37" LCD TV | Téléviseur ACL de 37 po | Televisor Pantalla LCD de 37"
NS-37LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Water and moisture
Insignia NS-37LCD
37” LCD TV
Do not use your TV near water. For example, do
not use it near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool.
Cleaning
Unplug your TV before cleaning. Do not use
liquid or aerosol cleaners. Use only a damp cloth
to clean the exterior of your TV.
Contents
Ventilation
Slots and openings in the cabinet and the back
or bottom are provided for ventilation, reliable
operation, and protection from overheating.
These openings must not be blocked or covered.
Do not block the openings by placing your TV on
a bed, sofa, rug, or other similar surface. Do not
place your TV near or over a radiator or heat
register. Do not place your TV in a built-in
installation, such as a bookcase or rack, unless
you provide correct ventilation or follow the
manufacturer’s instructions.
Heat
Safety information
Make sure that your TV is located away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Warning
To reduce the risk of electric shock, do not remove the cover or
back. There are no user-serviceable parts inside. Refer
servicing to qualified service personnel.
Grounding or polarization
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a
grounding prong. The wide blade or grounding
prong are provided for your safety. If the plug
does not fit, contact an electrician to replace the
obsolete outlet.
To reduce the risk of fire or electric shock, do not expose your
TV to rain or moisture.
Caution
To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does
not fit, consult a licensed electrician to replace the obsolete
outlet. Do not modify the power cord plug, or you will defeat
this safety feature.
Power cord protection
Route power cords so that they are not likely to
be walked on or pinched by items placed on or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from your TV.
This symbol indicates that dangerous
voltage constituting a risk of electric shock
is present within your TV. This label is
located on the back of your TV.
Attachments
Do not use attachments not recommended by
Insignia because they may cause hazards.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
your TV.
Stand
Do not place your TV on an unstable cart, stand,
tripod, bracket, or table. Your TV may fall,
causing serious personal injury and serious
damage to your TV. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with your TV. If you mount
your TV to the wall, follow the manufacturer’s
instructions and use a mounting accessory
recommended by the manufacturer. Your TV and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause your TV and cart
Warning
Your TV contains tin-lead solder and a fluorescent lamp
containing a small amount of mercury. Disposal of these
materials may be regulated for environmental reasons. For
disposal or recycling information, contact your local authorities
Read instructions
Read all of the safety and operating instructions
before you use your TV.
Retain instructions
Retain safety and operating instructions for
future reference.
combination to overturn.
Lightning
Follow warnings and instructions
For added protection for your TV’s receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect
the antenna or cable system. This helps prevent
damage to your TV from lightning and power line
surges.
Follow all warnings on your TV and in the
operating instructions. Follow all operating and
use instructions.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Screen protection
Servicing
Do not attempt to service your TV yourself
because opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Your TV’s screen is made of glass. Do not drop
your TV or hit the glass screen. If the screen
breaks, be careful of broken glass.
Pixel defect
Your TV’s screen is designed to display finely
detailed pictures. Occasionally, a few non-active
pixels may appear on the screen as fixed points
of blue, green, or red. This is not a defect and
does not affect your TV’s performance.
Replacement parts
When replacement parts are required, make
sure that the service technician uses
replacement parts specified by the manufacturer
that have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock, personal injury, or
other hazards.
Outdoor antenna grounding
If an outside antenna or cable system is
connected to your TV, make sure that the
antenna or cable system is grounded to provide
some protection against voltage surges and
built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to correct
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of the antenna-discharge unit,
Overloading
Do not overload power outlets and extension
cords because this can result in a risk of fire or
electric shock.
Object and liquid entry
Never push objects of any kind into your TV
through openings because objects may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on your TV.
connection to grounding electrodes, and
requirements for the grounding electrode.
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under
the following conditions:
7
6
•
•
•
•
When the power supply cord or plug is
damaged or frayed.
If liquid has been spilled or objects
have fallen into your TV.
If your TV has been exposed to rain or
water.
If your TV does not operate normally
by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because incorrect adjustment of other
controls may result in damage and will
often require extensive work by a
qualified technician to restore your TV
to its normal operation.
If your TV has been dropped or
damaged in any way.
When your TV exhibits a distinct
change in performance.
5
4
3
1
2
1
2
Electric service equipment
Power service grounding electrode
system
3
4
5
6
7
Ground clamps
Grounding conductors
Antenna discharge unit
Grounding clamp
•
•
Antenna lead-in wire
Replacement parts
When replacement parts are required, make
sure that the service technician uses
replacement parts specified by the manufacturer
that have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock, personal injury, or
other hazards.
Note to CATV system installer
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and in particular, specifies that the
cable ground must be connected to the
grounding system of the building as close to the
point of cable entry as practical.
Safety check
After completing any service or repair to this TV,
ask the service technician to perform routine
safety checks to determine that your TV is in
correct operating condition.
Power source
Operate your TV only from the type of power
source indicated on the marking label. If you are
not sure of the type of power supplied to your
home, consult your TV dealer or local power
company.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Side and Back
Features
Front
Control
Description
1
2
Power indicator Lights when your TV is turned on.
Remote sensor Receives signals from the remote control.
Top
Remove
the jack
cover
1
2
3
4
5
#
Control
Description
1
CH+/CH–
Press to change the channel.
In the on-screen menu, press to select
menus and options.
2
VOL+/VOL–
Press to increase or decrease the volume.
In the on-screen menu, press to adjust a
setting or change a value.
#
Jack
1
2
3
4
5
6
7
8
9
S/PDIF digital audio output (optical)
HDMI input
3
4
5
MENU
INPUT
Power
Press to open the on-screen menu.
Press to select the video input.
Press to turn your TV on or off.
D-SUB AUDIO input
D-SUB PIC (video) input
COMPONENT INPUT Y
COMPONENT INPUT Cb/Pb
COMPONENT INPUT Cr/Pr
COMPONENT INPUT R AUDIO
COMPONENT INPUT L AUDIO
10 RF (antenna input)
11 S-VIDEO input
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
#
Jack
#
Button
Description
12 AV INPUT VIDEO
13 AV INPUT L AUDIO
14 AV INPUT R AUDIO
15 RS-232 control interface
16 Right speaker output jack
17 AV OUT VIDEO
1
2
SET
Press to program the remote
control. For more information, see
[Device buttons]
TV–Press to select the TV.
DVD–Press to select a connected
DVD player.
CBL–Press to select cable or satellite
TV.
AUX–Press to select a device
assigned to this button.
18 AV OUT L AUDIO
19 AV OUT R AUDIO
20 HEADPHONE
3
[Number buttons] Press to enter channel numbers.
21 Left speaker output jack
In the on-screen menu, press to
enter your parental control’s
password.
Remote control
4
5
INPUT
Press to select the video input.
Note
For instructions on programming the remote
Press to go to last viewed channel.
6
7
8
9
+ CH –
MUTE
MENU
Press to change TV channels.
Press to mute the sound.
Press to open the on-screen menu.
Press the arrows to move down, up,
left, or right in the on-screen menu.
OK
Press the OK button to confirm
changes or to toggle options on and
off in the on-screen menu.
10
11
12
13
Press to pause a video tape or DVD.
Press again to resume playback.*
Press to start recording a video tape
or DVD.*
Press to fast-reverse a DVD or video
tape.*
Press to skip to the previous chapter
on a DVD.*
14 MTS/SAP
Press to select one of the preset
audio modes. You can select MONO,
STEREO, or SAP.
15 ZOOM
Press to select the aspect ratio.
16
Press to turn on your TV or put it
into Standby mode.
[Power]
17 [LED]
Lights when you are programming
the remote control. For more
18
—
Press to select a sub-channel. For
19 + VOL –
20 INFO
21 EXIT
22
Press to adjust the volume.
Press to display status information.
Press to close the on-screen menu.
Press to start DVD or CD playback if
a DVD or CD player is connected.*
23
Press to stop DVD or CD playback if
a DVD or CD player is connected.*
24
Press to fast-forward a video tape or
DVD.*
25
Press to skip to the next chapter of a
DVD.*
26 SLEEP
Press to set the sleep timer. For
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
#
Button
Description
Setting up your TV
27 CCD
Press to turn closed captions on and
off. For more information, see
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
28 PICTURE
29 FREEZE
Press to select the picture mode.
Press to freeze the video image.
Press again to unfreeze the image.
Do not freeze the video image for
long periods of time. You may
damage the TV screen.
30 AUDIO
Press to select the sound mode.
31 A, B, C, D, E
These buttons do not have any
function for this TV. They may,
however, be used with other devices
when this remote is used as a
universal remote control. The exact
function depends on the specific
device being controlled.
2 Insert two AA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
* For the remote to control your VCR or DVD player, the remote
control must be programmed to operate it. For more information,
Using the remote control
To use the remote control:
•
Point the remote control towards the remote
sensor on the front of your TV.
3 Replace the cover.
60°
16.4 ft.
(5 m)
Notes
•
•
•
•
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Notes
•
•
•
•
Do not expose the remote control to shock or
liquids.
Do not use the remote control in an area with
high humidity.
Do not place the remote control in direct
sunlight.
Do not place objects, such as furniture,
between the remote control and the remote
sensor.
•
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
•
The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the
angle at which you use the remote control.
Connecting your TV to a power outlet
To connect your TV to a power outlet:
•
Plug the power cord into a power outlet.
Notes
•
Make sure that you use the correct type of
power. See the label on your TV.
•
If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the power outlet.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Use the following illustration to connect an
outside antenna:
Attaching and connecting the speaker
To attach and connect the speaker to your
TV:
Combination antenna
VHF/UHF antenna
VHF/UHF
antenna
1 Unplug the TV power cord and all devices
OR
connected to your TV.
2 Attach the speaker and fixed board to the TV
with the screws (supplied) and tighten
securely.
300 ohm cable
with adapter
75 ohm
cable
3 Install the two connecting covers on the fixed
boards.
Separate antennas
4 Connect the speakers to the speaker jacks
on the sides of your TV. Make sure that you
connect the speaker audio cables to the
speaker output jacks matching the + and -
polarity of the speakers by color.
UHF
antenna
VHF
antenna
Antenna
cable
Combiner
OUT
OR
IN
Fixed board
Speaker
Fixed board
Screws
Screws
Connecting
cover
Connecting
cover
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable
TV.
Some cable TV providers scramble the signals
for “premium” (pay) channels. To view these
channels, you need a converter/descrambler
box.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
If you do not have a converter/descrambler box,
you can connect your cable TV directly to your
TV. If you have a converter/descrambler box, you
can connect your cable TV using an RF switch
(not supplied). For more information about
connecting a converter/descramble box, contact
your cable TV provider.
75 ohm cable
300 ohm cable
To connect cable TV without a
converter/descrambler box:
1 Connect one end of a 75 ohm cable to the
•
•
If your antenna cable has a 75 ohm
connector, connect the cable to the coaxial
jack on the back of your TV.
If your antenna cable has a 300 ohm
connector, connect the cable to a
coaxial jack on the back of your TV.
2 Connect the other end of the cable to the
cable TV wall outlet.
300-75 ohm adapter (not included), connect
the adapter to a 75 ohm cable, then connect
the other end of the 75 ohm connector to the
coaxial jack on the back of your TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
To connect cable TV with a
converter/descrambler box:
Connecting a VCR
You can connect a VCR with a standard
•
Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
audio/video cable or with a S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use audio cables
to connect the audio output.
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
Warning
Make sure that you turn off and unplug your TV
before installing devices.
converter/descrambler controls.
Two-set signal splitter
RF switch
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
A
B
To connect a VCR and play a videotape:
Out
In
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO in jacks on the back of
your TV.
TV
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
VCR.
Cable converter/descrambler box
Connecting a sound system
- OR -
Plug in the audio cables as described above,
then plug one end of an S-Video cable into
the S-Video jack on the back of your TV and
the other end into the S-Video jack on the
VCR.
To connect to a sound system:
1 Plug the S/PDIF optical cable into the S/PDIF
jack on the back of your TV.
2 Plug the other end of the S/PDIF cable into
the S/PDIF in jack on the sound system.
3 Turn on your TV.
4 Press the INPUT button repeatedly to select
Composite1 (or S-Video if you connected
the VCR to the S-Video jack).
Warning
Make sure that you turn off and unplug your TV
before installing devices.
5 Turn on your VCR.
Note
6 Insert a videotape, then press the PLAY
For home theater systems, use an S/PDIF
(optical) cable to achieve full sound capabilities.
button.
S-Video cable
TV
OR
Video cable
Audio cable
S/PDIF (optical)
cable
Y=yellow (video)
W=white (audio left)
R=red (audio right)
S/PDIF IN jack
Audio processor
OR
Stereo system
VCR
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Connecting a VCR (for recording)
Connecting an amplifier
Warning
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Make sure that you turn off and unplug your TV
before installing devices.
To connect and record a program on a VCR:
To connect to an amplifier:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO jacks on the back of
your TV.
1 Plug the audio cables into the AUDIO L and
AUDIO R jacks on the back of your TV.
2 Plug the other end of the audio cables into
2 Plug the other end of the audio/video cable
the audio and video in jacks on the amplifier.
into the audio and video in jacks on the VCR.
TV
3 Turn on your TV.
4 Select a program you want to record.
5 Turn on the VCR.
6 Insert a videotape, then press the record
button on the VCR.
HEADPHONE
Y=yellow (video)
W=white (audio left)
R=red (audio right)
Audio cable
TV
W=white (audio left)
R=red (audio right
HEADPHONE
Audio cable
Video cable
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Connecting a camcorder
Connecting a DVD player
Warning
Warning
Make sure that you turn off and unplug your TV
Make sure that you turn off and unplug your TV
before installing devices.
before installing devices.
To connect and play video from a camcorder:
To connect a DVD player and play a DVD:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO jacks on the back of
your TV.
1 Plug the HDMI cable into the HDMI jack on
the back of your TV and to the HDMI Output
jack on the back of the DVD player.
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
camcorder.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select
HDMI.
3 Turn on your TV.
4 Turn on the DVD player.
4 Press the INPUT button repeatedly to select
Composite 2.
5 Insert a DVD, then press the Play button on
the DVD player.
5 Turn on the camcorder, then set it to output
mode. See your camcorder documentation
for more information.
TV
6 Insert a tape into the camcorder, then press
the Play button on the camcorder.
TV
Y=yellow (video)
W=white (audio left)
R=red (audio right)
HDMI
Output
Audio cable
Video cable
OUT
IN
Note
If the DVD player has DVI output only, use a
DVI-to-HDMI adapter cable (not supplied) to
connect the DVD player to the HDMI jack on the
back of your TV. Then connect the audio cable to
the D-SUB AUDIO IN jack on the back of your TV.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Connecting a DTV receiver
Connecting a computer
Warning
Warning
Make sure that you turn off and unplug your TV
Make sure that you turn off and unplug your TV
before installing devices.
before installing devices.
To connect a DTV receiver and watch DTV:
To connect and watch video from a
computer:
1 Plug the audio cables into the AUDIO L and
AUDIO R jacks on the back of your TV.
1 Plug the audio cable into the D SUB audio
input jack on the back of your TV.
2 Plug the other end of the audio cables into
the audio out jacks on the DTV receiver.
2 Plug the other end of the audio cable into the
audio out jacks on the computer.
3 Plug the component video cables into the
Component in jacks on the back of your TV.
3 Plug the D SUB cable into the PIC input jack
on the back of your TV.
4 Plug the other end of the component video
cables into the Component jacks on the DTV
receiver.
4 Plug the other end of the D SUB cable into
D SUB jack on your computer.
5 Turn on your TV.
5 Turn on your TV.
6 Press the INPUT button repeatedly to select
Component1.
6 Press the INPUT button repeatedly to select
VGA.
7 Turn on your DTV receiver.
7 Turn on your computer, then set up your
computer for external VGA input. See your
computer documentation for more
information.
G=green (Y)
B=blue (Cb/Pb)
R=red (Cr/Pr)
TV
TV
Component video cables
R=red (audio right)
W=white (audio left)
Audio cable
Audio cable
D SUB cable
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press the
3 Press the
button to turn on your TV.
button again to turn off your TV.
Selecting the TV source
To select the TV source:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Setup, then press the OK or
button to open the Setup menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
3 Press the
or
button repeatedly to
3 Press the
or
button repeatedly to
highlight Tuning Band, then press the OK or
highlight Manual Ch Set, then press the OK
or button to access the Manual Ch Set
options.
button to access the tuning band options.
4 Select Air for an outside antenna, or select
Cable, Cable HRC, Cable IRC, or Cable
Auto for cable TV. We recommend that you
select Cable Auto for cable TV. For more
information about cable TV selections,
contact your cable TV provider.
4 Press the
or
button to select a channel,
then press the OK button to add or delete a
channel.
5 Press the EXIT button to close the menu.
Changing channels
5 Press the EXIT button to close the on-screen
menu.
To change channels:
Setting up the channel list
•
Press the CH – or + button on the remote
control to go to the next lower or higher
channel.
After you select your TV source (antenna or
cable), you need to set up the channel list. When
you set up your channel list, your TV searches
for all available channels in your area and stores
a list of the channels. When your press the
CH – or + button, your TV skips the channels
that do not have a signal.
Or
Press the number buttons to select a channel
(for example, if you want channel 83, press 8,
then press 3).
Or
Automatically setting up channels
Press the
channel.
button to go to the last viewed
To automatically set up the channel list:
1 Press the MENU button.
Selecting a digital sub-channel
2 Press the
or
button repeatedly to
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
highlight Setup, then press the OK or
button to open the Setup menu.
3 Press the
or
button repeatedly to
highlight Auto Ch Search.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel (for example 8).
2 Press the – button, then press the
sub-channel button (for example 1).
Adjusting the volume
4 Press the OK or button to start the search.
To adjust the volume:
Note
•
Press the VOL – or + button to decrease or
increase the volume.
You can press the Exit button to stop the search.
•
Press the MUTE button to turn off the sound.
Press the MUTE button again to turn the
sound back on.
Manually adding or deleting channels from
the channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
Displaying status information
To display status information:
To add or delete channels:
1 Press the MENU button.
•
Press the INFO button. Your TV displays
status information, such as the channel
number or signal source.
2 Press the
or
button repeatedly to
highlight Setup, then press the OK or
button to open the Setup menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
4 Press the or button to move the cursor.
Selecting the video input source
Press the
or
button select a channel
number or character.
To select the video input source:
•
Press the INPUT button repeatedly to select
the video source. You can select:
•
•
•
•
TV–TV signal
Composite1–AV INPUT1 jacks
Composite2–AV INPUT2 jacks
Component1–COMPONENT INPUT1
jacks
Component2–COMPONENT INPUT2
jacks
VGA–D-SUB jack (computer)
HDMI–HDMI jack
S-Video–S-Video jack
5 Press the OK button to return to the previous
menu, or press the EXIT button to close the
menu system.
•
Freezing the picture
•
•
•
You can freeze (still) the screen image.
Caution
To protect your TV, do not freeze the screen image
for long periods of time.
Checking the DTV signal strength
To check the DTV signal strength:
1 Press the MENU button.
To freeze or unfreeze the picture:
•
Press the FREEZE button.
2 Press the
or
button repeatedly to
Setting the clock
highlight Setup, the press the OK or button
to open the Setup menu.
You can automatically set the clock from a digital
3 Press the
or
button repeatedly to
channel signal. Your TV searches for a digital
channel that has time information encoded. If the
clock is not correct after you automatically set it,
you can manually set the clock.
highlight DTV Signal, then press the OK or
button. Your TV displays the DTV signal
strength.
Automatically setting the clock
To automatically set the clock:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Feature, then press the OK or
button to open the Feature menu.
3 Press the
or
button repeatedly to
highlight Time Set, then press the OK or
button to open the Time Set menu.
Adding a channel label
To add a label to a channel:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Setup, then press the OK or
4 Press the
or
button repeatedly to
button to open the Setup menu.
highlight Time Set Mode, then press the OK
or button to select Auto.
3 Press the
or
button repeatedly to
highlight Channel Labels, then press the OK
or button to open the Channel Labels
menu.
5 Press the
or
button repeatedly to
highlight Time Zone, then press the OK or
button to select a time zone: Pacific, Alaska,
Hawaii, Eastern, Central, or Mountain.
6 Press the EXIT button to close the on-screen
menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Manually setting the clock
Viewing closed captions
You can view closed captions in two modes:
CAPTION and TEXT. Each mode has four
channels. CAPTION mode shows dialogue and
commentaries for TV programs while providing a
clear picture of the program. TEXT mode shows
information not related to the program, such as
TV program schedules and weather forecasts. In
TEXT mode, part of picture may be covered by
the text.
To manually set the clock:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Feature, then press the OK or
button to open the Feature menu.
3 Press the
or
button repeatedly to
highlight Time Set, then press the OK or
button to open the Time Set menu.
4 Press the
or
button repeatedly to
Note
highlight Time Set Mode, then press the OK
or button to select Manual.
For digital broadcast systems, you can press the
CCD button on the remote control to select the
closed caption mode.
To customize digital closed captions, use the
Closed Caption Options sub-menu in the Feature
menu.
To view closed captions:
•
Press the CCD button repeatedly to select a
closed caption mode. You can select:
•
•
•
•
•
•
•
•
•
CC1
CC2
CC3
CC4
TEXT1
TEXT2
TEXT3
TEXT4
Off
5 Press the
or
button to select Year,
Date, or Time, then press the OK, , or
button to set the year, date, or time.
6 Press the EXIT button to close the on-screen
menu.
Setting the sleep timer
The sleep timer lets you select the amount of
time before your TV turns off automatically.
Setting parental controls
To set the sleep timer:
1 Press the MENU button.
Your TV has a V-chip that lets you control the
type of programs your children can watch.
Parental controls include two ratings: MPAA
(based on age) and TV Parental Guidelines
(based on content and age). A TV program may
have an MPAA or TV Parental Guidelines rating,
so you should set controls for both ratings.
2 Press the
or
button repeatedly to
highlight Feature, then press the OK or
button to open the Feature menu.
Before you can select ratings, you need to set up
a parental controls password.
To set up a password:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Feature, then press the OK or
button to open the Feature menu.
3 Press the
or
button repeatedly to
highlight Parental Control, then press the
OK or button to open the Parental Control
menu.
3 Press the
or
button repeatedly to
highlight Sleep Timer, then press OK or
button to select the amount of time. To turn
off the timer, select Off.
Note
You can also press the SLEEP button to set the
sleep timer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
TV Parental Guidelines ratings
4 Press the
or
button repeatedly to
highlight Password Change, the press the
OK or button to access the Password
Change option.
Rating
Description
NONE
TV-Y
Not rated.
All children.
TV-Y7
TV-G
Children over seven years of age.
General audiences.
TV-PG
TV-14
TV-MA
Parental guidance suggested.
Parents strongly cautioned.
Mature audiences only.
5 Press the number buttons to enter the old
password. If you have not set a password,
enter 0000.
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
Rating
Description
FV
L
Fantasy violence.
Adult language.
6 Press the number buttons to enter a new
password, then enter the new password
again to confirm.
S
Sexual situations.
Violence.
V
D
Sexually suggestive dialog.
To set the ratings:
1 Press the MENU button.
2 Press the
or
button repeatedly to
highlight Feature, then press the OK or
button to open the Feature menu.
3 Press the
or
button repeatedly to
highlight Parental Control, then press the
OK or button to open the Parental Control
menu.
Caution
4 Press the
or
button repeatedly to
Write down your password and save it for future
use.
highlight Parental Control Set, then press
the OK or button to access the rating
feature.
Note
If you forget your password, enter 1397 for the old
password, then enter a new password. This
password always remains valid for resetting your
password.
MPAA ratings
5 Enter the password.
Rating
Description
Note
NONE
G
Not rated.
General audiences.
PG
Parental guidance suggested. Some
material may not be suitable for
children.
6 Press the
or button to select a
rating, then press the OK button to block or
unblock the rating.
PG-13
R
Parental guidance strongly suggested.
Some material may not be suitable for
children under 13 years of age.
Restricted. Not suitable for children
under 17 years of age unless
accompanied by a parent or guardian.
NC-17
X
Not suitable for children under 17
years of age.
Adults only.
When you block a rating, that rating and all
higher ratings are blocked.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Using the on-screen menu
On-screen menus
Your TV has an on-screen menu that lets you
adjust TV settings, such as video and audio
settings.
On-screen
Options
menu
Video
Picture Mode–Selects the picture mode: User,
To use the on-screen menu:
1 Press the MENU button.
Nature, Soft, or Bright. You can also press the
(Options may vary
in different
modes.)
PICTURE button to select the picture mode.
2 Press the
or
button repeatedly to select
Contrast–Increases the picture level to adjust
the white areas of the picture. Decreases the
picture level to adjust the black areas of the
picture.
Brightness–Increases the brightness to add
more light to dark areas of the picture.
Decreases the brightness to add more dark to
light areas of the picture.
a menu.
