PowerScan® D8530
Reference Manual
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this
documentation or the procedures described therein may be reproduced or
transmitted in any form or by any means without prior written per-mission of Datalogic
Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
Owners of Datalogic products are hereby granted a non-exclusive, revocable license
to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all
notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions
by contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.scanning.datalogic.com) or provided
on appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that
is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice. Datalogic is a registered trademark of
Datalogic S.p.A. in many countries and the Datalogic logo is a trademark of Datalogic
S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade names
referred to herein are property of their respective owners.
20/02/2008
ii
CONTENTS
GENERAL VIEW .......................................................................................... v
COMPLIANCE.............................................................................................. v
FCC Compliance...........................................................................................vi
Laser Safety..................................................................................................vi
WEEE Compliance ....................................................................................... x
PATENTS .................................................................................................... xi
1
1.1
1.2
1.3
1.3.1
1.3.2
1.3.3
1.4
Package Contents......................................................................................... 1
Configuration Methods.................................................................................. 2
Reading Configuration Codes....................................................................... 2
2
2.1
2.2
2.3
2.3.1
2.3.2
2.4
2.4.1
2.4.2
2.5
USING POWERSCAN® D8530.................................................................... 5
Aiming System.............................................................................................. 5
Normal Operation.......................................................................................... 6
Image Capturing ........................................................................................... 6
Basic Configuration Parameters ................................................................... 7
Advanced Configuration Parameters ............................................................ 8
Autoscanning ................................................................................................ 8
Normal Mode ................................................................................................ 8
Pattern Mode ................................................................................................ 8
Camera Control............................................................................................. 9
Defining Data Formatting ............................................................................ 10
Concatenation............................................................................................. 11
2.6
2.6.1
3
INITIAL SETUP .......................................................................................... 12
3.1
RS-232 Interface Selection ......................................................................... 12
iii
3.2
3.3
Wedge Interface Selection.......................................................................... 13
USB Interface Selection.............................................................................. 14
4
4.1
4.2
4.3
4.3.1
4.3.2
4.3.3
4.3.4
Default Settings........................................................................................... 18
Changing Default Settings .......................................................................... 23
Advanced Data Format............................................................................... 88
Format Definition......................................................................................... 89
Match Conditions ...................................................................................... 106
Format Enable/Disable ............................................................................. 108
Mismatch Result ....................................................................................... 109
5
5.1
REFERENCES ......................................................................................... 110
RS-232 – USB COM................................................................................. 110
ACK/NACK Protocol ................................................................................. 110
RX Timeout............................................................................................... 110
USB Keyboard .......................................................................................... 111
Keyboard Speed ....................................................................................... 111
Code Selection.......................................................................................... 111
Issue Identical Codes................................................................................ 111
Reading Parameters................................................................................. 111
Safety Time............................................................................................... 111
Configuration Editing Commands ............................................................. 112
5.1.1
5.1.2
5.2
5.2.1
5.3
5.3.1
5.4
5.4.1
5.5
6
7
TEST CODE SYMBOLS........................................................................... 113
MAINTENANCE ....................................................................................... 115
8
8.1
8.1.1
8.1.2
8.1.3
TECHNICAL FEATURES......................................................................... 116
Indicators .................................................................................................. 120
PowerScan® D8530 LED Indicators......................................................... 120
Beeper ...................................................................................................... 120
Good Read Spot ....................................................................................... 120
Function Description ................................................................................. 133
iv
CE COMPLIANCE
This is a Class A product . In a domestic environment this product
may cause radio interference, in which case the user may be
required to take adequate measures.
WARNING
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference which may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
LASER SAFETY
The PowerScan® D8530 hand-held reader is a Class 1 LED product regarding its
Illuminator and a Class 2 laser product regarding its Aiming System.
LED Illuminator
The use of an illuminator in the PowerScan® D8530 Family is a Class 1 LED
product:
ILLUMINATORE LED CLASSE 1
AUSLEUCHTER LED KLASSE 1
ILLUMINATEUR A LED DE CLASSE 1
ILUMINADOR LED DE CLASE 1
vi
Aiming System
The PowerScan® D8530 aiming system meets the requirements for laser safety.
I
D
F
E
LA LUCE LASER È
VISIBILE ALL'OCCHIO
UMANO E VIENE
EMESSA DALLA
FINESTRA INDICATA
NELLA FIGURA.
DIE LASER-
LE RAYON LASER EST LA LUZ LÁSER ES
STRAHLUNG IST FÜR
DAS MENSCHLICHE
AUGE SICHTBAR UND
VISIBLE À L'OEUIL NU
ET IL EST ÉMIS PAR
LA FENÊTRE
VISIBLE AL OJO
HUMANO Y ES
EMITIDA POR LA
VENTANA INDICADA
WIRD AM STRAHLAUS- DÉSIGNÉE SUR
TRITTSFENTSTER
AUSGESENDET
(SIEHE BILD)
L'ILLUSTRATION DANS EN LA FIGURA.
LA FIGURE
LUCE LASER NON
FISSARE IL FASCIO
LASERSTRAHLUNG
NICHT IN DEN STRAHL DE REGARDER LE
BLICKEN PRODUKT
DER LASERKLASSE 2
MAXIMALE
RAYON LASER EVITER RAYO LÁSER NO
MIRAR FIJO EL RAYO
APARATO LÁSER DE
CLASE 2 MÁXIMA
POTENCIA DE SALIDA:
LONGITUD DE ONDA
EMITIDA:
RAYON APPAREIL
LASER DE CLASSE 2
PUISSANCE DE
APPARECCHIO LASER
DI CLASSE 2 MASSIMA
POTENZA D'USCITA:
LUNGHEZZA D'ONDA
EMESSA:
AUSGANGSLEISTUNG: SORTIE:
WELLENLÄGE:
ENTSPR. EN 60825-1
(2001)
LONGUER D'ONDE
EMISE:
CONFORME A EN
60825-1 (2001)
CONFORME A EN
60825-1 (2001)
CONFORME A EN
60825-1 (2001)
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your terminal.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040
and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in exposure to hazardous
visible laser light.
WARNING
The product utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one
would with any very strong light source, such as the sun. Avoid allowing the laser beam
to hit the eye of an observer, even through reflective surfaces such as mirrors, etc.
vii
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e
si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo
o manutenzione.
L'utilizzo di procedure o regolazioni differenti da quelle descritte
nella documentazione può provocare un'esposizione pericolosa
a luce laser visibile.
ATTENZIONE
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni
riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di
fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità
intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un
osservatore, anche attraverso superfici riflettenti come gli specchi.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH
21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-
arbeiten zu öffnen.
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht
in dieser Betriebsanleitung beschreiben werden, können ein
gefährliches Laserlicht verursachen.
ACHTUNG
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den
Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du terminal.
viii
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
L'utilisation de procédures ou réglages différents de ceux donnés
ici peut entraîner une dangereuse exposition à lumière laser
visible.
ATTENTION
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le
rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi
de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces
réfléchissantes (miroirs, par exemple).
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones
de las autoridades internacionales y se refieren al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
La utilización de procedimientos o regulaciones diferentes de
aquellas describidas en la documentación puede causar una
exposición peligrosa a la luz láser visible.
ATENCIÓN
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos
humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el
rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por
ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un
observador, también a través de superficies reflectantes como los espejos.
The POWERSCAN® D8530 Hand-Held Reader is not user-
serviceable. Opening the case of the unit can cause internal
damage and will void the warranty.
CAUTION
ix
WEEE COMPLIANCE
Waste Electrical and Electronic Equipment (WEEE) Statement
English
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.scanning.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.scanning.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE),
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE)
erhalten Sie auf der Webseite www.scanning.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos
del equipo eléctrico
y
electrónico (WEEE), visite la página Web
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Eléctricos e
Eletrônicos (WEEE - Waste Electrical and Electronic Equipment), consultar o site
Chinese
有关处理废弃电气电子设备
(WEEE)的信息，
请参考Datalogic公司的网站：
Japanese
廃電気電子機器(ＷＥＥＥ)の処理についての関連事項はDatalogicのサイト
www.scanning.datalogic.com, をご参照下さい。
x
POWER SUPPLY
This device is intended to be supplied by a UL Listed or CSA Certified Power Unit
marked "Class 2" or "LPS" output rated 5-30 V, minimum 0.75 A which supplies
power directly to the scanner via the jack connector on the cable.
PATENTS
This product is covered by one or more of the following patents:
Design Pat.: AU 310201; AU 310202; CN 693980; HK 0602013.5M001; HK
0602013.5M002; JP 1305693; KR 30-0460940.
US Pat.: 6,478,226 B2; 6,512,218 B1; 6,808,114 B1; 6,877,664 B1; 6,997,385 B2;
7,053,954 B1; 7,102,116 B2; 7,282,688 B2.
European Pat.: 996,284 B1; 999,514 B1; 1,128,315 B1.
Additional patents pending.
xi
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website.
information including:
•
PRODUCTS
Search through the links to arrive at your product page where you can
download specific Manuals and Software & Utilities including:
- Datalogic Aladdin™ a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
•
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and
Technical Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues,
etc.
•
CONTACT US
Information Request Form and Sales & Service Network
xii
INTRODUCTION
1 INTRODUCTION
1.1 POWERSCAN® D8530 FAMILY DESCRIPTION
The PowerScan® D8530 Family Hand-Held Reader packs a lot of performance into
an attractive, rugged, hand-held device. It operates in commercial and industrial
environments as well as the front office.
Omni-directional
Operating
To read a symbol or capture an image, you simply aim the
reader and pull the trigger. Since PowerScan® D8530 Family
is a powerful omni-directional reader, the orientation of the
symbol is not important.
Decoding
And
Imaging
Thanks to powerful algorithms, PowerScan® D8530 reliably
decodes all major 1D (linear) barcodes, 2D stacked codes (such
as PDF417), 2D matrix symbols (such as DataMatrix), postal
codes (such as POSTNET, PLANET). The data stream —
acquired from decoding a symbol — is rapidly sent to the host.
The reader is immediately available to read another symbol.
PowerScan® D8530 can also function as a camera by
capturing images of labels, signatures, and other items.
FLASH MEMORY
Flash technology allows to upgrade the PowerScan® D8530
reader as new symbologies are supported or as improved
decoding algorithms become available.
1.2 PACKAGE CONTENTS
The following parts are included in the PowerScan® D8530 package contents:
• PowerScan® D8530 Hand-Held Reader
• CD-ROM containing the PowerScan® D8530 Configuration Tools software and
PowerScan® D8530 Reference Manual
• PowerScan® D8530 Quick Reference Manual
You may want to save your packing material in case you need to ship the reader at
some later time.
1
POWERSCAN® D8530
1.3 CONFIGURATION METHODS
1.3.1
Reading Configuration Codes
This manual can be used for complete setup and configuration. If you wish to change
the default settings, you can configure the PowerScan® D8530 reader by reading the
programming code symbols in this manual. Configuration commands and their
relative arguments are read individually using the symbols in this manual. See
Appendix D.
1.3.2
Using Datalogic Aladdin™
The Datalogic Aladdin™ program, available on the CD-ROM provided, allows
programming the reader by selecting configuration commands or printing them
through a user-friendly graphical interface running on the PC. These commands are
sent to the reader over the current communication interface; or they can be printed to
be read.
1.3.3
Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the RS-232 or
USB COM interface. This method is particularly useful when many devices need to
be configured with the same settings. Batch files containing the desired parameter
settings can be prepared to configure devices quickly and easily.
The PowerScan® D8330 reader incorporates a multi-standard interface, which can be
connected to a Host by plugging the correct interface cable into the connector and
closing the cable cover.
2
POWERSCAN® D8530
Follow the given procedure for correct cable insertion:
3
Align
2
5
1
6
Notch
4
7
Arrow
Tab
c Slip the cover over the cable.
d Push the plastic boot into the rubber gasket. Take care that the tab on the plastic
boot is aligned with the notch in the rubber gasket.
e Push the plastic boot and gasket into the handle. Ensure that the “Front” marking
on the plastic boot is facing out, with the arrow pointing towards the front of the
scanner.
f Insert the cable into the socket of the plastic boot.
g Insert the cable spacer into the cable wire and slide it towards the handle.
h Push the cover along the cable towards the reader, and hook it over the yellow
“tooth”.
i Insert the strain relief into the cover and tighten the screw to fix the whole
assembly to the reader handle.
4
USING POWERSCAN® D8530
2 USING POWERSCAN® D8530
2.1 AIMING SYSTEM
The PowerScan® D8530 reader uses an intelligent aiming system similar to those on
cameras. By partially pulling the trigger, the aiming system indicates a field of view to
be positioned over the code:
Figure 1 - Aiming System
When you pull the trigger completely a red beam illuminates the code. If the aiming
system is centered and the entire symbology is within the aiming system, you will get
a good read. The field of view changes size as you move the reader closer or farther
away from the code.
Linear barcode
2D Matrix symbol
Figure 2 - Relative Size and Location of Aiming System Pattern
5
POWERSCAN® D8530
The field of view indicated by the aiming system will be smaller when the
PowerScan® D8530 is closer to the code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer to the
the unit. (See chapter 8 for further details).
2.2 NORMAL OPERATION
PowerScan® D8530 normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger partially to enable the aiming
system. Then, pull it completely to capture and decode the image. The reader will
repeatedly flash until the symbol is decoded or timeout is reached. In between the
flashes of the reader, the aiming system keeps on showing the field of view on the
target (see Figure 2).
As you are reading code symbols, adjust the distance at which you are holding the
reader.
The PowerScan® D8530 hand-held reader aiming system is
designed for general reading and decoding of 1D and 2D symbols.
Some variation in reading distance will occur due to narrow bar width
and other factors.
NOTE
necessary to tilt the reader with respect to the barcode and/or set the
Camera Control parameters (see page 52).
NOTE
2.3 IMAGE CAPTURING
PowerScan® D8530 can also function as a camera by capturing images of labels,
signatures, and other items.
In order to capture an image, the user should read a Capture Image code (see
page 75), then point at the image subject and pull the trigger. This way, the image
will be captured and sent to the host PC. PowerScan® D8530 then returns to normal
operation. To capture another image you must read another Capture Image Code of
the same or a different Preset Configuration.
6
USING POWERSCAN® D8530
You can use the aiming system to position the reader from the object (ensure the
reader is about centered over the target). Adjust the distance at which you are
holding the reader (see Figure 2).
If the RS-232 interface has been selected, the image will be transferred to the host
PC via XMODEM_1K protocol.
Image capturing is not available in Wedge and USB Keyboard
Emulation interfaces and is not compatible with Autoscanning nor
when the Software trigger type is selected.
NOTE
Up to four different and independent Image Presets can be defined (see page 76).
2.3.1
Basic Configuration Parameters
The Image file formats supported are: TIFF, JPEG (default).
Two resolution options are available: Full Resolution (1280 x 1024 pixels) (default),
and Half Resolution (640 x 512 pixels). The lower resolution setting yields smaller file
sizes, so the transfer time decreases.
For JPEG images it is possible to define the Image Quality level to address tradeoff
between image file size and quality.
7
POWERSCAN® D8530
2.3.2
Advanced Configuration Parameters
By default, for all Image Presets, the window has its origin coordinates equal to zero,
its width equal to 1280 pixels and its height to 1024 pixels.
Brightness Adjustment is available in the range from –100% up to 100%, in steps of
1%. Positive values shift the luminance up so that the image will result brighter.
Default value is 0%, meaning that no brightness adjustment is performed.
The same range of values (–100% up to 100%, in steps of 1%) is available for
Contrast Adjustment. Positive values will increase the contrast, so that dark and
bright objects inside the image will be better distinguishable. Default value is 0%,
which means that no contrast adjustment is performed.
You can set the Image Color Depth by selecting 256 gray levels (default), 16 gray
levels, or 2 gray levels. Higher color depths yield larger image files. This option is
ignored if the JPEG format is selected,(256 gray levels only).
2.4 AUTOSCANNING
2.4.1
Normal Mode
PowerScan® D8530 provides an autoscan command (see page 73), which when
enabled, causes the reader to scan continuously and to monitor the central zone of
its reading area. In this way, PowerScan® D8530 is ready to capture any image
(containing a potential code) positioned on a uniform background.
The aiming system can be enabled to indicate the reading area of the potential code
to be captured. The illumination system can also be enabled when the ambient light
conditions are not sufficient to autodetect the potential code to be captured;
furthermore, the illumination system increases in intensity for an instant when
capturing and decoding an image. A safety time may be defined to prevent
PowerScan® D8530 from reading the same code repeatedly.
If the decoding is completed successfully, the reader starts monitoring the reading
area again. In case of decoding failure, PowerScan® D8530 keeps on decoding until
a potential code is present in the central zone of the reading area.
2.4.2
Pattern Mode
The Autoscan pattern mode is particularly advised when reading barcodes positioned
on a non-uniform background. In these cases PowerScan® D8530 may perceive
some elements of the background as barcodes and start the decoding. To avoid this
8
USING POWERSCAN® D8530
undesired effect, the Autoscan Pattern Code is placed in the PowerScan® D8530
reading area which prevents decoding. Using this code as the background, code
reading takes place normally by presenting desired codes to be read over the Pattern
Code. Between each code read, the Pattern Code must be presented to the reader.
The Pattern Code can be printed from the file of the manual (Appendix D) available
on the CD-ROM.
In case of low ambient light conditions, PowerScan® D8530 automatically activates
the illumination system. If desired, the illumination system can be enabled so that it is
always active.
2.5 CAMERA CONTROL
Exposure and Calibration
Three automatic control modes are available to get the best tuning of the image to be
captured:
-
the whole image. This mode works well in most standard applications. It is the
default setting.
-
Automatic based on central image: camera control mode based on the analysis
of a restricted area positioned in the central zone of the image. This mode is
suggested when reading small codes positioned in a dark and extensive
background.
-
Automatic for highly reflective surfaces: camera control mode allowing to read
codes on highly reflective surfaces. This mode is suggested, for example, when
reading codes positioned on plastic or metal surfaces.
Refer to page 52 for configuration codes.
9
POWERSCAN® D8530
2.6 DEFINING DATA FORMATTING
The string of a decoded code to be sent to the host may be formatted as follows:
•
•
defining simple data formatting (see page 42);
defining advanced data formatting giving complete flexibility in changing the
format of data (see par. 4.3).
When both simple and advanced data formatting are selected the info is processed in
the following order:
1. the string of the decoded code is processed according to the advanced
formatting rules;
2. the resulting string is processed according to the selection type rules of the
simple data formatting;
3. character substitution is performed on the resulting string;
4. character deletion is performed on the resulting string;
5. code concatenation is performed;
6. code ID is attached to the resulting string;
7. global headers and terminators are attached to the resulting string;
The codes to be sent to the host may also be selected or ordered depending on the
following two conditions:
•
•
one code per scan: PowerScan® D8530 sends the code being closest to the
image center. If the "Central Code Transmission" command is enabled, only the
code containing the image center will be transmitted (see page 72);
all codes per scan: the codes to be sent to the host may be ordered either by
length or by symbology starting from the code being closest to the image center
(see page 72). When enabling both these criteria, codes belonging to the same
symbology are sent to the host depending on their length.
10
USING POWERSCAN® D8530
2.6.1
Concatenation
It is possible to concatenate up to 4 different codes, set their length and enable the
intercode delay between them (the intercode delay is set in the specific interface
parameters, see page 27, 29 and 34). When enabling the delay one or more global
headers and terminators are added to the decoded data. The concatenation
procedure may occur in different ways depending on the number of codes to be
decoded per image:
One Code Per Scan
•
If the code resulting from the single decoding of an image belongs to one of the
code families to be concatenated, it is saved to the PowerScan® D8530 memory
waiting for other codes to complete the concatenation.
•
•
If the code belongs to the same family of a code previously saved, it overwrites
the old one.
If the code resulting from the decoding does not belong to one of the code
families to be concatenated, it causes the concatenation failure and clears the
temporary memory. If the "Concatenation Failure Transmission" command is set
to "Tx codes causing failure" (see page 50), this code will be sent in the output
message.
All Codes Per Scan
•
All codes resulting from the decoding of an image and belonging to one of the
families to be concatenated are saved to the PowerScan® D8530 memory
waiting for other codes to complete the concatenation.
•
•
If one or more codes resulting from the decoding belong to the same family of
codes previously saved, they overwrite the old ones.
When the image contains no code to be concatenated, the concatenation fails
and the reader temporary memory is cleared. If the "Concatenation Failure
Transmission" command is set to "Tx codes causing failure" (see page 50), the
codes causing the concatenation failure will be sent in the output message.
11
POWERSCAN® D8530
3 INITIAL SETUP
This procedure allows setting up the reader to operate with the default settings.
Whenever you need to change the default values refer to par. 4.2.
3.1 RS-232 INTERFACE SELECTION
The PowerScan® D8530 reader requires the RS-232 interface cable and the AC/DC
power adapter to be connected.
To install and configure your reader with the RS-232 interface, follow these
instructions:
Make all system connections as shown in Figure 3:
1.
2
1
3
Figure 3 - RS-232 Connection
Read the restore default parameter code below:
2.
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the RS-232 interface selection code:
3.
RS-232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
Power up your PC.
4.
RS-232 is the default interface set at the factory.
12
INITIAL SETUP
3.2 WEDGE INTERFACE SELECTION
The PowerScan® D8530 reader requires the Wedge interface cable and the AC/DC
power adapter to be connected.
To install and configure your reader with the Wedge interface, follow these
instructions:
Make all the PowerScan® D8530 reader connections as shown in Figure 4:
1.
1
2
Figure 4 – Reader Wedge Connections
Read the restore default parameter code below:
2.
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the Wedge IBM AT interface selection code:
3.
Wedge – IBM AT
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALFAEHKK
AEONPJCJGIIJCMCEHPLLHLPPJK
AIFBJLBGMHPLNPDFHGDGFIBDOK
AAPHBAJJCGCOPJDIMBCEANODDK
AFKFBPPJPJCAALOIKIECIPIKLK
DDLDLDLDDLDLLLLDDDDDDLDLDL
13
POWERSCAN® D8530
Make all PC system connections as shown in Figure 5:
4.
Figure 5 – PC Wedge Connection
Power up your PC.
5.
When not using the PowerScan® D8530 reader remember to
disconnect the Wedge interface from the PC before disconnecting
the power cord.
CAUTION
While using the PowerScan® D8530 it is always necessary to use
cables adopting an external power supply.
NOTE
3.3 USB INTERFACE SELECTION
The PowerScan® D8530 reader requires the USB interface cable and the AC/DC
power adapter to be connected.
The USB interface is compatible:
Windows 98 (and later)
Mac OS 8.0 (and later)
IBM POS for Windows
4690 Operating System
To install and configure your reader with one of the USB interfaces, follow these
instructions.
Make all the PowerScan® D8530 reader connections as shown in Figure 6;
1.
14
INITIAL SETUP
1
2
Figure 6 – Reader USB Connections
Read the restore default parameter code below:
Restore Default
2.
3.
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the desired USB interface selection code:
USB-COM EMULATION
USB-KBD EMULATION
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEAGEKK
AMONPJCJGIIJCMCFHLPMOOKNBK
AIFBJLBGMHPLMLAMDPIKFBLBOK
AAPHBAJICHGNBKOPLNBGLPAHFK
AHKFBNPHFKLEAOHGLPKOGDJLLK
DLDDLDLDDLDLLLLDDDLDDLDLDL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKEDBEKK
AMGNPJCJGIIJCMCFHMNJLBJPHK
AIFBJLBGMHPKNMBGMJOJEHHAOK
AAPHBAJICDHCJBCNKPCNNJNFHK
AFLFBMPJIKPAMFFBBHKCCKNIKK
DLLDLDLDLLDLLLLDDDDDDLDLLL
USB BULK
USB Generic HID
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFDDHKK
AEGNPJCJGIIJCMCEHIJOCEMNPK
AIFBJLBGMHPKMICPIAFFEONCOK
AAPHBAJJCCDBHCPKNDBPGLDBBK
AHLFBOPHCJGEMAMPAAEOMGMJKK
DDDDLDLDLLDLLLLDDDLDDLDLLL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEHCGKK
AEONPJCJGIIJCMCFGKKFBJILFK
AIFBJLBGMHPKNJGBENLDAOOCOK
AAPHBAJIDFFKKOLGFOOOMCFNDK
AELFBNNJFAOIIMAMCHHKGHCJJK
DDDDLDLDDLDLLLLDLLDDDLDLDL
Connect the USB cable to PC as shown in Figure 7. The PC automatically
recognizes the device and asks to install the device driver.
4.
Figure 7 – PC USB connection
15
POWERSCAN® D8530
Install the USB driver on your PC (the first time only) to complete the
connection.
5.
•
•
•
For USB Bulk the relevant files and drivers must be installed from the
CD-ROM. See the “DLBulkUSB User Guide” file provided on the CD-
ROM for more information.
For USB COM the relevant files and drivers must be installed from the
USB Device Installation software which can be downloaded from the web
site http://www.scanning.datalogic.com.
For USB Keyboard and for USB Generic HID the correct USB driver is
included in the Host Operating System and will either be loaded
automatically or will be suggested by the O.S. and should therefore be
selected from the dialog box.
The PowerScan® D8530 reader is a USB self-powered device.
NOTE
NOTE
If you need to change the USB device interface, after having
reconfigured the reader, you have to disconnect and reconnect the
cable to the PC.
16
CONFIGURATION USING CODE SYMBOLS
4 CONFIGURATION USING CODE SYMBOLS
This section describes the programming method of using configuration code symbols
to program your reader. By using the PowerScan® D8530 reader to read/decode
these special configuration symbols, you can configure, and obtain information from
its system software.
When you are reading configuration code symbols, carefully aim the PowerScan®
D8530 2D reader to avoid reading adjacent symbols.
The configuration code symbols in this chapter are divided into logical
sections according to the type of configuration required, (RS-232
configuration, Code selection, etc.). If arguments are required with a command,
you can read additional code labels (typically digits) from Appendix D.
To configure your reader:
1. Read the Enter Configuration code ONCE, available on top of each page.
code and selecting the value from the Hex/Numeric table (see Appendix D) or by
following the given procedures.
3. Read the Exit and Save Configuration code ONCE, available on top of each
page.
Example for step 3:
To set the maximum length of characters in a Code 39 barcode symbol that the
reader will decode to 32:
•
•
first read the Maximum Length symbol for Code 39 on page 56
then read the symbol for the digit "3" and lastly the symbol for the digit "2" in
Appendix D.
17
POWERSCAN® D8530
4.1 DEFAULT SETTINGS
Configuration Field
Default Setting
RS-232 Communication
Baud Rate
115200
Parity, Data Bits, Stop Bits
Handshake
ACK/NACK Protocol
FIFO
Intercharacter Delay
Intercode Delay
No parity; 8 Data bits; 1 Stop bit
None
None
Enabled
0
0
RX Timeout
10 seconds
Disabled
NUL
Serial Trigger Lock
Serial Trigger Lock Disable Character
Serial Trigger Lock Enable Character
NUL
USB COM Emulation
Handshake
None
ACK/NACK Protocol
FIFO
None
Enabled
Intercharacter Delay
Intercode Delay
RX Timeout
0
0
10 seconds
USB Keyboard Emulation
FIFO
Enabled
0
0
USA
Normal
Intercharacter Delay
Intercode Delay
*Keyboard Nationality
*Keyboard Speed
WEDGE-Communication
*Keyboard Nationality
CapsLock
CapsLock Auto-Recognition
NumLock
Intercharacter Delay
Intercode Delay
USA
OFF
ON
OFF
0
0
Data Format-Symbology Independent Parameters
Code Identifier
Custom Code Identifier
Code Length
*Header
Disabled
Disabled
Disabled
No headers
*Terminator
CR and LF terminators for RS-232, USB
BULK, USB COM, USB Generic HID
ENTER terminator for Wedge, USB Kbd
* The default values of these parameters are set when reading the interface selection.
