User Manual
MULTI - CODEC CD PLAYER/FM TUNER
Model iMP-700 Series
Model iMP-700 Series
Thank you for purchasing the product.
Please read the manual carefully before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
NOTE : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT VIEW
Getting started
FCC Certification....................................................................1
Unique Features.....................................................................2
Internet....................................................................................3
Contents.................................................................................4
EQ/+10
MODE/CD
STEREO
FM/
PROGRAM/A-B
MEMORY
(PLAY/PAUSE)
(BACK)
(STOP)
1. Locating the Controls
Front View, Inside View............................................................5
Side View, LCD Window...........................................................6
Remote Control, Basic Operation Function..............................7~8
VOLUME +
(NEXT)
VOLUME -
NAVI/MENU/
PRESET
2. Basic Operation
Listening to Music.....................................................................9~10
Operating the FM Tuner............................................................11~12
("FM Tuner is included on the iMP-700T only.)
OPEN
3. Useful Features
Navigation Mode.......................................................................13
Playback Mode/ iRiver Shock Free...........................................14
Program Mode..........................................................................15~16
+10/EQ Mode............................................................................17
BOOKMARK.............................................................................18
MENU.......................................................................................19~29
Using the Password..................................................................30~31
Using WinAmp Playlist..............................................................32~33
INSIDE VIEW
CD DOOR
4. Additional Information
About Power Supply.................................................................34~36
FAQ...........................................................................................37~42
Trouble Shooting.......................................................................43~44
Precautions...............................................................................45~46
References................................................................................47
Accessories...............................................................................48
Specifications............................................................................49
Regulatory Information..............................................................50
Safety Warning.........................................................................51
BATTERY
COMPARTMENT
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SIDE VIEW
Remote Control
The remote control operates all functions of the player using 1 switch
and 5 buttons.
DC IN 4.5V : Connect the Adapter to charge rechargeable batteries or
using external power. Insert them by matching the + and - polarity.
HOLD
LINE OUT : Use to record to
another audio device or to listen
through your home stereo.
HOLD
REMOTE CONTROL/
EARPHONE
LCD Window
(BACK)
(NEXT)
PLAY /
PAUSE /
MUTE
TRACK NUMBER
PLAYBACK MODE
HOLD
PLAY TIME
BATTERY INDICATOR
M
FOLDER NAME
ARTIST AND SONG TITLE
VOLUME +
VOLUME/ EQ/ LEVEL METER
VOLUME -
FILE
FORMAT
BIT RATE
SAMPLE RATE
PROGRAM / PLAYLIST
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Function
Slide the open button on the side of the player and insert the disc
with the disc label facing out. Close the lid.
To power on, play CD or pause
To power off
Connect Remote Control and Earphones.
Set the HOLD switch to OFF to use the buttons on the remote.
Set the HOLD switch to ON to disable the buttons on the
remote control.
Slide HOLD switch on the remote or the player to the Off position.
<The Player>
<The Remote Control>
Push
Push
to select the previous track, broadcasting or frequency
to select the next track, broadcasting or frequency
Press the PLAY/PAUSE button to play.
<The Player>
<The Remote Control>
Push VOL - to decrease volume
Push VOL + to increase volume
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FM Tuner is included on the iMP-700T only.
While playing a CD, you can switch back and forth between CD and
FM mode with a long click of the Mode button.
The sound output may be delayed
while switching from CD to FM mode.
NOTE
To select Stereo/Mono
The STEREO indicator is displayed
during stereo FM reception.
Power Off
To mute
Play Next Folder (FF Skip)
Play/Pause
STOP
To release the muting
Play Previous Folder (RW Skip)
Selecting Frequency (FM 87.5MHz ~ 108MHz)
To change frequency, push and release
or
.
Play Next Track
or
Go Forward Quickly
Go Backward Quickly
Power Off
(ex : 87.5
87.6)
Auto Scan function : To Auto Scan for a station, release the PRESET
mode by pushing the NAVI button. Find the station by scrolling
Play Previous Track
or
.
or
<PRESET RELEASING>
PRESET Mode : To select memorized channel, push the Navi button
and find the memorized channel by scrolling
or
.
or
File Format displayed as below
ASF
WMA
<PRESET SETTING>
Example)
Conventional
Audio CD
MP3
IRM
FM tuner reception will be affected in weak transmission areas.
When player does not have any preset channels, EMPTY will be displayed at
preset mode then fade out.
IRM (iRiver Rights Management)
iRiver Rights Management is a digital music format.
Please visit our web site for details about this music format.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FM Tuner is included on the iMP-700T only.
NAVIGATION
Memory Function (Save channels)
Push the Navi button to release PRESET mode, select the station by
Navigation mode is useful for quickly searching your files by using file
name. (Refer to page 33 for reservation)
pressing
or
.
