Color Television Users Guide
For Models:
AV-32S776
AV-32S766
AV-30W776
AV-27S776
TV CATV VCR DVD
POWER
INPUT
D/A
SLEEP
TIMER DISPLAY C.C.
THEATER PRO
1
2
3
6
9
VIDEO STATUS
4
5
ASPECT
7
8
0
SUB CH
TUNE
RETURN+
/TV
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH
+
VOL
–
VOL
+
CH
–
MENU
BACK
VCR CHANNEL VCR/DVD
TV/VCR
POWER
PREV NEXT
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1270G
TV
Illustration of AV-30W776 and RM-C1270G
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
LCT1855-001A-A
Serial Number:
0705JGI-II-IM
Download from Www.Somanuals.com. All Manuals Search And Download.
®
• As an “ENERGY STAR ” partner,
JVC has determined that this
product or product model meets the
®
“ENERGY STAR ” guidelines for energy
efficiency.
Important Safeguards
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this
TV set, observe the following basic rules for its installation, use and servicing. Also follow all
warnings and instructions marked on your TV set.
INSTALLATION
(POLARIZED-TYPE)
1 Your TV set is equipped with a polarized AC line plug (one
blade of the plug is wider than the other). This safety feature
allows the plug to fit into the power outlet only one way.
Should you be unable to insert the plug fully into the outlet,
try reversing the plug. Should it still fail to fit, contact your
electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information. If you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7 An outside antenna system should not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRICAL
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)
NEC - NATIONAL ELECTRIC CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
Use
10 Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PORTABLE CART WARNING
(Symbol provided by RETAC)
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and cart combination to overturn.
Service
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Quick Setup . . . . . . . . . . . 8
Sound Adjust . . . . . . . . . 49
Unpacking your TV . . . . . . . . . . . . 8
TV Models . . . . . . . . . . . . . . . . 9
TV Remote Control . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . 12
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug In Menu . . . . . . . . 20
Sound Settings . . . . . . . . . . . . . 49
Adjust Sound Settings . . . . . . . . . 49
Reset . . . . . . . . . . . . . . . . . . 49
Clock Timers . . . . . . . . . . 50
Set Clock . . . . . . . . . . . . . . . . 50
On/Off Timer . . . . . . . . . . . . . . . 51
Button Functions . . . . . . . 52
Remote Programming . . . . . 23
Power . . . . . . . . . . . . . . . . . . 52
Number Buttons . . . . . . . . . . . . . 52
Tune . . . . . . . . . . . . . . . . . . 52
Input . . . . . . . . . . . . . . . . . . . 52
Channel +/- . . . . . . . . . . . . . . 52
Volume +/- . . . . . . . . . . . . . . . 52
Return+/TV . . . . . . . . . . . . . . . 53
Sound . . . . . . . . . . . . . . . . . . 53
Muting . . . . . . . . . . . . . . . . . . 53
Video Status . . . . . . . . . . . . . . . 54
TheaterPro D6500K . . . . . . . . . . . 54
Sleep Timer . . . . . . . . . . . . . . . 54
Display . . . . . . . . . . . . . . . . . 55
C.C. . . . . . . . . . . . . . . . . . . . 55
Aspect . . . . . . . . . . . . . . . . . 56
Aspect Ratios . . . . . . . . . . . . . 56
Favorite . . . . . . . . . . . . . . . . . . . 59
ML/MTS . . . . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . 60
OK . . . . . . . . . . . . . . . . . . . 60
Back . . . . . . . . . . . . . . . . . . . 60
TV/CATV Slide Switch . . . . . . . . . . 61
VCR/DVD Slide Switch . . . . . . . . . 61
VCR Buttons . . . . . . . . . . . . . . . 61
DVD Buttons . . . . . . . . . . . . . . . 61
Setting CATV, VCR and DVD Codes . . . 23
CATV or Satellite Codes . . . . . . . . 23
VCR Codes . . . . . . . . . . . . . . 24
DVD Codes . . . . . . . . . . . . . . 25
Search Codes . . . . . . . . . . . . . 26
Onscreen Menus . . . . . . . . 27
Using the Guide . . . . . . . . . . . . . 27
Onscreen Menu System . . . . . . . . . 28
Initial Setup . . . . . . . . . . 30
Auto Tuner Setup . . . . . . . . . . . . 30
Channel Summary . . . . . . . . . . . . 30
V-Chip . . . . . . . . . . . . . . . . . . 32
Set Lock Code . . . . . . . . . . . . . 38
Language . . . . . . . . . . . . . . . . 39
Closed Caption . . . . . . . . . . . . . 40
Auto Shut Off . . . . . . . . . . . . . . 42
XDS ID . . . . . . . . . . . . . . . . . 42
Tilt Correction . . . . . . . . . . . . . . 42
Noise Muting . . . . . . . . . . . . . . 43
Front Panel Lock . . . . . . . . . . . . 43
V1 Smart Input . . . . . . . . . . . . 44
Video Input Label . . . . . . . . . . . . . 44
Position Adjustment . . . . . . . . . . . . 45
Digital-In . . . . . . . . . . . . . . . . . 46
Digital-In Audio . . . . . . . . . . . . . 46
Picture Adjust . . . . . . . . . 47
Picture Settings . . . . . . . . . . . . . 47
Adjust Picture Settings . . . . . . . . . 47
Color Temperature . . . . . . . . . . . . 47
Digital Noise Clear . . . . . . . . . . . . 47
Natural Cinema . . . . . . . . . . . . . 48
VSM . . . . . . . . . . . . . . . . . . . 48
Reset . . . . . . . . . . . . . . . . . . 48
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Digital Setup . . . . . . . . . 62
Digital Setup . . . . . . . . . . . . . 62
Antenna Level . . . . . . . . . . . . . 62
Digital Sound . . . . . . . . . . . . . 63
Software Update . . . . . . . . . . . . 64
Software Version . . . . . . . . . . . 64
Digital Button Functions . . . 65
Digital CH D/A (Digital/Analog) . . . . . 65
Sub Channel . . . . . . . . . . . . . 65
Guide . . . . . . . . . . . . . . . 66
OSD Information . . . . . . . . 67
Weak Signal . . . . . . . . . . . . . 67
No Program . . . . . . . . . . . . . . 67
Appendices . . . . . . . . . . 68
Troubleshooting . . . . . . . . . . . . . 68
Warranty
.
.
.
.
.
.
.
.
.
.
.
.
.
.
69
Authorized Service Centers . . . . . . . 70
Specifications . . . . . . . . . . . . . 71
Notes . . . . . . . . . . . . . . . . . 75
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking your TV
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Two AA
Batteries
1 Remote Control
1 Television
TV CATV VCR DVD
POWER
INPUT
D/A
SLEEP
TIMER DISPLAY C.C.
THEATER PRO
1
2
3
6
9
VIDEO STATUS
4
5
ASPECT
7
8
0
SUB CH
TUNE
RETURN+
/TV
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH
+
VOL
–
VOL
+
Note: Your television
and/or remote
CH
–
MENU
BACK
VCR CHANNEL VCR/DVD
PREV NEXT
TV/VCR
POWER
REW
REC
PLAY
FF
control may differ
from the examples
illustrated here.
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1270G
TV
Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.
Component Cables
Composite Cables
Audio Cables
Coaxial Cables
Used to connect an
external antenna or
cable TV system to
your TV.
Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Cable
Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Rear Panel Diagram
MODELS : AV-32S776, AV-32S766, AV-30W776, AV-27S776
Note: The terminal
labeled "SERVICE
UNPLUG THE POWER CORD FROM
AC OUTLET BEFORE REMOVING THE
ONLY", is exclusively
used to update the
REAR COVER
When the rear cover is removed, follow
"CAUTION AT DISASSEMBLY" procedure in
the service manual before plugging the TV's
power cord into an AC outlet. Failure to
follow the procedure will result in
PERMANENT damage to some of the
television features.
software version.
DÉBRANCHEZ LE CORDON DE LA PRISE DE
COURANT C.A. AVANT DE RETIRER LE
COUVERCLE ARRIÈRE.
Une fois le couvercle arrière déposé suivez la
procédure ««ATTENTION LORS DU
DÉMONTAGE»» décrite dans la manuel de
service avant de brancher le cordon du
téléviseur dans une prise c.a. L'omission de
suivre la procédure causera des dommages
PERMANENTS
téléviseur.
à
certaines fonctions du
Manufactured under license from
Dolby Laboratories. "Dolby" and
the double-D symbol are
trademarks of Dolby Laboratories.
DIGITAL-IN
VIDEO
SERVICE
ONLY
(DIGITAL)
AUDIO
(DIGITAL)
AUDIO
OUT
AUDIO
VIDEO
S-VIDEO
COMPONENT VIDEO
R
L
Y
Pb
Pr
75Ω
(VHF/UHF)
INPUT-3
INPUT-2
INPUT-1
R
L
OVER
OPTICAL OUT
Digital
Audio
OVER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Side panel diagram
MODEL: AV-30W776
INPUT 4
S-VIDEO
MENU
+
OVER
OPERATE
CHANNEL
VIDEO
–
+
–
L/MONO
AUDIO
R
VOLUME
Front panel diagram
INPUT
4
ON TIMER
POWER
MENU
- CHANNEL +
OPERATE
- VOLUME+
OVER
S-VIDEO VIDEO
L
MONO AUDIO
R
MODELS: AV-32S776, AV-32S766, AV-27S776
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Remote Control
POWER
TV CATV VCR DVD
INPUT
D/A
SLEEP
TIMER DISPLAY C.C.
THEATER PRO
1
2
3
6
9
VIDEO STATUS
4
5
ASPECT
7
8
0
TUNE
RETURN+
/TV
SUB CH
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH +
VOL
+
VOL
–
CH –
MENU
BACK
VCR/DVD
POWER
VCR CHANNEL
PREV NEXT
TV/VCR
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1270G
TV
RM-C1270G
MODELS:
AV-32S776
AV-32S766
AV-30W776
AV-27S776
• For information on remote control buttons, see pages 52 - 61 and 65 - 66.
• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an
ATSC antenna or Digital Cable, you can use these buttons.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first
need to install the batteries (included).
Lift and pull the latch on the back of the remote control
to open. Insert two batteries (included) carefully noting
the “+” and “–” markings, placing the “–” end in the unit
first. Snap the cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes for your
VCR, DVD, and/or cable box/satellite receiver may
have to be reset. See pages 23 - 26.
Key Feature Buttons
MUTING
OK
The four key feature buttons at the center of the remote
can be used for basic operation of the television. The top
and bottom buttons will scan forward and back through the
available channels. To move rapidly through the channels
using JVC’s Hyperscan feature, press and hold CH+ or
CH–. The channels will zip by at a rate of five channels per
second. The right and left buttons will turn the volume up or
down. These buttons are also marked with four arrows and
are used with JVC’s onscreen menu system. To use the
onscreen menus, press the MENU button.
CH +
CH –
VOL
+
VOL
–
MENU
BACK
POWER
TV CATV
Basic Operation
Turn the television on and off by pressing the POWER button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 23 to 26 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
V VCR DVD
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Step 2 – Connecting Your Devices
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Do you use a Cable TV Box?
Yes
No
Do you have a VCR?
Do you have a VCR?
Yes
No
Yes
No
Diagram #2 Diagram #1
Diagram #3 Diagram #1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Diagram #1
Cable or Antenna
Output
Coaxial Cable
75Ω
(VHF/UHF)
OR
OUT IN
TV Rear Panel
Cable Box
Note:
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
Diagram #2
AUDIO
OUT
AUDIO
VIDEO
S-VIDEO
COMPONENT VIDEO
Pb Pr
R
L
Y
75Ω
(VHF/UHF)
INPUT-3
INPUT-2
INPUT-1
Cable or Antenna
Output
R
L
OVER
OVER
OPTICAL OUT
Digital
Audio
TV Rear Panel
Coaxial Cable
Two-Way
Splitter
OR
VCR
IN
IN
OUT
R
L
V
OUT
OUT
IN
Cable Box
Notes:
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the
LEFT AUDIO INPUT on the front of the TV.
• Use the S-Video connection if possible for superior picture quality.
• Your VCR must be turned on to view premium cable channels.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• You may also connect the DVD player to Input 1.
Diagram #3
Cable or Antenna
Output
VCR
IN
Two-Way Splitter
OUT OUT
R
L
V
IN
IN
OUT
OUT
Coaxial Cable
(Attachment)
OR
AUDIO
OUT
AUDIO
VIDEO
S-VIDEO
COMPONENT VIDEO
Pb Pr
R
Y
75Ω
(VHHF)
INPUT-3
INPUT-2
INPUT-1
R
L
OVER
OVER
OPTICAL OUT
Digital
Audio
TV Rear Panel
Y
Green
Blue
P
P
B
R
Red
UDOUT
O
L
R
DVD Player (OPTIONAL)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a Camcorder
You may connect a camcorder, game console or other equipment to your television by using
the input jacks (Input 4) located on the side or front of the television. You can also connect
these using the television’s rear input jacks, using the same instructions.
Illustration of AV-30W776
INPUT
4
S-VIDEO
MENU
+
–
+
–
OVER
VIDEO
Camcorder
OPERATE
CHANNEL
- OR -
L/MONO
AUDIO
R
VOLUME
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the side of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the side of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
L/MONO on the side of the TV. (AV-30W776 ONLY). For all the other models, please use
the input jacks on the front control panel.
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or Dolby Digital.
TV Rear Panel
OPTICAL OUT
Digital Audio
Amplifier
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in
the Digital Setup Menu. See page 63.
• Refer to your owners manual on using your amplifier.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a Digital TV Receiver
By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in
their digital form.
DTV Decoder
AUDIO
OUT
AUDIO
VIDEO
S-VIDEO
COMPONENT VIDEO
Y Pb Pr
R
L
75Ω
DIGITAL OUT
AUDIO OUT
(VHF/UHF)
INPUT-3
INPUT-2
INPUT-1
L
R
R
L
OVER
OVER
OPTICAL OUT
Digital
Audio
TV Rear Panel
DIGITAL-IN
HDMI to DVI Cable
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
After the connections have been made,
tighten the screw to secure the cables.
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO IN into
VIDEO-3 on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO IN into
VIDEO-3 on the back of your television.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer
to page 46.)
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITAL-IN AUDIO", page 46.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a HDMI Compatible Device
By connecting a HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides and interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Compatible Device
DIGITAL OUT
AUDIO OUT
L
R
TV Rear Panel
DIGITAL-IN
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
HDMI Cable
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to
the DIGITAL-IN on the back of your television.
Note:
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
DIGITAL. See "DIGITAL-IN AUDIO", page 46.
