JVC CRT Television AV 20420 User Manual

Color Television Users Guide

For Models:

AV-20420

AV-20421

Illustration of AV-20420 and RM-C205

Important Note:

In the spaces below, enter the model and serial number of your television (located at the

rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this

guide. Keep this user's guide in a convenient place for future reference. Keep the carton

and original packaging for future use.

Model Number:

LCT1386-001A-A

Serial Number:

0103-TN-II-IM

Download from Www.Somanuals.com. All Manuals Search And Download.

• As an “ENERGY STAR^®” partner, JVC has determined

that this product or product model meets the

“ENERGY STAR^®” guidelines for energy efﬁciency.

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to

assure your personal safety. But improper use can result in potential electrical shock or ﬁre hazards.

In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its

installation, use and servicing. Also follow all warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one blade of the

plug is wider than the other). This safety feature allows the plug to ﬁt

into the power outlet only one way. Should you be unable to insert the

plug fully into the outlet, try reversing the plug. Should it still fail to ﬁt,

contact your electrician.

(POLARIZED-TYPE)

2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating

instructions for this information. If you are not sure of the type of power supply to your home, consult your

TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken

plugs. They may result in a shock or ﬁre hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord

is subject to trafﬁc or abuse. This may result in a shock or ﬁre hazard.

5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in

a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built-up static charges. Section 810 of the National Electrical

Code provides information with respect to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of

antenna discharge unit, connection requirements for the grounding electrode.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 An outside antenna system

should not be located in the

vicinity of overhead power lines

or other electric light or power

circuits, or where it can fall into

such power lines or circuits.

When installing an outside

antenna system, extreme care

should be taken to keep from

touching such power lines or

circuits as contact with them

might be fatal.

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRICAL

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

EXAMPLE OF ANTENNA

GROUNDING AS PER

NATIONAL ELECTRICAL

CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ARTICLE 250, PART H)

NEC - NATIONAL ELECTRIC CODE

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to

be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.

— Never cover the openings with a cloth or other material.

— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.

— Do not try to roll a cart with small casters across thresholds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit

approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some

internal parts carry hazardous voltages and contact can result in a ﬁre or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may

result in a hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

PORTABLE CART WARNING (Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended

for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will

prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the

following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the TV set.

C. If the TV set has been exposed to rain or water.

D. If the TV set does not operate normally by following the operating instructions. Adjust only those

controls that are covered in the operating instructions as improper adjustment of other controls may

result in damage and will often require extensive work by a qualified technician to restore the TV set

to normal operation.

E. If the TV set has been dropped or damaged in any way.

F. When the TV set exhibits a distinct change in performance — this indicates a need for service.

16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing that the replacement

parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified

replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform

the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube

implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Quick Setup . . . . . . . . . . . 7

