iSPAN® 4532 PMC
ATM over OC-3c/STM-1
Communications Controller
Industry’s first intelligent OC-3/STM-1 card features the Interphase
“gateway-on-a-card” technology for bridging ATM and Ethernet net-
works.
APPLICATIONS
FEATURES
3G Wireless BSCs/RNCs and BTSs/Node Bs
Broadband Optical Networks
Broadband Access
Routers
PDSNs
Voice over ATM
Softswitches
SGSNs (Wireless Gateways)
GGSNs
Motorola MPC8260A
(PowerQUICC IITM) on-board
processor @ 300 MHz
“Gateway-on-a-card”
technology enables interworking
of ATM and Ethernet protocols
for seamlessly bridging
dissimilar networks
Connects directly to SONET/SDH
facilities with no additional
line termination equipment
necessary
The iSPAN® 4532 PMC ATM Over OC-3/STM-1
Communications Controller is designed for carrier-
class telecommunication networks supporting
the most demanding ATM applications including
broadband Internet access, second and third
generation wireless, ‘converged’ next generation
networks (i.e. softswitch environments), and
integrated voice and data over carrier and
enterprise ATM backbones. Its support for ATM
to Ethernet interworking capability provides
telco system OEMs with a gateway-on-a-card
solution for bridging dissimilar technologies. This
capability allows carriers to cost-effectively migrate
existing communications infrastructure to newer
technologies and enables future-proofing of new
equipment deployments.
This ready-to-use, intelligent OC-3/STM-1 ATM line
interface is fully standards-compliant and features
software development tools to facilitate immediate
integration into CompactPCI®, VME, or custom
telecommunications platforms. In addition, the 4532
allows direct connection to SONET or SDH facilities,
eliminating the need for additional line termination
equipment. Featuring a powerful MPC8260A
on-board RISC processor, high performance
architecture, and advanced ATM functionality, the
4532 is the industry’s best choice for a 155 Mbps
PMC I/O solution in high-availability servers driving
next-generation wireless, convergence, and
broadband access telecom applications.
Supports up to 64,000
simultaneous Virtual
Connections (VCs)
Single software selectable OC-
3/STM-1 interface (front or rear
access)
Single Fast Ethernet interface
(front access)
Telecom clock management,
master or slave synchronization
modes
Slave UTOPIA2 bus on P3
connector allows for extending
ATM services to other modules
ATM protocol support for VBR,
CBR, and UBR Quality of Service
classes
Support for ATM AAL0, AAL2,
and AAL5 Adaptation Layers
Support for ATM layer
functionality: UPC (policing)
traffic shaping, per VC queuing
Modular PMC form factor
suits CompactPCI, VME,
and proprietary platform
architectures
03/02/05
Pre-integrated protocol stacks
available using Interphase lower
layers and various 3rd party
upper layer stacks
interphase.com
1.800.FASTNET
iSPAN 4532 PMC ATM over OC-3c/STM-1 Communications Controller
Download from Www.Somanuals.com. All Manuals Search And Download.
4532 Hardware
Powerful Features for Next-Generation Telecom Applications
4532 Architecture
• Support for SONET and SDH overhead channels, including
facility Data Link channels, alarms and indications, error and
performance monitoring; connects directly to SONET/SDH
facilities
• One Fast Ethernet interface on the front panel for remote boot or
LAN capability with 10/100 Base-T transceiver
The iSPAN 4532 PMC ATM Over OC3/STM-1 Communications
Controller is a member of the Interphase line of MPC8260A-based
controllers for carrier-class telecommunications environments.
The software selectable interface for SONET OC-3c or SDH STM-1
makes the 4532 a universal interface module and enables maximum
flexibility to support multiple international standard variants with
just one board.
• One front access RS-232 TTY port provided on a 2.5 mm stereo
jack
The 64-bit, 66 MHz 60x data bus connects the core RISC CPU to
the 64-bit wide SDRAM memory and the local side of the Tundra
PowerSpan PCI bridge. I/O transfers across the bridge to the PCI
bus are executed at 32-bits, 33 MHz or 66 MHz. Also connected to
the 60x data bus is an 16-bit 8 MB downloadable Flash memory (4
MB of 8-bit Flash on original 4532 models) that can be used to store
boot code and operational firmware.
• Optional JTAG debug port
Optional Rear Access via PCI Interface Module (PIM)
• Standard PCI Interface Module (PIM) design
• Single OC-3/STM-1 interface supporting long range single-mode,
intermediate range single-mode, and short-range multimode fiber
interfaces available (see above)
The MPC8260A CPM co-processor interfaces to the SONET/
SDH ATM framer via a master UTOPIA bus interface, which in
turn connects to the optical transceiver that connects to the
transmission line. The MPC8260A CPM performs all ATM layer
functions, including ATM layer, and up to the Common Part
Convergence Sublayer (CPCS) AAL functionality. The CPM has
separate and unimpeded access to a second block of 8 MB of
SDRAM memory, which can be used for storing virtual connection
lookup tables and traffic descriptors.
