JVC CRT Television 0300 T CR JMUK User Manual

COLOUR TELEVISION  
AV-28WFT1EI  
CONTENTS  
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . 2  
PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
T-V LINK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 7  
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . 8  
REMOTE CONTROL BUTTONS AND FUNCTIONS . 11  
MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 16  
PICTURE SETTING. . . . . . . . . . . . . . . . . . . . . . . . . 17  
PICTURE FEATURES. . . . . . . . . . . . . . . . . . . . . . . 18  
SOUND SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
ADDITIONAL MENU OPERATIONS . . . . . . . . . . . . 30  
ADDITIONAL PREPARATION. . . . . . . . . . . . . . . . . 32  
TV BUTTONS AND PARTS. . . . . . . . . . . . . . . . . . . 34  
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . 35  
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . Back cover  
INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for buying this  
colour television.  
To make sure your fully understand how to use your new TV, please read this manual thoroughly before you begin.  
6$)(7<#35(&$87,216  
:DUQLQJ  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EX-  
POSE THIS APPLIANCE TO RAIN OR MOISTURE.  
&DXWLRQ  
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOL-  
LOWING RULES REGARDING THE USE OF THIS UNIT.  
1 Operate only from the power source specified (AC 220 –  
240 V, 50 Hz) on the unit.  
2 Avoid damaging the AC plug and power cord.  
3 Avoid improper installation and never position the unit  
where good ventilation is unattainable.  
When installing this television, distance recommendations  
must be maintained between the floor and wall, as well as  
instalment in a tightly enclosed area or piece of furniture.  
Please adhere to the minimum distance guidelines shown  
for safe operation.  
15 cm  
10 cm  
10 cm  
15 cm  
4 Do not allow objects or liquid into the cabinet openings.  
5 In the event of a fault, unplug the unit and call a service  
technician. Do not attempt to repair it yourself or remove  
the rear cover.  
6 When you don’t use this TV set for a long period of time, be  
sure to disconnect the power plug from the AC outlet.  
7 Do not hold the front panel door when moving the TV, if you  
do you may break it.  
How To Replace The Fuse  
Open the fuse compartment  
with a blade screwdriver, and  
replace the fuse.  
Fuse  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
*XLGHOLQHV#IRU#6DIH#2SHUDWLRQ  
This equipment has been designed and manufactured to comply with international safety standards. However, as with any elec-  
trical appliance, care must be taken to ensure optimal results and operational safety.  
• Before attempting to use this equipment, read the operating instructions thoroughly.  
• Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made in accordance with the  
manufacturer’s instructions.  
• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.  
• Handle all glass panels or covers with care.  
• Never operate this equipment if it appears damaged or operates abnormally. Turn the power off, disconnect the main power  
plug and consult your dealer.  
• Never remove any affixed panels or covers. Doing so may result in electrical shock.  
• Never leave this equipment operating unattended unless otherwise specifically stated that it is designed to do so or in standby  
mode. Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do  
so. Make special arrangements for infirm or handicapped persons.  
• Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.  
• Never listen to headphones at high volume. Doing so may damage your hearing.  
• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage.  
• Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs,  
use only the fixtures provided and follow the installation instructions.  
• Never allow this equipment to be exposed to rain or moisture.  
• Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may result in a fatal electrical  
shock.  
• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
35(3$5$7,21  
&RQQHFWLQJ#WKH#$HULDO#DQG#9&5  
If connecting a VCR, follow A  
If not connecting a VCR, follow 1  
B
C
2 .  
D .  
AC Outlet  
(AC 220 - 240 V,  
50 Hz)  
*1: To operate T-V LINK functions, a T-V LINK compatible  
VCR must be connected to the EXT-2 terminal on the TV.  
For details about T-V LINK functions, see “T-V LINK  
FUNCTIONS” on page 7.  
VHF/UHF Aerial  
Note:  
For further details, refer to the manuals provided with the  
devices to be connected.  
Power  
Cord  
The connecting cables are not provided.  
75-ohm  
Coaxial  
Cable  
A video can be viewed from the VCR without performing  
C . For details, refer to your VCR instruction manual.  
EXT-2  
EXT-3  
*1  
S
S
To connect additional external devices, please see “AD-  
DITIONAL PREPARATION” on page 32.  
L
R
EXT-1  
AUDIO OUT  
To connect external speakers and audio system, please  
see “Connecting Speakers/Amplifier” on page 33.  
Aerial  
Plug  
When a decoder is connected to a T-V LINK compatible  
VCR, set the DECODER (EXT-2) function to ON. For de-  
tails, see “Using the DECODER (EXT-2) function” on  
page 30. Otherwise, you will not be able to view scram-  
bled channels.  
21-pin SCART Cable  
Aerial Plug  
75-ohm Coaxial  
Cable  
VCR  
To Aerial  
Input  
Aerial Plug  
To Aerial  
Output  
AV IN/OUT  
Terminal  
3XWWLQJ#%DWWHULHV#LQWR#WKH#5HPRWH#&RQWURO  
Use two AAA/R03 dry cell batteries.  
Insert the batteries from the ó end, making sure the ô and ó  
polarities are correct.  
To open the battery compartment, slide the door downwards  
and lift off. Replace the door by sliding it upwards until it is se-  
cure.  
Note:  
Follow the warnings printed on the batteries.  
Battery life is about six months to one year, depending on  
your frequency of use.  
If the remote control does not work properly, replace the  
batteries.  
The batteries we supply are only for setting up and test-  
ing your TV, please replace them as soon as necessary.  
Always use good quality batteries.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
,QLWLDO#6HWWLQJV  
When the TV is first turned on, it enters the initial setting  
mode, and the JVC logo is displayed. Follow the instructions  
on the on-screen display to make the initial settings.  
1
Press the Main power button on the TV.  
The Power lamp lights red (for power on), then green (for  
TV on) and the JVC logo is displayed.  
Note:  
If the power lamp stays red and does not change to  
green:  
Main power button  
Your TV is in the standby mode. Press the  
(Standby) button on the remote control to turn your  
TV on.  
=
Power lamp  
The JVC logo does not appear when your TV has  
been turned on once.  
In this case, use the “LANGUAGE” and “AUTO PRO-  
GRAM” functions to make the initial settings. For de-  
tails, see “INSTALL” on page 25.  
1
4
7
2
5
8
0
3
6
9
2 Press the  
button.  
The LANGUAGE menu appears.  
3
AV  
MENU  
OK  
P
TV  
P
3 Press the ë buttons to choose ENG-  
LISH.  
English is set for the on-screen display description.  
RM-C51  
TV  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
4 Press the  
button to start the AUTO  
PROGRAM function.  
3
Note:  
When you TV can detect the TV channel name from  
the TV channel broadcast signal, it automatically  
registers the TV channel name (ID) to the Pro-  
gramme number (PR) in which the TV channel has  
been registered.  
The AUTO PROGRAM menu appears and received TV  
channels are automatically registered in the Programme  
numbers (PR).  
If a TV channel you want to view is not set to a Pro-  
gramme number (PR), manually set it using the  
MANUAL function. For details, see “EDIT/MANUAL”  
on page 26.  
The TV channel is not registered in Programme  
number PR 0 (AV). When you want to register a TV  
channel to PR 0 (AV), manually set it using the MAN-  
UAL function. For details, see “EDIT/MANUAL” on  
page 26.  
To cancel the AUTO PROGRAM function:  
Press the  
button.  
4
5 After the TV channels have been regis-  
tered in the Programme numbers (PR),  
the EDIT menu appears.  
You can proceed to edit the Programme numbers (PR)  
using the EDIT/MANUAL function. For details, see “ED-  
IT/MANUAL” on page 26.  
When not using the EDIT/MANUAL function:  
If you do not need to use the EDIT/MANUAL function,  
go to the next step.  
6 Press the  
button to display the T-V  
3
LINK menu.  
7 Operate the T-V LINK menu according  
to the type of a VCR connected to the  
EXT-2 terminal.  
When a T-V LINK compatible VCR is not con-  
nected:  
Press the  
The T-V LINK menu disappears.  
button to exit the T-V LINK menu.  
4
When a T-V LINK compatible VCR is connected:  
Follow the operating procedure “Downloading the data  
to VCR” on page 30 to transmit the Programme number  
(PR) data.  
8 Now, the initial settings are complete,  
and you can watch the TV.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
709#/,1.#)81&7,216  
When a T-V LINK compatible VCR is connected to the EXT-  
2 Terminal on the TV, it is easier to set up the VCR and to  
Note:  
view videos. T-V LINK uses the following features:  
Operation via the TV is not possible.  
Generally, the VCR cannot record a TV channel that can-  
not be received properly by the VCR’s tuner, even though  
you can view that TV channel on the TV. However, some  
VCRs can record a TV channel by using the TV’s output  
if that channel can be viewed on the TV, even though the  
TV channel cannot be received properly by the VCR’s  
tuner. For details, refer to your VCR instruction manual.  
To use T-V LINK functions:  
A T-V LINK compatible VCR is necessary.  
The VCR must be connected to the EXT-2 terminal on the TV  
by a fully wired SCART cable.  
Note:  
A “T-V LINK compatible VCR” means a JVC VCR with the  
T-V LINK logo or a VCR with one of the following logos.  
However, these VCRs may support some or all of the fea-  
tures described below. For details, refer to your VCR in-  
struction manual.  
79#$XWR#3RZHU#2Q29&5#  
,PDJH#9LHZ  
When the VCR starts playing, the TV automatically turns on  
and the images from EXT-2 terminal are displayed on the  
screen.  
When the VCR menu is operated, the TV automatically turns  
on and the images from EXT-2 terminal are displayed on the  
screen.  
