JVC Car Stereo System XL FX258BK User Manual

COMPACT COMPONENT SYSTEM  
COMPACT DISC AUTOMATIC CHANGER  
XL-FZ158BK / XL-FZ258BK  
XL-FZ158BK  
XL-FZ158 COMPACT DISC AUTOMATIC CHANGER  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
DISC  
3
/
POWER  
1
2
4
5
OPEN/CLOSE  
EXCHANGE  
PHONES LEVEL  
MIN  
MAX  
PHONES  
5
DISC  
PLAY & EXCHANGE SYSTEM  
1
BIT  
P
E
M
D
D
CONVERTER  
'
XL-FZ258BK  
CONTINUE PROGRAM RAMDOM  
POWER  
OPEN/  
CLOSE  
DISC  
1
2
5
3
4
DISC SKIP EXCHANGE  
TRACK  
1
2
3
7
4
8
5
6
9
10  
+10  
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER  
REPEAT  
CALL  
CANCEL  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
4
1
¢
3
7
DISC  
3
POWER  
/
¡
8
1
2
4
5
'
RM-SX254U REMOTE CONTROL  
OPEN/CLOSE  
EXCHANGE  
PHONES LEVEL  
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5
DISC  
1
BIT  
P
E
M
D
D
CONVERTER  
PLAY & EXCHANGE SYSTEM  
9
10  
+10  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0234-001A  
[J]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings, Cautions and Others  
CAUTION  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
To reduce the risk of electrical shocks, fire, etc.:  
Do not remove screws, covers or cabinet.  
Do not expose this appliance to rain or  
moisture.  
1.  
2.  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK.  
DO NOT REMOVE COVER (OR BACK)  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
IMPORTANT FOR LASER PRODUCTS  
The lightning flash with arrowhead symbol,  
within an equilateral triangle is intended to  
alert the user to the presence of uninsulated  
"dangerous voltage" within the product's  
enclosure that may be of sufficient  
magnitude to constitute a risk of electric  
shock to persons.  
CLASS 1 LASER PRODUCT  
1.  
2.  
DANGER: Invisible laser radiation when  
open and interlock failed or defeated. Avoid  
direct exposure to beam.  
CAUTION: Do not open the top cover.  
There are no user serviceable parts inside  
the unit; leave all servicing to qualified  
service personnel.  
3.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
For U.S.A.  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
WARNING: TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR MOISTURE.  
Caution –– POWER switch!  
Disconnect the mains plug to shut the power off completely.  
The POWER switch in any position does not disconnect the  
mainsline.ThepowercanberemotecontrolledforXL-FZ258BK.  
G-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Names of buttons  
Main unit  
POWER button  
PLAY MODE: switching play mode  
(continue/program) button  
1/¡, 4/¢ SEARCH:  
skip,fastforward/backward  
buttons  
MEMORY button  
CALL: displaying RANDOM: random REPEAT button  
program contents  
button  
7STOP/CANCELbutton  
playback button  
DISC SKIP button  
Display window  
3 PLAY/8 PAUSE button  
COMPACT DISC AUTOMATIC CHANGER  
REPEAT  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
STANDBY  
RECEIVED  
DISC  
3
/
POWER  
1
2
4
5
OPEN/CLOSE  
EXCHANGE  
PHONES LEVEL  
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5
DISC  
1 BIT P E M D D CONVERTER  
9
10  
+10  
PLAY & EXCHANGE SYSTEM  
0 OPEN/CLOSE  
button  
Track buttons  
(XL-FZ258BK only)  
DISC buttons  
Disc tray  
PHONES: head-  
phones jack  
EXCHANGE: changing  
remote sensor  
(XL-FZ258BK only)  
discs button  
PHONES LEVEL control  
XL-FZ258BK:  
STANDBY/RECEIVED indicator:  
lights in standby mode and upon re-  
ception of the remote control signal  
XL-FZ158BK:  
STANDBY indicator  
DIGITAL OUT  
jack (optical)  
OUTPUT jacks  
AC IN  
DIGITAL OUT  
OPTICAL  
COMPU LINK - 3  
(SYNCHRO)  
OUTPUT  
RIGHT  
LEFT  
AC POWER CORD inlet  
COMPULINK-3(SYNCHRO)jacks  
Page 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control unit (for XL-FZ258BK)  
Remote control signal transmitter  
PROGRAM button  
RANDOM: random playback button  
POWER: POWER button  
CONTINUE PROGRAM RAMDOM  
POWER  
Turns on the unit or put it in STANDBY mode  
CONTINUE button  
OPEN/  
CLOSE  
DISC  
1
2
5
3
OPEN/CLOSE button  
DISC buttons  
4
DISC SKIP EXCHANGE  
EXCHANGE: changing discs button  
TRACK  
1
2
3
7
4
DISC SKIP button  
TRACK buttons  
5
6
8
+10  
CALL: displaying program contents button  
9
10  
REPEAT  
4
CALL  
CANCEL  
3
REPEAT button  
CANCEL button  
3: Play button  
¢
4/¢: skip/check buttons  
1
¡
8
7
7: Stop button  
1/¡: fast forward/backward  
'
buttons  
RM-SX254U REMOTE CONTROL  
8: Pause button  
Display window  
Disc number indicators  
Play mode indicators  
Notes on the disc number indicators  
÷
When the power is turned on or the disc tray is closed  
with the 0 OPEN/CLOSE button, the unit searches for  
loaded discsstarting fromthedisc tray1. Whennodisc  
isloaded, thedisc numberdisappearsfromthedisplay  
and unit goes on searching for the next tray.  
