Insignia Indoor Furnishings NS 3IN1MT50C User Manual

USER GUIDE  
Wood Finish and Glass  
3-in-1 TV Stand  
for TVs up to 52”/135 lbs.  
NS-3IN1MT50C/NS-3IN1MT50C-C  
SAFETY INFORMATION AND SPECIFICATIONS.2  
PACKAGE CONTENTS: PARTS ..................................4  
PACKAGE CONTENTS: HARDWARE.......................5  
ASSEMBLY INSTRUCTIONS ......................................7  
CARE AND MAINTENANCE................................... 29  
Before using your new product, please read these instructions to prevent any damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Tools needed:  
Phillips screwdriver  
Pencil  
Power drill  
Level  
Edge-to-edge stud finder  
3/8” drill bit (for tipping  
restraint)  
3/16” wood drill bit  
or  
Hammer  
1/2” Socket wrench  
7/16” masonry drill bit  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
PACKAGE CONTENTS: PARTS  
Make sure that you have all the parts necessary to assemble your new TV stand.  
C Short back frame (1)  
B Right side frame (1)  
A Left side frame (1)  
E Top crossbar (1)  
F Top stringer (1)  
D Long rear support (1)  
G Middle crossbar (1)  
I Bottom brace (1)  
H Middle stringer (1)  
J Bottom stringer (1)  
K Top glass (1)  
L Middle glass shelf (1)  
M Bottom glass shelf (1)  
N Swivel bracket (1)  
Q TV bracket (2)  
P Mounting frame (1)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
PACKAGE CONTENTS: HARDWARE  
Note: You may receive extra hardware.Note: You may receive extra hardware.  
Make sure that you have all the hardware necessary to assemble your new TV stand.  
Label  
R
Hardware  
Qty.  
2
Label  
X
Hardware  
Qty.  
32  
Lock washer  
Cable clip  
Flat washer  
Hex nut  
Y
Z
36  
8
Suction cup  
S
T
19  
8
Bolt 3/4” (19.05  
mm)  
Lag bolt  
AA  
BB  
4
4
Bolt 1 3/8”  
(34.92 mm)  
U
V
4
8
Large flat washer  
Bolt 1 5/8”  
(41.27 mm)  
Concrete anchor  
Open wrench  
CC  
4
1
DD  
Bolt 2 1/4”  
(57.15 mm)  
EE  
FF  
2
1
Allen (hex) wrench 0.158” (4 mm)  
Touch-up pen  
W
12  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
PACKAGE CONTENTS: HARDWARE (continued)  
Label  
Hardware  
Qty.  
Label  
Hardware  
Qty.  
4
QQ  
Lock washer M4  
GG  
1
Tipping restraint hardware kit  
Bolt M4 × 12 mm  
Lock washer M5  
Lock washer M6  
RR  
SS  
4
4
HH  
II  
4
4
Bolt M4 × 30 mm  
Bolt M5 × 12 mm  
JJ  
KK  
LL  
4
4
4
Lock washer M8  
Large spacer  
TT  
4
4
Bolt M5 × 30 mm  
Bolt M6 × 12 mm  
UU  
Small spacer  
VV  
4
8
MM  
NN  
4
4
Bolt M6 × 35 mm  
Bolt M8 × 16 mm  
Flat washer M4/M5  
WW  
XX  
Flat washer M6/M8  
4
PP  
4
Bolt M8 × 40 mm  
Sellpoints Video Instruction Guide  
assembling and installing your product.  
1
2
3
4in  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100mm  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
ASSEMBLY INSTRUCTIONS  
Step 1: Align and attach the left and right side frames (A and B) to the  
back frame (C)  
Caution: Assemble your stand on a carpeted floor or the empty carton to avoid scratching your stand.  
1 Insert two 1 3/8" bolts (U) through both lock washers (X) and flat washers (Y) through the drilled holes on the  
left side frame (A) and screw into the threaded holes on the side of the short back frame (C).  