Initial Setup . . . . . . . . . . 33

Unpacking your TV . . . . . . . . . . . . 7

TV Models . . . . . . . . . . . . . . . . 8

TV Remote Controls . . . . . . . . . . . 9

Getting Started . . . . . . . . . . . . . 10

The Remote Control . . . . . . . . . . 10

Connecting Your Devices . . . . . . . . 11

Auto Tuner Setup . . . . . . . . . . . . 15

Language . . . . . . . . . . . . . . 33

Closed Caption . . . . . . . . . . . 33

Background . . . . . . . . . . . . 34

Button Functions . . . . . . . 35

Menu . . . . . . . . . . . . . . . . . . 35

Exit . . . . . . . . . . . . . . . . . . . 35

Display . . . . . . . . . . . . . . . 35

Input . . . . . . . . . . . . . . . 35

Video Status . . . . . . . . . . . . . . . 36

Sleep Timer . . . . . . . . . . . . . . 36

Muting . . . . . . . . . . . . . . . . . . 36

VCR Buttons . . . . . . . . . . . . . . . 36

Return + . . . . . . . . . . . . . . . 37

Power . . . . . . . . . . . . . . . . . . 37

Number Buttons - 10key Pad . . . . . . 37

Channel +/– . . . . . . . . . . . . . . . 37

Volume +/– . . . . . . . . . . . . . . . 37

100+ . . . . . . . . . . . . . . . . . . 37

Onscreen Menus . . . . . . . . 16

Using the Guide . . . . . . . . . . . . . 16

Initial Setup . . . . . . . . . . 17

Auto Tuner Setup . . . . . . . . . . . . 17

Channel Summary . . . . . . . . . . . . 18

V-Chip . . . . . . . . . . . . . . . . . . 19

Set Lock Code . . . . . . . . . . . . . 26

Picture Adjust . . . . . . . . . 27

Picture Settings . . . . . . . . . . . . . 27

Adjust Picture Settings . . . . . . . . . 27

Noise Muting . . . . . . . . . . . . . . 27

Set Video Status . . . . . . . . . . . . . . 28

Appendices . . . . . . . . . . 38

Troubleshooting . . . . . . . . . . . . . 38

Warranty . . . . . . . . . . . . . . . . . 39

Authorized Service Centers . . . . . . . 41

Specifications . . . . . . . . . . . . . . 42

Note . . . . . . . . . . . . . . . . . . . 43

Sound Adjust . . . . . . . . . 29

Sound Settings . . . . . . . . . . . . . 29

Adjust Sound Settings . . . . . . . . . 29

MTS (Multi-channel Sound) . . . . . . . 29

TV Speaker . . . . . . . . . . . . . . 30

Clock Timers . . . . . . . . . . 31

Set Clock . . . . . . . . . . . . . . . . 31

On/Off Timer . . . . . . . . . . . . . . . 32

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Unpacking Your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new

television, please check to make sure you have all of the following items. In addition to this

guide, your television box should include:

Two AA

Batteries

1 Remote Control

1 Television

��

�

��

�

��

�

Note: Your television

and/or remote

��

control may differ

from the examples

illustrated here.

��

�

��

Once you have unpacked your television, the next step is to connect it to your antenna/

cable or satellite system and to connect the audio/video devices you want to use with your

television. To make these connections you will use plugs like the ones illustrated below.

Coaxial Cables

Component Cables

Composite Cables

Audio Cables

Used to connect an

external antenna or

cable TV system to

Used to connect

your TV.

audio/video devices

like VCRs, DVD players,

stereo amplifiers, game

consoles, etc.

We recommend that before you start using your new television, you read your entire User’s

Guide so you can learn about your new television’s many great features. If you’re anxious to

start using your television right away, a quick setup guide follows on the next few pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

MODELS:

AV-20420

AV-20421

��

��Ω

��

�

��

�

��

�

Front Panel Diagram

MODELS:

AV-20420

AV-20421

��

�

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Remote Controls

��

�

��

�

��

�

��

�

��

�

��

RM-C205

RM-C205W

MODEL:

AV-20420

AV-20421

• For information on remote control buttons, see pages 35 - 37.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

Raise the latch on the remote's back cover to remove. Insert two batteries carefully noting the

“+” and “–” markings, placing the “–” end in the unit first. Snap the cover back into place.

Key Feature Buttons

��

The four key feature buttons at the center of the remote

can be used for basic operation of the television. The

top and bottom buttons will scan forward and back

through the available channels. To move rapidly through

the channels using JVC’s Hyperscan feature, press

and hold CH+ or CH–. The channels will zip by at a rate

of five channels per second. The right and left buttons

will turn the volume up or down. These buttons are

also marked with four arrows and are used with JVC’s

onscreen menu system. To use the onscreen menus,

press the MENU button.

�

��

�

��

Note: Illustration of remote

control RM-C205

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Basic Operation

��

Turn the television on and off by pressing the POWER button at the top right corner

of the remote.

�

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then,

refer to the appropriate diagrams to connect your television to other devices that you may

have. After you are finished connecting your devices, plug the power cord into the nearest

power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the

television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Diagram #1

Illustration of AV-20420

��

��Ω

��

�

��

�

��

�

��

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of

the TV.

Diagram #2

��

Illustration of AV-20420

��

��Ω

��

�

��

�

��

�

��

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s

LEFT AUDIO INPUT.

• Your VCR must be turned on to view premium cable channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly

with this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.

Diagram #3

��

��Ω

��

�

��

�

��

�

Illustration of AV-20420

Connecting to an External Amplifier

��

��Ω

��

�

��

�

��

�

Illustration of AV-20420

1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to

the LEFT AUDIO INPUT on the amplifier.