Whennodisc isloaded intheunit, “nodisc” appearson  
the display.  
In continue play mode, when playback of one disc is  
finished, the circle around the corresponding disc  
number disappears.  
PROGRAM  
RANDOM  
1
6
2
7
3
8
4
9
5
1
2
3
4
5
10  
15  
20  
EX-  
CHANGE  
DISC TRACK  
TOTAL TIME STEP  
11  
16  
12  
17  
13  
18  
14  
19  
REPEAT  
I
÷
÷
Music calender  
÷
÷
In program mode, circle appears around the disc  
number selected at that moment.  
When the EXCHANGE button is pressed, the indication  
of the disc numbers is reset to the original status and all  
the disc numbers (1-5) with their circle appear on the  
display.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING FOR THE FIRST TIME  
Connecting to the Digital  
Output Jack  
Installing the unit  
Best location  
It is possible to transmit a digital sound signal from this unit directly to  
a MD recorder,etc.  
Select a location which is level, dry and neither too cold nor too hot  
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty  
locations or any location subject to vibration.  
Notes  
÷
÷
Neverconnectthedigitaloutputcableexcepttothedigitalinputjack.  
An optical digital cord (optional) is required to make this connection.  
Refer to the instruction manual of the MD recorder, etc. for details.  
There is a protective cap on the DIGITAL OUT jack (optical) . When  
makingtheconnection, pulloffthiscapandstoreitcarefullyinasafe  
place. Should you undo the connection, replace the cap on the jack.  
If interference occurs  
If this unit is placed near a tuner or a radio receiver tuned to AM  
frequencies, interference may occur. If this happens, we recommend  
either that you move this unit as far away as possible from the tuner or  
receiver or briefly turn off the power to this unit.  
÷
Rear panel of this unit  
AC IN  
DIGITAL OUT  
OPTICAL  
COMPU LINK  
SYNCHRO  
-
3
OUTPUT  
RIGHT  
LEFT  
Connecting to the Analog  
Output Jacks  
MD recorder, etc.(optional)  
Optical digital cord (optional)  
Connecting to an amplifier or receiver allows you to listen to the sound  
from the speakers.  
Connect the OUTPUT jacks of this unit to the line input jacks of an  
amplifier or receiver with the supplied audio cord.  
OPTICAL  
DIGITAL  
OUT  
Notes  
÷
Never connect the OUTPUT jacks to the PHONO jacks of the  
amplifier or receiver. This may cause damage to the components.  
Make sure that the same channels are connected between this unit  
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.  
Do not connect the power plug until all connections are complete.  
Connect the plugs firmly. Loose connections may cause noise or  
malfunction.  
÷
÷
÷
Rear panel of this unit  
AC IN  
DIGITAL OUT  
OPTICAL  
COMPU LINK  
SYNCHRO  
-
3
OUTPUT  
RIGHT  
LEFT  
OUTPUT  
RIGHT  
LEFT  
Amplifier or receiver  
Audio cord  
Speaker unit  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplying the power  
To install the batteries in the remote  
control unit (for XL-FZ258BK)  
To connect the AC power cord of the  
main unit  
Before operating the remote control unit, install two batteries.  
The AC power cord is supplied separately and must be connected to  
the unit.  
1. Remove the rear cover of the remote control unit by pressing  
down and simultaneously pulling it backwards.  
Plug the AC power cord into the AC POWER CORD inlet of this unit and  
connect to the wall outlet after all connections are complete.  
Note  
When using the COMPU LINK Remote Control System, do not connect  
the power cord to the SWITCHED AC OUTLET of an amplifier or  
receiver.  
AC POWER CORD inlet  
Rear panel of this unit  
2. Install batteries. Be sure that the batteries are installed with  
correct polarity, (+) and (–).  
