LYT2019-002A-M
EN
GUIDEBOOK
MEMORY CAMERA
GZ-MS130U
Dear Customer
Thank you for purchasing
this memory camera. Before
use, please read the safety
information and precautions
contained in pages 2 and 3 to
ensure safe use of this product.
For Future Reference:
Enter the Model No. (located
on the bottom of the memory
camera) and Serial No. (located
on the battery pack mount of the
memory camera below.
Model No.
Serial No.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remember that this camcorder is intended for
private consumer use only.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by
the manufacturer.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
Manufactured under license from Dolby
•
Laboratories. Dolby and double-D symbol are
trademarks of Dolby Laboratories.
Windows® is either a registered trademark or
•
trademark of Microsoft Corporation in the United
States and/or other countries.
Macintosh is a registered trademark of Apple
Inc.
•
YouTube and the YouTube logo are trademarks
and/or registered trademarks of YouTube LLC.
•
10.Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When a cart
iTunes is a trademark of Apple Inc., registered
in the U. S. and other countries.
•
Other product and company names included
•
in this instruction manual are trademarks
and/or registered trademarks of their respective
holders.
is used, use caution
when moving the
cart/apparatus combination to avoid injury from
tip-over.
11.Unplug this apparatus during lightning storms
or when unused for long periods of time.
12.Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
If this symbol is shown, it is only
valid in the European Union.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Start Guide
Charge the battery before recording
Turn off the camcorder and attach the battery pack.
Access lamp
Blinks: Accessing files
Power/charge lamp
Blinks: Charging
goes out: Charging finished
Do not remove the
AC adapter, the
battery pack or the
SD card when
the lamp is blinking.
Open the cover
Battery Pack
The battery pack
is not charged
at the time of
purchase.
AC Adapter
To AC Outlet
(110V to 240V)
CAUTION
Be sure to use JVC battery packs. If you use any other battery packs besides
JVC battery packs, safety and performance can not be guaranteed.
Grip Adjustment
Adjust the strap and fasten.
Grip strap
• Do not pull the strap when you open the
fasten. Please use the tab to open it.
• Fasten the strap when you grip the
camcorder.
• When carrying the camcorder, please be
careful not to drop it.
Tab
Fasten
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Date/Time Setting
Select [CLOCK SETTING]
S
T
Open the LCD monitor to
CLOCK ADJUST
CLOCK SETTING
turn on the camcorder
Q
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
Power Button
SET THE CITY, DATE AND TIME
QUIT
SET
Select the city closest to
the area where you use
the camcorder
AREA SETTING
LCD monitor
NOV.1.2009 04:55PM
QUIT
SET
Select [YES] within
10 seconds
R
Slide your finger up and down on
the sensor. Then touch OK.
Select [ON] if daylight
Usaving time is effective.
SET DATE/TIME!
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
YES
NO
OFF
SET
NOV. 1. 2009 04.55PM
SET DAYLIGHT SAVING TIME
QUIT
SET
R
When the message disappears, press the
•
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
Set the date and time
V
•
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING
DATE
TIME
NOV
1
2009
4
55
PM
GMT+ 9:00
QUIT
SAVE
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recording
CAUTION
Before recording an important scene, it is recommended to conduct a trial
recording.
Slide the mode switch to select ! (video) mode
Q
Sꢅelect recording mode
R
PLAY/REC
The mode changes
when you press the
button.
The auto recording
indicator appears.
[
]
4 h 59 m
0 : 04 : 01
M
Start recording
S
Remaining space on built-in
memory or SD card
Record-
standby
Video
Quality
Press the START/
STOP button to start
recording, and press
it again to stop.
C
D
[
]
4 h 59 m
0 : 04 : 01
REC
Recording
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄ
Playing back
Select playback mode
Q
R
S
PLAY/REC
The mode changes when
you press the button.
Select the desired file
Index screen
VIDEO PLAYBACK
1/2
NOV. 01. 2009 04:55PM
DIGEST
Select F(Touch OK)
Playback screen
To perform operations such as forward search or reverse search (Z pg. 26)
To view files on TV (Z pg. 33)
L
L
It is recommended to copy your important recorded data to a DVD or other recording media
for storage. JVC will not be responsible for any lost data.
CAUTION
Don’t forget to make copies after recording!
•
•
•
•
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC Software Licence Agreement
JVC SOFTWARE LICENCE AGREEMENT
4 LIMITED WARRANTY
JVC warrants that any media in which the
Program is embodied are free from any defects
in materials and workmanship for a period of
thirty (30) days from the date of Your purchasing
any our products accompanying the Program.
JVC’s entire liability and your exclusive remedy
in connection with the Program shall be
replacement of such defective media. EXCEPT
FOR THE EXPRESS WARRANTIES STATED
HEREIN AND TO THE EXTENT PERMITTED BY
APPLICABLE LAW, JVC AND ITS LICENSORS
DISCLAIM ANY OTHER WARRANTIES, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE IN REGARD TO
THE PROGRAM AND THE ACCOMPANYING
PRINTED MATERIALS. SHOULD THERE BE
ANY PROBLEM ARISING FROM OR CAUSED
BY THE PROGRAM, YOU SHOULD SETTLE
ALL SUCH PROBLEM AT YOUR OWN COST
AND EXPENSE.
IMPORTANT
TO CUSTOMERS: PLEASE MAKE SURE TO
READ THIS CAREFULLY BEFORE INSTALLING
OR USING THE SOFTWARE PROGRAM
NAMED “DIGITAL PHOTO NAVIGATOR”
(“Program”) ON YOUR PC.
The right to use the Program is granted by Victor
Company of Japan, Limited (“JVC”) to You only
on the condition that You agree to the following.
Should You not agree to the terms hereof, You
may not install or use the Program. HOWEVER,
INSTALLING OR USING THE PROGRAM
INDICATES YOUR ACCEPTANCE OF THESE
TERMS AND CONDITIONS.
1 COPYRIGHT; OWNERSHIP
You acknowledge that all copyrights and other
intellectual property rights in the Program are
owned by JVC and its licensor, and remain
vested in JVC and such licensor. The Program is
protected under the copyright law of Japan and
other countries, and related Conventions.
5 LIMITED LIABILITY
2 GRANT OF LICENCE
TO THE EXTENT PERMITTED BY APPLICABLE
LAW, IN NO EVENT SHALL JVC AND ITS
LICENSORS BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHATSOEVER, REGARDLESS
OF THE FORM OF ACTION WHETHER IN
CONTRACT, TORT OR OTHERWISE ARISING
OUT OF OR IN CONNECTION WITH THE USE
OF OR INABILITY TO USE THE PROGRAM,
EVEN IF JVC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.YOU
WILL INDEMNIFY AND HOLD HARMLESS
JVC FROM ANY LOSS, LIABILITY OR
COST ARISING OUT OF OR IN ANY WAY
CONNECTED TO CLAIMS FROM ANY THIRD
PARTY RELATING TO THE USE OF THE
PROGRAM.
(1) Subject to the conditions of this Agreement,
JVC grants to You a non-exclusive right to
use the Program.You may install and use the
Program on a HDD or other storage devices
incorporated in Your PC.
(2) You may make one (1) copy of the Program
solely for your personal backup or archival
purposes.
3 RESTRICTION ON THE PROGRAM
(1) You may not reverse engineer, decompile,
disassemble, revise or modify the Program,
except to the extent that expressly permitted
by applicable law.
(2) You may not copy or use the Program, in
whole or in part, other than as expressly
specified in this Agreement.
(3) You have no right to grant a licence to use
the Program, and may not distribute, rent,
lease or transfer the Program to any third
party or otherwise let them use the Program.
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
6 TERM
If You acquired the Program in Germany, the
provisions of Sections 4 (Limited Warranty)
and 5 (Limited Liability) provided above will be
replaced with those of the German version of this
Agreement.
This Agreement will become effective on the date
when You install and use the Program on Your
machine, and continue to be in effect until the
termination under the following provision.
Should You breach any provision of this
Agreement, JVC may terminate this Agreement
without giving any notice to You. In this event,
JVC may claim against You for any damages
caused by Your breach. Should this Agreement
be terminated, You must immediately destroy the
Program stored in Your machine (including the
erasing from any memory in Your PC), and no
longer own such Program.
CAUTIONS:
Operate this equipment according to the
operating procedures described in this manual.
•
Use only the provided CD-ROM. Never use any
other CD-ROM to run this software.
•
Do not attempt to modify this software.
Changes or modifications not approved by
JVC could void user’s authority to operate the
equipment.
•
•
7 EXPORT CONTROL
You agree that You will not ship, transfer or
export the Program or underlying information
and technology to any countries to which Japan
and other relevant countries have initiated an
embargo on such goods.
How to handle a CD-ROM
Take care not to soil or scratch the mirror
•
surface (opposite to the printed surface). Do
not write anything or put a sticker on either
the front or back surface. If the CD-ROM
gets dirty, gently wipe it with a soft cloth
outward from the center hole.
8 U.S. GOVERNMENT USER
If You are an agency of the United States of
America (the “Government”), You acknowledge
JVC’s representation that the Program is
a “Commercial Item” as defined in Federal
Acquisition Regulation (FAR) part 2.101 (g)
consisting unpublished “Commercial Computer
Software” as those items are used at FAR part
12.212 and is only licenced to You with the same
use rights JVC grants all commercial end users
pursuant to the terms of this Agreement.
Do not use conventional disc cleaners or
cleaning spray.
•
Do not bend the CD-ROM or touch its mirror
surface.
•
Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
•
9 GENERAL
(1) No modification, change, addition, deletion
or other alternation of or to this Agreement
will be valid unless reduced to writing and
signed by an authorized representative of
JVC.
You can find the latest information (in
English) on the provided software program at
our world wide web server at
(2) If any part of this Agreement is held
invalid by or in conflict with any law having
jurisdiction over this Agreement, the
remaining provisions will remain in full force
and effect.
(3) This Agreement shall be governed by and
interpreted under the laws of Japan. The
Tokyo District Court has jurisdiction over all
disputes which may arise with respect to the
execution, interpretation and performance of
this Agreement.
Victor Company of Japan, Limited
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First!
Make a backup of important recorded data
It is recommended to copy your important recorded data to a DVD or other recording
media for storage. JVC will not be responsible for any lost data.
Make a trial recording
Before the actual recording of important data, make a trial recording and play back the
recorded data to check that the video and sound have been recorded correctly. We
recommend you to use the same recording media when performing both the trial recording
and the actual recording.
Reset the camcorder if it does not operate correctly
Close the LCD monitor and remove the power supply (battery pack or AC adapter) from
the camcorder, then reattach it.
Precautions on handling batteries
Be sure to use the JVC BN-VF808U/VF815U/VF823U battery packs. This product
•
includes patented and other proprietary technology and is made to be used with the JVC
battery and not with other batteries. JVC cannot guarantee safety or performance of this
product when it is operated by other batteries.
If the camcorder is subjected to electrostatic discharge, turn off the power before using it
again.
•
If a malfunction occurs, stop using the camcorder immediately
Recorded data may be erased while the camcorder is being repaired or inspected. Back
up all data before requesting repairs or inspections.
Because camcorder may be used for demonstration in a shop,
the demonstration mode is set to on by default
To deactivate the demonstration mode, set [DEMO MODE] to [OFF]. (Z pg. 60)
When Using an SD Card
Operations are confirmed on the following SD cards. Class 4 or higher compatible SD or
SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC
card (4 GB to 32 GB)
•
If other media are used, they may fail to record data correctly, or they may lose data that
had already been recorded.
•
MultiMediaCards are not supported.