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time until
the signal becomes stable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to an AV Receiver using your television's
V1 Smart Input
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
AV Receiver
MONITOR
Y
OUT
B
MONOR OUT
TV Rear Panel
AUDIO
OUT
AUDIO
VIDEO
S-VIDEO
COMPONENT VIDEO
R
L
Y
Pb
Pr
75Ω
(VHF/UHF)
INPUT-3
R
L
INPUT-2
INPUT-1
OV
OVER
OPTICAL OUT
Digital
Audio
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1
on the back of your television.
2) Connect a Yellow Component Cable from the AV Receiver's MONITOR OUT, into the
VIDEO INPUT-1 on the back of your television.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component Cable from the AV Receiver's Pb MONITOR OUT, into the
Pb VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component Cable from the AV Receiver's Pr MONITOR OUT, into the Pr
VIDEO INPUT-1 on the back of your television.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V1 Smart Input function is turned on.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the
S-Video connection.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Step 3 – The Interactive Plug In Menu
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Notes:
• The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case use the onscreen menus to perform these settings. See pages 39, 50 and 30.
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.
Language
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Français) or Spanish (Español).
è
To choose a language:
(English, Français or Español)
LANGUAGE/LANGUE/IDIOMA
†
To NEXT (To set clock)
ENGLISH
NEXT
MENU
SELECT OPERATE
EXIT
(To be continued...)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may
precisely set your clock using the XDS time signal broadcast by most public analog
broadcasting stations. If you do not have this in your area, you will have to set the clock
manually. See manual clock set below. To set the clock using the XDS signal:
è
†
To choose AUTO
To TIME ZONE
SET CLOCK
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
MODE
AUTO
-- : -- --
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
†
è
†
To move to D.S.T. (Daylight Savings Time)
To turn D.S.T. ON or OFF
To NEXT (To Auto Tuner Setup)
NEXT
MENU
SELECT OPERATE
EXIT
Notes:
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.
• Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically
adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00
am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last
Sunday in October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è
†
To choose MANUAL
To TIME
SET CLOCK
è
†
To set the hour
To minute
MODE
MANUAL
-- : -- --
è
†
To set the minute
To TIME ZONE
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
START CLOCK
MENU
SELECT OPERATE
EXIT
†
è
†
To move to D.S.T. (Daylight Savings Time)
To turn D.S.T. ON or OFF
To START CLOCK
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
(To be continued...)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
è
To choose CABLE or AIR (or SKIP when you
skip AUTO TUNER SETUP)
AUTO TUNER SETUP
TUNER MODE
AIR
†
To START
After Analog Auto Tuner Setup is finished, Digital Auto
Tuner Setup starts.
START
SELECT OPERATE
MENU
EXIT
NOW
PROGRAMMING !
Now Programming...
20
48
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• If you want to cancel the Auto Tuner Setup, press the MENU button.
• Noise muting will not work during Auto Tuner Setup.
• If you choose SKIP, it finished without doing the Auto Tuner Setup.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
The Quick Setup is complete
STOP
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control
supplied by the manufacturer.
Cable Box or Satellite Codes
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 26.
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Echostar
100, 113, 114,
115
Cableview
Citizen
Realistic
Regal
058, 064, 040,
041, 042, 045,
068
Express VU
G.E.
100, 113
Curtis
106
Diamond
Eagle
Regency
034
G.I.
108
Rembrandt
037, 032, 051,
038
Gradiente
Hitachi
112
Eastern
GC Brand
Gemini
034
032, 051
022, 043
104, 111
Samsung
051
HNS (Hughes)
Scientific Atlanta 057, 058, 059
104
General Instrument 065, 024, 025,
026, 027, 020,
SLMark
051, 047
051, 056
032, 051
Panasonic
Philips
105
Sprucer
Stargate
102, 103
021, 022, 057,
023
040, 041, 042,
045, 058, 064
049, 024
Primestar
108
Hamlin
Telecaption
Teleview
Texscan
Tocom
067
Proscan
RCA
106, 109, 110
106, 109, 110
Hitachi
Jerrold
047, 051
044
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Sony
107
035, 036, 066
050
Star Choice
104, 108
Toshiba
Unika
Toshiba
Uniden
101
Macom
049, 050, 051,
054
102, 103
032, 025
Universal
Videoway
Viewstar
Zenith
022, 032
052
Magnavox
033
030
Memorex
Movietime
029, 030
063, 046
046
032, 051
039, 037, 048
Oak
Panasonic
055, 056, 060,
071, 073
Zenith/Drake
Satellite
Paragon
Philips
063
028, 029, 030,
052, 053, 031,
069
Pioneer
Pulsar
047, 062
051, 032
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR Codes
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 26.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the REC button on the remote and press PLAY.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
Samtron
Sansui
089
Akai
029, 072, 073, Memorex
024, 067
003, 026, 020,
052
074
038, 040, 047,
048, 041, 042
MGA
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
CCE
Multitech
NEC
047, 027, 062
Citizen
064
003, 004, 005,
000
024, 023
Sears
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
Curtis Mathes
045, 024, 027,
093
Olympic
Shintom
Sharp
075
Optimus
028, 021, 035,
064
026, 020
Daewoo
043, 059, 024,
092
003, 004, 005
035, 036, 080,
088
Orion
DBX
Panasonic
023, 024, 021,
022
Signature 2000 027, 035
Dimensia
Emerson
045, 093
Singer
Sony
075
043, 026, 077,
061, 025, 042,
020, 076
Penney
024, 058, 045,
063, 003, 004,
005, 093
028, 029, 030,
053, 054, 055
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Pentax
Philco
058, 005, 045,
093
031, 023, 024,
027
027, 026, 020,
000
031, 024, 027,
023, 026, 020,
043
Symphonic
Tashiro
Tatung
027, 081
064
033, 045, 024
G.E.
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Teac
003, 004, 027,
005
Pioneer
Proscan
023
Goldstar
064
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
Gradiente
083, 084, 081,
000, 001
Teknika
Toshiba
024, 027, 070
059, 046, 079
Hitachi
023, 045, 058,
027, 081, 093
Quasar
021, 022, 023,
024
Vector Research 005
Instant Replay 024, 023
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
000, 001, 002,
003, 004, 005
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Magnavox
031, 023, 024,
086
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
DVD Codes
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the Display button, then enter the first code number listed with the 10
key pad.
4) Release the Display button, and confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 26.
• After you program your remote, some DVD buttons may not work properly. If so, use the
DVD player’s remote.
DVD Player
Aiwa
CODES
043
DVD Player
RCA
CODES
021, 026
Apex
040
Sampo
Samsung
Sharp
034
030
028
038
Denon
Hitachi
JVC
020, 037
030, 031
000
Silvania
Sony
Kenwood
Konka
035
024, 045, 046,
047
039
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
Raite
025
Technics
Toshiba
Vialta
020
041
023
044
050
020
Wave
042
023, 036
022
Yamaha
Zenith
020
027, 032
033
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.
3) Press the POWER button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press RETURN+/TV to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds
and release.
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press RETURN+/TV to exit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
è Left and right arrows mean press the VOLUME+ or VOLUMEРbuttons to move left or right
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping arrow” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in green is the one currently selected. If you use the MENU button on the TV’s side or
front panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS
and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive
plug-in menu” will appear the first time the TV is plugged in.
INITIAL SETUP
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
NEXT PAGE
(4/5)
EXIT
MENU
SELECT OPERATE
Note:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. Examples of the onscreen
menus are shown on the next page. Detailed explanations on using each menu follow later in
this guide. For information about the interactive plug-in Menu, see pages 20 - 22.
