VIDEO CD PLAYER
XL-MV7000GD
VCD
TV
/
/
DOLBY
V.EFFECT SURROUND
MPX
V.REPLACE
CD1
KEY CONTROL
ON SCREEN
CD3
CD2
SELECT
SLOW
XL-MV7000 VIDEO CD PLAYER
1
2
3
4
5
6
7
CD3
CD2
CD1
RANDOM PROGRAM CANCEL
VIDEO
B.MARK
CD
CD
STANDBY
VOCAL
DOLBY
MPX
UP
/
EFFECT
SURROUND
INTRO HIGHLIGHT B.DIGEST B.SEARCH
8
STANDBY/ON
KEY CONTROL
NORMAL
DOWN
POWER
ON OFF
9
NORMAL PBC OFF
1
5
9
2
6
3
7
4
8
3
CD
CD
RETURN
STILL
10
PLAY & EXCHANGE
MIC
1
MIC
2
MIC
3
DIGITAL ECHO
PROGRAM
+10
VIDEO INTRO
BOOK DIGEST
BOOKMARK
B.SEARCH
ATIME
10
+10
REPEAT SUBTITLE
MIN
MAX
MIN
MAX
MIN
MAX
SHIFT
TV/VIDEO
TV ch
TV VOL
MIN
MAX
SELECT
SUBTITLE
PREV
NEXT
PHONES
DESIGNED BY JVC
RM-SXLMV777U
MULTI BRAND REMOTE CONTROL
'
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bottom or
side of the cabinet. Retain this information for
future reference.
INSTRUCTIONS
Model No.
Serial No.
LVT0462-001A
[U,US]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLO-
SURE
2
WARNING LABEL, PLACED INSIDE THE UNIT
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad.
strålen.
Betrakta
ej
(s)
CLASS
LASER
1
TO BEAM.
(e)
PRODUCT
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
telse for stråling
(d)
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to quali-
fied service personnel.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
We would like to thank you for purchasing one of our JVC products.
Before connecting this unit to the wall outlet, read the instructions
carefully to ensure that you obtain the best possible performance. If
you have any questions, consult your JVC dealer.
Table of contents
Care and handling of compact discs ......................................................... 1
GENERAL INFORMATION ...................................................................... 1
BEFORE USING FOR THE FIRST TIME ................................................. 2
Basic connections ..................................................................................... 2
Connecting the player to a TV or amplifier/receiver using the Audio
Video cable ....................................................................................... 2
Connecting the player to an amplifier/receiver equipped with the
analog discrete inputs ....................................................................... 2
Video out select ................................................................................... 2
Connecting the AV COMPU LINK cable.............................................. 3
Connecting the power cord.................................................................. 3
Installing batteries ..................................................................................... 3
Putting batteries in the remote control ................................................. 3
OVERVIEW OF CONTROLS ................................................................... 4
Front panel .......................................................................................... 4
Remote control unit ............................................................................. 5
BASIC OPERATIONS .............................................................................. 6
Now you can play a variety of discs!! ........................................................ 6
Overview of the two play modes.......................................................... 6
Triple disc tray usage .......................................................................... 6
Display window .................................................................................... 6
Preparation for playing ........................................................................ 6
Inserting/removing disc(s) ................................................................... 7
Starting to play disc(s) ......................................................................... 7
Using number keys .............................................................................. 7
Stopping play ....................................................................................... 8
Pausing play ........................................................................................ 8
Skipping the track ................................................................................ 8
Manual search ..................................................................................... 8
Slow-motion playback on the remote control unit ................................ 9
Using stereo headphones.................................................................... 9
Setting TV TYPE ................................................................................. 9
Selecting the Dolby Surround mode .................................................. 10
To adjust the output balance of speakers.......................................... 10
Using the remote control ......................................................................... 11
Presetting the remote control to operate your own TV ...................... 11
Using the SHIFT button on the remote control unit ........................... 11
Preset code table............................................................................... 12
VARIOUS UNIQUE FUNCTIONS........................................................... 13
Various functions to enhance your enjoyment ........................................ 13
Display of operations status .............................................................. 13
Programming the track sequence you want ...................................... 13
Canceling a programmed track ......................................................... 13
Clearing a program ............................................................................ 13
Repeating tracks................................................................................ 14
Randomly playing tracks ................................................................... 14
Playing back a track from the desired time........................................ 14
Playing a multiplex sound CD............................................................ 15
Viewing the VIDEO INTRO................................................................ 15
Programming during VIDEO INTRO.................................................. 15
Viewing the highlights ........................................................................ 16
Playback with the Bookmark function ..................................................... 17
Marking segments for later viewing with the Bookmark function ......... 17
Using the BOOK DIGEST button....................................................... 17
Using the B. SEARCH button ............................................................ 17
Canceling individual bookmarks ........................................................ 18
Canceling all bookmarks on individual discs ..................................... 18
Using a microphone ................................................................................ 19
Using a wired microphone ................................................................. 19
Adjusting music key ........................................................................... 19
Adjusting echo effect ......................................................................... 19
Vocal replace ..................................................................................... 20
Vocal effect ........................................................................................ 20
OPERATION OF PLAYBACK CONTROL FUNCTION ......................... 21
Playing Video CDs and SVCDs with Playback Control function ............. 21
Video CDs and SVCDs with Playback Control function .................... 22
RESTRICTING USE OF YOUR DISCS .................................................. 23
Locking a disc with the Read-Protect function ........................................ 23
Locking a disc .................................................................................... 23
Canceling Read-Protect .................................................................... 23
Releasing the Read-Protect temporarily............................................ 23
DIGITAL AUDIO CDs ............................................................................. 24
Playing Digital Audio CDs ....................................................................... 24
Playing Digital Audio CDs.................................................................. 24
Unavailable functions for Audio CDs ................................................. 24
AV COMPU LINK REMOTE CONTROL SYSTEM ................................ 25
AV COMPU LINK remote control system ............................................... 25
Connection and setup........................................................................ 25
Operation ........................................................................................... 25
SPECIFICATIONS .................................................................................. 26
Main specifications.................................................................................. 26
TROUBLESHOOTING ........................................................................... 27
Troubleshooting ...................................................................................... 27
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Care and handling of
compact discs
How to handle CDs
Which compact discs can be used?
When handling a compact disc, do not touch the surface of the disc
(reflective silver side –– the side without the label).
Since compact discs are made of plastic, they are easily damaged. If
a disc gets dirty, dusty, scratched or warped, the sound will not be
picked up correctly and, in addition, such a disc may cause the CD
player to malfunction.
Many types of compact discs are sold for a variety of uses. The player
can play the following compact discs:
•
SVCD (Super VCD) discs
*Better video resolution using MPEG2 and VBR
(Variable Bit Rate) technologies.
*Up to four languages can be included as subtitles
or song lyrics.
*Up to four languages can be included as audio.
•
•
Video CD discs both with and without PBC
function
PlayBack
Control
Care of the label side
Do not damage the label side, stick paper to, or use any adhesive on
its surface.
Audio CD discs
'
Storage
Make sure that discs are kept in their cases. If discs are piled one on
topofanotherwithouttheirprotectivecases,theycanbedamaged. Do
notputdiscsinalocationwheretheymaybeexposedtodirectsunlight,
or in a place where the humidity or temperature is high. Avoid leaving
discs in your car!
Discs you can't play back
Any other discs than listed above (such as CD-ROM, DVD or CD-I
discs) cannot be played. Playing back such discs may generate noise
and damage your speakers.
* Even though a logo listed above is printed on the disc, it may not be
played if it is a non-standard disc.
Maintenance of discs
If there are fingerprints or dirt adhering to a disc, wipe it with a soft dry
cloth, moving from the center outwards.
