Insignia Flat Panel Television NS 39L400NA14 User Manual

IMPORTANT INFORMATION  
39" LCD TV  
NS-39L400NA14  
FIND YOUR USER GUIDE ONLINE!  
We are going green so a copy of your  
User Guide is not provided in the box  
but is available online.  
then click Support & Service.  
Enter your model number in the box under  
Manual, Firmware, Drivers & Product Information, then click  
X.  
Before using your new product, please read these instructions to  
prevent any damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NS-39L400NA14  
17 The apparatus should not be exposed to dripping or  
splashing, and no objects filled with liquids, such as  
vases, should be placed on the apparatus.  
Important Safety  
Instructions  
CAUTION  
WARNING  
Electric shock hazard  
To reduce the risk of fire or electric shock, do not remove  
any cover or expose the device to rain or moisture. No  
user-serviceable parts are inside. Refer servicing to  
qualified service technicians.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
This symbol indicates that  
Lightning  
dangerous voltage constituting a  
risk of electric shock is present  
within your TV. This label is located  
on the back of your TV.  
For added protection for your device receiver during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the power outlet  
and disconnect any antenna or cable system. This helps  
prevent property damage and personal injury from  
lightning and power line surges.  
This symbol indicates that there  
are important operating and  
maintenance instructions in the  
literature accompanying your TV.  
Power lines  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions.  
Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
Handling the LCD panel  
Your TV’s screen is made of glass. Do not drop your TV  
or hit, jolt, or press hard against the LCD panel. If the  
screen breaks, be careful of broken glass.  
If the LCD panel is broken, make absolutely sure that  
you do not touch the liquid in the panel. This may  
cause skin inflammation.  
If the liquid gets in your mouth, immediately gargle,  
rinse, and consult with your doctor. Also, if the liquid  
gets in your eyes or touches your skin, consult with  
your doctor after rinsing for at least 15 minutes or  
longer in clean water.  
8
9
Replacement parts  
When replacement parts are required, make sure that the  
service technician uses replacement parts specified by the  
manufacturer that have the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock, personal injury, or other hazards.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11 Only use attachments/accessories specified by the  
manufacturer.  
Safety check  
12 Use only with the cart, stand, tripod,  
bracket, or table specified by the  
After completing any service or repair to this device, ask  
the service technician to perform routine safety checks to  
determine that your TV is in correct operating condition.  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
S3125A  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
Power source  
Operate your TV only from the type of power source  
indicated on the marking label. If you are not sure of the  
type of power supplied to your home, consult an  
electrician or your local power company.  
13 Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14 Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally,  
or has been dropped.  
Servicing  
These servicing instructions are for use by qualified service  
personnel only. To reduce the risk of electric shock, do not  
perform any servicing other than that contained in the  
operating instructions unless you are qualified to do so.  
15 The wall plug is the disconnecting device. The plug  
must remain readily operable.  
16 Remote control batteries should not be exposed to  
excessive heat such as sunshine, fire, or the like.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mobile telephone warning  
CAUTION  
To avoid interference with your TV picture and sound,  
operating problems, or even damage, keep your cordless  
and cellular telephones away from the TV.  
Damage requiring service  
Unplug this TV from the power outlet and refer servicing  
to qualified service personnel under the following  
conditions:  
End of life directives  
Your TV contains tin-lead solder. Disposal of this material  
may be regulated for environmental reasons. Your TV also  
contains material that can be recycled and reused. For  
disposal or recycling information, contact your local  
authorities to find a recycler in your area.  
When the power supply cord or plug is damaged or  
frayed.  
If liquid has been spilled or objects have fallen into  
your TV.  
If your TV has been exposed to rain or water.  
If your TV does not operate normally by following the  
operating instructions. Adjust only those controls  
that are covered by the operating instructions  
because incorrect adjustment of other controls may  
result in damage and will often require extensive  
work by a qualified technician to restore your TV to its  
normal operation.  
Non-active pixels  
The LCD panel contains almost 3 million thin film  
transistors, which provide exceptionally sharp video  
quality. Occasionally, a few non-active pixels may appear  
on the screen as a fixed blue, green, or red point. These  
non-active pixels do not adversely affect the performance  
of your TV, and are not considered defects.  
If your TV has been dropped or damaged in any way.  
When your TV exhibits a distinct change in  
performance.  