“Q-LINK” (a trademark of Panasonic Corporation)  
“Data Logic” (a trademark of Metz Corporation)  
“Easy Link” (a trademark of Phillips Corporation)  
“Megalogic” (a trademark of Grundig Corporation)  
“SMARTLINK” (a trademark of Sony Corporation)  
3UH0VHW#'RZQORDG  
Note:  
This function does not operate if your TV’s main power is  
turned off. Set your TV’s main power to on (standby  
mode).  
Download the registered data on the TV channels from the TV  
to the VCR.  
The Preset Download function automatically begins when the  
initial setting is complete or whenever the AUTO PROGRAM  
or EDIT/MANUAL operations are performed.  
Note:  
This function can be operated via VCR operation.  
When “FEATURE NOT AVAILABLE” is displayed:  
If “FEATURE NOT AVAILABLE” is displayed, the download  
was not performed correctly. Before trying to download again,  
ensure the following:  
The VCR power is turned on.  
The VCR is T-V LINK compatible.  
The VCR is connected to the EXT-2 terminal.  
The SCART cable is fully wired.  
'LUHFW#5HF  
“What You See Is What You Record”  
You can record to VCR the images that you are currently  
viewing on TV by a simple operation.  
For details, read the manual for your VCR.  
Operate via the VCR. “VCR IS RECORDING” is displayed.  
In the following conditions, the VCR will stop recording if  
the TV is turned off, if the TV channel or input is switched,  
or if the menu is displayed on the TV:  
When recording images from an external device connected  
to the TV.  
When recording a TV channel after it has been unscrambled  
on a decoder.  
When recording a TV channel by using the TV’s output be-  
cause that TV channel cannot be properly received on the  
VCR’s tuner.  
:
Download from Www.Somanuals.com. All Manuals Search And Download.  
%$6,&#23(5$7,21  
7XUQ#WKH#0DLQ#SRZHU#RQ  
Press the Main power button on the TV.  
The Power lamp lights red and your TV is in the standby mode.  
Note:  
If the Power lamp lights green, the TV is already on.  
To turn the Main power off:  
Press the Main power button again.  
The Power lamp goes off.  
Note:  
To save energy, turn the main power off if you are not us-  
ing the TV for a long period of time.  
Main power button  
Power lamp  
7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH  
Press the  
button, the  
buttons.  
(Standby) button, the  
=
4
buttons or the Number  
ë
The Power lamp lights red to green and your TV will be turned on.  
1
4
7
2
5
8
0
3
6
9
To turn the TV off:  
Number  
buttons  
Press the  
(standby) button again.  
=
The Power lamp changes from green to red and the TV enters  
standby mode.  
AV  
&KRRVH#D#79#FKDQQHO  
Choose a Programme number (PR) in which the desired Pro-  
gramme TV channel has been set.  
MENU  
OK  
P
TV  
Use the ë buttons:  
Press the ë buttons to choose the desired Pro-  
gramme number (PR).  
Use the Number buttons:  
Enter the desired Programme number (PR) with the  
Number buttons.  
P
Example  
• PR12  
press ~ and Ÿ .  
• PR6 press ¤ .  
Use the PR LIST:  
1 Press the 9 (Information) button to  
RM-C51  
display the PR LIST.  
TV  
;
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Use the ë buttons:  
Press the ë buttons to choose an EXT terminal  
2 Press the ì and ë buttons to choose a  
Programme number (PR). Then press the  
button.  
3
Use the PR LIST:  
1 Press the  
(Information) button to  
9
Note:  
display the PR LIST.  
For Programme numbers (PR) with the CHILD  
LOCK function set, the (CHILD LOCK) mark is  
displayed next to the Programme number (PR) in  
the PR LIST  
ì
ë
2 Press the  
and  
buttons to choose an  
@
EXT terminal. Then press the  
.
button  
3
You cannot use the ë buttons to choose a Pro-  
gramme number (PR) with the CHILD LOCK fun-  
tion set.  
Note:  
The EXT terminals are registered after the Pro-  
gramme number PR 99.  
Even if you try to choose a Programme number  
You can choose a video input signal from the S-VID-  
EO signal (Y/C signal) and regular video signal  
(composite signal). For details, see “K(S-VIDEO  
input)” on page 21.  
(PR) with the CHILD LOCK function set, the  
@
(CHILD LOCK) mark will appear, and you cannot  
watch the TV channel. To watch the TV channel,  
see “CHILD LOCK” on page 23.  
If you do not have a clear picture or no colour ap-  
pears, change the colour system manually. See  
“COLOUR SYSTEM” on page 18.  
If the picture is tilted, correct it. See “PICTURE  
TILT” on page 19.  
When choosing an EXT terminal with no input signal,  
the EXT terminal number becomes fixed on the screen.  
$GMXVW#WKH#YROXPH  
This TV set has a function which can automatically  
change over the input according to a special signal  
output from an external device.(The EXT-4 terminal  
does not support it.)  
ì
Press the  
ume.  
buttons to adjust the vol-  
The Volume indicator appears and the volume changes as  
you press the C buttons.  
To return to a TV channel:  
ë
buttons or the Number but-  
Press the 4 button, the  
tons.  
:DWFK#LPDJHV#IURP#H[WHUQDO#  
To use the Programme number PR 0 (AV):  
When the TV and VCR are connected only by the Aerial  
cable, choosing the Programme number PR 0 (AV) al-  
lows you to view images from the VCR. Set the VCR RF  
channel to the Programme number PR 0 (AV) manually.  
For details, see “EDIT/MANUAL” on page 26.  
GHYLFHV  
Choose an EXT terminal to which the desired external device  
has been connected.  
Use the  
button:  
A
Pressing the  
button changes the choice as follows:  
A
Press the  
button to choose an EXT terminal.  
A
Pressing the  
button changes the choice as follows:  
A
TV mode  
PR 0  
EXT modes  
EXT-1  
EXT-2  
EXT-3  
TV mode  
EXT modes  
Programme  
numbers  
Programme  
numbers  
PR 1 – PR 99  
PR 1 – PR 99  
EXT-1  
EXT-4  
EXT-2  
EXT-3  
EXT-4  
Note:  
The VCR RF channel is sent as the RF signal from  
the VCR.  
Also refer to your VCR instruction manual.  
<
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
2SHUDWLQJ#ZLWK#WKH#EXWWRQV#RQ#WKH#79  
1 Press the P B buttons to turn the  
TV on from standby mode.  
2
Press the P  
B
buttons to choose a  
Programme number (PR) or an EXT ter-  
minal.  
(Behind the front cover)  
3 Press the D (Volume) button and the  
C buttons to adjust the volume.  
1 Press the D (Volume) button.  
The volume level indicator appears.  
2 Press the C buttons while the volume lev-  
el indicator is displayed.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5(027(#&21752/#%877216#$1'#)81&7,216  
1 0XWLQJ#%XWWRQ  
You can turn the sound off instantly.  
Press the  
sound. Pressing the  
restores the previous Volume level.  
(Muting) button to turn off the  
>
(Muting) button again  
>
1
4
7
2
5
8
0
3
6
9
2 1XPEHU#%XWWRQV  
You can choose a Programme number (PR) by  
entering the Programme number.  
AV  
Example:  
• PR12  
press ~ and Ÿ .  
• PR6  
press ¤ .  
MENU  
OK  
P
You can also press the  
EXT terminal.  
button repeatedly to choose an  
A
TV  
3 =220#%XWWRQ  
You can change the screen size according to the picture as-  
pect ratio. Choose the optimum one from the following ZOOM  
modes.  
P
AUTO:  
For any picture format except Normal Picture (4:3 Aspect Ra-  
tio), the picture will be automatically displayed in the optimum  
screen size.  
For Normal Picture (4:3 Aspect Ratio), the picture is displayed  
in accordance with the ZOOM mode set in the 4:3 AUTO AS-  
PECT menu. For details, see “4:3 AUTO ASPECT” on  
page 18.  
Note:  
AUTO may not function properly with poor signal quality.  
In this case, choose an optimum ZOOM mode manually.  
This TV supports WSS (wide-screen signals). When  
broadcasts with WSS are received with the ZOOM mode  
set at AUTO, the most suitable ZOOM mode is automati-  
cally chosen according to the WSS received.  
RM-C51  
With the ZOOM mode set to AUTO, if the special signal  
from an external device such as a VCR or DVD etc. is re-  
ceived the ZOOM mode automatically changes to 16:9  
ZOOM. (Except if the external source is connected to  
EXT-4.)  
TV  
How to open the cover  
REGULAR:  
Use to view a normal picture (4:3 aspect ratio) in its original  
shape.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL BUTTONS AND FUNCTIONS  
ë
PANORAMIC:  
This mode stretches the left and right sides of a normal pic-  
ture (4:3 Aspect Ratio) to fill the screen, without making the  
picture appear unnatural.  
2 Press the  
buttons to choose a ZOOM  
button.  
mode. Then press the  
3
The picture expands and the chosen ZOOM mode is dis-  
played in about 5 seconds.  
Note:  
You can pre-set a ZOOM mode for the normal pic-  
ture. See “4:3 AUTO ASPECT” on page 18.  
Note:  
$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#SLF0  
The top and bottom of the picture are slightly cut off.  
WXUH  
If subtitles or the top (or bottom) of the picture are cut off, ad-  
just the visible area of the picture manually.  
14:9 ZOOM:  
This mode zooms up the Wide Picture (14:9 Aspect Ratio) to  
the upper and lower limits of the screen.  
1 Press the  
button.  
5
The ZOOM menu appears.  
2 Press the  
button to display the ZOOM  
3
mode indication.  
Indicator is displayed.  