3 Press the
or button to navigate to
an option or adjust an option.
Color–Adjusts the overall color of the picture.
Sharpness–Increases the sharpness level to
show cleaner and clearer images. Decreases
the level to show a smoother picture.
Aspect Ratio–Selects the screen aspect ratio:
Wide, Cinema, Normal, or Zoom. You can also
press the ZOOM button to select the aspect
ratio.
Advanced Video Menu–Provides access to
advanced features:
• Noise Reduction–Reduces picture
noise (snow).
• Tint–Increases the color level to add
more green to skin tones. Decreases the
color level to add more purple to skin
tones.
• Color Temperature–Selects one of
three automatic color adjustments: Cool
for more blue, Warm for more red, and
Normal.
• 3D Y/C–Turns the 3D comb filter on or
off.
VGA Set/Component Set–If your TV is
connected to a computer or to component
video, adjusts the following options:
4 Press the OK or button to confirm an
adjustment, open a sub-menu, or toggle a
setting.
• H-Pos–Adjusts the horizontal position
of the image.
• V-Pos–Adjusts the vertical position of
the image.
• Clock–Adjusts the sample frequency.
• Phase–Improves the focus of a stable
image.
• Setting–Resets VGA mode to the
factory defaults.
5 Press the MENU button to return to a
previous menu or press the EXIT button to
close the on-screen menu.
Audio
Sound Mode–Selects the sound mode: User,
News, Music, or Movie. You can also press the
AUDIO button to select the sound mode.
Bass–Adjusts the low sounds (bass).
Treble–Adjusts the high sounds (treble).
(Options may vary
in different
modes.)
Balance–Adjusts the right and left speaker
volumes.
Earphone Vol–Adjust the earphone volume.
Digital Audio Output–Selects the audio mode
for the S/PDIF jack.
• RAW: AC-3 in - AC-3 out/PCM in- PCM
out.
• PCM (Pulse Code Modulation): AC-3 in
- PCM out/PCM in - PCM out.
MTS–Selects the multi-channel TV sound
(MTS): Mono, Stereo, or SAP (second audio
program). You can also press the MTS/SAP
button to select the MTS mode.
Audio Language–Selects an alternate language
if the program has more than one language.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
5 Enter the first five-digit code for your device.
The LED blinks once as each digit is entered.
If the code is correct, the LED blinks twice.
On-screen
menu
Options
Setup
Tuning Band–Selects the TV signal source. For
Note
If the LED does not blink twice, repeat Steps 3
through 5 using a different code.
DTV Signal–Displays the digital TV signal
Auto Ch Search–Automatically sets up a list of
the channels available in your area. For more
Manual Ch Set–Lets you add or delete
channels from the channel list. For more
Channel Labels–Lets you add a label to a
6 Aim the remote at the device, then press the
button. The device should turn off.
Note
If the device does not turn off, repeat Steps 4
through 6 using a different code. If you cannot find
7 Repeat Steps 1 through 6 to program
additional devices.
8 Press the SET button to save the code and
exit.
Feature
Source–Selects the video source. You can
select:
Note
• TV
For future reference, write down each working
code.
• Composite1
• Composite2
• Component1
• Component2
• VGA
Searching for a code
To search for a code:
1 Press a device key.
• HDMI
• S-Video
You can also press the INPUT button to select
the video source.
2 Press and hold the SET button until the LED
blinks twice, the release the button.
Time Set–Sets the clock. For more
Sleep Timer–Sets the sleep timer. For more
Parental Control–Accesses V-chip controls.
Closed Caption Options–Customizes closed
captions for digital broadcasting systems. You
can adjust Size, Font, Text Color, Text Opacity,
Background Color, Background Opacity, Edge
Effect, and Edge Color.
3 Enter 991, then the device group number
(0=cable, 1=TV, 2=VCR, 3=audio). The LED
blinks twice.
4 Aim the remote control at the device, then
press the
go to Step 7.
button. If the device responds,
5 If the device does not respond, press the
CH+ button. Your remote control will try the
next code. Keep pressing the CH+ button
until the device responds. You can press the
CH– button to try a previous code.
6 To search for a code for another device,
CC when Mute–Automatically displays closed
captions when the volume is muted.
repeat Steps 1 through 5.
Menu Language–Selects the language for the
on-screen menu. You can select English,
French, or Spanish.
7 Press the SET button to save the code and
exit.
Checking the code
Programming the remote control
If you programmed a device by searching for a
code, you may want to know what four-digit code
the remote is using.
Programming a device connected to your TV
The remote control can control four devices,
such as a VCR, DVD player, cable or satellite
receiver, amplifier or tuner, or similar device.
To check the code:
1 Press the device button on the remote
control.
To program the remote control:
2 Press and hold the SET button until the LED
1 Find the code for the device you want to
of codes. If there is more than one code listed
for a device, write down all of the codes.
blinks twice, then release the button.
3 Enter 990. The LED blinks twice.
4 Press 1 and count the LED blinks. This is the
first digit of the code (for example, if the LED
blinks twice, the first digit is 2. If the LED
does not blink, the first digit is 0).
2 Turn on the device you want to program, and
load media if required (for example, a DVD).
3 Press a device key on the remote control (for
example, DVD, CBL, or AUX).
5 Repeat Step 4 using 2 for the second digit, 3
for the third digit, 4 for the fourth digit, and 5
for the fifth digit.
4 Press and hold the SET button on the remote
control until the LED blinks twice, then
release the button.
6 Press the SET button to exit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Programming the volume lock
Troubleshooting
The remote control comes preset to let you
control the volume of each connected device.
You can change the volume lock so that one
device’s volume controls the volume in all
modes.
Warning
Do not try to repair your TV yourself. Refer all
service to a qualified service technician.
After you lock the volume control, you can unlock
the volume control for a specific device so you
can control the volume for that device
independently.
Symptom
Possible solution
No power
• Make sure that the power cord
is connected to your TV and a
power outlet.
To lock the volume control to one device:
• Unplug the power cord, wait 60
seconds, then plug the cord
back in and turn on your TV.
1 Press and hold the SET button until the LED
blinks twice, then release the button.
2 Enter 993, then press the device button for
the device you want to control the volume.
The LED blinks twice. When you press the
VOL+, VOL–, or MUTE button on the remote
control, the device you selected controls the
volume regardless of which device you are
using.
No picture
• Make sure that the video cables
are connected securely to the
back of your TV.
• Adjust the contrast and
brightness.
• Make sure that the correct
video mode is selected.
• Make sure that the incoming
signal is compatible.
To unlock the volume control:
Good picture but no
sound
• Increase the volume.
• Make sure that the sound is not
muted.
• Make sure that the correct
audio mode is selected.
1 Press and hold the SET button until the LED
blinks twice, then release the button.
2 Enter 993, then press the VOL+ button. The
LED blinks four times. The volume control is
unlocked.
Good sound but poor
color
• Adjust the contrast, color, and
brightness settings.
To unlock a single device’s volume control:
1 Press the device key.
Poor picture
• Make sure that the room is not
too bright. Light reflecting off
the screen can make the picture
difficult to see.
• If an S-VHS camera or a
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
2 Press and hold the SET button until the LED
blinks twice, then release the button.
3 Enter 993, then press the VOL– button. The
LED blinks four times. The volume control for
the device you selected is unlocked.
Maintaining
Horizontal dotted line
• Your TV may be too close to
another electrical device, such
as a hair dryer or neon light.
Turn off the device or move
your TV.
•
Do not use your TV in areas that are too hot
or too cold, because the cabinet may warp or
the screen may malfunction.
•
Storage temperatures are 32° to 122°F
(0° to 50°C).
Remote control does not
work
• Press the TV button.
• Replace the batteries. Make
sure that the + and – symbols
on the batteries align with the +
and – symbols in the battery
compartment.
•
Working temperatures are 41° to 104°F
(5° to 40°C).
•
Do not place your TV in direct sunlight or
near a heat source.
• Clean the remote sensor on the
front of your TV.
• Bright or fluorescent lighting
may interfere with the remote
control signal. Turn off the light
or move your TV.
Cleaning your TV
Clean the screen and cabinet with a soft,
lint-free cloth. If the screen or cabinet is
especially dirty, moisten a soft, lint-free cloth in a
weak detergent solution, squeeze the excess
moisture from the cloth, then wipe the screen or
cabinet with the cloth. Use a clean cloth to dry
the screen or cabinet.
Snowy picture or noise
• Make sure that the A/V cables
are connected correctly and
securely.
VGA picture is not stable
or synchronized
• Make sure that you have
selected the correct VGA mode
on your computer.
Caution
Avoid the following, because it may cause damage
to your TV:
No output from one of
the speakers
• Adjust the balance in the Sound
•
•
•
Cleaning your TV with volatile substances,
such as insect sprays, solvents, and thinners.
Leaving items made from rubber or PVC in
contact with your TV for long periods.
Letting liquids drip into the cabinet
menu.
Control buttons do not
work
• Unplug the power cord, wait
few seconds, then plug the cord
back in and turn on your TV.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Symptom
Possible solution
Appendix
After images appear
• Do not display a still image,
such as a logo, game, or
Audio amplifier codes
computer image, for an
Bose
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
extended period of time. This
can cause a permanent after
image to be burned into the
screen. This type of damage is
not covered by your warranty.
GE
JVC
Marantz
Nakamichi
NEC
TV makes snapping
sounds
• Snapping sounds occur when
your TV’s cabinet expands or
contracts from variations in
temperature. This is not a
malfunction.
Optimus
Realistic
Sansui
Shure
Remote Control
LED does not blink when Replace the batteries.
a button is pressed
Sony
LED blinks when a
button is pressed, but
device does not respond and that you point the remote control
at the remote sensor on the device.
Make sure that you are no more than
15 feet (4.6 meters) from the device
Soundesign
Victor
Wards
Yamaha
LED stays on
You pressed an incorrect button. Start
the procedure over again.
Remote control does not Make sure that the device has a remote
control a device or only sensor, then try another code.
controls some features
Audio amp/tuner codes
of the device
ADC
30531
Aiwa
31405, 31243, 30121
Anam
31609, 31074
Specifications
Audiotronic
Bose
31189
•
Design and specifications are subject to
change without notice.
31229
Capetronic
Carver
30531
•
Weight and dimensions listed are
approximate.
31189
Coby
31263
Power supply
AC 100-240 V 50/60 Hz
200 W
Denon
31360, 31142, 30904
Power
consumption
Fonmix
Glory Horse
Harman/Kardon
Hitachi
Inkel
31360
Screen
37-inch
31263
Channel coverage VHF: 2-13
UHF: 14-69
30110
31273
CATV: 1-125
CADTV: 1-135
30027
DTV: 2-69
Integra
JBL
30135
Weight
70.4 lbs. (31.93 kg)
30110
Dimensions
W×H× D
37.2 × 28.9 × 12.2 inches
JVC
30074, 31263
31313, 31570, 30027
31428
(944.9 ×734.1 ×309.9 mm)
Kenwood
KLH
Temperature
Storage - 32° to 122°F (0° to 50°C).
Working - 41° to 104°F (5° to 40°C).
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
TV system
NTSC-M, ATSC
Accessories
User guide
Remote control
Batteries (2 AA)
Onkyo
30842, 30135
31023, 30670, 30531, 31074
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
Optimus
Panasonic
Philips
Pioneer
Proscan
Qisheng
Quasar
31609
30039
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
RadioShack
RCA
31263
Samsung
00000, 00144
31023, 31609, 31254, 30531, 31074
Scientific Atlanta 01877, 00877, 00477, 00008
Sharper Image
Silsonic
Sony
31263
Sony
01006
30176
Starcom
Supercable
Supermax
Tocom
Torx
00003, 00014
00276
31258, 31759
30670
Soundesign
Stereophonics
Sunfire
00883
31023
00012
31313
00003
Teac
31074, 31267
31308, 31518, 30039
31189
Toshiba
Trans PX
Tristar
00000
Technics
Thorens
Victor
00276
00883
30074
TS
00003
Wards
30014
V2
00883
Yamaha
30176, 31276, 31176
Viewmaster
Vision
00883
00883
Vortex View
Zenith
00883
Cable converter codes
00000, 00525, 00899
ABC
00003, 00008, 00014
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Daeryung
Digi
00899
CD player codes
00014
00899
Aiwa
30157
00883
Burmester
30420
30029
00883
California Audio
Labs
00883
Carver
Denon
DKK
30157, 30179
30873
01877, 00877, 00477, 00008
00637
30000
Director
Dumont
Gehua
00476
DMX Electronics 30157
00637
Dynamic Bass
Fisher
30179
00476
30179
General
Instrument
00476, 00810, 00276, 00003, 00014
Garrard
30420
GoldStar
Hamlin
Hitachi
Jerrold
00144
Genexxa
Harman/Kardon
Hitachi
30032
00009, 00273
00014
30157, 30173
30032
00476, 00810, 00276, 00003, 00012,
00014
Integra
30101
JVC
30072
KNC
00008
Kenwood
30826, 30626, 30028, 30037, 30036,
30190
LG
00144
Memorex
Motorola
MultiVision
Pace
00000
Krell
30157
00476, 00810, 00276, 01254, 01376
Linn
30157
00012
Magnavox
Marantz
MCS
30157
01877, 00237
00000, 00008, 00107
00637
30626, 30029, 30157
30029
Panasonic
Panther
Paragon
Philips
Miro
30000
00000
Mission
MTC
30157
00317, 01305
01877, 00877, 00144, 00533
00000
30420
Pioneer
Pulsar
NSM
30157
Onkyo
Optimus
30868, 30101
Quasar
RadioShack
Regal
00000
31063, 30000, 30032, 30037, 30420,
30179, 31075, 30145
00883
Panasonic
Parasound
Philips
30029
00279, 00273
00000
30420
Runco
30626, 30157
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Pioneer
Polk Audio
Proton
QED
31063, 31062, 30032
Go Video
20744, 20833, 21099, 20783, 21075,
20869, 21730
30157
Greenhill
Harman/Kardon
Hitachi
20717
30157
20582, 20702
30157
20573, 20664, 21919
Quad
30157
Hiteker
20672
Quasar
RadioShack
RCA
30029
Initial
20717
31075
Integra
JBL
20627, 21924
31062, 30032, 30420, 30179, 30053
20702
Realistic
Rotel
30420, 30179
30157, 30420
30157
JVC
20558, 20623, 20867
Kenwood
KLH
20490, 20534
SAE
20717, 21020, 21149
Sansui
30157
Koss
20651, 21980
Sanyo
30179
Lasonic
LG
20798
SAST
30157
20591, 20869, 20801
Sharp
30861, 30037
30888, 30036
30157
Liquid Video
Lite-On
Loewe
21980
Silsonic
Sonic Frontiers
Sony
21158, 21058
20511
30490, 30000, 30100
30145
Magnavox
Marantz
Memorex
Microsoft
Mintek
20503, 20539, 21976, 21914, 20675
Soundesign
TAG McLaren
Tascam
Teac
20539
30157
20695
30420
20522
30420
20717
Technics
Victor
30029
Mitsubishi
Nesa
21521, 20521
30072
20717
Wards
30157, 30053
30888, 30036
30157
Norcent
Onkyo
21003
Yamaha
Zonda
20503, 20627, 21924, 20792
Oritron
Panasonic
Philips
20651, 21980
20490, 21762, 21990
DVD player codes
20503, 20539, 20646, 21914
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
20525, 20571
Aiwa
20641, 21912
21086, 21061
Akai
20770
20869
20539
Allegro
Apex Digital
20770
20672, 20717, 20797, 21061, 20796,
21056, 21937, 20794, 21020, 21915
20522
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
20717
20651
20571
20522, 20571, 20717, 20822
20695
Rio
20869
20627, 21061
Rotel
20623
20869
Sampo
Samsung
Sansui
20752, 20698
21086
20490, 20573, 21932, 21075, 20820
Curtis Mathes
CyberHome
Daewoo
21087
20695
21024, 21023, 21129, 20816, 21117
Sanyo
20695
20833, 21172, 20869
20490
Sharp
20630, 20752
Denon
Sharper Image
Sherwood
Shinco
21117
DVD2000
Emerson
Enterprise
Fisher
20521
20770
20591, 20675
20591
20717
Shinsonic
Sonic Blue
Sony
20533
21919
20869, 21099
Funai
20675
20533, 20864, 21033, 21904, 21903
Gateway
GE
21158, 21073
20522, 20717
SVA
20717
20675
Sylvania
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Symphonic
Teac
20675
Sony
00639, 01640
00869
20717, 21984, 20809
20490
Star Choice
Tivo
Technics
Theta Digital
Toshiba
01142, 01442
00749, 01749, 00790, 01285
01640, 01392
00724, 00722
01535
20571
Toshiba
Ultimate TV
Uniden
US Digital
USDTV
Voom
20503, 20695
20503
Urban Concepts
Xbox
20522
Yamaha
20490, 20539, 20545
20503, 20591, 20869
01535
Zenith
00869
Zenith
00856, 01856
Satellite receiver codes
VCR codes
AlphaStar
Chaparral
Crossdigital
DirecTV
00772
00216
01109
ABS
21972
Admiral
20048, 20209
00392, 00566, 00639, 01142, 00247,
00749, 01749, 00724, 00819, 01856,
01076, 01109, 00099, 01392, 01640,
01442, 01414, 01108
Aiko
20278
Aiwa
20037, 20479
Alienware
America Action
American High
Amoisonic
Anam
21972
Dish Network
System
01005, 00775, 01505
20278
20035
Dishpro
Echostar
Expressvu
GE
01005, 00775, 01505
01005, 00775, 01505
00775
20479
20162, 20037, 20240, 20278
Anam National
Asha
20162
00566
20240
General
Instrument
00869
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
20037, 20278
20240
GOI
00775
20104
Goodmans
Hisense
Hitachi
HTS
01246
20184, 20121, 20209, 20002, 20479
01535
20037
00819, 00222, 01250
00775
Canon
20035
Carver
20081
Hughes Network 01142, 00749, 01749, 01442
Systems
CCE
20072, 20278
20048, 20081
20037, 20278
20072
I-Lo
01535
Changhong
Citizen
JVC
00775
LG
01414, 01226
00724, 00722
00724
Colt
Magnavox
Memorex
Mitsubishi
Motorola
NEC
Craig
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
00749
00869
21972
01270
20045, 20104, 20278
21972
Next Level
Panasonic
Paysat
00869
00247, 00701
00724
Denon
20042
DirecTV
Durabrand
Electrohome
Electrophonic
Emerex
20739
Philips
01142, 00749, 01749, 00724, 01076,
00722, 00099, 01442
20039, 20038
20037
Proscan
Proton
RadioShack
RCA
00392, 00566
20037
01535
20032
00869
Emerson
20035, 20037, 20184, 20240, 20045,
20121, 20043, 20209, 20002, 20278,
20479
00392, 00566, 00855, 00143, 01392
Samsung
Sanyo
01276, 01109, 01108
01219
Fisher
Fuji
20047, 20104
20035, 20033
SKY
00856
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Fujitsu
20045
Orion
20184, 20209, 20002, 20479
Gateway
GE
21972
Panasonic
Penney
Pentax
Philco
21062, 20035, 20162, 20616, 20225
20060, 20035, 20240
20035, 20037, 20240, 20042, 20038
General
20045
20042
Go Video
GoldStar
Haojie
20432
20035, 20479
20037, 20209, 20038, 20225
Philips
Pilot
20035, 20081, 20739, 20618
20240
20037
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
20081, 20038
20072
Pioneer
Polk Audio
Profitronic
Proscan
Protec
20042, 20067
20081
21972
20240
20047
20060
Hitachi
20037, 20042, 20055
21972
20072
Howard
Computers
Pulsar
20039
Qisheng
Quasar
Radix
20060
HP
21972
20035, 20162
Hughes Network 20042, 20739
Systems
20037
Randex
RCA
20037
iBUYPOWER
JVC
21972
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
20045, 20067
20037, 20278
20067, 20038
20072
Realistic
ReplayTV
Runco
KEC
Kenwood
KLH
20039
Sampo
Samsung
Sanky
20037, 20048
Kodak
Kolin
20035, 20037
20240, 20045, 20432
20048, 20039
20043, 20037, 20045, 20042, 20209,
20038
Logik
20072
Sansui
Sanyo
20067, 20209, 20479
20047, 20240, 20104
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
LXI
20037
Magnavox
Magnin
Marantz
Marta
20035, 20039, 20081
20240
Scott
Sears
20035, 20081
20037
Sharp
Shintom
Shogun
Singer
20072
Matsushita
20035, 20162
20240
Media Center PC 21972
20072
MEI
20035
Sonic Blue
Sony
20616
Memorex
20035, 20162, 20037, 20048, 20039,
20047, 20240, 20104, 20209, 20479
20035, 20032, 20033, 20636, 21972
20042
STS
MGA
20240, 20043
Sylvania
Systemax
Tagar Systems
Tashiko
Tatung
Technics
Teco
20035, 20081, 20043
21972
MGN Technology 20240
Microsoft
Mind
21972
21972
21972
20037
Minolta
Mitsubishi
Motorola
MTC
20042
20045, 20067
20067, 20043
20035, 20048
20240
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
Teknika
Tivo
Multitech
NEC
20072
20636, 20618, 21503, 20739
20240
20035, 20037, 20048, 20104, 20067,
20038
TMK
Toshiba
20045, 20042, 20067, 20043, 21503,
21008, 21972
Newave
Nikko
20037
20037
20240
21972
20035
Totevision
Touch
20037, 20240
21972
Noblex
Northgate
Olympus
Optimus
Unitech
20240
Vector
20045
21062, 20162, 20037, 20048, 20104,
20432
Vector Research
20038
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
Victor
20067
20045
20037
20240
21972
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
20060, 20035, 20048, 20047, 20081,
20240, 20042, 20072
White
Westinghouse
20209, 20072
XR-1000
Yamaha
Zenith
20035, 20072
20038
20039, 20033, 20209, 20479
21972
ZT Group
Legal notices
Copyright
© 2006 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or
registered trademarks of their respective holders.
Specifications and features are subject to change
without notice or obligation.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES
FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THE WARRANTY PERIOD. SOME STATES,
PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Warranty
1-year limited warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new 37” LCD TV (“Product”), that the
Product shall be free of defects in the original manufacture of
the material or workmanship for a period of one (1) year from
the date of your purchase of the Product (“Warranty Period”).
This Product must be purchased from an authorized dealer
of Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished
Product. If you notify Insignia during the Warranty Period of a
defect covered by this warranty that requires service, terms
of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date
you purchased the Product. The purchase date is printed on
the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product
at no charge with new or rebuilt comparable products or
parts. Products and parts replaced under this warranty
become the property of Insignia and are not returned to you.
If service of Products or parts are required after the Warranty
Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage terminates if
you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take
your original receipt and the Product to the store you
purchased it from. Make sure that you place the Product in
its original packaging or packaging that provides the same
amount of protection as the original packaging. If you
purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the
web site. Make sure that you put the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States and Canada.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the
antenna
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has
been altered or removed
•
•
•
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-37LCD 37” LCD TV
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Respecter les avertissements et les
instructions
Respecter tous les avertissements sur cet
appareil ainsi que dans les instructions
d’utilisation. Toutes les instructions d’utilisation
et de fonctionnement doivent être observées.
Téléviseur ACL de 37
po Insignia
Eau et humidité
NS-37LCD
Ne pas utiliser cet appareil près de l’eau. Par
exemple près d’une baignoire, un lavabo, un
évier ou un baquet à linge, dans un sous-sol
humide ou près d’une piscine.
Table des matières
Nettoyage
Débrancher l'appareil avant tout nettoyage. Ne
pas utiliser de nettoyant liquide ou en aérosol.
Utiliser un chiffon à poussière pour nettoyer
l’extérieur de l’appareil.
Ventilation
Les fentes et ouvertures à l’arrière et au bas du
boîtier sont prévues pour la ventilation, pour
assurer un fonctionnement fiable de l'appareil et
le protéger contre toute surchauffe. Ces
ouvertures ne doivent être ni bloquées ni
obstruées. Elles ne doivent jamais être bloquées
en installant l’appareil sur un lit, un sofa, un tapis
ou toute autre surface semblable. Ne pas placer
l’appareil à proximité ou au-dessus d’un
radiateur ou d’une source de chaleur. Ne pas
installer l’appareil dans un meuble encastré tel
qu’une bibliothèque ou sur une étagère, sauf si
une ventilation adéquate a été prévue ou si les
instructions du fabricant ont été respectées.
Informations sur la sécurité
Avertissement
Afin de réduire le risque de choc électrique, ne pas enlever le
couvercle (ou le panneau arrière). Aucune pièce interne ne
peut être réparée par l'utilisateur. Confier l’entretien à du
personnel qualifié.
Afin de réduire le risque d’incendie et de choc électrique, ne
pas exposer ce téléviseur à la pluie ou l’humidité.