Using the remote control
The remote control is ready to use when its batteries are installed
properly.
If a disc is difficult to clean, wipe with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
To use it, point its infrared light-emitting window toward the display
window of the player and press a button. The operating range of the
remote control is up to about seven meters in front of the player and
within about 30 degrees to each side –– with nothing between the
remote control and the player interrupting the beam path.
If pressing a button on the remote control does not produce any
response, check to make sure it is pointed correctly and try again. If it
still does not function, check the batteries.
CAUTION
Sometimes during play noise or images may be garbled. This is
sometimes due to the disc. (It may not be up to industry standards.)
These symptom are caused by the discs, not by the malfunction of
the player.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Basic connections
The Video CD player must be connected directly to a television set or,
Connecting the player to an amplifier/
receiver equipped with the analog dis-
crete inputs
an amplifier or receiver that is connected to a television or monitor.
Select a level, dry location free of dust and vibration, having a
temperature maintained between 5 and 35°C (41 and 95°F).
Connecttheplayer’s5-channeloutputs(AUDIOOUTFRONT-RIGHT/
LEFT, AUDIO OUT SURROUND-RIGHT/LEFT, and AUDIO OUT
CENTER) to the analog discrete inputs of an amplifier/receiver using
audio cables, while the VIDEO OUT to the television’s video input
terminal using the yellow plugs of the supplied Audio Video cable. Be
sure to connect correctly between corresponding terminals.
Connecting the player to a TV or ampli-
fier/receiver using the Audio Video cable
First make the audio and video connections before connecting the AC
power cord. Also, make sure that the equipment (television, amplifier
or receiver) to be connected with the player is turned off.
Firmly insert the yellow pin plug of the Audio Video cable in the yellow
VIDEO OUT jack on the rear panel of the player; the red pin plug in the
red AUDIO OUT FRONT (RIGHT) jack; and the white pin plug in the
white AUDIO OUT FRONT (LEFT) jack. (The RIGHT and LEFT output
jacks are for the right and left audio channels.)
To input FRONT
jack of the
amplifier/receiver
ThenfirmlyinsertthepinplugsattheotherendoftheAudioVideocable
into the matching video and audio INPUT jacks.
If your television set has an S-video input, we recommend you to
connect it with S-VIDEO OUT of the player using the optional S-Video
cable, in addition to the (standard) video connection, to get a better
picture quality.
To input REAR
jack of the
amplifier/receiver
To input audio jack of
the television/amplifier/
receiver
Audio cable
(optional)
Audio cable (optional)
Audio Video cable (supplied)
To input CENTER jack of
the amplifier/receiver
Video out select
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL,
or MULTI mode according to your television system.
Audio Video cable (supplied)
To input video jack of
the television/amplifier/receiver
NTSC .................... for NTSC exclusive TV
PAL ....................... for PAL exclusive TV
MULTI ................... for Multisystem TV
To input S-Video jack of
the television/amplifier/receiver
S-Video cable (optional)
Note
•
Set the switch before turning the power on. If you change the switch
position while the power is on, the new setting does not become
effective until you turn the power to standby and then on.
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Installing batteries
Connecting the AV COMPU LINK cable
Putting batteries in the remote control
Connect with other JVC equipment supporting the AV Compulink by
using the supplied AV COMPU LINK cable to facilitate operations.
See “AV COMPU LINK remote control system” on page 25.
The battery compartment is located on the back of the remote control.
1. Insert your finger in the recess under the battery compartment
cover, and pull off the cover.
2. Place the two accessory R6P (SUM-3)/AA (15F) batteries in the
remote control according to the polarity markings (“+” and
“–”) inside the compartment and on the batteries.
AV COMPU LINK cable
To AV COMPU LINK jack
of another JVC equipment
Connecting the power cord
IMPORTANT
Check the setting of the VOLTAGE SELECTOR switch on the rear
panel of the player.
Change the setting if the switch is not set for the main voltage
supplied to your home.
After the audio-video connectors had been connected, insert the
female end of the power cord firmly into the AC POWER CORD socket
located on the rear panel of the player. Then insert the male end of the
power cord into the wall outlet.
3. Insert the two tabs of the cover in their respective slots, and
snap the cover in place.
When the power cord is connected and the POWER ON/OFF button
is depressed (ON), the STANDBY indicator on the left-hand side of the
player’s front panel comes on. See “Overview of Controls” for a
description of the controls on the player.
The batteries last about one year with normal use. If function of the
remote control become erratic, replace the batteries.
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. Their
life will be shortened, they may burst or their contents may leak if they
are used improperly.
AC power cord
Wall outlet
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF CONTROLS
The following is an explanation of the basic function of controls on the
front panel of the player and the remote control. The function of some
controls may be restricted in actual use depending on the
on-going operations. The remote control has fourteen unique func-
tion buttons in addition to those on the player.
XL-MV7000 VIDEO CD PLAYER
3
4
5
13
CD
STANDBY
VOCAL
EFFECT
DOLBY
SURROUND
MPX
/
1
2
CD
STANDBY/ON
KEY CONTROL
NORMAL
DOWN
MIC 1
UP
POWER
ON OFF
NORMAL PBC OFF
3
CD
CD
RETURN
6
7
PLAY & EXCHANGE
8
MIC 2
MIC 3
DIGITAL ECHO
VIDEO INTRO
BOOK DIGEST
9
16
17
14
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
10
12
SUBTITLE
PREV
PHONES
15
11
Left front panel of the player
Center front panel of the player
(Controls marked (R) have equivalents on the remote control.)
13
CD1 to CD3 trays
/
1
(STANDBY/ON) button (R)
Turns the player on or to STANDBY.
STANDBY indicator (Red)
Used to load discs. To insert/remove discs, press the 0 (OPEN/
CLOSE)buttonlocatedattherightofthetraycorrespondingtodisc
number.
2
14
VIDEO INTRO button (R)
Lights when the POWER ON/OFF button is depressed and the
Applies to Video CD and SVCD discs only. The introductory
several seconds of tracks on a disc are displayed on the television
screen in order to present the contents of the disc.
SUBTITLE button (R)
Effective only when playing back an SVCD disc. SVCD discs may
have up to four subtitles which you can select to see on the TV
screen (as an optional feature). Pressing this button cycles the
subtitles as shown below.
player is in standby mode.
3
VOCAL EFFECT button (R) with indicator (Green)
Selects the vocal effect mode for the microphone inputs (1 through
3). Pressing this button cycles the modes as shown below.
HARMONY → CHORUS → FLANGE → OFF
DOLBY SURROUND button (R) with indicator (Green)
Selects the Dolby surround mode. See page 10.
MPX button (R) with indicator (Green)
15
4
5
Selects the audio channel(s) of a disc to be monitored. See
“Playing a multiplex sound CD” on page 15.
POWER ON/OFF button
Turns the power to standby or completely off.
PLAY MODE switch
Switches between the NORMAL and PBC modes. It only affects
Video CD and SVCD discs with PBC function.
NORMAL: Allows use of the Playback Control (PBC) function.
PBC OFF: Inhibits the PBC function.
KEY CONTROL buttons (R) with indicator (Green)
Transposes the music key.
Subtitle 1 → Subtitle 2 → Subtitle 3 → Subtitle 4 → OFF
Display window
Shows information about the status of operation.
BOOK DIGEST button (R)
Displays video segments you marked with the Bookmark function.
See page 17.
16
17
6
7
8
Right front panel of the player
0 (OPEN/CLOSE) buttons (CD number 1 to 3)
18
Used to open and close disc trays 1 to 3 respectively. When, after
openingtheCD1tray,another0(OPEN/CLOSE)buttonispressed,
the CD1 tray is first closed, then the other CD tray selected is
opened.