MEMORY
01
Press the NAVI button to display the list of audio tracks.
The current track will also be displayed.
Press
and select the
desired channel
or
MEMORY
again
Press the
to play.
or
to select a track
Save complete
Select CH02
Up to 20 channels can be memorized.
: To move to the upper folder.
will exit the
memory function
Select Folder or Move to the upper folder.
Press the or to select a folder to play. And press the NAVI or
button to select the folder.
without saving.
I
Auto memory function : (To save the Channels automatically)
push the Navi button to release PRESET, push and hold the PRGM
button. CH01 to CH20 will be saved automatically with the first 20
stations the player finds.
: To enter the folder
Memory delete function (Delete saved channels)
Select channel to be deleted by pressing the NAVI and
button at PRESET mode.
or
Playing
Press and hold the PRGM button.
01
02
44
KHZ
128
KBPS
L
R
MP
3
: Press the
or
to select a track to play.
The song will be played when you press the play button.
The next channel will appear when channel delete is completed.
Press and hold the PRGM button if you want to delete
the next channel also.
When navigating, the operation of the
is same as the operation of the
move to the upper folder.
button in the remote control
button in the player, so it cannot
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Various ways of music playback are available. Please refer to the MODE
(page 27) for user-defined configurations.
PROGRAM MODE
When MODE button
is pressed, icon in the
playback mode indicator is
changed.
USE PROGRAM MODE TO SELECT SONGS IN A PARTICULAR
ORDER (I.E. PROGRAM YOUR FAVORITE SONGS).
Select Program/Playlist:
Playback play lists if the disc contains
WinAmp play list *.m3u files. (Refer to
page 32~33)
REPEAT
Play a single track repeatedly.
Play all tracks in the folder and stop.
Play all tracks in the folder repeatedly.
Play all tracks in the disc repeatedly.
Activating Program mode
While in Stop Mode
SHUFFLE
Change to Program mode
Randomly play all tracks in the disc repeatedly and stop.
Program mode is activated while in Stop Mode.
Repeat A-B is activated while in Play Mode.
Play a single track repeatedly. Press
to skip to an new random track.
Randomly play all tracks in the folder repeatedly and then stop.
Randomly play all tracks in the folder repeatedly.
Randomly play all tracks in the disc repeatedly.
After selecting the desired track using
+10 button (or NAVI button),
,
,
INTRO
INTRO: Play beginning 10 seconds of each track in sequential order.
INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track
The order of
programmed track
The order of track
in the CD
in sequential order. You can set this function in the MENU function.
iRiver Shock Free
This is the function to prevent skipping when playing a
Standard Audio CD. Press and hold the PRGM button to
activate the iRiver Shock Free Mode. In case the CD is
dirty or defective, iRiver Shock Free may skip more than
normal operation. In this case, use the player after
cancelling the iRiver Shock Free. If STUDY mode is
selected, holding the PRGM button activates the
BOOKMARK function, see page 18).
To add all the songs in a certain folder, use the NAVI button and select the folder
using or button and then press PRGM button. (Subfolders can not be added.)
TO REMOVE A PROGRAMMED SONG
Pressing the Mode button for a
few seconds while playing will
set the Enhanced Anti-shock
on and off.
Select the song to be deleted using the PRGM button and press the Mode button. The
program list will be updated automatically.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Program play
+10 Function
During playback, press the EQ/+10 button to
+10 to go forward 10 tracks.
After programming, press
to play the tracks in sequential order.
The program mode
icon appears
EQ Mode
Press and hold the EQ/+10 button to display the current EQ.
Every time you click this button, the EQ mode scrolls in sequential order.
Cancel Program Mode
While Playing
While in Stop Mode
Interval Repeat
Play a selected interval repeatedly
Press button once to
select the beginning <A>
Point.
Press button again to
select the ending <B>
Point.
Player has only +10 button, not -10 button.
o move -10 songs, you need to set the control in MENU. Move to
the MENU and select Fast Skip. When you set FF/RW skip to 10, you
A-B interval will be repeated.
can go back -10 songs by pressing
button once and hold it.
an I customize the equalizer settings?
es, for details, please refer to page 29 for details on customizing the
EQ in MENU to your own preferences.
When you program songs, using the NEXT/ BACK or +/- button will show
you the songs that aren't programmed.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Function Control is subject to change with different firmware versions.
You can configure your own settings.
BOOKMARK
DISPLAY
back light
TIMER
sleep
pwr off
GENERAL
beep volume
This function allows you to BOOKMARK parts of a track for easier
searching of long audio segments.
resume
fade in
lcd contrast
visualization
scroll type
tag information
time
Bookmark function is activated under the Study mode.
(Refer to page 27 for Study mode.)
language
sort
password
multi session
load default
Long click of PRGM button will add / delete / move the bookmark.