18
CONFIGURATION USING CODE SYMBOLS
Configuration Field
Default Setting
Data Format-Symbology Dependent Parameters
Symbology Specific Format
Header Symbology
Select All
No headers
Terminator Symbology
No terminators
Symbology Character Substitution
Symbology Character Deletion
No character to substitute
No character to delete
Data Format-Concatenation
Concatenation
Disabled
Define Concatenation
2 EAN/UPC codes concatenated
000 = any length
000 = any length
000 = any length
000 = any length
Disabled
Set First Concatenated Code Length
Set Second Concatenated Code Length
Set Third Concatenated Code Length
Set Fourth Concatenated Code Length
Concatenation with Intercode Delay
Concatenation Timeout
10 seconds
Concatenation Failure Transmission
Transmission after Timeout
Tx codes causing failure
No code transmission
No code Identifier
Concatenation Result Code ID
Advanced Formatting
Format enable/disable
Disabled
Camera Control
Exposure Mode
Automatic, based on entire image
Power Save
Illumination Power
Max power
ON
Illumination System Power
Code Selection
Issue Identical Codes
Enabled
EAN/UPC
Selection
Enabled
Disabled
Disabled
Add-On
UPCE Expansion
Code 39
Selection
Enabled - no check digit
Code39 Full ASCII
Code Length Check
Minimum Length
Maximum Length
Start/Stop Character
Disabled
Disabled
001
255
Disabled
19
POWERSCAN® D8530
Configuration Field
Default Setting
Code 32
Selection
Disabled
Interleaved 2 of 5
Selection
Enabled - check digit control and tx
Code Length Check
Minimum Length
Maximum Length
Disabled
014
255
Codabar
Selection
Disabled
Disabled
001
Code Length Check
Minimum Length
Maximum Length
255
Code 128
Code128 Selection
Code Length Check
Minimum Length
Maximum Length
Enabled
Disabled
001
255
EAN 128
Selection
Disabled
Disabled
001
Code Length Check
Minimum Length
Maximum Length
255
Code 93
Selection
Disabled
Disabled
001
Code Length Check
Minimum Length
Maximum Length
255
PDF417
Selection
Option
Enabled
Macro PDF417 Buffered Mode
Disabled
Micro PDF417
GS1 DataBar™ Family
GS1 DataBar Expanded
GS1 DataBar Limited
Disabled
Disabled
Disabled
Disabled
Disabled
GS1 DataBar Omnidirectional
GS1 DataBar Expanded Stacked
GS1 DataBar Stacked
20
CONFIGURATION USING CODE SYMBOLS
Data Matrix
Selection
Enabled - normal & inverted
Rectangular Style
Minimum Code Length
Maximum Code Length
Enabled
0001
3600
QR
Selection
Enabled
Disabled
N Table
Postal Codes
Selection
Australian Table
Selection
Maxicode
Maxicode Mode 0
Maxicode Mode 1
Maxicode Mode 2
Maxicode Mode 3
Maxicode Mode 4
Maxicode Mode 5
Maxicode Mode 6
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Aztec
Selection
Disabled
Composite Codes
Selection
Disabled
Enabled
Discard Linear Part
Reading Parameters
Trigger Mode
Trigger level
Normal trigger
2 sec
Trigger Type
Flash ON
Flash OFF
2 sec
Beeper Tone
Tone 1
Beeper Volume
High volume
50 ms
Beeper Duration
Reads per Cycle
Scan Timeout
One read per cycle
5 sec
User Defined Beeper Tone
User Defined Beeper Volume
User Defined Beeper Duration
Codes per Scan
Tone 1
High Volume
100 ms
One code per scan
Enabled
Central Code Transmission
21
POWERSCAN® D8530
Reading Parameters (continued)
Order by Code Length
Order by Code Symbology
Autoscan Mode
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Autoscan Aiming System
Autoscan Hardware Trigger
Autoscan Illumination System
Safety Time
500 ms (if Autoscan mode or Software
trigger type is selected and the Multiple
Reads per Cycle option is enabled.
Image Formatting
Image Preset 1, 2, 3, 4
Image Format
Resolution
JPEG format
Full (1280 x 1024)
Set JPEG Quality Factor
Brightness
50
0%
Contrast
0%
Color Depth
256 gray levels
22
CONFIGURATION USING CODE SYMBOLS
4.2 CHANGING DEFAULT SETTINGS
Once the reader is setup, you can change the default parameters to meet your
application needs. Refer to the preceding paragraphs for initial configuration in order
to set the default values and select the interface for your application.
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function base on its reference group.
The RS-232, USB, WEDGE groups are for Standard Interface parameter
configuration.
The following parameter groups are common to all interface applications:
•
•
DATA FORMAT parameters regard the messages sent to the Host system.
CAMERA CONTROL parameters regard the control mode managing the
camera.
•
•
POWER SAVE parameters manage overall current consumption in the device.
CODE SELECTION parameters allow configuration of a personalized mix of
codes, code families and their options.
•
READING PARAMETERS control various operating modes and indicators
status functioning.
•
•
CAPTURE IMAGE parameters activate image capturing.
ADVANCED CAPTURE IMAGE parameters define options of the image to
capture.
•
ADVANCED DATA FORMAT parameters allow advanced formatting of
messages towards the Host.
Once the configuration is modified, it is possible to save it as a Custom Default
Configuration and to restore it at any time using a specific command.
SAVE CUSTOM DEFAULT
RESTORE CUSTOM DEFAULT
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBDGIK
AKCBPJCJGIIJCMCFHOOBOFKHJK
AEFBJLBGMHPLMLBENPIJOBOEGK
AAPHBAJICAELBENPOIFJGNJBHK
AGKFBJKCGEBMMAEBJHEAKDILKK
DDDDLDLLLLDLLLLDLDLDDLDLLL
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFGPNNEKBJPK
AEFBJLBGMHPLMMGACKPFEHFFGK
AAPHBAJIDDAMENHAAFBFAFPDBK
AHKFBMLLKCCKGKAEDCDMCKPKIK
DDDDLDLLLLDLLLLDDDLDDLDLLL
23
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232
RS-232 INTERFACE
BAUD RATE
1200 baud
2400 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCFGKKJKOJDJK
AEFBJLBGMHPLMKBDIAOJAOCFGK
AAPHBAJJDEBGGOGPJMMKGENDBK
AGKFAMOCFGFEOEMPKONGEDGLJK
DDDLLLLDDLLLLLLDLDLDDLDLDL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFFEFIK
AKCBPJCJGIIJCMCEHMOCCMGBNK
AEFBJLBGMHPKNKGHFCHBECLHGK
AAPHBAJICAFOGLINMDNLINCNFK
AFKFAPIBAPGEIJIHHJLGAGJLIK
DDDLLLLDDLLLLLLDDDLDDLDLDL
4800 baud
9600 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFBDEIK
AKCBPJCJGIIJCMCEGJKDEHBFLK
AEFBJLBGMHPLMOFOMLCDNGPGGK
AAPHBAJICAGAPEPJLLEPPMPNFK
AGLFAOPPDHDGCAJLOLBOAEPJJK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEEDGIK
AKCBPJCJGIIJCMCFHPOIMFOHPK
AEFBJLBGMHPKNOCKBJLLJKGEGK
AAPHBAJJDECIPBBLOEFOBFADBK
AFLFANJMGOAGENNDDMHOEBAJIK
DDLLLLLDDLLLLLLDLDDDDLDLLL
14400 baud
19200 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKECBFIK
AKCBPJCJGIIJCMCFGONEGKFJJK
AEFBJLBGMHPKNJFOOMMHDMNFGK
AAPHBAJJCHGPKILEAJBCHNGBHK
AELFAIIFKIDAOHJGJJACMIHIKK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFHBHIK
AKCBPJCJGIIJCMCEHIJPOIKLNK
AEFBJLBGMHPLMJCKDOFPHAEHGK
AAPHBAJIDDCHKNFGFGADJEJPDK
AHLFALOGPBAAIKNOEOGCINIILK
DDLLLLLDDLLLLLLDLDDDDLDLLL
38400 baud
57600 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEGAGIK
AKCBPJCJGIIJCMCEHJMNMHBHNK
AEFBJLBGMHPLMJEFHPOOLLEGGK
AAPHBAJJDEELFPOLNABGHGBJBK
AHKFAPKHDDAKGGJMLDOCGOJIJK
DLLLLLLDLLDLLLLDDLDDDLDLLL
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDAEIK
AKCBPJCJGIIJCMCFGPIGEFOFJK
AEFBJLBGMHPKNJDBKNHGPHNEGK
AAPHBAJICAADFKAJIPAHJPOHFK
AEKFAMMEGKDKALNEGEICCLGIIK
DLLLLLLDLLDLLLLDLLDDDLDLLL
115200 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFHOLKOKFLPK
AEFBJLBGMHPKNOEFFIAKFBGFGK
AAPHBAJIDDEEADKGGCELPHIFDK
AFKFAJNNKMAMKBJBMBPOKCBJKK
DLLLLLLDLLDLLLLDDLDDDLDLLL
24
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232
PARITY
None
Odd
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCFHKNICLPJPK
AEFBJLBGMHPKMKCBGHIFAIHGGK
AAPHBAJICBECCPIFDALHLEPDBK
AHKFAKNLOFKOENMPPBAEMFGLKK
DLLLLLLDDDLLLLLDDLLDDLDLDL
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCFGLOEIEEHJK
AEFBJLBGMHPKMNFFJCPJKOMHGK
AAPHBAJIDCAFHGCKNNPLNMJBHK
AGKFAPMCCDJIOHIKFEHIEMBKIK
DLLLLLLDDDLLLLLDLLLDDLDLDL
Even
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFEBFIK
AKCBPJCJGIIJCMCEHNKPAGLFNK
AEFBJLBGMHPLNNCBEAGBOCFFGK
AAPHBAJJCGENHDMIICOKDFGPDK
AFKFAMKBHKKIIKMCIDBIAJOKJK
DLLLLLLDDDLLLLLDDLLDDLDLDL
DATA BITS
7 Bits
8 Bits
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFGHFIK
AKCBPJCJGIIJCMCEHMNLNAOLPK
AEFBJLBGMHPLNNCDILOHNKLGGK
AAPHBAJICBAGNCCMNKDBECODFK
AFKFAMPJFJLIGJIGMPLCONMJKK
DLLLLLLDDDDLLLLDDLLDDLDLLL
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGNOHHPFFJK
AEFBJLBGMHPLNKFHHOJLHMAHGK
AAPHBAJIDCEBILIDDHHNCKIBDK
AEKFAJOAJPIOMDMDGKMOGELIIK
DLLLLLLDDDDLLLLDLLLDDLDLLL
STOP BITS
1 Bit
2 Bits
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEDHFIK
AKCBPJCJGIIJCMCFGPJNAPDJLK
AEFBJLBGMHPLNPBLKBBJJBCEGK
AAPHBAJIDBEGBLCBDNBOCGFFDK
AEKFAMNDDBAAALDFGLGGCILLKK
DDLLLLLDLLDLLLLDLLDDDLDLLL
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEFFGIK
AKCBPJCJGIIJCMCFHOKBKAIHNK
AEFBJLBGMHPLNIGPFEGFDHJFGK
AAPHBAJICCABECIONAFCEODHFK
AFKFAJMKPHDGKBHAMOBKKBMKIK
DDLLLLLDLLDLLLLDDLDDDLDLLL
ACK/NACK PROTOCOL
Disabled
Enabled
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCEGIPKHBNLJK
AEFBJLBGMHPLNPGMAAHBOHIFGK
AAPHBAJJDEDMBEFCELBBMOPPDK
AFLFAIPIECJKKHKLNFCCILOKJK
DDDLLLLDDLLLLLLDDDDDDLDLDL
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCEHJMGNOGFPK
AEFBJLBGMHPLNIBIPFANEBDEGK
AAPHBAJJCHHLENPNKGFNKGJNFK
AELFANOBIEKMANOOHAFOACJLLK
DDDLLLLDDLLLLLLDLDDDDLDLDL
See par. 5.1.1 for details.
25
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232
RX TIMEOUT
RX Timeout
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read
00-99, where:
00
a
number in the range
= disabled
01-99 = timeout from 1 to 99 secs
See par. 5.1.2 for details.
SERIAL TRIGGER LOCK
Disabled
Enabled
AODPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHCEIK
AKCBPJCJGIIJCMCEGPPNPFEFLK
AEFBJLBGMHPLNIHIDCFKGICHGK
AAPHBAJICFBGACOMKGOJHNKLFK
AEKFANPJPMFEGKBGFLJOMIIIIK
DLLLDLLDLDDLLLLDDDDDDLDLLL
AODPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBAHIK
AKCBPJCJGIIJCMCEHOMBFKPLNK
AEFBJLBGMHPLNPAMMHCGMOJGGK
AAPHBAJIDGFBFLEDELKFBFMJDK
AFKFAIOADKGCMAFDPOOCEBPJKK
DLLLDLLDLDDLLLLDLDDDDLDLLL
Serial Trigger Lock Characters
AODPBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALECBEIK
AKCBPJCJGIIJCMCEHPIIHPBDJK
AEFBJLBGMHPLNMDILLMPNGGGGK
AAPHBAJJCFDBCKNFCGKGNLLLHK
AHKFAMOAEIMMICHOFAFOONGIIK
DDDLDLLDLDLLLLLDLLDDDLDLDL
Read two characters for Serial Trigger Lock/Unlock.
The 2 characters must be read sequentially as Hex
values from the Hex/Numeric table.
Valid values are in the range 00-FF
HANDSHAKE
None
XON/XOFF
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFEBHIK
AKCBPJCJGIIJCMCFHLLMKOAJNK
AEFBJLBGMHPLNNFECKIPKMBHGK
AAPHBAJJCEHMNNFPKMDOKKEJFK
AELFAINCCKCCMFBIHBPGEOJIJK
DLDLLLLDLDLLLLLDLDLDDLDLDL
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFCDEIK
AKCBPJCJGIIJCMCFGKIAABLHLK
AEFBJLBGMHPLNKCANPPDAKKGGK
AAPHBAJJDHDLIEPAEBHCMCCLDK
AFLFANMLOMBEGPFNNEIKMHOJLK
DLDLLLLDLDLLLLLDDDLDDLDLDL
RTS/CTS
RTS Always On
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEHDGIK
AKCBPJCJGIIJCMCEHMMLIDEFPK
AEFBJLBGMHPKMKFEANGLEGDEGK
AAPHBAJICDHDIBBCBOGDCLNFHK
AGLFAOKILFCEACBFADOKICBJKK
DLDLLLLDLDLLLLLDLDLDDLDLDL
AODKGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEDEHIK
AKCBPJCJGIIJCMCEGJIKOIDBJK
AEFBJLBGMHPLNOGNJEDJNCHFGK
AAPHBAJICDENBOGGGGPHFKAFHK
AFKFAPNGINHGKLAJJBECIAHLLK
DLLLLLLDLDLLLLLDLDDDDLDLLL
26
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232
FIFO
Disabled
Enabled
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCFHKPBPDILLK
AEFBJLBGMHPLMKFOFBKAHDNHGK
AAPHBAJJDDHLEHJBMCFNGJDNHK
AGKFAILCKNMOEJCKPGAMODCKIK
DLDLLLLDLLDLLLLDLDDDDLDLLL
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCFGLMNFMDFNK
AEFBJLBGMHPLMNCKKENMNFGGGK
AAPHBAJJCADMBODOCPBBABFPBK
AHKFANKLGLPIODGPFDHAGKFLKK
DLDLLLLDLLDLLLLDDDDDDLDLLL
INTERCHARACTER DELAY
Intercharacter Delay
AODKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKJBHDDFLK
AEFBJLBGMHPLMMGPCMBDPGLGGK
AAPHBAJJCFEAMCCHGOKOBIIFDK
AEKFAMPBKKFKAJHKJGOMIIIJKK
DDLLLLLDDDDLLLLDDDLDDLDLLL
00
= disabled
01-99 = delay from 1 to 99 msec
INTERCODE DELAY
Intercode Delay
AODKBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDHGIK
AKCBPJCJGIIJCMCFHLNMCOLHNK
AEFBJLBGMHPLNLGFFHDMCJHGGK
AAPHBAJJDCEHFIOJAAMNNLPBBK
AGLFAMJBCNLGIFEIBBBGCFDLLK
DDLLLLLDDLLLLLLDDDDDDLDLDL
00
= disabled
01-99 = delay from 1 to 99 sec
27
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
USB
USB COM Emulation
HANDSHAKE
None
XON/XOFF
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBFIK
AKCBPJCJGIIJCMCEHONJKCAFPK
AEFBJLBGMHPKMMEGABIEOIJGGK
AAPHBAJICGEOOFKLJMHMGMPDFK
AGLFAJIKEDPOKPPMNLCCCFGIJK
DLLLLLLDDLDLLLLDDDLDDLDLLL
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDGIK
AKCBPJCJGIIJCMCEGPOFANLLJK
AEFBJLBGMHPKMLDCPEPIEOCHGK
AAPHBAJIDFAJLMAEHBDAAEJBDK
AHLFAMJDIFMIAFLJHOFOKMBJLK
DLLLLLLDDLDLLLLDLDLDDLDLLL
RTS/CTS
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEADEIK
AKCBPJCJGIIJCMCFHJKOIPEJNK
AEFBJLBGMHPLNLEGCGGAACLFGK
AAPHBAJJCBEBLJOGCOCBONGPHK
AELFAPPANMPIGIPBKJDOOJOJKK
DLLLLLLDDLDLLLLDDDLDDLDLLL
ACK/NACK PROTOCOL
Disabled
Enabled
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBFIK
AKCBPJCJGIIJCMCFGNJPHNNHLK
AEFBJLBGMHPKMOHOCLHKKDAEGK
AAPHBAJIDGAOCMKGHLFDAIEFDK
AHLFAJKACLEGMNEPHPPGOABKJK
DDLLLLLDLDDLLLLDLDDDDLDLLL
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADGIK
AKCBPJCJGIIJCMCFHMKDNCGJNK
AEFBJLBGMHPKMJAKNOAGAFLFGK
AAPHBAJICFEJHFAJJGBPGACHFK
AGLFAMLJONHAGHAKNKIKGJGLLK
DDLLLLLDLDDLLLLDDDDDDLDLLL
See par. 5.1.1 for details.
FIFO
Disabled
Enabled
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAEGIK
AKCBPJCJGIIJCMCEHPJEPPIHJK
AEFBJLBGMHPKNLEMHKKLDHFGGK
AAPHBAJIDBEJHPGFPCBPKPIHHK
AEKFAJOKMEBCCDMOFMNIIINKIK
DLLLLLLDDDLLLLLDDDDDDLDLDL
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGGFIK
AKCBPJCJGIIJCMCEGOKIFADJPK
AEFBJLBGMHPKNMDIIPNHJBOHGK
AAPHBAJICCAOCGMKBPFDMHOFBK
AFKFAMPDACCEIJILPJKEABKLKK
DLLLLLLDDDLLLLLDLDDDDLDLDL
28
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
INTERCHARACTER DELAY
Intercharacter Delay
AOALBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHCHIK
AKCBPJCJGIIJCMCEHPPEHPDJJK
AEFBJLBGMHPKNNHNAHBILCDHGK
AAPHBAJICHHCPKNDFOOMNODPDK
AGKFANKJMDIGGDJODMDIODHJKK
DDDLLLLDLLLLLLLDLDLDDLDLDL
00
= disabled
01-99 = delay from 1 to 99 msec
INTERCODE DELAY
Intercode Delay
AOALBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCEHOLJCCLLPK
AEFBJLBGMHPKMKHHHMDHGNPHGK
AAPHBAJIDAHFGABNDAIPBNELBK
AELFANMJEEGKOPKMLLMCEOMLLK
DDDLLLLDLDDLLLLDLDDDDLDLLL
00
= disabled
01-99 = delay from 1 to 99 sec
RX TIMEOUT
RX Timeout
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read
00-99, where:
00
a
number in the range
= disabled
01-99 = timeout from 1 to 99 secs
See par. 5.1.2 for details.
29
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
USB Keyboard Emulation
FIFO
Disabled
Enabled
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECDEIK
AKCBPJCJGIIJCMCEHJJOKGPNLK
AEFBJLBGMHPLMPBJKCBJCCEFGK
AAPHBAJICBGIEIKMBJAMEMFDFK
AHLFAJLKDIKCEOHGFFIACHKIKK
DDDLLDLDDDLLLLLDLDDDDLDLLL
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEBHIK
AKCBPJCJGIIJCMCEGIKCAJEDNK
AEFBJLBGMHPLMIGNFHGFIEPEGK
AAPHBAJIDCCPBBADPEEACEDBDK
AGLFAMKDPOJEOEDDPAPMKONJIK
DDDLLDLDDDLLLLLDDDDDDLDLLL
INTERCHARACTER DELAY
Intercharacter Delay
AOAPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGIKGHBCJPK
AEFBJLBGMHPLNMFDFAKDEDMEGK
AAPHBAJJDGEIPKFLPHCACJDHFK
AGKFAIMDALNGCKCMNJLKKPPKLK
DLLLLDLDDLLLLLLDDLLDDLDLLL
00
= disabled
01-99 = delay from 1 to 99 msec
INTERCODE DELAY
Intercode Delay
AOAPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBFHIK
AKCBPJCJGIIJCMCFHLOAKOPLLK
AEFBJLBGMHPLNOGLHKFNAIFGGK
AAPHBAJJCGAIDDFGBAAPENIBDK
AHKFAIOJGDGOEIJPHNGOGKIILK
DDLLLDLDLDLLLLLDLLDDDLDLLL
00
= disabled
01-99 = delay from 1 to 99 sec
30
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
KEYBOARD NATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian
English
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFFAHIK
AKCBPJCJGIIJCMCEHIJFLFPNPK
AEFBJLBGMHPLMLHCHGLKEBCFGK
AAPHBAJJDECOEEAFHDAPIFOFDK
AHLFAKJGEAHOKMOLCCDMAIBLKK
DDLLLDLDLDLLLLLDDDLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHDHIK
AKCBPJCJGIIJCMCFHOLALHANNK
AEFBJLBGMHPKNMBNBAOPGAAHGK
AAPHBAJJDEENOKPFEHEHOGPPDK
AFKFAIKNBNHCIHKEKNKACHIKLK
DLLLLDLDDDDLLLLDLLLDDLDLLL
French
German
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGEEIK
AKCBPJCJGIIJCMCEHNLKFOILPK
AEFBJLBGMHPKNIFAFLCFLINEGK
AAPHBAJICADLHAGDGAMCHONBHK
AFLFAKLAHMBAEDPAOIGIGABILK
DLDLLDLDDDDLLLLDDLDDDLDLDL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECDFIK
AKCBPJCJGIIJCMCEGIPLDFPPJK
AEFBJLBGMHPLMMGJMCHHCMJFGK
AAPHBAJICAAFOPBHBIFGAPABHK
AGKFALMOEEECOKOMHKMAGCHKKK
DLLLLDLDDDDLLLLDDLLDDLDLLL
Italian
Japanese
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFGLPBNMHJLK
AEFBJLBGMHPLMICEIJLNPEEGGK
AAPHBAJJDEHDHFIBDPNDJHCPDK
AGLFAJNDCFCACOLIDPAICFOIKK
DLDLLDLDDDDLLLLDLLDDDLDLDL
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEAAFIK
AKCBPJCJGIIJCMCFGONODHAPLK
AEFBJLBGMHPKNLAGKECCANLHGK
AAPHBAJICAGGEBOHCMBOGMBLHK
AELFAJPFBJEOMBKDPFFMENOLLK
DDLLLDLDLDLLLLLDLDLDDLDLLL
Spanish
Swedish
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEHJMHJKEBPK
AEFBJLBGMHPLMLBNDHALIKCEGK
AAPHBAJIDDECLGLIPFBKGHGDBK
AHKFAONHICHEEAKJNPLMOLALIK
DLLLLDLDDDDLLLLDLLLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFBBEIK
AKCBPJCJGIIJCMCFGPIMBILDLK
AEFBJLBGMHPKNLGJOFJDMGLGGK
AAPHBAJJCHAKLDFKKKALIOJNFK
AEKFANLENLEECNOBAINMKOPLJK
DLLLLDLDDDDLLLLDDLLDDLDLLL
USA
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFHKMNHDMHNK
AEFBJLBGMHPLMPFAHMMBFCPHGK
AAPHBAJJCHDECMCONCJPPPENFK
AHLFAMMKODBGIEPNJKHEKMJJIK
DLDLLDLDDDDLLLLDDLDDDLDLDL
31
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
KEYBOARD SPEED
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Normal
Fast
AOAPBPGMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCEGJIEPKNDJK
AEFBJLBGMHPLNNDGIDBCOOAEGK
AAPHBAJJDEHOFMOFDGMGKIAJFK
AFLFAJNANAPEGCNKPFNGOKFKLK
DDDLLDLDLDDLLLLDLDLDDLDLLL
AOAPBPHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGINGNFGPJK
AEFBJLBGMHPLNNFJMCKDCFAFGK
AAPHBAJIDDBCKOFILANDEKIPHK
AFKFANJBBCPOIOJIAIFGAJEKJK
DLDLLDLDDDLLLLLDDLLDDLDLLL
After setting the Keyboard Speed, it is necessary to disconnect and
reconnect the USB cable to the PC.
NOTE
See par. 5.2.1 for details.
32
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE
WEDGE INTERFACE
CAPS LOCK
Caps Lock Off
Caps Lock On
AOCOCOFOHNGNENEIEPANHOGOCK
AOCOCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHFIK
AKCBPJCJGIIJCMCFHPJMFONJPK
AEFBJLBGMHPKMPEAEFKPFEBEGK
AAPHBAJJDDHLCANDMPHCNCFDHK
AFLFALKFFFDCEGMMLKJKOLEKJK
DDLLLLLDLLDLLLLDLDLDDLDLDL
AHHPMBIMDKEOFMHMLJAKECFGIK
AKCBPJCJGIIJCMCFGOKAPBGHJK
AEFBJLBGMHPKMIDELANDPCKFGK
AAPHBAJJCADMHJHMCCDOLKDBBK
AELFAOLMJDAEOMIJBPOGGCDLLK
DDLLLLLDLLDLLLLDDDLDDLDLDL
CAPS LOCK AUTO-RECOGNITION
Disabled
Enabled
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHHGIK
AKCBPJCJGIIJCMCFGMIHHEGDPK
AEFBJLBGMHPKMNCOEGANBCAEGK
AAPHBAJICGHHLLJCDOLBAPHHBK
AGKFANMKJEKEKLMFDFKAEEPJIK
DLDLLLLDDDDLLLLDDLDDDLDLDL
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBFFIK
AKCBPJCJGIIJCMCFHNLLNLNNJK
AEFBJLBGMHPKMKFKLDHBLELFGK
AAPHBAJIDFDAOCDNNDPNGHBFHK
AHKFAINDFCJCABIAJANMMNIIKK
DLDLLLLDDDDLLLLDLLDDDLDLDL
Note: Caps lock manual configuration is ignored when Caps Lock Auto-Recognition is enabled
NUM LOCK
Num Lock Off
Num Lock On
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHFIK
AKCBPJCJGIIJCMCEGMNKIBALLK
AEFBJLBGMHPKMNHIGPFBBPIGGK
AAPHBAJJCDDLOJNOCIFNLGOFBK
AELFALIPDNIKCEHPBOEOCODIJK
DLLLLLLDDDDLLLLDDDDDDLDLDL
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFGIK
AKCBPJCJGIIJCMCEHNOGCOLFNK
AEFBJLBGMHPKMKAMJKCNLJDHGK
AAPHBAJJDAHMLAHBMFBBNOIHHK
AFLFAOJGPLLMIODKLLDCKHEJLK
DLLLLLLDDDDLLLLDLDDDDLDLDL
INTERCHARACTER DELAY
Intercharacter Delay
AOCKFPFODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFHMPCPODFNK
AEFBJLBGMHPKMJGOMPJIKMEFGK
AAPHBAJJCGFAJDKLLOPOKJGHDK
AFKFAMNDCADMEDKNDOGAGBBJIK
DDLLLLLDDDLLLLLDLDDDDLDLLL
00
= disabled
01-99 = delay from 1 to 99 msec
33
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE
INTERCODE DELAY
Intercode Delay
AOCKFPHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBBFIK
AKCBPJCJGIIJCMCFHNLPKDLHLK
AEFBJLBGMHPKNOGELELHHDIFGK
AAPHBAJJDBFHAJGFNAJNGKBDBK
AHLFAMLDKHNAMPJPLJJKMMKLJK
DDLLLLLDDLDLLLLDLDLDDLDLDL
00
= disabled
01-99 = delay from 1 to 99 sec
KEYBOARD NATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian
English
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHMIJMFGBLK
AEFBJLBGMHPKNMGIDEPLJIAGGK
AAPHBAJJDHGGNCDGAAIBGLIPDK
AHKFANJJHBLGOCOIIFCIOCHKKK
DLDLLLLDDDDLLLLDLLLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHKKMMHJBJK
AEFBJLBGMHPLMLAHFCKOLJCEGK
AAPHBAJJDHAFHMMGDEMJAIJFDK
AFLFAPKCCMLKMJKHAKLEMNOLLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
French
German
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCEHJKGCOBHLK
AEFBJLBGMHPLMPEKBJGEGBPHGK
AAPHBAJICDHDOGFABDEMJALLHK
AFKFANLPENNIANPDEPHMIKHJLK
DDLLLLLDLDLLLLLDLDDDDLDLLL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEAHGIK
AKCBPJCJGIIJCMCEGMOHEFGDNK
AEFBJLBGMHPKNLHDIADGPFLGGK
AAPHBAJICDENHJCEGLNIOBGLHK
AGLFAMMBHFIKKEOPNNNEIIBLKK
DDDLLLLDLDLLLLLDLDLDDLDLDL
Italian
Japanese
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBAFIK
AKCBPJCJGIIJCMCFGPONKMOFPK
AEFBJLBGMHPKNPDOMLPMCNGFGK
AAPHBAJJDHDLODLCEMFNHJEFDK
AGKFAONMBEOIGALLJIBMMPIJKK
DDLLLLLDLDLLLLLDDDDDDLDLLL
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGKMCEHJDPK
AEFBJLBGMHPLMMBMOGGDNEJEGK
AAPHBAJICDCONHNEFPJAICHBHK
AEKFAOPKCIIGIPKAFCEIKHIKLK
DLDLLLLDDDDLLLLDDLLDDLDLDL
Spanish
Swedish
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGFFIK
AKCBPJCJGIIJCMCEHNNLOKNNLK
AEFBJLBGMHPKNMAHHFEKFDAHGK
AAPHBAJIDAAKCAILIGJEIJAJBK
AHLFAJNILDLMAOKKHIKIABGKIK
DDDLLLLDLDLLLLLDDDLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGLJAGICPPK
AEFBJLBGMHPLMMHDKHNCBPJFGK
AAPHBAJJCEECCFGJNJIFGAPHFK
AELFAKLLOKIMGDOCKPMIEEJKJK
DDDLLLLDLDLLLLLDLDLDDLDLDL
34
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE
USA
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHCGIK
AKCBPJCJGIIJCMCFHONBADFLJK
AEFBJLBGMHPKNIEKDOIAILNEGK
AAPHBAJJCEHMLKBNKBBBBBCHFK
AHKFALMFNCNOMKPODNGAEGPIIK
DDLLLLLDLDLLLLLDLDDDDLDLLL
KEYBOARD SETTING
The values set by this procedure are not effected by the Restore Default code but will
be lost if the Interface Selection code is read.