DOWN button: used to flatten by a half tone.
NORMAL button: returns to original key.
UP # button:
used to sharpen by a half tone.
9
DIGITAL ECHO knob
Adjuststhedegreeoftheechoeffectforthemicrophone(1through
3) voice.
MIC 1 to MIC 3 knobs
Adjusts volume of the microphone corresponding to MIC number.
PHONE jack
CD1 through CD3 buttons (R) with indicators (Green)
Plays the disc of the number indicated on the button. As soon as
the disc begins playing, the indicator blinks.
RETURN button (R)
Utilized for operation with the PBC function. This button is used to
return to a menu screen during play.
19
20
10
11
Used for connecting stereo headphones. The volume is set to a
predetermined level and is not adjustable.
MIC jacks (1 through 3)
Used for connecting microphones (1 through 3). The jacks corre-
spond to MIC 1 to 3 volume knobs located above.
21 8 (PAUSE)/STILL button (R)
Temporarily suspends playing. Video motion freezes and audio
reproduction stops. Pressing the button repeatedly advances the
picture frame-by-frame. (Video CD and SVCD only)
12
BOOKMARK button (R) with indicator (Green)
Places a “bookmark” at video segments you want to find later for
almost instant replay. See page 17.
22
23
B. SEARCH button (R) with indicator (Green)
Retrieves video segments which you marked with a bookmark.
See page 17.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF CONTROLS
VCD
TV
/
/
DOLBY
SURROUND
V.EFFECT
MPX
V.REPLACE
CD1
The controls with identical names on the player and on the remote
control have the same function and are used in the same manner.
31
33
KEY CONTROL
ON SCREEN
CD3
32
34
CD2
SELECT
18
19
1
2
3
4
5
6
7
SLOW
CD3
CD2
CD1
8
26
35
37
9
RANDOM PROGRAM CANCEL
VIDEO
B.MARK
20
STILL 21
10
36
38
INTRO HIGHLIGHT B.DIGEST B.SEARCH
PROGRAM
27
+10 28
BOOKMARK
B.SEARCH
22
23
29
30
1
5
9
2
6
3
7
4
8
SELECT
25
NEXT
DESIGNED BY JVC
24
39
43
ATIME
10
+10
REPEAT SUBTITLE
40
SHIFT
TV/VIDEO
TV ch
TV VOL
44
41
42
RM-SXLMV777U
MULTI BRAND REMOTE CONTROL
24 4 / ¢ PREV / NEXT buttons (R)
During operation with the Playback Control function
Invokes previous or next screen.
During operation without the Playback Control function
Used to skip track(s) forward or backward from the current track
being played, or to shift the playing location backward or forward
quickly.
Jog/Shuttle dial
Used to play forward or backward quickly.
25
26
Number keys (1 to 10) (R)
SLOW button
Starts slow-motion playback.
1 / ¡ MANUAL SEARCH button
34
35
Used to specify a track number for playing or programming.
To select a number between 1 and 10, press the corresponding
keyforthenumber. Toselectanumberhigherthan10, usethe+10
key. The maximum number you can specify is 99.
See “Using number keys” on page 7 for the examples.
These keys are also used to select a menu item number. See also
“Operation of Playback Control function” on page 21.
PROGRAM button (R)
Any desired sequence of tracks can be programmed with the
number keys and the +10 button. (On the remote control use +10)
The program button cannot be used while the Playback Control
function is activated.
Shifts the playing location backward and forward quickly. Holding
down the button causes it to go much faster.
RANDOM button
36
37
Changes the disc track program to a random sequence from disc
1 through 3 respectively.
CANCEL button
Cancels the latest track you have programmed. The latest pro-
grammed track is canceled whenever you press this button. Also
used to cancel a bookmark.
27
28
38
39
HIGHLIGHT button
Applies to a video CD and SVCD discs to see highlights of a track.
Displays the first several seconds of each of nine equal-time
segments of the track.
+10 button (R)
Used when specifying a number which is higher than 11. See
“
26 Number keys” above and “Operation of Playback Control
ATIME button
function” on page 21.
Used to play back a disc track from the desired time. See page 14.
29 7 (STOP) button (R)
40 REPEAT button
Stops play.
Repeats a track or inserted discs from 1 to 3.
SHIFT button
Used together with other keys for various functions. See page 11.
TV/VIDEO button
Sets the input mode of the TV. Also used to preset the remote
controlunit, tocontrolsomefunctionsonyourTVset. Seepage11.
TV ch – / TV ch + keys
Changes the television channel.
TV VOL + / TV VOL – keys
3 (PLAY)/SELECT button (R)
30
41
Starts to play the disc.
42
Remote control unit
31
/
/
VCD
/TV
button
Turns the player on and to STANDBY.
When pressed after you hold down the SHIFT button, turns the TV
on or off.
V.REPLACE button
Activates the vocal replace function, inserting your voice in place
of the disc vocals.
43
44
32
33
Turns the TV volume up or down.
ON SCREEN button
Controls whether or not control and operation status are displayed
on the television screen or monitor.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Now you can play a
variety of discs!!
Overview of the two play modes
Display window
The player has two play modes for Video CD and SVCD discs. These
are selected by the PLAY MODE switch on the left side of the front
The display window indicates many aspects of control and operation
status.
4
panel.
NORMAL PBC OFF
NORMAL:
PBC OFF:
Allows use of the Playback Control (PBC) function.
Inhibits the PBC function.
1
2
5
3
It only affects Video CD and SVCD discs with PBC function.
1
Shows the disc number being played.
2
Showsmainlythetotalnumberoftracksandthetracknumberbeing
played.
Triple disc tray usage
3
Mainly shows the cumulative time (minutes and seconds) of the
track when the player is playing. It also shows the total time of the
disc for about ten seconds after the player stops playback, or
finishesreadingthediscinformationwhenadischasbeeninserted.
Shows the type of disc being played.
Uptothreediscscanbeloadedintheplayer. Youmayinsertadiscinto
any of the disc trays 1 through 3.
If you want to play only a specified disc, press the corresponding CD
1, 2 or 3 button located to the right of the 0 (OPEN/CLOSE) button.
4
5
Each indicator in this area lights when the corresponding function
is activated.
When three discs are inserted, basic order of playing is as follows.
•
•
•
Pressing CD 1: CD 1 → CD 2 → CD 3 → STOP
Pressing CD 2: CD 2 → CD 3 → CD 1 → STOP
Pressing CD 3: CD 3 → CD 1 → CD 2 → STOP
Preparation for playing
Turn on the television set, amplifier or receiver to which the player
is connected. Then set the channel and modes properly to accept
the player’s output signal.
CD3
CD2
CD1
CD
CD
3
CD
CD
PLAY & EXCHANGE
CAUTION
Setthesoundvolumeofthetelevisionset, amplifierorreceiver
to which the player is connected to a reasonable level before
starting playback.
Press the POWER ON/OFF button.
POWER
ON OFF
Press the
/
button on the front panel or the VCD
/
(TV
/
) button
on remote control. The STANDBY indicator goes out.
VCD
TV
/
/
/
or
STAND/ON
(Remote control)
The display window shows the initial information as shown below.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
If the PBC function is activated, the display window shows "Pb"
and the menu is displayed on the television screen. See page 21
for the "operation of PBC function".
If the PBC function is not activated, the player starts playback from the
first track of the disc.
Inserting/removing disc(s)
Press the 0 (OPEN/CLOSE) button (1 through 3) to open the disc
tray. Then place the disc in the round recess of the tray with label
side up. To close the tray, press the 0 (OPEN/CLOSE) button
again.
•
•
•
For individual track selection, use the number keys (see the
explanation below) or the 4 / ¢ buttons.
