Instruction Manual
MULTI-CODECCDPLAYER/FMTUNER
Model iMP-900
TM
Model iMP-900
Thank you for purchasing the product.
Please read the manual carefully before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Notices for Safety
Handling Notices for Safety
Power
Player
Do not overload a single power circuit.
Overheating or fire can result.
Do not use excessive force on the buttons or
attempt to disassemble the device.
Damage to your player may result from
improper use.
Keep out of direct sunlight and extreme heat
and cold.
Damage to your player may result from
improper use.
Do not kink or crease the power cable or
place heavy objects on the power cable.
Fire can result from damaged power cables.
Do not handle power plug and adapter with
wet hands.
Electrical Shock may result.
Use only the supplied AC adapter. Use of
non-authorized power adapters is not
recommended.
Damage to your player may result from
improper use.
Keep the player away from strong magnets or
excessive violation or dropping any material.
Damage to your player may result from
improper use.
Do not place objects inside the device other
than CD s.
Damage to your player may result from
improper use.
Unplug the AC adapter during
electrical storms.
Electrical Shock may result.
Firmly plug the adapter into the wall socket.
Fire can result from improper use.
Do not use water or chemicals to clean the
player.
Clean the surface with a soft cloth.
Damage to your player may result from
improper use.
Keep away from harsh environments
including humid, dusty, and smoky areas.
Damage to your player may result from
improper use.
Immediately power off the player and unplug
the AC adapter if smoke or odors emit from
the player or adapter.
Unplug adapter when it s not in use.
Overheating or fire can result from
improper use.
Do not place heavy objects on the device.
Damage to your player may result from
improper use.
Do not drop or subject the device to impact.
Damage to your player may result from
improper use.
Electrical Shock or fire can result from
improper use.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Notices for Safety
Handling Notices for Safety
Player
Others
Avoid contacting the player with water or
chemicals.
Damage to the internal parts of the player
may occur. If your player gets wet, dry the
outside with a soft cloth as soon as
possible.
Do not disassemble or modify.
Damage to your player may result from
improper use.
Do not use headphones / earphones while
cycling, driving, or operating any motorized
vehicle.
Reduce volume while walking,
especially at pedestrian
crosswalk.
It is dangerous and is illegal in
some areas.
It is dangerous and is illegal in some areas.
Do not use at high volume for continuous
listening.
Reduce volume or stop using the player if
you experience a ringing in your ears.
Battery (for using external battery)
Hearing experts advise against listening to
continuous, loud and extended play.
Hearing experts advise against listening to
continuous, loud and extended play.
Do not use different types of batteries
together.
Damage to your player may result from
improper use.
Do not use a new battery with a discharged
battery in the device. Always replace all
batteries at the same time.
Damage to your player may result from
improper use.
Keep headphones / earphones cords under
control at all times.
Cords may get caught on a variety of objects
and cause damage or injury.
Included earphones include soft covers for
your comfort. They may be used with or with
out covers at your preference.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
Contents
Contents
1
Welcome
2
3
Copyrights / Certification / Trademarks / Limited Liability
Handling Notices for Safety
1. Before using
Features of iMP-900
Components
9
10
2. Using the Controls
Locating the controls
Locating the controls(Remote Control)
Connecting player
11
13
15
3. Detailed Operation
Listening to Music
Operating the FM Tuner
19
21
4. Specific features
Navigation mode
EQ Mode
Playback Mode
Interval repeat/Reservation
Program Mode
-10/+10Function
BOOKMARK
Other Features (Playlist)
MENU
MENU Operation
MENU Setup
Using the Password
25
26
27
28
29
31
32
33
34
36
38
53
5. Additional Information
Firmware Upgrade
Questions and Answers
Troubleshooting
55
56
62
64
66
67
68
Precautions
Product specifications
Regulatory Information
Safety Warning
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Features of iMP-900
Components
Slim Design - Depth : 13.7 mm
Remote Control
iMP-900 Player
1
3
2
4
Multi-Codec CD Player
Supports MP3, WMA, OGG and ASF formats as well as Standard Audio CD.
Enhanced Battery Life
With MP3 or WMA files, the iMP-900 can play for up to 120 hours (Using the
internal batteries and external battery pack). (External Battery Pack : AA Size x 4)
(When using internal battery : 30hours)
Firmware Upgradeable
Provides the latest updated features via firmware upgrade.
User Manual/Warranty card
Quick Start Guide
Earphones/ Earphone covers
Graphic LCD supporting Multiple Languages- support 40 languages
iMP-900 comes with 4 line graphic LCD which can support multiple languages
(40 languages) including traditional and simplified Chinese.
Built-in Recharging with Over Charge Protection Circuit
Over Charge protection circuit prevents over powering the batteries.
Discharging function helps to maximize battery life.
iRiver Shock Free Anti-Shock System+ESP function
Using exclusive iRiver anti-skip technology, the iMP-900 provides maximum skip
protection by buffering your music before playback.
5 AC Adapter (4.5V)
Carrying Case
6
8
Built in 6 Preset EQ
Normal, Rock, Jazz, Classic, U Bass, Metal
Xtreme EQ and Xtreme 3D
Customize your own EQ with Xtreme EQ and enhance bass and surround sound
with Xtreme 3D.
External Battery Pack
Rechargeable Batteries
7
FM Tuner
(Stick Type x 2)
Auto scanning and frequency memory function make it easy for you to listen to
the FM Radio.
Recognize Discs in Packet Write or Multi session Format
WinAmp Playlist support.
iMP-900 supports Winamp M3U Playlists. (maximum 20 lists)
GUI (Graphic User Interface) Menu System
Accessories subject to change without notice and may vary from image shown.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating the controls
Locating the controls
Player-Front View
Player-Inside View
LINE OUT
BATTERY
COMPARTMENT
REMOTE CONTROL/
EARPHONE
OPEN Button
Player-Rear View
DC IN 4.5V : Connect the Adapter to
charge rechargeable batteries or
using external power. Insert them by
matching the + and - polarity.