Set Alphanumeric Keys
AOCOBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCFHKIFCIDNNK
AEFBJLBGMHPKNOEFDMIDAIKGGK
AAPHBAJJDBGBFEFKLAHODLCLBK
AELFAONNHNGEOMLLCMDAAFDLLK
DDLLLLLDLLLLLLLDDDLDDLDLLL
The reader can be used with terminals or PCs with various keyboard types and
nationalities through a simple keyboard setting procedure.
Keyboard setting consists of communicating to the reader how to send data
corresponding to the keyboard used in the application. The keys must be set in a
specific order.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during
normal use (refer to the manual of your PC or terminal for keyboard use). The exact
sequence must be indicated to the reader in this case pressing and releasing the
different keys.
Example:
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to
transmit the character "$" to the video, to set the "$", press and release "Shift" then
press and release "4".
Each pressed and released key must generate an acoustic signal on the reader,
otherwise repress the key. Never press more than one key at the same time, even if
this corresponds to the normal use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a
wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard
setting procedure. "SHIFT" must be repressed for each character and cannot
be substituted by "CAPS LOCK".
1. Read the "Set Alphanumeric Keys" code.
2. Press the keys shown in the following table according to their numerical order.
35
WEDGE
Some ASCII characters may be missing as this depends on the type of keyboard:
these are generally particular characters relative to the various national symbologies.
In this case:
•
•
•
The first 4 characters (Shift, Alt, Ctrl, and Backspace) can only be
substituted with keys not used, or substituted with each other.
Characters can be substituted with other single symbols (e.g. "SPACE") even if
not included in the barcode set used.
Characters can be substituted with others corresponding to your keyboard.
The reader signals the end of the procedure with 3 beeps indicating the keys
have been registered.
01 : Shift
02 : Alt
03 : Ctrl
04 : Backspace
05 : SPACE
06 : !
28 : 7
29 : 8
30 : 9
31 : :
51 : N
52 : O
53 : P
54 : Q
55 : R
56 : S
57 : T
07 : "
08 : #
09 : $
10 : %
11 : &
12 : '
32 : ;
33 : <
34 : =
35 : >
36 : ?
37 : @
38 : A
39 : B
40 : C
41 : D
42 : E
43 : F
44 : G
45 : H
46 : I
58 : U
59 : V
60 : W
61 : X
62 : Y
63 : Z
13 : (
14 : )
15 : *
16 : +
17 : ,
18 : -
64 : [
19 : .
65 : \
20 : /
66 : ]
21 : 0
22 : 1
23 : 2
24 : 3
25 : 4
26 : 5
27 : 6
67 : ^
68 : _ (underscore)
69 : `
47 : J
48 : K
49 : L
50 : M
70 : {
71 : |
72 : }
73 : ~
74 : DEL
36
WEDGE
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1. Enter keyboard setup
2. Exit keyboard setup
3. SHIFT, ALT, CTRL, BACKSPACE keys
4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key
pressed simultaneously.
Example
The transmission of the "%" character implies two different steps:
1. Press the SHIFT key
2. Press the "5" key
The different tones produced by the reader indicate that both steps have been
successful and that the character has been transmitted.
37
WEDGE
EXTENDED HEADER/TERMINATOR KEYS
For the WEDGE interface, the following extended keyboard values can also be
configured.
These values are restored through the Interface Selection code and not Restore
Default.
EXTENDED KEYBOARD TO HEX CONVERSION
IBM AT
HEX
KEY
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
9B
ENTER
TAB
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
HOME
END
PG UP
PG DOWN
↑
↓
←
→
ESC
CTRL (Right)
Euro
38
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE
SET CUSTOM EXTENDED HEADER/TERMINATOR KEYS
Set Extended Keys
AOCOBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHEIK
AKCBPJCJGIIJCMCEGJMDPHOPJK
AEFBJLBGMHPKNMHNBGHNEDDEGK
AAPHBAJJCBCBJNFHFHFBFPJNHK
AFLFAOPHBFNMIOAIIIOEMAEJLK
DLLLLLLDDDLLLLLDLDDDDLDLLL
The extended Header/Terminator keys for Wedge Interface users can be
customized by defining them through a simple keyboard setting procedure.
For example, the Numeric Keypad keys can be set for use as Headers or
Terminators by substituting the default extended keys during this procedure.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during
normal use (refer to the manual of your PC or terminal for keyboard use). The exact
sequence must be indicated to the reader in this case pressing and releasing the
different keys.
Example:
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to
transmit the character "$" to the video, to set the "$", press and release "Shift" then
press and release "4".
Each pressed and released key must generate an acoustic signal on the reader,
otherwise repress the key. Never press more than one key at the same time, even if
this corresponds to the normal use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a
wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard
setting procedure. "SHIFT" must be repressed for each character and cannot
be substituted by "CAPS LOCK".
1.
2.
3.
Read the "Set Extended Keys" code.
Press the first 4 keys indicated in the following table.
Define all keys from 5 to 28 in the following table.
39
WEDGE
If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your
keyboard, you can only substitute them with keys not used, or substitute them
with each other.
The reader signals the end of the procedure with 3 beeps indicating the keys
have been registered.
CUSTOM EXTENDED KEYBOARD SETTING TABLE
Custom
Order
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
HEX
-
KEY
Shift
-
Alt
-
Ctrl
-
Backspace
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
40
WEDGE
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1.
2.
3.
4.
Enter keyboard setup
Exit keyboard setup
SHIFT, ALT, CTRL, BACKSPACE keys
Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key
pressed simultaneously.
Example
The transmission of the "%" character implies two different steps:
1.
2.
Press the SHIFT key
Press the "5" key
The different tones produced by the reader indicate that both steps have been
successful and that the character has been transmitted.
41
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
DATA FORMAT
The Data Format parameters can be restored to their default values using the
following methods:
1) the general “Restore Default” code restores all the configuration parameter
groups including Data Format to their default values, with the exception of the
Symbology Independent Header and Terminator selections;
2) the “Data Format Default” code restores all the Data Format configuration
parameters to their default values, with the exception of the Symbology
Independent Header and Terminator selections;
3) the Symbology Independent Header and Terminator parameters are set to their
default values when reading the interface selection code;
4) the “Symbology Specific Format Default” code restores only the configuration
parameters of the specific symbology indicated by the Code Identifier code in
Appendix C.
DATA FORMAT DEFAULT
Data Format Default
AOCPBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGAFIK
AKCBPJCJGIIJCMCEHJKCFFCHPK
AEFBJLBGMHPKMNAJGLEGHEGGGK
AAPHBAJJCHEKKKMBGNHELADBDK
AEKFAPJMLGFOAIOEJLKOMMCJLK
DDDLDDLLLLLLLLLDDDLDDLDLDL
Symbology Independent Parameters
CODE IDENTIFIER
Disabled
Custom Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFAFIK
AKCBPJCJGIIJCMCFGNOPBGHPJK
AEFBJLBGMHPKNIGPNAEBNHLEGK
AAPHBAJICGHAMCNFBEFLHEFBDK
AHLFAOKCHHDGGGHMMLMEENPIKK
DLDLLLLDDLLLLLLDDLDDDLDLLL
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDCGIK
AKCBPJCJGIIJCMCFHMNDLJMBPK
AEFBJLBGMHPKNPBLCFDNHBAFGK
AAPHBAJIDFDHJLHKPJBHBMDDFK
AGLFALLLLBAAMMDJGOLIMEIJIK
DLDLLLLDDLLLLLLDLLDDDLDLLL
42
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
AIM Standard Code ID
Datalogic Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEGCEIK
AKCBPJCJGIIJCMCEGKJIDLDDLK
AEFBJLBGMHPLMPGPPHKFDNJHGK
AAPHBAJJCBHPJOJIKGAGPFMNBK
AFLFAINIOIDAKBHBLJNIIBHJJK
DLDLLLLDDLLLLLLDDLDDDLDLLL
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKECFFIK
AKCBPJCJGIIJCMCEHPNJFAEHNK
AEFBJLBGMHPKNLFGGOPHKJNGGK
AAPHBAJJCBEBABOMNOJCIEBNBK
AGKFAJKGNAGCAIGNCLHAIDBLIK
DLLLLLLDDLLLLLLDDLLDDLDLDL
CUSTOM CODE IDENTIFIER
Custom Code Identifier
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCFGJLLDNBJNK
AEFBJLBGMHPKNOGANCECFEMGGK
AAPHBAJIDDGNCMJCAFDEFOFNHK
AEKFALLKNIIMEADJNKJEAODLJK
DLDLLLLDDDLLLLLDLLLDDLDLLL
1. Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-3, where
0
=
Code ID
disabled.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range
00-7F.
CODE LENGTH
Disabled
Enabled
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGCGIK
AKCBPJCJGIIJCMCFGMILJDIPLK
AEFBJLBGMHPLMPBKJNELHDNFGK
AAPHBAJJCDEODAAPIINCGKOLHK
AEKFAMKLLILKOOKLELDGMGALJK
DLLLLLLDLLLLLLLDLDDDDLDLLL
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHNLHDMDBNK
AEFBJLBGMHPLMIGOGIDHNFGEGK
AAPHBAJJDAAJGJKAGFJOACIJBK
AFKFAJLCHOIMEEOOOOEKEPHKLK
DLLLLLLDLLLLLLLDDDDDDLDLLL
SET HEADERS
Set Headers
AOCLFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCFGINPLIOJPK
AEFBJLBGMHPLMJBFJPEIPAKHGK
AAPHBAJJDGFDNOEIJJLNEAOHDK
AHLFAJLDBHAAMIOOFKGGIFMIKK
DLLLLLLDLDLLLLLDDDLDDLDLLL
1. Set the number of characters
in the range 00-10.
2. Read
the
corresponding
characters as Hex values from
the Hex/Numeric table. Valid
values are in the range:
00-7F for RS-232, USB BULK,
USB COM, USB Generic HID
00-9B for Wedge and USB
Keyboard
3. Read the following code to
enable the configuration you
have set.
43
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
HEADERS
Disabled
Enabled
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBEEIK
AKCBPJCJGIIJCMCFHIKKDCLPNK
AEFBJLBGMHPLMNFFBGNNEOOGGK
AAPHBAJIDGHEPGHBBJPCOGPHBK
AELFAIKKKDJICAIGFBKGKACIKK
DDDLLLLDLDDLLLLDLLLDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHGHIK
AKCBPJCJGIIJCMCFGJJGJNABLK
AEFBJLBGMHPLMKCBODKBOIFHGK
AAPHBAJICFDDKPNOPELOIOJFHK
AFLFANLDGFKOIKMDPENKCJFJIK
DDDLLLLDLDDLLLLDDLLDDLDLDL
SET TERMINATORS
Set Terminators
AOCLBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGKMBDAFBPK
AEFBJLBGMHPLNOFGDKLPFPNFGK
AAPHBAJICHAICAAEDMENDAINBK
AFKFAMKDELFIIOFHBCGIKDELJK
DDLLLLLDLLLLLLLDLLDDDLDLLL
1. Set the number of characters
in the range 00-10.
2. Read
the
corresponding
characters as Hex values from
the Hex/Numeric table. Valid
values are in the range:
00-7F for RS-232, USB BULK,
USB COM, USB Generic HID
00-9B for Wedge and USB
Keyboard
3. Read the following code to
enable the configuration you
have set.
TERMINATORS
Disabled
Enabled
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFEGIK
AKCBPJCJGIIJCMCEHKLELKAHNK
AEFBJLBGMHPLNKBGLDCKOBJEGK
AAPHBAJJCHCPAIDNLMACJGJNDK
AGKFANLKPPMAGGDPBJKIIGKLJK
DLDLLLLDLLDLLLLDDDDDDLDLDL
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDGFIK
AKCBPJCJGIIJCMCEGLIIBFLJLK
AEFBJLBGMHPLNNGCEGFGEHCFGK
AAPHBAJJDEGIFBJCFBEOPOPPFK
AHKFAIKDDJPGMMHKLMNEAPNKLK
DLDLLLLDLLDLLLLDLDDDDLDLDL
44
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
Symbology Dependent Parameters
The “Symbology Specific Format Default” code on page 48 allows restoring the
symbology dependent parameters related to a specific code family to the default
values.
SYMBOLOGY SPECIFIC FORMAT
Symbology Specific Format
AOCLCIHOFNGNENEIEPANHOGOCK
1. Select
a
Datalogic Standard Code
AHPNIBAMDKEOFMHMLJAKEGHGIK
AKCBPJCJGIIJCMCFHLNMJCGPLK
AEFBJLBGMHPLMMGPEPDOAPMGGK
AAPHBAJJDCFMDNCMBONAPKCNHK
AGKFALICLLGKIBEJGFOCKENJLK
DLLLLLDLLLDLLLLDDLDDDLDLLL
Identifier from the Code Identifier
Table in Appendix C.
2. Formatting:
= select all - Stop
0
1
2
3
= select right - followed by Step 3
= select left - followed by Step 3
= select middle - followed by a
number in the range 000-999
for the starting character and
then, by Step 3
= discard right - followed by Step 3
4
5
6
= discard left - followed by Step 3
= discard middle - followed by a
number in the range 000-999
for the starting character and
then, by Step 3
3. Set the number of characters to
select/discard in the range 000-999.
SYMBOLOGY HEADERS
Symbology Headers
AOCPFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEGEIK
AKCBPJCJGIIJCMCEGJLCJPHBPK
AEFBJLBGMHPKNNDHOGJCJDBFGK
AAPHBAJICDAIOGPCAEKBELJJBK
AFLFANMIJICKAJMIONHKIJOLLK
DDLLLDLDDDDLLLLDDLLDDLDLLL
1. Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-5.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range:
00-7F for RS-232, USB BULK, USB
COM, USB Generic HID
00-9B for Wedge and USB Keyboard
4. Read the following code to enable the
configuration you have set.
45
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
HEADERS
Headers
AOCPFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBGEIK
AKCBPJCJGIIJCMCFHKPEEAKDLK
AEFBJLBGMHPKNPAPMMGMNIIHGK
AAPHBAJIDDEICPPPODIOCPCPHK
AELFANOCPAJCGLHLEJKOEMJJLK
DLLLLDLDLLDLLLLDLLDDDLDLLL
1.
2.
Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
0 = disabled
1 = enabled
SYMBOLOGY TERMINATORS
Symbology Terminators
AOCPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGAGIK
AKCBPJCJGIIJCMCFGONFOBJDNK
AEFBJLBGMHPKNNEAEHPKOFLEGK
AAPHBAJJCGHCOJIBHCKOKDDDBK
AEKFAJODOLLAKFFGFDDOCKLKIK
DDDLLDLDLDLLLLLDLDLDDLDLDL
1. Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Set the number of characters in the
range 0-5.
3. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range:
00-7F for RS-232, USB BULK, USB
COM, USB Generic HID
00-9B for Wedge and USB Keyboard
4. Read the following code to enable the
configuration you have set.
TERMINATORS
Terminators
AOCPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEDAGIK
AKCBPJCJGIIJCMCEHNJDDOEBJK
AEFBJLBGMHPKNPHIGNAEKOCGGK
AAPHBAJJDGDCCAIMJFIBMHIFHK
AFKFAJMJIDAIMHOFPHOKOPMIIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
46
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
SYMBOLOGY CHARACTER SUBSTITUTION
Symbology Character
Substitution
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGLKMBHMJPK
AEFBJLBGMHPKMKHEEDGFDMGHGK
AAPHBAJJDCFDBILOKBFBDLPDDK
AHKFAINIMEHCEPHBKFHEKPGIIK
DLLLLDLDDLDLLLLDLDDDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Read the corresponding character
as Hex value from the Hex/Numeric
table which identifies the character
to be substituted. Valid value is in
the range 00-7F.
3. Read the corresponding character
as Hex value from the Hex/Numeric
table which identifies the new
substituting character. Valid value is
in the range 00-7F.
4. Read the following code to enable
the configuration you have set.
CHARACTER SUBSTITUTION
Character Substitution
AOCPBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCEHIOKMIBLLK
AEFBJLBGMHPKMIEMGJJLHHPFGK
AAPHBAJJCCBDNBLDEGHOFPEFFK
AGKFAIPCKMMKCNMCABKAGKBKIK
DDLLLDLDLDDLLLLDDDLDDLDLLL
1. Select a Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
SYMBOLOGY CHARACTER DELETION
Symbology Character Deletion
AOCLFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGNKPOMNLPK
AEFBJLBGMHPLNNHGKPAHOOKHGK
AAPHBAJJDCBHOFBHELNHMNODHK
AFKFAOPKHIGEGLDIJLMCIHMKIK
DLLLLDLDDLLLLLLDLDDDDLDLDL
1. Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. Read the corresponding character as
Hex value from the Hex/Numeric table
which identifies the character to be
deleted.
Valid value is in the range 00-7F.
3. Read the following code to enable the
configuration you have set.
47
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
CHARACTER DELETION
Character Deletion
AOCLFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFECHIK
AKCBPJCJGIIJCMCFHOOJDDAJLK
AEFBJLBGMHPLNPEOIFPJKFDFGK
AAPHBAJJCCFHCMBKKMPIKJFFBK
AEKFAONABANMAJILDPBGECLIIK
DDLLLDLDLDLLLLLDDDLDDLDLDL
1. Select
a
Datalogic Standard Code
Identifier from the Code Identifier
Table in Appendix C.
2. 0 = disabled
1 = enabled
SYMBOLOGY SPECIFIC FORMAT DEFAULT
Symbology Specific Format
Default
AOCPBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCEHOIKHBLJNK
AEFBJLBGMHPKMMHNPMDEIGJGGK
AAPHBAJICDAGPDAKALKOINIBHK
AFKFANJCEPAAEBCDGCFGONPKKK
DLDLDDLLDDDLLLLDDLLDDLDLLL
Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
Concatenation
DEFINE CONCATENATION
Define Concatenation
AOCLBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFACFIK
AKCBPJCJGIIJCMCEHMPHLLLBLK
AEFBJLBGMHPLMIANCAAOAKEHGK
AAPHBAJIDDAMNCFGAJAINJDPDK
AGLFALMAEMIEEPDCHHBIGEDLLK
DLLLLDLDLLLLLLLDLLDDDLDLDL
1. Select the number of codes to
concatenate in the range 2-4.
2. Select the Datalogic Standard Code
Identifier for each code to concatenate
(repeat for same code types) from the
table in Appendix C.
3. Read the following Code to enable the
configuration you have set.
CONCATENATION ENABLE/DISABLE
Disabled
Enabled
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFBFIK
AKCBPJCJGIIJCMCEGMICDBOHJK
AEFBJLBGMHPLMMENKJJLLEAGGK
AAPHBAJJDDCLPKGPIJEHHPCPBK
AFLFAKNJPIBMKHFKHMNIEBNLLK
DDDLLDLDLLDLLLLDDDDDDLDLLL
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDDGIK
AKCBPJCJGIIJCMCEHNLOJOFJPK
AEFBJLBGMHPLMLDJFMOHBCLHGK
AAPHBAJJCAGMKDMAGEALBHENHK
AELFAPMADOCKANBPNJKEMIKKJK
DDDLLDLDLLDLLLLDLDDDDLDLLL
48
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
Concatenation Options
FIRST CONCATENATED CODE LENGTH
Set First Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEABHIK
AKCBPJCJGIIJCMCFHLKPMKFPLK
AEFBJLBGMHPKNNGOKPMDEJKEGK
AAPHBAJICEFCFKJNIILEINNFHK
AELFAJICKBNGEDLFILEAAIELKK
DLDLLDLDLDLLLLLDDLDDDLDLDL
Read the number in the range
000-255.
000 = any code length
SECOND CONCATENATED CODE LENGTH
Set Second Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFBFIK
AKCBPJCJGIIJCMCEGNOEEIKNPK
AEFBJLBGMHPLMNBKHNFLAFDGGK
AAPHBAJJDABKFPHPNHKFGECLDK
AHLFAKOBPIOGCOPNFMCAENLLLK
DLDLLDLDLDLLLLLDLLDDDLDLDL
Read the number in the range
000-255.
000 = any code length
THIRD CONCATENATED CODE LENGTH
Set Third Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBGEIK
AKCBPJCJGIIJCMCEHIKFCDNJJK
AEFBJLBGMHPKNJCDOEAJJBHHGK
AAPHBAJJDACEMAALKPDBBFPLDK
AEKFALJPMALEIHOBMOIIEPNJKK
DLLLLDLDLDLLLLLDLLLDDLDLLL
Read the number in the range
000-255.
000 = any code length
FOURTH CONCATENATED CODE LENGTH
Set Fourth Concatenated Code
Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGOOOKBCLNK
AEFBJLBGMHPLMJFHDGJBNNOFGK
AAPHBAJICEGMMFOJPACAPMAFHK
AHKFAIPMJJIEOKKJBJOIAKCJLK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Read the number in the range
000-255.
000 = any code length
49
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
CONCATENATION WITH INTERCODE DELAY
Disabled
Enabled
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGKOHEIPLNK
AEFBJLBGMHPLNKDDEFMGJJDGGK
AAPHBAJICAGADJGKIBPOIBOLHK
AGKFAILHIGKOGCKPACNKMNLKLK
DLDLLDLDDLDLLLLDDLLDDLDLLL
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGGEIK
AKCBPJCJGIIJCMCEHLNLOHEFLK
AEFBJLBGMHPLNNEHLALKDPIHGK
AAPHBAJIDDCHGAMFGMLCOJIJBK
AHKFANKOEAJIMIOKKHKGEEMLJK
DLDLLDLDDLDLLLLDLLLDDLDLLL
This parameter is enabled with
concatenation activated (see par.
2.6.1 for details).
CONCATENATION FAILURE TRANSMISSION
TX Codes Causing Failure
No Code TX
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDDEIK
AKCBPJCJGIIJCMCEHJNFLKDDJK
AEFBJLBGMHPKNICCHAEBKEIHGK
AAPHBAJICHFFMKDPICNHIBABHK
AELFAMLBAPFIILEDIKOIEEEIIK
DDDLLDLDDLLLLLLDDLLDDLDLDL
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFBHIK
AKCBPJCJGIIJCMCEGIOJBFINPK
AEFBJLBGMHPKNPFGIFDNACDGGK
AAPHBAJIDEBCJDJAGPJLOJGDBK
AFLFAJKIMJGOCBAGCPJEMNDJKK
DDDLLDLDDLLLLLLDLLLDDLDLDL
See par. 2.6.1 for details
CONCATENATION TIMEOUT
Concatenation Timeout
AOCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGHGIK
AKCBPJCJGIIJCMCFGOPMDJOBJK
AEFBJLBGMHPLNNDPHBNPJOBFGK
AAPHBAJIDEELIBJFIAEEHOPNHK
AFKFALIKKDNAKBLDFEDGAMPLKK
DDLLLDLDDLDLLLLDDLDDDLDLLL
05-99 = timeout from 5 to 99
seconds.
TRANSMISSION AFTER TIMEOUT
No Code Transmission
First Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFHOIJLDLHLK
AEFBJLBGMHPLNJHPPIEKCAFEGK
AAPHBAJJDEGMKJKMAAALNIONFK
AGKFAKJDBHEIEJNLFPPGCJBLKK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFGPLFBMAJNK
AEFBJLBGMHPLNOALANDGIGOFGK
AAPHBAJJCHCLPAADONEHLAIPDK
AHKFAPIKNBHOODJOPKIKKAGKIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
Second Code Transmission
Third Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEAGHIK
AKCBPJCJGIIJCMCEHJPOJOPLJK
AEFBJLBGMHPKMOHPNPKOMKHHGK
AAPHBAJIDDGDPFOBLCFGFJHBHK
AEKFAMOJIIEOIONGCNOKOFJKJK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEGMLPPFIPPK
AEFBJLBGMHPLNKEGEGPMFODGGK
AAPHBAJIDDFNGKJFMKMCCIKBHK
AHLFANJHLABMCHMKLPECOHPIIK
DLLLLDLDDLLLLLLDLDLDDLDLLL
50
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
CONCATENATION RESULT CODE ID
No Code Identifier
Use First Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFEHIK
AKCBPJCJGIIJCMCFHJKBJHCJJK
AEFBJLBGMHPLNIALGPDINCKEGK
AAPHBAJIDACAPAGHGGNBOFFNBK
AHKFAIJNOOBGAABMKGAOAIMILK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDGEIK
AKCBPJCJGIIJCMCFGIJNDIJHPK
AEFBJLBGMHPLNPHPJKEEHEBFGK
AAPHBAJICDGHKJMIILJNINDPHK
AGKFANIECICAKKFJADHCIBLJJK
DDDLLDLDLDDLLLLDDLDDDLDLLL
Use Second Code Identifier
Use Third Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGGGIK
AKCBPJCJGIIJCMCEHONGLKGFLK
AEFBJLBGMHPKMPALEINMDIIHGK
AAPHBAJJDHCPKMCKNEIMGEMBDK
AFKFAOOHHBBAMHBBNEBCMEEJIK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFCBHIK
AKCBPJCJGIIJCMCEGLJHNBBBNK
AEFBJLBGMHPLNLDCNBIOKMMGGK
AAPHBAJJDHBBDDFOKMBIBFBBDK
AGLFAPJJEJECGOANEGLKMGCLJK
DDLLLDLDLDDLLLLDLLLDDLDLDL
Use Fourth Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFHNNMFDODJK
AEFBJLBGMHPKMLEGADBGOAFEGK
AAPHBAJICDFJDGLMPDAJPMOPHK
AFLFAMPKBAHCADEFJBNKIDNLIK
DDLLLDLDLDDLLLLDDLLDDLDLDL
51
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CAMERA
CONTROL
CAMERA CONTROL
EXPOSURE MODE
Automatic
(Entire Image)
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGCEIK
AKCBPJCJGIIJCMCEGMJHKBKNNK
AEFBJLBGMHPLNPAICDABCGHGGK
AAPHBAJJCDFOOPCEHFCEBHJFFK
AHKFAJMFIHDMKONFFAOAGCPJKK
DLDLLLLDDLLLLLLDDDLDDLDLLL
Automatic for Highly
Automatic (Central Part of Image)
Reflective Surfaces
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFDCGIK
AKCBPJCJGIIJCMCFHKNMCDFPJK
AEFBJLBGMHPKMPHMPBJJGKOEGK
AAPHBAJIDHBGOKMGCKDFPOGLBK
AEKFAKKGNOAMMDJNIHIACHAJLK
DLDLLLLDDLLLLLLDLDLDDLDLLL
AOCKCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFHFHIK
AKCBPJCJGIIJCMCFGPJNEICLPK
AEFBJLBGMHPLNLEFGIMLPOKFGK
AAPHBAJIDHCIHFLCFCKBIPLLBK
AHLFALNIOGFOGKIBBFCICFGLKK
DLLLLLLDDLLLLLLDLDDDDLDLDL
See par. 2.5 for details.