16:9 ZOOM:  
This mode zooms up the Wide Picture (16:9 Aspect Ratio) to  
the full screen.  
ë
3 While it is displayed, press the  
buttons  
to adjust the visible area vertically.  
16:9 ZOOM SUBTITLE:  
This mode zooms up the Wide Picture (16:9 Aspect Ratio)  
with subtitles to the full screen.  
Note:  
You cannot adjust the visible area in REGULAR or  
FULL mode.  
4 +<3(5#6281'#%XWWRQ  
You can enjoy sounds with a wider ambience.  
Press the  
the HYPER SOUND function on or off.  
(HYPER SOUND) button to turn  
ò
FULL:  
This mode uniformly stretches the left and right sides of a nor-  
mal picture (4:3 aspect ratio) to fill the wide TV screen.  
Note:  
For 16:9 aspect ratio pictures that have been squeezed  
into a normal picture (4:3 aspect ratio), use the FULL  
mode to restore the picrure to its original shape.  
Note:  
The HYPER SOUND function does not work properly with  
&KRRVH#WKH#=220#PRGH  
1 Press the 5 button to display the ZOOM  
mono sound.  
The HYPER SOUND lamp lights while the HYPER SOUND  
function is in use.  
menu.  
The HYPER SOUND function can be also turned on or off  
by using the SOUND SETTING menu. For details, see  
“HYPER SOUND” on page 20.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL BUTTONS AND FUNCTIONS  
5 #,QIRUPDWLRQ#%XWWRQ  
You can display the PR LIST or the Current Time on the  
screen.  
8 6WDQGE\#%XWWRQ  
Press the  
on or off.  
(Standby) button to turn the TV  
=
Press the  
Pressing the  
play as follows:  
(Information) button.  
(Information) button changes the dis-  
9
9
When the TV is turned on, the power lamp changes from red  
to green.  
9 &RORXU#%XWWRQV  
The colour buttons are used for the teletext operations or the  
menu operations. For details, see “~ Teletext Control But-  
tons and VCR/(/DVD Switch” on page 14 or “MENU OPER-  
ATION” on page 16.  
0 2.#%XWWRQ  
The  
button is used to operate menus. For details, see  
3
“MENU OPERATION” on page 16.  
ë
-
#%XWWRQV  
You can choose a Programme number (PR) or an EXT termi-  
nal.  
Current time  
No indication  
ë
Press the  
buttons to choose an Pro-  
gramme number (PR) or an EXT terminal.  
The  
buttons are also used to operate menus.  
ë
Note:  
For details, see “MENU OPERATION” on page 16.  
You can choose Programme numbers (PR) or EXT termi-  
nals with the PR LIST. For details, see “Use the PR LIST:”  
on page 8.  
= 9&52'9'# &RQWURO# %XWWRQV# DQG  
9&52(2'9'#6ZLWFK  
These buttons can be used to operate a JVC brand VCR or  
DVD player. Pressing a button which has the same appear-  
ance as a button on the original remote control of the VCR or  
DVD player makes the function work in the same way as the  
button on the original remote control.  
This TV uses teletext data to set the current time. If the TV  
has not received a TV channel that has teletext pro-  
grammes since it was turned on, the time display is blank.  
To view the current time, choose a TV channel that has  
teletext programmes. The time will still be displayed as  
long as you do not turn off the TV, even if you choose oth-  
er TV channels.  
When watching videos, an incorrect current time is some-  
1 Set the VCR/(/DVD Switch to the VCR or  
times displayed.  
DVD position.  
VCR:  
The  
(Information) button is also used to operate  
9
menus. For details, see “MENU OPERATION” on  
When you are operating the VCR, set the switch to the  
VCR position.  
page 16.  
DVD:  
6 79#%XWWRQ  
You can return to a TV channel instantly.  
When you are operating the DVD player, set the switch  
to the DVD position.  
Press the  
button.  
4
(Text):  
(
The TV returns to the TV mode and a TV channel appears.  
When you are viewing Teletext programmes, set the  
switch to the (Text) position.  
(
Note:  
The  
button is also used to operate menus. For details,  
see “MENU OPERATION” on page 16.  
4
2 Press the VCR/DVD Control Button to con-  
trol your VCR or DVD player.  
7 ì#%XWWRQV  
You can adjust the volume.  
Note:  
If your device is not made by JVC, these buttons  
cannot be used.  
Even if your device is made by JVC one or more of  
these buttons may not work, dependent on the de-  
vice you are using.  
Press the ì buttons to adjust the sound.  
Note:  
You can use the  
buttons to choose a TV channel  
B
The ì buttons are also used to operate menus. For de-  
tails, see “MENU OPERATION” on page 16.  
the VCR will receive or choose the chapter the DVD  
player plays back.  
Some models of DVD player use the  
buttons for  
B
operation of both the Fast forward/backward func-  
tions and for choosing the chapter. In this case, the  
1/¡ buttons do not work.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL BUTTONS AND FUNCTIONS  
~ #7HOHWH[W#&RQWURO#%XWWRQV#DQG#9&52(2'9'#6ZLWFK  
3 Press and hold down  
button.  
ö
%DVLF#RSHUDWLRQ  
You can view two types of teletext broadcasts on the TV:  
FLOF (Fastext) and WST (World Standard Text).  
The four page numbers blink white to indicate that they  
are stored in memory.  
1 Choose a TV channel with a teletext broad-  
cast.  
To call up a stored page:  
1 Press the ù button to engage the List  
2 Set the VCR/(/DVD switch to the  
(Text)  
mode.  
(
position.  
2 Press a colour button to which a page has  
been assigned.  
3 Press : (Text) button to display the  
To exit the List mode:  
Press the ù button again.  
teletext.  
Pressing : (Text) button changes the mode as fol-  
lows:  
+ROG  
You can hold a teletext page on the screen for as long as you  
want, even while several other teletext pages are being re-  
ceived.  
Press the û button.  
TV mode  
Text mode  
Hold indication  
4 Choose a teletext page by pressing the  
ë
buttons, Number buttons or Colour  
buttons.  
To cancel the Hold function:  
To return to the TV mode:  
Press û button again.  
Press the  
button or  
(Text) button.  
:
4
6XE0SDJH  
Note:  
Some teletext pages include sub-pages that are automatically  
displayed.  
If you have trouble receiving teletext broadcasts,  
consult your local dealer or the teletext station,  
You can hold any sub-page, or view it at any time.  
In the Text mode, the ZOOM mode is fixed to the  
FULL mode.  
1 Press the õ button to operate the Sub-  
No menu operations are possible when viewing a  
teletext programme.  
page function.  
2 Press the Number buttons to enter a sub-  
page number.  
8VLQJ#WKH#/LVW#0RGH  
You can store the numbers of your favourite teletext pages in  
memory and call them up quickly using the colour buttons.  
Example:  
• 3rd sub-page press ) , ) , ) and 3 .  
To store the page numbers:  
To cancel the Sub-page function:  
Press the õ button again.  
1 Press  
button to engage the List mode.  
ù
The stored page numbers are displayed at the bottom of  
the screen.  
Note:  
You can also choose a sub-page by pressing the  
red or green button.  
2 Press a Colour button to choose a posi-  
tion. Then press the Number buttons to en-  
ter the page number.  
1
4
7
2
5
8
0
3
6
9
AV  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL BUTTONS AND FUNCTIONS  
5HYHDO  
Some teletext pages include hidden text (such as answers to  
a quiz).  
You can display the hidden text.  
Each time you press the ø button, text is hid-  
den or revealed.  
6L]H  
You can double the height of the teletext display.  
Press the ÷ button.  
,QGH[  
You can return to the index page instantly.  
Press ú button.  
FLOF (Fastext)/WST (World Standard Text):  
Returns to page 100 or a previously specified page.  
List mode:  
Returns to the page number displayed in the lower left area of  
the screen.  
&DQFHO  
You can search for a teletext page while watching TV.  
1 Press the Number button to enter a page  
number, or press a Colour button.  
The TV searches for a teletext page.  
2 Press ü button.  
The TV programme appears. When the TV finds the  
teletext page, its page number appears in the upper left  
of the screen.  
3 Press ü button to return to a teletext  
page when the page number is on the  
screen.  
Note:  
The TV mode cannot be resumed by pressing the  
button. The TV programmes are temporarily dis-  
played instead of the teletext programme. To return  
ü
to TV mode press the  
button.  
4
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0(18#23(5$7,21  
This TV has a number of functions you can operate using  
menus. To fully utilize all your TV’s functions, you need to un-  
derstand the basic menu operating techniques fully.  
1 Press the  
button to display the  
MENU (main menu).  
3
The MENU (main menu) appears. In it, the titles of the  
menus are displayed.  
2 Press the  
buttons to choose a  
menu title, and press the 3 button.  
ë
The menu appears.  
3 Operate the menus according to the  
operation description of each function.  
Note:  
For details, refer to the operation descriptions of  
each function described for each menu which fol-  
lows this “MENU OPERATION”.  
The display appearing at the bottom of a menu indi-  
cates a button on the remote controller you can use  
when you operate a chosen function.  
4 Press  
button to complete the set-  
3
ting.  
The menu disappears.  
To return to the previous menu:  
Press  
(information) button.  
9
To exit a menu instantly:  
Press the 4 button.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3,&785(#6(77,1*  
Note:  
You can change the HUE setting (picture hue) only  
when the colour system is NTSC 3.58 or NTSC 4.43.  
To return to the default settings in each TINT  
mode:  
Press the blue button.  
Returns the picture settings in the currently chosen TINT  
mode to the default settings, and stores them in the TINT  
mode again.  