Chaleur
Attention
S’assurer que l’appareil est installé à l’écart de
sources de chaleur, telles que radiateurs,
bouches de chaleur, fours ou autres appareils (y
compris les amplificateurs) qui produisent de la
chaleur.
Pour éviter les chocs électriques, introduire la lame la plus
large de la prise du cordon d’alimentation dans la fente
correspondante de la prise secteur. Si la prise ne s'adapte
pas, contacter un électricien afin qu’il remplace la prise
secteur inadéquate. Ne pas modifier la prise du cordon
d’alimentation, sinon ce dispositif de sécurité serait inopérant.
Mise à la terre ou polarisation
Ne pas chercher à modifier le dispositif de
sécurité de la prise polarisée ou de type mise à
la terre. Une prise polarisée comporte deux
plots, un plus large que l'autre. Une prise de
type mise à la terre est composée de deux plots
et d’un troisième de mise à la terre. Ce troisième
plot, large ou rond a été prévu pour la sécurité
de l’utilisateur. Si la fiche ne s'adapte toujours
pas à la prise secteur, contacter un électricien
afin qu’il remplace la prise inadéquate.
Ce symbole indique qu'une tension
dangereuse, constituant un risque de
choc électrique, est présente dans cet
appareil. Cette étiquette est située à
l’arrière de l’appareil.
Ce symbole indique que d'importantes
instructions concernant le fonctionnement
et la maintenance figurent dans la
documentation qui accompagne cet
appareil.
Protection du cordon d’alimentation
Les cordons d’alimentation électrique doivent
être acheminés afin que personne ne puisse
marcher dessus et qu’aucun objet posé dessus
ne vienne les entraver. Prêter particulièrement
attention aux points de branchement du cordon
à la prise secteur et à l’endroit d’où le cordon
sort de l’appareil.
Avertissement
Cet appareil utilise de la soudure étain-plomb et une lampe
fluorescente contenant une petite quantité de mercure. La
mise au rebut de ces matériels peut faire l'objet d'une
réglementation relative à l’environnement. Pour des
informations de mise au rebut ou de recyclage, contacter les
autorités locales ou l’Electronic Industries Alliance sur le site
Pièces jointes
Ne pas utiliser de périphériques non
recommandés par Insignia, car ils pourraient
être source de dangers.
Lire les instructions
Lire toutes les instructions de sécurité et
d’utilisation avant d’utiliser cet appareil.
Support
Conserver les instructions
Conserver les instructions de sécurité et de
fonctionnement pour toute référence ultérieure.
Ne pas placer cet appareil sur une table
roulante, un pied, un trépied, un support ou une
table instables. L’appareil pourrait tomber et
provoquer dans sa chute des blessures et subir
de graves dommages. N’utiliser qu’avec la table
roulante, le pied, le trépied, le support ou la table
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
recommandés par le fabricant ou vendus avec le
téléviseur. Pour installer l’appareil sur un support
mural, observer les instructions du fabricant et
utiliser un accessoire de montage recommandé
par celui-ci. Si l’appareil est installé sur un
meuble à roulettes, déplacer l’ensemble avec
précaution. Un arrêt brusque, l’utilisation d’une
force excessive et des surfaces irrégulières
risquent de déstabiliser l’ensemble et de le
renverser.
•
Si l'appareil présente une détérioration
marquée de ses performances.
Pièces de rechange
Si des pièces doivent être remplacées, s’assurer
que le technicien a utilisé des pièces de
rechange spécifiées par le fabricant qui ont les
mêmes caractéristiques que les pièces d’origine.
Toute substitution par des pièces non autorisées
risque de provoquer un incendie, un choc
électrique, des blessures ou d'autres dangers.
Foudre
Contrôle de sécurité
Pour protéger l’appareil pendant un orage ou s’il
se trouve inutilisé et sans surveillance pendant
une période prolongée, le débrancher de la prise
secteur et débrancher l'antenne ou la connexion
au réseau câblé. Ceci évitera d’endommager
l’appareil en cas de foudre et de variations de
tension du secteur.
Après toute opération d’entretien ou réparation
de cet appareil, demander au technicien
d’effectuer les contrôles de sécurité de routine
pour vérifier qu’il fonctionne correctement.
Source d’alimentation
Cet appareil doit fonctionner conformément à la
source d’alimentation indiquée sur les
étiquettes. En cas d’incertitude sur la tension
d'alimentation électrique de la maison, consulter
le revendeur du téléviseur ou la compagnie
d'électricité.
Entretien
L’utilisateur ne doit pas essayer de réparer cet
appareil lui-même, en effet son ouverture ou le
démontage des couvercles peut l’exposer à des
tensions dangereuses et à d'autres dangers.
Toutes les réparations doivent être réalisées par
du personnel qualifié.
Protection de l’écran
L’écran du téléviseur est en verre. Ne pas laisser
tomber l’appareil ou heurter l’écran en verre. Si
l’écran se brise, prendre garde à ne pas se
blesser avec les morceaux de verre.
Pièces de rechange
Si des pièces doivent être remplacées, s’assurer
que le technicien a utilisé des pièces de
rechange spécifiées par le fabricant qui ont les
mêmes caractéristiques que les pièces d’origine.
Toute substitution par des pièces non autorisées
risque de provoquer un incendie, un choc
électrique, des blessures ou d'autres dangers.
Pixels défectueux
L’écran de cet appareil est conçu pour afficher
des images fines détaillées. Il peut arriver que
certains pixels non actifs apparaissent sur
l’écran sous forme de points fixes bleus, verts ou
rouge. Ceci est normal et n’affecte pas la
performance de l’appareil.
Surcharge
Les prises secteur et les rallonges ne doivent
pas être surchargées, cela pourrait provoquer
des risques d'incendie ou de choc électrique.
Mise à la terre d’une antenne externe
Si cet appareil est connecté à une antenne
extérieure ou à un réseau câblé, vérifier que
l'antenne ou la connexion au réseau câblé est
mis à la terre afin de bénéficier d'une certaine
protection contre les sautes de tension et les
charges électrostatiques. L'article 810 du Code
national de l’électricité (CNE), ANSI/NFPA Nº
70, fournit des informations relatives à la mise à
la terre correcte du mât et du support, la mise à
la terre du fil conducteur de l’antenne à l’unité de
décharge de l’antenne, la taille des conducteurs
de mise à la terre, l’emplacement de l’unité de
décharge de l’antenne, la connexion aux
conducteurs de terre ainsi que les normes en
matière de prise de terre.
Pénétration d’objets ou de liquides
N’enfoncer en aucun cas un objet dans les
ouvertures de l’appareil car il pourrait entrer en
contact avec des tensions dangereuses ou
provoquer un court-circuit à l'origine d'un
incendie ou d'un choc électrique. Ne jamais
répandre un liquide sur le téléviseur.
Dégâts nécessitant un entretien
Débrancher l’appareil de la prise secteur et
utiliser les services d’un technicien qualifié dans
les conditions suivantes :
•
•
•
•
Lorsque le cordon d’alimentation est
effiloché ou la prise endommagée.
Si un liquide a été répandu ou des
objets sont tombés dans l’appareil.
Si l’appareil a été exposé à la pluie ou
à l’eau.
Si l’appareil fonctionne anormalement
en appliquant les instructions
d’utilisation. Ne régler que les
commandes décrites dans les
instructions d’utilisation ; en effet, le
réglage incorrect d’autres commandes
pourrait provoquer des dégâts,
entraînant souvent d'importantes
réparations par un technicien qualifié
pour rétablir le fonctionnement normal
de l’appareil.
7
6
5
4
3
1
2
1
2
Équipement de la compagnie d'électricité
Système de mise à la terre des électrodes
de la compagnie d’électricité
•
Si le téléviseur est tombé ou s’il est
endommagé de quelque façon que ce
soit.
3
Serre-fils de mise à la terre
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Dessus
4
5
6
7
Conducteurs de mise à la terre
Unité de décharge de l’antenne
Serre-fil de mise à la terre
Fil conducteur de l’antenne
Avis à l'installateur de TV câblée
Le présent avis a pour objet de rappeler à
l'installateur de systèmes de télévision par câble
que l'article 820-40 du Code national de
l'électricité contient des recommandations
relatives à la mise à la masse de l'appareil et, en
particulier, stipule que la terre du câble doit être
connectée au système de mise à la terre de
l'immeuble, aussi prêt que possible du point
d'entrée du câble.
1
2
3
4
5
#
Commande Description
1
CH+/CH–
Permet de changer le canal.
Dans le menu d’écran, permet de
sélectionner les menus et les options.
Fonctionnalités
Face avant
2
VOL+/VOL–
Permet d’augmenter ou de diminuer le
volume sonore.
Dans le menu d’écran, permet de régler les
paramètres ou de modifier une valeur.
3
4
MENU
Permet d’accéder au menu d’écran.
ENTRÉE
Permet de sélectionner la source d’entrée
vidéo.
5
Marche/Arrêt Permet d'allumer ou d'éteindre le téléviseur.
Commande
Description
1
2
Témoin de
S'allume quand l’appareil est mis sous
tension.
Marche/Arrêt
Capteur de
télécommande
Reçoit les signaux de la télécommande.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Panneau arrière et panneaux latéraux
arrière
#
Prise
1
Sortie audio numérique S/PDIF
(optique)
2
3
4
5
6
7
8
9
Entrée HDMI
Entrée D-SUB AUDIO
Entrée D-SUB PIC (vidéo)
ENTRÉE À COMPOSANTES Y
ENTRÉE À COMPOSANTES Cb/Pb
ENTRÉE À COMPOSANTES Cr/Pr
ENTRÉE À COMPOSANTES AUDIO D
ENTRÉE À COMPOSANTES AUDIO G
10 Entrée antenne RF
11 Entrée S-VIDÉO
12 ENTRÉE AV VIDÉO
13 ENTRÉE AV AUDIO G
14 ENTRÉE AV AUDIO D
15 Interface de commande RS-232
16 Prise de sortie haut-parleur droite
17 SORTIE AV VIDÉO
18 SORTIE AV AUDIO G
19 SORTIE AV AUDIO D
20 CASQUE D’ÉCOUTE
21 Prise de sortie du haut-parleur gauche
Retirer le
couvercle
des prises
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Télécommande
#
Touche
Description
Remarque
1
2
CONFIGURER
Permet de programmer la
télécommande. Pour toute
information complémentaire, voir «
Pour toute information sur la programmation de la
télécommande, voir « Programming the remote
[Touches pour
périphériques]
TV – Permet de choisir le mode TV.
DVD – Permet de choisir le mode
lecteur de DVD.
CBL – Permet de choisir le mode TV
câblé ou satellite.
AUX – Permet de choisir un
périphérique affecté à cette touche.
3
[Touches
numériques]
Permet de saisir les numéros de
canal.
Dans le menu d’écran, permet de
saisir le mot de passe du contrôle
parental.
4
5
6
ENTRÉE
Permet de sélectionner la source
d’entrée vidéo.
Permet de revenir au dernier canal
visionné.
+ CH –
Permet de changer les canaux de
télévision.
7
8
9
SOURDINE
MENU
Permet de mettre le son en sourdine.
Permet d’accéder au menu d’écran.
Utiliser les flèches directionnelles
pour se déplacer en bas, en haut, à
gauche ou à droite dans le menu
d’écran.
OK
Appuyer sur OK pour confirmer les
changements ou pour activer ou
désactiver les options dans le menu
d’écran.
10
11
Permet d’arrêter momentanément la
lecture d’une cassette vidéo ou d’un
DVD. Appuyer de nouveau sur cette
touche pour reprendre la lecture.*
Permet de commencer
l’enregistrement d’une cassette
vidéo ou d’un DVD.*
12
13
Permet une lecture rapide arrière
d’un DVD ou d’une cassette vidéo.*
Permet de revenir au chapitre
précédent sur un DVD.*
14 MTS/SAP
Permet de sélectionner l’un des
modes audio préréglés. Il est
possible de sélectionner MONO
(Mono), STEREO (Stéréo) ou SAP
(Seconde trame sonore).
15 ZOOM
Permet de modifier le format
d’écran.
16 [Touche
Marche/Arrêt]
17 [Témoin à DEL]
Permet de mettre le téléviseur en
marche ou en mode d’attente.
S’allume lors de la programmation
de la télécommande. Pour toute
information complémentaire, voir «
18
—
Permet de sélectionner un canal
secondaire. Pour toute information
19 + VOL -
20 INFO
Permet de régler le volume.
Permet d’afficher l’information
d’état.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Utilisation de la télécommande
Pour utiliser la télécommande :
#
Touche
Description
21 QUITTER
22
Permet de quitter le menu d’écran.
•
Pointer la télécommande vers le capteur
situé sur la face avant du téléviseur.
Permet de démarrer la lecture d’un
DVD ou CD si un lecteur de DVD ou
de CD est connecté.*
23
Permet d’arrêter la lecture d’un DVD
ou CD si un lecteur de DVD ou de CD
est connecté.*
24
25
Permet l’avance rapide d’une
cassette vidéo ou d’un DVD.*
Permet d’aller au chapitre suivant
sur un DVD.*
26 ARRÊT DIFFÉRÉ Permet de configurer l’arrêt différé
de l’appareil. Pour toute information
27 CCD
Permet d’activer ou de désactiver les
sous-titres codés. Pour toute
information complémentaire, voir «
60°
28 IMAGE
Permet de sélectionner le mode
d’image.
16,4 pi
(5 m)
29 ARRÊT SUR
IMAGE
Permet d’effectuer un arrêt sur
l’image vidéo. Appuyer de nouveau
pour reprendre la lecture. Ne pas
effectuer un arrêt sur l’image vidéo
pendant une durée prolongée.
L’écran du téléviseur pourrait être
endommagé.
Remarques
•
•
•
•
La télécommande ne doit pas recevoir de
chocs ou être exposée à des liquides.
Ne pas utiliser la télécommande dans des
endroits à forte humidité.
Ne pas placer la télécommande sous la
lumière solaire directe.
Ne pas placer d’objets, tels que des meubles,
entre la télécommande et le capteur de
télécommande.
La télécommande peut ne pas fonctionner
correctement si le capteur de l’unité principale
reçoit directement la lumière du soleil ou un
éclairage important. Déplacer le téléviseur ou
modifier l’angle d’utilisation de la
télécommande.
30 AUDIO
Permet de sélectionner le mode
audio.
31 Touches A, B, C,
D, E
Ces touches n’ont aucune
fonctionnalité sur cet appareil.
Toutefois, elles pourraient être
utilisées avec d’autres périphériques
quand cette télécommande est
configurée en tant que
télécommande universelle. Leurs
fonctions exactes dépendent du
périphérique spécifique en cours de
contrôle.
•
* La télécommande doit être programmée pour contrôler et faire
fonctionner un magnétoscope ou lecteur de DVD. Pour toute
information complémentaire, voir « Programming the remote
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Connexion du téléviseur à une prise
secteur
Installation du téléviseur
Installation des piles de la télécommande
Pour installer les piles de la télécommande :
Pour connecter le téléviseur à une prise
secteur :
•
Brancher le cordon d’alimentation sur une
prise secteur.
1 Retirer le couvercle du compartiment des
piles.
Remarques
•
Vérifier que la tension est correcte. Voir
l’étiquette à l’arrière du téléviseur.
Débrancher l’appareil de la prise secteur
lorsqu'il ne doit pas être utilisé pendant une
durée prolongée.
•
Fixation et connexion des haut-parleurs
Pour fixer et connecter les haut-parleurs au
téléviseur :
1 Débrancher le cordon d’alimentation de
l’appareil ainsi que tous les périphériques
connectés à ce dernier.
2 Insérer deux piles AA dans le compartiment.
Veiller à ce que les pôles + et – des piles
coïncident avec les repères + et – figurant à
l'intérieur du compartiment.
2 Connecter chaque haut-parleur et la plaque
fixe au téléviseur à l’aide des vis fournies,
puis serrer les vis.
3 Installer les deux caches de connexion sur
les plaques fixes.
4 Connecter les haut-parleurs aux prises pour
haut-parleurs situées sur les panneaux
latéraux de l’appareil. S’assurer de connecter
les câbles audio des haut-parleurs aux prises
de sortie des haut-parleurs de façon à
correspondre aux symboles + et – de ces
derniers par la couleur.
3 Remettre le couvercle en place.
Plaque fixe
Plaque fixe
Vis
Haut-parleur
Vis
Cache de
connexion
Cache de
connexion
Remarques
•
•
•
•
Ne pas mélanger différents types de piles.
Ne pas mélanger des piles neuves et usagées.
Retirer les piles quand elles sont déchargées.
Les produits chimiques des piles peuvent
provoquer des démangeaisons. Si les piles
fuient, nettoyer le compartiment avec un
chiffon. Si les produits chimiques sont au
contact de la peau, nettoyer immédiatement.
Retirer les piles si la télécommande n’est pas
utilisée pendant une période prolongée.
Connexion d’une antenne externe
Les câbles d’antenne sont de deux types :
75 ohms et 300 ohms.
•
Câble de 75 ohms
Câble de 300 ohms
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
•
•
Si le câble d’antenne utilisé a un connecteur
de 75 ohms, le brancher sur la prise coaxiale
située à l’arrière de l’appareil.
Si le câble d’antenne utilisé a un connecteur
de 300 ohms, le brancher sur un adaptateur
de 300 à 75 ohms (non fourni), connecter
l’adaptateur à un câble de 75 ohms, puis
brancher l’autre extrémité du connecteur de
75 ohms sur la prise coaxiale située à
l’arrière de l’appareil.
Pour le raccordement à la TV câblée avec un
décodeur/décrypteur :
•
Se référer au schéma ci-après pour la
connexion d’un décodeur/décrypteur
(l’interrupteur RF et le répartiteur de signal
ne sont pas fournis).
Régler l’interrupteur RF en position A et
utiliser la télécommande de l’appareil pour
visualiser les canaux « en clair ». Régler
l’interrupteur RF en position B et utiliser les
commandes du décodeur/décrypteur pour
visualiser les canaux brouillés.
Utiliser l’illustration ci-après pour connecter une
antenne extérieure :
Antenne combinée
Répartiteur de signal à
deux voies
Antenne VHF / UHF
Interrupteur RF
Antenne VHF /
UHF
OU
A
B
Câble de 300 ohms
avec adaptateur
Câble de
75 ohms
Out
(Sortie)
In
(Entrée)
TV
Antennes séparées
Décodeur/décrypteur pour la TV câblée
Antenne
UHF
Connexion d’un système audio
Antenne
VHF
Câble
Pour connecter un système audio :
d'antenne
Mélangeur
1 Brancher le câble S/PDIF optique sur la prise
S/PDIF située à l’arrière de l’appareil.
OUT
(Sortie)
OU
IN
(Entrée)
2 Brancher l’autre extrémité du câble S/PDIF
sur une prise d’entrée S/PDIF du système
audio.
Avertissement
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
Remarque
Pour les systèmes de cinéma maison, utiliser un
câble S/PDIF (optique) pour obtenir les meilleures
performances sonores.
Raccordement à la TV câblée
L’appareil est doté d’une prise de 75 ohms pour
le raccordement à la TV câblée.
Certains câblo-opérateurs brouillent les signaux
des canaux par abonnement. Pour visualiser ces
canaux, il faut obtenir un décodeur/décrypteur.
Câble S/PDIF
(optique)
Le raccordement direct à la TV câblée à
l'appareil est possible même sans un
décodeur/décrypteur. Avec un
décodeur/décrypteur, le raccordement à la TV
câblée est possible en utilisant un interrupteur
RF (non fourni). Pour plus d’informations sur la
connexion d’un décodeur/décrypteur, contacter
le câblo-opérateur.
Prise d’ENTRÉE
S/PDIF
Équipement audio
Pour le raccordement à la TV câblée sans
décodeur/décrypteur :
1 Brancher une extrémité d’un câble de
75 ohms sur la prise coaxiale à l’arrière de
l’appareil.
OU
Système stéréo
2 Brancher l’autre extrémité sur la prise secteur
de la TV câblée.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
6 Insérer une cassette vidéo, puis appuyer sur
PLAY (Lecture).
Connexion d’un magnétoscope
Il est possible de connecter un magnétoscope
avec un câble audio/vidéo standard ou un câble
S-Vidéo. Le câble S-Vidéo ne fournit pas de son.
Si un câble S-Vidéo est utilisé, des câbles audio
sont nécessaires pour la connexion de la sortie
audio.
Câble S-Vidéo
TV
OU
Câble vidéo
Avertissement
Câble audio
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
Remarque
Pour obtenir une meilleure vidéo, utiliser la prise
S-Vidéo si le magnétoscope est doté d’une
connexion S-Vidéo.
Y = Jaune (vidéo)
W = Blanc (audio gauche)
R = Rouge (audio droite)
Pour connecter un magnétoscope et lire une
cassette vidéo :
1 Brancher le câble audio/vidéo sur les prises
d’entrée AUDIO L (gauche), AUDIO R
(droite) et VIDEO à l’arrière de l’appareil.
2 Brancher l’autre extrémité du câble
audio/vidéo sur les prises de sortie vidéo et
audio du magnétoscope.
- OU -
Brancher les câbles audio tels que décrit
ci-dessus, puis connecter une extrémité du
câble S-Vidéo à la prise S-Vidéo à l’arrière
de l’appareil et l’autre extrémité à la prise
S-Vidéo du magnétoscope.
Magnétoscope
3 Allumer le téléviseur.
4 Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner Composite1 (ou S-Video
si le magnétoscope est connecté à la prise
S-Vidéo).
5 Mettre le magnétoscope sous tension.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Connexion d’un magnétoscope (pour un
enregistrement)
Connexion d’un amplificateur
Avertissement
S’assurer d’éteindre et de débrancher l’appareil
Avertissement
avant l’installation de périphériques.
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
Pour connecter un amplificateur :
Pour connecter et enregistrer une émission
sur le magnétoscope :
1 Brancher le câble audio/vidéo sur les prises
AUDIO L (gauche), AUDIO R (droite) et
VIDEO à l’arrière de l’appareil.
1 Brancher les câbles audio sur les prises
AUDIO L (gauche) et AUDIO R (droite) à
l’arrière de l’appareil.
2 Brancher l’autre extrémité des câbles audio
sur les prises d’entrée vidéo et audio de
l’amplificateur.
2 Brancher l’autre extrémité du câble
audio/vidéo sur les prises d’entrée vidéo et
audio du magnétoscope.
TV
3 Allumer le téléviseur.
4 Sélectionner l’émission à enregistrer.
5 Mettre le magnétoscope sous tension.
6 Insérer une cassette vidéo, puis appuyer sur
la touche enregistrement du magnétoscope.
HEADPHONE
Y = Jaune (vidéo)
Câble audio
W = Blanc (audio gauche)
R = Rouge (audio droite)
TV
W = Blanc (audio gauche)
R = Rouge (audio droite)
HEADPHONE
Câble audio
Câble vidéo
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Connexion d’un caméscope
Connexion d’un lecteur de DVD
Avertissement
Avertissement
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
Pour connecter et lire une vidéo à partir d’un
caméscope :
Pour connecter un lecteur de DVD et lire un
DVD :
1 Brancher le câble audio/vidéo sur les prises
AUDIO L (gauche), AUDIO R (droite) et
VIDEO à l’arrière de l’appareil.
1 Brancher le câble HDMI sur la prise HDMI à
l’arrière de l’appareil et sur la prise de sortie
HDMI sur le panneau arrière du lecteur de
DVD.
2 Brancher l’autre extrémité du câble
audio/vidéo sur les prises de sortie vidéo et
audio du caméscope.
2 Allumer le téléviseur.
3 Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner HDMI.
3 Allumer le téléviseur.
4 Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner Composite2.
4 Mettre le lecteur de DVD sous tension.
5 Insérer un DVD et appuyer sur Play
5 Mettre le caméscope sous tension et le régler
sur le mode de sortie. Pour plus
(Lecture).
d’informations, se référer au guide de
l’utilisateur du caméscope.
TV
6 Insérer une cassette dans le caméscope et
appuyer sur Play (Lecture).
TV
Y = Jaune (vidéo)
W = Blanc (audio gauche)
R = Rouge (audio droite)
Sortie
HDMI
Câble audio
Câble vidéo
OUT
(Sortie)
IN
(Entrée)
Remarque
Si le lecteur de DVD a seulement une sortie DVI,
utiliser un adaptateur DVI vers HDMI (non fourni)
pour connecter le lecteur de DVD à la prise HDMI
à l’arrière de l’appareil. Puis connecter le câble
audio à la prise D-SUB AUDIO IN (Entrée audio
D-SUB) à l’arrière du téléviseur.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Connexion d’un récepteur TVN
Connexion d’un ordinateur
Avertissement
Avertissement
S’assurer d’éteindre et de débrancher l’appareil
S’assurer d’éteindre et de débrancher l’appareil
avant l’installation de périphériques.
avant l’installation de périphériques.