52
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
POWER SAVE
POWER SAVE
ILLUMINATION SYSTEM POWER
Illumination System OFF
Illumination System ON
APDMCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCFGOLCIKNHNK
AEFBJLBGMHPLNPBMDCLPNODEGK
AAPHBAJJCDDHDGLDACHDFPBJHK
AHKFAPPBFGDECMMLAKHGKLBJLK
DDDLLLLDDLDLLLLDDDLDDLDLLL
APDMCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCFHPIOCFGJLK
AEFBJLBGMHPLNIGIMHMDHIIFGK
AAPHBAJJDAHAGPBMOPDPDHHLBK
AGKFAKOIJAACIGIOKPAKCCGIJK
DDDLLLLDDLDLLLLDLDLDDLDLLL
53
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODE SELECTION
Disable All Symbologies
Disable All Linear Symbologies
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHEHIK
AKCBPJCJGIIJCMCEHPIFJNCLPK
AEFBJLBGMHPKNPEHGMLHNABFGK
AAPHBAJICFBOAJJGCKPDGADNBK
AEKFAPJAJPBAEIBFNOAIKGGIKK
DLDLDDLDDDLLLLLDDLLDDLDLLL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBCHIK
AKCBPJCJGIIJCMCEHKPMGLHBNK
AEFBJLBGMHPKMIHDGICIAJMGGK
AAPHBAJIDBDPPIKJPJAMPIPNDK
AHKFAOKLLANCKCDCCIECCDLKKK
DDLLDDLDLLDLLLLDDLDDDLDLDL
Disable All 2D Symbologies
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCFHIOCODMJNK
AEFBJLBGMHPKNPDAMNNPKGLEGK
AAPHBAJJCAGEAGOFFMPMIIJHBK
AFLFALLLOMIKOEILGAEMAFDJJK
DLLLDDLDLDDLLLLDLDLDDLDLDL
ISSUE IDENTICAL CODES
Disabled
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGEFIK
AKCBPJCJGIIJCMCEGONNMKEBLK
AEFBJLBGMHPKMKDMODLODEPFGK
AAPHBAJJCEAFDONHGICMHEOBFK
AHLFAKKKKLPAGMBPDCNCEFJJJK
DLDLDDLDLDLLLLLDDDLDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAGGIK
AKCBPJCJGIIJCMCEHPOBGFPPNK
AEFBJLBGMHPKMNEIBGMCJCEEGK
AAPHBAJJDHECGHHIIFGABMIDDK
AGLFAPLDGNMGMGFKJHKOMMOILK
DLDLDDLDLDLLLLLDLDLDDLDLLL
See par. 5.3.1 for details.
54
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
Linear Symbologies
UPC/EAN/JAN FAMILY
EAN/UPC/JAN Disabled
EAN/UPC/JAN Enabled
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAGIK
AKCBPJCJGIIJCMCFHPJEAPMJJK
AEFBJLBGMHPKNJGOAPBLPJDHGK
AAPHBAJJDDGHGLPOOCPECPMHBK
AEKFANIFNPLCKOPGILGOAPPJIK
DLDLLLLDDLDLLLLDDLDDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCFIK
AKCBPJCJGIIJCMCFGOKIKAHHPK
AEFBJLBGMHPKNOBKPKGHFPIGGK
AAPHBAJJCACADCFBAPLIEHKFHK
AFKFAIJMBJIEAELDCOBCIGIIKK
DLDLLLLDDLDLLLLDLLDDDLDLLL
Add-On Disabled
Add-On Enabled
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAGIK
AKCBPJCJGIIJCMCEGMNCNABLNK
AEFBJLBGMHPKNLFGCFOFLCKFGK
AAPHBAJJCDCHKCPDAFNLELHBHK
AFKFANKPLHAKMMEFCPLKMKILIK
DDDLLLLDLDDLLLLDLLLDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECFIK
AKCBPJCJGIIJCMCEHNOOHPKFLK
AEFBJLBGMHPKNMCCNAJJBEBEGK
AAPHBAJJDAGAPLFMOIJHCDBDBK
AEKFAILGHBDMGGAAIKMGEDPKKK
DDDLLLLDLDDLLLLDDLLDDLDLLL
UPCE Expansion Disabled
UPCE Expansion Enabled
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFFIK
AKCBPJCJGIIJCMCFHONJFCELPK
AEFBJLBGMHPKMOGEHEDECGPHGK
AAPHBAJJCEGAPBDAIMJHOMLDDK
AGLFANOFFIFOCCMEAMJEKCELJK
DLDLLLLDDDLLLLLDDLLDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHGIK
AKCBPJCJGIIJCMCFGPOFPNPFJK
AEFBJLBGMHPKMJBAIBEIIAEGGK
AAPHBAJJDHCHKIJPGBNLIENBFK
AHLFAIPMJOGIIIIBKJOICLDKLK
DLDLLLLDDDLLLLLDLLLDDLDLDL
CODE 39 FAMILY
Code 39 Std - No Check Digit
Control
Code 39 Std - Disabled
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEHMOOACIBLK
AEFBJLBGMHPLNJFIOHOGPCCEGK
AAPHBAJJCHACGHGINLINEBBHHK
AFKFAKJMEMGGGAJIEDJCKCIJIK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCEGNNCKNDPNK
AEFBJLBGMHPLNOCMBCJKFEJFGK
AAPHBAJJDEEFDOMHDGMBCJHFBK
AEKFAPIFIKFAMKNNOGOOCLPIKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Code 39 Std - Check Digit Control
without Transmission
Code 39 Std - Check Digit Control
and Transmission
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFDAGIK
AKCBPJCJGIIJCMCFHLJJCPMNJK
AEFBJLBGMHPKMOFIMAACBIAHGK
AAPHBAJICAANDLCFGJNAMAILFK
AHKFAMOGNDGAKHJFDBIOGOAILK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFHHHIK
AKCBPJCJGIIJCMCFGONIEELJPK
AEFBJLBGMHPLNKGBFJFAIMEGGK
AAPHBAJICADDKEFBBBEELBFLFK
AELFANJIOLDCAOIJKDCGGMGKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
55
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
Code 39 Full ASCII - Disabled
Code 39 Full ASCII- Enabled
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCFGPKINNFDPK
AEFBJLBGMHPLNLGAMNBILJLGGK
AAPHBAJJDHECKOGFDMKCCFKBBK
AEKFAKLGCENOACCLOHEGGHPLIK
DLLLLLLDDLDLLLLDLLDDDLDLLL
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCFHOJEHCONJK
AEFBJLBGMHPLNMBEDIGEBPAHGK
AAPHBAJJCEAFPHMKNBOOENMDHK
AFKFAPKPOCOIKIGOECDKOOIKKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
Code Length Check - Disabled
Code Length Check - Enabled
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEHNKDFPADNK
AEFBJLBGMHPLMOFCJMMJCNOEGK
AAPHBAJJDAAFPNKGLFOOICGDFK
AHLFAKPMMLIKOMKKMEGIAPDLJK
DDLLLLLDLLLLLLLDDLDDDLDLDL
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEGMJPPALNLK
AEFBJLBGMHPLMJCGGJLFILFFGK
AAPHBAJJCDECKEAJFIKCOKABDK
AGLFAPOFANLMEGOPGBBEIGEKLK
DDLLLLLDLLLLLLLDLLDDDLDLDL
Minimum Code Length
APCPBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGEEIK
AKCBPJCJGIIJCMCEGNNGNFFFPK
AEFBJLBGMHPLMKBCBFFMJDKFGK
AAPHBAJIDACCNFJPDFKBCEHDHK
AELFALOFHPBCAEMCMPKICKNLJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCPBLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEAEFIK
AKCBPJCJGIIJCMCEGKPOPBMLNK
AEFBJLBGMHPLMLGGICCOGBFFGK
AAPHBAJJDEGOIMFEFDHLBJMDDK
AFLFAJOLIGEMENAFDGFAALAIIK
DDDLLLLDDDLLLLLDLLDDDLDLDL
Read the number in the range
001-255.
Start-Stop Character
Start-Stop Character
Transmission - Disabled
Transmission - Enabled
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFHFIK
AKCBPJCJGIIJCMCEHKILHLJNPK
AEFBJLBGMHPLMPCGALLLNPBEGK
AAPHBAJIDEEJKEGNNDDELPNDBK
AGLFAIPCDCNEKFGNDNJACOOIIK
DLLLLLLDDDDLLLLDDDDDDLDLLL
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDFGIK
AKCBPJCJGIIJCMCEGLLHNECDJK
AEFBJLBGMHPLMIFCPOMHHJKFGK
AAPHBAJICHAOPNMCDOHINHLBHK
AHLFANOLPEOCAPCIJIOMKHJJKK
DLLLLLLDDDDLLLLDLDDDDLDLLL
CODE 32 FAMILY
Disabled
Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDFEIK
AKCBPJCJGIIJCMCEGPNMPAEJPK
AEFBJLBGMHPKNLEJNCGBMPJFGK
AAPHBAJJCADHJEDNNIKEEBPNHK
AHLFAOJKMFJAIJHEMLKACLHLLK
DLLLLLLDLDLLLLLDDLLDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFHHIK
AKCBPJCJGIIJCMCEHOOAFPPHJK
AEFBJLBGMHPKNMDNCHBNGJCEGK
AAPHBAJJDDHAMNJCDFOICJJPBK
AGLFALIDADKGCDDBGONMKCAKJK
DLLLLLLDLDLLLLLDLLLDDLDLDL
56
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
INTERLEAVED 2 OF 5 FAMILY
Enabled - No Check Digit
Disabled
Control
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCFHKONPJJDLK
AEFBJLBGMHPKMOFKALIECAOEGK
AAPHBAJJCHEGJKMBDBALLHAHDK
AHKFAMLOPAHAEENBHNCEIKCLIK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCFGLNBFGCNNK
AEFBJLBGMHPKMJCOPOPIIGFFGK
AAPHBAJJDEABMDGONMEHNPGFFK
AGKFAJKHDGEGOOJENIFIADFKKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Enabled - Check Digit Control
and without Transmission
Enabled - Check Digit Control
and Transmission
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECEHIK
AKCBPJCJGIIJCMCEHNJKNENPJK
AEFBJLBGMHPLNJFKCMGAMKMHGK
AAPHBAJICAEJMGIMIDFGDGJLBK
AFKFAKMEGPHGIDNMAPDIEGKKLK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEGDGIK
AKCBPJCJGIIJCMCEGINLLPKLPK
AEFBJLBGMHPKMNGDLFDCFOIGGK
AAPHBAJICAHHFJPIPLMCEHELBK
AGLFALLKFHCECKMAJNJAEEMIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Code Length Check - Disabled
Code Length Check - Enabled
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCEGJKLCGEBPK
AEFBJLBGMHPKMMGCCBHKGLHGGK
AAPHBAJJDHAGFDMMNGCENDLBFK
AGKFAMJEJIMICGGCNJPAEPFJIK
DLLLLLLDDLLLLLLDLLDDDLDLDL
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCEHIJHIJPPJK
AEFBJLBGMHPKMLBGNEAGMNMHGK
AAPHBAJJCEEBAKGDDLGILLNDDK
AHKFAJINFOPOIMCHHMIMMGCIKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Minimum Code Length
APCLFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCAFIK
AKCBPJCJGIIJCMCEHIJDPBJFLK
AEFBJLBGMHPKNPCINDMAAKPHGK
AAPHBAJICACGOBDLDIAILGNFFK
AHLFANONKLLMECDIFFMKMHALJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Read the number in the range
001-255.
Maximum Code Length
APCLFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHAFIK
AKCBPJCJGIIJCMCFGLNFCOEHPK
AEFBJLBGMHPKNNBAPJDOEBGFGK
AAPHBAJIDAGGCIDGNPCHNCGDDK
AGLFANMHMDAECAILPBBOACHJJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Read the number in the range
001-255.
57
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
CODABAR FAMILY
Enabled - No Check Digit
Control
Disabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCEHNIKIHHBJK
AEFBJLBGMHPKMOCNKKOMFGEFGK
AAPHBAJICCDMJFLCEHAEFPKNDK
AGLFAIJFIDOKOIEPMDGACJHKLK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCEGMLGCIMPPK
AEFBJLBGMHPKMJFJFPJAPAPEGK
AAPHBAJIDBHLMMBNKKEIDHMPFK
AHLFANIMEFNMECAKGGBMKAALJK
DDDLLLLDDDDLLLLDDDLDDLDLLL
Enabled - Check Digit Control
without Transmission
Enabled - Check Digit Control
and Transmission
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKPNKKDNLK
AEFBJLBGMHPLNJCNINAILMGGGK
AAPHBAJJCFDDMJPPPFFJNODBBK
AELFAOOPBMOMCPECLBHMOFPLIK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEFEIK
AKCBPJCJGIIJCMCFGPLMMBEJNK
AEFBJLBGMHPKMNBEBEFKCICHGK
AAPHBAJJCFANFGILINMNKPOBBK
AHKFAPJBCELOIGFOCDNEOHJJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCFGOMMFIKDNK
AEFBJLBGMHPKMMBFIABCBNNHGK
AAPHBAJIDCHMFMLPKACLDLBLFK
AHLFAILPOLFCIKPMGHLEOMAILK
DLDLLLLDLLDLLLLDDDDDDLDLLL
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCFHPPAPHBNLK
AEFBJLBGMHPKMLGBHFGOLLGGGK
AAPHBAJICBDLAFBAENGHFDHJDK
AGLFANKGCNGECALJMCMIGFHJJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Minimum Code Length
APCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAGHIK
AKCBPJCJGIIJCMCFHPPEIPHHJK
AEFBJLBGMHPKNPFPHCKIHMFGGK
AAPHBAJJCFFMOOEIEOAHFOHPFK
AGKFAJMGNICGOOKGOLIOGEFKKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFGHIK
AKCBPJCJGIIJCMCEGMLCFAKFNK
AEFBJLBGMHPKNNGHFIFGDHMEGK
AAPHBAJJDFBMCHEFKJCIDKMJDK
AHKFAJOMLAJOIMBFEPFKKBCIKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
Read the number in the range
001-255.
58
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
CODE 128 FAMILY
Code 128 - Disabled
Code 128 - Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCFHLIJHMGDJK
AEFBJLBGMHPLNJCPEGIOIEIFGK
AAPHBAJICCHIGIBLKNICKJLNHK
AELFAOLHDPPMMMAGPNNGABNILK
DDDLLLLDDDLLLLLDLDLDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGKLFNDNNPK
AEFBJLBGMHPLNOFLLDPCCCDEGK
AAPHBAJIDBDPDBLEEAMOMBNPBK
AFLFALKOPJMKGGEDFIKKIIKJJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCEGIMPKDLBNK
AEFBJLBGMHPLNLBHGMHAMPBHGK
AAPHBAJIDCDIKBBGEKKNMNALBK
AFLFAOJNFHEEKOLFFJACMEKKLK
DLDLLLLDLLLLLLLDDDDDDLDLDL
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCEHJPDAMAPLK
AEFBJLBGMHPLNMGDJJAMGJKGGK
AAPHBAJICBHPPILJKHOBKFGJHK
AELFALIEJBHCAEPAPMHOENNLJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Code 128 - Min. Code Length
APCPBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBCGIK
AKCBPJCJGIIJCMCEHJPHHEGFJK
AEFBJLBGMHPLMIFNJOMKKOJGGK
AAPHBAJJCFBIBDOBKEIBKIGPBK
AEKFAPOEGEDAMKOPNFDIEMPIKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Read the number in the range
001-255.
Code 128 - Max. Code Length
APCPBPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFECGIK
AKCBPJCJGIIJCMCFGKLBKLLHNK
AEFBJLBGMHPLMKGFLEDEOFAEGK
AAPHBAJJDFFINKOMEDKOMMNJHK
AFKFAPMOAMIIKIFMHBOMIJIKKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Read the number in the range
001-255.
EAN 128 - Disabled
EAN 128 - Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHEIK
AKCBPJCJGIIJCMCFHPIMDPEDNK
AEFBJLBGMHPKNMBAFIGHBHMGGK
AAPHBAJIDFHLMDPGCLGGHFPJHK
AFLFAJOCNPLGABOEOJOGCBLIIK
DDLLDLLDDDDLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECFHIK
AKCBPJCJGIIJCMCFGOLAJAPNLK
AEFBJLBGMHPKNLGEKNBLLBHHGK
AAPHBAJICGDMJKFJMGCKBNJLBK
AELFAMPLBJIAKLKBEMJKKIMJKK
DDLLDLLDDDDLLLLDDLLDDLDLLL
59
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
EAN 128 - Code Length Check
Disabled
EAN 128 - Code Length Check
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHEIK
AKCBPJCJGIIJCMCEGMMKOAJBJK
AEFBJLBGMHPKNOCIHCJJFMFEGK
AAPHBAJICFDLAKPLMMEJBBEPBK
AELFAJMILHAOGDFHENDCOEMKIK
DLLLDLLDLLDLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFHIK
AKCBPJCJGIIJCMCEHNPGEPCPPK
AEFBJLBGMHPKNJFMIHOFPKOFGK
AAPHBAJIDGHMFDFECBAFHJCNHK
AFLFAMNBHBDIMJBCOIEOGNLLKK
DLLLDLLDLLDLLLLDLLDDDLDLLL
EAN 128 - Min. Code Length
APCPFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHBHIK
AKCBPJCJGIIJCMCEHNPCDHEFNK
AEFBJLBGMHPKMNGCIACDDNNFGK
AAPHBAJJDCBLLIAMCCGFHECLBK
AFKFAILBIEHKAHANMBAIGMJIJK
DDDLDLLDLDDLLLLDLDLDDLDLLL
Read the number in the range
001-255.
Maximum Code Length
APCPFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFCBHIK
AKCBPJCJGIIJCMCFGOLEOIJHJK
AEFBJLBGMHPKMPFKKKNNHGEHGK
AAPHBAJJCCFLHBABMFEKBAJNHK
AEKFAIJLOMMCGFLOGFNMKJOKJK
DLDLDLLDDLDLLLLDDDDDDLDLLL
Read the number in the range
001-255.
CODE 93 FAMILY
Disabled
Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGEIK
AKCBPJCJGIIJCMCEHIPDHBCLLK
AEFBJLBGMHPKNJBJKOHDIPJGGK
AAPHBAJIDGBNGEINJEPLMHGNBK
AFLFAJKOKMCIACGIDFCKKMKILK
DLLLLLLDLLLLLLLDLDDDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEHIK
AKCBPJCJGIIJCMCEGJMPNOJFNK
AEFBJLBGMHPKNOGNFLAPCJCHGK
AAPHBAJICFFKDNCCHJLHKPAPHK
AELFAMLHGKBOKICNJAFGCFNJJK
DLLLLLLDLLLLLLLDDDDDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGEIK
AKCBPJCJGIIJCMCFGLLFKOPJPK
AEFBJLBGMHPKNLCBIEINMEAEGK
AAPHBAJICGFNKNIAHDNEKDNLHK
AELFAJIEMEJAGANLJBPOGJNKLK
DDLLLLLDDDLLLLLDDDLDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEHIK
AKCBPJCJGIIJCMCFHKIJABEHJK
AEFBJLBGMHPKNMFFHBPBGCLFGK
AAPHBAJIDFBKPECPJOJIMLLJBK
AFLFAMJNACKGMKJODEICOAKLJK
DDLLLLLDDDLLLLLDLDLDDLDLDL
Minimum Code Length
APCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGAHIK
AKCBPJCJGIIJCMCFHKINHJCNLK
AEFBJLBGMHPKMIGLHGDHKFIFGK
AAPHBAJJDBHNBPHHJNPIMGLPHK
AFKFAIPNPHOEAEIBBNMEOBIIKK
DLDLLLLDDLLLLLLDLLDDDLDLDL
Read the number in the range
001-255.
60
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
Maximum Code Length
APCLBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEDAHIK
AKCBPJCJGIIJCMCEGJMLKGPPPK
AEFBJLBGMHPKMKFDFMMJOOBHGK
AAPHBAJJCBDNNGHKHKNHKCAJBK
AEKFAINHJPFMGGDCLJBACEPKKK
DDDLLLLDLDLLLLLDDLLDDLDLDL
Read the number in the range
001-255.
GS1 DATABAR™ FAMILY
Disable GS1 DataBar
Expanded
Enable GS1 DataBar Expanded
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCFHNIDCFBJLK
AEFBJLBGMHPKMNHKJODMJBJGGK
AAPHBAJIDCFJFPNCEGJBEKGJFK
AHKFAOOHMDEMKBLOPEIOKOKKJK
DLLLLDLDDDLLLLLDDDLDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCFGMLPIKKHNK
AEFBJLBGMHPKMKAOGLEADHCHGK
AAPHBAJICBBOAGHNKLNNCCALDK
AGKFALPOAFHKALPLFBPCCHNLLK
DLLLLDLDDDLLLLLDLDLDDLDLLL
Disable GS1 DataBar Limited
Enable GS1 DataBar Limited
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCEGOMFPKMLPK
AEFBJLBGMHPKMPECLEMCNKAEGK
AAPHBAJICCBJJGNPKBLOCONPDK
AGKFAOMNKLPEMDANFAFKGLNIJK
DDLLLDLDLLLLLLLDLDDDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCEHPPJFFHFJK
AEFBJLBGMHPKMIDGEBLOHMLFGK
AAPHBAJIDBFOMPHAEMPCEGLNFK
AHKFALNEGNMCGJEIPFCGOCKJLK
DDLLLDLDLLLLLLLDDDDDDLDLLL
Disable GS1 DataBar
Omnidirectional
Enable GS1 DataBar
Omnidirectional
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDGEIK
AKCBPJCJGIIJCMCFHMMOHIJLNK
AEFBJLBGMHPKNKHAOFBDEOFGGK
AAPHBAJICFFOMFBMCIPCIJBNHK
AFLFAOIHEEKACNIMHDHEADBIIK
DLLLLDLDDLDLLLLDDDDDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFEHIK
AKCBPJCJGIIJCMCFGNPCNHCFLK
AEFBJLBGMHPKNNAEBAGPOIOHGK
AAPHBAJIDGBJJMLDMFLOOBHPBK
AELFALJOICJGIHMJNGAIIKGJKK
DLLLLDLDDLDLLLLDLDDDDLDLDL
Disable GS1 DataBar
Expanded Stacked
Enable GS1 DataBar Expanded
Stacked
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGGEIK
AKCBPJCJGIIJCMCEGPIIKHEJJK
AEFBJLBGMHPKNIEIMPONAFMEGK
AAPHBAJIDFBOAMBBMPNNONKLBK
AELFAOKNCMBIEPDPNHKAMGGKIK
DDLLLDLDLDDLLLLDLDLDDLDLDL
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCEHOLEAIPHPK
AEFBJLBGMHPKNPDMDKJBKDHFGK
AAPHBAJICGFJFFLOCCJBIFMJHK
AFLFALLEOKCOOFHKHCNMEPBLKK
DDLLLDLDLDDLLLLDDDLDDLDLDL
Disable GS1 DataBar Stacked
Enable GS1 DataBar Stacked
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAGFIK
AKCBPJCJGIIJCMCEGIKAIDNHLK
AEFBJLBGMHPKNJDMFIJPPHDEGK
AAPHBAJJDBFCFFNKKJAHNABLFK
AFLFAMKDNFEGAGPICOFIOHLJJK
DLLLLDLDDLLLLLLDLLLDDLDLLL
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGEGIK
AKCBPJCJGIIJCMCEHJJMCMGJNK
AEFBJLBGMHPKNOEIKNODFBIFGK
AAPHBAJJCCBFAMHFEEELLIHJDK
AELFAJLKBDHAKMLNILCEGOMILK
DLLLLDLDDLLLLLLDDLLDDLDLLL
61
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
2D Symbologies
PDF417
Disabled
Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCFHMOHKAOJJK
AEFBJLBGMHPLNKAPNDDGDFPHGK
AAPHBAJJDHGHKNAINKBIFENDBK
AELFAMOOAMMACJGJHEHMCFFJKK
DLDLLDLDLDLLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCFGNNLAPFHPK
AEFBJLBGMHPLNNHLCGEKJDEGGK
AAPHBAJJCECAPEKHDHFEDMLBHK
AFLFAJPHMKPGIDCMNBAAKMCIIK
DLDLLDLDLDLLLLLDDLLDDLDLLL
Macro PDF417 Unbuffered
Mode
Macro PDF417 Buffered Mode
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEADFIK
AKCBPJCJGIIJCMCFGKMJBLIDJK
AEFBJLBGMHPLMJCKJOPLIOJEGK
AAPHBAJICFHPPHFCCGMPOHFPFK
AGLFAPOKALBIEHBOHDIEMMGIIK
DLLLDLLDLLLLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGBGIK
AKCBPJCJGIIJCMCFHLPFLEDNPK
AEFBJLBGMHPLMOFOGLIHCICFGK
AAPHBAJIDGDIKOPNMLIDIPDNDK
AHLFAKPDMNCOONFLNGPIEFBJKK
DLLLDLLDLLLLLLLDLLDDDLDLDL
The following command carries out its specific function and does not require
reading the Enter or Exit and Save Configuration codes.
Abort Macro PDF417 Buffered
Mode
AMHOHNBOHNGNENEIEPANHOGOCK
AHNBMBIMDKEOFMHMLJAKFDFGJK
AKCBPJCJGIIJCMCEHNJNLOIBNK
AEFBJLBGMHPLNLDJJICILJCHGK
AAPHBAJIDGAIDDPMENJHMACFDK
AELFAONOEEHGMMCDPDLGGHLLJK
It stops buffering the read codes
at any time. All the buffered
codes will not be saved.
DDLLLLLLLDDLLLLDDLDDDLDLDL
MICRO PDF417
Disabled
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCEGPKBHPDLNK
AEFBJLBGMHPLNIDHPJMIHOGFGK
AAPHBAJJCHCHGEAFDNDHDAGFHK
AFLFAMMEGEHIELNKNAKIOACLKK
DDDLLDLDDLLLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCEHOJNNAIFLK
AEFBJLBGMHPLNPEDAMLENINEGK
AAPHBAJJDEGADNKKNAHLFIAHBK
AELFAJNNKCEOOBJPHFNEGJFKIK
DDDLLDLDDLLLLLLDLLDDDLDLLL
62
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
DATAMATRIX FAMILY
Disabled
Enabled
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCEHLIANOALLK
AEFBJLBGMHPLNKHIHCFOEDFGGK
AAPHBAJIDCBNKCHLKMBHLMHJBK
AFKFAIMFHPFKIFPHMKDIIGAIJK
DLLLLDLDDDDLLLLDDDLDDLDLDL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCEGKLMHBLFNK
AEFBJLBGMHPLNNAMIHCCOFOHGK
AAPHBAJICBFKPLNEEBFLNEBLHK
AEKFANNMLJGMCPLCGPEEAPHJLK
DLLLLDLDDDDLLLLDLDLDDLDLDL
Minimum Code Length
APCPFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCBFIK
AKCBPJCJGIIJCMCFHJPONGANLK
AEFBJLBGMHPLMLAKKKBKGJEFGK
AAPHBAJJDFHNNJIBKFBELNKLHK
AFLFAJJGCEJGIDBOOCNGMLCIIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Read the number in the range
0001-3600.
Maximum Code Length
APCPFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHBFIK
AKCBPJCJGIIJCMCEGKLIAJNPPK
AEFBJLBGMHPLMJDCIAOECCNHGK
AAPHBAJJCFDNBAIMECDLNJBNBK
AELFAJLMEMCOOBKNEGACAOFKIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
Read the number in the range
0001-3600.