AC IN  
ª
·
DIGITAL OUT  
OPTICAL  
COMPU LINK  
(SYNCHRO)  
-
3
·
ª
OUTPUT  
RIGHT  
LEFT  
To the wall outlet  
Supplied AC power cord  
3. Attach the rear cover by sliding it back into position.  
Notes  
Incorrect use of batteries can cause corrosion or damage. Note the  
following points to lengthen battery life.  
÷
÷
÷
Install batteries observing the correct polarity, (+) and (–).  
Do not use new and old batteries simultaneously.  
Batteries with similar shapes may have different voltage ratings. Be  
sure to use the correct batteries.  
÷
÷
Remove batteries from the remote control unit if it will not be used  
for a long period of time.  
Do not expose batteries to heat or flame.  
Battery replacement  
Service life of batteries depends on the condition of use; standard life  
is about one year. When the batteries become weak, the operating  
distance of the remote control unit becomes short . If this happens,  
replace the batteries R6P(SUM-3)/AA(15F) with new ones.  
Note  
÷
The lower the temperature, the shorter the battery life.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING FOR THE FIRST TIME  
COMPU LINK connection  
JVC’s COMPU LINK Remote Control System provides unified control  
over system components connected with COMPU LINK. Connecting  
JVC audio components with the COMPU LINK jacks automatically  
controlsrelativeoperationsbetweencomponentsand facilitatesvarious  
operations. With the COMPU LINK connection to an amplifier or re-  
ceiver, you can operate XL-FZ258BK/XL-FZ158BK with the amplifier or  
receiver’s remote control unit. Synchronized recording is also available  
with this feature.  
Connecting the COMPU LINK cord  
The COMPU LINK-3 SYNCHRO jacks are used to output and input the  
control signal for the COMPU LINK remote control system.  
COMPU LINK-compatible products are provided with the jacks marked  
COMPU LINK-1, COMPU LINK-2 or COMPU LINK-3, referring to the  
COMPU LINK version. XL-FZ258BK/XL-FZ158BK is equipped with  
COMPU LINK-3. You can connect XL-FZ258BK/XL-FZ158BK also to a  
component with lower COMPU LINK versions. But, in that case, only the  
lower versions’ features will be available.  
Plug thesupplied COMPULINKcord intotheCOMPULINK-3SYNCHRO  
jack on the rear panel of XL-FZ258BK/XL-FZ158BK. Plug the other end  
into the COMPU LINK jack of the other component. If there are two  
COMPU LINK jacks, plug it into either of them.  
Connect to the COMPU LINK-3 (SYNCHRO) jack of another compo-  
nent eqipped with the Compu Link remote control system.  
Rear panel of this unit  
AC IN  
DIGITAL OUT  
OPTICAL  
COMPU LINK  
(SYNCHRO)  
-
3
OUTPUT  
RIGHT  
LEFT  
Supplied COMPU LINK cord  
Turntable  
Cassette deck  
Amplifier or receiver  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Basic functions for disc  
playback  
Turning on the power of this unit  
Remote control operation  
(for XL-FZ258BK)  
Press the POWER button to turn on this unit. The STANDBY  
indicator is turned off and the display is turned on.  
Point the remote control unit towards the remote sensor and operate it  
steadily and carefully. The remote control unit can be used within a  
rangeofabout7meters(23feet)fromtheremotesensor, and atangles  
of up to about 30 degrees.  
Main unit  
Remote control unit  
POWER  
POWER  
Playing a disc  
Press again to turn off the power and activate the standby mode. The  
STANDBY indicator is lit.  
Pressthe3PLAY/8PAUSEbuttononthemainunitorthe3button  
on the remote control unit.  
The power is automatically turned on also by;  
÷
÷
Pressing the 0 OPEN/CLOSE button.  
Main unit  
Remote control unit  
Pressing the 3 PLAY/8 PAUSE button on the main unit or the 3  
button on the remote control unit.  
PLAY/PAUSE  
3
6
Notes  
÷
A small amount of power (4 watts) is consumed even in the standby  
mode.  
÷
Toturnoffthepowercompletely,disconnectthepowercordfromthe  
wall outlet.  
The 3 indicator lights on the display and playback starts.  
Loading discs in the disc tray  
To stop playback temporarily, press the 3 PLAY/8 PAUSE button on  
the main unit or the 8 button on the remote control unit.  
The 8 indicator lights on the display and playback stops temporarily.  
To resume playback, press the 3 PLAY/8 PAUSE button on the main  
unit or the 3 button on the remote control unit.  
Use the 0 OPEN/CLOSE button to open and close the disc tray.  