The Onscreen Menu System
To open the onscreen menu system, press the MENU button on the remote control. You
navigate within the onscreen menus by using the four directional arrow buttons on the remote
control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions
will not operate when the onscreen menu is active).
The selected feature and option on a menu screen are highlighted in a different color.
Selected Option
(Green)
ENG. FRAN. ESP.
LANGUAGE
Selected Option
(Blue)
CLOSED CAPTION
To move to a different feature use the π† arrows to move up or down the list. When you
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen
will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing
MENU on the remote control will close the onscreen menu system and return you to normal
television viewing.
Each menu and its features will be discussed in the following pages of this guide.
Notes:
• If you do not press any buttons for a few seconds, the onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Press the MENU button
TO INITIAL SETUP 03
/
INITIAL SETUP
CLOCK TIMERS
PREVIOUS
SET CLOCK
INITIAL SETUP
PREVIOUS
PREVIOUS
DIGITAL-IN
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
AUTO
/
ON OFF TIMER
DIGITAL
DIGITAL-IN AUDIO
SET LOCK CODE
NEXT PAGE
NEXT PAGE
(1/5)
NEXT PAGE
(4/5)
EXIT
MENU
SELECT OPERATE
EXIT
MENU
MENU
SELECT OPERATE
EXIT
SELECT OPERATE
CLOCK/TIMERS
INITIAL SETUP 01
INITIAL SETUP 04
INITIAL SETUP
INITIAL SETUP
SOUND ADJUST
PREVIOUS
PREVIOUS
PREVIOUS
DIGITAL SETUP
NOISE MUTING
ON
OFF
OFF
BASS
00
00
00
FRONT PANEL LOCK
V1 SMART INPUT
TREBLE
BALANCE
VIDEO INPUT LABEL
POSITION ADJUSTMENT
RESET
NEXT PAGE
(2/5)
NEXT PAGE
(5/5)
EXIT
NEXT PAGE
MENU
MENU
SELECT OPERATE
EXIT
SELECT OPERATE
MENU
SELECT OPERATE
EXIT
INITIAL SETUP 02
INITIAL SETUP 05
SOUND ADJUST
INITIAL SETUP
ENG. FRAN. ESP.
PICTURE ADJUST
PICTURE ADJUST
PREVIOUS
PREVIOUS
LANGUAGE
STANDARD
PREVIOUS
STANDARD
OFF
DIG. NOISE CLEAR
NATURAL CINEMA
VSM
TINT
00
00
00
00
00
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
AUTO
ON
COLOR
PICTURE
BRIGHT
DETAIL
OFF
OFF
TILT CORRECTION
RESET
COLOR TEMPERATURE
NEXT PAGE
LOW
(1/2)
NEXT PAGE
(2/2)
NEXT PAGE
(3/5)
MENU
MENU
MENU
SELECT OPERATE
SELECT OPERATE
EXIT
SELECT OPERATE
EXIT
EXIT
PICTURE ADJUST 02
INITIAL SETUP 03
PICTURE ADJUST 01
TO INITIAL SETUP 04
Notes:
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
digital-in terminal and the picture is being displayed on the screen.
• When the MENU button on the TV side or front panel is pressed, the FRONT PANEL
CONTROL menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.
• POSITION ADJUSTMENT is for AV-30W776 ONLY.
• Regarding the digital setup menu, see page 62.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
AUTO TUNER SETUP
π†
è
è
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
TUNER MODE
CABLE
Press the OK button to start
OK
PRESS TO START
Programming will take approximately 1 to 2 minutes.
The auto tuner is finished when the message
PROGRAMMING OVER! appears onscreen.
MENU
SELECT OPERATE
EXIT
Press the MENU button when finished
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
Regarding analog channels, you can add or delete channels from the line-up or prevent any
unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the
only channels that will appear are the ones that are broadcasting.
Press the MENU button
To CHANNEL SUMMARY
To operate
Analog Channels
CHANNEL SUMMARY
π†
CHNO. SCAN
ID
CHNO. SCAN
ID
è
01
06
HBO
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. Regarding
analog channels, you can delete channels from the scan
by removing the “√”. If any channels were missed during
auto tuner setup and you wish to add them, you may by
placing an “√” next to the channel number.
02
03
04
05
MTV
07
08
09
10
L
A&E
E!
OK
MENU
SELECT
OPERATE
EXIT
Digital Channels
• Digital channels can not be added to the channel
summary if the auto tuner setup did not find them.
Channel Summary Digital
CH No.
D01
Scan
Station Name
FOX
π†√® To the SCAN column
Press the OK button to include or delete from
scan
D02
ABC
D02
CNN
D10-1
D10-2
D12345
NBC
BOX
Press the MENU button when finished
NHK
BACK
MENU
Operate
Back
Exit
Note:
• The number of a digital channel may change, depending on the time of some broadcastings.
If this channel existed and now had disappeared, the lock channel or scanned channel by the
channel summary for that channel will be cancelled.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
How to set the channel label. (This is only for analog broadcasting.)
Press the MENU button
ID
π†
è
π†
To CHANNEL SUMMARY
To operate
To the ID column
CHANNEL 09
RESET
Press the OK button to enter
OK
PRESS TO FINISH
è
π†
To select the character you want
To move to the next space
MENU
SELECT OPERATE
EXIT
...continue to follow these directions for all four
spaces
Press the OK button to finish
Your characters are now set
Press the MENU button when finished
If you want to reset the characters you set:
Press the MENU button
π†
è
π†
To CHANNEL SUMMARY
To operate
To the ID column
Press the OK button to enter
To select RESET
π†
Press the OK button to finish
Your characters are now reset
Notes:
• You can use characters for: Alphabet, numbers, marks and spaces.
• It is possible to set the maximum of 40 channel labels.
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will
appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
To operate
è
π†√® To the Lock Column (
)
Press the ZERO button to lock or unlock that channel
Press the MENU button when finished
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct code
is entered.
No. - - - -
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 38.
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 33 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
To operate (Lock icon
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
will appear)
Press ZERO to access the V-Chip menu
VIEW
è
To turn V-Chip ON or OFF (V-Chip must be
turned ON for rating settings to operate)
MENU
SELECT OPERATE
EXIT
π†
To move to SET US TV RATINGS,
SET MOVIE RATINGS, or
SET CANADIAN RATINGS (see following
pages for descriptions of each item)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to BLOCK.
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
V-CHIP
OFF
V-CHIP
π†
To V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
è
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
VIEW
π†
To UNRATED
è
To VIEW or BLOCK
MENU
SELECT OPERATE
EXIT
Press MENU when done
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❒ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Setting US V-Chip Ratings
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
To operate (lock icon
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
appears)
Press ZERO to access the V-Chip menu
VIEW
è
π†
è
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
To operate
MENU
SELECT OPERATE
EXIT
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the π† or √® to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
π†√® To the TV 14 Column
SET US TV RATINGS
TV
TV
TV
PG
TV
G
TV
Y7
TV
Y
Press the OK button to lock
MA 14
Press the MENU button when finished
V/FV
S
L
Note:
D
• If you want to change the setup, move the cursor to
the top column and change the lock icon to “—” by
pressing OK again. You may then select individual
categories to block.