2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to

the RIGHT AUDIO INPUT on the amplifier.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using

the front input jacks. You can also connect these using the television’s rear input jacks,

using the same instructions.

Illustration of AV-20420

��

�

��

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the front of the TV.

2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the

LEFT AUDIO IN on the front of the TV.

3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the

RIGHT AUDIO IN on the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to

the LEFT AUDIO IN.

Headphone Connection

You can connect a pair of headphones to the television using the headphone jack located on

the front of the TV.

1) Plug a headphone jack into the headphone jack on the television’s front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Auto Tuner Setup

Step 3 – Auto Tuner Setup

JVC’s onscreen menu system lets you set your television up to meet your own personal viewing

preferences. The menu screens and their features are discussed in detail in this book. The

menu settings are optional, you can set as many or as few of them as you wish. But to begin

watching your television right away you will need to run the Auto Tuner Setup. This lets your

television learn the channels it is able to receive. To run the Auto Tuner Setup follow the steps

below.

Press the Menu button on the remote control.

Press the π† buttons to move to AUTO TUNER SETUP

Press the √® buttons to begin AUTO TUNER SETUP

TUNER MODE

CABLE AIR

START

√®

To choose CABLE (if you are connected to a cable system) or AIR (if you use an

antenna)

π†

To move to START

√®

To start Auto Tuner Setup

The Auto Tuner will now memorize all of the clear, active channels your television can receive.

This will take one or two minutes.

NOW

PROGRAMMING !

When the setup is finished, PROGRAMMING OVER ! is displayed. Your quick setup is now

complete. You can now begin watching your television, or you can continue on in this guide

for more information on programming your remote control, or using the JVC onscreen menu

system to customize your television viewing experience.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending

on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is

normal.

The Quick Setup is complete

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your

new television. The ones you will see most frequently are:

π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–

buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right

to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote

control. (Button names appear in SMALL CAPITAL LETTERS.)

To bring up the onscreen menu, press the MENU button on the remote control. The item that

appears in yellow is the one currently selected.

��

Notes:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen

displays.

• If you do not press any buttons for a few seconds, the onscreen menu will automatically

shut off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Tuner Setup

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please

skip ahead to “Channel Summary” to continue setting up your television.

In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing

the active ones and skipping over blank ones or channels with weak signals. This means when

you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.

Press the MENU button

NOW

PROGRAMMING !

π†

√®

π†

√®

To AUTO TUNER SETUP

To operate

To choose CABLE or AIR

To move to START

Programming will take approximately

1 to 2 minutes.

To start Auto Tuner Setup

PROGRAMMING OVER!

• Noise Muting will not work during Auto Tuner Setup.

Note:

• Some cable systems experience interference from radio frequencies on cable Channel 95.

You may delete this channel from your scan by removing the “X” next to it on the Channel

Summary screen shown on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Channel Summary

Channel Summary allows you to customize the line-up of channels received by your TV.

You can add or delete channels from the line-up or prevent any unauthorized viewers from

watching any or all 181 channels.

Press the MENU button

�

��

π†

To CHANNEL SUMMARY

To operate

�

√®

The Channel Summary screen (right) will now be

displayed with the channels set to scan marked

with an “X”. You can delete channels from the

scan by removing the “X”. If any channels were

missed during Auto Tuner Setup and you wish to

add them, you may by placing an “X” next to the

channel number.

��

�

��

�

��

π†

To the ADD column

��

√®

To include or delete from scan

EXIT when finished

You can block access to a channel by activating the Channel Lock.

π†

√®

π†

To CHANNEL SUMMARY

To operate

To the Lock Column

ZERO to lock or unlock that channel

EXIT when finished

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter

the Lock Code using the 10 key pad.

If the wrong code is entered, the message

“INVALID LOCK CODE!” will flash on the screen:

THIS CHANNEL IS LOCKED BY

CHANNEL GUARD.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

NO. - - - -

The channel cannot be accessed until the

correct code is entered.

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 26.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

V-Chip

Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United

States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to

program your TV to receive, or not to receive, programs based on content according to the

guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer

attempts to watch a blocked channel, this message appears:

The channel will remain blocked until the correct

THIS PROGRAMMING EXCEEDS

lock code is entered (see page 26 for information

on setting your lock code). You can customize the

YOUR RATING LIMITS.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

NO. - - - -

V-Chip settings of your television to match your

personal tastes. The V-Chip menu below is the

starting point for your V-Chip settings.