Remote control unit  
Main unit  
OPEN/CLOSE  
OPEN/  
CLOSE  
Adjusting the headphones level  
Insert the headphones plug into the PHONES jack and turn the  
PHONES LEVEL control to adjust the volume level.  
0
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.  
Stopping playback  
2. Place discs on the disc tray according to the groove with their  
label side up.  
Press the 7 STOP/CANCEL button on the main unit or the7 button  
on the remote control unit.  
To tur÷n the disc tray and locates the disc tray to the just facing  
you,Press DISC SKIP button.  
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.  
Main unit  
Remote control unit  
STOP/CANCEL  
7
CAUTION  
7
When loading discs in the disc tray, be sure to put the discs  
according to the groove. Otherwise, the discs will be dam-  
aged when the disc tray is closed, and cannot be removed  
from the unit.  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Locating a point to start  
playback  
Specifying a desired disc  
Skipping to a desired disc  
Use the DISC buttons (1-5).  
Use the DISC SKIP button.  
Main unit  
Remote control unit  
DISC SKIP  
DISC SKIP  
Main unit  
1
Remote control unit  
1
2
5
3
DISC  
DISC  
3
2
4
5
4
Each time the DISC SKIP button is pressed, the selected disc number  
switches from 1 to 5, then back to 1.  
To select a disc, press the desired disc number (1-5). The unit  
searches for the selected disc and playback starts automatically.  
Skipping to a desired track  
Note  
Use the 4/¢ buttons.  
If no disc is loaded in the selected disc tray, the indicator of that disc is  
turnedoffwithinabout4secondsandthenplaybackstartsfromthenext  
disc.  
Main unit  
Remote control unit  
1 SEARCH  
¡
4
¢
4
¢
Specifying a desired track  
(for XL-FZ258BK)  
To specify the desired track number, use the track buttons (1-10,  
+10).  
To skip back to the beginning of the track being played, tap the 4  
button. Whenthebeginning ofthetrackisreached, tapping thisbutton  
again skips to the previous track.  
Remote control unit  
Main unit  
To skip to the next track, tap the ¢ button.  
When using the 4/¢ SEARCH buttons on the main unit, tap them  
until the desired track appears.  
TRACK 1  
2
6
3
4
1
2
7
3
8
4
9
5
5
9
7
8
6
10  
+10  
10  
+10  
Searching for a desired section  
Keep the 1/¡ button pressed during playback.  
The unit searches for the selected track and playback starts automati-  
cally.  
Whenselecting tracknumber10orless,pressthecorresponding track  
button. When selecting track number 11 or above, use the [+10]  
button.  
Main unit  
Remote control unit  
1 SEARCH  
¡
1
¡
4
¢
Example: To select track number 12, press [+10] and then [2].  
To select track number 25, press [+10] twice and then [5].  
To select track number 30, press [+10] twice and then [10].  
Playback advances or reverses rapidly.  
Note  
Whilethe1buttoniskeptpressed,playbackrapidlyreversestoward  
the beginning of the track. While the ¡ button is kept pressed,  
playback rapidly advances toward the end of the track. When the  
desired section is reached, release the button. The player resumes  
normal playback from that point.  
If the selected track number does not exist on the selected disc,  
playback starts from the first track on that disc.  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
VARIOUS PLAYBACK PATTERNS  
Playing tracks in a order  
of track/disc number  
Changing discs during  
playback  
Duringplaybackofadisc,youcanchangeotherdiscsinthedisc  
tray without stopping playback.  
Youcancontinuouslyplayalltheloadeddiscs,startingfromany  
track on any disc.  
3 PLAY/  
4/¢ 8 PAUSE  
Press the EXCHANGE button. The disc tray opens and you can  
change the discs inside.  
PLAY MODE  
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
Main unit  
Remote control unit  
EXCHANGE  
DISC  
3
/
POWER  
1
2
4
5
EXCHANGE  
OPEN/CLOSE  
EXCHANGE  
PHONES LEVEL  
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5
DISC  
1
BIT  
P
E
M
D
D
CONVERTER  
9
10  
+10  
PLAY  
&
EXCHANGE SYSTEM  
DISC  
Track buttons  
To change the discs loaded in the far end of the disc tray, press the  
DISC SKIP button to make the disc tray rotate.  
After changing the discs, press the EXCHANGE button again to close  
the disc tray.  
1. Press the PLAY MODE button on the main unit or the CON-  
TINUE button on the remote control unit so that both the  
PROGRAM and RANDOM indicators are turned off on the  
display.  
It is also possible to change the discs during program playback or  
random playback, following the above procedure.  
When you want to play from a desired disc or track, go to step 3.  