EXTENSION BATTERY PORT
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating the controls
LCD screen display
Remote Control
Music Mode
Track Number Play Time
Playback Mode
Hold
Remote control is locked.
Battery Indicator
Folder Name
File Name
ID3 Tag Information
Hold Switch
PLAY / PAUSE / MUTE
-10/+10 Button
VOLUME / EQ / Level Meter
BIT RATE
SAMPLE RATE
File Format
POWER ON,
NAVI / MENU,
PRESET Button
Program/ Playlist
ASF
MP3
WMA
IRM
iRiver Shock Free
AUDIO CD
Volume + Button
NEXT Button
IRM (iRiver Rights Management)
iRiver Rights Management is a digital music format.
Please visit our web site for details about this music format.
Volume - Button
PREVIOUS Button
FM Mode
Stereo/Mono
MUTE
PRESET ON / OFF
POWER OFF / STOP
A-B / MEMORY
MODE / STEREO / CD-FM Button
Channel
FM Frequency
Range
Station Frequency
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting player
Connecting player
Charging with AC Adapter
Using the External Battery Pack
1 Open the battery cover on the external battery pack as below figure.
Use only the AC Power Adapter supplied with the player for safety.
1
2
Inserting batteries
Connect the AC adapter to the 5.0V DC jack on the player first and then into AC
outlet. (AC adapter of this player is for 100~240V, 50~60Hz.)
The player will charge automatically when the player turns on after connecting
the AC adapter to the player. (Refer to page 17~18 for details)
3
Connect the external battery pack
as shown in the right figure.
2
AA size battery x 4EA
CAUTION!
Do not use mixed with new batteries and used batteries.
Do not use different types of batteries together.
When the batteries are not to be used for a long time, remove them.
If battery leaks, remove them.
Using the rechargeable Batteries
If battery leaks, wipe off any residue in the battery compartment and
insert new batteries.
Open the battery cover on the inside of the player.
1
2
Do not recharge a normal battery.
Insert rechargeable batteries(Stick type x 2ea) matching + and - and close the
battery cover.
The internal and external batteries are used simultaneously,
the batteries can be charged according to batteries’ condition.
Connect Remote control / Earphones
1 Connect remote control cable to the player as shown on below diagram.
2 Connect earphone to the earphones jack of remote control.
When the battery level is low
It beeps every 10 minutes. ( Beep sound can be on/off. For details,
please refer to page 54)
iMP-900 may not function properly. Replacing battery or charging is
recommended
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting player
Connecting player
Discharge & Charge
Recharging Method
Insert rechargeable batteries into the battery compartment of the player
1 Install rechargeable batteries.
1
2 Connect the AC adapter to the player.
2 Connect the AC adapter to the player.
Press
button to power on the player and then it starts to charge.
Press
button to power on the player and set the “CHARGE FUNCTION
3
3
It may be necessary to set the CHARGE FUNCTION to CHARGE ON .(Refer
to page 41)
to DISCHARGE & CHARGE”to charge after discharging.(Refer to page 41)
is scrolled when discharging during playback.
4
5
is scrolled when charging during playback.
4
5
Press and hold the
mode (see below image)
button during playback to enter the standard discharging
Press and hold the
button during playback to enter the standard charging
mode (see below image)
When discharging
When Charging
After discharging is complete the player will switch to CHARGE mode and
CHARGE function in the menu is changed to CHARGE ON .
6
6 Once fully charged, charging is automatically stopped.
7 Once fully charged, charging is automatically stopped.
After charging is completed during playback mode, charging indicator
(
) is changed to adapter indicator(
).
After charging is completed at the playback mode, charging indicator(
) is
The player automatically powers off when done charging.
(except when charging during playback.)
Once fully charged, the player will not try and charge the batteries.
changed to adapter indicator(
).
The player automatically powers off when done charging.
(except during playback.)
Charging/Discharging time (Estimated with the rechargeable stick
batteries provided)
To make your batteries last longer.
- Set the SORT to “PHYSICAL ADDR”
- Set the TAG INFORMATION to “OFF”.
- Set the EQ mode to NORMAL, ROCK, JAZZ or CLASSIC.
- Set the BACK-LIGHTING time to the shortest possible.
- Set the SHUFFLE mode to OFF.
Charging : Approx. 4 hours (At full discharge)
Discharging : Approx. 5 hours (At full charge)
For long duration of battery life, we recommend selecting the
Discharge/Charge function once a month.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Music
Listening to Music
Basic Operation
Basic Operation
Slide the open button on the side of the player and insert the disc with
the disc label facing out. Close the lid.
Press the
button to play music for pause
1
5
6
and press it again to resume playback.
Push the NAVI/MENU switch toward + or - to
adjust the volume.
Connect Remote Control and Earphones.
2
Push the NAVI/MENU switch toward
to skip to previous or next track.
or
7
8
9
Push and hold the NAVI/MENU switch toward
or
to play fast-backward or fast-forward within
a track.
Slide the HOLD switch on the remote to the Off position.
3
Push and hold after pushing the NAVI/MENU switch
toward
folder.
or
to skip to the previous or next
Press the NAVI/MENU button to play.
After powering on, the disc will play automatically.
4
NOTE
Refer to page 27 for details about searching the music.
To play while in stop mode
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the FM Tuner
Operating the FM Tuner
Listen to FM radio (Frequency Range 87.5MHz ~ 108 MHz)
Auto Scan function
To Auto Scan for a station, release the PRESET mode by pressing the
NAVI/MENU button. Push and hold the NAVI/MENU switch toward
Press the NAVI / MENU button to power on the player. To switch to the FM
1
or
.
Tuner, push and hold
switch toward MODE/STEREO/CD-FM.
Find the station by scrolling
or
.
or
to select your desired station.