During playback, the display window shows the disc number and
the track number being played.
If you press the 0 (OPEN/CLOSE) button of the disc which is playing,
the player stops and then opens the tray.
If you press the 0 (OPEN/CLOSE) button of a disc that is not being
played, you can change discs without stopping play.
When you press 3 button during play, the disc will restart from the
beginning of the track.
CD3
CD2
CD1
Using number keys
IfthePBCfunctionisnotactivated, youcanselectatracknumber
by using the numeric keys.
On the player .................... 1 to 10 and +10 key
Example: For number 5, press 5. For number 15, press +10, then 5.
For number 20, press +10, then 10. For number 32, press +10 three
times, then 2.
Note
•
When loading a disc in the disc tray, be sure to position the disc
inside the recess. Otherwise, the disc will be damaged when the
disc tray is closed, and the disc cannot be removed from the unit.
1
2
3
4
5
6
7
8
9
CD
10
Tray
+10
CORRECT
INCORRECT
On the remote control ..... 1 to 10 and +10 key
Select numbers as described above.
Starting to play disc(s)
1
5
9
2
6
3
7
4
8
Press the 3 (PLAY)/SELECT button. The player starts to play
from the disc indicated in the display window.
Or, press one of the CD 1 through 3 buttons to start to play the
corresponding disc.
10
+10
SELECT
or
Note
•
Whenyouselectthetrackusingthenumberkeys, thetrackwillstart
playing without pressing 3 (PLAY)/SELECT button.
(Remote control)
CD3
CD1
CD2
CD3
CD2
CD1
or
(Remote control)
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Stopping play
Manual search
Press the 7 (STOP) button to stop play at any time.
During play, you can search the disc position by using the shuttle
dial, or 4 / ¢ buttons on the player or 4 / ¢ buttons on the
remote control unit.
Rotating the shuttle dial to the right causes the disc to play
forward quickly. Rotating it to the left causes it to play backward
quickly.
or
(Remote control)
Pausing play
BOOKMARK
B.SEARCH
Press the 8 (PAUSE)/STILL button to temporarily suspend play.
STILL
or
(Remote control)
Notes
Holding down the 4 / ¢ buttons on the player or the 1 / ¡
buttonsontheremotecontrolunitcausesthedisctoplayforward
or backward quickly.
Continuing to hold down the buttons causes it to search much
faster.
•
When the 8 (PAUSE)/STILL button is pressed once, “PAUSE”
appears on the television screen, the video motion freezes and the
sound is turned off. The still picture advances frame-by-frame each
time the 8 (PAUSE)/STILL button is pressed. This frame-by-frame
function is available only for Video CDs and SVCDs.
To release the pause, press the 3 (PLAY)/SELECT or blinking CD
1 through 3 button.
•
•
2-1
1:30
B 3 3 – – – E M.SEARCH
During “PAUSE” the time counter on the display will blink.
(Remote control)
Skipping the track
(Television screen)
IfthePBCfunctionisnotactivated, youcanskiptrack(s)byusing
the 4 / ¢ buttons during play.
Notes
•
In some circumstances, this function is not available when the PBC
function is activated.
Pressing the 4 button skips the current track backward, while
pressing ¢ skips forward.
•
The angle at which you hold the shuttle dial determines the manual
search speed.
PREV
NEXT
or
(Remote control)
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Slow-motion playback on the remote
control unit
Setting TV TYPE
To playback SVCD discs which are recorded for wide-screen televi-
sions correctly, select the TV TYPE to match your television.
Press the SLOW button to play in slow-motion. By pressing the
SLOW button consecutively, the playback speeds are cycled as
shown below.
Operation
1. While the player is in stop mode, press and hold the
RETURN button until the following display appears on the
television screen.
SLOW
(Remote control)
RETURN
TV TYPE
PLAY. NORMAL
STOP. WIDE
1/4
1/8
1/16
Normal
Note
This function can only be used when playing a video CD or SVCD.
•
2. If your television is a normal television, press the 3 (PLAY)/
SELECT button of the player to select NORMAL.
If your television is a wide-screen television, press the 7
(STOP) button of the player to select WIDE.
Using stereo headphones
The following display appears.
Connecting stereo headphones
Connect stereo headphones to the PHONES jack at the lower-left of
the front panel. The volume level is fixed and cannot be adjusted.
TV TYPE
PLAY. OK
PHONES
STOP. CANCEL
3. Press the 3 (PLAY)/SELECT button to complete the setting.
Pressing the 7 (STOP) button returns to the previous display
for selection.
Notes
•
The TV TYPE setting is effective for SVCD discs recorded for wide-
screen television.
•
•
The initial setting is NORMAL.
Once the TV TYPE is set and memorized, it does not disappear by
turning the player to standby mode or completely off.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Selecting the Dolby Surround mode
To adjust the output balance of speakers
You can enjoy the surround sound with discs bearing the mark
*.
1. Set the Dolby Surround mode to any one of NORMAL, WIDE,
PHANTOM and 3 STEREO.
2. In stop mode, press the SUBTITLE button for two seconds or
longer on the player repeatedly until the following display
apears on the television screen.
Preparation
•
IfyoursystemisreadyfortheDolbyProLogic,maketheconnection
between the player and your amplifier/receiver correctly according
to “Basic connections” on page 2.
PROGRAMMED SONGS
•
Even if your audio system is for a normal stereo reproduction,
including a stereo amplifier/receiver and two speakers, you can
enjoy the pseudo-surround sound with 3D Phonic mode.
CENTER
/
SURROUND CH
LEVEL ADJUSTMENT
The channel from which the
test tone is output
TEST TONE
L
CH
CENTER
SURROND
CH
CH
0
0
Operation
Output level
To select the Dolby Surround mode, use the DOLBY SURROUND
button. Pressing this button cycles the modes as shown below.
(Television screen)
The test tone is output from speakers in the following order.
NORMAL
WIDE
(Pro Logic)
PHANTOM
(Pro Logic)
(Pro Logic)
Front-left
(L CH)
Center
(C CH)
Front-right
(R CH)
OFF
3D Phonic
3 STEREO
Rear
(S CH)
When any mode but OFF is selected, the DOLBY SURROUND
button lights.
See whether you hear the test tone from each speaker in the
same level at the listening position.
Select the mode depending on your system configuration.
3. If any adjustment is necessary, press the DOLBY SURROUND
button to select the channel (CENTER or SURROUND) to be
adjusted.
NORMAL (Pro Logic):
Selectthismodewhenthecenterspeakercannotreproducethe
bass better than the front speakers. The bass portions of the
center channel signals are output through the front speakers.
The selected channel turns yellow.
4. EachpressoftheUP(#)buttonontheplayerorremotecontrol
unit increases the output level up to +10 dB.
WIDE (Pro Logic):
Select this mode when the center speaker can reproduce the
bass better than the front speakers. All signals of the center
channel are output through the center speaker.
Each press of the DOWN ( ) button on the player or remote
control unit decreases the output level up to -10 dB.
5. Pressing the SUBTITLE button on the player or remote control
unit completes the adjustment.
PHANTOM (Pro Logic):
Select this mode when you do not use a center speaker. The
center speaker channel signals are output through the front
speakers.
Thesettingismemorizedandwillnotdisappeareveniftheplayerturns
to the standby mode or completely off.
When setting the Dolby Surround mode to PHANTOM, CENTER
cannot be adjusted.
3 STEREO:
Select this mode when a center speaker is connected without
rear speakers.
When setting the Dolby Surround mode to 3 STEREO, SURROUND
cannot be adjusted.
3D Phonic:
Select this mode when reproducing the surround sound with
only two front speakers. It gives you very realistic surround
effect as if the sound is reproduced through the Dolby Sur-
round decoder.