Note  
2. Press the 3 PLAY/8 PAUSE button on the main unit or the 3  
button on the remote control unit to start playback.  
Playback starts from the previously selected disc.  
If the disc tray is not closed, pressing the 3 PLAY/8 PAUSE button  
closes the disc tray and then starts playback.  
When the disc tray is opened by pressing the EXCHANGE button, it is  
not possible to close it by pushing it back with hand. Press the  
EXCHANGE button again to close the tray.  
The following display appears.  
Track number being played.  
1
6
2
7
3
8
4
9
5
4
10  
DISC TRACK  
TIME  
11  
Shows the disc number being played.  
3. Use the DISC button to select the disc number which contains  
the first track to be played.  
When you want to play from the first track on the selected disc, it  
is not necessary to select the track number.  
4. Select the track number with the 4/¢ buttons or, for XL-  
F254BK, the track buttons.  
The selected track number appears on the display and playback  
starts from the selected track automatically.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS PLAYBACK PATTERNS  
Playing tracks in a  
desired order  
÷
÷
You can skip to a desired program step with the 4/¢ button.  
If you have programmed all disc (1~5) as “AL”,pressing ¢ (or  
4) will skip to the next (or previous) disc.  
When the DISC SKIP button is pressed during program play, the  
playback skips to the next programmed disc.  
You can play only the favorite tracks in any desired order.  
3 PLAY/  
STOP/CANCEL 8 PAUSE  
PLAY MODE  
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
DISC  
3
/
POWER  
1
2
4
5
To check the program contents  
PHONES LEVEL  
OPEN/CLOSE  
EXCHANGE  
Press the CALL button during stop mode. Each time the CALL button  
is pressed, the program contents are displayed in the programmed  
order.  
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5 DISC  
EXCHANGE SYSTEM  
1
BIT  
P
E
M
D
D
CONVERTER  
9
10  
+10  
PLAY  
&
÷
When the unit is in program play mode, press the 7 button to enter  
stop mode and then operate the CALL button.  
Track buttons  
To modify the program contents  
Press the CALL button until the display shows the program step to be  
corrected. Enter the new disc number and/or track number referring  
to steps 2 and 3 above.  
1. In stop mode, press the PLAY MODE button on the main unit  
or the PROGRAM button on the remote control unit so that the  
PROGRAM indicator lights on the display.  
To delete a program step, press the CALL button until the display  
shows the program step to be deleted and then press the 7 STOP/  
CANCEL button on the main unit or the CANCEL button on the remote  
control unit. You can also delete a displayed program step during  
programming.  
2. Select the disc which contains the track to be programmed  
with the DISC button.  
“AL” (all tracks) appears on the display.  
÷
When the unit is in program play mode, press the 7 button to enter  
To program the entire disc  
stop mode and then delete the program step.  
Skip step 3 below. When the track number is not specified after  
selecting the disc number, all tracks on the selected disc are  
programmed.  
To add discs/tracks to the program during program play-  
back  
3. ForXL-FZ258BK,selectthetracknumberbypressingthetrack  
buttons.ForXL-FZ158BK,selectthetracknumberbypressing  
the 4/¢ SEARCH button and then the MEMORY button.  
Refer to “Specifying a desired track” on page 8 for entering the  
track number. For XL-FZ158BK, press the MEMORY button with  
the desired track number shown on the display.  
Specify the disc number by pressing the DISC button and, with XL-  
FZ258BK, the track number by pressing the track buttons.  
The specified disc/track is added to the end of the program being  
played back.  
÷
For XL-FZ158BK, only the disc number can be specified and the  
entire disc is added to the program. For this operation, it is not  
possible to utilize the 4/¢ SEARCH buttons.  
When the selected track number is programmed, the following  
display appears.  
To exit program mode  
Display shows the disc  
Press the PLAY MODE or RANDOM button on the main unit, or the  
CONTINUE or RANDOM button on the remote control unit, and the  
program mode is cancelled. However, the program contents are not  
erased and, whenever the program mode is selected, you can play the  
tracks in programmed order.  
number and the track  
number selected for step 1.  
PROGRAM  
1
2
4
5
9
DISC TRACK  
STEP  
÷
÷
For XL-FZ258BK , you can also use the 4/¢ SEARCH button  
then the MEMORY button to select a track number.  
If you want to cancel the displayed program step, press the 7  
STOP/CANCEL button on the main unit or the CANCEL button on  
the remote control unit and then enter the new disc number and/  
or track number.  
To clear the program  
In stop mode, press the 7 STOP/CANCEL button on the main unit  
repeatedly. The program contents will be cleared step by step.  
