USB Print Server
User Manual (GMFPSU01)
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you for purchasing this 1-port USB Print Server that allows any networked computer to share
a USB printer. It complies with USB 1.1 specifications, and provides users with an auto-sensing
10/100Base-T port. It works with either 10BaseT or 100BaseT networks. The built-in web management
feature provides more convenience by allowing the user to configure, monitor and even reset the print
server via a web browser. This eliminates the need to place the printer right next to the computer.
We hope that you will enjoy using your Print Server and find it to be a useful solution.
©2006 IOGEAR. All Rights Reserved. PKG-M0319
IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and
Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Ma-
chines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty
of any kind with regards to the information presented in this document. All information furnished here is for informational
purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or
errors that may appear in this document.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Package Contents
Features
05
06
07
08
09
10
22
33
41
42
System Requirements
Introduction
Hardware Setup
Software Installation
Software Configuration
Web Administration
Technical Support
Limited Warranty
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
This package contains:
• 1 USB Multi-Function Print Server
• 1 CAT5 patch cable
• 1 User manual
• 1 Installation CD
• 1 Warranty/registration card
• 1 Power adapter
* If any items are damaged or missing, please contact your dealer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
• Allows multiple users to share a Multi-Function Printer (MFP) over the network to Print, Scan, and Fax
from any networked computer
•Print text documents and color photos without compromising quality
•Fax documents over the network and at the convenience of your desk without the clutter
•Scan documents or photos in high-resolution color format
•One USB port compliant with USB 1.1 specification
•One network port for support of 10/100Base-T networks
•Web interface allows for easy configuration and monitoring
•Firmware upgradeable via web interface
6
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
This USB print server supports:
• Windows 2000/XP
• Printer with USB connection
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IOGEAR’s palm-sized USB Multi-Function Print Server allows any networked computer to share a USB
Multi-Function Printer (MFP). This multi-function server goes a step beyond ordinary print servers by
allowing multiple network users to Print, Scan, and Fax using the same Multi-Function Printer. This elimi-
nates the need to purchase multiple expensive MFPs as all you need to share the printer is a connection
to the print server’s network port.
It complies with USB 1.1 specifications, and provides users with an auto-sensing 10/100Base-T port.
The print server will even automatically identify your printer make/model upon connection. The built-in
web management feature provides more convenience by allowing the user to configure, monitor and
even reset the print server via a web browser.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Setup
Hardware Setup
1) Plug the included power adapter into the print server and a power outlet near the multifunction
printer.
2) Plug the network port of the print server into a network switch or available LAN port on a router using
standard Ethernet patch cable.
3) Plug the USB cable from your multifunction printer into the USB port on the print server and make
sure the printer is powered on.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
Software Installation (repeat on each networked computer)
1) Insert the Setup CD into your computer.
2) Click the Installation button on the
window that opens.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
3) Choose a language to use for installation and click OK.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
4) Click Next at the first screen of the setup wizard.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
5) Choose a folder to install the print server software or just click Next.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
6) Choose a folder in the start menu to launch the software from or just click Next.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
7) On Windows XP, a window may come up warning you that this software has not been tested
by Microsoft and certified by their Windows Logo program. If so, simply click Continue Anyway to
continue with installation.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
8) When the installation is complete, click OK.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
9) If you would like the print server software to run automatically when starting your computer (recom
mended), leave the box checked and click Finish.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
On Windows XP systems, the Found New Hardware wizard may pop up during installation. You will
need to do the following to complete the driver installation:
1) If asked if Windows can connect to the internet to search for software, click the No, not this time
option and then click Next.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
2) When asked how the wizard should install software, leave Install the software automatically
selected and click Next.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
3) If you see another warning that the software has not been Windows Logo certified by Microsoft, click
Continue Anyway.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
4) Click Finish to complete the Found New Hardware wizard.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
Software Configuration (repeat on each networked computer)
1) Launch the IOGear MFP Utility program from the start menu or icon on the desktop.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
2) If you have Windows XP and the Windows Firewall is enabled you will see this window pop up when
the Utility is first launched. Make sure you click the Unblock button to allow communication with the
print server. Other software firewalls may display similar options – make sure the print server
software is allowed to bypass such programs.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
3) The Utility will search your network for the print server and display it in the window. If no print server
is found please make sure any third party firewalls such as Norton Internet Security, McAfee
Personal Firewall, or ZoneAlarm have been disabled or bypassed and click the Search button to try
again.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
4) If your printer software has already been installed, skip ahead to step 7. Otherwise, once the print
server has been found, close the window with the X button in the top right corner (NOT the one
labeled Exit) to hide the Utility for now.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
5) Install the software that came with your printer. When the drivers for the printer have finished
installing OR the software asks you to plug in the printer using a USB cable, you are ready to
“connect” the device.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
6) You should see a small USB icon like this in the tray in the lower right corner of your screen.
