisés.
(Recouvrir les extrémités de ces fils inutilisés
avec de la bande isolante comme montré ci-
dessus.)
Lautsprecherleitungen dieses Geräts unbenutzt
lassen. (Die Anschlußklemmen dieser nicht
verwendeten Leitungen mit Isolierklebeband
umwickeln, siehe Abbidung oben.)
Amplifier / Verstärker / Amplificateur / Versterker
Rear speakers
Hintere Lautsprecher
Enceintes arrière
Achterspeakers
Remote lead
*2 : Firmly attach the ground wire to the metallic
body or to the chassis of the car—to the place
not coated with paint (if coated with paint,
remove the paint before attaching the wire).
Failure to do so may cause damage to the unit.
*2 : Verbinden Sie den Erdungsleiter mit der
Karosserie oder dem Rahmen des
Y-connector (not supplied with this unit)
Fernbedienungsleitung
Fil d’alimentation à distance
Afstandsbedieningsdraad
Y-Anschluß (nicht mit diesem Gerät mitgeliefert)
Connecteur Y (non fourni avec cet appareil)
Y-connector (wordt niet bij dit apparaat geleverd)
INPUT
L
JVC Amplifier
L
JVC Verstärker
JVC Amplificateur
JVC Versterker
To power aerial if any
Zur Motorantenne, sofern
vorhanden
Vers l’antenne automatique, s’il y
en a une
Naar de antenne (indien aanwezig)
Fahrzeugs. Die Kntaktstelle darf nicht lackiert
sein (sollte die Kontaktstelle lackiert sein,
entfernen Sie den Lack der Kontaktstelle,
bevor Sie den Leiter befestigen). Wenn der
Erdungsleiter nicht ordnungsgemäß
angeschlossen wird, kann dieses Gerät
beschädigt werden.
R
R
Blue with white stripe
Blau mit weißem Streifen
Bleu avec bande blanche
Blauw met witte streep
Signal cord (not supplied with this unit)
Einzelleitung (nicht mit diesem Gerät mitgeliefert)
Cordon de signal (non fourni avec cet appareil)
Signaalkabel (wordt niet bij dit apparaat geleverd)
2
*
*2 : Attachez solidement le fil de mise à la masse
au châssis métallique de la voiture—à un
endroit qui n’est pas recouvert de peinture (s’il
est recouvert de peinture, enlevez d’abord la
peinture avant d’attacher le fil). L’appareil peut
être endommagé si cela n’est pas fait
correctement.
*2 : Bevestig de aardedraad goed met een metalen
onderdeel of het chassis van de auto—bevestig op
een niet-gelakt gedeelte (indien gelakt, schuur dan
af alvorens de draad te bevestigen). Het toestel kan
worden beschadigd indien de aardedraad niet goed
is aangesloten.
OUT
LINE
INPUT
L
L
Front speakers
Vordere Lautsprecher
Enceintes avant
Voorspeakers
JVC Amplifier
JVC Verstärker
JVC Amplificateur
JVC Versterker
L
L
L
R
R
R
R
R
REAR FRONT
2
Front speakers
Vordere Lautsprecher
Enceintes avant
KS-LH60R
*
You can connect another power amplifier for front speakers.
Sie können einen anderen Leistungsverstärker für die vorderen Lautsprecher
anschließen.
Voorspeakers
Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant.
U kunt nog een eindversterker voor de voorspeakers aansluiten.
CD changer and DAB tuner / CD-Wechsler und DAB-Tuner / Changeur CD et tuner DAB / CD-wisselaar en DAB-tuner
You can connect a JVC CD changer and/or a JVC
DAB (Digital Audio Broadcasting) tuner.
• For their connections, refer to the Instructions
supplied with them.
Sie können einen CD-Wechsler und/oder einen
DAB-Tuner (Tuner für digitalen Rundfunk) von JVC
anschließen.
• Weitere Informationen über den Anschluß können
Sie der Bedienungsanleitong entnehmen, die dem
jeweiligen Gerät beiliegt.
Vous pouvez connecter un changeur CD JVC et/ou
un tuner DAB (Digital Audio Broadcasting) JVC.
• Pour leurs connexions, référez-vous aux “Manuel
d’instructions” qui les accompagnent.
Het is mogelijk een JVC CD-wisselaar en/of JVC
DAB-tuner (Digital Audio Broadcasting) aan te sluiten.
• Zie de Gebruiksaanwijzing van deze apparaten voor
meer informatie over het tot stand brengen van deze
aansluiting.