Rectangular Style – Disabled
Rectangular Style - Enabled
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBCEIK
AKCBPJCJGIIJCMCFGOKDHIMFLK
AEFBJLBGMHPLMODOLEPNCFPEGK
AAPHBAJJDBBGKIHDEDIBCGALBK
AHLFAKIBGJFACCLBBAOOMPBLJK
DLLLLDLDDLDLLLLDLLLDDLDLDL
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHAHIK
AKCBPJCJGIIJCMCFHPJPNHHLNK
AEFBJLBGMHPLMJEKEBIBIDEFGK
AAPHBAJJCCFBPBNMKOMNEOGJHK
AGLFAPJIKPGGIIPELFJCEGGKLK
DLLLLDLDDLDLLLLDDLLDDLDLDL
QR FAMILY
Disabled
Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHJJOFGLDLK
AEFBJLBGMHPLMNDLNHKJOMCEGK
AAPHBAJJCDEGFMDHAJOHMMBDDK
AHLFANNFCDACMDEOICDGKAILKK
DDLLLDLDDLDLLLLDLLDDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGIKCPJANNK
AEFBJLBGMHPLMKEPCCNFEKJFGK
AAPHBAJJDAABAFJIOEKLKEHBFK
AGLFAIMMOFDEGJALCHEKCJPKIK
DDLLLDLDDLDLLLLDDLDDDLDLDL
63
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
POSTAL CODES FAMILY
All Disabled
Australian Post - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEDFIK
AKCBPJCJGIIJCMCEHPJNKNKBLK
AEFBJLBGMHPKNKDJDLMLDOOEGK
AAPHBAJJCDACKBJOODGBDKADHK
AFLFALPHJPBEOHAHLMIAIICJKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECBGIK
AKCBPJCJGIIJCMCEGOKBACBPNK
AEFBJLBGMHPKNNENMOLHJIFFGK
AAPHBAJJDAEFPIDBAOCNFCGBBK
AELFAOOOFJCCENECBJPMABFIIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
Japan Post - Enabled
PLANET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFHBEIK
AKCBPJCJGIIJCMCFHIOKIAONJK
AEFBJLBGMHPLMNDJBMCPNEMHGK
AAPHBAJICEANPNNDFBDMLLJPFK
AHLFANINAABCCAAKMOJMEEKIJK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFDGFIK
AKCBPJCJGIIJCMCFGNKLOLJJPK
AEFBJLBGMHPKNJAAIFHNEAIGGK
AAPHBAJICEDDGCKHCJKIMKEPFK
AEKFAMPDDIEAIJBGFMDEEGMKIK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET with B and B' -
Enabled
POSTNET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEGGHIK
AKCBPJCJGIIJCMCEHLOAGJGLLK
AEFBJLBGMHPLMJHEFHOFAMBEGK
AAPHBAJJDAHLGHEFHGLJCDLBBK
AHKFAPJAGBHAOEFOILFEADDKJK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKEAEEIK
AKCBPJCJGIIJCMCEGKNMMGNFNK
AEFBJLBGMHPLMOAAKCJJKKKFGK
AAPHBAJJCDDMDOOKJLPFELNDHK
AGKFAKIJKHEGEOBLCOCIIKELLK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET and PLANET -
Enabled
POSTNET with B and B' and
PLANET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFFEGIK
AKCBPJCJGIIJCMCFHMJHEECHJK
AEFBJLBGMHPKNOHEHAABOGDHGK
AAPHBAJIDHHEDLAIMEOEKCCNDK
AFKFAJOKPOHGCDFDPJEIMPLLKK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNMFGLJLJK
AEFBJLBGMHPKNOBLDBLACNDGGK
AAPHBAJJDABIMJLFECPBEAKLBK
AFLFANKLDMHMMPBBAEMICMKLIK
DLDLLDLDLLDLLLLDLDLDDLDLDL
Royal Mail Code (RM4SCC) -
Enabled
KIX Code - Enabled
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBFFIK
AKCBPJCJGIIJCMCEGLIOOJGJNK
AEFBJLBGMHPLMOGPODCIGBKEGK
AAPHBAJICEFAMMFHBNOAKJFFFK
AGLFAOMIGFEMKCFJNDKIGJFLJK
DLDLLDLDLLDLLLLDDDLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHHGIK
AKCBPJCJGIIJCMCEHKLCEGNHLK
AEFBJLBGMHPLMJBLBGFEMHBFGK
AAPHBAJIDHBHJFPIPAKMMBDHDK
AHLFALNBKDHKAIBMHGNEOACKLK
DLDLLDLDLLDLLLLDLDLDDLDLDL
64
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
AUSTRALIAN TABLE SELECTION
N Table
C Table
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBDFIK
AKCBPJCJGIIJCMCFGMNLHCHDPK
AEFBJLBGMHPKNIABBBDFHFHGGK
AAPHBAJJDDECGIJDAEEOFOLFBK
AELFALNNPHKMIFLEBIFEENFLKK
DLLLLDLDLDLLLLLDDLLDDLDLLL
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHBGIK
AKCBPJCJGIIJCMCFHNOHNNMNJK
AEFBJLBGMHPKNPHFOEEJNDMHGK
AAPHBAJJCAAFDBDMOJACDGNHHK
AFLFAOMEDBJKCPPBLNCIMECKIK
DLLLLDLDLDLLLLLDLLLDDLDLLL
MAXICODE FAMILY
Maxicode Mode 0 - Disabled
Maxicode Mode 0 Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGNMLNKJJNK
AEFBJLBGMHPKMPFNEDEGKHDEGK
AAPHBAJICBAJKABBHMMBCEFDDK
AELFANPINJGOIGDMLEEAIKCIKK
DLDLLDLDLLDLLLLDDDDDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCEGIK
AKCBPJCJGIIJCMCEHMPHHFCHLK
AEFBJLBGMHPKMICJLGDKABIFGK
AAPHBAJIDCEOPJLOJBINEMDBFK
AFLFAIOBBPFICMHJBBDMADFJIK
DLDLLDLDLLDLLLLDLDDDDLDLDL
Maxicode Mode 1 - Disabled
Maxicode Mode 1 - Enabled
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKECGEIK
AKCBPJCJGIIJCMCEGKODPOAHPK
AEFBJLBGMHPKMOCJNEDEFFMEGK
AAPHBAJJCFEFPJNKBKBLBJODHK
AFLFAPPGCADAMPPLENLIKLPLLK
DDDLLDLDDDLLLLLDDLDDDLDLLL
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEEEHIK
AKCBPJCJGIIJCMCEHLNPFBLJJK
AEFBJLBGMHPKMJFNCBEIPDHFGK
AAPHBAJJDGACKAHFPHFHHBIBBK
AELFAKOPOGAGGFLOOIMECCIKJK
DDDLLDLDDDLLLLLDLLDDDLDLLL
Maxicode Mode 2 - Disabled
Maxicode Mode 2 - Enabled
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHGEIK
AKCBPJCJGIIJCMCFHJKFCBNFLK
AEFBJLBGMHPKMMBBPOMKBOFGGK
AAPHBAJJDFAFDANHPNDEHNFFBK
AELFAPNMEIIIKNEIOJGMGOIJLK
DLDLLDLDLLLLLLLDLLLDDLDLLL
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFBEHIK
AKCBPJCJGIIJCMCFGIJJIOGLNK
AEFBJLBGMHPKMLGFALLGLIOHGK
AAPHBAJJCGECGJHIBAHIBFDHHK
AFLFAKMFIOLOAHANEMBAOHPIJK
DLDLLDLDLLLLLLLDDLLDDLDLLL
Maxicode Mode 3 - Disabled
Maxicode Mode 3 - Enabled
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFBGIK
AKCBPJCJGIIJCMCFGJINMMPLJK
AEFBJLBGMHPKMPHJJGCHCNFFGK
AAPHBAJJCFBENOJCIIMFBFDLFK
AGLFAMNNLJDOOBHNMIJIGENJIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDDFIK
AKCBPJCJGIIJCMCFHILBGDEFPK
AEFBJLBGMHPKMIANGDFLILOEGK
AAPHBAJJDGFDIHDNGFIJHNFJDK
AHLFAJMEHPAIELDIGNOEONKIKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
65
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
Maxicode Mode 4 - Disabled
Maxicode Mode 4 - Enabled
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFABGIK
AKCBPJCJGIIJCMCEHKMLBDCJNK
AEFBJLBGMHPKMNEBLMNJGGMHGK
AAPHBAJJDFFEBHJPGPOKHBINDK
AHLFAMPHNBIGIDMOGMEMKBKLIK
DLLLLDLDLDLLLLLDLLLDDLDLLL
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGDFIK
AKCBPJCJGIIJCMCEGLPHLMJHLK
AEFBJLBGMHPKMKDFEJKFMAHGGK
AAPHBAJJCGBDEODAICKGBJOPFK
AGLFAJOOBHLACJILMJDACINKKK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Maxicode Mode 5 - Disabled
Maxicode Mode 5 - Enabled
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBHIK
AKCBPJCJGIIJCMCEHNODDHLHPK
AEFBJLBGMHPKMMDFCLKLJEDHGK
AAPHBAJIDBBIEOFEAJDAEMDNHK
AGLFAOPJCINIMKAJJFLEIAHIJK
DDLLLDLDDLDLLLLDLDLDDLDLDL
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADEIK
AKCBPJCJGIIJCMCEGMNPJIAJJK
AEFBJLBGMHPKMLEBNONHDCIGGK
AAPHBAJICCFPBHPLOEHMCEFPBK
AHLFALOAOOOOGAEMDAMIAJAJLK
DDLLLDLDDLDLLLLDDDLDDLDLDL
Maxicode Mode 6 - Disabled
Maxicode Mode 6 - Enabled
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBHIK
AKCBPJCJGIIJCMCFGOKFOIGFLK
AEFBJLBGMHPKMOANABFFNPKFGK
AAPHBAJICBFIIHFJOOBPCIILBK
AHLFAONDEAGAKILKDBGAEFAKJK
DLLLLDLDLDDLLLLDDDDDDLDLDL
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDEIK
AKCBPJCJGIIJCMCFHPJJEHNLNK
AEFBJLBGMHPKMJHJPECJHJBEGK
AAPHBAJIDCBPNOPGADFDEAOJHK
AGLFALMKIGFGACPPJEBMMMHLLK
DLLLLDLDLDDLLLLDLDDDDLDLDL
AZTEC
Disabled
Enabled
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGFHIK
AKCBPJCJGIIJCMCFHIPKNDEDJK
AEFBJLBGMHPKNKEOJKKDEIEFGK
AAPHBAJICGHIKOONJFGONCKJHK
AEKFAPNMOMIOELJJACMECLHIJK
DDDLLDLDLLDLLLLDDDDDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAHEIK
AKCBPJCJGIIJCMCFGJMGHMPNPK
AEFBJLBGMHPKNNDKGPNPOOPEGK
AAPHBAJIDFDPPHECHICCLKMLBK
AFKFAKMFCKLIOBNMKHLIKCAJLK
DDDLLDLDLLDLLLLDLDDDDLDLDL
66
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
COMPOSITE CODES
Before enabling this symbology, it is necessary to enable the linear
barcode family (among GS1 DATABAR, EAN128 or UPC/EAN)
contained in the composite code to be read.
NOTE
Disabled
Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECFFIK
AKCBPJCJGIIJCMCEHKOEFLPLJK
AEFBJLBGMHPKMNANDPFEOHDHGK
AAPHBAJJDHCDFAKBDAJOKCMDFK
AGLFAKMMLANGANCAEKMKANPLKK
DLDLLDLDLDDLLLLDLLLDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEHGIK
AKCBPJCJGIIJCMCEGLNIPEEFPK
AEFBJLBGMHPKMKHJMKCIEBIGGK
AAPHBAJJCEGEAJAONNNCMKKBDK
AHLFAPNFHGOAKHGFOPLGIEIKIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Keep Linear Part
Discard Linear Part
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCFGJKCIECJNK
AEFBJLBGMHPKMPDFBFKKKMKFGK
AAPHBAJJCHGDJJKMNHLBMGHFDK
AHLFAKOGNIGOGPJDOOBOMIIJKK
DDDLLDLDDLDLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCFHIJOCLJHLK
AEFBJLBGMHPKMIEBOANGAKBEGK
AAPHBAJJDECEMAADDKPNKOBHFK
AGLFAPPPBOFIMFNGELGCEBPIIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
67
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
READING PARAMETERS
TRIGGER MODE
Trigger Level
Trigger Pulse
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCFGILHGJEHJK
AEFBJLBGMHPLNJAKKIEPNIOFGK
AAPHBAJJCAHEBANDBIMIMMMLBK
AEKFALNAJKBEGAIEALHCAKNIJK
DLLLLLLDLLLLLLLDDLLDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCFHJILMGPJPK
AEFBJLBGMHPLNOHOFNDDHOFEGK
AAPHBAJJDDDDEJHMPFIEKEKJHK
AFKFAOMJFMCCMKMBKOAOIDKJLK
DLLLLLLDLLLLLLLDLLLDDLDLDL
TRIGGER TYPE
Normal Trigger
Software Trigger
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCEHLPBLGJFNK
AEFBJLBGMHPLNLDCICLBJDHHGK
AAPHBAJJDADENJNOPPOHKIHNHK
AFKFALPKPCKMACDHKPKGMPKKJK
DDLLLLLDDDLLLLLDLLDDDLDLDL
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCEGKMNBJCLLK
AEFBJLBGMHPLNMEGHHMNDFMGGK
AAPHBAJJCDHDIAHBBCKLMABPBK
AEKFAOODDEJKKIHCAKNKEGNLLK
DDLLLLLDDDLLLLLDDLDDDLDLDL
FLASH MODE
Flash ON Duration
APCKBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBEFIK
AKCBPJCJGIIJCMCEHLIMMGBPLK
AEFBJLBGMHPLMKDCNBIMCELEGK
AAPHBAJIDCENBFNMNPOPKPPLBK
AGKFAMNAGIEEEEGBLADKIBMJJK
DDDLLLLLLDLLLLLDLLLDDLDLDL
Read
a
number in the range
01-99, which corresponds to a
max 9.9 seconds duration.
Flash OFF Duration
APCKBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHMKEOCIBJK
AEFBJLBGMHPLMLEGEGPONGEEGK
AAPHBAJJDGABEMBHLJDFJCELFK
AHKFAONOJBBKANKGEJMCKABKIK
DLDLLLLLDLDLLLLDLDLDDLDLLL
Read
a
number in the range
01-99, which corresponds to a
max 9.9 seconds duration.
68
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
BEEPER TONE
BEEPER VOLUME
BEEPER DURATION
Tone 1
Tone 2
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDDFIK
AKCBPJCJGIIJCMCEGLNHEOKPJK
AEFBJLBGMHPLNIDKIIGKFCEEGK
AAPHBAJJDHAGBIKHCMHKLKKHHK
AHKFALKEEGHAIGJCOHOKIKDJIK
DLDLLLLDDDLLLLLDLDLDDLDLDL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGDHIK
AKCBPJCJGIIJCMCFHNJMMMFNNK
AEFBJLBGMHPKMIEOFKPCBONGGK
AAPHBAJICDEOBNEFHDGLFDFJDK
AEKFAIMHBPEAOLNKDAIKMPMJJK
DLDLLLLDDDLLLLLDDDLDDLDLDL
Tone 3
Tone 4
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGINNKHCJLK
AEFBJLBGMHPLNMHHMDKAIKJHGK
AAPHBAJICDHAICDBALPPCCIJDK
AHLFAJLJCHBCECMGKCCCMNKLIK
DLLLLLLDDDLLLLLDDDDDDLDLLL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHOJGCFNLPK
AEFBJLBGMHPKMMADBBDIMGAFGK
AAPHBAJJDHDIIHNDFEOOMLHHHK
AELFAKNKHOCCCPIOHFECIIFLJK
DLLLLLLDDDLLLLLDLDDDDLDLLL
Beeper OFF
Low Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEABGIK
AKCBPJCJGIIJCMCFGJKNDOMDLK
AEFBJLBGMHPLNNHGFHOILPGHGK
AAPHBAJJDEABIIAFCGBJLGHDHK
AHKFAOJHOIPOEOGEOGECMGDKKK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGDFIK
AKCBPJCJGIIJCMCFHIJBJBHNNK
AEFBJLBGMHPLNKACKCJEBJNGGK
AAPHBAJJCHEGNBKKMLFFNOBBBK
AGKFALIOCOMIOECBEDDOEPELIK
DDDLLLLDLLLLLLLDDDDDDLDLDL
Medium Volume
High Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFDDHIK
AKCBPJCJGIIJCMCEGONKBDIPJK
AEFBJLBGMHPKMKHGHAAMFFEEGK
AAPHBAJIDDAONEEIJEEEDHOPFK
AFKFAIONHHPIIJGJJEFOAKLLJK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEHLJLHIPLPK
AEFBJLBGMHPLNOEPOJFOMBAFGK
AAPHBAJIDDDAELDMOMNAEGDPFK
AGLFAJJDEPKKCAHFAGPGAINJIK
DDLLLLLDLLLLLLLDLDLDDLDLLL
Beeper Duration
APDNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGHFIK
AKCBPJCJGIIJCMCFHIJFOJBHPK
AEFBJLBGMHPLMODMKFFCNOOGGK
AAPHBAJICDCBDKPCMIDFNDBHHK
AGLFAPOONLIKCKDOGKHIEOGILK
DLLLLLLDLDLLLLLDDLLDDLDLDL
Read
a
number in the range
01-99, which corresponds to a
max 99 ms duration.
69
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
READS PER CYCLE
One Read per Cycle
Multiple Reads per Cycle
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCFGJNDOMLHLK
AEFBJLBGMHPKMOHPOFEFHMIEGK
AAPHBAJICFEKOCAJIEEBNCHBFK
AHLFAJNJFFJIOIFDILIAIBCLKK
DLDLLLLDDLLLLLLDLDLDDLDLDL
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHIOPEDAJNK
AEFBJLBGMHPKMJALBADJNKDFGK
AAPHBAJIDGANLLKGGJANLKBDDK
AGLFAMMAJDKOECBGCOPMAIFKIK
DLDLLLLDDLLLLLLDDDLDDLDLDL
SCAN TIMEOUT
Define Timeout
APCKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFBFIK
AKCBPJCJGIIJCMCEGPJJEPGJPK
AEFBJLBGMHPKNPDDECLBFAIEGK
AAPHBAJJCBAMPCACDANOIIBHDK
AGLFAJNBKGHKIIKPNCNOOEGLKK
DDDLLLLDDLLLLLLDLLLDDLDLDL
Read
a
number in the range
01-99, which corresponds to a
max 99 seconds duration. The
timeout is activated when the
decoding fails.
User Defined Beeper
USER DEFINED BEEPER TONE
Tone 1
Tone 2
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHJNMMMPPLK
AEFBJLBGMHPLMNAINJLLMGBGGK
AAPHBAJJDAEBELGEKFDGBNGFDK
AELFALOOKJCEGIBDMEMEOCPJJK
DDDLLLLDLDDLLLLDDDLDDLDLLL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAGEIK
AKCBPJCJGIIJCMCEGPJHEOANPK
AEFBJLBGMHPKNNHMALCDIKIEGK
AAPHBAJICEAJEOIGPKCHPEJLHK
AHLFAIINPABEAFFLBDKEKHAJIK
DDDLLLLDLDDLLLLDLDLDDLDLLL
Tone 3
Tone 4
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEBFIK
AKCBPJCJGIIJCMCEHKNGCFHJJK
AEFBJLBGMHPLMJEFJCHBBOMFGK
AAPHBAJICEDHNBPCICLDIFELHK
AEKFAJPDMIEGKMEHIBAMKFGLJK
DDLLLLLDLDDLLLLDLDDDDLDLDL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBBHIK
AKCBPJCJGIIJCMCFGMJNKHILNK
AEFBJLBGMHPKNJDBEAOJFCFHGK
AAPHBAJJDAHPNEBANNKCGMLFDK
AHKFAKJAJBHGMBAPFGGMOAJLIK
DDLLLLLDLDDLLLLDDDDDDLDLDL
70
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
USER DEFINED BEEPER VOLUME
Beeper OFF
Low Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEFEEIK
AKCBPJCJGIIJCMCFGPMIEHNPPK
AEFBJLBGMHPLMLAILLLFJCFHGK
AAPHBAJICHEKELAACOKAEILHBK
AELFAMPJJGEMILJBJIEAEKFLKK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEDGHIK
AKCBPJCJGIIJCMCFHOPEOIGBJK
AEFBJLBGMHPLMMHMEOMJDEOGGK
AAPHBAJIDEANBCKPMDOMCANFHK
AFLFAJOAFAHKCBNEDNDMMDCKIK
DLDLLLLDDLLLLLLDDLLDDLDLDL
Medium Volume
High Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFGGFIK
AKCBPJCJGIIJCMCEGILPGKJDNK
AEFBJLBGMHPKNMAIJMFBHIHEGK
AAPHBAJJCAEFBHENJMPNMJCLDK
AGLFAKIDAJEKEMJMOKFMIGNKJK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFCBEIK
AKCBPJCJGIIJCMCEHNPOABOHLK
AEFBJLBGMHPLMIDBAFADOMDFGK
AAPHBAJJCAHLIIDJOEGJLIPLDK
AFKFALPNDBBIOFIAHIPEIELIIK
DLLLLLLDDLLLLLLDLLDDDLDLLL
USER DEFINED BEEPER DURATION
Set Duration
APDNBLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCFHPLNMNIJNK
AEFBJLBGMHPLMPEIDCCACMBGGK
AAPHBAJJCHGNGDDJKOOPOOKHDK
AHLFANOACCNEGDPJJDIAGPLLKK
DDLLLLLDDLDLLLLDDDLDDLDLLL
Read
a
number in the range
01-99, which corresponds to a
max 990 ms duration.
TEST USER DEFINED BEEPER
The following command carries out its specific function and does not require reading
the Enter or Exit and Save Configuration codes.
Test User Defined Beeper
AMHOHNGODNGNENEIEPANHOGOCK
AHPHKJIMDKEOFMHMLJAKFEFGJK
AKCBPJCJGIIJCMCEGLLMFFCNLK
AEFBJLBGMHPLMKFGLMPMEBIEGK
AAPHBAJIDFHCJCKKJOFFLOMLDK
AHKFAOLIHAMCMHFJDPCCOPEKKK
DDDLLLLDLLLLLLLDDLDDDLDLDL
See par. 8.1.2 for details.
71
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
Code Ordering and Selection
CODES PER SCAN
One Code per Scan
All Codes per Scan
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCEHKJFDDGFPK
AEFBJLBGMHPKMMEHMPLLDHBGGK
AAPHBAJIDFAKCLAEGDGOLGMHDK
AGLFAJPDDNCAIKOACPFEEEFJKK
DDDLLLLDLDLLLLLDDDDDDLDLDL
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCEGLKJJMNLJK
AEFBJLBGMHPKMLDDDKMHJBKHGK
AAPHBAJICGENHCKLIOCCNOKFFK
AHLFAMOKPLBGCAKFIKCIMNCIIK
DDDLLLLDLDLLLLLDLDDDDLDLDL
CENTRAL CODE TRANSMISSION
The following command is available when working in "one code per scan".
Disabled
Enabled
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCEGNNCGFELLK
AEFBJLBGMHPKMIBIIDEEJMGEGK
AAPHBAJICCEGCICHCIIKAKHBBK
AGKFAKIIPDMIAKGAKBKGGBCIJK
DLDLLLLDDDDLLLLDLLLDDLDLLL
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCEHMOOMKPFNK
AEFBJLBGMHPKMPGMHGDIDKNFGK
AAPHBAJIDBABHBIIMFMGGCBDHK
AHKFAPJBDFPOKACFAENKOIFJLK
DLDLLLLDDDDLLLLDDLLDDLDLLL
See par. 2.6 for details.
ORDER BY CODE LENGTH
The following command is available when working in "all codes per scan".
Disabled
Enabled - Increasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFHOJELKJJPK
AEFBJLBGMHPKMKCAKJLKNHPGGK
AAPHBAJIDCAGOBCKMPKFGOMHHK
AHKFAKKCJLHAGINDAFHCKEFKJK
DDDLLLLDLLDLLLLDDLDDDLDLLL
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFGPKIBFCHJK
AEFBJLBGMHPKMNFEFMMGHBEHGK
AAPHBAJICBEBLIIFCCOJAGKFBK
AGKFAPLLFNEGMCJGKAAOCNCLLK
DDDLLLLDLLDLLLLDLLDDDLDLLL
Enabled - Decreasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEHJODJHNFNK
AEFBJLBGMHPLNNCAIOFODNNFGK
AAPHBAJJDFAJLNGHHNPIOPFLFK
AFKFAMNIAEHGKPNOHHGOGINLKK
DDDLLLLDLLDLLLLDDLDDDLDLLL
72
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
ORDER BY CODE SYMBOLOGY
The following command is available when working in "all codes per scan".
Set Order
APBPBPFOHNGNENEIEPANHOGOCK
1. Select the number of codes
in the range 0-9.
2. Select the
AHPNIJAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCFGPKMGNENLK
AEFBJLBGMHPKNJGKFLAALGHHGK
AAPHBAJJCFCGFDNNCBIJALKDHK
AGLFALNLKIAEAMIJIJEICMAIIK
DLLLLLLDLDDLLLLDLDLDDLDLLL
Datalogic
Standard Code Identifier for
each above defined code
from the table in Appendix
C.
See par. 2.6 for details.
Autoscan
AUTOSCAN MODE
Disabled
Enabled in Normal Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCEGPNABHKFLK
AEFBJLBGMHPLNJHNAJCHKOEEGK
AAPHBAJICFAOBPKAGOMHCEGBBK
AFLFAPPLOJIOMMBKLFDGKJIJKK
DLDLLLLDDLDLLLLDLDLDDLDLLL
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCEHOOMLIBLNK
AEFBJLBGMHPLNOAJPMFLAIPFGK
AAPHBAJIDGEJEGAPIDILEMADHK
AELFAKOCCPLIGGFPBAEKCAPIIK
DLDLLLLDDLDLLLLDDDLDDLDLLL
Enabled in Pattern Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCFGIKHDKOJJK
AEFBJLBGMHPKMOHNCOMDEEGHGK
AAPHBAJJCCABEDONNMJKKFPNDK
AHLFAJIBHGIIALBHMHCKGFAIJK
DLDLLLLDDLDLLLLDLDLDDLDLLL
See par. 2.4 for details.
AUTOSCAN AIMING SYSTEM
Disabled
Enabled
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCFHMJGMIHHPK
AEFBJLBGMHPLNLEFCDNJOFNGGK
AAPHBAJIDFEONGKNIJOIEANHHK
AELFAPNBIBDGKOKJBBOCGMPLKK
DDDLLLLDLDDLLLLDDDDDDLDLLL
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCFGNKKGHMJJK
AEFBJLBGMHPLNMDBNGKFEDGHGK
AAPHBAJICGAJIPACGEKECILFBK
AFLFAKMIEHAAAEOMLEJOOFIKIK
DDDLLLLDLDDLLLLDLDDDDLDLLL
73
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING
PARAMETERS
AUTOSCAN HARDWARE TRIGGER
Disabled
Enabled
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBFHIK
AKCBPJCJGIIJCMCEGOJNEKCHNK
AEFBJLBGMHPLMOHHHCAIHBIEGK
AAPHBAJIDCAJIFGOAAKEOHBFDK
AHKFAPJLGOGCEACIDCMMAEDLLK
DLDLLLLDDDLLLLLDLDDDDLDLDL
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHHEIK
AKCBPJCJGIIJCMCEHPKBOFJJLK
AEFBJLBGMHPLMJADIHHENHDFGK
AAPHBAJICBEONMMBONOIIPHHFK
AGKFAKICKIFEOKGNJHLAINEKJK
DLDLLLLDDDLLLLLDDDDDDLDLDL
AUTOSCAN ILLUMINATION SYSTEM
Disabled
Enabled
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNNLJFPFJK
AEFBJLBGMHPLMMEPFIPGDKBGGK
AAPHBAJICCEJEMGDOHILIDKDFK
AGKFAPLBAGNKCCJLJGBIMBEJLK
DDDLLLLDLLLLLLLDDDLDDLDLDL
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGMOHDKELPK
AEFBJLBGMHPLMLDLKNIKJMKHGK
AAPHBAJIDBAOBFMMAKMHOLMBDK
AHKFAKKIMAOMIINODDGEEIDIJK
DDDLLLLDLLLLLLLDLDLDDLDLDL
The following commands can be activated only when One Code per
Scan is enabled.
NOTE
SAFETY TIME
Disabled
Enabled
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBDHIK
AKCBPJCJGIIJCMCFGPNJLFMNJK
AEFBJLBGMHPLNKCKDNPHGJJHGK
AAPHBAJIDFGLNFMAGPFCDBKFHK
AEKFAJIJKJCIIFOLICNICOFJIK
DDLLLDLDDLLLLLLDDDLDDLDLLL
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHBEIK
AKCBPJCJGIIJCMCFHOOFBKHDPK
AEFBJLBGMHPLNNFOMIILMPCGGK
AAPHBAJICGCMIMGPICBOFJMHBK
AFKFAMJAGPBOCPKOCHKEKHCIKK
DDLLLDLDDLLLLLLDLDLDDLDLLL
Valid only with software trigger or
autoscan enabled.
See par. 5.4.1 for details.
SAFETY TIME DURATION
Set Duration
APCOFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEAHIK
AKCBPJCJGIIJCMCFHPKMDPJLLK
AEFBJLBGMHPLNOGKLEGCNHNGGK
AAPHBAJJDFEMPNPJOPBNJHLFFK
AHKFAIJABNLAGNIDIJBIALLJIK
DLDLLDLDDLDLLLLDLLLDDLDLDL
Read
a
number in the range
01-99, where 01 corresponds to
100 ms and 99 to 9.9 seconds.