2 Push the NAVI/MENU switch toward
<PRESET RELEASING>
Finding a Station using PRESET Mode
To select a station saved in memory, press the NAVI/MENU button to enter
PRESET mode then find a saved station by pushing the NAVI/MENU switch
switch toward MODE/STEREO/CD-FM to select Stereo or Mono.
3 Push
toward
or
.
<PRESET SETTING>
4 Push the NAVI/MENU switch toward + or - to adjust the volume.
Example)
STEREO
STEREO
STEREO
FM tuner reception will be affected in weak reception areas.
When player does not have any preset channels, EMPTY will be displayed at
preset mode then fade out.
button to Mute the radio. and press it again to release.
5 Press the
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the FM Tuner
Operating the FM Tuner
Memory function (Store favorite stations)
Memory delete function (Delete saved channels)
Push the Navi button to release PRESET mode, select the station by pushing
Select channel to be deleted by pushing the NAVI/MENU switch toward
at preset mode.
or
1
1
the NAVI/MENU switch toward
or
.
Push the switch toward A-B/MEMORY to select a channel number to
assign to the frequency. Push it toward A-B/MEMORY to save the station
again.
2
Push and hold the
switch toward A-B/MEMORY to delete the selected
2 station.
Press
or
I
and select the
desired channel
again
Save complete
Select CH02
Pressing the
button
will exit the memory
function without saving.
The next channel will appear when channel delete is completed.
3
Up to 20 channels can be memorized.
Push and hold the
next channel also.
switch toward A-B/MEMORY. if you want to delete the
3
Auto memory function : (To save the Channels automatically)
Push the NAVI button to release PRESET, push the
switch toward A-
B/MEMORY. CH01 to CH20 will be saved automatically with the first 20 stations
the player finds.
<PRESET RELEASING>
NOTE
It may not be saved in weak reception areas.
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation mode
EQ Mode
Navigation Mode
EQ Mode
Press the NAVI/MENU button to
1
display the list of audio tracks.
The current track will also be displayed.
Push the NAVI/MENU button toward
play.
You can easily select a track using the
are many tracks on the CD.
or
to select a track or folder to
2
Push and hold the
switch toward A-B/MEMORY to display the current EQ.
switch toward -10/+10 in case there
Every time you push this button, the EQ mode scrolls in sequential order.
Xtreme EQ and 3D are set in the MENU, refer to page 51 through 52 for
details.
NOTE
NOTE
Press the NAVI/MENU,
move to the upper folder and toward
button or the NAVI/MENU switch toward
to
3
to move the lower folder.
With EQ SELECT MENU, user can set only desired EQ function.
Refer to page 54 for setting the EQ SELECT.
4 Press the NAVI/MENU,
button or the NAVI/MENU switch toward
or
to play the selected file.
or
or
File format
ASF
MP3
WMA
CD
IRM
IRM (iRiver Rights Management)
iRiver Rights Management is a digital music format.
Please visit our web site for details about this music format.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Interval Repeat / Reservation
Playback Mode
Setting the Playback Mode
Interval Repeat (A-B)
Play a selected interval repeatedly during play.
You can set various Repeat and Shuffle options by choosing these selections under
Mode. Change the Repeat or Shuffle mode by pushing the
switch toward
MODE/STEREO/CD-FM. Please refer to the MENU-MODE function controls (page 48)
for user-defined configuration.
Whenever the
switch is pushed
Push the button toward A-B/MEMORY
once to select the beginning <A> point.
toward MODE/STEREO/CD-FM, the
icon in the playback mode indicator
is changed.
REPEAT
Press the button toward A-B/MEMORY
again to select the ending <B> point.
Play a selected track repeatedly.
A-B interval will be repeated.
Play all tracks in the selected folder and stop.
Play all tracks in the selected folder repeatedly.
Play all tracks stored in the CD repeatedly.
Reservation
Press the NAVI/MENU button during playback to select the next song to be
played, then push the
switch toward A-B/MEMORY to queue that song.
SHUFFLE
Ex)
Randomly play all tracks in the player and stop.
Press NAVI/MENU
button during playback,
Play a single track repeatedly. Press
random track.
or
to select a new
Randomly play all tracks in the selected folder and stop.
Randomly play all tracks in the selected folder repeatedly.
Randomly play all tracks in the CD repeatedly.
After selecting the song to play next by using Volume
INTRO
+ or Volume - button, then push the
A-B/MEMORY.
switch toward
INTRO: Plays the beginning 10 seconds of each track in sequential order.
INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track in
sequential order. You can set this function in the MENU function.
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Playback
Program Playback
Activating Program mode
NOTE
Program Mode allows you to program a list of songs to play.
To add all the songs in a certain folder, use the NAVI/MENU button and select the
folder using
or
button and then push the
switch toward A-B/MEMORY.
(Subfolders can not be added.)
To remove a programmed song
Push the
switch toward MODE/STEREO/CD-FM. The program list will be
updated automatically.
While in Stop Mode, push the
Program Mode.
switch toward A-B/MEMORY to enter
Program Playback
1
2
After programming, press
to play the tracks in sequential order.
The program mode icon appears
Change to Program mode
Program mode is activated while in Stop Mode.
Repeat A-B is activated while in Play Mode.
NOTE
Press the NAVI/MENU button again to display the file list.
After selecting the desired track using the Volume +, Volume - or -10, +10 button,
Cancel Program Mode
push the
switch toward A-B/MEMORY.
While Playing
Press the
button twice to cancel the program.
While in Stop Mode
Press the button twice to cancel the program.
The order of
programmed track
The order of track
in the CD
29
30
Download from Www.Somanuals.com. All Manuals Search And Download.
BOOKMARK feature
-10/+10 function
-10/+10 function
BOOKMARK
During playback, press the
(forward) 10 tracks.
switch toward -10 (+10) to go backward
This function allows you to BOOKMARK parts of a track for easier searching of long
audio segments.