OK
MENU
EXIT
SELECT
OPERATE
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children’s
programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒
PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET MOVIE RATINGS
To enter movies menu
For example:
To block viewing of X and NC-17 rated from shows:
SET MOVIE RATINGS
π†√® To the X Column
Press the OK button to lock
π†√® To the NC-17 Column
Press the OK button to lock
Press the MENU button to finish
N
P
C17
R
G13
PG
G
X
NR
OK
MENU
EXIT
SELECT
OPERATE
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
For example:
SET CANADIAN RATINGS ENG
To block viewing of programming rated 14+ and
18+:
P
C
8
G
C
18+
14+
è
To the 18+ Column
G
Press the OK button to lock
To the 14+ Column
è
Press the OK button to lock
Press the MENU button to finish
MENU
OK
EXIT
SELECT
OPERATE
Note:
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 37 in the
French side of this user’s guide.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the MENU button
SET LOCK CODE
π†
To SET LOCK CODE
To operate (lock icon
LOCK CODE
0000
è
appears)
Press ZERO to access the lock code
The first digit will be highlighted
OK
PRESS
TO FINISH
è
π†
To select the number
MENU
SELECT OPERATE
EXIT
To move to the next digit
Continue to follow these directions for all four numbers
Press the OK button to finish (your lock code is now set)
Press the MENU button when finished
When a viewer attempts to watch a blocked channel,
this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
No. - - - -
The channel will remain blocked until the correct lock
code is entered (see above for information on setting
your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Language
The language function is described on page 20 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
To LANGUAGE
LANGUAGE
ENG. FRAN. ESP.
è
To choose a language: ENG. (English), FRAN.
(French) or ESP. (Spanish)
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
OFF
Press the MENU button when finished
TILT CORRECTION
NEXT PAGE
(3/5)
MENU
SELECT OPERATE
EXIT
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below. There are three methods. When you are watching
analog channels, you can perform Analog Setting of closed caption. When you are watching
digital channels, you can perform Digital Auto Setting or Digital Manual Setting.
Analog Setting
Press the MENU button
CLOSED CAPTION
π†
è
π†
è
π†
è
To CLOSED CAPTION
To enter
To MODE
To select CAPTION or TEXT in MODE
To CAPTION or TEXT
To select a caption (CC1 to CC4) or text
channel (T1 to T4)
MODE
TEXT
CC1
T1
CAPTION
TEXT
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
Press the OK button to save
Press the MENU button when finished
Digital Auto Setting
Press the MENU button
Digital Closed Caption
Preview
π†
è
π†
è
To CLOSED CAPTION
To enter
To Type
Closed Caption Sample
Type
AUTO
1
Service
Appearance
To select Auto, Advanced or Basic
Auto: Shows closed caption a priority for
digital channels over analog channels. It is
set automatically.
Cancel
Set
BACK
MENU
Select
Operate
Back
Exit
Advanced: Shows only the digital closed
caption.
Basic: Shows only the analog closed
caption.
Digital Closed Caption
Preview
>
Appearance
Closed Caption Sample
Appearance Mode
Auto
π†
è
π†
è
è
π†
To Service
Font
To select 1, 2, 3, 4, 5 or 6
To Appearance
To enter
To select Auto
To Set
Colors
Opacities
Cancel
Set
BACK
MENU
Select
Operate
Back
Exit
Press the OK button to save
The font/type and color are set automatically.
Press the MENU button when finished
Note:
• If you want to cancel the settings, select cancel.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Digital Manual Setting
Press the MENU button
Digital Closed Caption
Preview
>
Appearance
π†
To CLOSED CAPTION
Closed Caption Sample
è
π†
è
π†
è
π†
è
è
π†
è
π†
è
To enter
To Type
Appearance Mode
Manual
Font
Colors
Opacities
To select Auto, Advanced or Basic
To Service
To select 1, 2, 3, 4, 5 or 6
To Appearance
To enter
To select Manual
To Font
To enter
To select Font Size or Font Style
To select the setting you like
Cancel
Set
BACK
MENU
Select
Operate
Back
Exit
Digital Closed Caption
Preview
>
Appearance
Closed Caption Sample
Font Size
Standard
Auto
Appearance Mo
Font
Font Style
Colors
Font Size: Auto, Standard, Large or Small
Cancel
Set
Opacities
Cancel
Font Style: Auto, Serif Mono, Serif, Sanserif mono,
Sanserif, Casual, Cursive or Small Capital
π†
Set
BACK
MENU
Select
Operate
Back
Exit
To Set
Press the OK button to save
π†
è
π†
è
To Colors
To enter
To select Text, Edge or Background
To select the setting you like
Digital Closed Caption
Preview
>
Appearance
Closed Caption Sample
Text
Appearance Mo
White
White
Black
Edge
Auto, White, Black, Red, Green, Blue,
Yellow, Magenta or Cyan
Font
Background
Cancel
Colors
Opacities
Set
π†
To Set
Cancel
Set
BACK
MENU
Press the OK button to save
Select
Operate
Back
Exit
π†
è
π†
è
To Opacities
To enter
To select Text/Edge or Background
To select Auto, Transparent, Translucent, Solid
or Flashing
To Set
All fonts used for digital closed
caption and digital menus are
licensed from Monotype Imaging
Inc.
π†
Press the OK button to save
Press the MENU button when finished
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 55.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel the
TV is on.
INITIAL SETUP
Press the MENU button
PREVIOUS
LANGUAGE
ENG. FRAN. ESP.
π†
è
To AUTO SHUT OFF
To turn ON or OFF
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
OFF
Press the MENU button when finished
TILT CORRECTION
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
“NOT RECEIVING A SIGNAL AUTO SHUT OFF
IN 9 MIN.” appears on the screen, and starts the
NEXT PAGE
(3/5)
MENU
SELECT OPERATE
EXIT
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
XDS ID
XDS ID Display provides a channel’s call letters, the network’s name, and even a program
name. The XDS ID information is provided by the broadcaster.
INITIAL SETUP
Press the MENU button
PREVIOUS
LANGUAGE
ENG. FRAN. ESP.
π†
è
To XDS ID
To turn ON or OFF
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
OFF
Press the MENU button when finished
TILT CORRECTION
NEXT PAGE
(3/5)
MENU
SELECT OPERATE
EXIT
Tilt Correction
This adjusts the pictures so that it looks even on the screen and not lopsided.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
è
To TILT CORRECTION
To enter
To adjust TILT CORRECTION
LANGUAGE
ENG. FRAN. ESP.
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
OFF
TILT CORRECTION
Press the MENU button when finished
NEXT PAGE
(3/5)
MENU
SELECT OPERATE
EXIT
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To NOISE MUTING
To turn noise muting ON or OFF
NOISE MUTING
ON
OFF
OFF
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
Press the MENU button when finished
NEXT PAGE
(2/5)
MENU
Note:
SELECT OPERATE
EXIT
• Noise muting will not work during auto tuner setup or
when you operate channel summary.
• Noise muting will not work when the digital TV is displayed.
Front Panel Lock
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To FRONT PANEL LOCK
To turn ON or OFF
NOISE MUTING
ON
OFF
OFF
FRONT PANEL LOCK
V1 SMART INPUT
Press the MENU button when finished
VIDEO INPUT LABEL
POSITION ADJUSTMENT
NEXT PAGE
(2/5)
MENU
SELECT OPERATE
EXIT
You can turn off this feature in the following ways:
• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your
remote control.
• Use the remote control.
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD
for FRONT PANEL LOCK will appear.