To display the PICTURE SETTING menu:  
1 Press the  
button to display MENU  
3
(main menu).  
2 Press the ë button to choose PICTURE  
SETTING, and press the button.  
3 Press the  
tings.  
button to complete the set-  
3
3
The menu disappears.  
7,17  
(&2#02'(  
When you set the ECO MODE function to ON, the screen  
contrast is automatically adjusted to a setting suitable for the  
brightness of your room. This reduces eye strain for you and  
the power consumption of the TV.  
You can select one of three TINT modes (three kinds of pic-  
ture settings) to adjust the picture settings automatically.  
1 Press the ë buttons to choose TINT.  
2 Press ì buttons to choose a mode.  
1 Press ë buttons to choose ECO MODE.  
2 Press ì buttons to choose ON.  
COOL:  
A cool white colour base with a boost in the colour and  
contrast levels that creates a more vivid picture.  
To cancel the ECO MODE function:  
Press ì buttons to choose OFF.  
WARM:  
A warm orange/red colour base that creates the appro-  
priate colour and contrast levels for watching films.  
3 Press the  
ting.  
button to complete the set-  
3
NORMAL:  
The menu disappears.  
A normal white colour base with normal colour and con-  
trast levels.  
Note:  
If you set the ECO MODE function to ON, the ECO lamp  
lights.  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
3LFWXUH#$GMXVWPHQW  
You can change the picture settings of each TINT mode as  
you like.  
The picture settings changed are stored in the TINT mode.  
1 Press the ë buttons to choose an item.  
2 Press the ì buttons to change the set-  
ting.  
ï
Item  
î
Lower  
Higher  
CONTRAST  
(picture contrast)  
Darker  
Softer  
Brighter  
Sharper  
Deeper  
BRIGHT  
(picture brightness)  
SHARP  
(picture sharpness)  
Lighter  
Reddish  
COLOUR  
(picture colour)  
Greenish  
HUE  
(picture hue)  
4:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3,&785(#)($785(6  
2 Press the ì buttons to choose the ap-  
propriate colour system.  
PAL:  
PAL system  
NTSC 3.58:  
NTSC 3.58 MHz system  
NTSC 4.43  
NTSC 4.43 MHz system  
AUTO:  
To display the PICTURE FEATURES menu:  
This function detects a colour system from the input sig-  
nal. Only when you are viewing a picture from Pro-  
gramme number PR 0 (AV), or EXT terminal, you can  
choose using the AUTO function.  
1 Press the  
button to display MENU  
3
(main menu).  
2 Press the ë button to choose PICTURE  
FEATURES, and press the button.  
3
3 Press the  
ting.  
button to complete the set-  
3
$872#915  
The AUTO VNR function optimally reduces noise of the TV  
automatically according to the noise of the current picture.  
The function also adjusts the optimum Sharpness (SHARP).  
The menu disappears.  
Note:  
The AUTO function may not function properly if you  
have poor signal quality. If the picture is abnormal in  
the AUTO function, choose another colour system  
manually.  
1 Press the ë buttons to choose AUTO  
VNR.  
When in the Programme numbers PR 0 (AV) to PR  
99, you cannot choose NTSC 3.58 or NTSC 4.43.  
2 Press the ì buttons to choose AUTO.  
MIN:  
The AUTO VNR function is cancelled. When you set the  
mode to AUTO but feel that the sharpness of the original  
picture has not be reproduced fully, change the mode to  
MIN. However, a noise remaining in the original picture  
may be emphasized.  
7=6#$872#$63(&7  
You can choose one of three ZOOM modes, REGULAR,  
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the nor-  
mal picture (4:3 aspect ratio).  
MAX:  
This mode always maximizes the noise reduction effect  
irrespective of state of the picture. When you set the  
mode to AUTO but feel that the noise is remarkable,  
change the mode to MAX. However, this may reduce the  
sharpness of the picture.  
ë
1 Press the  
buttons to choose 4:3 AUTO  
button.  
ASPECT. Then press the  
The Sub-menu of the 4:3 AUTO ASPECT function ap-  
pears.  
3
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
&2/285#6<67(0  
The colour system is chosen automatically. However, if the  
picture is not clear or no colour appears, choose the colour  
system manually.  
ë
2 Press the  
mode.  
buttons to choose a ZOOM  
ë
1 Press the  
buttons to choose COLOUR  
button.  
3 Press the  
tings.  
button to complete the set-  
3
SYSTEM. Then press the  
The Sub-menu of the COLOUR SYSTEM function ap-  
pears.  
3
The menu disappears.  
4;  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE FEATURES  
3,&785(#7,/7  
There are cases where the Earth’s magnetic force may make  
the picture tilt. If this happens, you can correct the picture tilt.  
ë
1 Press the  
buttons to choose PICTURE  
button.  
TILT. Then press the  
The Sub-menu of the PICTURE TILT function appears.  
3
ë
2 Press the  
comes level.  
buttons until the picture be-  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
4<  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6281'#6(77,1*  
63($.(5  
You can turn off the sound from the TV speakers; but you  
should only do this if an audio system is connected to the TV  
as a substitute for the TV speakers. When you are using this  
function, see “Setting the SPEAKER function” on page 31.  
When a sound is not issued from the TV speaker:  
If the SPEAKER function is set to OFF, the TV speaker does  
not issue sound. Press the ë buttons to choose the  
SPEAKER. Then press ì buttons to choose ON.  
To display the SOUND SETTING menu:  
1 Press the  
button to display MENU  
3
(main menu).  
%%(  
2 Press the  
button to choose SOUND  
ë
You can use the BBE function to enjoy easy-to-listen sound  
that is faithful to the original sound recorded.  
SETTING. Then press the  
button.  
3
1 Press ë buttons to choose BBE.  
2 Press ì buttons to choose ON.  
67(5(2#2#,‡,,  
When you are viewing a bilingual broadcast programme, you  
can choose the sound from Bilingual I (Sub I) or Bilingual II  
(Sub II). When the stereo broadcasting is received poorly, you  
can change from stereo to mono sound so that you can hear  
the broadcast more clearly and easily.  
To cancel the BBE function:  
Press ì buttons to choose OFF.  
3 Press the  
ting.  
button to complete the set-  
3
1
Press  
buttons to choose STEREO / I • II.  
buttons to choose a sound  
ë
ì
The menu disappears.  
2 Press  
mode.  
Licensed by BBE Sound, Inc. BBE is a registered trade-  
mark of BBE Sound, Inc.  
E :Stereo sound  
ý
H :mono sound  
ýF :Bilingual I (sub I)  
+<3(5#6281'  
You can enjoy sounds with a wider ambience.  
ý
ýG :Bilingual II (sub II)  
3 Press the  
ting.  
button to complete the set-  
3
1 Press ë buttons to choose HYPER  
SOUND.  
The menu disappears.  
2 Press ì buttons to choose ON.  
Note:  
To cancel the HYPER SOUND function:  
Press the ì buttons to choose OFF.  
The sound mode you can choose differs depending  
on the TV programme.  
This function does not work in the EXT modes. And  
this function does not appear in the SOUND SET-  
TING menu.  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears  
Note:  
6RXQG#$GMXVWPHQW  
You can adjust the sound to your liking.  
The HYPER SOUND function does not work properly  
with mono sound.  
The HYPER SOUND lamp lights while the HYPER  
1 Press the ë buttons to choose an item.  
2 Press the ì buttons to adjust it.  
SOUND function is in use.  
You can turn on or off the HYPER SOUND function  
with a single press. For details, see “4 HYPER  
SOUND Button” on page 12.  
ï
Item  
BASS  
î
Weaker  
Weaker  
Left  
Stronger  
Stronger  
Right  
TREBLE  
BALANCE  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(;7#6(77,1*  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
Note:  
The EXT-1 terminal does not support S-VIDEO signal  
(Y/C signal) and you cannot set K (S-VIDEO input)  
in the EXT-1 terminal.  
Setting K (S-VIDEO input) changes the head  
character from “E” to “S”. For example, “E2” is  
changed to “S2”.  
To display EXT SETTING menu:  
Even an device which enables the S-VIDEO signal (Y/  
C signal) to be output may output a regular video sig-  
nal (composite signal) depending on the device set-  
ting. If a picture cannot appear because K (S-  
VIDEO input) setting has been made, read the device  
Instruction Manual carefully again to check for the de-  
vice settings.  
1 Press the  
button to display MENU  
3
(main menu).  
2 Press the ë button to choose EXT SET-  
TING. Then press the button.  
3
K+609,'(2#LQSXW,  
When connecting a device (such as S-VHS VCR) which en-  
ables an S-VIDEO signal (Y/C signal) to be output, you can  
enjoy high-quality picture of the S-VIDEO signal (Y/C signal).  
/,67  
You can have a name corresponding to the devices connect-  
ed for each EXT terminal. Giving a name to an EXT terminal  
makes the EXT terminal number appear on the screen, to-  
gether with the name.  
Preparation:  
At first, read the Device Instruction Manual and “ADDITION-  
AL PREPARATION” on page 32 to connect the device to the  
TV properly. Second, follow the Device Instruction Manual  
to set the device so that a S-VIDEO signal (Y/C signal) can  
be output to the TV.  
1 Press the ë buttons or ì buttons to  
choose an EXT terminal.  
Do not set K(S-VIDEO input) to the EXT terminal con-  
nected to a device which cannot output a S-VIDEO (Y/C sig-  
nal). If it is set wrongly, a picture cannot appear.  
EXT-1  
P
1 Press the  
buttons or  
buttons to  
ë
ì
EXT-3  
choose an EXT terminal.  
EXT-2  
EXT-4  
P
EXT-1  
TV  
P
EXT-3  
2 Press the blue button to display the name  
list (LIST).  