Bookmarks can be reserved up to 20 per disc.
battery indicator
User EQ
MODE
CONTROL
- Bookmark Add : Long click the PRGM button and click the PRGM
button to add the present location into the bookmark.
repeat
shuffle
intro
study
name
fast skip
USER EQ 1
bass boost
treble boost
USER EQ 2
bass boost
treble boost
USER EQ 3
scan speed
remocon button
auto pause
cd esp
adapter volume
sound balance
eq limit
- Bookmark Delete : Long click the PRGM button and click the MODE
button to delete the present location from the bookmark.
Whenever you press the MODE button, the bookmark will be deleted
in backward sequence.
bass boost
treble boost
tag auto eq
Menu Operation
MAIN MENU
Press and hold the NAVI button to display the
menus.
- Moving to next bookmark : Long click the PRGM button and
It is composed of 6 main menus with sub-menus.
press
I
button to move to the next bookmark.
SUB MENU
Moving to previous bookmark : Long click the PRGM button and
press
I
button to move to the previous bookmark.
SUB MENU Setting
or
When you select a sub menu, you can set
your preference to be displayed.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Shift between Menus
GENERAL
Press the
to previous menu, press the
button to move to next menu.
button to move
BEEP VOLUME
Set beep volume level to 0 / 1 / 2 / 3 /4 step.
RESUME
From Main Menu to Sub Menu
You can select how to resume the last track
played. “Track #” plays the beginning of the
last track played, while “Track Time” resumes
to the exact position in the song.
Use the
select a sub menu, press
the NAVI or button to
,
to
display the contents of that
sub menu.
SOUND FADE IN
When activated, volume increases
gradually at playback mode to prevent sudden
loudness.
Change Settings
Use the
,
or
button
to change the settings. Press the
NAVI button to save the setting.
LANGUAGE (supports 39 languages)
Song title and ID3 tag information for the CD is
dependent on the version of the PC operating
system that was used to create it.
(For example, if a CD is created in a Korean
version of Windows, the language setting should
be Korean for proper title display)
Exit Sub Menu
Press the STOP( ) button to exit
the sub menu and to display the
initial setting menu.
SORT
You should set sort while the player is stopped.
If directory structure is like as right picture, the
setting order is like as follows.
BREADTH FIRST :
DEPTH FIRST :
PHYSICAL ADDR. : It is sorted as the sequence of
recording order independent of directory structure.
Press the STOP( ) button at
the initial setting menu to exit
Function Control Mode.
ROOT
Ex)
* You should set sort at stop mode.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PASSWORD
VISUALIZATION
OFF : Password function is not activated.
ON : Password function is activated.
CHANGE : To change the Password
- Refer to page 30~31.
Visualizes audio signal at play mode.
LEVEL METER 1
LEVEL METER 2
WAVEFORM
50%
PROGRESSIVE
MULTI SESSION
OFF : the player will not read Multi Session
written disks
MULTI SESSION
SCROLL TYPE
ON : the player will read Multi Session disks
Vertical : The scroll goes up and down
Horizontal : The scroll goes from the left to
the right.
multi-session
If you are not using audio CD's created in
Multi Session format, set this feature to OFF to
shorten the access time of your CDs.
LOAD DEFAULT VALUE
Initialize to original factory setting.
TAG INFORMATION
ON : Displays track with ID3 tag information
or with lyrics if there are lyrics.
OFF : Displays track with file name.
Button operation is as below
(Select Default Menu)
(move to YES)
(Select YES : INITIALIZATION)
When you turn the tag information ON during
track playback, display will begin with the next track played.
CAPTION OFF : You can turn off lyric display of synchronized MP3. You can
select ON/OFF using
or button.
DISPLAY
button and tag information display preference using
BACK-LIGHT (SEC)
TIME
Select the back-lighting time.
Adjust the lighting time (1~20Sec) by using
Normal : display elapsed time of the
current track.
and
button.
3
Remain : display remaining time of
the current track.
0 : Backlight is off.
21 : Backlight is always on.
ADAPTER ALWAYS ON : Select it by using
connected, backlight is always on.
button.If the adapter is
Note : In case of VBR MP3 file,
the remaining time may not display accurately.
BATTERY INDICATOR
LCD CONTRAST
Adjust the level of the battery indicator to
compensate for different style of batteries.
Lower numbers will make the battery
indicator higher, higher numbers will make
the battery indicator lower.
Adjust LCD contrast of remote control.
Contrast can be adjusted by using the
and
buttons.
23
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER (Set Auto Power Off)
Remote Control button Operation
Remocon button operation is changed.
SLEEP POWER OFF
Automatically power off after fixed time
(Time range can be set from 0 to 99 minutes).
Use
or
button to adjust time.
button, you can select
By using
BEEP
OFF
ON
- NORMAL :
beep sound to ON or OFF.