•
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
GETTING STARTED
Accessories .......................................... 13
Viewing Files on TV .............................. 33
Connection with TV......................................33
Playback Operation .....................................33
Index ...................................................... 14
Indications on LCD Monitor................. 16
EDITING
Necessary Settings before Use........... 18
Charging the Battery Pack...........................18
Managing Files...................................... 34
Deleting Files...............................................34
Protecting Files............................................36
Viewing File Information ..............................37
Changing the Event Registration.................38
Other Settings....................................... 20
Language Setting ........................................20
Tripod Mounting...........................................20
Using an SD Card........................................21
Playlists................................................. 40
Creating Playlists.........................................40
Playing Back Playlists..................................41
Other Operations of Playlists.......................41
RECORDING/PLAYBACK
Recording Files..................................... 22
Video Recording..........................................22
Still Image Recording ..................................23
Zooming.......................................................24
LED Light.....................................................24
Checking the Remaining Battery Power......24
Checking the Remaining Space on the
recording medium ......................................25
Registering Files to Events..........................25
Playing Back Files................................ 26
Video Playback............................................26
Still Image Playback ....................................27
Manual Recording ............................... 30
Change to Manual Recording Mode............30
Backlight Compensation..............................30
Manual Setting Menu...................................30
11
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING
How to use the Touch
Sensor
After the menu is displayed on the LCD
monitor:
Copying Files........................................ 42
Copying/Moving Files ..................................42
Creating a DVD using a PC.........................47
VIDEO
MANUAL SETTING
LIGHT
REGISTER EVENT
VIDEO QUALITY
USE DETAIL SETTINGS BASED
SET
QUIT
FURTHER INFORMATION
Changing the Menu Settings............... 58
Troubleshooting.................................... 63
Warning Indications ............................. 66
Cleaning ................................................ 68
Specifications ....................................... 69
Cautions ................................................ 71
Terms..................................................... 74
QSlide your finger up and down on the
sensor.
RSelect [SET]. (Touch OK.)
A
B
A
To select an on-screen button appearing
on the left side, touch the portion of the
sensor next to the on-screen button.
B
To select an on-screen button appearing at
the bottom of the screen, touch the buttons
underneath them.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
AC Adapter
AP-V20U
Battery Pack
BN-VF808U
Audio/Video
Cable
Remote Control
RM-V751U
USB Cable
CD-ROM
Core Filter (x2)
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.
Attaching the Core Filter
The core filter reduces interference caused when connecting to other devices.
USB Cable:Wind once
AC adapter:Wind twice
Release the stopper.
3 cm (1-3/16")
To be connected
to the camcorder
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
To Reinsert the Battery
Beam Effective Area
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
Remote Sensor
Effective distance:
5 m (16 ft)
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Camcorder
Remote Control
! Touch Sensor
# OK Button
$ MENU Button
Q Infrared Beam Transmitting Window
R ZOOM (T/W) Buttons (Zoom in/out)
S Up Button
% Power (1) Button
T Skip Backward Button
( EXPORT Button
) AV Connector
U Left Button
V Back Button
* UPLOAD Button (Z pg. 56)
, Mode Switch [!, #]
- DIRECT DVD Button (Z pg. 44)
W PLAYLIST Button
X START/STOP Button
Y S. SHOT (SNAPSHOT) Button
Z INFO Button
a Skip Forward Button
b PLAY/PAUSE Button
. START/STOP Button (Z pg. 22)
Speaker Volume Control (Z pg. 26)
1 Speaker
2DC Connector
c Right Button
d Next Button
e Down Button
f INDEX Button*
g DISP Button
4 Camera Sensor
5 LED Light (Z pg. 24)
6 Lens Cover
7 Lens
8 Stereo Microphone
* Each time you press INDEX, the screen
switches as shown below:
!ꢀmode:
Index Screen « Group Index Screen
#ꢀmode:
Index Screen «ꢀDate Index Screen
9 Stud Hole
: Tripod Mounting Socket (Z pg. 20)
; Battery Release Button [BATT.] (Z pg. 18)
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications on LCD Monitor
During both Video and Still Image
Recording
During Video Recording Only
[4h59m]
REC
LIB.
0:04:01
PHOTO
1/4000
0
W
T
SD
LCD
JAN.01.2009 4:55 PM
! Mode Indicator
# EXPORT Mode Indicator (Z pg. 54)
$ Counter
% Upload Mode Indicator (Z pg. 56)
& Video Quality:
! Selected Operation Mode Indicator
(Z pg. 30)
4 : Auto Mode
3 : Manual Mode
(ULTRA FINE),
(FINE),
(ECONOMY) (Z pg. 58)
B
C
# Effect Mode Indicator (Z pg. 32)
$ Tele Macro Mode Indicator (Z pg. 32)
% LED Light Indicator (Z pg. 24)
& Scene Select Mode Indicator (Z pg. 31)
) Zoom Indicator (Z pg. 24)
(NORMAL),
D
E
( Remaining Time
)
REC: (Appears during recording.)
M
: (Appears during record-standby mode.)
MQ
* Digital Image Stabilizer (DIS) Indicator
(Appears when [DIS] is set to [OFF].)
(Z pg. 59)
SD
: SD Card
, Shooting Indicator (Z pg. 22)
- Wind Cut Indicator (Z pg. 59)
. Event Indicator (Z pg. 25)
: Built-in memory
+ White Balance Indicator (Z pg. 32)
, Monitor Backlight Indicator (Z pg. 60)
- Battery Indicator
. Date/Time (Z pg. 19)
/ Manual Focus Adjustment Indicator
(Z pg. 31)
During Still Image Recording Only
0 Backlight Compensation Indicator
(Z pg. 30)
1 Brightness Control Indicator (Z pg. 31)
. : Photometry Area Control Indicator
(Z pg. 32)
FINE [9999]
10
PHOTO
2 Shutter Speed (Z pg. 31)
! Mode Indicator
# Focus Indicator (Z pg. 23)
$ Image Quality: FINE (fine) or STD
(standard) (Z pg. 58)
% Remaining Number of Shots
& Shooting Indicator (Z pg. 23)
( Shutter Mode Indicator (Z pg. 58)
) Self-Timer Indicator (Z pg. 58)
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
During Video Playback
During Still Image Playback
101- 0098
1: 55 : 01
+4
SD
SD
8
JAN.01.2009 4:55 PM
JAN.01.2009 4:55 PM
! Mode Indicator
# Folder/File Number
$ Slide Show Playback Indicator
% Battery Indicator
& Date/Time (Z pg. 19)
! Mode Indicator
# Playlist Playback Indicator (Appears when
playing back a playlist.) (Z pg. 41)
$ Video Quality:
(ULTRA FINE),
(NORMAL),
% Counter
(FINE),
(ECONOMY) (Z pg. 58)
B
C
D
E
& Playback Mode
:Playback
F
:Pause
Q
:Forward Search
:Reverse Search
K
J
G
E
:Forward Slow-Motion
:Reverse Slow-Motion
(The number on the left shows speed.)
( Battery Indicator
) Date/Time (Z pg. 19)
* Volume Level Indicator
1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Necessary Settings before Use
To check the remaining battery power
Required charging/recording time
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
L
L
Charging the Battery Pack
1
2
Close the LCD monitor to turn off the
camcorder.
Recording time
2 hr. 45 min.*
Battery pack
Charging time
1 hr. 50 min.
Attach the battery pack, then
connect the AC adapter.
BN-VF808U
(Provided)
With the “v” (arrow) on the battery pack
•
pointing at the correct direction, slide the
battery pack until it locks in place.
BN-VF815U
BN-VF823U
2 hr. 40 min.
3 hr. 40 min.
5 hr. 25 min.*
8 hr. 10 min.*
DC Jack
To detach the battery pack
L
v Arrow
NOTE
AC Adapter
To AC Outlet
(110V to 240V)
You can also use the camcorder with just
the AC adapter.
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving subject.
•
•
The power/charge lamp blinks to indicate
charging has started.
When the lamp goes out, charging is
finished.
•
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
•
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
Date/Time Setting
OFF
NOV.1.2009 04.55PM
1
Open the LCD monitor to turn on the
camcorder.
SET DAYLIGHT SAVING TIME
QUIT
SET
2
3
Touch MENU.
8
9
Set the date and time.
Select the item by using the touch sensor
and select [ ] to set.
Select [DISPLAY SETTINGS].
VIDEO
}
WIND CUT
CLOCK SETTING
AUTO SWITCH REC MEDIA
>
>
DISPLAY SETTINGS
DATE
TIME
BASIC SETTINGS
CONFIGURE ON-SCREEN DISPLAY
NOV
1
2009
4
55
PM
QUIT
SET
GMT+ 9:00
QUIT
SAVE
4
5
6
Select [CLOCK ADJUST].
DISPLAY SETTINGS
Select [SAVE].
To reset the setting, select [QUIT]
LANGUAGE
CLOCK ADJUST
DATE DISPLAY STYLE
MONITOR BRIGHT
SET DATE AND TIME
SET
Setting the clock to local time
when traveling
QUIT
Select [CLOCK SETTING].
After performing steps 1-4
CLOCK ADJUST
CLOCK SETTING
5
Select [AREA SETTING].
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
CLOCK ADJUST
SET THE CITY, DATE AND TIME
SET
CLOCK SETTING
AREA SETTING
QUIT
SET FOR DAYLIGHT SAVING TIME
Select the city closest to the area
where you use the camcorder.
SET WHEN IN ANOTHER COUNTRY
SET
QUIT
Selected area is highlighted
6
Select the city closest to the area
you are traveling.
AREA SETTING
Principal city of
the selected area
AREA SETTING
Time difference to
GMT
NOV.1.2009 04:55PM
QUIT
SET
7
Select [ON] if daylight saving time is
effective.
NOV.1.2009 04:55PM
QUIT
SET
[ON]: Clock is advanced one hour from
the normal time which you set.
[OFF]: Deactivates the function.
To return to the previous screen
L
L
Select
.
@
To quit the screen
Select [QUIT].
1ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Settings
Tripod Mounting
Language Setting
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw,
and then rotate the camcorder clockwise to
mount it to the tripod.
The language on the display can be changed.
1
Open the LCD monitor to turn on the
camcorder.
2
3
Touch MENU.
Bottom of the
Camcorder
Select [DISPLAY SETTINGS].
VIDEO
WIND CUT
AUTO SWITCH REC MEDIA
>
>
DISPLAY SETTINGS
BASIC SETTINGS
CONFIGURE ON-SCREEN DISPLAY
QUIT
SET
4
Select [LANGUAGE].
DISPLAY SETTINGS
LANGUAGE
NOTE
CLOCK ADJUST
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
DATE DISPLAY STYLE
MONITOR BRIGHT
ON-SCREEN DISPLAY LANGUAGE
SET
QUIT
5
Select the desired language.
To return to the previous screen
L
L
Select
.
@
To quit the screen
Select [QUIT]
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
Using an SD Card
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
•
If you want to record to an SD card, the
following operations need to be performed.
Operations are confirmed on the following
SD cards: Class 4 or higher compatible
SD or SDHC card Panasonic, TOSHIBA,
SanDisk, ATP SD card (256 MB to 2 GB) or
SDHC card (4 GB to 32 GB).
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
Cards used to record video on this
camcorder cannot be played back on other
devices.
Some card readers (including internal card
readers in PCs) may not be able to support
SDHC format. If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using might be a
non-SDHC supported device. Please use
the camcorder or other SDHC compatible
devices to access the card.
Do not touch the terminal on the reverse
side of the label.
•
•
RChange the recording medium
The camcorder is programmed to record on
the BUILT-IN MEMORY flash when it is
shipped from the factory.You can change the
recording medium to SD card.
•
•
•
Set [REC MEDIA FOR VIDEO] to [SD
CARD) and [REC MEDIA FOR IMAGE] to
•
MEDIA SETTINGS
BUILT-IN MEMORY
SD CARD
ERASE ALL DATA ON
QUIT
SET
QInsert an SD card
SFormat an SD card when using it for
the first time
Preparation:
Press Power (1) button to turn off the
camcorder.
Select [FORMAT SD CARD] to format
the card. (Z pg. 62)
1
Open the SD card cover.
MEDIA SETTINGS
REC MEDIA FOR VIDEO
REC MEDIA FOR IMAGE
2
Firmly insert the card with its clipped
edge first.
FORMAT BUILT-IN MEM.
FORMAT SD CARD
ERASE ALL DATA ON
Clipped Edge
QUIT
SET
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be
responsible for any lost data.
3
Close the SD card cover.
To remove an SD card
Push the SD card once.
L
After the card comes out a little, pull it out.
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING/PLAYBACK
Recording Files
Video Recording
Press the PLAY/REC button to
select recording mode.
Slide the mode switch to select
! (video) mode.
PLAY/REC
[4 h 59 m]
0:00:00
SNAPSHOT
Press the START/STOP button to
start recording.
[4 h 59 m]
0:00:01 REC
Approximate remaining time
for recording appears.
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control).
LTo stop recording
LTo change the picture quality
Change the settings in [VIDEO QUALITY].
(Z pg. 58)
Press the START/STOP again.