2 Repeat the same procedure to attach the right side frame (B).  
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all  
bolts. This will make the assembly easier.  
UP  
You’ll need:  
Y (4)  
X (4)  
U (4)  
EE (1)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
Step 2: Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to  
the side frames (A and B)  
1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top  
rail of the side frames (A and B) and securely screw into the threaded holes of the top crossbar (E).  
2 Repeat the same procedure to attach the middle crossbar (G) to the middle rail of the side frames (A and B).  
3 Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the  
bottom rail of the side frames (A and B) and securely screw into the threaded holes of the bottom brace (I).  
UP  
You’ll need:  
X (6)  
Y (6)  
EE (1)  
V (4)  
W (2)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 3: Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B)  
1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top  
rail of the side frames (A and B) and securely screw into the threaded holes of the top stringer (F).  
2 Repeat the same procedure to attach the middle stringer (H) to the middle rail of the side frames (A and B).  
3 Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the  
bottom rail of the side frames (A and B) and securely screw into the threaded holes of the bottom stringer (J).  
You’ll need:  
X (6)  
Y (6)  
EE (1)  
V (4)  
W (2)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 4: Leveling the stand  
Stand the assembled frame upright. Adjust the levelers on the side frames (A and B) to level the assembly.  
NOTE: For swivel stand assembly, see “SWIVEL STAND ASSEMBLY INSTRUCTIONS” on page 22. For Wall Mount or  
Table Top assembly, continue to the next step.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 5: Attach the cable clips  
• Attach two of the cable clips (R) to the back of the side frames (A and B) with two 3/4" bolts (T) per cable clip.  
You’ll need:  
R (2)  
T (4)  
EE (1)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 6: Attach the shelves  
1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom  
stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).  
TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it  
clockwise into the hole, as if you were screwing it in.  
2 Place the top glass shelf (K) with the black side down onto the suction cups on the top crossbar (E) and stringer  
(F).  
3 Place the middle glass shelf (L) with the black side down onto the suction cups on middle crossbar (G) and  
stringer (H).  
4 Place the bottom glass shelf (M) with the black side down onto the suction cups on bottom brace (I) and  
stringer (J).  
Note: For Wall Mount assembly, see “WALL MOUNT ASSEMBLYINSTRUCTIONS” on page 14. For Table Top final  
assembly, continue to the next step.  
You’ll need:  
S (19)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
FINAL TABLE TOP ASSEMBLY INSTRUCTIONS  
Step 7: Position the TV stand and install the tipping restraint hardware kit  
1 Position the assembled stand against a wall where you plan to use it.  
2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the  
restraint hardware to the wall and the stand.  
Anchor  
Anchor  
Wall  
Wall  
Bolt  
Wall  
Long screw  
You’ll need:  
GG (1)  
3/8” masonry or  
wood drill bit  
Power drill  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
WALL MOUNT ASSEMBLYINSTRUCTIONS  
Step 1: Select the correct bolts, washers, and spacers for your TV.  
M4 hardware assembly:  
• M4 x 12 mm bolts (HH) top screw holes  
• M4 x 30 mm bolts (II) bottom screw holes  
• M4 lock washers (QQ)  
• M4/M5 Flat washers (WW)  
• Small spacers (VV)  
M5 hardware assembly:  
• M5 x 12 mm bolts (JJ) top screw holes  
• M5 x 30 mm bolts (KK) bottom screw holes  
• M5 lock washers (RR)  
• M4/M5 flat washers (WW)  
• Small spacers (VV)  
M6 hardware assembly:  
• M6 x 12 mm bolts (LL) top screw holes  
• M6 x 35 mm bolts (MM) bottom screw holes  
• M6 lock washers (SS)  
• M6/M8 flat washers (XX)  
• Large spacers (UU)  
M8 hardware assembly:  
• M8 x 16 mm bolts (NN) top screw holes  
• M8 x 40 bolts (PP) bottom screw holes  
• M8 lock washers (TT)  
• M6/M8 flat washers (XX)  
• Large spacers (UU)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
Step 2: Determine whether your TV has a flat back or an irregular or obstructed  
back  
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages  
and scratches.  