You can use US V-Chip settings (for programming

broadcast from the United States), Canadian

V-Chip settings (for programming broadcast from

Canada), and movie ratings. You may use any or all of

the settings (US V-Chip, Canada V-Chip, Movie ratings).

Descriptions for setting each of the three V-Chip

formats appear in the next seven pages

��

along with descriptions of the rating categories.

��

To access the rating categories:

Press the MENU button

π†

√®

To V-CHIP

To operate (Lock icon

will appear)

Press ZERO to access the V-Chip menu

√®

π†

To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)

To move to SET US TV RATINGS, SET MOVIE RATINGS, or

SET CANADIAN RATINGS, (see following pages for descriptions of each item).

Special Note about Ratings

Some programs are not broadcast with a ratings signal. Therefore, even if you setup V-Chip

ratings limits, these programs will not be blocked. Parents are cautioned to preview the

contents of these programs or movies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS

Programs with the following ratings are appropriate for children.

 TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including

children ages 2 - 6.

 TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs

may contain some mild fantasy violence or comedic violence, which children should be able

to discern from reality.

Programs with the following ratings are designed for the entire audience.

 TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or no

violence, no strong language, and little or no sexual dialog or situations.

 TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive

sexual dialog or situations. It is recommended that parents watch these programs first, or

with their children.

 TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14

including possible intense violence, sexual situations, strong coarse language, or intensely

suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

 TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17 years

of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of

content are also supplied with the V-Chip rating. These types of content may also be

blocked. The content types are:

• V/FV is for VIOLENCE/FANTASY VIOLENCE

• S stands for SEXUAL CONTENT

• L stands for strong LANGUAGE

• D stands for suggestive DIALOG

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Setting US V-Chip Ratings

Press the MENU button

��

π†

√®

To V-CHIP

To operate (lock icon

appears)

Press ZERO to access the V-Chip menu

��

√®

π†

√®

To turn V-Chip ON or OFF

To move to SET US TV RATINGS

To operate

��

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and

press the or to move the cursor to the correct location. Press or to turn the

locking feature on or off. An item is locked if the icon appears instead of a “—”.

†

√

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that

column and add a lock icon. Once you’ve put a lock on the top row, everything in that column

is automatically locked.

TV TV TV TV TV TV

��

�

��

�

π†

√®

π†

√®

To the TV 14 Column

To turn on the lock

��

To FINISH

�

To save settings and exit

Press the Exit button when finished

��

Note:

• If you want to change the setup, move the cursor to the top column and change the lock

icon to “—” by pressing or again. You may then select individual categories to block.

√

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Setting Ratings with the V-Chip Button

To access Rating information about a certain program, press the V-CHIP button while viewing

that program. A display like this will appear:

PROGRAM IS RATED

TV-PG - V

If you decide you want to block this category of viewing, press “0” while the above screen is

visible, and all programs from that category will be blocked.

Example 1:

If you want to set your V-Chip settings to block all programming above TV PG:

Press ZERO when TV-PG is displayed

TV TV TV TV TV TV

��

�

��

�

��

�

��

All Programming above TV PG will be blocked.

Example 2:

If you want to set your V-Chip settings to block all programming above a current setting such

as TV PG-V (with violence):

Press ZERO when TV-PG - V is displayed

TV TV TV TV TV TV

�

��

�

��

�

��

All Programming above TV PG - V (with Violence) will be blocked.

• For Children’s programming you can block TV-Y and Y7 programs by Pressing “0” when Y

is displayed during a program. Programming for audiences other than children’s audiences

will not be affected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Movies Ratings

 NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries

which do not use the MPAA ratings system. Other NR films may be from amateur producers

who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including

children’s programming, foreign programs, or adult material.

 G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content,

violence, or language that would be unsuitable for audiences of any age.

 PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence,

some brief nudity, and strong language. The contents are not deemed intense.

 PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may

include more explicit sexual, language, and violence content than movies rated PG.

 R – Restricted

These films contain material that is explicit in nature and is not recommended for

unsupervised children under the age of 17.

 NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children

to view. Content can consist of strong language, nudity, violence, and suggestive or explicit

subject matter.

 X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (Lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET MOVIE RATINGS

To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

π†

√®

π†

√®

π†

√®

To the X Column

^�_��

�

^�_��

��

�

��

To turn on the lock

To the NC-17 Column

To turn on the lock

��

To FINISH

��

To save settings and exit

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Canadian V-Chip Ratings

 E – Exempt

Exempt programming includes: news, sports, documentaries and other information

programming, talk shows, music videos, and variety programming.

 C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive

behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or

unrealistic in nature.

 C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low

intensity and will show the consequences of the acts. There will be no offensive language,

nudity or sexual content.

 G – General Audience

Programming will contain little violence and will be sensitive to themes which could affect

younger children.

 PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger

children. Parents may consider some content not appropriate for children aged 8-13.

 14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and

early teens. Programming may contain mature themes and scenes of intense violence.

 18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET CANADIAN RATINGS ENG (for English)

To enter ratings menu

For example:

To block viewing of programming rated 14+ and 18+:

π†

√®

To the 18+ Column

To turn on the lock

��

�

��

�

π†

√®

π†

To the 14+ Column

To turn on the lock

��

To FINISH

��

√®

To save settings and exit

��

Note:

• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 24 in the

French side of this user’s guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal.

Programming on television stations which do not broadcast rating signals will be placed in the

“Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins

• News

• Locally Originated Programming

• Political Programs

• Public Service Announcements • Religious Programs

• Sports

• Weather

• Some Commercials

Note:

• TV programs or movies that do not have rating signals will be blocked if the unrated

category is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

Press the MENU button

π†

To V-CHIP

√®

To operate (The lock icon

appears)

Press ZERO to access V-Chip setup options

π†

To UNRATED

UNRATED

VIEW

BLOCK

√®

To VIEW or BLOCK

Press EXIT when done

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes

pre-set with a lock code of “0000”. You may change the code to any four-digit number you

wish. To change the lock code, follow the steps below.

Press the MENU button

π†

To SET LOCK CODE

To operate (lock icon

√®

appears)

Press ZERO to access the lock code

��

�

� � � �

��

The first digit will be highlighted

√®

π†

To select the number

To move to the next digit

Continue to follow these directions for all four numbers

π†

To FINISH

√®

To save settings and exit

(your lock code is now set)

When a viewer attempts to watch a blocked channel, this message appears:

THIS PROGRAM IS LOCKED BY

CHANNEL GUARD.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

NO. - - - -

The channel will remain blocked until the correct lock code is entered (see above for

information on setting your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or

subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker

or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

Adjust the Picture Settings

Press the MENU button

��

π†

To TINT, COLOR, PICTURE, BRIGHT or

DETAIL

��

√ ®

π†

To enter

To adjust the setting

To move to the next setting

��

Noise Muting

This feature inserts a blank blue screen over channels which are not broadcasting or are too

weak to be received clearly.

Press the MENU button

π†

To NOISE MUTING

√®

To turn noise muting ON or OFF

Note:

• Noise muting will not work during auto tuner setup or when you operate channel summary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Set Video Status

With Set Video Status, you can save your own set of picture quality adjustments as “Choice”

and have access to them at the touch of a button.

Press the MENU button

��

π†

√®

π†

To SET VIDEO STATUS

To operate

��

To set the TINT levels

To move to the next option

��

Repeat these steps until all levels are set.

��

π†

To SAVE AS CHOICE

√®

To save settings and exit

• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your

preferences will not be saved.

• You can access your “Choice” settings at any time by pressing the VIDEO STATUS button on

the remote control.

Note:

The setting screen will disappear if you do not make any adjustments or move to the next

setting in approximately three seconds. Any changes you have made to picture settings up to

that point will be stored. You can exit the Picture Settings menu at any time by pressing the

EXIT button on the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjust

Sound Settings

These settings allow you to change and adjust the way the picture appears on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with

the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

Adjust the Sound Settings

Press the MENU button

π†

√ ®

π†

To BASS, TREBLE or BALANCE

To adjust the setting

To move to the next setting

Press the EXIT button when finished

MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be broadcast at once, giving you a choice

in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the MENU button

π†

To MTS

√®

Select the mode

(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).

