Compact 2-Way Loudspeaker
with 1 x 12" LF
AC2212/00
Key Features:
᭤
᭤
100° x 100° Coverage.
PT™ Progressive Transition™
Waveguide for good pattern control
with low distortion.
᭤
᭤
᭤
Bi-Amp/Passive Switchable.
Optional U-Bracket for easy installation.
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
᭤
᭤
᭤
᭤
᭤
᭤
᭤
᭤
Lecture halls
Houses of worship
Specifications:
Corporate learning centers
Small performing arts facilities
Theatrical sound design
Auditoriums
System:
1
Frequency Range (-10 dB): 50 Hz – 19 kHz
Frequency Response ( 3 dB): 55 Hz – 17 kHz
1
Coverage Pattern: 100° x 100°
Directivity Factor (Q): 7.1
Directivity Index (DI): 8.5 dB
Sports facilities
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes : 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz
Transducer Power Rating (AES) : LF: 300 W (1200 W peak), 2 hrs
2
Themed entertainment venues
AC2212/00 is a compact 2-way full-
3
250 W (1000 W peak), 100 hrs
HF: 50 W (200 W peak), 2 hrs
range loudspeaker system comprised of
one 300 mm (12 in) low frequency
driver and one 38 mm (1.5 in) exit/
44 mm (1.75 in) voice-coil compression
driver. The PT Progressive Transition
waveguide provides wide 100° by 100°
coverage. High-slope passive crossovers
minimize band overlap.
4
Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs
5
Maximum SPL : Bi-amp mode:
LF: 120 dB-SPL cont avg (126 dB peak)
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
6
System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket, as well as pre-engineered
array bracketry is available for easy
installation. Four threaded inserts locat-
ed on back of the enclosure allow
attachment of an Omnimount™ or
similar mounting bracket.
6
Sensitivity (1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: JBL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver,
44 mm (1.75 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
AC2212/00 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware. 4 x M6 on rear for Omnimount™ 100 Series
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
®
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 19.1 kg (42 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-4
Optional planar array frame kit. See AE Series Bracket Guide
1
Bi-amp mode, with recommended active tuning.
2
3
Resultant engineered acoustical response of crossover network and components.
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
4
5
6
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
are an expression of that philosophy.
᭤ AC2215/64 Compact 2-Way Loudspeaker with 1 x 15" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2215/64 Compact 2-Way Loudspeaker with 1 x 15" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2215/64
CRP 10M
7/02
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact 2-Way Loudspeaker
with 1 x 15" LF
AC2215/00
Key Features:
᭤
᭤
100° x 100° Coverage.
PT™ Progressive Transition™
Waveguide for good pattern control
with low distortion.
᭤
᭤
Bi-Amp/Passive Switchable.
Optional U-Bracket for easy installation
(see AE Series Bracket Guide).
Applications:
᭤
᭤
᭤
᭤
᭤
᭤
Small performing arts facilities
Houses of worship
Theatrical sound design
Auditoriums
Specifications:
System:
Sports facilities
1
Frequency Range (-10 dB): 42 Hz – 19 kHz
Frequency Response ( 3 dB): 50 Hz – 17 kHz
1
Themed entertainment venues
AC2215/00 is a compact 2-way full-
Coverage Pattern: 100° x 100°
Directivity Factor (Q): 7.1
range loudspeaker system comprised of
one 380 mm (15 in) low frequency
driver and one 38 mm (1.5 in) exit/
44 mm (1.75 in) voice-coil compression
driver. The PT Progressive Transition
waveguide provides wide 100° by 100°
coverage. High-slope passive crossovers
minimize band overlap.
Directivity Index (DI): 8.5 dB
Crossover Modes: Bi-amp/Passive switchable
2
Passive Crossover Slopes : 4th order (24 dB/oct) Butterworth HP & LP, 1300 Hz
3
Transducer Power Rating (AES) : LF: 275 W (1100 W peak), 2 hrs
250 W (1000 W peak), 100 hrs
HF: 50 W (200 W peak), 2 hrs
Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs
4
5
Maximum SPL : Bi-amp mode:
LF: 121 dB-SPL cont avg (127 dB peak)
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket is available for easy
installation.
121 dB-SPL cont avg (127 dB peak)
System Sensitivity (1W @ 1m): Passive mode: 97 dB SPL
6
Transducers:
Low Frequency Driver: 1 x JBL M115-8A 380 mm (15 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m, within operational band): 97 dB SPL
High Frequency Driver: JBL 2418H-1/MTA, 44 mm (1.75 in) voice coil
AC2215/00 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
6
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
®
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 637 x 422 x 504 mm
(25.1 x 16.6 x 19.9 in)
Net Weight: 25.0 kg (55 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-2
Bi-amp mode, with recommended active tuning.
Resultant engineered acoustical response of crossover network and components.
