Jasco Universal Remote RM24965 User Manual

RM24965  
Universal Remote  
Instruction Manual  
SAT  
TV  
DVD  
AUX  
VCR  
CBL  
OK  
MENU  
SLEEP  
EXIT  
LAST  
GUIDE  
TITLE  
INFO  
2 3  
4 5 6  
7 8 9  
TV/VCR  
ENTER  
INPUT  
0
SCAN-  
PLAY  
SCAN+  
STOP  
RECORD  
PAUSE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions, cont.  
Button Functions  
Some buttons on the remote might have functions that  
are referred to by different names on the device you are  
controlling. E.G. LAST may be called RECALL, or  
ENTER may be called DISPLAY. These differences  
depend on the brand and model of your product. Also,  
this remote can only operate features that exist on your  
product. E.G., your product must have LAST ability for  
the LAST button to operate this feature.  
ON-OFF Turns  
product On or  
Off.  
CODESEARCH  
For setup.  
CHANNEL Up/Down  
Changes the channels  
SKIP +/- controls DVD/  
CD track selection i.e.  
DVD/CD Track Skip Up/  
Down (in DVD and CD  
modes).  
TV, VCR, etc.  
Red Indicator  
Selects product  
to be operated.  
Lights when any  
button is pressed.  
MUTE Turns off the  
TV sound while the  
picture remains.  
OK Selects menu  
items for the device  
you are controlling.  
VOLUME UP/DOWN  
LAST Returns to  
the previously selected  
channel,  
Changes the volume  
level of the product,  
normally the TV.  
GUIDE displays satellite or  
cable on-screen program  
guide.  
EXIT Exit On-Screen Menus  
and/or Return to previous  
On-Screen selection.  
INFO button brings up DVD  
Display or Control Menu  
for Chapter/Track/Title  
number, Time remaining/  
elapsed indication, system  
information, etc.  
MENU  
Selects the on-screen menu.  
SLEEP enables the  
remote to turn off your  
TV after a period of 1  
to 99 minutes.  
NUMBERS  
Enter numbers for direct  
channel selection. Some  
products require ENTER  
to be pressed after  
ENTER  
For some TV models,  
used after direct  
channel number  
entry to immediately  
change to the  
channel selection.  
TV/VCR/INPUT  
For some TVs, press repeat-  
edly to select from available  
viewing sources (antenna,  
cable box, VCR, etc.).  
selected channel.  
RECORD, PLAY, STOP,  
REW, FF, PAUSE VCR  
control buttons operate  
your VCR even when the  
remote is set to operate the  
TV. Also operates DVD  
Scan -/+. Note the VCR  
keys also control DVD  
Note: The REC button must be pressed TWICE to  
record from your VCR. For some brands of VCRs, you  
might need to press the REC button once, then press it  
again for three seconds.  
4
5
when in DVD Mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Functions  
Direct Code Entry  
This remote has several dedicated buttons used for  
DVD functions. The descriptions may vary from your  
original remote descriptions.  
SCAN+ and SCAN- buttons control the speed of  
Fast Forward and Reverse Playback respectively.  
SKIP (Channel Up & Down) buttons respectively  
locate the succeeding or preceding Chapters or  
Tracks on a disc.  
1. Press and hold the CODE SEARCH  
button until the red indicator stays on,  
then release the CODE SEARCH  
button.  
2. Press and release the desired mode  
button (TV, VCR, etc.). The red indicator  
blinks, then stays lit.  
INFO button brings up DVD Display or Control  
Menu for Chapter/Track/Title number, Time remain-  
ing/elapsed indication, system information, etc.  
MENU brings up the DVD disc Menu screen - use  
with the UP, DOWN, LEFT & RIGHT navigation  
buttons.  
OK button is used for on-screen Menu selection.  
Note some DVD players require the Play button to  
be used.  
3. Enter the 4 digit code  
from the code tables  
(on separate sheet).  
Note: after a valid code  
entry, the red indicator  
turns off. For an invalid  
code, the red indicator  
flashes.  
EXIT Exit On-Screen Menus and/or Return to  
previous On-Screen selection.  
PLAY button is used to start Disc playback and for  
Menu selection on some DVD players.  
STOP button stops Disc playback.  
PAUSE button pauses Disc playback - press PLAY  
to resume.  
TITLE (GUIDE) Brings up the DVD Title Menu  
screen.  
INPUT brings up the DVD Players Setup Menu.  
Note, not all DVD Players support all the functions  
described above.  
4. With your device on, press ON/  
OFF. If the device turns off, no  
further programming is required.  
Note: If some buttons do not  
operate your equipment, try one of  
the other codes for your brand.  