Bookmark function is activated under the Study mode.
(Refer to page 49 for Study mode.)
Long pushing of the
switch toward -10 will add / delete / move the bookmark.
Bookmarks can be reserved up to 20 per disc.
A beep will represent the number of the indicated bookmark.
(One beep for 1, two beeps for 2, etc.).
- Bookmark Add : After long pushing the
switch toward A-B/MEMORY and push
the switch toward A-B/MEMORY to add the present location into the bookmark.
- Bookmark Delete : After long pushing the
switch toward MODE/STEREO/CD-FM to delete the present location from the
bookmark.
switch toward -10 and push the
iRiver Shock Free
Push and hold the
or release the iRiver Shock Free Mode.
switch toward +10 to activate
Whenever you push the
switch toward MODE/STEREO/CD-FM, the bookmark
will be deleted in backward sequence.
- Moving to next bookmark : After long pushing the
switch toward -10 and push
switch toward -10 and
NOTE
the NAVI/MENU switch toward
to move to the next bookmark.
iRiver Shock Free
This is the function to prevent skipping when
playing a Standard Audio CD. In case the CD is
dirty or defective, iRiver Shock Free may skip more
than normal operation. In this case, use the player
after cancelling the iRiver Shock Free.
Moving to previous bookmark : After long pushing the
push the NAVI/MENU switch toward
to move to the previous bookmark.
Pressing the Mode button
for a few seconds while
playing will set the
Enhanced Anti-shock on
and off.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Other features (Playlist)
Other features (Playlist)
How to use WINAMP PLAYLIST
How to use WINAMP PLAYLIST
The player can play a Playlist ( .M3U) file on the disk.
*
Press the NAVI/MENU or
button to play the tracks in the order of the playlist.
5
6
Make a PLAYLIST ( .M3U) using WINAMP.
*
1
Note : WINAMP software is not included with the player.
Winamp execution picture
1. Launch WINAMP and add songs to make
a list.
PL icon indicates PLAY LIST.
2. Click "LIST OPTS" located on the right
bottom and click "SAVE LIST"
A total of 20 playlists can be recognized.
Click the SAVE LIST button.
3. Name the file name (ex: iriver.m3u)
and click "SAVE" to save the list.
2 Burn the disc with WinAmp play list and related files.
Load the disc into iMP-900.
3
Push the
switch toward A-B/MEMORY at stop
4
mode and LCD displays a list of M3U playlist files on
the disk. You can find the playlist you want to play by
using the Volume + or Volume - button.
33
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
Menu
To select Main Menu
Configuration
Shift between Main Menus
Function Control is subject to change with different firmware
versions. You can configure your own settings.
Press the
menu, press the
next menu.
button to move to previous
button to move to
GENERAL
DISPLAY
back light
TIMER
sleep
pwr off
resume
language
cd esp
lcd contrast
visualization
tag information
time
sort
charge function
multi session
password
load default
From Main Menu to Sub Menu
or
battery indicator
MODE
User EQ
CONTROL
FF/RW scan
FF/RW skip
FF/RW scan speed
scroll speed
+/-10 button
auto pause
repeat
shuffle
intro
study
name
Xtreme EQ
Xtreme 3D
DBE setting
3D EQ setting
adapter volume
sound volume
EQ limit
Push the NAVI/MENU switch toward
scroll between Sub Menu.
or
(or Volume +, Volume -) to
To select Sub Menu
EQ setting
EQ select
beep volume
fade in
From Sub Menu to Sub Menu settings
or
Menu Operation
Press and hold the NAVI button to display the menus.
It is composed of 6 main menus with sub-menus.
Push the NAVI/MENU switch toward
scroll between Sub Menu settings.
or
(or Volume +, Volume -) to
MAIN MENU
SUB MENU
SUB MENU Setting
When you select a sub menu, you can set your preference to be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
36
Menu operation
MENU-General
GENERAL
Exit Main Menu
To exit Main Menu
Press the STOP( ) button at the initial setting menu to exit Function Control
Mode.
Resume
Exit Sub Menu
You can select how to resume the last track played.
“Track #”plays the beginning of the last track played,
while “Track Time”resumes to the exact position in
the song.
To exit Sub Menu
Press the STOP( ) button to exit the sub menu and to display the initial setting
menu.
Language
Song title and ID3 tag information for the CD is
dependent on the version of the PC operating
system that was used to create it.
(supports 40 languages)
Exit Sub Menu Settings
(For example, if a CD is created in a Korean version
of Windows, the language setting should be Korean
for proper title display)
To save and exit Sub Menu Settings
CD ESP
This is the function to prevent skipping when playing
a Standard Audio CD.
For best sound quality, it is recommended to use the
40 SEC option, for maximum skip protection, 160 SEC
option is suggested.
If 160 SEC is selected, the sound quality of the music
will be degraded due to higher compression of the music in comparison with
40 SEC.
MP3 CD (128Kbps, 44KHz) is always operated 480sec option.
37
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-General
MENU-General
SORT
PASSWORD
OFF : Password function is not activated.
ON : Password function is activated.
CHANGE : To change the Password
- Refer to page 55~56.
SORT
You should set sort while the player is stopped.
If directory structure is like as right picture, the
setting order is like as follows.
BREADTH FIRST :
DEPTH FIRST :
PHYSICAL ADDR. : It is sorted as the sequence of
recording order independent of directory structure.
ex)
LOAD DEFAULT VALUE
* You should set sort at stop mode.
Initialize to original factory setting.
Select “YES”, then push the NAVI/MENU or
button to initialize.
CHARGE FUNCTION
Select Charging or discharging for rechargeable
batteries.
OFF : The player will not charge.
CHARGE ON : Select to enable the player
to charge the internal batteries.
DISCHARGE & CHARGE : Charge after full discharging the internal batteries.