EXT-2  
EXT-4  
P
TV  
2 Press the yellow button and set the K  
(S-VIDEO input).  
A K (S-VIDEO input) mark is displayed. You can view  
an S-VIDEO signal (Y/C signal) instead of the regular  
video signal (composite signal).  
To cancel the K (S-VIDEO input) setting:  
Press the yellow button and turn off K (S-VIDEO in-  
put) mark.  
The regular video signal (composite signal) pictures are  
resumed.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXT SETTING  
3 Press the ë buttons to choose a name.  
Then press the  
button.  
3
The LIST disappears and the name is assigned to the  
EXT terminal.  
To erase a name assigned to the EXT terminal:  
Choose a blank space.  
4 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
Note:  
You cannot assign an EXT terminal name not found  
in the name list (LIST).  
'8%%,1*  
You can choose a signal source to be output from an EXT-2  
terminal.  
You can choose any one of the output signal of the device  
connected to the EXT terminal and the picture and sound  
from a TV channel you are currently viewing to output it to the  
EXT-2 terminal.  
1 Press the ì buttons to choose the EXT-2  
terminal.  
2 Press the ë buttons to choose an EXT  
terminal or TV.  
The arrow in the menu represents a signal flow. The left  
side of the arrow denotes a signal source output from the  
EXT-2 terminal.  
EXT-1/EXT-3/EXT-4:  
The output signal of the device connected to an EXT ter-  
minal passes through the TV and is output from the EXT-  
2 terminal.  
TV:  
The picture and sound of the TV channel you are cur-  
rently viewing are output from the EXT-2 terminal.  
3 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
Note:  
During dubbing, you cannot turn off the TV. Turning  
off the TV also turns off the output from the EXT-2 ter-  
minal.  
When you choose an EXT terminal as an output, you  
can view a TV programme or a picture from the other  
EXT terminal while dubbing the picture from a de-  
vice connected to the EXT terminal onto a VCR con-  
nected to the EXT-2 terminal.  
The RGB signals from the TV games cannot be out-  
put.Teletext programmes cannot be output.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
)($785(6  
%/8(#%$&.  
You can set the TV to automatically change to a blue screen  
and mute the sound if the signal is weak or absent, or when  
there is no input from an external device.  
1 Press the  
BACK.  
buttons to choose BLUE  
ë
2 Press theì buttons to choose ON.  
To display the FEATURES menu:  
1 Press the  
button to display MENU  
To cancel the BLUE BACK function:  
Press theì buttons to choose OFF.  
3
(main menu).  
2 Press theë button to choose FEATURES.  
3 Press the  
ting.  
button to complete the set-  
3
Then press the  
button.  
3
The menu disappears.  
6/((3#7,0(5  
You can set the TV to automatically turn off after a specified  
period of time.  
&+,/'#/2&.  
When there is a TV channel you wish your children not to  
watch, you can use the CHILD LOCK function to lock out the  
TV channel. Even when a child chooses a Programme num-  
ber (PR) in which a locked TV channel has been registered,  
1 Press the  
buttons to choose SLEEP  
ë
TIMER. Then press the  
A Sub-menu of the SLEEP TIMER function appears.  
button.  
3
the screen will change to blue and displays (CHILD LOCK)  
@
so the TV channel cannot be viewed. Unless you enter a pre-  
set ID number by a special operation, the lock cannot be re-  
leased and the child cannot view the TV channel programs.  
7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ  
1 Press the ë buttons to choose CHILD  
LOCK. Then press theA button.  
“SET ID NO.” (ID number setting screen) appears.  
2 Press the  
time.  
buttons to set the period of  
ì
You can set the period of time a maximum of 120 min-  
utes (2 hours) in 10 minute increments.  
To cancel the SLEEP TIMER function:  
Press the ï button to set a period of time to “OFF.”  
2 Set the ID number to your liking.  
3 Press the  
tings.  
button to complete the set-  
3
1 Press theë buttons to choose a number.  
2 Press theì buttons to move the cursor.  
The menu disappears.  
Note:  
3 Press the  
button.  
3
The SLEEP TIMER lamp lights while the SLEEP TIM-  
ER function is operating.  
The Sub-menu of CHILD LOCK appears.  
One minute before the SLEEP TIMER function turns  
off the TV, “GOOD NIGHT!” appears.  
The SLEEP TIMER function cannot be used to turn  
off the TV’s main power.  
When the SLEEP TIMER function is on, you can dis-  
play the Sub-menu of the SLEEP TIMER function  
again to confirm and/or change the remaining peri-  
od of time of the SLEEP TIMER function. Press the  
button to exit the menu after confirming and / or  
changing the remaining time.  
3
4 Press theë buttons to choose a TV  
channel.  
Every time you press the ë buttons, the Programme  
number (PR) changes, and the picture of the TV channel  
registered in the Programme number (PR) is displayed  
on the screen.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
5 Press the blue button and set the CHILD  
LOCK function.  
'(&2'(5#+(;705,  
Only when connecting a Decoder with a T-V LINK compatible  
VCR connected to the EXT-2 terminal, you can use this func-  
tion. To operate this function, see “Using the DECODER  
(EXT-2) function” on page 30.  
(CHILD LOCK) appears and the TV channel is locked.  
@
To reset the CHILD LOCK function:  
Press the blue button again.  
(CHILD LOCK) disappears.  
Caution:  
@
If you have not connected a Decoder with a T-V LINK com-  
patible VCR connected to the EXT-2 terminal, setting this  
function to “ON” by mistake causes the picture/sound of a  
TV channel you are currently viewing not to be issued.  
6 Press the  
ting.  
button to complete the set-  
3
The menu disappears.  
Note:  
To disable easy resetting of the CHILD LOCK func-  
tion, the menu disappears by choosing the CHILD  
LOCK function and pressing the  
ordinary menu operation.  
button as in the  
3
7R#YLHZ#D#ORFNHG#79#FKDQQHO  
1 Choose a Programme number (PR) in  
which a TV channel locked with the  
Number buttons or PR LIST.  
The screen changes to blue and the (CHILD LOCK)  
@
appears. You cannot view the TV channel.  
2 Press the  
(Information) button to  
9
display “ID NO.” (ID No. input screen).  
3 Press the Number buttons to enter the ID  
number.  
The lock is temporarily released so you can view the TV  
channel.  
If you have forgotten the ID number:  
Perform step 1 of “To set the CHILD LOCK function”. Af-  
ter confirming the ID number, press the  
the menu.  
button to exit  
4
Note:  
Even if you reset the lock temporarily, it does not  
mean that the CHILD LOCK function set for the TV  
channel is cancelled. The next time anyone at-  
tempts to view the TV channel, it will be locked  
again.  
When you would like to cancel the CHILD LOCK  
function, you must perform the operation “To set the  
CHILD LOCK function” again.  
To disable easy choosing of a Programme number  
(PR) in which a locked TV channel has been regis-  
tered, the Programme number (PR) has been set  
that it cannot be chosen by the  
operation buttons at the TV.  
buttons or the  
ë
To disable easy resetting of the lock, “ID NO.” (ID  
No. input screen) is set so that it cannot appear un-  
less you press the  
(Information) button.  
9
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
,167$//  
To cancel the AUTO PROGRAM function:  
Press the button.  
4
3 After the TV channels have been regis-  
tered in the Programme numbers (PR), the  
EDIT menu appears.  
You can proceed to edit the Programme numbers (PR)  
using the EDIT/MANUAL function. For details, see “ED-  
IT/MANUAL” on page 26.  
To display the INSTALL menu:  
When not using the EDIT/MANUAL function:  
If you do not need to use the EDIT/MANUAL function, go  
to the next step.  
1 Press the  
button to display MENU  
3
(main menu).  
2 Press the  
button to choosetheINSTALL  
ë
4 Press the  
menu.  
button to display the T-V LINK  
3
menu. Then press the  
button.  
3
/$1*8$*(  
You can choose the language you want to use for the on-  
screen display from the language list in a menu.  
1 Press the  
buttons to choose LAN-  
ë
GUAGE. Then press the  
A sub-menu of the LANGUAGE function appears.  
button.  
3
5 Operate the T-V LINK menu according to  
the type of VCR connected to the EXT-2  
terminal.  
When a T-V LINK compatible VCR is not con-  
nected:  
Press the  
button to exit the T-V LINK menu.  
4
The T-V LINK menu disappears, and all the settings are  
completed.  
When a T-V LINK compatible VCR is connected:  
Follow the operating procedure “Downloading the data  
to VCR” on page 30 to transmit the Programme number  
(PR) data to the VCR.  
2 Press the  
guage.  
buttons to choose a lan-  
ë
Note:  
3 Press the  
ting.  
button to complete the set-  
3
When your TV can detect the TV channel name from  
the TV channel broadcast signal, it automatically  
registers the TV channel name (ID) to the Pro-  
gramme number (PR) in which the TV channel has  
been registered.  
The menu disappears.  
If a TV channel you want to view is not set to a Pro-  
gramme number (PR), manually set it using the  
MANUAL function. For details, see “EDIT/MANUAL”  
on page 26.  
$872#352*5$0  
You can automatically register the TV channels which can be  
received well at your residence in the TV’s Programme num-  
bers (PR) by performing the following.  
The TV channel is not registered in Programme  
number PR 0 (AV). When you want to register a TV  
channel to PR 0 (AV) manually set it using the MAN-  
UAL function. For details, see “EDIT/MANUAL” on  
page 26.  
1 Press the  
buttons to choose AUTO  
ë
PROGRAM.  
2 Press the  
button to start the AUTO  
3
PROGRAM function.  