This mode is the result of research on sound localization
technology carried out at JVC for many years and make it
possible to reproduce the surround sound with only two front
speakers.
*
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic",
and the double-D symbol are trademarks of Dolby Laboratories.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Using the remote control
Using the SHIFT button on the remote
control unit
Presetting the remote control to operate
your own TV
You can control other functions with the remote control, simply by
pressingabuttonwhileholdingdowntheSHIFTbutton. Someofthese
functions are useful for Karaoke and Video CD playing, others for
You can use the player’s remote control unit to control some functions
on your TV set (e.g., turning the TV on and off, adjusting volume, or
selecting channels). First, though, you must preset the remote control
to make it compatible with your TV.
controlling the TV.
SHIFT
Operation
1. Check the Preset Code Table (page 12) to determine the two-
digit brand code number for your TV.
2. While holding down the TV/VIDEO button on the remote con-
trol, press the number keys to insert the two-digit brand code
number. (For example, if the code number is "28", press the
number key 2, then 8. If the first digit is a "0", press 10. Thus,
if the code number is "09", press the number key 10, then 9. If
the code number is "10", press the number key 1, then 10. If
it is "20", press the number key 2, then 10.)
7 SHIFT button functions to control the TV
SHIFT + VCD
/
⇒ Turns the TV on and off
SHIFT + A TIME ⇒ TV MUTE (Mute the TV sound)
SHIFT + 1 ⇒ TV Channel 1
Notes
•
Before the remote control unit leaves the factory, the brand code
number is set as No. 01 (JVC).
Depending on your television set’s age and other factors, brand
code numbers may be different from those shown in the table. In
such a case, try out other codes until you find one that corresponds
to your television.
SHIFT + 2 ⇒ TV Channel 2
•
•
•
•
SHIFT + 10 ⇒ TV Channel 0*
SHIFT + REPEAT ⇒ 1 - (The first digit of a TV Channel number 10
to 19. Push a number key to insert the second digit.)*
3. While still holding down the TV/VIDEO button, press the 7
SHIFT + SUBTITLE ⇒ 2 - (The first digit of a TV Channel number
20 to 29. Push a number key to insert the second digit.)*
(STOP) button on the remote control.
TV/VIDEO
SHIFT + +10 ⇒ -/- - (To change a one - digit or to change a two -
digit TV channel number, using a number key.)*
+
SHIFT + B. SEARCH ⇒ ENTER (Push after choosing a channel.
This function registers the channel you have chosen.)*
4. The TV is turned off if the code number is correct. Repeat the
procedure from the beginning if you weren’t successful the
first time.
Note
•
The asterisk * indicates that these operations do not work for some
manufacturers’ television sets.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Preset code table
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Television manufacturer
JVC
PANASONIC
SONY
SHARP
TOSHIBA/BEIJING/CHANGHONG
MITSUBISHI/CHANGHONG
HITACHI
SANYO
FUNAI
AIWA
DAEWOO
SAMSUNG
LG (GOLDSTAR)
THOMSON
FERGUSON
PHILIPS/TCL/CHANGHONG
GRUNDIG
ITT
MIVER
FINLUX
NOKIA
NEC
JINXING/PEONY1
PEONY2
PEONY3/CHANGHONG
KONKA
PEIJIN/NOBLEX
TCL
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Various functions to
enhance your enjoyment
To stop the program playback, press the 7 (STOP) button. Press-
Display of operations status
ing the 3 (PLAY)/SELECT button again causes the player to start
playing from the next programmed track.
Preparation
This function is controlled by the remote control.
or
Operation
Press the ON SCREEN button on the remote control. By pressing
the ON SCREEN button, the following information may be easily
and quickly displayed or removed from the television screen.
(Remote control)
Time, Echo effect, Key control, Program, Repeat, Random, Multiplex-
ing, Vocal effect, DOLBY SURROUND, Vocal replace, Bookmark, etc.
Canceling a programmed track
Operation
PROGRAMMED SONGS
2-1
1:30
Therearetwocancelingfunctions(cancelingthelastprogrammed
track and canceling the current track).
ON SCREEN
•
To cancel the last programmed track, press the CANCEL
button on the remote control and the last programmed track
will be canceled. This can be done both in playback and stop
modes.
(Remote control)
(Television screen)
PROGRAMMED SONGS
2-1
2-2
2-3
2-4
2-5
3-1
1-1
1-2
1-3
Programming the track sequence you want
The number located lowest is the
last track programmed.
Preparation
It is not possible to enter programming mode during play. If playing,
stop the player with the 7 (STOP) button.
(Television screen)
Operation
1. Press the PROGRAM button to enter the programming mode.
PROGRAM is displayed in the display window.
•
To cancel the current track (during playback):
* press the 7 (STOP) button to stop playback. The next press
of the 3 (PLAY)/SELECT button will start playback from the
next programmed track.
PROGRAM
PROGRAM
or
* press the ¢ button to skip to the next programmed track.
Note
To verify the tracks you programmed, stop the player and see ON
SCREEN information.
(Remote control)
•
2. Specify the disc by a CD (1-3) button and then the track by the
number keys. You can program up to nine tracks by repeating
this procedure.
3. To play the programmed tracks press the 3 (PLAY)/SELECT
button.
Clearing a program
To delete all programmed tracks you have entered, press the 7
(STOP) button and then the PROGRAM button while the player is
in stop mode. “PROG OFF” will be displayed on the television
screen.
Notes
•
The track number playing, next track programmed, and number of
programmed tracks are displayed from the left-top of the television
screen. You may use the ON SCREEN button to delete this
information.
PROGRAM
PROGRAM
or
•
•
Once the programmed track is played, it is deleted from the
program.
You may also program additional tracks during the program play-
back as long as the number of the programmed tracks does not
exceed nine.
(Remote control)
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
To cancel the random playback, press the RANDOM button again
Repeating tracks
after stopping the player.
RANDOM
It is possible to repeat playback of all discs or only a single track.
Preparation
This function is controlled by the remote control.
(Remote control)
Note
•
Operation
Random is not effective in program mode.
By pressing the REPEAT button on the Remote Control, REPEAT
modes are cycled as shown below.
REPEAT
Playing back a track from the desired time
→ All discs
You can play back a disc track from the desired time.
→ Current track
(Remote control)
(Display window)
Operation
While playing back the desired track, operate the following
procedures.
REPEAT ALL
(All discs)
REPEAT1
(1 track)
REPEAT OFF
1. Press the ATIME button on the remote control.
(Television screen)
ATIME
Notes
•
•
•
•
When playing a programmed sequence of tracks, only one track
repeat is available.
TheRepeatfunctionisnotavailablewhenaVideoCDorSVCDdisc
withPBCisinsertedandthePLAYMODEswitchissettoNORMAL.
Only REPEAT ALL is available when the player is in RANDOM
mode.
(Remote control)
2. Enter the desired time by pressing the corresponding number
keys from left to right digits.
“10” button is used for “0” entry.
You cannot repeat the segment between bookmarks.
1
2
3
4
5
6
7
1
5
9
2
6
3
7
4
8
Randomly playing tracks
8
or
Preparations
9
•
•
•
This function is controlled by the remote control.
This function plays tracks randomly from one disc.
This function is available while the player is in stop mode.
10
+10
10
+10
(Remote control)
Operation
Press the RANDOM button and random playing will start.
3. Press the 3 (PLAY)/SELECT button.
RANDOM
SELECT
or
(Remote control)
(Remote control)
(Display window)
The disc will start playback from the specified time.
To stop the random playback, press the 7 (STOP) button.
For example, if you want to play back the disc from “05m06s”,
press the following buttons.