LTo view the last recorded scene
Select A while recording is paused.
Selecting $ during playback deletes that
scene.
LTo change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO]. (Z pg. 59)
LTo record a still image during video
recording
Press SNAPSHOT.
NOTE
The video recording mode is automatically selected when you turn off the camcorder and then on
again.
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power.
•
•
After recording video for 12 consecutive hours, recording stops automatically.
A new file will be created for every 4 GB of continuous shooting.
This camcorder records video in MPEG2 format compliant with SD-VIDEO format. This camcorder is
not compatible with other digital video formats.
•
•
•
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Image Recording
Slide the mode switch to select
Press the PLAY/REC button to
select recording mode.
# (still image) mode.
PLAY/REC
FINE [9999]
Press and hold the SNAPSHOT
button halfway.
FINE
The ? indicator becomes green when
the captured image is focused.
LTo view the last recorded image
Select A after shooting.
Selecting $ during playback deletes
Press the SNAPSHOT button fully
to take the photo/picture.
that image.
LTo change the picture quality
Change the settings in [IMAGE
QUALITY]. (Z pg. 58)
LTo record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE]. (Z pg. 58)
FINE [9999]
PHOTO
NOTE
DIS (Digital Image Stabilizer) does not function during still image recording.
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power.
•
•
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Files (Continued)
Checking the Remaining Battery
Power
Zooming
Preparation:
Slide the mode switch to select ! or #
Preparation:
•
mode.
Attach the battery pack.
Press the PLAY/REC button to select
•
Press the PLAY/REC button to select
recording mode.
•
•
recording mode.
Zoom out
Zoom in
For ! mode:
Press the INFO button three times or INFO
and then select ;.
For # mode:
Press INFO.
W: Wide angle
T: Telephoto
DIRECT
DVD
BATTERY CONDITION
You can also zoom out/zoom in by selecting
[W] or [T] on the LCD monitor (On-screen
zoom control)
100%
MAX TIME
min
50%
INFO
Zoom Ratio (Factory-preset)
0%
QUIT
! mode
# mode
LTo return to the normal screen
Select [QUIT] or press INFO.
[80X/DIGITAL]
[35X/OPTICAL]
NOTE
LTo change the maximum zoom ratio (for
! mode only)
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
Change the settings in [ZOOM]. (Z pg. 59)
NOTE
Macro shooting is possible as close as
approx. 5 cm (2”) to the subject when the
zoom lever is set all the way to W.
LED Light
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
recording mode.
•
1
2
3
Touch MENU.
Select [LIGHT].
Select the desired setting.
The LED light remains on regardless
of the surrounding conditions.
ON
The LED light turns on automatically
when shooting in insufficient light
conditions.
AUTO
OFF
Deactivates this function
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Remaining Space on
the recording medium
Registering Files to Events
If you select an event to register the file to
before starting recording, the file will be
registered to the selected event, thus making
the file easy to find at playback.
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
recording mode.
•
•
Preparation:
Slide the mode switch to select ! mode.
Press the INFO button once (BUILT-IN
MEMORY) or twice (SD CARD).
•
Press the PLAY/REC button to select
•
recording mode.
DIRECT
DVD
MAX RECORDING TIME
BUILT-IN MEM
0h05m
1
Touch MENU.
0h07m
0h09m
0h26m
INFO
2
QUIT
SET
Select [REGISTER EVENT].
VIDEO
LIGHT
The maximum recording time is displayed for
each video quality mode.
REGISTER EVENT
VIDEO QUALITY
ZOOM
LTo change the picture quality
1) Select the video quality.
2) Select [SET].
FOR EASY SEARCHING ARRANGE
SET
QUIT
LTo Change the Recording Media
1) Press INFO to select Built-in Memory
or SD.
3
Select the event.
REGISTER EVENT
VACATION
2) Select [SET].
1
1
1
LTo quit the screen
1
Select [QUIT].
QUIT
SET
The selected event is displayed on the
screen.
LTo quit the screen
Select [QUIT].
LTo cancel the event registration
Select [CANCEL] in step 3.
LTo search a file by the event
NOTE
Once you select a certain event to register a
file, the setting will remain even if you turn off
the camcorder.
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Files
Video Playback
Press PLAY/REC to select the
playback mode.
Slide the mode switch to select
! (video) mode.
VIDEO PLAYBACK
1/2
PLAY/REC
NOV.01.2009 04:55PM
DIGEST
The index screen appears.
Select the desired file.
LTo delete a video
LTo move to the previous or next page
Touch [v] or [V] for over a second.
LTo play back a few seconds from each
select scene of the recorded videos
Touch [DIGEST].
Select * when playback is stopped.
LTo change the number of thumbnails
(6 thumbnails / 20 thumbnails)
Move the zoom lever to [T] or [W].
L Operations during Video Playback
LSpeaker volume
On-screen buttons
: Return to the first scene of the file
: Go to the first scene of the next file
: Return to the index screen
—:Turn down the volume
N
O
L
J
E
: Reverse search (during playback)
: Frame-by-frame playback in reverse
direction (during pause)*
: Playback
F
Q
K
G
: Pause
+ :Turn up the volume
: Forward search (during playback)
: Frame-by-frame playback in forward
direction (during pause)*
* Slow playback starts when you keep
touching the sensor button under E / G
for a while.
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Image Playback
Slide the mode switch to
Press PLAY/REC to select the
playback mode.
select # (still image) mode.
IMAGE PLAYBACK
1/2
PLAY/REC
NOV.01.2009 04:55PM
The index screen appears.
Select the desired file.
LTo move to the previous or next page
Touch [v] or [V] for over a second.
LTo delete a still image
Select $.
LTo change the number of thumbnails
(6 thumbnails/20 thumbnails)
Move the zoom lever to [T] or [W].
LOperations during Still Image Playback On-screen buttons
: Change playback order of slide show in reverse direction
: Change playback order of slide show in forward direction
: Return to the index screen
P
F
L
N
F
Q
O
: Display the previous file
: Start the slide show
: End the slide show
: Display the next file
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Files (Continued)
Date Index Screen
File Search Function
Preparation:
You can search the desired file by the
recording date.
Slide the mode switch to select ! or #
•
mode.
Select
.
1
2
Select the playback mode.
•
In case of # mode, go to step 3.
Group Index Screen
!
Select [SEARCH DATE].
You can search the desired file by the group.
The group is created automatically based on
recording date and time. And the contents of
the group are changed when adding/deleting
or editing scenes.
VIDEO PLAYBACK
1/2
GROUP
SEARCH DATE
SEARCH EVENT
SD
NOV.01.2009 04:55PM
SET
Select
.
1
2
Select the recording date.
3
4
Select [GROUP].
SEARCH DATE
NOV.01.2009
VIDEO PLAYBACK
GROUP
1/2
NOV.05.2009
NOV.20.2009
NOV.27.2009
DEC.29.2009
SET
SEARCH DATE
SEARCH EVENT
SD
QUIT
NOV.01.2009 04:55PM
SET
Select the file you want to play back.
NOV .01 .2009
1/2
Select the file you want to play back.
3
VIDEO (GROUP)
1/2
SD
1
3
2
1
NOV 01 2009 .04.55PM
SD
DIGEST QUIT
4
2
NOV.01.2009 04:55PM
DIGEST QUIT
LTo return to the index screen
Select @.
The number of files in the group is
displayed in the thumbnails.
LTo quit the screen
Select [QUIT].
LTo return to the index screen
Select @.
LTo quit the screen
Select [QUIT].
NOTE
The contents of the group may be changed
•
depending on the interval of the recording
time. To change the contents, register the
The created groups may not be listed by
recording date such as when copying the
files to an SD card.
•
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Event Screen
!
Playing Back MPG Files
You can search the desired file by the event
that you registered the file to when recording.
can search by the recording date to narrow
down the search.
An MOD file is created in the EXTMOV folder
when management information is corrupted.
Follow the procedure below to play back the
MPG files in the EXTMOV folder.
Preparation:
Slide the mode switch to select ! mode.
Select
.
•
1
2
Press the PLAY/REC button to select
•
playback mode.
Select the [SEARCH EVENT].
VIDEO PLAYBACK
1/2
1
Touch MENU.
GROUP
SEARCH DATE
SEARCH EVENT
SD
2
Select [PLAYBACK MPG FILE].
NOV.01.2009 04:55PM
SET
VIDEO
PLAYBACK PLAYLIST
EDIT PLAYLIST
REC
DUBBING PLAYBACK
Select the event.
3
4
PLAYBACK MPG FILE
PLAY DAMAGED FILES
QUIT
SET
SEARCH EVENT
VACATION
1
3
Select the file you want to play back.
1
1
1
(MPG)
1/2
QUIT
SET
SD
Select the recording date.
To display all the files, select
[ALL].
SEARCH EVENT
LTo return to the normal file playback
1
ALL
mode
NOV.01.2009
Select @.
NOV.05.2009
NOV.20.2009
NOV.27.2009
SET
QUIT
NOTE
Depending on the condition of the damaged
file, playback might fail or may not run
smoothly.
5
Select the file you want to play back.
NOV. 01 .2009
1
1/2
SD
NOV.01.2009 04:55PM
DIGEST QUIT
LTo return to the index screen
Select @.
LTo quit the screen
Select [QUIT].
LTo change the event registration of a
file
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Recording
Manual recording mode enables you to set
the focus and screen brightness etc. manually.
Manual Setting Menu
In the manual recording mode:
Change to Manual Recording Mode
Preparation:
1
Touch MENU.
Slide the mode switch to select ! or #
•
2
Select [MANUAL SETTING].
mode.
Press the PLAY/REC button to select
recording mode.
•
VIDEO
MANUAL SETTING
LIGHT
REGISTER EVENT
Select [A/M] twice.
VIDEO QUALITY
USE DETAIL SETTINGS BASED
[4 h 59 m]
QUIT
SET
3
4
Select the desired menu.
/
VIDEO
SCENE SELECT
FOCUS
LTo return to the auto recording mode
Select [A/M] so that the 4 indicator
appears.
ADJUST BRIGHTNESS
SHUTTER SPEED
THE BRIGHTNESS OF THE
SET
QUIT
Backlight Compensation
Select the desired setting.
Backlight compensation brightens the subject
by increasing the exposure.
VIDEO
AUTO
In the manual recording mode;
MANUAL
Select -.
QUIT
SET
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
REC
/
LTo return to the previous screen
Select @.
LTo quit the screen
LTo cancel backlight compensation
Select - again.
Select [QUIT].
NOTE
If the LCD monitor is turned upside down, -
is not displayed. Change the setting when the
LCD monitor is in the normal position.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus
Settings: [ ] = Factory-preset
1 [OFF]: Deactivates the function.
5 NIGHT: Records with more sensitivity in dim locations
by adjusting the shutter speed automatically.
TWILIGHT: Makes evening scenes look more natural.
6 PORTRAIT: The subject in the foreground is
accentuated by blurring the background.
H SPORTS: Records fast moving subjects clearly.
G SNOW: Compensates for subjects that may appear too
dark when shooting in extremely bright surroundings,
such as in snow.
SCENE SELECT
Adjusts the exposure and
shutter speed to suit your
surroundings or the subject.
/ SPOTLIGHT: Select this when a spotlight makes a
subject appear too bright.
[AUTO]: The focus is adjusted automatically.
3 MANUAL :
@ vV A : Adjusts the focus manually. (When zooming,
the subject will not go out of focus if you adjust the
focus at the telephoto (T) side before zooming to the
wide-angle (W) side.)
NFOCUS
Adjusts the focus.
! mode
@ [AUTO]: The brightness is adjusted automatically.
3 MANUAL :
–6 to + 6: Corrects the brightness within this range in
increments of 1.
g ADJUST BRIGHTNESS
Adjusts the brightness.
# mode
@ [AUTO]: The brightness is adjusted automatically.
3 MANUAL :
–2.0 to +2.0 (EV): Corrects the brightness within this
range in increments of 1/3EV.
! mode
@ [AUTO]: The shutter speed is adjusted automatically.
3 MANUAL :
1/2 to 1/4000: The smaller the value, the faster the
SHUTTER SPEED
9
shutter speed.
A fast shutter speed can freeze the
motion of a fast-moving subject,
and a slow shutter speed can blur
the subject to give the impression
of motion.
# mode
@ [AUTO]: The shutter speed is adjusted automatically.
3 MANUAL :
1/2 to 1/500: The smaller the value, the faster the shutter
speed.
