V.NETWOKS MULTI CAMERA BROWSER
INSTRUCTIONS
VN-S200U/S100U
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
This instruction book is made from
100% recycled paper.
Model No.
Serial No.
VN-S200U/S100U
SS961541-002
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This application entitled "MULTI CAMERA BROWSER" (VN-S100U, VN-S200U)
is used to display images from multiple V.NETWORKS units on the operator
terminal equipment.
(The V.NETWORKS series products include the VN-C1U, VN-C2U and VN-
C3U. Verify that your V.NETWORKS unit is the VN-C1U, VN-C2U or VN-C3U.
Operating Environment
The following environment is required to run this application.
Basic software:
Microsoft Windows 95, 98 or NT (Service Pack 4 or higher)
2000(Service Pack 1 or higher)
Computer:
A PC incorporating Pentium 333 MHz or faster CPU.
(Pentium 500 MHz or more is recommended.)
Memory
Available memory space of 64 MB or more.
(128 MB or more is recommended.)
Hard disk free capacity (before installation)
10 MB or more (Free space of at least 50 MB is required for recording.)
Disk device
CD-ROM drive is indispensable.
Display, video card
Resolution 640 480 or better. High Color (16-bit) display is indispensable.
x
(Resolution of 1024x768 or better and True Color (32-bit) display are
recommended)
Other
Microsoft Internet Explorer 4.01 Service Pack 1 or higher indispensable.
(Internet Explorer 5.0 or more is recommended.)
The MULTI CAMERA BROWSER is compatible only with JVC camera models
VN-C1U, VN-C2U and VM-C3U.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Functions
1. Multi-browsing
•
Simultaneous connections to multiple V.NETWORKS units.
Simultaneous browsing of up to 16 units (With the VN-S100U, up to 4
•
cameras can be browsed.)
2. Recording
•
The displayed V.NETWORKS images can be saved as successive still
images.
Variable saving interval.
Timer recording. (This function is for exclusive use with the VN-S200U.)
•
•
3. PLAY BACK
•
Playback of recording by simply specifying the time and date.
Simultaneous display of saved time.
•
4. Pop-up
•
Ctrl + double clicking on a window showing a V.NETWORKS image, displays
a magnified image in another window.
5. Snapshot
•
Saving of still images in desired folders (up to 16 images).
6. Auto dial-up
•
When a V.NETWORKS unit on WAN is registered, it can be connected by
automatic dial-up.
Overall View of MULTI CAMERA BROWSER Screen
Figure 1
NOTE) Fig. 1 shows the overall view with the VN-S200U.
With the VN-S100U, up to four images can be displayed in the View window.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Function List
Menu Item Pull-Down Item
Outline
File
New Work space
Creates a new work space.
Open Work space
Save Work space
Save Work space as
Close Work space
(History)
Opens an existing work space.
Saves a work space by overwriting.
Saves a work space by assigning a new name.
Close the currently open work space.
Opens the last used workspace.
Exits from the browser.
Exit
View
Controller
Toggles the display of the V.NETWORKS
controller on and off.
REC/Play Controller
Toggles the display of the recording,
playback and snapshot controller.
Toggles the display of the tool tip.
Show or hide the Management Explorer.
Creates a new View window.
Opens an existing View window.
Deletes the registration of a View window.
Saves the images in the View window as
successive images.
Tool Tip
Management Explorer
New View Window
Add View Window
Delete View Window
Start Recording
View
window
Stop Recording
Timer Recording
Stops recording.
Starts and stops recording automatically
at the set time of day.
Start Playback
Stop Playback
Properties
Plays the recorded images successively.
Stops Playback.
Sets up the View window.
Accent Frame
Sets up Accent Frame.
V.Networks Register V.Networks
Delete V.Networks
Properties
Registers a V.NETWORKS in the View window.
Deletes a V.NETWORKS from the View window.
Sets up a V.NETWORKS.
Position Memory
Sets up the position memory.
Sets up Alarm.
Arranges windows in a tile in the order
they were registered.
Alarm
Window
Alarm Setting
Arrange view
Window
by
Registration
Arranges windows in a tile in the
alphabetical order of names
by Name
Align With Grid
Show All
Aligns the windows with grid automatically.
Shows all View windows.
Hide All
Hides all View windows.