Connecting cord supplied with your DAB tuner or CD changer
Verbindungskabel, das zum Lieferumfang des DAB-Tuners oder CD-Wechslers gehört
Cordon de connexion fourni avec votre tuner DAB ou changeur CD
Connecting cord supplied with your CD changer
Verbindungskabel, das zum Lieferumfang des
CD-Wechsler gehört
Cordon de connexion fourni avec votre changeur CD
Verbindingskabel die met de CD-wisselaar wordt
meegeleverd
Connecting cord supplied with your DAB tuner
Verbindungskabel, das zum Lieferumfang des DAB-
Tuners gehört
Cordon de connexion fourni avec votre tuner DAB
Verbindingskabel die met de DAB-tuner wordt
meegeleverd
Verbindingskabel die met de DAB-tuner of CD-wisselaar wordt meegeleverd
JVC CD changer
CD-Wechsler von JVC
Changeur CD JVC
JVC CD-wisselaar
JVC DAB tuner
DAB-Tuner von JVC
Tuner DAB JVC
JVC DAB-tuner
or
oder
ou
JVC DAB tuner
DAB-Tuner von JVC
Tuner DAB JVC
JVC CD changer
CD-Wechsler von JVC
Changeur CD JVC
JVC CD-wisselaar
of
KS-LH60R
JVC DAB-tuner
KS-LH60R
CAUTION / VORSICHT / PRECAUTION / LET OP!:
• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is turned off.
• Bevor Sie den CD-Wechsler und/oder den DAB-Tuner anschließen, vergewissern Sie sich, daß das
Gerät ausgeschaltet ist.
• Avant de connecter le changeur CD et/ou le tuner DAB, s’assurer que l’unité est éteinte.
• Zorg ervoor dat de apparaat is uitgeschakeld alvorens u de en/of DAB-tuner CD-wisselaar aansluit.
• You can connect both components in series as illustrated above.
• Es ist möglich, beide Komponenten in einer Serienschaltung entsprechend der obigen Darstellung
anzuschließen.
• Vous pouvez connecter les deux appareils en série comme montré ci-dessus.
• Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten.
External Component / Externe Komponente / Appareil extérieur / Extern apparaat
Line Input Adapter KS-U57 (not supplied with this unit)
Line-Eingangsadapter KS-U57 (nicht mit diesem Gerät mitgeliefert)
Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet appareil)
Line Input Adapter KS-U57 (wordt niet bij dit apparaat geleverd)
See the INSTRUCTIONS (separate volume) for how to use the
external component with this unit.
Informationen zur Verwendung der externen Komponente mit diesem
Gerät finden Sie in den BEDIENUNGSANLEITUNG (separates
Dokument).
External component
Externe Komponente
Appareil extérieur
Extern apparaat
L
L
L
L
R
R
R
R
KS-LH60R
Référez-vous aux “MANUEL D’INSTRUCTIONS” (manuel séparé)
pour savoir comment utiliser l’appareil extérieur avec cet appareil.
Zie de GEBRUIKSAANWIJZING (apart boekje) voor details aangaande het
gebruik van het externe component met dit toestel.
Signal cord (not supplied with this unit)
Einzelleitung (nicht mit diesem Gerät mitgeliefert)
Cordon de signal (non fourni avec cet appareil)
Signaalkabel (wordt niet bij dit apparaat geleverd)
CD changer jack
Buchse für CD-Wechsler
Prise du changeur CD
Aansluiting voor CD-wisselaar
Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /
Verbinden met de stuurwiel-afstandsbediening
OE remote adapter (not supplied)
Radio-Lenkrad-Fernbedienungsadaption (nicht im
Lieferumfang enthalten)
Adaptateur pour télécommande au volant (non fourni)
Adapter voor stuurwiel-afstandsbediening (niet bijgeleverd)
If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.
To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR
ENTERTAINMENT dealer for details.
Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver steuern. Hierfür
ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht im Lieferumfang enthalten)
erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradiohändler.
Steering wheel remote input
Eingang für Lenkradfernbedienung
Entrée de la télécommande de volant
Ingang stuurwiel-afstandsbediening
Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la
télécommande. Pour le faire, un adaptateur pour télécommande au volant (non fourni) correspondant à votre voiture est
nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.
Indien uw auto een stuurwiel-afstandsbediening heeft, kunt u deze receiver met die afstandsbediening bedienen. Hiervoor heeft u
echter een JVC adapter voor stuurwiel-afstandsbediening (niet bijgeleverd) nodig die geschikt is voor uw auto. Raadpleeg uw JVC
car audio dealer voor details.
KS-LH60R
Steering wheel remote controller (equipped in the car)
Lenkradfernbedienung (im Fahrzeug installiert)
Télécommande de volant (installée dans la voiture)
Stuurwiel-afstandsbediening (in de auto)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|