Pour connecter un récepteur TVN et
visualiser la télévision numérique :
Pour connecter et lire une vidéo à partir d’un
ordinateur :
1 Brancher les câbles audio sur les prises
AUDIO L (gauche) et AUDIO R (droite) à
l’arrière de l’appareil.
1 Connecter le câble audio à la prise d’entrée
audio D-SUB à l’arrière de l’appareil.
2 Brancher l’autre extrémité du câble audio sur
2 Brancher l’autre extrémité des câbles audio
sur les prises de sortie audio du récepteur
TVN.
les prises de sortie audio de l’ordinateur.
3 Connecter le câble D-SUB à la prise d’entrée
PIC à l’arrière de l’appareil.
3 Brancher les câbles vidéo à composantes sur
les prises d’entrée Composante à l’arrière de
l’appareil.
4 Brancher l’autre extrémité du câble D-SUB
sur la prise D SUB de l’ordinateur.
5 Allumer le téléviseur.
4 Brancher l’autre extrémité des câbles vidéo à
composantes sur les prises Composante du
récepteur TVN.
6 Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner VGA.
7 Mettre l’ordinateur sous tension, puis le
régler en mode d’entrée VGA externe. Pour
plus d’informations, se référer au guide de
l’utilisateur de l’ordinateur.
5 Allumer le téléviseur.
6 Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner Composante1.
7 Mettre le récepteur TVN sous tension.
TV
G = Vert (Y)
B = Bleu (Cb/Pb)
R = Rouge (Cr/Pr)
TV
Câbles pour vidéo à composantes
Câble audio
R = Rouge (audio droite)
W = Blanc (audio gauche)
Câble audio
Câble D-SUB
Fonctionnement du
téléviseur
Mise en Marche/Arrêt de l’appareil
Pour mettre le téléviseur sous/hors tension :
1 Vérifier que le cordon d’alimentation est
connecté à l’appareil et à une prise secteur.
2 Appuyer sur la touche
pour mettre
l’appareil en marche.
3 Appuyer de nouveau sur la touche
pour
éteindre l’appareil.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
4 Appuyer sur OK ou pour lancer la
Sélection de la source du signal TV
recherche des canaux.
Pour sélectionner la source du signal TV :
1 Appuyer sur MENU.
Remarque
Appuyer sur Exit (Quitter) pour arrêter la
2 Appuyer plusieurs fois sur
ou
pour
recherche.
sélectionner Setup (Configuration), puis sur
OK ou pour ouvrir le menu Setup
(Configuration).
Ajout ou suppression manuel de canaux de
la liste des canaux
Après avoir créé la liste des canaux à partir de
l’option Recherche automatique des canaux, il
est possible d’ajouter ou de supprimer des
canaux de la liste manuellement.
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Tuning Band (Bande de
syntonisation), puis sur OK ou pour
accéder aux options de bande de
syntonisation.
Pour ajouter ou supprimer des canaux :
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Setup (Configuration), puis sur
OK ou pour ouvrir le menu Setup
(Configuration).
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Manual Ch Set (Configuration
manuelle des canaux), puis sur OK ou pour
accéder aux options de configuration
manuelle des canaux.
4 Sélectionner Air (Réception hertzienne) en
cas de raccordement à une antenne externe,
ou Cable, Cable HRC, Cable IRC ou Cable
Auto pour la TV câblée. Il est recommandé
de sélectionner Cable Auto (Câble
automatique) pour la TV câblée. Pour plus
d’informations sur la sélection de la TV
câblée, contacter le câblo-opérateur.
5 Appuyer sur EXIT (Quitter) pour fermer le
menu d’écran.
Configuration de la liste des canaux
4 Appuyer sur
ou
pour sélectionner un
Après avoir sélectionné la source du signal TV
(antenne ou câble), il est nécessaire de
configurer la liste des canaux. Lors de la
configuration de la liste des canaux, l’appareil
recherche les canaux disponibles localement et
crée une liste de canaux enregistrés. En
appuyant sur la touche
canal, puis sur OK pour ajouter ou supprimer
un canal.
5 Appuyer sur EXIT (Quitter) pour fermer le
menu.
Changement de canal
CH – ou +, le téléviseur saute automatiquement
les canaux qui n'émettent pas de signaux.
Pour changer de canal :
•
Appuyer sur la touche CH – ou + de la
télécommande pour passer à un canal
inférieur ou supérieur.
Configuration automatique des canaux
Pour configurer la liste des canaux
automatiquement :
1 Appuyer sur MENU.
Ou
Utiliser les touches numériques pour
sélectionner un canal (par exemple, pour
sélectionner le canal 83, saisir 8, puis 3).
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Setup (Configuration), puis sur
OK ou pour ouvrir le menu Setup
(Configuration).
Ou
Appuyer sur
canal visionné.
pour retourner au dernier
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Auto Ch Search (Recherche
Sélection d’un canal secondaire
numérique
automatique des canaux).
La plupart des canaux TV numériques
contiennent plus d’un canal. Le canal principal
reçoit le signal pour le programme TV principal.
Les canaux secondaires reçoivent les signaux
pour la programmation supplémentaire ou
alternative, telle que la radiodiffusion ou les
journaux télévisés.
Par exemple, si le numéro de canal principal est
8, les numéros de canal secondaire peuvent être
8-1, 8-2 ou 8-3.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
3 Appuyer plusieurs fois sur ou pour
Pour sélectionner un canal secondaire :
sélectionner DTV Signal (Signal TVN) puis
sur OK ou . Le téléviseur affiche la
puissance du signal TVN.
1 Utiliser les touches numériques pour saisir le
canal principal, 8 par exemple.
2 Appuyer sur –, puis sur le canal secondaire,
1 par exemple.
Réglage du volume
Pour régler le volume :
•
Appuyer sur VOL – or + pour diminuer ou
augmenter le volume.
•
Appuyer sur MUTE (Sourdine) pour
désactiver le son. Appuyer de nouveau sur
MUTE (Sourdine) pour réactiver le son.
Affichage de l'information d'état
Pour afficher l’information d’état :
•
Appuyer sur INFO. L’appareil affiche
l’information d’état, telle que le numéro de
canal ou la source du signal.
Ajout d’une étiquette à un canal
Sélection de la source d’entrée vidéo
Pour ajouter une étiquette à un canal :
1 Appuyer sur MENU.
Pour sélectionner la source d’entrée vidéo :
•
Appuyer plusieurs fois sur INPUT (Entrée)
pour sélectionner la source vidéo. Il est
possible de sélectionner :
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Setup (Configuration), puis sur
OK ou pour ouvrir le menu Setup
(Configuration).
•
•
TV – Signal TV
Composite1 – Prises AV INPUT 1
(ENTRÉE1 AV)
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Channel Labels (Étiquettes de
canaux), puis sur OK ou pour ouvrir le
menu Channel Labels (Étiquettes de
canaux).
•
•
Composite2 – Prises AV INPUT2
(ENTRÉE2 AV)
Component1 (Composante1) – Prises
COMPONENT INPUT1 (ENTRÉE1
COMPOSANTE1)
•
Component2 (Composante2) – Prises
COMPONENT INPUT2 (ENTRÉE2
COMPOSANTE2)
•
•
•
VGA – Prise D-SUB (ordinateur)
HDMI – Prise HDMI
S-Video – Prise S-Vidéo
Vérification de la puissance du signal TVN
Pour vérifier la puissance du signal TVN :
1 Appuyer sur MENU.
4 Appuyer sur ou pour déplacer le curseur.
Appuyer sur
ou
pour sélectionner un
numéro de canal ou un caractère.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Setup (Configuration), puis sur
OK ou pour ouvrir le menu Setup
(Configuration).
5 Appuyer sur OK pour retourner au menu
précédent ou sur EXIT (Quitter) pour fermer
le menu d’écran.
Arrêt sur image
Il est possible de faire un arrêt sur image (figer
l’image).
Attention
Pour éviter d’endommager l’appareil, ne pas faire
un arrêt sur image pendant une durée prolongée.
Pour faire un arrêt sur image ou réactiver
l'image :
•
Appuyer sur FREEZE (Arrêt sur image).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
4 Appuyer plusieurs fois sur
ou
pour
Réglage de l’horloge
sélectionner Time Set Mode (Mode de
réglage de l’horloge), puis sur OK ou pour
sélectionner Manual (Manuel).
L’horloge peut être réglée automatiquement à
partir d’un signal numérique de canal. L’appareil
recherche un canal numérique avec l’information
de l’heure encodée. Si l’heure affichée n’est pas
correcte, régler l’horloge manuellement.
Réglage automatique de l’horloge
Pour régler automatiquement l’horloge :
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Feature (Fonctions), puis sur
OK ou pour ouvrir le menu Feature
(Fonctions).
5 Appuyer sur
ou
pour sélectionner Year
(Année), Date ou Time (Heure), puis sur OK,
ou pour régler l’année, la date et l’heure.
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Time Set (Réglage de
6 Appuyer sur EXIT (Quitter) pour fermer le
l’horloge), puis sur OK ou pour ouvrir le
menu d’écran.
menu Time Set (Réglage de l’horloge).
Réglage de l’arrêt différé
L’arrêt différé permet de sélectionner la durée
avant que l’appareil se mette automatiquement
hors tension.
Pour régler l'arrêt différé :
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Feature (Fonctions), puis sur
OK ou pour ouvrir le menu Feature
(Fonctions).
4 Appuyer plusieurs fois sur
ou
pour
sélectionner Time Set Mode (Mode de
réglage de l’horloge), puis sur OK ou pour
sélectionner Auto.
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Sleep Timer (Arrêt différé), puis
sur OK ou pour sélectionner la durée
souhaitée. Pour désactiver l’arrêt différé,
sélectionner Off (Désactivé).
5 Appuyer plusieurs fois sur
ou
pour
sélectionner Time Zone (Fuseau horaire),
puis sur OK ou pour configurer le fuseau
horaire : Pacific (HNP), Alaska (Heure de
l’Alaska), Hawaii (Heure de Hawaï), Eastern
(HNE), Central (HNC) ou Mountain (HNR).
Remarque
Il est aussi possible d’utiliser la touche SLEEP
(Arrêt différé) de la télécommande pour configurer
l’arrêt différé.
6 Appuyer sur EXIT (Quitter) pour fermer le
menu d’écran.
Réglage manuel de l’horloge
Pour régler l’horloge manuellement :
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Feature (Fonctions), puis sur
OK ou pour ouvrir le menu Feature
(Fonctions).
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Time Set (Réglage de
l’horloge), puis sur OK ou pour ouvrir le
menu Time Set (Réglage de l’horloge).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
3 Appuyer plusieurs fois sur ou pour
Visualisation des sous-titres codés
sélectionner Parental Control (Contrôle
parental), puis sur OK ou pour ouvrir le
menu Parental Control (Contrôle parental).
Les sous-titres codés peuvent être visualisés
dans deux modes : LÉGENDE et TEXTE. Pour
chaque mode, quatre canaux sont disponibles.
Le mode LÉGENDE affiche le texte des
dialogues et des commentaires d’émissions de
télévision tout en permettant un affichage clair
des images. Le mode TEXTE affiche des
informations qui sont indépendantes des
programmes de télévision, telles que le
programme des émissions télévisées ou les
prévisions météorologiques). Dans le mode
TEXTE, des parties de l'image peuvent être
cachés par le texte.
Remarque
4 Appuyer plusieurs fois sur
ou
pour
Pour la diffusion numérique, il est possible
d’utiliser la touche CCD de la télécommande pour
sélectionner le mode des sous-titres codés.
sélectionner Password Change
(Modification du mot de passe), puis sur OK
ou pour accéder à l’option de modification
du mot de passe.
Pour personnaliser des sous-titres codés
numériques, utiliser le sous-menu Closed Caption
Options (Options des sous-titres codés) dans le
menu Feature (Fonctions).
Pour visualiser les sous-titres codés :
•
Appuyer plusieurs fois sur CCD pour
sélectionner le mode des sous-titres codés. Il
est possible de sélectionner :
5 Utiliser les touches numériques pour saisir
l’ancien mot de passe. Si un mot de passe
personnalisé n’a pas été saisi, entrer 0000.
•
•
•
•
•
•
•
•
•
CC1
CC2
CC3
CC4
TEXT1
TEXT2
TEXT3
TEXT4
Arrêt
6 Utiliser les touches numériques pour saisir
un nouveau mot de passe, puis le saisir une
deuxième fois pour confirmation.
Configuration du contrôle parental
L’appareil est doté d’une puce antiviolence qui
permet de contrôler l’accès à certaines
émissions par les enfants. Le contrôle parental
inclut deux classifications : MPAA (en fonction
de l’âge) et les directives parentales TV (en
fonction de l'âge et du contenu). Un programme
TV pouvant utiliser soit les niveaux MPAA ou les
directives parentales TV, les deux classifications
doivent être réglées pour un contrôle total.
Avant de sélectionner les classifications, il est
nécessaire de configurer le mot de passe du
contrôle parental.
Attention
Pour configurer un mot de passe :
Prendre note du mot de passe et en conserver
trace pour référence ultérieure.
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Feature (Fonctions), puis sur
OK ou pour ouvrir le menu Feature
(Fonctions).
Remarque
En cas d’oubli du mot de passe, entrer 1397
comme ancien mot de passe, puis saisir un
nouveau mot de passe. Ce mot de passe est
toujours valable pour la réinitialisation du mot de
passe.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Classification MPAA
5 Entrer le mot de passe.
Remarque
Classification Description
AUCUNE
G
Non classifié.
Tout public.
6 Appuyer sur
ou pour sélectionner
la classification, puis sur OK pour l'interdire
PG
Surveillance parentale suggérée.
Certains aspects peuvent ne pas
convenir à des enfants.
ou l'autoriser.
PG -13
R
Surveillance parentale fortement
suggérée. Certains aspects peuvent
être totalement inappropriés pour des
enfants de moins de 13 ans.
Réservé aux adultes. Interdit aux
mineurs de moins de 17 ans ou
accompagnement par un adulte requis.
NC-17
X
Déconseillé aux mineurs de moins de
17 ans.
Pour adultes uniquement.
Classification des directives parentales TV
Classification Description
L'interdiction d'une classification entraîne
l'interdiction de cette classification et de
toutes les classifications supérieures à
celle-ci.
AUCUNE
TV-Y
Non classifié.
Tous les enfants.
TV-Y7
TV-G
Interdit aux enfants de moins de 7 ans.
Tout public.
Utilisation du menu d’écran
L’appareil est doté d’un menu d’écran qui permet
de régler les paramètres du téléviseur, tels que
l’image vidéo et le son.
TV-PG
TV-14
TV-MA
Surveillance parentale suggérée.
Parents sérieusement mis en garde.
Adultes seulement.
Pour utiliser le menu d’écran :
1 Appuyer sur MENU.
Certaines des classifications des directives
parentales TV basées sur une tranche d’âge
spécifique ont aussi un classement en fonction
du contenu.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner un menu.
3 Appuyer sur
ou pour naviguer entre
les options ou pour régler une option.
Classification Description
FV
L
Violence fictive.
Grossièretés.
S
Situations à caractère sexuel.
Violence.
V
D
Dialogues à caractère sexuel.
Pour paramétrer la classification :
1 Appuyer sur MENU.
2 Appuyer plusieurs fois sur
ou
pour
sélectionner Feature (Fonctions), puis sur
OK ou pour ouvrir le menu Feature
(Fonctions).
3 Appuyer plusieurs fois sur
ou
pour
sélectionner Parental Control (Contrôle
parental), puis sur OK ou pour ouvrir le
menu Parental Control (Contrôle parental).
4 Appuyer plusieurs fois sur
ou
pour
sélectionner Parental Control Set
(Configuration du contrôle parental), puis sur
OK ou pour accéder aux paramètres de
classification.
4 Appuyer sur OK ou pour confirmer un
réglage, ouvrir un sous-menu ou défiler
parmi les paramètres.
5 Appuyer sur MENU pour retourner au menu
précédent ou sur EXIT (Quitter) pour fermer
le menu d’écran.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Menus d’écrans
Menu d’écran
Options
Audio
Sound Mode (Mode sonore) – Sélectionne le
mode sonore : User (Utilisateur), News
(Nouvelles), Music (Musique) ou Movie (Film).
Il est aussi possible d’appuyer sur AUDIO pour
sélectionner le mode sonore.
Bass (Graves) – Règle les graves (notes
basses).
Treble (Aigus) – Règle les aigus (notes
puissantes).
Balance – Règle la balance des volumes entre
les haut-parleurs droit et gauche.
Menu d’écran
Vidéo
Options
( Les options
varient en fonction
des différents
modes
Picture Mode (Mode de l’image) – Sélectionne
le mode de l’image : User (Utilisateur), Nature,
Soft (Doux) ou Bright (Vif). Il est aussi possible
d’appuyer sur PICTURE (Image) pour
( Les options
varient en fonction
des différents
modes
disponibles).
sélectionner le mode de l’image.
disponibles).
Contrast (Contraste) – Augmente la définition
de l’image pour régler les zones blanches de
l’image. Diminue la définition de l’image pour
en régler les zones noires.
Brightness (Luminosité) – Augmente la
luminosité pour ajouter plus de lumière aux
zones sombres de l’image. Diminue la
luminosité pour nuancer les zones claires de
l’image.
Color (Couleur) – Permet de régler la richesse
de la couleur de l'image.
Earphone Vol (Volume de l’écouteur) – Règle
le volume de l’écouteur.
Digital Audio Output (Sortie numérique audio)
– Permet de sélectionner le mode audio pour la
prise S/PDIF.
• RAW (Brut) : Entrée AC-3 et sortie
AC-3/Entrée PCM et sortie PCM.
Sharpness (Netteté) – Augmente la définition
pour afficher une image plus nette et plus
claire. Diminue la définition pour afficher une
image plus fluide.
Aspect Ratio (Format d'image) – Permet de
modifier le format d’image : Wide
(Panoramique), Cinema (Cinéma), Normal ou
Zoom. Il est aussi possible d’appuyer sur
ZOOM pour sélectionner le format d’image.
• PCM (Pulse Code Modulation)
[Modulation par codage d'impulsions] :
Entrée AC-3 et sortie PCM/Entrée PCM
et sortie PCM.
MTS – Permet de sélectionner la transmission
multivoie de signaux sonores en télévision
(MTS) : Mono, Stereo (Stéréo) ou SAP
(deuxième trame sonore). Il est aussi possible
d’appuyer sur MTS/SAP pour sélectionner le
mode MTS.
Audio Language (Langue audio) – Permet de
sélectionner une autre langue si le programme
est doté de plus d’une langue.
Advanced Video Menu (Menu vidéo avancé) –
Pour accéder aux fonctions avancées :
• Noise Reduction (Réduction du bruit) –
Diminue les parasites (neige) de
l’image.
• Tint (Teinte) – Augmente le niveau de la
couleur pour ajouter plus de vert aux
tons chair. Diminue le niveau de la
couleur pour ajouter plus de violet aux
tons chair.
Configuration
Tuning Band (Bande de syntonisation) –
Permet de sélectionner la source du signal TV.
Pour toute information complémentaire, voir «
DTV Signal (Signal TVN) – Affiche la puissance
du signal TV numérique. Pour toute
• Color Temperature (Température de
couleur) – Pour sélectionner un des
trois réglages de couleur : Cool (Froide)
pour plus de bleu, Warm (chaude) pour
plus de rouge et Normal (Normale).
• 3D Y/C (Y/C 3D) – Pour activer ou
désactiver le filtre en peigne 3D.
VGA Set/Component Set (Réglage
VGA/Réglage des composantes) – Si l’appareil
est connecté à un ordinateur ou vidéo à
composantes, permet la configuration des
options suivantes :
Auto Ch Search (Recherche automatique des
canaux) – Configure automatiquement une liste
des canaux disponibles localement. Pour toute
information complémentaire, voir «
Manual Ch Set (Réglage manuel des canaux) –
Permet d’ajouter ou de supprimer des canaux
de la liste des canaux. Pour toute information
complémentaire, voir « Manually adding or
Channel Labels (Étiquettes de canaux) –
Permet d’ajouter une étiquette à un canal. Pour
toute information complémentaire, voir «
• H-Pos (Position H) – Permet de régler
les paramètres de la position
horizontale de l’image.
• V-Pos (Position V) – Permet de régler
les paramètres de la position verticale
de l’image.
• Clock (Horloge) – Définit la fréquence
d'échantillonnage.
• Phase – Améliore la netteté d’une image
fixe.
• Setting (Réglage) – Réinitialise le mode
VGA au défaut usine.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
5 Saisir le code à cinq chiffres du périphérique.
Le témoin à DEL clignote chaque fois qu’un
chiffre est saisi. Si le code est correct, le
témoin à DEL clignote deux fois.
Menu d’écran
Caractéristique
Options
Source – Sélection de la source vidéo. Il est
possible de sélectionner :
• TV
• Composite1
• Composite2
Remarque
Si le témoin à DEL ne clignote pas deux fois,
répéter les étapes 3 à 5 en essayant un code
différent.
• Component1 (Composante1)
• Component2 (Composante2)
• VGA
6 Pointer la télécommande vers le
périphérique, puis appuyer sur . Le
périphérique se met hors tension.
• HDMI
• S-Vidéo
Il est aussi possible d’appuyer sur INPUT
(Entrée) pour sélectionner la source vidéo.
Time Set (Réglage de l’horloge) – Pour régler
l’horloge. Pour toute information
Sleep Timer (Arrêt différé) – Pour configurer
l’arrêt différé. Pour toute information
Remarque
Si le périphérique ne s’éteint pas, répéter les
étapes 4 à 6 en essayant un code différent. Si
aucun des codes dans la liste ne fonctionne, voir «
7 Répéter les étapes 1 à 6 pour programmer
d’autres périphériques.
Parental Control (Contrôle parental) – Permet
d’accéder aux paramètres de la puce
antiviolence. Pour toute information
Closed Caption Options (Options des
sous-titres codés) – Permet de personnaliser
les sous-titres codés pour la diffusion
numérique. Il est possible de régler la taille, la
police de caractères, la couleur du texte, la
transparence du texte, la couleur de fond, la
transparence de fond, l’effet de la bordure et la
couleur de la bordure.
CC when Mute (Sous-titres codés pendant la
mise en sourdine) – Affiche automatiquement
les sous-titres codés pendant la mise en
sourdine.
Menu Language (Langue du menu) – Permet
de sélectionner la langue de l’affichage du
menu d’écran. Il est possible de sélectionner
l’anglais, le français ou l’espagnol.
8 Appuyer sur SET (Réglage) pour enregistrer
le code et quitter le menu.
Remarque
Noter tous les codes qui fonctionnent pour
référence ultérieure.
Recherche d’un code
Pour rechercher un code :
1 Appuyer sur la touche du périphérique.
2 Appuyer sans relâcher sur SET (Réglage)
jusqu’à ce que le témoin à DEL clignote deux
fois, puis relâcher.
3 Saisir 991, puis le chiffre du groupe de
périphérique (0 = câble, 1 = téléviseur, 2 =
magnétoscope, 3 = audio). Le témoin à DEL
clignote deux fois.
4 Pointer la télécommande vers le
périphérique, puis appuyer sur . Si le
périphérique répond, aller à l'étape 7.
Programmation de la télécommande
Pour programmer un périphérique connecté
à l’appareil
La télécommande peut contrôler quatre
périphériques, tels qu’un magnétoscope, un
lecteur de DVD, un récepteur câble ou satellite,
un amplificateur ou syntoniseur, ainsi que
d’autres périphériques similaires.
5 Si le périphérique ne répond pas, appuyer
sur CH+. La télécommande essayera le
prochain code. Maintenir CH+ appuyé
jusqu’à ce que le périphérique réponde. Il est
possible d’appuyer sur CH– pour essayer un
code précédent.
6 Pour chercher le code d’un autre
périphérique, répéter les étapes 1 à 5.
Pour programmer la télécommande :
1 Trouver le code pour le périphérique à
la liste des codes. S’il existe plus d’un code
pour un périphérique, noter tous les codes.
7 Appuyer sur SET (Réglage) pour enregistrer
le code et quitter le menu.
Vérification du code
Si lors de la recherche d’un code, un
périphérique a été programmé, il est
recommandé de vérifier quel code à quatre
chiffres est utilisé par la télécommande.
2 Mettre le périphérique à programmer sous
tension et charger le support si nécessaire,
un disque DVD par exemple.
3 Appuyer sur la touche du périphérique
concerné de la télécommande, par exemple,
DVD, CBL ou AUX.
Pour vérifier le code :
1 Appuyer sur la touche du périphérique de la
télécommande.
4 Appuyer sans relâcher sur SET (Réglage) de
la télécommande jusqu’à ce que le témoin à
DEL clignote deux fois, puis relâcher.
2 Appuyer sans relâcher sur SET (Réglage)
jusqu’à ce que le témoin à DEL clignote deux
fois, puis relâcher.