To clear the entire program, press the 0 OPEN/CLOSE button on the  
main unit in stop mode. The program contents will be entirely cleared,  
however, the program mode is not cancelled.  
4. Repeat steps 2 and 3 for other tracks and/or discs to be  
programmed.  
You can program up to 32 steps.  
5. Startplaybackbypressingthe3 PLAY/8 PAUSEbuttononthe  
main unit or the 3 button on the remote control unit.  
The programmed tracks and/or discs are played in the pro-  
grammed order.  
Page 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing tracks in a  
random order  
Playing repeatedly  
Youcanselectandplaytracksinrandomorderfromallthediscs  
loaded in the unit.  
Selections are made so that each track is played only once.  
You can repeatedly play all discs or one track.  
It is also possible to utilize this function in combination with  
random/program playback function.  
RANDOM  
3 PLAY/8 PAUSE  
REPEAT  
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER  
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
DISC  
3
/
POWER  
XL-FZ258 COMPACT DISC AUTOMATIC CHANGER  
1
2
4
5
DISC SKIP  
SEARCH  
STOP/CANCEL  
PLAY/PAUSE  
CALL  
MEMORY  
RANDOM  
PLAY MODE  
REPEAT  
STANDBY  
RECEIVED  
DISC  
3
/
POWER  
1
2
4
5
PHONES LEVEL  
OPEN/CLOSE  
EXCHANGE  
PHONES LEVEL  
OPEN/CLOSE  
EXCHANGE  
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5 DISC  
EXCHANGE SYSTEM  
1
BIT  
P
E
M
D
D
CONVERTER  
9
10  
+10  
PLAY  
&
MIN  
MAX  
1
6
2
7
3
8
4
5
PHONES  
5 DISC  
EXCHANGE SYSTEM  
1
BIT  
P
E
M
D
D
CONVERTER  
9
10  
+10  
PLAY  
&
1. In stop mode, press the RANDOM button so that the RANDOM  
indicator lights on the display.  
Repeating all discs  
Press the REPEAT button so that the REPEAT indicator lights on  
the display.  
2. Press the 3 PLAY/8 PAUSE button on the main unit or the 3  
button on the remote control unit to start playback.  
All discs loaded in the unit are played repeatedly.  
In program mode, the program contents are played repeatedly.  
÷
To skip to the track to be played next, press the ¢ button.  
To cancel random playback  
In stop mode, press the PLAY MODE button on the main unit or the  
CONTINUE or PROGRAM button on the remote control unit. The  
RANDOM indicator goes out and the random playback is cancelled.  
Repeating one track  
Press the REPEAT button so that the REPEAT 1 indicator lights on  
the display.  
The displayed track is played repeatedly.  
To cancel repeat mode  
Press the REPEAT button so that both the REPEAT and REPEAT 1  
indicators go out.  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATIONS  
COMPU LINK remote  
control system  
The COMPU LINK Remote Control System controls relative  
operations between components automatically and facilitates  
various operations.  
Automatic source selection  
When the supplied COMPU LINK cord is utilized to connect this unit to  
others equipped with COMPU LINK jacks, switching-in of each system  
component can be performed with a single touch on the source  
selector button located on a JVC amplifier or receiver.  
Whenselectioniscarried outinthismanner, thecorresponding unitwill  
automatically start operation.  
This is a system originated and developed by JVC for facilitating  
various system operations.  
Upon pressing of the play button, the source selector of the amplifier  
or receiver changes automatically. When a new unit is switched in, the  
previously selected component stops operation within five seconds.  
The following is a brief explanation of this system:  
Synchronized recording  
Synchronized recording refers to the process in which a JVC cassette  
deck starts recording, synchronized with this unit. Synchronized  
recording is carried out as follows:  
1. Set the cassette deck to the recording pause mode in accordance  
with its instructions.  
2. To record only certain tracks, program the tracks in any order, as  
desired.  
3. Press the 3 PLAY/8 PAUSE button on the front panel of this unit.  
The cassette deck automatically starts recording, synchronized  
with this unit.  
Notes  
÷
÷
÷
÷
Synchronized recording stops automatically when this unit stops  
playback.  
To cancel synchronized recording, press the stop button of this unit  
or the cassette deck.  
To properly operate the synchronized recording, the buttons/con-  
trols other than POWER, 7 STOP and OPEN do not function.  
If the recording pause mode is set on the cassette deck by pressing  
the 8 PAUSE button after pressing the REC and 3 PLAY buttons  
simultaneously, synchronized recording is not possible. For details,  
refer to the instructions for the cassette deck.  
Automatic power on/off function  
This function is to control the power on/off of the receiver/amplifier or  
this unit respectively as the following.  