NOTE
It is recommended to use a tripod when recording with a slow
shutter speed.
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Recording (Continued)
Menus
Settings: [ ] = Factory-preset
[AUTO]: White balance is adjusted automatically.
@
3 MANUAL :
B MWB: Adjusts the white balance manually depending on the
light source.
1) Hold a sheet of plain white paper in front
of the subject so that the white paper fills
the screen.
2) Keep touching the OK button until the
B indicator starts blinking then stops
blinking.
WB
WB
Adjusts the white balance
to achieve the optimum
colors for the amount of
light in your surroundings
during recording.
D FINE: When shooting outdoors on a sunny day.
E CLOUD: When shooting outdoors on a cloudy day.
F HALOGEN: When a video light or similar type of lighting is
used.
6 [WHOLE SCREEN]: Brightness is adjusted automatically for
whole screen.
PHOTOMETRY AREA
Enables you to adjust the
brightness in the desired
spot when backlight
compensation does not
work well.
7 SPOT: Brightness for the specified spot is adjusted
automatically.
[OFF]: No effect is used.
1
J SEPIA: The image has a brownish tint like old still images.
B/W MONOTONE: The image becomes black and white like old
movies.
w EFFECT
Enables you to record
videos or still images with
special effects.
L CLASSIC FILM*: This effect skips frames to give images of an
old movie atmosphere.
M STROBE*: The image looks like a series of consecutive
snapshots.
* ! mode only.
[OFF]: Disables the function.
ON: Activates the function.
1
0
t TELE MACRO
Enables you to shoot
a subject as large as
possible at a distance of
approx. 50 cm (1.64 ft).
NOTE
Set [TELE MACRO] to [OFF] if you will not take close-up still
images.
Non-close-up still images will be blurred if [TELE MACRO] is set to
[ON].
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Files on TV
This camcorder is designed to be used
with NTSC-type color television signals. It
cannot be used with a television of a different
standard.
Playback Operation
After the connection with TV is completed
1 Turn on the camcorder and the TV.
2 Set the TV to its VIDEO mode.
Connection with TV
LTo connect using the AV connector.
3 (Only when connecting the camcorder to
Preparation:
Turn off all units.
the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and
set the VCR/DVD recorder to its AUX
input mode.
DC
Connector
AC Adapter
4 Start playback on the camcorder.
To AC
Outlet
LTo display camcorder’s on-screen
display on TV
AV
Connector
AV
Cable
AV Input Connector
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING/PRINTING
Managing Files
CAUTION
Deleting Files
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium to use the medium again.
(Z pg. 62)
Protected files cannot be deleted. To delete
them, release the protection first.
Once files are deleted, they cannot be
restored. Check files before deleting.
•
•
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
playback mode.
•
Capture a Still Image from a Video
Touch MENU.
1
You can capture the desired scene from a
recorded video, and store it as a still image.
Select [DELETE]
2
VIDEO
Preparation:
DELETE
UPLOAD SETTINGS
SEARCH
• Slide the mode switch to select ! mode.
• Press the PLAY/REC button to select
playback mode.
PLAYBACK PLAYLIST
DELETE RECORDED VIDEO
SET
QUIT
Press SNAPSHOT when playback is
paused.
Deleting the Currently Displayed File
SNAPSHOT
After performing steps 1-2
Select [CURRENT].
3
VIDEO DELETE
CURRENT
FILE SELECT
DELETE ALL
NOTE
• Captured still images are stored at a
resolution of 640 x 360 (if the video was
recorded in 16:9) or 640 x 480 (if the video
was recorded in 4:3). The image can be
elongated in the horizontal or vertical
directions depending on the quality of the
source video file.
DELETE ONE SCENE AT
SET
A
TIME
QUIT
Select [YES].
4
DELETE?
(REMAINING SCENES:0009)
• The continuous shooting function cannot be
used to capture images.
YES
NO
• You cannot capture video during playback.
QUIT
SET
You can select the previous or next file by
selecting or
.
}
{
LTo quit the screen
Select [QUIT].
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Selected Files
Deleting All Files
After performing steps 1-2 (Z pg. 34)
After performing steps 1-2 (Z pg. 34)
Select [FILE SELECT].
Select [DELETE ALL]
3
3
VIDEO DELETE
CURRENT
VIDEO DELETE
CURRENT
FILE SELECT
FILE SELECT
DELETE ALL
DELETE ALL
SELECT AND DELETE SCENE
SET
DELETE ALL SCENES
SET
QUIT
QUIT
4 Select the desired file and select $.
4
Select [YES].
VIDEO DELETE
DELETE ALL?
VIDEO DELETE
1/2
(EXCEPT PROTECTED SCENE)
YES
NO
SD
SET
CHECK EXEC QUIT
The * mark appears on the file. To
select other files, repeat this step.
To check the content of the file, select
[CHECK].
•
•
LTo quit the screen
Select [QUIT].
Select [EXEC].
Select [YES].
5
6
VIDEO DELETE
DELETE SELECTED SCENES?
YES
NO
SET
QUIT
LTo quit the screen
Select [QUIT].
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Files (Continued)
Protecting Selected Files
Protecting Files
After performing steps 1-3
Preparation:
4
Select [FILE SELECT].
Slide the mode switch to select ! or #
mode.
•
•
PROTECT/CANCEL
CURRENT
FILE SELECT
Press the PLAY/REC button to select
playback mode.
PROTECT ALL
CANCEL ALL
SELECT AND PROTECT SCENE
SET
1
2
Touch MENU.
Select [EDIT].
QUIT
5
Select the desired file and select x.
VIDEO PROTECT
1/2
VIDEO
EDIT PLAYLIST
REC
DUBBING PLAYBACK
PLAYBACK MPG FILE
SD
EDIT
CHECK
QUIT
CAN BE SET TO PREVENT COPY
QUIT
SET
The x (protection) mark appears on the
file. To select other files, repeat this step.
To check the content of the file, select
[CHECK].
•
•
3
Select [PROTECT/CANCEL].
VIDEO
COPY
MOVE
RE
C
P
R
O
T
E
C
T
/C
ANCEL
6
7
Select [QUIT].
Select [YES].
T
RIMMING
PROTECT VIDEO FROM DELETION
QUIT
SET
VIDEO PROTECT
QUIT PROTECT?
Protecting the Currently Displayed File
After performing steps 1-3
YES
NO
SET
4
Select [CURRENT].
PROTECT/CANCEL
CURRENT
LTo release protection
Select the protected file in step 5.
FILE SELECT
PROTECT ALL
CANCEL ALL
PROTECT EACH SCENE
SET
QUIT
5
Select [YES].
PROTECT?
YES
NO
QUIT
SET
You can select the previous or next file by
selecting { or }.
LTo quit the screen
Select [QUIT].
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting All Files
Viewing File Information
Preparation:
After performing steps 1-3 (Z pg. 36)
For ! mode: Pause the playback.
Otherwise, select the file on the index
screen.
•
4
Select [PROTECT ALL].
PROTECT/CANCEL
For # mode: Play back the still image.
Alternatively, select the file on the index
screen.
•
CURRENT
FILE SELECT
PROTECT ALL
CANCEL ALL
PROTECT ALL SCENES
SET
QUIT
Press the INFO button.
DIRECT
DVD
VIDEO PLAYBACK
5
2/2
Select [YES].
VIDEO PROTECT
:MOV019.MOD
:PRG001
DATE/TIME : NOV.01.2009 04:55PM
FOLDER
PROTECT ALL?
PB TIME
:0:10:15
INFO
QUALITY :FINE
PROTECT :OFF
YES
NO
SET
FILE:
File name
•
FOLDER:
Folder name
•
LTo quit the screen
DATE/TIME:
•
Select [QUIT].
Date and time of the recording
PB TIME (!ꢀmode):
Playback time (length of the file)
SIZE (# mode):
LTo release protection of all files
1) In step 4, select [CANCEL ALL].
2) Select [YES].
•
•
•
•
Image size
QUALITY:
Video quality/Image quality (Z pg. 58)
PROTECT:
File protection status (Z pg. 36)
LTo turn off the file information display
Press INFO again.
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Files (Continued)
6
Select a new event.
To cancel the event registration, select
[CANCEL].
Changing the Event Registration
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
playback mode.
•
CHANGE EVENT REG.
•
1
SPORTS
CANCEL
1
1
1
SET
QUIT
1
2
Touch MENU.
Select [EDIT].
Changing the Event of the Selected
Files
VIDEO
EDIT PLAYLIST
REC
DUBBING PLAYBACK
After performing steps 1-3
PLAYBACK MPG FILE
EDIT
CAN BE SET TO PREVENT COPY
QUIT
SET
4
Select [SET RANGE AND CHANGE].
CHANGE EVENT REG.
3
Select [CHANGE EVENT REG.].
CURRENT
SET RANGE AND CHANGE
VIDEO
MOVE
P
REC
PROTECT/CANCEL
TRIMMING
D
E
SELECT MULTIPLE SCENES
SET
QUIT
CHANGE EVENT REG.
P
CAN SET OR CHANGE THE EVENT
QUIT
SET
5
Select the first file of the range.
CHANGED (FROM HERE)
1/2
Changing the Event of the Currently
Displayed File
1
1
1
1
SD
After performing steps 1-3
SET
CHECK
QUIT
To preview scenes, select the file and
select [CHECK].
4
Select [CURRENT].
CHANGE EVENT REG.
CURRENT
6
7
Select the last file of the range.
SET RANGE AND CHANGE
SELECT SCENES ONE BY ONE
SET
QUIT
Select a new event.
To cancel the event registration, select
[CANCEL].
5
Select the file you want to register.
CHANGE EVENT REG.
CHNAGE EVENT?
1
SPORTS
CANCEL
1
1
YES
NO
1
SET
QUIT
QUIT
SET
You can select the previous or next file by
selecting { or }.
LTo quit the screen
Select [QUIT].
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select [SET] at the end point.
Trimming Files
It is recommended to select [SET] after
the pause button is pressed.
You can select the necessary part of the video
and save it as a new video file.
TRIM (UNTIL HERE)
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
playback mode.
•
SET
•
S
E
0 : 08 : 05
QUIT
0 : 12 : 05
CANCEL
To cancel the start point setting, select
[CANCEL].
1
2
Touch MENU.
Select [EDIT].
Select [CAPTURE TRIMMED FILE].
VIDEO
SET
EDIT PLAYLIST
REC
DUBBING PLAYBACK
CAPTURE TRIMMED FILE
REDEFINE AREA
PLAYBACK MPG FILE
EDIT
S
E
0 : 08 : 05
QUIT
CAN BE SET TO PREVENT COPY
SET
0 : 12 : 05
QUIT
SET
To set the start/end point again, select
[REDEFINE AREA].
3
4
5
Select [TRIMMING].
VIDEO
COPY
P
8
9
Select [YES].
MOVE
REC
E
PROTECT/CANCEL
D
When copying is finished, the copied file is
added to the index screen.
TRIMMING
P
TO CAPTURE
SET
A
PARTICULAR
QUIT
Touch OK.
Select the desired file.
TRIMMING
1/2
LTo quit the screen
Select [QUIT].
SD
SET
QUIT
Select [SET] at the start point.
It is recommended to select [SET] after
the pause button is pressed.
TRIM (FROM HERE)
SET
S
E
0 : 12 : 05
QUIT
Use these controls to
locate the start point.
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playlists
It is a list that enables you to organize
recorded videos in order of preference.
5
6
Select the file to add to playlist.
NOV.01.2009
FROM SCENE
TOTAL
00h00m
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
playback mode.
•
•
SELECT
CHECK
QUIT
To preview scenes, select the file and
select [CHECK].
Creating Playlists
Touch MENU.
Select the insertion point.
1
2
NOV.01.2009
FROM SCENE
TOTAL
00h10m
Select [EDIT PLAYLIST].
VIDEO
DVD1
UPLOAD SETTINGS
SEARCH
SELECT SAVE CHECK
QUIT
PLAYBACK PLAYLIST
To add other files, repeat steps 5 and 6.
To delete a registered scene, select the
registered file, then select [CANCEL].
•
EDIT PLAYLIST
TO CREATE PLAYLIST ORDER
SET
•
QUIT
3
4
Select [NEW LIST].
7
8
Select [SAVE].
EDIT PLAYLIST
NEW LIST
Select [SAVE AND QUIT].