Write your codes down here for easy reference  
later.  
SAT Functions  
Device  
Device stored Code  
TV  
GUIDE button displays on-screen Satellite Channel  
Guide.  
CHANNEL+ and CHANNEL- buttons perform the  
Page+” and “Page-” function for on-screen Guide  
Menus used by some Satellite systems.  
INFO button brings up Satellite Display screen for  
current Channel and system information.  
MENU brings up the Satellite Menu screen - use  
with the UP, DOWN, LEFT & RIGHT navigation  
buttons.  
TV  
DVD  
CBL/SAT  
VCR/AUX  
OK button is used for on-screen Menu selection.  
EXIT button is used to Exit or Clear on-screen  
Menu displays.  
INPUT button performs the Satellite TV/SAT func-  
tion.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Code Search  
Code Identification  
If your device does not respond after you have tried  
all the codes for your brand, or if your brand is not  
listed, try searching for your code by following these  
steps.  
The Code Identification Feature allows you to  
identify the 4 digit library code stored under your  
device key. For example, if you want to find out what  
4 digit code is stored under your TV device key,  
follow the six steps below:  
1. Manually turn on the device (TV, VCR, etc.) to be  
1. Press and hold the CODE SEARCH  
button until the red indicator stays on.  
Release the CODE SEARCH button.  
controlled.  
2. Press and hold the CODE SEARCH  
button until the red indicator stays on,  
then release the CODE SEARCH button.  
2. Press and release the desired mode  
button (TV, VCR, etc.). The red  
indicator blinks, then stays lit.  
3. Press and quickly release the desired  
mode button (TV, VCR, etc.). The red  
indicator blinks off once.  
3. Press and release the CODE SEARCH  
button. The red indicator blinks once  
and remains lit.  
4. Press the CHANNEL UP button  
repeatedly (up to 300 times) until  
4. To find the first digit for  
the code stored under the  
mode key pressed in step  
2, press each numeric  
the device to be controlled  
changes channel. The red  
indicator blinks off with each  
button press. If you accidentally overshoot the  
code required, press the CHANNEL DOWN  
button to backtrack through the library until the  
device changes channel. Pressing CHANNEL  
UP changes direction to forward again.  
key from 0-9 in turn. The  
number that causes the  
indicator light to blink is  
the first digit in your code.  
5. Press and release ENTER to install the  
code.  
5. To find the second digit, repeat step 4.  
Most users will store VCR codes under the VCR button,  
Cable codes under CABLE, etc. If (for example) you  
want to store a VCR code under CABLE, first follow the  
procedure for Direct Code Entry (page 8) and press  
CABLE in step 2 of Direct Code Entry, then enter ANY  
VCR code in step 3 of Direct Code Entry. Then follow  
the steps above for Code Search.  
6. Repeat step 4 again to find the third and fourth  
digits. This time the red indicator turns off and  
stays off.  
Note: If the device does not have a CHANNEL UP  
button, use PLAY (VCR only) or POWER instead. Code  
Search starts from the currently stored three digit  
number under that mode. Sometimes the first code  
that “works” with your device may only allow limited  
functionality (e.g. the MENU button might not work).  
There may be a code that performs more functions.  
Continue the code search process until the best code  
is found.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsingYour Remote  
UsingYour Remote, cont.  
Controlling Devices with Separate  
Power On and Off Buttons  
Volume/Mute Control and Punch-  
Through  
Some GE, RCA and ProScan models require you to  
press the device button for more than one second  
to turn the device on and the POWER button to turn  
the device off.  
This remote lets you select which device Mode  
controls your Volume/Mute buttons. The remote is  
initially set for all device Modes to use their own  
Volume/Mute control if present. If the programmed  
code has no Volume/Mute operation of its own then  
those buttons will punch-through control to the TV  
Mode device without needing to change to TV  
Mode.  
Controlling Combo Devices  
Some Combo devices (e.g. TV/VCR, TV/DVD,  
DVD/VCR, etc.) will require you to set up two  
different Mode buttons to control both parts of the  
Combo device. For example, if you have a TV/DVD  
Combo, you might need to set up one code under  
the TV button to control the TV part AND a  
separate code (under any other Mode button) to  
control the DVD part.  
Any Mode chosen for Volume/Mute control  
MUST have its own Volume/Mute function or  
the Volume/Mute buttons will do nothing.  
Setting ALL Volume/Mute Control to  
any one Mode  
This routine can set all Modes to “punch-through” to  
any one chosen Mode for Volume/Mute button  
control without the needing to change to that Mode.  
VCR/DVD Punch-Through  
This remote allows the 6 VCR transport buttons  
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC)  
to Punch-Through control from any Mode  
programmed with TV, SAT or Cable codes to the  
last VCR, or DVD programmed Mode you used.  