When the power is off, the sleep power off setting goes back to
Zero setting.
Back
Next
Back
Volume -
Volume +
Volume +
Volume-
STOP POWER OFF
Automatically turns power off at stop mode.
Time range can be made from 1~60 minutes.
- REVERSE :
and
setting.
button can be used for time
Next
CONTROL
AUTO PAUSE
When Auto Pause is on, the player will
FF/RW SKIP (FAST SKIP)
automatically pause after a disc loads and
after every song is played. you will need to
press Play button to resume the playback
again.
Off : Disables the fast skip feature.
10: Fast skip ahead 10 tracks or back
10 tracks.
Directory: Jump to the Previous/Next folder.
Holding after one pushing of
button can be used for this setting.
(Refer to page 10)
and
CD ESP
This is the function to prevent skipping
when playing a Standard Audio CD.
For best sound
FF/RW SCAN SPEED
The fast scan speed can range from 1x / 2x
/ 4x / 6x.
quality, it is recommended to use the
40 SEC option, for maximum skip
protection, 160 SEC option is suggested.
If 160 SEC is selected, the sound quality of the music will be degraded
due to higher compression of the music in comparison with 40 SEC.
and
setting.
button can be used for this
MP3 CD (128Kbps, 44KHz) is always operated 480sec option.
25
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MODE
ADAPTER VOLUME
35 ON : Volume will set to 35 when the AC
adapter is attached.
REPEAT MODE / SHUFFLE MODE
Allows you to select the modes available
when pressing the MODE button during
playback.(Multi selection capable)
MODE
OFF: This function is not activated.
REPEAT MODE
This feature is useful when connecting the
player to your car or home stereo system.
1
DIR
ALL
DIR ALL
scroll
MODE
Press the
between items and press the
select
or
buttons to move
SHUFFLE MODE
SOUND BALANCE
button to
When Sound Balance bar is moved to
L (Left, 0),the sound outputs at the left
earphone. When the lever is moved to
R (Right, 40) the sound outputs at the right
earphone. The default value is 20 and the
sound outputs the same level at both
earphones.
SHUFFLE
1
DIR
ALL
DIR ALL
Only the selected play mode will be
applied when you press the MODE
button (For details, please refer to p. 15)
EQ LIMIT
INTRO MODE
MODE
ON : Limit the control of equalizer
frequency to prevent distortion of sound.
OFF : You can enjoy original sound though
distortion may occur.
INTRO MODE
Intro : Plays the beginning 10 seconds of
OFF
each track.
ON
Intro Highlight : Plays 10 seconds at the
1 minute mark of each track in sequential
order.
HIGHLIGHT ON
TAG AUTO EQ
Can automatically change EQ by reading
the genre of TAG Information.
ON : Can automatically change EQ by
reading the genre of ID3 TAG information.
OFF : EQ is set by the user.
STUDY MODE
When click the +10 button, it is operated
as the set status.
tag auto eq
OFF : Skip ahead 10 tracks.
5 SEC : Short click of the +10 button
will skip the current track
5 seconds ahead.
10 SEC : Short click of the +10 button
will skip the current track 5 seconds ahead.
BEEP : A beep sound will be played when the buttons are operated.
EQ is selected by genre as follows :
Pop : Pop, Instrumental Pop, Pop-Folk, Pop/Funk
Rock : Classic Rock, Rock, Altern Rock, Instrumental Rock, Southern Rock,
Rock & Roll, Hard Rock, Folk Rock, Gothic Rock, Progressive Rock,
Psychedenic Rock, Symphonic Rock, Slow Rock, Punk Rock
Jazz : Jazz, Jazz+Funk, Acid Jazz
Classic : Classical, Opera, Chamber Music, Sonata, Symphony
Metal : Metal, Death Metal, Heavy Metal
If it is set to 5 Sec, 10 Sec, BEEP, it is operated as STUDY Mode.
Ubass : Bass, Booty Bass
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NAME You can input your name or custom text.
USER EQ
(maximum 12 characters in English)
You can set the EQ according to your liking.
(USER 1, USER 2, USER 3)
BASS BOOST
Bass Boost level is from 0 to 18dB.
Select the character by using
and
button.
dB
Press NAVI button to input the character.
TREBLE BOOST
Treble Boost level is from 0 to 6dB.
To move the cursor in the name window, use + and -
on Volume button.
dB
To delete the character, use MODE button.
It scrolls by order of Korean/ALPHABET/Special
Character by pressing STOP button.(Special
characters are only available when “Language” is set
to Korean.)
What is FIRMWARE?
It is the operating system that works in the iMP-700 Series.
iRiver provides you with the latest and best features through Firmware
To save the text and exit, use PLAY button.
The saved text is displayed during initial loading of disc and at stop mode
during play.
How to UPGRADE?