The AUTO PROGRAM menu appears and received TV  
channels are automatically registered in the Programme  
numbers (PR).  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
2 Follow the operation description of a func-  
tion you want to use and operate the func-  
tion.  
(',720$18$/  
The EDIT/MANUAL functions are divided into two types: ed-  
iting of the current Programme numbers (PR) (EDIT func-  
tions) and manual registration of a TV channel you want to  
view to the Programme number (PR) (MANUAL function).  
The details about these functions are as follows:  
3 Press the  
tings.  
button to complete the set-  
3
The T-V LINK menu appears.  
MOVE:  
This function changes a Programme number (PR) of a TV  
channel.  
ID:  
This function registers a Channel name (ID) to a TV channel.  
INSERT:  
This function adds a new TV channel in the current Pro-  
gramme numbers (PR) list by using the CH/CC number.  
4 Operate the T-V LINK menu according to  
the type of VCR connected to the EXT-2  
terminal.  
DELETE:  
This function deletes a unnecessary TV channel.  
When a T-V LINK compatible VCR is not con-  
nected:  
MANUAL:  
This function manually registers a new TV channel in a Pro-  
gramme number (PR).  
Press the  
button to exit the T-V LINK menu.  
4
The T-V LINK menu disappears and all the settings are  
completed.  
Caution:  
When a T-V LINK compatible VCR is connected:  
Using the MOVE, DELETE or INSERT function rewrites the  
current Programme numbers (PR) list. Resultingly, the Pro-  
gramme number (PR) of some of the TV channels will  
change.  
Follow the operating procedure “Downloading the data  
to VCR” on page 30 to transmit the Programme number  
(PR) data to the VCR.  
Using the MANUAL function for a TV channel for which the  
CHILD LOCK function has been set cancels the CHILD  
LOCK function for the TV channel.  
029(  
1 Press the  
channel.  
ë
buttons to choose a TV  
Using the MANUAL function for a TV channel for which the  
DECODER (EXT-2) function has been set to ON returns the  
setting of the DECODER (EXT-2) function for the TV chan-  
nel to OFF.  
ë
Every time you press the  
buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR) ap-  
pears on the screen.  
When a TV channel has already been registered in PR 99,  
using the INSERT function deletes the TV channel.  
î
2 Press the button to start the MOVE func-  
Note:  
tion.  
For Programme number PR 0, “AV” appears in the Pro-  
gramme numbers (PR) list.  
An EXT terminal number does not appear in the Pro-  
gramme numbers (PR) list.  
The CH/CC number is a number unique to the TV and  
corresponding to the Channel number of a TV channel.  
For the relationship of a Channel number and a CH/CC  
number, see “CH/CC NUMBER” on page 28.  
You cannot use the INSERT function if you do not know a  
Channel number of a TV channel. Use the MANUAL func-  
tion to register a TV channel in the Programme number  
(PR).  
ë
3 Press the  
buttons to choose a new  
Programme number (PR).  
ë
1 Press the  
buttons to choose EDIT/  
button.  
MANUAL. Then press the  
3
To cancel the MOVE function:  
Press the (Information) button.  
9
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
ï
4 Press the button to change the Pro-  
Note:  
gramme number (PR) of a TV channel to a  
new Programme number (PR).  
You can register your unique Channel name (ID) to  
the TV channel. When step 3 is completed, do not  
ì
go to step 4, but press the  
buttons to move the  
buttons to choose a character for  
completing the Channel name (ID). Then press the  
button to register the Channel name (ID) to the TV  
,'  
ë
cursor and the  
ë
1 Press the  
channel.  
buttons to choose a TV  
3
channel.  
ë
Every time you press the  
buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR) ap-  
pears on the screen.  
,16(57  
Preparation:  
A CH/CC number unique to this TV and corresponding to  
the Channel number of a TV channel is required. Find the  
corresponding CH/CC number from a table “CH/CC  
NUMBER” on page 28 based on the Channel number of the  
TV channel.  
2 Press the red button to start the ID func-  
tion.  
ë
1 Press the  
buttons to choose a Pro-  
gramme number (PR) for which you will  
register a new TV channel.  
2 Press the green button and start the IN-  
SERT function.  
ë
3 Press the  
buttons to choose the first  
character of a Channel name (ID) you want  
to attach to the TV channel.  
To cancel the INSERT function:  
Press the  
(Information) button.  
9
ë
3 Press the  
buttons to choose “CC” or  
“CH” according to the CH/CC number of  
the TV channel.  
4 Press the blue button to display the ID LIST  
(channel name list).  
To cancel the INSERT function:  
Press the  
(Information) button.  
9
4 Press the Number button to enter the re-  
maining CH/CC number.  
The TV shifts to registration mode.  
When the registration is completed, the picture of the TV  
channel appears on the screen.  
Note:  
The CH/CC number is a number indicating the  
broadcast frequency to the TV. If the TV cannot de-  
tect the TV channel corresponding to the broadcast  
frequency indicated by the CH/CC number, a pic-  
ture in the no-signal state appears.  
ë
5 Press the  
nel name (ID).  
buttons to choose the Chan-  
To cancel the ID function:  
Press the  
(Information) button.  
9
6 Press the  
button to register a Channel  
3
name (ID) to a TV channel.  
5:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
'(/(7(  
&+2&&#180%(5  
1 Press the ë buttons to choose a TV  
When you want to use the INSERT function on page 27,  
find the CH/CC number corresponding to the Channel  
number of the TV channel from this table.  
channel.  
Every time you press the ë buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR) ap-  
pears on the screen.  
CH  
Channel  
CH  
Channel  
E40  
E41  
E42  
E43  
E44  
E45  
E46  
E47  
E48  
E49  
E50  
E51  
E52  
E53  
E54  
E55  
E56  
E57  
E58  
E59  
E60  
E61  
E62  
E63  
E64  
E65  
E66  
E67  
E68  
E69  
CH 02 / CH 202  
CH 03 / CH 203  
CH 04 / CH 204  
CH 05 / CH 205  
CH 06 / CH 206  
CH 07 / CH 207  
CH 08 / CH 208  
CH 09 / CH 209  
CH 10 / CH 210  
CH 11 / CH 211  
CH 12 / CH 212  
CH 21 / CH 221  
CH 22 / CH 222  
CH 23 / CH 223  
CH 24 / CH 224  
CH 25 / CH 225  
CH 26 / CH 226  
CH 27 / CH 227  
CH 28 / CH 228  
CH 29 / CH 229  
CH 30 / CH 230  
CH 31 / CH 231  
CH 32 / CH 232  
CH 33 / CH 233  
CH 34 / CH 234  
CH 35 / CH 235  
CH 36 / CH 236  
CH 37 / CH 237  
CH 38 / CH 238  
CH 39 / CH 239  
E2, IR A  
CH 40 / CH 240  
CH 41 / CH 241  
CH 42 / CH 242  
CH 43 / CH 243  
CH 44 / CH 244  
CH 45 / CH 245  
CH 46 / CH 246  
CH 47 / CH 247  
CH 48 / CH 248  
CH 49 / CH 249  
CH 50 / CH 250  
CH 51 / CH 251  
CH 52 / CH 252  
CH 53 / CH 253  
CH 54 / CH 254  
CH 55 / CH 255  
CH 56 / CH 256  
CH 57 / CH 257  
CH 58 / CH 258  
CH 59 / CH 259  
CH 60 / CH 260  
CH 61 / CH 261  
CH 62 / CH 262  
CH 63 / CH 263  
CH 64 / CH 264  
CH 65 / CH 265  
CH 66 / CH 266  
CH 67 / CH 267  
CH 68 / CH 268  
CH 69 / CH 269  
E3, IR B, ITALY A  
E4, IR C, ITALY B  
E5, IR D, ITALY D  
2 Press the yellow button to delete the TV  
channel.  
E6, IR E, ITALY E  
E7, IR F, ITALY F  
E8, IR G  
The TV channel is deleted from the Programme num-  
bers (PR) list.  
E9, ITALY G  
E10, IR H, ITALY H  
E11, IR J, ITALY H+1  
E12, ITALY H+2  
E21  
E22  
E23  
E24  
E25  
E26  
E27  
E28  
E29  
E30  
E31  
0$18$/  
1 Press the  
E32  
E33  
ë
buttons to choose a Pro-  
E34  
E35  
gramme number (PR) to which you want to  
register a new TV channel.  
E36  
E37  
E38  
E39  
2 Press the blue button to activate the MAN-  
UAL function.  
CC  
Channel  
S1  
CC  
Channel  
S31  
CC 01 / CC 201  
CC 02 / CC 202  
CC 03 / CC 203  
CC 04 / CC 204  
CC 05 / CC 205  
CC 06 / CC 206  
CC 07 / CC 207  
CC 08 / CC 208  
CC 09 / CC 209  
CC 10 / CC 210  
CC 11 / CC 211  
CC 12 / CC 212  
CC 13 / CC 213  
CC 14 / CC 214  
CC 15 / CC 215  
CC 16 / CC 216  
CC 17 / CC 217  
CC 18 / CC 218  
CC 19 / CC 219  
CC 20 / CC 220  
CC 21 / CC 221  
CC 22 / CC 222  
CC 23 / CC 223  
CC 24 / CC 224  
CC 25 / CC 225  
CC 26 / CC 226  
CC 27 / CC 227  
CC 28 / CC 228  
CC 29 / CC 229  
CC 30 / CC 230  
CC 31 / CC 231  
CC 32 / CC 232  
CC 33 / CC 233  
CC 34 / CC 234  
CC 35 / CC 235  
CC 36 / CC 236  
CC 37 / CC 237  
CC 38 / CC 238  
CC 39 / CC 239  
CC 40 / CC 240  
CC 41 / CC 241  
CC 75 / CC 275  
CC 76 / CC 276  
CC 77 / CC 277  
CC 78 / CC 278  
CC 79 / CC 279  
S2  
S32  
S3  
S33  
S4  
S34  
S5  
S35  
S6  
S36  
S7  
S37  
S8  
S38  
S9  
S39  
S10  
S11  
S12  
S13  
S14  
S15  
S16  
S17  
S18  
S19  
S20  
S21  
S22  
S23  
S24  
S25  
S26  
S27  
S28  
S29  
S30  
S40  
S41  
X
Y
To cancel the MANUAL function:  
Z, ITALY C  
Z+1  
Press the  
(Information) button.  