When discharging is completed, this setting will change to CHARGE ON.
(Refer to page 17~18)
MULTI SESSION
OFF : the player will not read Multi Session
written disks.
ON : the player will read Multi Session disks.
If you are not using audio CD's created in Multi
Session format, set this feature to OFF to shorten
the access time of your CDs.
39
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-Display
MENU-Display
Display
TAG INFORMATION
ON : Displays track with ID3 tag information or
with lyrics if there are lyrics.
OFF : Displays track with file name.
You can select OFF/ON using
information display preference using
button.
button and tag
or
CAPTION OFF : You can turn off lyric display of synchronized MP3.
BACK-LIGHT
Select the back-lighting time.
Adjust the lighting time (1~20Sec) by using
(or Volume +, Volume -) button.
0 : Backlight is off.
and
PLAY TIME INFO
Normal : display elapsed time of the current track.
Remain : display remaining time of the current track.
21 : Backlight is always on.
ADAPTER ALWAYS ON : Select it by using
backlight is always on.
button.If the adapter is connected,
Note : In case of VBR MP3 file,
the remaining time may not display accurately.
LCD CONTRAST
BATTERY INDICATOR
Adjust LCD contrast of remote control.
Adjust the level of the battery indicator to
compensate for different style of batteries.
Lower numbers will make the battery indicator
higher, higher numbers will make the battery
indicator lower.
Contrast can be adjusted by using the
(or Volume +, Volume -) buttons.
and
VISUALIZATION
Visualizes audio signal at play mode.
LEVEL METER 1
LEVEL METER 2
WAVEFORM
PROGRESSIVE
41
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu-Timer)
MENU-Control
Timer
Control
FF/ RW SCAN
SLEEP POWER OFF
ON : Long click of
within the track.
Short click of
previous track.
OFF : Fast Scan through songs in a folder.
or
or
button for fast scan
button for next or
Automatically powers off after fixed time
(Time range can be set from 0 to 99 minutes).
Use
or
button (or Volume +, Volume -) to
adjust time.
By using the NAVI/MENU or
beep sound to ON or OFF.
button, you can select
NOTE
As typical with MP3 files, particularly VBR (Variable Bit Rate) files, fast scan may
not be as smooth as conventional audio CD.
NOTE
This function works in both CD and FM modes.
When the power is off, the sleep power off setting goes back to Zero setting.
FF/ RW SKIP
FAST SKIP allows skipping 10 songs or 1 folder
forward or backward by pressing and holding the or
buttons.
OFF : Disables the fast skip feature.
10 : Fast skip ahead 10 tracks or back
10 tracks.
STOP POWER OFF
Automatically turns power off at stop mode.
(Time range can be set from 1 to 60 minutes by one
minute increments.)
Directory : Jump to the Previous/Next folder.
Use
or
button (or Volume +, Volume -) to
adjust time.
FF/ RW SCAN SPEED
NOTE
The fast scan speed can range from 1x / 2x / 4x / 6x.
This function only works in CD function.
and
button can be used for this setting.
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-Control
MENU-Mode
SCROLL SPEED
PLAYBACK MODE
Adjust scroll speed of character displayed
on the LCD (Title or Singer name) by 1x/2x/4x.
Vertical : The scroll goes from up to down
Horizontal : The scroll goes from the left to the right.
REPEAT MODE/ SHUFFLE MODE
-10/ +10 Button
Allows you to select the modes available when pressing the MODE button during
playback.(Multi selection capable)
-/+10 : During playback, go back to the previous
10th track, and push it to +10 to go forward to the
next 10th track.
Directory : -/+10 button works as folder skip.
AUTO PAUSE
Only the selected play mode will be applied when you press the MODE button
(For details, please refer to page 29)
When Auto Pause is on, the player will
automatically pause after a disc loads and after
every song is played. you will need to press Play
button to resume the playback again.
INTRO MODE
Intro : Plays the beginning 10 seconds of each
track.
Intro Highlight : Plays 10 seconds at the 1 minute
mark of each track in sequential order.
45
46
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-Mode
MENU-Mode
NAME
STUDY MODE
STUDY MODE
You can input your name or custom text. (maximum 12 characters in English)
Button Operation
When click the -/+10 button, it is operated
as the set status.
OFF : Skip ahead 10 tracks.
Select the character by using
and
5 SEC : Pushing of the
will skip the current track 5 seconds ahead or backward.
switch toward -10 (+10)
button and press NAVI/MENU
button to input the character.
10 SEC : Pushing of the
switch toward -10 (+10)
will skip the current track 10 seconds ahead or backward.
BEEP : A beep sound will be played when the buttons are operated.
To move the cursor in the name window,
use + and - on Volume button.
If it is set to 5 Sec, 10 Sec, BEEP, it is operated as STUDY Mode.
To scroll between English
and your preferred
BEEP VOLUME MODE
This mode is for blind persons. A beep sound
will be played when the buttons are operated.
It is operated as 5 SEC MODE.
language, use
button
To delete the character, push
switch toward
MODE/STEREO/CD-FM.
To save the text and exit, use PLAY button.
Chinese and Chinese characters are not supported in the Name
feature.
NOTE
The saved text is displayed during initial loading of disc and at stop mode
during play.
Initial loading
Stop during playback
47
48
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-Sound
MENU-Sound
SOUND
Xtreme 3D
You can adjust the level of 3D sound(minimum,
Natural, and Maximum). You can extend 3D sound
by selecting Bass Boost or 3D EQ.
You can also adjust the level of 3D sound
with the
or
(or VOL +, VOL -) lever.
Select DBE or 3D EQ with the NAVI/MENU button.
Xtreme EQ
DBE Setting
You can select the Bass Center Band level from
Band 1 to 4. You can also set the Bass Boost gain
from 0 dB to 15dB by 3dB step.
You can adjust the sound to your preference.