÷
÷
When this unit enters playback mode, the power of the receiver or  
amplifier is turned on.  
When the source selector of the receiver/amplifier is set to CD  
function mode, the power of this unit is turned on.  
Notes  
÷
Abnormaloperationmayresultifthepowersupplyofthecomponent(s)  
is interrupted. If this happens, you must start over again.  
Ensure that the COMPU LINK jacks of the each component are  
connected with the supplied COMPU LINK cord. Also, be sure to  
fully read the instructions for each component.  
÷
÷
When the power of the amplifier or receiver is switched off, this unit  
is also turned off automatically.  
Page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATIONS  
Care and handling  
Maintenance of discs  
How to handle CDs  
When there are fingerprints or other dirt adhering to a disc, wipe the  
disc with a soft, dry cloth with a movement going from the center  
outwards.  
If difficult to clean, wipe the disc with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
When handling compact discs, do not touch the surface of the disc (re-  
flective silver side — the side without the label).  
Since compact discs are made of plastic, they are easily damaged. If  
the disc gets dirty, dusty, scratched or warped, the sound will not be  
picked up correctly and, in addition, such discs may cause the CD  
player to malfunction.  
Even on label side  
Do not damage the label side, stick paper to or use any adhesive on  
the surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled one on  
top of another without their protective cases, they can be damaged.  
Do not put discs in any location where they can be exposed to direct  
sunlight, or in any place where humidity or temperature is high. Avoid  
leaving discs in your car!  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATIONS  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.  
Symptom  
Possible cause  
Remedy  
The unit is not operative.  
Power plug is disconnected from the AC  
outlet.  
Connect the plug to the AC outlet.  
Discs are not loaded.  
Load discs in the disc tray.  
Playback is not possible.  
Disc is inserted upside down.  
Load the disc with its label-side up in the  
disc tray.  
Disc is not loaded in the correct position.  
Moisture is condensed inside the unit.  
Load the disc according to the groove of  
the disc tray.  
Leave the unit turned on until the mois-  
ture evaporates.  
No sound from the headphones.  
Headphones volume is set to the minimum  
level.  
Adjust the volume with the PHONES  
LEVEL control.  
The reproduced sound includes noise.  
Disc is dirty.  
Wipe off the disc surface with a soft  
cloth.  
Disc is warped.  
Replace the disc with a new one.  
Replace the disc with a new one.  
Replace both batteries.  
The sound is intermittent.  
Disc is scratched.  
Batteries are exhausted.  
The remote control unit does not function.  
(for XL-FZ258BK)  
There is an obstacle between remote control  
unit and the remote sensor of the main unit.  
Remove the obstacle.  
Direct sunlight shines on the remote sensor  
of the main unit.  
Shade the unit from the direct sunlight.  
Specifications  
General  
Accessories  
Format:  
Compact disc digital audio  
AC power cord .......................................................................... 1  
Audio cord ................................................................................. 1  
COMPU LINK cord .................................................................... 1  
Remote control unit (RM-SX254U) (XL-FZ258BK only) ............. 1  
Battery R6P(SUM-3)/AA(15F) (XL-FZ258BK only) ..................... 2  
Signal detection system: Non-contact optical detection  
CD capacity:  
5 discs  
44.1 kHz  
Sampling frequency:  
Power requirements  
U.S.A.  
Power consumption:  
Dimensions (W x H x D):  
AC 120 V  
10 watts  
, 60 Hz  
435 x 128 x 386 mm  
Design and specifications subject to change without notice.  
(17-3/16 x 5-1/16 x 15-1/4 inches)  
5.1 kg (11.3 lbs)  
Mass:  
Audio performance  
Frequency response:  
Dynamic range:  
2 Hz to 20,000 Hz (±1 dB)  
More than 98.0 dB (at 1 kHz)  
More than 107.0 dB  
Signal to noise ratio:  
Total harmonic distortion: Less than 0.0022% (at 1 kHz)  
Channel separation:  
Wow and flutter:  
Output level:  
More than 94.0 dB (at 1 kHz)  
Less than measurable limit  
2.0 Vrms (at full scale)  
Page 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We would like to thank you for purchasing one of our JVC  
products.  
Before connecting this unit to the wall outlet, please read  
the instructions carefully to ensure that you obtain the  
best possible performance.  
Table of contents  
INTRODUCTION................................................ 1  
Precautions .................................................................1  
About this manual .......................................................1  
Names of buttons ........................................................2  
If you have any questions, please consult your JVC  
dealer.  