2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for  
instructions.  
3 Temporarily lay the TV brackets (Q) on the back of your TV.  
4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.  
5 Identify which type of back your TV may have:  
Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers  
when assembling the wall mount.  
Obstructed back: The brackets block any of the jacks on the back of your TV. You will need spacers when  
assembling the wall mount.  
Irregularly-shaped back: There is a gap between the bracket and some part of the back of your TV. You will need  
spacers when assembling the wall mount.  
6 Remove the brackets.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 3: Option 1 - Mounting bracket instructions for a TV with a flat back  
To mount the TV brackets:  
1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the  
bottom of the TV. Make sure that the brackets are level.  
2 Place the flat washers (WW or XX) then the lock washers (QQ, RR, SS, or TT) over the holes in the TV brackets (Q)  
that align with the screw holes on the back of your TV, then insert the bolt (HH, JJ, LL, or NN) through the  
washers.  
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.  
or  
or  
NN  
or LL  
HH  
JJ  
or  
or TT  
SS  
or RR  
QQ  
XX  
WW or  
You’ll need:  
Bolts & Washers  
or  
or  
Phillips screwdriver  
or  
Level  
HH (4)  
QQ (4)  
JJ (4)  
LL (4)  
SS (4)  
NN (4)  
or  
or  
or  
or  
RR (4)  
WW (4)  
XX (4)  
TT (4)  
Q TV bracket (2)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 3: Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or  
obstructed back  
1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the  
bottom of the TV. Make sure that the brackets are level.  
2 Place spacers (UU or VV) behind the TV brackets and flat washers (WW or XX) and lock washers (QQ, RR, SS, or  
TT) over the holes in the TV brackets (Q), then insert the bolt (II, KK, MM, or PP) through the washers.  
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.  
or  
II  
or  
or  
KK  
MM  
PP  
or  
or  
QQ  
or  
TT  
SS  
RR  
or  
WW  
XX  
or  
VV  
UU  
You’ll need:  
Bolts & Washers  
Level  
or  
or  
or  
II (4)  
KK (4)  
PP (4)  
MM (4)  
VV (4)  
XX (4)  
UU (4)  
Q TV brackets (2)  
or  
or  
or  
or  
QQ (4)  
RR (4)  
Phillips screwdriver  
SS (4)  
WW (4)  
TT (4)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 4: Option 1 - Mount the frame to a stud wall  
NOTE: See Step 4: Option 2 for instructions on mounting the frame to a concrete wall.  
1 Use a stud sensor to locate two adjacent wall studs, then position the mounting frame (P) exactly between the  
two studs.  
2 Use a level to make sure that the mounting frame is level, then mark the four mounting holes. Remove the  
mounting frame.  
3 Drill four 3/16" (4.76 mm) holes 2.5" (64 mm) deep.  
4 Align the mounting frame (P) with the pilot holes, then secure it to the wall with four lag bolts (AA) and four  
washers (BB).  
CAUTION: Make sure that the lag bolts are tight and secure, but do not overtighten them.  
2.50”  
(64 mm)  
BB  
AA  
BB  
AA  
You’ll need:  
BB (4)  
3/16” drill bit  
1/2” Socket wrench  
Pencil  
AA (4)  
Edge-to-edge  
stud finder  
Drill  
Level  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 4: Option 2 - Mount the frame to a block or concrete wall  
1 Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the  
mounting frame (P) is level, then mark the four mounting holes on the wall. Never locate the mounting holes  
into the mortar between blocks. Remove the mounting frame.  