2. Execute the file after extraction.
Initial loading
3. Make upgrade disc containing the IMP-700.hex file.
4. Connect the adapter to the iMP-700 Series.
5. Insert the CD into the iMP-700 Series and play the CD.
6. Check whether your LCD window shows “Firmware Upgrade”
7. When the power goes off automatically, the upgrade is done.
8. Play your Music Disc and confirm the firmware version information
displayed during loading.
Stop during playback
29
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Password
Changing the Password
Select “CHANGE” on the “MENU
Input the old password. (The
initial password is “0000”)
Select the menu you want on the “MENU
(Refer to page 22)
GENERAL
Password”.
GENERAL
Password”.
The Password must be 4 digits.
After selecting the numeral by using
NAVI button to input the password.
,
button, press the PLAY or
Input the new password of 4 digits
to confirm once more.
Input the new password of 4
digits.
or
or
If you select “ON” on the MENU
GENERAL
Password, the right screen
is displayed after loading screen when
you turn the player on.
NOTE
Press
,
to move the numeral and press the PLAY or NAVI button
If the password to change and the password to confirm are the same,
the password is automatically changed to the new one and the playback
screen is displayed on the LCD.
to select it. The screen as below is displayed.
If you select “ON” on the password menu, you must input the new password
to turn on the player.
When the input password is correct, the above screen is disappeared and
changed to Total screen. Press the PLAY button to start the playback.
If the password to confirm is different from the changed password, the
password screen goes back to the Confirm screen.
- If the password is wrong, the screen goes back to the input screen.
Press the STOP button to exit changing the password, and the old
password is preserved.
CAUTION!
The Password is initialized as “0000” when the firmware is upgraded.
- The Password must input as 4 digits.
- The Password is initialized as “0000” when the firmware is upgraded.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE WINAMP PLAYLIST
Press
button to play the tracks
in the order of the playlist.
Make a PLAYLIST ( .M3U) using WINAMP.
Note : WINAMP software is not included with the player.
1. Launch WINAMP and add songs to
make a list.
Winamp execution picture
PL icon indicates PLAY LIST.
2. Click "LIST OPTS" located on the
right bottom and click "SAVE LIST"
A total of 20 playlists can be recognized.
Click the SAVE LIST button.
RESERVATION FUNCTION
3. Name the file name (ex:
iriver.m3u) and click "SAVE" to
save the list.
Press the NAVI button during playback to select the next song to
be played, then press PRGM button to queue that song.
Ex)
Press NAVI/MENU
button during playback,
Save to the player with the .M3U and the files added to the playlist.
Load the disc into iMP-700 Series.
After selecting the song to play next by
Press PRGM button at stop mode and LCD
displays a list of M3U playlist files on the disk.
You can find the playlist you want to play by
using
button,
using the
,
button.
33
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Rechargeable batteries are optional.
iMP-700T : Included
iMP-700 : Optional
Recharging Method
Using AC POWER ADAPTER
The recharge function is available while the player has rechargeable batteries
installed and connected to AC power adapter.
The charging menu on the LCD is displayed when press and
hold the stop ( ) button during playback.
Use only the AC Power Adapter supplied with the player.
The AC operating voltage of this player is 100~240V, 50~60Hz.
Connect the Adapter to 4.5V DC jack on the player and AC outlet.
While in Charge Mode, long press of stop ( ) button turns the POWER OFF.
While in Charge Mode, long press of
stop charging.
button starts the playback after
Install Rechargeable batteries. And press
Adapter.
button after connecting to
During CD playing or Tuner playing, long pressing of STOP ( ) button shifts
to charge mode.
Select Charge Mode
Use the
,
button to move to charge
mode and click the STOP ( ) button to select
charge mode. The selected mode (CHARGE or
CANCEL) automatically begin charging after 1
minute passes without menu selection (when
plugged into AC adapter).
: The player is turned off
without charging.
: The player is
under charging.
Automatically power off when charge
is done.
CHARGING screen is as follow
Charging time
- 1850mA rechargeable batteries :
Approx. 6.5 hours
(At full discharge)
CAUTION!
CAUTION!
Charge with Ni-MH (Nickel Metal Hydride Battery) batteries only.
Do not mix rechargeable batteries with alkaline batteries.
Do not charge non-rechargeable batteries such as Alkaline.
It may cause leakage or explosion of the battery or malfunction.
Do not use batteries with the different capacity.
Disconnect Adapter when not in use.
Do not handle this player or power cord when your hands are wet or
damp. If water or other liquid enters the case, take the player to an
authorized service center for inspection.
– it may not be charged properly
35
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using general batteries
PLAYER
Open the battery cover on the inside of the player.
How long does Anti-Shock last?
With MP3 files, Anti-Shock lasts up to 480 seconds.
With Audio CD, you can set it up to 40 or 160 seconds.