ATIME → 5 → 10 → 6 → 3
or
Note
•
(Remote control)
Some discs may not be played back from the specified time
precisely.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Playing a multiplex sound CD
Viewing the VIDEO INTRO
This function is used for multiplex sound discs.
Preparation
See manuals attached to discs for detail information.
When you play a Video CD or SVCD with the Playback Control
function, the PLAY MODE switch should be set to PBC OFF.
Operation
By pressing the MPX button consecutively, channel multiplexing
modes are cycled as shown below.
Operation
1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the player or the remote
control just after starting disc play. Then, the player starts to
display in sequence the first several seconds and track num-
bers of all tracks on the disc.
MPX
MPX
or
VIDEO
INTRO
VIDEO INTRO
(Remote control)
or
NORMAL
(left-channel/
right-channel)
L-CH MONO
R-CH MONO
(Remote control)
3. To select a track during the video intro mode, press the
number key corresponding to the item number on the televi-
sion screen.
(Television screen)
When L-CH MONO or R-CH MONO is selected, the MPX button on
the player lights and the display indicates MPX L or MPX R
respectively.
VIDEO INTRO
1
4
7
2
5
8
3
6
9
* When playing back an SVCD;
STEREO 1
STEREO 2
MONO 1
MONO 2
MONO 4
MONO 3
(Television screen)
(Television screen)
Note
The Video intro function is not available in the Random mode.
•
WhenanyofMONO1through4isselected, theMPXbuttonlights.
Note
Programming during VIDEO INTRO
•
Note that you can hear no audible sound at the STEREO 2, MONO
3 and MONO 4 positions if no audio is recorded on STEREO 2.
Operation
1. Stop play.
2. Press the PROGRAM button so that PROGRAM is lit in the
display.
3. Press the disc button you want to play, and enter 1 on the
number keys.
4. Press the 3 (PLAY)/SELECT button and then, after the disc
has started to play, press the VIDEO INTRO button.
5. The player starts to display in sequence the first several
secondsandtracknumbersofalltracksonthedisc. Selectthe
numbers you want to program. You can program nine tracks.
6. Press the 3 (PLAY)/SELECT button to play.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Viewing the highlights
This function is used for a movie Video CD or SVCD.
Preparations
•
When you play a Video CD or SVCD with the Playback Control
function, the PLAY MODE switch should be set to PBC OFF.
This function is controlled by the remote control unit.
•
Operation
1. Start playing the track you want to see the highlights of.
2. After the track begins to play, press the HIGHLIGHT button on
the remote control.
HIGHLIGHT
HIGHLIGHT
1
4
7
2
5
8
3
6
9
(Remote control)
(Television screen)
3. To select one of the nine segments, press the number key (1
to 9) of the segment which you want to play.
The segment will start from several seconds before the shown
time below each segment.
Notes
•
•
•
The segments are each of nine equal-time divisions of the track.
Nine different highlights are displayed for one minute.
If no number key is pressed for a minute after the Highlight view
appears on the screen, the screen is replaced with the Highlight
view of the next track.
•
While in VIDEO INTRO or HIGHLIGHT, sometimes the image is
partiallydistorted. Thissymptomiscausedbynoiseinthediscitself
or incorrect manufacturing, not by a malfunction of the player.
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Playback with the
Bookmark function
Using the B. SEARCH button
Marking segments for later viewing with
the Bookmark function
7 With PBC off
1. Press the B. SEARCH button. The B. SEARCH light will flash
on and off, indicating the player is in the Bookmark Search
mode.
The Bookmark function lets you mark segments of a Video CD or
SVCD, sothatyoucanhavealmostinstantplaybackofdesiredscenes
later. You can mark segments on up to ten discs, with a maximum of
nine segments per disc.
B.SEARCH
BOOKMARK
or
Evenifyoutakethediscoutoftheplayer, itsbookmarkswillstaystored
for later use, until you erase them.
B.SEARCH
(Remote control)
Operation
While playing the disc, press the BOOKMARK button at the
segments you want to mark for later playing. Bookmark numbers
appear on the television screen and the BOOKMARK indicator on
the player flashes.
2. Press the number key (1 to 9) which corresponds to the
number of the segment where you want to start play. While
playing the disc, you can also use the 4 or ¢ button to
select the desired bookmark number.
B.MARK
Note
•
BOOKMARK
or
To exit the Bookmark Search mode and return to regular viewing,
press the B. SEARCH button again.
B.S
(Remote control)
7 With PBC on
Notes
1. PresstheB. SEARCHbuttontoenterBookmarkSearchmode.
If you press the button while playing, the player will stop and
then enter Bookmark Search mode.
•
•
The Bookmark function works only with Video CDs and SVCD.
The Bookmark function is most easily used when the player is in
PBC OFF mode.
•
WhenyoubeginmarkingsegmentsineitherNORMALorPBCOFF
mode, all subsequent markings and searches for that disc must be
done in the same mode.
B.SEARCH
BOOKMARK
or
B.SEARCH
(Remote control)
Using the BOOK DIGEST button
2. Press the number key (1 to 9) which corresponds to the
number of the segment where you want to start play.
1. Press the BOOK DIGEST button while playing the disc.
BOOK DIGEST
B.DIGEST
Note
•
or
The Bookmark Search function ends automatically, and the player
returns to regular viewing.
(Remote control)
2. The marked segments will be highlighted on the screen, with
their respective numbers (maximum of nine).
3. Press the number key (1 to 9) which corresponds to the
number of the segment where you want to start play.
1
2
3
4
5
6
7
8
9
10
+10
Note
The Bookmark Digest function is not available in PBC function.
•
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Canceling individual bookmarks
Canceling all bookmarks on individual
discs
7 Canceling bookmarks set in PBC OFF mode
[Method A]
7 Canceling bookmarks on a disc in the player
You can cancel bookmarks on the currently selected disc in the
player using the 8 (PAUSE)/STILL button on the player.
1. In PBC OFF mode, start playing the segment whose bookmark
you want to cancel.
2. Press the CANCEL button on the remote control unit. The
bookmarkforthesegmentimmediatelyprecedingthepartyou
are playing will be canceled.
In stop mode, press the 8 (PAUSE)/STILL button on the player
until bookmark information on the television screen stops
blinking.
CANCEL
PROGRAMMED SONGS
STILL
DISC: 1
BOOKMARK
CANCEL
(Remote control)
Note
•
When you cancel a bookmak number, all subsequent bookmark
numbers change, moving up one level to fill the gap you made.
(Television screen)
[Method B]
The total number of
discs with bookmarks
1. Start playing in NORMAL mode.
2. Press the CANCEL button on the remote control unit. The
bookmark with the highest number will be canceled (regard-
less of the playing position).
7 Canceling bookmarks on a disc which was played the earliest
You can cancel bookmarks on a disc you played the earliest
whether it is in the player or not.
CANCEL
In stop mode, press the 7 (STOP) button on the player until
bookmarkinformationonthetelevisionscreenstopsblinking.
(Remote control)
PROGRAMMED SONGS
DISC: 3
7 Canceling bookmarks set in NORMAL mode
BOOKMARK
CANCEL
1. Start playing in either NORMAL or PBC OFF mode.
2. Press the CANCEL button on the remote control unit. The
bookmark with the highest number will be canceled (regard-
less of the playing position).
CANCEL
(Television screen)
The total number of
discs with bookmarks
(Remote control)
Note
•
You can also cancel all bookmark information by setting the
POWER button to OFF.
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Using a microphone
Using a wired microphone
Adjusting music key
Operation
Press the KEY CONTROL buttons ( or #) to change the key in
which the music plays. To return the music to its original key,
press the NORMAL button.
UptothreemicrophonescanbeconnectedtotheMICjacksonthefront
panel.