Notes:

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjust

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the

audio through your stereo.

Press the MENU button

π†

To TV SPEAKER

TV SPEAKER

OFF

√®

To turn the TV’s speakers ON or OFF

EXIT when finished

• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume

level is low! If the TV volume is set too high, the sound level will be extremely loud.

• After a power interruption, the TV Speaker settings will return to “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

Set Clock

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely

set your clock using the XDS time signal broadcast by most public broadcasting stations. If

you do not have this in your area, you will have to set the clock manually. See manual clock

set below. To set the clock using the XDS signal:

Press the MENU button

π†

To SET CLOCK

To operate

√®

When you set the clock automatically, choose AUTO by pressing the

√

arrows.

π†

√®

π†

√®

†

To TIME ZONE

MODE

AUTO

MANUAL

EASTERN

To select your time zone

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

To FINISH

TIME ZONE

D.S.T.

OFF

FINISH

√®

To save settings

When you set the clock manually, choose MANUAL by pressing the

√

arrows.

π†

√®

π†

√®

†

To move to the hour

To set the hour

MODE

TIME

AUTO

MANUAL

--:-- --

To move to minutes

To set the minutes

To START CLOCK

To operate

START CLOCK

√®

THANK YOU !!

Notes:

• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight

Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The

clock will move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an

alarm to wake up, to help you remember important programs, or as a decoy when you’re not

home.

Press the MENU button

π†

√®

†

To ON/OFF TIMER

To operate (begins with ON TIME)

To set the hour (AM/PM) you want the TV to turn on

To move to minutes

√®

†

To set the minutes

To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the

OFF TIME the same way as ON TIME

†

√®

†

To accept OFF TIME and move to CHANNEL

To select channel

To move to MODE

√®

Choose ONCE or EVERYDAY

†

√®

†

To ON/OFF TIMER

Choose YES to accept the timer setting, choose NO if you don’t wish to accept

To FINISH

√®

To save settings

Press the EXIT button when finished

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Language

You can choose to view your onscreen menus in three languages: English, French (Français)

or Spanish (Español).

Press the MENU button

π†

To LANGUAGE

√®

To choose a language

��

EXIT when finished

Closed Caption

Many broadcasts now include an onscreen display of dialog called CLOSED CAPTIONS.

Some broadcasts may also include displays of additional information in text form. Your

television can access and display this information using the CLOSED CAPTION feature. To

activate the closed caption feature, follow the steps below.

Press the MENU button

��

π†

To CLOSED CAPTION

��

√®

π†

√®

To operate

To select CAPTION, TEXT, or OFF

To move to CAPTION or TEXT

��

To select a caption (CC1 to CC4) or text

channel (T1 to T4)

��

π†

To accept that selection and move to

FINISH

√®

To save settings and exit

Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs

may include additional text information which is usually found on text channel T1. The other

channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are

playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the

program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Background

This feature inserts either a black or clear background behind the onscreen menu displays.

Press the MENU button

π†

To BACKGROUND

BACKGROUND

BLACK CLEAR

√®

To turn Set Background to BLACK or CLEAR

EXIT when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate

the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

Exit

Use this button to enter or exit the TV’s onscreen menus.

Display

The display screen shows the current status of timers and inputs.

Press the DISPLAY button

The screen to the right shows the following information:

• The current channel or AV input (Channel 05)

NOW

SLEEP TIMER

ON/OFF TIMER

ON TIME

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The

Sleep Timer is off)

• On/off timer status (Set to turn on everyday at

7:00 PM, off at 10:00 PM)

• Each Press of the DISPLAY button changes the

display mode:

12:20 PM

OFF

EVERYDAY

7:00 PM

10:00 PM

OFF TIME

��

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing EXIT.

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

Input

Selects the signal input source for the television: TV, for Antenna or Cable; Video 1; or Video 2,

for video devices like VCRs, DVD players, or camcorders.

INPUT

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Video Status

The Video status button gives you a choice of four TV picture display settings, including a

display of your own preferences.

STANDARD - Resets the picture display to the factory settings.

CHOICE - Displays the setting levels you specified on the “Set Video Status” Menu

(see page 28).

GAME - Used for when you are playing video games connected to your TV.