Troubleshooting  
Outdoor antenna grounding  
Warning  
If an outside antenna or cable system is connected to your  
TV, make sure that the antenna or cable system is  
grounded to provide some protection against voltage  
surges and built-up static charges. Article 810 of the  
National Electrical Code, ANSI/NFPA No. 70, provides  
information with respect to correct grounding of the mast  
and supporting structure, grounding of the lead-in wire to  
an antenna discharge unit, size of grounding conductors,  
location of the antenna-discharge unit, connection to  
grounding electrodes, and requirements for the grounding  
electrode.  
Do not try to repair your TV yourself. Contact  
authorized service personnel.  
Remote control  
Problem  
Solution  
Remote control does  
not work  
Make sure that the power cord is correctly connected to  
your TV and a power outlet.  
Make sure that there are no obstructions between the  
remote control and the remote control sensor on the front  
of the TV.  
Antenna lead-in wire  
Grounding clamp  
1
2
3
4
5
Point the remote control directly at the remote control  
sensor on your TV. For the location of the remote control  
sensor, see “Front” in the online User Guide.  
Make sure that the batteries are installed correctly. See  
“Installing remote control batteries” in the online User  
Guide.  
1
2
Antenna discharge unit  
Grounding conductors  
Ground clamps  
3
4
Replace dead batteries with new batteries. See “Installing  
remote control batteries” in the online User Guide.  
Trouble programming  
your existing  
universal remote  
control  
5
6
See instructions and a table of common codes in  
“Programming a different universal remote control” in the  
online User Guide.  
Codes are subject to change. For up-to-date codes, go to  
Replace dead batteries with new batteries. See “Installing  
remote control batteries” in the online User Guide.  
Refer to the User Guide that accompanied your universal  
remote control and contact the manufacturer if problems  
persist.  
Power service grounding  
electrode system  
Electric service equipment  
6
7
7
Note to CATV system installer  
Article 820 of the National Electrical Code, ANSI/NFPA No.  
40 provides guidance for correct grounding. Specifically, it  
states that the cable ground must be connected to the  
grounding system of the building as close to the point of  
cable entry as practical.  
General  
Problem  
Solution  
Condensation  
Moisture will form on the TV if the TV is brought from cool  
surroundings into a warm room or if the temperature of  
the room rises suddenly. When this happens, the TV's  
performance may be impaired. To prevent this, let the TV  
stand in its new surroundings for about an hour before  
switching it on, or make sure that the room temperature  
rises gradually.  
Condensation may also form during the summer if the TV  
is exposed to the breeze from an air conditioner. In such  
cases, change the location of the TV.  
No power  
Make sure that the power cord is correctly connected to  
your TV and a power outlet.  
Unplug the power cord, wait 60 seconds, then plug the  
cord back in and turn on your TV.  
Other devices (for example, a surround sound receiver,  
external speakers, fans, or hair dryers) may be interfering  
with your TV. Try turning off one device at a time to  
determine which device is causing interference. After you  
have determined which device is causing interference,  
move it further from the TV to eliminate the interference.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
NS-39L400NA14  
Screen  
Problem  
Solution  
Screen size measured  
diagonally  
Display type  
Panel 60 Hz vs.120 Hz  
Display resolution  
Panel resolution  
Aspect ratio  
Contrast ratio  
(typical)–panel  
Dynamic contrast ratio–  
list value  
TV Brightness (minimum)  
cd/m2  
“No signal” error  
Press INPUT and make sure that you have selected the  
38.5 in.  
message is displayed  
correct input for the device or service you are trying to use.  
If you are using a cable or satellite box, use the remote that  
came with that box to change channels.  
LCD  
60Hz  
Make sure that you have the correct input selected to view  
channels from the cable or satellite box.  
1080p  
1920 (H) × 1080 (V)  
16:9  
After Auto Channel  
Search, there are no  
channels  
Reception can vary by channel depending on the broadcast  
power level of a given station. Contact your cable or  
satellite TV provider.  
3000:1  
Make sure that the antenna or cable/satellite TV is  
connected securely to your TV.  
Try replacing the cable between the antenna/cable or  
cable/satellite box and your TV.  
6500:1  
One or more channels  
do not display  
240 nits  
Make sure that the channels are not blocked. See “Setting  
parental control levels” in the online User Guide.  
