MPR Tray Assem bly Kit - Model 6905A
Assembly, Installation and Operating Instructions
Kit No. 1108705, 1069956
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Carrier/Dealer for further instruction.
SA FETY SUMMA RY
To ensure the safe installation, operation and use of the MPR Tray Assem bly
Kit, these instructions MUST be followed:
GEN ERA L WA RN IN G
DO NOT install or use this equipment without first reading and understanding
these instructions. If you are unable to understand the W arnings, Cautions or
Instructions, contact a healthcare professional, dealer or technical personnel before
attempting to install this equipment - otherwise injury or damage may occur.
IN STA LLA TION WA RN IN G
After ANY adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
MPR Tray Assembly Kit (Part No. 1108705) contains the following items:
DESCRIPTION
QUANTITY
Tray*
1
1
1
4
8
2
Pivot Arm
Support Arm
Tray Tab
Flange Screw
Dome Plug
*Tray (Part No. 1069956) can also be ordered separately.
REPLA CIN G TH E TRA Y - MODEL 6 9 0 5 A (FIGURE 1 )
1. Remove tray from recliner. Refer to STORING/REMOVING THE TRAY in the
Owner’s Manual, part number 54000M107.
2. Position tray assembly on the floor as shown in FIGURE 1.
3. Remove the four (4) flange screws and two (2) tray tabs that secure the support arm
to the tray.
4. Remove the four (4) flange screws and two (2) tray tabs that secure the pivot arm to
the tray.
5. Remove existing tray.
NOTE: Retain ALL mounting hardware and arms if only installing new Tray, part number 1069956.
For m ore inform ation regarding Invacare products, parts, and services,
Part No. 1123847
1
MPR Tray Assem bly Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
|