2 Drill four 7/16" (11 mm) holes through the screw marks to a depth of 2.5" (64 mm).  
3 Insert a concrete anchor (CC) into each of the screw holes using a hammer.  
4 Align the mounting frame over the concrete anchors.  
5 Place a washer (BB) over one of the mounting frame screw holes, then insert a lag bolt (AA) and tighten.  
6 Repeat the previous step for the other three screw holes.  
CAUTION: Make sure that the lag bolts are tight and secure, but do not overtighten them.  
2.50”  
(64 mm)  
CC  
BB  
AA  
You’ll need:  
7/16” masonry  
BB (4)  
Hammer  
Level  
drill bit  
1/2” Socket wrench  
AA (4)  
Drill  
CC (4)  
Pencil  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 5: Attaching the TV to the mounting frame on the wall  
1 Lift the TV up to the mounting frame (P).  
2 Set the hooks on TV brackets (Q) over the mounting frame, then lower the hooks onto the bars on mounting  
frame.  
3 Center the TV, then secure it in place using a screwdriver to tighten the safety bolt on the bottom hooks.  
4 Place the stand with the glass shelves under the TV.  
Note: In this step the mounting frame has  
already been mounted to the wall. This  
illustration shows the TV from the back view  
for clarity.  
Tighten until the safety  
bolt hits the underside  
of the mounting frame.  
You’ll need:  
Phillips screwdriver  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 6: Position the TV stand and install the tipping restraint hardware kit  
1 Position the assembled stand against a wall where you plan to use it.  
2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the  
restraint hardware to the wall and the stand.  
Anchor  
Anchor  
Wall  
Wall  
Bolt  
Wall  
Long screw  
You’ll need:  
GG (1)  
3/8” masonry or  
wood drill bit  
Power drill  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
SWIVEL STAND ASSEMBLY INSTRUCTIONS  
Step 1: Align and attach the long rear support  
1 Insert four 2¼" bolts (W) through the lock washers (X) and the flat washers (Y) through the drilled holes on the  
long rear support (D).  
2 Securely screw into the threaded holes of the side frames (A and B). Make sure that the sockets for the cable  
clips face backward.  
Sockets for cable clips  
face backward.  
You’ll need:  
EE (1)  
Y (4)  
X (4)  
W (4)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
Step 2: Attach the swivel bracket  
1 Align the swivel bracket (N) at the height you would like the center of your TV to be.  
2 Insert a 2¼” bolt (W) through a lock washer (X) and a flat washer (Y) and then through the swiveling bracket (N)  
and the drilled hole on the long rear support (D).  
3 Place a second flat washer (Y), and a lock washer (X) onto the end of the threaded bolt, then secure with a hex  
nut (Z).  
4 Repeat this procedure for the three remaining holes joining the swiveling bracket (N) to the long rear support  
(D).  
5 Securely tighten with the provided open wrench and Allen wrench.  
You’ll need:  
DD (1)  
X (8)  
EE (1)  
Y (8)  
Z (4)  
W (4)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 3: Attach the mounting frame to the swivel bracket  
1 Hold the flat side of the mounting frame (P) against the swivel bracket (N), aligning the holes. Make sure that  
the two recessed holes on mounting frame (P) are at the bottom.  
2 Insert a 3/4" bolt (T) through a flat washer (Y) and then through the hole connecting mounting frame (P) with  
swiveling bracket (N).  
3 Repeat this for the three remaining holes joining the swiveling bracket (N) to the mounting frame (P).  
4 Place a second flat washer (Y), and a lock washer (X) onto the end of the threaded bolt, then secure with a hex  
nut (Z).  
5 Securely tighten with the provided open wrench and Allen wrench.  
You’ll need:  
T (4)  
X (4)  
DD (1)  
Y (8)  
Z (4)  
EE (1)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 4: Attach the cable clips  
• Attach the cable clips (R) to the back of the long rear support (D) in two of four locations with two 3/4" bolts (T)  
per cable clip.  