Note:
• To turn ON/OFF the TV, press the POWER button for more than 3 seconds. This feature will
remain ON.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
V1 Smart Input
This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To V1 SMART INPUT
To turn ON or OFF
NOISE MUTING
ON
OFF
OFF
FRONT PANEL LOCK
V1 SMART INPUT
Press the MENU button when finished
VIDEO INPUT LABEL
POSITION ADJUSTMENT
Notes:
NEXT PAGE
(2/5)
• If you do not have an AV Receiver connected to your
television, turn this feature OFF.
MENU
SELECT OPERATE
EXIT
• Some AV Receivers may not work with this function.
Video Input Label
This function is used to label video input connections for
the onscreen displays.
INITIAL SETUP
PREVIOUS
NOISE MUTING
ON
Press the MENU button
OFF
OFF
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
π†
è
π†
è
To VIDEO INPUT LABEL
To operate
NEXT PAGE
(2/5)
To select the desired video input
MENU
SELECT OPERATE
EXIT
To select the desired preset input label (see
chart below)
VIDEO INPUT LABEL
VCR
Press the OK button to save
VIDEO-1
VIDEO-2
VIDEO-3
VIDEO-4
DIGITAL-IN
DVD
SAT
Press the MENU button when finished
GAME
STB
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
Preset
Labels
Select when...
You have a VCR connected to the video input
You have a DVD connected to the video input
VCR
DVD
You have a Digital VCR connected to the video input
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
You have a Video Game connected to the video input
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
D-VHS
STB
SAT
AMP
GAME
CAM
DISC
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the MENU button
π†
è
To POSITION ADJUSTMENT
To enter
π†√® To adjust the position
Press the MENU button to finish
Notes:
OK
MENU
RESET
EXIT
OPERATE
• POSITION ADJUSTMENT is for AV-30W776 ONLY.
• To reset the adjustment to the center, press the OK button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select regular size with aspect, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for 1080i and 720p signals.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either AUTO, SIZE1 or SIZE2.
Press the MENU button
INITIAL SETUP
PREVIOUS
π† To DIGITAL-IN
AUTO
DIGITAL-IN
DIGITAL
DIGITAL-IN AUDIO
è To enter
π† To select AUTO, SIZE1 or SIZE2
Press the MENU button to finish
NEXT PAGE
(1/5)
MENU
SELECT OPERATE
EXIT
Note:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
Digital-In Audio
This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
INITIAL SETUP
PREVIOUS
AUTO
DIGITAL
DIGITAL-IN
Press the MENU button
DIGITAL-IN AUDIO
π†
To DIGITAL-IN AUDIO
è
To select “ANALOG”, “DIGITAL” or AUTO
Press the MENU button when finished
NEXT PAGE
(1/5)
EXIT
MENU
SELECT OPERATE
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
63.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
TINT
Tint allows you to adjust the levels of red and green in your TV picture.
COLOR
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
PICTURE
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
BRIGHT
You can adjust the overall brightness of the TV picture with the Bright control.
DETAIL
The Detail feature adjusts the level of fine detail displayed in the picture.
Adjust the Picture Settings
Press the MENU button
PICTURE ADJUST
PREVIOUS
TINT
STANDARD
π†
To TINT, COLOR, PICTURE, BRIGHT or
DETAIL
To enter
00
00
00
00
00
COLOR
PICTURE
BRIGHT
DETAIL
√ ®
+02
TINT
COLOR TEMPERATURE
NEXT PAGE
LOW
(1/2)
√ ®
π†
To adjust the setting
To move to the next setting
MENU
SELECT OPERATE
EXIT
Press the MENU button when finished
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
PICTURE ADJUST
PREVIOUS
TINT
STANDARD
π†
è
To COLOR TEMPERATURE
To enter
00
00
00
00
00
COLOR
PICTURE
BRIGHT
DETAIL
COLOR TEMPERATURE LOW HIGH
è
To set LOW or HIGH
COLOR TEMPERATURE
NEXT PAGE
LOW
(1/2)
Press the MENU button when finished
MENU
SELECT OPERATE
EXIT
Digital Noise Clear
With digital noise clear, this helps take our static or noise from a channel that may not be
coming in clearly.
Press the MENU button
DIG. NOISE CLEAR
π†
è
π†
To DIG. NOISE CLEAR
To enter
To select the mode “LOW”, “HIGH” or “OFF”
OFF
LOW
HIGH
Press the MENU button when finished
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Natural Cinema
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
NATURAL CINEMA
Press the MENU button
AUTO
π†
è
π†
To NATURAL CINEMA
To enter
To select the mode “AUTO", "ON" or "OFF”
ON
OFF
Press the MENU button when finished
Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:
• Turning on or off
• Changing the channel or input mode
• Using multi-screen functions
(VSM) Velocity Scan Modulation
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help
accentuate the differences in picture brightness to sharpen the edges of images.
Press the MENU button
PICTURE ADJUST
PREVIOUS
STANDARD
OFF
π†
è
To VSM
To enter
DIG. NOISE CLEAR
NATURAL CINEMA
VSM
AUTO
ON
VSM
ON OFF
RESET
è
To turn VSM ON or OFF
NEXT PAGE
(2/2)
MENU
SELECT OPERATE
EXIT
Press the MENU button when finished
Reset
Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig.
noise clear and VSM) at once to the default settings.
Press the MENU button
PICTURE ADJUST
PREVIOUS
STANDARD
π†
è
To RESET
To enter
DIG. NOISE CLEAR
NATURAL CINEMA
VSM
OFF
AUTO
ON
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the picture adjustments.
RESET
NEXT PAGE
(2/2)
Press the MENU button when finished
MENU
SELECT OPERATE
EXIT
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the
balance setting.
Adjust the Sound Settings
Press the MENU button
SOUND ADJUST
PREVIOUS
π†
√ ®
π†
To BASS, TREBLE or BALANCE
To adjust the setting
To move to the next setting
BASS
00
00
00
TREBLE
BALANCE
Press the MENU button when finished
RESET
NEXT PAGE
Notes:
MENU
SELECT OPERATE
EXIT
• You can reset the sound adjustments (BASS, TREBLE
and BALANCE) you set at once as the default setting when you select reset. See page 48.
• You can adjust BALANCE only when HYPER SURROUND is off. See page 53.
Reset
Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.
See page 48 on how to use reset.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
Set Clock
The set clock function is described on page 21 as the interactive plug-in menu. You can choose
to set the clock automatically, or manually. If you need to set the clock again, follow the steps
below.
Press the MENU button
π†
To SET CLOCK
To operate
è
When you set the clock automatically, choose AUTO by pressing the
√
or
®
arrows.
π†
To TIME ZONE
SET CLOCK
è
To select your time zone
MODE
AUTO
-- : -- --
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
TIME
HAWAII
ALASKA
PACIFIC
TIME ZONE
D.S.T.
ATLANTIC
ON
π†
To D.S.T. (daylight savings time)
To turn D.S.T. ON or OFF
Press OK to finish
OK
PRESS TO FINISH
è
MENU
SELECT OPERATE
EXIT
Press the MENU button when finished
When you set the clock manually, choose MANUAL by pressing the
√
or
®
arrows.
π†
è
π†
è
π†
è
To move to the hour
To set the hour
To move to minutes
To set the minutes
To TIME ZONE
SET CLOCK
MODE
MANUAL
-- : -- --
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
To select your time zone:
(Atlantic, Eastern, Central, Mountain, Pacific, Alaska or
Hawaii)
OK
PRESS TO START CLOCK
MENU
SELECT OPERATE
EXIT
π†
To D.S.T. (daylight savings time)
To turn D.S.T. ON or OFF
è
Press OK to start clock
THANK YOU !!