3 Saisir 990. Le témoin à DEL clignote deux
fois.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
4 Appuyer sur 1 et compter les clignotements
du témoin à DEL. Ceci est le premier chiffre
du code (par exemple, si le témoin à DEL
clignote deux fois, le premier chiffre est 2. Si
le témoin à DEL ne clignote pas, le premier
chiffre est 0).
•
Ne pas placer l’appareil sous la lumière
solaire directe ou à proximité d’une source de
chaleur.
Nettoyage de l’appareil
Nettoyer l’écran et le boîtier avec un chiffon doux
et non pelucheux. Si l’écran ou le boîtier est
extrêmement sale, humidifier un chiffon doux et
non-pelucheux avec un détergent doux dilué, le
presser pour extraire autant d’humidité, puis
essuyer l’écran ou le boîtier. Sécher l’écran ou le
boîtier avec un chiffon propre.
5 Répéter l’étape 4 en utilisant 2 pour le
second chiffre, 3 pour le troisième chiffre, 4
pour le quatrième chiffre et 5 pour le
cinquième chiffre.
6 Appuyer sur SET (Réglage) pour quitter.
Programmation du verrouillage de volume
Attention
La télécommande est préréglée pour permettre
de contrôler le volume de chaque périphérique
connecté. Il est possible de changer le
verrouillage de volume afin que le volume d’un
périphérique contrôle le volume dans tous les
modes.
Éviter ce qui suit car cela pourrait endommager
l’appareil :
•
Le nettoyage de l’appareil avec toutes
substances volatiles, telles que les
insecticides, les solvants et les diluants.
Le contact avec des articles en caoutchouc ou
en PVC pour une durée prolongée.
Les gouttes d’eau dans le boîtier
•
•
Après avoir verrouillé le contrôle de volume, il
est possible de déverrouiller le contrôle du
volume d’un périphérique spécifique afin de
contrôler le volume de ce dernier
Problèmes et solutions
indépendamment.
Avertissement
Pour verrouiller la commande du volume
d’un périphérique :
1 Appuyer sans relâcher sur SET (Réglage)
jusqu’à ce que le témoin à DEL clignote deux
fois, puis relâcher.
L’utilisateur ne doit pas essayer de réparer cet
appareil lui-même. Toutes les réparations doivent
être effectuées par du personnel qualifié.
Anomalie
Solution possible
2 Saisir 993, puis appuyer sur la touche du
périphérique dont le contrôle de volume est
nécessaire. Le témoin à DEL clignote deux
fois. Quand les touches VOL+, VOL– ou
MUTE (Sourdine) de la télécommande sont
appuyées, le périphérique sélectionné
contrôle le volume quel que soit le
Pas d’alimentation.
• Vérifier que le cordon
d’alimentation est connecté à
l’appareil et à une prise secteur.
• Débrancher le cordon
d’alimentation, attendre 60
secondes, puis le rebrancher et
mettre l’appareil en marche.
périphérique qui est utilisé.
Absence d’image.
• Vérifier que les câbles vidéo
sont correctement connectés à
l’arrière de l’appareil.
• Régler le contraste et la
luminosité.
• Vérifier que le mode vidéo
correct est sélectionné.
• Vérifier que le signal d’entrée
est compatible.
Pour déverrouiller la commande du volume :
1 Appuyer sans relâcher sur SET (Réglage)
jusqu’à ce que le témoin à DEL clignote deux
fois, puis relâcher.
2 Saisir 993, puis appuyer sur VOL+. Le
témoin à DEL clignote quatre fois. Le
contrôle du volume est déverrouillé.
Bonne image mais pas
de son
• Augmenter le volume.
• Vérifier que le son n’est pas mis
en sourdine.
• Vérifier que le mode audio
correct est sélectionné.
Pour déverrouiller le contrôle du volume d’un
seul périphérique :
1 Appuyer sur la touche du périphérique.
Bonne qualité du son,
mais les couleurs sont
médiocres
• Régler le contraste, la couleur
et la luminosité.
2 Appuyer sans relâcher sur SET (Réglage)
jusqu’à ce que le témoin à DEL clignote deux
fois, puis relâcher.
Image de mauvaise
qualité
• Vérifier que la luminosité de la
pièce n’est pas trop forte. La
lumière reflétée par l’écran peut
rendre l’image difficile à voir.
• Si une caméra S-VHS ou un
caméscope est connecté alors
qu’un autre périphérique
3 Saisir 993, puis appuyer sur VOL+. Le
témoin à DEL clignote quatre fois. La
commande du volume pour le périphérique
sélectionné est déverrouillée.
Entretien
branché est sous tension,
l’image peut être médiocre.
Éteindre un ou plusieurs
•
Ne pas utiliser cet appareil dans des endroits
trop chaud ou trop froid, cela pourrait
déformer le boîtier ou entraîner un
fonctionnement défectueux.
périphériques.
Ligne pointillée
horizontale
• Le téléviseur est éventuellement
trop proche d’un appareil
électrique tel qu’un
•
Température de stockage : 32 à 122 °F (0
à 50 °C).
sèche-cheveux ou une lumière
au néon. Éteindre l’appareil ou
déplacer le téléviseur.
•
Température en fonctionnement : 41 à
104 °F (5 à 40 °C).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Anomalie
Solution possible
Spécifications
La télécommande ne
marche pas
• Appuyer sur la touche TV.
• Remplacer les piles. Veiller à ce
que les pôles + et – des piles
coïncident avec les indications
+ et – figurant à l'intérieur du
compartiment.
• Nettoyer le capteur de
télécommande situé sur la
partie avant du téléviseur.
• Une lumière forte ou
fluorescente peut interférer
avec le signal de la
•
La conception et les spécifications sont
sujettes à modifications sans avis préalable.
•
Le poids et les dimensions indiqués sont
approximatifs.
Alimentation
100 à 240 V CA, 50/60 Hz
200 W
Consommation
électrique
Écran
37 pouces
Canaux
accessibles
VHF : 2 à 13
télécommande. Éteindre la
lumière ou déplacer le
téléviseur.
UHF : 14 à 69
TV câblée : 1 à 125
CADTV : 1 à 135
TVN : 2 à 69
Image neigeuse et
bruitée
• Vérifier que les câbles
audio-vidéo (A/V) sont
fermement connectés.
Poids
70,4 lb (31,93 kg)
L’image VGA est instable
ou non synchronisée
• Vérifier que le mode VGA de
l’ordinateur est correct.
Dimensions
L ×H×P
37,2 × 28,9 × 12,2 pouces
(944,9 ×734,1 ×309,9 mm)
Pas de sortie sonore sur
l’un des haut-parleurs
• Régler la balance dans le menu
Température :
Stockage – 32 à 122°F (0 à 50°C).
Sound (Son).
En fonctionnement – 41 à 104°F (5 à
40°C).
Les touches de
commande ne
fonctionnent pas
• Débrancher le cordon
d’alimentation, attendre
quelque secondes puis
rebrancher le cordon et
rallumer le téléviseur.
Standard TV
Accessoires
NTSC-M, ATSC
Guide de l’utilisateur
Télécommande
Piles (2 AA)
Image rémanente
• Ne pas afficher une image fixe
telle qu’un logo, un jeu ou une
image d’ordinateur pendant une
période prolongée. Ceci peut
provoquer l’incrustation d’une
image rémanente sur l’écran.
Ces dommages ne sont pas
couverts par la garantie.
Le téléviseur émet des
craquements
• Les craquements se produisent
quand le châssis du téléviseur
se dilate ou se contracte sous
l’effet de variations de
températures. Ceci est normal.
Télécommande
Le témoin à DEL ne
clignote pas quand une
touche est appuyée
Remplacer les piles.
Le témoin à DEL clignote S’assurer d’être à moins de 15 pi (4,6
quand une touche est
appuyée mais le
mètres) du périphérique et de pointer
la télécommande vers le capteur de
périphérique ne répond télécommande du périphérique.
pas
Le témoin à DEL reste
allumé
Une touche a été incorrectement
appuyée. Recommencer de nouveau la
procédure.
La télécommande ne
contrôle pas un
Vérifier que le périphérique est doté
d'un capteur de télécommande, puis
essayer un autre code.
périphérique ou ne
commande que
certaines fonctionnalités
de celui-ci
Pas de volume sur le
périphérique
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
RadioShack
31263
Annexe
RCA
31023, 31609, 31254, 30531, 31074
Codes de l’amplificateur audio
Sharper Image
Silsonic
Sony
31263
30176
Bose
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
31258, 31759
30670
GE
Soundesign
Stereophonics
Sunfire
JVC
31023
Marantz
Nakamichi
NEC
31313
Teac
31074, 31267
31308, 31518, 30039
31189
Technics
Thorens
Victor
Optimus
Realistic
Sansui
Shure
30074
Wards
30014
Yamaha
30176, 31276, 31176
Sony
Soundesign
Victor
Codes du décodeur câble
Wards
Yamaha
ABC
00003, 00008, 00014
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Daeryung
Digi
00899
00014
Codes de l’amplificateur/syntoniseur
audio
00899
00883
00883
ADC
30531
00883
Aiwa
31405, 31243, 30121
01877, 00877, 00477, 00008
Anam
31609, 31074
00637
Audiotronic
Bose
31189
Director
Dumont
Gehua
00476
31229
00637
Capetronic
Carver
30531
00476
31189
General
00476, 00810, 00276, 00003, 00014
Coby
31263
Instrument
Denon
31360, 31142, 30904
GoldStar
Hamlin
Hitachi
Jerrold
00144
Fonmix
Glory Horse
Harman/Kardon
Hitachi
Inkel
31360
00009, 00273
00014
31263
30110
00476, 00810, 00276, 00003, 00012,
00014
31273
30027
KNC
00008
Integra
JBL
30135
LG
00144
30110
Memorex
Motorola
MultiVision
Pace
00000
JVC
30074, 31263
31313, 31570, 30027
31428
00476, 00810, 00276, 01254, 01376
Kenwood
KLH
00012
01877, 00237
00000, 00008, 00107
00637
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
Panasonic
Panther
Paragon
Philips
00000
Onkyo
30842, 30135
31023, 30670, 30531, 31074
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
00317, 01305
01877, 00877, 00144, 00533
00000
Optimus
Panasonic
Philips
Pioneer
Proscan
Qisheng
Quasar
Pioneer
Pulsar
Quasar
RadioShack
Regal
00000
00883
00279, 00273
00000
31609
Runco
30039
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Samsung
00000, 00144
Pioneer
Polk Audio
Proton
QED
31063, 31062, 30032
Scientific Atlanta 01877, 00877, 00477, 00008
30157
Sony
01006
30157
Starcom
Supercable
Supermax
Tocom
Torx
00003, 00014
00276
30157
Quad
30157
00883
Quasar
RadioShack
RCA
30029
00012
31075
00003
31062, 30032, 30420, 30179, 30053
Toshiba
Trans PX
Tristar
00000
Realistic
Rotel
30420, 30179
30157, 30420
30157
00276
00883
SAE
TS
00003
Sansui
30157
V2
00883
Sanyo
30179
Viewmaster
Vision
00883
SAST
30157
00883
Sharp
30861, 30037
30888, 30036
30157
Vortex View
Zenith
00883
Silsonic
Sonic Frontiers
Sony
00000, 00525, 00899
30490, 30000, 30100
30145
Soundesign
TAG McLaren
Tascam
Teac
Codes du lecteur de CD
30157
Aiwa
30157
30420
30029
30420
Burmester
30420
California Audio
Labs
Technics
Victor
30029
30072
Carver
Denon
DKK
30157, 30179
30873
Wards
30157, 30053
30888, 30036
30157
Yamaha
Zonda
30000
DMX Electronics 30157
Dynamic Bass
Fisher
30179
Codes du lecteur de DVD
30179
Garrard
30420
Aiwa
20641, 21912
20770
Genexxa
Harman/Kardon
Hitachi
30032
Akai
30157, 30173
30032
Allegro
Apex Digital
20869
20672, 20717, 20797, 21061, 20796,
21056, 21937, 20794, 21020, 21915
Integra
30101
JVC
30072
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
20717
Kenwood
30826, 30626, 30028, 30037, 30036,
30190
20571
20695
Krell
30157
20627, 21061
Linn
30157
20869
Magnavox
Marantz
MCS
30157
21086
30626, 30029, 30157
30029
Curtis Mathes
CyberHome
Daewoo
21087
21024, 21023, 21129, 20816, 21117
Miro
30000
20833, 21172, 20869
20490
Mission
MTC
30157
Denon
30420
DVD2000
Emerson
Entreprise
Fisher
20521
NSM
30157
20591, 20675
20591
Onkyo
Optimus
30868, 30101
31063, 30000, 30032, 30037, 30420,
30179, 31075, 30145
21919
Funai
20675
Panasonic
Parasound
Philips
30029
Gateway
GE
21158, 21073
20522, 20717
30420
30626, 30157
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Go Video
20744, 20833, 21099, 20783, 21075,
20869, 21730
Symphonic
20675
Teac
20717, 21984, 20809
20490
Greenhill
Harman/Kardon
Hitachi
20717
Technics
Theta Digital
Toshiba
Urban Concepts
Xbox
20582, 20702
20571
20573, 20664, 21919
20503, 20695
20503
Hiteker
20672
Initial
20717
20522
Integra
JBL
20627, 21924
Yamaha
Zenith
20490, 20539, 20545
20503, 20591, 20869
20702
JVC
20558, 20623, 20867
Kenwood
KLH
20490, 20534
Codes du récepteur satellite
20717, 21020, 21149
Koss
20651, 21980
AlphaStar
Chaparral
Crossdigital
DirecTV
00772
00216
01109
Lasonic
LG
20798
20591, 20869, 20801
Liquid Video
Lite-On
Loewe
21980
00392, 00566, 00639, 01142, 00247,
00749, 01749, 00724, 00819, 01856,
01076, 01109, 00099, 01392, 01640,
01442, 01414, 01108
21158, 21058
20511
Magnavox
Marantz
Memorex
Microsoft
Mintek
20503, 20539, 21976, 21914, 20675
Dish Network
System
01005, 00775, 01505
20539
Dishpro
Echostar
Expressvu
GE
01005, 00775, 01505
01005, 00775, 01505
00775
20695
20522
20717
00566
Mitsubishi
Nesa
21521, 20521
General
Instrument
00869
20717
Norcent
Onkyo
21003
GOI
00775
20503, 20627, 21924, 20792
Goodmans
Hisense
Hitachi
HTS
01246
Oritron
Panasonic
Philips
20651, 21980
01535
20490, 21762, 21990
00819, 00222, 01250
00775
20503, 20539, 20646, 21914
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
20525, 20571
Hughes Network 01142, 00749, 01749, 01442
Systems
21086, 21061
20539
I-Lo
01535
20770
JVC
00775
20522
LG
01414, 01226
00724, 00722
00724
20651
Magnavox
Memorex
Mitsubishi
Motorola
NEC
20522, 20571, 20717, 20822
Rio
20869
00749
Rotel
20623
00869
Sampo
Samsung
Sansui
20752, 20698
01270
20490, 20573, 21932, 21075, 20820
Next Level
Panasonic
Paysat
00869
20695
00247, 00701
00724
Sanyo
20695
Sharp
20630, 20752
Philips
01142, 00749, 01749, 00724, 01076,
00722, 00099, 01442
Sharper Image
Sherwood
Shinco
21117
Proscan
Proton
RadioShack
RCA
00392, 00566
20770
01535
20717
00869
Shinsonic
Sonic Blue
Sony
20533
00392, 00566, 00855, 00143, 01392
20869, 21099
Samsung
Sanyo
01276, 01109, 01108
01219
20533, 20864, 21033, 21904, 21903
SVA
20717
20675
SKY
00856
Sylvania
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Sony
00639, 01640
00869
Fujitsu
20045
Star Choice
Tivo
Gateway
GE
21972
01142, 01442
00749, 01749, 00790, 01285
01640, 01392
00724, 00722
01535
20060, 20035, 20240
Toshiba
Ultimate TV
Uniden
US Digital
USDTV
Voom
General
20045
Go Video
GoldStar
Haojie
20432
20037, 20209, 20038, 20225
20240
01535
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
20081, 20038
20072
00869
Zenith
00856, 01856
21972
20047
Hitachi
20037, 20042, 20055
21972
Codes du magnétoscope
Howard
Computers
ABS
21972
HP
21972
Admiral
20048, 20209
Hughes Network 20042, 20739
Systems
Aiko
20278
Aiwa
20037, 20479
iBUYPOWER
JVC
21972
Alienware
America Action
American High
Amoisonic
Anam
21972
20045, 20067
20037, 20278
20067, 20038
20072
20278
KEC
20035
Kenwood
KLH
20479
20162, 20037, 20240, 20278
Kodak
Kolin
20035, 20037
Anam National
Asha
20162
20043, 20037, 20045, 20042, 20209,
20038
20240
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
20037, 20278
Logik
20072
20240
LXI
20037
20104
Magnavox
Magnin
Marantz
Marta
20035, 20039, 20081
20240
20184, 20121, 20209, 20002, 20479
20037
20035, 20081
20037
Canon
20035
Carver
20081
Matsushita
20035, 20162
CCE
20072, 20278
20048, 20081
20037, 20278
20072
Media Center PC 21972
Changhong
Citizen
MEI
20035
Memorex
20035, 20162, 20037, 20048, 20039,
20047, 20240, 20104, 20209, 20479
Colt
MGA
20240, 20043
Craig
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
MGN Technology 20240
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
Microsoft
Mind
21972
21972
21972
Minolta
Mitsubishi
Motorola
MTC
20042
20045, 20104, 20278
21972
20067, 20043
20035, 20048
20240
Denon
20042
DirecTV
Durabrand
Electrohome
Electrophonic
Emerex
20739
Multitech
NEC
20072
20039, 20038
20037
20035, 20037, 20048, 20104, 20067,
20038
20037
Newave
Nikko
20037
20037
20240
21972
20035
20032
Emerson
20035, 20037, 20184, 20240, 20045,
20121, 20043, 20209, 20002, 20278,
20479
Noblex
Northgate
Olympus
Optimus
Fisher
Fuji
20047, 20104
20035, 20033
21062, 20162, 20037, 20048, 20104,
20432
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
Orion
20184, 20209, 20002, 20479
Victor
20067
Panasonic
Penney
Pentax
Philco
21062, 20035, 20162, 20616, 20225
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
20045
20037
20240
21972
20035, 20037, 20240, 20042, 20038
20042
20035, 20479
Philips
Pilote
20035, 20081, 20739, 20618
20060, 20035, 20048, 20047, 20081,
20240, 20042, 20072
20037
White
Westinghouse
20209, 20072
Pioneer
Polk Audio
Profitronic
Proscan
Protec
20042, 20067
20081
XR-1000
Yamaha
Zenith
20035, 20072
20240
20038
20060
20039, 20033, 20209, 20479
21972
20072
ZT Group
Pulsar
20039
Qisheng
Quasar
Radix
20060
Avis juridiques
20035, 20162
Droits d'auteurs
20037
© 2006 Insignia. Insignia et le logo Insignia sont des
marques de commerce de Best Buy Enterprise
Services, Inc. Les autres noms de marques et de
produits mentionnés sont des marques de commerce
ou des marques déposées de leurs propriétaires
respectifs. Les spécifications et caractéristiques sont
susceptibles d’être modifiées sans préavis.
Randex
RCA
20037
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
Realistic
ReplayTV
Runco
20039
Sampo
Samsung
Sanky
20037, 20048
20240, 20045, 20432
20048, 20039
Sansui
Sanyo
20067, 20209, 20479
20047, 20240, 20104
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
Scott
Sears
Sharp
Shintom
Shogun
Singer
20072
20240
20072
Sonic Blue
Sony
20616
20035, 20032, 20033, 20636, 21972
20042
STS
Sylvania
Systemax
Tagar Systems
Tashiko
Tatung
Technics
Teco
20035, 20081, 20043
21972
21972
20037
20045, 20067
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
Teknika
Tivo
20636, 20618, 21503, 20739
20240
TMK
Toshiba
20045, 20042, 20067, 20043, 21503,
21008, 21972
Totevision
Touch
20037, 20240
21972
Unitech
20240
Vector
20045
Vector Research
20038
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
LA RÉPARATION OU LE REMPLACEMENT, TELS
QU’OFFERTS PAR LA PRÉSENTE GARANTIE,
Garantie
Garantie limitée d’un an
CONSTITUENT LE SEUL RECOURS DE L’ACHETEUR.
INSIGNIA NE SAURAIT ÊTRE TENU POUR
RESPONSABLE DE DOMMAGES ACCESSOIRES OU
CONSÉCUTIFS, RÉSULTANT DE L’INEXÉCUTION D'UNE
GARANTIE EXPRESSE OU IMPLICITE SUR CE PRODUIT,
Y COMPRIS, SANS S’Y LIMITER, LA PERTE DE
DONNÉES, L’IMPOSSIBILITÉ D’UTILISER LE PRODUIT,
L’INTERRUPTION D’ACTIVITÉ OU LA PERTE DE
PROFITS. INSIGNIA PRODUCTS N’OCTROIE AUCUNE
AUTRE GARANTIE EXPRESSE RELATIVE À CE PRODUIT
; TOUTES LES GARANTIES EXPRESSES OU IMPLICITES
POUR CE PRODUIT, Y COMPRIS MAIS SANS
Insignia Products (“Insignia”) garantit au premier acheteur de
ce Téléviseur ACL de 37 po neuf (“Produit”), qu’il est exempt
de vices de fabrication et de main-d’œuvre à l’origine, pour
une période d’un (1) an à partir de la date d’achat du Produit
(“Période de garantie”). Ce produit doit avoir été acheté chez
un revendeur agréé des produits de la marque Insignia et
emballé avec cette déclaration de garantie. Cette garantie ne
couvre pas les Produits remis à neuf. Les conditions de la
présente garantie s’appliquent à tout Produit pour lequel
Insignia est notifié, pendant la Période de garantie, d’un vice
couvert par cette garantie qui nécessite une réparation.
LIMITATION, TOUTE GARANTIE DE QUALITÉ
MARCHANDE, D'ADÉQUATION À UN BUT PARTICULIER,
SONT LIMITÉES À LA PÉRIODE DE GARANTIE
APPLICABLE TELLE QUE DÉCRITE CI-DESSUS ET
AUCUNE GARANTIE EXPRESSE OU IMPLICITE, NE
S’APPLIQUERONT APRÈS LA PÉRIODE DE GARANTIE.
CERTAINS ÉTATS ET PROVINCES NE RECONNAISSENT
PAS LES LIMITATIONS DE LA DURÉE DE VALIDITÉ DES
GARANTIES IMPLICITES. PAR CONSÉQUENT, LES
LIMITATIONS SUSMENTIONNÉES PEUVENT NE PAS
S'APPLIQUER À L’ACHETEUR ORIGINAL. LA PRÉSENTE
GARANTIE DONNE À L'ACHETEUR DES GARANTIES
JURIDIQUES SPÉCIFIQUES ; IL PEUT AUSSI
Quelle est la durée de la couverture ?
La Période de garantie dure 1 an (365 jours) à compter de la
date d’achat de ce Produit. La date d’achat est imprimée sur
le reçu fourni avec le Produit.
Que couvre cette garantie ?
Pendant la Période de garantie, si un vice de matériau ou de
main-d’œuvre d'origine est détecté sur le Produit par un
service de réparation agréé par Insignia ou le personnel du
magasin, Insignia (à sa seule discrétion) : (1) réparera le
Produit en utilisant des pièces détachées neuves ou remises
à neuf ; ou (2) remplacera le Produit par un produit ou des
pièces neuves ou remises à neuf de qualité comparable. Les
produits et pièces remplacés au titre de cette garantie
deviennent la propriété d’Insignia et ne sont pas retournés à
l’acheteur. Si les Produits ou pièces nécessitent une
réparation après l’expiration de la Période de garantie,
l’acheteur devra payer tous les frais de main d’œuvre et les
pièces. Cette garantie reste en vigueur tant que l’acheteur
reste propriétaire du Produit Insignia pendant la Période de
garantie. La garantie prend fin si le Produit est revendu ou
transféré d’une quelconque façon que ce soit à tout autre
propriétaire.
BÉNÉFICIER D'AUTRES GARANTIES QUI VARIENT D'UN
ÉTAT OU D'UNE PROVINCE À L'AUTRE.
Comment obtenir une réparation sous garantie ?
Si le Produit a été acheté chez un détaillant, le rapporter
accompagné du reçu original chez ce détaillant. S’assurer
de remettre le Produit dans son emballage d’origine ou dans
un emballage qui procure la même qualité de protection que
celui d’origine. Si le Produit a été acheté en ligne, l’expédier
accompagné du reçu original à l’adresse indiquée sur le site
Web. S’assurer de remettre le Produit dans son emballage
d’origine ou dans un emballage qui procure la même qualité
de protection que celui d’origine.
Où cette garantie s’applique-t-elle ?