Make sure that the channels are not hidden. The channel  
may have been deleted from the channel list. You can tune  
to the channel by pressing the number buttons or you can  
add the channel back to the channel list. See “Hiding  
channels” in the online User Guide.  
If you are using a cable or satellite box, use the remote that  
came with that box to change channels.  
Make sure that you have the correct input selected to view  
channels from the cable or satellite box.  
Comb filter  
Response time  
Horizontal viewing angle  
Vertical viewing angle  
3d y/c digital  
8.5 ms  
176°  
176°  
Display resolutions  
HDMI suggested resolutions  
Component video suggested  
resolutions  
1080p, 1080i, 720p, 480p, 480i  
1080i, 720p, 480p, 480i  
If you are using an antenna, the digital channel signal may  
be low. To check the digital channel signal strength, see  
“Checking the digital signal strength” in the online User  
Guide.  
640 × 480/60Hz,  
800 × 600/60Hz,  
1024 × 768/60Hz,  
1280 × 1024/60Hz,  
1920 × 1080/60Hz  
Password is lost  
PC/VGA suggested  
scan rates  
Enter 9999 to access parental controls, then set a new  
password. See “Setting or changing the password” in the  
online User Guide.  
Some settings cannot  
be accessed  
If a setting is grayed, the setting is not available in the  
current video input mode.  
Tuner  
TV cabinet creaks  
Analog  
Digital  
NTSC  
When the TV is in use, the temperature rises naturally and  
may cause the cabinet to expand or contract which can  
cause a creaking noise. This is not a malfunction.  
ATSC, 8-VSB, Clear-QAM  
Inputs  
Control buttons do  
not work  
Make sure that the Button Lock option is set to Off. See  
“Locking control buttons” in the online User Guide.  
Unplug the power cord, wait a few seconds, then plug the  
cord back in and turn on your TV.  
3 (side)  
E-EDID compliant  
HDCP compliant  
HDMI  
TV keeps turning off  
Make sure that the sleep timer is not turned on. See  
“Setting the sleep timer” in the online User Guide.  
Component video  
Composite video  
1 (back)  
1 (back)  
Shared with component Y  
Notes  
Shared audio (component  
and composite)  
S-Video  
PC/VGA  
3.5mm PC audio input  
Yes  
If the problem is not solved by using these  
troubleshooting instructions, turn off your TV,  
then turn it on again.  
Additional troubleshooting information is in  
your online User Guide. Go to  
No  
1 (back)  
1 (back)  
Support & Service. Enter your model number  
in the box under Manual, Firmware, Drivers  
& Product Information, then click X.  
1 (side)  
HDMI 1/DVI jack  
DVI  
1 (side)  
USB  
Supports JPEG and firmware upgrade  
Antenna/Cable  
Outputs  
1 (back)  
Specifications  
Specifications are subject to change without notice.  
Dimensions and weight  
Video  
No  
Analog audio/Headphone  
Digital audio  
WiFi  
1 (side)  
1 (optical) (back)  
36.1 × 23.3 × 4.4 in. (91.8 × 59.2 × 11.2) cm  
No  
No  
Without stand  
22.9 lbs. (10.4 kg)  
Ethernet  
36.1 × 25.0 × 8.9 in. (91.8 × 63.5 × 22.5 cm)  
With stand  
25.8 lbs (11.7 kg)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio  
Speakers  
Legal notices  
Number: 2  
Watts per channel: 6W  
FCC Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
Power  
On: 130W  
Standby: <0.5W  
Power consumption  
Power input  
AC 120 V, 60Hz  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measure:  
Miscellaneous  
OSD languages  
INlink  
Game Mode  
ENERGY STAR qualified  
Internet connectable  
English, French, Spanish  
Yes  
No  
No  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
No  
M5 type (8 mm length) (4 pcs)  
TV base screws  
V-Chip (version 2.0)  
Sleep timer  
Channel labeling  
VESA mount (mm)  
Consult the dealer or an experienced radio/TV technician for help  
Yes  
Yes  
Yes  
Warning  
Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate this  
equipment.  
400 × 200  
M6 type  
(horizontal × vertical)  
VESA mount screws  
Cables  
Connections to this device must be made with shielded cables with  
metallic RF/EMI connector hoods to maintain compliance with FCC Rules  
and Regulations.  
Note  
The length of the wall-mount screws vary  
Canadian Notice  
depending on the wall-mount bracket you  
purchased. See the instructions that came with the  
wall-mount bracket for screw lengths.  