EDIT
DELETE
QUIT PLAYLIST.
SAVE EDITED CONTENTS?
CREATE NEW ORIGINAL VIDEO
SET
QUIT
SAVE AND QUIT
DELETE AND OUT
RETURN
Select an item and display files.
SET
NEW LIST
CREATE FROM SCENE
LTo quit the screen
CREATE BY DATE
CREATE BY GROUP
CREATE BY EVENT
Select [QUIT].
SELECT AND CREATE SCENE
NOTE
QUIT
SET
A maximum of 99 playlists can be created.
If you delete the original files, the
corresponding files are also deleted from
the playlist.
•
[CREATE FROM SCENE]:
Display all files individually.
[CREATE BY DATE]:
Display all the files listed by recording
date.
•
•
•
[CREATE BY GROUP]:
Display all files listed by group.
[CREATE BY EVENT]:
Search for an event and display the
corresponding files listed by recording
date.
•
•
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Playlists
Touch MENU.
Other Operations of Playlists
You can perform additional editing and delete
files in a created playlist.
1
2
Adding/Deleting Files in Playlist
Select [PLAYBACK PLAYLIST].
VIDEO
After performing steps 1-2 (Z pg. 40)
DELETE
UPLOAD SETTINGS
SEARCH
3
Select [EDIT].
PLAYBACK PLAYLIST
PLAY BACK ORIGINAL VIDEO IN
QUIT
SET
4
Select the playlist you want to edit.
To add or delete files, follow the steps 5 to
8. (Z pg. 40)
3
Select the playlist.
PLAYBACK PLAYLIST
01 NOV.01.2009 04:55PM
Deleting Playlist
02 NOV.01.2009 07:55PM
03 NOV.05.2009 10.40AM
04 NOV.20.2009 02:03PM
05 DEC.28.2009 11:15AM
CHECK
Original files are not deleted even if you
delete the playlist.
QUIT
After performing steps 1-2 (Z pg. 40)
LTo stop playback
Select L.
3
Select [DELETE].
LTo quit the screen
4
Select a playlist you want to delete.
Select [QUIT].
To delete all playlists at once, select
[DELETE ALL]
LTo play back from the desired scene
1) In step 3, select [CHECK]. (The index
screen for playlist appears.)
5
When [DELETE PLAYLIST?] appears,
select [YES].
2) Select the desired scene.
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING
Copying Files
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be
responsible for any lost data.
Copying/Moving Files
You can copy or move files between built-in
memory and SD card.
Types of Copying and Connectable Device
Preparation:
Slide the mode switch to select ! or #
•
•
•
•
mode.
Press the PLAY/REC button to select
playback mode.
Make sure that SD card is inserted in the
SD slot.
Make sure that enough free space is left in
the copy/move destination medium.
1
2
Touch MENU.
Select [EDIT].
DVD Burner
(CU-VD3/VD50)
You can copy video files
recorded on this camcorder
onto DVD discs.
VIDEO
EDIT PLAYLIST
REC
DUBBING PLAYBACK
PLAYBACK MPG FILE
EDIT
CAN BE SET TO PREVENT COPY
SET
QUIT
3
4
Select [COPY] or [MOVE].
PC
VIDEO
You can copy video/
still image files on this
camcorder onto your PC.
COPY
REC
E
MOVE
PROTECT/CANCEL
TRIMMING
D
P
COPY FILES BETWEEN
SET
QUIT
• [COPY]:
Files are copied to the destination
medium while leaving original files in the
source medium.
VCR/DVD Recorder
You can dub video files
recorded on this camcorder
onto DVD discs.
• [MOVE]:
Files are moved to the destination
medium while deleting original files in
the source medium.
NOTE
Select the direction.
It is recommended to use the JVC DVD
burner (CU-VD50/CU-VD3). When using
CU-VD20 or CU-VD40, the recording time
may take approx. 2 times longer than the time
that is described in the instruction manual of
DVD burner.
[BUILT-IN MEM } CARD] or [CARD
}BUILT-IN MEM]
COPY VIDEO
SELECT COPY DIRECTION
BUILT-IN MEM
CARD
CARD BUILT-IN MEM
QUIT
SET
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Select the desired menu.
Using a DVD Burner
COPY VIDEO
SELECT THE OBJECT
TO BE COPIED
Supported discs: 12cm DVD-R, DVD-RW
COPY ALL
SELECT AND COPY
Regarding DVD-R discs, only unused DVD-R
discs can be used. Regarding DVD-RW
discs, used DVD-RW discs can also be
used, but they need to be formatted before
recording. Formatting a disc deletes all
content recorded on the disc up until that
time.
•
•
QUIT
SET
• [COPY ALL]/[MOVE ALL]:
Select this to transfer all files in the
recording medium.
When the size of all files in the built-in
memory is larger than the free space
of the SD card, only the files that can
be contained in the free space will be
copied.
Dual-layer discs cannot be used.
Regarding finalization after copying
The disc is automatically finalized so that
it can be played on other devices. After
finalizing, the disc is a play-only disc, so no
more files can be added.
• [SELECT AND COPY]/[SELECT AND
MOVE]:
Select when you want to transfer the
selected files.
1) Select the desired file, and touch OK.
The s mark appears on the file. To
select other files, repeat this step.
2) Select [EXEC].
Connection with a DVD Burner
Preparation:
Turn on the camcorder first, then turn on the
DVD burner.
6
Select [YES].
COPY VIDEO
COPY QUANTITY:0016
START COPY?
DC
Connector
YES
NO
USB
QUIT
SET
Connector
C
D
File transfer starts. When [COPYING
COMPLETED] / [MOVING COMPLETED]
appears, touch OK.
LTo quit the screen
Select [QUIT].
To AC
Outlet
LTo stop the file transfer
1) Select [STOP].
USB
Cable*
AC Adapter
2) When [QUIT?] appears, select [YES].
DVD Burner
USB Connector
NOTE
Refer also to the optional DVD burner’s
instruction manual.
•
Use the USB cable that came with the DVD
burner.
*
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Files (Continued)
5
Select [EXECUTE].
Backup All Files
Preparation:
The files are copied on the disc. When
[COMPLETED] appears, touch OK.
•
Connect the camcorder to the DVD burner.
•
When [INSERT NEXT DISC PRESS
•
Slide the mode switch to select ! mode.
1
•
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining files are
copied on the second disc.
Select [CREATE FROM ALL].
CREATE DVD
To cancel copying, select [STOP].
•
CREATE FROM ALL
SELECT AND CREATE
CREATE DUPLICATE
PLAYBACK
Copying Video Files that Have Never
Been Copied
COPY RECORDED VIDEOS
SET
Files that have never been copied to the DVD
discs are automatically selected and copied.
2
Select the desired menu.
CREATE FROM ALL
ALL SCENES
1
Open the LCD monitor to turn on the
camcorder.
UNSAVED SCENES
COPY ALL VIDEOS TO DVD
SET
2
Press the DIRECT DVD.
[ALL SCENES]:
All files in the recording medium are
copied.
•
DIRECT
DVD
[UNSAVED SCENES]:
•
Files that have never been copied to a
DVD disc are automatically selected and
copied.
INFO
3
Select [EXECUTE].
3
4
Select the desired disc number.
DVD CREATION LIST
UNSAVED SCENES
READY TO CREATE
ALL(TOTAL:3)
DVD-R
DVD1
DVD2
DVD3
EXECUTE
RETURN
CHECK
QUIT
QUIT
SET
SET
If you select [ALL], all discs in the list are
created.
•
The DVD disc begins to be created.
When [COMPLETED] appears, touch
OK.
When [INSERT NEXT DISC PRESS
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining files are
copied on the second disc.
To cancel the DVD creation, select
[STOP].
•
•
To preview scenes, select [CHECK].
mark shows that the disc is created
already.
•
•
Select [YES] or [NO].
[YES]: Displays the thumbnails by group.
•
•
•[NO]: Displays the thumbnails by date.
LTo quit the screen
1) Select [QUIT].
2) When [QUIT?] appears, select [YES].
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Files for Backup
Preparation:
3
Select the desired disc number.
DVD CREATION LIST
ALL(TOTAL:3)
Connect the camcorder to the DVD burner.
•
DVD1
DVD2
DVD3
Slide the mode switch to select ! mode.
1
•
Select [SELECT AND CREATE].
CHECK
QUIT
SET
CREATE DVD
If you select [ALL], all discs in the list are
created.
To preview scenes, select [CHECK].
mark shows that the disc is created
already.
•
CREATE FROM ALL
SELECT AND CREATE
CREATE DUPLICATE
PLAYBACK
•
•
COPY PREFERRED VIDEOS
SET
4
5
2
Select [YES] or [NO].
• [YES] Displays the thumbnails by group.
• [NO] Displays the thumbnails by date.
Select the desired menu.
SELECT AND CREATE
CREATE BY DATE
CREATE BY EVENT
CREATE BY PLAYLIST
SELECT FROM SCENES
COPY GROUPED VIDEOS BY
SET
Select [EXECUTE].
The files are copied on the disc. When
[COMPLETED] appears, touch the OK.
•
[CREATE BY DATE]:
•
Files are sorted according to the date
on which they were recorded. Relevant
files are displayed in a list. Select the
recording date.
When [INSERT NEXT DISC PRESS
•
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining files are
copyed on the second disc.
[CREATE BY EVENT]:
•
To cancel copying, select [STOP].
•
Files are sorted according to event.
Relevant files are displayed in a list.
Select the event.
LTo quit the screen
1) Select [QUIT].
[CREATE BY PLAYLIST]:
2) When [QUIT?] appears, select [YES].
•
Select the desired playlist from the list
to playlist. The selected playlists are
displayed in a list.
NOTE
Incase of [CREATE BY PLAYLIST], date/time
on the file information display shows the
date of copying the file, instead of the actual
recording date.
1) Select the desired list.
2) Select the insertion point. To select
other lists, repeat this process.
3) Select [SAVE].
[SELECT FROM SCENES]:
Select files individually.
1) Select the desired file. To select other
files, repeat this process.
2) Select [SAVE].
LTo duplicate a disc
•
The last creation date is displayed. (Up to
20 files)
1) In step 1, select [CREATE DUPLICATE].
2) Select the date and go to step 5.
LTo check whether the DVD disc was
created properly
In step 1, select [PLAYBACK].
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Files (Continued)
LTo play back the created disc using the
camcorder
1) Connect the camcorder to the DVD
burner.
2) Turn on the camcorder first, than turn on
the DVD burner.
3) Select [PLAYBACK].
Digest Playback
You can play back a few seconds from each
select scene of the recorded videos in the
created DVD.
Create a DVD using a DVD burner (CU-VD50/
CU-VD3).
4) Select the desired folder.
5) Select the creation date of the disc.
6) Select the desired file. To return to the
previous screen, select @.
1
Load the created DVD on the DVD
player.
2
On the TV, Select [DIGEST
PLAYBACK]*.
LDisc number
Disc number shows the number of DVD
discs you can create. The dubbing range
of each disc is automatically allocated,
presuming that all the files are to be
dubbed from the first one on the list. This
dubbing range cannot be changed.
E.g.) “DVD1” can contain two files,
“JAN.01.2009” and “JAN.15.2009”.
1/2
NOV.01.2009 04:55PM
NOV.20.2009 02:03PM
NOV.02.2009 11:00AM
NOV.05.2009 10.40AM
DEC.15.2009 4:15PM
DEC.28.2009 11:15AM
DIGEST PLAYBACK
You can view the previous or next page by
selecting £ / ¤.
* The screen does not appear on the
camcorder.
DVD1
JAN.ꢅ01.ꢅꢀ00ꢈꢅꢅ0ꢈ:0ꢃAM
DVDꢀ JAN.ꢅ1ꢃ.ꢅꢀ00ꢈꢅꢅ0ꢈ:1ꢃAM
FEB.ꢅ01.ꢅꢀ00ꢈꢅꢅ0ꢈ:0ꢃAM
FEB.ꢅ0ꢇ.ꢅꢀ00ꢈꢅꢅ0ꢈ:1ꢃAM
3
The digest is played back
continuously.
LTitle and chapter of created DVD
Each recording date becomes one title in
a created DVD and each file recorded in a
same day becomes one chapter in the title.
LTo normal playback / To the index menu
1) Press the top menu button on the
remote control of the DVD device during
the digest playback.