BEFORE USING FOR THE FIRST TIME .......... 4  
Installing the unit .........................................................4  
Connecting to the analog output jacks .......................4  
Connecting to the digital output jack ..........................4  
Supplying the power .................................................. 5  
To connect the AC power cord of the main unit ............ 5  
To install the batteries in the remote control unit  
(for XL-FZ258BK) ........................................................... 5  
COMPU LINK connection...................................................... 6  
BASIC OPERATIONS ....................................... 7  
Basic functions for disc playback ...............................7  
Turning on the power of this unit .................................... 7  
Loading discs in the disc tray ........................................ 7  
Remote control operation (for XL-FZ258BK) .................. 7  
Playing a disc ................................................................. 7  
Stopping playback ......................................................... 7  
Locating a point to start playback ..............................8  
Skipping to a desired disc ............................................. 8  
Skipping to a desired track ............................................ 8  
Searching for a desired section ..................................... 8  
Specifying a desired disc .............................................. 8  
Specifying a desired track (for XL-FZ258BK) ................ 8  
Changing discs during playback................................9  
VARIOUS PLAYBACK PATTERNS ................. 9  
Playing tracks in a order of track/disc number ...........9  
Playing tracks in a desired order .............................. 10  
Playing tracks in a random order.............................. 11  
Playing repeatedly .................................................... 11  
Repeating all discs....................................................... 11  
Repeating one track ..................................................... 11  
GENERAL INFORMATIONS ........................... 12  
COMPU LINK remote control system ....................... 12  
Care and handling .................................................... 13  
Troubleshooting ........................................................ 14  
Specifications............................................................ 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE : 1-800-537-5722  
Dear customer:  
In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair  
is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental  
United States, Call 1-800-537-5722 for your authorized servicer. Remember to retain you Bill of Sale for Warranty Service.  
—JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
FACTORY SERVICE CENTER LOCATIONS  
107 Little Falls Road  
Fairfield, NJ 07004-2105  
(973) 808-9279  
1500 Lakes Parkway  
Lawrenceville, GA 30243-5857  
(770) 339-2522  
705 Enterprise Street  
Aurora, IL 60504-8149  
(630) 851-7855  
5665 Corporate Avenue  
Cypress, CA 90630-0024  
(714) 229-8011  
2969 Mapunapuna Place  
Honolulu, HI 96819-2040  
(808) 833-5828  
10700 Hammerly, Suite 110  
Houston, TX 77043  
(713) 935-9331  
13 Cummings Park  
Woburn, MA 01801  
(781) 376-9100  
8192 State Road 84  
Davie, FL 33324  
(954) 472-1960  
890 Dubuque Avenue  
South San Francisco, CA 94080-1804  
(650) 871-2666  
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of  
the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The  
JVC service and engineering organization stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
If you ship the product • • •  
Don’t service it yourself.  
Pack your JVC unit in the original carton or one of equivalent  
size and strength. Enclose, with the unit, a letter stating the  
problem or symptom that exists and also a copy of the  
CAUTION  
receiptorbillofsaleyoureceivedwhenyoupurchasedyour  
JVC unit. Print your home return address on the outside  
and the inside of the carton. Send to the appropriate JVC  
Factory Service Center as listed above.  
To prevent electrical shock, do not open the cabinet. No user  
serviceable parts inside.  
Refer servicing to qualified service personnel.  
ACCESSORIES  
To purchase accessories for your JVC product, you may contact your local JVC Dealer.  
Or from the 48 Continental United States call toll free : 800-882-2345  
BT-51001-3  
(1098)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY AUDIO-1  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL  
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail  
purchase for the period as shown below. (“The Warranty Period.)  
PARTS  
LABOR  
1YR  
1YR  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN  
COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such  
repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.  
Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be  
brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and  
above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized  
service center, please call toll free: (800)537-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of  
your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location  
of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to  
render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has  
been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase;  
7. Accessories;  
8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase);  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARCHANTABILITY, IS  
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO  
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF  
THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied  
warranty last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you  
may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF  
REFURBISHED PRO DUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.:  
Serial No.:  
Purchase date:  
Name of dealer:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
J
C
0199AOMOKGJEM  
V
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

IOGear Computer Hardware GUF320 User Manual
JL Audio Car Amplifier J22501 User Manual
John Lewis Ventilation Hood JLBIHD908 User Manual
JVC Camcorder CB A270 User Manual
JVC DVR LPT0923 001A User Manual
Kairak Refrigerator KRES User Manual
Kawasaki Grinder 691202 User Manual
Kenmore Refrigerator 795775626 User Manual
Kensington Power Supply Notebook AC DC Power Adapter Portable 120 Watt AC DC Power Supply User Manual
Konica Minolta GPS Receiver NS NAV02R GPS User Manual