CAN ICES-3 (B)/NMB-3(B)  
Standard Television Receiving Apparatus — Appareil de réception  
télévision ordinaire, Canada BETS-7 / NTMR-7  
IC Statement  
This device complies with Industry Canada licence-exempt RSS  
standard(s).  
Operation is subject to the following two conditions: (1) this device may  
not cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of the device.  
This equipment complies with IC radiation exposure limits set forth for an  
uncontrolled environment.  
Dolby License Notice and Trademark Acknowledgement  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
HDMI  
The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other  
countries.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NS-39L400NA14  
Products where the factory applied serial number has been altered or  
removed  
One-year limited warranty -  
Insignia Televisions  
Definitions:  
Insignia Products ("Insignia") warrants to you, the original purchaser of  
this new Insignia-branded television ("Product"), that the Product shall be  
free of defects in the original manufacturer of the material or  
workmanship for a period of one (1) year from the date of your purchase  
of the Product ("Warranty Period"). For this warranty to apply, your  
Product must be purchased in the United States or Canada from a Best  
Buy or Future Shop authorized dealer of Insignia brand products only that  
are packaged with this warranty statement.  
Loss or Theft of this product or any part of the product  
Failures or Damage caused by any contact including but not limited  
to liquids, gels or pastes.  
Up to three (3) pixel failures (dots that are dark or incorrectly  
illuminated) grouped in an area smaller than one tenth (1/10) of the  
display size or up to five (5) pixel failures throughout the display.  
(Pixel based displays may contain a limited number of pixels that may  
not function normally.)  
Problems with delay in motion or action of video images while  
playing first-person style video games.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR  
EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE  
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,  
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS  
MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND  
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET  
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,  
WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES  
AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR  
PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2013 BBY Solutions, Inc.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you  
purchased the Product. Your purchase date is printed on the receipt you  
received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or  
workmanship of the Product is determined to be defective by an  
authorized Insignia repair center or store personnel, Insignia will (at its  
sole option): (1) repair the Product with new or rebuilt parts; or (2) replace  
the Product at no charge with new or rebuilt comparable products or  
parts. Products and parts replaced under this warranty become the  
property of Insignia and are not returned to you. If service of Products or  
parts are required after the Warranty Period expires, you must pay all  
labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage  
terminates if you sell or otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store  
location and your television Product has a screen size of less than 42  
inches, please take your original receipt and the Product to any Best Buy  
or Future Shop store. Make sure that you place the Product in its original  
packaging or packaging that provides the same amount of protection as  
the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to  
the address listed on the web site. Make sure that you put the Product in  
its original packaging or packaging that provides the same amount of  
protection as the original packaging.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.  
Registered in some countries. All other products and brand names are  
trademarks of their respective owners.  
To obtain in-home warranty service for a television with a screen 42  
inches or larger, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents will  
diagnose and correct the issue over the phone or will have an  
Insignia-approved repair technician dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or  
Future Shop branded retail stores or websites to the original purchaser of  
the product in the county where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse, unintentional or intentional  
Abuse, unintentional or intentional  
Negligence  
Commercial purposes/use, including but not limited to use in a place  
of business or in communal areas of a multiple dwelling  
condominium or apartment complex, or otherwise used in a place of  
other than a private home.  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images  
applied for lengthy periods (burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Outages, static or other problems with over -the-air reception of  
television broadcast signals.  
Attempted repair by any person not authorized by Insignia to service  
the Product  
Products sold "as is" or "with all faults"  
Consumables, including but not limited to batteries (i.e. AA, AAA, C  
etc.)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSIGNIA is a registered trademark of BBY Solutions, Inc.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2013 BBY Solutions, Inc.  
All Rights Reserved  
1-877-467-4289  
V2 ENGLISH  
12-1347  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Universal Remote PD02P APS PTX M User Manual
JVC Portable CD Player RC EX30BC User Manual
Keating Of Chicago Fryer APR 96 User Manual
Kenmore Refrigerator 795785 User Manual
Kidde Smoke Alarm KN SMFM I User Manual
KitchenAid Microwave Oven KHMS1850SBL0 User Manual
Klipsch Speaker Cornwall III User Manual
Knoll Stereo Receiver IR230 User Manual
Kodak Film Camera 2100 Auto User Manual
Kompernass Laminator ULG300A1 User Manual