You can also adjust the music using the remote control unit.
KEY CONTROL
DOWN
NORMAL
UP
KEY CONTROL
or
(Remote control)
MIC 1
MIC 2
MIC 3
Notes
•
The degree the key has been raised or lowered is displayed on the
television screen.
MIN
MAX
MIN
MAX
MIN
MAX
•
When the song ends, the key control will return to NORMAL mode
automatically.
1. Turn on the microphone switch.
2. Turn the MIC 1, MIC 2, and MIC 3 knobs clockwise (level up) or
counterclockwise (level down) as desired.
Adjusting echo effect
You can add echo to your voice.
Turn the DIGITAL ECHO knob clockwise (level up) or counter-
clockwise (level down) to adjust the echo effect as desired.
MIC 1
MIC 2
MIC 3
DIGITAL ECHO
MIN
MAX
MIN
MAX
MIN
MAX
ATTENTION
MIN
MAX
Whenyouarenotusingthemicrophone, settheMICswitchtoOFF.
Be sure to remove the microphone
NotewhenconnectingthesoundoutputtotheinputofaTVorVCR:
If an excessively strong signal is given to a unit through a micro-
phone, for example when using Karaoke, it may cause an adverse
effect such as distorted sound. Lower the sound volume using the
microphone control.
Karaoke etiquette
Think of your neighbors when you are enjoying karaoke music.
Particularly late at night, the sound you enjoy may reach your
neighborsmorethanyouexpect. Commonsenseandcourtesyare
always appreciated.
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Vocal replace
Preparation
This function is used for multiplex sound discs.
Operation
1. Press the V.REPLACE button during play or stop. REPLACE
will appear on the display window and VO.REPLACE will
appear on the television screen. When you start singing, the
disc vocal is removed and your voice is inserted into the
music.
V.REPLACE
(Remote control)
2. To cancel voice replacement, press the V.REPLACE button
again.
Note
•
You cannot use the Vocal replace function with a disc that has
vocals recorded on the left channel.
Vocal effect
By pressing the VOCAL EFFECT button, you can apply a vocal effect
to the microphone input signals. Three effect modes are available;
HARMONY, CHORUS and FLANGE. The selected mode is shown on
the television screen, while the VOCAL EFFECT button on the player
lights when any of the effect modes is selected.
V.EFFECT
VOCAL
EFFECT
or
(Remote control)
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF PLAYBACK CONTROL FUNCTION
Playing Video CDs and
SVCDs with Playback
Control function
This player provides a Playback Control function which utilizes a
procedure (menu selection) programmed in a Video CD or SVCD. The
playback operation procedure may differ depending on the disc you
use.
Operation
1. Verify that the PLAY MODE switch is set to NORMAL.
2. Press the CD (1 through 3) or 3 (PLAY)/SELECT button. The
playerstartsupthePBCfunction. “Pb”isshowninthedisplay
window. The main menu is displayed on the television screen.
The Playback Control function provides:
•
High-resolution still image display - Super-fine reproduction of still
images with more than four times the resolution of video tape.
Menu-driven playback - interactive menus for easy selection of
tracks.
CD3
SELECT
•
CD2
CD1
or
Preparations
•
A Video CD or SVCD with the Playback Control function is required
for this operation.
•
•
The PLAY MODE switch must be set to NORMAL.
The buttons used for operating the PBC function are the number
keys, the 4 / ¢ PREV/NEXT buttons, 3 (PLAY)/SELECT but-
ton, and
RETURN button.
2-PBC
PBC
1
2
3
4
Button functions
Number keys ............................ Select a specific menu item from the
(Including +10 button)
television screen or monitor.
4 /¢PREV/NEXTbuttons .... Move through menu etc.
3 (PLAY)/SELECT button ....... When “3” or “SELECT” is displayed
on the television screen, pressing
this button jumps to the specific pic-
ture.
(Television screen)
3. To move through the disc menus, press the 4 / ¢ PREV/
NEXT button.
PREV
NEXT
or
RETURN button ................ Returns to the menu.
7 (STOP) button ...................... Stops operations.
4. When the disc menu you want appears, select an item in the
menu by using the number keys. The numbers on the number
keys correspond to the menu item numbers.
5. To return to a menu press, the
RETURN button.
RETURN
Notes
•
•
•
•
Page numbers in the disc menu show that preceding pages exist.
To move from the current menu, press the 4 / ¢ PREV/NEXT
button.
If you have no desire to use the PBC function when playing a disc
withthePBCfunction,switchthePLAYMODEswitchto"PBCOFF"
before playing.
If you switch the mode from NORMAL to PBC OFF while playing
back a PBC disc, playback will stop. Operate the procedure above
again from the beginning.
If you press the number keys directly to select the track before
playing, you cannot enter PBC mode regardless of the PLAY
MODE switch setting.
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF PLAYBACK CONTROL FUNCTION
Video CDs and SVCDs with Playback
Control function
•
•
Menu-driven playback
You can interact with the screen using a menu display to select and
play an entry.
High-resolution still image display
You can display high-quality images four times clearer than moving
pictures.
What is Playback Control function?
The Playback Control function, allows you to enjoy menu-driven
operation and high-resolution still images which have a resolution four
times greater than moving pictures.
Example of playback using the Playback Control function
1
2
3
Menu screen
3
1
2
Press
RETURN.
1
2
3
Moving
picture
1
2
1
2
1
2
3
To next screen
Press
RETURN.
Moving
picture
Moving
picture
Moving
picture
Still
picture
Still
picture
Moving
picture
Moving
picture
Moving
picture
To previous screen
Press
RETURN.
3. When the selection menu is redisplayed after you have played
your selection, selecting a number again replays its contents.
(Some discs may show the menu screen several times.)
AselectionmenuisdisplayedwhenyoustartplayingaVideoCDand
SVCD disc with the Playback Control feature. The selection menu
shows a list of numbers for selection. Some discs may show moving
pictures or a divided screen.
When
and
are shown, pressing “NEXT” or “PREV” can
change the selection menu.
1. When a list of numbers is displayed, selecting a number shows its
contents.
4. After playback, press
screen.
RETURN to go back to the previous
To stop playback, press 7 (STOP).
2. When “3” or “SELECT” is displayed on the television screen,
pressing this button jumps to the specific picture.
Note
•
When a menu is displayed for a long time (about ten minutes), the
screen background automatically fades out to prevent screen
burn-in while the setting is suspended.
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
RESTRICTING USE OFYOUR DISCS
Locking a disc with the
Read-Protect function
Locking a disc
Canceling Read-Protect
TheRead-Protectfunctionrestrictsviewingofadisc. Onlypeoplewho
know the code can unlock the disc. You can lock only Video CDs and
SVCDs (up to ten discs).
Operation
1. Place the disc in a tray, then press the CD button (1 - 3) for that
tray. PROTECT is displayed on the television screen.
Notes
CD3
CD2
CD1
•
•
You cannot lock a disc while it is playing.
All Read-Protect operations are performed using buttons on the
player, not on the remote control.
Operation
1. Play the disc for a moment, then press the 7 (STOP) button.
2. Hold down the 4 PREV (Previous) button on the player for
more than three seconds. The indication “Loc” in the display
window will flicker for a moment.
PREV
2. Hold down the NEXT button on the player for at least three
seconds. Thetrackandtimenumbersarenolongerdisplayed.
NEXT
3. Press the number key “8” four times. You can now play the
disc.
1
2
3
4
5
6
7
8
3. Press the number key “8” four times. The display window
indicates “Loc.”
Now the disc cannot be viewed. You can open and close the tray and
you can turn the player power on and off, but no other functions are
available for this locked disc.
9
10
+10
Note
•
PROTECT is displayed on the television screen.