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
1
2
3
4
5
6
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2215/00 Compact 2-Way Loudspeaker with 1 x 15" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2215/00 Compact 2-Way Loudspeaker with 1 x 15" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2215/00
CRP 10M
7/02
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact 2-Way Loudspeaker
with 1 x 12" LF
AC2212/95
Key Features:
᭤
᭤
90° x 50° Coverage.
PT™ Progressive Transition™
Waveguide for good pattern control
with low distortion.
᭤
᭤
᭤
Bi-Amp/Passive Switchable.
Optional U-Bracket for easy installation.
Optional planar array frame kit
(see AE Series Bracket Guide).
Applications:
᭤
᭤
᭤
᭤
᭤
᭤
᭤
᭤
᭤
Lecture halls
Houses of worship
Specifications:
Corporate learning centers
Small performing arts facilities
Theatrical sound design
Auditoriums
System:
1
Frequency Range (-10 dB): 50 Hz – 19 kHz
Frequency Response ( 3 dB): 55 Hz – 17 kHz
1
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 8.9
Directivity Index (DI): 9.5 dB
Sports facilities
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes : 3rd order (18 dB/oct) Butterworth HP & LP, 1700 Hz
Transducer Power Rating (AES) : LF: 300 W (1100 W peak), 2 hrs
2
Themed entertainment venues
Delay/fill locations of larger systems
AC2212/95 is a compact 2-way full-
3
250 W (1000 W peak), 100 hrs
HF: 30 W (120 W peak), 2 hrs
4
Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs
range loudspeaker system comprised of
one 300 mm (12 in) low frequency
driver and one 25 mm (1 in) voice-coil
compression driver. The PT Progressive
Transition waveguide provides 90° by
50° coverage. High-slope passive
crossovers minimize band overlap and
well-controlled off-axis response
enhances arrayability.
5
Maximum SPL : Bi-amp mode:
LF: 120 dB-SPL cont avg (126 dB peak)
HF: 127 dB-SPL cont avg (133 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
6
System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: JBL 2412H compression driver, 25 mm (1 in) voice coil
6
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket, as well as pre-engineered
array bracketry is available for easy
installation. Four threaded inserts locat-
ed on back of the enclosure allow
attachment of an Omnimount™ or
similar mounting bracket.
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m): 112 dB SPL
Waveguide: PT-F95HF-1
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware. 4 x M5 on rear for Omnimount™ 100 Series
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
AC2212/95 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
®
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 17.3 kg (38 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-4
Optional planar array frame kit. See AE Series Bracket Guide
1
Bi-amp mode, with recommended active tuning.
2
3
Resultant engineered acoustical response of crossover network and components.
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
4
5
6
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2212/95 Compact 2-Way Loudspeaker with 1 x 12" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2212/95 Compact 2-Way Loudspeaker with 1 x 12" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2212/95
CRP 10M
7/02
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact 2-Way Loudspeaker
with 1 x 12" LF
AC2212/64
Key Features:
᭤
᭤
60° x 40° Coverage.
PT™ Progressive Transition™
Waveguide for good pattern control
with low distortion.
᭤
᭤
᭤
Bi-Amp/Passive Switchable.
Optional U-Bracket for easy installation.
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
᭤
᭤
᭤
᭤
᭤
᭤
᭤
᭤
᭤
Lecture Halls
Houses of worship
Specifications:
Corporate learning centers
Small performing arts facilities
Theatrical sound design
Auditoriums
System:
1
Frequency Range (-10 dB): 50 Hz – 19 kHz
Frequency Response ( 3 dB): 55 Hz – 17 kHz
1
Coverage Pattern: 60° x 40°
Directivity Factor (Q): 17.8
Directivity Index (DI): 12.5 dB
Crossover Modes: Bi-amp/Passive switchable
Sports factilities
2
Themed entertainment venues
Delay/fill locations of larger systems
AC2212/64 is a compact 2-way full-
Passive Crossover Slopes : 3rd order (18 dB/oct) Transitional HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 300 W (1100 W peak), 2 hrs
3
250 W (1000 W peak), 100 hrs
HF: 30 W (120 W peak), 2 hrs
4
Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs
range loudspeaker system comprised of
one 300 mm (12 in) low frequency
driver and one 38 mm (1.5 in) exit/
25 mm (1 in) voice-coil compression
driver. The PT Progressive Transition
waveguide provides 60° by 40° cover-
age in vertical cabinet orientation.
High-slope passive crossovers minimize
band overlap and well-controlled off-
axis response enhances arrayability.
5
Maximum SPL : Bi-amp mode:
LF: 120 dB-SPL cont avg (126 dB peak)
HF: 129 dB-SPL cont avg (135 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
6
System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
6
Sensitivity (1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: JBL 2412H/MTA, 38 mm (1.5 in) exit compression driver, 25 mm
(1 in) voice coil
Nominal Impedance: 8 ohms
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket, as well as pre-engineered
array bracketry is available for easy
installation. Four threaded inserts locat-
ed on back of the enclosure allow
attachment of an Omnimount™ or
similar mounting bracket.