(Window List)
About
Checks the View windows being displayed.
Shows the browser version.
Help
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Construction of MULTI CAMERA BROWSER
Work space (*.vnw)
View window No.1
V.NETWORKS No.1
V.NETWORKS No.2
V.NETWORKS No.16
View window No.2
View window No.16
V.NETWORKS No.17
V.NETWORKS No.18
V.NETWORKS No.32
V.NETWORKS No.241
V.NETWORKS No.242
V.NETWORKS No.256
*The figure above shows the construction of the VN-S200U.
With the VN-S100U, the following restrictions are applied.
•
Number of View windows . . . . . . . . . . . . . . 4
•
Number of cameras per View windows . . . . 4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
This section describes the installation procedure of the application.
1. Insert the "VN_S200U" CD-ROM in the CD-ROM drive (* with the VN-S200U).
2. Double-click \Jvc\setup.exe of the CD-ROM in order to run it.
In advance, set the IP addresses of the VN-C1U/C2U/C3U cameras to
be used sing the provided setup tool. For the operating procedure of
the setup tool, refer to the cameras' instruction manuals.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Perform operations in accordance with the displayed instructions.
Click here to change the installation
destination.
* Enter the "SERIAL NUMBER"
shown on the sticker attached to
the back of the CD-ROM case.
Installation has completed
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING V.NETWORKS IMAGES
This section describes the operations procedure for displaying V.NETWORKS
images on your PC.
1. Start the Multi Camera Browser.
1-1. From "Start" on the taskbar, select [Programs] - [V.NETWORKS] - [vn-
s200u Multi Camera Browser] to start it.
2. Create a workspace
2-1. On the menu bar, select [File] - [New Workspace] to create a new
workspace.
3. Register V.NETWORKS in the workspace
3-1. On the menu bar, select [V.Networks] - [Add V.Networks]
3-2. Enter the V.NETWORKS name, IP address, connection mode and
connection destination(only when 'WAN' is selected as the connection
mode).
LAN : Connected through LAN
WAN : Dial-up connection
When WAN is used, it is necessary to
set the connection destination in
advance. For the procedure, refer to the
Windows manual and other documents.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Create a View window
4-1. On the menu bar, select [View Window] - [New View Window].
4-2. When a window is displayed, enter the View window name in it.
4-3. On the "View Window Setup" item, select the View window where you
want to add the V.NETWORKS and click the <Add> button.
4-4. When the "Add V.Networks" window is displayed, click the displayed
contents in order to display all the V.NETWORKS units registered for
the workspace. Select the V.NETWORKS to be added to the View
window and click the <OK> button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5. Set the View window switching interval and image size, then click the
<OK> button.
* Multiple View windows can be registered in the workspace by repeating steps 4-1
to 4-5 for each View window.
Also, multiple V.Networks can be registered for a single View window by repeating
steps 4-3 and 4-4 for each V.Networks.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE V.NETWORKS
This section describes how to pan, tilt or zoom the connected V.NETWORKS
using the controller and set it to the condition in which viewing is required.
Procedure
1. On the menu bar, select [View] - [Controller].
2. Among the currently displayed View windows, click the one where the
V.NETWORKS to be controlled is registered in order to make it active.
3. If more than one V.NETWORKS has been registered in the View window,
interrupt the image switching by clicking the [Pause Switching] button
on the controller.
4. Click the pull-down menu of the controller to select the V.NETWORKS to
be controlled.
Pause Switching
View window name
Lets the image switching
operation pause temporarily
Name of the controlled View window
V.NETWORKS name
Select the V.NETWORKS
to be controlled
PAN/TILT
Shows the current
pan/tilt position
LENS
PAN/TILT buttons
Controls the zooming,
focusing and iris of the lens.
Control the panning and tilting of
the selected V.NETWORKS.
Position memory
Press one of the buttons to point to a preset position.
When the connection destination is the VN-C1U : Pan/tilt/zoom/position memory operations are
not available.
When the connection destination is the VN-C2U : Zooming operation and position memories
7 to 10 are not available.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Panning/tilting operation
Click one of the eight arrow buttons to pan/tilt the V.NETWORKS in the
indicated direction by the angle set in "Angle Step". (The angle is freely
variable in steps between 1˚and 40˚.)