9
Z+2  
3 Press the green or red button to search for  
a TV channel.  
Scanning stops when the TV finds a TV channel. Then  
the TV channel is displayed.  
4 Press the green or red button repeatedly  
until the TV channel you want appears.  
If the TV channel reception is poor:  
Press the blue or yellow button to fine-tune the TV chan-  
nel.  
5 Press the  
button and register the TV  
3
channel to a Programme number (PR).  
The normal EDIT menu is resumed.  
5;  
Download from Www.Somanuals.com. All Manuals Search And Download.  
'(02  
To display the DEMO menu:  
1 Press the  
button to display MENU  
3
(main menu).  
2 Press theë button to choose DEMO. Then  
press the button.  
3
The DEMO function automatically demonstrates some of the  
TV functions.  
1 Press the ë buttons to choose ON.  
2 Press the  
tings.  
button to complete the set-  
3
The DEMO function is set to ON, and the demonstration  
will start.  
To stop the demonstration:  
Press one of the buttons on the remote  
control.  
When the DEMO function is set to ON:  
Each time the TV is turned on, the demonstration starts  
automatically. If you do not want that to happen, perform  
the following operations to cancel the DEMO function:  
1 Display the DEMO menu again.  
2 Press the ë buttons to choose OFF.  
3 Press the  
function.  
button to cancel the DEMO  
3
5<  
Download from Www.Somanuals.com. All Manuals Search And Download.  
$'',7,21$/#0(18#23(5$7,216  
4 Press the  
buttons to choose FEA-  
ë
'RZQORDGLQJ#WKH#GDWD#WR#9&5  
You can transmit to the latest Programme numbers (PR) data  
to the VCR with the T-V LINK function.  
TURES. Then press the  
button.  
3
The FEATURES menu appears.  
Caution:  
Only when the T-V LINK compatible VCR is connected to  
the EXT-2 terminal, this operation is enabled.  
Only when the T-V LINK menu is being displayed, this oper-  
ation is enabled.  
5 Press the  
buttons to choose DECOD-  
ë
ER (EXT-2) . Then press the  
choose ON.  
buttons to  
ì
An unscrambled picture appears.  
To cancel the DECODER (EXT-2) function:  
Press the buttons to choose OFF.  
ì
1 Turn on the VCR.  
6 Press the  
ting.  
button to complete the set-  
3
2 Press the  
button.  
3
The data transmission begins.  
The T-V LINK menu appears.  
The T-V LINK menu disappears once the data transmis-  
sion ends.  
When the T-V LINK menu is changed over to  
another menu:  
The menu operation at the TV side is completed and it is  
shifted to the menu operation at the VCR side. Refer to  
the VCR Instruction Manual and operate the VCR.  
7 Follow the operating procedure “Down-  
loading the data to VCR” on page 30 to  
transmit the Programme number (PR) data  
to the VCR.  
Note:  
If “FEATURE NOT AVAILABLE” appears at the T-V  
LINK menu, ensure the following three items are cor-  
rect; then press the  
sion.  
button to retry data transmis-  
3
8 If you have another TV channel capable of  
being unscrambled with a Decoder, repeat  
steps 2 through 7.  
Has the T-V LINK compatible VCR been connect-  
ed to the EXT-2 terminal?  
Has the VCR power been turned on?  
Note:  
Does the SCART cable that is connected to the  
EXT-2 terminal to T-V LINK compatible VCR have  
all proper connections?  
If for some reason the DECODER (EXT-2) function  
has been set to “ON” but the TV channel cannot be  
unscrambled, check the following:  
Has the Decoder been connected to the VCR  
properly according to the VCR and Decoder In-  
struction Manuals?  
8VLQJ#WKH#'(&2'(5#+(;705,##  
Has the Decoder power been turned on?  
IXQFWLRQ  
Can the TV channel be unscrambled with a De-  
coder?  
When connecting a Decoder with a T-V LINK compatible VCR  
connected to the EXT-2 terminal, use the DECODER (EXT-2)  
function to unscramble the scrambled TV channels.  
Is it necessary to change the VCR settings in or-  
der to connect the Decoder? Confirm that the  
VCR is set properly by rechecking the VCR In-  
struction Manual.  
1 Turn on the Decoder power.  
2 Display the TV channel capable of being  
unscrambled with the Decoder on the TV.  
Even if the Decoder is functioning, a scrambled picture  
appears at this time.  
3 Press the  
button to display the MENU.  
3
The MENU (main menu) appears.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL MENU OPERATIONS  
6HWWLQJ#WKH#63($.(5#IXQFWLRQ  
Turn off the SPEAKER function so that TV speakers will not  
issue any sound.  
1. Press the  
button to display the MENU  
3
(main menu).  
2. Press the  
buttons to choose SOUND  
ë
SETTING. Then press the  
play the SOUND SETTING menu.  
button to dis-  
3
The SOUND SETTING menu appears.  
3. Press the  
buttons to choose SPEAK-  
ë
ER. Then press the  
OFF.  
buttons to choose  
ì
The sound from the TV speakers are cut.  
4. Press the  
tings.  
button to complete the set-  
3
The menu disappears.  
Note:  
The ì buttons of the TV remote control and the D  
(volume) buttons at the front panel of your TV set can be  
used to control the volume of each speaker simultane-  
ously.  
Setting the volume of the amplifier too high may damage  
the front speakers.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
$'',7,21$/#35(3$5$7,21  
&RQQHFWLQJ#WKH#H[WHUQDO#GHYLFHV  
Connect the devices to the TV, paying attention to the Rear  
panel connections and the Front panel connections.  
Before connecting anything:  
Read the manuals provided with the devices. Depending  
on the devices, the connection method may differ from  
the figure. In addition, the device settings may be  
changed depending on the connection method to secure  
proper operation.  
Turn off all the devices including the TV.  
(Behind the door)  
The “SPECIFICATIONS” on the back cover contains the  
details of the EXT terminals. If you are connecting a de-  
vice not listed in the following connection diagram, see  
the table to choose the best EXT terminal.  
Note that connecting cables are not supplied.  
1 VCR (composite signal)  
2 VCR (composite signal/S-VIDEO signal)  
3 T-V LINK compatible VCR (composite signal/S-VIDEO sig-  
nal)  
4 Decoder  
5 DVD player (composite signal/S-VIDEO signal)  
6 DVD player (composite signal/RGB signal)  
7 TV game (composite signal/RGB signal)  
8 TV game (composite signal/S-VIDEO signal)  
9 Headphones  
0 Camcorder (composite signal/S-VIDEO signal)  
- SCART cable  
= Audio cable  
~ Video cable  
! S-VIDEO cable  
EXT-2  
EXT-3  
S
S
L
R
EXT-1  
AUDIO OUT  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL PREPARATION  
'HYLFHV#ZKLFK#FDQ#RXWSXW#WKH#  
609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV  
D#609+6#9&5  
&RQQHFWLQJ#6SHDNHUV2$PSOL0  
ILHU  
While referring to the Audio equipment connection diagram,  
connect the audio equipment you desire to the TV.  
You can use external front speakers to listen to the TV sound  
instead of the TV speakers. For details of how to operate  
them, see “Setting the SPEAKER function” on page 31.  
Connect the device to an EXT terminal other than the EXT-1  
terminal.  
You can choose a video input signal from the S-VIDEO signal  
(Y/C signal) and regular video signal (composite signal). For  
details of how to operate the device, see “K(S-VIDEO in-  
put)” on page 21.  
Before connecting anything:  
Read the manuals provided with the amplifier and speak-  
ers.  
709#/,1.#FRPSDWLEOH#9&5  
Turn the TV and Amplifier off.  
Be sure to connect the T-V LINK compatible VCR to the EXT-  
2 terminal. If not, the T-V LINK function will not work properly.  
To prevent magnetism from the speakers adversely ef-  
fecting the TV screen, use magnetic-shielded speakers  
for the front speakers.  
Note:  
When connecting a T-V LINK compatible VCR to the EXT-  
2 terminal, be sure to connect the Decoder to the VCR. If  
not, the T-V LINK function may not work properly. After  
you have registered TV channels to the Programme num-  
bers (PR), set the DECODER (EXT-2) function for the Pro-  
gramme number (PR) to ON in order to unscramble a  
scrambled TV channel. For details of operation, see “Us-  
ing the DECODER (EXT-2) function” on page 30.  
Note that connecting cables are not supplied.  
2
1
L
R
AUDIO OUT  
(Terminals on rear)  
&RQQHFWLQJ#KHDGSKRQHV  
Connect the headphones with a stereo mini-jack (of 3.5mm in  
diameter) to the headphone jack at the TV front panel.  
1 Amplifier  
2 Front speakers (Magnetic-shielded type)  
Note:  
Note:  
When you connect the headphones, the TV speakers is-  
sue no sound.  
The output from the AUDIO OUT terminal is not interrupt-  
ed by headphone connection to the TV. You cannot cut  
the sound from the front speaker even if you connect a  
headphone to the TV.  