Insert batteries(AA size x 2ea) matching + and - and close the battery
cover.
Why does mechanism noise occur?
When loading a CD or searching music, CD Pick-up makes noise moving at
high speed. This is not a malfunction. But if you hear mechanism noise
through earphones or hear excessive noise from the player, contact iRiver
Customer Service.
Does using CD's created on a computer reduce the life of the Lens?
There is no connection between using a disk created on a home computer
and the lifetime of the lens.
Why doesn't the player recognize a CD created at high speed?
In general, it is recommended to record the CD with 1~2 level lower than
the highest speed if you are experiencing playback difficulties.
Manganese batteries are not recommended as they tend to reduce
playback time.
For optimum playback time, Alkaline batteries are recommended.
CAUTION!
Do not mix rechargeable batteries with regular batteries.
Do not use different types of batteries together.
When the batteries are not to be used for a long time, remove them.
If battery leaks, wipe off any residue in the battery compartment and
insert new batteries.
Do not recharge a normal battery.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
I recorded an MP3 CD but it only see less than 20 songs.
ow do I copy MP3 files on to a CD?
The CD was probably created as an Audio CD’s will only hold about 15~20
songs. To record a CD full of MP3’s be sure to set your CD creation
software to record Data.
ou need to record MP3 files onto a CD-R or CD-RW disc to play in the
iMP-700 Series.
In general, there are two kinds of blank CDs.
CD-R (CD Recordable): Recordable but not erasable.
CD-RW (CD-ReWriteable) : Recordable and can be used again after
erasing.
The player can’t read songs and I get 'No disc' message.
CD readability depends on several factors:
1. CD-Media
2. The Burning/Recording Speed
3. The CD surface
There are several ways to burn a CD. A CD is created in sessions.
When you create a CD, burning speed does matter as well as CD surface.
When you create a CD at a high speed, the data writing may not be
reliable. In that case, it is recommended to create a CD at a lower speed or
to use brand name media.
Single session: Close session after burning once.
Multi session: Do not close session after burning. More data can be
written to the disk later.
This iRiver player can play packet-written CD RW’s as well.
Can I add songs to the CD I already burned?
hat do I need to burn MP3 files?
Using multi-session or packet writing allows you to add songs to the CD.
ou need a CD recorder, recording software program, and a blank CD.
For details, refer to the “SUPPORT” at iRiver's homepage.
ow do I make a CD from a tape or record?
o convert the tape's information into CD requires many items, including:
A player to play the tape or record, a stereo cable to attach the player to
your computer, and third party recording software to capture and edit the
audio. Connect the stereo cable from the source to the line-in input on
your computer sound card; then use the third party software to record and
edit the audio on the tape or record.
Once the music is recorded onto your computer, use a program to copy
the music in Audio or MP3 format to a CD.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING
How do I listen to a spot on the track I last listened to?
It takes a long time to load a CD.
Using Multi-sessioned or Packet Written CD may affect the loading time
rather than using Single sessioned CD because the data is scattered in the
CD.
The iMP-700 Series provide a RESUME function. Go to Function, General
and enter into RESUME menu. You can set Track Time or Track #.
The iMP-700 Series can remember the last 10 CDs you played.
To reduce the loading time, it is recommended you to burn in Single-
session. You may contact Customer Service if it takes longer than 1 minute
to load a single-sessioned CD or a Standard Audio CD.
How many playlists can the iMP-700 Series play?
The iMP-700 Series can play up to 20 playlists( .m3u)
How many songs can the iMP-700 Series play?
It always stops after playing one song.
Check that the "Auto Pause" feature is turned off. Also check that your
player is not set to “SFL 1” mode.
The iMP-700 Series can recognize 999 songs and 255 directories
including subdirectory.
I hear a 'hiccup' sound while the song is playing.
Does the iMP-700 Series play “ .ra”and “ .wav” formats?
Check the status of the file. What is likely happening is that the file is
corrupted, especially if you hear the same sound in the same spot. In this
case, it is recommended you to record the file again or download a
different file.
The playable formats on the iMP-700 Series are MP3, ASF and WMA files.
RA and WAV formats can not be played in this player.
Supporting formats such as “ .ra” and “ .wav” are under consideration for
the future.
I don't see the title and it only displays Audio Track.
Can I change the playing order?
The iMP-700 Series support m3u file lists. Also, the Program function
allows you to select your preferred songs.
The iMP-700 Series can display the information that the song contains.
With MP3 files, the tag information may not be correct and with Standard
Audio CD, it displays only Audio Track.
To see the song title, you need to burn the CD using CD-TEXT function.
See your CD Creation software.
I can't hear an ASF file I recorded onto a disk.
There are two kinds of ASF files, Audio and Video. The iMP-700 Series
only support Audio ASF file formats.
The sound cuts out when the player skips.