Releasing the Read-Protect temporarily
Cut out the following instructions and keep them separately, to
ensure privacy.
Operation
1. As above, hold down the 4 PREV (Previous) button on the
player for at least three seconds. The indication “Loc” in the
display window will flicker for a moment.
PREV
2. Press the number key “7” four times. You can now play the
disc temporarily until you press the 0 (OPEN/CLOSE) button
for that disc, or until you play another disc. Turning off the
player does not restore the Read Protect function.
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL AUDIO CDs
Playing Digital Audio CDs
Playing Digital Audio CDs
Basically, the operations for Video CDs and SVCDs apply to the Audio
CDs except for some video-related functions.
Notes
•
•
The display has no indicator to show disc type.
The PLAY MODE switch is ineffective for Audio CDs.
Unavailable functions for Audio CDs
ThefollowingfunctionsforVideoCDandSVCDdiscsarenotavailable
with Audio CDs.
•
•
•
•
•
Slow-motion playback
Frame-by-frame function
Video intro function
Highlight function
Bookmark function
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK REMOTE CONTROL SYSTEM
AV COMPU LINK remote
control system
When you are going to enjoy a disc, you usually have to turn on your
television, receiverandVideoCDplayerandsetupthesecomponents’
individually. If, however, the system consists of components which
support JVC’s AV COMPU LINK remote control system, instead of
individual setup, simply pressing the 3 (PLAY)/SELECT button allows
you to enjoy the disc.
If you connect the Video CD player to a television and VCR via AV
COMPU LINK as illustrated above, set the VCR’s Remote Control
Code and Video CD player’s AV COMPU LINK setting as follows.
• When connecting with VIDEO 1 input terminal of the television:
Video CD player’s AV COMPU LINK setting: CD 2
VCR’s Remote Control Code:
B
• When connecting with VIDEO 2 input terminal of the television:
Video CD player’s AV COMPU LINK setting: CD 3
Connection and setup
VCR’s Remote Control Code:
A
Using the AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
After the connection is done, make the player’s AV COMPU LINK
setting by the following procedures.
TV
1. While the player is in the STANDBY mode, hold down the 7
/
(STOP) button and press the
(STANDBY/ON) button.
Receiver
Video CD player
The corresponding CD button (CD1 to CD3) of the selected AV
COMPU LINK setting blinks.
If you connect the Video CD player to a television and receiver via AV
COMPU LINK as illustrated above, set the Video CD player’s AV
COMPU LINK setting to CD1.
2. To change the selection, press the 3 (PLAY)/SELECT button.
Each press of the button cycles the selection as shown below.
CD 1
CD 2
CD 3
Operation
You can enjoy pictures and/or sound by just putting the Video CD
player into play mode. You do not have to operate the TV and/or
receiver including power switching.
3. To exit the setting mode, press the 7 (STOP) button to return
/
totheSTANDBYmode,orpressthe
to enter the ON mode.
(STANDBY/ON)button
Preparation
Set the POWER switch of each component to ON.
To AV COMPU LINK (II or EX)
1. Insert a disc into the Video CD player.
2. Press 3 (PLAY)/SELECT of the Video CD player.
SELECT
TV
Video CD player
If you connect the Video CD player to a television via AV COMPU LINK
as illustrated above, set the Video CD player’s AV COMPU LINK
setting as follows.
The following actions are performed automatically:
• Turning on the power of each component.
• Setting the source of the television to the external input which the
Video CD player is connected to.
• When connecting with VIDEO 1 input terminal of the television:
CD 2
• Setting the source of the receiver to the Video CD player.
• When connecting with VIDEO 2 input terminal of the television:
CD 3
To AV COMPU LINK
(II or EX)
Notes for connection
To AV COMPU LINK
• Connect the AUDIO OUT jacks of the Video CD player to the audio
input jacks of a receiver which show “DVD”. Otherwise, the system
will not work correctly.
• TheremaybenodescriptionaboutconnectionstoaVideoCDplayer
in the instruction manual of a television or VCR. But a television or
VCR with AV COMPU LINK terminals which show II can be con-
nected to a Video CD player.
TV
Video CD player
Video cassette recorder
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Main specifications
XL-MV7000GD
Accessories
AC power cord ........................................................................... 1
Audio video cable....................................................................... 1
Remote control unit (RM-SXLMV777U) ..................................... 1
Batteries (R6P(SUM-3)/AA(15F)) ......................................... 2
AC plug adaptor (except People's Republic of China) ............... 1
AV COMPU LINK cable ............................................................. 1
Model
Video CD player
Playback disc Super VCD
Video CD
Digital Audio CD
Front panel
color
XL-MV7000GD
Gold
Total harmonic
distortion
0.01% (1 kHz)
90 dB
S/N ratio
Frequency
response
20 Hz – 20 kHz
Input terminal Microphone
5 mV (5.0kΩ)
Output
terminal
Line output
2.0 Vrms (full scale)
1.0 Vp-p (75Ω)
Video output (composite)
S video output
Y: Illuminance
C: Chrominance. burst 0.286 Vp-p (75Ω)
1.0 Vp-p (75Ω)
Echoing
Digital echoing
AC 115-127/220-240 V
Selectable with the voltage selector
16 watts
6 watts
Power
requirements
50/60 Hz
Power
consumption
In standby mode
5.3 kg (11.7 lbs)
Weight
Dimensions
(W/H/D)
435 x 126.5 x 325.3 mm
17-3/16 x 5 x 12-13/16 inches
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Troubleshooting
What appears to be a malfunction may not always be so. Please go through the following list before requesting service.
Symptom
Possible cause
Power plug is disconnected from AC outlet.
The POWER button is in the OFF position.
Batteries are exhausted.
Remedy
Power does not come on.
Firmly connect the plug to AC outlet.
Depress the POWER button.
Remote control does not work.
Replace the batteries with new ones.
The tip of the remote control unit is not pointed at the Use the remote control correctly.
receiving part of the player.
No image is displayed on the
monitor.
The video cable is not connected.
The TV is not set in video mode.
An incompatible disc is loaded.
No disc is loaded.
Firmly connect the cable.
Set the TV in video mode.
Load a disc compatible with the player.
Load a disc.
Playback does not start.
Disc is loaded upside down.
Audio cable is not connected.
Operation of the external amplifier is incorrect.
Disc is dirty.
Reload the disc with the label up.
Firmly connect the cable.
Speaker does not produce
sound.
Operate the amplifier correctly.
Wipe the disc surface with a soft cloth.
Correctly connect cables. See page 2.
Sound is distorted or noise is
generated.
Image is garbled.
Connection is wrong.
Sound is intermittent.
Image is garbled.
Disk is dirty.
Wipe the disc surface with a soft cloth.
See page 1.
Disc is scratched.
Replace the disc with a new one.
Disc is warped.
Disc tray does not come out
when 0 (OPEN/CLOSE) button
is pressed.
Power plug is disconnected from the power outlet.
Firmly insert the plug into the outlet.
Operation is not possible.
Microcomputer malfunctions due to lightning or static Turn the power off, then on again.
electricity.
The AV COMPU LINK system
does not work correctly.
The player's AV COMPU LINK setting is not correct.
Make the setting correctly.
The malfunction may be caused by a device other than the player. Check other devices connected to the player.
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
AC Power Line Instructions (not applicable for Europe, U.S.A., Canada,
Australia and U.K.)
IMPORTANT
BEFORE PLUGGING IN, check that your AC power line
voltage corresponds with the position of the voltage
selector switch provided on the outside of this equipment.
If different, reset the voltage selector switch, to prevent
damage or risk of fire/electric shock.
1299RIMMACJSC
EN, CH
J
C
V
VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|