74
Enter Cradle Configuration
Exit and Save Cradle Configuration
AOAIGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAGHIK
AKCBPJCJGIIJCMCEGMNGOBKBJK
AEFBJLBGMHPLMPEEEJKEBPIHGK
AAPHBAJJCHEGKKELMEFNPDJFFK
AHLFBINLDNIMKHJDEHLCADAJLK
DDDDLDDLLDDLLLLDDDDDDLDLDL
AOAICMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGAHIK
AKCBPJCJGIIJCMCEGJKPBHPLLK
AEFBJLBGMHPLNIHAENDLMGFEGK
AAPHBAJJDDGHFLHEBHKCGLFFHK
AELFBJOABCEOENLELBPIIGNLLK
DLLDLDDLDLLLLLLDDDLDDLDLLL
CAPTURE IMAGE
CAPTURE IMAGE
In order to capture an image, you should read one of these codes (for further details
see par. 2.3), then point at the image subject and pull the trigger. The image will be
captured and sent to the host PC according to the Preset Configuration.
Capture Image using Preset 1
Capture Image using Preset 2
AMHOHNBOHNGNENEIEPANHOGOCK
AHLLMBIMDKEOFMHMLJAKEAGHJK
AKCBPJCJGIIJCMCFGNOHPCPFPK
AEFBJLBGMHPKMJAIMKEHDCDFGK
AAPHBAJICFDBLOPJLLLDINFJHK
AGLFAMIDGOMEEPCBGGNAIGCKIK
DLDLLLLLDDLLLLLDLLDDDLDLLL
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJOBIMDKEOFMHMLJALEBAHJK
AKCBPJCJGIIJCMCEGKLDJDCHNK
AEFBJLBGMHPLMMDJHFAKOIPGGK
AAPHBAJIDEFNILIMEJKHDCCJHK
AEKFAPIEJAFCCKBLOMCOGKEJLK
DDDLLLLLDLDLLLLDDDDDDLDLDL
Capture Image using Preset 3
Capture Image using Preset 4
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJMBIMDKEOFMHMLJAKEEHGJK
AKCBPJCJGIIJCMCEHMJAAMGPPK
AEFBJLBGMHPLNJAFIAEKDLGHGK
AAPHBAJIDBCENNFBMABFEPANDK
AHLFAPLLBHMECODCDJBCENMLLK
DLDLLLLLDLLLLLLDDLDDDLDLDL
AMHOHNBOHNGNENEIEPANHOGOCK
AHJLOBIMDKEOFMHMLJALEHAFJK
AKCBPJCJGIIJCMCEGMPKJGGNLK
AEFBJLBGMHPLNMCMJLMHOEAGGK
AAPHBAJJDCFDMMNDJIGDNFCBDK
AHKFAPPKGLEEMKLOEBLAEPPKIK
DDLLLLLLDDLLLLLDLDDDDLDLDL
75
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
ADVANCED IMAGE
CAPTURE
Image Preset 1
Basic Configuration
IMAGE FORMAT – PRESET 1
JPEG Format
TIFF Format
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDCHIK
AKCBPJCJGIIJCMCEGPNOGGANPK
AEFBJLBGMHPLMKFBNBGPNBOGGK
AAPHBAJIDCDIINDPLNNMBPHDDK
AHKFAKLKHBAAABKDCLIOAJKKKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCFHJJFOEPPLK
AEFBJLBGMHPKNKCFADPHJNHEGK
AAPHBAJJCGHAIINNOCMNPGINHK
AEKFAJNJCIDAGMOLPMOOEMFKLK
DDDLLLLDLDLLLLLDLLDDDLDLLL
RESOLUTION – PRESET 1
Full Resolution (1280 x 1024)
Half Resolution (640 x 512)
APCNCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCFGNKEBGGBNK
AEFBJLBGMHPLMPBNAOONDMMFGK
AAPHBAJIDBDPBNJNLHLPBDKHDK
AHKFAPIJNPIOMJFFCKCGEFKJIK
DLDLLLLDDLLLLLLDDLLDDLDLLL
APCNCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGCHIK
AKCBPJCJGIIJCMCFHMJILJNPLK
AEFBJLBGMHPLMIGJPLJBJKHEGK
AAPHBAJICCHIEEDCFKPDHLMFFK
AGKFAKJABJLIGDBAIPFKMMNIKK
DLDLLLLDDLLLLLLDLLLDDLDLLL
76
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
JPEG QUALITY FACTOR – PRESET 1
JPEG Quality Factor
APCNBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEGGHIK
AKCBPJCJGIIJCMCFHMJMMBLFJK
AEFBJLBGMHPLNMFHPMFHFNEEGK
AAPHBAJJCGBPKPGKFJJDHGMDDK
AGLFAOPAOMPKKNAPKGBMMNPLJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
Set the JPEG compression level
in the range 000-100.
Advanced Configuration
BRIGHTNESS – PRESET 1
Increase
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFDCELK
ADPCPJCJGIIJCMCFHIPPHGLNOK
AIFBJLBGMHPLMJBELBBMIHELKK
AAPHBAJIDEFLCNGDNKIBEPHFDK
AHKFAKONFOAIGBMDPPNIMEPLJK
DLLLLLLDLLDLLLLDDDDDDLDLLL
Read
0-100
a number in the range
Decrease
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFFAHLK
ADPCPJCJGIIJCMCFGJMDNJADIK
AIFBJLBGMHPLMOGAEEGACBPKKK
AAPHBAJICHBMHEMMDHMNCHBHFK
AGKFAPPEJIDOMLIGFKKEENIKLK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read
0-100
a number in the range
CONTRAST – PRESET 1
Increase
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEAHGLK
ADPCPJCJGIIJCMCFHMJOMMJHKK
AMFBJLBGMHPKNMFIBIAGONHKKK
AAPHBAJJDFDKCBCCHIOFJIIFDK
AGLFAPKIGAIMKKMPLPCIEFKIJK
DDLLLLLDDDLLLLLDLDDDDLDLDL
Read
0-100
a
number in the range
77
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Decrease
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEGFFLK
ADPCPJCJGIIJCMCFGNKCGDCJMK
AMFBJLBGMHPKNLCMONHKELMLKK
AAPHBAJJCGHNHIINJFKJPAOHFK
AHLFAKLBKGLKAAIKBKFEMMNJLK
DDLLLLLDDDLLLLLDDDDDDLDLDL
Read
0-100
a
number in the range
COLOR DEPTH – PRESET 1
2 Grey Levels*
16 Grey Levels*
APCNCOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDCFIK
AKCBPJCJGIIJCMCEGLLFECGHJK
AEFBJLBGMHPKNJEKPNMJGHNGGK
AAPHBAJJDFABOEMAFLAAIJDPDK
AHKFAJMLEAHCIHPPHIMCIFEILK
DDDLLLLDDDDLLLLDLDLDDLDLDL
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFAGIK
AKCBPJCJGIIJCMCEHKIJONNJPK
AEFBJLBGMHPKNODOAILFMBGHGK
AAPHBAJJCGEGLNGPLGEMOBFNFK
AGKFAMNCIGEECNLKNNLOAMDJJK
DDDLLLLDDDDLLLLDDDLDDLDLDL
256 Grey Levels
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCFGMMCGPCLLK
AEFBJLBGMHPLMOEKNKCNINPFGK
AAPHBAJIDCAOLIINOJFNAIKDBK
AFKFAPLBNPHEEAPCAKNOEJMJIK
DDDLLLLDDDDLLLLDLDLDDLDLDL
* only for TIFF Images.
78
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Image Preset 2
Basic Configuration
IMAGE FORMAT – PRESET 2
JPEG Format
TIFF Format
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEFIK
AKCBPJCJGIIJCMCFGILJBIOPNK
AEFBJLBGMHPLMKCGHAAHKHEHGK
AAPHBAJJDHECICEMMLNDPHNJDK
AGLFAOJBACJKKNDNJFMKKKPLJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFEEHIK
AKCBPJCJGIIJCMCEHOPCJKBNJK
AEFBJLBGMHPKNKFCKCJPOLNFGK
AAPHBAJICDAKIHKOJEMCBOCHHK
AFLFANPCFLKKMAHFECKKOPALIK
DDLLLLLDDDDLLLLDDDDDDLDLDL
RESOLUTION – PRESET 2
Full Resolution (1280 x 1024)
Half Resolution (640 x 512)
APCNCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGGIK
AKCBPJCJGIIJCMCEGKMDGIIDPK
AEFBJLBGMHPLMPGKKPIFEKGEGK
AAPHBAJJDEEFBCOOMBLAPLANDK
AGLFALKCKMBEGFMLJEGCOGPILK
DLLLLLLDLLDLLLLDLDLDDLDLDL
APCNCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEFIK
AKCBPJCJGIIJCMCEHLPPMHDNJK
AEFBJLBGMHPLMIBOFKPJOMNFGK
AAPHBAJJCHACELEBCMPMJDGPFK
AHLFAOLLGKCCMPIODBBOGPIJJK
DLLLLLLDLLDLLLLDDDLDDLDLDL
JPEG QUALITY FACTOR – PRESET 2
JPEG Quality Factor
APCNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAFIK
AKCBPJCJGIIJCMCEHLPLLPFHLK
AEFBJLBGMHPLNMCAFNDPCLOFGK
AAPHBAJICDGFKABJCPJMJOGJDK
AHKFAKNLJPGAABJBBIFIGOKKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
Set the JPEG compression level
in the range 000-100.
79
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 2
Increase
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFCDGLK
ADHCPJCJGIIJCMCEHILNFHGNKK
AIFBJLBGMHPKNOHJOGBHOHCLKK
AAPHBAJJDFDOKJNCLOLFMBANBK
AEKFAPMIPNNGAGHKOJJACOOJLK
DLLLLLLDLLLLLLLDLLLDDLDLLL
Read
0-100
a number in the range
Decrease
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFEBFLK
ADHCPJCJGIIJCMCEGJIBPINDMK
AIFBJLBGMHPKNJANBDGLEBJKKK
AAPHBAJJCGHJPAHNFDPJKJGPHK
AFKFAKNBDLOAKMDPEMOMKHJIJK
DLLLLLLDLLLLLLLDDLLDDLDLLL
Read
0-100
a number in the range
CONTRAST – PRESET 2
Increase
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEBGELK
ADHCPJCJGIIJCMCEHMNMONEHOK
AMFBJLBGMHPLMLDFEPANINBKKK
AAPHBAJIDEFPKFJDBMNBBGPNBK
AFLFAKINMDFCMNHGKJGAKPLKLK
DDLLLLLDDDDLLLLDDLLDDLDLDL
Read
0-100
a number in the range
Decrease
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEHEHLK
ADHCPJCJGIIJCMCEGNOAECPJIK
AMFBJLBGMHPLMMEBLKHBCLKLKK
AAPHBAJICHBIPMDMPBJNHOJPHK
AELFAPJEAFGEGHDDAMBMCGMLJK
DDLLLLLDDDDLLLLDLLLDDLDLDL
Read
0-100
a number in the range
80
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
COLOR DEPTH – PRESET 2
2 Grey Levels*
16 Grey Levels*
APCNCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCFGMNCDMIFLK
AEFBJLBGMHPKNJDNFMKBBBHHGK
AAPHBAJIDAHLOLLDCNAPGBJFDK
AGLFANOADDOICLGBMGIGCGBJIK
DDLLLLLDLDLLLLLDDLLDDLDLLL
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCFHNOOJDDLNK
AEFBJLBGMHPKNOEJKJNNLHMGGK
AAPHBAJICDDMLCBMMAEDAJPHFK
AHLFAIPJPFNOIBCEGDPKKPGIKK
DDLLLLLDLDLLLLLDLLLDDLDLLL
256 Grey Levels
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFCGGIK
AKCBPJCJGIIJCMCEGLKFBBMJJK
AEFBJLBGMHPLMODNHLEFPLFEGK
AAPHBAJJDHHELHPOJPFCOAAJBK
AELFALJKKMOOOMGMLEJKOKJILK
DDLLLLLDLDLLLLLDDLLDDLDLLL
* only for TIFF Images.
81
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Image Preset 3
Basic Configuration
IMAGE FORMAT – PRESET 3
JPEG Format
TIFF Format
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGOLKODPNNK
AEFBJLBGMHPKNNCEJMGFHFIHGK
AAPHBAJJDHAGHPOFCBFFABMJHK
AELFAILDLOIMIJHEKLHMICFJJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEFAGIK
AKCBPJCJGIIJCMCFHIPBGBAPJK
AEFBJLBGMHPLMNFAEOPNDJBFGK
AAPHBAJICDEOHKAHHOEEOIDHDK
AHLFALNAOHLMOEDMHMBMMHKJIK
DDLLLLLDDDLLLLLDDDDDDLDLLL
RESOLUTION – PRESET 3
Full Resolution (1280 x 1024)
Half Resolution (640 x 512)
APCJGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDCHIK
AKCBPJCJGIIJCMCFGMMAJDJBPK
AEFBJLBGMHPKNIGIEDOHJIKEGK
AAPHBAJJDEABOPEHCLDGANBNHK
AELFANIABAACEBICKKNEMOFKLK
DLLLLLLDLLLLLLLDLDLDDLDLLL
APCJGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFAEIK
AKCBPJCJGIIJCMCFHNPMDMCPJK
AEFBJLBGMHPKNPBMLGJLDOBFGK
AAPHBAJJCHEGLGOIMGHKGFHPBK
AFLFAIJJNGDEOLMHAPKIEHCLJK
DLLLLLLDLLLLLLLDDDLDDLDLLL
JPEG QUALITY FACTOR – PRESET 3
JPEG Quality Factor
APCJFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFEEIK
AKCBPJCJGIIJCMCFHNPIEEEFLK
AEFBJLBGMHPKMLCCLBFNPJCFGK
AAPHBAJICDCBFNLAMFBKGIHJHK
AFKFAMPJCDHGCFNICGOOEGAIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Set the JPEG compression level
in the range 000-100.
82
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 3
Increase
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFACELK
ALPCPJCJGIIJCMCEHNNMGGBPEK
AIFBJLBGMHPKMKFILFKKCKIIKK
AAPHBAJIDACGDMGODKDKODCLBK
AGLFAKOKDCBAOMIKGIMGKDBJKK
DDLLLLLDDLDLLLLDLLLDDLDLLL
Read
0-100
a number in the range
Decrease
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFGAHLK
ALPCPJCJGIIJCMCEGMOAMJKBCK
AIFBJLBGMHPKMNCMEANGIMDJKK
AAPHBAJICDGBGFMBNHHGILEJHK
AHLFAPPDPECGEGMPMNLKCKGIIK
DDLLLLLDDLDLLLLDDLLDDLDLLL
Read
0-100
a number in the range
CONTRAST – PRESET 3
Increase
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEDHGLK
ALPCPJCJGIIJCMCEHJLNNMDFAK
AMFBJLBGMHPLNPBEBMLAEALJKK
AAPHBAJJDBEHDACPJIFODENLBK
AHKFAPKPAMJECHIGCIDGCCEKKK
DLLLLLLDLDLLLLLDDLLDDLDLDL
Read
0-100
a number in the range
Decrease
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEFFFLK
ALPCPJCJGIIJCMCEGIIBHDILGK
AMFBJLBGMHPLNIGAOJMMOGAIKK
AAPHBAJJCCAAGJIAHFBCFMLJHK
AGKFAKLGMKKCINMDINEKKLDLIK
DLLLLLLDLDLLLLLDLLLDDLDLDL
Read
0-100
a number in the range
83
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
COLOR DEPTH – PRESET 3
2 Grey Levels*
16 Grey Levels*
APCJGOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAAGIK
AKCBPJCJGIIJCMCEGKNBMHJHLK
AEFBJLBGMHPLMODPLAMDMDLHGK
AAPHBAJIDADPBGBKMHIJJHIFHK
AELFALMCIPPOAPCIPIDAAOLLIK
DDLLLLLDLDDLLLLDDLLDDLDLDL
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGCFIK
AKCBPJCJGIIJCMCEHLONGICJNK
AEFBJLBGMHPLMJELEFLPGFAGGK
AAPHBAJICDHIEPLFCKMFPPOHBK
AFLFAONLEJMIKFGNFNEMIHMKKK
DDLLLLLDLDDLLLLDLLLDDLDLDL
256 Grey Levels
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEDCHIK
AKCBPJCJGIIJCMCFGNKGOKNLJK
AEFBJLBGMHPKNJDPJHCHCJJEGK
AAPHBAJJDHDAEKFHHFNEBGBJFK
AGLFANLIBAPIMICFIKCMMCDKLK
DDLLLLLDLDDLLLLDDLLDDLDLDL
* only for TIFF Images.
84
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Image Preset 4
Basic Configuration
IMAGE FORMAT – PRESET 4
JPEG Format
TIFF Format
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCGGIK
AKCBPJCJGIIJCMCFGJNNJNBPPK
AEFBJLBGMHPKNNFDDNANADCGGK
AAPHBAJIDCHMHAJGFHFKOJGDHK
AFKFAMJIMNBGCFOKBFDICBAIKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEHGEIK
AKCBPJCJGIIJCMCEHPJGBPONLK
AEFBJLBGMHPLMNCHOPJFEPLEGK
AAPHBAJJCGDEHFHEAIELAAJNDK
AGKFAPPLJECGEIKCMCFIGEPILK
DDDLLLLDLDDLLLLDLLDDDLDLDL
RESOLUTION – PRESET 4
Full Resolution (1280 x 1024)
Half Resolution (640 x 512)
APCJGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBEFIK
AKCBPJCJGIIJCMCEGLKHONHDNK
AEFBJLBGMHPKNIBPOCIPOOAFGK
AAPHBAJIDBHLOADEFNDJOFLHHK
AFKFAJKLGDJIONBMBEJAGNALIK
DLDLLLLDDLDLLLLDDLLDDLDLDL
APCJGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHGGIK
AKCBPJCJGIIJCMCEHKJLECMNLK
AEFBJLBGMHPKNPGLBHPDEILEGK
AAPHBAJICCDMLJJLLAHFINNFBK
AEKFAMLCKFKOEHFJLBOMOEHKKK
DLDLLLLDDLDLLLLDLLLDDLDLDL
JPEG QUALITY FACTOR – PRESET 4
JPEG Quality Factor
APCJFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFHCGIK
AKCBPJCJGIIJCMCEHKJPDKKHJK
AEFBJLBGMHPKMLFFBADFIPIEGK
AAPHBAJJCGFLFCMDLDBFIANDHK
AELFAINCFAOMIJEGJIKKOFFJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Set the JPEG compression level
in the range 000-100.
85
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 4
Increase
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFBDGLK
ALHCPJCJGIIJCMCFHNJOEHMPAK
AIFBJLBGMHPLNNDFOCKBEKOIKK
AAPHBAJJDBEDLINPFOAOGNFDDK
AFLFAPMPJBMOILDDHOIOEJALIK
DDLLLLLDDLLLLLLDDDDDDLDLLL
Read
0-100
a number in the range
Decrease
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFHBFLK
ALHCPJCJGIIJCMCFGMKCOIHBGK
AIFBJLBGMHPLNKEBBHNNOMFJKK
AAPHBAJJCCAEOBHALDECAFDBFK
AELFAKNGFHPICBHGNLPCMAHKKK
DDLLLLLDDLLLLLLDLDDDDLDLLL
Read
0-100
a number in the range
CONTRAST – PRESET 4
Increase
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKECGELK
ALHCPJCJGIIJCMCFHJPPPNOFEK
AMFBJLBGMHPKMIHJELLLCANJKK
AAPHBAJIDACCLEJOPMGKLKKDDK
AEKFAKIKKPEKEADPDOHOMIFIIK
DLLLLLLDLDDLLLLDLDDDDLDLDL
Read
0-100
a number in the range
Decrease
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEEEHLK
ALHCPJCJGIIJCMCFGIMDFCFLCK
AMFBJLBGMHPKMPANLOMHIGGIKK
AAPHBAJICDGFONDBBBCGNCMBFK
AFKFAPJDGJHMOKHKJLACEBCJKK
DLLLLLLDLDDLLLLDDDDDDLDLDL
Read
0-100
a number in the range
86
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED
IMAGE CAPTURE
COLOR DEPTH – PRESET 4
2 Grey Levels*
16 Grey Levels*
APCJGKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFGNLGLJHFJK
AEFBJLBGMHPLMOEIBBKLLFBGGK
AAPHBAJJDFEFBJGJLBIGHPCPHK
AFKFAPOJPMGEKDLGEGHEKNOKLK
DDDLLLLDDDLLLLLDLDLDDLDLLL
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFHMIKBGMLPK
AEFBJLBGMHPLMJDMOENHBDKHGK
AAPHBAJJCGACEAMGFMMKBHENBK
AEKFAKPADKFCAJPDODAICEJLJK
DDDLLLLDDDLLLLLDDDLDDLDLLL
256 Grey Levels
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEGKMBJEDJLK
AEFBJLBGMHPKNJEIDGEPFPDFGK
AAPHBAJIDCEKEFCEADNLPOLDFK
AHKFAJJDGDGCGELLDEGIGBGLIK
DDDLLLLDDDLLLLLDLDLDDLDLLL
* only for TIFF Images.
87
POWERSCAN® D8530
4.3 ADVANCED DATA FORMAT
Advanced data format has been designed to offer you complete flexibility in changing
the format of barcode data before transmitting it to the host system.
Up to 5 advanced code management formats can be defined by completing the four
given procedures following the desired order:
−
−
−
−
Format Definition
Mismatch Result
Enable/Disable Format
Match Conditions
The formats defined will be restored to default values when reading the general
"Restore Default" code given in par. 5.5.
AMHKHPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECFEIK
AKCBPJCJGIIJCMCEGLLJGOFLPK
AEFBJLBGMHPLMOFLCOIFHHOHGK
AAPHBAJJDGFPAKHBBIFEKNCFFK
AEKFBMPJNBJIONFLOAAKACLIIK
DLLDLDLLDLLLLLLDDLLDDLDLLL
Read the Enter Configuration
Command
Define Format
1, 2, 3, 4, or 5 (par. 2.14.1)
Choose the method and define
the format
Method 1
Extract information from
barcode (page 89)
Method 2
Manipulate barcode data
(page 94)
YES
Define another?
Enable or Disable the Format
Define Mismatch Result
(see par. 2.14.3)
(see par. 2.14.4)
Define one or more Match
Conditions (par. 2.14.2)
AMHKDPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEDEIK
AKCBPJCJGIIJCMCEGOMAJIABNK
AEFBJLBGMHPLNJGPCKBKKODEGK
AAPHBAJJCCHOPLEOMLKLDFOFHK
AHKFBNMCPOFKAHHMBGEAIHGKIK
DDDDLDLLLDDLLLLDDLDDDLDLDL
Read the Exit and save
Configuration Command
88
CONFIGURATION USING CODE SYMBOLS
4.3.1
Format Definition
FORMAT DEFINITION
STEP 1
Define Format 1
Define Format 2
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAFGIK
AKCBPJCJGIIJCMCFGLIBLHNBJK
AEFBJLBGMHPLNODFHCIGIAPGGK
AAPHBAJJCEANJLPCFANLOLDLDK
AGLFAONBHJFAIFILILDKIIAKJK
DDLLLDLDLLLLLLLDDDDDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFFEIK
AKCBPJCJGIIJCMCEHNMKDFCDNK
AEFBJLBGMHPKMOEBKABOMMGEGK
AAPHBAJIDAEFJOBAAPMKACMFHK
AFLFANLCCAGAOIMDFMFKMNPKIK
DDLLLDLDLLLLLLLDLDDDDLDLDL
Define Format 3
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCEGIILFOFHLK
AEFBJLBGMHPLNKHIDJEMFICFGK
AAPHBAJIDAHLABGEHHFOHDBFHK
AGKFAMMMBIDCEBNPMOPCMPJIJK
DDDLLDLDLLLLLLLDLDLDDLDLLL
Define Format 4
Define Format 5
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCFHOMANMKFPK
AEFBJLBGMHPKMKAMOLNEBELHGK
AAPHBAJJCEDDAEIGCIEPJKOLDK
AFKFAPKPEBACCMJHBJJCIKGIIK
DDDLLDLDLLLLLLLDDDLDDLDLLL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCFGPPMHDBLJK
AEFBJLBGMHPKMNHIBOKILCAGGK
AAPHBAJJDHHEFNCJMFADPCIJFK
AEKFAKLGIHDEIGNCLMOOADBJKK
DDDLLDLDLLLLLLLDLDLDDLDLLL
89
POWERSCAN® D8530
STEP 2
FORMAT DEFINITION
Method 1 - Extracting Information from Barcode
Method 1 allows extracting one or more fields by position or by characters from the
decoded barcode. These fields are sent to the host computer as data of the output
message, while the characters not included in the formatting procedure will be
deleted and not inserted in the output message.
These two kinds of extraction (by position / by character) can be used together within
the same format definition; furthermore, it possible to complete the new format by
adding a new string of characters. Since there is no fixed rule, the procedures can be
freely put in order and repeated according to your requirement.
The only limit is determined by the size of the internal reserved memory used to
define the format.
B e g in F o rm a t
D e fin itio n 1 , 2 , 3 , 4 ,
o r 5
A d d
A d d
E xtra c tio n b y
E xtra c tio n b y
A d d n e w
P o s itio n
C h a ra c te rs
s trin g
A d d
A d d
A d d
90
CONFIGURATION USING CODE SYMBOLS
Example
Method 1 Extracting Information from Barcode
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Extract field by position + Add new string +
Extract field by character + Add new string
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 32 + 31 +
+
+
Field Extraction by Position
Field Ending Position
Field Starting Position
End Selection
Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 1 +
+ 3 +
+
+
Add New String
String
End
character(s)
String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 32 + 31 +
+
+
Field Extraction by Character
Field Starting
Characters
Field Ending
Character
End Selection Including
Starting and Ending Characters
Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 4F + 47 +
+ 72 +
+
+
Add New String
String
End
character(s)
String
End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ 32 + 31 +
+
Output message: <21DAT21OGICpr21>
91
POWERSCAN® D8530
FIELD EXTRACTION BY CHARACTER
a)
b)
c)
Define Field Starting Character(s)
Field Starting Character(s)
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the starting character(s) of the field to be
extracted. Valid values are in the range 00-7F.
Define Field Ending Character(s)
Field Ending Character(s)
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the ending character(s) of the field to be
extracted. Valid values are in the range 00-7F.
Field Delimiter Selection
Include Start/End
Characters
Discard Start/End
Characters
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
ANGKGKAKHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGHGIK
AKCBPJCJGIIJCMCFGLMLMKGDJK
AEFBJLBGMHPKMLGFPEPOPDMEGK
AAPHBAJJDFDNAIMLIINFBCODDK
AHKFBIKGJAGEKLGKEKMEIMAIKK
DDLDLDLLLLDLLLLDLLLDDLDLDL
OR
d)
EITHER
Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
−
To add other fields selected by characters read the
code and repeat this procedure from step a for each
field to be selected;
−
−
To add a new string of characters read the code and
follow the procedure described on page 94;
To add the procedure selecting new fields by
position read the code and follow the description
given on page 93.
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
92
CONFIGURATION USING CODE SYMBOLS
FIELD EXTRACTION BY POSITION
a)
b)
Define Field Starting Position
Field Starting Position
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
Read
a
number corresponding to the field starting
position.
Define Field Ending Position
Field Ending Position
Last Position
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
AODIHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKECEFKK
AOJDDBCJGIIJCMCFGJOBMJMDAK
AIFBJLBGMHPKNPHCPMPIMIMIOK
AAPHBAJJDFBPALCKEKLEJMBHFK
AELFAMLGJAMMMEIECNBGEMEIIK
DLDLDLLDDLDLLLLDLDLDDLDLDL
OR
Read a number corresponding
to the field ending position.
Read this code to set the field
ending position to the last
position of the code:
c)
d)
End Field Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
Read the code to end the field selection.
EITHER
Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
−
To add other fields selected by position read the
code and repeat this procedure from step a for each
field to be selected;
−
−
To add a new string of characters read the code and
follow the procedure described on page 94;
To add the procedure selecting new fields by
characters read the code and follow the description
given on page 92.
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
93
POWERSCAN® D8530
ADD NEW STRING
Define New String
a)
String Character(s)
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the character(s). Valid values are in the range
00-7F.
b)
End String
End String
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the code to end the string defined in step a.
c)
EITHER
Add Procedure
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
−
−
To add the procedure extracting fields by characters
follow the steps given on page 92;
To add the procedure extracting fields by position
follow the steps given on page 93;
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
94
CONFIGURATION USING CODE SYMBOLS
Method 2 - Manipulating the Barcode Data
Method 2 allows modifying the barcode data by means of one of the following
procedures:
−
−
−
−
String insertion;
String deletion;
String substitution;
Field deletion.