If the player is shaken in a sudden or violent manner, or shaken
excessively, skipping may occur. Under normal circumstances, skipping
will not occur. Please carry and handle the player under normal
circumstances (i.e., without excessive shaking).
Is the sound better if I convert an MP3 file into WAV?
MP3 is a compressed a audio format. Audio quality is lost when converting
sound into MP3 format. Changing MP3 to WAV files will not restore data
lost in compression and will therefore not improve audio quality
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Should any problem continue after you have checked these symptoms,
please contact iRiver sales representatives.
Check whether the batteries have been inserted
in proper polarity (+ and -).
What kind of media can the iMP-700 Series support?
Standard Audio CD (8Cm, 12 Cm), CD-R, CD-RW DATA CD with MP3,
ASF and WMA.
The iMP-700 Series also support Mixed CD (Data Track + Audio Track),
CD-Extra (Audio Track + Data Track), Multi-sessioned and packet written
CD.
Check whether the HOLD switch on remote is
ON (Switch to OFF position)
Check whether the player door is opened.
Check whether the rechargeable batteries are
not charged or the batteries ran out.
Player will not power
on
Check whether the CD is dirty or defective
(clean it or change to new CD).
Check whether the CD is inserted properly.
Check to be sure the optical lens is clean.
(Gently wipe with soft cloth.)
What is VBR?
VBR is "Variable Bit Rate". Some MP3 encoders support VBR. When
enabled, the compressor will use a bit rate that will fit the actual passage. If
it is a complex part, having much more variation in the sound, it will use a
high bit rate. If there is less variation in sound, it will use a lower bit rate.
Usually, the average bit rate will not be as high as a same-quality MP3 with
CBR (Constant Bit Rate). However, there is shortcoming that it's hard to
keep track of the actual position that may not be favorable when studying
language.
Check whether moisture condensation has
occurred (leave the CD player aside for several
Loading stopped or
'No DISC' displayed on
LCD
hours until the moisture evaporates).
Make sure there is a CD in the player.
Problems can be caused by the CD creation
process on your PC. Re-record the disk at a
slower speed.
Use Full Format when creating packet a written
disk.
Check whether VOLUME is set to “0”.
Connect the earphone/remote plug firmly.
Check whether the plug is dirty (clean the plug
with a dry and soft cloth).
Corrupted MP3, WMA file may have distortion
or not play. Try playing another music file.
Excessive jolting may affect MP3, WMA, and
audio CD disks during playback.
No Sound or noise is
heard
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Should any problem continue after you have checked these symptoms,
please contact iRiver sales representatives.
On Handling Disc
On handling Disc
Be sure your adapter is designed to work in the
country where it's being used.
Avoid touching the surface (bright side) where
data is stored.
AC adapter does not
work.
Check whether the plug is connected to the
proper jack on the player.
Disc Cleaning
Check whether the HOLD switch is ON.
Remote control does
Avoid cleaning the disc surface. If necessary,
clean the disc surface with a soft cloth following
the directions described.
(Switch to OFF position.)
not work.
Connect the earphones/remote plug firmly.
Ensure the rechargeable batteries are fully
Battery Life is short
charged.
Do not stick papers or tape labels onto the
surface (bright side).
Avoid the excessive operation of remote control.
Check out Menu
confirm whether the right language has been
selected. (Refer to page 21.)
General
Language and
Characters in LCD are
corrupted.
Avoid using chemicals to clean the surface.
Adjust the position of the player and remote
control.
Poor FM Reception
(FM Tuner is included
on the iMP-700T only.)
Electronic equipment can case interference with
the FM reception. Turn off any nearby
electronics or move the player away from the
source.
On Safety
Check whether the adapter plug is properly
connected.
Should any solid objects or liquid fall into the player, unplug it and have it
checked by qualified personnel before operating it any further.
Check whether the batteries inserted are
rechargeable.
Fully charged batteries will not accept additional
charging.
Check whether the CHARGE FUNCTION in the
menu is set to “CHARGE ON”
Recharging does not
work.
Do not put objects in the DC IN 4.5V jack (External Power output).
Use only the adapter provided with the player.
45
44
Download from Www.Somanuals.com. All Manuals Search And Download.
On Player
During playback, dirty or scratched CD's may cause audio distortion or
skipping.
Do not leave the player in a location near heat sources, or in a place
subject to direct sunlight, excessive dust or sand, moisture, rain,
Mechanical shock, unleveled surface, or in a car with its windows
closed.
Tracks with damaged or corrupted parts are skipped or forwarded to
next track.
Keep the lens on the player clean and do not touch it. If you do so, the
lens may be damaged and the player will not operate properly.
Supported file types will have the extension MP3, WMA and ASF.
Do not put any heavy objects on top of the CD player. The CD player
and the CD may be damaged.
Folders and files are sorted in alphabetical order.