Lens operation
In the pull-down menu in the LENS field, select the item to be controlled
from IRIS, ZOOM and FOCUS.
•
When the Zoom operation is selected, the "Fast" check-box is displayed.
Checking this box enables zooming in and out at high speed.
When the Focus operation is selected, the "Auto" check-box is displayed,
•
Checking this box enables auto focusing.
When the Iris operation is selected, the "Auto" check-box is displayed.
•
Checking this box enables auto iris control.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING V.NETWORKS IMAGES
The recording function saves images displayed in the currently active window
onto a disk.
•
•
Images are recorded on a per-window basis. The recording file is stored in
the folder specified by "Save in" under [View Window] - [Properties] -
[Details]. The default folder is the folder having the same name as the View
window name under the folder where the application is installed.
i.e.: (Application installation folder) \ (View window name).
When recording has completed, a file named *******.rec is created on a disk.
A new file per day is automatically created if the recording carries over into
next day.
•
•
•
For detailed recording setup,see "5. Recording setup" in "CHANGING THE
VIEW WINDOW SETUP" on page 29.
Procedure
1. Among the currently displayed View windows, click the View window to
be recorded to make it active.
2. Ensure that the title bar of the Record/Play Controller shows the name of
the View window to be recorded, then click the Record button. (If the
Record/Play Controller is not displayed, select [View] - [REC/Play
Controller] to display it.)
3. Recording starts at the same time as the characters "REC" are displayed
on the top right of the View window.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING RECORDING FILES
•
•
Recording files are saved with file names "<recording start time>.rec".
To delete recording files, open the Explorer and delete files "*.rec".
* A recording file can also be deleted by clicking the [Delete] button
in step 2 of the Procedure on page 17.
CAUTION !!
As a recording file cannot be restored once it has been deleted,
make sure that the file is unnecessary by checking the contents
before deletion. JVC cannot assume liabilities for the loss of recording
files.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
(*This function is for exclusive use with the VN-S200U.)
The timer recording function starts and stops recording automatically at the
set time of day.
For detailed recording setup, see "5. Recording setup" in "CHANGING THE
VIEW WINDOW SETUP" on page 29.
•
•
Procedure
1. Select [View Window] - [Timer Recording].
2. The [Timer Recording] window appears.
3. In the View window column, select the View window you want to set
timer recording.
4. To set timer recording, check one of the [Timer 1 to 5] check boxes and set
the [Recording start time], [Recording end time], and [Daily] or [Weekly].
(When [Weekly] is set, it is also required to set the days of the week from
[Sun] to [Sat].)
5. After checking that the set data is correct, click <OK>.
CAUTION !!
•
To enable timer recording, the MULTI CAMERA BROWSER (this application)
should be running at the timer start time.
•
A timer recording setup over the date cannot carry out.
•
Each setting time of timer recording cannot carry out a duplication setup.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING RECORDING IMAGES
(*VN-S100U : 1 image play back, VN-S200U : up to 4 images play back
simultaneously.)
This section describes how to play back a recorded file.
•
Procedure (* The following procedure is applicable to 2 screen playback.)
1. Click the Play button of the Record/Play Controller. When a window as
shown below appears, select the size and number of played windows.
"Standard"
:
Searches the files for play back without affecting the images on
View window. The refrash rate of images on View window may be
slow down.
"High Speed" : Search function takes precedence of images View window.
*Note: The images on View window may not be refreshed during
"High Speed" search.
2. When the Select Image window appears, select the View window to be
played and the time.
No. of View window
Select View window for play back or files
containing recordered images.
Select the file for play back.
*One file at once can be selected. Recorded files
with which alarm occurred during recording are
displayed in red.
Display the list of alarms in the recorded file.
Delete the recorded file selected in the list box.
If the file includes images of multiple
V.NETWORKS, it is also possible to select one
of them.
Set up play back period of recorded images.
3. Click [OK] to display the Playback window.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other
1.The PlayBack Controller provides the "image movement amount
specification" facility.
This function enables to set up PlayBack step per 1 left click.
Enter a value between 1 and 3600.
2.The following box is displayed when [Alarm List] is clicked.
This list shows the alarms occurred in the selected recorded file and will
help specify the played time period according to the alarm occurrence
situation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SNAPSHOT RECORDING
The snapshot function saves the currently displayed View window as a still
image in a file.