A second slave-mode UTOPIA interface from the 8260A CPM
coprocessor is available to a carrier card via the PMC P3 connector,
and can carry ATM traffic to and from the carrier card. In this
mode, the 4532 can be used as the front-end to an ATM switch as a
peripheral I/O card. Furthermore, the 8260A core RISC CPU can be
disabled, in which case the 4532 utilizes the CPM co-processor and
the ATM framer only to act as the physical I/O interconnect to an
ATM link.
• Designed for use with any VITA 36-199x PIM-compatible Rear
Transition Module (RTM)
PCI Interface
• 32-bit, 33 MHz or 66 MHz PCI interface on P1 & P2 connectors
2
• PCI 2.2 master/target bus interface with I O messaging unit and
four linked list DMA
• 32-bit DMA exchanges for high-transfer performance
Telecom Clock Management
• The line interface can be configured in LT (clock slave) or NT
(clock master) mode.
• Three line synchronization sources:
• Free running internal clock
• Recovered clock (loop back timing)
• Network reference (via P3)
• The recovered line clock is available to the carrier board via the
P3 connector.
Processor/Memory
• PowerQUICC II (MPC8260A) 64-bit RISC processor allows full
support of various communications protocols, reducing host CPU
processing
Tech Specs
Architecture
• Dual bus architecture: 64-bit 60x bus and 32-bit local
CPM bus
• 300 MHz core, 200 MHz CPM, 570 MIPs CPU
• 128 MB 64-bit SDRAM memory
Bus Type
PMC (PCI 2.2 Compliant)
32-bit, 33/66 MHz
IEEE 1275
Bus Data Transfer
Open Boot Interface
Memory
128 MB SDRAM
• 8 MB downloadable 16-bit Flash memory
• 8 MB 32-bit Connection Memory
Mechanical
Length
Width
149 mm (5.86 in.)
74 mm (2.9 in.)
Board Operational, Link active
Interfaces
• One front access or rear access software selectable OC-3/STM-1
interface (rear access via PCI Interface Module (PIM))
Indicators
• Long-range single-mode, intermediate-range single-mode and
short-range multi-mode fiber interfaces available:
• Long-range single-mode fiber: Up to 24.85 miles/40 km
• Intermediate-range single-mode fiber: Up to 12.4 miles/20 km
• Short-range multimode fiber: Up to 1.24 miles/2 km
Operating Environment
Power Dissipation
Temperature
5 V: 0.4 A, 3.3 V: 1.7 A
0 to 55 ˚C (32 to 131 ˚F)
–40 to 80 ˚C (–40 to 176 ˚F)
5% to 95% non-condensing
0 to 15,000 ft.
Storage Range
Relative Humidity
Altitude
• ATM over WAN SONET framer supports direct connection to long
haul optical network
interphase.com
1.800.FASTNET
iSPAN 4532 PMC ATM over OC-3c/STM-1 Communications Controller
Download from Www.Somanuals.com. All Manuals Search And Download.
iSPAN 4532 PMC ATM over OC-3c/STM-1
Communications Controller
CONTACT INFORMATION
Configuration Options
E-mail: [email protected]
The following configurations have MPC8260A @ 300 MHz, 128 MB SDRAM, and front access ports:
CONFIGURATION
4532-029
DESCRIPTION
Corporate Headquarters
Parkway Centre 1
Single-mode fiber
2901 N. Dallas Parkway. Suite 200
Plano, Texas 75093
4532-030
Intermediate-range single-mode fiber
Multimode fiber
4532-031
1-800-FASTNET
Phone: + 1.214.654.5000
Fax: + 1.214.654.5500
4532-032
Single-mode fiber, JTAG
Intermediate-range single-mode fiber, JTAG
Multimode fiber, JTAG
4532-033
4532-034
European Headquarters
Centre d’affaires 10ème Avenue
855, avenue Roger Salengro
92370 Chaville - France
Tél.: + 33 (0) 1 41 15 44 00
Fax: + 33 (0) 1 41 15 12 13
The following configurations have MPC8260A @ 300 MHz, 128 MB SDRAM, and rear access ports (requires
3032 PIM):
CONFIGURATION
4532-035
DESCRIPTION
Rear Access (requires 3032 PIM)
Rear Access (requires 3032 PIM), JTAG
4532-036
Asia/Pacific Rim Headquarters
27 Brallas Avenue
St. Ives NSW 2075
Australia
Tel: +612 9440 2140
Fax: +612 9440 2141
The following configurations are PCI Interface Modules (PIMs):
CONFIGURATION
3032-000
DESCRIPTION
Long-range single-mode fiber
Intermediate-range single-mode fiber
Short-range multimode fiber
3032-001
3032-002
© 2000–2005 Interphase®, FibreView®, iWARE®, iSPAN®, iNAV®,
“Designed to Perform. Designed to Last.®”, and the Interphase
logo are registered trademarks, (i)chip™, SynWatch™,
ENTIA™, PowerSAN™, and SlotOptomizer™ are trademarks of
Interphase Corporation.
All other trademarks are the property of their respective
manufacturers.
Specifications and features subject to change without notice.
Notes
interphase.com
1.800.FASTNET
iSPAN 4532 PMC ATM over OC-3c/STM-1 Communications Controller
Download from Www.Somanuals.com. All Manuals Search And Download.
|