Use Navigation mode to select the tracks wanted.
Do not wrap the player with cloth or blanket as it may cause the player
to malfunction. Use only the included carrying case.
Total 255 folders and 999 tracks (Including playlist) within a disc can
be recognized.
Track information displayed is either filename or ID3 TAG information.
CD-TEXT discs are displayed with track names within the TOC (Table
of Contents) of the disc.
On Headphones and Earphones
Road Safety
Battery level indicator may vary depending on battery type.
Do not use headphones/earphones while driving, cycling, or operating any
motorized vehicle. It may create a traffic hazard and is illegal in many
areas. It can also be potentially dangerous to play your headsets at high
volume while walking, especially at pedestrian crossings. You should
exercise extreme caution or discontinue use in potentially hazardous
situations.
Preventing hearing damage
Avoid using headphones/earphones at high volume. Hearing experts
advise against listening to continuous, loud and extended play. If you
experience a ringing in your ears, reduce volume or discontinue use.
Consideration for others
Keep the volume at a moderate level. This will allow you to hear outside
sound and to be considerate of the people around you.
47
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Model No
iMP-700T
Included
iMP-700
Earphone and Earphone Covers
User Manual/Warranty Card
FM TUNER
Not available
Category
Item
Specifications
Frequency/Range
20Hz~20KHz
12mW(L) +12mW(R) at 16
8mW(L) + 8mW(R) at 32
Max. Volume
Headphone output
Audio
(CD)
Line output level
S/N ratio
0.76V rms(47K ) Max. Volume
90dB(CD-DA), 90dB(MP3 CD)
2dB(Line Out)
AC Adapter
Batteries (Two)
Frequency Characteristics
No. of Channels
FM Frequency range
STEREO(L+R)
87.5MHz~108MHz
12mW(L) +12mW(R) at 16
8mW(L) + 8mW(R) at 32
Max. Volume
Headphone Output
Audio
(FM TUNER)
Line output level
S/N ratio
0.76V rms(47K ) Max. Volume
50dB
Rechargeable batteries are optional.
iMP-700T : Rechargeable Batteries.
iMP-700 : Alkaline Batteries
Antenna
Headphone/Earphone-Cord Antenna
CD-DA, CD-Text(8cm / 12cm)
CD-ROM Mode 1, Mode 2 Form1
Enhanced CD, Mixed CD
Packet Write, ISO9660, Joliet, Romeo,
Multi-Session
Remote Control
CD Type
CD Support
CD-R/RW Readability
File TYPE
MPEG 1/2/2.5 Layer 3, WMA ,ASF
8Kbps ~ 320 Kbps
Bit Rate
File Support
Power Supply
General
Tag
ID3 VI , ID3 V2 2.0, ID3 V2 3.0
DC 4.5V , 600mA
AC Adapter
Dimension
Weight
Approx. 135(W) x 148.6(D) x 33.6(H)mm
Approx. 255g (without Battery)
Operational Temperature
MP3/WMA/ASF
Audio CD
0
~ 40
Accessories subject to change without notice and may
vary from image shown.
33 Hrs
11 Hrs
Maximum
Playback Time
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission (FCC)
Use of controls, adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
CAUTION-INVISIBLE LASER
RADIATION WHEN OPEN AND INTER
LOCKS DEFEATED, AVOID EXPOSURE
TO BEAM.
The device manufactured and found to comply with limits for a Class B
computing device according to the specifications in FCC rules Part 15.
Operation is subject to the following two conditions;
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
3. If your device needs repairs, you must arrange for the manufacturer to
make them if you are to keep the device's FCC registration valid.
WARNING
This equipment, like other electronic equipment, generates and uses radio
frequency energy. If not installed and used according to the instructions in this
manual, this equipment may cause interference with your radio and television
reception.
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
If you think this equipment is causing interference with your radio or television
reception, try turning the equipment off and on. If the interference problems stop
when the equipment is switched off, then the equipment is probably causing the
interference. You may be able to correct the problem by doing one or more of the
following:
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Certain countries may regulate disposal of the battery used to power
this product. Please consult with your local authority.
- Adjust the position of the radio or TV antenna
- Move away the device from the radio or TV
Listening for many hours at maximum volume may damage your
hearing.
If necessary, consult your dealer or an experienced radio or television technician.
You may find this booklet helpful:"How to Identify and Resolve Radio and TV
Interference Problems"(Stock No. 004-000-00345-4), prepared by the FCC and
available from the U.S Government Printing Office, Washington, DC 20402. See
individual devices FCC ID and registration numbers.
For the customers in Europe
The CE mark on the CD player is valid only for products
marketed in the European Union.
51
50
Download from Www.Somanuals.com. All Manuals Search And Download.
53
52
Download from Www.Somanuals.com. All Manuals Search And Download.
|