This feature will not operate if the programmed TV,  
SAT or Cable code has its own VCR transport  
button control e.g. a TV Combo, SAT/PVR, etc.  
1. Press and hold the CODE SEARCH  
button until the red indicator turns on,  
then release the button.  
2. Press and hold the MUTE button until  
the red indicator blinks off, then release  
the button.  
3. Press and release the desired Mode button  
(TV, VCR, etc.) for Volume/Mute control,  
the red indicator blinks then stays on.  
4. Press and release the MUTE button  
and the red indicator turns off. The red  
indicator will blink rapidly for three  
seconds if the Mode you have selected  
has no Volume/Mute control.  
All other Modes will now punch-through to your  
chosen Mode for Volume/Mute control.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsingYour Remote, cont.  
UsingYour Remote, cont.  
Sleep Function  
Setting any Mode to use its own  
Volume/Mute Control  
The Sleep button enables the remote to turn off  
your TV after a period of 1 to 99 minutes as shown  
below. The remote must be in TV mode to set a  
Sleep Timer. This feature works even if your TV  
does not have a sleep feature.  
This routine can set any Mode to use only its own  
Volume/Mute control. Note - If your chosen Mode  
has no Volume/Mute functions of its own then the  
Volume/Mute buttons will do nothing.  
1. Press and release the TV device button.  
1. Press and hold the CODE SEARCH  
button until the red indicator turns on,  
then release the button.  
2. Press and hold the Sleep button until  
the LED remains lit (about 2-3  
seconds).  
2. Press and hold the MUTE button until  
the red indicator blinks off, then release  
the button.  
3. Release the Sleep button.  
3. Press and release the desired Mode  
button (TV, VCR, etc.), the red indicator  
blinks then stays on.  
4. Press and release the  
numeric buttons (01-99) for  
the time required. The LED  
will blink off to indicate  
4. Press and release the VOLUME-  
(Down) button, the red indicator blinks  
then stays on.  
button press acceptance.  
5. Press and release the MUTE button and  
5. TV Sleep Timer is set.  
the red indicator turns off.  
6. Leave the Remote pointing towards the TV  
with an unobstructed path.  
Your chosen Mode will now use its own Volume/  
Mute control.  
To cancel the Sleep Timer, press and hold the  
Sleep button until the LED blinks, or press and  
release the Power button in TV mode.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90 Day Limited Warranty  
Troubleshooting  
Jasco Products Company warrants this product to  
be free from manufacturing defects for a period of  
ninety days from the original date of consumer  
purchase. This warranty is limited to the repair or  
replacement of this product only and does not  
extend to consequential or incidental damage to  
other products that may be used with this unit. This  
warranty is in lieu of all other warranties express or  
implied. Some states do not allow limitations on  
how long an implied warranty lasts or permit the  
exclusion or limitation of incidental or consequential  
damages, so the above limitations may not apply to  
you. This warranty gives you specific rights, and  
you may also have other rights which vary from  
state to state. If unit should prove defective within  
the warranty period, return prepaid with dated proof  
of purchase to:  
Remote does not operate your product.  
Press the mode button of the product you want  
to control.  
Program the remote with a new code.  
Install new batteries. (You might have to  
reprogram your remote after installing new  
batteries.)  
Remote may not be compatible with your  
product.  
Remote does not operate some  
features of your product.  
Sometimes a particular code might operate  
some features but not all. Try programing  
remote with a new code.  
Remote may not be able to operate all features  
of your product or button names might be  
different than your product.  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Red Indicator blinks after you program  
a product code.  
Remote did not accept the code.  
Try to program the code again or try a different  
code.  
Lost Your Codes?  
Enclosed with this remote is a sticker on which you  
should write the codes for each device you  
programmed. Apply the sticker to the back of the  
remote or somewhere convenient for future  
reference.  
Also on the sticker is our website address which,  
should you lose your codes or programming  
instructions, you can find available on our website:  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RM24965  
Universal Remote  
Instruction Manual  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Made in China  
RM24965-12/05  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Marine Sanitation System 650950 X User Manual
Insignia Car Speaker NS PSD5321 User Manual
Invacare Mobility Aid M50TM User Manual
JBL Portable Speaker VRX932LA User Manual
JVC Camcorder GR AX237 User Manual
Kalorik Coffeemaker USK CM 4 User Manual
Kettler Exercise Bike 07863 000 User Manual
Keys Fitness Fitness Equipment KF DB4 User Manual
KitchenAid Microwave Oven KEHU309S User Manual
Kramer Electronics Stereo System SV 551 User Manual