Cette garantie ne s’applique qu’à l’acheteur original du
Produit aux États-Unis et au Canada.
Ce qui n’est pas couvert par cette garantie limitée
La présente garantie ne couvre pas :
•
•
•
•
•
la formation du client ;
l'installation ;
les réglages de configuration ;
les dommages esthétiques ;
les dommages résultants de catastrophes naturelles
telles que la foudre ;
•
•
•
•
•
•
les accidents ;
une utilisation inadaptée ;
une manipulation abusive ;
la négligence ;
une utilisation commerciale ;
la modification de tout ou partie du Produit, y compris
l’antenne.
La présente garantie ne couvre pas non plus :
•
•
•
les dommages ayant pour origine une utilisation ou une
maintenance défectueuse ;
la connexion à une source électrique dont la tension est
inadéquate ;
Toute réparation effectuée par quiconque autre qu’un
service de réparation agréé par Insignia pour la
réparation du Produit
•
•
•
les Produits vendus en l’état ou hors service ;
les consommables tels que les fusibles ou les piles ;
les produits dont le numéro de série usine a été altéré
ou enlevé du Produit.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Téléviseur ACL de 37 po Insignia NS-37LCD
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Siga las advertencias y las instrucciones
Televisor Insignia
NS-37LCD con
Pantalla LCD de 37"
Preste atención a todas las advertencias sobre
su televisor y las instrucciones de operación.
Siga todas las instrucciones de operación y uso.
Agua y humedad
No use su televisor cerca del agua. Por ejemplo,
no lo use cerca de una bañera, lavabo,
fregadero de cocina o lavadero, en un sótano
mojado o cerca de una piscina.
Limpieza
Contenido
Desconecte su televisor antes de limpiarlo. No
use productos de limpieza líquidos o en aerosol.
Use solamente un paño húmedo para limpiar el
exterior de su televisor.
Ventilación
Las ranuras y aberturas en el gabinete y en la
parte posterior o en la base se proporcionan con
fines de ventilación, operación confiable y
protección contra sobrecalentamiento. Estas
aberturas no se deben bloquear ni cubrir. No
cubra las aberturas al colocar su televisor sobre
una cama, sofá, alfombra, o cualquier otra
superficie parecida. No coloque su televisor
cerca o sobre un radiador o calefactor. No
coloque su televisor en una instalación
Información de seguridad
Advertencia
integrada, tal cómo un librero o estante, a
menos que se provea una ventilación adecuada
o siga las instrucciones del fabricante.
Para reducir el riesgo de choque eléctrico, no retire la cubierta
o la parte posterior. No existen partes reparables por el
usuario en el interior. Para realizar reparaciones, acuda al
personal de servicio calificado.
Calor
Para reducir el riesgo de incendio o choque eléctrico, no
exponga su televisor a la lluvia o la humedad.
Asegúrese de que su televisor se encuentre
alejado de fuentes de calor tal cómo radiadores,
calefactores, estufas u otros productos
(incluyendo amplificadores) que produzcan
calor.
Cuidado
Para evitar un choque eléctrico, introduzca la clavija ancha del
enchufe del cable de alimentación en la ranura ancha de un
tomacorriente. Si el enchufe no entra, solicite a un electricista
calificado con licencia que cambie el tomacorriente obsoleto.
No modifique el enchufe del cable de alimentación ya que se
anulará esta característica de seguridad.
Conexión a tierra o polarización
No anule el propósito de seguridad del enchufe
con polarización o con conexión a tierra. Un
enchufe polarizado tiene dos espigas una más
ancha que la otra. Un enchufe del tipo de
conexión a tierra tiene dos espigas y una clavija
de tierra. La espiga ancha y la clavija de tierra se
proveen para su seguridad. Si el enchufe no
cabe, póngase en contacto con un electricista
para reemplazar el tomacorriente obsoleto.
Este símbolo indica que voltaje peligroso
que puede constituir un riesgo de choque
eléctrico se encuentra presente dentro de
su televisor. Esta etiqueta se encuentra
ubicada en la parte posterior de su
televisor.
Protección del cable de alimentación
Los cables de alimentación deben colocarse de
manera que no se pisen o sean aplastados por
artículos colocados sobre ellos o contra ellos.
Preste atención especial a los cables en los
enchufes, en los receptáculos auxiliares y en el
punto en el que salen de su televisor.
Este símbolo indica que hay instrucciones
importantes de operación y
mantenimiento en la literatura que
acompaña a su televisor.
Advertencia
Aditamentos
Su televisor utiliza soldadura de estaño y plomo y una lámpara
fluorescente que contiene una pequeña cantidad de mercurio.
El deshecho de estos materiales pede ser regulado por
razones ambientales. Para obtener información sobre el
deshecho o reciclaje, póngase en contacto con sus
autoridades locales o la Alianza de Industrias Electrónicas en
No use aditamentos que no hayan sido
recomendados por Insignia ya que podrían
causar peligros.
Lea las instrucciones
Lea todas las instrucciones de seguridad y
operación antes de usar su televisor.
Guarde las instrucciones
Conserve las instrucciones de seguridad y
operación para referencia futura.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Soporte
•
Si su televisor no funciona
normalmente aún siguiendo las
instrucciones de operación. Ajuste
únicamente los controles que están
cubiertos en las instrucciones de
operación, ya que el ajuste incorrecto
de otros controles puede resultar en
daño y frecuentemente requerirá
trabajo intensivo de un técnico
calificado para restaurar la operación
normal del televisor.
No coloque su televisor en un carro, base,
trípode, soporte o mesa inestable. Su televisor
se podría caer y sufrir daños importantes,
además de causar serias lesiones personales.
Usar solamente con carros, bases, trípodes,
soportes, o mesas especificadas por el
fabricante o que se vendan con el televisor. Si
monta su televisor en la pared, siga las
instrucciones del fabricante y use un accesorio
de montaje recomendado por el fabricante. La
combinación del televisor y un carro debe
moverse con cuidado. Las paradas repentinas,
la fuerza excesiva y las superficies irregulares
pueden causar que su televisor y el carro se
volteen de lado.
•
•
Si su televisor se ha caído o dañado
de cualquier forma.
Cuando su televisor exhiba un cambio
significativo en el rendimiento.
Piezas de repuesto
Rayos
Cuando se necesitan repuestos, asegúrese de
que el técnico de reparación use repuestos
especificados por el fabricante o que tengan las
mismas características que la pieza original. Las
substituciones no autorizadas pueden resultar
en incendio, choque eléctrico, lesiones
Para protección adicional del receptor de TV
durante una tormenta eléctrica, o cuando se
deje sin supervisión o sin usar por largos
periodos de tiempo, desconéctelo del
tomacorriente y desconecte la antena o el
sistema de cable. Esto ayudará a evitar daños a
su televisor debido a relámpagos o
personales u otros peligros.
Verificación de seguridad
sobretensiones en las líneas de alimentación.
Después de completar la revisión o reparación
de este televisor, pídale al técnico de servicio
que realice verificaciones de seguridad para
determinar que el televisor se encuentra en
perfecto estado de funcionamiento.
Reparación
No trate de reparar este televisor usted mismo,
ya que abrir o quitar las cubiertas puede
exponerlo a voltajes peligrosos u otros peligros.
Encomiende todas las reparaciones al personal
de servicio calificado.
Fuente de alimentación
Su televisor debe funcionar únicamente con el
tipo de fuente de alimentación indicada en la
etiqueta de marca. Si no esta seguro del tipo de
fuente de alimentación que hay en su casa,
consulte con el vendedor de su televisor o la
compañía de energía local.
Piezas de repuesto
Cuando se necesitan repuestos, asegúrese de
que el técnico de reparación use repuestos
especificados por el fabricante o que tengan las
mismas características que la pieza original. Las
substituciones no autorizadas pueden resultar
en incendio, choque eléctrico, lesiones
Protección de la pantalla
La pantalla de su televisor está hecha de vidrio.
No deje caer su televisor o golpee la pantalla de
vidrio. Si la pantalla se quiebra, tenga cuidado al
recoger el vidrio.
personales u otros peligros.
Sobrecarga
No sobrecargue los tomacorrientes y los cables
de extensión ya que esto resultará en riesgo de
incendio o choque eléctrico.
Defecto de píxel
La pantalla de su televisor está diseñada para
mostrar imágenes finamente detalladas.
Ocasionalmente unos cuantos píxeles inactivos
pueden aparecer en la pantalla como puntos
fijos de color azul, verde o rojo. Este no es un
defecto y no afecta el rendimiento de su
televisor.
Ingreso de objetos y líquidos
Nunca inserte objetos de ningún tipo en su
televisor a través de las ranuras, ya que estos
pueden tocar puntos de voltaje peligrosos o
hacer cortocircuito con otros componentes, lo
cual puede causar un incendio o choque
eléctrico. Nunca derrame líquidos de ninguna
clase sobre su televisor.
Conexión a tierra de la antena exterior
Sí una antena externa o un sistema de cable
esta conectado al televisor, asegúrese de que la
antena o el sistema de cable esta conectado a
tierra, para proveer una protección contra sobre
voltajes y la acumulación de cargas estáticas. El
artículo 810 del código nacional eléctrico,
Daños que requieren reparación
Desconecte este televisor del tomacorriente y
encomiende su reparación a personal calificado
bajo las siguientes condiciones:
•
•
•
Cuando el cable de alimentación o el
enchufe se dañe o se pele.
Si se ha derramado líquido u objetos
han caído dentro de su televisor.
Si el televisor ha sido expuesto a la
lluvia o al agua.
ANSI/NFPA No. 70-1984 proporciona
información con respecto a la correcta conexión
a tierra del poste y la estructura de soporte, la
conexión a tierra del alambre principal de una
unidad de descarga de antena, el tamaño de los
conductores de la conexión a tierra, la ubicación
de la unidad de descarga de antena, la conexión
a los electrodos de conexión a tierra y los
requisitos para el electrodo de conexión a tierra.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Parte superior
7
6
5
4
3
1
2
1
2
Equipo de servicio eléctrico
Sistemas de electrodos de tierra para el
servicio de alimentación eléctrica
1
2
3
4
5
3
4
5
6
7
Abrazaderas de tierra
#
Control
Descripción
Conductores de conexión a tierra
Unidad de descarga de antena
Abrazadera de tierra
1
CANAL+/
CANAL–
Presione estos botones para cambiar el
canal.
En el menú de pantalla, permiten seleccionar
menús y opciones.
Cable conductor de entrada de antena
2
3
VOLUMEN+/
VOLUMEN–
Permiten subir o bajar el volumen.
En el menú de pantalla, permiten ajustar un
control o cambiar un valor.
Nota para el instalador del sistema CATV
MENÚ
Presione para acceder o cerrar el menú de
pantalla.
Este recordatorio se proporciona para que el
instalador del sistema CATV preste atención al
Artículo 820-40 del NEC el cual proporciona
pautas para una correcta conexión a tierra y, en
particular, especifica que la conexión a tierra del
cable debe estar conectada al sistema de tierra
de la edificación, tan cerca al punto de entrada
del cable como sea práctico.
4
5
ENTRADA
Encendido
Permite seleccionar la entrada de video.
Permite encender o apagar su televisor.
Características
Vista frontal
Control
Descripción
1
2
Indicador de
encendido
Se ilumina cuando su televisor está
encendido.
Sensor del
control remoto
Recibe las señales del control remoto.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Paneles laterales posteriores
#
Conector
11 Entrada S-VIDEO
12 VIDEO DE LA ENTRADA AV
13 AUDIO IZQUIERDO DE LA ENTRADA
AV
14 AUDIO DERECHO DE LA ENTRADA AV
15 Interfaz de control RS-232
16 Conector de salida de audio derecho
17 VIDEO DE LA SALIDA AV
18 AUDIO IZQUIERDO DE LA SALIDA AV
19 AUDIO DERECHO DE LA SALIDA AV
20 AURICULARES
21 Conector de salida del parlante
izquierdo
Control remoto
Nota
Para obtener instrucciones acerca de la
programación del control remoto, refiérase a
Remueva
la cubierta
del
conector
#
Conector
1
2
3
4
5
6
7
8
Salida S/PDIF de audio digital (óptica)
EntradaHDMI
Entrada D-SUB AUDIO
Entrada D-SUB PIC (video)
ENTRADA DE COMPONENTE Y
ENTRADA DE COMPONENTE Cb/Pb
ENTRADA DE COMPONENTE Cr/Pr
ENTRADA DE COMPONENTE DE
AUDIO DERECHO
9
ENTRADA DE COMPONENTE DE
AUDIO IZQUIERDO
10 RF (Entrada de antena)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
#
Botón
Descripción
#
Botón
Descripción
23
Permite dejar de reproducir un DVD
o CD si un reproductor de DVD o de
CD está conectado.*
1
2
CONFIGURAR
Permite programar el control
remoto. Para obtener más
información, refiérase a
24
25
Permite avanzar rápidamente una
cinta de video o un DVD.*
Permite saltar al siguiente capítulo o
pista de un DVD.*.
[Botones de
equipos]
TV – Permite seleccionar el televisor.
DVD – Permite seleccionar un
reproductor de DVD conectado.
CBL – Permite seleccionar TV por
cable o satélite.
26 APAGADO
AUTOMÁTICO
Permite configurar el temporizador
de apagado automático. Para
obtener más información, refiérase a
AUX – Permite seleccionar el
dispositivo asignado a este botón.
27 CCD
Permite activar o desactivar los
subtítulos optativos. Para obtener
más información, refiérase a
3
[Botones
numéricos]
Permiten ingresar los números de
canal.
En el menú de pantalla, permiten
ingresar la contraseña del control de
los padres.
28 IMAGEN
Permite seleccionar el modo de
imagen.
4
5
ENTRADA
Permite seleccionar la entrada de
video.
29 CONGELAR
Permite congelar la imagen de video.
Presione el botón nuevamente para
descongelar la imagen. No congele
la imagen de video por periodos de
tiempo extendidos. Esto puede dañar
la pantalla del televisor.
Permite ir al último canal visto.
6
7
8
+ CANAL –
SILENCIAR
MENÚ
Permite cambiar los canales de TV.
Permite silenciar el sonido.
Presione para acceder o cerrar el
menú de pantalla.
30 AUDIO
Permite seleccionar el modo de
sonido.
9
Las flechas permiten moverse hacia
abajo, arriba, izquierda o derecha en
el menú de pantalla.
Presione OK (Aceptar) para
confirmar los cambios o para activar
o desactivar opciones en el menú de
pantalla.
31 A, B, C, D, E
Estos botones no tienen ninguna
función con este televisor. Sin
embargo, se pueden usar con otros
equipos cuando este control remoto
se usa cómo un control remoto
universal. La función exacta
dependerá del equipo específico que
se controle.
ACEPTAR
10
Permite pausar una cinta de video o
un DVD. Presione nuevamente para
continuar con la reproducción.*
* Para que el control remoto controle su reproductor de VCR o
DVD, el control remoto deberá estar programado para operarlo.
Para obtener más información, refiérase a “Programming the
11
12
13
Permite comenzar a grabar una cinta
de video o un DVD.*
Permite retroceder rápidamente un
DVD o una cinta de video.*
Permite saltar al capítulo anterior en
un DVD.*
14 MTS/SAP
Permite seleccionar uno de los
modos de audio predefinidos. Puede
seleccionar entre MONO, STEREO
(Estéreo) y SAP.
15 ZOOM
Permite seleccionar la relación de
aspecto.
16
Permite encender su televisor o
ponerlo en el modo de suspensión.
[Encendido]
17 [LED]
Se ilumina cuando se programa el
control remoto. Para obtener más
información, refiérase a
18
—
Permite seleccionar un sub-canal.
Para obtener más información,
19 + VOL –
20 INFO
Permite ajustar el volumen.
Permite mostrar información de
estado.
21 SALIR
22
Permite cerrar el menú de pantalla.
Permite comenzar a reproducir un
DVD o CD si un reproductor de DVD
o de CD está conectado.*
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Uso del control remoto
Preparación de su televisor
Para usar el control remoto:
Instalación de las pilas del control remoto
•
Apunte el control remoto hacia el sensor de
control remoto al frente de su televisor.
Para instalar las pilas del control remoto:
1 Quite la cubierta de la pilas.
2 Inserte dos pilas AA en el compartimiento de
pilas. Verifique que los símbolos + y – en las
pilas correspondan con los símbolos + y – en
el compartimiento de las pilas.
60°
16.4 pie
s (5 m)
Notas
•
•
•
•
No exponga el control remoto a choques o
líquidos.
No use el control remoto en un área con alta
humedad.
No coloque el control remoto bajo la luz solar
directa.
No coloque objetos, tales cómo muebles, entre
el control remoto y el sensor del control
remoto.
3 Vuelva a colocar la cubierta.
•
Puede ser que el control remoto no funcione si
luz solar directa o luz fuerte brille sobre el
sensor del control remoto. Mueva su televisor o
cambie el ángulo en que usa el control remoto.
Notas
•
•
•
•
No combine pilas de tipos diferentes.
No combine pilas viejas y nuevas.
Saque las pilas cuando se les acabe la carga.
Los químicos de las pilas pueden causar
sarpullido. Si las pilas se derraman, limpie el
compartimiento de pilas con un paño. Si los
químicos tocan su piel, lávese inmediatamente.
Saque las pilas si el control remoto no se va a
usar por un período de tiempo extendido.
•
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
•
•
Si su cable de antena tiene un conector de
75 ohmios, conéctelo al conector coaxial en
la parte posterior de su televisor.
Si su cable de antena tiene un conector de
300 ohmios, conéctelo a un adaptador de
300-75 ohmios (no incluido), conecte el
adaptador a un cable de 75 ohmios, luego
conecte el otro extremo del conector de
75 ohmios al toma coaxial en la parte
posterior de su televisor.
Conexión de su televisor a un
tomacorriente
Para conectar su televisor a un
tomacorriente eléctrico:
•
Enchufe el cable de alimentación en un
tomacorriente.
Notas
•
Verifique que se está usando el tipo de
alimentación correcta. Refiérase a la etiqueta
en su televisor.
Refiérase a la siguiente figura para conectar una
antena exterior:
•
Si no piensa usar su televisor por un período
de tiempo extendido, desenchufe el cable de
alimentación del tomacorriente eléctrico.
Antena combinada
Antena de VHF/UHF
Antena de
VHF/UHF
O
Instalación y conexión de los parlantes
Cable de
75 ohmios
Cable de 300 ohmios
con adaptador
Para instalar y conectar el parlante a su
televisor:
1 Desconecte el cable de alimentación del
televisor y todos los dispositivos que estén
conectados a su televisor.
Antenas separadas
2 Conecte el parlante y la tabla fija al televisor
Antena de
UHF
con los tornillos (suministrados) y ajustelos.
Antena de
VHF
3 Instale las dos cubiertas de conexión sobre
Cable de la
antena
la tablas fijas.
Combinador
4 Conecte los parlantes a los conectores de
parlantes en las partes laterales de su
televisor. Asegúrese de conectar los cables
de audio del parlante a los conectores de
salida del parlante empajerando la polaridad
+ y – de los parlantes de acuerdo con el
color.
O
ENTRADA
SALIDA
Tabla fija
Parlante
Tabla fija
Tornillos
Conexión de TV por cable
Su televisor tiene un conector de 75 ohmios
para conectar TV por cable.
Algunos proveedores de TV por cable codifican
las señales de los canales de pago especial.
Para ver estos canales, necesita una caja
convertidora/decodificadora.
Tornillos
Cubierta de
conexión
Cubierta de
conexión
Si no tiene una caja
convertidora/decodificadora, puede conectar su
TV por cable directamente a su televisor. Si
tiene una caja convertidora/decodificadora,
puede conectar su TV por cable usando un
interruptor de RF (no suministrado). Para
obtener más información sobre como conectar
una caja convertidora/decodificadora, póngase
en contacto con su proveedor de TV por cable.
Conexión de una antena exterior
Hay dos tipos de cables de antena: 75 ohmios y
300 ohmios.
Cable de 75 ohmios
Cable de300 ohmios
Para conectar TV por cable sin usar una caja
convertidora/decodificadora:
1 Conecte un extremo de un cable de
75 ohmios al toma coaxial situado en la parte
posterior de su televisor.
2 Conecte el otro extremo del cable al toma de
pared de TV por cable.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Para conectar TV por cable con una caja
convertidora/decodificadora:
Conexión de un VCR
Puede conectar un VCR con un cable de
audio/video estándar o con un cable de S-Video.
El cable de S-Video no incluye el sonido. Si usa
un cable de S-Video, necesitará usar cables de
audio para conectar la salida del sonido.
•
Refiérase a la siguiente figura para conectar
una caja convertidora/decodificadora. (El
conmutador de RF y el divisor de señal no se
suministran.)
Mueva el conmutador de RF a la posición A
para ver los canales sin codificación usando
el control remoto de su televisor. Mueva el
conmutador de RF a la posición B para ver
los canales codificados usando el control de
la caja convertidora/decodificadora.
Advertencia
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Nota
Para obtener el mejor video, use el conector de
S-Video si su VCR tiene una conexión de S-Video.
Divisor de señal para dos equipos
Conmutador de RF
A
Para conectarse a un VCR y reproducir una
cinta de video:
1 Conecte el cable de audio/video en los
conectores AUDIO L (Izquierdo), AUDIO R
(Derecho) y VIDEO en la parte posterior de
su televisor.
B
Salida
Entrada
TV
2 Conecte el otro extremo del cable de
audio/video en los conectores de salida de
audio y video del VCR.
Caja convertidora/decodificadora
de TV por cable
Conexión a un sistema de sonido
- O -
Conecte los cables de audio cómo se indica
arriba y conecte un extremo de un cable de
S-Video en el conector de S-Video en la
parte posterior de su televisor y el otro
extremo en el conector de S-Video en el
VCR.
Para conectarse a un sistema de sonido:
1 Conecte el cable óptico para S/PDIF en el
conector S/PDIF en la parte posterior de su
televisor.
2 Conecte el otro extremo del cable para
S/PDIF en el conector de entrada S/PDIF en
el sistema de sonido.
3 Encienda su televisor.
4 Presione INPUT (Entrada) repetidamente
para seleccionar Composite1 [Compuesto
1] (o S-Video si conectó el VCR al conector
S-Video).
Advertencia
Verifique que apague y desconecte su televisor
antes de instalar equipos.
5 Encienda su VCR.
Nota
6 Inserte una cinta de video y presione PLAY
En el caso de sistema de teatro en casa, use un
cable S/PDIF (óptico) para obtener la capacidad
completa del sonido.
(Reproducir).
Cable de S-Video
TV
O
Cable de video
Cable de audio
Cable S/PDIF
(óptico)
Y=amarillo (video)
W=blanco (audio izquierdo)
R=rojo (audio derecho)
Conector de
ENTRADA S/PDIF
Procesador de
audio
O
Sistema estéreo
VCR
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Conexión de un VCR (para grabar)
Conexión a un amplificador
Advertencia
Advertencia
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Para conectarse y grabar un programa en un
VCR:
1 Conecte el cable de audio/video en los
conectores AUDIO L (Izquierdo), AUDIO R
(Derecho) y VIDEO en la parte posterior de
su televisor.
Para conectarse a un amplificador:
1 Conecte el cable de audio en los conectores
AUDIO L (Izquierdo) y AUDIO R (Derecho)
en la parte posterior de su televisor.
2 Conecte el otro extremo de los cables de
audio en los conectores de entrada de audio
y video del amplificador.
2 Conecte el otro extremo del cable de
audio/video en los conectores de entrada de
audio y video en el VCR.
TV
3 Encienda su televisor.
4 Seleccione el programa que desea grabar.
5 Encienda el VCR.
6 Inserte una cinta de video, luego presione el
botón de grabar en el VCR.
HEADPHONE
Y=amarillo (video)
Cable de audio
W=blanco (audio izquierdo)
R=rojo (audio derecho)
TV
W=blanco (audio izquierdo)
R=rojo (audio derecho)
HEADPHONE
Cable de audio
Cable de video
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Conexión de una cámara de video
Conexión de un reproductor de DVD
Advertencia
Advertencia
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Para conectarse y reproducir video de una
cámara de video:
Para conectar un reproductor de DVD y
reproducir un DVD:
1 Conecte el cable de audio/video en los
conectores AUDIO L (Izquierdo), AUDIO R
(Derecho) y VIDEO en la parte posterior de
su televisor.
1 Conecte el cable HDMI en el conector HDMI
en la parte posterior de su televisor y al
conector de salida HDMI en la parte posterior
del reproductor de DVD.
2 Conecte el otro extremo del cable de
audio/video en los conectores de salida de
audio y video de la cámara de video.
2 Encienda su televisor.
3 Presione INPUT (Entrada) repetidamente
para seleccionar HDMI.
3 Encienda su televisor.
4 Encienda el reproductor de DVD.
4 Presione INPUT (Entrada) repetidamente
para seleccionar Composite 2 (Compuesto
2).