Press the MENU button when finished
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Press the MENU button
ON/OFF TIMER
7:00 PM
10:00 PM
03
ON TIME
π†
è
è
†
To ON/OFF TIMER
OFF TIME
CHANNEL
ON VOLUME
MODE
To operate (begins with ON TIME)
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
CURRENT
EVERYDAY
NO
ON/OFF TIMER
OK
PRESS TO FINISH
è
†
To set the minutes
MENU
SELECT OPERATE
EXIT
To accept ON TIME and move to OFF TIME (the
time the TV will turn off). Set the OFF TIME the same way as ON TIME
To accept OFF TIME and move to CHANNEL
To select channel
†
è
†
To ON VOLUME
è
†
To set the volume level
To move to MODE
è
Choose ONCE or EVERYDAY
†
To ON/OFF TIMER
è
Choose YES to accept the timer setting, choose NO if you don’t wish to accept
Press the OK button to finish
Press the MENU button to exit the menu
Notes:
• The on/off time cannot be set to locked or guarded channels.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (ZERO)
1 (ONE)
2 (TWO)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (ONE)
2 (TWO)
Press the TUNE button
Input
Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGITAL-IN for video
devices like VCR’s DVD players, or camcorders.
Press the INPUT button
By every press of the INPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on the
side or front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing Menu
†
on the side or front panel and choose a mode by using the
CHANNEL+/- buttons (
√
OPERATE ).
®
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV’s volume level.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Return +/TV
The Return+/TV button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
RETURN+/TV and hold for three seconds
RETURN CHANNEL
PROGRAMMED!
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/- buttons.
RETURN+/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.
The message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel
return+.
Sound
By pressing the SOUND button, you can change the Hyper Surround mode, BBE and SMART
SOUND on or off.
HYPER SURROUND - Adds a more spacious surround sound. Music gives basic effect and
movie for more effect.
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.
SMART SOUND - Decreases high sound levels, giving a regulated sound level.
Press the SOUND button
SOUND EFFECT
π†
To select HYPER SURROUND, BBE or SMART
SOUND
To choose the setting
HYPER SURROUND
BBE
ON OFF
ON OFF
ON OFF
è
SMART SOUND
MENU
OPERATE
EXIT
SELECT
Press the MENU when finished
Note:
• BBE and SMART SOUND is for models AV-27S776, AV-32S776, AV-30W776 ONLY.
Note: Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound,
Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Video Status
The Video Status button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
VIDEO STATUS
Dynamic - Gives a vivid picture with better contrast when viewing in
STANDARD
a brightly lit room.
DYNAMIC
Theater - Gives a rich, film-like look to video when viewing in a
THEATER
dimly lit room.
GAME
Game - Used for when you are playing video games connected to
your TV.
Press the VIDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Note:
• You can also change the mode by pressing the π† buttons.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on the
side or front of the TV instead of the remote control. It appears between INITIAL SETUP
and PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus.
Choose VIDEO STATUS by pressing Menu
†
on the side or front panel and choose a mode
by using the CHANNEL+/- buttons (
√
OPERATE ).
®
TheaterPro D6500K
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the THEATERPRO button
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
60 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND
You then have 60 seconds to press the SLEEP TIMER button to
delay the shut off for another 15 minutes.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Display
The display screen shows the current status of timers, inputs, and XDS ID.
Press the DISPLAY button
The screen to the right shows the following information:
05 KLVX PBS
• The current channel or AV input (Channel 05)
JAZZ FESTIVAL
• The current time (12:20 pm)
• Sleep timer status/minutes remaining (The Sleep Timer
is off)
• On/off timer status (Set to turn on everyday at 7:00 PM,
off at 10:00 PM)
NOW
12:20 PM
OFF
SLEEP TIMER
ON/OFF TIMER
EVERYDAY
7:00 PM
ON TIME
OFF TIME
10:00 PM
• Each Press of the DISPLAY button changes the display
mode:
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns display off
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock, sleep timer or on/off timer are not set, the display screen will show:
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the C.C. button
CLOSED CAPTION
OFF
SMART CAPTION
ON
Notes:
• SMART CAPTION is for models AV-27S776, AV-32S776,
AV-30W776 ONLY.
• Smart Caption will appear when you press the Muting button,
only on channels where the broadcast contains closed captioning.
• When you select ON, it will be the mode selected in the Closed Caption Menu.
• See page 40 when you set the caption/text mode.
• You can also change the mode by pressing the π† buttons.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect
This feature will help you adjust the picture you are watching to give you the best possible
picture quality.
Aspect Ratios - AV-30W776
PANORAMA - With this ratio a normal
4:3 aspect picture is stretched to fit the
dimensions of the 16:9 aspect screen.
REGULAR - The regular ratio is used
when you want to watch a 4:3 broadcast
or recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while gray bars
will appear to fill up the remaining space
along the picture’s sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
CINEMA - This ratio “zooms in” on the
center part of a 4:3 aspect picture, blowing
it up to fill the 16:9 screen.
SLIM - This aspect mode shrinks the
screen of 16:9 to 4:3. There are some
programming that is already stretched by
mistake at broadcasting companies, so this
mode corrects it. Gray side bars will appear.
FULL - This is the ratio to use when
watching 16:9 High-Definition broadcasts.
PANORAMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
CINEMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios - AV-27S776, AV-32S776, AV-32S766
4:3 - Use this aspect mode when you
are watching a 4:3 broadcast.
16:9 - Use this aspect mode when you
are watching a 16:9 broadcast. This
is also referred to as "widescreen", for
example on a DVD disc. When you
select this mode, black bars will appear
on the top and bottom of the TV screen.
16:9 - If you select 16:9 aspect mode
while watching a 4:3 broadcast, this
will stretch the picture so as to fit into
the 16:9 format. When you select this
mode, black bars will appear on the top
and bottom of the TV screen.
HD ZOOM - If you are watching a 4:3
high definition broadcast and you select
this aspect mode, it will zoom in on the
picture.
V STRETCH - If you are watching a 4:3
broadcast, this aspect mode will stretch
the picture vertically on your TV
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the ASPECT button, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
AV-30W776
HD (1080i, 720p)
ATSC (1080i, 720p)
NTSC, 480i, 480p
ATSC (480i, 480p)
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
ASPECT
PANORAMA
CINEMA
FULL
SLIM
REGULAR
AV-27S776, AV-32S776, AV-32S766
HD (1080i, 720p)
ATSC (1080i, 720p)
NTSC, 480i, 480p
ATSC (480i, 480p)
ASPECT
4:3
ASPECT
4:3
ASPECT
16:9
16:9
16:9
HD ZOOM
V STRETCH
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing MENU
†
on the side panel and choose a mode by using the CHANNEL
+/- buttons (
√
OPERATE
®
). (AV-30W776 ONLY)
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p). (AV-30W776 ONLY)
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the televison changed it to FULL automatically, the televison will change to the
aspect mode you choosed. (AV-30W776 ONLY)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Favorite
The Favorite button allows you to select your favorite channels easily. First, you must register
the channels that you like. See how to register below.
Press the FAVORITE button
FAVORITE
The favorite channel list will appear.
PREVIOUS
π†
To select the channel you want to watch
101
102
D103
<
CBS
FOX
PBS2
>
Press the OK button
It will change to the channel you have selected.