JAN. 10. 2009: file 1 and 2 were recorded.
2) Select the desired item.
File 1
File 2
NOTE
JAN. 11. 2009: file 3 and 4 were recorded.
“Digest Playback” menu is not available
when DVD is burned using the provided
MediaBrowser software.
File 3
File 4
Create a DVD
Title
JAN.10.2009
JAN. 11.2009
File 1 File 2
File 3
File 4
1
2
3
4
Chapter
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation:
Creating a DVD using a PC
Load the provided CD-ROM into the PC.
In Windows Vista, the auto play dialog box
appears.
You can copy the data from the camcorder
and create a DVD using a PC.
1
Click [Easy Installation].
Q Installing the software to the PC
System Requirements
Windows Vista
Windows Vista®
OS:
Home Basic (SP1)
Home Premium (SP1)
(32-bit, pre-installed)
Follow the on-screen instructions.
Either one of the following:
CPU:
RAM:
2
Click [Next].
Intel® Pentium® 4, 1.6 GHz or higher
•
Intel® Pentium® M, 1.4 GHz or higher
•
Intel® CoreTM Duo, 1.5 GHz or higher
•
At least 1 GB
Windows XP
Windows® XP
OS:
Home Edition (SP2/SP3)
Professional (SP2/SP3)
(pre-installed)
3
Click [Finish].
Either one of the following:
CPU:
RAM:
• Intel® Pentium® 4, 1.6 GHz or higher
• Intel® Pentium® M, 1.4 GHz or higher
• Intel® CoreTM Duo, 1.5 GHz or higher
At least 512 MB
LTo check the PC specification
Right-click on [Computer] (or [My
Computer]) in the [Start] menu and select
[Properties].
Everio MediaBrowser icon is created on
the desktop.
NOTE
Make sure your PC has a recordable DVD
drive.
•
LTo see the Instruction Guide for Everio
MediaBrowser
1) Double-click the icon of Everio
MediaBrowser.
If your system does not meet the
requirements, it is recommended to copy
Macintosh users may use the software
included with their Macintosh (iMovie ‘08,
iPhoto) to copy files to their computer.
•
•
2) Click [Help], and click [MediaBrowser
Help].
Click
Click
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Files (Continued)
Everio MediaBrowser starts on the PC.
R Making Backup on the PC
Preparation:
Install the software to the PC.
Make sure that enough free space is left in
the PC’s HDD.
•
•
Close the LCD monitor to turn off the
camcorder.
•
3
4
Click [All volume in camcorder] and
click [Next].
DC
Connector
AC
Adapter
To AC
Outlet
C
D
Click [Start].
USB
Connector
USB Cable
Backup starts.
LTo disconnect the camcorder from the
PC
1) Right-click the icon (Safely Remove
Hardware) on the task bar and select
[Safely remove USB Mass Storage
Device].
USB Connector
1
2
2) Follow the on-screen instructions and
make sure that the device can be safely
removed.
3) Disconnect the USB cable and close
the LCD monitor.
Open the LCD monitor to turn on the
camcorder.
Select [BACK UP].
USB MENU
CREATE DVD
UPLOAD
NOTE
LIB.
EXPORT TO LIBRARY
It takes time to backup many videos.
BACK UP
SAVE RECORDED VIDEO/ STILL
QUIT
SET
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Double-click the recording date.
S Making User Lists to Arrange the
Files
You can make a user list of a certain subject
(such as Travel, Athletic meet) and put the
files related to the subject into the user list.
Preparation:
Make backup on the PC.
1
Double-click icon and open the
calendar.
The files recorded on the day are
displayed.
Drag the file and drop into the user
list.
2
Select [Movies only].
To add other files into the user list, repeat
steps 5 and 6
3
Click [+].
4
Input the name of the new user list
and click [OK].
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Files (Continued)
4
5
Input the disc name, select the top
menu style and click [Next].
T Copying Files to a DVD
Preparation:
Use a recordable DVD disc (It is
recommended to use a DVD-R disc.)
1
Select the user list and click [Create
Disc].
Click [Start].
2
Click [Select files individually] and
click [Next].
To add all the files onto DVD discs, click
[Select all files displayed], then go to
step 4.
NOTE
For detail on operating Everio
MediaBrowser, click [Help] and refer to
[MediaBrowser Help].
•
Adobe® Reader® must be installed to read
[MediaBrowser Help]. Adobe® Reader® can
be loaded from Adobe’s web site:
•
For assistance in operating the provided
software, refer to the support information.
•
3
Drag the file, and drop into the part
at the bottom and click [Next].
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Structure and Extensions
Recording medium
X = number
[DCIM]
Contains the still image folders.
Contains the video file folders.
[XXXJVCSO]
[SD_VIDEO]
[MGR_INFO]
[PRGXXX]
Management information* for the media as a
whole
Management information*
Video file
Management information* for the video files
[PRGXXX.PGI]
[MOVXXX.MOD]
[MOVXXX.MOI]
[PRGXXX]
[EXTMOV]
[MOV_XXX.MOD]
Video file which management information is
corrupted.
[PRIVATE]
Contains management information files of event
and/or DVD creation information for the files taken
with the camcorder.
* Information such as the date and time of recording, recorded with the video file.
ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Files (Continued)
Customer Support Information
Use of this software is authorized according to the terms of the software licence.
JVC
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide
software, please have the following information ready.
Product Name, Model, Problem, Error Message.
PC, (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB), Available Hard Disk
Space (GB)).
•
•
Please note that it may take some time to respond to your questions, depending on their subject matter.
JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or
performance of the OS, other applications or drivers.
Pixela
Region
Language
Phone #
USA and Canada
English
+1-800-458-4029 (toll-free)
Europe (UK, Germany,
France and Spain
English/Germany/France/Spanish
+1-800-1532-4865 (toll-free)
+44-1489-564-764
English/Germany/France/Spanish/
Italian/Dutch
Other Countries in Europe
Asia (Philippines)
China
English
+63-2-438-0090
Chinese
+86-21-5385-3786
Please check our website for latest information and downloading.
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Open the LCD monitor to turn on the
camcorder.
Dubbing Files to a VCR/DVD Recorder
Preparation:
Set the VCR/DVD recorder to its AUX
input mode.
Create a playlist.
Turn off all units.
•
•
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
LTo connect using the AV connectors
(analog dubbing)
DC
Connector
To AC
Outlet
AC Adapter
3
4
Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
AV Connector
AV Cable
AC
Refer to the VCR/DVD recorder’s
instruction manual.
Adapter
LTo stop dubbing
VCR/DVD
Recorder
Stop recording on the VCR/DVD recorder.
LTo hide the date or icons on the screen
Change the settings in [DISPLAY ON TV].
AV Connector
(Input)
To AC
Outlet
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with a Portable Media Player
Turning on the Export Mode
Changing the Export Setting
You can easily transfer videos recorded
in export mode to iTunes®. All the files with
the export setting turned on are transferred
to PC. For details on transferring, refer to
the operation guide of MediaBrowser in the
CD-ROM.
You can set the recorded videos to the export
setting.
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
playback mode.
•
•
Preparation:
1
Slide the mode switch to select ! mode.
Press EXPORT.
•
Press the PLAY/REC button to select
•
EXPORT
recording mode.
Press EXPORT twice.
EXPORT
ON
2
Select the file and select [LIB.].
EXPORT SETTINGS
1/3
LIB.
LIB.
LTo turn off the export mode
Press EXPORT twice.
SD
LIB.
CHECK
DONE
To check the content of the file, select
[CHECK].
•
3
Select [DONE].
LTo cancel the export setting
Select the file and press [LIB.] again.
LTo quit the screen
1) Select [DONE].
2) Select [YES].
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring the Files to PC
Preparation:
Install iTunes® on a PC.
1
Connect the camcorder to the PC
with the USB cable.
2
Select [EXPORT TO LIBRARY].
USB MENU
CREATE DVD
UPLOAD
LIB.
EXPORT TO LIBRARY
BACK-UP
EASY VIDEO REGISTRATION
SET
QUIT
All the files with the export setting turned
on are transferred to PC.
LCannot export the file to iTunes®
Refer to “Q&A”, “Latest Information”,
•
“Download Information”, etc. in [Click for
Latest Product Info] in the help of the
provided Everio MediaBrowser software.
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Uploading Files to Websites
Turning on the Upload Mode
Upload Trimming
You can upload the file to video sharing
websites (You TubeTM) quickly after recording.
For more information on YouTube™, visit
YouTube™ website: http://www.youtube.com/
You can select the necessary part of the
video and save it as a new video file ready for
uploading.
Preparation:
Preparation:
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
playback mode.
•
Slide the mode switch to select ! mode.
Press the PLAY/REC button to select
recording mode
•
•
•
1
2
Touch MENU.
Press UPLOAD twice.
UPLOAD
Select [UPLOAD SETTINGS].
ON
VIDEO
DELETE
UPLOAD SETTINGS
SEARCH
PLAYBACK PLAYLIST
If you record a file with the upload mode
set on, the recording stops automatically
10 minutes after the recording is started.
The remaining time is displayed on the
LCD monitor.
SELECT SCENE FOR UPLOADING
SET
QUIT
3
4
Select the desired file.
UPLOAD SETTINGS
1/2
NOTE
SD
The upload mode turns off each time
recording is finished.
SET
QUIT
Select [SET] at the start point.
TRIM (FROM HERE)
SET
S
E
0 : 12 : 05
QUIT
5
Select [SET] at the end point.
TRIM (UNTIL HERE)
SET
S
E
0 : 08 : 05
QUIT
0 : 12 : 05
CANCEL
•The duration between the start point and the
•Teondcapnocinetl cthaennsotatrbtepoloinntgseerttthinagn, 1se0lemcitnutes.
[CANCEL].
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select [CAPTURE TRIMMED FILE].
Uploading Files
SET
For detalis on uploading files, refer to the
operation guide of MediaBrowser in the CD-
ROM.
CAPTURE TRIMMED FILE
REDEFINE AREA
S
E
0 : 08 : 05
0 : 12 : 05
1
Connect the camcorder to the PC
with the USB cable.
SET
QUIT
To set the start/end point again, select
[REDEFINE AREA].
2
Select [UPLOAD].
USB MENU
Select [YES].
When copying is finished, the copied file is
added to the index screen.
PLAYBACK ON PC
CREATE DVD
UPLOAD
EXPORT TO LIBRARY
EASY UPLOAD TO VIDEO
SET
QUIT
LTo quit the screen
Select [QUIT].
LCannot upload the file toYouTube™
You need your YouTube™ account to
•
upload files to YouTube™. Create your
account.
Refer to “Q&A”, “Latest Information”,
•
“Download Information”, etc. in [Click for
Latest Product Info] in the help of the
provided Everio MediaBrowser software.
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
Changing the Menu Settings
1
Touch MENU.
LTo return to the previous screen
Select @.
2
Select the desired menu.
LTo quit the screen
Select [QUIT].
VIDEO
REGISTER EVENT
VIDEO QUALITY
ZOOM
ON
DIS
IMAGE BLURRED NEED TO
SET
QUIT
3
Select the desired setting.
VIDEO
R
OFF
V
ON
ON
Z
D
IMAGE BLURRED NEED TO
SET
QUIT
Mode
Menus
Settings: [ ] = Factory-preset
See page 30. (In the manual recording mode only)
!
!
!
#
#
ꢀ
MANUAL SETTING
D LIGHT
m REGISTER EVENT
[OFF] / 2SEC / 10SEC
NOTE
z SELF-TIMER
You can confirm the countdown on the camcorder
ꢀꢀ
#
•
Starts recording when the
set time elapses after the
SNAPSHOT button is pressed.
screen.
It is recommended to attach the camcorder to
•
a tripod and use this function to prevent the
vibration after SNAPSHOT is pressed.
[RECORD ONE SHOT]:
Records one still image at a time.
CONTINUOUS SHOOTING:
Records still images continuously while
SNAPSHOT is pressed.
8 SHUTTER MODE
Records still images
continuously while SNAPSHOT
is pressed.
ꢀꢀ
#
NOTE
The interval between recording still images is
•
approx. 0.3 seconds.
Continuous shooting may not work well
•
depending on the recording medium.
The continuous shooting speed will drop if this
•
function is used repeatedly.
n VIDEO QUALITY
!