Up to 16 images can be acquired at once.
•
•
Procedure
1. Click the View window where the images that you want to include as
snapshots are displayed.
2. Click the Snapshot button of the Record/Play Controller. If the Record/
Play Controller is not displayed, select [View] - [REC/Play Controller] to
display it.
*A check mark is displayed to the right of "REC/Play Controller" while the
Record/Play Controller is displayed.
3. Click the Snapshot button to display the still image of the currently active
View window in another window (Snapshot window).
4. In the Snapshot window, select [File] - [Save]. The [Save] dialog box
appears and the still image can be saved in a desired disk.
CAUTION !!
The saved snapshot files cannot be viewed with the MULTI CAMERA
BROWSER appropriate image viewing software.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MANAGEMENT EXPLORER
This window has a similar appearance to Windows Explorer and facilitates
the window management operations such as changing the settings of the
[View window] and [V.Networks] windows as well as enabling their addition
and deletion.
•
1. Displaying the Management Explorer
On the menu bar, select [View] - [Management Explorer].
2. Registering V.Networks
2-1.Right click the root item (item at the top) or Group in the V.Networks list
(on the right of the Management Explorer) and select [New] -
[V.Networks].
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2.When a box as shown below appears, perform registration of V.Networks
in this box.
(* For details of the V.Networks registration procedure, see [3-2] on
page 9.)
3. Creating a View Window
3-1.Right click the root item (item at the top) in the View window list (on the
left of the Management Explorer) and select [New View Window].
3-2.When a box as shown below appears, enter the desired View window
name.
Click [OK] to create the named View window.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Creating a Camera Group
A camera group can be created in the V.Networks list (on the right of the
screen) for subject management use.
Right click the root item or a camera group and select [New] - [Group].
(Camera groups can be created in up to two layers.)
5. Adding V.Networks to a View Window
To add V. Networks to a View Window, "drag-and-drop" it to the desired View
window.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Changing the Setting of a View Window
Double-click the View window for which the setting is to be changed, or right
click it and select [Properties]. The [View Window Setup] box will appear.
Double-click.
(* For details of the View window setting operation, see [CHANGING THE
VIEW WINDOW SETUP] on page 26 and on.)
7. Changing the V.Networks Setting
Double-click the V.Networks setting that is to be changed, or right click it
and select [Properties]. The [V.Networks Setup] box will appear.
Double-click.
(* For details of the V.Networks setting operation, see [CHANGING THE
V.NETWORKS SETUP] on page 32 and on.)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Setting the Alarm
Right click the View window for which you want to set or change the alarm
setup and select [Alarm Setting]. The [Alarm Setting] box will appear.
(* For details on the alarm setting operation, see [SETTING ALARM] on
page 35 and on.)
9. Deleting an Item
To delete a "View Window", "V.Networks", "Group" or "V.Networks registered
in a View Window", select the item to be deleted and press the Delete key on
the keyboard, or right click the item to be deleted and select [Delete].
(* Deleting a camera group also deletes the contained V.Networks.)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Importing/Exporting V.Networks Registration Information into/from an External File
Use this function when it is required to create a new workspace and to register
in it a V.Networks that has already been registered elsewhere.
This registers all the data contained in the V.Networks (including its name
and IP address).
Procedure
1. In a workspace that already has V.Networks registered in it, execute
[Export] to compile the V.Networks registration data to file.
2. Create a new workspace, open the [Management Explorer] and execute
[Import].
3. Select the exported data file created in step 1.
V.Networks registration information can be imported or exported by executing
[Import] or [Export], which can be selected from the right-click menu in the
V.Networks list.
(* Only the V.Networks registration information can be exported to an external
file or imported from an external file.Also note that import from an external
file is available only if no V.Networks or Camera group are registered.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE VIEW WINDOW SETUP
1. Adding or deleteing V.NETWORKS to or from a View windows
1-1. When [View Window] - [Properties] in the menu bar is selected, the
following window appears.Use this window to change the setup of the
View window.
1-2. Select the View window you want to change the setting.
1-3. The list of currently registered V.NETWORKS names is shown under
item [Currently Registered V.Networks].