There are 5 band frequency steps, set from
-15dB to +15dB by 3dB step.
Select band 3 or 12dB with Volume + or
Volume - button (If selected character is highlighted.)
and adjust the level with the
or
(or VOL +, VOL -) button.
How to set Xtreme EQ
1. Select the Frequency
step to set using the
2. Adjust the level using
the VOL + or VOL -
switch.
3. To exit Xtreme EQ
setting, press
or
3D EQ Setting
,
switch.
NAVI/MENU button.
You can adjust the sound to your preference.
There are 5 band frequency steps, set from -15dB
to +15dB by 3dB step.
NOTE
Operation method is as same as it of Xtreme EQ.
ADAPTER VOLUME
35 ON : Volume will set to 35 when the AC
adapter is attached.
OFF : This function is not activated.
This feature is useful when connecting the
player to your car or home stereo system.
49
50
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-Sound
MENU-Sound
EQ SELECT
SOUND BALANCE
When Sound Balance bar is moved to L (Left,
0),the sound outputs at the left earphone. When
the lever is moved to R (Right, 40) the sound
outputs at the right earphone. The default value is
20 and the sound outputs the same level at both
earphones.
You can select various EQ modes.
Press NAVI/MENU button after selecting EQ by
using
or
(or VOL +, VOL -) switch.
You can not select NORMAL EQ.
NOTE
The adjusted EQ is automatically selected when you adjust the EQ
setting even though you do not select Xtrm EQ or Xtrm 3D.
EQ LIMIT
ON : Limit the control of equalizer frequency to
prevent distortion of sound.
OFF : You can enjoy original sound though
distortion may occur.
BEEP SOUND VOLUME
Set beep volume ON/OFF or level.
Set to "0"for OFF.
TAG AUTO EQ
Automatically changes EQ by reading the genre of
TAG Information.
SOUND FADE IN
ON : Can automatically change EQ by
reading the genre of ID3 TAG
information.
When activated, volume increases
gradually at playback mode to prevent sudden
loudness.
OFF : EQ is set by the user.
EQ is selected by genre as follows :
Rock : Classic Rock, Rock, Altern Rock, Instrumental Rock, Southern Rock,
Rock & Roll, Hard Rock, Folk Rock, Gothic Rock, Progressive Rock,
Psychedelic Rock, Symphonic Rock, Slow Rock, Punk Rock
Jazz : Jazz, Jazz+Funk, Acid Jazz
Classic : Classical, Opera, Chamber Music, Sonata, Symphony
Metal : Metal,Heavy Metal, Death Metal
Ubass : Bass, Booty Bass
NOTE
Tag information saved as Dance and Pop is operated as Normal EQ.
51
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Password
Setting the Password
Using the Password
Changing the Password
Select the menu you want on the “MENU
(Refer to page 40)
GENERAL
Password”.
Select “CHANGE”on the “MENU
GENERAL Password”.
Input the old password. (The
initial password is “0000”)
1
1
3
2
4
If you select “ON”on the MENU
2
GENERAL
Password, the right screen
Input the new password of 4 digits
to confirm once more.
Input the new password of 4 digits.
is displayed after loading screen when
you turn the player on.
Press
,
(or Volume +, Volume -) to move the numeral and press the
3
or NAVI/MENU button to select it. The screen as below is displayed.
or
or
NOTE
If the password to change and the password to confirm are the same, the
password is automatically changed to the new one and the playback screen is
displayed on the LCD.
If you select “ON”on the password menu, you must input the new password to
turn on the player.
When the input password is correct, the above screen disappears and changes
to Total screen. Press the PLAY button to start the playback.
If the password to confirm is different from the changed password, the password
screen goes back to the Confirm screen.
If the password is wrong, the screen goes back to the input screen.
Press the STOP button to exit changing the password, and the old password is
preserved.
CAUTION!
The Password is initialized as “0000”when the firmware is upgraded.
- The Password must input as 4 digits.
- The Password is initialized as “0000”when the firmware is upgraded.
53
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware Upgrade
Upgrading Firmware
Questions and Answers
Player
Q How long does Anti-Shock last?
With MP3 files (128Kbps, 44.1Khz), Anti-Shock lasts up to 480 seconds.
With Audio CD, you can set it up to 40 or 160 seconds.
A
What is FIRMWARE?
Q Mechanical noise is heard from the player.
It is the operating system that works in the iMP-900.
iRiver provides you with the latest and best features through Firmware
When loading a CD or searching music, CD Pick-up makes noise moving at high
A
speed. This is not a malfunction. But if you hear mechanism noise through
earphones or hear excessive noise from the player, contact iRiver Customer
Service.
How to UPGRADE?
Q Does using CD's created on a computer reduce the life of the Lens?
2. Execute the file after extraction.
3. Burn the iMP-900 HEX file to a CD (be sure there are no other files
on this CD.
There is no connection between using a disk created on a home computer and
A
the lifetime of the lens.
4. Connect the power adapter to the iMP-900.
Q Why doesn't the player recognize a CD created at high speed?
(Note : Upgrade the firmware after connecting the adapter)
5. Insert the CD into the iMP-900 and play the CD.
6. Check whether your LCD window shows “Firmware Upgrade”
7. When the power goes off automatically, the upgrade is done.
8. Play your Music Disc and confirm the firmware version information
displayed during loading.
In general, it is recommended to record the CD with 1~2 level lower than the
A
highest speed if you are experiencing playback difficulties.
55
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions and Answers
Questions and Answers
Recording
Recording
Q The player can’t read songs and I get 'No disc' message.
How do I copy MP3 files on to a CD?
Q
A
You need to record MP3 files onto a CD-R or CD-RW disc to play in the iMP-900.
CD readability depends on several factors:
A
1. CD-Media
2. The Burning/Recording Speed
3. The CD surface
When you create a CD, burning speed does matter as well as CD surface. When
you create a CD at a high speed, the data writing may not be reliable. In that case,
it is recommended to create a CD at a lower speed or to use brand name media.