Press the VIDEO STATUS button

By every press of the video status button, you change the mode.

CHOICE

GAME

STANDARD

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals

of 15 minutes, for a total time of up to 180 minutes.

Press the SLEEP TIMER button

0 15 30 45 60 75 90 105 120 135 150 165 180

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND.

You then have 20 seconds to press the sleep timer button to delay the shut off for another

15 minutes.

Muting

The muting button instantly turns the volume down completely when you press it. Press

MUTING and the volume level will instantly go to zero. To restore the volume to its previous level,

press MUTING again.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions

include: play, record, rewind, fast-forward, stop, pause, channel scan, TV / VCR, power on,

and power off.

• Please note: The RM-C205 and RM-C205W remote controls can only be used with JVC

brand VCRs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Return +

The return+ button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

RETURN+ and hold for three seconds

RETURN CHANNEL

PROGRAMMED !

The channel currently active has been programmed as your return+ channel. Now scan

through the channels using the CHANNEL+/– buttons.

RETURN+

You will return to your programmed channel.

• To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel

return+.

Power

Turns the TV on or off.

Press the POWER button

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For

example, to move to channel 7:

0 (Zero)

7 (Seven)

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to recieve.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

100+ Button

Use the 100+ button to directly access channels above channel 99. For example, to move to

channel 124, press 100+, 2 (Two), 4 (Four).

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

PROBLEMS

CHECK

There is no power

• See if the power cord became unplugged.

• Check for a blown fuse or circuit breaker or a power outage.

There is no picture

or sound

• The antenna could be disconnected.

• The input mode could be set improperly. See page 35.

• The tuner (Auto Tuner Setup) could be set improperly. See page 17.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not • Check to see that the batteries are still working and properly installed.

operating properly or • Make sure the remote has a clear sight path to the TV.

at all

You cannot select a

certain channel

• You may be too far from the TV. You must be within 23 feet (7 meters).

• Make sure the channels have been programmed. See "Channel Summary", page 18.

• Check to see if the channel is locked. See "Channel Summary - Lock" page 18.

The power turns off

by itself

• Make sure the set did not become unplugged.

• Perhaps the On/Off Timer is set. See page 32.

• Check to see if the Sleep Timer was set. See page 36.

The clock is wrong

• The power was interrupted and the clock was not reset. See page 31.

• There is a problem with the TV. Unplug the set and call for service.

The On Timer is

blinking

The color quality

is poor

• Tint and Color may be improperly adjusted. See page 27.

• The Video Status mode may be turned to the wrong setting. See page 28.

There are lines

across the picture

• There could be interference from another electrical appliance, such as a computer,

another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

operating nearby. Move the antenna away from the appliance or change to a coaxial

cable connection which is less prone to interference.

The picture is spotted

There are double

pictures (ghosts)

• A building or passing airplane can reflect the original signal and produce a second,

slightly delayed one. Adjust your antenna position.

Picture is snowy

(image noise)

• Your antenna may be damaged, disconnected or turned. Check the antenna

connection. If the antenna is damaged, replace it.

Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 33.

Stereo or bilingual

programs can't be

heard

• Make sure the MTS settings are correct. See "MTS" on page 29.

There is no sound

• The TV Speaker option may be turned off. See page 30.

from the TV's speakers

Static electricity

• It is normal to feel static electricity if you brush or touch the screen.

You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless

crackling sounds

the sound or picture become abnormal, this is fine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

For Canadian model televisions, see the separate sheet for Canadian

Warranty information.

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth

below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE

MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period

shown below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)

Parts

Labor

1 YEAR

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE

DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective within the warranty period, JVC will repair

or replace defective parts at no charge to the original owner. Such repair and

replacement services shall be rendered by JVC during regular business hours at

JVC authorized service centers. Parts used for replacement are warranted only for the

remainder of this Warranty Period. All products and parts thereof may be brought to

a JVC authorized service center on a carry-in basis. Televisions with a screen size of 25

inches and larger may be covered on an in-home basis where such service is available.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

To determine if in-home service is available in your area, either contact the selling dealer

(retailer) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service

locations can also be obtained from our website http://www.jvcservice.com. In-home service,

if available, will require clear access to the Television by the service representatives. If in-

home service is not available, carry in service will be provided.

