OPERATOR’S MANUAL
650925--X--B
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
INCLUDE MANUALS: 6695X--X LOWER PUMP END (PN 97999--002), 67147 HYDRAULIC MOTOR (PN 97999--705) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
RELEASED: 8--1--97
REVISED:
(REV. B)
6--4--10
650925--X--B
2.062 SQ.” HYDRAULIC MOTOR
0.3:1 RATIO
6” STROKE
FOUR BALL PUMP SERIES
400 SERIES STAINLESS STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
PUMP DATA
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637315 for repair of Hydraulic Motor section.
• 637230- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
MODEL 650925-X43-B
Hydraulic Inlet
3/8--18 NPTF--1(f)
(Not Shown)
SPECIFICATIONS
Hydraulic Outlet
1/2--14 NPTF--2(f)
Model Series (Refer to option chart) . . 650925--X43--B
Type . . . . . . . . . . . . . . . . . . . . Hydraulically Operated, Four Ball
Ratio . . . . . . . . . . . . . . . . . . . . 0.3:1
Hydraulic Motor
67147
41-1/4”
(1048 mm)
(See Manual 67147)
Hydraulic Motor . . . . . . . . . . . . 67147
Motor Repair Kit . . . . . . . . . . 637315
Motor Size . . . . . . . . . . . . . . 2.062 sq.’’ (13.3 sq. cm)
Stroke . . . . . . . . . . . . . . . . . . 6’’
Spacer Section
SCREW 93342--1 (3)
WASHER Y14--625--C (3)
Hydraulic Inlet . . . . . . . . . . . 3/8’’ -- 18 NPTF--1(f)
Hydraulic Return . . . . . . . . . 1/2” -- 14 NPTF--1(f)
Lower Pump End Series . . . . . 66951--X43
Lower Pump Repair Kit . . . . . 637230--X43
Material Inlet . . . . . . . . . . . . . N/A
CONNECTOR (See Figure 2)
SPACER ROD 93580--1
26-7/8
(683 mm)
Material Outlet . . . . . . . . . . . 3/4’’ NPTF--1 (f)
SPACER ROD 93580--2 (2)
PERFORMANCE
Material Outlet
3/4’’ NPTF--1(f)
Hydraulic Inlet Pressure Range 50 -- 1200 psi (3.4 -- 83 bar)
Fluid Pressure Range . . . . . . . 15 -- 360 psi (1 -- 25 bar)
Required H-power @ 50 cpm . 3.2 @ 1200 (83 bar)
Hydraulic flow req’d @ 50 cpm 8.7 gpm (32.9 lpm)
Max. Rec’d Cycles / Minute . . . 50
191_ FROM HYDRAULIC INLET
14-21/32
(372 mm)
Lower Pump
66951--X43
(See Manual 6695X--X)
Displacement In3 Per Cycle . . . 82.172
Volume / Cycle . . . . . . . . . . . . . 45.5 oz. (1346 ml)
Cycles Per Gallon . . . . . . . . . . 2.8
Flow @ 50 Cycles / Minute . . . . 17.8 gpm (67 lpm)
Noise Level . . . . . . . . . . . . . . . N/A
FIGURE 1
Maximum Temperature Limit . . 130_ F (54_ C)
Accessory Available: 93351--1 Wall Bracket and 66547 Floor Mounting Flange.
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650925--X--B MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6695X--X LOWER PUMP END OPERATOR’S MANUAL
- 67147 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
Download from Www.Somanuals.com. All Manuals Search And Download.
|