D107
8
HBO
ABC
Register the favorite channel
NEXT
Press the channel number you want to register
The channel program will change.
Press the FAVORITE button for three seconds
The channel will be registered in the favorite channel list.
Notes:
• Both analog and digital channels can be registered. The digital channels have a "D" in front
of the channel number.
• The maximum number of channels you can register is 24.
• If you have registered the maximum number of channels, and try to register more channels,
the oldest channel you registered will be deleted.
• Sub channels can not be registered.
• The newest channel you registered will appear at the top of the list.
• Regarding digital channels, see pages 62 - 64.
Delete the favorite channel
Press the FAVORITE button
The favorite channel list will appear.
π†
è
To select the channel you want to delete
To enter
Press the OK button
The channel was deleted.
Press the FAVORITE button when finished
Note:
• Before pressing the FAVORITE button when you are finished, press the √® button again, and
you can return to the deleted channel.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the ML/MTS button
MTS
By every press of the ML/MTS button, you change
the mode
ON AIR
STEREO
ON AIR
SAP
MONO
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described
on page 52.
• ML/MTS will not work when you are using the Digital-In.
• You can also change the mode by pressing the π† buttons.
Menu
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
TV/CATV Slide Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 23 for information on programming your remote for cable box operation.
VCR/DVD Slide Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 24.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 24.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Setup
Digital Setup
Use this function when you are receiving a digital broadcast.
Press the MENU button
Digital Setup
Antenna Level
π†
To DIGITAL SETUP
To enter
Digital Sound
PCM
è
Software Version
The onscreen will appear
Notes:
Software Update
• Software Update will only appear when the SD Card
is inserted.
BACK
MENU
Select
Operate
Back
Exit
• If you are watching an analog channel, you can still
access the digital setup menu at anytime, while you are doing this, the background screen
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital
setup menu.
Antenna Level
Confirms the present antenna level.
Antenna Level
Press the MENU button
75
π†
To DIGITAL SETUP
To enter
BACK
MENU
è
Back
Exit
π†
To Antenna Level
To enter
è
Note:
• If you are watching an analog channel, antenna level will not appear.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Setup
Digital Sound
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the MENU button
π†
è
To DIGITAL SETUP
To enter
π†
To Digital Sound
è
To select PCM or DOLBY DIGITAL
Press the MENU button when finished
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 16.
Manufactured under license from Dolby Laboratories. "Dolby", and the
double-D symbol are trademarks of Dolby Laboratories.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Setup
Software Update
At first, insert the SD(Multi-media) card into the memory card slot. This function will appear
only when you insert an SD Card.
Press the MENU button
π†
è
π†
è
π†
To DIGITAL SETUP
To enter
To Software Update
To enter
Checks the card if it needs an update or not
Press the MENU button when finished
Software Version
You can confirm the Software Version.
Press the MENU button
π†
è
To DIGITAL SETUP
To enter
π†
è
è
To Software Version
To enter
Select close when you are finished confirming your software version
Press the MENU button when finished
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Button Functions
Digital CH D/A (Digital/Analog)
The D/A button changes the analog and digital channel. Each time you press the D/A button,
you can switch back and forth the analog and digital channels. Digital channels have a "D" in
front of the channel number.
Note:
• If the cable card is inserted into the TV, you cannot use the D/A button. You can select a
digital channel only.
Press the D/A button
To watch digital channels
For example, to move to channel D23:
Press 2 (Two)
Press 3 (Three)
Press the TUNE button
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the SUB button,
you can select a sub channel easily.
For example, to move to sub channel 123-45:
Press 1 (One)
Press 2 (Two)
Press 3 (Three)
Press the SUB button
Press 4 (Four)
Press 5 (Five)
Press the TUNE button
Note:
• If there are more than 2 major channels, select the digital channel by using the π† buttons
and then press the OK button.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Button Functions
Guide
You can view the program from the GUIDE.
Notes:
• The GUIDE function will only work when you are receiving digital programming only.
• The GUIDE will not show the correct time and date if you have not performed the set clock
function on your television. See page 50.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Information
Weak Signal
This OSD warning appears when the digital channel that you have selected is too weak to
receive or no signal is being detected for that channel.
Weak Signal
15
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 52.
• The tuner (Auto Tuner Setup) could be set improperly. See page 30.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 30.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 31.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 51.
• Check to see if the Sleep Timer was set. See page 54.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 50.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 47.
• The Video Status mode may be turned to the wrong setting. See page 54.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 40% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 40.
• Make sure the MTS settings are correct. See "MTS" on page 60.
Stereo or bilingual
programs can't be
heard
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-27S776
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Reception
Range
•
Power Source
AC 120V, 60Hz
190W
Power
Consumption
Screen Size
27 inch / 68 cm
measured diagonally
4:3Ratio
Audio Output
Speakers
10W + 10W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks
(FIX)
FIX 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
HDMI jack x 1
Digital–In
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Dimensions (In)
WxHxD (cm)
32 3/4 x 23 3/8 x 20 1/2
82.9 x 59.3 x 51.9
Weight (lbs / kg)
Accessories
94.6 / 43
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
Notes:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
• The open source software is embedded in this product. For more information, please go to:
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-30W776
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper
and Ultra bands (181 channel frequency synthesizer system)
Reception
Range
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Power Source
AC 120V, 60Hz
200W
Power
Consumption
Screen Size
30 inch / 95 cm
measured diagonally
4:3 Ratio
Audio Output
Speakers
10W + 10W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks
(FIX)
FIX 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
HDMI jack x 1
Digital–In
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Dimensions (In)
WxHxD (cm)
33 1/8 x 23 1/2 x 21 7/8
83.8 x 59.6 x 55.4
Weight (lbs / kg)
Accessories
116 / 52.6
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
Notes:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
• The open source software is embedded in this product. For more information, please go to:
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-32S776
NTSC, BTSC System (Multi-Channel Sound)
ATSC Terrestrial, Digital Cable
Reception
Format
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper
and Ultra bands (181 channel frequency synthesizer system)
Reception
Range
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Power Source
AC 120V, 60Hz
Power
Consumption
210W
Screen Size
32 inch / 80 cm
measured diagonally
4:3 Ratio
Audio Output
Speakers
10W + 10W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks
(FIX)
FIX 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
HDMI jack x 1
Digital–In
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Dimensions (In)
WxHxD (cm)
37 x 27 x 22 1/2
93.9 x 68.5 x 57.0
Weight (lbs / kg)
Accessories
145.5 / 66
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
Notes:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
• The open source software is embedded in this product. For more information, please go to:
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-32S766
NTSC, BTSC System (Multi-Channel Sound)
ATSC Terrestrial, Digital Cable
Reception
Format
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper
and Ultra bands (181 channel frequency synthesizer system)
Reception
Range
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Power Source
AC 120V, 60Hz
Power
Consumption
210W
Screen Size
32 inch / 80 cm
measured diagonally
4:3 Ratio
Audio Output
Speakers
5W + 5W
2 x 4 3/4 inch / 5 x 12 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks
(FIX)
FIX 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
HDMI jack x 1
Digital–In
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Dimensions (In)
WxHxD (cm)
34 5/8 x 27 5/8 x 22 1/4
87.7 x 69.9 x 56.5
Weight (lbs / kg)
Accessories
142 / 64.5
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
Notes:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
• The open source software is embedded in this product. For more information, please go to:
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
79
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|