9LGHR2VRXQG#VLJQDO#RXWSXW#IURP#WKH  
(;705#WHUPLQDO  
You can arbitrarily change over the output of the video/sound  
signal from the EXT-2 terminal. It is useful when you want to  
dub the video/sound from another device on the VCR con-  
nected to the EXT-2 terminal. For details on how to do this op-  
eration, see “DUBBING” on page 22.  
79#RXWSXW#IURP#WKH#(;704#WHUPLQDO  
The output of video/sound signal of a TV channel you are cur-  
rently viewing is always output from the EXT-1 terminal.  
Note:  
Changing over a Programme number (PR) also changes  
over the TV output from the EXT-1 terminal.  
The video/sound signal from an EXT terminal cannot be  
output.  
Teletext programmes cannot be output.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79#%877216#$1'#3$576  
)URQW#3DQHO  
l
Push to open  
(Behind the cover)  
2
3
4
1
-
5
8
9
0
6
7
1 EXT-4 terminal  
pages 21 and 32  
pages 32  
7 HYPER SOUND lamp  
8 ECO lamp  
pages 12 and 20  
page 17  
2 Headphone jack (mini jack)  
3 D (Volume) button  
4 P /buttons / –/+ buttons  
5 Remote control sensor  
6 ECO sensor  
page 10  
9 SLEEP TIMER lamp  
0 Power lamp  
page 23  
page 10  
pages 5 and 8  
pages 5 and 8  
- Main power button  
Caution:  
Do not grasp the TV by the front panel cover when moving the TV set. If you do, you may break the cover.  
5HDU#3DQHO  
EXT-2  
EXT-3  
S
S
L
R
EXT-1  
AUDIO OUT  
= AUDIO OUT terminal  
~ Aerial socket  
page 33  
page 4  
@ EXT-2 terminal  
# EXT-3 terminal  
pages 4, 7, 21 and 32  
pages 21 and 32  
! EXT-1 terminal  
pages 4, 21 and 32  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7528%/(6+227,1*  
If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired.  
You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has  
problems, you may think there is a problem with the TV itself.  
Important:  
This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are  
operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.  
After you have followed the Troubleshooting description or the operating description of the functions concerned without any suc-  
cess, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or  
remove the rear cover of the TV.  
When the TV channel reception is poor, it can be hard to  
,I#\RX#FDQQRW#WXUQ#RQ#WKH#79  
hear the stereo or bilingual sound. In this case, follow the  
Is the AC plug connected to the AC outlet?  
description “STEREO / I•II” on page 20 to hear the sound  
more easily by changing it to a mono sound.  
Is the Power lamp lit? If not, press the Main power button.  
2SHUDWLRQ#GLVDEOHG  
1R#SLFWXUH21R#VRXQG  
Have the batteries of the remote control become exhaust-  
ed? Follow the description “Putting Batteries into the Re-  
mote Control” on page 4 and replace them with new  
batteries to try to solve the problem.  
Have you chosen a TV channel whose reception is extreme-  
ly bad? In this case, the BLUE BACK function will be activat-  
ed, the entire screen becomes blue, and the sound is muted.  
In spite of this, if you want to view the TV channel, follow the  
description “BLUE BACK” on page 23 to try to change the  
BLUE BACK function setting to OFF.  
Have you attempted to use the remote control at the sides  
or rear of the TV or at a location more than seven meters  
apart from the TV location? Operate the remote control in  
the front of your TV or a location less than seven meters  
from your TV to try to solve the problem.  
Have you connected the headphones to the TV? Connect-  
ing the headphones to the TV causes sounds not to be is-  
sued from the TV speakers.  
When you are viewing a teletext programme, you cannot op-  
Have you set the SPEAKER function to OFF? Follow the de-  
scription “SPEAKER” on page 20 to confirm the SPEAKER  
function setting to try to solve the problem.  
erate the menus. Press the  
button to return the teletext  
4
programme to the ordinary TV programme to try operating  
the menus.  
3RRU#SLFWXUH  
If noise totally obscures the picture (snow), the aerial or aer-  
ial cable may have trouble. Check the following to try to  
solve the trouble:  
If the TV operation becomes disabled suddenly, press the  
Main power button on the TV and turn off the main power.  
Try to press the Main power button again to turn on the main  
power. If the TV returns to a normal state, it is not a failure.  
Has the TV and aerial been connected properly?  
Has the aerial cable been damaged?  
Is the aerial pointed to the right direction?  
Is the aerial itself faulty?  
2WKHU#FRQFHUQV  
When the SLEEP TIMER function operates, the TV is auto-  
matically turned off. If the TV is turned off suddenly, try to  
press the  
(Standby) button to turn on the TV once  
=
again. At this time, if the TV resumes a normal state, there  
If the TV or aerial receives interference from the other devic-  
es, stripes or noise may appear in the picture. Move such  
devices as an amplifier, personal computer, or a hair drier  
that can cause interference away from your TV, or try  
changing its location. If the aerial suffers interference from a  
radio tower or high-voltage wire, please contact your local  
dealer.  
is no problem.  
When the TV is receiving a wide-screen signal (WSS) or a  
signal concerning the screen size from an external device,  
the ZOOM mode automatically changes. When you want to  
resume the previous ZOOM mode, press the ZOOM button  
again.  
If the TV receives interference from signal reflecting from  
mountains or building, double-pictures (ghosting) will occur.  
Try to change the aerial’s direction or replace the antenna  
with the one with better directionality.  
If you bring a magnetised device such as a speaker near to  
your TV, a picture may be warped or unnatural colors ap-  
pear at he corners of the screen. In this case, keep the de-  
vice apart from your TV. If the speakers causes such  
phenomena, use the magnetic-shielded speakers instead.  
Are your COLOUR SYSTEM settings correct? Follow the  
description “COLOUR SYSTEM” on page 18 to try to solve  
the trouble.  
A picture may be tited due to the influence of the earth’s  
magnetism. In this case, use the “PICTURE TILT” on  
page 19 to complete the tilt.  
Has COLOUR or BRIGHT been controlled properly? Follow  
the description “Picture Adjustment” on page 17 to try to ad-  
just them properly.  
The TV may emit a crackling sound due to a sudden change  
in temperature. It does not matter if a picture or sound does  
not show any abnormality. If you hear crackling sounds fre-  
quently while you are viewing the TV, other causes may be  
assumed. For precautionary purposes, request your service  
technician to inspect it.  
Videotaping teletext is not recommended because it may  
not record correctly.  
When a white and bright still image (such as a white dress)  
is displayed on the screen, the white part may look as if it  
were coloured. It is a phenomenon unavoidable due to the  
nature of the picture tube itself, and not due to a TV failure.  
When the picture disappears from the screen, the unnatural  
colours will also disappear.  
Touching the screen may cause you feel a slight electric  
shock due to its static electricity. It is an unavoidable phe-  
nomenon due to the construction of the picture tube. It is not  
a problem with the TV. You can rest assured that this static  
discharge does not have harmful influence over the human  
body.  
3RRU#VRXQG  
Have you adjusted BASS or TREBLE properly? If not, follow  
the description “Sound Adjustment” on page 20 to try to ad-  
just them properly.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63(&,),&$7,216  
Model  
AV-28WFT1EI*  
Item  
Broadcasting systems  
Colour systems  
CCIR I  
PAL  
The EXT terminals also support the NTSC 3.58/4.43 MHz system.  
Channels and frequencies  
Sound-multiplex systems  
Teletext systems  
Power requirements  
Power consumption  
Picture tube size  
Audio output  
IR A-J, E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2  
NICAM (I) system  
FLOF (Fastext), WST (World Standard Text)  
220 - 240 V AC, 50 Hz  
Maximum: 168 W, Average: 115 W, Standby: 0.8 W  
Viewable area 66 cm (measured diagonally)  
Rated Power output: 7.5 W + 7.5 W  
Speakers  
(16cm × 4cm) oval × 2  
EXT-1 terminal  
Euroconnector (21-pin, SCART)  
Video input, Audio L/R inputs and RGB inputs are available.  
TV broadcast outputs (Video and Audio L/R) are available.  
EXT-2 terminal  
Euroconnector (21-pin, SCART)  
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
Video and Audio L/R outputs are available.  
T-V LINK functions are available.  
EXT-3 terminal  
EXT-4 terminal  
Euroconnector (21-pin, SCART)  
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
RCA connectors × 3  
S-VIDEO connector × 1  
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
AUDIO OUT terminal  
RCA connectors × 2  
Variable audio L/R outputs are available.  
Variable out 0-1 Vrms, low impedance  
Headphone jack  
Dimensions (W × H × D)  
Weight  
Stereo mini-jack (3.5 mm in diameter)  
780 mm × 509 mm × 499 mm  
39 kg  
Accessories  
Remote control unit RM-C51 × 1  
AAA/R03 dry cell battery × 2  
* A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating  
the colour of the TV set.  
Design and specifications subject to change without notice.  
Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration pur-  
pose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this  
constitutes an infringement of copyright.  
LCT0622-001A-U  
0300-T-CR-JMUK  
©2000 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware 80C186EA User Manual
Intel Network Hardware 05 1662 005 User Manual
Invacare Wheelchair CMEX User Manual
IOGear Home Theater Server GUWAVKIT User Manual
JBL Speaker 4344MKII User Manual
Jenn Air Cooktop 8111P533 60 User Manual
John Deere Cordless Saw ET 3406 J User Manual
Kenmore Microwave Oven 56560582 User Manual
Kenwood Two Way Radio TH G71A User Manual
KitchenAid Gas Grill KDRP467K User Manual