Once the data has been modified, it is sent to the host computer as data of the output
message.
Unlike Method 1 this method does not allow associating different procedures
together. This means that each format definition corresponds to a single procedure.
Despite this, it possible to add a new string of characters to the beginning or ending
part of the formatted barcode.
The only limit is determined by the size of the internal reserved memory used to
define the format.
95
POWERSCAN® D8530
STRING INSERTION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Insert String
Add
YES
Add String?
Add new
Add
String
NO
End Format Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Insert String
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 31 + 37 +
+
+
String Insertion Procedure
String Position
Insert String
End Selection
End Format
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+
+ 31 + 32 + 33 +
+ 5
+
Output message: <17DATA123LOGICproduct>
96
CONFIGURATION USING CODE SYMBOLS
String Insertion Procedure
a)
b)
c)
d)
Insert String
Insert String
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters to be inserted. Valid values are
in the range 00-7F.
Define String Position
String Position
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
Read a number corresponding to the string position within
the barcode.
End Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
Read the code to end the field selection.
EITHER
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 105;
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
97
POWERSCAN® D8530
STRING DELETION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Delete String
Add
Delete
YES
Add String?
Add new
Add
String
NO
End Format Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First String + Delete Second String + Add New
String.
String Deletion Procedure
Delete String
Loop
End Selection
Add
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 4C +4F +
+ 6F +64 +
+
+
Add New String
String
Character(s)
End String
End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ 33 + 31 +
+
Output message: <DATAGICpruct31>
98
CONFIGURATION USING CODE SYMBOLS
String Deletion Procedure
a)
b)
c)
d)
Delete String
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the string character(s) to be deleted. Valid
values are in the range 00-7F.
(optional)
Select Other Strings to be Deleted
Loop
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
Read the code above and repeat the procedure from step
a.
End Selection
End Selection
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the code to end the selection.
EITHER
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 105;
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
99
POWERSCAN® D8530
STRING SUBSTITUTION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Substitute String
Add
YES
Add String?
Add new
Add
String
NO
End Format Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + String substitution + Add new string.
Add New String
String Substitution Procedure
String
Character(s)
Substitute
String
Substituting
String
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+ 34 + 33 +
+
+
+
41 +
String Substitution Procedure
End
Add New String
String
Character(s)
End
String
End
Format
Add
Selection
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ 37
+
+
+ 34 + 33 +
+
Output message: <43D7T7LOGICproduct43>
100
CONFIGURATION USING CODE SYMBOLS
String Substitution Procedure
Define String to be Substituted
a)
b)
c)
d)
Substitute String
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters of the string to be substituted.
Valid values are in the range 00-7F.
Define Substituting String
Substituting String
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the characters of the substituting string. Valid
values are in the range 00-7F.
End Selection
End Selection
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
Read the code to end the selection.
EITHER
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 105;
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
101
POWERSCAN® D8530
FIELD DELETION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Delete Field
Add
Delete
YES
Add String?
Add new
Add
String
NO
End Format Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First Field + Delete Second Field + Add New String.
Field Deletion Procedure
Delete
1st Field Starting Character
1st Field Ending Character
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+
+ 41 +
+ 4C + 4F +
Field Deletion Procedure
2nd Field Starting Character
End Selection
2nd Field Ending Character
Loop
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+ 70 + 72
+
+
+
+
+
Field Deletion Procedure
End Selection
Add New String
End String
Add
String Character(s)
End Format
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
AEFBJLBGMHPLMJGBFHKLALDGGK
+ 75 +
+
+
+ 35 + 31 +
+
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Output message: <DGICct51>
102
CONFIGURATION USING CODE SYMBOLS
Field Deletion Procedure
a)
b)
c)
d)
e)
Delete Field
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
Read the code to enable the command deleting the field.
Define Field Starting Character
Field Starting Character
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values are in the
range 00-7F.
Define Field Ending Character
Field Ending Character
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
Read the Hex value from the Hex/Numeric table
identifying the ending character/s. Valid values are in the
range 00-7F.
End Field Selection
End Selection
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
Read the code to end the field selection.
(optional)
Select Other Fields to be Deleted
Loop
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
Read the following code and repeat the procedure from
step b for each field to be deleted.
103
POWERSCAN® D8530
f)
EITHER
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and
follow the procedure described on page 105;
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
104
CONFIGURATION USING CODE SYMBOLS
ADD NEW STRING
a)
b)
Define New String
String Character
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values are in the
range 00-7F.
End String and Define Procedure
End String Plus Procedure
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHDFIK
AKCBPJCJGIIJCMCFHLOLBOBPNK
AEFBJLBGMHPKMMDHGPDFPODGGK
AAPHBAJICGFKCICAIFKLCABPDK
AHKFBKNCOEFKAKAABKBIIHHKLK
DLLDLDDLDLDLLLLDLLLDDLDLDL
Read the code to end the string selection and continue
defining a new procedure belonging to Method 1.
OR
End String and Format
End String & Format
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFBEIK
AKCBPJCJGIIJCMCFGOPKHDHBLK
AEFBJLBGMHPLNIFDFNHOMPFHGK
AAPHBAJJDFAOLDEBEDPLAFIDBK
AGLFBMNPAAFGGKBFFMECGOAIJK
DLLLLLDLLDLLLLLDLLLDDLDLDL
Read the code to end the string and the format definition.
105
POWERSCAN® D8530
4.3.2
Match Conditions
By setting one or more of the following conditions it is possible to select the codes to be
formatted. Follow the given steps to define the desired condition.
MATCH WITH PREDEFINED SUBSTRING
Define Matching Substring
Match with Substring
AOCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFABGIK
AKCBPJCJGIIJCMCFGLIFMPLLLK
AEFBJLBGMHPLMKALHFEAEHMGGK
AAPHBAJICAGKHAKKFDLLOGDNFK
AGKFAKLBIMBCELJEKCHMIJCJKK
DLDLLDLDLDLLLLLDDLLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of characters defining the matching
string in the range 00-10;
3. read the corresponding character as Hex value from
the Hex/Numeric table identifying the substring
character/s. Valid values are in the range 00-7F.
(optional)
Define Substring Position
Matching Substring Position
AOCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCEHIMDBAGJPK
AEFBJLBGMHPLMIDDFPLOAMFEGK
AAPHBAJIDACKLJKHLEJEICILDK
AHKFAKJLOEKKCJCHAGKIEMFLKK
DDDLLDLDDLLLLLLDLLDDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number corresponding to the substring
position in the range 0-255;
AND/OR
MATCH CODE LENGTH
Define Code Length
Match Code Length
AOCLFLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDBHIK
AKCBPJCJGIIJCMCEHPOLDEPHNK
AEFBJLBGMHPLMJEHMIMMPOKEGK
AAPHBAJJDEGGOAGMNCEOLPDLHK
AGKFAIJFBNPEGAOAPPFAGNIILK
DLDLLDLDLDDLLLLDLDDDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number in the range 0-255;
106
CONFIGURATION USING CODE SYMBOLS
AND/OR
MATCH SYMBOLOGY
Define Code Symbology
Match Symbology
AOCLFLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCFGMKNOLCFJK
AEFBJLBGMHPLMLHPOCDCLFDGGK
AAPHBAJJCECGCJGBDFGBNLINBK
AHKFAILPHFEMACFDFLIEKIPKLK
DDDLLDLDDLDLLLLDDDLDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of the matching code symbologies in
the range 0-4;
3. select the Datalogic Standard Code Identifier from
the Code Identifier Table in Appendix C.
107
POWERSCAN® D8530
4.3.3
Format Enable/Disable
Format 1
Format 2
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFFGIK
AKCBPJCJGIIJCMCEHIMHGIADNK
AEFBJLBGMHPLNMANFIHIMLGEGK
AAPHBAJJDEENFCPPLHPEIPINFK
AHLFAOPLBBOIOHDICPOOENHIJK
DLLLLDLDDDLLLLLDLDLDDLDLDL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAFEIK
AKCBPJCJGIIJCMCFGOIMOKPBJK
AEFBJLBGMHPKMMHJIKOAIHPGGK
AAPHBAJICAAFFHBNOIOFGGHDBK
AELFANJIEINIIKHAPIIOAIIIIK
DLLLLDLDDDLLLLLDDDLDDLDLDL
0
1
= disabled
= enabled
0
1
= disabled
= enabled
Format 3
Format 4
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEECFIK
AKCBPJCJGIIJCMCFHLMNIBIFPK
AEFBJLBGMHPLNIEABDLCBDLHGK
AAPHBAJICADLMIGJJAHBBHKDBK
AHKFAMOGHAIKCDGMGKCGAKOKJK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCEGNIGADHHLK
AEFBJLBGMHPKMIDEMBCKFPCFGK
AAPHBAJJDEHDMNILMPGAPOFNFK
AEKFAPIFCJLKEOCELNEGEPBKIK
DLDLLDLDDDLLLLLDLDDDDLDLLL
0
1
= disabled
= enabled
0
1
= disabled
= enabled
Format 5
Disable All Formats
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCEHMLKKMMJNK
AEFBJLBGMHPKMPEADEFGPJJEGK
AAPHBAJJCHDEJECECCCMJGDPDK
AFKFAKJMOPIMOEGBBIDKMGGLKK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDHFIK
AKCBPJCJGIIJCMCEGJPLMHLNLK
AEFBJLBGMHPLNLHJKNAEGNNFGK
AAPHBAJJCHAKALFAFKLIOHOPDK
AGLFALOCNHNOENHNIKJCMEAJLK
DLLLLDLDDDLLLLLDDDLDDLDLDL
0
1
= disabled
= enabled
108
CONFIGURATION USING CODE SYMBOLS
4.3.4
Mismatch Result
The result of each format may be set in case the match conditions previously
selected are not satisfied.
Once the desired formats have been enabled and a code has been read, the results
corresponding to each format will be concatenated together and transmitted in the
output message. For this reason, it is strongly advised to set the mismatch result for
each format.
Example
Decoded Code: <DATALOGICproduct>
Format definition:
Format
Enable/Disable Match Condition
Function
Mismatch Result
Format 1
Enabled
Code having a length Select field from No string
of 16 characters
/
position1
position3
/
to
Format 2
Format 3
Disabled
Enabled
/
Code having a length Substitute string Unformatted read
of 25 characters
"ab" with string code
"12"
Format 4
Format 5
Enabled
Enabled
Code
substring
position 2
Code belonging to the Delete
PDF417 symbology
having
"AT"
the Insert
in "789" in position code
7
string Unformatted read
string Unformatted read
code
"DA" and "pr"
Output message: <DATDATALOGICproductDATALO789GICproductDATALOGICproduct>
Format 1 Format 3 Format 4 Format 5
Define Mismatch Result
Mismatch Result
AOCLFLHODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFHPJPBJONNK
AEFBJLBGMHPKMJGONHLFIIIHGK
AAPHBAJJCDBDNKDEDGEINLGHBK
AFLFAMLJPMLKOLLPNDLGCBAIIK
DLDLLDLDDLLLLLLDDDLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. 0 = empty string as output
1 = unformatted read code as output.
109
POWERSCAN® D8530
5 REFERENCES
5.1 RS-232 – USB COM
5.1.1
ACK/NACK Protocol
The transmission protocol takes place between reader and Host. Once the reader
has read a code, it emits a good read beep and passes its data to the Host.
When ACK/NACK is disabled, there is no control from reader to Host transmission.
When ACK/NACK is enabled, the Host sends an ACK character (06 HEX) in the case
of good reception or the NACK character (15 HEX) requesting re-transmission, in the
case of bad reception.
If the reader does receive an ACK, no signal will be emitted; whereas, if it does not
receive an ACK or NACK, it will emit a wrong reception tone after a few seconds.
PowerScan® D8530 reader cannot read barcodes while waiting for the
Host response.
NOTE
5.1.2
RX Timeout
This parameter can be used to automatically end data reception from the Host after
the specific period of time.
If no character is received from Host, after the timeout expires, any incomplete string
(any string not terminated by <CR>) is flushed from the device buffer.
110
REFERENCES
5.2 USB KEYBOARD
5.2.1 Keyboard Speed
This parameter manages the transmission speed of characters to the Host. A fast
Keyboard Speed allows rapid transmission of a great amount of characters (for
example 2D codes), but it might not be compatible with slower systems.
5.3 CODE SELECTION
5.3.1
Issue Identical Codes
This parameter manages the code transmission when more than one code
containing the same information is detected in a single scan.
All identical codes are transmitted to the Host when the parameter is enabled; if
disabled, only one of the identical codes is sent.
5.4 READING PARAMETERS
5.4.1
Safety Time
Safety time prevents the device from immediately decoding the same code more
than once. A timeout can be set up to 9.9 seconds before the decoder will accept the
same code. Reading is immediate if the code changes.
The safety time parameter is not applicable when all codes per scan is enabled or
when setting one read per cycle in normal (hardware) trigger operating mode.
111
POWERSCAN® D8530
5.5 CONFIGURATION EDITING COMMANDS
The following commands carry out their specific function and do not require reading
the Enter or Exit and Save Configuration codes.
Command
Description
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Restore PowerScan® D8530 reader default
configuration.
AMHKGPBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECBEIK
AKCBPJCJGIIJCMCEGNOKAKPHJK
AEFBJLBGMHPKMKEPKAKIOABEGK
AAPHBAJICFGFIBIPPOECDKIJBK
AFKFBMIKBFKGOMKNNGLKGNNIKK
DLLDLDLLDDLLLLLDDLDDDLDLLL
Transmit the PowerScan® D8530 reader
Software release.
AMHOGPBOFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEGNLFCLIPJK
AEFBJLBGMHPKMKFLEFBNBOKHGK
AAPHBAJIDGHLDGOMCOHJGAAFDK
AGKFALIMCNPOKGIEIBDIOGHIKK
DLLLLLLLDDDLLLLDLLLDDLDLDL
Transmit the PowerScan® D8530 current
configuration in ASCII format to Host.
AMHOHMEMHNGNENEIEPANHOGOCK
AHPBIBAMDKEOFMHMLJALFHGFJK
AKCBPJCJGIIJCMCEHJIPFPFLNK
AEFBJLBGMHPLNOBPKFGHKGAGGK
AAPHBAJIDBEDNCGFJDBLCCBHFK
AELFAJJEFKLIMPLCLLEIOMIJLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
Transmit the PowerScan® D8530 current data
format configuration in ASCII format to Host.
112
POWERSCAN® D8530
QR
PDF417
DataMatrix (Normal)
DataMatrix (Inverse)
114
MAINTENANCE
7 MAINTENANCE
You do not need to perform regular preventative maintenance on the PowerScan®
D8530 reader.
Do not try to open the case, because you might damage the interior electronic
components and such action voids the warranty.
You can keep your reader in good operating condition by:
•
•
periodically cleaning the reading window using water or a mild detergent solution
and a soft cloth or tissue.
watching for any damage to the housing.
Do not use abrasive cleaning agents on the reader's window to
avoid scratches. Do not use solvents on the housing or window to
avoid damage. Do not submerge the reader in water. It is not
waterproof.
CAUTION
115
POWERSCAN® D8530
8 TECHNICAL FEATURES
PowerScan® D8530 Family Common Features
Electrical Features
Operating Voltage
Power Consumption
5 to 30 V
@ 5V
(Typical)
(Typical)
600 mA
100 mA
@30V
Communications Features
Standard Interfaces
RS-232, Keyboard emulation AT IBM, USB COM emulation, USB
Keyboard emulation
Proprietary Interfaces
Environmental Features
Operating Temperature
Storage Temperature
Humidity
USB Bulk, USB Generic HID
-10° to +55° C (+14° to +131° F)
-20° to +70° C (-4° to +158° F)
0 to 95% NC
2 m / 6.6 ft (over 50 drops to concrete)
IP65
Drop Resistance
IP Sealing
Mechanical Features
Dimensions
20.8 x 6.6 x 11 cm / 8.1 x 2.6 x 4.3 in
295 g / 10.4 oz (without cable)
Weight
Decoding Capability
1D
Interleaved 2 of 5, Code 39, Code 32, Code 128, EAN 128,
Code93, UPC/EAN/JAN, Codabar, GS1 DataBar™
2D
Aztec, PDF417, Micro PDF417, Macro PDF417, Maxicode,
DataMatrix (ECC200), QR, Composite Codes
Postal Codes
PLANET, Japan Post, Australia Post, KIX Code, Royal Mail Code
(RM4SCC)
Imaging Options
Image
1280x1024 pixels (Full Resolution)
640 x 512 pixel format (Half Resolution);
JPEG, 256 gray levels
Graphic Format
TIFF, 2, 16, 256 gray levels
Optical Features
Sensor
1280 x 1024 pixel element, 2D CMOS Array
LED array
Illuminator
Wavelength
In the range 630 ~ 670 nm
Class 1 to EN 60825-1
LED Safety Class
Aiming System
Wavelength
Visible Laser Diode
650 nm
Laser Safety Class
Class 2 - EN 60825-1; Class II CDRH
Ambient light
0 - 100000 lux
116
TECHNICAL FEATURES
PowerScan® D8530™
Optical Features
Focus distance
140 mm
Field of view
28° (H) x 23° (V)
Horizontal field of view at
distance (d) in mm
Vertical field of view at distance
(d) in mm
0.52d + 15
0.42d + 12
Max Resolution
Linear codes -
mm (mils)
PDF 417 – mm
(mils)
Datamatrix – mm
(mils)
0.10 (4 mils)
0.10 (4 mils)
0.17 (6.6 mils)
Depth of field*
1D (linear):
X-dimension
mm (mils)
DOF
cm (in)
Code39
0.13 (5)
0.5 (20)
0.33 (13)
7.5 to 15.5
(2.95 to 6.10)
5.5 to 36.5
(2.17 to 14.37)
5.0 to 27
EAN13
(1.97 to 10.63)
2D:
X-dimension
mm (mils)
DOF
cm (in)
PDF417
0.13 (5)
0.25 (10)
0.19 (7.5)
0.25 (10)
0.19 (7.5)
0.25 (10)
8.0 to 18.5
(3.15 to 7.28)
4.0 to 25.5
(1.57 to 10.04)
QR
8.0 to 16.5
(3.15 to 6.5)
7.0 to 19.5
(2.76 to 7.68)
DataMatrix
8.0 to 16.5
(3.15 to 6.5)
7.0 to 19.5
(2.76 to 7.68)
Skew
±40°
±35°
360°
15%
Pitch
Rotation
Print Contrast (Min.)
* Reading distances are measured from the nose of the reader.
NOTE: Typical performance at 20ºC / 68ºF on high quality barcodes.
117
POWERSCAN® D8530
PowerScan® D8530™ HD
Optical Features
Focus distance
Field of view
65 mm
27° (H) x 22° (V)
Horizontal field of view at
distance (d) in mm
0.50d + 13
Vertical field of view at distance
(d) in mm
0.40d + 10
Max Resolution
Linear codes -
mm (mils)
PDF 417 – mm
(mils)
Datamatrix – mm
(mils)
0.05 (2 mils)
0.08 (3 mils)
0.10 (4 mils)
Depth of field*
1D (linear):
X-dimension
mm (mils)
DOF
cm (in)
Code39
0.08 (3)
0.13 (5)
4.5 to 8.0 (1.77 to 3.15)
3.5 to 9.5 (1.38 to 3.74)
6.0 to 18.5 (2.36 to 7.28)
5.0 to 14 (1.97 to 5.51)
0.51 (20)
0.33 (13)
EAN13
2D:
X-dimension
mm (mils)
DOF
cm (in)
PDF417
QR
0.08 (3)
0.13 (5)
5.0 to 8.5 (1.97 to 3.35)
4.5 to 9.5 (1.77 to 3.74)
3.0 to 13.0 (1.18 to 5.12)
5.5 to 7.5 (2.17 to 2.95)
5.0 to 8.0 (1.97 to 3.15)
4.5 to 9.5 (1.77 to 3.74)
5.5 to 7.5 (2.17 to 2.95)
5.0 to 8.0 (1.97 to 3.15)
4.5 to 9.5 (1.77 to 3.74)
±40°
0.25 (10)
0.10 (4)
0.19 (7.5)
0.25 (10)
0.10 (4)
DATAMATRIX
0.19 (7.5)
0.25 (10)
Skew
Pitch
±35°
Rotation
360°
Print Contrast (Min.)
23%
•
Reading distances are measured from the nose of the reader.
NOTE: Typical performance at 20ºC / 68ºF on high quality barcodes.
118
TECHNICAL FEATURES
PowerScan® D8530™ WA
Optical Features
Focus distance
Field of view
115 mm
54° (H) x 45° (V)
Horizontal field of view at
distance (d) in mm
1.04d + 40
0.40d + 10
Vertical field of view at
distance (d) in mm
Max Resolution
Linear codes -
mm (mils)
PDF 417 –
mm (mils)
Datamatrix – mm (mils)
0.13 (5 mils)
0.13 (5 mils)
0.19 (7.5 mils)
Depth of field*
1D (linear):
X-dimension
mm (mils)
DOF
cm (in)
Code39
0.13 (5)
0.51 (20)
0.33 (13)
2.5 to 10.0
(0.98 to 3.94)
1.5 to 32
(0.59 to 12.60)
1.5 to 26.0
EAN 13
(0.59 to 10.24)
2D:
X-dimension
mm (mils)
DOF
cm (in)
PDF417
0.13 (5)
0.25 (10)
0.19 (7.5)
0.25 (10)
0.19 (7.5)
0.25 (10)
3.0 to 10.5
(1.18 to 4.13)
1.5 to 21.5
(0.59 to 8.46)
QR
5.5 to 8.5
(2.17 to 3.35)
3.0 to 12.5
(1.18 to 4.92)
DataMatrix
5.5 to 8.5
(2.17 to 3.35)
3.0 to 12.5
(1.18 to 4.92)
Skew
±40°
Pitch
±35°
360°
15%
Rotation
Print Contrast (Min.)
•
Reading distances are measured from the nose of the reader.
NOTE: Typical performance at 20ºC / 68ºF on high quality barcodes.
119
POWERSCAN® D8530
8.1 INDICATORS
8.1.1
PowerScan® D8530 LED Indicators
The PowerScan® D8530 family uses green LED indicators to signal the following
reader functions:
STATUS
BEHAVIOR
Power ON
At power-on, the LEDs blink briefly,
then light up for 2 seconds to signal
the power supply is present.
Normal Function
The LED lights up after a good
decoding and will switch off only at
the next trigger press.
8.1.2
Beeper
The PowerScan® D8530 basic software provides beeper signals for good/wrong
reading and for indicating errors. Its tone, volume and duration can be directly
configured by using the codes given in the PowerScan® D8530 Reference Manual
available on the website.
The application program can also manage the beeper (User Defined Beeper) when
the reader is controlled by a Host PC. It is possible to activate the beeper by sending
a command from the Host to the reader via the current communication interface.
8.1.3
Good Read Spot
A green Good-Read Spot will be projected in the field of view when the reading is
successful.
120
HOST CONFIGURATION STRINGS
A
HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration
using serial strings sent from the Host.
This method requires the RS-232, USB-Com, USB Bulk or USB Generic HID
interface.
The device configuration can be changed by receiving commands from the Host
through the current interface. When this method is used, the programming sequence
format is the following:
Command
$+
$-
CR
Carriage return character (0D Hex.)
Exit and Save configuration
Character sequence in following tables
Enter configuration environment
Example:
$+ GBB1 GBA1 $- CR
Carriage return character (0D Hex.)
Exit and save new configuration
Beeper tone 1
Beeper low intensity
Enter configuration environment
Each configuration parameter setting removes the condition previously active for that
parameter.
Configuring some configuration commands, such as those of
advanced formatting, through strings may result very complex. For this
reason they are not provided in the following tables but can be
configured by using Datalogic Aladdin™ configuration program or
NOTE
referring to the related section in chapter 4 of this manual.
121
POWERSCAN® D8530
SERIAL CONFIGURATION STRINGS
ENTER/EXIT CONFIGURATION COMMANDS
DESCRIPTION
Enter Configuration
STRING
$+
Exit and Save Configuration
Restore Default
Transmit Software Release
Transmit Device Configuration in ASCII
Save Custom Default
$-
$+$*
$+$!
$?$&
$+$0
$+$1
Restore Custom Default
These commands do not require $-
INTERFACE SELECTION
DESCRIPTION
STRING
CPA0
CPA1
CPA3
CPA4
CPA2
CPA5
RS-232
Standard
WEDGE for IBM AT
USB
USB COM
USB-KBD
USB Bulk
USB Generic HID
RS-232
DESCRIPTION
Baud rate
STRING
DAA00
DAA01
DAA02
DAA03
DAA04
DAA05
DAA06
DAA07
DAA08
DBA0
DBA2
DBA1
DCA0
DCA1
DCB0
DCB1
DDA0
DDA2
DDA1
DDA3
DDB0
DDB1
1200
2400
4800
9600
14400
19200
38400
57600
115200
none
even
odd
7
8
1
2
none
Parity
Data bits
Stop bits
Handshake
RTS/CTS
XON/XOFF
RTS always ON
disabled
enabled
ACK/NACK Protocol
122
HOST CONFIGURATION STRINGS
RS-232 (continued)
DESCRIPTION
FIFO
STRING
DDC0
DDC1
disabled
enabled
RX Timeout
DEB00 - DEB99
DEA00 - DEA99
DEC00 - DEC99
DDB0
Intercharacter Delay
Intercode Delay
Serial Trigger Lock
disabled
enabled
DDB1
Serial trigger Lock/Unlock characters
CQBxx
x = Hex value from 00 to FF
USB
DESCRIPTION
USB-COM
STRING
Handshake
none
UDA0
UDA2
UDA1
UDB0
UDB1
RTS/CTS
XON/XOFF
disabled
enabled
disabled
enabled
ACK/NACK Protocol
FIFO
UDC0
UDC1
RX Timeout
Intercharacter Delay
Intercode Delay
DEB00 - DEB99
UEA00 - UEA99
UEC00 - UEC99
DATA FORMAT
DESCRIPTION
Data Format Restore Default
SYMBOLOGY INDEPENDENT PARAMETERS
STRING
EZ0
Code Identifier
disabled
EAA0
EAA2
EAA1
EAA3
ECA0
AIM standard Code ID
Custom Code ID
Datalogic Code ID
disabled
enabled
no header
Code Length
Set Headers
ECA1
EDA00
one character
two characters
three characters
four characters
five characters
six characters
seven characters
eight characters
EDA01x
EDA02xx
EDA03xxx
EDA04xxxx
EDA05xxxxx
EDA06xxxxxx
EDA07xxxxxxx
EDA08xxxxxxxx
123
POWERSCAN® D8530
DATA FORMAT (continued)
DESCRIPTION
Set Headers
STRING
EDA09xxxxxxxxx
EDA10xxxxxxxxxx
EDB0
nine characters
ten characters
disabled
Headers
enabled
EDB1
Set Terminators
no terminator
one character
two characters
three characters
four characters
five characters
six characters
seven characters
eight characters
nine characters
ten characters
disabled
EEA00
EEA01x
EEA02xx
EEA03xxx
EEA04xxxx
EEA05xxxxx
EEA06xxxxxx
EEA07xxxxxxx
EEA08xxxxxxxx
EEA09xxxxxxxxx
EEA10xxxxxxxxxx
EEB0
Terminators
enabled
EEB1
x, a = HEX values representing an ASCII character.