ꢀ
[ULTRA FINE] / FINE / NORMAL / ECONOMY
Sets the picture quality.
n IMAGE QUALITY
ꢀ#
[FINE] / STANDARD
Sets the picture quality.
ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode
Menus
Settings: [ ] = Factory-preset
35X/OPTICAL / 40X/DYNAMIC* / [80X/
DIGITAL] / 800X/DIGITAL
* Dynamic zoom
The combination of optical and digital zoom
technology offers higher zoom ratio than optical
zoom without reducing the quality.
@ ZOOM
!
ꢀ
Sets the maximum zoom ratio.
NOTE
Optical zoom is used up to [35X/OPTICAL]. Digital
zoom is used from more than [35X/OPTICAL] up to
the selected zoom ratio.
OFF: Deactivates the function.
[ON]: Activates the function.
NOTE
q DIS
Complete stabilization may not be possible if
hand shake is excessive, or depending on the
shooting conditions.
Switch off this mode when recording with the
camcorder on a tripod.
•
!
!
!
ꢀ
Compensates for hand shake.
•
OFF: Deactivates the function.
AGC: Electrically brightens the scene in dark
place.
[AUTO]*: Automatically brightens the scene
when it is dark. (Becomes brighter
than [AGC]. The motion of a subject
may look unnatural if recorded in some
condition.)
* !ꢀmode only
[16:9]: Records videos in 16:9 size.
4:3: Records videos in 4:3 size.
GAIN UP
ꢀꢀ
Makes the subject appear bright
ꢀ# automatically when you record in
dark places. However, the overall
color tones appear greyish.
NOTE
! SELECT ASPECT RATIO
If the [VIDEO QUALITY] is set to [ECONOMY],
you cannot record in 16:9 size.
If you want to copy the recorded videos onto
DVD discs, it is recommended not to mix 16:9
size videos and 4:3 size videos.
•
ꢀ
Selects the aspect ratio for
videos.
•
[OFF]: Deactivates the function.
ON: Activates the function.
o WIND CUT
!
!
Reduces noise caused by wind.
OFF: Deactivates the function.
[ON]: Activates the function.
The switching time of the SD card and built-in
memory requires approximately 3 seconds. If there
are many videos and data in the SD card, it might
take up to a few minutes to perform the switch. No
video is recorded during that time.
AUTO SWITCH REC
MEDIA
Switches recording media
automatically from Built-in
Memory to SD card and vice
versa after the the recording
medium in use is full.
ꢃꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Menu Settings (Continued)
Settings: [ ] = Factory-preset
Menus
Select [ON-SCREEN DISPLAY] on Video
Playback or Image Playback Mode.
OFF / [DISPLAY ALL] / DISPLAY DATE ONLY /
DISPLAY DATE 5 SEC.
l ON-SCREEN DISPLAY
Displays indication modes on LCD
monitor.
Select [DISPLAY SETTINGS], then select sub-menus.
DISPLAY SETTINGS
9 LANGUAGE
[ENGLISH]
Enables you to set the display
language.
: CLOCK ADJUST
Sets the time.
DATE STYLE:
[month.day.year] / year.month.day / day.month.year
TIME:
24h / [12h]
; DATE DISPLAY STYLE
Sets the date and time display
format.
B MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
Adjust the brightness of the display by using the touch
sensor.
BRIGHTER: Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD: Select this when saving the battery life.
[AUTO]: The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors (when using
the battery pack).
C MONITOR BACKLIGHT
Enables you to adjust the
brightness of backlight on the
monitor.
Select [BASIC SETTINGS], then select sub-menus.
Y BASIC SETTINGS
OFF: Deactivates the function.
[ON]: Activates the function.
NOTE
[ DEMO MODE
Introduces special features of
the camcorder when there is no
operation for about 3 minutes
during recording mode.
• The demonstration only works when the AC adapter is
connected, not with the battery pack.
• If an SD card is in the camcorder, demonstration will not
take place even if this mode is set to [ON].
OFF: Deactivates the function.
[ON]: Activates the function.
( AUTO POWER OFF
If the camcorder is not operated for
5 minutes while the power is on,
it turns itself off automatically to
conserve power.
To turn the camcorder on again, close the LCD
monitor and open it again when using the battery
pack. When using the AC adapter, perform any
operation such as zooming.
OFF: Turns off the operation sound.
[ON]: The melody sounds when any operation is
performed.
\ OPERATION SOUND
Turns the operation sound on/off.
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: [ ] = Factory-preset
OFF: Deactivates the function.
Menus
RECORD BUTTON
Enables the recording button [REC]
on the LCD monitor.
[ON]: Activates the function.
OFF: Deactivates the function.
& QUICK RESTART
[ON]: If the LCD monitor is opened again within 5
minutes, the camcorder starts quickly. The power
consumption used for the 5 minute period after the
LCD monitor is closed is approximately 1/3 of that used
during recording. This enables you to save more power
than leaving the power on.
Enables the camcorder to start
up quickly when you turn off the
camcorder and then on again
within 5 minutes by closing and
opening the LCD monitor.
] REMOTE
OFF: Does not receive the signal from the remote
control.
[ON]:Enables operation with the remote control.
Turns on/off reception of the
operation signal from the remote
control.
YES: Performs this function.
[NO]: Cancels this function.
NOTE
UPDATE
Updates and improves the system
software.
Information about obtaining system update will be made
available on the JVC’s web site.
YES: Performs the function.
NO: Returns to the menu screen without executing
Z FACTORY PRESET
Returns all the camcorder settings
to their default values.
reset.
Select [CONNECTION SETTINGS], then select sub-menus.
CONNECTION SETTINGS
% DISPLAY ON TV
[OFF]: Does not display on TV.
ON: Displays on TV.
Displays camcorder’s on-screen
display on a TV screen.
ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Menu Settings (Continued)
Settings: [ ] = Factory-preset
Menus
VIDEO OUTPUT
Sets the aspect (16:9/4:3) to the
screen of the connected television
when outputting videos from the AV
connector.
4:3 / [16:9]
Select [MEDIA SETTINGS], then select sub-menus.
MEDIA SETTINGS
REC MEDIA FOR VIDEO
Sets the recording medium for
video.
[BUILT- IN MEMORY] / SD CARD
REC MEDIA FOR IMAGE
Sets the recording medium for still
images.
[BUILT - IN MEMORY] / SD
[FILE]: Initializes all files in the BUILT-IN MEMORY.
FILE + MANAGEMENT NO:
FORMAT BUILT- IN MEM.
Ensures stable speeds and
operation when accessing the
BUILT- IN MEMORY.
Initializes all files and management numbers in
the BUILT-IN MEMORY.
NOTE
• Be aware that all files and data including protected files
will be erased by the formatting process.
[FILE]: Initializes all files in the SD card.
FILE + MANAGEMENT NO:
, FORMAT SD CARD
You have to format newly
purchased SD cards with this
camcorder before using them.
This will also ensure stable speeds
and operation when accessing the
SD card.
Initializes all files and management numbers in
the SD card.
NOTE
• Be aware that all files and data including protected files
will be erased by the formatting process.
YES: Performs this function. Select [OK] when
completed.
[NO]: Cancels this function.
ERASE BUILT- IN MEM.
When you dispose of the
camcorder, perform this to make
it difficult to recover data on the
BUILT-IN MEMORY.
NOTE
• In addition to this operation, it is recommended that you
use a commercially available data erasing software to
eliminate the risk of data recovery.
ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
FURTHER INFORMATION
Troubleshooting
Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC’s website.
The following phenomena are not
malfunctions.
The camcorder heats up when it is used
for a long time.
•
The battery heats up during charging.
When playing back a video file, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
•
•
LCD monitor momentarily become red or
black when sunlight is recorded.
•
Black spots, or red, green, or blue
•
spots appear on the LCD monitor. (The
LCD monitor contains 99.99% effective
pixels, but 0.01% of fewer pixels may be
ineffective.)
Trouble
Action
Connect the AC adapter securely.
•
•
•
No power is supplied.
Recharge the battery pack.
After the low
When the camcorder has warmed up after being cold, the
camcorder may switch itself off to check it is operating correctly.
Turn on the camcorder again to start using it.
temperature message
is displayed, the power
turns off when the
camcorder warms up.
Fully charge the battery pack, run it down, and then recharge it
again.
If the camcorder is used for long periods of time in high or low
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
•
•
The remaining battery
display is not correct.
The LCD monitor may be difficult to see if used in bright areas
such as under direct sunlight.
•
The LCD monitor is
difficult to see.
ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble
Action
SD Card or Built-In Memory is full. Delete unnecessary files or
replace the SD Card.
Recording cannot be
performed.
•
•
Insert a commercially available SD card, and set each of the [REC
MEDIA FOR VIDEO] to [SD Card] and [REC MEDIA FOR IMAGE] to
[SD].
Recording stops by
itself.
Recording stops automatically after 12 hours of continuous recording.
•
Use backlight compensation.
•
•
•
•
Set [GAIN UP] to [AGC] or [AUTO].
Use [NIGHT] from scene select.
Set the brightness to the [+] side.
The recorded subject is
too dark.
Set the brightness to the [–] side.
Set the backlight compensation to off if it is being used.
The recorded subject is
too bright.
•
•
Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL].
Digital zoom is not available in the still image recording mode.
Digital zoom does not
work.
•
•
Wipe the lens with lens cleaning cloth.
If you are recording in a dark place or a subject that has no
contrast between dark and light, adjust the focus manually.
•
The focus is not
adjusted automatically.
•
Set [WB] in [MANUAL SETTING] appropriately to the light source.
Select [MWB] in [WB] while holding a sheet of plain white paper in
front of the camcorder so that the white paper fills the screen.
Keep touching OK until the B indicator appears.
•
•
The color looks strange.
(Too bluish, too reddish,
etc)
This cannot be used if [SEPIA] or [MONOTONE] are selected as
effects.
•
•
White balance setting
cannot be activated.
Do not use [TWILIGHT] from scene select.
The continuous shooting speed will drop after continuous shots.
Continuous shooting speed may drop depending on the recording
media or under certain recording conditions.
•
The continuous shooting
speed is slow.
•
This occurs when there is a bright light source near the camcorder.
This is not a malfunction. Change the direction of the camcorder to
prevent the light source comes into view.
Band of bright light
appears on the LCD
monitor.
•
Sometimes playback is interrupted at the connecting section
between two scenes. This is not a malfunction.
Sound or video are
interrupted.
•
•
Select [PLAYBACK MPG FILE] then search the video on the index
screen.
(Video files that have damaged management information can be
played back.)
Cancel group display and date search functions.
Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
FOR IMAGE]. (Files on other media are not displayed.)
Slide the mode switch to select the desired mode (! or #).
The following functions cannot be used for a backup DVD.
When playing back video
- Search index by date
Cannot find a recorded
video/image.
•
•
•
•
Some functions cannot
be used when playing
back a backup DVD
through a DVD burner
connected to the
- Playback effects
When playing back still image
- Playback effects
camcorder.
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble
Action
The camcorder
If there are many files (such as video) in the camcorder, it takes
time for the camcorder to respond. It is recommended that you
copy all files from the camcorder onto your computer, and erase
the files from the camcorder.
•
operates slowly when
switching between
video mode and still
image mode, or when
switching the power on
or off.
The lamp does not
flash during battery
pack charging.
Check the remaining battery pack charge.
•
•
(When the battery pack is fully charged, the lamp does not flash.)
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery pack is being recharged outside the permitted
temperature range, recharging may stop to protect the battery
pack.)
The remote control
does not work.
Replace the battery.
•
•
•
Set [REMOTE] to [ON].
The remote control may not operate outdoors or in places
exposed to strong light.
Cannot upload the file
toYouTube™
You need your YouTube™ account to upload files to YouTube™.
Create your account.
Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
•
•
Cannot export the file
to iTunes®
Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
•
LTo reset the camcorder when it does not operate normally
!Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Indications
Indication
Action
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult
your nearest JVC dealer.
•
SET DATE/TIME!
Be sure to use JVC battery packs.
COMMUNICATING ERROR
NOT FORMATTED
•
•
Select [OK] and select [YES] to perform formatting.
Check the operating procedure, and perform once again.
Turn off the camcorder, and turn it on again.
FORMAT ERROR!
•
•
DATA DELETION ERROR
Turn off the camcorder, and turn it on again.
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
•
•
BUILT-IN MEMORY ERROR!
MEMORY CARD ERROR!
Turn off the camcorder, and turn it on again.