You’ll need:  
EE (1)  
T (4)  
R (2)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 5: Attaching the TV to the mounting frame on the swivel bracket  
1 Attach the TV brackets (Q) to the back of the television following the steps on pages 15, 16, and 17, depending  
on the type of TV that you own.  
2 Lift the TV up to the mounting frame (P).  
3 Set the hooks on TV brackets (Q) over the mounting frame (P), then lower the hooks onto the bars of the  
mounting frame.  
4 Center the TV, then secure it in place using a screwdriver to tighten the safety bolt on the bottom hooks. Tighten  
until the safety bolt hits the underside of the mounting frame.  
You’ll need:  
Phillips screwdriver  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 6: Attach the shelves  
1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom  
stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).  
TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it  
clockwise into the hole, as if you were screwing it in.  
2 Place the top glass shelf (K) with the black side down onto the suction cups on the top crossbar (E) and stringer  
(F).  
3 Place the middle glass shelf (L) with the black side down onto the suction cups on middle crossbar (G) and  
stringer (H).  
4 Place the bottom glass shelf (M) with the black side down onto the suction cups on bottom brace (I) and  
stringer (J).  
You’ll need:  
S (19)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
Step 7: Position the TV stand and install the tipping restraint hardware kit  
1 Position the assembled stand against a wall where you plan to use it.  
2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the  
restraint hardware to the wall and the stand.  
Anchor  
Anchor  
Wall  
Wall  
Nut and washers  
Wall  
Long screw  
You’ll need:  
GG (1)  
3/8” masonry or  
wood drill bit  
Power drill  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-in-1 TV STAND  
CARE AND MAINTENANCE  
Wood/Laminate  
• Use your favorite type of furniture polish.  
• Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand.  
• Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no  
adverse reaction.  
• Dust frequently with a soft cloth.  
• Never slide objects across surfaces. Lift objects from the top surface rather than dragging them across the finish  
when moving them.  
• Do not expose your stand to direct sunlight, drying heat sources, or dampness.  
Glass  
• Use a commercial liquid glass cleaner and a soft cloth.  
• Do not use harsh powders or any other abrasive substances as they will scratch the glass.  
• Clean spills immediately with a soft, damp cloth.  
• Protect surfaces by using felt, leather, or cork under accessories.  
• Use a protective pad when using your stand as a writing surface (especially when using a ballpoint pen).  
• Dust frequently with a soft cloth.  
WARNING  
Please use your stand correctly and safely. Improper use can cause safety hazards or damage to your furniture or household items. Carefully read  
the following chart.  
Look out for:  
What can happen:  
How to avoid the problem:  
• Children climbing on the stand.  
• Risk of injury or death.  
• Never allow children to climb on or play with the stand.  
• A child may try to reach a toy or other object by climbing • A child climbing on the stand can make it top-heavy and • Do not place toys or food on the top shelves. Children may  
on the stand.  
• Children will play and be active near the TV.  
cause it to tip over.  
• A child playing with a TV can cause it to tip over.  
try to climb to reach them out of curiosity.  
• Improper use of the stand to support TVs.  
• Risk of injury or death.  
• A TV must only be set on furniture specifically designed to  
support a television.  
• Never use a TV that exceeds the weight ratings or size  
guidelines specified for the stand.  
• The stand is designed for use with TVs will specify the • TVs can be very heavy. Note, older CRT TVs tend to be  
maximum weight rating and recommended size of the  
TVs it will safely support.  
unbalanced and prone to tipping forward.  
• Overloaded shelves  
• Risk of injury.  
• Top-heavy furniture can tip over.  
• Overloaded shelves can break.  
• Never exceed the weight limits shown in the instructions.  
• Work from the bottom to the top when loading shelves.  
• The bottom shelves can only support 50 lbs. while the top  
can support 135 lbs.  
• Improperly moving the stand.  
• The stand can tip over or break if improperly moved.  
• Risk of injury.  