Double-click on the icon to open the Utility window again.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
7) Click the plus in front of the print server name to show the name of the attached printer. Then select
the printer name and click the Connect button in the Utility.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
8) The printer should be detected as if it was plugged directly into the computer. Finish any remaining
setup needed by the printer software. Your multifunction printer should be ready to use.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
9) If you would like the connection to this printer to be restored automatically when the Utility software
launches, you will need to add the device to your favorites list. Click the plus in front of Connected
devices and right-click the name of the printer. Choose Add to favorites from the menu that pops up.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
10) Click OK to confirm that the printer is in your favorites list.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Configuration
11)Once you have connected to the print server you can close the Utility window. Be sure to use the
close box with an X in the top right corner so that the Utility continues to run in the background. The
large button labeled Exit will shut down the Utility and disconnect your computer from the printer.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Web Administration (advanced options)
Normally you will not need to change the name or IP address used by the print server. However, if you
have multiple print servers or want to override these default settings for another reason, you may do so
using the Web Administration tool. This tool may also be used to upgrade the firmware on your print
server, which may be needed if your printer model is very new. Simply select the server from the MFP
Utility and click the Web Admin button. Internet Explorer will launch and connect to the built-in web
interface on your print server.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Changing the print server name
The default name may not be convenient if you have multiple print servers. If you would like to change
the print server’s name to something more meaningful such as “Front Office” or “Accounting Scanner”
you can do so with the Web Admin tool. First click the Setup button, then make sure the System tab is
selected.
Here you can type in whatever name you like for the print server, click Save & Restart, and future
searches with the MFP Utility will identify the server with its new name.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Protecting the Admin tool with a password
If you would like to prevent unauthorized access to the Admin tool, you can establish a password from
the same System tab of the Setup section shown above. Type in your password twice to confirm it,
then click Save & Restart. When the server reboots, and for all future access to the Admin tool, you will
be prompted for a username and password. Type “admin” for the username and then the password you
created to proceed to the Web Admin tool.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Changing the IP address
Normally the server requests an IP address automatically from your router or other DHCP server on the
network. If you would prefer to specify an address, you can do so by clicking the Setup button, then on
the TCP/IP tab.
Make sure the network settings you enter are valid, or the print server may become inaccessible. When
you are sure everything is correct, click Save & Restart to apply the changes.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Restoring factory default settings
If you would like to restore all settings on the print server to their original configuration and can still
access the Web Admin tool, simply click on the Misc button and make sure the Factory Default tab is
selected. Clicking OK will immediately reset all options to their defaults and reboot the print server.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Upgrading the firmware
In some cases, a firmware upgrade may be necessary to get the full functionality of your MFP device,
especially if you have a brand new model. If you are experiencing any compatibility issues please
Download the latest version to your computer and make sure that you unzip it if necessary. The file
name should end in “.BIN” when you are done. Then click the Misc button in the Web Admin tool. Click
Firmware Upgrade and you should see the following page:
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
Click the Browse button and you will be asked to locate the firmware upgrade file you just downloaded.
Select it and click Open.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Administration
You will see the location you selected in the box next to the Browse button. Click the button at the
bottom labeled Firmware Upgrade to load the new firmware onto the server.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at
www.iogear.com/support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed
to provide you with the latest technical information about our products. Most of the answers to your ques-
tions can be found here, so please try it out before contacting technical support.
Technical support is available Monday through Friday from 8:00 am to 5:00 pm PST and can be reached
at 866-9-IOGEAR or 866-946-4327
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK
OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to
the contents or use of this documentation, and especially disclaims its quality, performance, merchant-
ability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation without obliga-
tion to notify any individual or entity of such revisions, or updates. For further inquires please contact
your direct vendor.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Info.
Hubble
•
Irvine, CA 92618
•
(P) 949.453.8782
•
(F) 949.453.8785
•
Download from Www.Somanuals.com. All Manuals Search And Download.
|