To add V.NETWORKS, go to step 1-4
To delete V.NETWORKS, go to step 1-5
26
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4. Click the [Add] button. When the [Add V.Networks] window appears
showing the list of V.NETWORKS currently registered in the workspaces
select the V.NETWORKS you want to add and click the [Add] button.
The addition is complete when the name of the added V.NETWORKS
is displayed in the [Currently registered V.Networks] field.
*Up to 16 V.NETWORKS units can be registered per View window. It
is not permitted to register more than 16 V.NETWORKS.
1-5. In the [Currently registered V.Networks] field, select and highlight the
V.NETWORKS to be deleted and click the [Delete] button. The deletion
is completed when the name of the specified V.NETWORKS disappears
from the [Currently registered V.Networks] field.
2. Changing the image switching interval
When more than one V.NETWORKS is registered in a single View window,
this function sets the interval of switching the images of different
V.NETWORKS in seconds. If it is not required to switch V.NETWORKS,
click the mouse right button and on the view window use [Pause Switching].
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Changing the window size
This function changes the size of the View window.
Select the window size from three options of 160x120, 320x240 and
640x480.
REMARK : If the view window size is increased more than the camera image size,
the image quality becomes coarse due to image magnification.
4. Setting the information display
This function displays information on the currently displayed V.NETWORKS.
1. Display no information.
2. Display the V.NETWORKS name.
3. Display the V.NETWORKS name and V.NETWORKS ID.
4. Display the V.NETWORKS name, V.NETWORKS ID and model name.
Select one of the four options above (also see the figure on the right).
(The information is displayed in the same color as the color set for the
Time Stamp.)
V.NETWORKS name
V.NETWORKS ID
V.NETWORKS model name
Time stamp : Displays the current time of day in the View window.
Status : Displays the name, ID and model name of V.NETWORKS.
The display or non-display as well as the display style can be set.
The settings can be confirmed in the preview.
Color : Sets the color of characters and the backgrounds of information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Recording setup
This function will change the settings related to recording. The settings
made here are also reflected in timer recording.
[Storage period]
Specifies the period for which the recorded file is to be saved in the
save destination.
•
"No limit"
The recorded file will be saved without any storage limit.
"XXX Days" (The setting range is between 1 and 180 days.)
The recorded file will be saved for the set number of days, after which it
will be erased automatically. (* "XXX" represents the setting value.)
[Lower Disk Size]
Specifies the operation to be taken when the capacity or save destination
disk is lower than 50MByte.
•
"Stop Recording"
Recording is stopped.
"
Remove Old" (YYY Days) (The setting range is between 1 and 180 days.)
Delete all the files except most recent YYY days and continue recoding.
CAUTION !!
•
Note that the [Storage period] and the [Erase Period] set are eventually
the settings. The actual recording period depends on the available capacity
in the disk.
•
Even when "Remove Old" is selected, recording stops if there is no recorded
files before the set day or if insufficient available capacity may be obtained
by erasing the recorded files before the set day.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
[Recording Interval]
Specifies the interval of recording of each frame in seconds.
•
Set in the range from 0 to 120 seconds.
(* If "0 s" is set, all of the images from the V.Networks will be recorded.)
[Save in]
Sets the folder where you want to save the recording file.
Can be set for each View window.
•
•
[REC mark]
Displays characters "REC" at the top right of the View window during
•
recording.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING ACCENT FRAME OF VIEW WINDOW
An Accent Frame makes it easy to identify the active (currently selected) View
window.
Accent frame
Procedure
1. In the menu bar, click [View Window] - [Accent Frame].
2. Check the check box in the following box to set the Accent Frame.
(* The color and thickness of the Accent Frame can be changed.)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE V.NETWORKS SETUP
Details of V.NETWORKS including the image quality can be set.
[Compression Rate]
Specifies the level of image compression.
•
[Quality] *Specifies the image quality.
Saturation
Color Balance
Gain (*)
Adjusts the color depth of colors.
Adjusts the balance blue and red.
Adjusts the sensitivity.
Exposure (*)
Contrast (*)
Brightness
AGC (*)
Adjusts the iris.
Adjusts the contrast.
Adjusts the brightness.
Automatically adjusts the sensitivity.
* Depending on the camera type and version, it may sometimes be
impossible to adjust these items.
[Connection]
For the connection setup, see [3-2] on page 9.
•
[Upside down]
Displays the V.NETWORKS images upside down.