In general, there are two kinds of blank CDs.
CD-R (CD Recordable): Recordable but not erasable.
CD-RW (CD-ReWritable) : Recordable and can be used again after erasing.
There are several ways to burn a CD. A CD is created in sessions.
Single session: Close session after burning once.
Multi session: Do not close session after burning. More data can be
written to the disk later.
Can I add songs to the CD I already burned?
Q
A
Using multi-session or packet writing allows you to add songs to the CD.
This iRiver player can play packet-written CD RW’s as well.
What do I need to burn MP3 files?
Q
A
You need a CD recorder, recording software program, and a blank CD. For
details, refer to the “SUPPORT”at iRiver's homepage.
How do I make a CD from a tape or record?
Q
A
To convert the tape's information into CD requires many items, including:
A player to play the tape or record, a stereo cable to attach the player to your
computer, and third party recording software to capture and edit the audio.
Connect the stereo cable from the source to the line-in input on your computer
sound card; then use the third party software to record and edit the audio on the
tape or record.
Once the music is recorded onto your computer, use a program to copy the music
in Audio or MP3 format to a CD.
I recorded an MP3 CD but I only see less than 20 songs.
Q
A
The CD was probably created as an Audio CD’s will only hold about 15~20
songs. To record a CD full of MP3’s be sure to set your CD creation software to
record Data.
57
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions and Answers
Questions and Answers
Playing
Playing
How do I listen to a spot on the track I last listened to?
It takes a long time to load a CD.
Q
Q
A
The iMP-900 provide a RESUME function. Go to Function, General and enter into
RESUME menu. You can set Track Time or Track #.
The iMP-900 can remember the last 10 CDs you played.
Using Multi-sessioned or Packet Written CD may affect the loading time rather
than using Single sessioned CD because the data is scattered in the CD.
To reduce the loading time, it is recommended you to burn in Single-session.
You may contact Customer Service if it takes longer than 1 minute to load a
single-sessioned CD or a Standard Audio CD.
A
How many playlists can the iMP-900 play?
Q
A
Q
A
The iMP-900 can play up to 20 playlists( .m3u)
*
It always stops after playing one song.
Q
A
How many songs can the iMP-900 play?
Check that the "Auto Pause"feature is turned off.
Also check that your player is not set to “SFL 1”mode.
The iMP-900 can recognize 999 songs (20 Playlist included) and 255 folders
including subfolders.
I hear a 'hiccup' sound while the song is playing.
Q
A1
Does the iMP-900 play “ .ra”and “ .wav” formats?
Check the status of the file. What is likely happening is that the file is corrupted,
especially if you hear the same sound in the same spot. In this case, the music
file is maybe corrupted.
Q
A
The playable formats on the iMP-900 are MP3, WMA, and ASF files.
RA, WAV, and other formats can not be played in this player.
Supporting formats such as “.ra”and “.wav”are under consideration for the
future.
Check whether the sampling frequency and bitrate of the music file is too high
or low. iMP-900 supports from 8KHz, 8Kbps to 44.1KHz, 320Kbps. (In case of
48KHz, supports up to 256Kbps.)
A2
I don't see the title and it only displays Audio Track.
Q
A
The iMP-900 can display the information that the song contains. With MP3 files,
the tag information may not be correct and with Standard Audio CD, it displays
only Audio Track.
To see the song title, you need to burn the CD using CD-TEXT function.
See your CD Creation software.
Can I change the playing order?
Q
A
The iMP-900 supports m3u file lists. Also, the Program function allows you to
select your preferred songs.
Is the sound better if I convert an MP3 file into WAV?
Q
A
The sound cuts out when the player skips.
MP3 is a compressed a audio format. Audio quality is lost when converting
sound into MP3 format. Changing MP3 to WAV files will not restore data lost in
compression and will therefore not improve audio quality.
Q
A
If the player is shaken in a sudden or violent manner, or shaken excessively,
skipping may occur. Under normal circumstances, skipping will not occur.
Please carry and handle the player under normal circumstances (i.e., without
excessive shaking).
59
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting!
Questions and Answers
Playing
Should any problem continue after you have checked these symptoms,
please contact iRiver customer support.
What kind of media can the iMP-900 support?
Q
A
Standard Audio CD (8Cm, 12 Cm), CD-R, CD-RW DATA CD with MP3, ASF and
Check whether the batteries have been inserted
in proper polarity (+ and -).
WMA.
The iMP-900 also supports Mixed CD (Data Track + Audio Track), CD-Extra
(Audio Track + Data Track), Multi-sessioned and packet written CD.
Check whether the HOLD switch on remote is
ON (Switch to OFF position)
Player will not power on
Check whether the player door is opened.
Check whether the rechargeable batteries are
not charged or the batteries ran out.
What is VBR?
Q
A
VBR is "Variable Bit Rate". Some MP3 encoders support VBR. When enabled,
the compressor will use a bit rate that will fit the actual passage. If it is a complex
part, having much more variation in the sound, it will use a high bit rate. If there is
less variation in sound, it will use a lower bit rate. Usually, the average bit rate will
not be as high as a same-quality MP3 with CBR (Constant Bit Rate). However,
there is shortcoming that it's hard to keep track of the actual position that may not
be favorable when studying language.
Check whether the CD is dirty or defective
(clean it or change to new CD).
Check whether the CD is inserted properly.
Check to be sure the optical lens is clean.
(Gently wipe with soft cloth.)
Check whether moisture condensation has
occurred (leave the CD player aside for several
hours until the moisture evaporates).
Make sure there is a CD in the player.
Problems can be caused by the CD creation
process on your PC. Re-record the disk at a
slower speed.
Loading stopped or
'No DISC' displayed on
LCD
Use Full Format when creating packet a written
disk.
Check whether VOLUME is set to “0”.