5 Inserte un DVD y presione Play (Reproducir)
en el reproductor de DVD.
5 Encienda la cámara de video y colóquela en
el modo de salida. Refiérase a los
documentos de la cámara de video para
obtener más información.
TV
6 Inserte una cinta en la cámara de video y
presione Play (Reproducir) en la cámara de
video.
TV
Y=amarillo (video)
W=blanco (audio izquierdo)
R=rojo (audio derecho)
Salida
HDMI
Cable de video
Cable de audio
Nota
Si el reproductor de DVD sólo tiene una salida
DVI, use un cable adaptador de DVI a HDMI (no
suministrado) para conectar el reproductor de
DVD al conector HDMI en la parte posterior de su
televisor. Luego conecte el cable de audio al
conector D-SUB AUDIO IN (Entrada de Audio
D-SUB) en la parte posterior de su televisor.
ENTRADA
SALIDA
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Conexión de un receptor de DTV
Conexión de una computadora
Advertencia
Advertencia
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Verifique que apague y desconecte su televisor
antes de instalar equipos.
Para conectarse a un receptor de DTV y ver
DTV:
Para conectarse y ver video desde una
computadora:
1 Conecte el cable de audio en los conectores
AUDIO L (Izquierdo) y AUDIO R (Derecho)
en la parte posterior de su televisor.
1 Conecte el cable de audio al conector de la
entrada de audio D-SUB en la parte posterior
de su televisor.
2 Conecte el otro extremo de los cables de
audio en el conector de salida de audio en el
receptor de DTV.
2 Enchufe el otro extremo del cable de audio
en el conector de salida de audio en la
computadora.
3 Conecte los cables de video de componentes
en los conectores en la parte posterior de su
televisor.
3 Conecte el cable D SUB en la entrada PIC en
la parte posterior de su televisor.
4 Conecte el otro extremo del cable D SUB en
4 Conecte el otro extremo de los cables de
video de componentes en el conector de
componentes en el receptor de DTV.
el conector D SUB en su computadora.
5 Encienda su televisor.
6 Presione INPUT (Entrada) repetidamente
para seleccionar VGA.
5 Encienda su televisor.
6 Presione INPUT (Entrada) repetidamente
para seleccionar Component1
(Componente 1).
7 Encienda su computadora, luego configure
su computadora para una entrada de VGA
externa. Refiérase a los documentos de su
computadora para obtener más información.
7 Encienda su receptor de DTV.
TV
G=verde (Y)
B=azul (Cb/Pb)
TV
R=rojo (Cr/Pr)
Cables de video de componentes
Cable de audio
R=rojo (audio derecho)
W=blanco (audio izquierdo)
Cable de
audio
Cable D-SUB
Uso del televisor
Encendido y apagado de su televisor
Para encender y apagar su televisor:
1 Verifique que el cable de alimentación está
conectado a su televisor y a un tomacorriente
eléctrico.
2 Presione
para encender su televisor.
de nuevo para apagar su
3 Presione
televisor.
Selección de la fuente de la señal de TV
Para seleccionar la fuente de señal de TV:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Setup (Configuración) y presione OK
(Aceptar) o para abrir el menú Setup.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
3 Presione
o
repetidamente para resaltar
Agregando o eliminando canales
manualmente de la lista de canales
Después de crear una lista de canales usando la
opción “Auto Ch Search”, puede agregar o
eliminar canales de la lista de canales.
Tuning Band (Banda de Sintonización) y
presione OK (Aceptar) o para acceder a las
opciones de la banda de sintonización.
Para agregar o borrar canales:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Setup (Configuración) y presione OK
(Aceptar) o para abrir el menú Setup.
3 Presione
o
repetidamente para resaltar
Manual Ch Set (Establecimiento Manual de
Canales), luego presione OK (Aceptar) o
para acceder a las opciones del
4 Seleccione Air (Aire) en el caso de una
antena exterior, o seleccione Cable, Cable
HRC, Cable IRC o Cable Auto para TV por
cable. Le recomendamos que seleccione
Cable Auto para TV por cable. Para obtener
más información sobre las selecciones de TV
por cable, póngase en contacto con su
proveedor de TV por cable.
establecimiento manual de canales.
5 Presione EXIT (Salir) para cerrar el menú de
pantalla.
Configuración de la lista de canales
Después de seleccionar su fuente de señal de
TV (antena o cable), necesitará configurar la
lista de canales. Cuando configure la lista de
canales, su televisor buscará todos los canales
disponibles en su área y guardará una lista de
los canales. Cuando presione
4 Presione
o
para seleccionar un canal y
luego presione OK (Aceptar) para agregar o
eliminar un canal.
5 Presione EXIT (Salir) para cerrar el menú.
Cambio de canales
CH – o +, su televisor se saltará los canales que
no tienen señal.
Para cambiar los canales:
Configuración automática de canales
•
Presione CH – o + en el control remoto para
ir al siguiente canal más abajo o más arriba.
Para configurar automáticamente la lista de
canales:
O
Presione los botones numéricos para
seleccionar un canal (por ejemplo, si desea
ver el canal 83, presione 8, y luego 3).
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Setup (Configuración) y presione OK
O
(Aceptar) o para abrir el menú Setup.
Presione
para ir al último canal visto.
3 Presione
o
repetidamente para resaltar
Auto Ch Search (Búsqueda Automática de
Selección de un sub-canal digital
Canales).
La mayoría de canales de TV digital tienen más
de un canal. El canal principal lleva la señal del
programa de TV principal. Los sub-canales
llevan las señales para programación adicional o
alternativa, tal cómo transmisiones de radio o
noticias.
Por ejemplo, si el número de canal principal es
8, el número de sub-canal puede ser 8-1, 8-2 ó
8-3.
Para seleccionar un sub-canal:
1 Presione los botones numéricos del canal
4 Presione OK (Aceptar) o para comenzar la
principal (por ejemplo 8).
búsqueda.
2 Presione –, luego presione el botón del
Nota
sub-canal (por ejemplo 1).
Puede presionar Exit (Salir) para detener la
búsqueda.
Ajuste del volumen
Para ajustar el volumen:
•
Presione VOL – o + para bajar o subir el
volumen.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
•
Presione MUTE (Silenciar) para desactivar el
sonido. Presione MUTE (Silenciar) de nuevo
para reactivar el sonido.
3 Presione
o
repetidamente para resaltar
Setup (Configuración) y presione OK
(Aceptar) o para abrir el menú Channel
Labels (Etiquetas de canal).
Visualización de la información de estado
Para mostrar información de estado:
•
Presione INFO. Su televisor mostrará
información de estado, tal cómo el número
de canal o la fuente de la señal.
Selección de la fuente de entrada de video
Para seleccionar la fuente de entrada de
video:
•
Presione INPUT (Entrada) repetidamente
para seleccionar la fuente de video. Se
puede seleccionar:
4 Presione
the or
or character.
o
para mover el cursor. Press
button select a channel number
•
•
•
•
TV–Señal de TV
Composite1––Conectores AV INPUT1
Composite2–Conectores AV INPUT2
Component1–ConectoresCOMPONENT
INPUT1
•
Component2–ConectoresCOMPONENT
INPUT2
5 Presione OK (Aceptar) para regresar al
menú anterior, o presione EXIT (Salir) para
ocultar el sistema de menú.
•
•
•
VGA–Conector D-SUB (computadora)
HDMI–Conector HDMI
S-Video–Conector S-Video
Congelamiento de la imagen
Verificación de la intensidad de la señal de
DTV
Puede congelar (detener) la imagen en la
pantalla.
Para verificar la intensidad de la señal de
DTV:
1 Presione MENU (Menú).
Cuidado
Para proteger su televisor, no congele la imagen
en pantalla por periodos de tiempo extendidos.
2 Presione
o
repetidamente para resaltar
Para congelar o descongelar la imagen:
Setup (Configuración) y presione OK
•
Presione FREEZE (Congelar).
(Aceptar) o para abrir el menú Setup.
Ajuste del reloj
3 Presione
o
repetidamente para resaltar
DTV Signal (Señal de DTV) y luego presione
OK (Aceptar) o . Su televisor mostrará la
intensidad de la señal de DTV.
Puede ajustar el reloj automáticamente con la
señal de un canal digital. Su televisor busca un
canal digital que tenga información de tiempo
codificada. Si el reloj no muestra la hora correcta
después de ajustarlo automáticamente, puede
ajustar el reloj manualmente.
Ajuste automático del reloj
Para ajustar automáticamente el reloj:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Feature (Función) y presione OK (Aceptar) o
para abrir el menú Feature.
3 Presione
o
repetidamente para resaltar
Time Set (Ajuste de hora) y presione OK
(Aceptar) o para abrir el menú Time Set.
Agregando una etiqueta de canal
Para agregar una etiqueta a un canal:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Setup (Configuración) y presione OK
(Aceptar) o para abrir el menú Setup.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
4 Presione
o
repetidamente para resaltar
Time Set Mode (Modo de Ajuste de Hora),
luego presione OK (Aceptar) o para
seleccionar Auto.
3 Presione
o
repetidamente para resaltar
Sleep Timer (Temporizador de apagado
automático) y presione OK (Aceptar) o
para seleccionar la cantidad de tiempo. Para
desactivar el temporizador, seleccione Off
(Desactivado).
5 Presione
o
repetidamente para resaltar
Time Zone (Zona Horaria), luego presione
OK (Aceptar) o para seleccionar una de las
siguientes zonas horarias: Pacific (Pacifico),
Alaska, Hawaii (Hawai), Eastern (Del Este),
Central (Del Centro) o Mountain (De las
rocosas).
Nota
También puede presionar SLEEP (Apagado
automático) para ajustar el temporizador de
apagado automático.
6 Presione EXIT (Salir) para cerrar el menú de
pantalla.
Visualización de subtítulos optativos
Ajuste manual del reloj
Puede ver los subtítulos optativos en dos
modos: CAPTION (Subtítulo) y TEXT (Texto).
Cada modo tiene cuatro canales. El modo
CAPTION muestra los diálogos y comentarios
de los programas de TV mientras provee una
imagen clara del programa. El modo TEXT
muestra información que no está relacionada
con el programa, tal cómo horarios de
Para ajustar el reloj manualmente:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Feature (Función) y presione OK (Aceptar) o
para abrir el menú Feature.
3 Presione
o
repetidamente para resaltar
Time Set (Ajuste de hora) y presione OK
programación de TV y pronósticos del tiempo.
En el modo TEXT, una parte de la imagen se
puede cubrir con el texto.
(Aceptar) o para abrir el menú Time Set.
4 Presione
o
repetidamente para resaltar
Time Set Mode (Modo de ajuste de hora),
luego presione OK (Aceptar) o para
seleccionar Manual.
Nota
En el caso de sistemas de transmisión digital,
puede presionar CCD en el control remoto para
seleccionar el modo de subtítulos optativos.
Para personalizar los subtítulos optativos, use el
submenú Closed Caption Options (Opciones de
subtítulos optativos) en el menú Feature
(Función).
Para ver los subtítulos optativos:
•
Presione CCD repetidamente para
seleccionar un modo de subtítulos optativos.
Se puede seleccionar:
5 Presione
o
para seleccionar Year
•
•
•
•
•
•
•
•
•
CC1
CC2
CC3
CC4
(Año), Date (Fecha), o Time (Hora), luego
presione OK (Aceptar),
año, la fecha o la hora.
o
para ajustar el
6 Presione EXIT (Salir) para cerrar el menú de
pantalla.
TEXT1
TEXT2
TEXT3
TEXT4
Off (Desactivado)
Ajuste del temporizador de apagado
automático
El temporizador de apagado automático le
permite seleccionar la cantidad de tiempo que
transcurrirá antes de que su televisor se apague
automáticamente.
Para ajustar el temporizador de apagado
automático:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Feature (Función) y presione OK (Aceptar) o
para abrir el menú Feature.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
6 Presione el número de botones para ingresar
una contraseña nueva, luego ingrese la
Configuración de los controles de los
padres
contraseña nueva de nuevo para confirmar.
Su televisor tiene un V-chip que le permite
controlar el tipo de programas que sus niños
pueden ver. Los controles de los padres
incluyen dos clasificaciones: La MPAA (basada
en la edad) y las TV Parental Guidelines [Pautas
de TV para los padres] (basadas en el contenido
y la edad). Un programa de TV puede tener una
clasificación de MPAA o de “TV Parental
Guidelines”, así que deberá configurar los
controles para las dos clasificaciones.
Antes de que seleccione las clasificaciones,
necesitará configurar una contraseña para los
controles de los padres.
Cuidado
Para establecer una contraseña:
Escriba su contraseña y guárdela para uso futuro.
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Nota
Feature (Función) y presione OK (Aceptar) o
Si olvida su contraseña, ingrese 1397 cómo
contraseña antigua e ingrese una contraseña
nueva. Esta contraseña siempre será valida para
restablecer su contraseña.
para abrir el menú Feature.
3 Presione
o
repetidamente para resaltar
Parental Control (Control de los padres) y
presione OK (Aceptar) o para abrir el menú
Parental Control (Control de los padres).
Clasificaciones MPAA
Clasificación Descripción
NONE
(Ninguna)
Sin clasificación.
G
Público en general.
PG
Se sugiere el consejo de los padres.
Contiene material que los padres
pueden considerar inadecuado para los
niños.
PG-13
R
Se recomienda fuertemente la
supervisión de los padres. Este
programa contiene material que los
padres pueden considerar inadecuado
para niños menores de 13 años.
4 Presione
o
repetidamente para resaltar
Password Change (Cambio de contraseña)
y presione OK (Aceptar) o para acceder la
opción de cambio de contraseña.
Restringido. No se recomienda para
niños menores de 17 años a menos
que estén acompañados por un padre
o un custodio.
NC-17
X
No se recomienda para niños menores
de 17 años.
Sólo para adultos.
Clasificaciones de “TV Parental Guidelines”
(Pautas de TV para los padres)
5 Presione los botones numéricos para
ingresar la contraseña antigua. Si no ha
configurado una contraseña, ingrese 0000.
Clasificación Descripción
NONE
(Ninguna)
Sin clasificación.
TV-Y
Todos los niños.
TV-Y7
Dirigido a niños mayores de siete
años.
TV-G
Público en general.
TV-PG
TV-14
TV-MA
Se sugiere el consejo de los padres.
Enérgico aviso para los padres.
Adultos solamente.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Algunas de las clasificaciones “TV Parental
Guidelines” basadas en edad también tienen
clasificaciones basadas en el contenido.
Uso del menú de pantalla (OSD)
Su televisor tiene un menú de pantalla que le
permite ajustar los controles del televisor, tal
cómo los ajustes de video y audio.
Clasificación Descripción
Para usar el menú de pantalla:
1 Presione MENU (Menú).
FV
L
Violencia de fantasía.
Lenguaje vulgar.
2 Presione
o
repetidamente para
S
Situaciones sexuales.
Violencia.
seleccionar un menú.
V
3 Presione
o
para navegar a una
D
Diálogo sexualmente sugestivo.
opción o ajustar una opción.
Para ajustar las clasificaciones:
1 Presione MENU (Menú).
2 Presione
o
repetidamente para resaltar
Feature (Función) y presione OK (Aceptar) o
para abrir el menú Feature.
3 Presione
o
repetidamente para resaltar
Parental Control (Control de los padres) y
presione OK (Aceptar) o para abrir el menú
Parental Control.
4 Presione
o
repetidamente para resaltar
Parental Control Set (Ajuste del control de
los padres), luego Presione OK (Aceptar) o
para acceder a la función de clasificación.
5 Ingrese la contraseña.
Nota
Para encontrar las contraseñas predefinidas,
4 Presione OK (Aceptar) o para confirmar un
ajuste, abrir un submenú o conmutar un
ajuste.
6 Presione
o
para seleccionar una
clasificación, luego presione OK (Aceptar)
para bloquear o desbloquear la clasificación.
5 Presione MENU (Menú) para regresar al
menú anterior o EXIT (Salir) para ocultar el
sistema de menú de pantalla.
Cuando bloquea una clasificación, se
bloqueará dicha clasificación y todas las
clasificaciones por encima de ella.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Menús de pantalla
Menú de
pantalla
Opciones
Menú de
Opciones
pantalla
Audio
Sound Mode (Modo de sonido) –Selecciona el
modo de sonido: User (Usuario), News
(Noticias), Music (Música) o Movie (Película).
También puede presionar AUDIO para
seleccionar el modo de sonido.
Bass (Graves) – Ajusta los sonidos graves.
Treble (Agudos) – Ajusta los sonidos agudos.
Balance – Ajusta el volumen del parlante
derecho y el izquierdo.
Earphone Vol (Volumen de auricular) – Ajusta
el volumen del auricular.
(Las opciones
pueden variar en
diferentes
Video
Picture Mode (Modo de Imagen) – Selecciona
el modo de imagen: User (Usuario), Nature
(Naturaleza), Soft (Suave) o Bright (Brillante).
También puede presionar PICTURE (Imagen)
para seleccionar el modo de imagen.
(Las opciones
pueden variar en
diferentes
modos.)
modos.)
Contrast (Contraste) – Aumenta el nivel de la
imagen para ajustar sus áreas blancas. Reduce
el nivel de la imagen para ajustar las áreas
negras.
Brightness (Brillo) – Aumenta el brillo para
agregar más luz a las áreas oscuras de la
imagen. Reduce el brillo para agregar más
oscuridad a las áreas iluminadas de la imagen.
Digital Audio Output (Salida de audio digital) –
Selecciona el modo de audio para el conector
S/PDIF.
• RAW (En bruto): Entrada AC-3 – Salida
AC-3/Entrada PCM – Salida PCM.
• PCM (Pulse Code Modulation)
[Modulación por impulsos codificados]:
Entrada AC-3 – Salida PCM / Entrada
PCM – Salida PCM.
Color – Ajusta el color global de la imagen.
Sharpness (Nitidez) – Aumenta el nivel de
nitidez para mostrar imágenes más limpias y
claras. Reduce el nivel para mostrar una
imagen más suavizada.
MTS – Selecciona el sonido de TV multicanal
(MTS): Mono, Stereo (Estéreo) o SAP
(Programa de audio secundario). También
puede presionar MTS/SAP para seleccionar el
modo MTS.
Aspect Ratio (Relación de aspecto) –
Selecciona la relación de aspecto de la pantalla:
Wide (Ancha), Cinema, Normal o Zoom.
También puede presionar ZOOM para
seleccionar la relación de aspecto.
Audio Language (Idioma del audio) –
Selecciona un idioma alterno si el programa
tiene más de un idioma.
Advanced Video Menu (Menú de video
avanzado) – Provee acceso a las funciones
avanzadas:
• Noise Reduction (Reducción de ruido)
– Reduce el ruido de la imagen (nieve).
• Tint (Tono) – Aumenta el nivel de color
para agregar más verde a los tonos de
piel. Reduce el nivel de color para
agregar más violeta a los tonos de piel.
• Color Temperature (Temperatura de
color) – Selecciona uno de tres ajuste
de color automáticos: Cool (Frío) para
más azul, Warm (Caliente) para más
rojo y Normal.
Configuración
Tuning Band (Banda de sintonización) –
Selecciona la fuente de señal del TV. Para
obtener más información, refiérase a
DTV Signal (Señal DTV) – Muestra la
intensidad de la señal de TV digital. Para
obtener más información, refiérase a
Auto Ch Search (Búsqueda automática de
canales) – Configura automáticamente una
lista de los canales disponibles en su área. Para
obtener más información, refiérase a
Manual Ch Set (Establecimiento manual de
canales) – Le permite agregar o eliminar
canales de la lista de canales. Para obtener más
• 3D Y/C – Activa o desactiva el filtro tipo
peine 3D.
VGA Set/Component Set (Ajustar VGA/Ajustar
Componente) – Si su televisor está conectado
a una computadora o a video de componentes,
ajusta las siguientes opciones:
• H-Pos (Posición H) – Ajusta la posición
horizontal de la imagen.
• V-Pos (Posición V) – Ajusta la posición
vertical de la imagen.
• Clock (Reloj) – Ajusta la frecuencia de
muestreo.
Channel Labels (Etiquetas de canal) – Le
permite agregar una etiqueta a un canal. Para
• Phase (Fase) – Mejora el foco de una
imagen estable.
• Setting (Ajuste) – Regresa el modo VGA
a los valores de fábrica.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
5 Ingrese el primer código de cinco dígitos
para su equipo. El indicador LED parpadeará
una vez cada vez que se ingresa un dígito. Si
el código es el correcto, el indicador LED
parpadeará dos veces.
Menú de
pantalla
Opciones
Función
Source (Fuente) – Selecciona la fuente de la
señal de video. Se puede seleccionar:
• TV
• Composite1 (Compuesto 1)
• Composite2 (Compuesto 2)
• Component1 (Componente 1)
• Component2 (Componente 2)
• VGA
Nota
Si el indicador LED no parpadea dos veces, repita
los pasos 3 al 5 usando un código diferente.
6 Apunte el control remoto al equipo y presione
• HDMI
. El equipo se debería apagar.
• S-Video
También puede presionar INPUT (Entrada) para
seleccionar la fuente de la señal de video.
Nota
Si el equipo no se apaga, repita los pasos 4 al 6
usando otro código. Si no puede encontrar un
código que funcione, refiérase a “Searching for a
Time Set (Ajuste de la hora) – Ajusta el reloj.
Para obtener más información, refiérase a
Sleep Timer (Temporizador de apagado
automático) – Ajusta el temporizador de
apagado automático. Para obtener más
Parental Control (Control de los padres) –
Accede los controles del V-chip. Para obtener
7 Repita los pasos 1 al 6 para programar
equipos adicionales.
8 Presione SET (Establecer) para guardar el
código y salir.
Nota
Para referencia futura, escriba cada código que
funciona.
Closed Caption Options (Opciones de
subtítulos optativos) – Personaliza los
subtítulos optativos para los sistema de
transmisión digital. Puede ajustar el tamaño, la
fuente, el color del texto, la opacidad del texto,
el color de fondo, la opacidad del fondo, el
efecto del borde, y el color del borde.
CC when Mute (Subtítulos codificados cuando
está silenciado)–Muestra automáticamente los
subtítulos optativos cuando se silencia el
volumen.
Búsqueda de un código
Para buscar un código:
1 Presione el botón de un equipo.
2 Mantenga presionado SET (Establecer)
hasta que el indicador LED parpadee dos
veces, luego suelte el botón.
3 Ingrese 991, luego el número de grupo del
equipo (0=cable, 1=TV, 2=VCR, 3=audio). El
indicador LED parpadeará dos veces.
Menu Language (Idioma del menú) – Permite
seleccionar el idioma para de menú de pantalla.
Puede seleccionar English (inglés), French
(francés) o Spanish (español).
4 Apunte el control remoto al equipo y presione
. Si el equipo responde, vaya al paso 7.
Programación del control remoto
5 Si el equipo no responde, presione CH+. Su
control remoto probará el siguiente código.
Mantenga presionado CH+ hasta que el
equipo responda. Puede presionar CH– para
probar un código anterior.
Programación de un equipo conectado a su
televisor
El control remoto puede controlar cuatro
dispositivos, tal cómo un VCR, un reproductor
de DVD, un receptor de cable o satélite, un
amplificador o sintonizador, o un equipo similar.
6 Para buscar un código para otro equipo,
repita los pasos 1 al 5.
7 Presione SET (Establecer) para guardar el
Para programar el control remoto:
código y salir.
1 Encuentre el código para el dispositivo que
más de un código listado para un equipo,
escriba todos los códigos.
Verificación del código
Si programó un equipo buscando el código, le
podría gustar saber que código de 4 dígitos está
usando el control remoto.
2 Encienda el equipo que desea programar, y
cargue medios si es necesario (por ejemplo
un DVD).
Para revisar el código:
1 Presione el botón del equipo en el control
remoto.
3 Presione un botón de equipo en el control
remoto (por ejemplo DVD, CBL o AUX).
2 Mantenga presionado SET (Establecer)
hasta que el indicador LED parpadee dos
veces, luego suelte el botón.
4 Mantenga presionado SET (Establecer) en el
control remoto hasta que el indicador LED
parpadee dos veces, luego suelte el botón.
3 Ingrese 990. El indicador LED parpadeará
dos veces.
4 Presione 1 y cuente las veces que parpadee
el indicador LED. Este es el primer dígito del
código (por ejemplo, si el indicador LED
parpadea dos veces, el primer dígito es 2. Si
el LED no parpadea, el primer dígito es 0).
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
5 Repita el paso 4 usando 2 para el segundo
dígito, 3 para el tercer dígito, 4 para el cuarto
dígito, y 5 para el quinto dígito.
Limpieza de su televisor
Limpie la pantalla y el gabinete con un paño
suave y sin pelusa. Si la pantalla o el gabinete
se encuentran especialmente sucios,
6 Presione SET (Establecer) para salir.
humedezca un paño suave y sin pelusa en una
solución detergente suave, exprima el exceso de
humedad del paño y limpie la pantalla o el
gabinete con el paño. Use un paño limpio para
secar la pantalla o el gabinete.