•
( Perform settings according to the circumstances of the camera installation.)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
[Image size]
Sets the sizes of the images sent from V.NETWORKS.
•
X
X
X
Select the desired size from 160 120, 320 240 and 640 480.
* This setup adjusts the size of the image sent from the V.NETWORKS.
Note that it does not adjust the size of the displayed View window.
[Frame Rate]
Sets the maximum frame rate of image transmission by V.NETWORKS.
•
Set a rate in the range from 30 Frame/sec. to 1 Frame/sec.
*In this context, the frame rate refers to the transmission frame rate of the
V.NETWORKS unit. The image display rate shown on the PC is variable
depending on the PC performance and the LAN environment.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE POSITION MEMORY
This function changes the setting of the position memory for panning,
•
tilting(VN-C2U VN-C3U) and zooming (VN-C3U only).
Procedure
1. In the menu bar, click [V.Networks] - [Position Memory].
2. Select the V.NETWORKS for which you want to change the position
memory.
* The current registration information is displayed in the [PAN/TILT/ZOOM]
field.
3. Operate the panning, tilting and zooming to set the conditions you want
to register.
4. In the position memory bank from 1 to 10 (from 1 to 6 with the VN-C2U),
click the [Memory] button with the memory number you want to use.
Now the position memory setting is complete.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
ALARM SETTING
The following procedure sets the operation to be performed when an alarm
signal is triggered.
(It is required to set up the V.Networks alarm in advance. For the setup of
V.Networks, refer to the "Setup for the Alarm Function" in the manual provided
with the V.Networks.)
Procedure
1. In the menu bar, click [Alarm] - [Alarm Setting].
2. Select the View window in which it is required to set up the alarm.
3. In the selected View window, select one of the V.Networks that is
available for the alarm operation.
4. Under the [Alarm 1], [Alarm 2] and [Relay Alarm] tabs, set the operation
items to be executed when an alarm is triggered.
Operation Items
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Items
1.Start Recording
Starts the recording of the View window for which the alarm occurred.
When the [Stop recording after] check box is checked, recording of the
View window stops after the specified time period has elapsed.
(* Other recordings such as timer recording also stops.)
2.Stop Recording
Stops recording of the View Window with which the alarm occurred.
(* Other recording such as timer recording also stops.)
3.On Line
When the View window is hide, it forces to show it for which the alarm
occurs.
4.Priority
When more than one camera is displayed by switching, it switches to the
V.Networks for which the alarm occurs and the switching between
cameras pauses temporarily.
(* The pause can be canceled by clicking the desired View window.)
When the [Put an accent frame View Window] check box is checked,
the View window is displayed in the accent frame.
5.Windows Message
Display a message on the View window which is entered in advance.
(Up to 64 characters.)
(* The display can be turned off by clicking the desired View window.
The default color of the message characters is red.)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
6.Popup Message
Pop-up a message which is entered in advance.
(* Up to 64 characters and 32 pop-up message.)
7.Change View Size
Changes the size of the View Window for which the alarm occurs.
(* The size of the images transmitted from the V.Networks is not changed.)
8.Play Wave
Plays back the specified Wave file.
(* If a large Wave file is selected, the operation may become slow depending
on the PC performance.To prevent this, it is recommended to select a
smaller Wave file.)
9.Others
[FrameRate], [Image size], [Compression Rate] of the V.Networks for which
the alarm occurs, [Recording Interval] of the corresponding View window
can be changed.
When the [Return to original after] check box is checked, the changed
setting returns to the previous one after the specified period of time has
elapsed.
(* However, the changed setting does not return to the previous one if
recording is stopped manually before the specified time period etc.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
ARRANGING THE WINDOWS
Arrange Windows
•
•
Arranges the View windows.
(Arranging is sometimes not possible depending on the numbers and sizes
of the windows.)
Align with Grid
•
•
•
•
Arranges the View windows by automatically aligning them with the grid.
Show All/Hide All
•
Show or hide all of the registered View windows.
Window List
•
Display all the View windows registered in the workspaces.
A check mark is shown to the left of the currently displayed window.
Placing a check mark causes the corresponding View window to be
•
•
displayed,and removing it causes the View window to disappear.