x = Hex value from 00 to FF
CAMERA CONTROL
DESCRIPTION
Exposure Mode
STRING
FFA1
automatic (entire image)
automatic (central part of image)
automatic for highly reflective surfaces
FFA2
FFA3
124
HOST CONFIGURATION STRINGS
POWER SAVE
DESCRIPTION
Illumination System Power Illumination System OFF
Illumination System ON
STRING
HAA0
HAA1
CODE SELECTION
DESCRIPTION
Disable All Symbologies
STRING
AZA0
Disable All Linear Symbologies
Disable All 2D Symbologies
AXA0
AYA0
Issue Identical Codes
disabled
enabled
AWB0
AWB1
LINEAR SYMBOLOGIES
UPC/EAN/JAN disabled
enabled
AEA0
AEA1
AEB0
AEB1
AEC0
AEC1
ABA0
ABA1
Add-on
disabled
enabled
enabled
disabled
disabled
no ckeck digit control
UPCE extension
Standard
Code 39
ckeck digit control without transmission
ckeck digit control and transmission
disabled
ABA2
ABA3
ABB0
ABB1
ABC0
ABC1
ABDd
ABEd
ABF0
ABF1
ABL0
ABL1
Full ASCII
enabled
Code Len Check disabled
enabled
Minimum Code Length
Maximum Code Length
Start/Stop Char TX enabled
disabled
Code 32
disabled
enabled
d =
a number from the HEX/Numeric Table
d = a number in the range 001-255
125
POWERSCAN® D8530
CODE SELECTION
DESCRIPTION
STRING
LINEAR SYMBOLOGIES
Interleaved 2/5 disabled
ACA0
ACA1
ACA2
ACA3
ACB0
ACB1
ACCd
ACDd
ADA0
ADA1
ADA2
ADA3
ADB0
ADB1
ADCd
ADDd
AAA0
AAA1
AAB0
AAB1
AACd
AADd
AOA0
AOA1
AOB0
AOB1
AOCd
AODd
AFA0
AFA1
AFB0
AFB1
AFCd
AFDd
AMA0
enabled – no check digit control
enabled – check digit control and without transmission
enabled – check digit control and transmission
Code Len Check disabled
enabled
Minimum Code Length
Maximum Code Length
disabled
Codabar
enabled – no check digit control
enabled – check digit control and without transmission
enabled – check digit control and transmission
Code Len Check disabled
enabled
Minimum Code Length
Maximum Code Length
disabled
enabled
Code Len Check disabled
enabled
Minimum Code Length
Maximum Code Length
disabled
enabled
Code Len Check disabled
enabled
Code 128
EAN 128
Code 93
Minimum Code Length
Maximum Code Length
disabled
enabled
Code Len Check disabled
enabled
Minimum Code Length
Maximum Code Length
GS1 DataBar™ GS1
Family
DataBar disabled
Expanded
enabled
DataBar disabled
AMA1
AMB0
GS1
Limited
enabled
disabled
AMB1
AMC0
GS1 DataBar
Omnidirecti
onal
enabled
AMC1
126
HOST CONFIGURATION STRINGS
CODE SELECTION (continued)
DESCRIPTION
STRING
AMD0
GS1
DataBar disabled
enabled
Expanded
Stacked
GS1 DataBar
Stacked
AMD1
AME0
disabled
enabled
AME1
d =
d = a number in the range 001-255
a number from the HEX/Numeric Table
127
POWERSCAN® D8530
CODE SELECTION
DESCRIPTION
STRING
2D SYMBOLOGIES
PDF417
disabled
enabled
Macro PDF417
AGA0
AGA1
AVB0
AVB1
AGB0
AGB1
AHA0
AHA1
AHCe
AHDe
AHE0
unbuffered mode
buffered mode
disabled
Micro PDF417
enabled
DataMatrix
disabled
enabled
Minimum Code Length
Maximum Code Length
Rectangular
Style
disabled
enabled
AHE1
AIA0
QR Family
disabled
enabled
AIA1
Postal Codes
all disabled
Australian Post - enabled
Japan Post - enabled
PLANET - enabled
POSTNET - enabled
POSTNET with B and B’ - enabled
POSTNET and PLANET - enabled
POSTNET with B and B’ and PLANET - enabled
KIX Code - enabled
Royal Mail Code (RM4SCC) - enabled
N Table
ALA0
ALA1
ALA2
ALA3
ALA4
ALA5
ALA6
ALA7
ALA8
ALA9
ALB0
Australian
Table
C Table
ALB1
AJL0
AJL1
AJM0
AJM1
AJN0
AJN1
AJO0
AJO1
AJP0
AJP1
AJQ0
AJQ1
AJR0
AJR1
AKA0
AKA2
Maxicode
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
disabled
enabled
disabled
enabled
disabled
enabled
disabled
enabled
disabled
enabled
disabled
enabled
disabled
enabled
Aztec
disabled
enabled
128
HOST CONFIGURATION STRINGS
CODE SELECTION (continued)
DESCRIPTION
Composite Code disabled
enabled
STRING
ANA0
ANA1
ANB0
ANB1
Discard Linear
Part
disabled
enabled
e =
a number from the HEX/Numeric Table
e = a number in the range 0001-3600
READING PARAMETERS
DESCRIPTION
Trigger Mode
STRING
BAA0
BAA1
BAB0
BAB1
BF0f
trigger level
trigger pulse
normal trigger
software trigger
Trigger Type
Flash On Duration
Flash Off Duration
Beeper Tone
BF1f
tone 1
tone 2
tone 3
tone 4
off
low
medium
high
GBA1
GBA2
GBA3
GBA4
GBB0
GBB1
GBB2
GBB3
GBCf
BCA0
BCA1
BEAf
Beeper Volume
Beeper Duration
Reads per Cycle
one read per cycle
multiple reads per cycle
Scan Timeout
User Defined Beeper Tone
tone 1
tone 2
tone 3
tone 4
off
low
medium
high
GBD1
GBD2
GBD3
GBD4
GBE0
GBE1
GBE2
GBE3
GBFf
User Defined Beeper Volume
User Defined Beeper Duration
Perform User Defined Beep∗∗
$?GGG
∗∗
this command carries out its specific function and does not need $+ and $-.
129
POWERSCAN® D8530
CODE ORDERING AND SELECTION
Code per Scan
one code per scan
all codes per scan
disabled
enabled
disabled
BCB0
BCB1
OAA0
OAA1
OAB0
OAB1
OAB2
Central Code Transmission
Order by Code Length
enabled - increasing order
enabled - decreasing order
f =
a number from the HEX/Numeric Table
f = a number in the range 01-99
READING PARAMETERS
DESCRIPTION
AUTOSCAN
STRING
Autoscan Mode
disabled
BBA0
BBA1
BBA2
BBB0
BBB1
BBC0
BBC1
BBD0
BBD1
BGA0
BGA1
BGBf
enabled in normal mode
enabled in pattern mode
disabled
enabled
disabled
enabled
disabled
enabled
disabled
Autoscan Aiming System
Autoscan Hardware Trigger
Autoscan Illumination System
Safety Time
enabled
Safety Time Duration
f =
a number from the HEX/Numeric Table
f = a number in the range 01-99
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 1
Basic Configuration
Image Format
JPEG format
TIFF format
full resolution (1280 x 1024)
half resolution (640 x 512)
IAA1
IAA2
IAB0
IAB1
IACg
Resolution
JPEG Quality Factor
g =
a number from the HEX/Numeric Table
g = a number in the range 000-100
130
HOST CONFIGURATION STRINGS
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 1
Advanced Configuration
Brightness
increase
decrease
increase
decrease
2 gray levels
16 gray levels
256 gray levels
IAO0IAFi
IAO1IAF1i
IAP0IAEi
IAP1IAEi
IAG0
Contrast
Color Depth
IAG1
IAG2
i =
a number from the HEX/Numeric Table
i = a number in the range 0-100
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 2
Basic Configuration
Image Format
JPEG format
TIFF format
full resolution (1280 x 1024)
half resolution (640 x 512)
IBA1
IBA2
IBB0
IBB1
IBCg
Resolution
JPEG Quality Factor
Advanced Configuration
Brightness
increase
decrease
increase
decrease
2 gray levels
16 gray levels
256 gray levels
IBO0IBFi
IBO1IBF1i
IBP0IBEi
IBP1IBEi
IBG0
Contrast
Color Depth
IBG1
IBG2
g, i =
a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
131
POWERSCAN® D8530
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 3
Basic Configuration
Image Format
JPEG format
TIFF format
full resolution (1280 x 1024)
half resolution (640 x 512)
ICA1
ICA2
ICB0
ICB1
ICCg
Resolution
JPEG Quality Factor
Advanced Configuration
Brightness
increase
decrease
increase
decrease
2 gray levels
16 gray levels
256 gray levels
ICO0ICFi
ICO1ICF1i
ICP0ICEi
ICP1ICEi
ICG0
Contrast
Color Depth
ICG1
ICG2
g, i =
a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 4
Basic Configuration
Image Format
JPEG format
TIFF format
full resolution (1280 x 1024)
half resolution (640 x 512)
IDA1
IDA2
IDB0
IDB1
IDCg
Resolution
JPEG Quality Factor
Advanced Configuration
Brightness
increase
decrease
increase
decrease
2 gray levels
16 gray levels
256 gray levels
IDO0IDFi
IDO1IDF1i
IDP0IDEi
IDP1IDEi
IDG0
Contrast
Color Depth
IDG1
IDG2
g, i =
a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
132
PROGRAMMING FOR EXPERT USERS
B
PROGRAMMING FOR EXPERT USERS
This document is addressed to expert users who are familiar with software
programming languages and want to define a personalized code formatting. The
provided programming language allows creating either simple or complex formatting
expressions by means of the basic functions connected together through the
following operators: (, ), -, +.
The syntax to be used to transmit the expressions to the PowerScan® D8530 is the
following:
$+ELB<n>formatting expression<ETX>$-
where:
−
−
−
<n> is a number in the range 1-5 corresponding to the format to be defined;
<ETX> is the conventional character used as terminator of the command;
the formatting expression uses ASCII characters when containing text strings.
For this reason, the string must be inserted between two quotation marks. The
following example shows the ASCII conversion of the "ABC" string:
$+ELB1S414243T+#DS^C$-.
FUNCTION DESCRIPTION
All the functions and conventions to be used within the formatting expressions are
listed below:
FUNCTION NAME
DESCRIPTION
FSTR
Searches for a defined substring by its starting and ending
string.
FLSTR
Searches for a defined substring by its starting string and its
length.
SSTR
FPOS
Extracts a defined substring from the original string.
Searches for a position of a defined substring within the
original string.
LSTR
ISTR
Returns a string length.
Insert a substring in the original string.
RSTR
Substitutes a defined substring contained in the original
string with a new one.
133
POWERSCAN® D8530
CONVENTIONS
DESCRIPTION
+
Concatenates two strings or fields.
-
Deletes a substring or a field from the original string.
Returns the string which has been decoded by the library.
#DS
#F<n>
Returns the result of a format which has been previously
defined. The <n> value is in the range 1-4.
FindStringByStarting&EndingChar (FSTR)
This function has the following syntax:
FSTR<source_string, string_start, string_stop, mode>Östring
This function searches for a substring having a defined starting character
("string_start") and
a
defined ending character ("string_stop") within the
"source_string". It returns the string you searched for, or an empty one in case of
failure.
If searching for a substring having characters already known, the "string_start" and
"string_stop" arguments must share the same value.
The "mode" argument allows managing the starting character ("string_start") and the
ending character ("string_stop"):
0 = include both starting and ending character
1 = include only starting character
2 = include only ending character
3 = discard both starting and ending character
FindStringByStartingChar&Len (FLSTR)
This function has the following syntax:
FLSTR<source_string, string_start, len, mode>Östring
This function searches for a substring having a defined starting character
("string_start") and a defined length ("len") within the "source_string". It returns the
string you searched for, or an empty one in case of failure.
If searching for a substring having a length already known, the "string_start" and
"string_stop" arguments must share the same number.
The "mode" argument allows managing the starting character ("string_start"):
0 = include starting character
1 = discard starting character
134
PROGRAMMING FOR EXPERT USERS
SelectString (SSTR)
This function has the following syntax:
SSTR<source_string, pos_start, pos_end>Östring
It extracts a substring whose characters are between "pos_start" and "pos_end" from
the "source_string".
If "pos_end" is longer than the "source_string" length, no error will be generated
since the exceeding characters are ignored.
The first character of every string is in position 1.
FindPosition (FPOS)
This function has the following syntax:
FPOS<source_string, search_string>Öposition
This function searches for a defined substring within the "source_string" and returns
its position. If the substring is not found, the returned value is 1.
StringLength (LSTR)
This function has the following syntax:
LSTR<string>Ölength
This function returns the length of the defined string.
StringConcatenation
This function has the following syntax:
string1 + string2Östring
This function allows concatenating two different strings in order to get a single string
as result.
135
POWERSCAN® D8530
StringDiscard
This function has the following syntax:
string1 - string2Östring
This function discards all the strings having the same value as "string2" which can be
found in "string1". If no "string2" is found within "string1", the result returns "string1".
InsertString (ISTR)
This function has the following syntax:
ISTR<source_string, string1, position>Östring
This function inserts a new string ("string1") within the "source_string" and places it in
the defined "position".
If the value of the "position" argument is longer than "source_string" length, "string1"
will be placed after the last character of the source string.
ReplaceString (RSTR)
This function has the following syntax:
RSTR<source_string, string1, string2>Östring
This function searches for "string1" within the "source_string". All the strings having
the same value as "string1" within the "source_string" will be replaced by "string2".
If no "string1" is found in the "source_string", the result returns the "source_string".
136
PROGRAMMING FOR EXPERT USERS
Examples
The string transmitted is S12345abcdef3790T and corresponds to the #DS function,
as defined in the programming language.
1) expression Ö SSTR<#DS,1,5> + SSTR<#DS,11,15> + SSTR<#DS,6,9>
result Ö S12345f3790abcdT
2) expression Ö FSTR<#DS, S616263T, S616263T, 0> + SSTR<#DS,LSTR<#DS>
-3, LSTR<#DS>
result Ö Sabc3790T
3) expression Ö FSTR<#DS, S616272T, S616261T, 0>
result Ö ST null string
4) expression Ö #DS - FSTR<#DS, S616263T, S6566T, 0>
result Ö S123453790T
During the format definition the decoded string represented by #DS does not change.
Using Format Output in Format Definition
The input used by the above functions to define the code formatting usually
corresponds to the decoded code (#DS). Actually, the formatting expression of each
function can also format the result (output) produced by a preceding code formatting.
The format output is represented as follow:
#F<n>, where:
<n> = format number in the range 1-4
#F = format output
Being Format 5 not included in other format expression, the format number is in the
range 1-4. Furthermore, since a format expression operates upon the output of the
preceding formats, the expression defining Format 1 will never contain the result of
another format.
Example
The following expression is used to define Format 3:
#DS + FSTR<#F2, S6173T, S6263T, 0>
The expression input consists of the decoded code and the result produced by
Format 2 (#F2).
The FSTR function searches for a defined substring within the #F2 result; then, it
concatenates this substring and the decoded code. The result corresponds to #F3
output.
137
POWERSCAN® D8530
C
CODE IDENTIFIER TABLE
EAN/UPC
CODABAR
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCEGOMAPFDLJK
AEFBJLBGMHPLMNBJDBAMFHOEGK
AAPHBAJJCCDBJLHEJOHAEJBBFK
AEKFAMIOGAHEOFFNJLAMEFIJKK
DLDLLLDLDLDLLLLDLDDDDLDLDL
APCPCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEEHFIK
AKCBPJCJGIIJCMCFGJKHILNJLK
AEFBJLBGMHPLMNGOJAGECBEFGK
AAPHBAJICHELJEAHOIHPKBLLFK
AFLFAIKFBDOOEJMDCFEIOGNIJK
DLLLLLDLLLLLLLLDDLDDDLDLLL
CODE 128
EAN 128
APCLGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFDEIK
AKCBPJCJGIIJCMCEGPKEHAMLLK
AEFBJLBGMHPKNKGMHMAGPDIFGK
AAPHBAJICHAPGJKOACPJFHKLBK
AHLFAOIHKPPIGNIKBLPOMOHKJK
DLLLLLDLLLDLLLLDDLDDDLDLDL
APCPGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEGJKOCJLBJK
AEFBJLBGMHPLMODJKELEOGJGGK
AAPHBAJIDHCOFOGHOJOKLEHPDK
AEKFAONHFDEIAADCBCKGGBAILK
DDDLLDDLLLDLLLLDLLDDDLDLLL
CODE 93
CODE 32
APCLGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHFGIK
AKCBPJCJGIIJCMCFGIMDAOCJJK
AEFBJLBGMHPKNKBLNNGOIFCEGK
AAPHBAJJCCHFGGNNHEPGLPABBK
AGKFAKKMNMGCMBBEKFLKGNCLKK
DLDLLLDLDLLLLLLDLDDDDLDLLL
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBCGIK
AKCBPJCJGIIJCMCEGMNHNPOLLK
AEFBJLBGMHPLNJANKACLDPEFGK
AAPHBAJICDAPKPFIDKBFCMLPBK
AHKFAPOMHMIKOKBFOEOMOENKLK
DLLLLDDLDDLLLLLDLLLDDLDLDL
CODE 39
INTERLEAVED 2 OF 5
APCLCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDFEIK
AKCBPJCJGIIJCMCEGKNNIGJBJK
AEFBJLBGMHPKMNFIHIJJCKFGGK
AAPHBAJIDDCOJIJBNBAGMPGLDK
AELFAPLMIADKIHKNONLEELKIJK
DDDLLLDLDDLLLLLDDLLDDLDLLL
APCLCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBDGIK
AKCBPJCJGIIJCMCFGNLKPIHDLK
AEFBJLBGMHPKMNCPNJPBFMPHGK
AAPHBAJJDGFEJHOCKHAJCHMBDK
AFKFALJHPDKACLDDFDPAOIPJKK
DDLLLLDLLDDLLLLDLDLDDLDLDL
PDF417
MICRO PDF417
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEBAEIK
AKCBPJCJGIIJCMCFGIPGNMEDNK
AEFBJLBGMHPKNOGALBGPKNLGGK
AAPHBAJICEHBNDJJHFEKLMPFDK
AGKFAMMJMJLMMIAKCJJKCCGLIK
DDDLLLDLLLLLLLLDLDDDDLDLLL
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFFHIK
AKCBPJCJGIIJCMCEGLJEOBIBLK
AEFBJLBGMHPLNLCIAOOOEIFEGK
AAPHBAJJDGAIHHAHIFKBIIBLDK
AGLFAPLHFKGMKJHGIDOOKBFKIK
DDDLDLDLDLLLLLLDDDDDDLDLLL
138
CODE IDENTIFIER TABLE
DATAMATRIX
MAXICODE
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCCHIK
AKCBPJCJGIIJCMCFGJJCFJLDPK
AEFBJLBGMHPLMJBFPMGFAJNHGK
AAPHBAJJCBEPCBEDOJMDKCEPHK
AFLFAOMAAGDAEANNKJGIKJJILK
DDLLLLDLDLLLLLLDDLDDDLDLLL
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEDGGIK
AKCBPJCJGIIJCMCEGPJBKCKBPK
AEFBJLBGMHPKNOBHBAAHNLBHGK
AAPHBAJJCBALNMOKADEFFEFPDK
AHLFAIOCLKCGGEJEJHNOIBDKLK
DDLLLLDLDLDLLLLDDLDDDLDLDL
QR
AUSTRALIA POST
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAEFIK
AKCBPJCJGIIJCMCEGOPFCHFBNK
AEFBJLBGMHPLMJGCFNANHPHGGK
AAPHBAJICEDFCODAJPMMEKOFHK
AEKFAKOLHFKKOMEDBHCMAKMJIK
DDDLLLDLLLDLLLLDLDDDDLDLDL
AODKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCEGLIMNBALPK
AEFBJLBGMHPLNOFGFJJCKGKFGK
AAPHBAJIDABENPAPEMDDNCCFFK
AHKFALNAFKGIAGGEOBGGIPBLIK
DLLLLLDLDDLLLLLDLDLDDLDLLL
JAPAN POST
POSTNET
AODOGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFFIK
AKCBPJCJGIIJCMCFGPJIAAMJNK
AEFBJLBGMHPKNNEACENHBMMEGK
AAPHBAJJDBGOBGIKACNAEBJLFK
AGKFAOJAPKIACNGFKADAAGOKJK
DLDLLDDLDLLLLLLDLLDDDLDLDL
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGDFIK
AKCBPJCJGIIJCMCFGKOBPGJDPK
AEFBJLBGMHPKMKHECAEIMFBHGK
AAPHBAJJCFEPOHLFNBCPNJFLHK
AFKFAPKLNFECMHECFGHKIDDIJK
DDLLLDDLLDDLLLLDLLLDDLDLLL
PLANET
GS1 DATABAR
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDHIK
AKCBPJCJGIIJCMCEGIPPHOCLPK
AEFBJLBGMHPKNNDHIFLPGKGFGK
AAPHBAJIDEBEBJPJHENPKJDBFK
AHLFAKLLIJBKIBPLBOHEKFLLKK
DLLLLDDLLLDLLLLDDDDDDLDLLL
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGNIGIIHBNK
AEFBJLBGMHPKMKADIBCALDLGGK
AAPHBAJICADFOIMGKHCADBPBHK
AELFALIAKGNIGLNMOIDOCAGJKK
DDDLLDDLDDLLLLLDDDLDDLDLDL
KIX CODE
RM4SCC
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCFGLIFHDGDNK
AEFBJLBGMHPLNNABGNECGBHGGK
AAPHBAJICAHBBFGPENKGMHOBDK
AGLFANKCBKMOEPJFNGIIAIMLKK
DDDLLDDLDDDLLLLDDDLDDLDLLL
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEHHEIK
AKCBPJCJGIIJCMCEGMOCANIBPK
AEFBJLBGMHPLNNHGMMCKBHNHGK
AAPHBAJJCFALBKBMDLKJCPELDK
AHKFAJIJGJFEODALGIMMKLJKJK
DDLLLDDLLDLLLLLDLLLDDLDLDL
AZTEC
AODKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFEEHIK
AKCBPJCJGIIJCMCFGMOLKPOJNK
AEFBJLBGMHPLNOCBPIPKNAAEGK
AAPHBAJJDFGONAHMDKDMDKIPFK
AGLFAPPLCJPCKKPKFPCCCMEKLK
DLDLLLDLLDDLLLLDDLLDDLDLDL
139
POWERSCAN® D8530
D
HEX AND NUMERIC TABLE
CHARACTER TO HEX CONVERSION TABLE
char
decimal
hex
char
decimal
hex
char
decimal
hex
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
HT
LF
VT
FF
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
*
+
,
-
.
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
U
V
W
X
Y
Z
[
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
55
56
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
/
0
1
2
3
4
5
6
7
8
9
:
\
]
^
_
`
a
b
c
d
e
f
g
h
i
j
k
l
CR
SO
SI
DLE
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
SUB
ESC
FS
GS
RS
;
<
=
>
?
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
m
n
o
p
q
r
s
t
US
SPACE
u
v
w
x
y
z
{
|
}
!
"
#
$
%
&
'
(
)
~
DEL
140
HEX AND NUMERIC TABLE
0
1
ANFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHBHIK
AKCBPJCJGIIJCMCFGPOFMJLDJK
AEFBJLBGMHPKNIFGJCGBBDNHGK
AAPHBAJJDEBJCDJAGBDLGHNFHK
AFKEBJJPCPKMAJNAMBKKKCFJKK
DLDLLLDDDLLLLLLDLLDDDLDLLL
ANEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHPLFIKNHNK
AEFBJLBGMHPKMKGPIEMNLKLEGK
AAPHBAJIDGFBMBLDDDNIEPNNFK
AEKEBJMNMOKOIOPNEFCOIJJLJK
DLDLLLDDLDDLLLLDDDLDDLDLLL
2
ANEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFGHIK
AKCBPJCJGIIJCMCEGMILJPPDNK
AEFBJLBGMHPKMKEKGKAMOGNEGK
AAPHBAJJDEFNLJHLIGJCCKKLDK
AELEBMKKGLEGCCHPLDIKICJLLK
DDLLLLDDDLDLLLLDLLLDDLDLLL
3
4
AMFPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGKLNLGILJK
AEFBJLBGMHPLNJDDOKGPBMIGGK
AAPHBAJIDCBNPBJGGNKINPEPFK
AGLEBMONMCIOAPCIABBMOFHJJK
DLLLLLDDLLLLLLLDLLLDDLDLDL
AMFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEAFHIK
AKCBPJCJGIIJCMCFHJIDKDKPJK
AEFBJLBGMHPLNJBGAEKOEAOGGK
AAPHBAJJDABBIJFONIOCLKDJDK
AGKEBJIKGHGGKDKKPHLIOOHJLK
DDDLLLDDDDLLLLLDDDLDDLDLDL
141
POWERSCAN® D8530
5
6
AMEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGJNDOAMLNK
AEFBJLBGMHPLMLCPBCACOJIFGK
AAPHBAJIDCFJGLHNIKABJCDBBK
AHKEBJNIIGGECEIHHDDMMFLLIK
DDDLLLDDLLDLLLLDLLDDDLDLDL
AMEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCCHIK
AKCBPJCJGIIJCMCEHKONPFOPNK
AEFBJLBGMHPLMLAKPMMDLFOFGK
AAPHBAJJDAFFBDLFDPELPHEHHK
AHLEBMLPCDIMIIAFIFJIMOLLKK
DLLLLLDDDDDLLLLDDDDDDLDLDL
7
ANFNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCHFIK
AKCBPJCJGIIJCMCEHJLAGJEHJK
AEFBJLBGMHPKMMHJBODNLMGFGK
AAPHBAJIDFBCOHNDCJGDNMAPDK
AHKEBNOMACIOMCLCEECKCIFKLK
DDLLLLDDDDLLLLLDDLLDDLDLDL
8
9
ANFMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGKIOHMGDJK
AEFBJLBGMHPKMMFMPAPMOAAFGK
AAPHBAJJDHBOJPBLJMCJLJHJFK
AHLEBIILKHGGGODALCIOCDFKJK
DLDLLLDDLLLLLLLDLDLDDLDLDL
ANENGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHKNODPAHNK
AEFBJLBGMHPKNOGFOGFAEJGGGK
AAPHBAJIDFFGHNDIMOMKJBHBHK
AGLEBINJEGGEOJBNDGAKAIJIKK
DLDLLLDDDDDLLLLDDLDDDLDLDL
142
HEX AND NUMERIC TABLE
A
B
APCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFABHIK
AKCBPJCJGIIJCMCEHLIFKKKFJK
AEFBJLBGMHPKNMFGFGAOPLOGGK
AAPHBAJJDAECFFJNDGOFJPBHFK
AFKEBKMFNHHIOOPEFNLCMAMLLK
DLLLLLDDLDDLLLLDDLDDDLDLLL
APCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCDEIK
AKCBPJCJGIIJCMCEGILLLPIBJK
AEFBJLBGMHPKNMHDLIMPKHIGGK
AAPHBAJIDCEOCNFFIDKPPKGBDK
AFLEBPKCHCJAECHGKLBGMLMLJK
DDDLLLDDDLDLLLLDLDDDDLDLLL
C
D
AODPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFGOINJGPJNK
AEFBJLBGMHPLMPAKDIKMFNNEGK
AAPHBAJJDEAOGFLIGIJFAPIFFK
AHLEBPOFNLFIGPCBBJIAKMCJLK
DLDLLLDDLLLLLLLDLDDDDLDLDL
AODOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHAEIK
AKCBPJCJGIIJCMCFHNLDIDNNNK
AEFBJLBGMHPLMPCPNGGNABLEGK
AAPHBAJIDGACBNHANNNPGKPDDK
AHKEBKICHOLAMDKDOPCEKHCJJK
DDLLLLDDDDLLLLLDDLDDDLDLDL
E
F
AOCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCEGNODMALJJK
AEFBJLBGMHPLNNBGMAMBKINHGK
AAPHBAJJDEEKPPFDIPDMECPLBK
AGKEBKNAJPLCEEIOGLKAIMOLKK
DDLLLLDDLLDLLLLDLDLDDLDLDL
AOCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCEHONNNFJNJK
AEFBJLBGMHPLNNDDCOAAPELHGK
AAPHBAJIDGEGIHJLDKHGCHINHK
AGLEBPLHDKFKOIAMJNAEIHOLIK
DLDLLLDDDDDLLLLDDLLDDLDLDL
143
POWERSCAN® D8530
AUTOSCAN PATTERN CODE
ÌÄÄsÎ
144
NOTES
NOTES
EC-049
REV.: 0
DECLARATION OF CONFORMITY
Pag.: 1 di 1
08
Datalogic Scanning Group Srl
Via S. Vitalino, 13
Lippo di Calderara di Reno (BO)
40012
Italy
dichiara che
declares that the
déclare que le
bescheinigt ,daß das Gerät
declare que el
POWERSCAN D8530 ; 2D Reader
e tutti i suoi modelli
and all its models
et tous les modèles
und seine modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below
sont conformes aux spécifications des Directives de l’Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
89/336/EEC EMC Directive
e
and
et
und
y
92/31/EEC, 93/68 /EEC
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed
alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility
and product safety.
Basée sur la législation des Etats membres relative à la compatibilté électromagnétique et à la
sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische
Verträglichkeit und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 ( CLASS A ITE ), AUGUST 1994:
AMENDMENT A1 ( CLASS A ITE ), OCTOBER 2000:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION
TECHNOLOGY EQUIPMENT
EN 61000-6-2, OCTOBER 2001:
ELECTROMAGNETIC COMPATIBILITY (EMC)
PART 6-2: GENERIC STANDARDS
INDUSTRIAL ENVIRONMENTS
Ruggero Cacioppo
-
IMMUNITY FOR
Lippo di Calderara, February 11th , 2008
Quality Assurance Manager
|