Programación del bloqueo de volumen
El control remoto viene preconfigurado para
dejarle controlar el volumen de cada equipo
conectado. Puede cambiar el bloqueo de
volumen para que el volumen de un equipo
controle el volumen en todos los modos.
Después de bloquear el control de volumen,
puede desbloquearlo para un equipo específico
para que pueda controlar el volumen de ese
equipo independientemente.
Cuidado
Evite lo siguiente, ya que puede dañar su
televisor:
•
•
•
Limpiar su televisor con sustancias
inflamables, tal como repelentes de insectos,
solventes y diluyentes.
Dejar su televisor en contacto con objetos
hechos de hule o PVC por periodos de tiempo
extendidos.
Para bloquear el control de volumen a un
solo equipo:
1 Mantenga presionado SET (Establecer)
hasta que el indicador LED parpadee dos
veces, luego suelte el botón.
Dejar que líquidos goteen dentro del gabinete.
Localización y corrección
de fallas
2 Ingrese 993, luego presione el botón del
equipo del cual quiere controlar el volumen.
El indicador LED parpadeará dos veces.
Cuando presione VOL+, VOL–, o MUTE
(Silenciar) en el control remoto, el equipo
seleccionado controlará el volumen sin
importar que equipo esté usando.
Advertencia
No intente reparar su televisor usted mismo.
Refiera toda reparación a un técnico de servicio
calificado.
Para desbloquear el control de volumen:
Síntoma
Solución probable
1 Mantenga presionado SET (Establecer)
hasta que el indicador LED parpadee dos
veces, luego suelte el botón.
La unidad no enciende
• Verifique que el cable de
alimentación está conectado a
su televisor y a un
tomacorriente eléctrico.
• Desconecte el cable de
alimentación, espere 60
segundos, luego reconecte el
cable y encienda su televisor.
2 Ingrese 993, luego presione VOL+. El
indicador LED parpadeará cuatro veces. El
control de volumen se desbloqueará.
Para desbloquear el control de volumen de
un solo equipo:
1 Presione el botón del equipo.
No hay imagen
• Verifique que los cables de
video están conectados
firmemente en la parte
2 Mantenga presionado SET (Establecer)
hasta que el indicador LED parpadee dos
veces, luego suelte el botón.
posterior de su televisor.
• Ajuste el contraste y el brillo.
• Verifique que se seleccionó el
modo de video correcto.
• Verifique que la señal de
entrada es compatible.
3 Ingrese 993, luego presione VOL–. El
indicador LED parpadeará cuatro veces. El
control de volumen para el equipo que ha
seleccionado estará desbloqueado.
Buena imagen, pero no
hay sonido
• Suba el volumen.
• Verifique que el sonido no esté
silenciado.
Mantenimiento
• Verifique que se seleccionó el
modo de audio correcto.
•
No utilice su televisor en áreas que son
demasiado calientes o frías porque el
gabinete se puede doblar o la pantalla puede
funcionar mal.
Buen sonido pero color
deficiente
• Ajuste el contraste, el color y el
brillo.
Imagen insatisfactoria
• Verifique que la habitación no
es muy brillante. La luz
reflejándose en la pantalla
puede hacer que sea difícil ver
la imagen.
•
Temperaturas de almacenamiento son
32° a 122 °F (0° a 50 °C).
•
Temperaturas de funcionamiento son 41
°F a 104 °F (5° a 40 °C).
• Si una cámara S-VHS o una
cámara de video se conectan
mientras se enciende otro
equipo conectado, puede ser
que la imagen se vea
•
No coloque su televisor bajo luz solar directa
ni cerca de una fuente de calor.
insatisfactoria. Apague uno o
más equipos.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Síntoma
Solución probable
Especificaciones
Línea punteada
horizontal
• Puede ser que su televisor se
encuentre demasiado cerca de
otro equipo eléctrico, tal cómo
una secadora de pelo o una luz
neón. Apague el equipo o
•
El diseño y las especificaciones están
sujetos a cambio sin aviso previo.
•
El peso y las dimensiones listadas son
aproximados.
mueva su televisor.
Fuente de
100 - 240 V CA 50/60 Hz
200 W
El control remoto no
funciona
• Presione TV.
alimentación
• Reemplace las pilas.
Compruebe que los símbolos +
y – en las pilas correspondan
con los símbolos + y – en el
compartimiento de las pilas.
• Limpie el sensor del control
remoto en el frente de su
televisor.
Consumo de
energía
Pantalla
37 pulgadas
Rango de canales VHF: 2-13
UHF: 14-69
CATV: 1-125
CADTV: 1-135
DTV: 2-69
• Iluminación brillante o
fluorescente puede interferir
con la señal del control remoto.
Apague la luz o mueva su
televisor.
Peso
70.4 lb (31.93 kg)
Dimensiones
Ancho × Alto ×
Profundidad
37.2 × 28.9 × 12.2 pulgadas
(944.9 ×734.1 ×309.9 mm)
Imagen con nieve o
ruido
• Asegúrese de que los cables de
A/V estén bien y firmemente
conectados.
Temperatura
Almacenamiento -32 a 122°F (0 a
50°C).
Funcionamiento – 41 a 104°F (5 a
40°C).
La imagen VGA no es
estable o no está
sincronizada
• Verifique que se ha
seleccionado el modo de VGA
correcto en su computadora.
No hay salida de uno de
los parlantes
• Ajuste el balance en el menú
Sistema de TV
Accesorios
NTSC-M, ATSC
Sound (Sonido).
Guía del usuario
Control remoto
Pilas (2 tipo AA)
Los botones de control
no funcionan
• Desconecte el cable de
alimentación por unos
segundos y luego reconecte el
cable y encienda su televisor.
Aparecen imágenes
permanentes
• No muestre una imagen fija, tal
como un logotipo, un juego,
una imagen de computadora
por un periodo de tiempo
extendido. Esto puede causar
que una imagen permanente se
queme en la pantalla. Este tipo
de daño no está cubierto por su
garantía.
El televisor produce
ruidos como un “clic”
• Estos sonidos ocurren cuando
el gabinete de su televisor se
expande o contrae debido a
cambios en la temperatura.
Esto no es un mal
funcionamiento.
Control remoto
El indicador LED no
parpadea cuando se
presiona un botón
Reemplace las pilas.
El indicador LED
Verifique de que se encuentra a menos
de 15 pies (4.6 metros) del equipo y
parpadea cuando se
presiona un botón, pero que apunte el control remoto al sensor
el equipo no responde
del control remoto en el equipo.
El indicador LED se
mantiene iluminado
Presionó un botón incorrecto.
Comience el procedimiento de nuevo.
El control remoto no
controla un equipo o
sólo controla ciertas
funciones del equipo
Verifique que el equipo cuenta con un
sensor de control remoto, luego
pruebe con otro código.
No hay volumen en un
equipo
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Radio Shack
RCA
31263
Apéndice
31023, 31609, 31254, 30531, 31074
Códigos para amplificadores de audio
Sharper Image
Silsonic
Sony
31263
30176
Bose
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
31258, 31759
30670
GE
Soundesign
Stereophonics
Sunfire
JVC
31023
Marantz
Nakamichi
NEC
31313
Teac
31074, 31267
31308, 31518, 30039
31189
Technics
Thorens
Victor
Optimus
Realistic
Sansui
Shure
30074
Wards
30014
Yamaha
30176, 31276, 31176
Sony
Soundesign
Victor
Códigos para convertidores de cable
Wards
Yamaha
ABC
00003, 00008, 00014
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Daeryung
Digi
00899
00014
Códigos para amplificador de audio /
sintonizador
00899
00883
00883
ADC
30531
00883
Aiwa
31405, 31243, 30121
01877, 00877, 00477, 00008
Anam
31609, 31074
00637
Audiotronic
Bose
31189
Director
Dumont
Gehua
00476
31229
00637
Capetronic
Carver
30531
00476
31189
General
00476, 00810, 00276, 00003, 00014
Coby
31263
Instrument
Denon
31360, 31142, 30904
GoldStar
Hamlin
Hitachi
Jerrold
00144
Fonmix
Glory Horse
Harman/Kardon
Hitachi
Inkel
31360
00009, 00273
00014
31263
30110
00476, 00810, 00276, 00003, 00012,
00014
31273
30027
KNC
00008
Integra
JBL
30135
LG
00144
30110
Memorex
Motorola
MultiVision
Pace
00000
JVC
30074, 31263
31313, 31570, 30027
31428
00476, 00810, 00276, 01254, 01376
Kenwood
KLH
00012
01877, 00237
00000, 00008, 00107
00637
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
Panasonic
Panther
Paragon
Philips
00000
Onkyo
30842, 30135
31023, 30670, 30531, 31074
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
00317, 01305
01877, 00877, 00144, 00533
00000
Optimus
Panasonic
Philips
Pioneer
Proscan
Qisheng
Quasar
Pioneer
Pulsar
Quasar
Radio Shack
Regal
00000
00883
00279, 00273
00000
31609
Runco
30039
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Samsung
00000, 00144
Pioneer
Polk Audio
Proton
31063, 31062, 30032
Scientific Atlanta 01877, 00877, 00477, 00008
30157
Sony
01006
30157
Starcom
Supercable
Supermax
Tocom
Torx
00003, 00014
00276
QED
30157
Quad
30157
00883
Quasar
Radio Shack
RCA
30029
00012
31075
00003
31062, 30032, 30420, 30179, 30053
Toshiba
Trans PX
Tristar
00000
Realistic
Rotel
30420, 30179
30157, 30420
30157
00276
00883
SAE
TS
00003
Sansui
30157
V2
00883
Sanyo
30179
Viewmaster
Vision
00883
SAST
30157
00883
Sharp
30861, 30037
30888, 30036
30157
Vortex View
Zenith
00883
Silsonic
Sonic Frontiers
Sony
00000, 00525, 00899
30490, 30000, 30100
30145
Soundesign
TAG McLaren
Tascam
Teac
Códigos para reproductor de CD
30157
Aiwa
30157
30420
30029
30420
Burmester
30420
California Audio
Labs
Technics
Victor
30029
30072
Carver
Denon
DKK
30157, 30179
30873
Wards
30157, 30053
30888, 30036
30157
Yamaha
Zonda
30000
DMX Electronics 30157
Dynamic Bass
Fisher
30179
Códigos para reproductor de DVD
30179
Garrard
30420
Aiwa
20641, 21912
20770
Genexxa
Harman/Kardon
Hitachi
30032
Akai
30157, 30173
30032
Allegro
Apex Digital
20869
20672, 20717, 20797, 21061, 20796,
21056, 21937, 20794, 21020, 21915
Integra
30101
JVC
30072
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
20717
Kenwood
30826, 30626, 30028, 30037, 30036,
30190
20571
20695
Krell
30157
20627, 21061
Linn
30157
20869
Magnavox
Marantz
MCS
30157
21086
30626, 30029, 30157
30029
Curtis Mathes
CyberHome
Daewoo
21087
21024, 21023, 21129, 20816, 21117
Miro
30000
20833, 21172, 20869
20490
Mission
MTC
30157
Denon
30420
DVD2000
Emerson
Enterprise
Fisher
20521
NSM
30157
20591, 20675
20591
Onkyo
Optimus
30868, 30101
31063, 30000, 30032, 30037, 30420,
30179, 31075, 30145
21919
Funai
20675
Panasonic
Parasound
Philips
30029
Gateway
GE
21158, 21073
20522, 20717
30420
30626, 30157
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Go Video
20744, 20833, 21099, 20783, 21075,
20869, 21730
Symphonic
Teac
20675
20717, 21984, 20809
20490
Greenhill
Harman/Kardon
Hitachi
20717
Technics
Theta Digital
Toshiba
20582, 20702
20571
20573, 20664, 21919
20503, 20695
20503
Hiteker
20672
Urban Concepts
Xbox
Initial
20717
20522
Integra
JBL
20627, 21924
Yamaha
20490, 20539, 20545
20503, 20591, 20869
20702
Zenith
JVC
20558, 20623, 20867
Kenwood
KLH
20490, 20534
Códigos para receptor de satélite
20717, 21020, 21149
Koss
20651, 21980
AlphaStar
Chaparral
Crossdigital
DirecTV
00772
00216
01109
Lasonic
LG
20798
20591, 20869, 20801
Liquid Video
Lite-On
Loewe
21980
00392, 00566, 00639, 01142, 00247,
00749, 01749, 00724, 00819, 01856,
01076, 01109, 00099, 01392, 01640,
01442, 01414, 01108
21158, 21058
20511
Magnavox
Marantz
Memorex
Microsoft
Mintek
20503, 20539, 21976, 21914, 20675
Dish Network
System
01005, 00775, 01505
20539
Dishpro
Echostar
Expressvu
GE
01005, 00775, 01505
01005, 00775, 01505
00775
20695
20522
20717
00566
Mitsubishi
Nesa
21521, 20521
General
Instrument
00869
20717
Norcent
Onkyo
21003
GOI
00775
20503, 20627, 21924, 20792
Goodmans
Hisense
Hitachi
HTS
01246
Oritron
Panasonic
Philips
20651, 21980
01535
20490, 21762, 21990
00819, 00222, 01250
00775
20503, 20539, 20646, 21914
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
20525, 20571
Hughes Network 01142, 00749, 01749, 01442
Systems
21086, 21061
20539
I-Lo
01535
20770
JVC
00775
20522
LG
01414, 01226
00724, 00722
00724
20651
Magnavox
Memorex
Mitsubishi
Motorola
NEC
20522, 20571, 20717, 20822
Rio
20869
00749
Rotel
20623
00869
Sampo
Samsung
Sansui
20752, 20698
01270
20490, 20573, 21932, 21075, 20820
Next Level
Panasonic
Paysat
00869
20695
00247, 00701
00724
Sanyo
20695
Sharp
20630, 20752
Philips
01142, 00749, 01749, 00724, 01076,
00722, 00099, 01442
Sharper Image
Sherwood
Shinco
21117
Proscan
Proton
Radio Shack
RCA
00392, 00566
20770
01535
20717
00869
Shinsonic
Sonic Blue
Sony
20533
00392, 00566, 00855, 00143, 01392
20869, 21099
Samsung
Sanyo
01276, 01109, 01108
01219
20533, 20864, 21033, 21904, 21903
SVA
20717
20675
SKY
00856
Sylvania
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Sony
00639, 01640
00869
Fujitsu
20045
Star Choice
Tivo
Gateway
GE
21972
01142, 01442
00749, 01749, 00790, 01285
01640, 01392
00724, 00722
01535
20060, 20035, 20240
Toshiba
Ultimate TV
Uniden
US Digital
USDTV
Voom
General
20045
Go Video
GoldStar
Haojie
20432
20037, 20209, 20038, 20225
20240
01535
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
20081, 20038
20072
00869
Zenith
00856, 01856
21972
20047
Hitachi
20037, 20042, 20055
21972
Códigos para VCR
Howard
Computers
ABS
21972
HP
21972
Admiral
20048, 20209
Hughes Network 20042, 20739
Systems
Aiko
20278
Aiwa
20037, 20479
iBUYPOWER
JVC
21972
Alienware
America Action
American High
Amoisonic
Anam
21972
20045, 20067
20037, 20278
20067, 20038
20072
20278
KEC
20035
Kenwood
KLH
20479
20162, 20037, 20240, 20278
Kodak
Kolin
20035, 20037
Anam National
Asha
20162
20043, 20037, 20045, 20042, 20209,
20038
20240
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
20037, 20278
Logik
20072
20240
LXI
20037
20104
Magnavox
Magnin
Marantz
Marta
20035, 20039, 20081
20240
20184, 20121, 20209, 20002, 20479
20037
20035, 20081
20037
Canon
20035
Carver
20081
Matsushita
20035, 20162
CCE
20072, 20278
20048, 20081
20037, 20278
20072
Media Center PC 21972
Changhong
Citizen
MEI
20035
Memorex
20035, 20162, 20037, 20048, 20039,
20047, 20240, 20104, 20209, 20479
Colt
MGA
20240, 20043
Craig
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
MGN Technology 20240
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
Microsoft
Mind
21972
21972
21972
Minolta
Mitsubishi
Motorola
MTC
20042
20045, 20104, 20278
21972
20067, 20043
20035, 20048
20240
Denon
20042
DirecTV
Durabrand
Electrohome
Electrophonic
Emerex
20739
Multitech
NEC
20072
20039, 20038
20037
20035, 20037, 20048, 20104, 20067,
20038
20037
Newave
Nikko
20037
20037
20240
21972
20035
20032
Emerson
20035, 20037, 20184, 20240, 20045,
20121, 20043, 20209, 20002, 20278,
20479
Noblex
Northgate
Olympus
Optimus
Fisher
Fuji
20047, 20104
20035, 20033
21062, 20162, 20037, 20048, 20104,
20432
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
Orion
20184, 20209, 20002, 20479
Victor
20067
20045
20037
20240
21972
Panasonic
Penney
Pentax
Philco
21062, 20035, 20162, 20616, 20225
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
20035, 20037, 20240, 20042, 20038
20042
20035, 20479
Philips
Pilot
20035, 20081, 20739, 20618
20060, 20035, 20048, 20047, 20081,
20240, 20042, 20072
20037
White
Westinghouse
20209, 20072
Pioneer
Polk Audio
Profitronic
Proscan
Protec
20042, 20067
20081
XR-1000
Yamaha
Zenith
20035, 20072
20240
20038
20060
20039, 20033, 20209, 20479
21972
20072
ZT Group
Pulsar
20039
Qisheng
Quasar
Radix
20060
Avisos legales
20035, 20162
Derechos de reproducción
20037
© 2006 Insignia. Insignia y el logotipo de Insignia son
marcas de comercio de Best Buy Enterprise Services,
Inc. Otras marcas y nombres de productos son marcas
comerciales o marcas registradas de sus dueños
respectivos. Las especificaciones y características
están sujetas a cambio sin aviso previo u obligación.
Randex
RCA
20037
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
Realistic
ReplayTV
Runco
20039
Sampo
Samsung
Sanky
20037, 20048
20240, 20045, 20432
20048, 20039
Sansui
Sanyo
20067, 20209, 20479
20047, 20240, 20104
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
Scott
Sears
Sharp
Shintom
Shogun
Singer
20072
20240
20072
Sonic Blue
Sony
20616
20035, 20032, 20033, 20636, 21972
20042
STS
Sylvania
Systemax
Tagar Systems
Tashiko
Tatung
Technics
Teco
20035, 20081, 20043
21972
21972
20037
20045, 20067
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
Teknika
Tivo
20636, 20618, 21503, 20739
20240
TMK
Toshiba
20045, 20042, 20067, 20043, 21503,
21008, 21972
Totevision
Touch
20037, 20240
21972
Unitech
20240
Vector
20045
Vector Research
20038
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
LA REPARACIÓN O REEMPLAZO SEGÚN LO PROVISTO
BAJO ESTA GARANTÍA ES SU ÚNICO RECURSO.
INSIGNIA NO SERÁ RESPONSABLE POR DAÑOS
INCIDENTALES O CONSECUENTES DEBIDO AL
INCUMPLIMIENTO DE CUALQUIER GARANTÍA EXPRESA
O IMPLÍCITA RELACIONADA CON ESTE PRODUCTO,
INCLUYENDO, PERO SIN LIMITARSE A ELLO, PÉRDIDA
DE DATOS, IMPOSIBILIDAD DE USO DE SU PRODUCTO,
PÉRDIDA DE NEGOCIO O LUCRO CESANTE. INSIGNIA
NO CONCEDE NINGUNA OTRA GARANTÍA EXPRESA
CON RESPECTO AL PRODUCTO; TODAS LAS
GARANTÍAS EXPRESAS E IMPLÍCITAS DE ESTE
PRODUCTO, INCLUYENDO PERO SIN LIMITARSE A,
CUALQUIER GARANTÍA IMPLÍCITA DE O CONDICIONES
DE COMERCIALIZACIÓN O IDONEIDAD PARA UN USO
PARTICULAR, ESTÁN LIMITADAS EN DURACIÓN AL
PERÍODO DE GARANTÍA DECLARADO
ANTERIORMENTE Y NINGUNA GARANTÍA YA SEA
EXPRESA O IMPLÍCITA SE APLICARÁ DESPUÉS DEL
PERÍODO DE GARANTÍA. ALGUNOS ESTADOS,
PROVINCIAS Y JURISDICCIONES NO PERMITEN
RESTRICCIONES EN CUANTO A LA DURACIÓN DE UNA
GARANTÍA IMPLÍCITA, ASÍ QUE LA RESTRICCIÓN
ANTERIOR PUEDE NO APLICARSE EN SU CASO. ESTA
GARANTÍA LE DA DERECHOS LEGALES ESPECÍFICOS,
Y USTED PUEDE POSEER OTROS DERECHOS QUE
VARÍAN DE ESTADO A ESTADO, O PROVINCIA A
PROVINCIA.
Garantía
Garantía Limitada de 1 Año
Insignia Products (“Insignia”) le garantiza a usted, el
comprador original de este nuevo Televisor con Pantalla LCD
de 37" (“Producto”), que éste se encontrará libre de
defectos de material o de mano de obra en su fabricación
original por un periodo de un (1) año a partir de la fecha de
compra del Producto (“Período de Garantía”). Este producto
debe ser comprado en un distribuidor autorizado de
productos de la marca Insignia y empacado con esta
declaración de garantía. Esta garantía no cubre Productos
reacondicionados. Si notifica a Insignia durante el Período
de Garantía sobre un defecto cubierto por esta garantía que
requiere reparación, los términos de esta garantía se
aplican.
¿Cuánto dura la garantía?
El Período de Garantía dura por 1 año (365 días) a partir de
la fecha en que compró el Producto. La fecha de compra se
encuentra impresa en el recibo que recibió con el Producto.
¿Qué es lo que cubre esta garantía?
Durante el Período de Garantía, si un centro de reparación
autorizado de Insignia concluye que la fabricación original
del material o la mano de obra del Producto se encuentran
defectuosos, Insignia (cómo su opción exclusiva): (1)
reparará el Producto con repuestos nuevos o
reacondicionados; o (2) reemplazará el Producto sin cargo
con uno nuevo o con uno reacondicionado con repuestos
equivalentes. Los Productos y repuestos reemplazados bajo
esta garantía se volverán propiedad de Insignia y no se le
regresarán a usted. Si se requiere la reparación de
Productos o partes después de que se vence el Período de
Garantía, usted deberá pagar todos los costos de mano de
obra y de repuestos. Esta garantía estará vigente con tal que
usted sea el dueño de su Producto Insignia durante el
periodo de garantía. El alcance de la garantía se termina si
usted vende o transfiere el Producto.
¿Cómo se obtiene la reparación de garantía?
Si ha comprado el Producto en una tienda de ventas, lleve
su recibo original y el Producto a la tienda en donde lo
compró. Asegúrese de que vuelva a colocar el Producto en
su empaque original o en un empaque que provea la misma
protección que el original. Si compró el Producto en un sitio
Web, envíe por correo su recibo original y el Producto a la
dirección postal listada en el sitio Web. Asegúrese de
colocar el Producto en su empaque original o en un
empaque que provea la misma protección que el original.
¿En dónde es válida la garantía?
Esta garantía sólo es válida al comprador original del
Producto en los Estados Unidos y en Canadá.
¿Qué es lo que no cubre la garantía?
Esta garantía no cubre:
•
•
•
•
•
•
•
•
•
•
•
Formación del cliente
Instalación
Ajuste de configuración
Daños cosméticos
Daños debido a actos de la naturaleza, tal cómo rayos
Accidentes
Mal uso
Abuso
Negligencia
Uso comercial
Modificación de alguna parte del Producto, incluyendo
la antena
Esta garantía tampoco cubre:
•
•
•
Daño debido al uso o mantenimiento incorrecto
La conexión a una fuente de voltaje incorrecta
El intento de reparación por alguien que no sea una
compañía autorizada por Insignia para reparar el
Producto
•
Productos vendidos tal cual (en el estado en que se
encuentran) o con todas sus fallas
•
•
Productos consumibles, tal cómo fusibles o baterías
Productos en los cuales el número de serie asignado
en la fábrica ha sido alterado o removido.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Televisor Insignia NS-37LCD con Pantalla LCD de 37"
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Indesit Washer WIB101 User Manual
Intel Computer Hardware 80C186EB User Manual
Inter Tel PDAs Smartphones 8601 User Manual
Jensen MP3 Player Accessories KT4480BK User Manual
JVC Speaker System KD AR860 User Manual
Kaz Humidifier V150SGN User Manual
Kenwood Car Stereo System KDC 215S User Manual
Kenwood Stereo Amplifier KAC 210MR User Manual
Kenwood Two Way Radio MPT1327 User Manual
Kettler Home Gym Axiom P2 User Manual