Remove and re-insert the SD card (MultiMediaCard cannot be
used).
Remove any dirt from the SD card terminals.
Insert the SD card before switching the power on.
Turn off the camcorder, and turn it on again.
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
•
•
•
•
•
•
Stop video recording, and then record a still image. (If an SD
card is removed or inserted during video recording, a still
image cannot be recorded.)
•
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
Set [REC MEDIA FOR VIDEO] to [SD Card], then record to an
SD card.
Turn off the camcorder and then turn it on again.
•
•
RECORDING CANCELLED
Turn off the camcorder, and turn it on again.
Use the AC Adapter as power supply.
RECORDING FAILURE
USE AC ADAPTER
•
•
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication
Action
Select [OK] to restore.
VIDEO MANAGEMENT FILE
IS DAMAGED, RECOVERY
IS REQUIRED TO RECORD/
PLAYBACK, RECOVER?
•
Use files recorded with the camcorder. (Files recorded with
other device may not be played back.)
•
•
UNSUPPORTED FILE!
THIS FILE IS PROTECTED
INSUFFICIENT SPACE
Switch off the [PROTECT/CANCEL] function in the MENU.
Delete files. Move files to a PC or other device.
Replace the SD card with a new one.
•
•
Replace the backup destination with another disc.
NUMBER OF FOLDERS
OVERFLOW
•
•
•
Move the files or folder to a PC or other device, and then
format the SD card.
Select [FILE + MANAGEMENT NO] in [FORMAT BUILT- IN
MEM.] or [FORMAT SD CARD].
UPPER LIMIT OF RECORDABLE
NUMBER OF FOLDERS/
FILES HAS BEEN REACHED
SCENE QUANTITY
LIMIT EXCEEDED
When creating a DVD, reduce the number of playlists to be
saved.
Reduce the number of the playlist to 99 files or less.
•
•
•
PLAYLIST QUANTITY
EXCEEDS LIMIT
Delete the playlist, and then create a new one.
NO REGISTERED SCENES
IN PLAYLIST SOME OF
SCENES MAY NOT BE
PLAYED BACK
Turn on the power of the connected USB device.
Connect the AC adapter to the DVD burner.
POWER IS OFF, OR USB
DEVICE IS UNSUPPORTED
•
•
Replace the disc of the DVD burner with another disc.
(A DVD-RW disc can be initialized.)
DVD-RW DISC HAS BEEN
ALREADY USED
•
Replace the disc of the DVD burner with another disc.
FINALIZATION FAILED
NO FILES
•
Slide the mode switch to select the desired mode (! or #).
•
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
LTo clean the exterior
Wipe gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted
mild soap and wring it out well before wiping. Then wipe again with a dry cloth.
LTo clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.
LTo clean the lens
Wipe gently with lens cleaning paper.
NOTE
Avoid using strong cleaning agents such as benzine or alcohol.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
•
•
•
ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
LFor video/Audio
Format
Camcorder
SD-VIDEO
LFor general
Recording/Playback format
Video: MPEG-2
Audio: Dolby Digital (2 ch)
Signal format
NTSC standard
Power supply
DC 11 V (Using AC adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 1.8 W*
Recording mode (video)
ULTRA FINE: 720 x 480 pixels, 8.5 Mbps (VBR)
FINE: 720 x 480 pixels, 5.5 Mbps (VBR)
NORMAL: 720 x 480 pixels, 4.2 Mbps (VBR)
ECONOMY: 352 x 240 pixels, 1.5 Mbps (VBR)
Recording mode (audio)
ULTRA FINE: 48 kHz, 384 kbps
FINE: 48 kHz, 384 kbps
NORMAL: 48 kHz, 256 kbps
ECONOMY: 48 kHz, 128 kbps
LFor still image
* When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Rated Current Consumption: 1A
Dimensions (W x H x D)
54.5 mm x 65 mm x 112.5 mm
(2-1/8”x2-9/16”x4-7/16”)
Weight
Approx. 245 g (0.54 lbs)
(incl. grip belt)
Approx. 290 g (0.64 lbs)
(incl. battery and grip belt)
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
35% to 80%
Storage temperature
–20°C to 50°C (–4°F to 122°F)
Pickup
1/6" (800,000 pixels) CCD
Lens
Format
JPEG
Image size
832 x 624
Picture quality
FINE/STANDARD
LFor connectors
AV output
Video output: 1.0 V (p-p), 75 Ω
Audio output: 300 mV (rms), 1 kΩ
USB
F 1.8 to 4.0, f = 2.2 mm to 77.0 mm,
35:1 power zoom lens
Filter diameter
Mini USB type A and B, USB 2.0 compliant
ø30.5 mm
LCD monitor
2.7" diagonally measured, LCD panel/TFT
active matrix system
AC Adapter
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
LED Light
Within 1.5 m (4.9 ft)
(recommended shooting distance)
DC 11 V
, 1 A
§
ꢄꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
Dimensions (W x H x D)
42 mm x 14.5 mm x 91 mm
(1-11/16” x 5/8” x 3-5/8”)
Weight
Approx. 30 g (0.07 lbs)
(incl. battery)
Remote Control
Power supply
DC 3 V
Battery life
Approx. 1 year
(depending on the frequency of use)
Operating distance
Within 5 m (16.4 ft)
Operating temperature
0°C to 40°C (32 F° to 104° F)
Design and specifications subject to change
without notice.
Approximate recording time (for video)
Recording
medium
SD or SDHC Card
256 MB 512 MB
3 min. 6 min.
1 GB
2 GB
4 GB
1 hr.
8 GB
16 GB
32 GB
Quality
ULTRA FINE
FINE
14 min.
21 min.
29 min.
29 min.
43 min.
1 hr.
1 hr. 50 min. 3 hr. 45 min. 7 hr. 30 min.
5 min. 10 min.
6 min. 13 min.
1 hr. 20 min. 2 hr. 50 min. 5 hr. 40 min. 11 hr. 20 min.
1 hr. 50 min. 3 hr. 45 min. 7 hr. 30 min. 15 hr. 00 min.
NORMAL
ECONOMY
18 min. 36 min. 1 hr. 20 min. 2 hr. 30 min.
5 hr.
9 hr. 55 min. 20 hr. 00 min. 40 hr. 00 min.
Recording medium
Built-In Memory
16 GB
Quality
ULTRA FINE
FINE
3 hr. 45 min.
5 hr. 40 min.
7 hr. 30 min.
20 hr. 00 min.
NORMAL
ECONOMY
Approximate number of storable images (for still image)
The Built-In Memory can record up to 9999 still images in either mode.
Recording medium
Image size/Quality
SD or SDHC Card
Mode
256 MB 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB 32 GB
640 x 480 / FINE
640 x 480 / STANDARD
832 x 624 / FINE
1450
2080
970
2920
4180
1950
2920
3660
4880
5930 9999 9999
8480 9999 9999
3950 7590 9999
5930 9999 9999
7420 9999 9999
9890 9999 9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
9999
!
#
!
4:3
4:3
832 x 624 / STANDARD
640 x 360 / FINE
1450
1820
2420
16:9
640 x 360 / STANDARD
The recordable time and the number of still images are approximate and may differ depending on the
recording environment, the condition of the SD card, or the remaining battery power.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
ATTENTION:
The battery you
AC Adapter
have purchased is
recyclable. Please call
1-800-8-BATTERY for
information on how to
recycle this battery.
When using the AC adapter in areas other
than the USA
The provided AC adapter features automatic
voltage selection in the AC range from 110 V to
240 V.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to
an AC wall outlet other than American National
Standard C73 series type use an AC plug
adapter, called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest
JVC dealer.
Recording Medium
Be sure to follow the guidelines below
to prevent corruption or damage to your
recorded data.
Do not bend or drop the recording medium, or
subject it to strong pressure, jolts or vibrations.
•
Plug Adapter
•
Do not splash the recording medium with water.
Do not use, replace, or store the recording
medium in locations that are exposed to strong
static electricity or electrical noise.
•
•
Battery Packs
Do not turn off the camcorder power or remove
•
the battery or AC adapter during shooting,
playback, or when otherwise accessing the
recording medium.
Do not bring the recording medium near objects
that have a strong magnetic field or that emit
strong electromagnetic waves.
Do not store the recording medium in locations
with high temperature or high humidity.
Do not touch the metal parts.
The supplied battery
Terminals
pack is a lithium-ion
battery. Before using
the supplied battery
pack or an optional
battery pack, be sure
to read the following
cautions:
•
•
•
To avoid hazards
•
LCD Monitor
... do not burn.
... do not short-circuit the terminals. Keep it away
from metallic objects when not in use. When
transporting, make sure the provided battery
cap is attached to the battery. If the battery
cap is misplaced, carry the battery in a plastic
bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
... use only specified chargers.
To prevent damage to the LCD monitor, DO
NOT
•
... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on the
bottom.
•
To prolong service life
... avoid rubbing it with coarse cloth.
To prevent damage and prolong service life
•
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C (50°F to 95°F). This is a chemical
reaction type battery — cooler temperatures
impede chemical reaction, while warmer
temperatures can prevent complete charging.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
ꢆ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions (Continued)
Declaration of Conformity
Model Number: GZ-MS130U
Main Unit
Trade Name: JVC
For safety, DO NOT
•
Responsible party: JVC AMERICAS CORP.
Address: 1700 Valley Road Wayne, N. J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
... open the camcorder’s chassis.
... disassemble or modify the unit.
... allow inflammables, water or metallic objects
to enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
... place naked flame sources, such as lighted
candles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to the
power plug or an AC wall outlet.
Changes or modifications not approved
by JVC could void the user’s authority to
operate the equipment. This equipment has
been tested and found to comply with the
limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures: Reorient or relocate the receiving
antenna. Increase the separation between the
equipment and receiver.
... insert any objects in the camcorder.
Avoid using the unit
•
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as
near a cooking stove.
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
DO NOT leave the unit
•
... in places of over 50°C.
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the
unit in high places while a cable is connected
may result in a malfunction if the cable is
caught and the unit falls onto the floor.
To protect the unit, DO NOT
•
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration
during transportation.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively when using the hand
strap.
... swing the soft camcorder case excessively
when the camcorder is inside it.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
To prevent the unit from dropping,
•
Fasten the grip belt securely.
•
When using the camcorder with a tripod, attach
•
the camcorder to the tripod securely.
If the camcorder drops, you may be injured
and the camcorder may be damaged.
When a child uses the unit, there must be
parental guidance.
ꢆꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
ꢆꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms
A AC Adapter ................................................. 18, 71
Adjust Brightness .............................................. 31
Auto Power Off .................................................. 60
Operation Sound................................................ 60
Battery Pack .......................................... 13, 18, 71
Built-In Memory........................................ 21,62,66
Playlist ............................................................... 40
Portable Media Player ....................................... 54
Protecting Files ................................................. 36
Clock Adjust ...................................................... 19
Copying Files .................................................... 42
Q Quick Restart .................................................... 61
Quick Review .............................................. 22, 23
Date Display Style ............................................ 60
Deleting Files .................................................... 34
Digest Playback ........................................... 26, 46
Demo Mode ...................................................... 60
Digital Image Stabilizer (DIS) ............................ 59
Display on TV .................................................... 61
DVD Backup ................................................ 44, 45
DVD Burner ....................................................... 43
R Recordable Time ............................................... 70
Record Button.................................................... 61
Recording Medium............................................. 71
Remaining Battery Power .................................. 24
Remaining Recording Time ............................... 22
Remote Control................................ 13, 14, 15, 61
Select Aspect Ratio ........................................... 59
Self-Timer .......................................................... 58
Shutter Mode ..................................................... 58
Shutter Speed.................................................... 31
Speaker Volume................................................. 26
Event Registration.............................................. 25
Export to Library Mode ...................................... 55
File Search......................................................... 28
Finalize .............................................................. 43
Format SD Card................................................. 62
Uploading Files ................................................. 56
I
Image Quality .................................................... 58
Wind Cut ........................................................... 59
LCD Monitor ................................................ 16, 71
LED Light .......................................................... 24
Menu Settings.................................................... 58
Monitor Backlight ............................................... 60
Monitor Bright .................................................... 60
Moving Files....................................................... 42
US
© 2008 Victor Company of Japan, Limited
1208YDR-YG-MD
Download from Www.Somanuals.com. All Manuals Search And Download.
|