• Unload shelves from the top to the bottom before moving  
the stand.  
• Do not push the stand, especially on a carpeted floor. Have a  
friend help you lift the item and set it in place.  
• Do not lift the stand using the top shelf. Lift from the frame  
or leg assembly.  
• Remove the TV before moving the TV stand.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3-in-1 TV STAND  
Modification of any part of the Product, including the  
ONE-YEAR LIMITED  
antenna  
Display panel damaged by static (non-moving) images  
applied for lengthy periods (burn-in).  
WARRANTY - INSIGNIA  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia  
to service the Product  
Definitions:  
The Distributor* of Insignia branded products warrants to you,  
the original purchaser of this new Insignia-branded product  
(“Product”), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a  
period of one (1) year from the date of your purchase of the  
Product (“Warranty Period”).  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA,  
AAA, C etc.)  
Products where the factory applied serial number has been  
altered or removed  
For this warranty to apply, your Product must be purchased in  
the United States or Canada from a Best Buy branded or Future  
Shop branded retail store or online at www.bestbuy.com,  
www.bestbuy.ca, or www.futureshop.ca and is packaged with  
this warranty statement.  
Loss or Theft of this product or any part of the product  
Display panels containing up to three (3) pixel failures (dots  
that are dark or incorrectly illuminated) grouped in an area  
smaller than one tenth (1/10) of the display size or up to  
five (5) pixel failures throughout the display. (Pixel based  
displays may contain a limited number of pixels that may  
not function normally.)  
How long does the coverage last?  
Failures or Damage caused by any contact including but  
not limited to liquids, gels or pastes.  
The Warranty Period lasts for 1 year (365 days) from the date you  
purchased the Product. Your purchase date is printed on the  
receipt you received with the Product.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS  
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA  
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
What does this warranty cover?  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS  
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT  
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,  
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES  
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE  
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN  
During the Warranty Period, if the original manufacture of the  
material or workmanship of the Product is determined to be  
defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product  
with new or rebuilt parts; or (2) replace the Product at no charge  
with new or rebuilt comparable products or parts. Products and  
parts replaced under this warranty become the property of  
Insignia and are not returned to you. If service of Products or  
parts are required after the Warranty Period expires, you must  
pay all labor and parts charges. This warranty lasts as long as you  
own your Insignia Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY  
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND  
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail  
store location, please take your original receipt and the Product  
to any Best Buy or Future Shop store. Make sure that you place  
the Product in its original packaging or packaging that provides  
the same amount of protection as the original packaging. If you  
purchased the Product from a Best Buy or Future Shop online  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
to the address listed on the web site. Make sure that you put the  
Product in its original packaging or packaging that provides the  
same amount of protection as the original packaging.  
To obtain warranty service, in the United States call  
1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call  
1-800-663-2275. Call agents may diagnose and correct the issue  
over the phone.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in China  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at  
Best Buy or Future Shop branded retail stores or websites to the  
original purchaser of the product in the county where the  
original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to weather, lightning, and other acts of God,  
such as power surges  
Accidental damage  
Misuse  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use  
in a place of business or in communal areas of a multiple  
dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in China  
U.S. Patents 8,079,311 & 8,191,485  
Mount WH60FM meets public  
safety requirements as designated  
by the Underwriters Laboratories  
in both US & Canada  
V2 ENGLISH  
14-0478  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Init Paper Shredder NT PS11CC User Manual
JBL Home Theater System CS 360 Xcite User Manual
JBL Speaker gto506c User Manual
JL Audio Car Amplifier J210001 User Manual
Kawasaki Offroad Vehicle Brute Force 750 4x4i User Manual
Kenmore Dishwasher 587144 User Manual
Kenwood MiniDisc Player DM VH7 User Manual
Kidco Camping Equipment P202 User Manual
KitchenAid Trimmer KEBI100B User Manual
Kodak Film Camera TI2104 User Manual