Sensitivity (1W @ 1m): 114 dB SPL
Waveguide: PT-F64HF
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware plus 4 M5 on rear for Omnimount™ 100 Series
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
AC2212/64 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
®
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 18.1 kg (40 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-4
Optional planar array frame kit. See AE Series Bracket Guide
1
Bi-amp mode, with recommended active tuning.
2
3
Resultant engineered acoustical response of crossover network and components.
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
4
5
6
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
are an expression of that philosophy.
᭤ AC2212/64 Compact 2-Way Loudspeaker with 1 x 12" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2212/64 Compact 2-Way Loudspeaker with 1 x 12" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2212/64
CRP 10M
7/02
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact 2-Way Loudspeaker
with 1 x 15" LF
AC2215/95
Key Features:
᭤
᭤
90° x 50° Coverage.
PT™ Progressive Transition™
Waveguide for excellent pattern control
with low distortion.
᭤
᭤
Bi-Amp/Passive Switchable.
Optional U-Bracket for easy installation
(see AE Series Bracket Guide).
Applications:
᭤
᭤
᭤
᭤
᭤
᭤
᭤
Small performing arts facilities
Houses of worship
Theatrical sound design
Auditoriums
Specifications:
System:
Sports facilities
1
Frequency Range (-10 dB): 42 Hz – 19 kHz
Frequency Response ( 3 dB): 50 Hz – 17 kHz
1
Themed entertainment venues
Delay/fill locations of larger systems
AC2215/95 is a compact 2-way full-
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 8.9
Directivity Index (DI): 9.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes : 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.2 kHz
Transducer Power Rating (AES) : LF: 275 W (1100 W peak), 2 hrs
range loudspeaker system comprised of
one 380 mm (15 in) low frequency
driver and one 38 mm (1.5 in) exit/
25 mm (1 in) voice-coil compression
driver. The PT Progressive Transition
waveguide provides 90° by 50° cover-
age. High-slope passive crossovers min-
imize band overlap and well-controlled
off-axis response enhances arrayability.
2
3
250 W (1000 W peak), 100 hrs
HF: 30 W (120 W peak), 2 hrs
4
Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs
5
Maximum SPL : Bi-amp mode:
LF: 121 dB-SPL cont avg (127 dB peak)
HF: 127 dB-SPL cont avg (133 dB peak)
Passive mode:
121 dB-SPL cont avg (127 dB peak)
6
System Sensitivity (1W @ 1m): Passive mode: 97 dB SPL
Transducers:
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket is available for easy
installation.
Low Frequency Driver: 1 x JBL M115-8A 380 mm (15 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
6
Sensitivity (1W @ 1m, within operational band): 97 dB SPL
High Frequency Driver: JBL 2412H compression driver, 25 mm (1 in) voice coil
AC2215/95 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 112 dB SPL
Waveguide: PT-F95HF-1
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm exterior grade
11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
®
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 637 x 422 x 504 mm
(25.1 x 16.6 x 19.9 in)
Net Weight: 23.6 kg (52 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-2
Bi-amp mode, with recommended active tuning.
Resultant engineered acoustical response of crossover network and components.
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
Calculated based on power rating and sensitivity, exclusive of power compression.
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
1
2
3
4
5
6
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2215/95 Compact 2-Way Loudspeaker with 1 x 15" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2215/95 Compact 2-Way Loudspeaker with 1 x 15" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2215/95
CRP 10M
7/02
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2212/00 Compact 2-Way Loudspeaker with 1 x 12" LF
Beamwidth
Horizontal Off-Axis Frequency Response
Directivity Index, Q
Vertical Up Off-Axis Frequency Response
Dimensions
Dimensions in mm (in)
Vertical Down Off-Axis Frequency Response
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal 1/3 Octave Polars
Download from Www.Somanuals.com. All Manuals Search And Download.
᭤ AC2212/00 Compact 2-Way Loudspeaker with 1 x 12" LF
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS AC2212/00
CRP 10M
7/03
A Harman International Company
© Copyright 2002 JBL Professional
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Insignia Flat Panel Television NS F27C User Manual
IOGear Network Card GHE135U User Manual
JBL Car Speaker GTO507C User Manual
Jet Tools Lathe JWL 1236 User Manual
JVC MP3 Player RC EZ35S User Manual
JVC Remote Starter TH A35 User Manual
Kawasaki Cordless Saw 840328 User Manual
KitchenAid Cooktop ICS300RQ02 User Manual
KitchenAid Garbage Disposal KCDS100T0 User Manual
Koolatron Cooktop TCIS11BN User Manual