Connect the earphone/remote plug firmly.
Check whether the plug is dirty (clean the plug
with a dry and soft cloth).
Corrupted MP3, WMA file may have distortion or
not play. Try playing another music file.
Excessive jolting may affect MP3, WMA, and
audio CD disks during playback.
No Sound or noise is
heard
61
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting!
Precautions
On Handling Disc
Should any problem continue after you have checked these symptoms,
please contact iRiver customer support.
On handling Disc
Avoid touching the surface (bright side) where
data is stored.
Check whether the plug is connected to the
AC adapter does not work.
proper jack on the player.
Check whether the HOLD switch is ON.
Disc Cleaning
Remote control does not
(Switch to OFF position.)
work.
Avoid cleaning the disc surface. If necessary,
clean the disc surface with a soft cloth following
the directions described.
Connect the earphones/remote plug firmly.
Ensure the rechargeable batteries are fully
Battery Life is short
charged.
Avoid the excessive operation of remote control.
Do not stick papers or tape labels onto the
surface (bright side).
Check out Menu
General Language and
Characters in LCD are
corrupted.
confirm whether the right language has been
selected. (Refer to page 40.)
Adjust the position of the player and remote
control.
Electronic equipment can case interference with
the FM reception. Turn off any nearby electronics
or move the player away from the source.
Avoid using chemicals to clean the surface.
Poor FM Reception
Check whether the adapter plug is properly
connected.
Check whether the batteries inserted are
rechargeable.
Check whether 2 rechargeable batteries are
inserted. The batteries is charged and discharged
when 2 batteries are inserted.
On safety
charging and discharging
does not work.
Should any solid objects or liquid fall into the player, unplug it and have it
checked by qualified personnel before operating it any further.
Do not put objects in the DC IN 4.5V jack (External Power output).
Use only the adapter provided with the player.
63
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Product Specifications
During playback, dirty or scratched CD's may cause audio distortion or
skipping.
Category
Item
Specifications
Frequency/Range
20Hz~20KHz
Tracks with damaged or corrupted parts are skipped or forwarded to
next track.
9mW (L) + 9mW (R)(32 ) Max. Volume
16mW (R) + 16mW (R) (16 ) Max. Volume
0.57V rms(47K ) Max. Volume
90dB(CD-DA), 90dB(MP3 CD)
3dB (Line Out)
Headphone output
Supported file types will have the extension MP3, WMA and ASF.
Audio
(CD)
Folders and files are sorted in alphabetical order.
Use Navigation mode to select the tracks wanted.
Line output level
S/N ratio
Total 255 folders and 999 tracks (Including 20 playlist) within a disc
can be recognized.
Frequency Characteristics
No. of Channels
FM Frequency range
STEREO (L+R)
Track information displayed is either filename or ID3 TAG information.
87.5MHz~108MHz
CD-TEXT discs are displayed with track names within the TOC (Table
of Contents) of the disc.
FM TUNER S/N ratio
Antenna
50dB
Headphone/Earphone-Cord Antenna
CD-DA, CD-Text(8cm / 12cm)
CD-ROM Mode 1, Mode 2 Form1
Enhanced CD, Mixed CD
Maximum playback time is 120 hours with fully charged internal batteries
and the external battery pack attached.
(When playing Audio CDs, maximum playback time is 50 hours.)
(Reference : MP3, 44.1KHz, 128kbps, Volume Center)
CD Type
CD Support
Packet Write, ISO9660, Joliet,
Romeo, Multi-Session
Battery level indicator may vary depending on battery type and operation
mode.
CD-R/RW Readability
File Type
File Support Bit Rate
Tag
MPEG 1/2/2.5 Layer 3, WMA ,ASF, OGG
8Kbps ~ 320 Kbps
ID3 VI , ID3 V2 2.0, ID3 V2 3.0
DC 4.5V , 1.2A
To shorten the reading time of CD...
AC Adapter
- Set the “MULTI SESSION”to “OFF”.
- Create CDs at a slower speed.
Power Supply Rechargeable Battery
External Battery Pack
Dimension
Stick Type Ni-MH Rechargeable Battery x 2ea
1.5V AA x 4ea
Approx. 128(W) x 135.5(D) x 13.7(H)mm
Approx. 160g(without Battery)
Weight
General
Operational Temperature
0
~ 40
30hrs (with External Battery Pack : 120hrs)
(Ref : MP3, 128Kbps, 44.1KHz)
Maximum Playback Time
65
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warning
Regulatory Information
Federal Communications Commission (FCC)
Safety Warning
The device manufactured and found to comply with limits for a Class B
computing device according to the specifications in FCC rules Part 15.
Operation is subject to the following two conditions;
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
3. If your device needs repairs, you must arrange for the manufacturer to
make them if you are to keep the device's FCC registration valid.
Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER
LOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This equipment, like other electronic equipment, generates and uses radio
frequency energy. If not installed and used according to the instructions in this
manual, this equipment may cause interference with your radio and television
reception.
If you think this equipment is causing interference with your radio or television
reception, try turning the equipment off and on. If the interference problems stop
when the equipment is switched off, then the equipment is probably causing the
interference. You may be able to correct the problem by doing one or more of the
following:
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
- Adjust the position of the radio or TV antenna
- Move away the device from the radio or TV
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
If necessary, consult your dealer or an experienced radio or television technician.
You may find this booklet helpful:"How to Identify and Resolve Radio and TV
Interference Problems"(Stock No. 004-000-00345-4), prepared by the FCC and
available from the U.S Government Printing Office, Washington, DC 20402. See
individual devices FCC ID and registration numbers.
Certain countries may regulate disposal of the battery used to power
this product. Please consult with your local authority.
Listening for many hours at maximum volume may damage your
hearing.
For the customers in Europe
The CE mark on the CD player is valid only for products marketed
in the European Union.
67
68
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
NOTE
69
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|