If service is not locally available, box the product carefully, preferably in its original

carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of

the problem to the nearest JVC Factory Service Center, the name and location which will

be given to you by the toll free number.

If you have any questions concerning your JVC Product, please contact our Customer

Relations Department.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1) Products which have been subject to abuse, accident, alteration, modification,

tampering, negligence, misuse, faulty installation, lack of reasonable care, or if

repaired or serviced by anyone other than a service facility authorized by JVC to

render such service, or if affixed to any attachment not provided with the products,

or if the model or serial number has been altered, tampered with, defaced or

removed;

2) Initial installation, installation and removal from “built-in” entertainment centers and

other mounting systems;

3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video

and audio head cleaning;

4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;

5) Signal reception problems and failures due to line power surge;

6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for

90 days from the date of purchase;

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

7) Accessories;

8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of

purchase.)

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED

WARRANTY OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS

WARRANTY HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE,

OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL

(INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS)

RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH

OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE

LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or

limitations on how long the warranty lasts, so these exclusions or limitations may not

apply to you. This warranty gives you specific legal rights and you may also have other

rights which vary state to state.

JVC COMPANY OF AMERICA

1700 Valley Road

DIVISION OF JVC AMERICAS CORP.

Wayne, New Jersey 07470

http://www.jvcservice.com

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY

DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.

PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION

PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. and Serial No. which is located either on the rear, bottom or

side of the cabinet.

Retain this information for future reference.

Model No.:

Serial No.:

Purchase Date:

Name Of Dealer:

Download from Www.Somanuals.com. All Manuals Search And Download.

Authorized Service Centers

QUALITY

SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

TOLL FREE: 1 (800) 537-5722

http://www.jvc.com

Dear Customer,

In order to receive the most satisfaction from your purchase, please read the

instruction booklet before operating the unit. In the event that repairs are necessary,

please call 1 (800) 537-5722 for your nearest authorized servicer or visit our website

at www.JVC.com

Remember to retain your Bill of Sale for Warranty Service.

Do not service the television yourself

Caution

To prevent electrical shock, do not open the cabinet. There are no user serviceable

parts inside. Please refer to qualified service personnel for repairs.

Accessories

To purchase accessories for your JVC product, please call toll free:

1 (800) 882-2345 or on the web at www.JVC.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

MODEL

AV-20420

AV-20421

NTSC, BTSC System

(Multi-Channel Sound)

Reception Format

Reception Range

VHF 2 to 13, UHF 14 to 69

Sub Mid, Mid, Super, Hyper and Ultra bands

(181 channel frequency synthesizer system)

Power Source

AC 120V, 60Hz

87W / 1.4A

Power

Consumption

Screen Size

20 inch / 51 cm

measured diagonally

full square

Audio Output

Speakers

1W + 1W

2 x 3 1/2 / 5x9 cm

oval x 2

Antenna Terminal

75 ohms (VHF/UHF) (F-type connector)

External Input

Jacks

Video: 1 Vp-p, 75 ohms

Audio: 500mVrms (-4dBs) high impediance

500 mVrms (-4 dBs)

Low impedance

(400 Hz when modulated

100%)

Audio Output

(FIXED)

Headphone Jack

Ø3.5 mm x 1

19 7/8 x 17 7/8 x 19 1/2

50.3 x 45.2 x 49.3

Dimensions (Inch)

WxHxD (cm)

43.8 / 19.9

Weight (lbs / kg)

Accessories

Remote control unit x 1 / AA batteries x 2

Specifications subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Download from Www.Somanuals.com. All Manuals Search And Download.

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

JVC CANADA, INC.

21 Finchdene Square

Scarborough, Ontario

Canada, M1X 1A7

Wayne, New Jersey, 07470

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia Car Satellite TV System NS 24E400NA14 User Manual
Intel Personal Computer BLKDC53427HYE User Manual
JBL Speaker IBT User Manual
Kambrook Blender KBL120 User Manual
Kenmore Air Cleaner 106832 User Manual
KitchenAid Food Processor KFP0722 User Manual
KitchenAid Outdoor Cart KFBP100LSS User Manual
KitchenAid Range KSHS22Q User Manual
KitchenAid Ventilation Hood Pro LineTM User Manual
Koolatron Refrigerator WC04 User Manual