View Window
“REC” displayed during recording
(The display can be either set or
defeated)
Time stamp
(The display can be either
set or defeated)
View window name
(Tool tip)
(The display can be either
set or defeated)
Left button
Click Selects a window.
Drag Moves a View window.
Double-click Panning, tilting.
Ctrl + Double-click Pop-up
•
V.NETWORKS Information
(Shows the model name , ID and
name. The display can be either
set or defeated)
Right button
Click Right-click menu
•
38
Download from Www.Somanuals.com. All Manuals Search And Download.
RIGHT-CLICK MENU
Clicking the right button of the mouse on the View window displays the right-
click menu as shown below. The right-click menu can be used to control the
following functions.
Tele
•
•
•
•
Zooms into an image.(VN-C3U only)
Wide
•
Zooms out from an image.(VN-C3U only)
Larger
•
Magnifies image without changing the
X
resolution.Image size changes from 160 120 to
X
X
320 240 and 640 480. (The size of the images
transmitted by each V.NETWORKS is not affected.)
Smaller
Right-click menu
•
•
Reduces image size without changing the resolution.
Image size changes from 640 480 to 320 240 and 160 120. (The size
of the images transmitted by each V.NETWORKS is not affected.)
•
X
X
X
Hide
•
•
•
•
•
Hide the currently displayed View window.
Pause Switching
•
Lets the image switching of V.NETWORKS pause temporarily.
Show Time Stamp
•
Displays the current time of day on the View window screen.
Properties
•
Displays the [View Window setup] window.
(* For details on the View window, see "CHANGING THE VIEW WINDOW
SETUP" on page 19.)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
UNINSTALLATION
(Procedure for Windows98)
Use the following procedure to uninstall (Delete) the Multi Camera Browser
from your PC.
1. In the taskbar, select [Start] - [Settings] - [Control Panel]
2. In the Control Panel, double-click "Add/Remove programs".
3. When the [Add/Remove programs Property] window appears, select
"vn-s200u Multi Camera Browser" under the [Install/Uninstall] tag and
click the [Add/Remove] button.
The recording files (including the folders having the View window names)
and the Multi Camera Browser workspace setting file (*.vnw) are not deleted
by uninstalling.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
You have forgotten the IP The list of the IP addresses of the V.NETWORKS
address of V.NETWORKS that cameras connected to the network can be acquired
has been changed using the using the [Search] button of the V.NETWORKS
V.NETWORKS setup tool.
setup tool provided with the VN-C1U/C2U/C3U.
The history of modifications with the V.NETWORKS
setup tool is stored in file "Vnetst.log" in the root
directory using the following format.
IP before change, ID after change
IP before change, ID after change
Date & time (Day/Month/Year/Hour: Minute)
If the IP address cannot be identified referring to
the Vnetst.log, it should be treated as a repair item.
Please consult your dealer.
You have forgotten the password Cancellation of password protection is handled as
set with the password protect a repair item. Please consult your dealer.
function.
For security, your dealer may request you to present
your personal ID card.
The image size or position
changes spontaneously.
When a single V.NETWORKS unit is connected to
more than one PC, the PC, which last controlled or
set the V.NETWORKS is given precedence.
(To the next page)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The colors look unnatural.
Check the color adjustments of the display and
video card.
The hues of displayed colors may be variable
depending on the video card and monitor display
of the PC system. This may sometimes be
corrected by adjusting the color control of the
display. With some video cards, color adjustment
is available in "Screen Properties" (which can be
displayed by right-clicking the mouse on the
desktop).
•
Set the True Color (24-bit) display.
It is difficult to reproduce natural hues with High
Color (16-bit) or lower-quality settings. We
recommend the use of the True Color setting.
•
•
Adjust the color balance.
The hues may be corrected with W/B Blue and
Red controls in the Set Image Quality menu.
Turn "Auto" or "AGC" off then on again.
When recording scenes with different light sources
(for example when recording outdoors under
sunlight and indoors under fluorescent light
alternately), it takes some time before the auto-
tracking white balance control is activated. In such
a case, remove the check mark of "Auto" or "AGC"
in the Set Image Quality menu and check it again.
This speeds up the time before the white balance
control is activated.
The image size or position changes spontaneously.
When a single V.NETWORKS unit is connected to
more than one PC, the PC, which last controlled
or set the V.NETWORKS is given precedence.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Japan
SS961541-002
©2001 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|